diff --git a/build/make.linux64.lib.py b/build/make.linux64.lib.py index 7fbf0e5..86fe8ba 100644 --- a/build/make.linux64.lib.py +++ b/build/make.linux64.lib.py @@ -18,6 +18,7 @@ doinstall = True #copies the build_output to the install dir when finished cc = "g++" #compiler cflags = "-fPIC" libraries = "-l{} -lamscppfont4.linux64 -lamsstring4.linux64 -lamscppimglib4.linux64 -lamscimglib4.linux64 -lamsmathutil25.linux64".format(libname) +libraries += " -lfreetype -lbrotlidec -lbrotlicommon -lharfbuzz -lpng -lbz2 -lz" libdirs = "-L{} -L{}/lib -L{}/lib".format(builddir,commondir,depdir) linkerflags = "-static-libstdc++ -static-libgcc -Wl,-rpath=." srcexts = [".c",".cpp"] diff --git a/build/make.linux64.test.py b/build/make.linux64.test.py index aff6d04..3759a9b 100644 --- a/build/make.linux64.test.py +++ b/build/make.linux64.test.py @@ -18,6 +18,7 @@ doinstall = True #copies the build_output to the install dir when finished cc = "g++" #compiler cflags = "-fPIC" libraries = "-l{} -lamscppfont4.linux64 -lamsstring4.linux64 -lamscppimglib4.linux64 -lamscimglib4.linux64 -lamsmathutil25.linux64".format(libname) +libraries += " -lfreetype -lbrotlidec -lbrotlicommon -lharfbuzz -lpng -lbz2 -lz" libdirs = "-L{} -L{}/lib -L{}/lib".format(builddir,commondir,depdir) linkerflags = "-static-libstdc++ -static-libgcc -Wl,-rpath=." srcexts = [".c",".cpp"] diff --git a/build/make.mingw64.lib.py b/build/make.mingw64.lib.py index 7b0c55b..1fac4fa 100644 --- a/build/make.mingw64.lib.py +++ b/build/make.mingw64.lib.py @@ -18,6 +18,7 @@ doinstall = True #copies the build_output to the install dir when finished cc = "x86_64-w64-mingw32-g++" #compiler cflags = "-fPIC -O3" libraries = "-l{} -lamscppfont4.mingw64 -lamsstring4.mingw64 -lamscppimglib4.mingw64 -lamscimglib4.winx64 -lamsmathutil25.mingw64".format(libname) +libraries += " -lfreetype -lbrotlidec -lbrotlicommon -lharfbuzz -lpng -lbz2 -lz" libdirs = "-L{} -L{}/lib -L{}/lib".format(builddir,commondir,depdir) linkerflags = "-static -static-libgcc -Wl,-rpath=." srcexts = [".c",".cpp"] diff --git a/build/make.mingw64.test.py b/build/make.mingw64.test.py index 8c51af8..5e6eea4 100644 --- a/build/make.mingw64.test.py +++ b/build/make.mingw64.test.py @@ -18,6 +18,7 @@ doinstall = True #copies the build_output to the install dir when finished cc = "x86_64-w64-mingw32-g++" #compiler cflags = "-fPIC -O3" libraries = "-l{} -lamscppfont4.mingw64 -lamsstring4.mingw64 -lamscppimglib4.mingw64 -lamscimglib4.winx64 -lamsmathutil25.mingw64".format(libname) +libraries += " -lfreetype -lbrotlidec -lbrotlicommon -lharfbuzz -lpng -lbz2 -lz" libdirs = "-L{} -L{}/lib -L{}/lib".format(builddir,commondir,depdir) linkerflags = "-static -static-libgcc -Wl,-rpath=." srcexts = [".c",".cpp"] diff --git a/build_linux64/libamscimglib4.linux64.so b/build_linux64/libamscimglib4.linux64.so index fe55311..c48ace3 100644 Binary files a/build_linux64/libamscimglib4.linux64.so and b/build_linux64/libamscimglib4.linux64.so differ diff --git a/build_linux64/libamsfontconverter4.linux64.a b/build_linux64/libamsfontconverter4.linux64.a index 53b1030..7f7c9f3 100644 Binary files a/build_linux64/libamsfontconverter4.linux64.a and b/build_linux64/libamsfontconverter4.linux64.a differ diff --git a/build_linux64/objstore/amsfontconverter4_tests1.o b/build_linux64/objstore/amsfontconverter4_tests1.o new file mode 100644 index 0000000..9bd5f01 Binary files /dev/null and b/build_linux64/objstore/amsfontconverter4_tests1.o differ diff --git a/build_linux64/tests b/build_linux64/tests index 8348d36..412c41d 100644 Binary files a/build_linux64/tests and b/build_linux64/tests differ diff --git a/dependencies/LICENSE_libpng b/dependencies/LICENSE_libpng new file mode 100644 index 0000000..ea6df98 --- /dev/null +++ b/dependencies/LICENSE_libpng @@ -0,0 +1,134 @@ +COPYRIGHT NOTICE, DISCLAIMER, and LICENSE +========================================= + +PNG Reference Library License version 2 +--------------------------------------- + + * Copyright (c) 1995-2025 The PNG Reference Library Authors. + * Copyright (c) 2018-2025 Cosmin Truta. + * Copyright (c) 2000-2002, 2004, 2006-2018 Glenn Randers-Pehrson. + * Copyright (c) 1996-1997 Andreas Dilger. + * Copyright (c) 1995-1996 Guy Eric Schalnat, Group 42, Inc. + +The software is supplied "as is", without warranty of any kind, +express or implied, including, without limitation, the warranties +of merchantability, fitness for a particular purpose, title, and +non-infringement. In no event shall the Copyright owners, or +anyone distributing the software, be liable for any damages or +other liability, whether in contract, tort or otherwise, arising +from, out of, or in connection with the software, or the use or +other dealings in the software, even if advised of the possibility +of such damage. + +Permission is hereby granted to use, copy, modify, and distribute +this software, or portions hereof, for any purpose, without fee, +subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you + must not claim that you wrote the original software. If you + use this software in a product, an acknowledgment in the product + documentation would be appreciated, but is not required. + + 2. Altered source versions must be plainly marked as such, and must + not be misrepresented as being the original software. + + 3. This Copyright notice may not be removed or altered from any + source or altered source distribution. + + +PNG Reference Library License version 1 (for libpng 0.5 through 1.6.35) +----------------------------------------------------------------------- + +libpng versions 1.0.7, July 1, 2000, through 1.6.35, July 15, 2018 are +Copyright (c) 2000-2002, 2004, 2006-2018 Glenn Randers-Pehrson, are +derived from libpng-1.0.6, and are distributed according to the same +disclaimer and license as libpng-1.0.6 with the following individuals +added to the list of Contributing Authors: + + Simon-Pierre Cadieux + Eric S. Raymond + Mans Rullgard + Cosmin Truta + Gilles Vollant + James Yu + Mandar Sahastrabuddhe + Google Inc. + Vadim Barkov + +and with the following additions to the disclaimer: + + There is no warranty against interference with your enjoyment of + the library or against infringement. There is no warranty that our + efforts or the library will fulfill any of your particular purposes + or needs. This library is provided with all faults, and the entire + risk of satisfactory quality, performance, accuracy, and effort is + with the user. + +Some files in the "contrib" directory and some configure-generated +files that are distributed with libpng have other copyright owners, and +are released under other open source licenses. + +libpng versions 0.97, January 1998, through 1.0.6, March 20, 2000, are +Copyright (c) 1998-2000 Glenn Randers-Pehrson, are derived from +libpng-0.96, and are distributed according to the same disclaimer and +license as libpng-0.96, with the following individuals added to the +list of Contributing Authors: + + Tom Lane + Glenn Randers-Pehrson + Willem van Schaik + +libpng versions 0.89, June 1996, through 0.96, May 1997, are +Copyright (c) 1996-1997 Andreas Dilger, are derived from libpng-0.88, +and are distributed according to the same disclaimer and license as +libpng-0.88, with the following individuals added to the list of +Contributing Authors: + + John Bowler + Kevin Bracey + Sam Bushell + Magnus Holmgren + Greg Roelofs + Tom Tanner + +Some files in the "scripts" directory have other copyright owners, +but are released under this license. + +libpng versions 0.5, May 1995, through 0.88, January 1996, are +Copyright (c) 1995-1996 Guy Eric Schalnat, Group 42, Inc. + +For the purposes of this copyright and license, "Contributing Authors" +is defined as the following set of individuals: + + Andreas Dilger + Dave Martindale + Guy Eric Schalnat + Paul Schmidt + Tim Wegner + +The PNG Reference Library is supplied "AS IS". The Contributing +Authors and Group 42, Inc. disclaim all warranties, expressed or +implied, including, without limitation, the warranties of +merchantability and of fitness for any purpose. The Contributing +Authors and Group 42, Inc. assume no liability for direct, indirect, +incidental, special, exemplary, or consequential damages, which may +result from the use of the PNG Reference Library, even if advised of +the possibility of such damage. + +Permission is hereby granted to use, copy, modify, and distribute this +source code, or portions hereof, for any purpose, without fee, subject +to the following restrictions: + + 1. The origin of this source code must not be misrepresented. + + 2. Altered versions must be plainly marked as such and must not + be misrepresented as being the original source. + + 3. This Copyright notice may not be removed or altered from any + source or altered source distribution. + +The Contributing Authors and Group 42, Inc. specifically permit, +without fee, and encourage the use of this source code as a component +to supporting the PNG file format in commercial products. If you use +this source code in a product, acknowledgment is not required but would +be appreciated. diff --git a/dependencies/LICENSE_libz b/dependencies/LICENSE_libz new file mode 100644 index 0000000..ab8ee6f --- /dev/null +++ b/dependencies/LICENSE_libz @@ -0,0 +1,22 @@ +Copyright notice: + + (C) 1995-2022 Jean-loup Gailly and Mark Adler + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. + + Jean-loup Gailly Mark Adler + jloup@gzip.org madler@alumni.caltech.edu diff --git a/dependencies/README_PrecompiledDependencies.txt b/dependencies/README_PrecompiledDependencies.txt index 30ca408..ccef11a 100644 --- a/dependencies/README_PrecompiledDependencies.txt +++ b/dependencies/README_PrecompiledDependencies.txt @@ -7,6 +7,14 @@ LIBRARY LIST: FreeType 2.13.3 HarfBuzz 11.2.1 +libpng 1.6.47 +libbz2 1.0.8 +libz 1.3.1 + + +libbz2 + source: https://github.com/libarchive/bzip2 + source: https://sourceware.org/bzip2/ A list of each library's own depenencies is given below: @@ -14,7 +22,8 @@ LIBRARY DEPENDENCY LIST: freetype libharfbuzz - libbz2 + libbrotlidec libpng + libbz2 libz - libbrotlidec \ No newline at end of file + diff --git a/dependencies/linux64/include/brotli/decode.h b/dependencies/linux64/include/brotli/decode.h new file mode 100644 index 0000000..af1aa23 --- /dev/null +++ b/dependencies/linux64/include/brotli/decode.h @@ -0,0 +1,409 @@ +/* Copyright 2013 Google Inc. All Rights Reserved. + + Distributed under MIT license. + See file LICENSE for detail or copy at https://opensource.org/licenses/MIT +*/ + +/** + * @file + * API for Brotli decompression. + */ + +#ifndef BROTLI_DEC_DECODE_H_ +#define BROTLI_DEC_DECODE_H_ + +#include +#include +#include + +#if defined(__cplusplus) || defined(c_plusplus) +extern "C" { +#endif + +/** + * Opaque structure that holds decoder state. + * + * Allocated and initialized with ::BrotliDecoderCreateInstance. + * Cleaned up and deallocated with ::BrotliDecoderDestroyInstance. + */ +typedef struct BrotliDecoderStateStruct BrotliDecoderState; + +/** + * Result type for ::BrotliDecoderDecompress and + * ::BrotliDecoderDecompressStream functions. + */ +typedef enum { + /** Decoding error, e.g. corrupted input or memory allocation problem. */ + BROTLI_DECODER_RESULT_ERROR = 0, + /** Decoding successfully completed. */ + BROTLI_DECODER_RESULT_SUCCESS = 1, + /** Partially done; should be called again with more input. */ + BROTLI_DECODER_RESULT_NEEDS_MORE_INPUT = 2, + /** Partially done; should be called again with more output. */ + BROTLI_DECODER_RESULT_NEEDS_MORE_OUTPUT = 3 +} BrotliDecoderResult; + +/** + * Template that evaluates items of ::BrotliDecoderErrorCode. + * + * Example: @code {.cpp} + * // Log Brotli error code. + * switch (brotliDecoderErrorCode) { + * #define CASE_(PREFIX, NAME, CODE) \ + * case BROTLI_DECODER ## PREFIX ## NAME: \ + * LOG(INFO) << "error code:" << #NAME; \ + * break; + * #define NEWLINE_ + * BROTLI_DECODER_ERROR_CODES_LIST(CASE_, NEWLINE_) + * #undef CASE_ + * #undef NEWLINE_ + * default: LOG(FATAL) << "unknown brotli error code"; + * } + * @endcode + */ +#define BROTLI_DECODER_ERROR_CODES_LIST(BROTLI_ERROR_CODE, SEPARATOR) \ + BROTLI_ERROR_CODE(_, NO_ERROR, 0) SEPARATOR \ + /* Same as BrotliDecoderResult values */ \ + BROTLI_ERROR_CODE(_, SUCCESS, 1) SEPARATOR \ + BROTLI_ERROR_CODE(_, NEEDS_MORE_INPUT, 2) SEPARATOR \ + BROTLI_ERROR_CODE(_, NEEDS_MORE_OUTPUT, 3) SEPARATOR \ + \ + /* Errors caused by invalid input */ \ + BROTLI_ERROR_CODE(_ERROR_FORMAT_, EXUBERANT_NIBBLE, -1) SEPARATOR \ + BROTLI_ERROR_CODE(_ERROR_FORMAT_, RESERVED, -2) SEPARATOR \ + BROTLI_ERROR_CODE(_ERROR_FORMAT_, EXUBERANT_META_NIBBLE, -3) SEPARATOR \ + BROTLI_ERROR_CODE(_ERROR_FORMAT_, SIMPLE_HUFFMAN_ALPHABET, -4) SEPARATOR \ + BROTLI_ERROR_CODE(_ERROR_FORMAT_, SIMPLE_HUFFMAN_SAME, -5) SEPARATOR \ + BROTLI_ERROR_CODE(_ERROR_FORMAT_, CL_SPACE, -6) SEPARATOR \ + BROTLI_ERROR_CODE(_ERROR_FORMAT_, HUFFMAN_SPACE, -7) SEPARATOR \ + BROTLI_ERROR_CODE(_ERROR_FORMAT_, CONTEXT_MAP_REPEAT, -8) SEPARATOR \ + BROTLI_ERROR_CODE(_ERROR_FORMAT_, BLOCK_LENGTH_1, -9) SEPARATOR \ + BROTLI_ERROR_CODE(_ERROR_FORMAT_, BLOCK_LENGTH_2, -10) SEPARATOR \ + BROTLI_ERROR_CODE(_ERROR_FORMAT_, TRANSFORM, -11) SEPARATOR \ + BROTLI_ERROR_CODE(_ERROR_FORMAT_, DICTIONARY, -12) SEPARATOR \ + BROTLI_ERROR_CODE(_ERROR_FORMAT_, WINDOW_BITS, -13) SEPARATOR \ + BROTLI_ERROR_CODE(_ERROR_FORMAT_, PADDING_1, -14) SEPARATOR \ + BROTLI_ERROR_CODE(_ERROR_FORMAT_, PADDING_2, -15) SEPARATOR \ + BROTLI_ERROR_CODE(_ERROR_FORMAT_, DISTANCE, -16) SEPARATOR \ + \ + /* -17 code is reserved */ \ + \ + BROTLI_ERROR_CODE(_ERROR_, COMPOUND_DICTIONARY, -18) SEPARATOR \ + BROTLI_ERROR_CODE(_ERROR_, DICTIONARY_NOT_SET, -19) SEPARATOR \ + BROTLI_ERROR_CODE(_ERROR_, INVALID_ARGUMENTS, -20) SEPARATOR \ + \ + /* Memory allocation problems */ \ + BROTLI_ERROR_CODE(_ERROR_ALLOC_, CONTEXT_MODES, -21) SEPARATOR \ + /* Literal, insert and distance trees together */ \ + BROTLI_ERROR_CODE(_ERROR_ALLOC_, TREE_GROUPS, -22) SEPARATOR \ + /* -23..-24 codes are reserved for distinct tree groups */ \ + BROTLI_ERROR_CODE(_ERROR_ALLOC_, CONTEXT_MAP, -25) SEPARATOR \ + BROTLI_ERROR_CODE(_ERROR_ALLOC_, RING_BUFFER_1, -26) SEPARATOR \ + BROTLI_ERROR_CODE(_ERROR_ALLOC_, RING_BUFFER_2, -27) SEPARATOR \ + /* -28..-29 codes are reserved for dynamic ring-buffer allocation */ \ + BROTLI_ERROR_CODE(_ERROR_ALLOC_, BLOCK_TYPE_TREES, -30) SEPARATOR \ + \ + /* "Impossible" states */ \ + BROTLI_ERROR_CODE(_ERROR_, UNREACHABLE, -31) + +/** + * Error code for detailed logging / production debugging. + * + * See ::BrotliDecoderGetErrorCode and ::BROTLI_LAST_ERROR_CODE. + */ +typedef enum { +#define BROTLI_COMMA_ , +#define BROTLI_ERROR_CODE_ENUM_ITEM_(PREFIX, NAME, CODE) \ + BROTLI_DECODER ## PREFIX ## NAME = CODE + BROTLI_DECODER_ERROR_CODES_LIST(BROTLI_ERROR_CODE_ENUM_ITEM_, BROTLI_COMMA_) +} BrotliDecoderErrorCode; +#undef BROTLI_ERROR_CODE_ENUM_ITEM_ +#undef BROTLI_COMMA_ + +/** + * The value of the last error code, negative integer. + * + * All other error code values are in the range from ::BROTLI_LAST_ERROR_CODE + * to @c -1. There are also 4 other possible non-error codes @c 0 .. @c 3 in + * ::BrotliDecoderErrorCode enumeration. + */ +#define BROTLI_LAST_ERROR_CODE BROTLI_DECODER_ERROR_UNREACHABLE + +/** Options to be used with ::BrotliDecoderSetParameter. */ +typedef enum BrotliDecoderParameter { + /** + * Disable "canny" ring buffer allocation strategy. + * + * Ring buffer is allocated according to window size, despite the real size of + * the content. + */ + BROTLI_DECODER_PARAM_DISABLE_RING_BUFFER_REALLOCATION = 0, + /** + * Flag that determines if "Large Window Brotli" is used. + */ + BROTLI_DECODER_PARAM_LARGE_WINDOW = 1 +} BrotliDecoderParameter; + +/** + * Sets the specified parameter to the given decoder instance. + * + * @param state decoder instance + * @param param parameter to set + * @param value new parameter value + * @returns ::BROTLI_FALSE if parameter is unrecognized, or value is invalid + * @returns ::BROTLI_TRUE if value is accepted + */ +BROTLI_DEC_API BROTLI_BOOL BrotliDecoderSetParameter( + BrotliDecoderState* state, BrotliDecoderParameter param, uint32_t value); + +/** + * Adds LZ77 prefix dictionary, adds or replaces built-in static dictionary and + * transforms. + * + * Attached dictionary ownership is not transferred. + * Data provided to this method should be kept accessible until + * decoding is finished and decoder instance is destroyed. + * + * @note Dictionaries can NOT be attached after actual decoding is started. + * + * @param state decoder instance + * @param type dictionary data format + * @param data_size length of memory region pointed by @p data + * @param data dictionary data in format corresponding to @p type + * @returns ::BROTLI_FALSE if dictionary is corrupted, + * or dictionary count limit is reached + * @returns ::BROTLI_TRUE if dictionary is accepted / attached + */ +BROTLI_DEC_API BROTLI_BOOL BrotliDecoderAttachDictionary( + BrotliDecoderState* state, BrotliSharedDictionaryType type, + size_t data_size, const uint8_t data[BROTLI_ARRAY_PARAM(data_size)]); + +/** + * Creates an instance of ::BrotliDecoderState and initializes it. + * + * The instance can be used once for decoding and should then be destroyed with + * ::BrotliDecoderDestroyInstance, it cannot be reused for a new decoding + * session. + * + * @p alloc_func and @p free_func @b MUST be both zero or both non-zero. In the + * case they are both zero, default memory allocators are used. @p opaque is + * passed to @p alloc_func and @p free_func when they are called. @p free_func + * has to return without doing anything when asked to free a NULL pointer. + * + * @param alloc_func custom memory allocation function + * @param free_func custom memory free function + * @param opaque custom memory manager handle + * @returns @c 0 if instance can not be allocated or initialized + * @returns pointer to initialized ::BrotliDecoderState otherwise + */ +BROTLI_DEC_API BrotliDecoderState* BrotliDecoderCreateInstance( + brotli_alloc_func alloc_func, brotli_free_func free_func, void* opaque); + +/** + * Deinitializes and frees ::BrotliDecoderState instance. + * + * @param state decoder instance to be cleaned up and deallocated + */ +BROTLI_DEC_API void BrotliDecoderDestroyInstance(BrotliDecoderState* state); + +/** + * Performs one-shot memory-to-memory decompression. + * + * Decompresses the data in @p encoded_buffer into @p decoded_buffer, and sets + * @p *decoded_size to the decompressed length. + * + * @param encoded_size size of @p encoded_buffer + * @param encoded_buffer compressed data buffer with at least @p encoded_size + * addressable bytes + * @param[in, out] decoded_size @b in: size of @p decoded_buffer; \n + * @b out: length of decompressed data written to + * @p decoded_buffer + * @param decoded_buffer decompressed data destination buffer + * @returns ::BROTLI_DECODER_RESULT_ERROR if input is corrupted, memory + * allocation failed, or @p decoded_buffer is not large enough; + * @returns ::BROTLI_DECODER_RESULT_SUCCESS otherwise + */ +BROTLI_DEC_API BrotliDecoderResult BrotliDecoderDecompress( + size_t encoded_size, + const uint8_t encoded_buffer[BROTLI_ARRAY_PARAM(encoded_size)], + size_t* decoded_size, + uint8_t decoded_buffer[BROTLI_ARRAY_PARAM(*decoded_size)]); + +/** + * Decompresses the input stream to the output stream. + * + * The values @p *available_in and @p *available_out must specify the number of + * bytes addressable at @p *next_in and @p *next_out respectively. + * When @p *available_out is @c 0, @p next_out is allowed to be @c NULL. + * + * After each call, @p *available_in will be decremented by the amount of input + * bytes consumed, and the @p *next_in pointer will be incremented by that + * amount. Similarly, @p *available_out will be decremented by the amount of + * output bytes written, and the @p *next_out pointer will be incremented by + * that amount. + * + * @p total_out, if it is not a null-pointer, will be set to the number + * of bytes decompressed since the last @p state initialization. + * + * @note Input is never overconsumed, so @p next_in and @p available_in could be + * passed to the next consumer after decoding is complete. + * + * @param state decoder instance + * @param[in, out] available_in @b in: amount of available input; \n + * @b out: amount of unused input + * @param[in, out] next_in pointer to the next compressed byte + * @param[in, out] available_out @b in: length of output buffer; \n + * @b out: remaining size of output buffer + * @param[in, out] next_out output buffer cursor; + * can be @c NULL if @p available_out is @c 0 + * @param[out] total_out number of bytes decompressed so far; can be @c NULL + * @returns ::BROTLI_DECODER_RESULT_ERROR if input is corrupted, memory + * allocation failed, arguments were invalid, etc.; + * use ::BrotliDecoderGetErrorCode to get detailed error code + * @returns ::BROTLI_DECODER_RESULT_NEEDS_MORE_INPUT decoding is blocked until + * more input data is provided + * @returns ::BROTLI_DECODER_RESULT_NEEDS_MORE_OUTPUT decoding is blocked until + * more output space is provided + * @returns ::BROTLI_DECODER_RESULT_SUCCESS decoding is finished, no more + * input might be consumed and no more output will be produced + */ +BROTLI_DEC_API BrotliDecoderResult BrotliDecoderDecompressStream( + BrotliDecoderState* state, size_t* available_in, const uint8_t** next_in, + size_t* available_out, uint8_t** next_out, size_t* total_out); + +/** + * Checks if decoder has more output. + * + * @param state decoder instance + * @returns ::BROTLI_TRUE, if decoder has some unconsumed output + * @returns ::BROTLI_FALSE otherwise + */ +BROTLI_DEC_API BROTLI_BOOL BrotliDecoderHasMoreOutput( + const BrotliDecoderState* state); + +/** + * Acquires pointer to internal output buffer. + * + * This method is used to make language bindings easier and more efficient: + * -# push data to ::BrotliDecoderDecompressStream, + * until ::BROTLI_DECODER_RESULT_NEEDS_MORE_OUTPUT is reported + * -# use ::BrotliDecoderTakeOutput to peek bytes and copy to language-specific + * entity + * + * Also this could be useful if there is an output stream that is able to + * consume all the provided data (e.g. when data is saved to file system). + * + * @attention After every call to ::BrotliDecoderTakeOutput @p *size bytes of + * output are considered consumed for all consecutive calls to the + * instance methods; returned pointer becomes invalidated as well. + * + * @note Decoder output is not guaranteed to be contiguous. This means that + * after the size-unrestricted call to ::BrotliDecoderTakeOutput, + * immediate next call to ::BrotliDecoderTakeOutput may return more data. + * + * @param state decoder instance + * @param[in, out] size @b in: number of bytes caller is ready to take, @c 0 if + * any amount could be handled; \n + * @b out: amount of data pointed by returned pointer and + * considered consumed; \n + * out value is never greater than in value, unless it is @c 0 + * @returns pointer to output data + */ +BROTLI_DEC_API const uint8_t* BrotliDecoderTakeOutput( + BrotliDecoderState* state, size_t* size); + +/** + * Checks if instance has already consumed input. + * + * Instance that returns ::BROTLI_FALSE is considered "fresh" and could be + * reused. + * + * @param state decoder instance + * @returns ::BROTLI_TRUE if decoder has already used some input bytes + * @returns ::BROTLI_FALSE otherwise + */ +BROTLI_DEC_API BROTLI_BOOL BrotliDecoderIsUsed(const BrotliDecoderState* state); + +/** + * Checks if decoder instance reached the final state. + * + * @param state decoder instance + * @returns ::BROTLI_TRUE if decoder is in a state where it reached the end of + * the input and produced all of the output + * @returns ::BROTLI_FALSE otherwise + */ +BROTLI_DEC_API BROTLI_BOOL BrotliDecoderIsFinished( + const BrotliDecoderState* state); + +/** + * Acquires a detailed error code. + * + * Should be used only after ::BrotliDecoderDecompressStream returns + * ::BROTLI_DECODER_RESULT_ERROR. + * + * See also ::BrotliDecoderErrorString + * + * @param state decoder instance + * @returns last saved error code + */ +BROTLI_DEC_API BrotliDecoderErrorCode BrotliDecoderGetErrorCode( + const BrotliDecoderState* state); + +/** + * Converts error code to a c-string. + */ +BROTLI_DEC_API const char* BrotliDecoderErrorString(BrotliDecoderErrorCode c); + +/** + * Gets a decoder library version. + * + * Look at BROTLI_MAKE_HEX_VERSION for more information. + */ +BROTLI_DEC_API uint32_t BrotliDecoderVersion(void); + +/** + * Callback to fire on metadata block start. + * + * After this callback is fired, if @p size is not @c 0, it is followed by + * ::brotli_decoder_metadata_chunk_func as more metadata block contents become + * accessible. + * + * @param opaque callback handle + * @param size size of metadata block + */ +typedef void (*brotli_decoder_metadata_start_func)(void* opaque, size_t size); + +/** + * Callback to fire on metadata block chunk becomes available. + * + * This function can be invoked multiple times per metadata block; block should + * be considered finished when sum of @p size matches the announced metadata + * block size. Chunks contents pointed by @p data are transient and shouln not + * be accessed after leaving the callback. + * + * @param opaque callback handle + * @param data pointer to metadata contents + * @param size size of metadata block chunk, at least @c 1 + */ +typedef void (*brotli_decoder_metadata_chunk_func)(void* opaque, + const uint8_t* data, + size_t size); + +/** + * Sets callback for receiving metadata blocks. + * + * @param state decoder instance + * @param start_func callback on metadata block start + * @param chunk_func callback on metadata block chunk + * @param opaque callback handle + */ +BROTLI_DEC_API void BrotliDecoderSetMetadataCallbacks( + BrotliDecoderState* state, + brotli_decoder_metadata_start_func start_func, + brotli_decoder_metadata_chunk_func chunk_func, void* opaque); + +#if defined(__cplusplus) || defined(c_plusplus) +} /* extern "C" */ +#endif + +#endif /* BROTLI_DEC_DECODE_H_ */ diff --git a/dependencies/linux64/include/brotli/encode.h b/dependencies/linux64/include/brotli/encode.h new file mode 100644 index 0000000..dea9931 --- /dev/null +++ b/dependencies/linux64/include/brotli/encode.h @@ -0,0 +1,501 @@ +/* Copyright 2013 Google Inc. All Rights Reserved. + + Distributed under MIT license. + See file LICENSE for detail or copy at https://opensource.org/licenses/MIT +*/ + +/** + * @file + * API for Brotli compression. + */ + +#ifndef BROTLI_ENC_ENCODE_H_ +#define BROTLI_ENC_ENCODE_H_ + +#include +#include +#include + +#if defined(__cplusplus) || defined(c_plusplus) +extern "C" { +#endif + +/** Minimal value for ::BROTLI_PARAM_LGWIN parameter. */ +#define BROTLI_MIN_WINDOW_BITS 10 +/** + * Maximal value for ::BROTLI_PARAM_LGWIN parameter. + * + * @note equal to @c BROTLI_MAX_DISTANCE_BITS constant. + */ +#define BROTLI_MAX_WINDOW_BITS 24 +/** + * Maximal value for ::BROTLI_PARAM_LGWIN parameter + * in "Large Window Brotli" (32-bit). + */ +#define BROTLI_LARGE_MAX_WINDOW_BITS 30 +/** Minimal value for ::BROTLI_PARAM_LGBLOCK parameter. */ +#define BROTLI_MIN_INPUT_BLOCK_BITS 16 +/** Maximal value for ::BROTLI_PARAM_LGBLOCK parameter. */ +#define BROTLI_MAX_INPUT_BLOCK_BITS 24 +/** Minimal value for ::BROTLI_PARAM_QUALITY parameter. */ +#define BROTLI_MIN_QUALITY 0 +/** Maximal value for ::BROTLI_PARAM_QUALITY parameter. */ +#define BROTLI_MAX_QUALITY 11 + +/** Options for ::BROTLI_PARAM_MODE parameter. */ +typedef enum BrotliEncoderMode { + /** + * Default compression mode. + * + * In this mode compressor does not know anything in advance about the + * properties of the input. + */ + BROTLI_MODE_GENERIC = 0, + /** Compression mode for UTF-8 formatted text input. */ + BROTLI_MODE_TEXT = 1, + /** Compression mode used in WOFF 2.0. */ + BROTLI_MODE_FONT = 2 +} BrotliEncoderMode; + +/** Default value for ::BROTLI_PARAM_QUALITY parameter. */ +#define BROTLI_DEFAULT_QUALITY 11 +/** Default value for ::BROTLI_PARAM_LGWIN parameter. */ +#define BROTLI_DEFAULT_WINDOW 22 +/** Default value for ::BROTLI_PARAM_MODE parameter. */ +#define BROTLI_DEFAULT_MODE BROTLI_MODE_GENERIC + +/** Operations that can be performed by streaming encoder. */ +typedef enum BrotliEncoderOperation { + /** + * Process input. + * + * Encoder may postpone producing output, until it has processed enough input. + */ + BROTLI_OPERATION_PROCESS = 0, + /** + * Produce output for all processed input. + * + * Actual flush is performed when input stream is depleted and there is enough + * space in output stream. This means that client should repeat + * ::BROTLI_OPERATION_FLUSH operation until @p available_in becomes @c 0, and + * ::BrotliEncoderHasMoreOutput returns ::BROTLI_FALSE. If output is acquired + * via ::BrotliEncoderTakeOutput, then operation should be repeated after + * output buffer is drained. + * + * @warning Until flush is complete, client @b SHOULD @b NOT swap, + * reduce or extend input stream. + * + * When flush is complete, output data will be sufficient for decoder to + * reproduce all the given input. + */ + BROTLI_OPERATION_FLUSH = 1, + /** + * Finalize the stream. + * + * Actual finalization is performed when input stream is depleted and there is + * enough space in output stream. This means that client should repeat + * ::BROTLI_OPERATION_FINISH operation until @p available_in becomes @c 0, and + * ::BrotliEncoderHasMoreOutput returns ::BROTLI_FALSE. If output is acquired + * via ::BrotliEncoderTakeOutput, then operation should be repeated after + * output buffer is drained. + * + * @warning Until finalization is complete, client @b SHOULD @b NOT swap, + * reduce or extend input stream. + * + * Helper function ::BrotliEncoderIsFinished checks if stream is finalized and + * output fully dumped. + * + * Adding more input data to finalized stream is impossible. + */ + BROTLI_OPERATION_FINISH = 2, + /** + * Emit metadata block to stream. + * + * Metadata is opaque to Brotli: neither encoder, nor decoder processes this + * data or relies on it. It may be used to pass some extra information from + * encoder client to decoder client without interfering with main data stream. + * + * @note Encoder may emit empty metadata blocks internally, to pad encoded + * stream to byte boundary. + * + * @warning Until emitting metadata is complete client @b SHOULD @b NOT swap, + * reduce or extend input stream. + * + * @warning The whole content of input buffer is considered to be the content + * of metadata block. Do @b NOT @e append metadata to input stream, + * before it is depleted with other operations. + * + * Stream is soft-flushed before metadata block is emitted. Metadata block + * @b MUST be no longer than than 16MiB. + */ + BROTLI_OPERATION_EMIT_METADATA = 3 +} BrotliEncoderOperation; + +/** Options to be used with ::BrotliEncoderSetParameter. */ +typedef enum BrotliEncoderParameter { + /** + * Tune encoder for specific input. + * + * ::BrotliEncoderMode enumerates all available values. + */ + BROTLI_PARAM_MODE = 0, + /** + * The main compression speed-density lever. + * + * The higher the quality, the slower the compression. Range is + * from ::BROTLI_MIN_QUALITY to ::BROTLI_MAX_QUALITY. + */ + BROTLI_PARAM_QUALITY = 1, + /** + * Recommended sliding LZ77 window size. + * + * Encoder may reduce this value, e.g. if input is much smaller than + * window size. + * + * Window size is `(1 << value) - 16`. + * + * Range is from ::BROTLI_MIN_WINDOW_BITS to ::BROTLI_MAX_WINDOW_BITS. + */ + BROTLI_PARAM_LGWIN = 2, + /** + * Recommended input block size. + * + * Encoder may reduce this value, e.g. if input is much smaller than input + * block size. + * + * Range is from ::BROTLI_MIN_INPUT_BLOCK_BITS to + * ::BROTLI_MAX_INPUT_BLOCK_BITS. + * + * @note Bigger input block size allows better compression, but consumes more + * memory. \n The rough formula of memory used for temporary input + * storage is `3 << lgBlock`. + */ + BROTLI_PARAM_LGBLOCK = 3, + /** + * Flag that affects usage of "literal context modeling" format feature. + * + * This flag is a "decoding-speed vs compression ratio" trade-off. + */ + BROTLI_PARAM_DISABLE_LITERAL_CONTEXT_MODELING = 4, + /** + * Estimated total input size for all ::BrotliEncoderCompressStream calls. + * + * The default value is 0, which means that the total input size is unknown. + */ + BROTLI_PARAM_SIZE_HINT = 5, + /** + * Flag that determines if "Large Window Brotli" is used. + */ + BROTLI_PARAM_LARGE_WINDOW = 6, + /** + * Recommended number of postfix bits (NPOSTFIX). + * + * Encoder may change this value. + * + * Range is from 0 to ::BROTLI_MAX_NPOSTFIX. + */ + BROTLI_PARAM_NPOSTFIX = 7, + /** + * Recommended number of direct distance codes (NDIRECT). + * + * Encoder may change this value. + * + * Range is from 0 to (15 << NPOSTFIX) in steps of (1 << NPOSTFIX). + */ + BROTLI_PARAM_NDIRECT = 8, + /** + * Number of bytes of input stream already processed by a different instance. + * + * @note It is important to configure all the encoder instances with same + * parameters (except this one) in order to allow all the encoded parts + * obey the same restrictions implied by header. + * + * If offset is not 0, then stream header is omitted. + * In any case output start is byte aligned, so for proper streams stitching + * "predecessor" stream must be flushed. + * + * Range is not artificially limited, but all the values greater or equal to + * maximal window size have the same effect. Values greater than 2**30 are not + * allowed. + */ + BROTLI_PARAM_STREAM_OFFSET = 9 +} BrotliEncoderParameter; + +/** + * Opaque structure that holds encoder state. + * + * Allocated and initialized with ::BrotliEncoderCreateInstance. + * Cleaned up and deallocated with ::BrotliEncoderDestroyInstance. + */ +typedef struct BrotliEncoderStateStruct BrotliEncoderState; + +/** + * Sets the specified parameter to the given encoder instance. + * + * @param state encoder instance + * @param param parameter to set + * @param value new parameter value + * @returns ::BROTLI_FALSE if parameter is unrecognized, or value is invalid + * @returns ::BROTLI_FALSE if value of parameter can not be changed at current + * encoder state (e.g. when encoding is started, window size might be + * already encoded and therefore it is impossible to change it) + * @returns ::BROTLI_TRUE if value is accepted + * @warning invalid values might be accepted in case they would not break + * encoding process. + */ +BROTLI_ENC_API BROTLI_BOOL BrotliEncoderSetParameter( + BrotliEncoderState* state, BrotliEncoderParameter param, uint32_t value); + +/** + * Creates an instance of ::BrotliEncoderState and initializes it. + * + * @p alloc_func and @p free_func @b MUST be both zero or both non-zero. In the + * case they are both zero, default memory allocators are used. @p opaque is + * passed to @p alloc_func and @p free_func when they are called. @p free_func + * has to return without doing anything when asked to free a NULL pointer. + * + * @param alloc_func custom memory allocation function + * @param free_func custom memory free function + * @param opaque custom memory manager handle + * @returns @c 0 if instance can not be allocated or initialized + * @returns pointer to initialized ::BrotliEncoderState otherwise + */ +BROTLI_ENC_API BrotliEncoderState* BrotliEncoderCreateInstance( + brotli_alloc_func alloc_func, brotli_free_func free_func, void* opaque); + +/** + * Deinitializes and frees ::BrotliEncoderState instance. + * + * @param state decoder instance to be cleaned up and deallocated + */ +BROTLI_ENC_API void BrotliEncoderDestroyInstance(BrotliEncoderState* state); + +/* Opaque type for pointer to different possible internal structures containing + dictionary prepared for the encoder */ +typedef struct BrotliEncoderPreparedDictionaryStruct + BrotliEncoderPreparedDictionary; + +/** + * Prepares a shared dictionary from the given file format for the encoder. + * + * @p alloc_func and @p free_func @b MUST be both zero or both non-zero. In the + * case they are both zero, default memory allocators are used. @p opaque is + * passed to @p alloc_func and @p free_func when they are called. @p free_func + * has to return without doing anything when asked to free a NULL pointer. + * + * @param type type of dictionary stored in data + * @param data_size size of @p data buffer + * @param data pointer to the dictionary data + * @param quality the maximum Brotli quality to prepare the dictionary for, + * use BROTLI_MAX_QUALITY by default + * @param alloc_func custom memory allocation function + * @param free_func custom memory free function + * @param opaque custom memory manager handle + */ +BROTLI_ENC_API BrotliEncoderPreparedDictionary* +BrotliEncoderPrepareDictionary(BrotliSharedDictionaryType type, + size_t data_size, const uint8_t data[BROTLI_ARRAY_PARAM(data_size)], + int quality, + brotli_alloc_func alloc_func, brotli_free_func free_func, void* opaque); + +BROTLI_ENC_API void BrotliEncoderDestroyPreparedDictionary( + BrotliEncoderPreparedDictionary* dictionary); + +/** + * Attaches a prepared dictionary of any type to the encoder. Can be used + * multiple times to attach multiple dictionaries. The dictionary type was + * determined by BrotliEncoderPrepareDictionary. Multiple raw prefix + * dictionaries and/or max 1 serialized dictionary with custom words can be + * attached. + * + * @returns ::BROTLI_FALSE in case of error + * @returns ::BROTLI_TRUE otherwise + */ +BROTLI_ENC_API BROTLI_BOOL BrotliEncoderAttachPreparedDictionary( + BrotliEncoderState* state, + const BrotliEncoderPreparedDictionary* dictionary); + +/** + * Calculates the output size bound for the given @p input_size. + * + * @warning Result is only valid if quality is at least @c 2 and, in + * case ::BrotliEncoderCompressStream was used, no flushes + * (::BROTLI_OPERATION_FLUSH) were performed. + * + * @param input_size size of projected input + * @returns @c 0 if result does not fit @c size_t + */ +BROTLI_ENC_API size_t BrotliEncoderMaxCompressedSize(size_t input_size); + +/** + * Performs one-shot memory-to-memory compression. + * + * Compresses the data in @p input_buffer into @p encoded_buffer, and sets + * @p *encoded_size to the compressed length. + * + * @note If ::BrotliEncoderMaxCompressedSize(@p input_size) returns non-zero + * value, then output is guaranteed to be no longer than that. + * + * @note If @p lgwin is greater than ::BROTLI_MAX_WINDOW_BITS then resulting + * stream might be incompatible with RFC 7932; to decode such streams, + * decoder should be configured with + * ::BROTLI_DECODER_PARAM_LARGE_WINDOW = @c 1 + * + * @param quality quality parameter value, e.g. ::BROTLI_DEFAULT_QUALITY + * @param lgwin lgwin parameter value, e.g. ::BROTLI_DEFAULT_WINDOW + * @param mode mode parameter value, e.g. ::BROTLI_DEFAULT_MODE + * @param input_size size of @p input_buffer + * @param input_buffer input data buffer with at least @p input_size + * addressable bytes + * @param[in, out] encoded_size @b in: size of @p encoded_buffer; \n + * @b out: length of compressed data written to + * @p encoded_buffer, or @c 0 if compression fails + * @param encoded_buffer compressed data destination buffer + * @returns ::BROTLI_FALSE in case of compression error + * @returns ::BROTLI_FALSE if output buffer is too small + * @returns ::BROTLI_TRUE otherwise + */ +BROTLI_ENC_API BROTLI_BOOL BrotliEncoderCompress( + int quality, int lgwin, BrotliEncoderMode mode, size_t input_size, + const uint8_t input_buffer[BROTLI_ARRAY_PARAM(input_size)], + size_t* encoded_size, + uint8_t encoded_buffer[BROTLI_ARRAY_PARAM(*encoded_size)]); + +/** + * Compresses input stream to output stream. + * + * The values @p *available_in and @p *available_out must specify the number of + * bytes addressable at @p *next_in and @p *next_out respectively. + * When @p *available_out is @c 0, @p next_out is allowed to be @c NULL. + * + * After each call, @p *available_in will be decremented by the amount of input + * bytes consumed, and the @p *next_in pointer will be incremented by that + * amount. Similarly, @p *available_out will be decremented by the amount of + * output bytes written, and the @p *next_out pointer will be incremented by + * that amount. + * + * @p total_out, if it is not a null-pointer, will be set to the number + * of bytes compressed since the last @p state initialization. + * + * + * + * Internally workflow consists of 3 tasks: + * -# (optionally) copy input data to internal buffer + * -# actually compress data and (optionally) store it to internal buffer + * -# (optionally) copy compressed bytes from internal buffer to output stream + * + * Whenever all 3 tasks can't move forward anymore, or error occurs, this + * method returns the control flow to caller. + * + * @p op is used to perform flush, finish the stream, or inject metadata block. + * See ::BrotliEncoderOperation for more information. + * + * Flushing the stream means forcing encoding of all input passed to encoder and + * completing the current output block, so it could be fully decoded by stream + * decoder. To perform flush set @p op to ::BROTLI_OPERATION_FLUSH. + * Under some circumstances (e.g. lack of output stream capacity) this operation + * would require several calls to ::BrotliEncoderCompressStream. The method must + * be called again until both input stream is depleted and encoder has no more + * output (see ::BrotliEncoderHasMoreOutput) after the method is called. + * + * Finishing the stream means encoding of all input passed to encoder and + * adding specific "final" marks, so stream decoder could determine that stream + * is complete. To perform finish set @p op to ::BROTLI_OPERATION_FINISH. + * Under some circumstances (e.g. lack of output stream capacity) this operation + * would require several calls to ::BrotliEncoderCompressStream. The method must + * be called again until both input stream is depleted and encoder has no more + * output (see ::BrotliEncoderHasMoreOutput) after the method is called. + * + * @warning When flushing and finishing, @p op should not change until operation + * is complete; input stream should not be swapped, reduced or + * extended as well. + * + * @param state encoder instance + * @param op requested operation + * @param[in, out] available_in @b in: amount of available input; \n + * @b out: amount of unused input + * @param[in, out] next_in pointer to the next input byte + * @param[in, out] available_out @b in: length of output buffer; \n + * @b out: remaining size of output buffer + * @param[in, out] next_out compressed output buffer cursor; + * can be @c NULL if @p available_out is @c 0 + * @param[out] total_out number of bytes produced so far; can be @c NULL + * @returns ::BROTLI_FALSE if there was an error + * @returns ::BROTLI_TRUE otherwise + */ +BROTLI_ENC_API BROTLI_BOOL BrotliEncoderCompressStream( + BrotliEncoderState* state, BrotliEncoderOperation op, size_t* available_in, + const uint8_t** next_in, size_t* available_out, uint8_t** next_out, + size_t* total_out); + +/** + * Checks if encoder instance reached the final state. + * + * @param state encoder instance + * @returns ::BROTLI_TRUE if encoder is in a state where it reached the end of + * the input and produced all of the output + * @returns ::BROTLI_FALSE otherwise + */ +BROTLI_ENC_API BROTLI_BOOL BrotliEncoderIsFinished(BrotliEncoderState* state); + +/** + * Checks if encoder has more output. + * + * @param state encoder instance + * @returns ::BROTLI_TRUE, if encoder has some unconsumed output + * @returns ::BROTLI_FALSE otherwise + */ +BROTLI_ENC_API BROTLI_BOOL BrotliEncoderHasMoreOutput( + BrotliEncoderState* state); + +/** + * Acquires pointer to internal output buffer. + * + * This method is used to make language bindings easier and more efficient: + * -# push data to ::BrotliEncoderCompressStream, + * until ::BrotliEncoderHasMoreOutput returns BROTLI_TRUE + * -# use ::BrotliEncoderTakeOutput to peek bytes and copy to language-specific + * entity + * + * Also this could be useful if there is an output stream that is able to + * consume all the provided data (e.g. when data is saved to file system). + * + * @attention After every call to ::BrotliEncoderTakeOutput @p *size bytes of + * output are considered consumed for all consecutive calls to the + * instance methods; returned pointer becomes invalidated as well. + * + * @note Encoder output is not guaranteed to be contiguous. This means that + * after the size-unrestricted call to ::BrotliEncoderTakeOutput, + * immediate next call to ::BrotliEncoderTakeOutput may return more data. + * + * @param state encoder instance + * @param[in, out] size @b in: number of bytes caller is ready to take, @c 0 if + * any amount could be handled; \n + * @b out: amount of data pointed by returned pointer and + * considered consumed; \n + * out value is never greater than in value, unless it is @c 0 + * @returns pointer to output data + */ +BROTLI_ENC_API const uint8_t* BrotliEncoderTakeOutput( + BrotliEncoderState* state, size_t* size); + +/* Returns the estimated peak memory usage (in bytes) of the BrotliCompress() + function, not counting the memory needed for the input and output. */ +BROTLI_ENC_EXTRA_API size_t BrotliEncoderEstimatePeakMemoryUsage( + int quality, int lgwin, size_t input_size); +/* Returns 0 if dictionary is not valid; otherwise returns allocation size. */ +BROTLI_ENC_EXTRA_API size_t BrotliEncoderGetPreparedDictionarySize( + const BrotliEncoderPreparedDictionary* dictionary); + +/** + * Gets an encoder library version. + * + * Look at BROTLI_MAKE_HEX_VERSION for more information. + */ +BROTLI_ENC_API uint32_t BrotliEncoderVersion(void); + +#if defined(__cplusplus) || defined(c_plusplus) +} /* extern "C" */ +#endif + +#endif /* BROTLI_ENC_ENCODE_H_ */ diff --git a/dependencies/linux64/include/brotli/port.h b/dependencies/linux64/include/brotli/port.h new file mode 100644 index 0000000..0d50019 --- /dev/null +++ b/dependencies/linux64/include/brotli/port.h @@ -0,0 +1,305 @@ +/* Copyright 2016 Google Inc. All Rights Reserved. + + Distributed under MIT license. + See file LICENSE for detail or copy at https://opensource.org/licenses/MIT +*/ + +/* Macros for compiler / platform specific API declarations. */ + +#ifndef BROTLI_COMMON_PORT_H_ +#define BROTLI_COMMON_PORT_H_ + +/* The following macros were borrowed from https://github.com/nemequ/hedley + * with permission of original author - Evan Nemerson */ + +/* >>> >>> >>> hedley macros */ + +#define BROTLI_MAKE_VERSION(major, minor, revision) \ + (((major) * 1000000) + ((minor) * 1000) + (revision)) + +#if defined(__GNUC__) && defined(__GNUC_PATCHLEVEL__) +#define BROTLI_GNUC_VERSION \ + BROTLI_MAKE_VERSION(__GNUC__, __GNUC_MINOR__, __GNUC_PATCHLEVEL__) +#elif defined(__GNUC__) +#define BROTLI_GNUC_VERSION BROTLI_MAKE_VERSION(__GNUC__, __GNUC_MINOR__, 0) +#endif + +#if defined(BROTLI_GNUC_VERSION) +#define BROTLI_GNUC_VERSION_CHECK(major, minor, patch) \ + (BROTLI_GNUC_VERSION >= BROTLI_MAKE_VERSION(major, minor, patch)) +#else +#define BROTLI_GNUC_VERSION_CHECK(major, minor, patch) (0) +#endif + +#if defined(_MSC_FULL_VER) && (_MSC_FULL_VER >= 140000000) +#define BROTLI_MSVC_VERSION \ + BROTLI_MAKE_VERSION((_MSC_FULL_VER / 10000000), \ + (_MSC_FULL_VER % 10000000) / 100000, \ + (_MSC_FULL_VER % 100000) / 100) +#elif defined(_MSC_FULL_VER) +#define BROTLI_MSVC_VERSION \ + BROTLI_MAKE_VERSION((_MSC_FULL_VER / 1000000), \ + (_MSC_FULL_VER % 1000000) / 10000, \ + (_MSC_FULL_VER % 10000) / 10) +#elif defined(_MSC_VER) +#define BROTLI_MSVC_VERSION \ + BROTLI_MAKE_VERSION(_MSC_VER / 100, _MSC_VER % 100, 0) +#endif + +#if !defined(_MSC_VER) +#define BROTLI_MSVC_VERSION_CHECK(major, minor, patch) (0) +#elif defined(_MSC_VER) && (_MSC_VER >= 1400) +#define BROTLI_MSVC_VERSION_CHECK(major, minor, patch) \ + (_MSC_FULL_VER >= ((major * 10000000) + (minor * 100000) + (patch))) +#elif defined(_MSC_VER) && (_MSC_VER >= 1200) +#define BROTLI_MSVC_VERSION_CHECK(major, minor, patch) \ + (_MSC_FULL_VER >= ((major * 1000000) + (minor * 10000) + (patch))) +#else +#define BROTLI_MSVC_VERSION_CHECK(major, minor, patch) \ + (_MSC_VER >= ((major * 100) + (minor))) +#endif + +#if defined(__INTEL_COMPILER) && defined(__INTEL_COMPILER_UPDATE) +#define BROTLI_INTEL_VERSION \ + BROTLI_MAKE_VERSION(__INTEL_COMPILER / 100, \ + __INTEL_COMPILER % 100, \ + __INTEL_COMPILER_UPDATE) +#elif defined(__INTEL_COMPILER) +#define BROTLI_INTEL_VERSION \ + BROTLI_MAKE_VERSION(__INTEL_COMPILER / 100, __INTEL_COMPILER % 100, 0) +#endif + +#if defined(BROTLI_INTEL_VERSION) +#define BROTLI_INTEL_VERSION_CHECK(major, minor, patch) \ + (BROTLI_INTEL_VERSION >= BROTLI_MAKE_VERSION(major, minor, patch)) +#else +#define BROTLI_INTEL_VERSION_CHECK(major, minor, patch) (0) +#endif + +#if defined(__PGI) && \ + defined(__PGIC__) && defined(__PGIC_MINOR__) && defined(__PGIC_PATCHLEVEL__) +#define BROTLI_PGI_VERSION \ + BROTLI_MAKE_VERSION(__PGIC__, __PGIC_MINOR__, __PGIC_PATCHLEVEL__) +#endif + +#if defined(BROTLI_PGI_VERSION) +#define BROTLI_PGI_VERSION_CHECK(major, minor, patch) \ + (BROTLI_PGI_VERSION >= BROTLI_MAKE_VERSION(major, minor, patch)) +#else +#define BROTLI_PGI_VERSION_CHECK(major, minor, patch) (0) +#endif + +#if defined(__SUNPRO_C) && (__SUNPRO_C > 0x1000) +#define BROTLI_SUNPRO_VERSION \ + BROTLI_MAKE_VERSION( \ + (((__SUNPRO_C >> 16) & 0xf) * 10) + ((__SUNPRO_C >> 12) & 0xf), \ + (((__SUNPRO_C >> 8) & 0xf) * 10) + ((__SUNPRO_C >> 4) & 0xf), \ + (__SUNPRO_C & 0xf) * 10) +#elif defined(__SUNPRO_C) +#define BROTLI_SUNPRO_VERSION \ + BROTLI_MAKE_VERSION((__SUNPRO_C >> 8) & 0xf, \ + (__SUNPRO_C >> 4) & 0xf, \ + (__SUNPRO_C) & 0xf) +#elif defined(__SUNPRO_CC) && (__SUNPRO_CC > 0x1000) +#define BROTLI_SUNPRO_VERSION \ + BROTLI_MAKE_VERSION( \ + (((__SUNPRO_CC >> 16) & 0xf) * 10) + ((__SUNPRO_CC >> 12) & 0xf), \ + (((__SUNPRO_CC >> 8) & 0xf) * 10) + ((__SUNPRO_CC >> 4) & 0xf), \ + (__SUNPRO_CC & 0xf) * 10) +#elif defined(__SUNPRO_CC) +#define BROTLI_SUNPRO_VERSION \ + BROTLI_MAKE_VERSION((__SUNPRO_CC >> 8) & 0xf, \ + (__SUNPRO_CC >> 4) & 0xf, \ + (__SUNPRO_CC) & 0xf) +#endif + +#if defined(BROTLI_SUNPRO_VERSION) +#define BROTLI_SUNPRO_VERSION_CHECK(major, minor, patch) \ + (BROTLI_SUNPRO_VERSION >= BROTLI_MAKE_VERSION(major, minor, patch)) +#else +#define BROTLI_SUNPRO_VERSION_CHECK(major, minor, patch) (0) +#endif + +#if defined(__CC_ARM) && defined(__ARMCOMPILER_VERSION) +#define BROTLI_ARM_VERSION \ + BROTLI_MAKE_VERSION((__ARMCOMPILER_VERSION / 1000000), \ + (__ARMCOMPILER_VERSION % 1000000) / 10000, \ + (__ARMCOMPILER_VERSION % 10000) / 100) +#elif defined(__CC_ARM) && defined(__ARMCC_VERSION) +#define BROTLI_ARM_VERSION \ + BROTLI_MAKE_VERSION((__ARMCC_VERSION / 1000000), \ + (__ARMCC_VERSION % 1000000) / 10000, \ + (__ARMCC_VERSION % 10000) / 100) +#endif + +#if defined(BROTLI_ARM_VERSION) +#define BROTLI_ARM_VERSION_CHECK(major, minor, patch) \ + (BROTLI_ARM_VERSION >= BROTLI_MAKE_VERSION(major, minor, patch)) +#else +#define BROTLI_ARM_VERSION_CHECK(major, minor, patch) (0) +#endif + +#if defined(__ibmxl__) +#define BROTLI_IBM_VERSION \ + BROTLI_MAKE_VERSION(__ibmxl_version__, \ + __ibmxl_release__, \ + __ibmxl_modification__) +#elif defined(__xlC__) && defined(__xlC_ver__) +#define BROTLI_IBM_VERSION \ + BROTLI_MAKE_VERSION(__xlC__ >> 8, __xlC__ & 0xff, (__xlC_ver__ >> 8) & 0xff) +#elif defined(__xlC__) +#define BROTLI_IBM_VERSION BROTLI_MAKE_VERSION(__xlC__ >> 8, __xlC__ & 0xff, 0) +#endif + +#if defined(BROTLI_IBM_VERSION) +#define BROTLI_IBM_VERSION_CHECK(major, minor, patch) \ + (BROTLI_IBM_VERSION >= BROTLI_MAKE_VERSION(major, minor, patch)) +#else +#define BROTLI_IBM_VERSION_CHECK(major, minor, patch) (0) +#endif + +#if defined(__TI_COMPILER_VERSION__) +#define BROTLI_TI_VERSION \ + BROTLI_MAKE_VERSION((__TI_COMPILER_VERSION__ / 1000000), \ + (__TI_COMPILER_VERSION__ % 1000000) / 1000, \ + (__TI_COMPILER_VERSION__ % 1000)) +#endif + +#if defined(BROTLI_TI_VERSION) +#define BROTLI_TI_VERSION_CHECK(major, minor, patch) \ + (BROTLI_TI_VERSION >= BROTLI_MAKE_VERSION(major, minor, patch)) +#else +#define BROTLI_TI_VERSION_CHECK(major, minor, patch) (0) +#endif + +#if defined(__IAR_SYSTEMS_ICC__) +#if __VER__ > 1000 +#define BROTLI_IAR_VERSION \ + BROTLI_MAKE_VERSION((__VER__ / 1000000), \ + (__VER__ / 1000) % 1000, \ + (__VER__ % 1000)) +#else +#define BROTLI_IAR_VERSION BROTLI_MAKE_VERSION(VER / 100, __VER__ % 100, 0) +#endif +#endif + +#if defined(BROTLI_IAR_VERSION) +#define BROTLI_IAR_VERSION_CHECK(major, minor, patch) \ + (BROTLI_IAR_VERSION >= BROTLI_MAKE_VERSION(major, minor, patch)) +#else +#define BROTLI_IAR_VERSION_CHECK(major, minor, patch) (0) +#endif + +#if defined(__TINYC__) +#define BROTLI_TINYC_VERSION \ + BROTLI_MAKE_VERSION(__TINYC__ / 1000, (__TINYC__ / 100) % 10, __TINYC__ % 100) +#endif + +#if defined(BROTLI_TINYC_VERSION) +#define BROTLI_TINYC_VERSION_CHECK(major, minor, patch) \ + (BROTLI_TINYC_VERSION >= BROTLI_MAKE_VERSION(major, minor, patch)) +#else +#define BROTLI_TINYC_VERSION_CHECK(major, minor, patch) (0) +#endif + +#if defined(__has_attribute) +#define BROTLI_GNUC_HAS_ATTRIBUTE(attribute, major, minor, patch) \ + __has_attribute(attribute) +#else +#define BROTLI_GNUC_HAS_ATTRIBUTE(attribute, major, minor, patch) \ + BROTLI_GNUC_VERSION_CHECK(major, minor, patch) +#endif + +#if defined(__has_builtin) +#define BROTLI_GNUC_HAS_BUILTIN(builtin, major, minor, patch) \ + __has_builtin(builtin) +#else +#define BROTLI_GNUC_HAS_BUILTIN(builtin, major, minor, patch) \ + BROTLI_GNUC_VERSION_CHECK(major, minor, patch) +#endif + +#if defined(__has_feature) +#define BROTLI_HAS_FEATURE(feature) __has_feature(feature) +#else +#define BROTLI_HAS_FEATURE(feature) (0) +#endif + +#if defined(_WIN32) || defined(__CYGWIN__) +#define BROTLI_PUBLIC +#elif BROTLI_GNUC_VERSION_CHECK(3, 3, 0) || \ + BROTLI_TI_VERSION_CHECK(8, 0, 0) || \ + BROTLI_INTEL_VERSION_CHECK(16, 0, 0) || \ + BROTLI_ARM_VERSION_CHECK(4, 1, 0) || \ + BROTLI_IBM_VERSION_CHECK(13, 1, 0) || \ + BROTLI_SUNPRO_VERSION_CHECK(5, 11, 0) || \ + (BROTLI_TI_VERSION_CHECK(7, 3, 0) && \ + defined(__TI_GNU_ATTRIBUTE_SUPPORT__) && defined(__TI_EABI__)) +#define BROTLI_PUBLIC __attribute__ ((visibility ("default"))) +#else +#define BROTLI_PUBLIC +#endif + +/* BROTLI_INTERNAL could be defined to override visibility, e.g. for tests. */ +#if !defined(BROTLI_INTERNAL) +#if defined(_WIN32) || defined(__CYGWIN__) +#define BROTLI_INTERNAL +#elif BROTLI_GNUC_VERSION_CHECK(3, 3, 0) || \ + BROTLI_TI_VERSION_CHECK(8, 0, 0) || \ + BROTLI_INTEL_VERSION_CHECK(16, 0, 0) || \ + BROTLI_ARM_VERSION_CHECK(4, 1, 0) || \ + BROTLI_IBM_VERSION_CHECK(13, 1, 0) || \ + BROTLI_SUNPRO_VERSION_CHECK(5, 11, 0) || \ + (BROTLI_TI_VERSION_CHECK(7, 3, 0) && \ + defined(__TI_GNU_ATTRIBUTE_SUPPORT__) && defined(__TI_EABI__)) +#define BROTLI_INTERNAL __attribute__ ((visibility ("hidden"))) +#else +#define BROTLI_INTERNAL +#endif +#endif + +#if defined(__STDC_VERSION__) && (__STDC_VERSION__ >= 199901L) && \ + !defined(__STDC_NO_VLA__) && !defined(__cplusplus) && \ + !defined(__PGI) && !defined(__PGIC__) && !defined(__TINYC__) && \ + !defined(__clang__) +#define BROTLI_ARRAY_PARAM(name) (name) +#else +#define BROTLI_ARRAY_PARAM(name) +#endif + +/* <<< <<< <<< end of hedley macros. */ + +#if defined(BROTLI_SHARED_COMPILATION) +#if defined(_WIN32) +#if defined(BROTLICOMMON_SHARED_COMPILATION) +#define BROTLI_COMMON_API __declspec(dllexport) +#else +#define BROTLI_COMMON_API __declspec(dllimport) +#endif /* BROTLICOMMON_SHARED_COMPILATION */ +#if defined(BROTLIDEC_SHARED_COMPILATION) +#define BROTLI_DEC_API __declspec(dllexport) +#else +#define BROTLI_DEC_API __declspec(dllimport) +#endif /* BROTLIDEC_SHARED_COMPILATION */ +#if defined(BROTLIENC_SHARED_COMPILATION) +#define BROTLI_ENC_API __declspec(dllexport) +#else +#define BROTLI_ENC_API __declspec(dllimport) +#endif /* BROTLIENC_SHARED_COMPILATION */ +#else /* _WIN32 */ +#define BROTLI_COMMON_API BROTLI_PUBLIC +#define BROTLI_DEC_API BROTLI_PUBLIC +#define BROTLI_ENC_API BROTLI_PUBLIC +#endif /* _WIN32 */ +#else /* BROTLI_SHARED_COMPILATION */ +#define BROTLI_COMMON_API +#define BROTLI_DEC_API +#define BROTLI_ENC_API +#endif + +#if defined(BROTLI_BUILD_ENC_EXTRA_API) +#define BROTLI_ENC_EXTRA_API BROTLI_ENC_API +#else +#define BROTLI_ENC_EXTRA_API BROTLI_INTERNAL +#endif + +#endif /* BROTLI_COMMON_PORT_H_ */ diff --git a/dependencies/linux64/include/brotli/shared_dictionary.h b/dependencies/linux64/include/brotli/shared_dictionary.h new file mode 100644 index 0000000..2970c2d --- /dev/null +++ b/dependencies/linux64/include/brotli/shared_dictionary.h @@ -0,0 +1,100 @@ +/* Copyright 2017 Google Inc. All Rights Reserved. + + Distributed under MIT license. + See file LICENSE for detail or copy at https://opensource.org/licenses/MIT +*/ + +/* (Opaque) Shared Dictionary definition and utilities. */ + +#ifndef BROTLI_COMMON_SHARED_DICTIONARY_H_ +#define BROTLI_COMMON_SHARED_DICTIONARY_H_ + +#include +#include + +#if defined(__cplusplus) || defined(c_plusplus) +extern "C" { +#endif + +#define SHARED_BROTLI_MIN_DICTIONARY_WORD_LENGTH 4 +#define SHARED_BROTLI_MAX_DICTIONARY_WORD_LENGTH 31 +#define SHARED_BROTLI_NUM_DICTIONARY_CONTEXTS 64 +#define SHARED_BROTLI_MAX_COMPOUND_DICTS 15 + +/** + * Opaque structure that holds shared dictionary data. + * + * Allocated and initialized with ::BrotliSharedDictionaryCreateInstance. + * Cleaned up and deallocated with ::BrotliSharedDictionaryDestroyInstance. + */ +typedef struct BrotliSharedDictionaryStruct BrotliSharedDictionary; + +/** + * Input data type for ::BrotliSharedDictionaryAttach. + */ +typedef enum BrotliSharedDictionaryType { + /** Raw LZ77 prefix dictionary. */ + BROTLI_SHARED_DICTIONARY_RAW = 0, + /** Serialized shared dictionary. + * + * DO NOT USE: methods accepting this value will fail. + */ + BROTLI_SHARED_DICTIONARY_SERIALIZED = 1 +} BrotliSharedDictionaryType; + +/** + * Creates an instance of ::BrotliSharedDictionary. + * + * Fresh instance has default word dictionary and transforms + * and no LZ77 prefix dictionary. + * + * @p alloc_func and @p free_func @b MUST be both zero or both non-zero. In the + * case they are both zero, default memory allocators are used. @p opaque is + * passed to @p alloc_func and @p free_func when they are called. @p free_func + * has to return without doing anything when asked to free a NULL pointer. + * + * @param alloc_func custom memory allocation function + * @param free_func custom memory free function + * @param opaque custom memory manager handle + * @returns @c 0 if instance can not be allocated or initialized + * @returns pointer to initialized ::BrotliSharedDictionary otherwise + */ +BROTLI_COMMON_API BrotliSharedDictionary* BrotliSharedDictionaryCreateInstance( + brotli_alloc_func alloc_func, brotli_free_func free_func, void* opaque); + +/** + * Deinitializes and frees ::BrotliSharedDictionary instance. + * + * @param dict shared dictionary instance to be cleaned up and deallocated + */ +BROTLI_COMMON_API void BrotliSharedDictionaryDestroyInstance( + BrotliSharedDictionary* dict); + +/** + * Attaches dictionary to a given instance of ::BrotliSharedDictionary. + * + * Dictionary to be attached is represented in a serialized format as a region + * of memory. + * + * Provided data it partially referenced by a resulting (compound) dictionary, + * and should be kept untouched, while at least one compound dictionary uses it. + * This way memory overhead is kept minimal by the cost of additional resource + * management. + * + * @param dict dictionary to extend + * @param type type of dictionary to attach + * @param data_size size of @p data + * @param data serialized dictionary of type @p type, with at least @p data_size + * addressable bytes + * @returns ::BROTLI_TRUE if provided dictionary is successfully attached + * @returns ::BROTLI_FALSE otherwise + */ +BROTLI_COMMON_API BROTLI_BOOL BrotliSharedDictionaryAttach( + BrotliSharedDictionary* dict, BrotliSharedDictionaryType type, + size_t data_size, const uint8_t data[BROTLI_ARRAY_PARAM(data_size)]); + +#if defined(__cplusplus) || defined(c_plusplus) +} /* extern "C" */ +#endif + +#endif /* BROTLI_COMMON_SHARED_DICTIONARY_H_ */ diff --git a/dependencies/linux64/include/brotli/types.h b/dependencies/linux64/include/brotli/types.h new file mode 100644 index 0000000..eff1a3c --- /dev/null +++ b/dependencies/linux64/include/brotli/types.h @@ -0,0 +1,83 @@ +/* Copyright 2013 Google Inc. All Rights Reserved. + + Distributed under MIT license. + See file LICENSE for detail or copy at https://opensource.org/licenses/MIT +*/ + +/** + * @file + * Common types used in decoder and encoder API. + */ + +#ifndef BROTLI_COMMON_TYPES_H_ +#define BROTLI_COMMON_TYPES_H_ + +#include /* for size_t */ + +#if defined(_MSC_VER) && (_MSC_VER < 1600) +typedef __int8 int8_t; +typedef unsigned __int8 uint8_t; +typedef __int16 int16_t; +typedef unsigned __int16 uint16_t; +typedef __int32 int32_t; +typedef unsigned __int32 uint32_t; +typedef unsigned __int64 uint64_t; +typedef __int64 int64_t; +#else +#include +#endif /* defined(_MSC_VER) && (_MSC_VER < 1600) */ + +/** + * A portable @c bool replacement. + * + * ::BROTLI_BOOL is a "documentation" type: actually it is @c int, but in API it + * denotes a type, whose only values are ::BROTLI_TRUE and ::BROTLI_FALSE. + * + * ::BROTLI_BOOL values passed to Brotli should either be ::BROTLI_TRUE or + * ::BROTLI_FALSE, or be a result of ::TO_BROTLI_BOOL macros. + * + * ::BROTLI_BOOL values returned by Brotli should not be tested for equality + * with @c true, @c false, ::BROTLI_TRUE, ::BROTLI_FALSE, but rather should be + * evaluated, for example: @code{.cpp} + * if (SomeBrotliFunction(encoder, BROTLI_TRUE) && + * !OtherBrotliFunction(decoder, BROTLI_FALSE)) { + * bool x = !!YetAnotherBrotliFunction(encoder, TO_BROLTI_BOOL(2 * 2 == 4)); + * DoSomething(x); + * } + * @endcode + */ +#define BROTLI_BOOL int +/** Portable @c true replacement. */ +#define BROTLI_TRUE 1 +/** Portable @c false replacement. */ +#define BROTLI_FALSE 0 +/** @c bool to ::BROTLI_BOOL conversion macros. */ +#define TO_BROTLI_BOOL(X) (!!(X) ? BROTLI_TRUE : BROTLI_FALSE) + +#define BROTLI_MAKE_UINT64_T(high, low) ((((uint64_t)(high)) << 32) | low) + +#define BROTLI_UINT32_MAX (~((uint32_t)0)) +#define BROTLI_SIZE_MAX (~((size_t)0)) + +/** + * Allocating function pointer type. + * + * @param opaque custom memory manager handle provided by client + * @param size requested memory region size; can not be @c 0 + * @returns @c 0 in the case of failure + * @returns a valid pointer to a memory region of at least @p size bytes + * long otherwise + */ +typedef void* (*brotli_alloc_func)(void* opaque, size_t size); + +/** + * Deallocating function pointer type. + * + * This function @b SHOULD do nothing if @p address is @c 0. + * + * @param opaque custom memory manager handle provided by client + * @param address memory region pointer returned by ::brotli_alloc_func, or @c 0 + */ +typedef void (*brotli_free_func)(void* opaque, void* address); + +#endif /* BROTLI_COMMON_TYPES_H_ */ diff --git a/dependencies/linux64/include/bzlib.h b/dependencies/linux64/include/bzlib.h new file mode 100644 index 0000000..8966a6c --- /dev/null +++ b/dependencies/linux64/include/bzlib.h @@ -0,0 +1,282 @@ + +/*-------------------------------------------------------------*/ +/*--- Public header file for the library. ---*/ +/*--- bzlib.h ---*/ +/*-------------------------------------------------------------*/ + +/* ------------------------------------------------------------------ + This file is part of bzip2/libbzip2, a program and library for + lossless, block-sorting data compression. + + bzip2/libbzip2 version 1.0.8 of 13 July 2019 + Copyright (C) 1996-2019 Julian Seward + + Please read the WARNING, DISCLAIMER and PATENTS sections in the + README file. + + This program is released under the terms of the license contained + in the file LICENSE. + ------------------------------------------------------------------ */ + + +#ifndef _BZLIB_H +#define _BZLIB_H + +#ifdef __cplusplus +extern "C" { +#endif + +#define BZ_RUN 0 +#define BZ_FLUSH 1 +#define BZ_FINISH 2 + +#define BZ_OK 0 +#define BZ_RUN_OK 1 +#define BZ_FLUSH_OK 2 +#define BZ_FINISH_OK 3 +#define BZ_STREAM_END 4 +#define BZ_SEQUENCE_ERROR (-1) +#define BZ_PARAM_ERROR (-2) +#define BZ_MEM_ERROR (-3) +#define BZ_DATA_ERROR (-4) +#define BZ_DATA_ERROR_MAGIC (-5) +#define BZ_IO_ERROR (-6) +#define BZ_UNEXPECTED_EOF (-7) +#define BZ_OUTBUFF_FULL (-8) +#define BZ_CONFIG_ERROR (-9) + +typedef + struct { + char *next_in; + unsigned int avail_in; + unsigned int total_in_lo32; + unsigned int total_in_hi32; + + char *next_out; + unsigned int avail_out; + unsigned int total_out_lo32; + unsigned int total_out_hi32; + + void *state; + + void *(*bzalloc)(void *,int,int); + void (*bzfree)(void *,void *); + void *opaque; + } + bz_stream; + + +#ifndef BZ_IMPORT +#define BZ_EXPORT +#endif + +#ifndef BZ_NO_STDIO +/* Need a definitition for FILE */ +#include +#endif + +#ifdef _WIN32 +# include +# ifdef small + /* windows.h define small to char */ +# undef small +# endif +# ifdef BZ_EXPORT +# define BZ_API(func) WINAPI func +# define BZ_EXTERN extern +# else + /* import windows dll dynamically */ +# define BZ_API(func) (WINAPI * func) +# define BZ_EXTERN +# endif +#else +# define BZ_API(func) func +# define BZ_EXTERN extern +#endif + + +/*-- Core (low-level) library functions --*/ + +BZ_EXTERN int BZ_API(BZ2_bzCompressInit) ( + bz_stream* strm, + int blockSize100k, + int verbosity, + int workFactor + ); + +BZ_EXTERN int BZ_API(BZ2_bzCompress) ( + bz_stream* strm, + int action + ); + +BZ_EXTERN int BZ_API(BZ2_bzCompressEnd) ( + bz_stream* strm + ); + +BZ_EXTERN int BZ_API(BZ2_bzDecompressInit) ( + bz_stream *strm, + int verbosity, + int small + ); + +BZ_EXTERN int BZ_API(BZ2_bzDecompress) ( + bz_stream* strm + ); + +BZ_EXTERN int BZ_API(BZ2_bzDecompressEnd) ( + bz_stream *strm + ); + + + +/*-- High(er) level library functions --*/ + +#ifndef BZ_NO_STDIO +#define BZ_MAX_UNUSED 5000 + +typedef void BZFILE; + +BZ_EXTERN BZFILE* BZ_API(BZ2_bzReadOpen) ( + int* bzerror, + FILE* f, + int verbosity, + int small, + void* unused, + int nUnused + ); + +BZ_EXTERN void BZ_API(BZ2_bzReadClose) ( + int* bzerror, + BZFILE* b + ); + +BZ_EXTERN void BZ_API(BZ2_bzReadGetUnused) ( + int* bzerror, + BZFILE* b, + void** unused, + int* nUnused + ); + +BZ_EXTERN int BZ_API(BZ2_bzRead) ( + int* bzerror, + BZFILE* b, + void* buf, + int len + ); + +BZ_EXTERN BZFILE* BZ_API(BZ2_bzWriteOpen) ( + int* bzerror, + FILE* f, + int blockSize100k, + int verbosity, + int workFactor + ); + +BZ_EXTERN void BZ_API(BZ2_bzWrite) ( + int* bzerror, + BZFILE* b, + void* buf, + int len + ); + +BZ_EXTERN void BZ_API(BZ2_bzWriteClose) ( + int* bzerror, + BZFILE* b, + int abandon, + unsigned int* nbytes_in, + unsigned int* nbytes_out + ); + +BZ_EXTERN void BZ_API(BZ2_bzWriteClose64) ( + int* bzerror, + BZFILE* b, + int abandon, + unsigned int* nbytes_in_lo32, + unsigned int* nbytes_in_hi32, + unsigned int* nbytes_out_lo32, + unsigned int* nbytes_out_hi32 + ); +#endif + + +/*-- Utility functions --*/ + +BZ_EXTERN int BZ_API(BZ2_bzBuffToBuffCompress) ( + char* dest, + unsigned int* destLen, + char* source, + unsigned int sourceLen, + int blockSize100k, + int verbosity, + int workFactor + ); + +BZ_EXTERN int BZ_API(BZ2_bzBuffToBuffDecompress) ( + char* dest, + unsigned int* destLen, + char* source, + unsigned int sourceLen, + int small, + int verbosity + ); + + +/*-- + Code contributed by Yoshioka Tsuneo (tsuneo@rr.iij4u.or.jp) + to support better zlib compatibility. + This code is not _officially_ part of libbzip2 (yet); + I haven't tested it, documented it, or considered the + threading-safeness of it. + If this code breaks, please contact both Yoshioka and me. +--*/ + +BZ_EXTERN const char * BZ_API(BZ2_bzlibVersion) ( + void + ); + +#ifndef BZ_NO_STDIO +BZ_EXTERN BZFILE * BZ_API(BZ2_bzopen) ( + const char *path, + const char *mode + ); + +BZ_EXTERN BZFILE * BZ_API(BZ2_bzdopen) ( + int fd, + const char *mode + ); + +BZ_EXTERN int BZ_API(BZ2_bzread) ( + BZFILE* b, + void* buf, + int len + ); + +BZ_EXTERN int BZ_API(BZ2_bzwrite) ( + BZFILE* b, + void* buf, + int len + ); + +BZ_EXTERN int BZ_API(BZ2_bzflush) ( + BZFILE* b + ); + +BZ_EXTERN void BZ_API(BZ2_bzclose) ( + BZFILE* b + ); + +BZ_EXTERN const char * BZ_API(BZ2_bzerror) ( + BZFILE *b, + int *errnum + ); +#endif + +#ifdef __cplusplus +} +#endif + +#endif + +/*-------------------------------------------------------------*/ +/*--- end bzlib.h ---*/ +/*-------------------------------------------------------------*/ diff --git a/dependencies/linux64/include/freetype2/freetype/config/ftconfig.h b/dependencies/linux64/include/freetype2/freetype/config/ftconfig.h new file mode 100644 index 0000000..ef58b2f --- /dev/null +++ b/dependencies/linux64/include/freetype2/freetype/config/ftconfig.h @@ -0,0 +1,52 @@ +/**************************************************************************** + * + * ftconfig.h.in + * + * UNIX-specific configuration file (specification only). + * + * Copyright (C) 1996-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + + /************************************************************************** + * + * This header file contains a number of macro definitions that are used by + * the rest of the engine. Most of the macros here are automatically + * determined at compile time, and you should not need to change it to port + * FreeType, except to compile the library with a non-ANSI compiler. + * + * Note however that if some specific modifications are needed, we advise + * you to place a modified copy in your build directory. + * + * The build directory is usually `builds/`, and contains + * system-specific files that are always included first when building the + * library. + * + */ + +#ifndef FTCONFIG_H_ +#define FTCONFIG_H_ + +#include +#include FT_CONFIG_OPTIONS_H +#include FT_CONFIG_STANDARD_LIBRARY_H + +#define HAVE_UNISTD_H 1 +#define HAVE_FCNTL_H 1 + +#include +#include +#include + +#endif /* FTCONFIG_H_ */ + + +/* END */ diff --git a/dependencies/linux64/include/freetype2/freetype/config/ftheader.h b/dependencies/linux64/include/freetype2/freetype/config/ftheader.h new file mode 100644 index 0000000..f6ef261 --- /dev/null +++ b/dependencies/linux64/include/freetype2/freetype/config/ftheader.h @@ -0,0 +1,836 @@ +/**************************************************************************** + * + * ftheader.h + * + * Build macros of the FreeType 2 library. + * + * Copyright (C) 1996-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + +#ifndef FTHEADER_H_ +#define FTHEADER_H_ + + + /*@***********************************************************************/ + /* */ + /* */ + /* FT_BEGIN_HEADER */ + /* */ + /* */ + /* This macro is used in association with @FT_END_HEADER in header */ + /* files to ensure that the declarations within are properly */ + /* encapsulated in an `extern "C" { .. }` block when included from a */ + /* C++ compiler. */ + /* */ +#ifndef FT_BEGIN_HEADER +# ifdef __cplusplus +# define FT_BEGIN_HEADER extern "C" { +# else +# define FT_BEGIN_HEADER /* nothing */ +# endif +#endif + + + /*@***********************************************************************/ + /* */ + /* */ + /* FT_END_HEADER */ + /* */ + /* */ + /* This macro is used in association with @FT_BEGIN_HEADER in header */ + /* files to ensure that the declarations within are properly */ + /* encapsulated in an `extern "C" { .. }` block when included from a */ + /* C++ compiler. */ + /* */ +#ifndef FT_END_HEADER +# ifdef __cplusplus +# define FT_END_HEADER } +# else +# define FT_END_HEADER /* nothing */ +# endif +#endif + + + /************************************************************************** + * + * Aliases for the FreeType 2 public and configuration files. + * + */ + + /************************************************************************** + * + * @section: + * header_file_macros + * + * @title: + * Header File Macros + * + * @abstract: + * Macro definitions used to `#include` specific header files. + * + * @description: + * In addition to the normal scheme of including header files like + * + * ``` + * #include + * #include + * #include + * ``` + * + * it is possible to used named macros instead. They can be used + * directly in `#include` statements as in + * + * ``` + * #include FT_FREETYPE_H + * #include FT_MULTIPLE_MASTERS_H + * #include FT_GLYPH_H + * ``` + * + * These macros were introduced to overcome the infamous 8.3~naming rule + * required by DOS (and `FT_MULTIPLE_MASTERS_H` is a lot more meaningful + * than `ftmm.h`). + * + */ + + + /* configuration files */ + + /************************************************************************** + * + * @macro: + * FT_CONFIG_CONFIG_H + * + * @description: + * A macro used in `#include` statements to name the file containing + * FreeType~2 configuration data. + * + */ +#ifndef FT_CONFIG_CONFIG_H +#define FT_CONFIG_CONFIG_H +#endif + + + /************************************************************************** + * + * @macro: + * FT_CONFIG_STANDARD_LIBRARY_H + * + * @description: + * A macro used in `#include` statements to name the file containing + * FreeType~2 interface to the standard C library functions. + * + */ +#ifndef FT_CONFIG_STANDARD_LIBRARY_H +#define FT_CONFIG_STANDARD_LIBRARY_H +#endif + + + /************************************************************************** + * + * @macro: + * FT_CONFIG_OPTIONS_H + * + * @description: + * A macro used in `#include` statements to name the file containing + * FreeType~2 project-specific configuration options. + * + */ +#ifndef FT_CONFIG_OPTIONS_H +#define FT_CONFIG_OPTIONS_H +#endif + + + /************************************************************************** + * + * @macro: + * FT_CONFIG_MODULES_H + * + * @description: + * A macro used in `#include` statements to name the file containing the + * list of FreeType~2 modules that are statically linked to new library + * instances in @FT_Init_FreeType. + * + */ +#ifndef FT_CONFIG_MODULES_H +#define FT_CONFIG_MODULES_H +#endif + + /* */ + + /* public headers */ + + /************************************************************************** + * + * @macro: + * FT_FREETYPE_H + * + * @description: + * A macro used in `#include` statements to name the file containing the + * base FreeType~2 API. + * + */ +#define FT_FREETYPE_H + + + /************************************************************************** + * + * @macro: + * FT_ERRORS_H + * + * @description: + * A macro used in `#include` statements to name the file containing the + * list of FreeType~2 error codes (and messages). + * + * It is included by @FT_FREETYPE_H. + * + */ +#define FT_ERRORS_H + + + /************************************************************************** + * + * @macro: + * FT_MODULE_ERRORS_H + * + * @description: + * A macro used in `#include` statements to name the file containing the + * list of FreeType~2 module error offsets (and messages). + * + */ +#define FT_MODULE_ERRORS_H + + + /************************************************************************** + * + * @macro: + * FT_SYSTEM_H + * + * @description: + * A macro used in `#include` statements to name the file containing the + * FreeType~2 interface to low-level operations (i.e., memory management + * and stream i/o). + * + * It is included by @FT_FREETYPE_H. + * + */ +#define FT_SYSTEM_H + + + /************************************************************************** + * + * @macro: + * FT_IMAGE_H + * + * @description: + * A macro used in `#include` statements to name the file containing type + * definitions related to glyph images (i.e., bitmaps, outlines, + * scan-converter parameters). + * + * It is included by @FT_FREETYPE_H. + * + */ +#define FT_IMAGE_H + + + /************************************************************************** + * + * @macro: + * FT_TYPES_H + * + * @description: + * A macro used in `#include` statements to name the file containing the + * basic data types defined by FreeType~2. + * + * It is included by @FT_FREETYPE_H. + * + */ +#define FT_TYPES_H + + + /************************************************************************** + * + * @macro: + * FT_LIST_H + * + * @description: + * A macro used in `#include` statements to name the file containing the + * list management API of FreeType~2. + * + * (Most applications will never need to include this file.) + * + */ +#define FT_LIST_H + + + /************************************************************************** + * + * @macro: + * FT_OUTLINE_H + * + * @description: + * A macro used in `#include` statements to name the file containing the + * scalable outline management API of FreeType~2. + * + */ +#define FT_OUTLINE_H + + + /************************************************************************** + * + * @macro: + * FT_SIZES_H + * + * @description: + * A macro used in `#include` statements to name the file containing the + * API which manages multiple @FT_Size objects per face. + * + */ +#define FT_SIZES_H + + + /************************************************************************** + * + * @macro: + * FT_MODULE_H + * + * @description: + * A macro used in `#include` statements to name the file containing the + * module management API of FreeType~2. + * + */ +#define FT_MODULE_H + + + /************************************************************************** + * + * @macro: + * FT_RENDER_H + * + * @description: + * A macro used in `#include` statements to name the file containing the + * renderer module management API of FreeType~2. + * + */ +#define FT_RENDER_H + + + /************************************************************************** + * + * @macro: + * FT_DRIVER_H + * + * @description: + * A macro used in `#include` statements to name the file containing + * structures and macros related to the driver modules. + * + */ +#define FT_DRIVER_H + + + /************************************************************************** + * + * @macro: + * FT_AUTOHINTER_H + * + * @description: + * A macro used in `#include` statements to name the file containing + * structures and macros related to the auto-hinting module. + * + * Deprecated since version~2.9; use @FT_DRIVER_H instead. + * + */ +#define FT_AUTOHINTER_H FT_DRIVER_H + + + /************************************************************************** + * + * @macro: + * FT_CFF_DRIVER_H + * + * @description: + * A macro used in `#include` statements to name the file containing + * structures and macros related to the CFF driver module. + * + * Deprecated since version~2.9; use @FT_DRIVER_H instead. + * + */ +#define FT_CFF_DRIVER_H FT_DRIVER_H + + + /************************************************************************** + * + * @macro: + * FT_TRUETYPE_DRIVER_H + * + * @description: + * A macro used in `#include` statements to name the file containing + * structures and macros related to the TrueType driver module. + * + * Deprecated since version~2.9; use @FT_DRIVER_H instead. + * + */ +#define FT_TRUETYPE_DRIVER_H FT_DRIVER_H + + + /************************************************************************** + * + * @macro: + * FT_PCF_DRIVER_H + * + * @description: + * A macro used in `#include` statements to name the file containing + * structures and macros related to the PCF driver module. + * + * Deprecated since version~2.9; use @FT_DRIVER_H instead. + * + */ +#define FT_PCF_DRIVER_H FT_DRIVER_H + + + /************************************************************************** + * + * @macro: + * FT_TYPE1_TABLES_H + * + * @description: + * A macro used in `#include` statements to name the file containing the + * types and API specific to the Type~1 format. + * + */ +#define FT_TYPE1_TABLES_H + + + /************************************************************************** + * + * @macro: + * FT_TRUETYPE_IDS_H + * + * @description: + * A macro used in `#include` statements to name the file containing the + * enumeration values which identify name strings, languages, encodings, + * etc. This file really contains a _large_ set of constant macro + * definitions, taken from the TrueType and OpenType specifications. + * + */ +#define FT_TRUETYPE_IDS_H + + + /************************************************************************** + * + * @macro: + * FT_TRUETYPE_TABLES_H + * + * @description: + * A macro used in `#include` statements to name the file containing the + * types and API specific to the TrueType (as well as OpenType) format. + * + */ +#define FT_TRUETYPE_TABLES_H + + + /************************************************************************** + * + * @macro: + * FT_TRUETYPE_TAGS_H + * + * @description: + * A macro used in `#include` statements to name the file containing the + * definitions of TrueType four-byte 'tags' which identify blocks in + * SFNT-based font formats (i.e., TrueType and OpenType). + * + */ +#define FT_TRUETYPE_TAGS_H + + + /************************************************************************** + * + * @macro: + * FT_BDF_H + * + * @description: + * A macro used in `#include` statements to name the file containing the + * definitions of an API which accesses BDF-specific strings from a face. + * + */ +#define FT_BDF_H + + + /************************************************************************** + * + * @macro: + * FT_CID_H + * + * @description: + * A macro used in `#include` statements to name the file containing the + * definitions of an API which access CID font information from a face. + * + */ +#define FT_CID_H + + + /************************************************************************** + * + * @macro: + * FT_GZIP_H + * + * @description: + * A macro used in `#include` statements to name the file containing the + * definitions of an API which supports gzip-compressed files. + * + */ +#define FT_GZIP_H + + + /************************************************************************** + * + * @macro: + * FT_LZW_H + * + * @description: + * A macro used in `#include` statements to name the file containing the + * definitions of an API which supports LZW-compressed files. + * + */ +#define FT_LZW_H + + + /************************************************************************** + * + * @macro: + * FT_BZIP2_H + * + * @description: + * A macro used in `#include` statements to name the file containing the + * definitions of an API which supports bzip2-compressed files. + * + */ +#define FT_BZIP2_H + + + /************************************************************************** + * + * @macro: + * FT_WINFONTS_H + * + * @description: + * A macro used in `#include` statements to name the file containing the + * definitions of an API which supports Windows FNT files. + * + */ +#define FT_WINFONTS_H + + + /************************************************************************** + * + * @macro: + * FT_GLYPH_H + * + * @description: + * A macro used in `#include` statements to name the file containing the + * API of the optional glyph management component. + * + */ +#define FT_GLYPH_H + + + /************************************************************************** + * + * @macro: + * FT_BITMAP_H + * + * @description: + * A macro used in `#include` statements to name the file containing the + * API of the optional bitmap conversion component. + * + */ +#define FT_BITMAP_H + + + /************************************************************************** + * + * @macro: + * FT_BBOX_H + * + * @description: + * A macro used in `#include` statements to name the file containing the + * API of the optional exact bounding box computation routines. + * + */ +#define FT_BBOX_H + + + /************************************************************************** + * + * @macro: + * FT_CACHE_H + * + * @description: + * A macro used in `#include` statements to name the file containing the + * API of the optional FreeType~2 cache sub-system. + * + */ +#define FT_CACHE_H + + + /************************************************************************** + * + * @macro: + * FT_MAC_H + * + * @description: + * A macro used in `#include` statements to name the file containing the + * Macintosh-specific FreeType~2 API. The latter is used to access fonts + * embedded in resource forks. + * + * This header file must be explicitly included by client applications + * compiled on the Mac (note that the base API still works though). + * + */ +#define FT_MAC_H + + + /************************************************************************** + * + * @macro: + * FT_MULTIPLE_MASTERS_H + * + * @description: + * A macro used in `#include` statements to name the file containing the + * optional multiple-masters management API of FreeType~2. + * + */ +#define FT_MULTIPLE_MASTERS_H + + + /************************************************************************** + * + * @macro: + * FT_SFNT_NAMES_H + * + * @description: + * A macro used in `#include` statements to name the file containing the + * optional FreeType~2 API which accesses embedded 'name' strings in + * SFNT-based font formats (i.e., TrueType and OpenType). + * + */ +#define FT_SFNT_NAMES_H + + + /************************************************************************** + * + * @macro: + * FT_OPENTYPE_VALIDATE_H + * + * @description: + * A macro used in `#include` statements to name the file containing the + * optional FreeType~2 API which validates OpenType tables ('BASE', + * 'GDEF', 'GPOS', 'GSUB', 'JSTF'). + * + */ +#define FT_OPENTYPE_VALIDATE_H + + + /************************************************************************** + * + * @macro: + * FT_GX_VALIDATE_H + * + * @description: + * A macro used in `#include` statements to name the file containing the + * optional FreeType~2 API which validates TrueTypeGX/AAT tables ('feat', + * 'mort', 'morx', 'bsln', 'just', 'kern', 'opbd', 'trak', 'prop'). + * + */ +#define FT_GX_VALIDATE_H + + + /************************************************************************** + * + * @macro: + * FT_PFR_H + * + * @description: + * A macro used in `#include` statements to name the file containing the + * FreeType~2 API which accesses PFR-specific data. + * + */ +#define FT_PFR_H + + + /************************************************************************** + * + * @macro: + * FT_STROKER_H + * + * @description: + * A macro used in `#include` statements to name the file containing the + * FreeType~2 API which provides functions to stroke outline paths. + */ +#define FT_STROKER_H + + + /************************************************************************** + * + * @macro: + * FT_SYNTHESIS_H + * + * @description: + * A macro used in `#include` statements to name the file containing the + * FreeType~2 API which performs artificial obliquing and emboldening. + */ +#define FT_SYNTHESIS_H + + + /************************************************************************** + * + * @macro: + * FT_FONT_FORMATS_H + * + * @description: + * A macro used in `#include` statements to name the file containing the + * FreeType~2 API which provides functions specific to font formats. + */ +#define FT_FONT_FORMATS_H + + /* deprecated */ +#define FT_XFREE86_H FT_FONT_FORMATS_H + + + /************************************************************************** + * + * @macro: + * FT_TRIGONOMETRY_H + * + * @description: + * A macro used in `#include` statements to name the file containing the + * FreeType~2 API which performs trigonometric computations (e.g., + * cosines and arc tangents). + */ +#define FT_TRIGONOMETRY_H + + + /************************************************************************** + * + * @macro: + * FT_LCD_FILTER_H + * + * @description: + * A macro used in `#include` statements to name the file containing the + * FreeType~2 API which performs color filtering for subpixel rendering. + */ +#define FT_LCD_FILTER_H + + + /************************************************************************** + * + * @macro: + * FT_INCREMENTAL_H + * + * @description: + * A macro used in `#include` statements to name the file containing the + * FreeType~2 API which performs incremental glyph loading. + */ +#define FT_INCREMENTAL_H + + + /************************************************************************** + * + * @macro: + * FT_GASP_H + * + * @description: + * A macro used in `#include` statements to name the file containing the + * FreeType~2 API which returns entries from the TrueType GASP table. + */ +#define FT_GASP_H + + + /************************************************************************** + * + * @macro: + * FT_ADVANCES_H + * + * @description: + * A macro used in `#include` statements to name the file containing the + * FreeType~2 API which returns individual and ranged glyph advances. + */ +#define FT_ADVANCES_H + + + /************************************************************************** + * + * @macro: + * FT_COLOR_H + * + * @description: + * A macro used in `#include` statements to name the file containing the + * FreeType~2 API which handles the OpenType 'CPAL' table. + */ +#define FT_COLOR_H + + + /************************************************************************** + * + * @macro: + * FT_OTSVG_H + * + * @description: + * A macro used in `#include` statements to name the file containing the + * FreeType~2 API which handles the OpenType 'SVG~' glyphs. + */ +#define FT_OTSVG_H + + + /* */ + + /* These header files don't need to be included by the user. */ +#define FT_ERROR_DEFINITIONS_H +#define FT_PARAMETER_TAGS_H + + /* Deprecated macros. */ +#define FT_UNPATENTED_HINTING_H +#define FT_TRUETYPE_UNPATENTED_H + + /* `FT_CACHE_H` is the only header file needed for the cache subsystem. */ +#define FT_CACHE_IMAGE_H FT_CACHE_H +#define FT_CACHE_SMALL_BITMAPS_H FT_CACHE_H +#define FT_CACHE_CHARMAP_H FT_CACHE_H + + /* The internals of the cache sub-system are no longer exposed. We */ + /* default to `FT_CACHE_H` at the moment just in case, but we know */ + /* of no rogue client that uses them. */ + /* */ +#define FT_CACHE_MANAGER_H FT_CACHE_H +#define FT_CACHE_INTERNAL_MRU_H FT_CACHE_H +#define FT_CACHE_INTERNAL_MANAGER_H FT_CACHE_H +#define FT_CACHE_INTERNAL_CACHE_H FT_CACHE_H +#define FT_CACHE_INTERNAL_GLYPH_H FT_CACHE_H +#define FT_CACHE_INTERNAL_IMAGE_H FT_CACHE_H +#define FT_CACHE_INTERNAL_SBITS_H FT_CACHE_H + +/* TODO(david): Move this section below to a different header */ +#ifdef FT2_BUILD_LIBRARY +#if defined( _MSC_VER ) /* Visual C++ (and Intel C++) */ + + /* We disable the warning `conditional expression is constant' here */ + /* in order to compile cleanly with the maximum level of warnings. */ + /* In particular, the warning complains about stuff like `while(0)' */ + /* which is very useful in macro definitions. There is no benefit */ + /* in having it enabled. */ +#pragma warning( disable : 4127 ) + +#endif /* _MSC_VER */ +#endif /* FT2_BUILD_LIBRARY */ + +#endif /* FTHEADER_H_ */ + + +/* END */ diff --git a/dependencies/linux64/include/freetype2/freetype/config/ftmodule.h b/dependencies/linux64/include/freetype2/freetype/config/ftmodule.h new file mode 100644 index 0000000..b315bab --- /dev/null +++ b/dependencies/linux64/include/freetype2/freetype/config/ftmodule.h @@ -0,0 +1,33 @@ +/* + * This file registers the FreeType modules compiled into the library. + * + * If you use GNU make, this file IS NOT USED! Instead, it is created in + * the objects directory (normally `/objs/`) based on information + * from `/modules.cfg`. + * + * Please read `docs/INSTALL.ANY` and `docs/CUSTOMIZE` how to compile + * FreeType without GNU make. + * + */ + +FT_USE_MODULE( FT_Module_Class, autofit_module_class ) +FT_USE_MODULE( FT_Driver_ClassRec, tt_driver_class ) +FT_USE_MODULE( FT_Driver_ClassRec, t1_driver_class ) +FT_USE_MODULE( FT_Driver_ClassRec, cff_driver_class ) +FT_USE_MODULE( FT_Driver_ClassRec, t1cid_driver_class ) +FT_USE_MODULE( FT_Driver_ClassRec, pfr_driver_class ) +FT_USE_MODULE( FT_Driver_ClassRec, t42_driver_class ) +FT_USE_MODULE( FT_Driver_ClassRec, winfnt_driver_class ) +FT_USE_MODULE( FT_Driver_ClassRec, pcf_driver_class ) +FT_USE_MODULE( FT_Driver_ClassRec, bdf_driver_class ) +FT_USE_MODULE( FT_Module_Class, psaux_module_class ) +FT_USE_MODULE( FT_Module_Class, psnames_module_class ) +FT_USE_MODULE( FT_Module_Class, pshinter_module_class ) +FT_USE_MODULE( FT_Module_Class, sfnt_module_class ) +FT_USE_MODULE( FT_Renderer_Class, ft_smooth_renderer_class ) +FT_USE_MODULE( FT_Renderer_Class, ft_raster1_renderer_class ) +FT_USE_MODULE( FT_Renderer_Class, ft_sdf_renderer_class ) +FT_USE_MODULE( FT_Renderer_Class, ft_bitmap_sdf_renderer_class ) +FT_USE_MODULE( FT_Renderer_Class, ft_svg_renderer_class ) + +/* EOF */ diff --git a/dependencies/linux64/include/freetype2/freetype/config/ftoption.h b/dependencies/linux64/include/freetype2/freetype/config/ftoption.h new file mode 100644 index 0000000..a5f96ba --- /dev/null +++ b/dependencies/linux64/include/freetype2/freetype/config/ftoption.h @@ -0,0 +1,1055 @@ +/**************************************************************************** + * + * ftoption.h + * + * User-selectable configuration macros (specification only). + * + * Copyright (C) 1996-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + +#ifndef FTOPTION_H_ +#define FTOPTION_H_ + + +#include + + +FT_BEGIN_HEADER + + /************************************************************************** + * + * USER-SELECTABLE CONFIGURATION MACROS + * + * This file contains the default configuration macro definitions for a + * standard build of the FreeType library. There are three ways to use + * this file to build project-specific versions of the library: + * + * - You can modify this file by hand, but this is not recommended in + * cases where you would like to build several versions of the library + * from a single source directory. + * + * - You can put a copy of this file in your build directory, more + * precisely in `$BUILD/freetype/config/ftoption.h`, where `$BUILD` is + * the name of a directory that is included _before_ the FreeType include + * path during compilation. + * + * The default FreeType Makefiles use the build directory + * `builds/` by default, but you can easily change that for your + * own projects. + * + * - Copy the file to `$BUILD/ft2build.h` and modify it + * slightly to pre-define the macro `FT_CONFIG_OPTIONS_H` used to locate + * this file during the build. For example, + * + * ``` + * #define FT_CONFIG_OPTIONS_H + * #include + * ``` + * + * will use `$BUILD/myftoptions.h` instead of this file for macro + * definitions. + * + * Note also that you can similarly pre-define the macro + * `FT_CONFIG_MODULES_H` used to locate the file listing of the modules + * that are statically linked to the library at compile time. By + * default, this file is ``. + * + * We highly recommend using the third method whenever possible. + * + */ + + + /*************************************************************************/ + /*************************************************************************/ + /**** ****/ + /**** G E N E R A L F R E E T Y P E 2 C O N F I G U R A T I O N ****/ + /**** ****/ + /*************************************************************************/ + /*************************************************************************/ + + + /*#************************************************************************ + * + * If you enable this configuration option, FreeType recognizes an + * environment variable called `FREETYPE_PROPERTIES`, which can be used to + * control the various font drivers and modules. The controllable + * properties are listed in the section @properties. + * + * You have to undefine this configuration option on platforms that lack + * the concept of environment variables (and thus don't have the `getenv` + * function), for example Windows CE. + * + * `FREETYPE_PROPERTIES` has the following syntax form (broken here into + * multiple lines for better readability). + * + * ``` + * + * ':' + * '=' + * + * ':' + * '=' + * ... + * ``` + * + * Example: + * + * ``` + * FREETYPE_PROPERTIES=truetype:interpreter-version=35 \ + * cff:no-stem-darkening=1 + * ``` + * + */ +#define FT_CONFIG_OPTION_ENVIRONMENT_PROPERTIES + + + /************************************************************************** + * + * Uncomment the line below if you want to activate LCD rendering + * technology similar to ClearType in this build of the library. This + * technology triples the resolution in the direction color subpixels. To + * mitigate color fringes inherent to this technology, you also need to + * explicitly set up LCD filtering. + * + * When this macro is not defined, FreeType offers alternative LCD + * rendering technology that produces excellent output. + */ +/* #define FT_CONFIG_OPTION_SUBPIXEL_RENDERING */ + + + /************************************************************************** + * + * Many compilers provide a non-ANSI 64-bit data type that can be used by + * FreeType to speed up some computations. However, this will create some + * problems when compiling the library in strict ANSI mode. + * + * For this reason, the use of 64-bit integers is normally disabled when + * the `__STDC__` macro is defined. You can however disable this by + * defining the macro `FT_CONFIG_OPTION_FORCE_INT64` here. + * + * For most compilers, this will only create compilation warnings when + * building the library. + * + * ObNote: The compiler-specific 64-bit integers are detected in the + * file `ftconfig.h` either statically or through the `configure` + * script on supported platforms. + */ +#undef FT_CONFIG_OPTION_FORCE_INT64 + + + /************************************************************************** + * + * If this macro is defined, do not try to use an assembler version of + * performance-critical functions (e.g., @FT_MulFix). You should only do + * that to verify that the assembler function works properly, or to execute + * benchmark tests of the various implementations. + */ +/* #define FT_CONFIG_OPTION_NO_ASSEMBLER */ + + + /************************************************************************** + * + * If this macro is defined, try to use an inlined assembler version of the + * @FT_MulFix function, which is a 'hotspot' when loading and hinting + * glyphs, and which should be executed as fast as possible. + * + * Note that if your compiler or CPU is not supported, this will default to + * the standard and portable implementation found in `ftcalc.c`. + */ +#define FT_CONFIG_OPTION_INLINE_MULFIX + + + /************************************************************************** + * + * LZW-compressed file support. + * + * FreeType now handles font files that have been compressed with the + * `compress` program. This is mostly used to parse many of the PCF + * files that come with various X11 distributions. The implementation + * uses NetBSD's `zopen` to partially uncompress the file on the fly (see + * `src/lzw/ftgzip.c`). + * + * Define this macro if you want to enable this 'feature'. + */ +#define FT_CONFIG_OPTION_USE_LZW + + + /************************************************************************** + * + * Gzip-compressed file support. + * + * FreeType now handles font files that have been compressed with the + * `gzip` program. This is mostly used to parse many of the PCF files + * that come with XFree86. The implementation uses 'zlib' to partially + * uncompress the file on the fly (see `src/gzip/ftgzip.c`). + * + * Define this macro if you want to enable this 'feature'. See also the + * macro `FT_CONFIG_OPTION_SYSTEM_ZLIB` below. + */ +#define FT_CONFIG_OPTION_USE_ZLIB + + + /************************************************************************** + * + * ZLib library selection + * + * This macro is only used when `FT_CONFIG_OPTION_USE_ZLIB` is defined. + * It allows FreeType's 'ftgzip' component to link to the system's + * installation of the ZLib library. This is useful on systems like + * Unix or VMS where it generally is already available. + * + * If you let it undefined, the component will use its own copy of the + * zlib sources instead. These have been modified to be included + * directly within the component and **not** export external function + * names. This allows you to link any program with FreeType _and_ ZLib + * without linking conflicts. + * + * Do not `#undef` this macro here since the build system might define + * it for certain configurations only. + * + * If you use a build system like cmake or the `configure` script, + * options set by those programs have precedence, overwriting the value + * here with the configured one. + * + * If you use the GNU make build system directly (that is, without the + * `configure` script) and you define this macro, you also have to pass + * `SYSTEM_ZLIB=yes` as an argument to make. + */ +#define FT_CONFIG_OPTION_SYSTEM_ZLIB + + + /************************************************************************** + * + * Bzip2-compressed file support. + * + * FreeType now handles font files that have been compressed with the + * `bzip2` program. This is mostly used to parse many of the PCF files + * that come with XFree86. The implementation uses `libbz2` to partially + * uncompress the file on the fly (see `src/bzip2/ftbzip2.c`). Contrary + * to gzip, bzip2 currently is not included and need to use the system + * available bzip2 implementation. + * + * Define this macro if you want to enable this 'feature'. + * + * If you use a build system like cmake or the `configure` script, + * options set by those programs have precedence, overwriting the value + * here with the configured one. + */ +#define FT_CONFIG_OPTION_USE_BZIP2 + + + /************************************************************************** + * + * Define to disable the use of file stream functions and types, `FILE`, + * `fopen`, etc. Enables the use of smaller system libraries on embedded + * systems that have multiple system libraries, some with or without file + * stream support, in the cases where file stream support is not necessary + * such as memory loading of font files. + */ +/* #define FT_CONFIG_OPTION_DISABLE_STREAM_SUPPORT */ + + + /************************************************************************** + * + * PNG bitmap support. + * + * FreeType now handles loading color bitmap glyphs in the PNG format. + * This requires help from the external libpng library. Uncompressed + * color bitmaps do not need any external libraries and will be supported + * regardless of this configuration. + * + * Define this macro if you want to enable this 'feature'. + * + * If you use a build system like cmake or the `configure` script, + * options set by those programs have precedence, overwriting the value + * here with the configured one. + */ +#define FT_CONFIG_OPTION_USE_PNG + + + /************************************************************************** + * + * HarfBuzz support. + * + * FreeType uses the HarfBuzz library to improve auto-hinting of OpenType + * fonts. If available, many glyphs not directly addressable by a font's + * character map will be hinted also. + * + * Define this macro if you want to enable this 'feature'. + * + * If you use a build system like cmake or the `configure` script, + * options set by those programs have precedence, overwriting the value + * here with the configured one. + */ +/* #define FT_CONFIG_OPTION_USE_HARFBUZZ */ + + + /************************************************************************** + * + * HarfBuzz dynamic support. + * + * Define this macro if you want the HarfBuzz library to be loaded at + * runtime instead of being linked to FreeType. + * + * This option has no effect if `FT_CONFIG_OPTION_USE_HARFBUZZ` is not + * defined. + * + * When this option is enabled, FreeType will try to load the HarfBuzz + * library at runtime, using `dlopen` or `LoadLibrary`, depending on the + * platform. On Microsoft platforms, the library name looked up is + * `libharfbuzz-0.dll`. On Apple platforms, the library name looked up + * is `libharfbuzz.0.dylib`. On all other platforms, the library name + * looked up is `libharfbuzz.so.0`. This name can be overridden by + * defining the macro `FT_LIBHARFBUZZ` at FreeType compilation time. + * + * If you use a build system like cmake or the `configure` script, + * options set by those programs have precedence, overwriting the value + * here with the configured one. + */ +/* #define FT_CONFIG_OPTION_USE_HARFBUZZ_DYNAMIC */ + + + /************************************************************************** + * + * Brotli support. + * + * FreeType uses the Brotli library to provide support for decompressing + * WOFF2 streams. + * + * Define this macro if you want to enable this 'feature'. + * + * If you use a build system like cmake or the `configure` script, + * options set by those programs have precedence, overwriting the value + * here with the configured one. + */ +#define FT_CONFIG_OPTION_USE_BROTLI + + + /************************************************************************** + * + * Glyph Postscript Names handling + * + * By default, FreeType 2 is compiled with the 'psnames' module. This + * module is in charge of converting a glyph name string into a Unicode + * value, or return a Macintosh standard glyph name for the use with the + * TrueType 'post' table. + * + * Undefine this macro if you do not want 'psnames' compiled in your + * build of FreeType. This has the following effects: + * + * - The TrueType driver will provide its own set of glyph names, if you + * build it to support postscript names in the TrueType 'post' table, + * but will not synthesize a missing Unicode charmap. + * + * - The Type~1 driver will not be able to synthesize a Unicode charmap + * out of the glyphs found in the fonts. + * + * You would normally undefine this configuration macro when building a + * version of FreeType that doesn't contain a Type~1 or CFF driver. + */ +#define FT_CONFIG_OPTION_POSTSCRIPT_NAMES + + + /************************************************************************** + * + * Postscript Names to Unicode Values support + * + * By default, FreeType~2 is built with the 'psnames' module compiled in. + * Among other things, the module is used to convert a glyph name into a + * Unicode value. This is especially useful in order to synthesize on + * the fly a Unicode charmap from the CFF/Type~1 driver through a big + * table named the 'Adobe Glyph List' (AGL). + * + * Undefine this macro if you do not want the Adobe Glyph List compiled + * in your 'psnames' module. The Type~1 driver will not be able to + * synthesize a Unicode charmap out of the glyphs found in the fonts. + */ +#define FT_CONFIG_OPTION_ADOBE_GLYPH_LIST + + + /************************************************************************** + * + * Support for Mac fonts + * + * Define this macro if you want support for outline fonts in Mac format + * (mac dfont, mac resource, macbinary containing a mac resource) on + * non-Mac platforms. + * + * Note that the 'FOND' resource isn't checked. + */ +#define FT_CONFIG_OPTION_MAC_FONTS + + + /************************************************************************** + * + * Guessing methods to access embedded resource forks + * + * Enable extra Mac fonts support on non-Mac platforms (e.g., GNU/Linux). + * + * Resource forks which include fonts data are stored sometimes in + * locations which users or developers don't expected. In some cases, + * resource forks start with some offset from the head of a file. In + * other cases, the actual resource fork is stored in file different from + * what the user specifies. If this option is activated, FreeType tries + * to guess whether such offsets or different file names must be used. + * + * Note that normal, direct access of resource forks is controlled via + * the `FT_CONFIG_OPTION_MAC_FONTS` option. + */ +#ifdef FT_CONFIG_OPTION_MAC_FONTS +#define FT_CONFIG_OPTION_GUESSING_EMBEDDED_RFORK +#endif + + + /************************************************************************** + * + * Allow the use of `FT_Incremental_Interface` to load typefaces that + * contain no glyph data, but supply it via a callback function. This is + * required by clients supporting document formats which supply font data + * incrementally as the document is parsed, such as the Ghostscript + * interpreter for the PostScript language. + */ +#define FT_CONFIG_OPTION_INCREMENTAL + + + /************************************************************************** + * + * The size in bytes of the render pool used by the scan-line converter to + * do all of its work. + */ +#define FT_RENDER_POOL_SIZE 16384L + + + /************************************************************************** + * + * FT_MAX_MODULES + * + * The maximum number of modules that can be registered in a single + * FreeType library object. 32~is the default. + */ +#define FT_MAX_MODULES 32 + + + /************************************************************************** + * + * Debug level + * + * FreeType can be compiled in debug or trace mode. In debug mode, + * errors are reported through the 'ftdebug' component. In trace mode, + * additional messages are sent to the standard output during execution. + * + * Define `FT_DEBUG_LEVEL_ERROR` to build the library in debug mode. + * Define `FT_DEBUG_LEVEL_TRACE` to build it in trace mode. + * + * Don't define any of these macros to compile in 'release' mode! + * + * Do not `#undef` these macros here since the build system might define + * them for certain configurations only. + */ +/* #define FT_DEBUG_LEVEL_ERROR */ +/* #define FT_DEBUG_LEVEL_TRACE */ + + + /************************************************************************** + * + * Logging + * + * Compiling FreeType in debug or trace mode makes FreeType write error + * and trace log messages to `stderr`. Enabling this macro + * automatically forces the `FT_DEBUG_LEVEL_ERROR` and + * `FT_DEBUG_LEVEL_TRACE` macros and allows FreeType to write error and + * trace log messages to a file instead of `stderr`. For writing logs + * to a file, FreeType uses an the external `dlg` library (the source + * code is in `src/dlg`). + * + * This option needs a C99 compiler. + */ +/* #define FT_DEBUG_LOGGING */ + + + /************************************************************************** + * + * Autofitter debugging + * + * If `FT_DEBUG_AUTOFIT` is defined, FreeType provides some means to + * control the autofitter behaviour for debugging purposes with global + * boolean variables (consequently, you should **never** enable this + * while compiling in 'release' mode): + * + * ``` + * af_debug_disable_horz_hints_ + * af_debug_disable_vert_hints_ + * af_debug_disable_blue_hints_ + * ``` + * + * Additionally, the following functions provide dumps of various + * internal autofit structures to stdout (using `printf`): + * + * ``` + * af_glyph_hints_dump_points + * af_glyph_hints_dump_segments + * af_glyph_hints_dump_edges + * af_glyph_hints_get_num_segments + * af_glyph_hints_get_segment_offset + * ``` + * + * As an argument, they use another global variable: + * + * ``` + * af_debug_hints_ + * ``` + * + * Please have a look at the `ftgrid` demo program to see how those + * variables and macros should be used. + * + * Do not `#undef` these macros here since the build system might define + * them for certain configurations only. + */ +/* #define FT_DEBUG_AUTOFIT */ + + + /************************************************************************** + * + * Memory Debugging + * + * FreeType now comes with an integrated memory debugger that is capable + * of detecting simple errors like memory leaks or double deletes. To + * compile it within your build of the library, you should define + * `FT_DEBUG_MEMORY` here. + * + * Note that the memory debugger is only activated at runtime when when + * the _environment_ variable `FT2_DEBUG_MEMORY` is defined also! + * + * Do not `#undef` this macro here since the build system might define it + * for certain configurations only. + */ +/* #define FT_DEBUG_MEMORY */ + + + /************************************************************************** + * + * Module errors + * + * If this macro is set (which is _not_ the default), the higher byte of + * an error code gives the module in which the error has occurred, while + * the lower byte is the real error code. + * + * Setting this macro makes sense for debugging purposes only, since it + * would break source compatibility of certain programs that use + * FreeType~2. + * + * More details can be found in the files `ftmoderr.h` and `fterrors.h`. + */ +#undef FT_CONFIG_OPTION_USE_MODULE_ERRORS + + + /************************************************************************** + * + * OpenType SVG Glyph Support + * + * Setting this macro enables support for OpenType SVG glyphs. By + * default, FreeType can only fetch SVG documents. However, it can also + * render them if external rendering hook functions are plugged in at + * runtime. + * + * More details on the hooks can be found in file `otsvg.h`. + */ +#define FT_CONFIG_OPTION_SVG + + + /************************************************************************** + * + * Error Strings + * + * If this macro is set, `FT_Error_String` will return meaningful + * descriptions. This is not enabled by default to reduce the overall + * size of FreeType. + * + * More details can be found in the file `fterrors.h`. + */ +/* #define FT_CONFIG_OPTION_ERROR_STRINGS */ + + + /*************************************************************************/ + /*************************************************************************/ + /**** ****/ + /**** S F N T D R I V E R C O N F I G U R A T I O N ****/ + /**** ****/ + /*************************************************************************/ + /*************************************************************************/ + + + /************************************************************************** + * + * Define `TT_CONFIG_OPTION_EMBEDDED_BITMAPS` if you want to support + * embedded bitmaps in all formats using the 'sfnt' module (namely + * TrueType~& OpenType). + */ +#define TT_CONFIG_OPTION_EMBEDDED_BITMAPS + + + /************************************************************************** + * + * Define `TT_CONFIG_OPTION_COLOR_LAYERS` if you want to support colored + * outlines (from the 'COLR'/'CPAL' tables) in all formats using the 'sfnt' + * module (namely TrueType~& OpenType). + */ +#define TT_CONFIG_OPTION_COLOR_LAYERS + + + /************************************************************************** + * + * Define `TT_CONFIG_OPTION_POSTSCRIPT_NAMES` if you want to be able to + * load and enumerate Postscript names of glyphs in a TrueType or OpenType + * file. + * + * Note that if you do not compile the 'psnames' module by undefining the + * above `FT_CONFIG_OPTION_POSTSCRIPT_NAMES` macro, the 'sfnt' module will + * contain additional code to read the PostScript name table from a font. + * + * (By default, the module uses 'psnames' to extract glyph names.) + */ +#define TT_CONFIG_OPTION_POSTSCRIPT_NAMES + + + /************************************************************************** + * + * Define `TT_CONFIG_OPTION_SFNT_NAMES` if your applications need to access + * the internal name table in a SFNT-based format like TrueType or + * OpenType. The name table contains various strings used to describe the + * font, like family name, copyright, version, etc. It does not contain + * any glyph name though. + * + * Accessing SFNT names is done through the functions declared in + * `ftsnames.h`. + */ +#define TT_CONFIG_OPTION_SFNT_NAMES + + + /************************************************************************** + * + * TrueType CMap support + * + * Here you can fine-tune which TrueType CMap table format shall be + * supported. + */ +#define TT_CONFIG_CMAP_FORMAT_0 +#define TT_CONFIG_CMAP_FORMAT_2 +#define TT_CONFIG_CMAP_FORMAT_4 +#define TT_CONFIG_CMAP_FORMAT_6 +#define TT_CONFIG_CMAP_FORMAT_8 +#define TT_CONFIG_CMAP_FORMAT_10 +#define TT_CONFIG_CMAP_FORMAT_12 +#define TT_CONFIG_CMAP_FORMAT_13 +#define TT_CONFIG_CMAP_FORMAT_14 + + + /*************************************************************************/ + /*************************************************************************/ + /**** ****/ + /**** T R U E T Y P E D R I V E R C O N F I G U R A T I O N ****/ + /**** ****/ + /*************************************************************************/ + /*************************************************************************/ + + /************************************************************************** + * + * Define `TT_CONFIG_OPTION_BYTECODE_INTERPRETER` if you want to compile a + * bytecode interpreter in the TrueType driver. + * + * By undefining this, you will only compile the code necessary to load + * TrueType glyphs without hinting. + * + * Do not `#undef` this macro here, since the build system might define it + * for certain configurations only. + */ +#define TT_CONFIG_OPTION_BYTECODE_INTERPRETER + + + /************************************************************************** + * + * Define `TT_CONFIG_OPTION_SUBPIXEL_HINTING` if you want to compile + * subpixel hinting support into the TrueType driver. This modifies the + * TrueType hinting mechanism when anything but `FT_RENDER_MODE_MONO` is + * requested. + * + * In particular, it modifies the bytecode interpreter to interpret (or + * not) instructions in a certain way so that all TrueType fonts look like + * they do in a Windows ClearType (DirectWrite) environment. See [1] for a + * technical overview on what this means. See `ttinterp.h` for more + * details on this option. + * + * The new default mode focuses on applying a minimal set of rules to all + * fonts indiscriminately so that modern and web fonts render well while + * legacy fonts render okay. The corresponding interpreter version is v40. + * The so-called Infinality mode (v38) is no longer available in FreeType. + * + * By undefining these, you get rendering behavior like on Windows without + * ClearType, i.e., Windows XP without ClearType enabled and Win9x + * (interpreter version v35). Or not, depending on how much hinting blood + * and testing tears the font designer put into a given font. If you + * define one or both subpixel hinting options, you can switch between + * between v35 and the ones you define (using `FT_Property_Set`). + * + * This option requires `TT_CONFIG_OPTION_BYTECODE_INTERPRETER` to be + * defined. + * + * [1] + * https://learn.microsoft.com/typography/cleartype/truetypecleartype + */ +#define TT_CONFIG_OPTION_SUBPIXEL_HINTING + + + /************************************************************************** + * + * Define `TT_CONFIG_OPTION_COMPONENT_OFFSET_SCALED` to compile the + * TrueType glyph loader to use Apple's definition of how to handle + * component offsets in composite glyphs. + * + * Apple and MS disagree on the default behavior of component offsets in + * composites. Apple says that they should be scaled by the scaling + * factors in the transformation matrix (roughly, it's more complex) while + * MS says they should not. OpenType defines two bits in the composite + * flags array which can be used to disambiguate, but old fonts will not + * have them. + * + * https://learn.microsoft.com/typography/opentype/spec/glyf + * https://developer.apple.com/fonts/TrueType-Reference-Manual/RM06/Chap6glyf.html + */ +#undef TT_CONFIG_OPTION_COMPONENT_OFFSET_SCALED + + + /************************************************************************** + * + * Define `TT_CONFIG_OPTION_GX_VAR_SUPPORT` if you want to include support + * for Apple's distortable font technology ('fvar', 'gvar', 'cvar', and + * 'avar' tables). Tagged 'Font Variations', this is now part of OpenType + * also. This has many similarities to Type~1 Multiple Masters support. + */ +#define TT_CONFIG_OPTION_GX_VAR_SUPPORT + + + /************************************************************************** + * + * Define `TT_CONFIG_OPTION_NO_BORING_EXPANSION` if you want to exclude + * support for 'boring' OpenType specification expansions. + * + * https://github.com/harfbuzz/boring-expansion-spec + * + * Right now, the following features are covered: + * + * - 'avar' version 2.0 + * + * Most likely, this is a temporary configuration option to be removed in + * the near future, since it is assumed that eventually those features are + * added to the OpenType standard. + */ +/* #define TT_CONFIG_OPTION_NO_BORING_EXPANSION */ + + + /************************************************************************** + * + * Define `TT_CONFIG_OPTION_BDF` if you want to include support for an + * embedded 'BDF~' table within SFNT-based bitmap formats. + */ +#define TT_CONFIG_OPTION_BDF + + + /************************************************************************** + * + * Option `TT_CONFIG_OPTION_MAX_RUNNABLE_OPCODES` controls the maximum + * number of bytecode instructions executed for a single run of the + * bytecode interpreter, needed to prevent infinite loops. You don't want + * to change this except for very special situations (e.g., making a + * library fuzzer spend less time to handle broken fonts). + * + * It is not expected that this value is ever modified by a configuring + * script; instead, it gets surrounded with `#ifndef ... #endif` so that + * the value can be set as a preprocessor option on the compiler's command + * line. + */ +#ifndef TT_CONFIG_OPTION_MAX_RUNNABLE_OPCODES +#define TT_CONFIG_OPTION_MAX_RUNNABLE_OPCODES 1000000L +#endif + + + /************************************************************************** + * + * Option `TT_CONFIG_OPTION_GPOS_KERNING` enables a basic GPOS kerning + * implementation (for TrueType fonts only). With this defined, FreeType + * is able to get kerning pair data from the GPOS 'kern' feature as well as + * legacy 'kern' tables; without this defined, FreeType will only be able + * to use legacy 'kern' tables. + * + * Note that FreeType does not support more advanced GPOS layout features; + * even the 'kern' feature implemented here doesn't handle more + * sophisticated kerning variants. Use a higher-level library like + * HarfBuzz instead for that. + */ +/* #define TT_CONFIG_OPTION_GPOS_KERNING */ + + + /*************************************************************************/ + /*************************************************************************/ + /**** ****/ + /**** T Y P E 1 D R I V E R C O N F I G U R A T I O N ****/ + /**** ****/ + /*************************************************************************/ + /*************************************************************************/ + + + /************************************************************************** + * + * `T1_MAX_DICT_DEPTH` is the maximum depth of nest dictionaries and arrays + * in the Type~1 stream (see `t1load.c`). A minimum of~4 is required. + */ +#define T1_MAX_DICT_DEPTH 5 + + + /************************************************************************** + * + * `T1_MAX_SUBRS_CALLS` details the maximum number of nested sub-routine + * calls during glyph loading. + */ +#define T1_MAX_SUBRS_CALLS 16 + + + /************************************************************************** + * + * `T1_MAX_CHARSTRING_OPERANDS` is the charstring stack's capacity. A + * minimum of~16 is required. + * + * The Chinese font 'MingTiEG-Medium' (covering the CNS 11643 character + * set) needs 256. + */ +#define T1_MAX_CHARSTRINGS_OPERANDS 256 + + + /************************************************************************** + * + * Define this configuration macro if you want to prevent the compilation + * of the 't1afm' module, which is in charge of reading Type~1 AFM files + * into an existing face. Note that if set, the Type~1 driver will be + * unable to produce kerning distances. + */ +#undef T1_CONFIG_OPTION_NO_AFM + + + /************************************************************************** + * + * Define this configuration macro if you want to prevent the compilation + * of the Multiple Masters font support in the Type~1 driver. + */ +#undef T1_CONFIG_OPTION_NO_MM_SUPPORT + + + /************************************************************************** + * + * `T1_CONFIG_OPTION_OLD_ENGINE` controls whether the pre-Adobe Type~1 + * engine gets compiled into FreeType. If defined, it is possible to + * switch between the two engines using the `hinting-engine` property of + * the 'type1' driver module. + */ +/* #define T1_CONFIG_OPTION_OLD_ENGINE */ + + + /*************************************************************************/ + /*************************************************************************/ + /**** ****/ + /**** C F F D R I V E R C O N F I G U R A T I O N ****/ + /**** ****/ + /*************************************************************************/ + /*************************************************************************/ + + + /************************************************************************** + * + * Using `CFF_CONFIG_OPTION_DARKENING_PARAMETER_{X,Y}{1,2,3,4}` it is + * possible to set up the default values of the four control points that + * define the stem darkening behaviour of the (new) CFF engine. For more + * details please read the documentation of the `darkening-parameters` + * property (file `ftdriver.h`), which allows the control at run-time. + * + * Do **not** undefine these macros! + */ +#define CFF_CONFIG_OPTION_DARKENING_PARAMETER_X1 500 +#define CFF_CONFIG_OPTION_DARKENING_PARAMETER_Y1 400 + +#define CFF_CONFIG_OPTION_DARKENING_PARAMETER_X2 1000 +#define CFF_CONFIG_OPTION_DARKENING_PARAMETER_Y2 275 + +#define CFF_CONFIG_OPTION_DARKENING_PARAMETER_X3 1667 +#define CFF_CONFIG_OPTION_DARKENING_PARAMETER_Y3 275 + +#define CFF_CONFIG_OPTION_DARKENING_PARAMETER_X4 2333 +#define CFF_CONFIG_OPTION_DARKENING_PARAMETER_Y4 0 + + + /************************************************************************** + * + * `CFF_CONFIG_OPTION_OLD_ENGINE` controls whether the pre-Adobe CFF engine + * gets compiled into FreeType. If defined, it is possible to switch + * between the two engines using the `hinting-engine` property of the 'cff' + * driver module. + */ +/* #define CFF_CONFIG_OPTION_OLD_ENGINE */ + + + /*************************************************************************/ + /*************************************************************************/ + /**** ****/ + /**** P C F D R I V E R C O N F I G U R A T I O N ****/ + /**** ****/ + /*************************************************************************/ + /*************************************************************************/ + + + /************************************************************************** + * + * There are many PCF fonts just called 'Fixed' which look completely + * different, and which have nothing to do with each other. When selecting + * 'Fixed' in KDE or Gnome one gets results that appear rather random, the + * style changes often if one changes the size and one cannot select some + * fonts at all. This option makes the 'pcf' module prepend the foundry + * name (plus a space) to the family name. + * + * We also check whether we have 'wide' characters; all put together, we + * get family names like 'Sony Fixed' or 'Misc Fixed Wide'. + * + * If this option is activated, it can be controlled with the + * `no-long-family-names` property of the 'pcf' driver module. + */ +/* #define PCF_CONFIG_OPTION_LONG_FAMILY_NAMES */ + + + /*************************************************************************/ + /*************************************************************************/ + /**** ****/ + /**** A U T O F I T M O D U L E C O N F I G U R A T I O N ****/ + /**** ****/ + /*************************************************************************/ + /*************************************************************************/ + + + /************************************************************************** + * + * Compile 'autofit' module with CJK (Chinese, Japanese, Korean) script + * support. + */ +#define AF_CONFIG_OPTION_CJK + + + /************************************************************************** + * + * Compile 'autofit' module with fallback Indic script support, covering + * some scripts that the 'latin' submodule of the 'autofit' module doesn't + * (yet) handle. Currently, this needs option `AF_CONFIG_OPTION_CJK`. + */ +#ifdef AF_CONFIG_OPTION_CJK +#define AF_CONFIG_OPTION_INDIC +#endif + + + /************************************************************************** + * + * Use TrueType-like size metrics for 'light' auto-hinting. + * + * It is strongly recommended to avoid this option, which exists only to + * help some legacy applications retain its appearance and behaviour with + * respect to auto-hinted TrueType fonts. + * + * The very reason this option exists at all are GNU/Linux distributions + * like Fedora that did not un-patch the following change (which was + * present in FreeType between versions 2.4.6 and 2.7.1, inclusive). + * + * ``` + * 2011-07-16 Steven Chu + * + * [truetype] Fix metrics on size request for scalable fonts. + * ``` + * + * This problematic commit is now reverted (more or less). + */ +/* #define AF_CONFIG_OPTION_TT_SIZE_METRICS */ + + /* */ + + + /* + * This macro is obsolete. Support has been removed in FreeType version + * 2.5. + */ +/* #define FT_CONFIG_OPTION_OLD_INTERNALS */ + + + /* + * The next two macros are defined if native TrueType hinting is + * requested by the definitions above. Don't change this. + */ +#ifdef TT_CONFIG_OPTION_BYTECODE_INTERPRETER +#define TT_USE_BYTECODE_INTERPRETER +#ifdef TT_CONFIG_OPTION_SUBPIXEL_HINTING +#define TT_SUPPORT_SUBPIXEL_HINTING_MINIMAL +#endif +#endif + + + /* + * The TT_SUPPORT_COLRV1 macro is defined to indicate to clients that this + * version of FreeType has support for 'COLR' v1 API. This definition is + * useful to FreeType clients that want to build in support for 'COLR' v1 + * depending on a tip-of-tree checkout before it is officially released in + * FreeType, and while the feature cannot yet be tested against using + * version macros. Don't change this macro. This may be removed once the + * feature is in a FreeType release version and version macros can be used + * to test for availability. + */ +#ifdef TT_CONFIG_OPTION_COLOR_LAYERS +#define TT_SUPPORT_COLRV1 +#endif + + + /* + * Check CFF darkening parameters. The checks are the same as in function + * `cff_property_set` in file `cffdrivr.c`. + */ +#if CFF_CONFIG_OPTION_DARKENING_PARAMETER_X1 < 0 || \ + CFF_CONFIG_OPTION_DARKENING_PARAMETER_X2 < 0 || \ + CFF_CONFIG_OPTION_DARKENING_PARAMETER_X3 < 0 || \ + CFF_CONFIG_OPTION_DARKENING_PARAMETER_X4 < 0 || \ + \ + CFF_CONFIG_OPTION_DARKENING_PARAMETER_Y1 < 0 || \ + CFF_CONFIG_OPTION_DARKENING_PARAMETER_Y2 < 0 || \ + CFF_CONFIG_OPTION_DARKENING_PARAMETER_Y3 < 0 || \ + CFF_CONFIG_OPTION_DARKENING_PARAMETER_Y4 < 0 || \ + \ + CFF_CONFIG_OPTION_DARKENING_PARAMETER_X1 > \ + CFF_CONFIG_OPTION_DARKENING_PARAMETER_X2 || \ + CFF_CONFIG_OPTION_DARKENING_PARAMETER_X2 > \ + CFF_CONFIG_OPTION_DARKENING_PARAMETER_X3 || \ + CFF_CONFIG_OPTION_DARKENING_PARAMETER_X3 > \ + CFF_CONFIG_OPTION_DARKENING_PARAMETER_X4 || \ + \ + CFF_CONFIG_OPTION_DARKENING_PARAMETER_Y1 > 500 || \ + CFF_CONFIG_OPTION_DARKENING_PARAMETER_Y2 > 500 || \ + CFF_CONFIG_OPTION_DARKENING_PARAMETER_Y3 > 500 || \ + CFF_CONFIG_OPTION_DARKENING_PARAMETER_Y4 > 500 +#error "Invalid CFF darkening parameters!" +#endif + + +FT_END_HEADER + +#endif /* FTOPTION_H_ */ + + +/* END */ diff --git a/dependencies/linux64/include/freetype2/freetype/config/ftstdlib.h b/dependencies/linux64/include/freetype2/freetype/config/ftstdlib.h new file mode 100644 index 0000000..e17aa7b --- /dev/null +++ b/dependencies/linux64/include/freetype2/freetype/config/ftstdlib.h @@ -0,0 +1,185 @@ +/**************************************************************************** + * + * ftstdlib.h + * + * ANSI-specific library and header configuration file (specification + * only). + * + * Copyright (C) 2002-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + + /************************************************************************** + * + * This file is used to group all `#includes` to the ANSI~C library that + * FreeType normally requires. It also defines macros to rename the + * standard functions within the FreeType source code. + * + * Load a file which defines `FTSTDLIB_H_` before this one to override it. + * + */ + + +#ifndef FTSTDLIB_H_ +#define FTSTDLIB_H_ + + +#include + +#define ft_ptrdiff_t ptrdiff_t + + + /************************************************************************** + * + * integer limits + * + * `UINT_MAX` and `ULONG_MAX` are used to automatically compute the size of + * `int` and `long` in bytes at compile-time. So far, this works for all + * platforms the library has been tested on. We also check `ULLONG_MAX` + * to see whether we can use 64-bit `long long` later on. + * + * Note that on the extremely rare platforms that do not provide integer + * types that are _exactly_ 16 and 32~bits wide (e.g., some old Crays where + * `int` is 36~bits), we do not make any guarantee about the correct + * behaviour of FreeType~2 with all fonts. + * + * In these cases, `ftconfig.h` will refuse to compile anyway with a + * message like 'couldn't find 32-bit type' or something similar. + * + */ + + +#include + +#define FT_CHAR_BIT CHAR_BIT +#define FT_USHORT_MAX USHRT_MAX +#define FT_INT_MAX INT_MAX +#define FT_INT_MIN INT_MIN +#define FT_UINT_MAX UINT_MAX +#define FT_LONG_MIN LONG_MIN +#define FT_LONG_MAX LONG_MAX +#define FT_ULONG_MAX ULONG_MAX +#ifdef LLONG_MAX +#define FT_LLONG_MAX LLONG_MAX +#endif +#ifdef LLONG_MIN +#define FT_LLONG_MIN LLONG_MIN +#endif +#ifdef ULLONG_MAX +#define FT_ULLONG_MAX ULLONG_MAX +#endif + + + /************************************************************************** + * + * character and string processing + * + */ + + +#include + +#define ft_memchr memchr +#define ft_memcmp memcmp +#define ft_memcpy memcpy +#define ft_memmove memmove +#define ft_memset memset +#define ft_strcat strcat +#define ft_strcmp strcmp +#define ft_strcpy strcpy +#define ft_strlen strlen +#define ft_strncmp strncmp +#define ft_strncpy strncpy +#define ft_strrchr strrchr +#define ft_strstr strstr + + + /************************************************************************** + * + * file handling + * + */ + + +#include + +#define FT_FILE FILE +#define ft_fclose fclose +#define ft_fopen fopen +#define ft_fread fread +#define ft_fseek fseek +#define ft_ftell ftell +#define ft_snprintf snprintf + + + /************************************************************************** + * + * sorting + * + */ + + +#include + +#define ft_qsort qsort + + + /************************************************************************** + * + * memory allocation + * + */ + + +#define ft_scalloc calloc +#define ft_sfree free +#define ft_smalloc malloc +#define ft_srealloc realloc + + + /************************************************************************** + * + * miscellaneous + * + */ + + +#define ft_strtol strtol +#define ft_getenv getenv + + + /************************************************************************** + * + * execution control + * + */ + + +#include + +#define ft_jmp_buf jmp_buf /* note: this cannot be a typedef since */ + /* `jmp_buf` is defined as a macro */ + /* on certain platforms */ + +#define ft_longjmp longjmp +#define ft_setjmp( b ) setjmp( *(ft_jmp_buf*) &(b) ) /* same thing here */ + + + /* The following is only used for debugging purposes, i.e., if */ + /* `FT_DEBUG_LEVEL_ERROR` or `FT_DEBUG_LEVEL_TRACE` are defined. */ + +#include + + +#endif /* FTSTDLIB_H_ */ + + +/* END */ diff --git a/dependencies/linux64/include/freetype2/freetype/config/integer-types.h b/dependencies/linux64/include/freetype2/freetype/config/integer-types.h new file mode 100644 index 0000000..36a0bbc --- /dev/null +++ b/dependencies/linux64/include/freetype2/freetype/config/integer-types.h @@ -0,0 +1,277 @@ +/**************************************************************************** + * + * config/integer-types.h + * + * FreeType integer types definitions. + * + * Copyright (C) 1996-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ +#ifndef FREETYPE_CONFIG_INTEGER_TYPES_H_ +#define FREETYPE_CONFIG_INTEGER_TYPES_H_ + +FT_BEGIN_HEADER + + /* There are systems (like the Texas Instruments 'C54x) where a `char` */ + /* has 16~bits. ANSI~C says that `sizeof(char)` is always~1. Since an */ + /* `int` has 16~bits also for this system, `sizeof(int)` gives~1 which */ + /* is probably unexpected. */ + /* */ + /* `CHAR_BIT` (defined in `limits.h`) gives the number of bits in a */ + /* `char` type. */ + +#ifndef FT_CHAR_BIT +#define FT_CHAR_BIT CHAR_BIT +#endif + +#ifndef FT_SIZEOF_INT + + /* The size of an `int` type. */ +#if FT_UINT_MAX == 0xFFFFUL +#define FT_SIZEOF_INT ( 16 / FT_CHAR_BIT ) +#elif FT_UINT_MAX == 0xFFFFFFFFUL +#define FT_SIZEOF_INT ( 32 / FT_CHAR_BIT ) +#elif FT_UINT_MAX > 0xFFFFFFFFUL && FT_UINT_MAX == 0xFFFFFFFFFFFFFFFFUL +#define FT_SIZEOF_INT ( 64 / FT_CHAR_BIT ) +#else +#error "Unsupported size of `int' type!" +#endif + +#endif /* !defined(FT_SIZEOF_INT) */ + +#ifndef FT_SIZEOF_LONG + + /* The size of a `long` type. A five-byte `long` (as used e.g. on the */ + /* DM642) is recognized but avoided. */ +#if FT_ULONG_MAX == 0xFFFFFFFFUL +#define FT_SIZEOF_LONG ( 32 / FT_CHAR_BIT ) +#elif FT_ULONG_MAX > 0xFFFFFFFFUL && FT_ULONG_MAX == 0xFFFFFFFFFFUL +#define FT_SIZEOF_LONG ( 32 / FT_CHAR_BIT ) +#elif FT_ULONG_MAX > 0xFFFFFFFFUL && FT_ULONG_MAX == 0xFFFFFFFFFFFFFFFFUL +#define FT_SIZEOF_LONG ( 64 / FT_CHAR_BIT ) +#else +#error "Unsupported size of `long' type!" +#endif + +#endif /* !defined(FT_SIZEOF_LONG) */ + +#ifndef FT_SIZEOF_LONG_LONG + + /* The size of a `long long` type if available */ +#if defined( FT_ULLONG_MAX ) && FT_ULLONG_MAX >= 0xFFFFFFFFFFFFFFFFULL +#define FT_SIZEOF_LONG_LONG ( 64 / FT_CHAR_BIT ) +#else +#define FT_SIZEOF_LONG_LONG 0 +#endif + +#endif /* !defined(FT_SIZEOF_LONG_LONG) */ + + + /************************************************************************** + * + * @section: + * basic_types + * + */ + + + /************************************************************************** + * + * @type: + * FT_Int16 + * + * @description: + * A typedef for a 16bit signed integer type. + */ + typedef signed short FT_Int16; + + + /************************************************************************** + * + * @type: + * FT_UInt16 + * + * @description: + * A typedef for a 16bit unsigned integer type. + */ + typedef unsigned short FT_UInt16; + + /* */ + + + /* this #if 0 ... #endif clause is for documentation purposes */ +#if 0 + + /************************************************************************** + * + * @type: + * FT_Int32 + * + * @description: + * A typedef for a 32bit signed integer type. The size depends on the + * configuration. + */ + typedef signed XXX FT_Int32; + + + /************************************************************************** + * + * @type: + * FT_UInt32 + * + * A typedef for a 32bit unsigned integer type. The size depends on the + * configuration. + */ + typedef unsigned XXX FT_UInt32; + + + /************************************************************************** + * + * @type: + * FT_Int64 + * + * A typedef for a 64bit signed integer type. The size depends on the + * configuration. Only defined if there is real 64bit support; + * otherwise, it gets emulated with a structure (if necessary). + */ + typedef signed XXX FT_Int64; + + + /************************************************************************** + * + * @type: + * FT_UInt64 + * + * A typedef for a 64bit unsigned integer type. The size depends on the + * configuration. Only defined if there is real 64bit support; + * otherwise, it gets emulated with a structure (if necessary). + */ + typedef unsigned XXX FT_UInt64; + + /* */ + +#endif + +#if FT_SIZEOF_INT == ( 32 / FT_CHAR_BIT ) + + typedef signed int FT_Int32; + typedef unsigned int FT_UInt32; + +#elif FT_SIZEOF_LONG == ( 32 / FT_CHAR_BIT ) + + typedef signed long FT_Int32; + typedef unsigned long FT_UInt32; + +#else +#error "no 32bit type found -- please check your configuration files" +#endif + + + /* look up an integer type that is at least 32~bits */ +#if FT_SIZEOF_INT >= ( 32 / FT_CHAR_BIT ) + + typedef int FT_Fast; + typedef unsigned int FT_UFast; + +#elif FT_SIZEOF_LONG >= ( 32 / FT_CHAR_BIT ) + + typedef long FT_Fast; + typedef unsigned long FT_UFast; + +#endif + + + /* determine whether we have a 64-bit integer type */ +#if FT_SIZEOF_LONG == ( 64 / FT_CHAR_BIT ) + +#define FT_INT64 long +#define FT_UINT64 unsigned long + +#elif FT_SIZEOF_LONG_LONG >= ( 64 / FT_CHAR_BIT ) + +#define FT_INT64 long long int +#define FT_UINT64 unsigned long long int + + /************************************************************************** + * + * A 64-bit data type may create compilation problems if you compile in + * strict ANSI mode. To avoid them, we disable other 64-bit data types if + * `__STDC__` is defined. You can however ignore this rule by defining the + * `FT_CONFIG_OPTION_FORCE_INT64` configuration macro. + */ +#elif !defined( __STDC__ ) || defined( FT_CONFIG_OPTION_FORCE_INT64 ) + +#if defined( _MSC_VER ) && _MSC_VER >= 900 /* Visual C++ (and Intel C++) */ + + /* this compiler provides the `__int64` type */ +#define FT_INT64 __int64 +#define FT_UINT64 unsigned __int64 + +#elif defined( __BORLANDC__ ) /* Borland C++ */ + + /* XXXX: We should probably check the value of `__BORLANDC__` in order */ + /* to test the compiler version. */ + + /* this compiler provides the `__int64` type */ +#define FT_INT64 __int64 +#define FT_UINT64 unsigned __int64 + +#elif defined( __WATCOMC__ ) && __WATCOMC__ >= 1100 /* Watcom C++ */ + +#define FT_INT64 long long int +#define FT_UINT64 unsigned long long int + +#elif defined( __MWERKS__ ) /* Metrowerks CodeWarrior */ + +#define FT_INT64 long long int +#define FT_UINT64 unsigned long long int + +#elif defined( __GNUC__ ) + + /* GCC provides the `long long` type */ +#define FT_INT64 long long int +#define FT_UINT64 unsigned long long int + +#endif /* !__STDC__ */ + +#endif /* FT_SIZEOF_LONG == (64 / FT_CHAR_BIT) */ + +#ifdef FT_INT64 + + typedef FT_INT64 FT_Int64; + typedef FT_UINT64 FT_UInt64; + +# define FT_INT64_ZERO 0 + +#else /* !FT_INT64 */ + + /* we need to emulate 64-bit data types if none are available */ + + typedef struct FT_Int64_ + { + FT_UInt32 lo; + FT_UInt32 hi; + + } FT_Int64; + + typedef struct FT_UInt64_ + { + FT_UInt32 lo; + FT_UInt32 hi; + + } FT_UInt64; + +# define FT_INT64_ZERO { 0, 0 } + +#endif /* !FT_INT64 */ + +FT_END_HEADER + +#endif /* FREETYPE_CONFIG_INTEGER_TYPES_H_ */ diff --git a/dependencies/linux64/include/freetype2/freetype/config/mac-support.h b/dependencies/linux64/include/freetype2/freetype/config/mac-support.h new file mode 100644 index 0000000..07b6f91 --- /dev/null +++ b/dependencies/linux64/include/freetype2/freetype/config/mac-support.h @@ -0,0 +1,49 @@ +/**************************************************************************** + * + * config/mac-support.h + * + * Mac/OS X support configuration header. + * + * Copyright (C) 1996-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ +#ifndef FREETYPE_CONFIG_MAC_SUPPORT_H_ +#define FREETYPE_CONFIG_MAC_SUPPORT_H_ + + /************************************************************************** + * + * Mac support + * + * This is the only necessary change, so it is defined here instead + * providing a new configuration file. + */ +#if defined( __APPLE__ ) || ( defined( __MWERKS__ ) && defined( macintosh ) ) + /* No Carbon frameworks for 64bit 10.4.x. */ + /* `AvailabilityMacros.h` is available since Mac OS X 10.2, */ + /* so guess the system version by maximum errno before inclusion. */ +#include +#ifdef ECANCELED /* defined since 10.2 */ +#include "AvailabilityMacros.h" +#endif +#if defined( __LP64__ ) && \ + ( MAC_OS_X_VERSION_MIN_REQUIRED <= MAC_OS_X_VERSION_10_4 ) +#undef FT_MACINTOSH +#endif + +#elif defined( __SC__ ) || defined( __MRC__ ) + /* Classic MacOS compilers */ +#include "ConditionalMacros.h" +#if TARGET_OS_MAC +#define FT_MACINTOSH 1 +#endif + +#endif /* Mac support */ + +#endif /* FREETYPE_CONFIG_MAC_SUPPORT_H_ */ diff --git a/dependencies/linux64/include/freetype2/freetype/config/public-macros.h b/dependencies/linux64/include/freetype2/freetype/config/public-macros.h new file mode 100644 index 0000000..4aba639 --- /dev/null +++ b/dependencies/linux64/include/freetype2/freetype/config/public-macros.h @@ -0,0 +1,138 @@ +/**************************************************************************** + * + * config/public-macros.h + * + * Define a set of compiler macros used in public FreeType headers. + * + * Copyright (C) 2020-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + /* + * The definitions in this file are used by the public FreeType headers + * and thus should be considered part of the public API. + * + * Other compiler-specific macro definitions that are not exposed by the + * FreeType API should go into + * `include/freetype/internal/compiler-macros.h` instead. + */ +#ifndef FREETYPE_CONFIG_PUBLIC_MACROS_H_ +#define FREETYPE_CONFIG_PUBLIC_MACROS_H_ + + /* + * `FT_BEGIN_HEADER` and `FT_END_HEADER` might have already been defined + * by `freetype/config/ftheader.h`, but we don't want to include this + * header here, so redefine the macros here only when needed. Their + * definition is very stable, so keeping them in sync with the ones in the + * header should not be a maintenance issue. + */ +#ifndef FT_BEGIN_HEADER +#ifdef __cplusplus +#define FT_BEGIN_HEADER extern "C" { +#else +#define FT_BEGIN_HEADER /* empty */ +#endif +#endif /* FT_BEGIN_HEADER */ + +#ifndef FT_END_HEADER +#ifdef __cplusplus +#define FT_END_HEADER } +#else +#define FT_END_HEADER /* empty */ +#endif +#endif /* FT_END_HEADER */ + + +FT_BEGIN_HEADER + + /* + * Mark a function declaration as public. This ensures it will be + * properly exported to client code. Place this before a function + * declaration. + * + * NOTE: This macro should be considered an internal implementation + * detail, and not part of the FreeType API. It is only defined here + * because it is needed by `FT_EXPORT`. + */ + + /* Visual C, MinGW, Cygwin */ +#if defined( _WIN32 ) || defined( __CYGWIN__ ) + +#if defined( FT2_BUILD_LIBRARY ) && defined( DLL_EXPORT ) +#define FT_PUBLIC_FUNCTION_ATTRIBUTE __declspec( dllexport ) +#elif defined( DLL_IMPORT ) +#define FT_PUBLIC_FUNCTION_ATTRIBUTE __declspec( dllimport ) +#endif + + /* gcc, clang */ +#elif ( defined( __GNUC__ ) && __GNUC__ >= 4 ) || defined( __clang__ ) +#define FT_PUBLIC_FUNCTION_ATTRIBUTE \ + __attribute__(( visibility( "default" ) )) + + /* Sun */ +#elif defined( __SUNPRO_C ) && __SUNPRO_C >= 0x550 +#define FT_PUBLIC_FUNCTION_ATTRIBUTE __global +#endif + + +#ifndef FT_PUBLIC_FUNCTION_ATTRIBUTE +#define FT_PUBLIC_FUNCTION_ATTRIBUTE /* empty */ +#endif + + + /* + * Define a public FreeType API function. This ensures it is properly + * exported or imported at build time. The macro parameter is the + * function's return type as in: + * + * FT_EXPORT( FT_Bool ) + * FT_Object_Method( FT_Object obj, + * ... ); + * + * NOTE: This requires that all `FT_EXPORT` uses are inside + * `FT_BEGIN_HEADER ... FT_END_HEADER` blocks. This guarantees that the + * functions are exported with C linkage, even when the header is included + * by a C++ source file. + */ +#define FT_EXPORT( x ) FT_PUBLIC_FUNCTION_ATTRIBUTE extern x + + + /* + * `FT_UNUSED` indicates that a given parameter is not used -- this is + * only used to get rid of unpleasant compiler warnings. + * + * Technically, this was not meant to be part of the public API, but some + * third-party code depends on it. + */ +#ifndef FT_UNUSED +#define FT_UNUSED( arg ) ( (arg) = (arg) ) +#endif + + + /* + * Support for casts in both C and C++. + */ +#ifdef __cplusplus +#define FT_STATIC_CAST( type, var ) static_cast(var) +#define FT_REINTERPRET_CAST( type, var ) reinterpret_cast(var) + +#define FT_STATIC_BYTE_CAST( type, var ) \ + static_cast( static_cast( var ) ) +#else +#define FT_STATIC_CAST( type, var ) (type)(var) +#define FT_REINTERPRET_CAST( type, var ) (type)(var) + +#define FT_STATIC_BYTE_CAST( type, var ) (type)(unsigned char)(var) +#endif + + +FT_END_HEADER + +#endif /* FREETYPE_CONFIG_PUBLIC_MACROS_H_ */ diff --git a/dependencies/linux64/include/freetype2/freetype/freetype.h b/dependencies/linux64/include/freetype2/freetype/freetype.h new file mode 100644 index 0000000..ea0e080 --- /dev/null +++ b/dependencies/linux64/include/freetype2/freetype/freetype.h @@ -0,0 +1,5293 @@ +/**************************************************************************** + * + * freetype.h + * + * FreeType high-level API and common types (specification only). + * + * Copyright (C) 1996-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + +#ifndef FREETYPE_H_ +#define FREETYPE_H_ + + +#include +#include FT_CONFIG_CONFIG_H +#include +#include + + +FT_BEGIN_HEADER + + + + /************************************************************************** + * + * @section: + * preamble + * + * @title: + * Preamble + * + * @abstract: + * What FreeType is and isn't + * + * @description: + * FreeType is a library that provides access to glyphs in font files. It + * scales the glyph images and their metrics to a requested size, and it + * rasterizes the glyph images to produce pixel or subpixel alpha coverage + * bitmaps. + * + * Note that FreeType is _not_ a text layout engine. You have to use + * higher-level libraries like HarfBuzz, Pango, or ICU for that. + * + * Note also that FreeType does _not_ perform alpha blending or + * compositing the resulting bitmaps or pixmaps by itself. Use your + * favourite graphics library (for example, Cairo or Skia) to further + * process FreeType's output. + * + */ + + + /************************************************************************** + * + * @section: + * header_inclusion + * + * @title: + * FreeType's header inclusion scheme + * + * @abstract: + * How client applications should include FreeType header files. + * + * @description: + * To be as flexible as possible (and for historical reasons), you must + * load file `ft2build.h` first before other header files, for example + * + * ``` + * #include + * + * #include + * #include + * ``` + */ + + + /************************************************************************** + * + * @section: + * user_allocation + * + * @title: + * User allocation + * + * @abstract: + * How client applications should allocate FreeType data structures. + * + * @description: + * FreeType assumes that structures allocated by the user and passed as + * arguments are zeroed out except for the actual data. In other words, + * it is recommended to use `calloc` (or variants of it) instead of + * `malloc` for allocation. + * + */ + + + /************************************************************************** + * + * @section: + * font_testing_macros + * + * @title: + * Font Testing Macros + * + * @abstract: + * Macros to test various properties of fonts. + * + * @description: + * Macros to test the most important font properties. + * + * It is recommended to use these high-level macros instead of directly + * testing the corresponding flags, which are scattered over various + * structures. + * + * @order: + * FT_HAS_HORIZONTAL + * FT_HAS_VERTICAL + * FT_HAS_KERNING + * FT_HAS_FIXED_SIZES + * FT_HAS_GLYPH_NAMES + * FT_HAS_COLOR + * FT_HAS_MULTIPLE_MASTERS + * FT_HAS_SVG + * FT_HAS_SBIX + * FT_HAS_SBIX_OVERLAY + * + * FT_IS_SFNT + * FT_IS_SCALABLE + * FT_IS_FIXED_WIDTH + * FT_IS_CID_KEYED + * FT_IS_TRICKY + * FT_IS_NAMED_INSTANCE + * FT_IS_VARIATION + * + */ + + + /************************************************************************** + * + * @section: + * library_setup + * + * @title: + * Library Setup + * + * @abstract: + * Functions to start and end the usage of the FreeType library. + * + * @description: + * Functions to start and end the usage of the FreeType library. + * + * Note that @FT_Library_Version and @FREETYPE_XXX are of limited use + * because even a new release of FreeType with only documentation + * changes increases the version number. + * + * @order: + * FT_Library + * FT_Init_FreeType + * FT_Done_FreeType + * + * FT_Library_Version + * FREETYPE_XXX + * + */ + + + /************************************************************************** + * + * @section: + * face_creation + * + * @title: + * Face Creation + * + * @abstract: + * Functions to manage fonts. + * + * @description: + * The functions and structures collected in this section operate on + * fonts globally. + * + * @order: + * FT_Face + * FT_FaceRec + * FT_FACE_FLAG_XXX + * FT_STYLE_FLAG_XXX + * + * FT_New_Face + * FT_Done_Face + * FT_Reference_Face + * FT_New_Memory_Face + * FT_Face_Properties + * FT_Open_Face + * FT_Open_Args + * FT_OPEN_XXX + * FT_Parameter + * FT_Attach_File + * FT_Attach_Stream + * + */ + + + /************************************************************************** + * + * @section: + * sizing_and_scaling + * + * @title: + * Sizing and Scaling + * + * @abstract: + * Functions to manage font sizes. + * + * @description: + * The functions and structures collected in this section are related to + * selecting and manipulating the size of a font globally. + * + * @order: + * FT_Size + * FT_SizeRec + * FT_Size_Metrics + * + * FT_Bitmap_Size + * + * FT_Set_Char_Size + * FT_Set_Pixel_Sizes + * FT_Request_Size + * FT_Select_Size + * FT_Size_Request_Type + * FT_Size_RequestRec + * FT_Size_Request + * + * FT_Set_Transform + * FT_Get_Transform + * + */ + + + /************************************************************************** + * + * @section: + * glyph_retrieval + * + * @title: + * Glyph Retrieval + * + * @abstract: + * Functions to manage glyphs. + * + * @description: + * The functions and structures collected in this section operate on + * single glyphs, of which @FT_Load_Glyph is most important. + * + * @order: + * FT_GlyphSlot + * FT_GlyphSlotRec + * FT_Glyph_Metrics + * + * FT_Load_Glyph + * FT_LOAD_XXX + * FT_LOAD_TARGET_MODE + * FT_LOAD_TARGET_XXX + * + * FT_Render_Glyph + * FT_Render_Mode + * FT_Get_Kerning + * FT_Kerning_Mode + * FT_Get_Track_Kerning + * + */ + + + /************************************************************************** + * + * @section: + * character_mapping + * + * @title: + * Character Mapping + * + * @abstract: + * Functions to manage character-to-glyph maps. + * + * @description: + * This section holds functions and structures that are related to + * mapping character input codes to glyph indices. + * + * Note that for many scripts the simplistic approach used by FreeType + * of mapping a single character to a single glyph is not valid or + * possible! In general, a higher-level library like HarfBuzz or ICU + * should be used for handling text strings. + * + * @order: + * FT_CharMap + * FT_CharMapRec + * FT_Encoding + * FT_ENC_TAG + * + * FT_Select_Charmap + * FT_Set_Charmap + * FT_Get_Charmap_Index + * + * FT_Get_Char_Index + * FT_Get_First_Char + * FT_Get_Next_Char + * FT_Load_Char + * + */ + + + /************************************************************************** + * + * @section: + * information_retrieval + * + * @title: + * Information Retrieval + * + * @abstract: + * Functions to retrieve font and glyph information. + * + * @description: + * Functions to retrieve font and glyph information. Only some very + * basic data is covered; see also the chapter on the format-specific + * API for more. + * + * + * @order: + * FT_Get_Name_Index + * FT_Get_Glyph_Name + * FT_Get_Postscript_Name + * FT_Get_FSType_Flags + * FT_FSTYPE_XXX + * FT_Get_SubGlyph_Info + * FT_SUBGLYPH_FLAG_XXX + * + */ + + + /************************************************************************** + * + * @section: + * other_api_data + * + * @title: + * Other API Data + * + * @abstract: + * Other structures, enumerations, and macros. + * + * @description: + * Other structures, enumerations, and macros. Deprecated functions are + * also listed here. + * + * @order: + * FT_Face_Internal + * FT_Size_Internal + * FT_Slot_Internal + * + * FT_SubGlyph + * + * FT_HAS_FAST_GLYPHS + * FT_Face_CheckTrueTypePatents + * FT_Face_SetUnpatentedHinting + * + */ + + + /*************************************************************************/ + /*************************************************************************/ + /* */ + /* B A S I C T Y P E S */ + /* */ + /*************************************************************************/ + /*************************************************************************/ + + + /************************************************************************** + * + * @section: + * glyph_retrieval + * + */ + + /************************************************************************** + * + * @struct: + * FT_Glyph_Metrics + * + * @description: + * A structure to model the metrics of a single glyph. The values are + * expressed in 26.6 fractional pixel format; if the flag + * @FT_LOAD_NO_SCALE has been used while loading the glyph, values are + * expressed in font units instead. + * + * @fields: + * width :: + * The glyph's width. + * + * height :: + * The glyph's height. + * + * horiBearingX :: + * Left side bearing for horizontal layout. + * + * horiBearingY :: + * Top side bearing for horizontal layout. + * + * horiAdvance :: + * Advance width for horizontal layout. + * + * vertBearingX :: + * Left side bearing for vertical layout. + * + * vertBearingY :: + * Top side bearing for vertical layout. Larger positive values mean + * further below the vertical glyph origin. + * + * vertAdvance :: + * Advance height for vertical layout. Positive values mean the glyph + * has a positive advance downward. + * + * @note: + * If not disabled with @FT_LOAD_NO_HINTING, the values represent + * dimensions of the hinted glyph (in case hinting is applicable). + * + * Stroking a glyph with an outside border does not increase + * `horiAdvance` or `vertAdvance`; you have to manually adjust these + * values to account for the added width and height. + * + * FreeType doesn't use the 'VORG' table data for CFF fonts because it + * doesn't have an interface to quickly retrieve the glyph height. The + * y~coordinate of the vertical origin can be simply computed as + * `vertBearingY + height` after loading a glyph. + */ + typedef struct FT_Glyph_Metrics_ + { + FT_Pos width; + FT_Pos height; + + FT_Pos horiBearingX; + FT_Pos horiBearingY; + FT_Pos horiAdvance; + + FT_Pos vertBearingX; + FT_Pos vertBearingY; + FT_Pos vertAdvance; + + } FT_Glyph_Metrics; + + + /************************************************************************** + * + * @section: + * sizing_and_scaling + * + */ + + /************************************************************************** + * + * @struct: + * FT_Bitmap_Size + * + * @description: + * This structure models the metrics of a bitmap strike (i.e., a set of + * glyphs for a given point size and resolution) in a bitmap font. It is + * used for the `available_sizes` field of @FT_Face. + * + * @fields: + * height :: + * The vertical distance, in pixels, between two consecutive baselines. + * It is always positive. + * + * width :: + * The average width, in pixels, of all glyphs in the strike. + * + * size :: + * The nominal size of the strike in 26.6 fractional points. This + * field is not very useful. + * + * x_ppem :: + * The horizontal ppem (nominal width) in 26.6 fractional pixels. + * + * y_ppem :: + * The vertical ppem (nominal height) in 26.6 fractional pixels. + * + * @note: + * Windows FNT: + * The nominal size given in a FNT font is not reliable. If the driver + * finds it incorrect, it sets `size` to some calculated values, and + * `x_ppem` and `y_ppem` to the pixel width and height given in the + * font, respectively. + * + * TrueType embedded bitmaps: + * `size`, `width`, and `height` values are not contained in the bitmap + * strike itself. They are computed from the global font parameters. + */ + typedef struct FT_Bitmap_Size_ + { + FT_Short height; + FT_Short width; + + FT_Pos size; + + FT_Pos x_ppem; + FT_Pos y_ppem; + + } FT_Bitmap_Size; + + + /*************************************************************************/ + /*************************************************************************/ + /* */ + /* O B J E C T C L A S S E S */ + /* */ + /*************************************************************************/ + /*************************************************************************/ + + /************************************************************************** + * + * @section: + * library_setup + * + */ + + /************************************************************************** + * + * @type: + * FT_Library + * + * @description: + * A handle to a FreeType library instance. Each 'library' is completely + * independent from the others; it is the 'root' of a set of objects like + * fonts, faces, sizes, etc. + * + * It also embeds a memory manager (see @FT_Memory), as well as a + * scan-line converter object (see @FT_Raster). + * + * [Since 2.5.6] In multi-threaded applications it is easiest to use one + * `FT_Library` object per thread. In case this is too cumbersome, a + * single `FT_Library` object across threads is possible also, as long as + * a mutex lock is used around @FT_New_Face and @FT_Done_Face. + * + * @note: + * Library objects are normally created by @FT_Init_FreeType, and + * destroyed with @FT_Done_FreeType. If you need reference-counting + * (cf. @FT_Reference_Library), use @FT_New_Library and @FT_Done_Library. + */ + typedef struct FT_LibraryRec_ *FT_Library; + + + /************************************************************************** + * + * @section: + * module_management + * + */ + + /************************************************************************** + * + * @type: + * FT_Module + * + * @description: + * A handle to a given FreeType module object. A module can be a font + * driver, a renderer, or anything else that provides services to the + * former. + */ + typedef struct FT_ModuleRec_* FT_Module; + + + /************************************************************************** + * + * @type: + * FT_Driver + * + * @description: + * A handle to a given FreeType font driver object. A font driver is a + * module capable of creating faces from font files. + */ + typedef struct FT_DriverRec_* FT_Driver; + + + /************************************************************************** + * + * @type: + * FT_Renderer + * + * @description: + * A handle to a given FreeType renderer. A renderer is a module in + * charge of converting a glyph's outline image to a bitmap. It supports + * a single glyph image format, and one or more target surface depths. + */ + typedef struct FT_RendererRec_* FT_Renderer; + + + /************************************************************************** + * + * @section: + * face_creation + * + */ + + /************************************************************************** + * + * @type: + * FT_Face + * + * @description: + * A handle to a typographic face object. A face object models a given + * typeface, in a given style. + * + * @note: + * A face object also owns a single @FT_GlyphSlot object, as well as one + * or more @FT_Size objects. + * + * Use @FT_New_Face or @FT_Open_Face to create a new face object from a + * given filepath or a custom input stream. + * + * Use @FT_Done_Face to destroy it (along with its slot and sizes). + * + * An `FT_Face` object can only be safely used from one thread at a time. + * Similarly, creation and destruction of `FT_Face` with the same + * @FT_Library object can only be done from one thread at a time. On the + * other hand, functions like @FT_Load_Glyph and its siblings are + * thread-safe and do not need the lock to be held as long as the same + * `FT_Face` object is not used from multiple threads at the same time. + * + * @also: + * See @FT_FaceRec for the publicly accessible fields of a given face + * object. + */ + typedef struct FT_FaceRec_* FT_Face; + + + /************************************************************************** + * + * @section: + * sizing_and_scaling + * + */ + + /************************************************************************** + * + * @type: + * FT_Size + * + * @description: + * A handle to an object that models a face scaled to a given character + * size. + * + * @note: + * An @FT_Face has one _active_ `FT_Size` object that is used by + * functions like @FT_Load_Glyph to determine the scaling transformation + * that in turn is used to load and hint glyphs and metrics. + * + * A newly created `FT_Size` object contains only meaningless zero values. + * You must use @FT_Set_Char_Size, @FT_Set_Pixel_Sizes, @FT_Request_Size + * or even @FT_Select_Size to change the content (i.e., the scaling + * values) of the active `FT_Size`. Otherwise, the scaling and hinting + * will not be performed. + * + * You can use @FT_New_Size to create additional size objects for a given + * @FT_Face, but they won't be used by other functions until you activate + * it through @FT_Activate_Size. Only one size can be activated at any + * given time per face. + * + * @also: + * See @FT_SizeRec for the publicly accessible fields of a given size + * object. + */ + typedef struct FT_SizeRec_* FT_Size; + + + /************************************************************************** + * + * @section: + * glyph_retrieval + * + */ + + /************************************************************************** + * + * @type: + * FT_GlyphSlot + * + * @description: + * A handle to a given 'glyph slot'. A slot is a container that can hold + * any of the glyphs contained in its parent face. + * + * In other words, each time you call @FT_Load_Glyph or @FT_Load_Char, + * the slot's content is erased by the new glyph data, i.e., the glyph's + * metrics, its image (bitmap or outline), and other control information. + * + * @also: + * See @FT_GlyphSlotRec for the publicly accessible glyph fields. + */ + typedef struct FT_GlyphSlotRec_* FT_GlyphSlot; + + + /************************************************************************** + * + * @section: + * character_mapping + * + */ + + /************************************************************************** + * + * @type: + * FT_CharMap + * + * @description: + * A handle to a character map (usually abbreviated to 'charmap'). A + * charmap is used to translate character codes in a given encoding into + * glyph indexes for its parent's face. Some font formats may provide + * several charmaps per font. + * + * Each face object owns zero or more charmaps, but only one of them can + * be 'active', providing the data used by @FT_Get_Char_Index or + * @FT_Load_Char. + * + * The list of available charmaps in a face is available through the + * `face->num_charmaps` and `face->charmaps` fields of @FT_FaceRec. + * + * The currently active charmap is available as `face->charmap`. You + * should call @FT_Set_Charmap to change it. + * + * @note: + * When a new face is created (either through @FT_New_Face or + * @FT_Open_Face), the library looks for a Unicode charmap within the + * list and automatically activates it. If there is no Unicode charmap, + * FreeType doesn't set an 'active' charmap. + * + * @also: + * See @FT_CharMapRec for the publicly accessible fields of a given + * character map. + */ + typedef struct FT_CharMapRec_* FT_CharMap; + + + /************************************************************************** + * + * @macro: + * FT_ENC_TAG + * + * @description: + * This macro converts four-letter tags into an unsigned long. It is + * used to define 'encoding' identifiers (see @FT_Encoding). + * + * @note: + * Since many 16-bit compilers don't like 32-bit enumerations, you should + * redefine this macro in case of problems to something like this: + * + * ``` + * #define FT_ENC_TAG( value, a, b, c, d ) value + * ``` + * + * to get a simple enumeration without assigning special numbers. + */ + +#ifndef FT_ENC_TAG + +#define FT_ENC_TAG( value, a, b, c, d ) \ + value = ( ( FT_STATIC_BYTE_CAST( FT_UInt32, a ) << 24 ) | \ + ( FT_STATIC_BYTE_CAST( FT_UInt32, b ) << 16 ) | \ + ( FT_STATIC_BYTE_CAST( FT_UInt32, c ) << 8 ) | \ + FT_STATIC_BYTE_CAST( FT_UInt32, d ) ) + +#endif /* FT_ENC_TAG */ + + + /************************************************************************** + * + * @enum: + * FT_Encoding + * + * @description: + * An enumeration to specify character sets supported by charmaps. Used + * in the @FT_Select_Charmap API function. + * + * @note: + * Despite the name, this enumeration lists specific character + * repertoires (i.e., charsets), and not text encoding methods (e.g., + * UTF-8, UTF-16, etc.). + * + * Other encodings might be defined in the future. + * + * @values: + * FT_ENCODING_NONE :: + * The encoding value~0 is reserved for all formats except BDF, PCF, + * and Windows FNT; see below for more information. + * + * FT_ENCODING_UNICODE :: + * The Unicode character set. This value covers all versions of the + * Unicode repertoire, including ASCII and Latin-1. Most fonts include + * a Unicode charmap, but not all of them. + * + * For example, if you want to access Unicode value U+1F028 (and the + * font contains it), use value 0x1F028 as the input value for + * @FT_Get_Char_Index. + * + * FT_ENCODING_MS_SYMBOL :: + * Microsoft Symbol encoding, used to encode mathematical symbols and + * wingdings. For more information, see + * 'https://learn.microsoft.com/typography/opentype/spec/recom#non-standard-symbol-fonts', + * 'http://www.kostis.net/charsets/symbol.htm', and + * 'http://www.kostis.net/charsets/wingding.htm'. + * + * This encoding uses character codes from the PUA (Private Unicode + * Area) in the range U+F020-U+F0FF. + * + * FT_ENCODING_SJIS :: + * Shift JIS encoding for Japanese. More info at + * 'https://en.wikipedia.org/wiki/Shift_JIS'. See note on multi-byte + * encodings below. + * + * FT_ENCODING_PRC :: + * Corresponds to encoding systems mainly for Simplified Chinese as + * used in People's Republic of China (PRC). The encoding layout is + * based on GB~2312 and its supersets GBK and GB~18030. + * + * FT_ENCODING_BIG5 :: + * Corresponds to an encoding system for Traditional Chinese as used in + * Taiwan and Hong Kong. + * + * FT_ENCODING_WANSUNG :: + * Corresponds to the Korean encoding system known as Extended Wansung + * (MS Windows code page 949). For more information see + * 'https://www.unicode.org/Public/MAPPINGS/VENDORS/MICSFT/WindowsBestFit/bestfit949.txt'. + * + * FT_ENCODING_JOHAB :: + * The Korean standard character set (KS~C 5601-1992), which + * corresponds to MS Windows code page 1361. This character set + * includes all possible Hangul character combinations. + * + * FT_ENCODING_ADOBE_LATIN_1 :: + * Corresponds to a Latin-1 encoding as defined in a Type~1 PostScript + * font. It is limited to 256 character codes. + * + * FT_ENCODING_ADOBE_STANDARD :: + * Adobe Standard encoding, as found in Type~1, CFF, and OpenType/CFF + * fonts. It is limited to 256 character codes. + * + * FT_ENCODING_ADOBE_EXPERT :: + * Adobe Expert encoding, as found in Type~1, CFF, and OpenType/CFF + * fonts. It is limited to 256 character codes. + * + * FT_ENCODING_ADOBE_CUSTOM :: + * Corresponds to a custom encoding, as found in Type~1, CFF, and + * OpenType/CFF fonts. It is limited to 256 character codes. + * + * FT_ENCODING_APPLE_ROMAN :: + * Apple roman encoding. Many TrueType and OpenType fonts contain a + * charmap for this 8-bit encoding, since older versions of Mac OS are + * able to use it. + * + * FT_ENCODING_OLD_LATIN_2 :: + * This value is deprecated and was neither used nor reported by + * FreeType. Don't use or test for it. + * + * FT_ENCODING_MS_SJIS :: + * Same as FT_ENCODING_SJIS. Deprecated. + * + * FT_ENCODING_MS_GB2312 :: + * Same as FT_ENCODING_PRC. Deprecated. + * + * FT_ENCODING_MS_BIG5 :: + * Same as FT_ENCODING_BIG5. Deprecated. + * + * FT_ENCODING_MS_WANSUNG :: + * Same as FT_ENCODING_WANSUNG. Deprecated. + * + * FT_ENCODING_MS_JOHAB :: + * Same as FT_ENCODING_JOHAB. Deprecated. + * + * @note: + * When loading a font, FreeType makes a Unicode charmap active if + * possible (either if the font provides such a charmap, or if FreeType + * can synthesize one from PostScript glyph name dictionaries; in either + * case, the charmap is tagged with `FT_ENCODING_UNICODE`). If such a + * charmap is synthesized, it is placed at the first position of the + * charmap array. + * + * All other encodings are considered legacy and tagged only if + * explicitly defined in the font file. Otherwise, `FT_ENCODING_NONE` is + * used. + * + * `FT_ENCODING_NONE` is set by the BDF and PCF drivers if the charmap is + * neither Unicode nor ISO-8859-1 (otherwise it is set to + * `FT_ENCODING_UNICODE`). Use @FT_Get_BDF_Charset_ID to find out which + * encoding is really present. If, for example, the `cs_registry` field + * is 'KOI8' and the `cs_encoding` field is 'R', the font is encoded in + * KOI8-R. + * + * `FT_ENCODING_NONE` is always set (with a single exception) by the + * winfonts driver. Use @FT_Get_WinFNT_Header and examine the `charset` + * field of the @FT_WinFNT_HeaderRec structure to find out which encoding + * is really present. For example, @FT_WinFNT_ID_CP1251 (204) means + * Windows code page 1251 (for Russian). + * + * `FT_ENCODING_NONE` is set if `platform_id` is @TT_PLATFORM_MACINTOSH + * and `encoding_id` is not `TT_MAC_ID_ROMAN` (otherwise it is set to + * `FT_ENCODING_APPLE_ROMAN`). + * + * If `platform_id` is @TT_PLATFORM_MACINTOSH, use the function + * @FT_Get_CMap_Language_ID to query the Mac language ID that may be + * needed to be able to distinguish Apple encoding variants. See + * + * https://www.unicode.org/Public/MAPPINGS/VENDORS/APPLE/Readme.txt + * + * to get an idea how to do that. Basically, if the language ID is~0, + * don't use it, otherwise subtract 1 from the language ID. Then examine + * `encoding_id`. If, for example, `encoding_id` is `TT_MAC_ID_ROMAN` + * and the language ID (minus~1) is `TT_MAC_LANGID_GREEK`, it is the + * Greek encoding, not Roman. `TT_MAC_ID_ARABIC` with + * `TT_MAC_LANGID_FARSI` means the Farsi variant of the Arabic encoding. + */ + typedef enum FT_Encoding_ + { + FT_ENC_TAG( FT_ENCODING_NONE, 0, 0, 0, 0 ), + + FT_ENC_TAG( FT_ENCODING_MS_SYMBOL, 's', 'y', 'm', 'b' ), + FT_ENC_TAG( FT_ENCODING_UNICODE, 'u', 'n', 'i', 'c' ), + + FT_ENC_TAG( FT_ENCODING_SJIS, 's', 'j', 'i', 's' ), + FT_ENC_TAG( FT_ENCODING_PRC, 'g', 'b', ' ', ' ' ), + FT_ENC_TAG( FT_ENCODING_BIG5, 'b', 'i', 'g', '5' ), + FT_ENC_TAG( FT_ENCODING_WANSUNG, 'w', 'a', 'n', 's' ), + FT_ENC_TAG( FT_ENCODING_JOHAB, 'j', 'o', 'h', 'a' ), + + /* for backward compatibility */ + FT_ENCODING_GB2312 = FT_ENCODING_PRC, + FT_ENCODING_MS_SJIS = FT_ENCODING_SJIS, + FT_ENCODING_MS_GB2312 = FT_ENCODING_PRC, + FT_ENCODING_MS_BIG5 = FT_ENCODING_BIG5, + FT_ENCODING_MS_WANSUNG = FT_ENCODING_WANSUNG, + FT_ENCODING_MS_JOHAB = FT_ENCODING_JOHAB, + + FT_ENC_TAG( FT_ENCODING_ADOBE_STANDARD, 'A', 'D', 'O', 'B' ), + FT_ENC_TAG( FT_ENCODING_ADOBE_EXPERT, 'A', 'D', 'B', 'E' ), + FT_ENC_TAG( FT_ENCODING_ADOBE_CUSTOM, 'A', 'D', 'B', 'C' ), + FT_ENC_TAG( FT_ENCODING_ADOBE_LATIN_1, 'l', 'a', 't', '1' ), + + FT_ENC_TAG( FT_ENCODING_OLD_LATIN_2, 'l', 'a', 't', '2' ), + + FT_ENC_TAG( FT_ENCODING_APPLE_ROMAN, 'a', 'r', 'm', 'n' ) + + } FT_Encoding; + + + /* these constants are deprecated; use the corresponding `FT_Encoding` */ + /* values instead */ +#define ft_encoding_none FT_ENCODING_NONE +#define ft_encoding_unicode FT_ENCODING_UNICODE +#define ft_encoding_symbol FT_ENCODING_MS_SYMBOL +#define ft_encoding_latin_1 FT_ENCODING_ADOBE_LATIN_1 +#define ft_encoding_latin_2 FT_ENCODING_OLD_LATIN_2 +#define ft_encoding_sjis FT_ENCODING_SJIS +#define ft_encoding_gb2312 FT_ENCODING_PRC +#define ft_encoding_big5 FT_ENCODING_BIG5 +#define ft_encoding_wansung FT_ENCODING_WANSUNG +#define ft_encoding_johab FT_ENCODING_JOHAB + +#define ft_encoding_adobe_standard FT_ENCODING_ADOBE_STANDARD +#define ft_encoding_adobe_expert FT_ENCODING_ADOBE_EXPERT +#define ft_encoding_adobe_custom FT_ENCODING_ADOBE_CUSTOM +#define ft_encoding_apple_roman FT_ENCODING_APPLE_ROMAN + + + /************************************************************************** + * + * @struct: + * FT_CharMapRec + * + * @description: + * The base charmap structure. + * + * @fields: + * face :: + * A handle to the parent face object. + * + * encoding :: + * An @FT_Encoding tag identifying the charmap. Use this with + * @FT_Select_Charmap. + * + * platform_id :: + * An ID number describing the platform for the following encoding ID. + * This comes directly from the TrueType specification and gets + * emulated for other formats. + * + * encoding_id :: + * A platform-specific encoding number. This also comes from the + * TrueType specification and gets emulated similarly. + */ + typedef struct FT_CharMapRec_ + { + FT_Face face; + FT_Encoding encoding; + FT_UShort platform_id; + FT_UShort encoding_id; + + } FT_CharMapRec; + + + /*************************************************************************/ + /*************************************************************************/ + /* */ + /* B A S E O B J E C T C L A S S E S */ + /* */ + /*************************************************************************/ + /*************************************************************************/ + + + /************************************************************************** + * + * @section: + * other_api_data + * + */ + + /************************************************************************** + * + * @type: + * FT_Face_Internal + * + * @description: + * An opaque handle to an `FT_Face_InternalRec` structure that models the + * private data of a given @FT_Face object. + * + * This structure might change between releases of FreeType~2 and is not + * generally available to client applications. + */ + typedef struct FT_Face_InternalRec_* FT_Face_Internal; + + + /************************************************************************** + * + * @section: + * face_creation + * + */ + + /************************************************************************** + * + * @struct: + * FT_FaceRec + * + * @description: + * FreeType root face class structure. A face object models a typeface + * in a font file. + * + * @fields: + * num_faces :: + * The number of faces in the font file. Some font formats can have + * multiple faces in a single font file. + * + * face_index :: + * This field holds two different values. Bits 0-15 are the index of + * the face in the font file (starting with value~0). They are set + * to~0 if there is only one face in the font file. + * + * [Since 2.6.1] Bits 16-30 are relevant to GX and OpenType variation + * fonts only, holding the named instance index for the current face + * index (starting with value~1; value~0 indicates font access without + * a named instance). For non-variation fonts, bits 16-30 are ignored. + * If we have the third named instance of face~4, say, `face_index` is + * set to 0x00030004. + * + * Bit 31 is always zero (that is, `face_index` is always a positive + * value). + * + * [Since 2.9] Changing the design coordinates with + * @FT_Set_Var_Design_Coordinates or @FT_Set_Var_Blend_Coordinates does + * not influence the named instance index value (only + * @FT_Set_Named_Instance does that). + * + * face_flags :: + * A set of bit flags that give important information about the face; + * see @FT_FACE_FLAG_XXX for the details. + * + * style_flags :: + * The lower 16~bits contain a set of bit flags indicating the style of + * the face; see @FT_STYLE_FLAG_XXX for the details. + * + * [Since 2.6.1] Bits 16-30 hold the number of named instances + * available for the current face if we have a GX or OpenType variation + * (sub)font. Bit 31 is always zero (that is, `style_flags` is always + * a positive value). Note that a variation font has always at least + * one named instance, namely the default instance. + * + * num_glyphs :: + * The number of glyphs in the face. If the face is scalable and has + * sbits (see `num_fixed_sizes`), it is set to the number of outline + * glyphs. + * + * For CID-keyed fonts (not in an SFNT wrapper) this value gives the + * highest CID used in the font. + * + * family_name :: + * The face's family name. This is an ASCII string, usually in + * English, that describes the typeface's family (like 'Times New + * Roman', 'Bodoni', 'Garamond', etc). This is a least common + * denominator used to list fonts. Some formats (TrueType & OpenType) + * provide localized and Unicode versions of this string. Applications + * should use the format-specific interface to access them. Can be + * `NULL` (e.g., in fonts embedded in a PDF file). + * + * In case the font doesn't provide a specific family name entry, + * FreeType tries to synthesize one, deriving it from other name + * entries. + * + * style_name :: + * The face's style name. This is an ASCII string, usually in English, + * that describes the typeface's style (like 'Italic', 'Bold', + * 'Condensed', etc). Not all font formats provide a style name, so + * this field is optional, and can be set to `NULL`. As for + * `family_name`, some formats provide localized and Unicode versions + * of this string. Applications should use the format-specific + * interface to access them. + * + * num_fixed_sizes :: + * The number of bitmap strikes in the face. Even if the face is + * scalable, there might still be bitmap strikes, which are called + * 'sbits' in that case. + * + * available_sizes :: + * An array of @FT_Bitmap_Size for all bitmap strikes in the face. It + * is set to `NULL` if there is no bitmap strike. + * + * Note that FreeType tries to sanitize the strike data since they are + * sometimes sloppy or incorrect, but this can easily fail. + * + * num_charmaps :: + * The number of charmaps in the face. + * + * charmaps :: + * An array of the charmaps of the face. + * + * generic :: + * A field reserved for client uses. See the @FT_Generic type + * description. + * + * bbox :: + * The font bounding box. Coordinates are expressed in font units (see + * `units_per_EM`). The box is large enough to contain any glyph from + * the font. Thus, `bbox.yMax` can be seen as the 'maximum ascender', + * and `bbox.yMin` as the 'minimum descender'. Only relevant for + * scalable formats. + * + * Note that the bounding box might be off by (at least) one pixel for + * hinted fonts. See @FT_Size_Metrics for further discussion. + * + * Note that the bounding box does not vary in OpenType variation fonts + * and should only be used in relation to the default instance. + * + * units_per_EM :: + * The number of font units per EM square for this face. This is + * typically 2048 for TrueType fonts, and 1000 for Type~1 fonts. Only + * relevant for scalable formats. + * + * ascender :: + * The typographic ascender of the face, expressed in font units. For + * font formats not having this information, it is set to `bbox.yMax`. + * Only relevant for scalable formats. + * + * descender :: + * The typographic descender of the face, expressed in font units. For + * font formats not having this information, it is set to `bbox.yMin`. + * Note that this field is negative for values below the baseline. + * Only relevant for scalable formats. + * + * height :: + * This value is the vertical distance between two consecutive + * baselines, expressed in font units. It is always positive. Only + * relevant for scalable formats. + * + * If you want the global glyph height, use `ascender - descender`. + * + * max_advance_width :: + * The maximum advance width, in font units, for all glyphs in this + * face. This can be used to make word wrapping computations faster. + * Only relevant for scalable formats. + * + * max_advance_height :: + * The maximum advance height, in font units, for all glyphs in this + * face. This is only relevant for vertical layouts, and is set to + * `height` for fonts that do not provide vertical metrics. Only + * relevant for scalable formats. + * + * underline_position :: + * The position, in font units, of the underline line for this face. + * It is the center of the underlining stem. Only relevant for + * scalable formats. + * + * underline_thickness :: + * The thickness, in font units, of the underline for this face. Only + * relevant for scalable formats. + * + * glyph :: + * The face's associated glyph slot(s). + * + * size :: + * The current active size for this face. + * + * charmap :: + * The current active charmap for this face. + * + * @note: + * Fields may be changed after a call to @FT_Attach_File or + * @FT_Attach_Stream. + * + * For an OpenType variation font, the values of the following fields can + * change after a call to @FT_Set_Var_Design_Coordinates (and friends) if + * the font contains an 'MVAR' table: `ascender`, `descender`, `height`, + * `underline_position`, and `underline_thickness`. + * + * Especially for TrueType fonts see also the documentation for + * @FT_Size_Metrics. + */ + typedef struct FT_FaceRec_ + { + FT_Long num_faces; + FT_Long face_index; + + FT_Long face_flags; + FT_Long style_flags; + + FT_Long num_glyphs; + + FT_String* family_name; + FT_String* style_name; + + FT_Int num_fixed_sizes; + FT_Bitmap_Size* available_sizes; + + FT_Int num_charmaps; + FT_CharMap* charmaps; + + FT_Generic generic; + + /* The following member variables (down to `underline_thickness`) */ + /* are only relevant to scalable outlines; cf. @FT_Bitmap_Size */ + /* for bitmap fonts. */ + FT_BBox bbox; + + FT_UShort units_per_EM; + FT_Short ascender; + FT_Short descender; + FT_Short height; + + FT_Short max_advance_width; + FT_Short max_advance_height; + + FT_Short underline_position; + FT_Short underline_thickness; + + FT_GlyphSlot glyph; + FT_Size size; + FT_CharMap charmap; + + /* private fields, internal to FreeType */ + + FT_Driver driver; + FT_Memory memory; + FT_Stream stream; + + FT_ListRec sizes_list; + + FT_Generic autohint; /* face-specific auto-hinter data */ + void* extensions; /* unused */ + + FT_Face_Internal internal; + + } FT_FaceRec; + + + /************************************************************************** + * + * @enum: + * FT_FACE_FLAG_XXX + * + * @description: + * A list of bit flags used in the `face_flags` field of the @FT_FaceRec + * structure. They inform client applications of properties of the + * corresponding face. + * + * @values: + * FT_FACE_FLAG_SCALABLE :: + * The face contains outline glyphs. Note that a face can contain + * bitmap strikes also, i.e., a face can have both this flag and + * @FT_FACE_FLAG_FIXED_SIZES set. + * + * FT_FACE_FLAG_FIXED_SIZES :: + * The face contains bitmap strikes. See also the `num_fixed_sizes` + * and `available_sizes` fields of @FT_FaceRec. + * + * FT_FACE_FLAG_FIXED_WIDTH :: + * The face contains fixed-width characters (like Courier, Lucida, + * MonoType, etc.). + * + * FT_FACE_FLAG_SFNT :: + * The face uses the SFNT storage scheme. For now, this means TrueType + * and OpenType. + * + * FT_FACE_FLAG_HORIZONTAL :: + * The face contains horizontal glyph metrics. This should be set for + * all common formats. + * + * FT_FACE_FLAG_VERTICAL :: + * The face contains vertical glyph metrics. This is only available in + * some formats, not all of them. + * + * FT_FACE_FLAG_KERNING :: + * The face contains kerning information. If set, the kerning distance + * can be retrieved using the function @FT_Get_Kerning. Otherwise the + * function always returns the vector (0,0). + * + * Note that for TrueType fonts only, FreeType supports both the 'kern' + * table and the basic, pair-wise kerning feature from the 'GPOS' table + * (with `TT_CONFIG_OPTION_GPOS_KERNING` enabled), though FreeType does + * not support the more advanced GPOS layout features; use a library + * like HarfBuzz for those instead. + * + * FT_FACE_FLAG_FAST_GLYPHS :: + * THIS FLAG IS DEPRECATED. DO NOT USE OR TEST IT. + * + * FT_FACE_FLAG_MULTIPLE_MASTERS :: + * The face contains multiple masters and is capable of interpolating + * between them. Supported formats are Adobe MM, TrueType GX, and + * OpenType variation fonts. + * + * See section @multiple_masters for API details. + * + * FT_FACE_FLAG_GLYPH_NAMES :: + * The face contains glyph names, which can be retrieved using + * @FT_Get_Glyph_Name. Note that some TrueType fonts contain broken + * glyph name tables. Use the function @FT_Has_PS_Glyph_Names when + * needed. + * + * FT_FACE_FLAG_EXTERNAL_STREAM :: + * Used internally by FreeType to indicate that a face's stream was + * provided by the client application and should not be destroyed when + * @FT_Done_Face is called. Don't read or test this flag. + * + * FT_FACE_FLAG_HINTER :: + * The font driver has a hinting machine of its own. For example, with + * TrueType fonts, it makes sense to use data from the SFNT 'gasp' + * table only if the native TrueType hinting engine (with the bytecode + * interpreter) is available and active. + * + * FT_FACE_FLAG_CID_KEYED :: + * The face is CID-keyed. In that case, the face is not accessed by + * glyph indices but by CID values. For subsetted CID-keyed fonts this + * has the consequence that not all index values are a valid argument + * to @FT_Load_Glyph. Only the CID values for which corresponding + * glyphs in the subsetted font exist make `FT_Load_Glyph` return + * successfully; in all other cases you get an + * `FT_Err_Invalid_Argument` error. + * + * Note that CID-keyed fonts that are in an SFNT wrapper (that is, all + * OpenType/CFF fonts) don't have this flag set since the glyphs are + * accessed in the normal way (using contiguous indices); the + * 'CID-ness' isn't visible to the application. + * + * FT_FACE_FLAG_TRICKY :: + * The face is 'tricky', that is, it always needs the font format's + * native hinting engine to get a reasonable result. A typical example + * is the old Chinese font `mingli.ttf` (but not `mingliu.ttc`) that + * uses TrueType bytecode instructions to move and scale all of its + * subglyphs. + * + * It is not possible to auto-hint such fonts using + * @FT_LOAD_FORCE_AUTOHINT; it will also ignore @FT_LOAD_NO_HINTING. + * You have to set both @FT_LOAD_NO_HINTING and @FT_LOAD_NO_AUTOHINT to + * really disable hinting; however, you probably never want this except + * for demonstration purposes. + * + * Currently, there are about a dozen TrueType fonts in the list of + * tricky fonts; they are hard-coded in file `ttobjs.c`. + * + * FT_FACE_FLAG_COLOR :: + * [Since 2.5.1] The face has color glyph tables. See @FT_LOAD_COLOR + * for more information. + * + * FT_FACE_FLAG_VARIATION :: + * [Since 2.9] Set if the current face (or named instance) has been + * altered with @FT_Set_MM_Design_Coordinates, + * @FT_Set_Var_Design_Coordinates, @FT_Set_Var_Blend_Coordinates, or + * @FT_Set_MM_WeightVector to select a non-default instance. + * + * FT_FACE_FLAG_SVG :: + * [Since 2.12] The face has an 'SVG~' OpenType table. + * + * FT_FACE_FLAG_SBIX :: + * [Since 2.12] The face has an 'sbix' OpenType table *and* outlines. + * For such fonts, @FT_FACE_FLAG_SCALABLE is not set by default to + * retain backward compatibility. + * + * FT_FACE_FLAG_SBIX_OVERLAY :: + * [Since 2.12] The face has an 'sbix' OpenType table where outlines + * should be drawn on top of bitmap strikes. + * + */ +#define FT_FACE_FLAG_SCALABLE ( 1L << 0 ) +#define FT_FACE_FLAG_FIXED_SIZES ( 1L << 1 ) +#define FT_FACE_FLAG_FIXED_WIDTH ( 1L << 2 ) +#define FT_FACE_FLAG_SFNT ( 1L << 3 ) +#define FT_FACE_FLAG_HORIZONTAL ( 1L << 4 ) +#define FT_FACE_FLAG_VERTICAL ( 1L << 5 ) +#define FT_FACE_FLAG_KERNING ( 1L << 6 ) +#define FT_FACE_FLAG_FAST_GLYPHS ( 1L << 7 ) +#define FT_FACE_FLAG_MULTIPLE_MASTERS ( 1L << 8 ) +#define FT_FACE_FLAG_GLYPH_NAMES ( 1L << 9 ) +#define FT_FACE_FLAG_EXTERNAL_STREAM ( 1L << 10 ) +#define FT_FACE_FLAG_HINTER ( 1L << 11 ) +#define FT_FACE_FLAG_CID_KEYED ( 1L << 12 ) +#define FT_FACE_FLAG_TRICKY ( 1L << 13 ) +#define FT_FACE_FLAG_COLOR ( 1L << 14 ) +#define FT_FACE_FLAG_VARIATION ( 1L << 15 ) +#define FT_FACE_FLAG_SVG ( 1L << 16 ) +#define FT_FACE_FLAG_SBIX ( 1L << 17 ) +#define FT_FACE_FLAG_SBIX_OVERLAY ( 1L << 18 ) + + + /************************************************************************** + * + * @section: + * font_testing_macros + * + */ + + /************************************************************************** + * + * @macro: + * FT_HAS_HORIZONTAL + * + * @description: + * A macro that returns true whenever a face object contains horizontal + * metrics (this is true for all font formats though). + * + * @also: + * @FT_HAS_VERTICAL can be used to check for vertical metrics. + * + */ +#define FT_HAS_HORIZONTAL( face ) \ + ( !!( (face)->face_flags & FT_FACE_FLAG_HORIZONTAL ) ) + + + /************************************************************************** + * + * @macro: + * FT_HAS_VERTICAL + * + * @description: + * A macro that returns true whenever a face object contains real + * vertical metrics (and not only synthesized ones). + * + */ +#define FT_HAS_VERTICAL( face ) \ + ( !!( (face)->face_flags & FT_FACE_FLAG_VERTICAL ) ) + + + /************************************************************************** + * + * @macro: + * FT_HAS_KERNING + * + * @description: + * A macro that returns true whenever a face object contains kerning data + * that can be accessed with @FT_Get_Kerning. + * + */ +#define FT_HAS_KERNING( face ) \ + ( !!( (face)->face_flags & FT_FACE_FLAG_KERNING ) ) + + + /************************************************************************** + * + * @macro: + * FT_IS_SCALABLE + * + * @description: + * A macro that returns true whenever a face object contains a scalable + * font face (true for TrueType, Type~1, Type~42, CID, OpenType/CFF, and + * PFR font formats). + * + */ +#define FT_IS_SCALABLE( face ) \ + ( !!( (face)->face_flags & FT_FACE_FLAG_SCALABLE ) ) + + + /************************************************************************** + * + * @macro: + * FT_IS_SFNT + * + * @description: + * A macro that returns true whenever a face object contains a font whose + * format is based on the SFNT storage scheme. This usually means: + * TrueType fonts, OpenType fonts, as well as SFNT-based embedded bitmap + * fonts. + * + * If this macro is true, all functions defined in @FT_SFNT_NAMES_H and + * @FT_TRUETYPE_TABLES_H are available. + * + */ +#define FT_IS_SFNT( face ) \ + ( !!( (face)->face_flags & FT_FACE_FLAG_SFNT ) ) + + + /************************************************************************** + * + * @macro: + * FT_IS_FIXED_WIDTH + * + * @description: + * A macro that returns true whenever a face object contains a font face + * that contains fixed-width (or 'monospace', 'fixed-pitch', etc.) + * glyphs. + * + */ +#define FT_IS_FIXED_WIDTH( face ) \ + ( !!( (face)->face_flags & FT_FACE_FLAG_FIXED_WIDTH ) ) + + + /************************************************************************** + * + * @macro: + * FT_HAS_FIXED_SIZES + * + * @description: + * A macro that returns true whenever a face object contains some + * embedded bitmaps. See the `available_sizes` field of the @FT_FaceRec + * structure. + * + */ +#define FT_HAS_FIXED_SIZES( face ) \ + ( !!( (face)->face_flags & FT_FACE_FLAG_FIXED_SIZES ) ) + + + /************************************************************************** + * + * @section: + * other_api_data + * + */ + + /************************************************************************** + * + * @macro: + * FT_HAS_FAST_GLYPHS + * + * @description: + * Deprecated. + * + */ +#define FT_HAS_FAST_GLYPHS( face ) 0 + + + /************************************************************************** + * + * @section: + * font_testing_macros + * + */ + + /************************************************************************** + * + * @macro: + * FT_HAS_GLYPH_NAMES + * + * @description: + * A macro that returns true whenever a face object contains some glyph + * names that can be accessed through @FT_Get_Glyph_Name. + * + */ +#define FT_HAS_GLYPH_NAMES( face ) \ + ( !!( (face)->face_flags & FT_FACE_FLAG_GLYPH_NAMES ) ) + + + /************************************************************************** + * + * @macro: + * FT_HAS_MULTIPLE_MASTERS + * + * @description: + * A macro that returns true whenever a face object contains some + * multiple masters. The functions provided by @FT_MULTIPLE_MASTERS_H + * are then available to choose the exact design you want. + * + */ +#define FT_HAS_MULTIPLE_MASTERS( face ) \ + ( !!( (face)->face_flags & FT_FACE_FLAG_MULTIPLE_MASTERS ) ) + + + /************************************************************************** + * + * @macro: + * FT_IS_NAMED_INSTANCE + * + * @description: + * A macro that returns true whenever a face object is a named instance + * of a GX or OpenType variation font. + * + * [Since 2.9] Changing the design coordinates with + * @FT_Set_Var_Design_Coordinates or @FT_Set_Var_Blend_Coordinates does + * not influence the return value of this macro (only + * @FT_Set_Named_Instance does that). + * + * @since: + * 2.7 + * + */ +#define FT_IS_NAMED_INSTANCE( face ) \ + ( !!( (face)->face_index & 0x7FFF0000L ) ) + + + /************************************************************************** + * + * @macro: + * FT_IS_VARIATION + * + * @description: + * A macro that returns true whenever a face object has been altered by + * @FT_Set_MM_Design_Coordinates, @FT_Set_Var_Design_Coordinates, + * @FT_Set_Var_Blend_Coordinates, or @FT_Set_MM_WeightVector. + * + * @since: + * 2.9 + * + */ +#define FT_IS_VARIATION( face ) \ + ( !!( (face)->face_flags & FT_FACE_FLAG_VARIATION ) ) + + + /************************************************************************** + * + * @macro: + * FT_IS_CID_KEYED + * + * @description: + * A macro that returns true whenever a face object contains a CID-keyed + * font. See the discussion of @FT_FACE_FLAG_CID_KEYED for more details. + * + * If this macro is true, all functions defined in @FT_CID_H are + * available. + * + */ +#define FT_IS_CID_KEYED( face ) \ + ( !!( (face)->face_flags & FT_FACE_FLAG_CID_KEYED ) ) + + + /************************************************************************** + * + * @macro: + * FT_IS_TRICKY + * + * @description: + * A macro that returns true whenever a face represents a 'tricky' font. + * See the discussion of @FT_FACE_FLAG_TRICKY for more details. + * + */ +#define FT_IS_TRICKY( face ) \ + ( !!( (face)->face_flags & FT_FACE_FLAG_TRICKY ) ) + + + /************************************************************************** + * + * @macro: + * FT_HAS_COLOR + * + * @description: + * A macro that returns true whenever a face object contains tables for + * color glyphs. + * + * @since: + * 2.5.1 + * + */ +#define FT_HAS_COLOR( face ) \ + ( !!( (face)->face_flags & FT_FACE_FLAG_COLOR ) ) + + + /************************************************************************** + * + * @macro: + * FT_HAS_SVG + * + * @description: + * A macro that returns true whenever a face object contains an 'SVG~' + * OpenType table. + * + * @since: + * 2.12 + */ +#define FT_HAS_SVG( face ) \ + ( !!( (face)->face_flags & FT_FACE_FLAG_SVG ) ) + + + /************************************************************************** + * + * @macro: + * FT_HAS_SBIX + * + * @description: + * A macro that returns true whenever a face object contains an 'sbix' + * OpenType table *and* outline glyphs. + * + * Currently, FreeType only supports bitmap glyphs in PNG format for this + * table (i.e., JPEG and TIFF formats are unsupported, as are + * Apple-specific formats not part of the OpenType specification). + * + * @note: + * For backward compatibility, a font with an 'sbix' table is treated as + * a bitmap-only face. Using @FT_Open_Face with + * @FT_PARAM_TAG_IGNORE_SBIX, an application can switch off 'sbix' + * handling so that the face is treated as an ordinary outline font with + * scalable outlines. + * + * Here is some pseudo code that roughly illustrates how to implement + * 'sbix' handling according to the OpenType specification. + * + * ``` + * if ( FT_HAS_SBIX( face ) ) + * { + * // open font as a scalable one without sbix handling + * FT_Face face2; + * FT_Parameter param = { FT_PARAM_TAG_IGNORE_SBIX, NULL }; + * FT_Open_Args args = { FT_OPEN_PARAMS | ..., + * ..., + * 1, ¶m }; + * + * + * FT_Open_Face( library, &args, 0, &face2 ); + * + * available_size` as necessary into + * `preferred_sizes`[*]> + * + * for ( i = 0; i < face->num_fixed_sizes; i++ ) + * { + * size = preferred_sizes[i].size; + * + * error = FT_Set_Pixel_Sizes( face, size, size ); + * + * + * // check whether we have a glyph in a bitmap strike + * error = FT_Load_Glyph( face, + * glyph_index, + * FT_LOAD_SBITS_ONLY | + * FT_LOAD_BITMAP_METRICS_ONLY ); + * if ( error == FT_Err_Invalid_Argument ) + * continue; + * else if ( error ) + * + * else + * break; + * } + * + * if ( i != face->num_fixed_sizes ) + * + * + * if ( i == face->num_fixed_sizes || + * FT_HAS_SBIX_OVERLAY( face ) ) + * + * } + * ``` + * + * [*] Assuming a target value of 400dpi and available strike sizes 100, + * 200, 300, and 400dpi, a possible order might be [400, 200, 300, 100]: + * scaling 200dpi to 400dpi usually gives better results than scaling + * 300dpi to 400dpi; it is also much faster. However, scaling 100dpi to + * 400dpi can yield a too pixelated result, thus the preference might be + * 300dpi over 100dpi. + * + * @since: + * 2.12 + */ +#define FT_HAS_SBIX( face ) \ + ( !!( (face)->face_flags & FT_FACE_FLAG_SBIX ) ) + + + /************************************************************************** + * + * @macro: + * FT_HAS_SBIX_OVERLAY + * + * @description: + * A macro that returns true whenever a face object contains an 'sbix' + * OpenType table with bit~1 in its `flags` field set, instructing the + * application to overlay the bitmap strike with the corresponding + * outline glyph. See @FT_HAS_SBIX for pseudo code how to use it. + * + * @since: + * 2.12 + */ +#define FT_HAS_SBIX_OVERLAY( face ) \ + ( !!( (face)->face_flags & FT_FACE_FLAG_SBIX_OVERLAY ) ) + + + /************************************************************************** + * + * @section: + * face_creation + * + */ + + /************************************************************************** + * + * @enum: + * FT_STYLE_FLAG_XXX + * + * @description: + * A list of bit flags to indicate the style of a given face. These are + * used in the `style_flags` field of @FT_FaceRec. + * + * @values: + * FT_STYLE_FLAG_ITALIC :: + * The face style is italic or oblique. + * + * FT_STYLE_FLAG_BOLD :: + * The face is bold. + * + * @note: + * The style information as provided by FreeType is very basic. More + * details are beyond the scope and should be done on a higher level (for + * example, by analyzing various fields of the 'OS/2' table in SFNT based + * fonts). + */ +#define FT_STYLE_FLAG_ITALIC ( 1 << 0 ) +#define FT_STYLE_FLAG_BOLD ( 1 << 1 ) + + + /************************************************************************** + * + * @section: + * other_api_data + * + */ + + /************************************************************************** + * + * @type: + * FT_Size_Internal + * + * @description: + * An opaque handle to an `FT_Size_InternalRec` structure, used to model + * private data of a given @FT_Size object. + */ + typedef struct FT_Size_InternalRec_* FT_Size_Internal; + + + /************************************************************************** + * + * @section: + * sizing_and_scaling + * + */ + + /************************************************************************** + * + * @struct: + * FT_Size_Metrics + * + * @description: + * The size metrics structure gives the metrics of a size object. + * + * @fields: + * x_ppem :: + * The width of the scaled EM square in pixels, hence the term 'ppem' + * (pixels per EM). It is also referred to as 'nominal width'. + * + * y_ppem :: + * The height of the scaled EM square in pixels, hence the term 'ppem' + * (pixels per EM). It is also referred to as 'nominal height'. + * + * x_scale :: + * A 16.16 fractional scaling value to convert horizontal metrics from + * font units to 26.6 fractional pixels. Only relevant for scalable + * font formats. + * + * y_scale :: + * A 16.16 fractional scaling value to convert vertical metrics from + * font units to 26.6 fractional pixels. Only relevant for scalable + * font formats. + * + * ascender :: + * The ascender in 26.6 fractional pixels, rounded up to an integer + * value. See @FT_FaceRec for the details. + * + * descender :: + * The descender in 26.6 fractional pixels, rounded down to an integer + * value. See @FT_FaceRec for the details. + * + * height :: + * The height in 26.6 fractional pixels, rounded to an integer value. + * See @FT_FaceRec for the details. + * + * max_advance :: + * The maximum advance width in 26.6 fractional pixels, rounded to an + * integer value. See @FT_FaceRec for the details. + * + * @note: + * The scaling values, if relevant, are determined first during a size + * changing operation. The remaining fields are then set by the driver. + * For scalable formats, they are usually set to scaled values of the + * corresponding fields in @FT_FaceRec. Some values like ascender or + * descender are rounded for historical reasons; more precise values (for + * outline fonts) can be derived by scaling the corresponding @FT_FaceRec + * values manually, with code similar to the following. + * + * ``` + * scaled_ascender = FT_MulFix( face->ascender, + * size_metrics->y_scale ); + * ``` + * + * Note that due to glyph hinting and the selected rendering mode these + * values are usually not exact; consequently, they must be treated as + * unreliable with an error margin of at least one pixel! + * + * Indeed, the only way to get the exact metrics is to render _all_ + * glyphs. As this would be a definite performance hit, it is up to + * client applications to perform such computations. + * + * The `FT_Size_Metrics` structure is valid for bitmap fonts also. + * + * + * **TrueType fonts with native bytecode hinting** + * + * All applications that handle TrueType fonts with native hinting must + * be aware that TTFs expect different rounding of vertical font + * dimensions. The application has to cater for this, especially if it + * wants to rely on a TTF's vertical data (for example, to properly align + * box characters vertically). + * + * Only the application knows _in advance_ that it is going to use native + * hinting for TTFs! FreeType, on the other hand, selects the hinting + * mode not at the time of creating an @FT_Size object but much later, + * namely while calling @FT_Load_Glyph. + * + * Here is some pseudo code that illustrates a possible solution. + * + * ``` + * font_format = FT_Get_Font_Format( face ); + * + * if ( !strcmp( font_format, "TrueType" ) && + * do_native_bytecode_hinting ) + * { + * ascender = ROUND( FT_MulFix( face->ascender, + * size_metrics->y_scale ) ); + * descender = ROUND( FT_MulFix( face->descender, + * size_metrics->y_scale ) ); + * } + * else + * { + * ascender = size_metrics->ascender; + * descender = size_metrics->descender; + * } + * + * height = size_metrics->height; + * max_advance = size_metrics->max_advance; + * ``` + */ + typedef struct FT_Size_Metrics_ + { + FT_UShort x_ppem; /* horizontal pixels per EM */ + FT_UShort y_ppem; /* vertical pixels per EM */ + + FT_Fixed x_scale; /* scaling values used to convert font */ + FT_Fixed y_scale; /* units to 26.6 fractional pixels */ + + FT_Pos ascender; /* ascender in 26.6 frac. pixels */ + FT_Pos descender; /* descender in 26.6 frac. pixels */ + FT_Pos height; /* text height in 26.6 frac. pixels */ + FT_Pos max_advance; /* max horizontal advance, in 26.6 pixels */ + + } FT_Size_Metrics; + + + /************************************************************************** + * + * @struct: + * FT_SizeRec + * + * @description: + * FreeType root size class structure. A size object models a face + * object at a given size. + * + * @fields: + * face :: + * Handle to the parent face object. + * + * generic :: + * A typeless pointer, unused by the FreeType library or any of its + * drivers. It can be used by client applications to link their own + * data to each size object. + * + * metrics :: + * Metrics for this size object. This field is read-only. + */ + typedef struct FT_SizeRec_ + { + FT_Face face; /* parent face object */ + FT_Generic generic; /* generic pointer for client uses */ + FT_Size_Metrics metrics; /* size metrics */ + FT_Size_Internal internal; + + } FT_SizeRec; + + + /************************************************************************** + * + * @section: + * other_api_data + * + */ + + /************************************************************************** + * + * @struct: + * FT_SubGlyph + * + * @description: + * The subglyph structure is an internal object used to describe + * subglyphs (for example, in the case of composites). + * + * @note: + * The subglyph implementation is not part of the high-level API, hence + * the forward structure declaration. + * + * You can however retrieve subglyph information with + * @FT_Get_SubGlyph_Info. + */ + typedef struct FT_SubGlyphRec_* FT_SubGlyph; + + + /************************************************************************** + * + * @type: + * FT_Slot_Internal + * + * @description: + * An opaque handle to an `FT_Slot_InternalRec` structure, used to model + * private data of a given @FT_GlyphSlot object. + */ + typedef struct FT_Slot_InternalRec_* FT_Slot_Internal; + + + /************************************************************************** + * + * @section: + * glyph_retrieval + * + */ + + /************************************************************************** + * + * @struct: + * FT_GlyphSlotRec + * + * @description: + * FreeType root glyph slot class structure. A glyph slot is a container + * where individual glyphs can be loaded, be they in outline or bitmap + * format. + * + * @fields: + * library :: + * A handle to the FreeType library instance this slot belongs to. + * + * face :: + * A handle to the parent face object. + * + * next :: + * In some cases (like some font tools), several glyph slots per face + * object can be a good thing. As this is rare, the glyph slots are + * listed through a direct, single-linked list using its `next` field. + * + * glyph_index :: + * [Since 2.10] The glyph index passed as an argument to @FT_Load_Glyph + * while initializing the glyph slot. + * + * generic :: + * A typeless pointer unused by the FreeType library or any of its + * drivers. It can be used by client applications to link their own + * data to each glyph slot object. + * + * metrics :: + * The metrics of the last loaded glyph in the slot. The returned + * values depend on the last load flags (see the @FT_Load_Glyph API + * function) and can be expressed either in 26.6 fractional pixels or + * font units. + * + * Note that even when the glyph image is transformed, the metrics are + * not. + * + * linearHoriAdvance :: + * The advance width of the unhinted glyph. Its value is expressed in + * 16.16 fractional pixels, unless @FT_LOAD_LINEAR_DESIGN is set when + * loading the glyph. This field can be important to perform correct + * WYSIWYG layout. Only relevant for scalable glyphs. + * + * linearVertAdvance :: + * The advance height of the unhinted glyph. Its value is expressed in + * 16.16 fractional pixels, unless @FT_LOAD_LINEAR_DESIGN is set when + * loading the glyph. This field can be important to perform correct + * WYSIWYG layout. Only relevant for scalable glyphs. + * + * advance :: + * This shorthand is, depending on @FT_LOAD_IGNORE_TRANSFORM, the + * transformed (hinted) advance width for the glyph, in 26.6 fractional + * pixel format. As specified with @FT_LOAD_VERTICAL_LAYOUT, it uses + * either the `horiAdvance` or the `vertAdvance` value of `metrics` + * field. + * + * format :: + * This field indicates the format of the image contained in the glyph + * slot. Typically @FT_GLYPH_FORMAT_BITMAP, @FT_GLYPH_FORMAT_OUTLINE, + * or @FT_GLYPH_FORMAT_COMPOSITE, but other values are possible. + * + * bitmap :: + * This field is used as a bitmap descriptor. Note that the address + * and content of the bitmap buffer can change between calls of + * @FT_Load_Glyph and a few other functions. + * + * bitmap_left :: + * The bitmap's left bearing expressed in integer pixels. + * + * bitmap_top :: + * The bitmap's top bearing expressed in integer pixels. This is the + * distance from the baseline to the top-most glyph scanline, upwards + * y~coordinates being **positive**. + * + * outline :: + * The outline descriptor for the current glyph image if its format is + * @FT_GLYPH_FORMAT_OUTLINE. Once a glyph is loaded, `outline` can be + * transformed, distorted, emboldened, etc. However, it must not be + * freed. + * + * [Since 2.10.1] If @FT_LOAD_NO_SCALE is set, outline coordinates of + * OpenType variation fonts for a selected instance are internally + * handled as 26.6 fractional font units but returned as (rounded) + * integers, as expected. To get unrounded font units, don't use + * @FT_LOAD_NO_SCALE but load the glyph with @FT_LOAD_NO_HINTING and + * scale it, using the font's `units_per_EM` value as the ppem. + * + * num_subglyphs :: + * The number of subglyphs in a composite glyph. This field is only + * valid for the composite glyph format that should normally only be + * loaded with the @FT_LOAD_NO_RECURSE flag. + * + * subglyphs :: + * An array of subglyph descriptors for composite glyphs. There are + * `num_subglyphs` elements in there. Currently internal to FreeType. + * + * control_data :: + * Certain font drivers can also return the control data for a given + * glyph image (e.g. TrueType bytecode, Type~1 charstrings, etc.). + * This field is a pointer to such data; it is currently internal to + * FreeType. + * + * control_len :: + * This is the length in bytes of the control data. Currently internal + * to FreeType. + * + * other :: + * Reserved. + * + * lsb_delta :: + * The difference between hinted and unhinted left side bearing while + * auto-hinting is active. Zero otherwise. + * + * rsb_delta :: + * The difference between hinted and unhinted right side bearing while + * auto-hinting is active. Zero otherwise. + * + * @note: + * If @FT_Load_Glyph is called with default flags (see @FT_LOAD_DEFAULT) + * the glyph image is loaded in the glyph slot in its native format + * (e.g., an outline glyph for TrueType and Type~1 formats). [Since 2.9] + * The prospective bitmap metrics are calculated according to + * @FT_LOAD_TARGET_XXX and other flags even for the outline glyph, even + * if @FT_LOAD_RENDER is not set. + * + * This image can later be converted into a bitmap by calling + * @FT_Render_Glyph. This function searches the current renderer for the + * native image's format, then invokes it. + * + * The renderer is in charge of transforming the native image through the + * slot's face transformation fields, then converting it into a bitmap + * that is returned in `slot->bitmap`. + * + * Note that `slot->bitmap_left` and `slot->bitmap_top` are also used to + * specify the position of the bitmap relative to the current pen + * position (e.g., coordinates (0,0) on the baseline). Of course, + * `slot->format` is also changed to @FT_GLYPH_FORMAT_BITMAP. + * + * Here is a small pseudo code fragment that shows how to use `lsb_delta` + * and `rsb_delta` to do fractional positioning of glyphs: + * + * ``` + * FT_GlyphSlot slot = face->glyph; + * FT_Pos origin_x = 0; + * + * + * for all glyphs do + * + * + * FT_Outline_Translate( slot->outline, origin_x & 63, 0 ); + * + * + * + * + * + * origin_x += slot->advance.x; + * origin_x += slot->lsb_delta - slot->rsb_delta; + * endfor + * ``` + * + * Here is another small pseudo code fragment that shows how to use + * `lsb_delta` and `rsb_delta` to improve integer positioning of glyphs: + * + * ``` + * FT_GlyphSlot slot = face->glyph; + * FT_Pos origin_x = 0; + * FT_Pos prev_rsb_delta = 0; + * + * + * for all glyphs do + * + * + * + * + * if ( prev_rsb_delta - slot->lsb_delta > 32 ) + * origin_x -= 64; + * else if ( prev_rsb_delta - slot->lsb_delta < -31 ) + * origin_x += 64; + * + * prev_rsb_delta = slot->rsb_delta; + * + * + * + * origin_x += slot->advance.x; + * endfor + * ``` + * + * If you use strong auto-hinting, you **must** apply these delta values! + * Otherwise you will experience far too large inter-glyph spacing at + * small rendering sizes in most cases. Note that it doesn't harm to use + * the above code for other hinting modes also, since the delta values + * are zero then. + */ + typedef struct FT_GlyphSlotRec_ + { + FT_Library library; + FT_Face face; + FT_GlyphSlot next; + FT_UInt glyph_index; /* new in 2.10; was reserved previously */ + FT_Generic generic; + + FT_Glyph_Metrics metrics; + FT_Fixed linearHoriAdvance; + FT_Fixed linearVertAdvance; + FT_Vector advance; + + FT_Glyph_Format format; + + FT_Bitmap bitmap; + FT_Int bitmap_left; + FT_Int bitmap_top; + + FT_Outline outline; + + FT_UInt num_subglyphs; + FT_SubGlyph subglyphs; + + void* control_data; + long control_len; + + FT_Pos lsb_delta; + FT_Pos rsb_delta; + + void* other; + + FT_Slot_Internal internal; + + } FT_GlyphSlotRec; + + + /*************************************************************************/ + /*************************************************************************/ + /* */ + /* F U N C T I O N S */ + /* */ + /*************************************************************************/ + /*************************************************************************/ + + + /************************************************************************** + * + * @section: + * library_setup + * + */ + + /************************************************************************** + * + * @function: + * FT_Init_FreeType + * + * @description: + * Initialize a new FreeType library object. The set of modules that are + * registered by this function is determined at build time. + * + * @output: + * alibrary :: + * A handle to a new library object. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * In case you want to provide your own memory allocating routines, use + * @FT_New_Library instead, followed by a call to @FT_Add_Default_Modules + * (or a series of calls to @FT_Add_Module) and + * @FT_Set_Default_Properties. + * + * See the documentation of @FT_Library and @FT_Face for multi-threading + * issues. + * + * If you need reference-counting (cf. @FT_Reference_Library), use + * @FT_New_Library and @FT_Done_Library. + * + * If compilation option `FT_CONFIG_OPTION_ENVIRONMENT_PROPERTIES` is + * set, this function reads the `FREETYPE_PROPERTIES` environment + * variable to control driver properties. See section @properties for + * more. + */ + FT_EXPORT( FT_Error ) + FT_Init_FreeType( FT_Library *alibrary ); + + + /************************************************************************** + * + * @function: + * FT_Done_FreeType + * + * @description: + * Destroy a given FreeType library object and all of its children, + * including resources, drivers, faces, sizes, etc. + * + * @input: + * library :: + * A handle to the target library object. + * + * @return: + * FreeType error code. 0~means success. + */ + FT_EXPORT( FT_Error ) + FT_Done_FreeType( FT_Library library ); + + + /************************************************************************** + * + * @section: + * face_creation + * + */ + + /************************************************************************** + * + * @enum: + * FT_OPEN_XXX + * + * @description: + * A list of bit field constants used within the `flags` field of the + * @FT_Open_Args structure. + * + * @values: + * FT_OPEN_MEMORY :: + * This is a memory-based stream. + * + * FT_OPEN_STREAM :: + * Copy the stream from the `stream` field. + * + * FT_OPEN_PATHNAME :: + * Create a new input stream from a C~path name. + * + * FT_OPEN_DRIVER :: + * Use the `driver` field. + * + * FT_OPEN_PARAMS :: + * Use the `num_params` and `params` fields. + * + * @note: + * The `FT_OPEN_MEMORY`, `FT_OPEN_STREAM`, and `FT_OPEN_PATHNAME` flags + * are mutually exclusive. + */ +#define FT_OPEN_MEMORY 0x1 +#define FT_OPEN_STREAM 0x2 +#define FT_OPEN_PATHNAME 0x4 +#define FT_OPEN_DRIVER 0x8 +#define FT_OPEN_PARAMS 0x10 + + + /* these constants are deprecated; use the corresponding `FT_OPEN_XXX` */ + /* values instead */ +#define ft_open_memory FT_OPEN_MEMORY +#define ft_open_stream FT_OPEN_STREAM +#define ft_open_pathname FT_OPEN_PATHNAME +#define ft_open_driver FT_OPEN_DRIVER +#define ft_open_params FT_OPEN_PARAMS + + + /************************************************************************** + * + * @struct: + * FT_Parameter + * + * @description: + * A simple structure to pass more or less generic parameters to + * @FT_Open_Face and @FT_Face_Properties. + * + * @fields: + * tag :: + * A four-byte identification tag. + * + * data :: + * A pointer to the parameter data. + * + * @note: + * The ID and function of parameters are driver-specific. See section + * @parameter_tags for more information. + */ + typedef struct FT_Parameter_ + { + FT_ULong tag; + FT_Pointer data; + + } FT_Parameter; + + + /************************************************************************** + * + * @struct: + * FT_Open_Args + * + * @description: + * A structure to indicate how to open a new font file or stream. A + * pointer to such a structure can be used as a parameter for the + * functions @FT_Open_Face and @FT_Attach_Stream. + * + * @fields: + * flags :: + * A set of bit flags indicating how to use the structure. + * + * memory_base :: + * The first byte of the file in memory. + * + * memory_size :: + * The size in bytes of the file in memory. + * + * pathname :: + * A pointer to an 8-bit file pathname, which must be a C~string (i.e., + * no null bytes except at the very end). The pointer is not owned by + * FreeType. + * + * stream :: + * A handle to a source stream object. + * + * driver :: + * This field is exclusively used by @FT_Open_Face; it simply specifies + * the font driver to use for opening the face. If set to `NULL`, + * FreeType tries to load the face with each one of the drivers in its + * list. + * + * num_params :: + * The number of extra parameters. + * + * params :: + * Extra parameters passed to the font driver when opening a new face. + * + * @note: + * The stream type is determined by the contents of `flags`: + * + * If the @FT_OPEN_MEMORY bit is set, assume that this is a memory file + * of `memory_size` bytes, located at `memory_address`. The data are not + * copied, and the client is responsible for releasing and destroying + * them _after_ the corresponding call to @FT_Done_Face. + * + * Otherwise, if the @FT_OPEN_STREAM bit is set, assume that a custom + * input stream `stream` is used. + * + * Otherwise, if the @FT_OPEN_PATHNAME bit is set, assume that this is a + * normal file and use `pathname` to open it. + * + * If none of the above bits are set or if multiple are set at the same + * time, the flags are invalid and @FT_Open_Face fails. + * + * If the @FT_OPEN_DRIVER bit is set, @FT_Open_Face only tries to open + * the file with the driver whose handler is in `driver`. + * + * If the @FT_OPEN_PARAMS bit is set, the parameters given by + * `num_params` and `params` is used. They are ignored otherwise. + * + * Ideally, both the `pathname` and `params` fields should be tagged as + * 'const'; this is missing for API backward compatibility. In other + * words, applications should treat them as read-only. + */ + typedef struct FT_Open_Args_ + { + FT_UInt flags; + const FT_Byte* memory_base; + FT_Long memory_size; + FT_String* pathname; + FT_Stream stream; + FT_Module driver; + FT_Int num_params; + FT_Parameter* params; + + } FT_Open_Args; + + + /************************************************************************** + * + * @function: + * FT_New_Face + * + * @description: + * Call @FT_Open_Face to open a font by its pathname. + * + * @inout: + * library :: + * A handle to the library resource. + * + * @input: + * pathname :: + * A path to the font file. + * + * face_index :: + * See @FT_Open_Face for a detailed description of this parameter. + * + * @output: + * aface :: + * A handle to a new face object. If `face_index` is greater than or + * equal to zero, it must be non-`NULL`. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * The `pathname` string should be recognizable as such by a standard + * `fopen` call on your system; in particular, this means that `pathname` + * must not contain null bytes. If that is not sufficient to address all + * file name possibilities (for example, to handle wide character file + * names on Windows in UTF-16 encoding) you might use @FT_Open_Face to + * pass a memory array or a stream object instead. + * + * Use @FT_Done_Face to destroy the created @FT_Face object (along with + * its slot and sizes). + */ + FT_EXPORT( FT_Error ) + FT_New_Face( FT_Library library, + const char* filepathname, + FT_Long face_index, + FT_Face *aface ); + + + /************************************************************************** + * + * @function: + * FT_New_Memory_Face + * + * @description: + * Call @FT_Open_Face to open a font that has been loaded into memory. + * + * @inout: + * library :: + * A handle to the library resource. + * + * @input: + * file_base :: + * A pointer to the beginning of the font data. + * + * file_size :: + * The size of the memory chunk used by the font data. + * + * face_index :: + * See @FT_Open_Face for a detailed description of this parameter. + * + * @output: + * aface :: + * A handle to a new face object. If `face_index` is greater than or + * equal to zero, it must be non-`NULL`. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * You must not deallocate the memory before calling @FT_Done_Face. + */ + FT_EXPORT( FT_Error ) + FT_New_Memory_Face( FT_Library library, + const FT_Byte* file_base, + FT_Long file_size, + FT_Long face_index, + FT_Face *aface ); + + + /************************************************************************** + * + * @function: + * FT_Open_Face + * + * @description: + * Create a face object from a given resource described by @FT_Open_Args. + * + * @inout: + * library :: + * A handle to the library resource. + * + * @input: + * args :: + * A pointer to an `FT_Open_Args` structure that must be filled by the + * caller. + * + * face_index :: + * This field holds two different values. Bits 0-15 are the index of + * the face in the font file (starting with value~0). Set it to~0 if + * there is only one face in the font file. + * + * [Since 2.6.1] Bits 16-30 are relevant to GX and OpenType variation + * fonts only, specifying the named instance index for the current face + * index (starting with value~1; value~0 makes FreeType ignore named + * instances). For non-variation fonts, bits 16-30 are ignored. + * Assuming that you want to access the third named instance in face~4, + * `face_index` should be set to 0x00030004. If you want to access + * face~4 without variation handling, simply set `face_index` to + * value~4. + * + * `FT_Open_Face` and its siblings can be used to quickly check whether + * the font format of a given font resource is supported by FreeType. + * In general, if the `face_index` argument is negative, the function's + * return value is~0 if the font format is recognized, or non-zero + * otherwise. The function allocates a more or less empty face handle + * in `*aface` (if `aface` isn't `NULL`); the only two useful fields in + * this special case are `face->num_faces` and `face->style_flags`. + * For any negative value of `face_index`, `face->num_faces` gives the + * number of faces within the font file. For the negative value + * '-(N+1)' (with 'N' a non-negative 16-bit value), bits 16-30 in + * `face->style_flags` give the number of named instances in face 'N' + * if we have a variation font (or zero otherwise). After examination, + * the returned @FT_Face structure should be deallocated with a call to + * @FT_Done_Face. + * + * @output: + * aface :: + * A handle to a new face object. If `face_index` is greater than or + * equal to zero, it must be non-`NULL`. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * Unlike FreeType 1.x, this function automatically creates a glyph slot + * for the face object that can be accessed directly through + * `face->glyph`. + * + * Each new face object created with this function also owns a default + * @FT_Size object, accessible as `face->size`. + * + * One @FT_Library instance can have multiple face objects, that is, + * @FT_Open_Face and its siblings can be called multiple times using the + * same `library` argument. + * + * See the discussion of reference counters in the description of + * @FT_Reference_Face. + * + * If `FT_OPEN_STREAM` is set in `args->flags`, the stream in + * `args->stream` is automatically closed before this function returns + * any error (including `FT_Err_Invalid_Argument`). + * + * @example: + * To loop over all faces, use code similar to the following snippet + * (omitting the error handling). + * + * ``` + * ... + * FT_Face face; + * FT_Long i, num_faces; + * + * + * error = FT_Open_Face( library, args, -1, &face ); + * if ( error ) { ... } + * + * num_faces = face->num_faces; + * FT_Done_Face( face ); + * + * for ( i = 0; i < num_faces; i++ ) + * { + * ... + * error = FT_Open_Face( library, args, i, &face ); + * ... + * FT_Done_Face( face ); + * ... + * } + * ``` + * + * To loop over all valid values for `face_index`, use something similar + * to the following snippet, again without error handling. The code + * accesses all faces immediately (thus only a single call of + * `FT_Open_Face` within the do-loop), with and without named instances. + * + * ``` + * ... + * FT_Face face; + * + * FT_Long num_faces = 0; + * FT_Long num_instances = 0; + * + * FT_Long face_idx = 0; + * FT_Long instance_idx = 0; + * + * + * do + * { + * FT_Long id = ( instance_idx << 16 ) + face_idx; + * + * + * error = FT_Open_Face( library, args, id, &face ); + * if ( error ) { ... } + * + * num_faces = face->num_faces; + * num_instances = face->style_flags >> 16; + * + * ... + * + * FT_Done_Face( face ); + * + * if ( instance_idx < num_instances ) + * instance_idx++; + * else + * { + * face_idx++; + * instance_idx = 0; + * } + * + * } while ( face_idx < num_faces ) + * ``` + */ + FT_EXPORT( FT_Error ) + FT_Open_Face( FT_Library library, + const FT_Open_Args* args, + FT_Long face_index, + FT_Face *aface ); + + + /************************************************************************** + * + * @function: + * FT_Attach_File + * + * @description: + * Call @FT_Attach_Stream to attach a file. + * + * @inout: + * face :: + * The target face object. + * + * @input: + * filepathname :: + * The pathname. + * + * @return: + * FreeType error code. 0~means success. + */ + FT_EXPORT( FT_Error ) + FT_Attach_File( FT_Face face, + const char* filepathname ); + + + /************************************************************************** + * + * @function: + * FT_Attach_Stream + * + * @description: + * 'Attach' data to a face object. Normally, this is used to read + * additional information for the face object. For example, you can + * attach an AFM file that comes with a Type~1 font to get the kerning + * values and other metrics. + * + * @inout: + * face :: + * The target face object. + * + * @input: + * parameters :: + * A pointer to @FT_Open_Args that must be filled by the caller. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * The meaning of the 'attach' (i.e., what really happens when the new + * file is read) is not fixed by FreeType itself. It really depends on + * the font format (and thus the font driver). + * + * Client applications are expected to know what they are doing when + * invoking this function. Most drivers simply do not implement file or + * stream attachments. + */ + FT_EXPORT( FT_Error ) + FT_Attach_Stream( FT_Face face, + const FT_Open_Args* parameters ); + + + /************************************************************************** + * + * @function: + * FT_Reference_Face + * + * @description: + * A counter gets initialized to~1 at the time an @FT_Face structure is + * created. This function increments the counter. @FT_Done_Face then + * only destroys a face if the counter is~1, otherwise it simply + * decrements the counter. + * + * This function helps in managing life-cycles of structures that + * reference @FT_Face objects. + * + * @input: + * face :: + * A handle to a target face object. + * + * @return: + * FreeType error code. 0~means success. + * + * @since: + * 2.4.2 + * + */ + FT_EXPORT( FT_Error ) + FT_Reference_Face( FT_Face face ); + + + /************************************************************************** + * + * @function: + * FT_Done_Face + * + * @description: + * Discard a given face object, as well as all of its child slots and + * sizes. + * + * @input: + * face :: + * A handle to a target face object. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * See the discussion of reference counters in the description of + * @FT_Reference_Face. + */ + FT_EXPORT( FT_Error ) + FT_Done_Face( FT_Face face ); + + + /************************************************************************** + * + * @section: + * sizing_and_scaling + * + */ + + /************************************************************************** + * + * @function: + * FT_Select_Size + * + * @description: + * Select a bitmap strike. To be more precise, this function sets the + * scaling factors of the active @FT_Size object in a face so that + * bitmaps from this particular strike are taken by @FT_Load_Glyph and + * friends. + * + * @inout: + * face :: + * A handle to a target face object. + * + * @input: + * strike_index :: + * The index of the bitmap strike in the `available_sizes` field of + * @FT_FaceRec structure. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * For bitmaps embedded in outline fonts it is common that only a subset + * of the available glyphs at a given ppem value is available. FreeType + * silently uses outlines if there is no bitmap for a given glyph index. + * + * For GX and OpenType variation fonts, a bitmap strike makes sense only + * if the default instance is active (that is, no glyph variation takes + * place); otherwise, FreeType simply ignores bitmap strikes. The same + * is true for all named instances that are different from the default + * instance. + * + * Don't use this function if you are using the FreeType cache API. + */ + FT_EXPORT( FT_Error ) + FT_Select_Size( FT_Face face, + FT_Int strike_index ); + + + /************************************************************************** + * + * @enum: + * FT_Size_Request_Type + * + * @description: + * An enumeration type that lists the supported size request types, i.e., + * what input size (in font units) maps to the requested output size (in + * pixels, as computed from the arguments of @FT_Size_Request). + * + * @values: + * FT_SIZE_REQUEST_TYPE_NOMINAL :: + * The nominal size. The `units_per_EM` field of @FT_FaceRec is used + * to determine both scaling values. + * + * This is the standard scaling found in most applications. In + * particular, use this size request type for TrueType fonts if they + * provide optical scaling or something similar. Note, however, that + * `units_per_EM` is a rather abstract value which bears no relation to + * the actual size of the glyphs in a font. + * + * FT_SIZE_REQUEST_TYPE_REAL_DIM :: + * The real dimension. The sum of the `ascender` and (minus of) the + * `descender` fields of @FT_FaceRec is used to determine both scaling + * values. + * + * FT_SIZE_REQUEST_TYPE_BBOX :: + * The font bounding box. The width and height of the `bbox` field of + * @FT_FaceRec are used to determine the horizontal and vertical + * scaling value, respectively. + * + * FT_SIZE_REQUEST_TYPE_CELL :: + * The `max_advance_width` field of @FT_FaceRec is used to determine + * the horizontal scaling value; the vertical scaling value is + * determined the same way as @FT_SIZE_REQUEST_TYPE_REAL_DIM does. + * Finally, both scaling values are set to the smaller one. This type + * is useful if you want to specify the font size for, say, a window of + * a given dimension and 80x24 cells. + * + * FT_SIZE_REQUEST_TYPE_SCALES :: + * Specify the scaling values directly. + * + * @note: + * The above descriptions only apply to scalable formats. For bitmap + * formats, the behaviour is up to the driver. + * + * See the note section of @FT_Size_Metrics if you wonder how size + * requesting relates to scaling values. + */ + typedef enum FT_Size_Request_Type_ + { + FT_SIZE_REQUEST_TYPE_NOMINAL, + FT_SIZE_REQUEST_TYPE_REAL_DIM, + FT_SIZE_REQUEST_TYPE_BBOX, + FT_SIZE_REQUEST_TYPE_CELL, + FT_SIZE_REQUEST_TYPE_SCALES, + + FT_SIZE_REQUEST_TYPE_MAX + + } FT_Size_Request_Type; + + + /************************************************************************** + * + * @struct: + * FT_Size_RequestRec + * + * @description: + * A structure to model a size request. + * + * @fields: + * type :: + * See @FT_Size_Request_Type. + * + * width :: + * The desired width, given as a 26.6 fractional point value (with 72pt + * = 1in). + * + * height :: + * The desired height, given as a 26.6 fractional point value (with + * 72pt = 1in). + * + * horiResolution :: + * The horizontal resolution (dpi, i.e., pixels per inch). If set to + * zero, `width` is treated as a 26.6 fractional **pixel** value, which + * gets internally rounded to an integer. + * + * vertResolution :: + * The vertical resolution (dpi, i.e., pixels per inch). If set to + * zero, `height` is treated as a 26.6 fractional **pixel** value, + * which gets internally rounded to an integer. + * + * @note: + * If `width` is zero, the horizontal scaling value is set equal to the + * vertical scaling value, and vice versa. + * + * If `type` is `FT_SIZE_REQUEST_TYPE_SCALES`, `width` and `height` are + * interpreted directly as 16.16 fractional scaling values, without any + * further modification, and both `horiResolution` and `vertResolution` + * are ignored. + */ + typedef struct FT_Size_RequestRec_ + { + FT_Size_Request_Type type; + FT_Long width; + FT_Long height; + FT_UInt horiResolution; + FT_UInt vertResolution; + + } FT_Size_RequestRec; + + + /************************************************************************** + * + * @struct: + * FT_Size_Request + * + * @description: + * A handle to a size request structure. + */ + typedef struct FT_Size_RequestRec_ *FT_Size_Request; + + + /************************************************************************** + * + * @function: + * FT_Request_Size + * + * @description: + * Resize the scale of the active @FT_Size object in a face. + * + * @inout: + * face :: + * A handle to a target face object. + * + * @input: + * req :: + * A pointer to a @FT_Size_RequestRec. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * Although drivers may select the bitmap strike matching the request, + * you should not rely on this if you intend to select a particular + * bitmap strike. Use @FT_Select_Size instead in that case. + * + * The relation between the requested size and the resulting glyph size + * is dependent entirely on how the size is defined in the source face. + * The font designer chooses the final size of each glyph relative to + * this size. For more information refer to + * 'https://freetype.org/freetype2/docs/glyphs/glyphs-2.html'. + * + * Contrary to @FT_Set_Char_Size, this function doesn't have special code + * to normalize zero-valued widths, heights, or resolutions, which are + * treated as @FT_LOAD_NO_SCALE. + * + * Don't use this function if you are using the FreeType cache API. + */ + FT_EXPORT( FT_Error ) + FT_Request_Size( FT_Face face, + FT_Size_Request req ); + + + /************************************************************************** + * + * @function: + * FT_Set_Char_Size + * + * @description: + * Call @FT_Request_Size to request the nominal size (in points). + * + * @inout: + * face :: + * A handle to a target face object. + * + * @input: + * char_width :: + * The nominal width, in 26.6 fractional points. + * + * char_height :: + * The nominal height, in 26.6 fractional points. + * + * horz_resolution :: + * The horizontal resolution in dpi. + * + * vert_resolution :: + * The vertical resolution in dpi. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * While this function allows fractional points as input values, the + * resulting ppem value for the given resolution is always rounded to the + * nearest integer. + * + * If either the character width or height is zero, it is set equal to + * the other value. + * + * If either the horizontal or vertical resolution is zero, it is set + * equal to the other value. + * + * A character width or height smaller than 1pt is set to 1pt; if both + * resolution values are zero, they are set to 72dpi. + * + * Don't use this function if you are using the FreeType cache API. + */ + FT_EXPORT( FT_Error ) + FT_Set_Char_Size( FT_Face face, + FT_F26Dot6 char_width, + FT_F26Dot6 char_height, + FT_UInt horz_resolution, + FT_UInt vert_resolution ); + + + /************************************************************************** + * + * @function: + * FT_Set_Pixel_Sizes + * + * @description: + * Call @FT_Request_Size to request the nominal size (in pixels). + * + * @inout: + * face :: + * A handle to the target face object. + * + * @input: + * pixel_width :: + * The nominal width, in pixels. + * + * pixel_height :: + * The nominal height, in pixels. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * You should not rely on the resulting glyphs matching or being + * constrained to this pixel size. Refer to @FT_Request_Size to + * understand how requested sizes relate to actual sizes. + * + * Don't use this function if you are using the FreeType cache API. + */ + FT_EXPORT( FT_Error ) + FT_Set_Pixel_Sizes( FT_Face face, + FT_UInt pixel_width, + FT_UInt pixel_height ); + + + /************************************************************************** + * + * @section: + * glyph_retrieval + * + */ + + /************************************************************************** + * + * @function: + * FT_Load_Glyph + * + * @description: + * Load a glyph into the glyph slot of a face object. + * + * @inout: + * face :: + * A handle to the target face object where the glyph is loaded. + * + * @input: + * glyph_index :: + * The index of the glyph in the font file. For CID-keyed fonts + * (either in PS or in CFF format) this argument specifies the CID + * value. + * + * load_flags :: + * A flag indicating what to load for this glyph. The @FT_LOAD_XXX + * flags can be used to control the glyph loading process (e.g., + * whether the outline should be scaled, whether to load bitmaps or + * not, whether to hint the outline, etc). + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * For proper scaling and hinting, the active @FT_Size object owned by + * the face has to be meaningfully initialized by calling + * @FT_Set_Char_Size before this function, for example. The loaded + * glyph may be transformed. See @FT_Set_Transform for the details. + * + * For subsetted CID-keyed fonts, `FT_Err_Invalid_Argument` is returned + * for invalid CID values (that is, for CID values that don't have a + * corresponding glyph in the font). See the discussion of the + * @FT_FACE_FLAG_CID_KEYED flag for more details. + * + * If you receive `FT_Err_Glyph_Too_Big`, try getting the glyph outline + * at EM size, then scale it manually and fill it as a graphics + * operation. + */ + FT_EXPORT( FT_Error ) + FT_Load_Glyph( FT_Face face, + FT_UInt glyph_index, + FT_Int32 load_flags ); + + + /************************************************************************** + * + * @section: + * character_mapping + * + */ + + /************************************************************************** + * + * @function: + * FT_Load_Char + * + * @description: + * Load a glyph into the glyph slot of a face object, accessed by its + * character code. + * + * @inout: + * face :: + * A handle to a target face object where the glyph is loaded. + * + * @input: + * char_code :: + * The glyph's character code, according to the current charmap used in + * the face. + * + * load_flags :: + * A flag indicating what to load for this glyph. The @FT_LOAD_XXX + * constants can be used to control the glyph loading process (e.g., + * whether the outline should be scaled, whether to load bitmaps or + * not, whether to hint the outline, etc). + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * This function simply calls @FT_Get_Char_Index and @FT_Load_Glyph. + * + * Many fonts contain glyphs that can't be loaded by this function since + * its glyph indices are not listed in any of the font's charmaps. + * + * If no active cmap is set up (i.e., `face->charmap` is zero), the call + * to @FT_Get_Char_Index is omitted, and the function behaves identically + * to @FT_Load_Glyph. + */ + FT_EXPORT( FT_Error ) + FT_Load_Char( FT_Face face, + FT_ULong char_code, + FT_Int32 load_flags ); + + + /************************************************************************** + * + * @section: + * glyph_retrieval + * + */ + + /************************************************************************** + * + * @enum: + * FT_LOAD_XXX + * + * @description: + * A list of bit field constants for @FT_Load_Glyph to indicate what kind + * of operations to perform during glyph loading. + * + * @values: + * FT_LOAD_DEFAULT :: + * Corresponding to~0, this value is used as the default glyph load + * operation. In this case, the following happens: + * + * 1. FreeType looks for a bitmap for the glyph corresponding to the + * face's current size. If one is found, the function returns. The + * bitmap data can be accessed from the glyph slot (see note below). + * + * 2. If no embedded bitmap is searched for or found, FreeType looks + * for a scalable outline. If one is found, it is loaded from the font + * file, scaled to device pixels, then 'hinted' to the pixel grid in + * order to optimize it. The outline data can be accessed from the + * glyph slot (see note below). + * + * Note that by default the glyph loader doesn't render outlines into + * bitmaps. The following flags are used to modify this default + * behaviour to more specific and useful cases. + * + * FT_LOAD_NO_SCALE :: + * Don't scale the loaded outline glyph but keep it in font units. + * This flag is also assumed if @FT_Size owned by the face was not + * properly initialized. + * + * This flag implies @FT_LOAD_NO_HINTING and @FT_LOAD_NO_BITMAP, and + * unsets @FT_LOAD_RENDER. + * + * If the font is 'tricky' (see @FT_FACE_FLAG_TRICKY for more), using + * `FT_LOAD_NO_SCALE` usually yields meaningless outlines because the + * subglyphs must be scaled and positioned with hinting instructions. + * This can be solved by loading the font without `FT_LOAD_NO_SCALE` + * and setting the character size to `font->units_per_EM`. + * + * FT_LOAD_NO_HINTING :: + * Disable hinting. This generally generates 'blurrier' bitmap glyphs + * when the glyphs are rendered in any of the anti-aliased modes. See + * also the note below. + * + * This flag is implied by @FT_LOAD_NO_SCALE. + * + * FT_LOAD_RENDER :: + * Call @FT_Render_Glyph after the glyph is loaded. By default, the + * glyph is rendered in @FT_RENDER_MODE_NORMAL mode. This can be + * overridden by @FT_LOAD_TARGET_XXX or @FT_LOAD_MONOCHROME. + * + * This flag is unset by @FT_LOAD_NO_SCALE. + * + * FT_LOAD_NO_BITMAP :: + * Ignore bitmap strikes when loading. Bitmap-only fonts ignore this + * flag. + * + * @FT_LOAD_NO_SCALE always sets this flag. + * + * FT_LOAD_SBITS_ONLY :: + * [Since 2.12] This is the opposite of @FT_LOAD_NO_BITMAP, more or + * less: @FT_Load_Glyph returns `FT_Err_Invalid_Argument` if the face + * contains a bitmap strike for the given size (or the strike selected + * by @FT_Select_Size) but there is no glyph in the strike. + * + * Note that this load flag was part of FreeType since version 2.0.6 + * but previously tagged as internal. + * + * FT_LOAD_VERTICAL_LAYOUT :: + * Load the glyph for vertical text layout. In particular, the + * `advance` value in the @FT_GlyphSlotRec structure is set to the + * `vertAdvance` value of the `metrics` field. + * + * In case @FT_HAS_VERTICAL doesn't return true, you shouldn't use this + * flag currently. Reason is that in this case vertical metrics get + * synthesized, and those values are not always consistent across + * various font formats. + * + * FT_LOAD_FORCE_AUTOHINT :: + * Prefer the auto-hinter over the font's native hinter. See also the + * note below. + * + * FT_LOAD_PEDANTIC :: + * Make the font driver perform pedantic verifications during glyph + * loading and hinting. This is mostly used to detect broken glyphs in + * fonts. By default, FreeType tries to handle broken fonts also. + * + * In particular, errors from the TrueType bytecode engine are not + * passed to the application if this flag is not set; this might result + * in partially hinted or distorted glyphs in case a glyph's bytecode + * is buggy. + * + * FT_LOAD_NO_RECURSE :: + * Don't load composite glyphs recursively. Instead, the font driver + * fills the `num_subglyph` and `subglyphs` values of the glyph slot; + * it also sets `glyph->format` to @FT_GLYPH_FORMAT_COMPOSITE. The + * description of subglyphs can then be accessed with + * @FT_Get_SubGlyph_Info. + * + * Don't use this flag for retrieving metrics information since some + * font drivers only return rudimentary data. + * + * This flag implies @FT_LOAD_NO_SCALE and @FT_LOAD_IGNORE_TRANSFORM. + * + * FT_LOAD_IGNORE_TRANSFORM :: + * Ignore the transform matrix set by @FT_Set_Transform. + * + * FT_LOAD_MONOCHROME :: + * This flag is used with @FT_LOAD_RENDER to indicate that you want to + * render an outline glyph to a 1-bit monochrome bitmap glyph, with + * 8~pixels packed into each byte of the bitmap data. + * + * Note that this has no effect on the hinting algorithm used. You + * should rather use @FT_LOAD_TARGET_MONO so that the + * monochrome-optimized hinting algorithm is used. + * + * FT_LOAD_LINEAR_DESIGN :: + * Keep `linearHoriAdvance` and `linearVertAdvance` fields of + * @FT_GlyphSlotRec in font units. See @FT_GlyphSlotRec for details. + * + * FT_LOAD_NO_AUTOHINT :: + * Disable the auto-hinter. See also the note below. + * + * FT_LOAD_COLOR :: + * Load colored glyphs. FreeType searches in the following order; + * there are slight differences depending on the font format. + * + * [Since 2.5] Load embedded color bitmap images (provided + * @FT_LOAD_NO_BITMAP is not set). The resulting color bitmaps, if + * available, have the @FT_PIXEL_MODE_BGRA format, with pre-multiplied + * color channels. If the flag is not set and color bitmaps are found, + * they are converted to 256-level gray bitmaps, using the + * @FT_PIXEL_MODE_GRAY format. + * + * [Since 2.12] If the glyph index maps to an entry in the face's + * 'SVG~' table, load the associated SVG document from this table and + * set the `format` field of @FT_GlyphSlotRec to @FT_GLYPH_FORMAT_SVG + * ([since 2.13.1] provided @FT_LOAD_NO_SVG is not set). Note that + * FreeType itself can't render SVG documents; however, the library + * provides hooks to seamlessly integrate an external renderer. See + * sections @ot_svg_driver and @svg_fonts for more. + * + * [Since 2.10, experimental] If the glyph index maps to an entry in + * the face's 'COLR' table with a 'CPAL' palette table (as defined in + * the OpenType specification), make @FT_Render_Glyph provide a default + * blending of the color glyph layers associated with the glyph index, + * using the same bitmap format as embedded color bitmap images. This + * is mainly for convenience and works only for glyphs in 'COLR' v0 + * tables. **There is no rendering support for 'COLR' v1** (with the + * exception of v1 tables that exclusively use v0 features)! You need + * a graphics library like Skia or Cairo to interpret the graphics + * commands stored in v1 tables. For full control of color layers use + * @FT_Get_Color_Glyph_Layer and FreeType's color functions like + * @FT_Palette_Select instead of setting @FT_LOAD_COLOR for rendering + * so that the client application can handle blending by itself. + * + * FT_LOAD_NO_SVG :: + * [Since 2.13.1] Ignore SVG glyph data when loading. + * + * FT_LOAD_COMPUTE_METRICS :: + * [Since 2.6.1] Compute glyph metrics from the glyph data, without the + * use of bundled metrics tables (for example, the 'hdmx' table in + * TrueType fonts). This flag is mainly used by font validating or + * font editing applications, which need to ignore, verify, or edit + * those tables. + * + * Currently, this flag is only implemented for TrueType fonts. + * + * FT_LOAD_BITMAP_METRICS_ONLY :: + * [Since 2.7.1] Request loading of the metrics and bitmap image + * information of a (possibly embedded) bitmap glyph without allocating + * or copying the bitmap image data itself. No effect if the target + * glyph is not a bitmap image. + * + * This flag unsets @FT_LOAD_RENDER. + * + * FT_LOAD_CROP_BITMAP :: + * Ignored. Deprecated. + * + * FT_LOAD_IGNORE_GLOBAL_ADVANCE_WIDTH :: + * Ignored. Deprecated. + * + * @note: + * By default, hinting is enabled and the font's native hinter (see + * @FT_FACE_FLAG_HINTER) is preferred over the auto-hinter. You can + * disable hinting by setting @FT_LOAD_NO_HINTING or change the + * precedence by setting @FT_LOAD_FORCE_AUTOHINT. You can also set + * @FT_LOAD_NO_AUTOHINT in case you don't want the auto-hinter to be used + * at all. + * + * See the description of @FT_FACE_FLAG_TRICKY for a special exception + * (affecting only a handful of Asian fonts). + * + * Besides deciding which hinter to use, you can also decide which + * hinting algorithm to use. See @FT_LOAD_TARGET_XXX for details. + * + * Note that the auto-hinter needs a valid Unicode cmap (either a native + * one or synthesized by FreeType) for producing correct results. If a + * font provides an incorrect mapping (for example, assigning the + * character code U+005A, LATIN CAPITAL LETTER~Z, to a glyph depicting a + * mathematical integral sign), the auto-hinter might produce useless + * results. + * + */ +#define FT_LOAD_DEFAULT 0x0 +#define FT_LOAD_NO_SCALE ( 1L << 0 ) +#define FT_LOAD_NO_HINTING ( 1L << 1 ) +#define FT_LOAD_RENDER ( 1L << 2 ) +#define FT_LOAD_NO_BITMAP ( 1L << 3 ) +#define FT_LOAD_VERTICAL_LAYOUT ( 1L << 4 ) +#define FT_LOAD_FORCE_AUTOHINT ( 1L << 5 ) +#define FT_LOAD_CROP_BITMAP ( 1L << 6 ) +#define FT_LOAD_PEDANTIC ( 1L << 7 ) +#define FT_LOAD_IGNORE_GLOBAL_ADVANCE_WIDTH ( 1L << 9 ) +#define FT_LOAD_NO_RECURSE ( 1L << 10 ) +#define FT_LOAD_IGNORE_TRANSFORM ( 1L << 11 ) +#define FT_LOAD_MONOCHROME ( 1L << 12 ) +#define FT_LOAD_LINEAR_DESIGN ( 1L << 13 ) +#define FT_LOAD_SBITS_ONLY ( 1L << 14 ) +#define FT_LOAD_NO_AUTOHINT ( 1L << 15 ) + /* Bits 16-19 are used by `FT_LOAD_TARGET_` */ +#define FT_LOAD_COLOR ( 1L << 20 ) +#define FT_LOAD_COMPUTE_METRICS ( 1L << 21 ) +#define FT_LOAD_BITMAP_METRICS_ONLY ( 1L << 22 ) +#define FT_LOAD_NO_SVG ( 1L << 24 ) + + /* */ + + /* used internally only by certain font drivers */ +#define FT_LOAD_ADVANCE_ONLY ( 1L << 8 ) +#define FT_LOAD_SVG_ONLY ( 1L << 23 ) + + + /************************************************************************** + * + * @enum: + * FT_LOAD_TARGET_XXX + * + * @description: + * A list of values to select a specific hinting algorithm for the + * hinter. You should OR one of these values to your `load_flags` when + * calling @FT_Load_Glyph. + * + * Note that a font's native hinters may ignore the hinting algorithm you + * have specified (e.g., the TrueType bytecode interpreter). You can set + * @FT_LOAD_FORCE_AUTOHINT to ensure that the auto-hinter is used. + * + * @values: + * FT_LOAD_TARGET_NORMAL :: + * The default hinting algorithm, optimized for standard gray-level + * rendering. For monochrome output, use @FT_LOAD_TARGET_MONO instead. + * + * FT_LOAD_TARGET_LIGHT :: + * A lighter hinting algorithm for gray-level modes. Many generated + * glyphs are fuzzier but better resemble their original shape. This + * is achieved by snapping glyphs to the pixel grid only vertically + * (Y-axis), as is done by FreeType's new CFF engine or Microsoft's + * ClearType font renderer. This preserves inter-glyph spacing in + * horizontal text. The snapping is done either by the native font + * driver, if the driver itself and the font support it, or by the + * auto-hinter. + * + * Advance widths are rounded to integer values; however, using the + * `lsb_delta` and `rsb_delta` fields of @FT_GlyphSlotRec, it is + * possible to get fractional advance widths for subpixel positioning + * (which is recommended to use). + * + * If configuration option `AF_CONFIG_OPTION_TT_SIZE_METRICS` is + * active, TrueType-like metrics are used to make this mode behave + * similarly as in unpatched FreeType versions between 2.4.6 and 2.7.1 + * (inclusive). + * + * FT_LOAD_TARGET_MONO :: + * Strong hinting algorithm that should only be used for monochrome + * output. The result is probably unpleasant if the glyph is rendered + * in non-monochrome modes. + * + * Note that for outline fonts only the TrueType font driver has proper + * monochrome hinting support, provided the TTFs contain hints for B/W + * rendering (which most fonts no longer provide). If these conditions + * are not met it is very likely that you get ugly results at smaller + * sizes. + * + * FT_LOAD_TARGET_LCD :: + * A variant of @FT_LOAD_TARGET_LIGHT optimized for horizontally + * decimated LCD displays. + * + * FT_LOAD_TARGET_LCD_V :: + * A variant of @FT_LOAD_TARGET_NORMAL optimized for vertically + * decimated LCD displays. + * + * @note: + * You should use only _one_ of the `FT_LOAD_TARGET_XXX` values in your + * `load_flags`. They can't be ORed. + * + * If @FT_LOAD_RENDER is also set, the glyph is rendered in the + * corresponding mode (i.e., the mode that matches the used algorithm + * best). An exception is `FT_LOAD_TARGET_MONO` since it implies + * @FT_LOAD_MONOCHROME. + * + * You can use a hinting algorithm that doesn't correspond to the same + * rendering mode. As an example, it is possible to use the 'light' + * hinting algorithm and have the results rendered in horizontal LCD + * pixel mode, with code like + * + * ``` + * FT_Load_Glyph( face, glyph_index, + * load_flags | FT_LOAD_TARGET_LIGHT ); + * + * FT_Render_Glyph( face->glyph, FT_RENDER_MODE_LCD ); + * ``` + * + * In general, you should stick with one rendering mode. For example, + * switching between @FT_LOAD_TARGET_NORMAL and @FT_LOAD_TARGET_MONO + * enforces a lot of recomputation for TrueType fonts, which is slow. + * Another reason is caching: Selecting a different mode usually causes + * changes in both the outlines and the rasterized bitmaps; it is thus + * necessary to empty the cache after a mode switch to avoid false hits. + * + */ +#define FT_LOAD_TARGET_( x ) ( FT_STATIC_CAST( FT_Int32, (x) & 15 ) << 16 ) + +#define FT_LOAD_TARGET_NORMAL FT_LOAD_TARGET_( FT_RENDER_MODE_NORMAL ) +#define FT_LOAD_TARGET_LIGHT FT_LOAD_TARGET_( FT_RENDER_MODE_LIGHT ) +#define FT_LOAD_TARGET_MONO FT_LOAD_TARGET_( FT_RENDER_MODE_MONO ) +#define FT_LOAD_TARGET_LCD FT_LOAD_TARGET_( FT_RENDER_MODE_LCD ) +#define FT_LOAD_TARGET_LCD_V FT_LOAD_TARGET_( FT_RENDER_MODE_LCD_V ) + + + /************************************************************************** + * + * @macro: + * FT_LOAD_TARGET_MODE + * + * @description: + * Return the @FT_Render_Mode corresponding to a given + * @FT_LOAD_TARGET_XXX value. + * + */ +#define FT_LOAD_TARGET_MODE( x ) \ + FT_STATIC_CAST( FT_Render_Mode, ( (x) >> 16 ) & 15 ) + + + /************************************************************************** + * + * @section: + * sizing_and_scaling + * + */ + + /************************************************************************** + * + * @function: + * FT_Set_Transform + * + * @description: + * Set the transformation that is applied to glyph images when they are + * loaded into a glyph slot through @FT_Load_Glyph. + * + * @inout: + * face :: + * A handle to the source face object. + * + * @input: + * matrix :: + * A pointer to the transformation's 2x2 matrix. Use `NULL` for the + * identity matrix. + * delta :: + * A pointer to the translation vector. Use `NULL` for the null + * vector. + * + * @note: + * This function is provided as a convenience, but keep in mind that + * @FT_Matrix coefficients are only 16.16 fixed-point values, which can + * limit the accuracy of the results. Using floating-point computations + * to perform the transform directly in client code instead will always + * yield better numbers. + * + * The transformation is only applied to scalable image formats after the + * glyph has been loaded. It means that hinting is unaltered by the + * transformation and is performed on the character size given in the + * last call to @FT_Set_Char_Size or @FT_Set_Pixel_Sizes. + * + * Note that this also transforms the `face.glyph.advance` field, but + * **not** the values in `face.glyph.metrics`. + */ + FT_EXPORT( void ) + FT_Set_Transform( FT_Face face, + FT_Matrix* matrix, + FT_Vector* delta ); + + + /************************************************************************** + * + * @function: + * FT_Get_Transform + * + * @description: + * Return the transformation that is applied to glyph images when they + * are loaded into a glyph slot through @FT_Load_Glyph. See + * @FT_Set_Transform for more details. + * + * @input: + * face :: + * A handle to the source face object. + * + * @output: + * matrix :: + * A pointer to a transformation's 2x2 matrix. Set this to NULL if you + * are not interested in the value. + * + * delta :: + * A pointer to a translation vector. Set this to NULL if you are not + * interested in the value. + * + * @since: + * 2.11 + * + */ + FT_EXPORT( void ) + FT_Get_Transform( FT_Face face, + FT_Matrix* matrix, + FT_Vector* delta ); + + + /************************************************************************** + * + * @section: + * glyph_retrieval + * + */ + + /************************************************************************** + * + * @enum: + * FT_Render_Mode + * + * @description: + * Render modes supported by FreeType~2. Each mode corresponds to a + * specific type of scanline conversion performed on the outline. + * + * For bitmap fonts and embedded bitmaps the `bitmap->pixel_mode` field + * in the @FT_GlyphSlotRec structure gives the format of the returned + * bitmap. + * + * All modes except @FT_RENDER_MODE_MONO use 256 levels of opacity, + * indicating pixel coverage. Use linear alpha blending and gamma + * correction to correctly render non-monochrome glyph bitmaps onto a + * surface; see @FT_Render_Glyph. + * + * The @FT_RENDER_MODE_SDF is a special render mode that uses up to 256 + * distance values, indicating the signed distance from the grid position + * to the nearest outline. + * + * @values: + * FT_RENDER_MODE_NORMAL :: + * Default render mode; it corresponds to 8-bit anti-aliased bitmaps. + * + * FT_RENDER_MODE_LIGHT :: + * This is equivalent to @FT_RENDER_MODE_NORMAL. It is only defined as + * a separate value because render modes are also used indirectly to + * define hinting algorithm selectors. See @FT_LOAD_TARGET_XXX for + * details. + * + * FT_RENDER_MODE_MONO :: + * This mode corresponds to 1-bit bitmaps (with 2~levels of opacity). + * + * FT_RENDER_MODE_LCD :: + * This mode corresponds to horizontal RGB and BGR subpixel displays + * like LCD screens. It produces 8-bit bitmaps that are 3~times the + * width of the original glyph outline in pixels, and which use the + * @FT_PIXEL_MODE_LCD mode. + * + * FT_RENDER_MODE_LCD_V :: + * This mode corresponds to vertical RGB and BGR subpixel displays + * (like PDA screens, rotated LCD displays, etc.). It produces 8-bit + * bitmaps that are 3~times the height of the original glyph outline in + * pixels and use the @FT_PIXEL_MODE_LCD_V mode. + * + * FT_RENDER_MODE_SDF :: + * The positive (unsigned) 8-bit bitmap values can be converted to the + * single-channel signed distance field (SDF) by subtracting 128, with + * the positive and negative results corresponding to the inside and + * the outside of a glyph contour, respectively. The distance units are + * arbitrarily determined by an adjustable @spread property. + * + * @note: + * The selected render mode only affects scalable vector glyphs of a font. + * Embedded bitmaps often have a different pixel mode like + * @FT_PIXEL_MODE_MONO. You can use @FT_Bitmap_Convert to transform them + * into 8-bit pixmaps. + * + */ + typedef enum FT_Render_Mode_ + { + FT_RENDER_MODE_NORMAL = 0, + FT_RENDER_MODE_LIGHT, + FT_RENDER_MODE_MONO, + FT_RENDER_MODE_LCD, + FT_RENDER_MODE_LCD_V, + FT_RENDER_MODE_SDF, + + FT_RENDER_MODE_MAX + + } FT_Render_Mode; + + + /* these constants are deprecated; use the corresponding */ + /* `FT_Render_Mode` values instead */ +#define ft_render_mode_normal FT_RENDER_MODE_NORMAL +#define ft_render_mode_mono FT_RENDER_MODE_MONO + + + /************************************************************************** + * + * @function: + * FT_Render_Glyph + * + * @description: + * Convert a given glyph image to a bitmap. It does so by inspecting the + * glyph image format, finding the relevant renderer, and invoking it. + * + * @inout: + * slot :: + * A handle to the glyph slot containing the image to convert. + * + * @input: + * render_mode :: + * The render mode used to render the glyph image into a bitmap. See + * @FT_Render_Mode for a list of possible values. + * + * If @FT_RENDER_MODE_NORMAL is used, a previous call of @FT_Load_Glyph + * with flag @FT_LOAD_COLOR makes `FT_Render_Glyph` provide a default + * blending of colored glyph layers associated with the current glyph + * slot (provided the font contains such layers) instead of rendering + * the glyph slot's outline. This is an experimental feature; see + * @FT_LOAD_COLOR for more information. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * When FreeType outputs a bitmap of a glyph, it really outputs an alpha + * coverage map. If a pixel is completely covered by a filled-in + * outline, the bitmap contains 0xFF at that pixel, meaning that + * 0xFF/0xFF fraction of that pixel is covered, meaning the pixel is 100% + * black (or 0% bright). If a pixel is only 50% covered (value 0x80), + * the pixel is made 50% black (50% bright or a middle shade of grey). + * 0% covered means 0% black (100% bright or white). + * + * On high-DPI screens like on smartphones and tablets, the pixels are so + * small that their chance of being completely covered and therefore + * completely black are fairly good. On the low-DPI screens, however, + * the situation is different. The pixels are too large for most of the + * details of a glyph and shades of gray are the norm rather than the + * exception. + * + * This is relevant because all our screens have a second problem: they + * are not linear. 1~+~1 is not~2. Twice the value does not result in + * twice the brightness. When a pixel is only 50% covered, the coverage + * map says 50% black, and this translates to a pixel value of 128 when + * you use 8~bits per channel (0-255). However, this does not translate + * to 50% brightness for that pixel on our sRGB and gamma~2.2 screens. + * Due to their non-linearity, they dwell longer in the darks and only a + * pixel value of about 186 results in 50% brightness -- 128 ends up too + * dark on both bright and dark backgrounds. The net result is that dark + * text looks burnt-out, pixely and blotchy on bright background, bright + * text too frail on dark backgrounds, and colored text on colored + * background (for example, red on green) seems to have dark halos or + * 'dirt' around it. The situation is especially ugly for diagonal stems + * like in 'w' glyph shapes where the quality of FreeType's anti-aliasing + * depends on the correct display of grays. On high-DPI screens where + * smaller, fully black pixels reign supreme, this doesn't matter, but on + * our low-DPI screens with all the gray shades, it does. 0% and 100% + * brightness are the same things in linear and non-linear space, just + * all the shades in-between aren't. + * + * The blending function for placing text over a background is + * + * ``` + * dst = alpha * src + (1 - alpha) * dst , + * ``` + * + * which is known as the OVER operator. + * + * To correctly composite an anti-aliased pixel of a glyph onto a + * surface, + * + * 1. take the foreground and background colors (e.g., in sRGB space) + * and apply gamma to get them in a linear space, + * + * 2. use OVER to blend the two linear colors using the glyph pixel + * as the alpha value (remember, the glyph bitmap is an alpha coverage + * bitmap), and + * + * 3. apply inverse gamma to the blended pixel and write it back to + * the image. + * + * Internal testing at Adobe found that a target inverse gamma of~1.8 for + * step~3 gives good results across a wide range of displays with an sRGB + * gamma curve or a similar one. + * + * This process can cost performance. There is an approximation that + * does not need to know about the background color; see + * https://web.archive.org/web/20211019204945/https://bel.fi/alankila/lcd/ + * and + * https://web.archive.org/web/20210211002939/https://bel.fi/alankila/lcd/alpcor.html + * for details. + * + * **ATTENTION**: Linear blending is even more important when dealing + * with subpixel-rendered glyphs to prevent color-fringing! A + * subpixel-rendered glyph must first be filtered with a filter that + * gives equal weight to the three color primaries and does not exceed a + * sum of 0x100, see section @lcd_rendering. Then the only difference to + * gray linear blending is that subpixel-rendered linear blending is done + * 3~times per pixel: red foreground subpixel to red background subpixel + * and so on for green and blue. + */ + FT_EXPORT( FT_Error ) + FT_Render_Glyph( FT_GlyphSlot slot, + FT_Render_Mode render_mode ); + + + /************************************************************************** + * + * @enum: + * FT_Kerning_Mode + * + * @description: + * An enumeration to specify the format of kerning values returned by + * @FT_Get_Kerning. + * + * @values: + * FT_KERNING_DEFAULT :: + * Return grid-fitted kerning distances in 26.6 fractional pixels. + * + * FT_KERNING_UNFITTED :: + * Return un-grid-fitted kerning distances in 26.6 fractional pixels. + * + * FT_KERNING_UNSCALED :: + * Return the kerning vector in original font units. + * + * @note: + * `FT_KERNING_DEFAULT` returns full pixel values; it also makes FreeType + * heuristically scale down kerning distances at small ppem values so + * that they don't become too big. + * + * Both `FT_KERNING_DEFAULT` and `FT_KERNING_UNFITTED` use the current + * horizontal scaling factor (as set e.g. with @FT_Set_Char_Size) to + * convert font units to pixels. + */ + typedef enum FT_Kerning_Mode_ + { + FT_KERNING_DEFAULT = 0, + FT_KERNING_UNFITTED, + FT_KERNING_UNSCALED + + } FT_Kerning_Mode; + + + /* these constants are deprecated; use the corresponding */ + /* `FT_Kerning_Mode` values instead */ +#define ft_kerning_default FT_KERNING_DEFAULT +#define ft_kerning_unfitted FT_KERNING_UNFITTED +#define ft_kerning_unscaled FT_KERNING_UNSCALED + + + /************************************************************************** + * + * @function: + * FT_Get_Kerning + * + * @description: + * Return the kerning vector between two glyphs of the same face. + * + * @input: + * face :: + * A handle to a source face object. + * + * left_glyph :: + * The index of the left glyph in the kern pair. + * + * right_glyph :: + * The index of the right glyph in the kern pair. + * + * kern_mode :: + * See @FT_Kerning_Mode for more information. Determines the scale and + * dimension of the returned kerning vector. + * + * @output: + * akerning :: + * The kerning vector. This is either in font units, fractional pixels + * (26.6 format), or pixels for scalable formats, and in pixels for + * fixed-sizes formats. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * Only horizontal layouts (left-to-right & right-to-left) are supported + * by this method. Other layouts, or more sophisticated kernings, are + * out of the scope of this API function -- they can be implemented + * through format-specific interfaces. + * + * Note that, for TrueType fonts only, this can extract data from both + * the 'kern' table and the basic, pair-wise kerning feature from the + * GPOS table (with `TT_CONFIG_OPTION_GPOS_KERNING` enabled), though + * FreeType does not support the more advanced GPOS layout features; use + * a library like HarfBuzz for those instead. If a font has both a + * 'kern' table and kern features of a GPOS table, the 'kern' table will + * be used. + * + * Also note for right-to-left scripts, the functionality may differ for + * fonts with GPOS tables vs. 'kern' tables. For GPOS, right-to-left + * fonts typically use both a placement offset and an advance for pair + * positioning, which this API does not support, so it would output + * kerning values of zero; though if the right-to-left font used only + * advances in GPOS pair positioning, then this API could output kerning + * values for it, but it would use `left_glyph` to mean the first glyph + * for that case. Whereas 'kern' tables are always advance-only and + * always store the left glyph first. + * + * Use @FT_HAS_KERNING to find out whether a font has data that can be + * extracted with `FT_Get_Kerning`. + */ + FT_EXPORT( FT_Error ) + FT_Get_Kerning( FT_Face face, + FT_UInt left_glyph, + FT_UInt right_glyph, + FT_UInt kern_mode, + FT_Vector *akerning ); + + + /************************************************************************** + * + * @function: + * FT_Get_Track_Kerning + * + * @description: + * Return the track kerning for a given face object at a given size. + * + * @input: + * face :: + * A handle to a source face object. + * + * point_size :: + * The point size in 16.16 fractional points. + * + * degree :: + * The degree of tightness. Increasingly negative values represent + * tighter track kerning, while increasingly positive values represent + * looser track kerning. Value zero means no track kerning. + * + * @output: + * akerning :: + * The kerning in 16.16 fractional points, to be uniformly applied + * between all glyphs. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * Currently, only the Type~1 font driver supports track kerning, using + * data from AFM files (if attached with @FT_Attach_File or + * @FT_Attach_Stream). + * + * Only very few AFM files come with track kerning data; please refer to + * Adobe's AFM specification for more details. + */ + FT_EXPORT( FT_Error ) + FT_Get_Track_Kerning( FT_Face face, + FT_Fixed point_size, + FT_Int degree, + FT_Fixed* akerning ); + + + /************************************************************************** + * + * @section: + * character_mapping + * + */ + + /************************************************************************** + * + * @function: + * FT_Select_Charmap + * + * @description: + * Select a given charmap by its encoding tag (as listed in + * `freetype.h`). + * + * @inout: + * face :: + * A handle to the source face object. + * + * @input: + * encoding :: + * A handle to the selected encoding. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * This function returns an error if no charmap in the face corresponds + * to the encoding queried here. + * + * Because many fonts contain more than a single cmap for Unicode + * encoding, this function has some special code to select the one that + * covers Unicode best ('best' in the sense that a UCS-4 cmap is + * preferred to a UCS-2 cmap). It is thus preferable to @FT_Set_Charmap + * in this case. + */ + FT_EXPORT( FT_Error ) + FT_Select_Charmap( FT_Face face, + FT_Encoding encoding ); + + + /************************************************************************** + * + * @function: + * FT_Set_Charmap + * + * @description: + * Select a given charmap for character code to glyph index mapping. + * + * @inout: + * face :: + * A handle to the source face object. + * + * @input: + * charmap :: + * A handle to the selected charmap. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * This function returns an error if the charmap is not part of the face + * (i.e., if it is not listed in the `face->charmaps` table). + * + * It also fails if an OpenType type~14 charmap is selected (which + * doesn't map character codes to glyph indices at all). + */ + FT_EXPORT( FT_Error ) + FT_Set_Charmap( FT_Face face, + FT_CharMap charmap ); + + + /************************************************************************** + * + * @function: + * FT_Get_Charmap_Index + * + * @description: + * Retrieve index of a given charmap. + * + * @input: + * charmap :: + * A handle to a charmap. + * + * @return: + * The index into the array of character maps within the face to which + * `charmap` belongs. If an error occurs, -1 is returned. + * + */ + FT_EXPORT( FT_Int ) + FT_Get_Charmap_Index( FT_CharMap charmap ); + + + /************************************************************************** + * + * @function: + * FT_Get_Char_Index + * + * @description: + * Return the glyph index of a given character code. This function uses + * the currently selected charmap to do the mapping. + * + * @input: + * face :: + * A handle to the source face object. + * + * charcode :: + * The character code. + * + * @return: + * The glyph index. 0~means 'undefined character code'. + * + * @note: + * If you use FreeType to manipulate the contents of font files directly, + * be aware that the glyph index returned by this function doesn't always + * correspond to the internal indices used within the file. This is done + * to ensure that value~0 always corresponds to the 'missing glyph'. If + * the first glyph is not named '.notdef', then for Type~1 and Type~42 + * fonts, '.notdef' will be moved into the glyph ID~0 position, and + * whatever was there will be moved to the position '.notdef' had. For + * Type~1 fonts, if there is no '.notdef' glyph at all, then one will be + * created at index~0 and whatever was there will be moved to the last + * index -- Type~42 fonts are considered invalid under this condition. + */ + FT_EXPORT( FT_UInt ) + FT_Get_Char_Index( FT_Face face, + FT_ULong charcode ); + + + /************************************************************************** + * + * @function: + * FT_Get_First_Char + * + * @description: + * Return the first character code in the current charmap of a given + * face, together with its corresponding glyph index. + * + * @input: + * face :: + * A handle to the source face object. + * + * @output: + * agindex :: + * Glyph index of first character code. 0~if charmap is empty. + * + * @return: + * The charmap's first character code. + * + * @note: + * You should use this function together with @FT_Get_Next_Char to parse + * all character codes available in a given charmap. The code should + * look like this: + * + * ``` + * FT_ULong charcode; + * FT_UInt gindex; + * + * + * charcode = FT_Get_First_Char( face, &gindex ); + * while ( gindex != 0 ) + * { + * ... do something with (charcode,gindex) pair ... + * + * charcode = FT_Get_Next_Char( face, charcode, &gindex ); + * } + * ``` + * + * Be aware that character codes can have values up to 0xFFFFFFFF; this + * might happen for non-Unicode or malformed cmaps. However, even with + * regular Unicode encoding, so-called 'last resort fonts' (using SFNT + * cmap format 13, see function @FT_Get_CMap_Format) normally have + * entries for all Unicode characters up to 0x1FFFFF, which can cause *a + * lot* of iterations. + * + * Note that `*agindex` is set to~0 if the charmap is empty. The result + * itself can be~0 in two cases: if the charmap is empty or if the + * value~0 is the first valid character code. + */ + FT_EXPORT( FT_ULong ) + FT_Get_First_Char( FT_Face face, + FT_UInt *agindex ); + + + /************************************************************************** + * + * @function: + * FT_Get_Next_Char + * + * @description: + * Return the next character code in the current charmap of a given face + * following the value `char_code`, as well as the corresponding glyph + * index. + * + * @input: + * face :: + * A handle to the source face object. + * + * char_code :: + * The starting character code. + * + * @output: + * agindex :: + * Glyph index of next character code. 0~if charmap is empty. + * + * @return: + * The charmap's next character code. + * + * @note: + * You should use this function with @FT_Get_First_Char to walk over all + * character codes available in a given charmap. See the note for that + * function for a simple code example. + * + * Note that `*agindex` is set to~0 when there are no more codes in the + * charmap. + */ + FT_EXPORT( FT_ULong ) + FT_Get_Next_Char( FT_Face face, + FT_ULong char_code, + FT_UInt *agindex ); + + + /************************************************************************** + * + * @section: + * face_creation + * + */ + + /************************************************************************** + * + * @function: + * FT_Face_Properties + * + * @description: + * Set or override certain (library or module-wide) properties on a + * face-by-face basis. Useful for finer-grained control and avoiding + * locks on shared structures (threads can modify their own faces as they + * see fit). + * + * Contrary to @FT_Property_Set, this function uses @FT_Parameter so that + * you can pass multiple properties to the target face in one call. Note + * that only a subset of the available properties can be controlled. + * + * * @FT_PARAM_TAG_STEM_DARKENING (stem darkening, corresponding to the + * property `no-stem-darkening` provided by the 'autofit', 'cff', + * 'type1', and 't1cid' modules; see @no-stem-darkening). + * + * * @FT_PARAM_TAG_LCD_FILTER_WEIGHTS (LCD filter weights, corresponding + * to function @FT_Library_SetLcdFilterWeights). + * + * * @FT_PARAM_TAG_RANDOM_SEED (seed value for the CFF, Type~1, and CID + * 'random' operator, corresponding to the `random-seed` property + * provided by the 'cff', 'type1', and 't1cid' modules; see + * @random-seed). + * + * Pass `NULL` as `data` in @FT_Parameter for a given tag to reset the + * option and use the library or module default again. + * + * @input: + * face :: + * A handle to the source face object. + * + * num_properties :: + * The number of properties that follow. + * + * properties :: + * A handle to an @FT_Parameter array with `num_properties` elements. + * + * @return: + * FreeType error code. 0~means success. + * + * @example: + * Here is an example that sets three properties. You must define + * `FT_CONFIG_OPTION_SUBPIXEL_RENDERING` to make the LCD filter examples + * work. + * + * ``` + * FT_Parameter property1; + * FT_Bool darken_stems = 1; + * + * FT_Parameter property2; + * FT_LcdFiveTapFilter custom_weight = + * { 0x11, 0x44, 0x56, 0x44, 0x11 }; + * + * FT_Parameter property3; + * FT_Int32 random_seed = 314159265; + * + * FT_Parameter properties[3] = { property1, + * property2, + * property3 }; + * + * + * property1.tag = FT_PARAM_TAG_STEM_DARKENING; + * property1.data = &darken_stems; + * + * property2.tag = FT_PARAM_TAG_LCD_FILTER_WEIGHTS; + * property2.data = custom_weight; + * + * property3.tag = FT_PARAM_TAG_RANDOM_SEED; + * property3.data = &random_seed; + * + * FT_Face_Properties( face, 3, properties ); + * ``` + * + * The next example resets a single property to its default value. + * + * ``` + * FT_Parameter property; + * + * + * property.tag = FT_PARAM_TAG_LCD_FILTER_WEIGHTS; + * property.data = NULL; + * + * FT_Face_Properties( face, 1, &property ); + * ``` + * + * @since: + * 2.8 + * + */ + FT_EXPORT( FT_Error ) + FT_Face_Properties( FT_Face face, + FT_UInt num_properties, + FT_Parameter* properties ); + + + /************************************************************************** + * + * @section: + * information_retrieval + * + */ + + /************************************************************************** + * + * @function: + * FT_Get_Name_Index + * + * @description: + * Return the glyph index of a given glyph name. This only works + * for those faces where @FT_HAS_GLYPH_NAMES returns true. + * + * @input: + * face :: + * A handle to the source face object. + * + * glyph_name :: + * The glyph name. + * + * @return: + * The glyph index. 0~means 'undefined character code'. + * + * @note: + * Acceptable glyph names might come from the [Adobe Glyph + * List](https://github.com/adobe-type-tools/agl-aglfn). See + * @FT_Get_Glyph_Name for the inverse functionality. + * + * This function has limited capabilities if the config macro + * `FT_CONFIG_OPTION_POSTSCRIPT_NAMES` is not defined in `ftoption.h`: + * It then works only for fonts that actually embed glyph names (which + * many recent OpenType fonts do not). + */ + FT_EXPORT( FT_UInt ) + FT_Get_Name_Index( FT_Face face, + const FT_String* glyph_name ); + + + /************************************************************************** + * + * @function: + * FT_Get_Glyph_Name + * + * @description: + * Retrieve the ASCII name of a given glyph in a face. This only works + * for those faces where @FT_HAS_GLYPH_NAMES returns true. + * + * @input: + * face :: + * A handle to a source face object. + * + * glyph_index :: + * The glyph index. + * + * buffer_max :: + * The maximum number of bytes available in the buffer. + * + * @output: + * buffer :: + * A pointer to a target buffer where the name is copied to. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * An error is returned if the face doesn't provide glyph names or if the + * glyph index is invalid. In all cases of failure, the first byte of + * `buffer` is set to~0 to indicate an empty name. + * + * The glyph name is truncated to fit within the buffer if it is too + * long. The returned string is always zero-terminated. + * + * Be aware that FreeType reorders glyph indices internally so that glyph + * index~0 always corresponds to the 'missing glyph' (called '.notdef'). + * + * This function has limited capabilities if the config macro + * `FT_CONFIG_OPTION_POSTSCRIPT_NAMES` is not defined in `ftoption.h`: + * It then works only for fonts that actually embed glyph names (which + * many recent OpenType fonts do not). + */ + FT_EXPORT( FT_Error ) + FT_Get_Glyph_Name( FT_Face face, + FT_UInt glyph_index, + FT_Pointer buffer, + FT_UInt buffer_max ); + + + /************************************************************************** + * + * @function: + * FT_Get_Postscript_Name + * + * @description: + * Retrieve the ASCII PostScript name of a given face, if available. + * This only works with PostScript, TrueType, and OpenType fonts. + * + * @input: + * face :: + * A handle to the source face object. + * + * @return: + * A pointer to the face's PostScript name. `NULL` if unavailable. + * + * @note: + * The returned pointer is owned by the face and is destroyed with it. + * + * For variation fonts, this string changes if you select a different + * instance, and you have to call `FT_Get_PostScript_Name` again to + * retrieve it. FreeType follows Adobe TechNote #5902, 'Generating + * PostScript Names for Fonts Using OpenType Font Variations'. + * + * https://download.macromedia.com/pub/developer/opentype/tech-notes/5902.AdobePSNameGeneration.html + * + * [Since 2.9] Special PostScript names for named instances are only + * returned if the named instance is set with @FT_Set_Named_Instance (and + * the font has corresponding entries in its 'fvar' table or is the + * default named instance). If @FT_IS_VARIATION returns true, the + * algorithmically derived PostScript name is provided, not looking up + * special entries for named instances. + */ + FT_EXPORT( const char* ) + FT_Get_Postscript_Name( FT_Face face ); + + + /************************************************************************** + * + * @enum: + * FT_SUBGLYPH_FLAG_XXX + * + * @description: + * A list of constants describing subglyphs. Please refer to the 'glyf' + * table description in the OpenType specification for the meaning of the + * various flags (which get synthesized for non-OpenType subglyphs). + * + * https://learn.microsoft.com/typography/opentype/spec/glyf#composite-glyph-description + * + * @values: + * FT_SUBGLYPH_FLAG_ARGS_ARE_WORDS :: + * FT_SUBGLYPH_FLAG_ARGS_ARE_XY_VALUES :: + * FT_SUBGLYPH_FLAG_ROUND_XY_TO_GRID :: + * FT_SUBGLYPH_FLAG_SCALE :: + * FT_SUBGLYPH_FLAG_XY_SCALE :: + * FT_SUBGLYPH_FLAG_2X2 :: + * FT_SUBGLYPH_FLAG_USE_MY_METRICS :: + * + */ +#define FT_SUBGLYPH_FLAG_ARGS_ARE_WORDS 1 +#define FT_SUBGLYPH_FLAG_ARGS_ARE_XY_VALUES 2 +#define FT_SUBGLYPH_FLAG_ROUND_XY_TO_GRID 4 +#define FT_SUBGLYPH_FLAG_SCALE 8 +#define FT_SUBGLYPH_FLAG_XY_SCALE 0x40 +#define FT_SUBGLYPH_FLAG_2X2 0x80 +#define FT_SUBGLYPH_FLAG_USE_MY_METRICS 0x200 + + + /************************************************************************** + * + * @function: + * FT_Get_SubGlyph_Info + * + * @description: + * Retrieve a description of a given subglyph. Only use it if + * `glyph->format` is @FT_GLYPH_FORMAT_COMPOSITE; an error is returned + * otherwise. + * + * @input: + * glyph :: + * The source glyph slot. + * + * sub_index :: + * The index of the subglyph. Must be less than + * `glyph->num_subglyphs`. + * + * @output: + * p_index :: + * The glyph index of the subglyph. + * + * p_flags :: + * The subglyph flags, see @FT_SUBGLYPH_FLAG_XXX. + * + * p_arg1 :: + * The subglyph's first argument (if any). + * + * p_arg2 :: + * The subglyph's second argument (if any). + * + * p_transform :: + * The subglyph transformation (if any). + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * The values of `*p_arg1`, `*p_arg2`, and `*p_transform` must be + * interpreted depending on the flags returned in `*p_flags`. See the + * OpenType specification for details. + * + * https://learn.microsoft.com/typography/opentype/spec/glyf#composite-glyph-description + * + */ + FT_EXPORT( FT_Error ) + FT_Get_SubGlyph_Info( FT_GlyphSlot glyph, + FT_UInt sub_index, + FT_Int *p_index, + FT_UInt *p_flags, + FT_Int *p_arg1, + FT_Int *p_arg2, + FT_Matrix *p_transform ); + + + /************************************************************************** + * + * @enum: + * FT_FSTYPE_XXX + * + * @description: + * A list of bit flags used in the `fsType` field of the OS/2 table in a + * TrueType or OpenType font and the `FSType` entry in a PostScript font. + * These bit flags are returned by @FT_Get_FSType_Flags; they inform + * client applications of embedding and subsetting restrictions + * associated with a font. + * + * See + * https://adobe-type-tools.github.io/font-tech-notes/pdfs/AcrobatDC_FontPolicies.pdf + * for more details. + * + * @values: + * FT_FSTYPE_INSTALLABLE_EMBEDDING :: + * Fonts with no fsType bit set may be embedded and permanently + * installed on the remote system by an application. + * + * FT_FSTYPE_RESTRICTED_LICENSE_EMBEDDING :: + * Fonts that have only this bit set must not be modified, embedded or + * exchanged in any manner without first obtaining permission of the + * font software copyright owner. + * + * FT_FSTYPE_PREVIEW_AND_PRINT_EMBEDDING :: + * The font may be embedded and temporarily loaded on the remote + * system. Documents containing Preview & Print fonts must be opened + * 'read-only'; no edits can be applied to the document. + * + * FT_FSTYPE_EDITABLE_EMBEDDING :: + * The font may be embedded but must only be installed temporarily on + * other systems. In contrast to Preview & Print fonts, documents + * containing editable fonts may be opened for reading, editing is + * permitted, and changes may be saved. + * + * FT_FSTYPE_NO_SUBSETTING :: + * The font may not be subsetted prior to embedding. + * + * FT_FSTYPE_BITMAP_EMBEDDING_ONLY :: + * Only bitmaps contained in the font may be embedded; no outline data + * may be embedded. If there are no bitmaps available in the font, + * then the font is unembeddable. + * + * @note: + * The flags are ORed together, thus more than a single value can be + * returned. + * + * While the `fsType` flags can indicate that a font may be embedded, a + * license with the font vendor may be separately required to use the + * font in this way. + */ +#define FT_FSTYPE_INSTALLABLE_EMBEDDING 0x0000 +#define FT_FSTYPE_RESTRICTED_LICENSE_EMBEDDING 0x0002 +#define FT_FSTYPE_PREVIEW_AND_PRINT_EMBEDDING 0x0004 +#define FT_FSTYPE_EDITABLE_EMBEDDING 0x0008 +#define FT_FSTYPE_NO_SUBSETTING 0x0100 +#define FT_FSTYPE_BITMAP_EMBEDDING_ONLY 0x0200 + + + /************************************************************************** + * + * @function: + * FT_Get_FSType_Flags + * + * @description: + * Return the `fsType` flags for a font. + * + * @input: + * face :: + * A handle to the source face object. + * + * @return: + * The `fsType` flags, see @FT_FSTYPE_XXX. + * + * @note: + * Use this function rather than directly reading the `fs_type` field in + * the @PS_FontInfoRec structure, which is only guaranteed to return the + * correct results for Type~1 fonts. + * + * @since: + * 2.3.8 + * + */ + FT_EXPORT( FT_UShort ) + FT_Get_FSType_Flags( FT_Face face ); + + + /************************************************************************** + * + * @section: + * glyph_variants + * + * @title: + * Unicode Variation Sequences + * + * @abstract: + * The FreeType~2 interface to Unicode Variation Sequences (UVS), using + * the SFNT cmap format~14. + * + * @description: + * Many characters, especially for CJK scripts, have variant forms. They + * are a sort of grey area somewhere between being totally irrelevant and + * semantically distinct; for this reason, the Unicode consortium decided + * to introduce Variation Sequences (VS), consisting of a Unicode base + * character and a variation selector instead of further extending the + * already huge number of characters. + * + * Unicode maintains two different sets, namely 'Standardized Variation + * Sequences' and registered 'Ideographic Variation Sequences' (IVS), + * collected in the 'Ideographic Variation Database' (IVD). + * + * https://unicode.org/Public/UCD/latest/ucd/StandardizedVariants.txt + * https://unicode.org/reports/tr37/ https://unicode.org/ivd/ + * + * To date (January 2017), the character with the most ideographic + * variations is U+9089, having 32 such IVS. + * + * Three Mongolian Variation Selectors have the values U+180B-U+180D; 256 + * generic Variation Selectors are encoded in the ranges U+FE00-U+FE0F + * and U+E0100-U+E01EF. IVS currently use Variation Selectors from the + * range U+E0100-U+E01EF only. + * + * A VS consists of the base character value followed by a single + * Variation Selector. For example, to get the first variation of + * U+9089, you have to write the character sequence `U+9089 U+E0100`. + * + * Adobe and MS decided to support both standardized and ideographic VS + * with a new cmap subtable (format~14). It is an odd subtable because + * it is not a mapping of input code points to glyphs, but contains lists + * of all variations supported by the font. + * + * A variation may be either 'default' or 'non-default' for a given font. + * A default variation is the one you will get for that code point if you + * look it up in the standard Unicode cmap. A non-default variation is a + * different glyph. + * + */ + + + /************************************************************************** + * + * @function: + * FT_Face_GetCharVariantIndex + * + * @description: + * Return the glyph index of a given character code as modified by the + * variation selector. + * + * @input: + * face :: + * A handle to the source face object. + * + * charcode :: + * The character code point in Unicode. + * + * variantSelector :: + * The Unicode code point of the variation selector. + * + * @return: + * The glyph index. 0~means either 'undefined character code', or + * 'undefined selector code', or 'no variation selector cmap subtable', + * or 'current CharMap is not Unicode'. + * + * @note: + * If you use FreeType to manipulate the contents of font files directly, + * be aware that the glyph index returned by this function doesn't always + * correspond to the internal indices used within the file. This is done + * to ensure that value~0 always corresponds to the 'missing glyph'. + * + * This function is only meaningful if + * a) the font has a variation selector cmap sub table, and + * b) the current charmap has a Unicode encoding. + * + * @since: + * 2.3.6 + * + */ + FT_EXPORT( FT_UInt ) + FT_Face_GetCharVariantIndex( FT_Face face, + FT_ULong charcode, + FT_ULong variantSelector ); + + + /************************************************************************** + * + * @function: + * FT_Face_GetCharVariantIsDefault + * + * @description: + * Check whether this variation of this Unicode character is the one to + * be found in the charmap. + * + * @input: + * face :: + * A handle to the source face object. + * + * charcode :: + * The character codepoint in Unicode. + * + * variantSelector :: + * The Unicode codepoint of the variation selector. + * + * @return: + * 1~if found in the standard (Unicode) cmap, 0~if found in the variation + * selector cmap, or -1 if it is not a variation. + * + * @note: + * This function is only meaningful if the font has a variation selector + * cmap subtable. + * + * @since: + * 2.3.6 + * + */ + FT_EXPORT( FT_Int ) + FT_Face_GetCharVariantIsDefault( FT_Face face, + FT_ULong charcode, + FT_ULong variantSelector ); + + + /************************************************************************** + * + * @function: + * FT_Face_GetVariantSelectors + * + * @description: + * Return a zero-terminated list of Unicode variation selectors found in + * the font. + * + * @input: + * face :: + * A handle to the source face object. + * + * @return: + * A pointer to an array of selector code points, or `NULL` if there is + * no valid variation selector cmap subtable. + * + * @note: + * The last item in the array is~0; the array is owned by the @FT_Face + * object but can be overwritten or released on the next call to a + * FreeType function. + * + * @since: + * 2.3.6 + * + */ + FT_EXPORT( FT_UInt32* ) + FT_Face_GetVariantSelectors( FT_Face face ); + + + /************************************************************************** + * + * @function: + * FT_Face_GetVariantsOfChar + * + * @description: + * Return a zero-terminated list of Unicode variation selectors found for + * the specified character code. + * + * @input: + * face :: + * A handle to the source face object. + * + * charcode :: + * The character codepoint in Unicode. + * + * @return: + * A pointer to an array of variation selector code points that are + * active for the given character, or `NULL` if the corresponding list is + * empty. + * + * @note: + * The last item in the array is~0; the array is owned by the @FT_Face + * object but can be overwritten or released on the next call to a + * FreeType function. + * + * @since: + * 2.3.6 + * + */ + FT_EXPORT( FT_UInt32* ) + FT_Face_GetVariantsOfChar( FT_Face face, + FT_ULong charcode ); + + + /************************************************************************** + * + * @function: + * FT_Face_GetCharsOfVariant + * + * @description: + * Return a zero-terminated list of Unicode character codes found for the + * specified variation selector. + * + * @input: + * face :: + * A handle to the source face object. + * + * variantSelector :: + * The variation selector code point in Unicode. + * + * @return: + * A list of all the code points that are specified by this selector + * (both default and non-default codes are returned) or `NULL` if there + * is no valid cmap or the variation selector is invalid. + * + * @note: + * The last item in the array is~0; the array is owned by the @FT_Face + * object but can be overwritten or released on the next call to a + * FreeType function. + * + * @since: + * 2.3.6 + * + */ + FT_EXPORT( FT_UInt32* ) + FT_Face_GetCharsOfVariant( FT_Face face, + FT_ULong variantSelector ); + + + /************************************************************************** + * + * @section: + * computations + * + * @title: + * Computations + * + * @abstract: + * Crunching fixed numbers and vectors. + * + * @description: + * This section contains various functions used to perform computations + * on 16.16 fixed-point numbers or 2D vectors. FreeType does not use + * floating-point data types. + * + * **Attention**: Most arithmetic functions take `FT_Long` as arguments. + * For historical reasons, FreeType was designed under the assumption + * that `FT_Long` is a 32-bit integer; results can thus be undefined if + * the arguments don't fit into 32 bits. + * + * @order: + * FT_MulDiv + * FT_MulFix + * FT_DivFix + * FT_RoundFix + * FT_CeilFix + * FT_FloorFix + * FT_Vector_Transform + * FT_Matrix_Multiply + * FT_Matrix_Invert + * + */ + + + /************************************************************************** + * + * @function: + * FT_MulDiv + * + * @description: + * Compute `(a*b)/c` with maximum accuracy, using a 64-bit intermediate + * integer whenever necessary. + * + * This function isn't necessarily as fast as some processor-specific + * operations, but is at least completely portable. + * + * @input: + * a :: + * The first multiplier. + * + * b :: + * The second multiplier. + * + * c :: + * The divisor. + * + * @return: + * The result of `(a*b)/c`. This function never traps when trying to + * divide by zero; it simply returns 'MaxInt' or 'MinInt' depending on + * the signs of `a` and `b`. + */ + FT_EXPORT( FT_Long ) + FT_MulDiv( FT_Long a, + FT_Long b, + FT_Long c ); + + + /************************************************************************** + * + * @function: + * FT_MulFix + * + * @description: + * Compute `(a*b)/0x10000` with maximum accuracy. Its main use is to + * multiply a given value by a 16.16 fixed-point factor. + * + * @input: + * a :: + * The first multiplier. + * + * b :: + * The second multiplier. Use a 16.16 factor here whenever possible + * (see note below). + * + * @return: + * The result of `(a*b)/0x10000`. + * + * @note: + * This function has been optimized for the case where the absolute value + * of `a` is less than 2048, and `b` is a 16.16 scaling factor. As this + * happens mainly when scaling from notional units to fractional pixels + * in FreeType, it resulted in noticeable speed improvements between + * versions 2.x and 1.x. + * + * As a conclusion, always try to place a 16.16 factor as the _second_ + * argument of this function; this can make a great difference. + */ + FT_EXPORT( FT_Long ) + FT_MulFix( FT_Long a, + FT_Long b ); + + + /************************************************************************** + * + * @function: + * FT_DivFix + * + * @description: + * Compute `(a*0x10000)/b` with maximum accuracy. Its main use is to + * divide a given value by a 16.16 fixed-point factor. + * + * @input: + * a :: + * The numerator. + * + * b :: + * The denominator. Use a 16.16 factor here. + * + * @return: + * The result of `(a*0x10000)/b`. + */ + FT_EXPORT( FT_Long ) + FT_DivFix( FT_Long a, + FT_Long b ); + + + /************************************************************************** + * + * @function: + * FT_RoundFix + * + * @description: + * Round a 16.16 fixed number. + * + * @input: + * a :: + * The number to be rounded. + * + * @return: + * `a` rounded to the nearest 16.16 fixed integer, halfway cases away + * from zero. + * + * @note: + * The function uses wrap-around arithmetic. + */ + FT_EXPORT( FT_Fixed ) + FT_RoundFix( FT_Fixed a ); + + + /************************************************************************** + * + * @function: + * FT_CeilFix + * + * @description: + * Compute the smallest following integer of a 16.16 fixed number. + * + * @input: + * a :: + * The number for which the ceiling function is to be computed. + * + * @return: + * `a` rounded towards plus infinity. + * + * @note: + * The function uses wrap-around arithmetic. + */ + FT_EXPORT( FT_Fixed ) + FT_CeilFix( FT_Fixed a ); + + + /************************************************************************** + * + * @function: + * FT_FloorFix + * + * @description: + * Compute the largest previous integer of a 16.16 fixed number. + * + * @input: + * a :: + * The number for which the floor function is to be computed. + * + * @return: + * `a` rounded towards minus infinity. + */ + FT_EXPORT( FT_Fixed ) + FT_FloorFix( FT_Fixed a ); + + + /************************************************************************** + * + * @function: + * FT_Vector_Transform + * + * @description: + * Transform a single vector through a 2x2 matrix. + * + * @inout: + * vector :: + * The target vector to transform. + * + * @input: + * matrix :: + * A pointer to the source 2x2 matrix. + * + * @note: + * The result is undefined if either `vector` or `matrix` is invalid. + */ + FT_EXPORT( void ) + FT_Vector_Transform( FT_Vector* vector, + const FT_Matrix* matrix ); + + + /************************************************************************** + * + * @section: + * library_setup + * + */ + + /************************************************************************** + * + * @enum: + * FREETYPE_XXX + * + * @description: + * These three macros identify the FreeType source code version. Use + * @FT_Library_Version to access them at runtime. + * + * @values: + * FREETYPE_MAJOR :: + * The major version number. + * FREETYPE_MINOR :: + * The minor version number. + * FREETYPE_PATCH :: + * The patch level. + * + * @note: + * The version number of FreeType if built as a dynamic link library with + * the 'libtool' package is _not_ controlled by these three macros. + * + */ +#define FREETYPE_MAJOR 2 +#define FREETYPE_MINOR 13 +#define FREETYPE_PATCH 3 + + + /************************************************************************** + * + * @function: + * FT_Library_Version + * + * @description: + * Return the version of the FreeType library being used. This is useful + * when dynamically linking to the library, since one cannot use the + * macros @FREETYPE_MAJOR, @FREETYPE_MINOR, and @FREETYPE_PATCH. + * + * @input: + * library :: + * A source library handle. + * + * @output: + * amajor :: + * The major version number. + * + * aminor :: + * The minor version number. + * + * apatch :: + * The patch version number. + * + * @note: + * The reason why this function takes a `library` argument is because + * certain programs implement library initialization in a custom way that + * doesn't use @FT_Init_FreeType. + * + * In such cases, the library version might not be available before the + * library object has been created. + */ + FT_EXPORT( void ) + FT_Library_Version( FT_Library library, + FT_Int *amajor, + FT_Int *aminor, + FT_Int *apatch ); + + + /************************************************************************** + * + * @section: + * other_api_data + * + */ + + /************************************************************************** + * + * @function: + * FT_Face_CheckTrueTypePatents + * + * @description: + * Deprecated, does nothing. + * + * @input: + * face :: + * A face handle. + * + * @return: + * Always returns false. + * + * @note: + * Since May 2010, TrueType hinting is no longer patented. + * + * @since: + * 2.3.5 + * + */ + FT_EXPORT( FT_Bool ) + FT_Face_CheckTrueTypePatents( FT_Face face ); + + + /************************************************************************** + * + * @function: + * FT_Face_SetUnpatentedHinting + * + * @description: + * Deprecated, does nothing. + * + * @input: + * face :: + * A face handle. + * + * value :: + * New boolean setting. + * + * @return: + * Always returns false. + * + * @note: + * Since May 2010, TrueType hinting is no longer patented. + * + * @since: + * 2.3.5 + * + */ + FT_EXPORT( FT_Bool ) + FT_Face_SetUnpatentedHinting( FT_Face face, + FT_Bool value ); + + /* */ + + +FT_END_HEADER + +#endif /* FREETYPE_H_ */ + + +/* END */ diff --git a/dependencies/linux64/include/freetype2/freetype/ftadvanc.h b/dependencies/linux64/include/freetype2/freetype/ftadvanc.h new file mode 100644 index 0000000..85b8ba2 --- /dev/null +++ b/dependencies/linux64/include/freetype2/freetype/ftadvanc.h @@ -0,0 +1,188 @@ +/**************************************************************************** + * + * ftadvanc.h + * + * Quick computation of advance widths (specification only). + * + * Copyright (C) 2008-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + +#ifndef FTADVANC_H_ +#define FTADVANC_H_ + + +#include + +#ifdef FREETYPE_H +#error "freetype.h of FreeType 1 has been loaded!" +#error "Please fix the directory search order for header files" +#error "so that freetype.h of FreeType 2 is found first." +#endif + + +FT_BEGIN_HEADER + + + /************************************************************************** + * + * @section: + * quick_advance + * + * @title: + * Quick retrieval of advance values + * + * @abstract: + * Retrieve horizontal and vertical advance values without processing + * glyph outlines, if possible. + * + * @description: + * This section contains functions to quickly extract advance values + * without handling glyph outlines, if possible. + * + * @order: + * FT_Get_Advance + * FT_Get_Advances + * + */ + + + /************************************************************************** + * + * @enum: + * FT_ADVANCE_FLAG_FAST_ONLY + * + * @description: + * A bit-flag to be OR-ed with the `flags` parameter of the + * @FT_Get_Advance and @FT_Get_Advances functions. + * + * If set, it indicates that you want these functions to fail if the + * corresponding hinting mode or font driver doesn't allow for very quick + * advance computation. + * + * Typically, glyphs that are either unscaled, unhinted, bitmapped, or + * light-hinted can have their advance width computed very quickly. + * + * Normal and bytecode hinted modes that require loading, scaling, and + * hinting of the glyph outline, are extremely slow by comparison. + */ +#define FT_ADVANCE_FLAG_FAST_ONLY 0x20000000L + + + /************************************************************************** + * + * @function: + * FT_Get_Advance + * + * @description: + * Retrieve the advance value of a given glyph outline in an @FT_Face. + * + * @input: + * face :: + * The source @FT_Face handle. + * + * gindex :: + * The glyph index. + * + * load_flags :: + * A set of bit flags similar to those used when calling + * @FT_Load_Glyph, used to determine what kind of advances you need. + * + * @output: + * padvance :: + * The advance value. If scaling is performed (based on the value of + * `load_flags`), the advance value is in 16.16 format. Otherwise, it + * is in font units. + * + * If @FT_LOAD_VERTICAL_LAYOUT is set, this is the vertical advance + * corresponding to a vertical layout. Otherwise, it is the horizontal + * advance in a horizontal layout. + * + * @return: + * FreeType error code. 0 means success. + * + * @note: + * This function may fail if you use @FT_ADVANCE_FLAG_FAST_ONLY and if + * the corresponding font backend doesn't have a quick way to retrieve + * the advances. + * + * A scaled advance is returned in 16.16 format but isn't transformed by + * the affine transformation specified by @FT_Set_Transform. + */ + FT_EXPORT( FT_Error ) + FT_Get_Advance( FT_Face face, + FT_UInt gindex, + FT_Int32 load_flags, + FT_Fixed *padvance ); + + + /************************************************************************** + * + * @function: + * FT_Get_Advances + * + * @description: + * Retrieve the advance values of several glyph outlines in an @FT_Face. + * + * @input: + * face :: + * The source @FT_Face handle. + * + * start :: + * The first glyph index. + * + * count :: + * The number of advance values you want to retrieve. + * + * load_flags :: + * A set of bit flags similar to those used when calling + * @FT_Load_Glyph. + * + * @output: + * padvance :: + * The advance values. This array, to be provided by the caller, must + * contain at least `count` elements. + * + * If scaling is performed (based on the value of `load_flags`), the + * advance values are in 16.16 format. Otherwise, they are in font + * units. + * + * If @FT_LOAD_VERTICAL_LAYOUT is set, these are the vertical advances + * corresponding to a vertical layout. Otherwise, they are the + * horizontal advances in a horizontal layout. + * + * @return: + * FreeType error code. 0 means success. + * + * @note: + * This function may fail if you use @FT_ADVANCE_FLAG_FAST_ONLY and if + * the corresponding font backend doesn't have a quick way to retrieve + * the advances. + * + * Scaled advances are returned in 16.16 format but aren't transformed by + * the affine transformation specified by @FT_Set_Transform. + */ + FT_EXPORT( FT_Error ) + FT_Get_Advances( FT_Face face, + FT_UInt start, + FT_UInt count, + FT_Int32 load_flags, + FT_Fixed *padvances ); + + /* */ + + +FT_END_HEADER + +#endif /* FTADVANC_H_ */ + + +/* END */ diff --git a/dependencies/linux64/include/freetype2/freetype/ftbbox.h b/dependencies/linux64/include/freetype2/freetype/ftbbox.h new file mode 100644 index 0000000..12bbfa6 --- /dev/null +++ b/dependencies/linux64/include/freetype2/freetype/ftbbox.h @@ -0,0 +1,101 @@ +/**************************************************************************** + * + * ftbbox.h + * + * FreeType exact bbox computation (specification). + * + * Copyright (C) 1996-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + + /************************************************************************** + * + * This component has a _single_ role: to compute exact outline bounding + * boxes. + * + * It is separated from the rest of the engine for various technical + * reasons. It may well be integrated in 'ftoutln' later. + * + */ + + +#ifndef FTBBOX_H_ +#define FTBBOX_H_ + + +#include + +#ifdef FREETYPE_H +#error "freetype.h of FreeType 1 has been loaded!" +#error "Please fix the directory search order for header files" +#error "so that freetype.h of FreeType 2 is found first." +#endif + + +FT_BEGIN_HEADER + + + /************************************************************************** + * + * @section: + * outline_processing + * + */ + + + /************************************************************************** + * + * @function: + * FT_Outline_Get_BBox + * + * @description: + * Compute the exact bounding box of an outline. This is slower than + * computing the control box. However, it uses an advanced algorithm + * that returns _very_ quickly when the two boxes coincide. Otherwise, + * the outline Bezier arcs are traversed to extract their extrema. + * + * @input: + * outline :: + * A pointer to the source outline. + * + * @output: + * abbox :: + * The outline's exact bounding box. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * If the font is tricky and the glyph has been loaded with + * @FT_LOAD_NO_SCALE, the resulting BBox is meaningless. To get + * reasonable values for the BBox it is necessary to load the glyph at a + * large ppem value (so that the hinting instructions can properly shift + * and scale the subglyphs), then extracting the BBox, which can be + * eventually converted back to font units. + */ + FT_EXPORT( FT_Error ) + FT_Outline_Get_BBox( FT_Outline* outline, + FT_BBox *abbox ); + + /* */ + + +FT_END_HEADER + +#endif /* FTBBOX_H_ */ + + +/* END */ + + +/* Local Variables: */ +/* coding: utf-8 */ +/* End: */ diff --git a/dependencies/linux64/include/freetype2/freetype/ftbdf.h b/dependencies/linux64/include/freetype2/freetype/ftbdf.h new file mode 100644 index 0000000..6f63b0b --- /dev/null +++ b/dependencies/linux64/include/freetype2/freetype/ftbdf.h @@ -0,0 +1,212 @@ +/**************************************************************************** + * + * ftbdf.h + * + * FreeType API for accessing BDF-specific strings (specification). + * + * Copyright (C) 2002-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + +#ifndef FTBDF_H_ +#define FTBDF_H_ + +#include + +#ifdef FREETYPE_H +#error "freetype.h of FreeType 1 has been loaded!" +#error "Please fix the directory search order for header files" +#error "so that freetype.h of FreeType 2 is found first." +#endif + + +FT_BEGIN_HEADER + + + /************************************************************************** + * + * @section: + * bdf_fonts + * + * @title: + * BDF and PCF Files + * + * @abstract: + * BDF and PCF specific API. + * + * @description: + * This section contains the declaration of functions specific to BDF and + * PCF fonts. + * + */ + + + /************************************************************************** + * + * @enum: + * BDF_PropertyType + * + * @description: + * A list of BDF property types. + * + * @values: + * BDF_PROPERTY_TYPE_NONE :: + * Value~0 is used to indicate a missing property. + * + * BDF_PROPERTY_TYPE_ATOM :: + * Property is a string atom. + * + * BDF_PROPERTY_TYPE_INTEGER :: + * Property is a 32-bit signed integer. + * + * BDF_PROPERTY_TYPE_CARDINAL :: + * Property is a 32-bit unsigned integer. + */ + typedef enum BDF_PropertyType_ + { + BDF_PROPERTY_TYPE_NONE = 0, + BDF_PROPERTY_TYPE_ATOM = 1, + BDF_PROPERTY_TYPE_INTEGER = 2, + BDF_PROPERTY_TYPE_CARDINAL = 3 + + } BDF_PropertyType; + + + /************************************************************************** + * + * @type: + * BDF_Property + * + * @description: + * A handle to a @BDF_PropertyRec structure to model a given BDF/PCF + * property. + */ + typedef struct BDF_PropertyRec_* BDF_Property; + + + /************************************************************************** + * + * @struct: + * BDF_PropertyRec + * + * @description: + * This structure models a given BDF/PCF property. + * + * @fields: + * type :: + * The property type. + * + * u.atom :: + * The atom string, if type is @BDF_PROPERTY_TYPE_ATOM. May be + * `NULL`, indicating an empty string. + * + * u.integer :: + * A signed integer, if type is @BDF_PROPERTY_TYPE_INTEGER. + * + * u.cardinal :: + * An unsigned integer, if type is @BDF_PROPERTY_TYPE_CARDINAL. + */ + typedef struct BDF_PropertyRec_ + { + BDF_PropertyType type; + union { + const char* atom; + FT_Int32 integer; + FT_UInt32 cardinal; + + } u; + + } BDF_PropertyRec; + + + /************************************************************************** + * + * @function: + * FT_Get_BDF_Charset_ID + * + * @description: + * Retrieve a BDF font character set identity, according to the BDF + * specification. + * + * @input: + * face :: + * A handle to the input face. + * + * @output: + * acharset_encoding :: + * Charset encoding, as a C~string, owned by the face. + * + * acharset_registry :: + * Charset registry, as a C~string, owned by the face. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * This function only works with BDF faces, returning an error otherwise. + */ + FT_EXPORT( FT_Error ) + FT_Get_BDF_Charset_ID( FT_Face face, + const char* *acharset_encoding, + const char* *acharset_registry ); + + + /************************************************************************** + * + * @function: + * FT_Get_BDF_Property + * + * @description: + * Retrieve a BDF property from a BDF or PCF font file. + * + * @input: + * face :: + * A handle to the input face. + * + * name :: + * The property name. + * + * @output: + * aproperty :: + * The property. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * This function works with BDF _and_ PCF fonts. It returns an error + * otherwise. It also returns an error if the property is not in the + * font. + * + * A 'property' is a either key-value pair within the STARTPROPERTIES + * ... ENDPROPERTIES block of a BDF font or a key-value pair from the + * `info->props` array within a `FontRec` structure of a PCF font. + * + * Integer properties are always stored as 'signed' within PCF fonts; + * consequently, @BDF_PROPERTY_TYPE_CARDINAL is a possible return value + * for BDF fonts only. + * + * In case of error, `aproperty->type` is always set to + * @BDF_PROPERTY_TYPE_NONE. + */ + FT_EXPORT( FT_Error ) + FT_Get_BDF_Property( FT_Face face, + const char* prop_name, + BDF_PropertyRec *aproperty ); + + /* */ + +FT_END_HEADER + +#endif /* FTBDF_H_ */ + + +/* END */ diff --git a/dependencies/linux64/include/freetype2/freetype/ftbitmap.h b/dependencies/linux64/include/freetype2/freetype/ftbitmap.h new file mode 100644 index 0000000..df9d462 --- /dev/null +++ b/dependencies/linux64/include/freetype2/freetype/ftbitmap.h @@ -0,0 +1,329 @@ +/**************************************************************************** + * + * ftbitmap.h + * + * FreeType utility functions for bitmaps (specification). + * + * Copyright (C) 2004-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + +#ifndef FTBITMAP_H_ +#define FTBITMAP_H_ + + +#include +#include + +#ifdef FREETYPE_H +#error "freetype.h of FreeType 1 has been loaded!" +#error "Please fix the directory search order for header files" +#error "so that freetype.h of FreeType 2 is found first." +#endif + + +FT_BEGIN_HEADER + + + /************************************************************************** + * + * @section: + * bitmap_handling + * + * @title: + * Bitmap Handling + * + * @abstract: + * Handling FT_Bitmap objects. + * + * @description: + * This section contains functions for handling @FT_Bitmap objects, + * automatically adjusting the target's bitmap buffer size as needed. + * + * Note that none of the functions changes the bitmap's 'flow' (as + * indicated by the sign of the `pitch` field in @FT_Bitmap). + * + * To set the flow, assign an appropriate positive or negative value to + * the `pitch` field of the target @FT_Bitmap object after calling + * @FT_Bitmap_Init but before calling any of the other functions + * described here. + */ + + + /************************************************************************** + * + * @function: + * FT_Bitmap_Init + * + * @description: + * Initialize a pointer to an @FT_Bitmap structure. + * + * @inout: + * abitmap :: + * A pointer to the bitmap structure. + * + * @note: + * A deprecated name for the same function is `FT_Bitmap_New`. + */ + FT_EXPORT( void ) + FT_Bitmap_Init( FT_Bitmap *abitmap ); + + + /* deprecated */ + FT_EXPORT( void ) + FT_Bitmap_New( FT_Bitmap *abitmap ); + + + /************************************************************************** + * + * @function: + * FT_Bitmap_Copy + * + * @description: + * Copy a bitmap into another one. + * + * @input: + * library :: + * A handle to a library object. + * + * source :: + * A handle to the source bitmap. + * + * @output: + * target :: + * A handle to the target bitmap. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * `source->buffer` and `target->buffer` must neither be equal nor + * overlap. + */ + FT_EXPORT( FT_Error ) + FT_Bitmap_Copy( FT_Library library, + const FT_Bitmap *source, + FT_Bitmap *target ); + + + /************************************************************************** + * + * @function: + * FT_Bitmap_Embolden + * + * @description: + * Embolden a bitmap. The new bitmap will be about `xStrength` pixels + * wider and `yStrength` pixels higher. The left and bottom borders are + * kept unchanged. + * + * @input: + * library :: + * A handle to a library object. + * + * xStrength :: + * How strong the glyph is emboldened horizontally. Expressed in 26.6 + * pixel format. + * + * yStrength :: + * How strong the glyph is emboldened vertically. Expressed in 26.6 + * pixel format. + * + * @inout: + * bitmap :: + * A handle to the target bitmap. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * The current implementation restricts `xStrength` to be less than or + * equal to~8 if bitmap is of pixel_mode @FT_PIXEL_MODE_MONO. + * + * If you want to embolden the bitmap owned by a @FT_GlyphSlotRec, you + * should call @FT_GlyphSlot_Own_Bitmap on the slot first. + * + * Bitmaps in @FT_PIXEL_MODE_GRAY2 and @FT_PIXEL_MODE_GRAY@ format are + * converted to @FT_PIXEL_MODE_GRAY format (i.e., 8bpp). + */ + FT_EXPORT( FT_Error ) + FT_Bitmap_Embolden( FT_Library library, + FT_Bitmap* bitmap, + FT_Pos xStrength, + FT_Pos yStrength ); + + + /************************************************************************** + * + * @function: + * FT_Bitmap_Convert + * + * @description: + * Convert a bitmap object with depth 1bpp, 2bpp, 4bpp, 8bpp or 32bpp to + * a bitmap object with depth 8bpp, making the number of used bytes per + * line (a.k.a. the 'pitch') a multiple of `alignment`. + * + * @input: + * library :: + * A handle to a library object. + * + * source :: + * The source bitmap. + * + * alignment :: + * The pitch of the bitmap is a multiple of this argument. Common + * values are 1, 2, or 4. + * + * @output: + * target :: + * The target bitmap. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * It is possible to call @FT_Bitmap_Convert multiple times without + * calling @FT_Bitmap_Done (the memory is simply reallocated). + * + * Use @FT_Bitmap_Done to finally remove the bitmap object. + * + * The `library` argument is taken to have access to FreeType's memory + * handling functions. + * + * `source->buffer` and `target->buffer` must neither be equal nor + * overlap. + */ + FT_EXPORT( FT_Error ) + FT_Bitmap_Convert( FT_Library library, + const FT_Bitmap *source, + FT_Bitmap *target, + FT_Int alignment ); + + + /************************************************************************** + * + * @function: + * FT_Bitmap_Blend + * + * @description: + * Blend a bitmap onto another bitmap, using a given color. + * + * @input: + * library :: + * A handle to a library object. + * + * source :: + * The source bitmap, which can have any @FT_Pixel_Mode format. + * + * source_offset :: + * The offset vector to the upper left corner of the source bitmap in + * 26.6 pixel format. It should represent an integer offset; the + * function will set the lowest six bits to zero to enforce that. + * + * color :: + * The color used to draw `source` onto `target`. + * + * @inout: + * target :: + * A handle to an `FT_Bitmap` object. It should be either initialized + * as empty with a call to @FT_Bitmap_Init, or it should be of type + * @FT_PIXEL_MODE_BGRA. + * + * atarget_offset :: + * The offset vector to the upper left corner of the target bitmap in + * 26.6 pixel format. It should represent an integer offset; the + * function will set the lowest six bits to zero to enforce that. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * This function doesn't perform clipping. + * + * The bitmap in `target` gets allocated or reallocated as needed; the + * vector `atarget_offset` is updated accordingly. + * + * In case of allocation or reallocation, the bitmap's pitch is set to + * `4 * width`. Both `source` and `target` must have the same bitmap + * flow (as indicated by the sign of the `pitch` field). + * + * `source->buffer` and `target->buffer` must neither be equal nor + * overlap. + * + * @since: + * 2.10 + */ + FT_EXPORT( FT_Error ) + FT_Bitmap_Blend( FT_Library library, + const FT_Bitmap* source, + const FT_Vector source_offset, + FT_Bitmap* target, + FT_Vector *atarget_offset, + FT_Color color ); + + + /************************************************************************** + * + * @function: + * FT_GlyphSlot_Own_Bitmap + * + * @description: + * Make sure that a glyph slot owns `slot->bitmap`. + * + * @input: + * slot :: + * The glyph slot. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * This function is to be used in combination with @FT_Bitmap_Embolden. + */ + FT_EXPORT( FT_Error ) + FT_GlyphSlot_Own_Bitmap( FT_GlyphSlot slot ); + + + /************************************************************************** + * + * @function: + * FT_Bitmap_Done + * + * @description: + * Destroy a bitmap object initialized with @FT_Bitmap_Init. + * + * @input: + * library :: + * A handle to a library object. + * + * bitmap :: + * The bitmap object to be freed. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * The `library` argument is taken to have access to FreeType's memory + * handling functions. + */ + FT_EXPORT( FT_Error ) + FT_Bitmap_Done( FT_Library library, + FT_Bitmap *bitmap ); + + + /* */ + + +FT_END_HEADER + +#endif /* FTBITMAP_H_ */ + + +/* END */ diff --git a/dependencies/linux64/include/freetype2/freetype/ftbzip2.h b/dependencies/linux64/include/freetype2/freetype/ftbzip2.h new file mode 100644 index 0000000..c5baea8 --- /dev/null +++ b/dependencies/linux64/include/freetype2/freetype/ftbzip2.h @@ -0,0 +1,102 @@ +/**************************************************************************** + * + * ftbzip2.h + * + * Bzip2-compressed stream support. + * + * Copyright (C) 2010-2024 by + * Joel Klinghed. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + +#ifndef FTBZIP2_H_ +#define FTBZIP2_H_ + +#include + +#ifdef FREETYPE_H +#error "freetype.h of FreeType 1 has been loaded!" +#error "Please fix the directory search order for header files" +#error "so that freetype.h of FreeType 2 is found first." +#endif + + +FT_BEGIN_HEADER + + /************************************************************************** + * + * @section: + * bzip2 + * + * @title: + * BZIP2 Streams + * + * @abstract: + * Using bzip2-compressed font files. + * + * @description: + * In certain builds of the library, bzip2 compression recognition is + * automatically handled when calling @FT_New_Face or @FT_Open_Face. + * This means that if no font driver is capable of handling the raw + * compressed file, the library will try to open a bzip2 compressed + * stream from it and re-open the face with it. + * + * The stream implementation is very basic and resets the decompression + * process each time seeking backwards is needed within the stream, + * which significantly undermines the performance. + * + * This section contains the declaration of Bzip2-specific functions. + * + */ + + + /************************************************************************** + * + * @function: + * FT_Stream_OpenBzip2 + * + * @description: + * Open a new stream to parse bzip2-compressed font files. This is + * mainly used to support the compressed `*.pcf.bz2` fonts that come with + * XFree86. + * + * @input: + * stream :: + * The target embedding stream. + * + * source :: + * The source stream. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * The source stream must be opened _before_ calling this function. + * + * Calling the internal function `FT_Stream_Close` on the new stream will + * **not** call `FT_Stream_Close` on the source stream. None of the + * stream objects will be released to the heap. + * + * This function may return `FT_Err_Unimplemented_Feature` if your build + * of FreeType was not compiled with bzip2 support. + */ + FT_EXPORT( FT_Error ) + FT_Stream_OpenBzip2( FT_Stream stream, + FT_Stream source ); + + /* */ + + +FT_END_HEADER + +#endif /* FTBZIP2_H_ */ + + +/* END */ diff --git a/dependencies/linux64/include/freetype2/freetype/ftcache.h b/dependencies/linux64/include/freetype2/freetype/ftcache.h new file mode 100644 index 0000000..140df4c --- /dev/null +++ b/dependencies/linux64/include/freetype2/freetype/ftcache.h @@ -0,0 +1,1087 @@ +/**************************************************************************** + * + * ftcache.h + * + * FreeType Cache subsystem (specification). + * + * Copyright (C) 1996-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + +#ifndef FTCACHE_H_ +#define FTCACHE_H_ + + +#include + + +FT_BEGIN_HEADER + + + /************************************************************************** + * + * @section: + * cache_subsystem + * + * @title: + * Cache Sub-System + * + * @abstract: + * How to cache face, size, and glyph data with FreeType~2. + * + * @description: + * This section describes the FreeType~2 cache sub-system, which is used + * to limit the number of concurrently opened @FT_Face and @FT_Size + * objects, as well as caching information like character maps and glyph + * images while limiting their maximum memory usage. + * + * Note that all types and functions begin with the `FTC_` prefix rather + * than the usual `FT_` prefix in the rest of FreeType. + * + * The cache is highly portable and, thus, doesn't know anything about + * the fonts installed on your system, or how to access them. Therefore, + * it requires the following. + * + * * @FTC_FaceID, an arbitrary non-zero value that uniquely identifies + * available or installed font faces, has to be provided to the + * cache by the client. Note that the cache only stores and compares + * these values and doesn't try to interpret them in any way, but they + * have to be persistent on the client side. + * + * * @FTC_Face_Requester, a method to convert an @FTC_FaceID into a new + * @FT_Face object when necessary, has to be provided to the cache by + * the client. The @FT_Face object is completely managed by the cache, + * including its termination through @FT_Done_Face. To monitor + * termination of face objects, the finalizer callback in the `generic` + * field of the @FT_Face object can be used, which might also be used + * to store the @FTC_FaceID of the face. + * + * Clients are free to map face IDs to anything useful. The most simple + * usage is, for example, to associate them to a `{pathname,face_index}` + * pair that is then used by @FTC_Face_Requester to call @FT_New_Face. + * However, more complex schemes are also possible. + * + * Note that for the cache to work correctly, the face ID values must be + * **persistent**, which means that the contents they point to should not + * change at runtime, or that their value should not become invalid. + * If this is unavoidable (e.g., when a font is uninstalled at runtime), + * you should call @FTC_Manager_RemoveFaceID as soon as possible to let + * the cache get rid of any references to the old @FTC_FaceID it may keep + * internally. Failure to do so will lead to incorrect behaviour or even + * crashes in @FTC_Face_Requester. + * + * To use the cache, start with calling @FTC_Manager_New to create a new + * @FTC_Manager object, which models a single cache instance. You can + * then look up @FT_Face and @FT_Size objects with + * @FTC_Manager_LookupFace and @FTC_Manager_LookupSize, respectively, and + * use them in any FreeType work stream. You can also cache other + * FreeType objects as follows. + * + * * If you want to use the charmap caching, call @FTC_CMapCache_New, + * then later use @FTC_CMapCache_Lookup to perform the equivalent of + * @FT_Get_Char_Index, only much faster. + * + * * If you want to use the @FT_Glyph caching, call @FTC_ImageCache_New, + * then later use @FTC_ImageCache_Lookup to retrieve the corresponding + * @FT_Glyph objects from the cache. + * + * * If you need lots of small bitmaps, it is much more memory-efficient + * to call @FTC_SBitCache_New followed by @FTC_SBitCache_Lookup. This + * returns @FTC_SBitRec structures, which are used to store small + * bitmaps directly. (A small bitmap is one whose metrics and + * dimensions all fit into 8-bit integers). + * + * @order: + * FTC_Manager + * FTC_FaceID + * FTC_Face_Requester + * + * FTC_Manager_New + * FTC_Manager_Reset + * FTC_Manager_Done + * FTC_Manager_LookupFace + * FTC_Manager_LookupSize + * FTC_Manager_RemoveFaceID + * + * FTC_Node + * FTC_Node_Unref + * + * FTC_ImageCache + * FTC_ImageCache_New + * FTC_ImageCache_Lookup + * + * FTC_SBit + * FTC_SBitCache + * FTC_SBitCache_New + * FTC_SBitCache_Lookup + * + * FTC_CMapCache + * FTC_CMapCache_New + * FTC_CMapCache_Lookup + * + *************************************************************************/ + + + /*************************************************************************/ + /*************************************************************************/ + /*************************************************************************/ + /***** *****/ + /***** BASIC TYPE DEFINITIONS *****/ + /***** *****/ + /*************************************************************************/ + /*************************************************************************/ + /*************************************************************************/ + + + /************************************************************************** + * + * @type: + * FTC_FaceID + * + * @description: + * An opaque pointer type that is used to identity face objects. The + * contents of such objects is application-dependent. + * + * These pointers are typically used to point to a user-defined structure + * containing a font file path, and face index. + * + * @note: + * Never use `NULL` as a valid @FTC_FaceID. + * + * Face IDs are passed by the client to the cache manager that calls, + * when needed, the @FTC_Face_Requester to translate them into new + * @FT_Face objects. + * + * If the content of a given face ID changes at runtime, or if the value + * becomes invalid (e.g., when uninstalling a font), you should + * immediately call @FTC_Manager_RemoveFaceID before any other cache + * function. + * + * Failure to do so will result in incorrect behaviour or even memory + * leaks and crashes. + */ + typedef FT_Pointer FTC_FaceID; + + + /************************************************************************** + * + * @functype: + * FTC_Face_Requester + * + * @description: + * A callback function provided by client applications. It is used by + * the cache manager to translate a given @FTC_FaceID into a new valid + * @FT_Face object, on demand. + * + * @input: + * face_id :: + * The face ID to resolve. + * + * library :: + * A handle to a FreeType library object. + * + * req_data :: + * Application-provided request data (see note below). + * + * @output: + * aface :: + * A new @FT_Face handle. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * The third parameter `req_data` is the same as the one passed by the + * client when @FTC_Manager_New is called. + * + * The face requester should not perform funny things on the returned + * face object, like creating a new @FT_Size for it, or setting a + * transformation through @FT_Set_Transform! + */ + typedef FT_Error + (*FTC_Face_Requester)( FTC_FaceID face_id, + FT_Library library, + FT_Pointer req_data, + FT_Face* aface ); + + /* */ + + + /*************************************************************************/ + /*************************************************************************/ + /*************************************************************************/ + /***** *****/ + /***** CACHE MANAGER OBJECT *****/ + /***** *****/ + /*************************************************************************/ + /*************************************************************************/ + /*************************************************************************/ + + + /************************************************************************** + * + * @type: + * FTC_Manager + * + * @description: + * This object corresponds to one instance of the cache-subsystem. It is + * used to cache one or more @FT_Face objects, along with corresponding + * @FT_Size objects. + * + * The manager intentionally limits the total number of opened @FT_Face + * and @FT_Size objects to control memory usage. See the `max_faces` and + * `max_sizes` parameters of @FTC_Manager_New. + * + * The manager is also used to cache 'nodes' of various types while + * limiting their total memory usage. + * + * All limitations are enforced by keeping lists of managed objects in + * most-recently-used order, and flushing old nodes to make room for new + * ones. + */ + typedef struct FTC_ManagerRec_* FTC_Manager; + + + /************************************************************************** + * + * @type: + * FTC_Node + * + * @description: + * An opaque handle to a cache node object. Each cache node is + * reference-counted. A node with a count of~0 might be flushed out of a + * full cache whenever a lookup request is performed. + * + * If you look up nodes, you have the ability to 'acquire' them, i.e., to + * increment their reference count. This will prevent the node from + * being flushed out of the cache until you explicitly 'release' it (see + * @FTC_Node_Unref). + * + * See also @FTC_SBitCache_Lookup and @FTC_ImageCache_Lookup. + */ + typedef struct FTC_NodeRec_* FTC_Node; + + + /************************************************************************** + * + * @function: + * FTC_Manager_New + * + * @description: + * Create a new cache manager. + * + * @input: + * library :: + * The parent FreeType library handle to use. + * + * max_faces :: + * Maximum number of opened @FT_Face objects managed by this cache + * instance. Use~0 for defaults. + * + * max_sizes :: + * Maximum number of opened @FT_Size objects managed by this cache + * instance. Use~0 for defaults. + * + * max_bytes :: + * Maximum number of bytes to use for cached data nodes. Use~0 for + * defaults. Note that this value does not account for managed + * @FT_Face and @FT_Size objects. + * + * requester :: + * An application-provided callback used to translate face IDs into + * real @FT_Face objects. + * + * req_data :: + * A generic pointer that is passed to the requester each time it is + * called (see @FTC_Face_Requester). + * + * @output: + * amanager :: + * A handle to a new manager object. 0~in case of failure. + * + * @return: + * FreeType error code. 0~means success. + */ + FT_EXPORT( FT_Error ) + FTC_Manager_New( FT_Library library, + FT_UInt max_faces, + FT_UInt max_sizes, + FT_ULong max_bytes, + FTC_Face_Requester requester, + FT_Pointer req_data, + FTC_Manager *amanager ); + + + /************************************************************************** + * + * @function: + * FTC_Manager_Reset + * + * @description: + * Empty a given cache manager. This simply gets rid of all the + * currently cached @FT_Face and @FT_Size objects within the manager. + * + * @inout: + * manager :: + * A handle to the manager. + */ + FT_EXPORT( void ) + FTC_Manager_Reset( FTC_Manager manager ); + + + /************************************************************************** + * + * @function: + * FTC_Manager_Done + * + * @description: + * Destroy a given manager after emptying it. + * + * @input: + * manager :: + * A handle to the target cache manager object. + */ + FT_EXPORT( void ) + FTC_Manager_Done( FTC_Manager manager ); + + + /************************************************************************** + * + * @function: + * FTC_Manager_LookupFace + * + * @description: + * Retrieve the @FT_Face object that corresponds to a given face ID + * through a cache manager. + * + * @input: + * manager :: + * A handle to the cache manager. + * + * face_id :: + * The ID of the face object. + * + * @output: + * aface :: + * A handle to the face object. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * The returned @FT_Face object is always owned by the manager. You + * should never try to discard it yourself. + * + * The @FT_Face object doesn't necessarily have a current size object + * (i.e., face->size can be~0). If you need a specific 'font size', use + * @FTC_Manager_LookupSize instead. + * + * Never change the face's transformation matrix (i.e., never call the + * @FT_Set_Transform function) on a returned face! If you need to + * transform glyphs, do it yourself after glyph loading. + * + * When you perform a lookup, out-of-memory errors are detected _within_ + * the lookup and force incremental flushes of the cache until enough + * memory is released for the lookup to succeed. + * + * If a lookup fails with `FT_Err_Out_Of_Memory` the cache has already + * been completely flushed, and still no memory was available for the + * operation. + */ + FT_EXPORT( FT_Error ) + FTC_Manager_LookupFace( FTC_Manager manager, + FTC_FaceID face_id, + FT_Face *aface ); + + + /************************************************************************** + * + * @struct: + * FTC_ScalerRec + * + * @description: + * A structure used to describe a given character size in either pixels + * or points to the cache manager. See @FTC_Manager_LookupSize. + * + * @fields: + * face_id :: + * The source face ID. + * + * width :: + * The character width. + * + * height :: + * The character height. + * + * pixel :: + * A Boolean. If 1, the `width` and `height` fields are interpreted as + * integer pixel character sizes. Otherwise, they are expressed as + * 1/64 of points. + * + * x_res :: + * Only used when `pixel` is value~0 to indicate the horizontal + * resolution in dpi. + * + * y_res :: + * Only used when `pixel` is value~0 to indicate the vertical + * resolution in dpi. + * + * @note: + * This type is mainly used to retrieve @FT_Size objects through the + * cache manager. + */ + typedef struct FTC_ScalerRec_ + { + FTC_FaceID face_id; + FT_UInt width; + FT_UInt height; + FT_Int pixel; + FT_UInt x_res; + FT_UInt y_res; + + } FTC_ScalerRec; + + + /************************************************************************** + * + * @struct: + * FTC_Scaler + * + * @description: + * A handle to an @FTC_ScalerRec structure. + */ + typedef struct FTC_ScalerRec_* FTC_Scaler; + + + /************************************************************************** + * + * @function: + * FTC_Manager_LookupSize + * + * @description: + * Retrieve the @FT_Size object that corresponds to a given + * @FTC_ScalerRec pointer through a cache manager. + * + * @input: + * manager :: + * A handle to the cache manager. + * + * scaler :: + * A scaler handle. + * + * @output: + * asize :: + * A handle to the size object. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * The returned @FT_Size object is always owned by the manager. You + * should never try to discard it by yourself. + * + * You can access the parent @FT_Face object simply as `size->face` if + * you need it. Note that this object is also owned by the manager. + * + * @note: + * When you perform a lookup, out-of-memory errors are detected _within_ + * the lookup and force incremental flushes of the cache until enough + * memory is released for the lookup to succeed. + * + * If a lookup fails with `FT_Err_Out_Of_Memory` the cache has already + * been completely flushed, and still no memory is available for the + * operation. + */ + FT_EXPORT( FT_Error ) + FTC_Manager_LookupSize( FTC_Manager manager, + FTC_Scaler scaler, + FT_Size *asize ); + + + /************************************************************************** + * + * @function: + * FTC_Node_Unref + * + * @description: + * Decrement a cache node's internal reference count. When the count + * reaches 0, it is not destroyed but becomes eligible for subsequent + * cache flushes. + * + * @input: + * node :: + * The cache node handle. + * + * manager :: + * The cache manager handle. + */ + FT_EXPORT( void ) + FTC_Node_Unref( FTC_Node node, + FTC_Manager manager ); + + + /************************************************************************** + * + * @function: + * FTC_Manager_RemoveFaceID + * + * @description: + * A special function used to indicate to the cache manager that a given + * @FTC_FaceID is no longer valid, either because its content changed, or + * because it was deallocated or uninstalled. + * + * @input: + * manager :: + * The cache manager handle. + * + * face_id :: + * The @FTC_FaceID to be removed. + * + * @note: + * This function flushes all nodes from the cache corresponding to this + * `face_id`, with the exception of nodes with a non-null reference + * count. + * + * Such nodes are however modified internally so as to never appear in + * later lookups with the same `face_id` value, and to be immediately + * destroyed when released by all their users. + * + */ + FT_EXPORT( void ) + FTC_Manager_RemoveFaceID( FTC_Manager manager, + FTC_FaceID face_id ); + + + /************************************************************************** + * + * @type: + * FTC_CMapCache + * + * @description: + * An opaque handle used to model a charmap cache. This cache is to hold + * character codes -> glyph indices mappings. + * + */ + typedef struct FTC_CMapCacheRec_* FTC_CMapCache; + + + /************************************************************************** + * + * @function: + * FTC_CMapCache_New + * + * @description: + * Create a new charmap cache. + * + * @input: + * manager :: + * A handle to the cache manager. + * + * @output: + * acache :: + * A new cache handle. `NULL` in case of error. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * Like all other caches, this one will be destroyed with the cache + * manager. + * + */ + FT_EXPORT( FT_Error ) + FTC_CMapCache_New( FTC_Manager manager, + FTC_CMapCache *acache ); + + + /************************************************************************** + * + * @function: + * FTC_CMapCache_Lookup + * + * @description: + * Translate a character code into a glyph index, using the charmap + * cache. + * + * @input: + * cache :: + * A charmap cache handle. + * + * face_id :: + * The source face ID. + * + * cmap_index :: + * The index of the charmap in the source face. Any negative value + * means to use the cache @FT_Face's default charmap. + * + * char_code :: + * The character code (in the corresponding charmap). + * + * @return: + * Glyph index. 0~means 'no glyph'. + * + */ + FT_EXPORT( FT_UInt ) + FTC_CMapCache_Lookup( FTC_CMapCache cache, + FTC_FaceID face_id, + FT_Int cmap_index, + FT_UInt32 char_code ); + + + /*************************************************************************/ + /*************************************************************************/ + /*************************************************************************/ + /***** *****/ + /***** IMAGE CACHE OBJECT *****/ + /***** *****/ + /*************************************************************************/ + /*************************************************************************/ + /*************************************************************************/ + + + /************************************************************************** + * + * @struct: + * FTC_ImageTypeRec + * + * @description: + * A structure used to model the type of images in a glyph cache. + * + * @fields: + * face_id :: + * The face ID. + * + * width :: + * The width in pixels. + * + * height :: + * The height in pixels. + * + * flags :: + * The load flags, as in @FT_Load_Glyph. + * + */ + typedef struct FTC_ImageTypeRec_ + { + FTC_FaceID face_id; + FT_UInt width; + FT_UInt height; + FT_Int32 flags; + + } FTC_ImageTypeRec; + + + /************************************************************************** + * + * @type: + * FTC_ImageType + * + * @description: + * A handle to an @FTC_ImageTypeRec structure. + * + */ + typedef struct FTC_ImageTypeRec_* FTC_ImageType; + + + /* */ + + +#define FTC_IMAGE_TYPE_COMPARE( d1, d2 ) \ + ( (d1)->face_id == (d2)->face_id && \ + (d1)->width == (d2)->width && \ + (d1)->flags == (d2)->flags ) + + + /************************************************************************** + * + * @type: + * FTC_ImageCache + * + * @description: + * A handle to a glyph image cache object. They are designed to hold + * many distinct glyph images while not exceeding a certain memory + * threshold. + */ + typedef struct FTC_ImageCacheRec_* FTC_ImageCache; + + + /************************************************************************** + * + * @function: + * FTC_ImageCache_New + * + * @description: + * Create a new glyph image cache. + * + * @input: + * manager :: + * The parent manager for the image cache. + * + * @output: + * acache :: + * A handle to the new glyph image cache object. + * + * @return: + * FreeType error code. 0~means success. + */ + FT_EXPORT( FT_Error ) + FTC_ImageCache_New( FTC_Manager manager, + FTC_ImageCache *acache ); + + + /************************************************************************** + * + * @function: + * FTC_ImageCache_Lookup + * + * @description: + * Retrieve a given glyph image from a glyph image cache. + * + * @input: + * cache :: + * A handle to the source glyph image cache. + * + * type :: + * A pointer to a glyph image type descriptor. + * + * gindex :: + * The glyph index to retrieve. + * + * @output: + * aglyph :: + * The corresponding @FT_Glyph object. 0~in case of failure. + * + * anode :: + * Used to return the address of the corresponding cache node after + * incrementing its reference count (see note below). + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * The returned glyph is owned and managed by the glyph image cache. + * Never try to transform or discard it manually! You can however create + * a copy with @FT_Glyph_Copy and modify the new one. + * + * If `anode` is _not_ `NULL`, it receives the address of the cache node + * containing the glyph image, after increasing its reference count. + * This ensures that the node (as well as the @FT_Glyph) will always be + * kept in the cache until you call @FTC_Node_Unref to 'release' it. + * + * If `anode` is `NULL`, the cache node is left unchanged, which means + * that the @FT_Glyph could be flushed out of the cache on the next call + * to one of the caching sub-system APIs. Don't assume that it is + * persistent! + */ + FT_EXPORT( FT_Error ) + FTC_ImageCache_Lookup( FTC_ImageCache cache, + FTC_ImageType type, + FT_UInt gindex, + FT_Glyph *aglyph, + FTC_Node *anode ); + + + /************************************************************************** + * + * @function: + * FTC_ImageCache_LookupScaler + * + * @description: + * A variant of @FTC_ImageCache_Lookup that uses an @FTC_ScalerRec to + * specify the face ID and its size. + * + * @input: + * cache :: + * A handle to the source glyph image cache. + * + * scaler :: + * A pointer to a scaler descriptor. + * + * load_flags :: + * The corresponding load flags. + * + * gindex :: + * The glyph index to retrieve. + * + * @output: + * aglyph :: + * The corresponding @FT_Glyph object. 0~in case of failure. + * + * anode :: + * Used to return the address of the corresponding cache node after + * incrementing its reference count (see note below). + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * The returned glyph is owned and managed by the glyph image cache. + * Never try to transform or discard it manually! You can however create + * a copy with @FT_Glyph_Copy and modify the new one. + * + * If `anode` is _not_ `NULL`, it receives the address of the cache node + * containing the glyph image, after increasing its reference count. + * This ensures that the node (as well as the @FT_Glyph) will always be + * kept in the cache until you call @FTC_Node_Unref to 'release' it. + * + * If `anode` is `NULL`, the cache node is left unchanged, which means + * that the @FT_Glyph could be flushed out of the cache on the next call + * to one of the caching sub-system APIs. Don't assume that it is + * persistent! + * + * Calls to @FT_Set_Char_Size and friends have no effect on cached + * glyphs; you should always use the FreeType cache API instead. + */ + FT_EXPORT( FT_Error ) + FTC_ImageCache_LookupScaler( FTC_ImageCache cache, + FTC_Scaler scaler, + FT_ULong load_flags, + FT_UInt gindex, + FT_Glyph *aglyph, + FTC_Node *anode ); + + + /************************************************************************** + * + * @type: + * FTC_SBit + * + * @description: + * A handle to a small bitmap descriptor. See the @FTC_SBitRec structure + * for details. + */ + typedef struct FTC_SBitRec_* FTC_SBit; + + + /************************************************************************** + * + * @struct: + * FTC_SBitRec + * + * @description: + * A very compact structure used to describe a small glyph bitmap. + * + * @fields: + * width :: + * The bitmap width in pixels. + * + * height :: + * The bitmap height in pixels. + * + * left :: + * The horizontal distance from the pen position to the left bitmap + * border (a.k.a. 'left side bearing', or 'lsb'). + * + * top :: + * The vertical distance from the pen position (on the baseline) to the + * upper bitmap border (a.k.a. 'top side bearing'). The distance is + * positive for upwards y~coordinates. + * + * format :: + * The format of the glyph bitmap (monochrome or gray). + * + * max_grays :: + * Maximum gray level value (in the range 1 to~255). + * + * pitch :: + * The number of bytes per bitmap line. May be positive or negative. + * + * xadvance :: + * The horizontal advance width in pixels. + * + * yadvance :: + * The vertical advance height in pixels. + * + * buffer :: + * A pointer to the bitmap pixels. + */ + typedef struct FTC_SBitRec_ + { + FT_Byte width; + FT_Byte height; + FT_Char left; + FT_Char top; + + FT_Byte format; + FT_Byte max_grays; + FT_Short pitch; + FT_Char xadvance; + FT_Char yadvance; + + FT_Byte* buffer; + + } FTC_SBitRec; + + + /************************************************************************** + * + * @type: + * FTC_SBitCache + * + * @description: + * A handle to a small bitmap cache. These are special cache objects + * used to store small glyph bitmaps (and anti-aliased pixmaps) in a much + * more efficient way than the traditional glyph image cache implemented + * by @FTC_ImageCache. + */ + typedef struct FTC_SBitCacheRec_* FTC_SBitCache; + + + /************************************************************************** + * + * @function: + * FTC_SBitCache_New + * + * @description: + * Create a new cache to store small glyph bitmaps. + * + * @input: + * manager :: + * A handle to the source cache manager. + * + * @output: + * acache :: + * A handle to the new sbit cache. `NULL` in case of error. + * + * @return: + * FreeType error code. 0~means success. + */ + FT_EXPORT( FT_Error ) + FTC_SBitCache_New( FTC_Manager manager, + FTC_SBitCache *acache ); + + + /************************************************************************** + * + * @function: + * FTC_SBitCache_Lookup + * + * @description: + * Look up a given small glyph bitmap in a given sbit cache and 'lock' it + * to prevent its flushing from the cache until needed. + * + * @input: + * cache :: + * A handle to the source sbit cache. + * + * type :: + * A pointer to the glyph image type descriptor. + * + * gindex :: + * The glyph index. + * + * @output: + * sbit :: + * A handle to a small bitmap descriptor. + * + * anode :: + * Used to return the address of the corresponding cache node after + * incrementing its reference count (see note below). + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * The small bitmap descriptor and its bit buffer are owned by the cache + * and should never be freed by the application. They might as well + * disappear from memory on the next cache lookup, so don't treat them as + * persistent data. + * + * The descriptor's `buffer` field is set to~0 to indicate a missing + * glyph bitmap. + * + * If `anode` is _not_ `NULL`, it receives the address of the cache node + * containing the bitmap, after increasing its reference count. This + * ensures that the node (as well as the image) will always be kept in + * the cache until you call @FTC_Node_Unref to 'release' it. + * + * If `anode` is `NULL`, the cache node is left unchanged, which means + * that the bitmap could be flushed out of the cache on the next call to + * one of the caching sub-system APIs. Don't assume that it is + * persistent! + */ + FT_EXPORT( FT_Error ) + FTC_SBitCache_Lookup( FTC_SBitCache cache, + FTC_ImageType type, + FT_UInt gindex, + FTC_SBit *sbit, + FTC_Node *anode ); + + + /************************************************************************** + * + * @function: + * FTC_SBitCache_LookupScaler + * + * @description: + * A variant of @FTC_SBitCache_Lookup that uses an @FTC_ScalerRec to + * specify the face ID and its size. + * + * @input: + * cache :: + * A handle to the source sbit cache. + * + * scaler :: + * A pointer to the scaler descriptor. + * + * load_flags :: + * The corresponding load flags. + * + * gindex :: + * The glyph index. + * + * @output: + * sbit :: + * A handle to a small bitmap descriptor. + * + * anode :: + * Used to return the address of the corresponding cache node after + * incrementing its reference count (see note below). + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * The small bitmap descriptor and its bit buffer are owned by the cache + * and should never be freed by the application. They might as well + * disappear from memory on the next cache lookup, so don't treat them as + * persistent data. + * + * The descriptor's `buffer` field is set to~0 to indicate a missing + * glyph bitmap. + * + * If `anode` is _not_ `NULL`, it receives the address of the cache node + * containing the bitmap, after increasing its reference count. This + * ensures that the node (as well as the image) will always be kept in + * the cache until you call @FTC_Node_Unref to 'release' it. + * + * If `anode` is `NULL`, the cache node is left unchanged, which means + * that the bitmap could be flushed out of the cache on the next call to + * one of the caching sub-system APIs. Don't assume that it is + * persistent! + */ + FT_EXPORT( FT_Error ) + FTC_SBitCache_LookupScaler( FTC_SBitCache cache, + FTC_Scaler scaler, + FT_ULong load_flags, + FT_UInt gindex, + FTC_SBit *sbit, + FTC_Node *anode ); + + /* */ + + +FT_END_HEADER + +#endif /* FTCACHE_H_ */ + + +/* END */ diff --git a/dependencies/linux64/include/freetype2/freetype/ftchapters.h b/dependencies/linux64/include/freetype2/freetype/ftchapters.h new file mode 100644 index 0000000..7566fbd --- /dev/null +++ b/dependencies/linux64/include/freetype2/freetype/ftchapters.h @@ -0,0 +1,168 @@ +/**************************************************************************** + * + * This file defines the structure of the FreeType reference. + * It is used by the python script that generates the HTML files. + * + */ + + + /************************************************************************** + * + * @chapter: + * general_remarks + * + * @title: + * General Remarks + * + * @sections: + * preamble + * header_inclusion + * user_allocation + * + */ + + + /************************************************************************** + * + * @chapter: + * core_api + * + * @title: + * Core API + * + * @sections: + * basic_types + * library_setup + * face_creation + * font_testing_macros + * sizing_and_scaling + * glyph_retrieval + * character_mapping + * information_retrieval + * other_api_data + * + */ + + + /************************************************************************** + * + * @chapter: + * extended_api + * + * @title: + * Extended API + * + * @sections: + * glyph_variants + * color_management + * layer_management + * glyph_management + * mac_specific + * sizes_management + * header_file_macros + * + */ + + + /************************************************************************** + * + * @chapter: + * format_specific + * + * @title: + * Format-Specific API + * + * @sections: + * multiple_masters + * truetype_tables + * type1_tables + * sfnt_names + * bdf_fonts + * cid_fonts + * pfr_fonts + * winfnt_fonts + * svg_fonts + * font_formats + * gasp_table + * + */ + + + /************************************************************************** + * + * @chapter: + * module_specific + * + * @title: + * Controlling FreeType Modules + * + * @sections: + * auto_hinter + * cff_driver + * t1_cid_driver + * tt_driver + * pcf_driver + * ot_svg_driver + * properties + * parameter_tags + * lcd_rendering + * + */ + + + /************************************************************************** + * + * @chapter: + * cache_subsystem + * + * @title: + * Cache Sub-System + * + * @sections: + * cache_subsystem + * + */ + + + /************************************************************************** + * + * @chapter: + * support_api + * + * @title: + * Support API + * + * @sections: + * computations + * list_processing + * outline_processing + * quick_advance + * bitmap_handling + * raster + * glyph_stroker + * system_interface + * module_management + * gzip + * lzw + * bzip2 + * debugging_apis + * + */ + + + /************************************************************************** + * + * @chapter: + * error_codes + * + * @title: + * Error Codes + * + * @sections: + * error_enumerations + * error_code_values + * + */ + + +/* END */ diff --git a/dependencies/linux64/include/freetype2/freetype/ftcid.h b/dependencies/linux64/include/freetype2/freetype/ftcid.h new file mode 100644 index 0000000..96b2a90 --- /dev/null +++ b/dependencies/linux64/include/freetype2/freetype/ftcid.h @@ -0,0 +1,167 @@ +/**************************************************************************** + * + * ftcid.h + * + * FreeType API for accessing CID font information (specification). + * + * Copyright (C) 2007-2024 by + * Dereg Clegg and Michael Toftdal. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + +#ifndef FTCID_H_ +#define FTCID_H_ + +#include + +#ifdef FREETYPE_H +#error "freetype.h of FreeType 1 has been loaded!" +#error "Please fix the directory search order for header files" +#error "so that freetype.h of FreeType 2 is found first." +#endif + + +FT_BEGIN_HEADER + + + /************************************************************************** + * + * @section: + * cid_fonts + * + * @title: + * CID Fonts + * + * @abstract: + * CID-keyed font-specific API. + * + * @description: + * This section contains the declaration of CID-keyed font-specific + * functions. + * + */ + + + /************************************************************************** + * + * @function: + * FT_Get_CID_Registry_Ordering_Supplement + * + * @description: + * Retrieve the Registry/Ordering/Supplement triple (also known as the + * "R/O/S") from a CID-keyed font. + * + * @input: + * face :: + * A handle to the input face. + * + * @output: + * registry :: + * The registry, as a C~string, owned by the face. + * + * ordering :: + * The ordering, as a C~string, owned by the face. + * + * supplement :: + * The supplement. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * This function only works with CID faces, returning an error + * otherwise. + * + * @since: + * 2.3.6 + */ + FT_EXPORT( FT_Error ) + FT_Get_CID_Registry_Ordering_Supplement( FT_Face face, + const char* *registry, + const char* *ordering, + FT_Int *supplement ); + + + /************************************************************************** + * + * @function: + * FT_Get_CID_Is_Internally_CID_Keyed + * + * @description: + * Retrieve the type of the input face, CID keyed or not. In contrast + * to the @FT_IS_CID_KEYED macro this function returns successfully also + * for CID-keyed fonts in an SFNT wrapper. + * + * @input: + * face :: + * A handle to the input face. + * + * @output: + * is_cid :: + * The type of the face as an @FT_Bool. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * This function only works with CID faces and OpenType fonts, returning + * an error otherwise. + * + * @since: + * 2.3.9 + */ + FT_EXPORT( FT_Error ) + FT_Get_CID_Is_Internally_CID_Keyed( FT_Face face, + FT_Bool *is_cid ); + + + /************************************************************************** + * + * @function: + * FT_Get_CID_From_Glyph_Index + * + * @description: + * Retrieve the CID of the input glyph index. + * + * @input: + * face :: + * A handle to the input face. + * + * glyph_index :: + * The input glyph index. + * + * @output: + * cid :: + * The CID as an @FT_UInt. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * This function only works with CID faces and OpenType fonts, returning + * an error otherwise. + * + * @since: + * 2.3.9 + */ + FT_EXPORT( FT_Error ) + FT_Get_CID_From_Glyph_Index( FT_Face face, + FT_UInt glyph_index, + FT_UInt *cid ); + + /* */ + + +FT_END_HEADER + +#endif /* FTCID_H_ */ + + +/* END */ diff --git a/dependencies/linux64/include/freetype2/freetype/ftcolor.h b/dependencies/linux64/include/freetype2/freetype/ftcolor.h new file mode 100644 index 0000000..8d0a77a --- /dev/null +++ b/dependencies/linux64/include/freetype2/freetype/ftcolor.h @@ -0,0 +1,1676 @@ +/**************************************************************************** + * + * ftcolor.h + * + * FreeType's glyph color management (specification). + * + * Copyright (C) 2018-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + +#ifndef FTCOLOR_H_ +#define FTCOLOR_H_ + +#include + +#ifdef FREETYPE_H +#error "freetype.h of FreeType 1 has been loaded!" +#error "Please fix the directory search order for header files" +#error "so that freetype.h of FreeType 2 is found first." +#endif + + +FT_BEGIN_HEADER + + + /************************************************************************** + * + * @section: + * color_management + * + * @title: + * Glyph Color Management + * + * @abstract: + * Retrieving and manipulating OpenType's 'CPAL' table data. + * + * @description: + * The functions described here allow access and manipulation of color + * palette entries in OpenType's 'CPAL' tables. + */ + + + /************************************************************************** + * + * @struct: + * FT_Color + * + * @description: + * This structure models a BGRA color value of a 'CPAL' palette entry. + * + * The used color space is sRGB; the colors are not pre-multiplied, and + * alpha values must be explicitly set. + * + * @fields: + * blue :: + * Blue value. + * + * green :: + * Green value. + * + * red :: + * Red value. + * + * alpha :: + * Alpha value, giving the red, green, and blue color's opacity. + * + * @since: + * 2.10 + */ + typedef struct FT_Color_ + { + FT_Byte blue; + FT_Byte green; + FT_Byte red; + FT_Byte alpha; + + } FT_Color; + + + /************************************************************************** + * + * @enum: + * FT_PALETTE_XXX + * + * @description: + * A list of bit field constants used in the `palette_flags` array of the + * @FT_Palette_Data structure to indicate for which background a palette + * with a given index is usable. + * + * @values: + * FT_PALETTE_FOR_LIGHT_BACKGROUND :: + * The palette is appropriate to use when displaying the font on a + * light background such as white. + * + * FT_PALETTE_FOR_DARK_BACKGROUND :: + * The palette is appropriate to use when displaying the font on a dark + * background such as black. + * + * @since: + * 2.10 + */ +#define FT_PALETTE_FOR_LIGHT_BACKGROUND 0x01 +#define FT_PALETTE_FOR_DARK_BACKGROUND 0x02 + + + /************************************************************************** + * + * @struct: + * FT_Palette_Data + * + * @description: + * This structure holds the data of the 'CPAL' table. + * + * @fields: + * num_palettes :: + * The number of palettes. + * + * palette_name_ids :: + * An optional read-only array of palette name IDs with `num_palettes` + * elements, corresponding to entries like 'dark' or 'light' in the + * font's 'name' table. + * + * An empty name ID in the 'CPAL' table gets represented as value + * 0xFFFF. + * + * `NULL` if the font's 'CPAL' table doesn't contain appropriate data. + * + * palette_flags :: + * An optional read-only array of palette flags with `num_palettes` + * elements. Possible values are an ORed combination of + * @FT_PALETTE_FOR_LIGHT_BACKGROUND and + * @FT_PALETTE_FOR_DARK_BACKGROUND. + * + * `NULL` if the font's 'CPAL' table doesn't contain appropriate data. + * + * num_palette_entries :: + * The number of entries in a single palette. All palettes have the + * same size. + * + * palette_entry_name_ids :: + * An optional read-only array of palette entry name IDs with + * `num_palette_entries`. In each palette, entries with the same index + * have the same function. For example, index~0 might correspond to + * string 'outline' in the font's 'name' table to indicate that this + * palette entry is used for outlines, index~1 might correspond to + * 'fill' to indicate the filling color palette entry, etc. + * + * An empty entry name ID in the 'CPAL' table gets represented as value + * 0xFFFF. + * + * `NULL` if the font's 'CPAL' table doesn't contain appropriate data. + * + * @note: + * Use function @FT_Get_Sfnt_Name to map name IDs and entry name IDs to + * name strings. + * + * Use function @FT_Palette_Select to get the colors associated with a + * palette entry. + * + * @since: + * 2.10 + */ + typedef struct FT_Palette_Data_ { + FT_UShort num_palettes; + const FT_UShort* palette_name_ids; + const FT_UShort* palette_flags; + + FT_UShort num_palette_entries; + const FT_UShort* palette_entry_name_ids; + + } FT_Palette_Data; + + + /************************************************************************** + * + * @function: + * FT_Palette_Data_Get + * + * @description: + * Retrieve the face's color palette data. + * + * @input: + * face :: + * The source face handle. + * + * @output: + * apalette :: + * A pointer to an @FT_Palette_Data structure. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * All arrays in the returned @FT_Palette_Data structure are read-only. + * + * This function always returns an error if the config macro + * `TT_CONFIG_OPTION_COLOR_LAYERS` is not defined in `ftoption.h`. + * + * @since: + * 2.10 + */ + FT_EXPORT( FT_Error ) + FT_Palette_Data_Get( FT_Face face, + FT_Palette_Data *apalette ); + + + /************************************************************************** + * + * @function: + * FT_Palette_Select + * + * @description: + * This function has two purposes. + * + * (1) It activates a palette for rendering color glyphs, and + * + * (2) it retrieves all (unmodified) color entries of this palette. This + * function returns a read-write array, which means that a calling + * application can modify the palette entries on demand. + * + * A corollary of (2) is that calling the function, then modifying some + * values, then calling the function again with the same arguments resets + * all color entries to the original 'CPAL' values; all user modifications + * are lost. + * + * @input: + * face :: + * The source face handle. + * + * palette_index :: + * The palette index. + * + * @output: + * apalette :: + * An array of color entries for a palette with index `palette_index`, + * having `num_palette_entries` elements (as found in the + * `FT_Palette_Data` structure). If `apalette` is set to `NULL`, no + * array gets returned (and no color entries can be modified). + * + * In case the font doesn't support color palettes, `NULL` is returned. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * The array pointed to by `apalette_entries` is owned and managed by + * FreeType. + * + * This function always returns an error if the config macro + * `TT_CONFIG_OPTION_COLOR_LAYERS` is not defined in `ftoption.h`. + * + * @since: + * 2.10 + */ + FT_EXPORT( FT_Error ) + FT_Palette_Select( FT_Face face, + FT_UShort palette_index, + FT_Color* *apalette ); + + + /************************************************************************** + * + * @function: + * FT_Palette_Set_Foreground_Color + * + * @description: + * 'COLR' uses palette index 0xFFFF to indicate a 'text foreground + * color'. This function sets this value. + * + * @input: + * face :: + * The source face handle. + * + * foreground_color :: + * An `FT_Color` structure to define the text foreground color. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * If this function isn't called, the text foreground color is set to + * white opaque (BGRA value 0xFFFFFFFF) if + * @FT_PALETTE_FOR_DARK_BACKGROUND is present for the current palette, + * and black opaque (BGRA value 0x000000FF) otherwise, including the case + * that no palette types are available in the 'CPAL' table. + * + * This function always returns an error if the config macro + * `TT_CONFIG_OPTION_COLOR_LAYERS` is not defined in `ftoption.h`. + * + * @since: + * 2.10 + */ + FT_EXPORT( FT_Error ) + FT_Palette_Set_Foreground_Color( FT_Face face, + FT_Color foreground_color ); + + + /************************************************************************** + * + * @section: + * layer_management + * + * @title: + * Glyph Layer Management + * + * @abstract: + * Retrieving and manipulating OpenType's 'COLR' table data. + * + * @description: + * The functions described here allow access of colored glyph layer data + * in OpenType's 'COLR' tables. + * + * Note that FreeType does *not* provide rendering in general of glyphs + * that use a 'COLR' table! While FreeType has very limited rendering + * support for 'COLR' v0 tables (without a possibility to change the + * color palette) via @FT_Render_Glyph, there is no such convenience + * code for 'COLR' v1 tables -- while it appears that v1 is simply an + * 'improved' version of v0, this is not the case: it is a completely + * different color font format, and you need a dedicated graphics + * library like Skia or Cairo to handle a v1 table's drawing commands. + */ + + + /************************************************************************** + * + * @struct: + * FT_LayerIterator + * + * @description: + * This iterator object is needed for @FT_Get_Color_Glyph_Layer. + * + * @fields: + * num_layers :: + * The number of glyph layers for the requested glyph index. Will be + * set by @FT_Get_Color_Glyph_Layer. + * + * layer :: + * The current layer. Will be set by @FT_Get_Color_Glyph_Layer. + * + * p :: + * An opaque pointer into 'COLR' table data. The caller must set this + * to `NULL` before the first call of @FT_Get_Color_Glyph_Layer. + */ + typedef struct FT_LayerIterator_ + { + FT_UInt num_layers; + FT_UInt layer; + FT_Byte* p; + + } FT_LayerIterator; + + + /************************************************************************** + * + * @function: + * FT_Get_Color_Glyph_Layer + * + * @description: + * This is an interface to the 'COLR' table in OpenType fonts to + * iteratively retrieve the colored glyph layers associated with the + * current glyph slot. + * + * https://learn.microsoft.com/typography/opentype/spec/colr + * + * The glyph layer data for a given glyph index, if present, provides an + * alternative, multi-color glyph representation: Instead of rendering + * the outline or bitmap with the given glyph index, glyphs with the + * indices and colors returned by this function are rendered layer by + * layer. + * + * The returned elements are ordered in the z~direction from bottom to + * top; the 'n'th element should be rendered with the associated palette + * color and blended on top of the already rendered layers (elements 0, + * 1, ..., n-1). + * + * @input: + * face :: + * A handle to the parent face object. + * + * base_glyph :: + * The glyph index the colored glyph layers are associated with. + * + * @inout: + * iterator :: + * An @FT_LayerIterator object. For the first call you should set + * `iterator->p` to `NULL`. For all following calls, simply use the + * same object again. + * + * @output: + * aglyph_index :: + * The glyph index of the current layer. + * + * acolor_index :: + * The color index into the font face's color palette of the current + * layer. The value 0xFFFF is special; it doesn't reference a palette + * entry but indicates that the text foreground color should be used + * instead (to be set up by the application outside of FreeType). + * + * The color palette can be retrieved with @FT_Palette_Select. + * + * @return: + * Value~1 if everything is OK. If there are no more layers (or if there + * are no layers at all), value~0 gets returned. In case of an error, + * value~0 is returned also. + * + * @note: + * This function is necessary if you want to handle glyph layers by + * yourself. In particular, functions that operate with @FT_GlyphRec + * objects (like @FT_Get_Glyph or @FT_Glyph_To_Bitmap) don't have access + * to this information. + * + * Note that @FT_Render_Glyph is able to handle colored glyph layers + * automatically if the @FT_LOAD_COLOR flag is passed to a previous call + * to @FT_Load_Glyph. [This is an experimental feature.] + * + * @example: + * ``` + * FT_Color* palette; + * FT_LayerIterator iterator; + * + * FT_Bool have_layers; + * FT_UInt layer_glyph_index; + * FT_UInt layer_color_index; + * + * + * error = FT_Palette_Select( face, palette_index, &palette ); + * if ( error ) + * palette = NULL; + * + * iterator.p = NULL; + * have_layers = FT_Get_Color_Glyph_Layer( face, + * glyph_index, + * &layer_glyph_index, + * &layer_color_index, + * &iterator ); + * + * if ( palette && have_layers ) + * { + * do + * { + * FT_Color layer_color; + * + * + * if ( layer_color_index == 0xFFFF ) + * layer_color = text_foreground_color; + * else + * layer_color = palette[layer_color_index]; + * + * // Load and render glyph `layer_glyph_index', then + * // blend resulting pixmap (using color `layer_color') + * // with previously created pixmaps. + * + * } while ( FT_Get_Color_Glyph_Layer( face, + * glyph_index, + * &layer_glyph_index, + * &layer_color_index, + * &iterator ) ); + * } + * ``` + * + * @since: + * 2.10 + */ + FT_EXPORT( FT_Bool ) + FT_Get_Color_Glyph_Layer( FT_Face face, + FT_UInt base_glyph, + FT_UInt *aglyph_index, + FT_UInt *acolor_index, + FT_LayerIterator* iterator ); + + + /************************************************************************** + * + * @enum: + * FT_PaintFormat + * + * @description: + * Enumeration describing the different paint format types of the v1 + * extensions to the 'COLR' table, see + * 'https://github.com/googlefonts/colr-gradients-spec'. + * + * The enumeration values loosely correspond with the format numbers of + * the specification: FreeType always returns a fully specified 'Paint' + * structure for the 'Transform', 'Translate', 'Scale', 'Rotate', and + * 'Skew' table types even though the specification has different formats + * depending on whether or not a center is specified, whether the scale + * is uniform in x and y~direction or not, etc. Also, only non-variable + * format identifiers are listed in this enumeration; as soon as support + * for variable 'COLR' v1 fonts is implemented, interpolation is + * performed dependent on axis coordinates, which are configured on the + * @FT_Face through @FT_Set_Var_Design_Coordinates. This implies that + * always static, readily interpolated values are returned in the 'Paint' + * structures. + * + * @since: + * 2.13 + */ + typedef enum FT_PaintFormat_ + { + FT_COLR_PAINTFORMAT_COLR_LAYERS = 1, + FT_COLR_PAINTFORMAT_SOLID = 2, + FT_COLR_PAINTFORMAT_LINEAR_GRADIENT = 4, + FT_COLR_PAINTFORMAT_RADIAL_GRADIENT = 6, + FT_COLR_PAINTFORMAT_SWEEP_GRADIENT = 8, + FT_COLR_PAINTFORMAT_GLYPH = 10, + FT_COLR_PAINTFORMAT_COLR_GLYPH = 11, + FT_COLR_PAINTFORMAT_TRANSFORM = 12, + FT_COLR_PAINTFORMAT_TRANSLATE = 14, + FT_COLR_PAINTFORMAT_SCALE = 16, + FT_COLR_PAINTFORMAT_ROTATE = 24, + FT_COLR_PAINTFORMAT_SKEW = 28, + FT_COLR_PAINTFORMAT_COMPOSITE = 32, + FT_COLR_PAINT_FORMAT_MAX = 33, + FT_COLR_PAINTFORMAT_UNSUPPORTED = 255 + + } FT_PaintFormat; + + + /************************************************************************** + * + * @struct: + * FT_ColorStopIterator + * + * @description: + * This iterator object is needed for @FT_Get_Colorline_Stops. It keeps + * state while iterating over the stops of an @FT_ColorLine, representing + * the `ColorLine` struct of the v1 extensions to 'COLR', see + * 'https://github.com/googlefonts/colr-gradients-spec'. Do not manually + * modify fields of this iterator. + * + * @fields: + * num_color_stops :: + * The number of color stops for the requested glyph index. Set by + * @FT_Get_Paint. + * + * current_color_stop :: + * The current color stop. Set by @FT_Get_Colorline_Stops. + * + * p :: + * An opaque pointer into 'COLR' table data. Set by @FT_Get_Paint. + * Updated by @FT_Get_Colorline_Stops. + * + * read_variable :: + * A boolean keeping track of whether variable color lines are to be + * read. Set by @FT_Get_Paint. + * + * @since: + * 2.13 + */ + typedef struct FT_ColorStopIterator_ + { + FT_UInt num_color_stops; + FT_UInt current_color_stop; + + FT_Byte* p; + + FT_Bool read_variable; + + } FT_ColorStopIterator; + + + /************************************************************************** + * + * @struct: + * FT_ColorIndex + * + * @description: + * A structure representing a `ColorIndex` value of the 'COLR' v1 + * extensions, see 'https://github.com/googlefonts/colr-gradients-spec'. + * + * @fields: + * palette_index :: + * The palette index into a 'CPAL' palette. + * + * alpha :: + * Alpha transparency value multiplied with the value from 'CPAL'. + * + * @since: + * 2.13 + */ + typedef struct FT_ColorIndex_ + { + FT_UInt16 palette_index; + FT_F2Dot14 alpha; + + } FT_ColorIndex; + + + /************************************************************************** + * + * @struct: + * FT_ColorStop + * + * @description: + * A structure representing a `ColorStop` value of the 'COLR' v1 + * extensions, see 'https://github.com/googlefonts/colr-gradients-spec'. + * + * @fields: + * stop_offset :: + * The stop offset along the gradient, expressed as a 16.16 fixed-point + * coordinate. + * + * color :: + * The color information for this stop, see @FT_ColorIndex. + * + * @since: + * 2.13 + */ + typedef struct FT_ColorStop_ + { + FT_Fixed stop_offset; + FT_ColorIndex color; + + } FT_ColorStop; + + + /************************************************************************** + * + * @enum: + * FT_PaintExtend + * + * @description: + * An enumeration representing the 'Extend' mode of the 'COLR' v1 + * extensions, see 'https://github.com/googlefonts/colr-gradients-spec'. + * It describes how the gradient fill continues at the other boundaries. + * + * @since: + * 2.13 + */ + typedef enum FT_PaintExtend_ + { + FT_COLR_PAINT_EXTEND_PAD = 0, + FT_COLR_PAINT_EXTEND_REPEAT = 1, + FT_COLR_PAINT_EXTEND_REFLECT = 2 + + } FT_PaintExtend; + + + /************************************************************************** + * + * @struct: + * FT_ColorLine + * + * @description: + * A structure representing a `ColorLine` value of the 'COLR' v1 + * extensions, see 'https://github.com/googlefonts/colr-gradients-spec'. + * It describes a list of color stops along the defined gradient. + * + * @fields: + * extend :: + * The extend mode at the outer boundaries, see @FT_PaintExtend. + * + * color_stop_iterator :: + * The @FT_ColorStopIterator used to enumerate and retrieve the + * actual @FT_ColorStop's. + * + * @since: + * 2.13 + */ + typedef struct FT_ColorLine_ + { + FT_PaintExtend extend; + FT_ColorStopIterator color_stop_iterator; + + } FT_ColorLine; + + + /************************************************************************** + * + * @struct: + * FT_Affine23 + * + * @description: + * A structure used to store a 2x3 matrix. Coefficients are in + * 16.16 fixed-point format. The computation performed is + * + * ``` + * x' = x*xx + y*xy + dx + * y' = x*yx + y*yy + dy + * ``` + * + * @fields: + * xx :: + * Matrix coefficient. + * + * xy :: + * Matrix coefficient. + * + * dx :: + * x translation. + * + * yx :: + * Matrix coefficient. + * + * yy :: + * Matrix coefficient. + * + * dy :: + * y translation. + * + * @since: + * 2.13 + */ + typedef struct FT_Affine_23_ + { + FT_Fixed xx, xy, dx; + FT_Fixed yx, yy, dy; + + } FT_Affine23; + + + /************************************************************************** + * + * @enum: + * FT_Composite_Mode + * + * @description: + * An enumeration listing the 'COLR' v1 composite modes used in + * @FT_PaintComposite. For more details on each paint mode, see + * 'https://www.w3.org/TR/compositing-1/#porterduffcompositingoperators'. + * + * @since: + * 2.13 + */ + typedef enum FT_Composite_Mode_ + { + FT_COLR_COMPOSITE_CLEAR = 0, + FT_COLR_COMPOSITE_SRC = 1, + FT_COLR_COMPOSITE_DEST = 2, + FT_COLR_COMPOSITE_SRC_OVER = 3, + FT_COLR_COMPOSITE_DEST_OVER = 4, + FT_COLR_COMPOSITE_SRC_IN = 5, + FT_COLR_COMPOSITE_DEST_IN = 6, + FT_COLR_COMPOSITE_SRC_OUT = 7, + FT_COLR_COMPOSITE_DEST_OUT = 8, + FT_COLR_COMPOSITE_SRC_ATOP = 9, + FT_COLR_COMPOSITE_DEST_ATOP = 10, + FT_COLR_COMPOSITE_XOR = 11, + FT_COLR_COMPOSITE_PLUS = 12, + FT_COLR_COMPOSITE_SCREEN = 13, + FT_COLR_COMPOSITE_OVERLAY = 14, + FT_COLR_COMPOSITE_DARKEN = 15, + FT_COLR_COMPOSITE_LIGHTEN = 16, + FT_COLR_COMPOSITE_COLOR_DODGE = 17, + FT_COLR_COMPOSITE_COLOR_BURN = 18, + FT_COLR_COMPOSITE_HARD_LIGHT = 19, + FT_COLR_COMPOSITE_SOFT_LIGHT = 20, + FT_COLR_COMPOSITE_DIFFERENCE = 21, + FT_COLR_COMPOSITE_EXCLUSION = 22, + FT_COLR_COMPOSITE_MULTIPLY = 23, + FT_COLR_COMPOSITE_HSL_HUE = 24, + FT_COLR_COMPOSITE_HSL_SATURATION = 25, + FT_COLR_COMPOSITE_HSL_COLOR = 26, + FT_COLR_COMPOSITE_HSL_LUMINOSITY = 27, + FT_COLR_COMPOSITE_MAX = 28 + + } FT_Composite_Mode; + + + /************************************************************************** + * + * @struct: + * FT_OpaquePaint + * + * @description: + * A structure representing an offset to a `Paint` value stored in any + * of the paint tables of a 'COLR' v1 font. Compare Offset<24> there. + * When 'COLR' v1 paint tables represented by FreeType objects such as + * @FT_PaintColrLayers, @FT_PaintComposite, or @FT_PaintTransform + * reference downstream nested paint tables, we do not immediately + * retrieve them but encapsulate their location in this type. Use + * @FT_Get_Paint to retrieve the actual @FT_COLR_Paint object that + * describes the details of the respective paint table. + * + * @fields: + * p :: + * An internal offset to a Paint table, needs to be set to NULL before + * passing this struct as an argument to @FT_Get_Paint. + * + * insert_root_transform :: + * An internal boolean to track whether an initial root transform is + * to be provided. Do not set this value. + * + * @since: + * 2.13 + */ + typedef struct FT_Opaque_Paint_ + { + FT_Byte* p; + FT_Bool insert_root_transform; + } FT_OpaquePaint; + + + /************************************************************************** + * + * @struct: + * FT_PaintColrLayers + * + * @description: + * A structure representing a `PaintColrLayers` table of a 'COLR' v1 + * font. This table describes a set of layers that are to be composited + * with composite mode `FT_COLR_COMPOSITE_SRC_OVER`. The return value + * of this function is an @FT_LayerIterator initialized so that it can + * be used with @FT_Get_Paint_Layers to retrieve the @FT_OpaquePaint + * objects as references to each layer. + * + * @fields: + * layer_iterator :: + * The layer iterator that describes the layers of this paint. + * + * @since: + * 2.13 + */ + typedef struct FT_PaintColrLayers_ + { + FT_LayerIterator layer_iterator; + + } FT_PaintColrLayers; + + + /************************************************************************** + * + * @struct: + * FT_PaintSolid + * + * @description: + * A structure representing a `PaintSolid` value of the 'COLR' v1 + * extensions, see 'https://github.com/googlefonts/colr-gradients-spec'. + * Using a `PaintSolid` value means that the glyph layer filled with + * this paint is solid-colored and does not contain a gradient. + * + * @fields: + * color :: + * The color information for this solid paint, see @FT_ColorIndex. + * + * @since: + * 2.13 + */ + typedef struct FT_PaintSolid_ + { + FT_ColorIndex color; + + } FT_PaintSolid; + + + /************************************************************************** + * + * @struct: + * FT_PaintLinearGradient + * + * @description: + * A structure representing a `PaintLinearGradient` value of the 'COLR' + * v1 extensions, see + * 'https://github.com/googlefonts/colr-gradients-spec'. The glyph + * layer filled with this paint is drawn filled with a linear gradient. + * + * @fields: + * colorline :: + * The @FT_ColorLine information for this paint, i.e., the list of + * color stops along the gradient. + * + * p0 :: + * The starting point of the gradient definition in font units + * represented as a 16.16 fixed-point `FT_Vector`. + * + * p1 :: + * The end point of the gradient definition in font units + * represented as a 16.16 fixed-point `FT_Vector`. + * + * p2 :: + * Optional point~p2 to rotate the gradient in font units + * represented as a 16.16 fixed-point `FT_Vector`. + * Otherwise equal to~p0. + * + * @since: + * 2.13 + */ + typedef struct FT_PaintLinearGradient_ + { + FT_ColorLine colorline; + + /* TODO: Potentially expose those as x0, y0 etc. */ + FT_Vector p0; + FT_Vector p1; + FT_Vector p2; + + } FT_PaintLinearGradient; + + + /************************************************************************** + * + * @struct: + * FT_PaintRadialGradient + * + * @description: + * A structure representing a `PaintRadialGradient` value of the 'COLR' + * v1 extensions, see + * 'https://github.com/googlefonts/colr-gradients-spec'. The glyph + * layer filled with this paint is drawn filled with a radial gradient. + * + * @fields: + * colorline :: + * The @FT_ColorLine information for this paint, i.e., the list of + * color stops along the gradient. + * + * c0 :: + * The center of the starting point of the radial gradient in font + * units represented as a 16.16 fixed-point `FT_Vector`. + * + * r0 :: + * The radius of the starting circle of the radial gradient in font + * units represented as a 16.16 fixed-point value. + * + * c1 :: + * The center of the end point of the radial gradient in font units + * represented as a 16.16 fixed-point `FT_Vector`. + * + * r1 :: + * The radius of the end circle of the radial gradient in font + * units represented as a 16.16 fixed-point value. + * + * @since: + * 2.13 + */ + typedef struct FT_PaintRadialGradient_ + { + FT_ColorLine colorline; + + FT_Vector c0; + FT_Pos r0; + FT_Vector c1; + FT_Pos r1; + + } FT_PaintRadialGradient; + + + /************************************************************************** + * + * @struct: + * FT_PaintSweepGradient + * + * @description: + * A structure representing a `PaintSweepGradient` value of the 'COLR' + * v1 extensions, see + * 'https://github.com/googlefonts/colr-gradients-spec'. The glyph + * layer filled with this paint is drawn filled with a sweep gradient + * from `start_angle` to `end_angle`. + * + * @fields: + * colorline :: + * The @FT_ColorLine information for this paint, i.e., the list of + * color stops along the gradient. + * + * center :: + * The center of the sweep gradient in font units represented as a + * vector of 16.16 fixed-point values. + * + * start_angle :: + * The start angle of the sweep gradient in 16.16 fixed-point + * format specifying degrees divided by 180.0 (as in the + * spec). Multiply by 180.0f to receive degrees value. Values are + * given counter-clockwise, starting from the (positive) y~axis. + * + * end_angle :: + * The end angle of the sweep gradient in 16.16 fixed-point + * format specifying degrees divided by 180.0 (as in the + * spec). Multiply by 180.0f to receive degrees value. Values are + * given counter-clockwise, starting from the (positive) y~axis. + * + * @since: + * 2.13 + */ + typedef struct FT_PaintSweepGradient_ + { + FT_ColorLine colorline; + + FT_Vector center; + FT_Fixed start_angle; + FT_Fixed end_angle; + + } FT_PaintSweepGradient; + + + /************************************************************************** + * + * @struct: + * FT_PaintGlyph + * + * @description: + * A structure representing a 'COLR' v1 `PaintGlyph` paint table. + * + * @fields: + * paint :: + * An opaque paint object pointing to a `Paint` table that serves as + * the fill for the glyph ID. + * + * glyphID :: + * The glyph ID from the 'glyf' table, which serves as the contour + * information that is filled with paint. + * + * @since: + * 2.13 + */ + typedef struct FT_PaintGlyph_ + { + FT_OpaquePaint paint; + FT_UInt glyphID; + + } FT_PaintGlyph; + + + /************************************************************************** + * + * @struct: + * FT_PaintColrGlyph + * + * @description: + * A structure representing a 'COLR' v1 `PaintColorGlyph` paint table. + * + * @fields: + * glyphID :: + * The glyph ID from the `BaseGlyphV1List` table that is drawn for + * this paint. + * + * @since: + * 2.13 + */ + typedef struct FT_PaintColrGlyph_ + { + FT_UInt glyphID; + + } FT_PaintColrGlyph; + + + /************************************************************************** + * + * @struct: + * FT_PaintTransform + * + * @description: + * A structure representing a 'COLR' v1 `PaintTransform` paint table. + * + * @fields: + * paint :: + * An opaque paint that is subject to being transformed. + * + * affine :: + * A 2x3 transformation matrix in @FT_Affine23 format containing + * 16.16 fixed-point values. + * + * @since: + * 2.13 + */ + typedef struct FT_PaintTransform_ + { + FT_OpaquePaint paint; + FT_Affine23 affine; + + } FT_PaintTransform; + + + /************************************************************************** + * + * @struct: + * FT_PaintTranslate + * + * @description: + * A structure representing a 'COLR' v1 `PaintTranslate` paint table. + * Used for translating downstream paints by a given x and y~delta. + * + * @fields: + * paint :: + * An @FT_OpaquePaint object referencing the paint that is to be + * rotated. + * + * dx :: + * Translation in x~direction in font units represented as a + * 16.16 fixed-point value. + * + * dy :: + * Translation in y~direction in font units represented as a + * 16.16 fixed-point value. + * + * @since: + * 2.13 + */ + typedef struct FT_PaintTranslate_ + { + FT_OpaquePaint paint; + + FT_Fixed dx; + FT_Fixed dy; + + } FT_PaintTranslate; + + + /************************************************************************** + * + * @struct: + * FT_PaintScale + * + * @description: + * A structure representing all of the 'COLR' v1 'PaintScale*' paint + * tables. Used for scaling downstream paints by a given x and y~scale, + * with a given center. This structure is used for all 'PaintScale*' + * types that are part of specification; fields of this structure are + * filled accordingly. If there is a center, the center values are set, + * otherwise they are set to the zero coordinate. If the source font + * file has 'PaintScaleUniform*' set, the scale values are set + * accordingly to the same value. + * + * @fields: + * paint :: + * An @FT_OpaquePaint object referencing the paint that is to be + * scaled. + * + * scale_x :: + * Scale factor in x~direction represented as a + * 16.16 fixed-point value. + * + * scale_y :: + * Scale factor in y~direction represented as a + * 16.16 fixed-point value. + * + * center_x :: + * x~coordinate of center point to scale from represented as a + * 16.16 fixed-point value. + * + * center_y :: + * y~coordinate of center point to scale from represented as a + * 16.16 fixed-point value. + * + * @since: + * 2.13 + */ + typedef struct FT_PaintScale_ + { + FT_OpaquePaint paint; + + FT_Fixed scale_x; + FT_Fixed scale_y; + + FT_Fixed center_x; + FT_Fixed center_y; + + } FT_PaintScale; + + + /************************************************************************** + * + * @struct: + * FT_PaintRotate + * + * @description: + * A structure representing a 'COLR' v1 `PaintRotate` paint table. Used + * for rotating downstream paints with a given center and angle. + * + * @fields: + * paint :: + * An @FT_OpaquePaint object referencing the paint that is to be + * rotated. + * + * angle :: + * The rotation angle that is to be applied in degrees divided by + * 180.0 (as in the spec) represented as a 16.16 fixed-point + * value. Multiply by 180.0f to receive degrees value. + * + * center_x :: + * The x~coordinate of the pivot point of the rotation in font + * units represented as a 16.16 fixed-point value. + * + * center_y :: + * The y~coordinate of the pivot point of the rotation in font + * units represented as a 16.16 fixed-point value. + * + * @since: + * 2.13 + */ + + typedef struct FT_PaintRotate_ + { + FT_OpaquePaint paint; + + FT_Fixed angle; + + FT_Fixed center_x; + FT_Fixed center_y; + + } FT_PaintRotate; + + + /************************************************************************** + * + * @struct: + * FT_PaintSkew + * + * @description: + * A structure representing a 'COLR' v1 `PaintSkew` paint table. Used + * for skewing or shearing downstream paints by a given center and + * angle. + * + * @fields: + * paint :: + * An @FT_OpaquePaint object referencing the paint that is to be + * skewed. + * + * x_skew_angle :: + * The skewing angle in x~direction in degrees divided by 180.0 + * (as in the spec) represented as a 16.16 fixed-point + * value. Multiply by 180.0f to receive degrees. + * + * y_skew_angle :: + * The skewing angle in y~direction in degrees divided by 180.0 + * (as in the spec) represented as a 16.16 fixed-point + * value. Multiply by 180.0f to receive degrees. + * + * center_x :: + * The x~coordinate of the pivot point of the skew in font units + * represented as a 16.16 fixed-point value. + * + * center_y :: + * The y~coordinate of the pivot point of the skew in font units + * represented as a 16.16 fixed-point value. + * + * @since: + * 2.13 + */ + typedef struct FT_PaintSkew_ + { + FT_OpaquePaint paint; + + FT_Fixed x_skew_angle; + FT_Fixed y_skew_angle; + + FT_Fixed center_x; + FT_Fixed center_y; + + } FT_PaintSkew; + + + /************************************************************************** + * + * @struct: + * FT_PaintComposite + * + * @description: + * A structure representing a 'COLR' v1 `PaintComposite` paint table. + * Used for compositing two paints in a 'COLR' v1 directed acyclic graph. + * + * @fields: + * source_paint :: + * An @FT_OpaquePaint object referencing the source that is to be + * composited. + * + * composite_mode :: + * An @FT_Composite_Mode enum value determining the composition + * operation. + * + * backdrop_paint :: + * An @FT_OpaquePaint object referencing the backdrop paint that + * `source_paint` is composited onto. + * + * @since: + * 2.13 + */ + typedef struct FT_PaintComposite_ + { + FT_OpaquePaint source_paint; + FT_Composite_Mode composite_mode; + FT_OpaquePaint backdrop_paint; + + } FT_PaintComposite; + + + /************************************************************************** + * + * @union: + * FT_COLR_Paint + * + * @description: + * A union object representing format and details of a paint table of a + * 'COLR' v1 font, see + * 'https://github.com/googlefonts/colr-gradients-spec'. Use + * @FT_Get_Paint to retrieve a @FT_COLR_Paint for an @FT_OpaquePaint + * object. + * + * @fields: + * format :: + * The gradient format for this Paint structure. + * + * u :: + * Union of all paint table types: + * + * * @FT_PaintColrLayers + * * @FT_PaintGlyph + * * @FT_PaintSolid + * * @FT_PaintLinearGradient + * * @FT_PaintRadialGradient + * * @FT_PaintSweepGradient + * * @FT_PaintTransform + * * @FT_PaintTranslate + * * @FT_PaintRotate + * * @FT_PaintSkew + * * @FT_PaintComposite + * * @FT_PaintColrGlyph + * + * @since: + * 2.13 + */ + typedef struct FT_COLR_Paint_ + { + FT_PaintFormat format; + + union + { + FT_PaintColrLayers colr_layers; + FT_PaintGlyph glyph; + FT_PaintSolid solid; + FT_PaintLinearGradient linear_gradient; + FT_PaintRadialGradient radial_gradient; + FT_PaintSweepGradient sweep_gradient; + FT_PaintTransform transform; + FT_PaintTranslate translate; + FT_PaintScale scale; + FT_PaintRotate rotate; + FT_PaintSkew skew; + FT_PaintComposite composite; + FT_PaintColrGlyph colr_glyph; + + } u; + + } FT_COLR_Paint; + + + /************************************************************************** + * + * @enum: + * FT_Color_Root_Transform + * + * @description: + * An enumeration to specify whether @FT_Get_Color_Glyph_Paint is to + * return a root transform to configure the client's graphics context + * matrix. + * + * @values: + * FT_COLOR_INCLUDE_ROOT_TRANSFORM :: + * Do include the root transform as the initial @FT_COLR_Paint object. + * + * FT_COLOR_NO_ROOT_TRANSFORM :: + * Do not output an initial root transform. + * + * @since: + * 2.13 + */ + typedef enum FT_Color_Root_Transform_ + { + FT_COLOR_INCLUDE_ROOT_TRANSFORM, + FT_COLOR_NO_ROOT_TRANSFORM, + + FT_COLOR_ROOT_TRANSFORM_MAX + + } FT_Color_Root_Transform; + + + /************************************************************************** + * + * @struct: + * FT_ClipBox + * + * @description: + * A structure representing a 'COLR' v1 'ClipBox' table. 'COLR' v1 + * glyphs may optionally define a clip box for aiding allocation or + * defining a maximum drawable region. Use @FT_Get_Color_Glyph_ClipBox + * to retrieve it. + * + * @fields: + * bottom_left :: + * The bottom left corner of the clip box as an @FT_Vector with + * fixed-point coordinates in 26.6 format. + * + * top_left :: + * The top left corner of the clip box as an @FT_Vector with + * fixed-point coordinates in 26.6 format. + * + * top_right :: + * The top right corner of the clip box as an @FT_Vector with + * fixed-point coordinates in 26.6 format. + * + * bottom_right :: + * The bottom right corner of the clip box as an @FT_Vector with + * fixed-point coordinates in 26.6 format. + * + * @since: + * 2.13 + */ + typedef struct FT_ClipBox_ + { + FT_Vector bottom_left; + FT_Vector top_left; + FT_Vector top_right; + FT_Vector bottom_right; + + } FT_ClipBox; + + + /************************************************************************** + * + * @function: + * FT_Get_Color_Glyph_Paint + * + * @description: + * This is the starting point and interface to color gradient + * information in a 'COLR' v1 table in OpenType fonts to recursively + * retrieve the paint tables for the directed acyclic graph of a colored + * glyph, given a glyph ID. + * + * https://github.com/googlefonts/colr-gradients-spec + * + * In a 'COLR' v1 font, each color glyph defines a directed acyclic + * graph of nested paint tables, such as `PaintGlyph`, `PaintSolid`, + * `PaintLinearGradient`, `PaintRadialGradient`, and so on. Using this + * function and specifying a glyph ID, one retrieves the root paint + * table for this glyph ID. + * + * This function allows control whether an initial root transform is + * returned to configure scaling, transform, and translation correctly + * on the client's graphics context. The initial root transform is + * computed and returned according to the values configured for @FT_Size + * and @FT_Set_Transform on the @FT_Face object, see below for details + * of the `root_transform` parameter. This has implications for a + * client 'COLR' v1 implementation: When this function returns an + * initially computed root transform, at the time of executing the + * @FT_PaintGlyph operation, the contours should be retrieved using + * @FT_Load_Glyph at unscaled, untransformed size. This is because the + * root transform applied to the graphics context will take care of + * correct scaling. + * + * Alternatively, to allow hinting of contours, at the time of executing + * @FT_Load_Glyph, the current graphics context transformation matrix + * can be decomposed into a scaling matrix and a remainder, and + * @FT_Load_Glyph can be used to retrieve the contours at scaled size. + * Care must then be taken to blit or clip to the graphics context with + * taking this remainder transformation into account. + * + * @input: + * face :: + * A handle to the parent face object. + * + * base_glyph :: + * The glyph index for which to retrieve the root paint table. + * + * root_transform :: + * Specifies whether an initially computed root is returned by the + * @FT_PaintTransform operation to account for the activated size + * (see @FT_Activate_Size) and the configured transform and translate + * (see @FT_Set_Transform). + * + * This root transform is returned before nodes of the glyph graph of + * the font are returned. Subsequent @FT_COLR_Paint structures + * contain unscaled and untransformed values. The inserted root + * transform enables the client application to apply an initial + * transform to its graphics context. When executing subsequent + * FT_COLR_Paint operations, values from @FT_COLR_Paint operations + * will ultimately be correctly scaled because of the root transform + * applied to the graphics context. Use + * @FT_COLOR_INCLUDE_ROOT_TRANSFORM to include the root transform, use + * @FT_COLOR_NO_ROOT_TRANSFORM to not include it. The latter may be + * useful when traversing the 'COLR' v1 glyph graph and reaching a + * @FT_PaintColrGlyph. When recursing into @FT_PaintColrGlyph and + * painting that inline, no additional root transform is needed as it + * has already been applied to the graphics context at the beginning + * of drawing this glyph. + * + * @output: + * paint :: + * The @FT_OpaquePaint object that references the actual paint table. + * + * The respective actual @FT_COLR_Paint object is retrieved via + * @FT_Get_Paint. + * + * @return: + * Value~1 if everything is OK. If no color glyph is found, or the root + * paint could not be retrieved, value~0 gets returned. In case of an + * error, value~0 is returned also. + * + * @since: + * 2.13 + */ + FT_EXPORT( FT_Bool ) + FT_Get_Color_Glyph_Paint( FT_Face face, + FT_UInt base_glyph, + FT_Color_Root_Transform root_transform, + FT_OpaquePaint* paint ); + + + /************************************************************************** + * + * @function: + * FT_Get_Color_Glyph_ClipBox + * + * @description: + * Search for a 'COLR' v1 clip box for the specified `base_glyph` and + * fill the `clip_box` parameter with the 'COLR' v1 'ClipBox' information + * if one is found. + * + * @input: + * face :: + * A handle to the parent face object. + * + * base_glyph :: + * The glyph index for which to retrieve the clip box. + * + * @output: + * clip_box :: + * The clip box for the requested `base_glyph` if one is found. The + * clip box is computed taking scale and transformations configured on + * the @FT_Face into account. @FT_ClipBox contains @FT_Vector values + * in 26.6 format. + * + * @return: + * Value~1 if a clip box is found. If no clip box is found or an error + * occurred, value~0 is returned. + * + * @note: + * To retrieve the clip box in font units, reset scale to units-per-em + * and remove transforms configured using @FT_Set_Transform. + * + * @since: + * 2.13 + */ + FT_EXPORT( FT_Bool ) + FT_Get_Color_Glyph_ClipBox( FT_Face face, + FT_UInt base_glyph, + FT_ClipBox* clip_box ); + + + /************************************************************************** + * + * @function: + * FT_Get_Paint_Layers + * + * @description: + * Access the layers of a `PaintColrLayers` table. + * + * If the root paint of a color glyph, or a nested paint of a 'COLR' + * glyph is a `PaintColrLayers` table, this function retrieves the + * layers of the `PaintColrLayers` table. + * + * The @FT_PaintColrLayers object contains an @FT_LayerIterator, which + * is used here to iterate over the layers. Each layer is returned as + * an @FT_OpaquePaint object, which then can be used with @FT_Get_Paint + * to retrieve the actual paint object. + * + * @input: + * face :: + * A handle to the parent face object. + * + * @inout: + * iterator :: + * The @FT_LayerIterator from an @FT_PaintColrLayers object, for which + * the layers are to be retrieved. The internal state of the iterator + * is incremented after one call to this function for retrieving one + * layer. + * + * @output: + * paint :: + * The @FT_OpaquePaint object that references the actual paint table. + * The respective actual @FT_COLR_Paint object is retrieved via + * @FT_Get_Paint. + * + * @return: + * Value~1 if everything is OK. Value~0 gets returned when the paint + * object can not be retrieved or any other error occurs. + * + * @since: + * 2.13 + */ + FT_EXPORT( FT_Bool ) + FT_Get_Paint_Layers( FT_Face face, + FT_LayerIterator* iterator, + FT_OpaquePaint* paint ); + + + /************************************************************************** + * + * @function: + * FT_Get_Colorline_Stops + * + * @description: + * This is an interface to color gradient information in a 'COLR' v1 + * table in OpenType fonts to iteratively retrieve the gradient and + * solid fill information for colored glyph layers for a specified glyph + * ID. + * + * https://github.com/googlefonts/colr-gradients-spec + * + * @input: + * face :: + * A handle to the parent face object. + * + * @inout: + * iterator :: + * The retrieved @FT_ColorStopIterator, configured on an @FT_ColorLine, + * which in turn got retrieved via paint information in + * @FT_PaintLinearGradient or @FT_PaintRadialGradient. + * + * @output: + * color_stop :: + * Color index and alpha value for the retrieved color stop. + * + * @return: + * Value~1 if everything is OK. If there are no more color stops, + * value~0 gets returned. In case of an error, value~0 is returned + * also. + * + * @since: + * 2.13 + */ + FT_EXPORT( FT_Bool ) + FT_Get_Colorline_Stops( FT_Face face, + FT_ColorStop* color_stop, + FT_ColorStopIterator* iterator ); + + + /************************************************************************** + * + * @function: + * FT_Get_Paint + * + * @description: + * Access the details of a paint using an @FT_OpaquePaint opaque paint + * object, which internally stores the offset to the respective `Paint` + * object in the 'COLR' table. + * + * @input: + * face :: + * A handle to the parent face object. + * + * opaque_paint :: + * The opaque paint object for which the underlying @FT_COLR_Paint + * data is to be retrieved. + * + * @output: + * paint :: + * The specific @FT_COLR_Paint object containing information coming + * from one of the font's `Paint*` tables. + * + * @return: + * Value~1 if everything is OK. Value~0 if no details can be found for + * this paint or any other error occurred. + * + * @since: + * 2.13 + */ + FT_EXPORT( FT_Bool ) + FT_Get_Paint( FT_Face face, + FT_OpaquePaint opaque_paint, + FT_COLR_Paint* paint ); + + /* */ + + +FT_END_HEADER + +#endif /* FTCOLOR_H_ */ + + +/* END */ diff --git a/dependencies/linux64/include/freetype2/freetype/ftdriver.h b/dependencies/linux64/include/freetype2/freetype/ftdriver.h new file mode 100644 index 0000000..3e84687 --- /dev/null +++ b/dependencies/linux64/include/freetype2/freetype/ftdriver.h @@ -0,0 +1,1320 @@ +/**************************************************************************** + * + * ftdriver.h + * + * FreeType API for controlling driver modules (specification only). + * + * Copyright (C) 2017-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + +#ifndef FTDRIVER_H_ +#define FTDRIVER_H_ + +#include +#include + +#ifdef FREETYPE_H +#error "freetype.h of FreeType 1 has been loaded!" +#error "Please fix the directory search order for header files" +#error "so that freetype.h of FreeType 2 is found first." +#endif + + +FT_BEGIN_HEADER + + + /************************************************************************** + * + * @section: + * auto_hinter + * + * @title: + * The auto-hinter + * + * @abstract: + * Controlling the auto-hinting module. + * + * @description: + * While FreeType's auto-hinter doesn't expose API functions by itself, + * it is possible to control its behaviour with @FT_Property_Set and + * @FT_Property_Get. The following lists the available properties + * together with the necessary macros and structures. + * + * Note that the auto-hinter's module name is 'autofitter' for historical + * reasons. + * + * Available properties are @increase-x-height, @no-stem-darkening + * (experimental), @darkening-parameters (experimental), + * @glyph-to-script-map (experimental), @fallback-script (experimental), + * and @default-script (experimental), as documented in the @properties + * section. + * + */ + + + /************************************************************************** + * + * @section: + * cff_driver + * + * @title: + * The CFF driver + * + * @abstract: + * Controlling the CFF driver module. + * + * @description: + * While FreeType's CFF driver doesn't expose API functions by itself, it + * is possible to control its behaviour with @FT_Property_Set and + * @FT_Property_Get. + * + * The CFF driver's module name is 'cff'. + * + * Available properties are @hinting-engine, @no-stem-darkening, + * @darkening-parameters, and @random-seed, as documented in the + * @properties section. + * + * + * **Hinting and anti-aliasing principles of the new engine** + * + * The rasterizer is positioning horizontal features (e.g., ascender + * height & x-height, or crossbars) on the pixel grid and minimizing the + * amount of anti-aliasing applied to them, while placing vertical + * features (vertical stems) on the pixel grid without hinting, thus + * representing the stem position and weight accurately. Sometimes the + * vertical stems may be only partially black. In this context, + * 'anti-aliasing' means that stems are not positioned exactly on pixel + * borders, causing a fuzzy appearance. + * + * There are two principles behind this approach. + * + * 1) No hinting in the horizontal direction: Unlike 'superhinted' + * TrueType, which changes glyph widths to accommodate regular + * inter-glyph spacing, Adobe's approach is 'faithful to the design' in + * representing both the glyph width and the inter-glyph spacing designed + * for the font. This makes the screen display as close as it can be to + * the result one would get with infinite resolution, while preserving + * what is considered the key characteristics of each glyph. Note that + * the distances between unhinted and grid-fitted positions at small + * sizes are comparable to kerning values and thus would be noticeable + * (and distracting) while reading if hinting were applied. + * + * One of the reasons to not hint horizontally is anti-aliasing for LCD + * screens: The pixel geometry of modern displays supplies three vertical + * subpixels as the eye moves horizontally across each visible pixel. On + * devices where we can be certain this characteristic is present a + * rasterizer can take advantage of the subpixels to add increments of + * weight. In Western writing systems this turns out to be the more + * critical direction anyway; the weights and spacing of vertical stems + * (see above) are central to Armenian, Cyrillic, Greek, and Latin type + * designs. Even when the rasterizer uses greyscale anti-aliasing instead + * of color (a necessary compromise when one doesn't know the screen + * characteristics), the unhinted vertical features preserve the design's + * weight and spacing much better than aliased type would. + * + * 2) Alignment in the vertical direction: Weights and spacing along the + * y~axis are less critical; what is much more important is the visual + * alignment of related features (like cap-height and x-height). The + * sense of alignment for these is enhanced by the sharpness of grid-fit + * edges, while the cruder vertical resolution (full pixels instead of + * 1/3 pixels) is less of a problem. + * + * On the technical side, horizontal alignment zones for ascender, + * x-height, and other important height values (traditionally called + * 'blue zones') as defined in the font are positioned independently, + * each being rounded to the nearest pixel edge, taking care of overshoot + * suppression at small sizes, stem darkening, and scaling. + * + * Hstems (that is, hint values defined in the font to help align + * horizontal features) that fall within a blue zone are said to be + * 'captured' and are aligned to that zone. Uncaptured stems are moved + * in one of four ways, top edge up or down, bottom edge up or down. + * Unless there are conflicting hstems, the smallest movement is taken to + * minimize distortion. + * + */ + + + /************************************************************************** + * + * @section: + * pcf_driver + * + * @title: + * The PCF driver + * + * @abstract: + * Controlling the PCF driver module. + * + * @description: + * While FreeType's PCF driver doesn't expose API functions by itself, it + * is possible to control its behaviour with @FT_Property_Set and + * @FT_Property_Get. Right now, there is a single property + * @no-long-family-names available if FreeType is compiled with + * PCF_CONFIG_OPTION_LONG_FAMILY_NAMES. + * + * The PCF driver's module name is 'pcf'. + * + */ + + + /************************************************************************** + * + * @section: + * t1_cid_driver + * + * @title: + * The Type 1 and CID drivers + * + * @abstract: + * Controlling the Type~1 and CID driver modules. + * + * @description: + * It is possible to control the behaviour of FreeType's Type~1 and + * Type~1 CID drivers with @FT_Property_Set and @FT_Property_Get. + * + * Behind the scenes, both drivers use the Adobe CFF engine for hinting; + * however, the used properties must be specified separately. + * + * The Type~1 driver's module name is 'type1'; the CID driver's module + * name is 't1cid'. + * + * Available properties are @hinting-engine, @no-stem-darkening, + * @darkening-parameters, and @random-seed, as documented in the + * @properties section. + * + * Please see the @cff_driver section for more details on the new hinting + * engine. + * + */ + + + /************************************************************************** + * + * @section: + * tt_driver + * + * @title: + * The TrueType driver + * + * @abstract: + * Controlling the TrueType driver module. + * + * @description: + * While FreeType's TrueType driver doesn't expose API functions by + * itself, it is possible to control its behaviour with @FT_Property_Set + * and @FT_Property_Get. + * + * The TrueType driver's module name is 'truetype'; a single property + * @interpreter-version is available, as documented in the @properties + * section. + * + * To help understand the differences between interpreter versions, we + * introduce a list of definitions, kindly provided by Greg Hitchcock. + * + * _Bi-Level Rendering_ + * + * Monochromatic rendering, exclusively used in the early days of + * TrueType by both Apple and Microsoft. Microsoft's GDI interface + * supported hinting of the right-side bearing point, such that the + * advance width could be non-linear. Most often this was done to + * achieve some level of glyph symmetry. To enable reasonable + * performance (e.g., not having to run hinting on all glyphs just to get + * the widths) there was a bit in the head table indicating if the side + * bearing was hinted, and additional tables, 'hdmx' and 'LTSH', to cache + * hinting widths across multiple sizes and device aspect ratios. + * + * _Font Smoothing_ + * + * Microsoft's GDI implementation of anti-aliasing. Not traditional + * anti-aliasing as the outlines were hinted before the sampling. The + * widths matched the bi-level rendering. + * + * _ClearType Rendering_ + * + * Technique that uses physical subpixels to improve rendering on LCD + * (and other) displays. Because of the higher resolution, many methods + * of improving symmetry in glyphs through hinting the right-side bearing + * were no longer necessary. This lead to what GDI calls 'natural + * widths' ClearType, see + * http://rastertragedy.com/RTRCh4.htm#Sec21. Since hinting + * has extra resolution, most non-linearity went away, but it is still + * possible for hints to change the advance widths in this mode. + * + * _ClearType Compatible Widths_ + * + * One of the earliest challenges with ClearType was allowing the + * implementation in GDI to be selected without requiring all UI and + * documents to reflow. To address this, a compatible method of + * rendering ClearType was added where the font hints are executed once + * to determine the width in bi-level rendering, and then re-run in + * ClearType, with the difference in widths being absorbed in the font + * hints for ClearType (mostly in the white space of hints); see + * http://rastertragedy.com/RTRCh4.htm#Sec20. Somewhat by + * definition, compatible width ClearType allows for non-linear widths, + * but only when the bi-level version has non-linear widths. + * + * _ClearType Subpixel Positioning_ + * + * One of the nice benefits of ClearType is the ability to more crisply + * display fractional widths; unfortunately, the GDI model of integer + * bitmaps did not support this. However, the WPF and Direct Write + * frameworks do support fractional widths. DWrite calls this 'natural + * mode', not to be confused with GDI's 'natural widths'. Subpixel + * positioning, in the current implementation of Direct Write, + * unfortunately does not support hinted advance widths, see + * http://rastertragedy.com/RTRCh4.htm#Sec22. Note that the + * TrueType interpreter fully allows the advance width to be adjusted in + * this mode, just the DWrite client will ignore those changes. + * + * _ClearType Backward Compatibility_ + * + * This is a set of exceptions made in the TrueType interpreter to + * minimize hinting techniques that were problematic with the extra + * resolution of ClearType; see + * http://rastertragedy.com/RTRCh4.htm#Sec1 and + * https://learn.microsoft.com/typography/cleartype/truetypecleartype. + * This technique is not to be confused with ClearType compatible widths. + * ClearType backward compatibility has no direct impact on changing + * advance widths, but there might be an indirect impact on disabling + * some deltas. This could be worked around in backward compatibility + * mode. + * + * _Native ClearType Mode_ + * + * (Not to be confused with 'natural widths'.) This mode removes all the + * exceptions in the TrueType interpreter when running with ClearType. + * Any issues on widths would still apply, though. + * + */ + + + /************************************************************************** + * + * @section: + * ot_svg_driver + * + * @title: + * The SVG driver + * + * @abstract: + * Controlling the external rendering of OT-SVG glyphs. + * + * @description: + * By default, FreeType can only load the 'SVG~' table of OpenType fonts + * if configuration macro `FT_CONFIG_OPTION_SVG` is defined. To make it + * render SVG glyphs, an external SVG rendering library is needed. All + * details on the interface between FreeType and the external library + * via function hooks can be found in section @svg_fonts. + * + * The OT-SVG driver's module name is 'ot-svg'; it supports a single + * property called @svg-hooks, documented below in the @properties + * section. + * + */ + + + /************************************************************************** + * + * @section: + * properties + * + * @title: + * Driver properties + * + * @abstract: + * Controlling driver modules. + * + * @description: + * Driver modules can be controlled by setting and unsetting properties, + * using the functions @FT_Property_Set and @FT_Property_Get. This + * section documents the available properties, together with auxiliary + * macros and structures. + * + */ + + + /************************************************************************** + * + * @enum: + * FT_HINTING_XXX + * + * @description: + * A list of constants used for the @hinting-engine property to select + * the hinting engine for CFF, Type~1, and CID fonts. + * + * @values: + * FT_HINTING_FREETYPE :: + * Use the old FreeType hinting engine. + * + * FT_HINTING_ADOBE :: + * Use the hinting engine contributed by Adobe. + * + * @since: + * 2.9 + * + */ +#define FT_HINTING_FREETYPE 0 +#define FT_HINTING_ADOBE 1 + + /* these constants (introduced in 2.4.12) are deprecated */ +#define FT_CFF_HINTING_FREETYPE FT_HINTING_FREETYPE +#define FT_CFF_HINTING_ADOBE FT_HINTING_ADOBE + + + /************************************************************************** + * + * @property: + * hinting-engine + * + * @description: + * Thanks to Adobe, which contributed a new hinting (and parsing) engine, + * an application can select between 'freetype' and 'adobe' if compiled + * with `CFF_CONFIG_OPTION_OLD_ENGINE`. If this configuration macro + * isn't defined, 'hinting-engine' does nothing. + * + * The same holds for the Type~1 and CID modules if compiled with + * `T1_CONFIG_OPTION_OLD_ENGINE`. + * + * For the 'cff' module, the default engine is 'adobe'. For both the + * 'type1' and 't1cid' modules, the default engine is 'adobe', too. + * + * @note: + * This property can be used with @FT_Property_Get also. + * + * This property can be set via the `FREETYPE_PROPERTIES` environment + * variable (using values 'adobe' or 'freetype'). + * + * @example: + * The following example code demonstrates how to select Adobe's hinting + * engine for the 'cff' module (omitting the error handling). + * + * ``` + * FT_Library library; + * FT_UInt hinting_engine = FT_HINTING_ADOBE; + * + * + * FT_Init_FreeType( &library ); + * + * FT_Property_Set( library, "cff", + * "hinting-engine", &hinting_engine ); + * ``` + * + * @since: + * 2.4.12 (for 'cff' module) + * + * 2.9 (for 'type1' and 't1cid' modules) + * + */ + + + /************************************************************************** + * + * @property: + * no-stem-darkening + * + * @description: + * All glyphs that pass through the auto-hinter will be emboldened unless + * this property is set to TRUE. The same is true for the CFF, Type~1, + * and CID font modules if the 'Adobe' engine is selected (which is the + * default). + * + * Stem darkening emboldens glyphs at smaller sizes to make them more + * readable on common low-DPI screens when using linear alpha blending + * and gamma correction, see @FT_Render_Glyph. When not using linear + * alpha blending and gamma correction, glyphs will appear heavy and + * fuzzy! + * + * Gamma correction essentially lightens fonts since shades of grey are + * shifted to higher pixel values (=~higher brightness) to match the + * original intention to the reality of our screens. The side-effect is + * that glyphs 'thin out'. Mac OS~X and Adobe's proprietary font + * rendering library implement a counter-measure: stem darkening at + * smaller sizes where shades of gray dominate. By emboldening a glyph + * slightly in relation to its pixel size, individual pixels get higher + * coverage of filled-in outlines and are therefore 'blacker'. This + * counteracts the 'thinning out' of glyphs, making text remain readable + * at smaller sizes. + * + * For the auto-hinter, stem-darkening is experimental currently and thus + * switched off by default (that is, `no-stem-darkening` is set to TRUE + * by default). Total consistency with the CFF driver is not achieved + * right now because the emboldening method differs and glyphs must be + * scaled down on the Y-axis to keep outline points inside their + * precomputed blue zones. The smaller the size (especially 9ppem and + * down), the higher the loss of emboldening versus the CFF driver. + * + * Note that stem darkening is never applied if @FT_LOAD_NO_SCALE is set. + * + * @note: + * This property can be used with @FT_Property_Get also. + * + * This property can be set via the `FREETYPE_PROPERTIES` environment + * variable (using values 1 and 0 for 'on' and 'off', respectively). It + * can also be set per face using @FT_Face_Properties with + * @FT_PARAM_TAG_STEM_DARKENING. + * + * @example: + * ``` + * FT_Library library; + * FT_Bool no_stem_darkening = TRUE; + * + * + * FT_Init_FreeType( &library ); + * + * FT_Property_Set( library, "cff", + * "no-stem-darkening", &no_stem_darkening ); + * ``` + * + * @since: + * 2.4.12 (for 'cff' module) + * + * 2.6.2 (for 'autofitter' module) + * + * 2.9 (for 'type1' and 't1cid' modules) + * + */ + + + /************************************************************************** + * + * @property: + * darkening-parameters + * + * @description: + * By default, the Adobe hinting engine, as used by the CFF, Type~1, and + * CID font drivers, darkens stems as follows (if the `no-stem-darkening` + * property isn't set): + * + * ``` + * stem width <= 0.5px: darkening amount = 0.4px + * stem width = 1px: darkening amount = 0.275px + * stem width = 1.667px: darkening amount = 0.275px + * stem width >= 2.333px: darkening amount = 0px + * ``` + * + * and piecewise linear in-between. At configuration time, these four + * control points can be set with the macro + * `CFF_CONFIG_OPTION_DARKENING_PARAMETERS`; the CFF, Type~1, and CID + * drivers share these values. At runtime, the control points can be + * changed using the `darkening-parameters` property (see the example + * below that demonstrates this for the Type~1 driver). + * + * The x~values give the stem width, and the y~values the darkening + * amount. The unit is 1000th of pixels. All coordinate values must be + * positive; the x~values must be monotonically increasing; the y~values + * must be monotonically decreasing and smaller than or equal to 500 + * (corresponding to half a pixel); the slope of each linear piece must + * be shallower than -1 (e.g., -.4). + * + * The auto-hinter provides this property, too, as an experimental + * feature. See @no-stem-darkening for more. + * + * @note: + * This property can be used with @FT_Property_Get also. + * + * This property can be set via the `FREETYPE_PROPERTIES` environment + * variable, using eight comma-separated integers without spaces. Here + * the above example, using `\` to break the line for readability. + * + * ``` + * FREETYPE_PROPERTIES=\ + * type1:darkening-parameters=500,300,1000,200,1500,100,2000,0 + * ``` + * + * @example: + * ``` + * FT_Library library; + * FT_Int darken_params[8] = { 500, 300, // x1, y1 + * 1000, 200, // x2, y2 + * 1500, 100, // x3, y3 + * 2000, 0 }; // x4, y4 + * + * + * FT_Init_FreeType( &library ); + * + * FT_Property_Set( library, "type1", + * "darkening-parameters", darken_params ); + * ``` + * + * @since: + * 2.5.1 (for 'cff' module) + * + * 2.6.2 (for 'autofitter' module) + * + * 2.9 (for 'type1' and 't1cid' modules) + * + */ + + + /************************************************************************** + * + * @property: + * random-seed + * + * @description: + * By default, the seed value for the CFF 'random' operator and the + * similar '0 28 callothersubr pop' command for the Type~1 and CID + * drivers is set to a random value. However, mainly for debugging + * purposes, it is often necessary to use a known value as a seed so that + * the pseudo-random number sequences generated by 'random' are + * repeatable. + * + * The `random-seed` property does that. Its argument is a signed 32bit + * integer; if the value is zero or negative, the seed given by the + * `intitialRandomSeed` private DICT operator in a CFF file gets used (or + * a default value if there is no such operator). If the value is + * positive, use it instead of `initialRandomSeed`, which is consequently + * ignored. + * + * @note: + * This property can be set via the `FREETYPE_PROPERTIES` environment + * variable. It can also be set per face using @FT_Face_Properties with + * @FT_PARAM_TAG_RANDOM_SEED. + * + * @since: + * 2.8 (for 'cff' module) + * + * 2.9 (for 'type1' and 't1cid' modules) + * + */ + + + /************************************************************************** + * + * @property: + * no-long-family-names + * + * @description: + * If `PCF_CONFIG_OPTION_LONG_FAMILY_NAMES` is active while compiling + * FreeType, the PCF driver constructs long family names. + * + * There are many PCF fonts just called 'Fixed' which look completely + * different, and which have nothing to do with each other. When + * selecting 'Fixed' in KDE or Gnome one gets results that appear rather + * random, the style changes often if one changes the size and one cannot + * select some fonts at all. The improve this situation, the PCF module + * prepends the foundry name (plus a space) to the family name. It also + * checks whether there are 'wide' characters; all put together, family + * names like 'Sony Fixed' or 'Misc Fixed Wide' are constructed. + * + * If `no-long-family-names` is set, this feature gets switched off. + * + * @note: + * This property can be used with @FT_Property_Get also. + * + * This property can be set via the `FREETYPE_PROPERTIES` environment + * variable (using values 1 and 0 for 'on' and 'off', respectively). + * + * @example: + * ``` + * FT_Library library; + * FT_Bool no_long_family_names = TRUE; + * + * + * FT_Init_FreeType( &library ); + * + * FT_Property_Set( library, "pcf", + * "no-long-family-names", + * &no_long_family_names ); + * ``` + * + * @since: + * 2.8 + */ + + + /************************************************************************** + * + * @enum: + * TT_INTERPRETER_VERSION_XXX + * + * @description: + * A list of constants used for the @interpreter-version property to + * select the hinting engine for Truetype fonts. + * + * The numeric value in the constant names represents the version number + * as returned by the 'GETINFO' bytecode instruction. + * + * @values: + * TT_INTERPRETER_VERSION_35 :: + * Version~35 corresponds to MS rasterizer v.1.7 as used e.g. in + * Windows~98; only grayscale and B/W rasterizing is supported. + * + * TT_INTERPRETER_VERSION_38 :: + * Version~38 is the same Version~40. The original 'Infinality' code is + * no longer available. + * + * TT_INTERPRETER_VERSION_40 :: + * Version~40 corresponds to MS rasterizer v.2.1; it is roughly + * equivalent to the hinting provided by DirectWrite ClearType (as can + * be found, for example, in Microsoft's Edge Browser on Windows~10). + * It is used in FreeType to select the 'minimal' subpixel hinting + * code, a stripped-down and higher performance version of the + * 'Infinality' code. + * + * @note: + * This property controls the behaviour of the bytecode interpreter and + * thus how outlines get hinted. It does **not** control how glyph get + * rasterized! In particular, it does not control subpixel color + * filtering. + * + * If FreeType has not been compiled with the configuration option + * `TT_CONFIG_OPTION_SUBPIXEL_HINTING`, selecting version~38 or~40 causes + * an `FT_Err_Unimplemented_Feature` error. + * + * Depending on the graphics framework, Microsoft uses different bytecode + * and rendering engines. As a consequence, the version numbers returned + * by a call to the 'GETINFO' bytecode instruction are more convoluted + * than desired. + * + * Here are two tables that try to shed some light on the possible values + * for the MS rasterizer engine, together with the additional features + * introduced by it. + * + * ``` + * GETINFO framework version feature + * ------------------------------------------------------------------- + * 3 GDI (Win 3.1), v1.0 16-bit, first version + * TrueImage + * 33 GDI (Win NT 3.1), v1.5 32-bit + * HP Laserjet + * 34 GDI (Win 95) v1.6 font smoothing, + * new SCANTYPE opcode + * 35 GDI (Win 98/2000) v1.7 (UN)SCALED_COMPONENT_OFFSET + * bits in composite glyphs + * 36 MGDI (Win CE 2) v1.6+ classic ClearType + * 37 GDI (XP and later), v1.8 ClearType + * GDI+ old (before Vista) + * 38 GDI+ old (Vista, Win 7), v1.9 subpixel ClearType, + * WPF Y-direction ClearType, + * additional error checking + * 39 DWrite (before Win 8) v2.0 subpixel ClearType flags + * in GETINFO opcode, + * bug fixes + * 40 GDI+ (after Win 7), v2.1 Y-direction ClearType flag + * DWrite (Win 8) in GETINFO opcode, + * Gray ClearType + * ``` + * + * The 'version' field gives a rough orientation only, since some + * applications provided certain features much earlier (as an example, + * Microsoft Reader used subpixel and Y-direction ClearType already in + * Windows 2000). Similarly, updates to a given framework might include + * improved hinting support. + * + * ``` + * version sampling rendering comment + * x y x y + * -------------------------------------------------------------- + * v1.0 normal normal B/W B/W bi-level + * v1.6 high high gray gray grayscale + * v1.8 high normal color-filter B/W (GDI) ClearType + * v1.9 high high color-filter gray Color ClearType + * v2.1 high normal gray B/W Gray ClearType + * v2.1 high high gray gray Gray ClearType + * ``` + * + * Color and Gray ClearType are the two available variants of + * 'Y-direction ClearType', meaning grayscale rasterization along the + * Y-direction; the name used in the TrueType specification for this + * feature is 'symmetric smoothing'. 'Classic ClearType' is the original + * algorithm used before introducing a modified version in Win~XP. + * Another name for v1.6's grayscale rendering is 'font smoothing', and + * 'Color ClearType' is sometimes also called 'DWrite ClearType'. To + * differentiate between today's Color ClearType and the earlier + * ClearType variant with B/W rendering along the vertical axis, the + * latter is sometimes called 'GDI ClearType'. + * + * 'Normal' and 'high' sampling describe the (virtual) resolution to + * access the rasterized outline after the hinting process. 'Normal' + * means 1 sample per grid line (i.e., B/W). In the current Microsoft + * implementation, 'high' means an extra virtual resolution of 16x16 (or + * 16x1) grid lines per pixel for bytecode instructions like 'MIRP'. + * After hinting, these 16 grid lines are mapped to 6x5 (or 6x1) grid + * lines for color filtering if Color ClearType is activated. + * + * Note that 'Gray ClearType' is essentially the same as v1.6's grayscale + * rendering. However, the GETINFO instruction handles it differently: + * v1.6 returns bit~12 (hinting for grayscale), while v2.1 returns + * bits~13 (hinting for ClearType), 18 (symmetrical smoothing), and~19 + * (Gray ClearType). Also, this mode respects bits 2 and~3 for the + * version~1 gasp table exclusively (like Color ClearType), while v1.6 + * only respects the values of version~0 (bits 0 and~1). + * + * Keep in mind that the features of the above interpreter versions might + * not map exactly to FreeType features or behavior because it is a + * fundamentally different library with different internals. + * + */ +#define TT_INTERPRETER_VERSION_35 35 +#define TT_INTERPRETER_VERSION_38 38 +#define TT_INTERPRETER_VERSION_40 40 + + + /************************************************************************** + * + * @property: + * interpreter-version + * + * @description: + * Currently, three versions are available, two representing the bytecode + * interpreter with subpixel hinting support (old 'Infinality' code and + * new stripped-down and higher performance 'minimal' code) and one + * without, respectively. The default is subpixel support if + * `TT_CONFIG_OPTION_SUBPIXEL_HINTING` is defined, and no subpixel + * support otherwise (since it isn't available then). + * + * If subpixel hinting is on, many TrueType bytecode instructions behave + * differently compared to B/W or grayscale rendering (except if 'native + * ClearType' is selected by the font). Microsoft's main idea is to + * render at a much increased horizontal resolution, then sampling down + * the created output to subpixel precision. However, many older fonts + * are not suited to this and must be specially taken care of by applying + * (hardcoded) tweaks in Microsoft's interpreter. + * + * Details on subpixel hinting and some of the necessary tweaks can be + * found in Greg Hitchcock's whitepaper at + * 'https://learn.microsoft.com/typography/cleartype/truetypecleartype'. + * Note that FreeType currently doesn't really 'subpixel hint' (6x1, 6x2, + * or 6x5 supersampling) like discussed in the paper. Depending on the + * chosen interpreter, it simply ignores instructions on vertical stems + * to arrive at very similar results. + * + * @note: + * This property can be used with @FT_Property_Get also. + * + * This property can be set via the `FREETYPE_PROPERTIES` environment + * variable (using values '35', '38', or '40'). + * + * @example: + * The following example code demonstrates how to deactivate subpixel + * hinting (omitting the error handling). + * + * ``` + * FT_Library library; + * FT_Face face; + * FT_UInt interpreter_version = TT_INTERPRETER_VERSION_35; + * + * + * FT_Init_FreeType( &library ); + * + * FT_Property_Set( library, "truetype", + * "interpreter-version", + * &interpreter_version ); + * ``` + * + * @since: + * 2.5 + */ + + + /************************************************************************** + * + * @property: + * spread + * + * @description: + * This property of the 'sdf' and 'bsdf' renderers defines how the signed + * distance field (SDF) is represented in the output bitmap. The output + * values are calculated as follows, '128 * ( SDF / spread + 1 )', with + * the result clamped to the 8-bit range [0..255]. Therefore, 'spread' + * is also the maximum euclidean distance from the edge after which the + * values are clamped. The spread is specified in pixels with the + * default value of 8. For accurate SDF texture mapping (interpolation), + * the spread should be large enough to accommodate the target grid unit. + * + * @example: + * The following example code demonstrates how to set the SDF spread + * (omitting the error handling). + * + * ``` + * FT_Library library; + * FT_Int spread = 2; + * + * + * FT_Init_FreeType( &library ); + * + * FT_Property_Set( library, "sdf", "spread", &spread ); + * ``` + * + * @note: + * FreeType has two rasterizers for generating SDF, namely: + * + * 1. `sdf` for generating SDF directly from glyph's outline, and + * + * 2. `bsdf` for generating SDF from rasterized bitmaps. + * + * Depending on the glyph type (i.e., outline or bitmap), one of the two + * rasterizers is chosen at runtime and used for generating SDFs. To + * force the use of `bsdf` you should render the glyph with any of the + * FreeType's other rendering modes (e.g., `FT_RENDER_MODE_NORMAL`) and + * then re-render with `FT_RENDER_MODE_SDF`. + * + * There are some issues with stability and possible failures of the SDF + * renderers (specifically `sdf`). + * + * 1. The `sdf` rasterizer is sensitive to really small features (e.g., + * sharp turns that are less than 1~pixel) and imperfections in the + * glyph's outline, causing artifacts in the final output. + * + * 2. The `sdf` rasterizer has limited support for handling intersecting + * contours and *cannot* handle self-intersecting contours whatsoever. + * Self-intersection happens when a single connected contour + * intersects itself at some point; having these in your font + * definitely poses a problem to the rasterizer and cause artifacts, + * too. + * + * 3. Generating SDF for really small glyphs may result in undesirable + * output; the pixel grid (which stores distance information) becomes + * too coarse. + * + * 4. Since the output buffer is normalized, precision at smaller spreads + * is greater than precision at larger spread values because the + * output range of [0..255] gets mapped to a smaller SDF range. A + * spread of~2 should be sufficient in most cases. + * + * Points (1) and (2) can be avoided by using the `bsdf` rasterizer, + * which is more stable than the `sdf` rasterizer in general. + * + * @since: + * 2.11 + */ + + + /************************************************************************** + * + * @property: + * svg-hooks + * + * @description: + * Set up the interface between FreeType and an extern SVG rendering + * library like 'librsvg'. All details on the function hooks can be + * found in section @svg_fonts. + * + * @example: + * The following example code expects that the four hook functions + * `svg_*` are defined elsewhere. Error handling is omitted, too. + * + * ``` + * FT_Library library; + * SVG_RendererHooks hooks = { + * (SVG_Lib_Init_Func)svg_init, + * (SVG_Lib_Free_Func)svg_free, + * (SVG_Lib_Render_Func)svg_render, + * (SVG_Lib_Preset_Slot_Func)svg_preset_slot }; + * + * + * FT_Init_FreeType( &library ); + * + * FT_Property_Set( library, "ot-svg", + * "svg-hooks", &hooks ); + * ``` + * + * @since: + * 2.12 + */ + + + /************************************************************************** + * + * @property: + * glyph-to-script-map + * + * @description: + * **Experimental only** + * + * The auto-hinter provides various script modules to hint glyphs. + * Examples of supported scripts are Latin or CJK. Before a glyph is + * auto-hinted, the Unicode character map of the font gets examined, and + * the script is then determined based on Unicode character ranges, see + * below. + * + * OpenType fonts, however, often provide much more glyphs than character + * codes (small caps, superscripts, ligatures, swashes, etc.), to be + * controlled by so-called 'features'. Handling OpenType features can be + * quite complicated and thus needs a separate library on top of + * FreeType. + * + * The mapping between glyph indices and scripts (in the auto-hinter + * sense, see the @FT_AUTOHINTER_SCRIPT_XXX values) is stored as an array + * with `num_glyphs` elements, as found in the font's @FT_Face structure. + * The `glyph-to-script-map` property returns a pointer to this array, + * which can be modified as needed. Note that the modification should + * happen before the first glyph gets processed by the auto-hinter so + * that the global analysis of the font shapes actually uses the modified + * mapping. + * + * @example: + * The following example code demonstrates how to access it (omitting the + * error handling). + * + * ``` + * FT_Library library; + * FT_Face face; + * FT_Prop_GlyphToScriptMap prop; + * + * + * FT_Init_FreeType( &library ); + * FT_New_Face( library, "foo.ttf", 0, &face ); + * + * prop.face = face; + * + * FT_Property_Get( library, "autofitter", + * "glyph-to-script-map", &prop ); + * + * // adjust `prop.map' as needed right here + * + * FT_Load_Glyph( face, ..., FT_LOAD_FORCE_AUTOHINT ); + * ``` + * + * @since: + * 2.4.11 + * + */ + + + /************************************************************************** + * + * @enum: + * FT_AUTOHINTER_SCRIPT_XXX + * + * @description: + * **Experimental only** + * + * A list of constants used for the @glyph-to-script-map property to + * specify the script submodule the auto-hinter should use for hinting a + * particular glyph. + * + * @values: + * FT_AUTOHINTER_SCRIPT_NONE :: + * Don't auto-hint this glyph. + * + * FT_AUTOHINTER_SCRIPT_LATIN :: + * Apply the latin auto-hinter. For the auto-hinter, 'latin' is a very + * broad term, including Cyrillic and Greek also since characters from + * those scripts share the same design constraints. + * + * By default, characters from the following Unicode ranges are + * assigned to this submodule. + * + * ``` + * U+0020 - U+007F // Basic Latin (no control characters) + * U+00A0 - U+00FF // Latin-1 Supplement (no control characters) + * U+0100 - U+017F // Latin Extended-A + * U+0180 - U+024F // Latin Extended-B + * U+0250 - U+02AF // IPA Extensions + * U+02B0 - U+02FF // Spacing Modifier Letters + * U+0300 - U+036F // Combining Diacritical Marks + * U+0370 - U+03FF // Greek and Coptic + * U+0400 - U+04FF // Cyrillic + * U+0500 - U+052F // Cyrillic Supplement + * U+1D00 - U+1D7F // Phonetic Extensions + * U+1D80 - U+1DBF // Phonetic Extensions Supplement + * U+1DC0 - U+1DFF // Combining Diacritical Marks Supplement + * U+1E00 - U+1EFF // Latin Extended Additional + * U+1F00 - U+1FFF // Greek Extended + * U+2000 - U+206F // General Punctuation + * U+2070 - U+209F // Superscripts and Subscripts + * U+20A0 - U+20CF // Currency Symbols + * U+2150 - U+218F // Number Forms + * U+2460 - U+24FF // Enclosed Alphanumerics + * U+2C60 - U+2C7F // Latin Extended-C + * U+2DE0 - U+2DFF // Cyrillic Extended-A + * U+2E00 - U+2E7F // Supplemental Punctuation + * U+A640 - U+A69F // Cyrillic Extended-B + * U+A720 - U+A7FF // Latin Extended-D + * U+FB00 - U+FB06 // Alphab. Present. Forms (Latin Ligatures) + * U+1D400 - U+1D7FF // Mathematical Alphanumeric Symbols + * U+1F100 - U+1F1FF // Enclosed Alphanumeric Supplement + * ``` + * + * FT_AUTOHINTER_SCRIPT_CJK :: + * Apply the CJK auto-hinter, covering Chinese, Japanese, Korean, old + * Vietnamese, and some other scripts. + * + * By default, characters from the following Unicode ranges are + * assigned to this submodule. + * + * ``` + * U+1100 - U+11FF // Hangul Jamo + * U+2E80 - U+2EFF // CJK Radicals Supplement + * U+2F00 - U+2FDF // Kangxi Radicals + * U+2FF0 - U+2FFF // Ideographic Description Characters + * U+3000 - U+303F // CJK Symbols and Punctuation + * U+3040 - U+309F // Hiragana + * U+30A0 - U+30FF // Katakana + * U+3100 - U+312F // Bopomofo + * U+3130 - U+318F // Hangul Compatibility Jamo + * U+3190 - U+319F // Kanbun + * U+31A0 - U+31BF // Bopomofo Extended + * U+31C0 - U+31EF // CJK Strokes + * U+31F0 - U+31FF // Katakana Phonetic Extensions + * U+3200 - U+32FF // Enclosed CJK Letters and Months + * U+3300 - U+33FF // CJK Compatibility + * U+3400 - U+4DBF // CJK Unified Ideographs Extension A + * U+4DC0 - U+4DFF // Yijing Hexagram Symbols + * U+4E00 - U+9FFF // CJK Unified Ideographs + * U+A960 - U+A97F // Hangul Jamo Extended-A + * U+AC00 - U+D7AF // Hangul Syllables + * U+D7B0 - U+D7FF // Hangul Jamo Extended-B + * U+F900 - U+FAFF // CJK Compatibility Ideographs + * U+FE10 - U+FE1F // Vertical forms + * U+FE30 - U+FE4F // CJK Compatibility Forms + * U+FF00 - U+FFEF // Halfwidth and Fullwidth Forms + * U+1B000 - U+1B0FF // Kana Supplement + * U+1D300 - U+1D35F // Tai Xuan Hing Symbols + * U+1F200 - U+1F2FF // Enclosed Ideographic Supplement + * U+20000 - U+2A6DF // CJK Unified Ideographs Extension B + * U+2A700 - U+2B73F // CJK Unified Ideographs Extension C + * U+2B740 - U+2B81F // CJK Unified Ideographs Extension D + * U+2F800 - U+2FA1F // CJK Compatibility Ideographs Supplement + * ``` + * + * FT_AUTOHINTER_SCRIPT_INDIC :: + * Apply the indic auto-hinter, covering all major scripts from the + * Indian sub-continent and some other related scripts like Thai, Lao, + * or Tibetan. + * + * By default, characters from the following Unicode ranges are + * assigned to this submodule. + * + * ``` + * U+0900 - U+0DFF // Indic Range + * U+0F00 - U+0FFF // Tibetan + * U+1900 - U+194F // Limbu + * U+1B80 - U+1BBF // Sundanese + * U+A800 - U+A82F // Syloti Nagri + * U+ABC0 - U+ABFF // Meetei Mayek + * U+11800 - U+118DF // Sharada + * ``` + * + * Note that currently Indic support is rudimentary only, missing blue + * zone support. + * + * @since: + * 2.4.11 + * + */ +#define FT_AUTOHINTER_SCRIPT_NONE 0 +#define FT_AUTOHINTER_SCRIPT_LATIN 1 +#define FT_AUTOHINTER_SCRIPT_CJK 2 +#define FT_AUTOHINTER_SCRIPT_INDIC 3 + + + /************************************************************************** + * + * @struct: + * FT_Prop_GlyphToScriptMap + * + * @description: + * **Experimental only** + * + * The data exchange structure for the @glyph-to-script-map property. + * + * @since: + * 2.4.11 + * + */ + typedef struct FT_Prop_GlyphToScriptMap_ + { + FT_Face face; + FT_UShort* map; + + } FT_Prop_GlyphToScriptMap; + + + /************************************************************************** + * + * @property: + * fallback-script + * + * @description: + * **Experimental only** + * + * If no auto-hinter script module can be assigned to a glyph, a fallback + * script gets assigned to it (see also the @glyph-to-script-map + * property). By default, this is @FT_AUTOHINTER_SCRIPT_CJK. Using the + * `fallback-script` property, this fallback value can be changed. + * + * @note: + * This property can be used with @FT_Property_Get also. + * + * It's important to use the right timing for changing this value: The + * creation of the glyph-to-script map that eventually uses the fallback + * script value gets triggered either by setting or reading a + * face-specific property like @glyph-to-script-map, or by auto-hinting + * any glyph from that face. In particular, if you have already created + * an @FT_Face structure but not loaded any glyph (using the + * auto-hinter), a change of the fallback script will affect this face. + * + * @example: + * ``` + * FT_Library library; + * FT_UInt fallback_script = FT_AUTOHINTER_SCRIPT_NONE; + * + * + * FT_Init_FreeType( &library ); + * + * FT_Property_Set( library, "autofitter", + * "fallback-script", &fallback_script ); + * ``` + * + * @since: + * 2.4.11 + * + */ + + + /************************************************************************** + * + * @property: + * default-script + * + * @description: + * **Experimental only** + * + * If FreeType gets compiled with `FT_CONFIG_OPTION_USE_HARFBUZZ` to make + * the HarfBuzz library access OpenType features for getting better glyph + * coverages, this property sets the (auto-fitter) script to be used for + * the default (OpenType) script data of a font's GSUB table. Features + * for the default script are intended for all scripts not explicitly + * handled in GSUB; an example is a 'dlig' feature, containing the + * combination of the characters 'T', 'E', and 'L' to form a 'TEL' + * ligature. + * + * By default, this is @FT_AUTOHINTER_SCRIPT_LATIN. Using the + * `default-script` property, this default value can be changed. + * + * @note: + * This property can be used with @FT_Property_Get also. + * + * It's important to use the right timing for changing this value: The + * creation of the glyph-to-script map that eventually uses the default + * script value gets triggered either by setting or reading a + * face-specific property like @glyph-to-script-map, or by auto-hinting + * any glyph from that face. In particular, if you have already created + * an @FT_Face structure but not loaded any glyph (using the + * auto-hinter), a change of the default script will affect this face. + * + * @example: + * ``` + * FT_Library library; + * FT_UInt default_script = FT_AUTOHINTER_SCRIPT_NONE; + * + * + * FT_Init_FreeType( &library ); + * + * FT_Property_Set( library, "autofitter", + * "default-script", &default_script ); + * ``` + * + * @since: + * 2.5.3 + * + */ + + + /************************************************************************** + * + * @property: + * increase-x-height + * + * @description: + * For ppem values in the range 6~<= ppem <= `increase-x-height`, round + * up the font's x~height much more often than normally. If the value is + * set to~0, which is the default, this feature is switched off. Use + * this property to improve the legibility of small font sizes if + * necessary. + * + * @note: + * This property can be used with @FT_Property_Get also. + * + * Set this value right after calling @FT_Set_Char_Size, but before + * loading any glyph (using the auto-hinter). + * + * @example: + * ``` + * FT_Library library; + * FT_Face face; + * FT_Prop_IncreaseXHeight prop; + * + * + * FT_Init_FreeType( &library ); + * FT_New_Face( library, "foo.ttf", 0, &face ); + * FT_Set_Char_Size( face, 10 * 64, 0, 72, 0 ); + * + * prop.face = face; + * prop.limit = 14; + * + * FT_Property_Set( library, "autofitter", + * "increase-x-height", &prop ); + * ``` + * + * @since: + * 2.4.11 + * + */ + + + /************************************************************************** + * + * @struct: + * FT_Prop_IncreaseXHeight + * + * @description: + * The data exchange structure for the @increase-x-height property. + * + */ + typedef struct FT_Prop_IncreaseXHeight_ + { + FT_Face face; + FT_UInt limit; + + } FT_Prop_IncreaseXHeight; + + + /************************************************************************** + * + * @property: + * warping + * + * @description: + * **Obsolete** + * + * This property was always experimental and probably never worked + * correctly. It was entirely removed from the FreeType~2 sources. This + * entry is only here for historical reference. + * + * Warping only worked in 'normal' auto-hinting mode replacing it. The + * idea of the code was to slightly scale and shift a glyph along the + * non-hinted dimension (which is usually the horizontal axis) so that as + * much of its segments were aligned (more or less) to the grid. To find + * out a glyph's optimal scaling and shifting value, various parameter + * combinations were tried and scored. + * + * @since: + * 2.6 + * + */ + + + /* */ + + +FT_END_HEADER + + +#endif /* FTDRIVER_H_ */ + + +/* END */ diff --git a/dependencies/linux64/include/freetype2/freetype/fterrdef.h b/dependencies/linux64/include/freetype2/freetype/fterrdef.h new file mode 100644 index 0000000..710ca91 --- /dev/null +++ b/dependencies/linux64/include/freetype2/freetype/fterrdef.h @@ -0,0 +1,283 @@ +/**************************************************************************** + * + * fterrdef.h + * + * FreeType error codes (specification). + * + * Copyright (C) 2002-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + + /************************************************************************** + * + * @section: + * error_code_values + * + * @title: + * Error Code Values + * + * @abstract: + * All possible error codes returned by FreeType functions. + * + * @description: + * The list below is taken verbatim from the file `fterrdef.h` (loaded + * automatically by including `FT_FREETYPE_H`). The first argument of the + * `FT_ERROR_DEF_` macro is the error label; by default, the prefix + * `FT_Err_` gets added so that you get error names like + * `FT_Err_Cannot_Open_Resource`. The second argument is the error code, + * and the last argument an error string, which is not used by FreeType. + * + * Within your application you should **only** use error names and + * **never** its numeric values! The latter might (and actually do) + * change in forthcoming FreeType versions. + * + * Macro `FT_NOERRORDEF_` defines `FT_Err_Ok`, which is always zero. See + * the 'Error Enumerations' subsection how to automatically generate a + * list of error strings. + * + */ + + + /************************************************************************** + * + * @enum: + * FT_Err_XXX + * + */ + + /* generic errors */ + + FT_NOERRORDEF_( Ok, 0x00, + "no error" ) + + FT_ERRORDEF_( Cannot_Open_Resource, 0x01, + "cannot open resource" ) + FT_ERRORDEF_( Unknown_File_Format, 0x02, + "unknown file format" ) + FT_ERRORDEF_( Invalid_File_Format, 0x03, + "broken file" ) + FT_ERRORDEF_( Invalid_Version, 0x04, + "invalid FreeType version" ) + FT_ERRORDEF_( Lower_Module_Version, 0x05, + "module version is too low" ) + FT_ERRORDEF_( Invalid_Argument, 0x06, + "invalid argument" ) + FT_ERRORDEF_( Unimplemented_Feature, 0x07, + "unimplemented feature" ) + FT_ERRORDEF_( Invalid_Table, 0x08, + "broken table" ) + FT_ERRORDEF_( Invalid_Offset, 0x09, + "broken offset within table" ) + FT_ERRORDEF_( Array_Too_Large, 0x0A, + "array allocation size too large" ) + FT_ERRORDEF_( Missing_Module, 0x0B, + "missing module" ) + FT_ERRORDEF_( Missing_Property, 0x0C, + "missing property" ) + + /* glyph/character errors */ + + FT_ERRORDEF_( Invalid_Glyph_Index, 0x10, + "invalid glyph index" ) + FT_ERRORDEF_( Invalid_Character_Code, 0x11, + "invalid character code" ) + FT_ERRORDEF_( Invalid_Glyph_Format, 0x12, + "unsupported glyph image format" ) + FT_ERRORDEF_( Cannot_Render_Glyph, 0x13, + "cannot render this glyph format" ) + FT_ERRORDEF_( Invalid_Outline, 0x14, + "invalid outline" ) + FT_ERRORDEF_( Invalid_Composite, 0x15, + "invalid composite glyph" ) + FT_ERRORDEF_( Too_Many_Hints, 0x16, + "too many hints" ) + FT_ERRORDEF_( Invalid_Pixel_Size, 0x17, + "invalid pixel size" ) + FT_ERRORDEF_( Invalid_SVG_Document, 0x18, + "invalid SVG document" ) + + /* handle errors */ + + FT_ERRORDEF_( Invalid_Handle, 0x20, + "invalid object handle" ) + FT_ERRORDEF_( Invalid_Library_Handle, 0x21, + "invalid library handle" ) + FT_ERRORDEF_( Invalid_Driver_Handle, 0x22, + "invalid module handle" ) + FT_ERRORDEF_( Invalid_Face_Handle, 0x23, + "invalid face handle" ) + FT_ERRORDEF_( Invalid_Size_Handle, 0x24, + "invalid size handle" ) + FT_ERRORDEF_( Invalid_Slot_Handle, 0x25, + "invalid glyph slot handle" ) + FT_ERRORDEF_( Invalid_CharMap_Handle, 0x26, + "invalid charmap handle" ) + FT_ERRORDEF_( Invalid_Cache_Handle, 0x27, + "invalid cache manager handle" ) + FT_ERRORDEF_( Invalid_Stream_Handle, 0x28, + "invalid stream handle" ) + + /* driver errors */ + + FT_ERRORDEF_( Too_Many_Drivers, 0x30, + "too many modules" ) + FT_ERRORDEF_( Too_Many_Extensions, 0x31, + "too many extensions" ) + + /* memory errors */ + + FT_ERRORDEF_( Out_Of_Memory, 0x40, + "out of memory" ) + FT_ERRORDEF_( Unlisted_Object, 0x41, + "unlisted object" ) + + /* stream errors */ + + FT_ERRORDEF_( Cannot_Open_Stream, 0x51, + "cannot open stream" ) + FT_ERRORDEF_( Invalid_Stream_Seek, 0x52, + "invalid stream seek" ) + FT_ERRORDEF_( Invalid_Stream_Skip, 0x53, + "invalid stream skip" ) + FT_ERRORDEF_( Invalid_Stream_Read, 0x54, + "invalid stream read" ) + FT_ERRORDEF_( Invalid_Stream_Operation, 0x55, + "invalid stream operation" ) + FT_ERRORDEF_( Invalid_Frame_Operation, 0x56, + "invalid frame operation" ) + FT_ERRORDEF_( Nested_Frame_Access, 0x57, + "nested frame access" ) + FT_ERRORDEF_( Invalid_Frame_Read, 0x58, + "invalid frame read" ) + + /* raster errors */ + + FT_ERRORDEF_( Raster_Uninitialized, 0x60, + "raster uninitialized" ) + FT_ERRORDEF_( Raster_Corrupted, 0x61, + "raster corrupted" ) + FT_ERRORDEF_( Raster_Overflow, 0x62, + "raster overflow" ) + FT_ERRORDEF_( Raster_Negative_Height, 0x63, + "negative height while rastering" ) + + /* cache errors */ + + FT_ERRORDEF_( Too_Many_Caches, 0x70, + "too many registered caches" ) + + /* TrueType and SFNT errors */ + + FT_ERRORDEF_( Invalid_Opcode, 0x80, + "invalid opcode" ) + FT_ERRORDEF_( Too_Few_Arguments, 0x81, + "too few arguments" ) + FT_ERRORDEF_( Stack_Overflow, 0x82, + "stack overflow" ) + FT_ERRORDEF_( Code_Overflow, 0x83, + "code overflow" ) + FT_ERRORDEF_( Bad_Argument, 0x84, + "bad argument" ) + FT_ERRORDEF_( Divide_By_Zero, 0x85, + "division by zero" ) + FT_ERRORDEF_( Invalid_Reference, 0x86, + "invalid reference" ) + FT_ERRORDEF_( Debug_OpCode, 0x87, + "found debug opcode" ) + FT_ERRORDEF_( ENDF_In_Exec_Stream, 0x88, + "found ENDF opcode in execution stream" ) + FT_ERRORDEF_( Nested_DEFS, 0x89, + "nested DEFS" ) + FT_ERRORDEF_( Invalid_CodeRange, 0x8A, + "invalid code range" ) + FT_ERRORDEF_( Execution_Too_Long, 0x8B, + "execution context too long" ) + FT_ERRORDEF_( Too_Many_Function_Defs, 0x8C, + "too many function definitions" ) + FT_ERRORDEF_( Too_Many_Instruction_Defs, 0x8D, + "too many instruction definitions" ) + FT_ERRORDEF_( Table_Missing, 0x8E, + "SFNT font table missing" ) + FT_ERRORDEF_( Horiz_Header_Missing, 0x8F, + "horizontal header (hhea) table missing" ) + FT_ERRORDEF_( Locations_Missing, 0x90, + "locations (loca) table missing" ) + FT_ERRORDEF_( Name_Table_Missing, 0x91, + "name table missing" ) + FT_ERRORDEF_( CMap_Table_Missing, 0x92, + "character map (cmap) table missing" ) + FT_ERRORDEF_( Hmtx_Table_Missing, 0x93, + "horizontal metrics (hmtx) table missing" ) + FT_ERRORDEF_( Post_Table_Missing, 0x94, + "PostScript (post) table missing" ) + FT_ERRORDEF_( Invalid_Horiz_Metrics, 0x95, + "invalid horizontal metrics" ) + FT_ERRORDEF_( Invalid_CharMap_Format, 0x96, + "invalid character map (cmap) format" ) + FT_ERRORDEF_( Invalid_PPem, 0x97, + "invalid ppem value" ) + FT_ERRORDEF_( Invalid_Vert_Metrics, 0x98, + "invalid vertical metrics" ) + FT_ERRORDEF_( Could_Not_Find_Context, 0x99, + "could not find context" ) + FT_ERRORDEF_( Invalid_Post_Table_Format, 0x9A, + "invalid PostScript (post) table format" ) + FT_ERRORDEF_( Invalid_Post_Table, 0x9B, + "invalid PostScript (post) table" ) + FT_ERRORDEF_( DEF_In_Glyf_Bytecode, 0x9C, + "found FDEF or IDEF opcode in glyf bytecode" ) + FT_ERRORDEF_( Missing_Bitmap, 0x9D, + "missing bitmap in strike" ) + FT_ERRORDEF_( Missing_SVG_Hooks, 0x9E, + "SVG hooks have not been set" ) + + /* CFF, CID, and Type 1 errors */ + + FT_ERRORDEF_( Syntax_Error, 0xA0, + "opcode syntax error" ) + FT_ERRORDEF_( Stack_Underflow, 0xA1, + "argument stack underflow" ) + FT_ERRORDEF_( Ignore, 0xA2, + "ignore" ) + FT_ERRORDEF_( No_Unicode_Glyph_Name, 0xA3, + "no Unicode glyph name found" ) + FT_ERRORDEF_( Glyph_Too_Big, 0xA4, + "glyph too big for hinting" ) + + /* BDF errors */ + + FT_ERRORDEF_( Missing_Startfont_Field, 0xB0, + "`STARTFONT' field missing" ) + FT_ERRORDEF_( Missing_Font_Field, 0xB1, + "`FONT' field missing" ) + FT_ERRORDEF_( Missing_Size_Field, 0xB2, + "`SIZE' field missing" ) + FT_ERRORDEF_( Missing_Fontboundingbox_Field, 0xB3, + "`FONTBOUNDINGBOX' field missing" ) + FT_ERRORDEF_( Missing_Chars_Field, 0xB4, + "`CHARS' field missing" ) + FT_ERRORDEF_( Missing_Startchar_Field, 0xB5, + "`STARTCHAR' field missing" ) + FT_ERRORDEF_( Missing_Encoding_Field, 0xB6, + "`ENCODING' field missing" ) + FT_ERRORDEF_( Missing_Bbx_Field, 0xB7, + "`BBX' field missing" ) + FT_ERRORDEF_( Bbx_Too_Big, 0xB8, + "`BBX' too big" ) + FT_ERRORDEF_( Corrupted_Font_Header, 0xB9, + "Font header corrupted or missing fields" ) + FT_ERRORDEF_( Corrupted_Font_Glyphs, 0xBA, + "Font glyphs corrupted or missing fields" ) + + /* */ + + +/* END */ diff --git a/dependencies/linux64/include/freetype2/freetype/fterrors.h b/dependencies/linux64/include/freetype2/freetype/fterrors.h new file mode 100644 index 0000000..27c0ece --- /dev/null +++ b/dependencies/linux64/include/freetype2/freetype/fterrors.h @@ -0,0 +1,296 @@ +/**************************************************************************** + * + * fterrors.h + * + * FreeType error code handling (specification). + * + * Copyright (C) 1996-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + + /************************************************************************** + * + * @section: + * error_enumerations + * + * @title: + * Error Enumerations + * + * @abstract: + * How to handle errors and error strings. + * + * @description: + * The header file `fterrors.h` (which is automatically included by + * `freetype.h`) defines the handling of FreeType's enumeration + * constants. It can also be used to generate error message strings + * with a small macro trick explained below. + * + * **Error Formats** + * + * The configuration macro `FT_CONFIG_OPTION_USE_MODULE_ERRORS` can be + * defined in `ftoption.h` in order to make the higher byte indicate the + * module where the error has happened (this is not compatible with + * standard builds of FreeType~2, however). See the file `ftmoderr.h` + * for more details. + * + * **Error Message Strings** + * + * Error definitions are set up with special macros that allow client + * applications to build a table of error message strings. The strings + * are not included in a normal build of FreeType~2 to save space (most + * client applications do not use them). + * + * To do so, you have to define the following macros before including + * this file. + * + * ``` + * FT_ERROR_START_LIST + * ``` + * + * This macro is called before anything else to define the start of the + * error list. It is followed by several `FT_ERROR_DEF` calls. + * + * ``` + * FT_ERROR_DEF( e, v, s ) + * ``` + * + * This macro is called to define one single error. 'e' is the error + * code identifier (e.g., `Invalid_Argument`), 'v' is the error's + * numerical value, and 's' is the corresponding error string. + * + * ``` + * FT_ERROR_END_LIST + * ``` + * + * This macro ends the list. + * + * Additionally, you have to undefine `FTERRORS_H_` before #including + * this file. + * + * Here is a simple example. + * + * ``` + * #undef FTERRORS_H_ + * #define FT_ERRORDEF( e, v, s ) { e, s }, + * #define FT_ERROR_START_LIST { + * #define FT_ERROR_END_LIST { 0, NULL } }; + * + * const struct + * { + * int err_code; + * const char* err_msg; + * } ft_errors[] = + * + * #include + * ``` + * + * An alternative to using an array is a switch statement. + * + * ``` + * #undef FTERRORS_H_ + * #define FT_ERROR_START_LIST switch ( error_code ) { + * #define FT_ERRORDEF( e, v, s ) case v: return s; + * #define FT_ERROR_END_LIST } + * ``` + * + * If you use `FT_CONFIG_OPTION_USE_MODULE_ERRORS`, `error_code` should + * be replaced with `FT_ERROR_BASE(error_code)` in the last example. + */ + + /* */ + + /* In previous FreeType versions we used `__FTERRORS_H__`. However, */ + /* using two successive underscores in a non-system symbol name */ + /* violates the C (and C++) standard, so it was changed to the */ + /* current form. In spite of this, we have to make */ + /* */ + /* ``` */ + /* #undefine __FTERRORS_H__ */ + /* ``` */ + /* */ + /* work for backward compatibility. */ + /* */ +#if !( defined( FTERRORS_H_ ) && defined ( __FTERRORS_H__ ) ) +#define FTERRORS_H_ +#define __FTERRORS_H__ + + + /* include module base error codes */ +#include + + + /*******************************************************************/ + /*******************************************************************/ + /***** *****/ + /***** SETUP MACROS *****/ + /***** *****/ + /*******************************************************************/ + /*******************************************************************/ + + +#undef FT_NEED_EXTERN_C + + + /* FT_ERR_PREFIX is used as a prefix for error identifiers. */ + /* By default, we use `FT_Err_`. */ + /* */ +#ifndef FT_ERR_PREFIX +#define FT_ERR_PREFIX FT_Err_ +#endif + + + /* FT_ERR_BASE is used as the base for module-specific errors. */ + /* */ +#ifdef FT_CONFIG_OPTION_USE_MODULE_ERRORS + +#ifndef FT_ERR_BASE +#define FT_ERR_BASE FT_Mod_Err_Base +#endif + +#else + +#undef FT_ERR_BASE +#define FT_ERR_BASE 0 + +#endif /* FT_CONFIG_OPTION_USE_MODULE_ERRORS */ + + + /* If FT_ERRORDEF is not defined, we need to define a simple */ + /* enumeration type. */ + /* */ +#ifndef FT_ERRORDEF + +#define FT_INCLUDE_ERR_PROTOS + +#define FT_ERRORDEF( e, v, s ) e = v, +#define FT_ERROR_START_LIST enum { +#define FT_ERROR_END_LIST FT_ERR_CAT( FT_ERR_PREFIX, Max ) }; + +#ifdef __cplusplus +#define FT_NEED_EXTERN_C + extern "C" { +#endif + +#endif /* !FT_ERRORDEF */ + + + /* this macro is used to define an error */ +#define FT_ERRORDEF_( e, v, s ) \ + FT_ERRORDEF( FT_ERR_CAT( FT_ERR_PREFIX, e ), v + FT_ERR_BASE, s ) + + /* this is only used for _Err_Ok, which must be 0! */ +#define FT_NOERRORDEF_( e, v, s ) \ + FT_ERRORDEF( FT_ERR_CAT( FT_ERR_PREFIX, e ), v, s ) + + +#ifdef FT_ERROR_START_LIST + FT_ERROR_START_LIST +#endif + + + /* now include the error codes */ +#include + + +#ifdef FT_ERROR_END_LIST + FT_ERROR_END_LIST +#endif + + + /*******************************************************************/ + /*******************************************************************/ + /***** *****/ + /***** SIMPLE CLEANUP *****/ + /***** *****/ + /*******************************************************************/ + /*******************************************************************/ + +#ifdef FT_NEED_EXTERN_C + } +#endif + +#undef FT_ERROR_START_LIST +#undef FT_ERROR_END_LIST + +#undef FT_ERRORDEF +#undef FT_ERRORDEF_ +#undef FT_NOERRORDEF_ + +#undef FT_NEED_EXTERN_C +#undef FT_ERR_BASE + + /* FT_ERR_PREFIX is needed internally */ +#ifndef FT2_BUILD_LIBRARY +#undef FT_ERR_PREFIX +#endif + + /* FT_INCLUDE_ERR_PROTOS: Control whether function prototypes should be */ + /* included with */ + /* */ + /* #include */ + /* */ + /* This is only true where `FT_ERRORDEF` is */ + /* undefined. */ + /* */ + /* FT_ERR_PROTOS_DEFINED: Actual multiple-inclusion protection of */ + /* `fterrors.h`. */ +#ifdef FT_INCLUDE_ERR_PROTOS +#undef FT_INCLUDE_ERR_PROTOS + +#ifndef FT_ERR_PROTOS_DEFINED +#define FT_ERR_PROTOS_DEFINED + + +FT_BEGIN_HEADER + + /************************************************************************** + * + * @function: + * FT_Error_String + * + * @description: + * Retrieve the description of a valid FreeType error code. + * + * @input: + * error_code :: + * A valid FreeType error code. + * + * @return: + * A C~string or `NULL`, if any error occurred. + * + * @note: + * FreeType has to be compiled with `FT_CONFIG_OPTION_ERROR_STRINGS` or + * `FT_DEBUG_LEVEL_ERROR` to get meaningful descriptions. + * 'error_string' will be `NULL` otherwise. + * + * Module identification will be ignored: + * + * ```c + * strcmp( FT_Error_String( FT_Err_Unknown_File_Format ), + * FT_Error_String( BDF_Err_Unknown_File_Format ) ) == 0; + * ``` + */ + FT_EXPORT( const char* ) + FT_Error_String( FT_Error error_code ); + + /* */ + +FT_END_HEADER + + +#endif /* FT_ERR_PROTOS_DEFINED */ + +#endif /* FT_INCLUDE_ERR_PROTOS */ + +#endif /* !(FTERRORS_H_ && __FTERRORS_H__) */ + + +/* END */ diff --git a/dependencies/linux64/include/freetype2/freetype/ftfntfmt.h b/dependencies/linux64/include/freetype2/freetype/ftfntfmt.h new file mode 100644 index 0000000..7c8b087 --- /dev/null +++ b/dependencies/linux64/include/freetype2/freetype/ftfntfmt.h @@ -0,0 +1,93 @@ +/**************************************************************************** + * + * ftfntfmt.h + * + * Support functions for font formats. + * + * Copyright (C) 2002-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + +#ifndef FTFNTFMT_H_ +#define FTFNTFMT_H_ + +#include + +#ifdef FREETYPE_H +#error "freetype.h of FreeType 1 has been loaded!" +#error "Please fix the directory search order for header files" +#error "so that freetype.h of FreeType 2 is found first." +#endif + + +FT_BEGIN_HEADER + + + /************************************************************************** + * + * @section: + * font_formats + * + * @title: + * Font Formats + * + * @abstract: + * Getting the font format. + * + * @description: + * The single function in this section can be used to get the font format. + * Note that this information is not needed normally; however, there are + * special cases (like in PDF devices) where it is important to + * differentiate, in spite of FreeType's uniform API. + * + */ + + + /************************************************************************** + * + * @function: + * FT_Get_Font_Format + * + * @description: + * Return a string describing the format of a given face. Possible values + * are 'TrueType', 'Type~1', 'BDF', 'PCF', 'Type~42', 'CID~Type~1', 'CFF', + * 'PFR', and 'Windows~FNT'. + * + * The return value is suitable to be used as an X11 FONT_PROPERTY. + * + * @input: + * face :: + * Input face handle. + * + * @return: + * Font format string. `NULL` in case of error. + * + * @note: + * A deprecated name for the same function is `FT_Get_X11_Font_Format`. + */ + FT_EXPORT( const char* ) + FT_Get_Font_Format( FT_Face face ); + + + /* deprecated */ + FT_EXPORT( const char* ) + FT_Get_X11_Font_Format( FT_Face face ); + + + /* */ + + +FT_END_HEADER + +#endif /* FTFNTFMT_H_ */ + + +/* END */ diff --git a/dependencies/linux64/include/freetype2/freetype/ftgasp.h b/dependencies/linux64/include/freetype2/freetype/ftgasp.h new file mode 100644 index 0000000..30e5a9b --- /dev/null +++ b/dependencies/linux64/include/freetype2/freetype/ftgasp.h @@ -0,0 +1,143 @@ +/**************************************************************************** + * + * ftgasp.h + * + * Access of TrueType's 'gasp' table (specification). + * + * Copyright (C) 2007-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + +#ifndef FTGASP_H_ +#define FTGASP_H_ + +#include + +#ifdef FREETYPE_H +#error "freetype.h of FreeType 1 has been loaded!" +#error "Please fix the directory search order for header files" +#error "so that freetype.h of FreeType 2 is found first." +#endif + + +FT_BEGIN_HEADER + + + /************************************************************************** + * + * @section: + * gasp_table + * + * @title: + * Gasp Table + * + * @abstract: + * Retrieving TrueType 'gasp' table entries. + * + * @description: + * The function @FT_Get_Gasp can be used to query a TrueType or OpenType + * font for specific entries in its 'gasp' table, if any. This is mainly + * useful when implementing native TrueType hinting with the bytecode + * interpreter to duplicate the Windows text rendering results. + */ + + /************************************************************************** + * + * @enum: + * FT_GASP_XXX + * + * @description: + * A list of values and/or bit-flags returned by the @FT_Get_Gasp + * function. + * + * @values: + * FT_GASP_NO_TABLE :: + * This special value means that there is no GASP table in this face. + * It is up to the client to decide what to do. + * + * FT_GASP_DO_GRIDFIT :: + * Grid-fitting and hinting should be performed at the specified ppem. + * This **really** means TrueType bytecode interpretation. If this bit + * is not set, no hinting gets applied. + * + * FT_GASP_DO_GRAY :: + * Anti-aliased rendering should be performed at the specified ppem. + * If not set, do monochrome rendering. + * + * FT_GASP_SYMMETRIC_SMOOTHING :: + * If set, smoothing along multiple axes must be used with ClearType. + * + * FT_GASP_SYMMETRIC_GRIDFIT :: + * Grid-fitting must be used with ClearType's symmetric smoothing. + * + * @note: + * The bit-flags `FT_GASP_DO_GRIDFIT` and `FT_GASP_DO_GRAY` are to be + * used for standard font rasterization only. Independently of that, + * `FT_GASP_SYMMETRIC_SMOOTHING` and `FT_GASP_SYMMETRIC_GRIDFIT` are to + * be used if ClearType is enabled (and `FT_GASP_DO_GRIDFIT` and + * `FT_GASP_DO_GRAY` are consequently ignored). + * + * 'ClearType' is Microsoft's implementation of LCD rendering, partly + * protected by patents. + * + * @since: + * 2.3.0 + */ +#define FT_GASP_NO_TABLE -1 +#define FT_GASP_DO_GRIDFIT 0x01 +#define FT_GASP_DO_GRAY 0x02 +#define FT_GASP_SYMMETRIC_GRIDFIT 0x04 +#define FT_GASP_SYMMETRIC_SMOOTHING 0x08 + + + /************************************************************************** + * + * @function: + * FT_Get_Gasp + * + * @description: + * For a TrueType or OpenType font file, return the rasterizer behaviour + * flags from the font's 'gasp' table corresponding to a given character + * pixel size. + * + * @input: + * face :: + * The source face handle. + * + * ppem :: + * The vertical character pixel size. + * + * @return: + * Bit flags (see @FT_GASP_XXX), or @FT_GASP_NO_TABLE if there is no + * 'gasp' table in the face. + * + * @note: + * If you want to use the MM functionality of OpenType variation fonts + * (i.e., using @FT_Set_Var_Design_Coordinates and friends), call this + * function **after** setting an instance since the return values can + * change. + * + * @since: + * 2.3.0 + */ + FT_EXPORT( FT_Int ) + FT_Get_Gasp( FT_Face face, + FT_UInt ppem ); + + /* */ + + +FT_END_HEADER + +#endif /* FTGASP_H_ */ + + +/* END */ diff --git a/dependencies/linux64/include/freetype2/freetype/ftglyph.h b/dependencies/linux64/include/freetype2/freetype/ftglyph.h new file mode 100644 index 0000000..dc1eb88 --- /dev/null +++ b/dependencies/linux64/include/freetype2/freetype/ftglyph.h @@ -0,0 +1,750 @@ +/**************************************************************************** + * + * ftglyph.h + * + * FreeType convenience functions to handle glyphs (specification). + * + * Copyright (C) 1996-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + + /************************************************************************** + * + * This file contains the definition of several convenience functions that + * can be used by client applications to easily retrieve glyph bitmaps and + * outlines from a given face. + * + * These functions should be optional if you are writing a font server or + * text layout engine on top of FreeType. However, they are pretty handy + * for many other simple uses of the library. + * + */ + + +#ifndef FTGLYPH_H_ +#define FTGLYPH_H_ + + +#include + +#ifdef FREETYPE_H +#error "freetype.h of FreeType 1 has been loaded!" +#error "Please fix the directory search order for header files" +#error "so that freetype.h of FreeType 2 is found first." +#endif + + +FT_BEGIN_HEADER + + + /************************************************************************** + * + * @section: + * glyph_management + * + * @title: + * Glyph Management + * + * @abstract: + * Generic interface to manage individual glyph data. + * + * @description: + * This section contains definitions used to manage glyph data through + * generic @FT_Glyph objects. Each of them can contain a bitmap, + * a vector outline, or even images in other formats. These objects are + * detached from @FT_Face, contrary to @FT_GlyphSlot. + * + */ + + + /* forward declaration to a private type */ + typedef struct FT_Glyph_Class_ FT_Glyph_Class; + + + /************************************************************************** + * + * @type: + * FT_Glyph + * + * @description: + * Handle to an object used to model generic glyph images. It is a + * pointer to the @FT_GlyphRec structure and can contain a glyph bitmap + * or pointer. + * + * @note: + * Glyph objects are not owned by the library. You must thus release + * them manually (through @FT_Done_Glyph) _before_ calling + * @FT_Done_FreeType. + */ + typedef struct FT_GlyphRec_* FT_Glyph; + + + /************************************************************************** + * + * @struct: + * FT_GlyphRec + * + * @description: + * The root glyph structure contains a given glyph image plus its advance + * width in 16.16 fixed-point format. + * + * @fields: + * library :: + * A handle to the FreeType library object. + * + * clazz :: + * A pointer to the glyph's class. Private. + * + * format :: + * The format of the glyph's image. + * + * advance :: + * A 16.16 vector that gives the glyph's advance width. + */ + typedef struct FT_GlyphRec_ + { + FT_Library library; + const FT_Glyph_Class* clazz; + FT_Glyph_Format format; + FT_Vector advance; + + } FT_GlyphRec; + + + /************************************************************************** + * + * @type: + * FT_BitmapGlyph + * + * @description: + * A handle to an object used to model a bitmap glyph image. This is a + * 'sub-class' of @FT_Glyph, and a pointer to @FT_BitmapGlyphRec. + */ + typedef struct FT_BitmapGlyphRec_* FT_BitmapGlyph; + + + /************************************************************************** + * + * @struct: + * FT_BitmapGlyphRec + * + * @description: + * A structure used for bitmap glyph images. This really is a + * 'sub-class' of @FT_GlyphRec. + * + * @fields: + * root :: + * The root fields of @FT_Glyph. + * + * left :: + * The left-side bearing, i.e., the horizontal distance from the + * current pen position to the left border of the glyph bitmap. + * + * top :: + * The top-side bearing, i.e., the vertical distance from the current + * pen position to the top border of the glyph bitmap. This distance + * is positive for upwards~y! + * + * bitmap :: + * A descriptor for the bitmap. + * + * @note: + * You can typecast an @FT_Glyph to @FT_BitmapGlyph if you have + * `glyph->format == FT_GLYPH_FORMAT_BITMAP`. This lets you access the + * bitmap's contents easily. + * + * The corresponding pixel buffer is always owned by @FT_BitmapGlyph and + * is thus created and destroyed with it. + */ + typedef struct FT_BitmapGlyphRec_ + { + FT_GlyphRec root; + FT_Int left; + FT_Int top; + FT_Bitmap bitmap; + + } FT_BitmapGlyphRec; + + + /************************************************************************** + * + * @type: + * FT_OutlineGlyph + * + * @description: + * A handle to an object used to model an outline glyph image. This is a + * 'sub-class' of @FT_Glyph, and a pointer to @FT_OutlineGlyphRec. + */ + typedef struct FT_OutlineGlyphRec_* FT_OutlineGlyph; + + + /************************************************************************** + * + * @struct: + * FT_OutlineGlyphRec + * + * @description: + * A structure used for outline (vectorial) glyph images. This really is + * a 'sub-class' of @FT_GlyphRec. + * + * @fields: + * root :: + * The root @FT_Glyph fields. + * + * outline :: + * A descriptor for the outline. + * + * @note: + * You can typecast an @FT_Glyph to @FT_OutlineGlyph if you have + * `glyph->format == FT_GLYPH_FORMAT_OUTLINE`. This lets you access the + * outline's content easily. + * + * As the outline is extracted from a glyph slot, its coordinates are + * expressed normally in 26.6 pixels, unless the flag @FT_LOAD_NO_SCALE + * was used in @FT_Load_Glyph or @FT_Load_Char. + * + * The outline's tables are always owned by the object and are destroyed + * with it. + */ + typedef struct FT_OutlineGlyphRec_ + { + FT_GlyphRec root; + FT_Outline outline; + + } FT_OutlineGlyphRec; + + + /************************************************************************** + * + * @type: + * FT_SvgGlyph + * + * @description: + * A handle to an object used to model an SVG glyph. This is a + * 'sub-class' of @FT_Glyph, and a pointer to @FT_SvgGlyphRec. + * + * @since: + * 2.12 + */ + typedef struct FT_SvgGlyphRec_* FT_SvgGlyph; + + + /************************************************************************** + * + * @struct: + * FT_SvgGlyphRec + * + * @description: + * A structure used for OT-SVG glyphs. This is a 'sub-class' of + * @FT_GlyphRec. + * + * @fields: + * root :: + * The root @FT_GlyphRec fields. + * + * svg_document :: + * A pointer to the SVG document. + * + * svg_document_length :: + * The length of `svg_document`. + * + * glyph_index :: + * The index of the glyph to be rendered. + * + * metrics :: + * A metrics object storing the size information. + * + * units_per_EM :: + * The size of the EM square. + * + * start_glyph_id :: + * The first glyph ID in the glyph range covered by this document. + * + * end_glyph_id :: + * The last glyph ID in the glyph range covered by this document. + * + * transform :: + * A 2x2 transformation matrix to apply to the glyph while rendering + * it. + * + * delta :: + * Translation to apply to the glyph while rendering. + * + * @note: + * The Glyph Management API requires @FT_Glyph or its 'sub-class' to have + * all the information needed to completely define the glyph's rendering. + * Outline-based glyphs can directly apply transformations to the outline + * but this is not possible for an SVG document that hasn't been parsed. + * Therefore, the transformation is stored along with the document. In + * the absence of a 'ViewBox' or 'Width'/'Height' attribute, the size of + * the ViewPort should be assumed to be 'units_per_EM'. + */ + typedef struct FT_SvgGlyphRec_ + { + FT_GlyphRec root; + + FT_Byte* svg_document; + FT_ULong svg_document_length; + + FT_UInt glyph_index; + + FT_Size_Metrics metrics; + FT_UShort units_per_EM; + + FT_UShort start_glyph_id; + FT_UShort end_glyph_id; + + FT_Matrix transform; + FT_Vector delta; + + } FT_SvgGlyphRec; + + + /************************************************************************** + * + * @function: + * FT_New_Glyph + * + * @description: + * A function used to create a new empty glyph image. Note that the + * created @FT_Glyph object must be released with @FT_Done_Glyph. + * + * @input: + * library :: + * A handle to the FreeType library object. + * + * format :: + * The format of the glyph's image. + * + * @output: + * aglyph :: + * A handle to the glyph object. + * + * @return: + * FreeType error code. 0~means success. + * + * @since: + * 2.10 + */ + FT_EXPORT( FT_Error ) + FT_New_Glyph( FT_Library library, + FT_Glyph_Format format, + FT_Glyph *aglyph ); + + + /************************************************************************** + * + * @function: + * FT_Get_Glyph + * + * @description: + * A function used to extract a glyph image from a slot. Note that the + * created @FT_Glyph object must be released with @FT_Done_Glyph. + * + * @input: + * slot :: + * A handle to the source glyph slot. + * + * @output: + * aglyph :: + * A handle to the glyph object. `NULL` in case of error. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * Because `*aglyph->advance.x` and `*aglyph->advance.y` are 16.16 + * fixed-point numbers, `slot->advance.x` and `slot->advance.y` (which + * are in 26.6 fixed-point format) must be in the range ]-32768;32768[. + */ + FT_EXPORT( FT_Error ) + FT_Get_Glyph( FT_GlyphSlot slot, + FT_Glyph *aglyph ); + + + /************************************************************************** + * + * @function: + * FT_Glyph_Copy + * + * @description: + * A function used to copy a glyph image. Note that the created + * @FT_Glyph object must be released with @FT_Done_Glyph. + * + * @input: + * source :: + * A handle to the source glyph object. + * + * @output: + * target :: + * A handle to the target glyph object. `NULL` in case of error. + * + * @return: + * FreeType error code. 0~means success. + */ + FT_EXPORT( FT_Error ) + FT_Glyph_Copy( FT_Glyph source, + FT_Glyph *target ); + + + /************************************************************************** + * + * @function: + * FT_Glyph_Transform + * + * @description: + * Transform a glyph image if its format is scalable. + * + * @inout: + * glyph :: + * A handle to the target glyph object. + * + * @input: + * matrix :: + * A pointer to a 2x2 matrix to apply. + * + * delta :: + * A pointer to a 2d vector to apply. Coordinates are expressed in + * 1/64 of a pixel. + * + * @return: + * FreeType error code (if not 0, the glyph format is not scalable). + * + * @note: + * The 2x2 transformation matrix is also applied to the glyph's advance + * vector. + */ + FT_EXPORT( FT_Error ) + FT_Glyph_Transform( FT_Glyph glyph, + const FT_Matrix* matrix, + const FT_Vector* delta ); + + + /************************************************************************** + * + * @enum: + * FT_Glyph_BBox_Mode + * + * @description: + * The mode how the values of @FT_Glyph_Get_CBox are returned. + * + * @values: + * FT_GLYPH_BBOX_UNSCALED :: + * Return unscaled font units. + * + * FT_GLYPH_BBOX_SUBPIXELS :: + * Return unfitted 26.6 coordinates. + * + * FT_GLYPH_BBOX_GRIDFIT :: + * Return grid-fitted 26.6 coordinates. + * + * FT_GLYPH_BBOX_TRUNCATE :: + * Return coordinates in integer pixels. + * + * FT_GLYPH_BBOX_PIXELS :: + * Return grid-fitted pixel coordinates. + */ + typedef enum FT_Glyph_BBox_Mode_ + { + FT_GLYPH_BBOX_UNSCALED = 0, + FT_GLYPH_BBOX_SUBPIXELS = 0, + FT_GLYPH_BBOX_GRIDFIT = 1, + FT_GLYPH_BBOX_TRUNCATE = 2, + FT_GLYPH_BBOX_PIXELS = 3 + + } FT_Glyph_BBox_Mode; + + + /* these constants are deprecated; use the corresponding */ + /* `FT_Glyph_BBox_Mode` values instead */ +#define ft_glyph_bbox_unscaled FT_GLYPH_BBOX_UNSCALED +#define ft_glyph_bbox_subpixels FT_GLYPH_BBOX_SUBPIXELS +#define ft_glyph_bbox_gridfit FT_GLYPH_BBOX_GRIDFIT +#define ft_glyph_bbox_truncate FT_GLYPH_BBOX_TRUNCATE +#define ft_glyph_bbox_pixels FT_GLYPH_BBOX_PIXELS + + + /************************************************************************** + * + * @function: + * FT_Glyph_Get_CBox + * + * @description: + * Return a glyph's 'control box'. The control box encloses all the + * outline's points, including Bezier control points. Though it + * coincides with the exact bounding box for most glyphs, it can be + * slightly larger in some situations (like when rotating an outline that + * contains Bezier outside arcs). + * + * Computing the control box is very fast, while getting the bounding box + * can take much more time as it needs to walk over all segments and arcs + * in the outline. To get the latter, you can use the 'ftbbox' + * component, which is dedicated to this single task. + * + * @input: + * glyph :: + * A handle to the source glyph object. + * + * mode :: + * The mode that indicates how to interpret the returned bounding box + * values. + * + * @output: + * acbox :: + * The glyph coordinate bounding box. Coordinates are expressed in + * 1/64 of pixels if it is grid-fitted. + * + * @note: + * Coordinates are relative to the glyph origin, using the y~upwards + * convention. + * + * If the glyph has been loaded with @FT_LOAD_NO_SCALE, `bbox_mode` must + * be set to @FT_GLYPH_BBOX_UNSCALED to get unscaled font units in 26.6 + * pixel format. The value @FT_GLYPH_BBOX_SUBPIXELS is another name for + * this constant. + * + * If the font is tricky and the glyph has been loaded with + * @FT_LOAD_NO_SCALE, the resulting CBox is meaningless. To get + * reasonable values for the CBox it is necessary to load the glyph at a + * large ppem value (so that the hinting instructions can properly shift + * and scale the subglyphs), then extracting the CBox, which can be + * eventually converted back to font units. + * + * Note that the maximum coordinates are exclusive, which means that one + * can compute the width and height of the glyph image (be it in integer + * or 26.6 pixels) as: + * + * ``` + * width = bbox.xMax - bbox.xMin; + * height = bbox.yMax - bbox.yMin; + * ``` + * + * Note also that for 26.6 coordinates, if `bbox_mode` is set to + * @FT_GLYPH_BBOX_GRIDFIT, the coordinates will also be grid-fitted, + * which corresponds to: + * + * ``` + * bbox.xMin = FLOOR(bbox.xMin); + * bbox.yMin = FLOOR(bbox.yMin); + * bbox.xMax = CEILING(bbox.xMax); + * bbox.yMax = CEILING(bbox.yMax); + * ``` + * + * To get the bbox in pixel coordinates, set `bbox_mode` to + * @FT_GLYPH_BBOX_TRUNCATE. + * + * To get the bbox in grid-fitted pixel coordinates, set `bbox_mode` to + * @FT_GLYPH_BBOX_PIXELS. + */ + FT_EXPORT( void ) + FT_Glyph_Get_CBox( FT_Glyph glyph, + FT_UInt bbox_mode, + FT_BBox *acbox ); + + + /************************************************************************** + * + * @function: + * FT_Glyph_To_Bitmap + * + * @description: + * Convert a given glyph object to a bitmap glyph object. + * + * @inout: + * the_glyph :: + * A pointer to a handle to the target glyph. + * + * @input: + * render_mode :: + * An enumeration that describes how the data is rendered. + * + * origin :: + * A pointer to a vector used to translate the glyph image before + * rendering. Can be~0 (if no translation). The origin is expressed + * in 26.6 pixels. + * + * destroy :: + * A boolean that indicates that the original glyph image should be + * destroyed by this function. It is never destroyed in case of error. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * This function does nothing if the glyph format isn't scalable. + * + * The glyph image is translated with the `origin` vector before + * rendering. + * + * The first parameter is a pointer to an @FT_Glyph handle that will be + * _replaced_ by this function (with newly allocated data). Typically, + * you would do something like the following (omitting error handling). + * + * ``` + * FT_Glyph glyph; + * FT_BitmapGlyph glyph_bitmap; + * + * + * // load glyph + * error = FT_Load_Char( face, glyph_index, FT_LOAD_DEFAULT ); + * + * // extract glyph image + * error = FT_Get_Glyph( face->glyph, &glyph ); + * + * // convert to a bitmap (default render mode + destroying old) + * if ( glyph->format != FT_GLYPH_FORMAT_BITMAP ) + * { + * error = FT_Glyph_To_Bitmap( &glyph, FT_RENDER_MODE_NORMAL, + * 0, 1 ); + * if ( error ) // `glyph' unchanged + * ... + * } + * + * // access bitmap content by typecasting + * glyph_bitmap = (FT_BitmapGlyph)glyph; + * + * // do funny stuff with it, like blitting/drawing + * ... + * + * // discard glyph image (bitmap or not) + * FT_Done_Glyph( glyph ); + * ``` + * + * Here is another example, again without error handling. + * + * ``` + * FT_Glyph glyphs[MAX_GLYPHS] + * + * + * ... + * + * for ( idx = 0; i < MAX_GLYPHS; i++ ) + * error = FT_Load_Glyph( face, idx, FT_LOAD_DEFAULT ) || + * FT_Get_Glyph ( face->glyph, &glyphs[idx] ); + * + * ... + * + * for ( idx = 0; i < MAX_GLYPHS; i++ ) + * { + * FT_Glyph bitmap = glyphs[idx]; + * + * + * ... + * + * // after this call, `bitmap' no longer points into + * // the `glyphs' array (and the old value isn't destroyed) + * FT_Glyph_To_Bitmap( &bitmap, FT_RENDER_MODE_MONO, 0, 0 ); + * + * ... + * + * FT_Done_Glyph( bitmap ); + * } + * + * ... + * + * for ( idx = 0; i < MAX_GLYPHS; i++ ) + * FT_Done_Glyph( glyphs[idx] ); + * ``` + */ + FT_EXPORT( FT_Error ) + FT_Glyph_To_Bitmap( FT_Glyph* the_glyph, + FT_Render_Mode render_mode, + const FT_Vector* origin, + FT_Bool destroy ); + + + /************************************************************************** + * + * @function: + * FT_Done_Glyph + * + * @description: + * Destroy a given glyph. + * + * @input: + * glyph :: + * A handle to the target glyph object. Can be `NULL`. + */ + FT_EXPORT( void ) + FT_Done_Glyph( FT_Glyph glyph ); + + /* */ + + + /* other helpful functions */ + + /************************************************************************** + * + * @section: + * computations + * + */ + + + /************************************************************************** + * + * @function: + * FT_Matrix_Multiply + * + * @description: + * Perform the matrix operation `b = a*b`. + * + * @input: + * a :: + * A pointer to matrix `a`. + * + * @inout: + * b :: + * A pointer to matrix `b`. + * + * @note: + * The result is undefined if either `a` or `b` is zero. + * + * Since the function uses wrap-around arithmetic, results become + * meaningless if the arguments are very large. + */ + FT_EXPORT( void ) + FT_Matrix_Multiply( const FT_Matrix* a, + FT_Matrix* b ); + + + /************************************************************************** + * + * @function: + * FT_Matrix_Invert + * + * @description: + * Invert a 2x2 matrix. Return an error if it can't be inverted. + * + * @inout: + * matrix :: + * A pointer to the target matrix. Remains untouched in case of error. + * + * @return: + * FreeType error code. 0~means success. + */ + FT_EXPORT( FT_Error ) + FT_Matrix_Invert( FT_Matrix* matrix ); + + /* */ + + +FT_END_HEADER + +#endif /* FTGLYPH_H_ */ + + +/* END */ + + +/* Local Variables: */ +/* coding: utf-8 */ +/* End: */ diff --git a/dependencies/linux64/include/freetype2/freetype/ftgxval.h b/dependencies/linux64/include/freetype2/freetype/ftgxval.h new file mode 100644 index 0000000..065cd53 --- /dev/null +++ b/dependencies/linux64/include/freetype2/freetype/ftgxval.h @@ -0,0 +1,354 @@ +/**************************************************************************** + * + * ftgxval.h + * + * FreeType API for validating TrueTypeGX/AAT tables (specification). + * + * Copyright (C) 2004-2024 by + * Masatake YAMATO, Redhat K.K, + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + +/**************************************************************************** + * + * gxvalid is derived from both gxlayout module and otvalid module. + * Development of gxlayout is supported by the Information-technology + * Promotion Agency(IPA), Japan. + * + */ + + +#ifndef FTGXVAL_H_ +#define FTGXVAL_H_ + +#include + +#ifdef FREETYPE_H +#error "freetype.h of FreeType 1 has been loaded!" +#error "Please fix the directory search order for header files" +#error "so that freetype.h of FreeType 2 is found first." +#endif + + +FT_BEGIN_HEADER + + + /************************************************************************** + * + * @section: + * gx_validation + * + * @title: + * TrueTypeGX/AAT Validation + * + * @abstract: + * An API to validate TrueTypeGX/AAT tables. + * + * @description: + * This section contains the declaration of functions to validate some + * TrueTypeGX tables (feat, mort, morx, bsln, just, kern, opbd, trak, + * prop, lcar). + * + * @order: + * FT_TrueTypeGX_Validate + * FT_TrueTypeGX_Free + * + * FT_ClassicKern_Validate + * FT_ClassicKern_Free + * + * FT_VALIDATE_GX_LENGTH + * FT_VALIDATE_GXXXX + * FT_VALIDATE_CKERNXXX + * + */ + + /************************************************************************** + * + * + * Warning: Use `FT_VALIDATE_XXX` to validate a table. + * Following definitions are for gxvalid developers. + * + * + */ + +#define FT_VALIDATE_feat_INDEX 0 +#define FT_VALIDATE_mort_INDEX 1 +#define FT_VALIDATE_morx_INDEX 2 +#define FT_VALIDATE_bsln_INDEX 3 +#define FT_VALIDATE_just_INDEX 4 +#define FT_VALIDATE_kern_INDEX 5 +#define FT_VALIDATE_opbd_INDEX 6 +#define FT_VALIDATE_trak_INDEX 7 +#define FT_VALIDATE_prop_INDEX 8 +#define FT_VALIDATE_lcar_INDEX 9 +#define FT_VALIDATE_GX_LAST_INDEX FT_VALIDATE_lcar_INDEX + + + /************************************************************************** + * + * @macro: + * FT_VALIDATE_GX_LENGTH + * + * @description: + * The number of tables checked in this module. Use it as a parameter + * for the `table-length` argument of function @FT_TrueTypeGX_Validate. + */ +#define FT_VALIDATE_GX_LENGTH ( FT_VALIDATE_GX_LAST_INDEX + 1 ) + + /* */ + + /* Up to 0x1000 is used by otvalid. + Ox2xxx is reserved for feature OT extension. */ +#define FT_VALIDATE_GX_START 0x4000 +#define FT_VALIDATE_GX_BITFIELD( tag ) \ + ( FT_VALIDATE_GX_START << FT_VALIDATE_##tag##_INDEX ) + + + /************************************************************************** + * + * @enum: + * FT_VALIDATE_GXXXX + * + * @description: + * A list of bit-field constants used with @FT_TrueTypeGX_Validate to + * indicate which TrueTypeGX/AAT Type tables should be validated. + * + * @values: + * FT_VALIDATE_feat :: + * Validate 'feat' table. + * + * FT_VALIDATE_mort :: + * Validate 'mort' table. + * + * FT_VALIDATE_morx :: + * Validate 'morx' table. + * + * FT_VALIDATE_bsln :: + * Validate 'bsln' table. + * + * FT_VALIDATE_just :: + * Validate 'just' table. + * + * FT_VALIDATE_kern :: + * Validate 'kern' table. + * + * FT_VALIDATE_opbd :: + * Validate 'opbd' table. + * + * FT_VALIDATE_trak :: + * Validate 'trak' table. + * + * FT_VALIDATE_prop :: + * Validate 'prop' table. + * + * FT_VALIDATE_lcar :: + * Validate 'lcar' table. + * + * FT_VALIDATE_GX :: + * Validate all TrueTypeGX tables (feat, mort, morx, bsln, just, kern, + * opbd, trak, prop and lcar). + * + */ + +#define FT_VALIDATE_feat FT_VALIDATE_GX_BITFIELD( feat ) +#define FT_VALIDATE_mort FT_VALIDATE_GX_BITFIELD( mort ) +#define FT_VALIDATE_morx FT_VALIDATE_GX_BITFIELD( morx ) +#define FT_VALIDATE_bsln FT_VALIDATE_GX_BITFIELD( bsln ) +#define FT_VALIDATE_just FT_VALIDATE_GX_BITFIELD( just ) +#define FT_VALIDATE_kern FT_VALIDATE_GX_BITFIELD( kern ) +#define FT_VALIDATE_opbd FT_VALIDATE_GX_BITFIELD( opbd ) +#define FT_VALIDATE_trak FT_VALIDATE_GX_BITFIELD( trak ) +#define FT_VALIDATE_prop FT_VALIDATE_GX_BITFIELD( prop ) +#define FT_VALIDATE_lcar FT_VALIDATE_GX_BITFIELD( lcar ) + +#define FT_VALIDATE_GX ( FT_VALIDATE_feat | \ + FT_VALIDATE_mort | \ + FT_VALIDATE_morx | \ + FT_VALIDATE_bsln | \ + FT_VALIDATE_just | \ + FT_VALIDATE_kern | \ + FT_VALIDATE_opbd | \ + FT_VALIDATE_trak | \ + FT_VALIDATE_prop | \ + FT_VALIDATE_lcar ) + + + /************************************************************************** + * + * @function: + * FT_TrueTypeGX_Validate + * + * @description: + * Validate various TrueTypeGX tables to assure that all offsets and + * indices are valid. The idea is that a higher-level library that + * actually does the text layout can access those tables without error + * checking (which can be quite time consuming). + * + * @input: + * face :: + * A handle to the input face. + * + * validation_flags :: + * A bit field that specifies the tables to be validated. See + * @FT_VALIDATE_GXXXX for possible values. + * + * table_length :: + * The size of the `tables` array. Normally, @FT_VALIDATE_GX_LENGTH + * should be passed. + * + * @output: + * tables :: + * The array where all validated sfnt tables are stored. The array + * itself must be allocated by a client. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * This function only works with TrueTypeGX fonts, returning an error + * otherwise. + * + * After use, the application should deallocate the buffers pointed to by + * each `tables` element, by calling @FT_TrueTypeGX_Free. A `NULL` value + * indicates that the table either doesn't exist in the font, the + * application hasn't asked for validation, or the validator doesn't have + * the ability to validate the sfnt table. + */ + FT_EXPORT( FT_Error ) + FT_TrueTypeGX_Validate( FT_Face face, + FT_UInt validation_flags, + FT_Bytes tables[FT_VALIDATE_GX_LENGTH], + FT_UInt table_length ); + + + /************************************************************************** + * + * @function: + * FT_TrueTypeGX_Free + * + * @description: + * Free the buffer allocated by TrueTypeGX validator. + * + * @input: + * face :: + * A handle to the input face. + * + * table :: + * The pointer to the buffer allocated by @FT_TrueTypeGX_Validate. + * + * @note: + * This function must be used to free the buffer allocated by + * @FT_TrueTypeGX_Validate only. + */ + FT_EXPORT( void ) + FT_TrueTypeGX_Free( FT_Face face, + FT_Bytes table ); + + + /************************************************************************** + * + * @enum: + * FT_VALIDATE_CKERNXXX + * + * @description: + * A list of bit-field constants used with @FT_ClassicKern_Validate to + * indicate the classic kern dialect or dialects. If the selected type + * doesn't fit, @FT_ClassicKern_Validate regards the table as invalid. + * + * @values: + * FT_VALIDATE_MS :: + * Handle the 'kern' table as a classic Microsoft kern table. + * + * FT_VALIDATE_APPLE :: + * Handle the 'kern' table as a classic Apple kern table. + * + * FT_VALIDATE_CKERN :: + * Handle the 'kern' as either classic Apple or Microsoft kern table. + */ +#define FT_VALIDATE_MS ( FT_VALIDATE_GX_START << 0 ) +#define FT_VALIDATE_APPLE ( FT_VALIDATE_GX_START << 1 ) + +#define FT_VALIDATE_CKERN ( FT_VALIDATE_MS | FT_VALIDATE_APPLE ) + + + /************************************************************************** + * + * @function: + * FT_ClassicKern_Validate + * + * @description: + * Validate classic (16-bit format) kern table to assure that the + * offsets and indices are valid. The idea is that a higher-level + * library that actually does the text layout can access those tables + * without error checking (which can be quite time consuming). + * + * The 'kern' table validator in @FT_TrueTypeGX_Validate deals with both + * the new 32-bit format and the classic 16-bit format, while + * FT_ClassicKern_Validate only supports the classic 16-bit format. + * + * @input: + * face :: + * A handle to the input face. + * + * validation_flags :: + * A bit field that specifies the dialect to be validated. See + * @FT_VALIDATE_CKERNXXX for possible values. + * + * @output: + * ckern_table :: + * A pointer to the kern table. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * After use, the application should deallocate the buffers pointed to by + * `ckern_table`, by calling @FT_ClassicKern_Free. A `NULL` value + * indicates that the table doesn't exist in the font. + */ + FT_EXPORT( FT_Error ) + FT_ClassicKern_Validate( FT_Face face, + FT_UInt validation_flags, + FT_Bytes *ckern_table ); + + + /************************************************************************** + * + * @function: + * FT_ClassicKern_Free + * + * @description: + * Free the buffer allocated by classic Kern validator. + * + * @input: + * face :: + * A handle to the input face. + * + * table :: + * The pointer to the buffer that is allocated by + * @FT_ClassicKern_Validate. + * + * @note: + * This function must be used to free the buffer allocated by + * @FT_ClassicKern_Validate only. + */ + FT_EXPORT( void ) + FT_ClassicKern_Free( FT_Face face, + FT_Bytes table ); + + /* */ + + +FT_END_HEADER + +#endif /* FTGXVAL_H_ */ + + +/* END */ diff --git a/dependencies/linux64/include/freetype2/freetype/ftgzip.h b/dependencies/linux64/include/freetype2/freetype/ftgzip.h new file mode 100644 index 0000000..9516dc0 --- /dev/null +++ b/dependencies/linux64/include/freetype2/freetype/ftgzip.h @@ -0,0 +1,151 @@ +/**************************************************************************** + * + * ftgzip.h + * + * Gzip-compressed stream support. + * + * Copyright (C) 2002-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + +#ifndef FTGZIP_H_ +#define FTGZIP_H_ + +#include + +#ifdef FREETYPE_H +#error "freetype.h of FreeType 1 has been loaded!" +#error "Please fix the directory search order for header files" +#error "so that freetype.h of FreeType 2 is found first." +#endif + + +FT_BEGIN_HEADER + + /************************************************************************** + * + * @section: + * gzip + * + * @title: + * GZIP Streams + * + * @abstract: + * Using gzip-compressed font files. + * + * @description: + * In certain builds of the library, gzip compression recognition is + * automatically handled when calling @FT_New_Face or @FT_Open_Face. + * This means that if no font driver is capable of handling the raw + * compressed file, the library will try to open a gzipped stream from it + * and re-open the face with it. + * + * The stream implementation is very basic and resets the decompression + * process each time seeking backwards is needed within the stream, + * which significantly undermines the performance. + * + * This section contains the declaration of Gzip-specific functions. + * + */ + + + /************************************************************************** + * + * @function: + * FT_Stream_OpenGzip + * + * @description: + * Open a new stream to parse gzip-compressed font files. This is mainly + * used to support the compressed `*.pcf.gz` fonts that come with + * XFree86. + * + * @input: + * stream :: + * The target embedding stream. + * + * source :: + * The source stream. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * The source stream must be opened _before_ calling this function. + * + * Calling the internal function `FT_Stream_Close` on the new stream will + * **not** call `FT_Stream_Close` on the source stream. None of the + * stream objects will be released to the heap. + * + * This function may return `FT_Err_Unimplemented_Feature` if your build + * of FreeType was not compiled with zlib support. + */ + FT_EXPORT( FT_Error ) + FT_Stream_OpenGzip( FT_Stream stream, + FT_Stream source ); + + + /************************************************************************** + * + * @function: + * FT_Gzip_Uncompress + * + * @description: + * Decompress a zipped input buffer into an output buffer. This function + * is modeled after zlib's `uncompress` function. + * + * @input: + * memory :: + * A FreeType memory handle. + * + * input :: + * The input buffer. + * + * input_len :: + * The length of the input buffer. + * + * @output: + * output :: + * The output buffer. + * + * @inout: + * output_len :: + * Before calling the function, this is the total size of the output + * buffer, which must be large enough to hold the entire uncompressed + * data (so the size of the uncompressed data must be known in + * advance). After calling the function, `output_len` is the size of + * the used data in `output`. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * This function may return `FT_Err_Unimplemented_Feature` if your build + * of FreeType was not compiled with zlib support. + * + * @since: + * 2.5.1 + */ + FT_EXPORT( FT_Error ) + FT_Gzip_Uncompress( FT_Memory memory, + FT_Byte* output, + FT_ULong* output_len, + const FT_Byte* input, + FT_ULong input_len ); + + /* */ + + +FT_END_HEADER + +#endif /* FTGZIP_H_ */ + + +/* END */ diff --git a/dependencies/linux64/include/freetype2/freetype/ftimage.h b/dependencies/linux64/include/freetype2/freetype/ftimage.h new file mode 100644 index 0000000..894dbdc --- /dev/null +++ b/dependencies/linux64/include/freetype2/freetype/ftimage.h @@ -0,0 +1,1293 @@ +/**************************************************************************** + * + * ftimage.h + * + * FreeType glyph image formats and default raster interface + * (specification). + * + * Copyright (C) 1996-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + /************************************************************************** + * + * Note: A 'raster' is simply a scan-line converter, used to render + * `FT_Outline`s into `FT_Bitmap`s. + * + * Note: This file can be used for `STANDALONE_` compilation of raster + * (B/W) and smooth (anti-aliased) renderers. Therefore, it must + * rely on standard variable types only instead of aliases in + * `fttypes.h`. + * + */ + + +#ifndef FTIMAGE_H_ +#define FTIMAGE_H_ + + +FT_BEGIN_HEADER + + + /************************************************************************** + * + * @section: + * basic_types + * + */ + + + /************************************************************************** + * + * @type: + * FT_Pos + * + * @description: + * The type FT_Pos is used to store vectorial coordinates. Depending on + * the context, these can represent distances in integer font units, or + * 16.16, or 26.6 fixed-point pixel coordinates. + */ + typedef signed long FT_Pos; + + + /************************************************************************** + * + * @struct: + * FT_Vector + * + * @description: + * A simple structure used to store a 2D vector; coordinates are of the + * FT_Pos type. + * + * @fields: + * x :: + * The horizontal coordinate. + * y :: + * The vertical coordinate. + */ + typedef struct FT_Vector_ + { + FT_Pos x; + FT_Pos y; + + } FT_Vector; + + + /************************************************************************** + * + * @struct: + * FT_BBox + * + * @description: + * A structure used to hold an outline's bounding box, i.e., the + * coordinates of its extrema in the horizontal and vertical directions. + * + * @fields: + * xMin :: + * The horizontal minimum (left-most). + * + * yMin :: + * The vertical minimum (bottom-most). + * + * xMax :: + * The horizontal maximum (right-most). + * + * yMax :: + * The vertical maximum (top-most). + * + * @note: + * The bounding box is specified with the coordinates of the lower left + * and the upper right corner. In PostScript, those values are often + * called (llx,lly) and (urx,ury), respectively. + * + * If `yMin` is negative, this value gives the glyph's descender. + * Otherwise, the glyph doesn't descend below the baseline. Similarly, + * if `ymax` is positive, this value gives the glyph's ascender. + * + * `xMin` gives the horizontal distance from the glyph's origin to the + * left edge of the glyph's bounding box. If `xMin` is negative, the + * glyph extends to the left of the origin. + */ + typedef struct FT_BBox_ + { + FT_Pos xMin, yMin; + FT_Pos xMax, yMax; + + } FT_BBox; + + + /************************************************************************** + * + * @enum: + * FT_Pixel_Mode + * + * @description: + * An enumeration type used to describe the format of pixels in a given + * bitmap. Note that additional formats may be added in the future. + * + * @values: + * FT_PIXEL_MODE_NONE :: + * Value~0 is reserved. + * + * FT_PIXEL_MODE_MONO :: + * A monochrome bitmap, using 1~bit per pixel. Note that pixels are + * stored in most-significant order (MSB), which means that the + * left-most pixel in a byte has value 128. + * + * FT_PIXEL_MODE_GRAY :: + * An 8-bit bitmap, generally used to represent anti-aliased glyph + * images. Each pixel is stored in one byte. Note that the number of + * 'gray' levels is stored in the `num_grays` field of the @FT_Bitmap + * structure (it generally is 256). + * + * FT_PIXEL_MODE_GRAY2 :: + * A 2-bit per pixel bitmap, used to represent embedded anti-aliased + * bitmaps in font files according to the OpenType specification. We + * haven't found a single font using this format, however. + * + * FT_PIXEL_MODE_GRAY4 :: + * A 4-bit per pixel bitmap, representing embedded anti-aliased bitmaps + * in font files according to the OpenType specification. We haven't + * found a single font using this format, however. + * + * FT_PIXEL_MODE_LCD :: + * An 8-bit bitmap, representing RGB or BGR decimated glyph images used + * for display on LCD displays; the bitmap is three times wider than + * the original glyph image. See also @FT_RENDER_MODE_LCD. + * + * FT_PIXEL_MODE_LCD_V :: + * An 8-bit bitmap, representing RGB or BGR decimated glyph images used + * for display on rotated LCD displays; the bitmap is three times + * taller than the original glyph image. See also + * @FT_RENDER_MODE_LCD_V. + * + * FT_PIXEL_MODE_BGRA :: + * [Since 2.5] An image with four 8-bit channels per pixel, + * representing a color image (such as emoticons) with alpha channel. + * For each pixel, the format is BGRA, which means, the blue channel + * comes first in memory. The color channels are pre-multiplied and in + * the sRGB colorspace. For example, full red at half-translucent + * opacity will be represented as '00,00,80,80', not '00,00,FF,80'. + * See also @FT_LOAD_COLOR. + */ + typedef enum FT_Pixel_Mode_ + { + FT_PIXEL_MODE_NONE = 0, + FT_PIXEL_MODE_MONO, + FT_PIXEL_MODE_GRAY, + FT_PIXEL_MODE_GRAY2, + FT_PIXEL_MODE_GRAY4, + FT_PIXEL_MODE_LCD, + FT_PIXEL_MODE_LCD_V, + FT_PIXEL_MODE_BGRA, + + FT_PIXEL_MODE_MAX /* do not remove */ + + } FT_Pixel_Mode; + + + /* these constants are deprecated; use the corresponding `FT_Pixel_Mode` */ + /* values instead. */ +#define ft_pixel_mode_none FT_PIXEL_MODE_NONE +#define ft_pixel_mode_mono FT_PIXEL_MODE_MONO +#define ft_pixel_mode_grays FT_PIXEL_MODE_GRAY +#define ft_pixel_mode_pal2 FT_PIXEL_MODE_GRAY2 +#define ft_pixel_mode_pal4 FT_PIXEL_MODE_GRAY4 + + /* */ + + /* For debugging, the @FT_Pixel_Mode enumeration must stay in sync */ + /* with the `pixel_modes` array in file `ftobjs.c`. */ + + + /************************************************************************** + * + * @struct: + * FT_Bitmap + * + * @description: + * A structure used to describe a bitmap or pixmap to the raster. Note + * that we now manage pixmaps of various depths through the `pixel_mode` + * field. + * + * @fields: + * rows :: + * The number of bitmap rows. + * + * width :: + * The number of pixels in bitmap row. + * + * pitch :: + * The pitch's absolute value is the number of bytes taken by one + * bitmap row, including padding. However, the pitch is positive when + * the bitmap has a 'down' flow, and negative when it has an 'up' flow. + * In all cases, the pitch is an offset to add to a bitmap pointer in + * order to go down one row. + * + * Note that 'padding' means the alignment of a bitmap to a byte + * border, and FreeType functions normally align to the smallest + * possible integer value. + * + * For the B/W rasterizer, `pitch` is always an even number. + * + * To change the pitch of a bitmap (say, to make it a multiple of 4), + * use @FT_Bitmap_Convert. Alternatively, you might use callback + * functions to directly render to the application's surface; see the + * file `example2.cpp` in the tutorial for a demonstration. + * + * buffer :: + * A typeless pointer to the bitmap buffer. This value should be + * aligned on 32-bit boundaries in most cases. + * + * num_grays :: + * This field is only used with @FT_PIXEL_MODE_GRAY; it gives the + * number of gray levels used in the bitmap. + * + * pixel_mode :: + * The pixel mode, i.e., how pixel bits are stored. See @FT_Pixel_Mode + * for possible values. + * + * palette_mode :: + * This field is intended for paletted pixel modes; it indicates how + * the palette is stored. Not used currently. + * + * palette :: + * A typeless pointer to the bitmap palette; this field is intended for + * paletted pixel modes. Not used currently. + * + * @note: + * `width` and `rows` refer to the *physical* size of the bitmap, not the + * *logical* one. For example, if @FT_Pixel_Mode is set to + * `FT_PIXEL_MODE_LCD`, the logical width is a just a third of the + * physical one. + * + * An empty bitmap with a NULL `buffer` is valid, with `rows` and/or + * `pitch` also set to 0. Such bitmaps might be produced while rendering + * empty or degenerate outlines. + */ + typedef struct FT_Bitmap_ + { + unsigned int rows; + unsigned int width; + int pitch; + unsigned char* buffer; + unsigned short num_grays; + unsigned char pixel_mode; + unsigned char palette_mode; + void* palette; + + } FT_Bitmap; + + + /************************************************************************** + * + * @section: + * outline_processing + * + */ + + + /************************************************************************** + * + * @struct: + * FT_Outline + * + * @description: + * This structure is used to describe an outline to the scan-line + * converter. + * + * @fields: + * n_contours :: + * The number of contours in the outline. + * + * n_points :: + * The number of points in the outline. + * + * points :: + * A pointer to an array of `n_points` @FT_Vector elements, giving the + * outline's point coordinates. + * + * tags :: + * A pointer to an array of `n_points` chars, giving each outline + * point's type. + * + * If bit~0 is unset, the point is 'off' the curve, i.e., a Bezier + * control point, while it is 'on' if set. + * + * Bit~1 is meaningful for 'off' points only. If set, it indicates a + * third-order Bezier arc control point; and a second-order control + * point if unset. + * + * If bit~2 is set, bits 5-7 contain the drop-out mode (as defined in + * the OpenType specification; the value is the same as the argument to + * the 'SCANTYPE' instruction). + * + * Bits 3 and~4 are reserved for internal purposes. + * + * contours :: + * An array of `n_contours` shorts, giving the end point of each + * contour within the outline. For example, the first contour is + * defined by the points '0' to `contours[0]`, the second one is + * defined by the points `contours[0]+1` to `contours[1]`, etc. + * + * flags :: + * A set of bit flags used to characterize the outline and give hints + * to the scan-converter and hinter on how to convert/grid-fit it. See + * @FT_OUTLINE_XXX. + * + * @note: + * The B/W rasterizer only checks bit~2 in the `tags` array for the first + * point of each contour. The drop-out mode as given with + * @FT_OUTLINE_IGNORE_DROPOUTS, @FT_OUTLINE_SMART_DROPOUTS, and + * @FT_OUTLINE_INCLUDE_STUBS in `flags` is then overridden. + */ + typedef struct FT_Outline_ + { + unsigned short n_contours; /* number of contours in glyph */ + unsigned short n_points; /* number of points in the glyph */ + + FT_Vector* points; /* the outline's points */ + unsigned char* tags; /* the points flags */ + unsigned short* contours; /* the contour end points */ + + int flags; /* outline masks */ + + } FT_Outline; + + /* */ + + /* Following limits must be consistent with */ + /* FT_Outline.{n_contours,n_points} */ +#define FT_OUTLINE_CONTOURS_MAX USHRT_MAX +#define FT_OUTLINE_POINTS_MAX USHRT_MAX + + + /************************************************************************** + * + * @enum: + * FT_OUTLINE_XXX + * + * @description: + * A list of bit-field constants used for the flags in an outline's + * `flags` field. + * + * @values: + * FT_OUTLINE_NONE :: + * Value~0 is reserved. + * + * FT_OUTLINE_OWNER :: + * If set, this flag indicates that the outline's field arrays (i.e., + * `points`, `flags`, and `contours`) are 'owned' by the outline + * object, and should thus be freed when it is destroyed. + * + * FT_OUTLINE_EVEN_ODD_FILL :: + * By default, outlines are filled using the non-zero winding rule. If + * set to 1, the outline will be filled using the even-odd fill rule + * (only works with the smooth rasterizer). + * + * FT_OUTLINE_REVERSE_FILL :: + * By default, outside contours of an outline are oriented in + * clock-wise direction, as defined in the TrueType specification. + * This flag is set if the outline uses the opposite direction + * (typically for Type~1 fonts). This flag is ignored by the scan + * converter. + * + * FT_OUTLINE_IGNORE_DROPOUTS :: + * By default, the scan converter will try to detect drop-outs in an + * outline and correct the glyph bitmap to ensure consistent shape + * continuity. If set, this flag hints the scan-line converter to + * ignore such cases. See below for more information. + * + * FT_OUTLINE_SMART_DROPOUTS :: + * Select smart dropout control. If unset, use simple dropout control. + * Ignored if @FT_OUTLINE_IGNORE_DROPOUTS is set. See below for more + * information. + * + * FT_OUTLINE_INCLUDE_STUBS :: + * If set, turn pixels on for 'stubs', otherwise exclude them. Ignored + * if @FT_OUTLINE_IGNORE_DROPOUTS is set. See below for more + * information. + * + * FT_OUTLINE_OVERLAP :: + * [Since 2.10.3] This flag indicates that this outline contains + * overlapping contours and the anti-aliased renderer should perform + * oversampling to mitigate possible artifacts. This flag should _not_ + * be set for well designed glyphs without overlaps because it quadruples + * the rendering time. + * + * FT_OUTLINE_HIGH_PRECISION :: + * This flag indicates that the scan-line converter should try to + * convert this outline to bitmaps with the highest possible quality. + * It is typically set for small character sizes. Note that this is + * only a hint that might be completely ignored by a given + * scan-converter. + * + * FT_OUTLINE_SINGLE_PASS :: + * This flag is set to force a given scan-converter to only use a + * single pass over the outline to render a bitmap glyph image. + * Normally, it is set for very large character sizes. It is only a + * hint that might be completely ignored by a given scan-converter. + * + * @note: + * The flags @FT_OUTLINE_IGNORE_DROPOUTS, @FT_OUTLINE_SMART_DROPOUTS, and + * @FT_OUTLINE_INCLUDE_STUBS are ignored by the smooth rasterizer. + * + * There exists a second mechanism to pass the drop-out mode to the B/W + * rasterizer; see the `tags` field in @FT_Outline. + * + * Please refer to the description of the 'SCANTYPE' instruction in the + * [OpenType specification](https://learn.microsoft.com/typography/opentype/spec/tt_instructions#scantype) + * how simple drop-outs, smart drop-outs, and stubs are defined. + */ +#define FT_OUTLINE_NONE 0x0 +#define FT_OUTLINE_OWNER 0x1 +#define FT_OUTLINE_EVEN_ODD_FILL 0x2 +#define FT_OUTLINE_REVERSE_FILL 0x4 +#define FT_OUTLINE_IGNORE_DROPOUTS 0x8 +#define FT_OUTLINE_SMART_DROPOUTS 0x10 +#define FT_OUTLINE_INCLUDE_STUBS 0x20 +#define FT_OUTLINE_OVERLAP 0x40 + +#define FT_OUTLINE_HIGH_PRECISION 0x100 +#define FT_OUTLINE_SINGLE_PASS 0x200 + + + /* these constants are deprecated; use the corresponding */ + /* `FT_OUTLINE_XXX` values instead */ +#define ft_outline_none FT_OUTLINE_NONE +#define ft_outline_owner FT_OUTLINE_OWNER +#define ft_outline_even_odd_fill FT_OUTLINE_EVEN_ODD_FILL +#define ft_outline_reverse_fill FT_OUTLINE_REVERSE_FILL +#define ft_outline_ignore_dropouts FT_OUTLINE_IGNORE_DROPOUTS +#define ft_outline_high_precision FT_OUTLINE_HIGH_PRECISION +#define ft_outline_single_pass FT_OUTLINE_SINGLE_PASS + + /* */ + +#define FT_CURVE_TAG( flag ) ( flag & 0x03 ) + + /* see the `tags` field in `FT_Outline` for a description of the values */ +#define FT_CURVE_TAG_ON 0x01 +#define FT_CURVE_TAG_CONIC 0x00 +#define FT_CURVE_TAG_CUBIC 0x02 + +#define FT_CURVE_TAG_HAS_SCANMODE 0x04 + +#define FT_CURVE_TAG_TOUCH_X 0x08 /* reserved for TrueType hinter */ +#define FT_CURVE_TAG_TOUCH_Y 0x10 /* reserved for TrueType hinter */ + +#define FT_CURVE_TAG_TOUCH_BOTH ( FT_CURVE_TAG_TOUCH_X | \ + FT_CURVE_TAG_TOUCH_Y ) + /* values 0x20, 0x40, and 0x80 are reserved */ + + + /* these constants are deprecated; use the corresponding */ + /* `FT_CURVE_TAG_XXX` values instead */ +#define FT_Curve_Tag_On FT_CURVE_TAG_ON +#define FT_Curve_Tag_Conic FT_CURVE_TAG_CONIC +#define FT_Curve_Tag_Cubic FT_CURVE_TAG_CUBIC +#define FT_Curve_Tag_Touch_X FT_CURVE_TAG_TOUCH_X +#define FT_Curve_Tag_Touch_Y FT_CURVE_TAG_TOUCH_Y + + + /************************************************************************** + * + * @functype: + * FT_Outline_MoveToFunc + * + * @description: + * A function pointer type used to describe the signature of a 'move to' + * function during outline walking/decomposition. + * + * A 'move to' is emitted to start a new contour in an outline. + * + * @input: + * to :: + * A pointer to the target point of the 'move to'. + * + * user :: + * A typeless pointer, which is passed from the caller of the + * decomposition function. + * + * @return: + * Error code. 0~means success. + */ + typedef int + (*FT_Outline_MoveToFunc)( const FT_Vector* to, + void* user ); + +#define FT_Outline_MoveTo_Func FT_Outline_MoveToFunc + + + /************************************************************************** + * + * @functype: + * FT_Outline_LineToFunc + * + * @description: + * A function pointer type used to describe the signature of a 'line to' + * function during outline walking/decomposition. + * + * A 'line to' is emitted to indicate a segment in the outline. + * + * @input: + * to :: + * A pointer to the target point of the 'line to'. + * + * user :: + * A typeless pointer, which is passed from the caller of the + * decomposition function. + * + * @return: + * Error code. 0~means success. + */ + typedef int + (*FT_Outline_LineToFunc)( const FT_Vector* to, + void* user ); + +#define FT_Outline_LineTo_Func FT_Outline_LineToFunc + + + /************************************************************************** + * + * @functype: + * FT_Outline_ConicToFunc + * + * @description: + * A function pointer type used to describe the signature of a 'conic to' + * function during outline walking or decomposition. + * + * A 'conic to' is emitted to indicate a second-order Bezier arc in the + * outline. + * + * @input: + * control :: + * An intermediate control point between the last position and the new + * target in `to`. + * + * to :: + * A pointer to the target end point of the conic arc. + * + * user :: + * A typeless pointer, which is passed from the caller of the + * decomposition function. + * + * @return: + * Error code. 0~means success. + */ + typedef int + (*FT_Outline_ConicToFunc)( const FT_Vector* control, + const FT_Vector* to, + void* user ); + +#define FT_Outline_ConicTo_Func FT_Outline_ConicToFunc + + + /************************************************************************** + * + * @functype: + * FT_Outline_CubicToFunc + * + * @description: + * A function pointer type used to describe the signature of a 'cubic to' + * function during outline walking or decomposition. + * + * A 'cubic to' is emitted to indicate a third-order Bezier arc. + * + * @input: + * control1 :: + * A pointer to the first Bezier control point. + * + * control2 :: + * A pointer to the second Bezier control point. + * + * to :: + * A pointer to the target end point. + * + * user :: + * A typeless pointer, which is passed from the caller of the + * decomposition function. + * + * @return: + * Error code. 0~means success. + */ + typedef int + (*FT_Outline_CubicToFunc)( const FT_Vector* control1, + const FT_Vector* control2, + const FT_Vector* to, + void* user ); + +#define FT_Outline_CubicTo_Func FT_Outline_CubicToFunc + + + /************************************************************************** + * + * @struct: + * FT_Outline_Funcs + * + * @description: + * A structure to hold various function pointers used during outline + * decomposition in order to emit segments, conic, and cubic Beziers. + * + * @fields: + * move_to :: + * The 'move to' emitter. + * + * line_to :: + * The segment emitter. + * + * conic_to :: + * The second-order Bezier arc emitter. + * + * cubic_to :: + * The third-order Bezier arc emitter. + * + * shift :: + * The shift that is applied to coordinates before they are sent to the + * emitter. + * + * delta :: + * The delta that is applied to coordinates before they are sent to the + * emitter, but after the shift. + * + * @note: + * The point coordinates sent to the emitters are the transformed version + * of the original coordinates (this is important for high accuracy + * during scan-conversion). The transformation is simple: + * + * ``` + * x' = (x << shift) - delta + * y' = (y << shift) - delta + * ``` + * + * Set the values of `shift` and `delta` to~0 to get the original point + * coordinates. + */ + typedef struct FT_Outline_Funcs_ + { + FT_Outline_MoveToFunc move_to; + FT_Outline_LineToFunc line_to; + FT_Outline_ConicToFunc conic_to; + FT_Outline_CubicToFunc cubic_to; + + int shift; + FT_Pos delta; + + } FT_Outline_Funcs; + + + /************************************************************************** + * + * @section: + * basic_types + * + */ + + + /************************************************************************** + * + * @macro: + * FT_IMAGE_TAG + * + * @description: + * This macro converts four-letter tags to an unsigned long type. + * + * @note: + * Since many 16-bit compilers don't like 32-bit enumerations, you should + * redefine this macro in case of problems to something like this: + * + * ``` + * #define FT_IMAGE_TAG( value, _x1, _x2, _x3, _x4 ) value + * ``` + * + * to get a simple enumeration without assigning special numbers. + */ +#ifndef FT_IMAGE_TAG + +#define FT_IMAGE_TAG( value, _x1, _x2, _x3, _x4 ) \ + value = ( ( FT_STATIC_BYTE_CAST( unsigned long, _x1 ) << 24 ) | \ + ( FT_STATIC_BYTE_CAST( unsigned long, _x2 ) << 16 ) | \ + ( FT_STATIC_BYTE_CAST( unsigned long, _x3 ) << 8 ) | \ + FT_STATIC_BYTE_CAST( unsigned long, _x4 ) ) + +#endif /* FT_IMAGE_TAG */ + + + /************************************************************************** + * + * @enum: + * FT_Glyph_Format + * + * @description: + * An enumeration type used to describe the format of a given glyph + * image. Note that this version of FreeType only supports two image + * formats, even though future font drivers will be able to register + * their own format. + * + * @values: + * FT_GLYPH_FORMAT_NONE :: + * The value~0 is reserved. + * + * FT_GLYPH_FORMAT_COMPOSITE :: + * The glyph image is a composite of several other images. This format + * is _only_ used with @FT_LOAD_NO_RECURSE, and is used to report + * compound glyphs (like accented characters). + * + * FT_GLYPH_FORMAT_BITMAP :: + * The glyph image is a bitmap, and can be described as an @FT_Bitmap. + * You generally need to access the `bitmap` field of the + * @FT_GlyphSlotRec structure to read it. + * + * FT_GLYPH_FORMAT_OUTLINE :: + * The glyph image is a vectorial outline made of line segments and + * Bezier arcs; it can be described as an @FT_Outline; you generally + * want to access the `outline` field of the @FT_GlyphSlotRec structure + * to read it. + * + * FT_GLYPH_FORMAT_PLOTTER :: + * The glyph image is a vectorial path with no inside and outside + * contours. Some Type~1 fonts, like those in the Hershey family, + * contain glyphs in this format. These are described as @FT_Outline, + * but FreeType isn't currently capable of rendering them correctly. + * + * FT_GLYPH_FORMAT_SVG :: + * [Since 2.12] The glyph is represented by an SVG document in the + * 'SVG~' table. + */ + typedef enum FT_Glyph_Format_ + { + FT_IMAGE_TAG( FT_GLYPH_FORMAT_NONE, 0, 0, 0, 0 ), + + FT_IMAGE_TAG( FT_GLYPH_FORMAT_COMPOSITE, 'c', 'o', 'm', 'p' ), + FT_IMAGE_TAG( FT_GLYPH_FORMAT_BITMAP, 'b', 'i', 't', 's' ), + FT_IMAGE_TAG( FT_GLYPH_FORMAT_OUTLINE, 'o', 'u', 't', 'l' ), + FT_IMAGE_TAG( FT_GLYPH_FORMAT_PLOTTER, 'p', 'l', 'o', 't' ), + FT_IMAGE_TAG( FT_GLYPH_FORMAT_SVG, 'S', 'V', 'G', ' ' ) + + } FT_Glyph_Format; + + + /* these constants are deprecated; use the corresponding */ + /* `FT_Glyph_Format` values instead. */ +#define ft_glyph_format_none FT_GLYPH_FORMAT_NONE +#define ft_glyph_format_composite FT_GLYPH_FORMAT_COMPOSITE +#define ft_glyph_format_bitmap FT_GLYPH_FORMAT_BITMAP +#define ft_glyph_format_outline FT_GLYPH_FORMAT_OUTLINE +#define ft_glyph_format_plotter FT_GLYPH_FORMAT_PLOTTER + + + /*************************************************************************/ + /*************************************************************************/ + /*************************************************************************/ + /***** *****/ + /***** R A S T E R D E F I N I T I O N S *****/ + /***** *****/ + /*************************************************************************/ + /*************************************************************************/ + /*************************************************************************/ + + + + /************************************************************************** + * + * @section: + * raster + * + * @title: + * Scanline Converter + * + * @abstract: + * How vectorial outlines are converted into bitmaps and pixmaps. + * + * @description: + * A raster or a rasterizer is a scan converter in charge of producing a + * pixel coverage bitmap that can be used as an alpha channel when + * compositing a glyph with a background. FreeType comes with two + * rasterizers: bilevel `raster1` and anti-aliased `smooth` are two + * separate modules. They are usually called from the high-level + * @FT_Load_Glyph or @FT_Render_Glyph functions and produce the entire + * coverage bitmap at once, while staying largely invisible to users. + * + * Instead of working with complete coverage bitmaps, it is also possible + * to intercept consecutive pixel runs on the same scanline with the same + * coverage, called _spans_, and process them individually. Only the + * `smooth` rasterizer permits this when calling @FT_Outline_Render with + * @FT_Raster_Params as described below. + * + * Working with either complete bitmaps or spans it is important to think + * of them as colorless coverage objects suitable as alpha channels to + * blend arbitrary colors with a background. For best results, it is + * recommended to use gamma correction, too. + * + * This section also describes the public API needed to set up alternative + * @FT_Renderer modules. + * + * @order: + * FT_Span + * FT_SpanFunc + * FT_Raster_Params + * FT_RASTER_FLAG_XXX + * + * FT_Raster + * FT_Raster_NewFunc + * FT_Raster_DoneFunc + * FT_Raster_ResetFunc + * FT_Raster_SetModeFunc + * FT_Raster_RenderFunc + * FT_Raster_Funcs + * + */ + + + /************************************************************************** + * + * @struct: + * FT_Span + * + * @description: + * A structure to model a single span of consecutive pixels when + * rendering an anti-aliased bitmap. + * + * @fields: + * x :: + * The span's horizontal start position. + * + * len :: + * The span's length in pixels. + * + * coverage :: + * The span color/coverage, ranging from 0 (background) to 255 + * (foreground). + * + * @note: + * This structure is used by the span drawing callback type named + * @FT_SpanFunc that takes the y~coordinate of the span as a parameter. + * + * The anti-aliased rasterizer produces coverage values from 0 to 255, + * that is, from completely transparent to completely opaque. + */ + typedef struct FT_Span_ + { + short x; + unsigned short len; + unsigned char coverage; + + } FT_Span; + + + /************************************************************************** + * + * @functype: + * FT_SpanFunc + * + * @description: + * A function used as a call-back by the anti-aliased renderer in order + * to let client applications draw themselves the pixel spans on each + * scan line. + * + * @input: + * y :: + * The scanline's upward y~coordinate. + * + * count :: + * The number of spans to draw on this scanline. + * + * spans :: + * A table of `count` spans to draw on the scanline. + * + * user :: + * User-supplied data that is passed to the callback. + * + * @note: + * This callback allows client applications to directly render the spans + * of the anti-aliased bitmap to any kind of surfaces. + * + * This can be used to write anti-aliased outlines directly to a given + * background bitmap using alpha compositing. It can also be used for + * oversampling and averaging. + */ + typedef void + (*FT_SpanFunc)( int y, + int count, + const FT_Span* spans, + void* user ); + +#define FT_Raster_Span_Func FT_SpanFunc + + + /************************************************************************** + * + * @functype: + * FT_Raster_BitTest_Func + * + * @description: + * Deprecated, unimplemented. + */ + typedef int + (*FT_Raster_BitTest_Func)( int y, + int x, + void* user ); + + + /************************************************************************** + * + * @functype: + * FT_Raster_BitSet_Func + * + * @description: + * Deprecated, unimplemented. + */ + typedef void + (*FT_Raster_BitSet_Func)( int y, + int x, + void* user ); + + + /************************************************************************** + * + * @enum: + * FT_RASTER_FLAG_XXX + * + * @description: + * A list of bit flag constants as used in the `flags` field of a + * @FT_Raster_Params structure. + * + * @values: + * FT_RASTER_FLAG_DEFAULT :: + * This value is 0. + * + * FT_RASTER_FLAG_AA :: + * This flag is set to indicate that an anti-aliased glyph image should + * be generated. Otherwise, it will be monochrome (1-bit). + * + * FT_RASTER_FLAG_DIRECT :: + * This flag is set to indicate direct rendering. In this mode, client + * applications must provide their own span callback. This lets them + * directly draw or compose over an existing bitmap. If this bit is + * _not_ set, the target pixmap's buffer _must_ be zeroed before + * rendering and the output will be clipped to its size. + * + * Direct rendering is only possible with anti-aliased glyphs. + * + * FT_RASTER_FLAG_CLIP :: + * This flag is only used in direct rendering mode. If set, the output + * will be clipped to a box specified in the `clip_box` field of the + * @FT_Raster_Params structure. Otherwise, the `clip_box` is + * effectively set to the bounding box and all spans are generated. + * + * FT_RASTER_FLAG_SDF :: + * This flag is set to indicate that a signed distance field glyph + * image should be generated. This is only used while rendering with + * the @FT_RENDER_MODE_SDF render mode. + */ +#define FT_RASTER_FLAG_DEFAULT 0x0 +#define FT_RASTER_FLAG_AA 0x1 +#define FT_RASTER_FLAG_DIRECT 0x2 +#define FT_RASTER_FLAG_CLIP 0x4 +#define FT_RASTER_FLAG_SDF 0x8 + + /* these constants are deprecated; use the corresponding */ + /* `FT_RASTER_FLAG_XXX` values instead */ +#define ft_raster_flag_default FT_RASTER_FLAG_DEFAULT +#define ft_raster_flag_aa FT_RASTER_FLAG_AA +#define ft_raster_flag_direct FT_RASTER_FLAG_DIRECT +#define ft_raster_flag_clip FT_RASTER_FLAG_CLIP + + + /************************************************************************** + * + * @struct: + * FT_Raster_Params + * + * @description: + * A structure to hold the parameters used by a raster's render function, + * passed as an argument to @FT_Outline_Render. + * + * @fields: + * target :: + * The target bitmap. + * + * source :: + * A pointer to the source glyph image (e.g., an @FT_Outline). + * + * flags :: + * The rendering flags. + * + * gray_spans :: + * The gray span drawing callback. + * + * black_spans :: + * Unused. + * + * bit_test :: + * Unused. + * + * bit_set :: + * Unused. + * + * user :: + * User-supplied data that is passed to each drawing callback. + * + * clip_box :: + * An optional span clipping box expressed in _integer_ pixels + * (not in 26.6 fixed-point units). + * + * @note: + * The @FT_RASTER_FLAG_AA bit flag must be set in the `flags` to + * generate an anti-aliased glyph bitmap, otherwise a monochrome bitmap + * is generated. The `target` should have appropriate pixel mode and its + * dimensions define the clipping region. + * + * If both @FT_RASTER_FLAG_AA and @FT_RASTER_FLAG_DIRECT bit flags + * are set in `flags`, the raster calls an @FT_SpanFunc callback + * `gray_spans` with `user` data as an argument ignoring `target`. This + * allows direct composition over a pre-existing user surface to perform + * the span drawing and composition. To optionally clip the spans, set + * the @FT_RASTER_FLAG_CLIP flag and `clip_box`. The monochrome raster + * does not support the direct mode. + * + * The gray-level rasterizer always uses 256 gray levels. If you want + * fewer gray levels, you have to use @FT_RASTER_FLAG_DIRECT and reduce + * the levels in the callback function. + */ + typedef struct FT_Raster_Params_ + { + const FT_Bitmap* target; + const void* source; + int flags; + FT_SpanFunc gray_spans; + FT_SpanFunc black_spans; /* unused */ + FT_Raster_BitTest_Func bit_test; /* unused */ + FT_Raster_BitSet_Func bit_set; /* unused */ + void* user; + FT_BBox clip_box; + + } FT_Raster_Params; + + + /************************************************************************** + * + * @type: + * FT_Raster + * + * @description: + * An opaque handle (pointer) to a raster object. Each object can be + * used independently to convert an outline into a bitmap or pixmap. + * + * @note: + * In FreeType 2, all rasters are now encapsulated within specific + * @FT_Renderer modules and only used in their context. + * + */ + typedef struct FT_RasterRec_* FT_Raster; + + + /************************************************************************** + * + * @functype: + * FT_Raster_NewFunc + * + * @description: + * A function used to create a new raster object. + * + * @input: + * memory :: + * A handle to the memory allocator. + * + * @output: + * raster :: + * A handle to the new raster object. + * + * @return: + * Error code. 0~means success. + * + * @note: + * The `memory` parameter is a typeless pointer in order to avoid + * un-wanted dependencies on the rest of the FreeType code. In practice, + * it is an @FT_Memory object, i.e., a handle to the standard FreeType + * memory allocator. However, this field can be completely ignored by a + * given raster implementation. + */ + typedef int + (*FT_Raster_NewFunc)( void* memory, + FT_Raster* raster ); + +#define FT_Raster_New_Func FT_Raster_NewFunc + + + /************************************************************************** + * + * @functype: + * FT_Raster_DoneFunc + * + * @description: + * A function used to destroy a given raster object. + * + * @input: + * raster :: + * A handle to the raster object. + */ + typedef void + (*FT_Raster_DoneFunc)( FT_Raster raster ); + +#define FT_Raster_Done_Func FT_Raster_DoneFunc + + + /************************************************************************** + * + * @functype: + * FT_Raster_ResetFunc + * + * @description: + * FreeType used to provide an area of memory called the 'render pool' + * available to all registered rasterizers. This was not thread safe, + * however, and now FreeType never allocates this pool. + * + * This function is called after a new raster object is created. + * + * @input: + * raster :: + * A handle to the new raster object. + * + * pool_base :: + * Previously, the address in memory of the render pool. Set this to + * `NULL`. + * + * pool_size :: + * Previously, the size in bytes of the render pool. Set this to 0. + * + * @note: + * Rasterizers should rely on dynamic or stack allocation if they want to + * (a handle to the memory allocator is passed to the rasterizer + * constructor). + */ + typedef void + (*FT_Raster_ResetFunc)( FT_Raster raster, + unsigned char* pool_base, + unsigned long pool_size ); + +#define FT_Raster_Reset_Func FT_Raster_ResetFunc + + + /************************************************************************** + * + * @functype: + * FT_Raster_SetModeFunc + * + * @description: + * This function is a generic facility to change modes or attributes in a + * given raster. This can be used for debugging purposes, or simply to + * allow implementation-specific 'features' in a given raster module. + * + * @input: + * raster :: + * A handle to the new raster object. + * + * mode :: + * A 4-byte tag used to name the mode or property. + * + * args :: + * A pointer to the new mode/property to use. + */ + typedef int + (*FT_Raster_SetModeFunc)( FT_Raster raster, + unsigned long mode, + void* args ); + +#define FT_Raster_Set_Mode_Func FT_Raster_SetModeFunc + + + /************************************************************************** + * + * @functype: + * FT_Raster_RenderFunc + * + * @description: + * Invoke a given raster to scan-convert a given glyph image into a + * target bitmap. + * + * @input: + * raster :: + * A handle to the raster object. + * + * params :: + * A pointer to an @FT_Raster_Params structure used to store the + * rendering parameters. + * + * @return: + * Error code. 0~means success. + * + * @note: + * The exact format of the source image depends on the raster's glyph + * format defined in its @FT_Raster_Funcs structure. It can be an + * @FT_Outline or anything else in order to support a large array of + * glyph formats. + * + * Note also that the render function can fail and return a + * `FT_Err_Unimplemented_Feature` error code if the raster used does not + * support direct composition. + */ + typedef int + (*FT_Raster_RenderFunc)( FT_Raster raster, + const FT_Raster_Params* params ); + +#define FT_Raster_Render_Func FT_Raster_RenderFunc + + + /************************************************************************** + * + * @struct: + * FT_Raster_Funcs + * + * @description: + * A structure used to describe a given raster class to the library. + * + * @fields: + * glyph_format :: + * The supported glyph format for this raster. + * + * raster_new :: + * The raster constructor. + * + * raster_reset :: + * Used to reset the render pool within the raster. + * + * raster_render :: + * A function to render a glyph into a given bitmap. + * + * raster_done :: + * The raster destructor. + */ + typedef struct FT_Raster_Funcs_ + { + FT_Glyph_Format glyph_format; + + FT_Raster_NewFunc raster_new; + FT_Raster_ResetFunc raster_reset; + FT_Raster_SetModeFunc raster_set_mode; + FT_Raster_RenderFunc raster_render; + FT_Raster_DoneFunc raster_done; + + } FT_Raster_Funcs; + + /* */ + + +FT_END_HEADER + +#endif /* FTIMAGE_H_ */ + + +/* END */ + + +/* Local Variables: */ +/* coding: utf-8 */ +/* End: */ diff --git a/dependencies/linux64/include/freetype2/freetype/ftincrem.h b/dependencies/linux64/include/freetype2/freetype/ftincrem.h new file mode 100644 index 0000000..816581b --- /dev/null +++ b/dependencies/linux64/include/freetype2/freetype/ftincrem.h @@ -0,0 +1,348 @@ +/**************************************************************************** + * + * ftincrem.h + * + * FreeType incremental loading (specification). + * + * Copyright (C) 2002-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + +#ifndef FTINCREM_H_ +#define FTINCREM_H_ + +#include +#include + +#ifdef FREETYPE_H +#error "freetype.h of FreeType 1 has been loaded!" +#error "Please fix the directory search order for header files" +#error "so that freetype.h of FreeType 2 is found first." +#endif + + +FT_BEGIN_HEADER + + /************************************************************************** + * + * @section: + * incremental + * + * @title: + * Incremental Loading + * + * @abstract: + * Custom Glyph Loading. + * + * @description: + * This section contains various functions used to perform so-called + * 'incremental' glyph loading. This is a mode where all glyphs loaded + * from a given @FT_Face are provided by the client application. + * + * Apart from that, all other tables are loaded normally from the font + * file. This mode is useful when FreeType is used within another + * engine, e.g., a PostScript Imaging Processor. + * + * To enable this mode, you must use @FT_Open_Face, passing an + * @FT_Parameter with the @FT_PARAM_TAG_INCREMENTAL tag and an + * @FT_Incremental_Interface value. See the comments for + * @FT_Incremental_InterfaceRec for an example. + * + */ + + + /************************************************************************** + * + * @type: + * FT_Incremental + * + * @description: + * An opaque type describing a user-provided object used to implement + * 'incremental' glyph loading within FreeType. This is used to support + * embedded fonts in certain environments (e.g., PostScript + * interpreters), where the glyph data isn't in the font file, or must be + * overridden by different values. + * + * @note: + * It is up to client applications to create and implement + * @FT_Incremental objects, as long as they provide implementations for + * the methods @FT_Incremental_GetGlyphDataFunc, + * @FT_Incremental_FreeGlyphDataFunc and + * @FT_Incremental_GetGlyphMetricsFunc. + * + * See the description of @FT_Incremental_InterfaceRec to understand how + * to use incremental objects with FreeType. + * + */ + typedef struct FT_IncrementalRec_* FT_Incremental; + + + /************************************************************************** + * + * @struct: + * FT_Incremental_MetricsRec + * + * @description: + * A small structure used to contain the basic glyph metrics returned by + * the @FT_Incremental_GetGlyphMetricsFunc method. + * + * @fields: + * bearing_x :: + * Left bearing, in font units. + * + * bearing_y :: + * Top bearing, in font units. + * + * advance :: + * Horizontal component of glyph advance, in font units. + * + * advance_v :: + * Vertical component of glyph advance, in font units. + * + * @note: + * These correspond to horizontal or vertical metrics depending on the + * value of the `vertical` argument to the function + * @FT_Incremental_GetGlyphMetricsFunc. + * + */ + typedef struct FT_Incremental_MetricsRec_ + { + FT_Long bearing_x; + FT_Long bearing_y; + FT_Long advance; + FT_Long advance_v; /* since 2.3.12 */ + + } FT_Incremental_MetricsRec; + + + /************************************************************************** + * + * @struct: + * FT_Incremental_Metrics + * + * @description: + * A handle to an @FT_Incremental_MetricsRec structure. + * + */ + typedef struct FT_Incremental_MetricsRec_* FT_Incremental_Metrics; + + + /************************************************************************** + * + * @type: + * FT_Incremental_GetGlyphDataFunc + * + * @description: + * A function called by FreeType to access a given glyph's data bytes + * during @FT_Load_Glyph or @FT_Load_Char if incremental loading is + * enabled. + * + * Note that the format of the glyph's data bytes depends on the font + * file format. For TrueType, it must correspond to the raw bytes within + * the 'glyf' table. For PostScript formats, it must correspond to the + * **unencrypted** charstring bytes, without any `lenIV` header. It is + * undefined for any other format. + * + * @input: + * incremental :: + * Handle to an opaque @FT_Incremental handle provided by the client + * application. + * + * glyph_index :: + * Index of relevant glyph. + * + * @output: + * adata :: + * A structure describing the returned glyph data bytes (which will be + * accessed as a read-only byte block). + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * If this function returns successfully the method + * @FT_Incremental_FreeGlyphDataFunc will be called later to release the + * data bytes. + * + * Nested calls to @FT_Incremental_GetGlyphDataFunc can happen for + * compound glyphs. + * + */ + typedef FT_Error + (*FT_Incremental_GetGlyphDataFunc)( FT_Incremental incremental, + FT_UInt glyph_index, + FT_Data* adata ); + + + /************************************************************************** + * + * @type: + * FT_Incremental_FreeGlyphDataFunc + * + * @description: + * A function used to release the glyph data bytes returned by a + * successful call to @FT_Incremental_GetGlyphDataFunc. + * + * @input: + * incremental :: + * A handle to an opaque @FT_Incremental handle provided by the client + * application. + * + * data :: + * A structure describing the glyph data bytes (which will be accessed + * as a read-only byte block). + * + */ + typedef void + (*FT_Incremental_FreeGlyphDataFunc)( FT_Incremental incremental, + FT_Data* data ); + + + /************************************************************************** + * + * @type: + * FT_Incremental_GetGlyphMetricsFunc + * + * @description: + * A function used to retrieve the basic metrics of a given glyph index + * before accessing its data. This allows for handling font types such + * as PCL~XL Format~1, Class~2 downloaded TrueType fonts, where the glyph + * metrics (`hmtx` and `vmtx` tables) are permitted to be omitted from + * the font, and the relevant metrics included in the header of the glyph + * outline data. Importantly, this is not intended to allow custom glyph + * metrics (for example, Postscript Metrics dictionaries), because that + * conflicts with the requirements of outline hinting. Such custom + * metrics must be handled separately, by the calling application. + * + * @input: + * incremental :: + * A handle to an opaque @FT_Incremental handle provided by the client + * application. + * + * glyph_index :: + * Index of relevant glyph. + * + * vertical :: + * If true, return vertical metrics. + * + * ametrics :: + * This parameter is used for both input and output. The original + * glyph metrics, if any, in font units. If metrics are not available + * all the values must be set to zero. + * + * @output: + * ametrics :: + * The glyph metrics in font units. + * + */ + typedef FT_Error + (*FT_Incremental_GetGlyphMetricsFunc) + ( FT_Incremental incremental, + FT_UInt glyph_index, + FT_Bool vertical, + FT_Incremental_MetricsRec *ametrics ); + + + /************************************************************************** + * + * @struct: + * FT_Incremental_FuncsRec + * + * @description: + * A table of functions for accessing fonts that load data incrementally. + * Used in @FT_Incremental_InterfaceRec. + * + * @fields: + * get_glyph_data :: + * The function to get glyph data. Must not be null. + * + * free_glyph_data :: + * The function to release glyph data. Must not be null. + * + * get_glyph_metrics :: + * The function to get glyph metrics. May be null if the font does not + * require it. + * + */ + typedef struct FT_Incremental_FuncsRec_ + { + FT_Incremental_GetGlyphDataFunc get_glyph_data; + FT_Incremental_FreeGlyphDataFunc free_glyph_data; + FT_Incremental_GetGlyphMetricsFunc get_glyph_metrics; + + } FT_Incremental_FuncsRec; + + + /************************************************************************** + * + * @struct: + * FT_Incremental_InterfaceRec + * + * @description: + * A structure to be used with @FT_Open_Face to indicate that the user + * wants to support incremental glyph loading. You should use it with + * @FT_PARAM_TAG_INCREMENTAL as in the following example: + * + * ``` + * FT_Incremental_InterfaceRec inc_int; + * FT_Parameter parameter; + * FT_Open_Args open_args; + * + * + * // set up incremental descriptor + * inc_int.funcs = my_funcs; + * inc_int.object = my_object; + * + * // set up optional parameter + * parameter.tag = FT_PARAM_TAG_INCREMENTAL; + * parameter.data = &inc_int; + * + * // set up FT_Open_Args structure + * open_args.flags = FT_OPEN_PATHNAME | FT_OPEN_PARAMS; + * open_args.pathname = my_font_pathname; + * open_args.num_params = 1; + * open_args.params = ¶meter; // we use one optional argument + * + * // open the font + * error = FT_Open_Face( library, &open_args, index, &face ); + * ... + * ``` + * + */ + typedef struct FT_Incremental_InterfaceRec_ + { + const FT_Incremental_FuncsRec* funcs; + FT_Incremental object; + + } FT_Incremental_InterfaceRec; + + + /************************************************************************** + * + * @type: + * FT_Incremental_Interface + * + * @description: + * A pointer to an @FT_Incremental_InterfaceRec structure. + * + */ + typedef FT_Incremental_InterfaceRec* FT_Incremental_Interface; + + + /* */ + + +FT_END_HEADER + +#endif /* FTINCREM_H_ */ + + +/* END */ diff --git a/dependencies/linux64/include/freetype2/freetype/ftlcdfil.h b/dependencies/linux64/include/freetype2/freetype/ftlcdfil.h new file mode 100644 index 0000000..25274dc --- /dev/null +++ b/dependencies/linux64/include/freetype2/freetype/ftlcdfil.h @@ -0,0 +1,323 @@ +/**************************************************************************** + * + * ftlcdfil.h + * + * FreeType API for color filtering of subpixel bitmap glyphs + * (specification). + * + * Copyright (C) 2006-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + +#ifndef FTLCDFIL_H_ +#define FTLCDFIL_H_ + +#include +#include + +#ifdef FREETYPE_H +#error "freetype.h of FreeType 1 has been loaded!" +#error "Please fix the directory search order for header files" +#error "so that freetype.h of FreeType 2 is found first." +#endif + + +FT_BEGIN_HEADER + + /************************************************************************** + * + * @section: + * lcd_rendering + * + * @title: + * Subpixel Rendering + * + * @abstract: + * API to control subpixel rendering. + * + * @description: + * FreeType provides two alternative subpixel rendering technologies. + * Should you define `FT_CONFIG_OPTION_SUBPIXEL_RENDERING` in your + * `ftoption.h` file, this enables ClearType-style rendering. + * Otherwise, Harmony LCD rendering is enabled. These technologies are + * controlled differently and API described below, although always + * available, performs its function when appropriate method is enabled + * and does nothing otherwise. + * + * ClearType-style LCD rendering exploits the color-striped structure of + * LCD pixels, increasing the available resolution in the direction of + * the stripe (usually horizontal RGB) by a factor of~3. Using the + * subpixel coverages unfiltered can create severe color fringes + * especially when rendering thin features. Indeed, to produce + * black-on-white text, the nearby color subpixels must be dimmed + * evenly. Therefore, an equalizing 5-tap FIR filter should be applied + * to subpixel coverages regardless of pixel boundaries and should have + * these properties: + * + * 1. It should be symmetrical, like {~a, b, c, b, a~}, to avoid + * any shifts in appearance. + * + * 2. It should be color-balanced, meaning a~+ b~=~c, to reduce color + * fringes by distributing the computed coverage for one subpixel to + * all subpixels equally. + * + * 3. It should be normalized, meaning 2a~+ 2b~+ c~=~1.0 to maintain + * overall brightness. + * + * Boxy 3-tap filter {0, 1/3, 1/3, 1/3, 0} is sharper but is less + * forgiving of non-ideal gamma curves of a screen (and viewing angles), + * beveled filters are fuzzier but more tolerant. + * + * Use the @FT_Library_SetLcdFilter or @FT_Library_SetLcdFilterWeights + * API to specify a low-pass filter, which is then applied to + * subpixel-rendered bitmaps generated through @FT_Render_Glyph. + * + * Harmony LCD rendering is suitable to panels with any regular subpixel + * structure, not just monitors with 3 color striped subpixels, as long + * as the color subpixels have fixed positions relative to the pixel + * center. In this case, each color channel can be rendered separately + * after shifting the outline opposite to the subpixel shift so that the + * coverage maps are aligned. This method is immune to color fringes + * because the shifts do not change integral coverage. + * + * The subpixel geometry must be specified by xy-coordinates for each + * subpixel. By convention they may come in the RGB order: {{-1/3, 0}, + * {0, 0}, {1/3, 0}} for standard RGB striped panel or {{-1/6, 1/4}, + * {-1/6, -1/4}, {1/3, 0}} for a certain PenTile panel. + * + * Use the @FT_Library_SetLcdGeometry API to specify subpixel positions. + * If one follows the RGB order convention, the same order applies to the + * resulting @FT_PIXEL_MODE_LCD and @FT_PIXEL_MODE_LCD_V bitmaps. Note, + * however, that the coordinate frame for the latter must be rotated + * clockwise. Harmony with default LCD geometry is equivalent to + * ClearType with light filter. + * + * As a result of ClearType filtering or Harmony shifts, the resulting + * dimensions of LCD bitmaps can be slightly wider or taller than the + * dimensions the original outline with regard to the pixel grid. + * For example, for @FT_RENDER_MODE_LCD, the filter adds 2~subpixels to + * the left, and 2~subpixels to the right. The bitmap offset values are + * adjusted accordingly, so clients shouldn't need to modify their layout + * and glyph positioning code when enabling the filter. + * + * The ClearType and Harmony rendering is applicable to glyph bitmaps + * rendered through @FT_Render_Glyph, @FT_Load_Glyph, @FT_Load_Char, and + * @FT_Glyph_To_Bitmap, when @FT_RENDER_MODE_LCD or @FT_RENDER_MODE_LCD_V + * is specified. This API does not control @FT_Outline_Render and + * @FT_Outline_Get_Bitmap. + * + * The described algorithms can completely remove color artefacts when + * combined with gamma-corrected alpha blending in linear space. Each of + * the 3~alpha values (subpixels) must by independently used to blend one + * color channel. That is, red alpha blends the red channel of the text + * color with the red channel of the background pixel. + */ + + + /************************************************************************** + * + * @enum: + * FT_LcdFilter + * + * @description: + * A list of values to identify various types of LCD filters. + * + * @values: + * FT_LCD_FILTER_NONE :: + * Do not perform filtering. When used with subpixel rendering, this + * results in sometimes severe color fringes. + * + * FT_LCD_FILTER_DEFAULT :: + * This is a beveled, normalized, and color-balanced five-tap filter + * with weights of [0x08 0x4D 0x56 0x4D 0x08] in 1/256 units. + * + * FT_LCD_FILTER_LIGHT :: + * this is a boxy, normalized, and color-balanced three-tap filter with + * weights of [0x00 0x55 0x56 0x55 0x00] in 1/256 units. + * + * FT_LCD_FILTER_LEGACY :: + * FT_LCD_FILTER_LEGACY1 :: + * This filter corresponds to the original libXft color filter. It + * provides high contrast output but can exhibit really bad color + * fringes if glyphs are not extremely well hinted to the pixel grid. + * This filter is only provided for comparison purposes, and might be + * disabled or stay unsupported in the future. The second value is + * provided for compatibility with FontConfig, which historically used + * different enumeration, sometimes incorrectly forwarded to FreeType. + * + * @since: + * 2.3.0 (`FT_LCD_FILTER_LEGACY1` since 2.6.2) + */ + typedef enum FT_LcdFilter_ + { + FT_LCD_FILTER_NONE = 0, + FT_LCD_FILTER_DEFAULT = 1, + FT_LCD_FILTER_LIGHT = 2, + FT_LCD_FILTER_LEGACY1 = 3, + FT_LCD_FILTER_LEGACY = 16, + + FT_LCD_FILTER_MAX /* do not remove */ + + } FT_LcdFilter; + + + /************************************************************************** + * + * @function: + * FT_Library_SetLcdFilter + * + * @description: + * This function is used to change filter applied to LCD decimated + * bitmaps, like the ones used when calling @FT_Render_Glyph with + * @FT_RENDER_MODE_LCD or @FT_RENDER_MODE_LCD_V. + * + * @input: + * library :: + * A handle to the target library instance. + * + * filter :: + * The filter type. + * + * You can use @FT_LCD_FILTER_NONE here to disable this feature, or + * @FT_LCD_FILTER_DEFAULT to use a default filter that should work well + * on most LCD screens. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * Since 2.10.3 the LCD filtering is enabled with @FT_LCD_FILTER_DEFAULT. + * It is no longer necessary to call this function explicitly except + * to choose a different filter or disable filtering altogether with + * @FT_LCD_FILTER_NONE. + * + * This function does nothing but returns `FT_Err_Unimplemented_Feature` + * if the configuration macro `FT_CONFIG_OPTION_SUBPIXEL_RENDERING` is + * not defined in your build of the library. + * + * @since: + * 2.3.0 + */ + FT_EXPORT( FT_Error ) + FT_Library_SetLcdFilter( FT_Library library, + FT_LcdFilter filter ); + + + /************************************************************************** + * + * @function: + * FT_Library_SetLcdFilterWeights + * + * @description: + * This function can be used to enable LCD filter with custom weights, + * instead of using presets in @FT_Library_SetLcdFilter. + * + * @input: + * library :: + * A handle to the target library instance. + * + * weights :: + * A pointer to an array; the function copies the first five bytes and + * uses them to specify the filter weights in 1/256 units. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * This function does nothing but returns `FT_Err_Unimplemented_Feature` + * if the configuration macro `FT_CONFIG_OPTION_SUBPIXEL_RENDERING` is + * not defined in your build of the library. + * + * LCD filter weights can also be set per face using @FT_Face_Properties + * with @FT_PARAM_TAG_LCD_FILTER_WEIGHTS. + * + * @since: + * 2.4.0 + */ + FT_EXPORT( FT_Error ) + FT_Library_SetLcdFilterWeights( FT_Library library, + unsigned char *weights ); + + + /************************************************************************** + * + * @type: + * FT_LcdFiveTapFilter + * + * @description: + * A typedef for passing the five LCD filter weights to + * @FT_Face_Properties within an @FT_Parameter structure. + * + * @since: + * 2.8 + * + */ +#define FT_LCD_FILTER_FIVE_TAPS 5 + + typedef FT_Byte FT_LcdFiveTapFilter[FT_LCD_FILTER_FIVE_TAPS]; + + + /************************************************************************** + * + * @function: + * FT_Library_SetLcdGeometry + * + * @description: + * This function can be used to modify default positions of color + * subpixels, which controls Harmony LCD rendering. + * + * @input: + * library :: + * A handle to the target library instance. + * + * sub :: + * A pointer to an array of 3 vectors in 26.6 fractional pixel format; + * the function modifies the default values, see the note below. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * Subpixel geometry examples: + * + * - {{-21, 0}, {0, 0}, {21, 0}} is the default, corresponding to 3 color + * stripes shifted by a third of a pixel. This could be an RGB panel. + * + * - {{21, 0}, {0, 0}, {-21, 0}} looks the same as the default but can + * specify a BGR panel instead, while keeping the bitmap in the same + * RGB888 format. + * + * - {{0, 21}, {0, 0}, {0, -21}} is the vertical RGB, but the bitmap + * stays RGB888 as a result. + * + * - {{-11, 16}, {-11, -16}, {22, 0}} is a certain PenTile arrangement. + * + * This function does nothing and returns `FT_Err_Unimplemented_Feature` + * in the context of ClearType-style subpixel rendering when + * `FT_CONFIG_OPTION_SUBPIXEL_RENDERING` is defined in your build of the + * library. + * + * @since: + * 2.10.0 + */ + FT_EXPORT( FT_Error ) + FT_Library_SetLcdGeometry( FT_Library library, + FT_Vector sub[3] ); + + /* */ + + +FT_END_HEADER + +#endif /* FTLCDFIL_H_ */ + + +/* END */ diff --git a/dependencies/linux64/include/freetype2/freetype/ftlist.h b/dependencies/linux64/include/freetype2/freetype/ftlist.h new file mode 100644 index 0000000..972fbfa --- /dev/null +++ b/dependencies/linux64/include/freetype2/freetype/ftlist.h @@ -0,0 +1,296 @@ +/**************************************************************************** + * + * ftlist.h + * + * Generic list support for FreeType (specification). + * + * Copyright (C) 1996-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + + /************************************************************************** + * + * This file implements functions relative to list processing. Its data + * structures are defined in `freetype.h`. + * + */ + + +#ifndef FTLIST_H_ +#define FTLIST_H_ + + +#include + +#ifdef FREETYPE_H +#error "freetype.h of FreeType 1 has been loaded!" +#error "Please fix the directory search order for header files" +#error "so that freetype.h of FreeType 2 is found first." +#endif + + +FT_BEGIN_HEADER + + + /************************************************************************** + * + * @section: + * list_processing + * + * @title: + * List Processing + * + * @abstract: + * Simple management of lists. + * + * @description: + * This section contains various definitions related to list processing + * using doubly-linked nodes. + * + * @order: + * FT_List + * FT_ListNode + * FT_ListRec + * FT_ListNodeRec + * + * FT_List_Add + * FT_List_Insert + * FT_List_Find + * FT_List_Remove + * FT_List_Up + * FT_List_Iterate + * FT_List_Iterator + * FT_List_Finalize + * FT_List_Destructor + * + */ + + + /************************************************************************** + * + * @function: + * FT_List_Find + * + * @description: + * Find the list node for a given listed object. + * + * @input: + * list :: + * A pointer to the parent list. + * data :: + * The address of the listed object. + * + * @return: + * List node. `NULL` if it wasn't found. + */ + FT_EXPORT( FT_ListNode ) + FT_List_Find( FT_List list, + void* data ); + + + /************************************************************************** + * + * @function: + * FT_List_Add + * + * @description: + * Append an element to the end of a list. + * + * @inout: + * list :: + * A pointer to the parent list. + * node :: + * The node to append. + */ + FT_EXPORT( void ) + FT_List_Add( FT_List list, + FT_ListNode node ); + + + /************************************************************************** + * + * @function: + * FT_List_Insert + * + * @description: + * Insert an element at the head of a list. + * + * @inout: + * list :: + * A pointer to parent list. + * node :: + * The node to insert. + */ + FT_EXPORT( void ) + FT_List_Insert( FT_List list, + FT_ListNode node ); + + + /************************************************************************** + * + * @function: + * FT_List_Remove + * + * @description: + * Remove a node from a list. This function doesn't check whether the + * node is in the list! + * + * @input: + * node :: + * The node to remove. + * + * @inout: + * list :: + * A pointer to the parent list. + */ + FT_EXPORT( void ) + FT_List_Remove( FT_List list, + FT_ListNode node ); + + + /************************************************************************** + * + * @function: + * FT_List_Up + * + * @description: + * Move a node to the head/top of a list. Used to maintain LRU lists. + * + * @inout: + * list :: + * A pointer to the parent list. + * node :: + * The node to move. + */ + FT_EXPORT( void ) + FT_List_Up( FT_List list, + FT_ListNode node ); + + + /************************************************************************** + * + * @functype: + * FT_List_Iterator + * + * @description: + * An FT_List iterator function that is called during a list parse by + * @FT_List_Iterate. + * + * @input: + * node :: + * The current iteration list node. + * + * user :: + * A typeless pointer passed to @FT_List_Iterate. Can be used to point + * to the iteration's state. + */ + typedef FT_Error + (*FT_List_Iterator)( FT_ListNode node, + void* user ); + + + /************************************************************************** + * + * @function: + * FT_List_Iterate + * + * @description: + * Parse a list and calls a given iterator function on each element. + * Note that parsing is stopped as soon as one of the iterator calls + * returns a non-zero value. + * + * @input: + * list :: + * A handle to the list. + * iterator :: + * An iterator function, called on each node of the list. + * user :: + * A user-supplied field that is passed as the second argument to the + * iterator. + * + * @return: + * The result (a FreeType error code) of the last iterator call. + */ + FT_EXPORT( FT_Error ) + FT_List_Iterate( FT_List list, + FT_List_Iterator iterator, + void* user ); + + + /************************************************************************** + * + * @functype: + * FT_List_Destructor + * + * @description: + * An @FT_List iterator function that is called during a list + * finalization by @FT_List_Finalize to destroy all elements in a given + * list. + * + * @input: + * system :: + * The current system object. + * + * data :: + * The current object to destroy. + * + * user :: + * A typeless pointer passed to @FT_List_Iterate. It can be used to + * point to the iteration's state. + */ + typedef void + (*FT_List_Destructor)( FT_Memory memory, + void* data, + void* user ); + + + /************************************************************************** + * + * @function: + * FT_List_Finalize + * + * @description: + * Destroy all elements in the list as well as the list itself. + * + * @input: + * list :: + * A handle to the list. + * + * destroy :: + * A list destructor that will be applied to each element of the list. + * Set this to `NULL` if not needed. + * + * memory :: + * The current memory object that handles deallocation. + * + * user :: + * A user-supplied field that is passed as the last argument to the + * destructor. + * + * @note: + * This function expects that all nodes added by @FT_List_Add or + * @FT_List_Insert have been dynamically allocated. + */ + FT_EXPORT( void ) + FT_List_Finalize( FT_List list, + FT_List_Destructor destroy, + FT_Memory memory, + void* user ); + + /* */ + + +FT_END_HEADER + +#endif /* FTLIST_H_ */ + + +/* END */ diff --git a/dependencies/linux64/include/freetype2/freetype/ftlogging.h b/dependencies/linux64/include/freetype2/freetype/ftlogging.h new file mode 100644 index 0000000..1813cfc --- /dev/null +++ b/dependencies/linux64/include/freetype2/freetype/ftlogging.h @@ -0,0 +1,184 @@ +/**************************************************************************** + * + * ftlogging.h + * + * Additional debugging APIs. + * + * Copyright (C) 2020-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + +#ifndef FTLOGGING_H_ +#define FTLOGGING_H_ + + +#include +#include FT_CONFIG_CONFIG_H + + +FT_BEGIN_HEADER + + + /************************************************************************** + * + * @section: + * debugging_apis + * + * @title: + * External Debugging APIs + * + * @abstract: + * Public APIs to control the `FT_DEBUG_LOGGING` macro. + * + * @description: + * This section contains the declarations of public functions that + * enables fine control of what the `FT_DEBUG_LOGGING` macro outputs. + * + */ + + + /************************************************************************** + * + * @function: + * FT_Trace_Set_Level + * + * @description: + * Change the levels of tracing components of FreeType at run time. + * + * @input: + * tracing_level :: + * New tracing value. + * + * @example: + * The following call makes FreeType trace everything but the 'memory' + * component. + * + * ``` + * FT_Trace_Set_Level( "any:7 memory:0" ); + * ``` + * + * @note: + * This function does nothing if compilation option `FT_DEBUG_LOGGING` + * isn't set. + * + * @since: + * 2.11 + * + */ + FT_EXPORT( void ) + FT_Trace_Set_Level( const char* tracing_level ); + + + /************************************************************************** + * + * @function: + * FT_Trace_Set_Default_Level + * + * @description: + * Reset tracing value of FreeType's components to the default value + * (i.e., to the value of the `FT2_DEBUG` environment value or to NULL + * if `FT2_DEBUG` is not set). + * + * @note: + * This function does nothing if compilation option `FT_DEBUG_LOGGING` + * isn't set. + * + * @since: + * 2.11 + * + */ + FT_EXPORT( void ) + FT_Trace_Set_Default_Level( void ); + + + /************************************************************************** + * + * @functype: + * FT_Custom_Log_Handler + * + * @description: + * A function typedef that is used to handle the logging of tracing and + * debug messages on a file system. + * + * @input: + * ft_component :: + * The name of `FT_COMPONENT` from which the current debug or error + * message is produced. + * + * fmt :: + * Actual debug or tracing message. + * + * args:: + * Arguments of debug or tracing messages. + * + * @since: + * 2.11 + * + */ + typedef void + (*FT_Custom_Log_Handler)( const char* ft_component, + const char* fmt, + va_list args ); + + + /************************************************************************** + * + * @function: + * FT_Set_Log_Handler + * + * @description: + * A function to set a custom log handler. + * + * @input: + * handler :: + * New logging function. + * + * @note: + * This function does nothing if compilation option `FT_DEBUG_LOGGING` + * isn't set. + * + * @since: + * 2.11 + * + */ + FT_EXPORT( void ) + FT_Set_Log_Handler( FT_Custom_Log_Handler handler ); + + + /************************************************************************** + * + * @function: + * FT_Set_Default_Log_Handler + * + * @description: + * A function to undo the effect of @FT_Set_Log_Handler, resetting the + * log handler to FreeType's built-in version. + * + * @note: + * This function does nothing if compilation option `FT_DEBUG_LOGGING` + * isn't set. + * + * @since: + * 2.11 + * + */ + FT_EXPORT( void ) + FT_Set_Default_Log_Handler( void ); + + /* */ + + +FT_END_HEADER + +#endif /* FTLOGGING_H_ */ + + +/* END */ diff --git a/dependencies/linux64/include/freetype2/freetype/ftlzw.h b/dependencies/linux64/include/freetype2/freetype/ftlzw.h new file mode 100644 index 0000000..bcf59ba --- /dev/null +++ b/dependencies/linux64/include/freetype2/freetype/ftlzw.h @@ -0,0 +1,100 @@ +/**************************************************************************** + * + * ftlzw.h + * + * LZW-compressed stream support. + * + * Copyright (C) 2004-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + +#ifndef FTLZW_H_ +#define FTLZW_H_ + +#include + +#ifdef FREETYPE_H +#error "freetype.h of FreeType 1 has been loaded!" +#error "Please fix the directory search order for header files" +#error "so that freetype.h of FreeType 2 is found first." +#endif + + +FT_BEGIN_HEADER + + /************************************************************************** + * + * @section: + * lzw + * + * @title: + * LZW Streams + * + * @abstract: + * Using LZW-compressed font files. + * + * @description: + * In certain builds of the library, LZW compression recognition is + * automatically handled when calling @FT_New_Face or @FT_Open_Face. + * This means that if no font driver is capable of handling the raw + * compressed file, the library will try to open a LZW stream from it and + * re-open the face with it. + * + * The stream implementation is very basic and resets the decompression + * process each time seeking backwards is needed within the stream, + * which significantly undermines the performance. + * + * This section contains the declaration of LZW-specific functions. + * + */ + + /************************************************************************** + * + * @function: + * FT_Stream_OpenLZW + * + * @description: + * Open a new stream to parse LZW-compressed font files. This is mainly + * used to support the compressed `*.pcf.Z` fonts that come with XFree86. + * + * @input: + * stream :: + * The target embedding stream. + * + * source :: + * The source stream. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * The source stream must be opened _before_ calling this function. + * + * Calling the internal function `FT_Stream_Close` on the new stream will + * **not** call `FT_Stream_Close` on the source stream. None of the + * stream objects will be released to the heap. + * + * This function may return `FT_Err_Unimplemented_Feature` if your build + * of FreeType was not compiled with LZW support. + */ + FT_EXPORT( FT_Error ) + FT_Stream_OpenLZW( FT_Stream stream, + FT_Stream source ); + + /* */ + + +FT_END_HEADER + +#endif /* FTLZW_H_ */ + + +/* END */ diff --git a/dependencies/linux64/include/freetype2/freetype/ftmac.h b/dependencies/linux64/include/freetype2/freetype/ftmac.h new file mode 100644 index 0000000..e4efde3 --- /dev/null +++ b/dependencies/linux64/include/freetype2/freetype/ftmac.h @@ -0,0 +1,289 @@ +/**************************************************************************** + * + * ftmac.h + * + * Additional Mac-specific API. + * + * Copyright (C) 1996-2024 by + * Just van Rossum, David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + +/**************************************************************************** + * + * NOTE: Include this file after `FT_FREETYPE_H` and after any + * Mac-specific headers (because this header uses Mac types such as + * 'Handle', 'FSSpec', 'FSRef', etc.) + * + */ + + +#ifndef FTMAC_H_ +#define FTMAC_H_ + + + + +FT_BEGIN_HEADER + + + /* gcc-3.1 and later can warn about functions tagged as deprecated */ +#ifndef FT_DEPRECATED_ATTRIBUTE +#if defined( __GNUC__ ) && \ + ( ( __GNUC__ >= 4 ) || \ + ( ( __GNUC__ == 3 ) && ( __GNUC_MINOR__ >= 1 ) ) ) +#define FT_DEPRECATED_ATTRIBUTE __attribute__(( deprecated )) +#else +#define FT_DEPRECATED_ATTRIBUTE +#endif +#endif + + + /************************************************************************** + * + * @section: + * mac_specific + * + * @title: + * Mac Specific Interface + * + * @abstract: + * Only available on the Macintosh. + * + * @description: + * The following definitions are only available if FreeType is compiled + * on a Macintosh. + * + */ + + + /************************************************************************** + * + * @function: + * FT_New_Face_From_FOND + * + * @description: + * Create a new face object from a FOND resource. + * + * @inout: + * library :: + * A handle to the library resource. + * + * @input: + * fond :: + * A FOND resource. + * + * face_index :: + * Only supported for the -1 'sanity check' special case. + * + * @output: + * aface :: + * A handle to a new face object. + * + * @return: + * FreeType error code. 0~means success. + * + * @example: + * This function can be used to create @FT_Face objects from fonts that + * are installed in the system as follows. + * + * ``` + * fond = GetResource( 'FOND', fontName ); + * error = FT_New_Face_From_FOND( library, fond, 0, &face ); + * ``` + */ + FT_EXPORT( FT_Error ) + FT_New_Face_From_FOND( FT_Library library, + Handle fond, + FT_Long face_index, + FT_Face *aface ) + FT_DEPRECATED_ATTRIBUTE; + + + /************************************************************************** + * + * @function: + * FT_GetFile_From_Mac_Name + * + * @description: + * Return an FSSpec for the disk file containing the named font. + * + * @input: + * fontName :: + * Mac OS name of the font (e.g., Times New Roman Bold). + * + * @output: + * pathSpec :: + * FSSpec to the file. For passing to @FT_New_Face_From_FSSpec. + * + * face_index :: + * Index of the face. For passing to @FT_New_Face_From_FSSpec. + * + * @return: + * FreeType error code. 0~means success. + */ + FT_EXPORT( FT_Error ) + FT_GetFile_From_Mac_Name( const char* fontName, + FSSpec* pathSpec, + FT_Long* face_index ) + FT_DEPRECATED_ATTRIBUTE; + + + /************************************************************************** + * + * @function: + * FT_GetFile_From_Mac_ATS_Name + * + * @description: + * Return an FSSpec for the disk file containing the named font. + * + * @input: + * fontName :: + * Mac OS name of the font in ATS framework. + * + * @output: + * pathSpec :: + * FSSpec to the file. For passing to @FT_New_Face_From_FSSpec. + * + * face_index :: + * Index of the face. For passing to @FT_New_Face_From_FSSpec. + * + * @return: + * FreeType error code. 0~means success. + */ + FT_EXPORT( FT_Error ) + FT_GetFile_From_Mac_ATS_Name( const char* fontName, + FSSpec* pathSpec, + FT_Long* face_index ) + FT_DEPRECATED_ATTRIBUTE; + + + /************************************************************************** + * + * @function: + * FT_GetFilePath_From_Mac_ATS_Name + * + * @description: + * Return a pathname of the disk file and face index for given font name + * that is handled by ATS framework. + * + * @input: + * fontName :: + * Mac OS name of the font in ATS framework. + * + * @output: + * path :: + * Buffer to store pathname of the file. For passing to @FT_New_Face. + * The client must allocate this buffer before calling this function. + * + * maxPathSize :: + * Lengths of the buffer `path` that client allocated. + * + * face_index :: + * Index of the face. For passing to @FT_New_Face. + * + * @return: + * FreeType error code. 0~means success. + */ + FT_EXPORT( FT_Error ) + FT_GetFilePath_From_Mac_ATS_Name( const char* fontName, + UInt8* path, + UInt32 maxPathSize, + FT_Long* face_index ) + FT_DEPRECATED_ATTRIBUTE; + + + /************************************************************************** + * + * @function: + * FT_New_Face_From_FSSpec + * + * @description: + * Create a new face object from a given resource and typeface index + * using an FSSpec to the font file. + * + * @inout: + * library :: + * A handle to the library resource. + * + * @input: + * spec :: + * FSSpec to the font file. + * + * face_index :: + * The index of the face within the resource. The first face has + * index~0. + * @output: + * aface :: + * A handle to a new face object. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * @FT_New_Face_From_FSSpec is identical to @FT_New_Face except it + * accepts an FSSpec instead of a path. + */ + FT_EXPORT( FT_Error ) + FT_New_Face_From_FSSpec( FT_Library library, + const FSSpec *spec, + FT_Long face_index, + FT_Face *aface ) + FT_DEPRECATED_ATTRIBUTE; + + + /************************************************************************** + * + * @function: + * FT_New_Face_From_FSRef + * + * @description: + * Create a new face object from a given resource and typeface index + * using an FSRef to the font file. + * + * @inout: + * library :: + * A handle to the library resource. + * + * @input: + * spec :: + * FSRef to the font file. + * + * face_index :: + * The index of the face within the resource. The first face has + * index~0. + * @output: + * aface :: + * A handle to a new face object. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * @FT_New_Face_From_FSRef is identical to @FT_New_Face except it accepts + * an FSRef instead of a path. + */ + FT_EXPORT( FT_Error ) + FT_New_Face_From_FSRef( FT_Library library, + const FSRef *ref, + FT_Long face_index, + FT_Face *aface ) + FT_DEPRECATED_ATTRIBUTE; + + /* */ + + +FT_END_HEADER + + +#endif /* FTMAC_H_ */ + + +/* END */ diff --git a/dependencies/linux64/include/freetype2/freetype/ftmm.h b/dependencies/linux64/include/freetype2/freetype/ftmm.h new file mode 100644 index 0000000..9a4dab5 --- /dev/null +++ b/dependencies/linux64/include/freetype2/freetype/ftmm.h @@ -0,0 +1,846 @@ +/**************************************************************************** + * + * ftmm.h + * + * FreeType Multiple Master font interface (specification). + * + * Copyright (C) 1996-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + +#ifndef FTMM_H_ +#define FTMM_H_ + +#include + +#ifdef FREETYPE_H +#error "freetype.h of FreeType 1 has been loaded!" +#error "Please fix the directory search order for header files" +#error "so that freetype.h of FreeType 2 is found first." +#endif + + +FT_BEGIN_HEADER + + + /************************************************************************** + * + * @section: + * multiple_masters + * + * @title: + * Multiple Masters + * + * @abstract: + * How to manage Multiple Masters fonts. + * + * @description: + * The following types and functions are used to manage Multiple Master + * fonts, i.e., the selection of specific design instances by setting + * design axis coordinates. + * + * Besides Adobe MM fonts, the interface supports Apple's TrueType GX and + * OpenType variation fonts. Some of the routines only work with Adobe + * MM fonts, others will work with all three types. They are similar + * enough that a consistent interface makes sense. + * + * For Adobe MM fonts, macro @FT_IS_SFNT returns false. For GX and + * OpenType variation fonts, it returns true. + * + */ + + + /************************************************************************** + * + * @enum: + * T1_MAX_MM_XXX + * + * @description: + * Multiple Masters limits as defined in their specifications. + * + * @values: + * T1_MAX_MM_AXIS :: + * The maximum number of Multiple Masters axes. + * + * T1_MAX_MM_DESIGNS :: + * The maximum number of Multiple Masters designs. + * + * T1_MAX_MM_MAP_POINTS :: + * The maximum number of elements in a design map. + * + */ +#define T1_MAX_MM_AXIS 4 +#define T1_MAX_MM_DESIGNS 16 +#define T1_MAX_MM_MAP_POINTS 20 + + + /************************************************************************** + * + * @struct: + * FT_MM_Axis + * + * @description: + * A structure to model a given axis in design space for Multiple Masters + * fonts. + * + * This structure can't be used for TrueType GX or OpenType variation + * fonts. + * + * @fields: + * name :: + * The axis's name. + * + * minimum :: + * The axis's minimum design coordinate. + * + * maximum :: + * The axis's maximum design coordinate. + */ + typedef struct FT_MM_Axis_ + { + FT_String* name; + FT_Long minimum; + FT_Long maximum; + + } FT_MM_Axis; + + + /************************************************************************** + * + * @struct: + * FT_Multi_Master + * + * @description: + * A structure to model the axes and space of a Multiple Masters font. + * + * This structure can't be used for TrueType GX or OpenType variation + * fonts. + * + * @fields: + * num_axis :: + * Number of axes. Cannot exceed~4. + * + * num_designs :: + * Number of designs; should be normally 2^num_axis even though the + * Type~1 specification strangely allows for intermediate designs to be + * present. This number cannot exceed~16. + * + * axis :: + * A table of axis descriptors. + */ + typedef struct FT_Multi_Master_ + { + FT_UInt num_axis; + FT_UInt num_designs; + FT_MM_Axis axis[T1_MAX_MM_AXIS]; + + } FT_Multi_Master; + + + /************************************************************************** + * + * @struct: + * FT_Var_Axis + * + * @description: + * A structure to model a given axis in design space for Multiple + * Masters, TrueType GX, and OpenType variation fonts. + * + * @fields: + * name :: + * The axis's name. Not always meaningful for TrueType GX or OpenType + * variation fonts. + * + * minimum :: + * The axis's minimum design coordinate. + * + * def :: + * The axis's default design coordinate. FreeType computes meaningful + * default values for Adobe MM fonts. + * + * maximum :: + * The axis's maximum design coordinate. + * + * tag :: + * The axis's tag (the equivalent to 'name' for TrueType GX and + * OpenType variation fonts). FreeType provides default values for + * Adobe MM fonts if possible. + * + * strid :: + * The axis name entry in the font's 'name' table. This is another + * (and often better) version of the 'name' field for TrueType GX or + * OpenType variation fonts. Not meaningful for Adobe MM fonts. + * + * @note: + * The fields `minimum`, `def`, and `maximum` are 16.16 fractional values + * for TrueType GX and OpenType variation fonts. For Adobe MM fonts, the + * values are whole numbers (i.e., the fractional part is zero). + */ + typedef struct FT_Var_Axis_ + { + FT_String* name; + + FT_Fixed minimum; + FT_Fixed def; + FT_Fixed maximum; + + FT_ULong tag; + FT_UInt strid; + + } FT_Var_Axis; + + + /************************************************************************** + * + * @struct: + * FT_Var_Named_Style + * + * @description: + * A structure to model a named instance in a TrueType GX or OpenType + * variation font. + * + * This structure can't be used for Adobe MM fonts. + * + * @fields: + * coords :: + * The design coordinates for this instance. This is an array with one + * entry for each axis. + * + * strid :: + * The entry in 'name' table identifying this instance. + * + * psid :: + * The entry in 'name' table identifying a PostScript name for this + * instance. Value 0xFFFF indicates a missing entry. + */ + typedef struct FT_Var_Named_Style_ + { + FT_Fixed* coords; + FT_UInt strid; + FT_UInt psid; /* since 2.7.1 */ + + } FT_Var_Named_Style; + + + /************************************************************************** + * + * @struct: + * FT_MM_Var + * + * @description: + * A structure to model the axes and space of an Adobe MM, TrueType GX, + * or OpenType variation font. + * + * Some fields are specific to one format and not to the others. + * + * @fields: + * num_axis :: + * The number of axes. The maximum value is~4 for Adobe MM fonts; no + * limit in TrueType GX or OpenType variation fonts. + * + * num_designs :: + * The number of designs; should be normally 2^num_axis for Adobe MM + * fonts. Not meaningful for TrueType GX or OpenType variation fonts + * (where every glyph could have a different number of designs). + * + * num_namedstyles :: + * The number of named styles; a 'named style' is a tuple of design + * coordinates that has a string ID (in the 'name' table) associated + * with it. The font can tell the user that, for example, + * [Weight=1.5,Width=1.1] is 'Bold'. Another name for 'named style' is + * 'named instance'. + * + * For Adobe Multiple Masters fonts, this value is always zero because + * the format does not support named styles. + * + * axis :: + * An axis descriptor table. TrueType GX and OpenType variation fonts + * contain slightly more data than Adobe MM fonts. Memory management + * of this pointer is done internally by FreeType. + * + * namedstyle :: + * A named style (instance) table. Only meaningful for TrueType GX and + * OpenType variation fonts. Memory management of this pointer is done + * internally by FreeType. + */ + typedef struct FT_MM_Var_ + { + FT_UInt num_axis; + FT_UInt num_designs; + FT_UInt num_namedstyles; + FT_Var_Axis* axis; + FT_Var_Named_Style* namedstyle; + + } FT_MM_Var; + + + /************************************************************************** + * + * @function: + * FT_Get_Multi_Master + * + * @description: + * Retrieve a variation descriptor of a given Adobe MM font. + * + * This function can't be used with TrueType GX or OpenType variation + * fonts. + * + * @input: + * face :: + * A handle to the source face. + * + * @output: + * amaster :: + * The Multiple Masters descriptor. + * + * @return: + * FreeType error code. 0~means success. + */ + FT_EXPORT( FT_Error ) + FT_Get_Multi_Master( FT_Face face, + FT_Multi_Master *amaster ); + + + /************************************************************************** + * + * @function: + * FT_Get_MM_Var + * + * @description: + * Retrieve a variation descriptor for a given font. + * + * This function works with all supported variation formats. + * + * @input: + * face :: + * A handle to the source face. + * + * @output: + * amaster :: + * The variation descriptor. Allocates a data structure, which the + * user must deallocate with a call to @FT_Done_MM_Var after use. + * + * @return: + * FreeType error code. 0~means success. + */ + FT_EXPORT( FT_Error ) + FT_Get_MM_Var( FT_Face face, + FT_MM_Var* *amaster ); + + + /************************************************************************** + * + * @function: + * FT_Done_MM_Var + * + * @description: + * Free the memory allocated by @FT_Get_MM_Var. + * + * @input: + * library :: + * A handle of the face's parent library object that was used in the + * call to @FT_Get_MM_Var to create `amaster`. + * + * @return: + * FreeType error code. 0~means success. + */ + FT_EXPORT( FT_Error ) + FT_Done_MM_Var( FT_Library library, + FT_MM_Var *amaster ); + + + /************************************************************************** + * + * @function: + * FT_Set_MM_Design_Coordinates + * + * @description: + * For Adobe MM fonts, choose an interpolated font design through design + * coordinates. + * + * This function can't be used with TrueType GX or OpenType variation + * fonts. + * + * @inout: + * face :: + * A handle to the source face. + * + * @input: + * num_coords :: + * The number of available design coordinates. If it is larger than + * the number of axes, ignore the excess values. If it is smaller than + * the number of axes, use default values for the remaining axes. + * + * coords :: + * An array of design coordinates. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * [Since 2.8.1] To reset all axes to the default values, call the + * function with `num_coords` set to zero and `coords` set to `NULL`. + * + * [Since 2.9] If `num_coords` is larger than zero, this function sets + * the @FT_FACE_FLAG_VARIATION bit in @FT_Face's `face_flags` field + * (i.e., @FT_IS_VARIATION will return true). If `num_coords` is zero, + * this bit flag gets unset. + */ + FT_EXPORT( FT_Error ) + FT_Set_MM_Design_Coordinates( FT_Face face, + FT_UInt num_coords, + FT_Long* coords ); + + + /************************************************************************** + * + * @function: + * FT_Set_Var_Design_Coordinates + * + * @description: + * Choose an interpolated font design through design coordinates. + * + * This function works with all supported variation formats. + * + * @inout: + * face :: + * A handle to the source face. + * + * @input: + * num_coords :: + * The number of available design coordinates. If it is larger than + * the number of axes, ignore the excess values. If it is smaller than + * the number of axes, use default values for the remaining axes. + * + * coords :: + * An array of design coordinates. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * The design coordinates are 16.16 fractional values for TrueType GX and + * OpenType variation fonts. For Adobe MM fonts, the values are supposed + * to be whole numbers (i.e., the fractional part is zero). + * + * [Since 2.8.1] To reset all axes to the default values, call the + * function with `num_coords` set to zero and `coords` set to `NULL`. + * [Since 2.9] 'Default values' means the currently selected named + * instance (or the base font if no named instance is selected). + * + * [Since 2.9] If `num_coords` is larger than zero, this function sets + * the @FT_FACE_FLAG_VARIATION bit in @FT_Face's `face_flags` field + * (i.e., @FT_IS_VARIATION will return true). If `num_coords` is zero, + * this bit flag gets unset. + * + * [Since 2.14] This function also sets the @FT_FACE_FLAG_VARIATION bit + * in @FT_Face's `face_flags` field (i.e., @FT_IS_VARIATION will return + * true) if any of the provided coordinates is different from the face's + * default value for the corresponding axis, that is, the set up face is + * not at its default position. + */ + FT_EXPORT( FT_Error ) + FT_Set_Var_Design_Coordinates( FT_Face face, + FT_UInt num_coords, + FT_Fixed* coords ); + + + /************************************************************************** + * + * @function: + * FT_Get_Var_Design_Coordinates + * + * @description: + * Get the design coordinates of the currently selected interpolated + * font. + * + * This function works with all supported variation formats. + * + * @input: + * face :: + * A handle to the source face. + * + * num_coords :: + * The number of design coordinates to retrieve. If it is larger than + * the number of axes, set the excess values to~0. + * + * @output: + * coords :: + * The design coordinates array. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * The design coordinates are 16.16 fractional values for TrueType GX and + * OpenType variation fonts. For Adobe MM fonts, the values are whole + * numbers (i.e., the fractional part is zero). + * + * @since: + * 2.7.1 + */ + FT_EXPORT( FT_Error ) + FT_Get_Var_Design_Coordinates( FT_Face face, + FT_UInt num_coords, + FT_Fixed* coords ); + + + /************************************************************************** + * + * @function: + * FT_Set_MM_Blend_Coordinates + * + * @description: + * Choose an interpolated font design through normalized blend + * coordinates. + * + * This function works with all supported variation formats. + * + * @inout: + * face :: + * A handle to the source face. + * + * @input: + * num_coords :: + * The number of available design coordinates. If it is larger than + * the number of axes, ignore the excess values. If it is smaller than + * the number of axes, use default values for the remaining axes. + * + * coords :: + * The design coordinates array. Each element is a 16.16 fractional + * value and must be between 0 and 1.0 for Adobe MM fonts, and between + * -1.0 and 1.0 for TrueType GX and OpenType variation fonts. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * [Since 2.8.1] To reset all axes to the default values, call the + * function with `num_coords` set to zero and `coords` set to `NULL`. + * [Since 2.9] 'Default values' means the currently selected named + * instance (or the base font if no named instance is selected). + * + * [Since 2.9] If `num_coords` is larger than zero, this function sets + * the @FT_FACE_FLAG_VARIATION bit in @FT_Face's `face_flags` field + * (i.e., @FT_IS_VARIATION will return true). If `num_coords` is zero, + * this bit flag gets unset. + * + * [Since 2.14] This function also sets the @FT_FACE_FLAG_VARIATION bit + * in @FT_Face's `face_flags` field (i.e., @FT_IS_VARIATION will return + * true) if any of the provided coordinates is different from the face's + * default value for the corresponding axis, that is, the set up face is + * not at its default position. + */ + FT_EXPORT( FT_Error ) + FT_Set_MM_Blend_Coordinates( FT_Face face, + FT_UInt num_coords, + FT_Fixed* coords ); + + + /************************************************************************** + * + * @function: + * FT_Get_MM_Blend_Coordinates + * + * @description: + * Get the normalized blend coordinates of the currently selected + * interpolated font. + * + * This function works with all supported variation formats. + * + * @input: + * face :: + * A handle to the source face. + * + * num_coords :: + * The number of normalized blend coordinates to retrieve. If it is + * larger than the number of axes, set the excess values to~0.5 for + * Adobe MM fonts, and to~0 for TrueType GX and OpenType variation + * fonts. + * + * @output: + * coords :: + * The normalized blend coordinates array (as 16.16 fractional values). + * + * @return: + * FreeType error code. 0~means success. + * + * @since: + * 2.7.1 + */ + FT_EXPORT( FT_Error ) + FT_Get_MM_Blend_Coordinates( FT_Face face, + FT_UInt num_coords, + FT_Fixed* coords ); + + + /************************************************************************** + * + * @function: + * FT_Set_Var_Blend_Coordinates + * + * @description: + * This is another name of @FT_Set_MM_Blend_Coordinates. + */ + FT_EXPORT( FT_Error ) + FT_Set_Var_Blend_Coordinates( FT_Face face, + FT_UInt num_coords, + FT_Fixed* coords ); + + + /************************************************************************** + * + * @function: + * FT_Get_Var_Blend_Coordinates + * + * @description: + * This is another name of @FT_Get_MM_Blend_Coordinates. + * + * @since: + * 2.7.1 + */ + FT_EXPORT( FT_Error ) + FT_Get_Var_Blend_Coordinates( FT_Face face, + FT_UInt num_coords, + FT_Fixed* coords ); + + + /************************************************************************** + * + * @function: + * FT_Set_MM_WeightVector + * + * @description: + * For Adobe MM fonts, choose an interpolated font design by directly + * setting the weight vector. + * + * This function can't be used with TrueType GX or OpenType variation + * fonts. + * + * @inout: + * face :: + * A handle to the source face. + * + * @input: + * len :: + * The length of the weight vector array. If it is larger than the + * number of designs, the extra values are ignored. If it is less than + * the number of designs, the remaining values are set to zero. + * + * weightvector :: + * An array representing the weight vector. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * Adobe Multiple Master fonts limit the number of designs, and thus the + * length of the weight vector to 16~elements. + * + * If `len` is larger than zero, this function sets the + * @FT_FACE_FLAG_VARIATION bit in @FT_Face's `face_flags` field (i.e., + * @FT_IS_VARIATION will return true). If `len` is zero, this bit flag + * is unset and the weight vector array is reset to the default values. + * + * The Adobe documentation also states that the values in the + * WeightVector array must total 1.0 +/-~0.001. In practice this does + * not seem to be enforced, so is not enforced here, either. + * + * @since: + * 2.10 + */ + FT_EXPORT( FT_Error ) + FT_Set_MM_WeightVector( FT_Face face, + FT_UInt len, + FT_Fixed* weightvector ); + + + /************************************************************************** + * + * @function: + * FT_Get_MM_WeightVector + * + * @description: + * For Adobe MM fonts, retrieve the current weight vector of the font. + * + * This function can't be used with TrueType GX or OpenType variation + * fonts. + * + * @inout: + * face :: + * A handle to the source face. + * + * len :: + * A pointer to the size of the array to be filled. If the size of the + * array is less than the number of designs, `FT_Err_Invalid_Argument` + * is returned, and `len` is set to the required size (the number of + * designs). If the size of the array is greater than the number of + * designs, the remaining entries are set to~0. On successful + * completion, `len` is set to the number of designs (i.e., the number + * of values written to the array). + * + * @output: + * weightvector :: + * An array to be filled. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * Adobe Multiple Master fonts limit the number of designs, and thus the + * length of the WeightVector to~16. + * + * @since: + * 2.10 + */ + FT_EXPORT( FT_Error ) + FT_Get_MM_WeightVector( FT_Face face, + FT_UInt* len, + FT_Fixed* weightvector ); + + + /************************************************************************** + * + * @enum: + * FT_VAR_AXIS_FLAG_XXX + * + * @description: + * A list of bit flags used in the return value of + * @FT_Get_Var_Axis_Flags. + * + * @values: + * FT_VAR_AXIS_FLAG_HIDDEN :: + * The variation axis should not be exposed to user interfaces. + * + * @since: + * 2.8.1 + */ +#define FT_VAR_AXIS_FLAG_HIDDEN 1 + + + /************************************************************************** + * + * @function: + * FT_Get_Var_Axis_Flags + * + * @description: + * Get the 'flags' field of an OpenType Variation Axis Record. + * + * Not meaningful for Adobe MM fonts (`*flags` is always zero). + * + * @input: + * master :: + * The variation descriptor. + * + * axis_index :: + * The index of the requested variation axis. + * + * @output: + * flags :: + * The 'flags' field. See @FT_VAR_AXIS_FLAG_XXX for possible values. + * + * @return: + * FreeType error code. 0~means success. + * + * @since: + * 2.8.1 + */ + FT_EXPORT( FT_Error ) + FT_Get_Var_Axis_Flags( FT_MM_Var* master, + FT_UInt axis_index, + FT_UInt* flags ); + + + /************************************************************************** + * + * @function: + * FT_Set_Named_Instance + * + * @description: + * Set or change the current named instance. + * + * @input: + * face :: + * A handle to the source face. + * + * instance_index :: + * The index of the requested instance, starting with value 1. If set + * to value 0, FreeType switches to font access without a named + * instance. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * The function uses the value of `instance_index` to set bits 16-30 of + * the face's `face_index` field. It also resets any variation applied + * to the font, and the @FT_FACE_FLAG_VARIATION bit of the face's + * `face_flags` field gets reset to zero (i.e., @FT_IS_VARIATION will + * return false). + * + * For Adobe MM fonts (which don't have named instances) this function + * simply resets the current face to the default instance. + * + * @since: + * 2.9 + */ + FT_EXPORT( FT_Error ) + FT_Set_Named_Instance( FT_Face face, + FT_UInt instance_index ); + + + /************************************************************************** + * + * @function: + * FT_Get_Default_Named_Instance + * + * @description: + * Retrieve the index of the default named instance, to be used with + * @FT_Set_Named_Instance. + * + * The default instance of a variation font is that instance for which + * the nth axis coordinate is equal to `axis[n].def` (as specified in the + * @FT_MM_Var structure), with~n covering all axes. + * + * FreeType synthesizes a named instance for the default instance if the + * font does not contain such an entry. + * + * @input: + * face :: + * A handle to the source face. + * + * @output: + * instance_index :: + * The index of the default named instance. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * For Adobe MM fonts (which don't have named instances) this function + * always returns zero for `instance_index`. + * + * @since: + * 2.13.1 + */ + FT_EXPORT( FT_Error ) + FT_Get_Default_Named_Instance( FT_Face face, + FT_UInt *instance_index ); + + /* */ + + +FT_END_HEADER + +#endif /* FTMM_H_ */ + + +/* END */ diff --git a/dependencies/linux64/include/freetype2/freetype/ftmodapi.h b/dependencies/linux64/include/freetype2/freetype/ftmodapi.h new file mode 100644 index 0000000..0ee7158 --- /dev/null +++ b/dependencies/linux64/include/freetype2/freetype/ftmodapi.h @@ -0,0 +1,807 @@ +/**************************************************************************** + * + * ftmodapi.h + * + * FreeType modules public interface (specification). + * + * Copyright (C) 1996-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + +#ifndef FTMODAPI_H_ +#define FTMODAPI_H_ + + +#include + +#ifdef FREETYPE_H +#error "freetype.h of FreeType 1 has been loaded!" +#error "Please fix the directory search order for header files" +#error "so that freetype.h of FreeType 2 is found first." +#endif + + +FT_BEGIN_HEADER + + + /************************************************************************** + * + * @section: + * module_management + * + * @title: + * Module Management + * + * @abstract: + * How to add, upgrade, remove, and control modules from FreeType. + * + * @description: + * The definitions below are used to manage modules within FreeType. + * Internal and external modules can be added, upgraded, and removed at + * runtime. For example, an alternative renderer or proprietary font + * driver can be registered and prioritized. Additionally, some module + * properties can also be controlled. + * + * Here is a list of existing values of the `module_name` field in the + * @FT_Module_Class structure. + * + * ``` + * autofitter + * bdf + * cff + * gxvalid + * otvalid + * pcf + * pfr + * psaux + * pshinter + * psnames + * raster1 + * sfnt + * smooth + * truetype + * type1 + * type42 + * t1cid + * winfonts + * ``` + * + * Note that the FreeType Cache sub-system is not a FreeType module. + * + * @order: + * FT_Module + * FT_Module_Constructor + * FT_Module_Destructor + * FT_Module_Requester + * FT_Module_Class + * + * FT_Add_Module + * FT_Get_Module + * FT_Remove_Module + * FT_Add_Default_Modules + * + * FT_FACE_DRIVER_NAME + * FT_Property_Set + * FT_Property_Get + * FT_Set_Default_Properties + * + * FT_New_Library + * FT_Done_Library + * FT_Reference_Library + * + * FT_Renderer + * FT_Renderer_Class + * + * FT_Get_Renderer + * FT_Set_Renderer + * + * FT_Set_Debug_Hook + * + */ + + + /* module bit flags */ +#define FT_MODULE_FONT_DRIVER 1 /* this module is a font driver */ +#define FT_MODULE_RENDERER 2 /* this module is a renderer */ +#define FT_MODULE_HINTER 4 /* this module is a glyph hinter */ +#define FT_MODULE_STYLER 8 /* this module is a styler */ + +#define FT_MODULE_DRIVER_SCALABLE 0x100 /* the driver supports */ + /* scalable fonts */ +#define FT_MODULE_DRIVER_NO_OUTLINES 0x200 /* the driver does not */ + /* support vector outlines */ +#define FT_MODULE_DRIVER_HAS_HINTER 0x400 /* the driver provides its */ + /* own hinter */ +#define FT_MODULE_DRIVER_HINTS_LIGHTLY 0x800 /* the driver's hinter */ + /* produces LIGHT hints */ + + + /* deprecated values */ +#define ft_module_font_driver FT_MODULE_FONT_DRIVER +#define ft_module_renderer FT_MODULE_RENDERER +#define ft_module_hinter FT_MODULE_HINTER +#define ft_module_styler FT_MODULE_STYLER + +#define ft_module_driver_scalable FT_MODULE_DRIVER_SCALABLE +#define ft_module_driver_no_outlines FT_MODULE_DRIVER_NO_OUTLINES +#define ft_module_driver_has_hinter FT_MODULE_DRIVER_HAS_HINTER +#define ft_module_driver_hints_lightly FT_MODULE_DRIVER_HINTS_LIGHTLY + + + typedef FT_Pointer FT_Module_Interface; + + + /************************************************************************** + * + * @functype: + * FT_Module_Constructor + * + * @description: + * A function used to initialize (not create) a new module object. + * + * @input: + * module :: + * The module to initialize. + */ + typedef FT_Error + (*FT_Module_Constructor)( FT_Module module ); + + + /************************************************************************** + * + * @functype: + * FT_Module_Destructor + * + * @description: + * A function used to finalize (not destroy) a given module object. + * + * @input: + * module :: + * The module to finalize. + */ + typedef void + (*FT_Module_Destructor)( FT_Module module ); + + + /************************************************************************** + * + * @functype: + * FT_Module_Requester + * + * @description: + * A function used to query a given module for a specific interface. + * + * @input: + * module :: + * The module to be searched. + * + * name :: + * The name of the interface in the module. + */ + typedef FT_Module_Interface + (*FT_Module_Requester)( FT_Module module, + const char* name ); + + + /************************************************************************** + * + * @struct: + * FT_Module_Class + * + * @description: + * The module class descriptor. While being a public structure necessary + * for FreeType's module bookkeeping, most of the fields are essentially + * internal, not to be used directly by an application. + * + * @fields: + * module_flags :: + * Bit flags describing the module. + * + * module_size :: + * The size of one module object/instance in bytes. + * + * module_name :: + * The name of the module. + * + * module_version :: + * The version, as a 16.16 fixed number (major.minor). + * + * module_requires :: + * The version of FreeType this module requires, as a 16.16 fixed + * number (major.minor). Starts at version 2.0, i.e., 0x20000. + * + * module_interface :: + * A typeless pointer to a structure (which varies between different + * modules) that holds the module's interface functions. This is + * essentially what `get_interface` returns. + * + * module_init :: + * The initializing function. + * + * module_done :: + * The finalizing function. + * + * get_interface :: + * The interface requesting function. + */ + typedef struct FT_Module_Class_ + { + FT_ULong module_flags; + FT_Long module_size; + const FT_String* module_name; + FT_Fixed module_version; + FT_Fixed module_requires; + + const void* module_interface; + + FT_Module_Constructor module_init; + FT_Module_Destructor module_done; + FT_Module_Requester get_interface; + + } FT_Module_Class; + + + /************************************************************************** + * + * @function: + * FT_Add_Module + * + * @description: + * Add a new module to a given library instance. + * + * @inout: + * library :: + * A handle to the library object. + * + * @input: + * clazz :: + * A pointer to class descriptor for the module. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * An error will be returned if a module already exists by that name, or + * if the module requires a version of FreeType that is too great. + */ + FT_EXPORT( FT_Error ) + FT_Add_Module( FT_Library library, + const FT_Module_Class* clazz ); + + + /************************************************************************** + * + * @function: + * FT_Get_Module + * + * @description: + * Find a module by its name. + * + * @input: + * library :: + * A handle to the library object. + * + * module_name :: + * The module's name (as an ASCII string). + * + * @return: + * A module handle. 0~if none was found. + * + * @note: + * FreeType's internal modules aren't documented very well, and you + * should look up the source code for details. + */ + FT_EXPORT( FT_Module ) + FT_Get_Module( FT_Library library, + const char* module_name ); + + + /************************************************************************** + * + * @function: + * FT_Remove_Module + * + * @description: + * Remove a given module from a library instance. + * + * @inout: + * library :: + * A handle to a library object. + * + * @input: + * module :: + * A handle to a module object. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * The module object is destroyed by the function in case of success. + */ + FT_EXPORT( FT_Error ) + FT_Remove_Module( FT_Library library, + FT_Module module ); + + + /************************************************************************** + * + * @macro: + * FT_FACE_DRIVER_NAME + * + * @description: + * A macro that retrieves the name of a font driver from a face object. + * + * @note: + * The font driver name is a valid `module_name` for @FT_Property_Set + * and @FT_Property_Get. This is not the same as @FT_Get_Font_Format. + * + * @since: + * 2.11 + * + */ +#define FT_FACE_DRIVER_NAME( face ) \ + ( ( *FT_REINTERPRET_CAST( FT_Module_Class**, \ + ( face )->driver ) )->module_name ) + + + /************************************************************************** + * + * @function: + * FT_Property_Set + * + * @description: + * Set a property for a given module. + * + * @input: + * library :: + * A handle to the library the module is part of. + * + * module_name :: + * The module name. + * + * property_name :: + * The property name. Properties are described in section + * @properties. + * + * Note that only a few modules have properties. + * + * value :: + * A generic pointer to a variable or structure that gives the new + * value of the property. The exact definition of `value` is + * dependent on the property; see section @properties. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * If `module_name` isn't a valid module name, or `property_name` + * doesn't specify a valid property, or if `value` doesn't represent a + * valid value for the given property, an error is returned. + * + * The following example sets property 'bar' (a simple integer) in + * module 'foo' to value~1. + * + * ``` + * FT_UInt bar; + * + * + * bar = 1; + * FT_Property_Set( library, "foo", "bar", &bar ); + * ``` + * + * Note that the FreeType Cache sub-system doesn't recognize module + * property changes. To avoid glyph lookup confusion within the cache + * you should call @FTC_Manager_Reset to completely flush the cache if a + * module property gets changed after @FTC_Manager_New has been called. + * + * It is not possible to set properties of the FreeType Cache sub-system + * itself with FT_Property_Set; use @FTC_Property_Set instead. + * + * @since: + * 2.4.11 + * + */ + FT_EXPORT( FT_Error ) + FT_Property_Set( FT_Library library, + const FT_String* module_name, + const FT_String* property_name, + const void* value ); + + + /************************************************************************** + * + * @function: + * FT_Property_Get + * + * @description: + * Get a module's property value. + * + * @input: + * library :: + * A handle to the library the module is part of. + * + * module_name :: + * The module name. + * + * property_name :: + * The property name. Properties are described in section + * @properties. + * + * @inout: + * value :: + * A generic pointer to a variable or structure that gives the value + * of the property. The exact definition of `value` is dependent on + * the property; see section @properties. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * If `module_name` isn't a valid module name, or `property_name` + * doesn't specify a valid property, or if `value` doesn't represent a + * valid value for the given property, an error is returned. + * + * The following example gets property 'baz' (a range) in module 'foo'. + * + * ``` + * typedef range_ + * { + * FT_Int32 min; + * FT_Int32 max; + * + * } range; + * + * range baz; + * + * + * FT_Property_Get( library, "foo", "baz", &baz ); + * ``` + * + * It is not possible to retrieve properties of the FreeType Cache + * sub-system with FT_Property_Get; use @FTC_Property_Get instead. + * + * @since: + * 2.4.11 + * + */ + FT_EXPORT( FT_Error ) + FT_Property_Get( FT_Library library, + const FT_String* module_name, + const FT_String* property_name, + void* value ); + + + /************************************************************************** + * + * @function: + * FT_Set_Default_Properties + * + * @description: + * If compilation option `FT_CONFIG_OPTION_ENVIRONMENT_PROPERTIES` is + * set, this function reads the `FREETYPE_PROPERTIES` environment + * variable to control driver properties. See section @properties for + * more. + * + * If the compilation option is not set, this function does nothing. + * + * `FREETYPE_PROPERTIES` has the following syntax form (broken here into + * multiple lines for better readability). + * + * ``` + * + * ':' + * '=' + * + * ':' + * '=' + * ... + * ``` + * + * Example: + * + * ``` + * FREETYPE_PROPERTIES=truetype:interpreter-version=35 \ + * cff:no-stem-darkening=0 + * ``` + * + * @inout: + * library :: + * A handle to a new library object. + * + * @since: + * 2.8 + */ + FT_EXPORT( void ) + FT_Set_Default_Properties( FT_Library library ); + + + /************************************************************************** + * + * @function: + * FT_Reference_Library + * + * @description: + * A counter gets initialized to~1 at the time an @FT_Library structure + * is created. This function increments the counter. @FT_Done_Library + * then only destroys a library if the counter is~1, otherwise it simply + * decrements the counter. + * + * This function helps in managing life-cycles of structures that + * reference @FT_Library objects. + * + * @input: + * library :: + * A handle to a target library object. + * + * @return: + * FreeType error code. 0~means success. + * + * @since: + * 2.4.2 + */ + FT_EXPORT( FT_Error ) + FT_Reference_Library( FT_Library library ); + + + /************************************************************************** + * + * @function: + * FT_New_Library + * + * @description: + * This function is used to create a new FreeType library instance from a + * given memory object. It is thus possible to use libraries with + * distinct memory allocators within the same program. Note, however, + * that the used @FT_Memory structure is expected to remain valid for the + * life of the @FT_Library object. + * + * Normally, you would call this function (followed by a call to + * @FT_Add_Default_Modules or a series of calls to @FT_Add_Module, and a + * call to @FT_Set_Default_Properties) instead of @FT_Init_FreeType to + * initialize the FreeType library. + * + * Don't use @FT_Done_FreeType but @FT_Done_Library to destroy a library + * instance. + * + * @input: + * memory :: + * A handle to the original memory object. + * + * @output: + * alibrary :: + * A pointer to handle of a new library object. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * See the discussion of reference counters in the description of + * @FT_Reference_Library. + */ + FT_EXPORT( FT_Error ) + FT_New_Library( FT_Memory memory, + FT_Library *alibrary ); + + + /************************************************************************** + * + * @function: + * FT_Done_Library + * + * @description: + * Discard a given library object. This closes all drivers and discards + * all resource objects. + * + * @input: + * library :: + * A handle to the target library. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * See the discussion of reference counters in the description of + * @FT_Reference_Library. + */ + FT_EXPORT( FT_Error ) + FT_Done_Library( FT_Library library ); + + + /************************************************************************** + * + * @functype: + * FT_DebugHook_Func + * + * @description: + * A drop-in replacement (or rather a wrapper) for the bytecode or + * charstring interpreter's main loop function. + * + * Its job is essentially + * + * - to activate debug mode to enforce single-stepping, + * + * - to call the main loop function to interpret the next opcode, and + * + * - to show the changed context to the user. + * + * An example for such a main loop function is `TT_RunIns` (declared in + * FreeType's internal header file `src/truetype/ttinterp.h`). + * + * Have a look at the source code of the `ttdebug` FreeType demo program + * for an example of a drop-in replacement. + * + * @inout: + * arg :: + * A typeless pointer, to be cast to the main loop function's data + * structure (which depends on the font module). For TrueType fonts + * it is bytecode interpreter's execution context, `TT_ExecContext`, + * which is declared in FreeType's internal header file `tttypes.h`. + */ + typedef FT_Error + (*FT_DebugHook_Func)( void* arg ); + + + /************************************************************************** + * + * @enum: + * FT_DEBUG_HOOK_XXX + * + * @description: + * A list of named debug hook indices. + * + * @values: + * FT_DEBUG_HOOK_TRUETYPE:: + * This hook index identifies the TrueType bytecode debugger. + */ +#define FT_DEBUG_HOOK_TRUETYPE 0 + + + /************************************************************************** + * + * @function: + * FT_Set_Debug_Hook + * + * @description: + * Set a debug hook function for debugging the interpreter of a font + * format. + * + * While this is a public API function, an application needs access to + * FreeType's internal header files to do something useful. + * + * Have a look at the source code of the `ttdebug` FreeType demo program + * for an example of its usage. + * + * @inout: + * library :: + * A handle to the library object. + * + * @input: + * hook_index :: + * The index of the debug hook. You should use defined enumeration + * macros like @FT_DEBUG_HOOK_TRUETYPE. + * + * debug_hook :: + * The function used to debug the interpreter. + * + * @note: + * Currently, four debug hook slots are available, but only one (for the + * TrueType interpreter) is defined. + */ + FT_EXPORT( void ) + FT_Set_Debug_Hook( FT_Library library, + FT_UInt hook_index, + FT_DebugHook_Func debug_hook ); + + + /************************************************************************** + * + * @function: + * FT_Add_Default_Modules + * + * @description: + * Add the set of default drivers to a given library object. This is + * only useful when you create a library object with @FT_New_Library + * (usually to plug a custom memory manager). + * + * @inout: + * library :: + * A handle to a new library object. + */ + FT_EXPORT( void ) + FT_Add_Default_Modules( FT_Library library ); + + + + /************************************************************************** + * + * @section: + * truetype_engine + * + * @title: + * The TrueType Engine + * + * @abstract: + * TrueType bytecode support. + * + * @description: + * This section contains a function used to query the level of TrueType + * bytecode support compiled in this version of the library. + * + */ + + + /************************************************************************** + * + * @enum: + * FT_TrueTypeEngineType + * + * @description: + * A list of values describing which kind of TrueType bytecode engine is + * implemented in a given FT_Library instance. It is used by the + * @FT_Get_TrueType_Engine_Type function. + * + * @values: + * FT_TRUETYPE_ENGINE_TYPE_NONE :: + * The library doesn't implement any kind of bytecode interpreter. + * + * FT_TRUETYPE_ENGINE_TYPE_UNPATENTED :: + * Deprecated and removed. + * + * FT_TRUETYPE_ENGINE_TYPE_PATENTED :: + * The library implements a bytecode interpreter that covers the full + * instruction set of the TrueType virtual machine (this was governed + * by patents until May 2010, hence the name). + * + * @since: + * 2.2 + * + */ + typedef enum FT_TrueTypeEngineType_ + { + FT_TRUETYPE_ENGINE_TYPE_NONE = 0, + FT_TRUETYPE_ENGINE_TYPE_UNPATENTED, + FT_TRUETYPE_ENGINE_TYPE_PATENTED + + } FT_TrueTypeEngineType; + + + /************************************************************************** + * + * @function: + * FT_Get_TrueType_Engine_Type + * + * @description: + * Return an @FT_TrueTypeEngineType value to indicate which level of the + * TrueType virtual machine a given library instance supports. + * + * @input: + * library :: + * A library instance. + * + * @return: + * A value indicating which level is supported. + * + * @since: + * 2.2 + * + */ + FT_EXPORT( FT_TrueTypeEngineType ) + FT_Get_TrueType_Engine_Type( FT_Library library ); + + /* */ + + +FT_END_HEADER + +#endif /* FTMODAPI_H_ */ + + +/* END */ diff --git a/dependencies/linux64/include/freetype2/freetype/ftmoderr.h b/dependencies/linux64/include/freetype2/freetype/ftmoderr.h new file mode 100644 index 0000000..6722fbf --- /dev/null +++ b/dependencies/linux64/include/freetype2/freetype/ftmoderr.h @@ -0,0 +1,204 @@ +/**************************************************************************** + * + * ftmoderr.h + * + * FreeType module error offsets (specification). + * + * Copyright (C) 2001-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + + /************************************************************************** + * + * This file is used to define the FreeType module error codes. + * + * If the macro `FT_CONFIG_OPTION_USE_MODULE_ERRORS` in `ftoption.h` is + * set, the lower byte of an error value identifies the error code as + * usual. In addition, the higher byte identifies the module. For + * example, the error `FT_Err_Invalid_File_Format` has value 0x0003, the + * error `TT_Err_Invalid_File_Format` has value 0x1303, the error + * `T1_Err_Invalid_File_Format` has value 0x1403, etc. + * + * Note that `FT_Err_Ok`, `TT_Err_Ok`, etc. are always equal to zero, + * including the high byte. + * + * If `FT_CONFIG_OPTION_USE_MODULE_ERRORS` isn't set, the higher byte of an + * error value is set to zero. + * + * To hide the various `XXX_Err_` prefixes in the source code, FreeType + * provides some macros in `fttypes.h`. + * + * FT_ERR( err ) + * + * Add current error module prefix (as defined with the `FT_ERR_PREFIX` + * macro) to `err`. For example, in the BDF module the line + * + * ``` + * error = FT_ERR( Invalid_Outline ); + * ``` + * + * expands to + * + * ``` + * error = BDF_Err_Invalid_Outline; + * ``` + * + * For simplicity, you can always use `FT_Err_Ok` directly instead of + * `FT_ERR( Ok )`. + * + * FT_ERR_EQ( errcode, err ) + * FT_ERR_NEQ( errcode, err ) + * + * Compare error code `errcode` with the error `err` for equality and + * inequality, respectively. Example: + * + * ``` + * if ( FT_ERR_EQ( error, Invalid_Outline ) ) + * ... + * ``` + * + * Using this macro you don't have to think about error prefixes. Of + * course, if module errors are not active, the above example is the + * same as + * + * ``` + * if ( error == FT_Err_Invalid_Outline ) + * ... + * ``` + * + * FT_ERROR_BASE( errcode ) + * FT_ERROR_MODULE( errcode ) + * + * Get base error and module error code, respectively. + * + * It can also be used to create a module error message table easily with + * something like + * + * ``` + * #undef FTMODERR_H_ + * #define FT_MODERRDEF( e, v, s ) { FT_Mod_Err_ ## e, s }, + * #define FT_MODERR_START_LIST { + * #define FT_MODERR_END_LIST { 0, 0 } }; + * + * const struct + * { + * int mod_err_offset; + * const char* mod_err_msg + * } ft_mod_errors[] = + * + * #include + * ``` + * + */ + + +#ifndef FTMODERR_H_ +#define FTMODERR_H_ + + + /*******************************************************************/ + /*******************************************************************/ + /***** *****/ + /***** SETUP MACROS *****/ + /***** *****/ + /*******************************************************************/ + /*******************************************************************/ + + +#undef FT_NEED_EXTERN_C + +#ifndef FT_MODERRDEF + +#ifdef FT_CONFIG_OPTION_USE_MODULE_ERRORS +#define FT_MODERRDEF( e, v, s ) FT_Mod_Err_ ## e = v, +#else +#define FT_MODERRDEF( e, v, s ) FT_Mod_Err_ ## e = 0, +#endif + +#define FT_MODERR_START_LIST enum { +#define FT_MODERR_END_LIST FT_Mod_Err_Max }; + +#ifdef __cplusplus +#define FT_NEED_EXTERN_C + extern "C" { +#endif + +#endif /* !FT_MODERRDEF */ + + + /*******************************************************************/ + /*******************************************************************/ + /***** *****/ + /***** LIST MODULE ERROR BASES *****/ + /***** *****/ + /*******************************************************************/ + /*******************************************************************/ + + +#ifdef FT_MODERR_START_LIST + FT_MODERR_START_LIST +#endif + + + FT_MODERRDEF( Base, 0x000, "base module" ) + FT_MODERRDEF( Autofit, 0x100, "autofitter module" ) + FT_MODERRDEF( BDF, 0x200, "BDF module" ) + FT_MODERRDEF( Bzip2, 0x300, "Bzip2 module" ) + FT_MODERRDEF( Cache, 0x400, "cache module" ) + FT_MODERRDEF( CFF, 0x500, "CFF module" ) + FT_MODERRDEF( CID, 0x600, "CID module" ) + FT_MODERRDEF( Gzip, 0x700, "Gzip module" ) + FT_MODERRDEF( LZW, 0x800, "LZW module" ) + FT_MODERRDEF( OTvalid, 0x900, "OpenType validation module" ) + FT_MODERRDEF( PCF, 0xA00, "PCF module" ) + FT_MODERRDEF( PFR, 0xB00, "PFR module" ) + FT_MODERRDEF( PSaux, 0xC00, "PS auxiliary module" ) + FT_MODERRDEF( PShinter, 0xD00, "PS hinter module" ) + FT_MODERRDEF( PSnames, 0xE00, "PS names module" ) + FT_MODERRDEF( Raster, 0xF00, "raster module" ) + FT_MODERRDEF( SFNT, 0x1000, "SFNT module" ) + FT_MODERRDEF( Smooth, 0x1100, "smooth raster module" ) + FT_MODERRDEF( TrueType, 0x1200, "TrueType module" ) + FT_MODERRDEF( Type1, 0x1300, "Type 1 module" ) + FT_MODERRDEF( Type42, 0x1400, "Type 42 module" ) + FT_MODERRDEF( Winfonts, 0x1500, "Windows FON/FNT module" ) + FT_MODERRDEF( GXvalid, 0x1600, "GX validation module" ) + FT_MODERRDEF( Sdf, 0x1700, "Signed distance field raster module" ) + + +#ifdef FT_MODERR_END_LIST + FT_MODERR_END_LIST +#endif + + + /*******************************************************************/ + /*******************************************************************/ + /***** *****/ + /***** CLEANUP *****/ + /***** *****/ + /*******************************************************************/ + /*******************************************************************/ + + +#ifdef FT_NEED_EXTERN_C + } +#endif + +#undef FT_MODERR_START_LIST +#undef FT_MODERR_END_LIST +#undef FT_MODERRDEF +#undef FT_NEED_EXTERN_C + + +#endif /* FTMODERR_H_ */ + + +/* END */ diff --git a/dependencies/linux64/include/freetype2/freetype/ftotval.h b/dependencies/linux64/include/freetype2/freetype/ftotval.h new file mode 100644 index 0000000..810200b --- /dev/null +++ b/dependencies/linux64/include/freetype2/freetype/ftotval.h @@ -0,0 +1,206 @@ +/**************************************************************************** + * + * ftotval.h + * + * FreeType API for validating OpenType tables (specification). + * + * Copyright (C) 2004-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + +/**************************************************************************** + * + * + * Warning: This module might be moved to a different library in the + * future to avoid a tight dependency between FreeType and the + * OpenType specification. + * + * + */ + + +#ifndef FTOTVAL_H_ +#define FTOTVAL_H_ + +#include + +#ifdef FREETYPE_H +#error "freetype.h of FreeType 1 has been loaded!" +#error "Please fix the directory search order for header files" +#error "so that freetype.h of FreeType 2 is found first." +#endif + + +FT_BEGIN_HEADER + + + /************************************************************************** + * + * @section: + * ot_validation + * + * @title: + * OpenType Validation + * + * @abstract: + * An API to validate OpenType tables. + * + * @description: + * This section contains the declaration of functions to validate some + * OpenType tables (BASE, GDEF, GPOS, GSUB, JSTF, MATH). + * + * @order: + * FT_OpenType_Validate + * FT_OpenType_Free + * + * FT_VALIDATE_OTXXX + * + */ + + + /************************************************************************** + * + * @enum: + * FT_VALIDATE_OTXXX + * + * @description: + * A list of bit-field constants used with @FT_OpenType_Validate to + * indicate which OpenType tables should be validated. + * + * @values: + * FT_VALIDATE_BASE :: + * Validate BASE table. + * + * FT_VALIDATE_GDEF :: + * Validate GDEF table. + * + * FT_VALIDATE_GPOS :: + * Validate GPOS table. + * + * FT_VALIDATE_GSUB :: + * Validate GSUB table. + * + * FT_VALIDATE_JSTF :: + * Validate JSTF table. + * + * FT_VALIDATE_MATH :: + * Validate MATH table. + * + * FT_VALIDATE_OT :: + * Validate all OpenType tables (BASE, GDEF, GPOS, GSUB, JSTF, MATH). + * + */ +#define FT_VALIDATE_BASE 0x0100 +#define FT_VALIDATE_GDEF 0x0200 +#define FT_VALIDATE_GPOS 0x0400 +#define FT_VALIDATE_GSUB 0x0800 +#define FT_VALIDATE_JSTF 0x1000 +#define FT_VALIDATE_MATH 0x2000 + +#define FT_VALIDATE_OT ( FT_VALIDATE_BASE | \ + FT_VALIDATE_GDEF | \ + FT_VALIDATE_GPOS | \ + FT_VALIDATE_GSUB | \ + FT_VALIDATE_JSTF | \ + FT_VALIDATE_MATH ) + + + /************************************************************************** + * + * @function: + * FT_OpenType_Validate + * + * @description: + * Validate various OpenType tables to assure that all offsets and + * indices are valid. The idea is that a higher-level library that + * actually does the text layout can access those tables without error + * checking (which can be quite time consuming). + * + * @input: + * face :: + * A handle to the input face. + * + * validation_flags :: + * A bit field that specifies the tables to be validated. See + * @FT_VALIDATE_OTXXX for possible values. + * + * @output: + * BASE_table :: + * A pointer to the BASE table. + * + * GDEF_table :: + * A pointer to the GDEF table. + * + * GPOS_table :: + * A pointer to the GPOS table. + * + * GSUB_table :: + * A pointer to the GSUB table. + * + * JSTF_table :: + * A pointer to the JSTF table. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * This function only works with OpenType fonts, returning an error + * otherwise. + * + * After use, the application should deallocate the five tables with + * @FT_OpenType_Free. A `NULL` value indicates that the table either + * doesn't exist in the font, or the application hasn't asked for + * validation. + */ + FT_EXPORT( FT_Error ) + FT_OpenType_Validate( FT_Face face, + FT_UInt validation_flags, + FT_Bytes *BASE_table, + FT_Bytes *GDEF_table, + FT_Bytes *GPOS_table, + FT_Bytes *GSUB_table, + FT_Bytes *JSTF_table ); + + + /************************************************************************** + * + * @function: + * FT_OpenType_Free + * + * @description: + * Free the buffer allocated by OpenType validator. + * + * @input: + * face :: + * A handle to the input face. + * + * table :: + * The pointer to the buffer that is allocated by + * @FT_OpenType_Validate. + * + * @note: + * This function must be used to free the buffer allocated by + * @FT_OpenType_Validate only. + */ + FT_EXPORT( void ) + FT_OpenType_Free( FT_Face face, + FT_Bytes table ); + + + /* */ + + +FT_END_HEADER + +#endif /* FTOTVAL_H_ */ + + +/* END */ diff --git a/dependencies/linux64/include/freetype2/freetype/ftoutln.h b/dependencies/linux64/include/freetype2/freetype/ftoutln.h new file mode 100644 index 0000000..44e94b4 --- /dev/null +++ b/dependencies/linux64/include/freetype2/freetype/ftoutln.h @@ -0,0 +1,588 @@ +/**************************************************************************** + * + * ftoutln.h + * + * Support for the FT_Outline type used to store glyph shapes of + * most scalable font formats (specification). + * + * Copyright (C) 1996-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + +#ifndef FTOUTLN_H_ +#define FTOUTLN_H_ + + +#include + +#ifdef FREETYPE_H +#error "freetype.h of FreeType 1 has been loaded!" +#error "Please fix the directory search order for header files" +#error "so that freetype.h of FreeType 2 is found first." +#endif + + +FT_BEGIN_HEADER + + + /************************************************************************** + * + * @section: + * outline_processing + * + * @title: + * Outline Processing + * + * @abstract: + * Functions to create, transform, and render vectorial glyph images. + * + * @description: + * This section contains routines used to create and destroy scalable + * glyph images known as 'outlines'. These can also be measured, + * transformed, and converted into bitmaps and pixmaps. + * + * @order: + * FT_Outline + * FT_Outline_New + * FT_Outline_Done + * FT_Outline_Copy + * FT_Outline_Translate + * FT_Outline_Transform + * FT_Outline_Embolden + * FT_Outline_EmboldenXY + * FT_Outline_Reverse + * FT_Outline_Check + * + * FT_Outline_Get_CBox + * FT_Outline_Get_BBox + * + * FT_Outline_Get_Bitmap + * FT_Outline_Render + * FT_Outline_Decompose + * FT_Outline_Funcs + * FT_Outline_MoveToFunc + * FT_Outline_LineToFunc + * FT_Outline_ConicToFunc + * FT_Outline_CubicToFunc + * + * FT_Orientation + * FT_Outline_Get_Orientation + * + * FT_OUTLINE_XXX + * + */ + + + /************************************************************************** + * + * @function: + * FT_Outline_Decompose + * + * @description: + * Walk over an outline's structure to decompose it into individual + * segments and Bezier arcs. This function also emits 'move to' + * operations to indicate the start of new contours in the outline. + * + * @input: + * outline :: + * A pointer to the source target. + * + * func_interface :: + * A table of 'emitters', i.e., function pointers called during + * decomposition to indicate path operations. + * + * @inout: + * user :: + * A typeless pointer that is passed to each emitter during the + * decomposition. It can be used to store the state during the + * decomposition. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * Degenerate contours, segments, and Bezier arcs may be reported. In + * most cases, it is best to filter these out before using the outline + * for stroking or other path modification purposes (which may cause + * degenerate segments to become non-degenerate and visible, like when + * stroke caps are used or the path is otherwise outset). Some glyph + * outlines may contain deliberate degenerate single points for mark + * attachement. + * + * Similarly, the function returns success for an empty outline also + * (doing nothing, that is, not calling any emitter); if necessary, you + * should filter this out, too. + */ + FT_EXPORT( FT_Error ) + FT_Outline_Decompose( FT_Outline* outline, + const FT_Outline_Funcs* func_interface, + void* user ); + + + /************************************************************************** + * + * @function: + * FT_Outline_New + * + * @description: + * Create a new outline of a given size. + * + * @input: + * library :: + * A handle to the library object from where the outline is allocated. + * Note however that the new outline will **not** necessarily be + * **freed**, when destroying the library, by @FT_Done_FreeType. + * + * numPoints :: + * The maximum number of points within the outline. Must be smaller + * than or equal to 0xFFFF (65535). + * + * numContours :: + * The maximum number of contours within the outline. This value must + * be in the range 0 to `numPoints`. + * + * @output: + * anoutline :: + * A handle to the new outline. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * The reason why this function takes a `library` parameter is simply to + * use the library's memory allocator. + */ + FT_EXPORT( FT_Error ) + FT_Outline_New( FT_Library library, + FT_UInt numPoints, + FT_Int numContours, + FT_Outline *anoutline ); + + + /************************************************************************** + * + * @function: + * FT_Outline_Done + * + * @description: + * Destroy an outline created with @FT_Outline_New. + * + * @input: + * library :: + * A handle of the library object used to allocate the outline. + * + * outline :: + * A pointer to the outline object to be discarded. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * If the outline's 'owner' field is not set, only the outline descriptor + * will be released. + */ + FT_EXPORT( FT_Error ) + FT_Outline_Done( FT_Library library, + FT_Outline* outline ); + + + /************************************************************************** + * + * @function: + * FT_Outline_Check + * + * @description: + * Check the contents of an outline descriptor. + * + * @input: + * outline :: + * A handle to a source outline. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * An empty outline, or an outline with a single point only is also + * valid. + */ + FT_EXPORT( FT_Error ) + FT_Outline_Check( FT_Outline* outline ); + + + /************************************************************************** + * + * @function: + * FT_Outline_Get_CBox + * + * @description: + * Return an outline's 'control box'. The control box encloses all the + * outline's points, including Bezier control points. Though it + * coincides with the exact bounding box for most glyphs, it can be + * slightly larger in some situations (like when rotating an outline that + * contains Bezier outside arcs). + * + * Computing the control box is very fast, while getting the bounding box + * can take much more time as it needs to walk over all segments and arcs + * in the outline. To get the latter, you can use the 'ftbbox' + * component, which is dedicated to this single task. + * + * @input: + * outline :: + * A pointer to the source outline descriptor. + * + * @output: + * acbox :: + * The outline's control box. + * + * @note: + * See @FT_Glyph_Get_CBox for a discussion of tricky fonts. + */ + FT_EXPORT( void ) + FT_Outline_Get_CBox( const FT_Outline* outline, + FT_BBox *acbox ); + + + /************************************************************************** + * + * @function: + * FT_Outline_Translate + * + * @description: + * Apply a simple translation to the points of an outline. + * + * @inout: + * outline :: + * A pointer to the target outline descriptor. + * + * @input: + * xOffset :: + * The horizontal offset. + * + * yOffset :: + * The vertical offset. + */ + FT_EXPORT( void ) + FT_Outline_Translate( const FT_Outline* outline, + FT_Pos xOffset, + FT_Pos yOffset ); + + + /************************************************************************** + * + * @function: + * FT_Outline_Copy + * + * @description: + * Copy an outline into another one. Both objects must have the same + * sizes (number of points & number of contours) when this function is + * called. + * + * @input: + * source :: + * A handle to the source outline. + * + * @output: + * target :: + * A handle to the target outline. + * + * @return: + * FreeType error code. 0~means success. + */ + FT_EXPORT( FT_Error ) + FT_Outline_Copy( const FT_Outline* source, + FT_Outline *target ); + + + /************************************************************************** + * + * @function: + * FT_Outline_Transform + * + * @description: + * Apply a simple 2x2 matrix to all of an outline's points. Useful for + * applying rotations, slanting, flipping, etc. + * + * @inout: + * outline :: + * A pointer to the target outline descriptor. + * + * @input: + * matrix :: + * A pointer to the transformation matrix. + * + * @note: + * You can use @FT_Outline_Translate if you need to translate the + * outline's points. + */ + FT_EXPORT( void ) + FT_Outline_Transform( const FT_Outline* outline, + const FT_Matrix* matrix ); + + + /************************************************************************** + * + * @function: + * FT_Outline_Embolden + * + * @description: + * Embolden an outline. The new outline will be at most 4~times + * `strength` pixels wider and higher. You may think of the left and + * bottom borders as unchanged. + * + * Negative `strength` values to reduce the outline thickness are + * possible also. + * + * @inout: + * outline :: + * A handle to the target outline. + * + * @input: + * strength :: + * How strong the glyph is emboldened. Expressed in 26.6 pixel format. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * The used algorithm to increase or decrease the thickness of the glyph + * doesn't change the number of points; this means that certain + * situations like acute angles or intersections are sometimes handled + * incorrectly. + * + * If you need 'better' metrics values you should call + * @FT_Outline_Get_CBox or @FT_Outline_Get_BBox. + * + * To get meaningful results, font scaling values must be set with + * functions like @FT_Set_Char_Size before calling FT_Render_Glyph. + * + * @example: + * ``` + * FT_Load_Glyph( face, index, FT_LOAD_DEFAULT ); + * + * if ( face->glyph->format == FT_GLYPH_FORMAT_OUTLINE ) + * FT_Outline_Embolden( &face->glyph->outline, strength ); + * ``` + * + */ + FT_EXPORT( FT_Error ) + FT_Outline_Embolden( FT_Outline* outline, + FT_Pos strength ); + + + /************************************************************************** + * + * @function: + * FT_Outline_EmboldenXY + * + * @description: + * Embolden an outline. The new outline will be `xstrength` pixels wider + * and `ystrength` pixels higher. Otherwise, it is similar to + * @FT_Outline_Embolden, which uses the same strength in both directions. + * + * @since: + * 2.4.10 + */ + FT_EXPORT( FT_Error ) + FT_Outline_EmboldenXY( FT_Outline* outline, + FT_Pos xstrength, + FT_Pos ystrength ); + + + /************************************************************************** + * + * @function: + * FT_Outline_Reverse + * + * @description: + * Reverse the drawing direction of an outline. This is used to ensure + * consistent fill conventions for mirrored glyphs. + * + * @inout: + * outline :: + * A pointer to the target outline descriptor. + * + * @note: + * This function toggles the bit flag @FT_OUTLINE_REVERSE_FILL in the + * outline's `flags` field. + * + * It shouldn't be used by a normal client application, unless it knows + * what it is doing. + */ + FT_EXPORT( void ) + FT_Outline_Reverse( FT_Outline* outline ); + + + /************************************************************************** + * + * @function: + * FT_Outline_Get_Bitmap + * + * @description: + * Render an outline within a bitmap. The outline's image is simply + * OR-ed to the target bitmap. + * + * @input: + * library :: + * A handle to a FreeType library object. + * + * outline :: + * A pointer to the source outline descriptor. + * + * @inout: + * abitmap :: + * A pointer to the target bitmap descriptor. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * This function does **not create** the bitmap, it only renders an + * outline image within the one you pass to it! Consequently, the + * various fields in `abitmap` should be set accordingly. + * + * It will use the raster corresponding to the default glyph format. + * + * The value of the `num_grays` field in `abitmap` is ignored. If you + * select the gray-level rasterizer, and you want less than 256 gray + * levels, you have to use @FT_Outline_Render directly. + */ + FT_EXPORT( FT_Error ) + FT_Outline_Get_Bitmap( FT_Library library, + FT_Outline* outline, + const FT_Bitmap *abitmap ); + + + /************************************************************************** + * + * @function: + * FT_Outline_Render + * + * @description: + * Render an outline within a bitmap using the current scan-convert. + * + * @input: + * library :: + * A handle to a FreeType library object. + * + * outline :: + * A pointer to the source outline descriptor. + * + * @inout: + * params :: + * A pointer to an @FT_Raster_Params structure used to describe the + * rendering operation. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * This advanced function uses @FT_Raster_Params as an argument. + * The field `params.source` will be set to `outline` before the scan + * converter is called, which means that the value you give to it is + * actually ignored. Either `params.target` must point to preallocated + * bitmap, or @FT_RASTER_FLAG_DIRECT must be set in `params.flags` + * allowing FreeType rasterizer to be used for direct composition, + * translucency, etc. See @FT_Raster_Params for more details. + */ + FT_EXPORT( FT_Error ) + FT_Outline_Render( FT_Library library, + FT_Outline* outline, + FT_Raster_Params* params ); + + + /************************************************************************** + * + * @enum: + * FT_Orientation + * + * @description: + * A list of values used to describe an outline's contour orientation. + * + * The TrueType and PostScript specifications use different conventions + * to determine whether outline contours should be filled or unfilled. + * + * @values: + * FT_ORIENTATION_TRUETYPE :: + * According to the TrueType specification, clockwise contours must be + * filled, and counter-clockwise ones must be unfilled. + * + * FT_ORIENTATION_POSTSCRIPT :: + * According to the PostScript specification, counter-clockwise + * contours must be filled, and clockwise ones must be unfilled. + * + * FT_ORIENTATION_FILL_RIGHT :: + * This is identical to @FT_ORIENTATION_TRUETYPE, but is used to + * remember that in TrueType, everything that is to the right of the + * drawing direction of a contour must be filled. + * + * FT_ORIENTATION_FILL_LEFT :: + * This is identical to @FT_ORIENTATION_POSTSCRIPT, but is used to + * remember that in PostScript, everything that is to the left of the + * drawing direction of a contour must be filled. + * + * FT_ORIENTATION_NONE :: + * The orientation cannot be determined. That is, different parts of + * the glyph have different orientation. + * + */ + typedef enum FT_Orientation_ + { + FT_ORIENTATION_TRUETYPE = 0, + FT_ORIENTATION_POSTSCRIPT = 1, + FT_ORIENTATION_FILL_RIGHT = FT_ORIENTATION_TRUETYPE, + FT_ORIENTATION_FILL_LEFT = FT_ORIENTATION_POSTSCRIPT, + FT_ORIENTATION_NONE + + } FT_Orientation; + + + /************************************************************************** + * + * @function: + * FT_Outline_Get_Orientation + * + * @description: + * This function analyzes a glyph outline and tries to compute its fill + * orientation (see @FT_Orientation). This is done by integrating the + * total area covered by the outline. The positive integral corresponds + * to the clockwise orientation and @FT_ORIENTATION_POSTSCRIPT is + * returned. The negative integral corresponds to the counter-clockwise + * orientation and @FT_ORIENTATION_TRUETYPE is returned. + * + * Note that this will return @FT_ORIENTATION_TRUETYPE for empty + * outlines. + * + * @input: + * outline :: + * A handle to the source outline. + * + * @return: + * The orientation. + * + */ + FT_EXPORT( FT_Orientation ) + FT_Outline_Get_Orientation( FT_Outline* outline ); + + + /* */ + + +FT_END_HEADER + +#endif /* FTOUTLN_H_ */ + + +/* END */ + + +/* Local Variables: */ +/* coding: utf-8 */ +/* End: */ diff --git a/dependencies/linux64/include/freetype2/freetype/ftparams.h b/dependencies/linux64/include/freetype2/freetype/ftparams.h new file mode 100644 index 0000000..43bf69c --- /dev/null +++ b/dependencies/linux64/include/freetype2/freetype/ftparams.h @@ -0,0 +1,218 @@ +/**************************************************************************** + * + * ftparams.h + * + * FreeType API for possible FT_Parameter tags (specification only). + * + * Copyright (C) 2017-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + +#ifndef FTPARAMS_H_ +#define FTPARAMS_H_ + +#include + +#ifdef FREETYPE_H +#error "freetype.h of FreeType 1 has been loaded!" +#error "Please fix the directory search order for header files" +#error "so that freetype.h of FreeType 2 is found first." +#endif + + +FT_BEGIN_HEADER + + + /************************************************************************** + * + * @section: + * parameter_tags + * + * @title: + * Parameter Tags + * + * @abstract: + * Macros for driver property and font loading parameter tags. + * + * @description: + * This section contains macros for the @FT_Parameter structure that are + * used with various functions to activate some special functionality or + * different behaviour of various components of FreeType. + * + */ + + + /************************************************************************** + * + * @enum: + * FT_PARAM_TAG_IGNORE_TYPOGRAPHIC_FAMILY + * + * @description: + * A tag for @FT_Parameter to make @FT_Open_Face ignore typographic + * family names in the 'name' table (introduced in OpenType version 1.4). + * Use this for backward compatibility with legacy systems that have a + * four-faces-per-family restriction. + * + * @since: + * 2.8 + * + */ +#define FT_PARAM_TAG_IGNORE_TYPOGRAPHIC_FAMILY \ + FT_MAKE_TAG( 'i', 'g', 'p', 'f' ) + + + /* this constant is deprecated */ +#define FT_PARAM_TAG_IGNORE_PREFERRED_FAMILY \ + FT_PARAM_TAG_IGNORE_TYPOGRAPHIC_FAMILY + + + /************************************************************************** + * + * @enum: + * FT_PARAM_TAG_IGNORE_TYPOGRAPHIC_SUBFAMILY + * + * @description: + * A tag for @FT_Parameter to make @FT_Open_Face ignore typographic + * subfamily names in the 'name' table (introduced in OpenType version + * 1.4). Use this for backward compatibility with legacy systems that + * have a four-faces-per-family restriction. + * + * @since: + * 2.8 + * + */ +#define FT_PARAM_TAG_IGNORE_TYPOGRAPHIC_SUBFAMILY \ + FT_MAKE_TAG( 'i', 'g', 'p', 's' ) + + + /* this constant is deprecated */ +#define FT_PARAM_TAG_IGNORE_PREFERRED_SUBFAMILY \ + FT_PARAM_TAG_IGNORE_TYPOGRAPHIC_SUBFAMILY + + + /************************************************************************** + * + * @enum: + * FT_PARAM_TAG_INCREMENTAL + * + * @description: + * An @FT_Parameter tag to be used with @FT_Open_Face to indicate + * incremental glyph loading. + * + */ +#define FT_PARAM_TAG_INCREMENTAL \ + FT_MAKE_TAG( 'i', 'n', 'c', 'r' ) + + + /************************************************************************** + * + * @enum: + * FT_PARAM_TAG_IGNORE_SBIX + * + * @description: + * A tag for @FT_Parameter to make @FT_Open_Face ignore an 'sbix' table + * while loading a font. Use this if @FT_FACE_FLAG_SBIX is set and you + * want to access the outline glyphs in the font. + * + */ +#define FT_PARAM_TAG_IGNORE_SBIX \ + FT_MAKE_TAG( 'i', 's', 'b', 'x' ) + + + /************************************************************************** + * + * @enum: + * FT_PARAM_TAG_LCD_FILTER_WEIGHTS + * + * @description: + * An @FT_Parameter tag to be used with @FT_Face_Properties. The + * corresponding argument specifies the five LCD filter weights for a + * given face (if using @FT_LOAD_TARGET_LCD, for example), overriding the + * global default values or the values set up with + * @FT_Library_SetLcdFilterWeights. + * + * @since: + * 2.8 + * + */ +#define FT_PARAM_TAG_LCD_FILTER_WEIGHTS \ + FT_MAKE_TAG( 'l', 'c', 'd', 'f' ) + + + /************************************************************************** + * + * @enum: + * FT_PARAM_TAG_RANDOM_SEED + * + * @description: + * An @FT_Parameter tag to be used with @FT_Face_Properties. The + * corresponding 32bit signed integer argument overrides the font + * driver's random seed value with a face-specific one; see @random-seed. + * + * @since: + * 2.8 + * + */ +#define FT_PARAM_TAG_RANDOM_SEED \ + FT_MAKE_TAG( 's', 'e', 'e', 'd' ) + + + /************************************************************************** + * + * @enum: + * FT_PARAM_TAG_STEM_DARKENING + * + * @description: + * An @FT_Parameter tag to be used with @FT_Face_Properties. The + * corresponding Boolean argument specifies whether to apply stem + * darkening, overriding the global default values or the values set up + * with @FT_Property_Set (see @no-stem-darkening). + * + * This is a passive setting that only takes effect if the font driver or + * autohinter honors it, which the CFF, Type~1, and CID drivers always + * do, but the autohinter only in 'light' hinting mode (as of version + * 2.9). + * + * @since: + * 2.8 + * + */ +#define FT_PARAM_TAG_STEM_DARKENING \ + FT_MAKE_TAG( 'd', 'a', 'r', 'k' ) + + + /************************************************************************** + * + * @enum: + * FT_PARAM_TAG_UNPATENTED_HINTING + * + * @description: + * Deprecated, no effect. + * + * Previously: A constant used as the tag of an @FT_Parameter structure + * to indicate that unpatented methods only should be used by the + * TrueType bytecode interpreter for a typeface opened by @FT_Open_Face. + * + */ +#define FT_PARAM_TAG_UNPATENTED_HINTING \ + FT_MAKE_TAG( 'u', 'n', 'p', 'a' ) + + + /* */ + + +FT_END_HEADER + + +#endif /* FTPARAMS_H_ */ + + +/* END */ diff --git a/dependencies/linux64/include/freetype2/freetype/ftpfr.h b/dependencies/linux64/include/freetype2/freetype/ftpfr.h new file mode 100644 index 0000000..1a712b9 --- /dev/null +++ b/dependencies/linux64/include/freetype2/freetype/ftpfr.h @@ -0,0 +1,179 @@ +/**************************************************************************** + * + * ftpfr.h + * + * FreeType API for accessing PFR-specific data (specification only). + * + * Copyright (C) 2002-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + +#ifndef FTPFR_H_ +#define FTPFR_H_ + +#include + +#ifdef FREETYPE_H +#error "freetype.h of FreeType 1 has been loaded!" +#error "Please fix the directory search order for header files" +#error "so that freetype.h of FreeType 2 is found first." +#endif + + +FT_BEGIN_HEADER + + + /************************************************************************** + * + * @section: + * pfr_fonts + * + * @title: + * PFR Fonts + * + * @abstract: + * PFR/TrueDoc-specific API. + * + * @description: + * This section contains the declaration of PFR-specific functions. + * + */ + + + /************************************************************************** + * + * @function: + * FT_Get_PFR_Metrics + * + * @description: + * Return the outline and metrics resolutions of a given PFR face. + * + * @input: + * face :: + * Handle to the input face. It can be a non-PFR face. + * + * @output: + * aoutline_resolution :: + * Outline resolution. This is equivalent to `face->units_per_EM` for + * non-PFR fonts. Optional (parameter can be `NULL`). + * + * ametrics_resolution :: + * Metrics resolution. This is equivalent to `outline_resolution` for + * non-PFR fonts. Optional (parameter can be `NULL`). + * + * ametrics_x_scale :: + * A 16.16 fixed-point number used to scale distance expressed in + * metrics units to device subpixels. This is equivalent to + * `face->size->x_scale`, but for metrics only. Optional (parameter + * can be `NULL`). + * + * ametrics_y_scale :: + * Same as `ametrics_x_scale` but for the vertical direction. + * optional (parameter can be `NULL`). + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * If the input face is not a PFR, this function will return an error. + * However, in all cases, it will return valid values. + */ + FT_EXPORT( FT_Error ) + FT_Get_PFR_Metrics( FT_Face face, + FT_UInt *aoutline_resolution, + FT_UInt *ametrics_resolution, + FT_Fixed *ametrics_x_scale, + FT_Fixed *ametrics_y_scale ); + + + /************************************************************************** + * + * @function: + * FT_Get_PFR_Kerning + * + * @description: + * Return the kerning pair corresponding to two glyphs in a PFR face. + * The distance is expressed in metrics units, unlike the result of + * @FT_Get_Kerning. + * + * @input: + * face :: + * A handle to the input face. + * + * left :: + * Index of the left glyph. + * + * right :: + * Index of the right glyph. + * + * @output: + * avector :: + * A kerning vector. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * This function always return distances in original PFR metrics units. + * This is unlike @FT_Get_Kerning with the @FT_KERNING_UNSCALED mode, + * which always returns distances converted to outline units. + * + * You can use the value of the `x_scale` and `y_scale` parameters + * returned by @FT_Get_PFR_Metrics to scale these to device subpixels. + */ + FT_EXPORT( FT_Error ) + FT_Get_PFR_Kerning( FT_Face face, + FT_UInt left, + FT_UInt right, + FT_Vector *avector ); + + + /************************************************************************** + * + * @function: + * FT_Get_PFR_Advance + * + * @description: + * Return a given glyph advance, expressed in original metrics units, + * from a PFR font. + * + * @input: + * face :: + * A handle to the input face. + * + * gindex :: + * The glyph index. + * + * @output: + * aadvance :: + * The glyph advance in metrics units. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * You can use the `x_scale` or `y_scale` results of @FT_Get_PFR_Metrics + * to convert the advance to device subpixels (i.e., 1/64 of pixels). + */ + FT_EXPORT( FT_Error ) + FT_Get_PFR_Advance( FT_Face face, + FT_UInt gindex, + FT_Pos *aadvance ); + + /* */ + + +FT_END_HEADER + +#endif /* FTPFR_H_ */ + + +/* END */ diff --git a/dependencies/linux64/include/freetype2/freetype/ftrender.h b/dependencies/linux64/include/freetype2/freetype/ftrender.h new file mode 100644 index 0000000..dc5018a --- /dev/null +++ b/dependencies/linux64/include/freetype2/freetype/ftrender.h @@ -0,0 +1,244 @@ +/**************************************************************************** + * + * ftrender.h + * + * FreeType renderer modules public interface (specification). + * + * Copyright (C) 1996-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + +#ifndef FTRENDER_H_ +#define FTRENDER_H_ + + +#include +#include + + +FT_BEGIN_HEADER + + + /************************************************************************** + * + * @section: + * module_management + * + */ + + + /* create a new glyph object */ + typedef FT_Error + (*FT_Glyph_InitFunc)( FT_Glyph glyph, + FT_GlyphSlot slot ); + + /* destroys a given glyph object */ + typedef void + (*FT_Glyph_DoneFunc)( FT_Glyph glyph ); + + typedef void + (*FT_Glyph_TransformFunc)( FT_Glyph glyph, + const FT_Matrix* matrix, + const FT_Vector* delta ); + + typedef void + (*FT_Glyph_GetBBoxFunc)( FT_Glyph glyph, + FT_BBox* abbox ); + + typedef FT_Error + (*FT_Glyph_CopyFunc)( FT_Glyph source, + FT_Glyph target ); + + typedef FT_Error + (*FT_Glyph_PrepareFunc)( FT_Glyph glyph, + FT_GlyphSlot slot ); + +/* deprecated */ +#define FT_Glyph_Init_Func FT_Glyph_InitFunc +#define FT_Glyph_Done_Func FT_Glyph_DoneFunc +#define FT_Glyph_Transform_Func FT_Glyph_TransformFunc +#define FT_Glyph_BBox_Func FT_Glyph_GetBBoxFunc +#define FT_Glyph_Copy_Func FT_Glyph_CopyFunc +#define FT_Glyph_Prepare_Func FT_Glyph_PrepareFunc + + + struct FT_Glyph_Class_ + { + FT_Long glyph_size; + FT_Glyph_Format glyph_format; + + FT_Glyph_InitFunc glyph_init; + FT_Glyph_DoneFunc glyph_done; + FT_Glyph_CopyFunc glyph_copy; + FT_Glyph_TransformFunc glyph_transform; + FT_Glyph_GetBBoxFunc glyph_bbox; + FT_Glyph_PrepareFunc glyph_prepare; + }; + + + typedef FT_Error + (*FT_Renderer_RenderFunc)( FT_Renderer renderer, + FT_GlyphSlot slot, + FT_Render_Mode mode, + const FT_Vector* origin ); + + typedef FT_Error + (*FT_Renderer_TransformFunc)( FT_Renderer renderer, + FT_GlyphSlot slot, + const FT_Matrix* matrix, + const FT_Vector* delta ); + + + typedef void + (*FT_Renderer_GetCBoxFunc)( FT_Renderer renderer, + FT_GlyphSlot slot, + FT_BBox* cbox ); + + + typedef FT_Error + (*FT_Renderer_SetModeFunc)( FT_Renderer renderer, + FT_ULong mode_tag, + FT_Pointer mode_ptr ); + +/* deprecated identifiers */ +#define FTRenderer_render FT_Renderer_RenderFunc +#define FTRenderer_transform FT_Renderer_TransformFunc +#define FTRenderer_getCBox FT_Renderer_GetCBoxFunc +#define FTRenderer_setMode FT_Renderer_SetModeFunc + + + /************************************************************************** + * + * @struct: + * FT_Renderer_Class + * + * @description: + * The renderer module class descriptor. + * + * @fields: + * root :: + * The root @FT_Module_Class fields. + * + * glyph_format :: + * The glyph image format this renderer handles. + * + * render_glyph :: + * A method used to render the image that is in a given glyph slot into + * a bitmap. + * + * transform_glyph :: + * A method used to transform the image that is in a given glyph slot. + * + * get_glyph_cbox :: + * A method used to access the glyph's cbox. + * + * set_mode :: + * A method used to pass additional parameters. + * + * raster_class :: + * For @FT_GLYPH_FORMAT_OUTLINE renderers only. This is a pointer to + * its raster's class. + */ + typedef struct FT_Renderer_Class_ + { + FT_Module_Class root; + + FT_Glyph_Format glyph_format; + + FT_Renderer_RenderFunc render_glyph; + FT_Renderer_TransformFunc transform_glyph; + FT_Renderer_GetCBoxFunc get_glyph_cbox; + FT_Renderer_SetModeFunc set_mode; + + const FT_Raster_Funcs* raster_class; + + } FT_Renderer_Class; + + + /************************************************************************** + * + * @function: + * FT_Get_Renderer + * + * @description: + * Retrieve the current renderer for a given glyph format. + * + * @input: + * library :: + * A handle to the library object. + * + * format :: + * The glyph format. + * + * @return: + * A renderer handle. 0~if none found. + * + * @note: + * An error will be returned if a module already exists by that name, or + * if the module requires a version of FreeType that is too great. + * + * To add a new renderer, simply use @FT_Add_Module. To retrieve a + * renderer by its name, use @FT_Get_Module. + */ + FT_EXPORT( FT_Renderer ) + FT_Get_Renderer( FT_Library library, + FT_Glyph_Format format ); + + + /************************************************************************** + * + * @function: + * FT_Set_Renderer + * + * @description: + * Set the current renderer to use, and set additional mode. + * + * @inout: + * library :: + * A handle to the library object. + * + * @input: + * renderer :: + * A handle to the renderer object. + * + * num_params :: + * The number of additional parameters. + * + * parameters :: + * Additional parameters. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * In case of success, the renderer will be used to convert glyph images + * in the renderer's known format into bitmaps. + * + * This doesn't change the current renderer for other formats. + * + * Currently, no FreeType renderer module uses `parameters`; you should + * thus always pass `NULL` as the value. + */ + FT_EXPORT( FT_Error ) + FT_Set_Renderer( FT_Library library, + FT_Renderer renderer, + FT_UInt num_params, + FT_Parameter* parameters ); + + /* */ + + +FT_END_HEADER + +#endif /* FTRENDER_H_ */ + + +/* END */ diff --git a/dependencies/linux64/include/freetype2/freetype/ftsizes.h b/dependencies/linux64/include/freetype2/freetype/ftsizes.h new file mode 100644 index 0000000..4ef5c79 --- /dev/null +++ b/dependencies/linux64/include/freetype2/freetype/ftsizes.h @@ -0,0 +1,159 @@ +/**************************************************************************** + * + * ftsizes.h + * + * FreeType size objects management (specification). + * + * Copyright (C) 1996-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + + /************************************************************************** + * + * Typical application would normally not need to use these functions. + * However, they have been placed in a public API for the rare cases where + * they are needed. + * + */ + + +#ifndef FTSIZES_H_ +#define FTSIZES_H_ + + +#include + +#ifdef FREETYPE_H +#error "freetype.h of FreeType 1 has been loaded!" +#error "Please fix the directory search order for header files" +#error "so that freetype.h of FreeType 2 is found first." +#endif + + +FT_BEGIN_HEADER + + + /************************************************************************** + * + * @section: + * sizes_management + * + * @title: + * Size Management + * + * @abstract: + * Managing multiple sizes per face. + * + * @description: + * When creating a new face object (e.g., with @FT_New_Face), an @FT_Size + * object is automatically created and used to store all pixel-size + * dependent information, available in the `face->size` field. + * + * It is however possible to create more sizes for a given face, mostly + * in order to manage several character pixel sizes of the same font + * family and style. See @FT_New_Size and @FT_Done_Size. + * + * Note that @FT_Set_Pixel_Sizes and @FT_Set_Char_Size only modify the + * contents of the current 'active' size; you thus need to use + * @FT_Activate_Size to change it. + * + * 99% of applications won't need the functions provided here, especially + * if they use the caching sub-system, so be cautious when using these. + * + */ + + + /************************************************************************** + * + * @function: + * FT_New_Size + * + * @description: + * Create a new size object from a given face object. + * + * @input: + * face :: + * A handle to a parent face object. + * + * @output: + * asize :: + * A handle to a new size object. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * You need to call @FT_Activate_Size in order to select the new size for + * upcoming calls to @FT_Set_Pixel_Sizes, @FT_Set_Char_Size, + * @FT_Load_Glyph, @FT_Load_Char, etc. + */ + FT_EXPORT( FT_Error ) + FT_New_Size( FT_Face face, + FT_Size* size ); + + + /************************************************************************** + * + * @function: + * FT_Done_Size + * + * @description: + * Discard a given size object. Note that @FT_Done_Face automatically + * discards all size objects allocated with @FT_New_Size. + * + * @input: + * size :: + * A handle to a target size object. + * + * @return: + * FreeType error code. 0~means success. + */ + FT_EXPORT( FT_Error ) + FT_Done_Size( FT_Size size ); + + + /************************************************************************** + * + * @function: + * FT_Activate_Size + * + * @description: + * Even though it is possible to create several size objects for a given + * face (see @FT_New_Size for details), functions like @FT_Load_Glyph or + * @FT_Load_Char only use the one that has been activated last to + * determine the 'current character pixel size'. + * + * This function can be used to 'activate' a previously created size + * object. + * + * @input: + * size :: + * A handle to a target size object. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * If `face` is the size's parent face object, this function changes the + * value of `face->size` to the input size handle. + */ + FT_EXPORT( FT_Error ) + FT_Activate_Size( FT_Size size ); + + /* */ + + +FT_END_HEADER + +#endif /* FTSIZES_H_ */ + + +/* END */ diff --git a/dependencies/linux64/include/freetype2/freetype/ftsnames.h b/dependencies/linux64/include/freetype2/freetype/ftsnames.h new file mode 100644 index 0000000..d5d5cd9 --- /dev/null +++ b/dependencies/linux64/include/freetype2/freetype/ftsnames.h @@ -0,0 +1,272 @@ +/**************************************************************************** + * + * ftsnames.h + * + * Simple interface to access SFNT 'name' tables (which are used + * to hold font names, copyright info, notices, etc.) (specification). + * + * This is _not_ used to retrieve glyph names! + * + * Copyright (C) 1996-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + +#ifndef FTSNAMES_H_ +#define FTSNAMES_H_ + + +#include +#include + +#ifdef FREETYPE_H +#error "freetype.h of FreeType 1 has been loaded!" +#error "Please fix the directory search order for header files" +#error "so that freetype.h of FreeType 2 is found first." +#endif + + +FT_BEGIN_HEADER + + + /************************************************************************** + * + * @section: + * sfnt_names + * + * @title: + * SFNT Names + * + * @abstract: + * Access the names embedded in TrueType and OpenType files. + * + * @description: + * The TrueType and OpenType specifications allow the inclusion of a + * special names table ('name') in font files. This table contains + * textual (and internationalized) information regarding the font, like + * family name, copyright, version, etc. + * + * The definitions below are used to access them if available. + * + * Note that this has nothing to do with glyph names! + * + */ + + + /************************************************************************** + * + * @struct: + * FT_SfntName + * + * @description: + * A structure used to model an SFNT 'name' table entry. + * + * @fields: + * platform_id :: + * The platform ID for `string`. See @TT_PLATFORM_XXX for possible + * values. + * + * encoding_id :: + * The encoding ID for `string`. See @TT_APPLE_ID_XXX, @TT_MAC_ID_XXX, + * @TT_ISO_ID_XXX, @TT_MS_ID_XXX, and @TT_ADOBE_ID_XXX for possible + * values. + * + * language_id :: + * The language ID for `string`. See @TT_MAC_LANGID_XXX and + * @TT_MS_LANGID_XXX for possible values. + * + * Registered OpenType values for `language_id` are always smaller than + * 0x8000; values equal or larger than 0x8000 usually indicate a + * language tag string (introduced in OpenType version 1.6). Use + * function @FT_Get_Sfnt_LangTag with `language_id` as its argument to + * retrieve the associated language tag. + * + * name_id :: + * An identifier for `string`. See @TT_NAME_ID_XXX for possible + * values. + * + * string :: + * The 'name' string. Note that its format differs depending on the + * (platform,encoding) pair, being either a string of bytes (without a + * terminating `NULL` byte) or containing UTF-16BE entities. + * + * string_len :: + * The length of `string` in bytes. + * + * @note: + * Please refer to the TrueType or OpenType specification for more + * details. + */ + typedef struct FT_SfntName_ + { + FT_UShort platform_id; + FT_UShort encoding_id; + FT_UShort language_id; + FT_UShort name_id; + + FT_Byte* string; /* this string is *not* null-terminated! */ + FT_UInt string_len; /* in bytes */ + + } FT_SfntName; + + + /************************************************************************** + * + * @function: + * FT_Get_Sfnt_Name_Count + * + * @description: + * Retrieve the number of name strings in the SFNT 'name' table. + * + * @input: + * face :: + * A handle to the source face. + * + * @return: + * The number of strings in the 'name' table. + * + * @note: + * This function always returns an error if the config macro + * `TT_CONFIG_OPTION_SFNT_NAMES` is not defined in `ftoption.h`. + */ + FT_EXPORT( FT_UInt ) + FT_Get_Sfnt_Name_Count( FT_Face face ); + + + /************************************************************************** + * + * @function: + * FT_Get_Sfnt_Name + * + * @description: + * Retrieve a string of the SFNT 'name' table for a given index. + * + * @input: + * face :: + * A handle to the source face. + * + * idx :: + * The index of the 'name' string. + * + * @output: + * aname :: + * The indexed @FT_SfntName structure. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * The `string` array returned in the `aname` structure is not + * null-terminated. Note that you don't have to deallocate `string` by + * yourself; FreeType takes care of it if you call @FT_Done_Face. + * + * Use @FT_Get_Sfnt_Name_Count to get the total number of available + * 'name' table entries, then do a loop until you get the right platform, + * encoding, and name ID. + * + * 'name' table format~1 entries can use language tags also, see + * @FT_Get_Sfnt_LangTag. + * + * This function always returns an error if the config macro + * `TT_CONFIG_OPTION_SFNT_NAMES` is not defined in `ftoption.h`. + */ + FT_EXPORT( FT_Error ) + FT_Get_Sfnt_Name( FT_Face face, + FT_UInt idx, + FT_SfntName *aname ); + + + /************************************************************************** + * + * @struct: + * FT_SfntLangTag + * + * @description: + * A structure to model a language tag entry from an SFNT 'name' table. + * + * @fields: + * string :: + * The language tag string, encoded in UTF-16BE (without trailing + * `NULL` bytes). + * + * string_len :: + * The length of `string` in **bytes**. + * + * @note: + * Please refer to the TrueType or OpenType specification for more + * details. + * + * @since: + * 2.8 + */ + typedef struct FT_SfntLangTag_ + { + FT_Byte* string; /* this string is *not* null-terminated! */ + FT_UInt string_len; /* in bytes */ + + } FT_SfntLangTag; + + + /************************************************************************** + * + * @function: + * FT_Get_Sfnt_LangTag + * + * @description: + * Retrieve the language tag associated with a language ID of an SFNT + * 'name' table entry. + * + * @input: + * face :: + * A handle to the source face. + * + * langID :: + * The language ID, as returned by @FT_Get_Sfnt_Name. This is always a + * value larger than 0x8000. + * + * @output: + * alangTag :: + * The language tag associated with the 'name' table entry's language + * ID. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * The `string` array returned in the `alangTag` structure is not + * null-terminated. Note that you don't have to deallocate `string` by + * yourself; FreeType takes care of it if you call @FT_Done_Face. + * + * Only 'name' table format~1 supports language tags. For format~0 + * tables, this function always returns FT_Err_Invalid_Table. For + * invalid format~1 language ID values, FT_Err_Invalid_Argument is + * returned. + * + * This function always returns an error if the config macro + * `TT_CONFIG_OPTION_SFNT_NAMES` is not defined in `ftoption.h`. + * + * @since: + * 2.8 + */ + FT_EXPORT( FT_Error ) + FT_Get_Sfnt_LangTag( FT_Face face, + FT_UInt langID, + FT_SfntLangTag *alangTag ); + + + /* */ + + +FT_END_HEADER + +#endif /* FTSNAMES_H_ */ + + +/* END */ diff --git a/dependencies/linux64/include/freetype2/freetype/ftstroke.h b/dependencies/linux64/include/freetype2/freetype/ftstroke.h new file mode 100644 index 0000000..41626dc --- /dev/null +++ b/dependencies/linux64/include/freetype2/freetype/ftstroke.h @@ -0,0 +1,773 @@ +/**************************************************************************** + * + * ftstroke.h + * + * FreeType path stroker (specification). + * + * Copyright (C) 2002-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + +#ifndef FTSTROKE_H_ +#define FTSTROKE_H_ + +#include +#include + + +FT_BEGIN_HEADER + + + /************************************************************************** + * + * @section: + * glyph_stroker + * + * @title: + * Glyph Stroker + * + * @abstract: + * Generating bordered and stroked glyphs. + * + * @description: + * This component generates stroked outlines of a given vectorial glyph. + * It also allows you to retrieve the 'outside' and/or the 'inside' + * borders of the stroke. + * + * This can be useful to generate 'bordered' glyph, i.e., glyphs + * displayed with a colored (and anti-aliased) border around their + * shape. + * + * @order: + * FT_Stroker + * + * FT_Stroker_LineJoin + * FT_Stroker_LineCap + * FT_StrokerBorder + * + * FT_Outline_GetInsideBorder + * FT_Outline_GetOutsideBorder + * + * FT_Glyph_Stroke + * FT_Glyph_StrokeBorder + * + * FT_Stroker_New + * FT_Stroker_Set + * FT_Stroker_Rewind + * FT_Stroker_ParseOutline + * FT_Stroker_Done + * + * FT_Stroker_BeginSubPath + * FT_Stroker_EndSubPath + * + * FT_Stroker_LineTo + * FT_Stroker_ConicTo + * FT_Stroker_CubicTo + * + * FT_Stroker_GetBorderCounts + * FT_Stroker_ExportBorder + * FT_Stroker_GetCounts + * FT_Stroker_Export + * + */ + + + /************************************************************************** + * + * @type: + * FT_Stroker + * + * @description: + * Opaque handle to a path stroker object. + */ + typedef struct FT_StrokerRec_* FT_Stroker; + + + /************************************************************************** + * + * @enum: + * FT_Stroker_LineJoin + * + * @description: + * These values determine how two joining lines are rendered in a + * stroker. + * + * @values: + * FT_STROKER_LINEJOIN_ROUND :: + * Used to render rounded line joins. Circular arcs are used to join + * two lines smoothly. + * + * FT_STROKER_LINEJOIN_BEVEL :: + * Used to render beveled line joins. The outer corner of the joined + * lines is filled by enclosing the triangular region of the corner + * with a straight line between the outer corners of each stroke. + * + * FT_STROKER_LINEJOIN_MITER_FIXED :: + * Used to render mitered line joins, with fixed bevels if the miter + * limit is exceeded. The outer edges of the strokes for the two + * segments are extended until they meet at an angle. A bevel join + * (see above) is used if the segments meet at too sharp an angle and + * the outer edges meet beyond a distance corresponding to the meter + * limit. This prevents long spikes being created. + * `FT_STROKER_LINEJOIN_MITER_FIXED` generates a miter line join as + * used in PostScript and PDF. + * + * FT_STROKER_LINEJOIN_MITER_VARIABLE :: + * FT_STROKER_LINEJOIN_MITER :: + * Used to render mitered line joins, with variable bevels if the miter + * limit is exceeded. The intersection of the strokes is clipped + * perpendicularly to the bisector, at a distance corresponding to + * the miter limit. This prevents long spikes being created. + * `FT_STROKER_LINEJOIN_MITER_VARIABLE` generates a mitered line join + * as used in XPS. `FT_STROKER_LINEJOIN_MITER` is an alias for + * `FT_STROKER_LINEJOIN_MITER_VARIABLE`, retained for backward + * compatibility. + */ + typedef enum FT_Stroker_LineJoin_ + { + FT_STROKER_LINEJOIN_ROUND = 0, + FT_STROKER_LINEJOIN_BEVEL = 1, + FT_STROKER_LINEJOIN_MITER_VARIABLE = 2, + FT_STROKER_LINEJOIN_MITER = FT_STROKER_LINEJOIN_MITER_VARIABLE, + FT_STROKER_LINEJOIN_MITER_FIXED = 3 + + } FT_Stroker_LineJoin; + + + /************************************************************************** + * + * @enum: + * FT_Stroker_LineCap + * + * @description: + * These values determine how the end of opened sub-paths are rendered in + * a stroke. + * + * @values: + * FT_STROKER_LINECAP_BUTT :: + * The end of lines is rendered as a full stop on the last point + * itself. + * + * FT_STROKER_LINECAP_ROUND :: + * The end of lines is rendered as a half-circle around the last point. + * + * FT_STROKER_LINECAP_SQUARE :: + * The end of lines is rendered as a square around the last point. + */ + typedef enum FT_Stroker_LineCap_ + { + FT_STROKER_LINECAP_BUTT = 0, + FT_STROKER_LINECAP_ROUND, + FT_STROKER_LINECAP_SQUARE + + } FT_Stroker_LineCap; + + + /************************************************************************** + * + * @enum: + * FT_StrokerBorder + * + * @description: + * These values are used to select a given stroke border in + * @FT_Stroker_GetBorderCounts and @FT_Stroker_ExportBorder. + * + * @values: + * FT_STROKER_BORDER_LEFT :: + * Select the left border, relative to the drawing direction. + * + * FT_STROKER_BORDER_RIGHT :: + * Select the right border, relative to the drawing direction. + * + * @note: + * Applications are generally interested in the 'inside' and 'outside' + * borders. However, there is no direct mapping between these and the + * 'left' and 'right' ones, since this really depends on the glyph's + * drawing orientation, which varies between font formats. + * + * You can however use @FT_Outline_GetInsideBorder and + * @FT_Outline_GetOutsideBorder to get these. + */ + typedef enum FT_StrokerBorder_ + { + FT_STROKER_BORDER_LEFT = 0, + FT_STROKER_BORDER_RIGHT + + } FT_StrokerBorder; + + + /************************************************************************** + * + * @function: + * FT_Outline_GetInsideBorder + * + * @description: + * Retrieve the @FT_StrokerBorder value corresponding to the 'inside' + * borders of a given outline. + * + * @input: + * outline :: + * The source outline handle. + * + * @return: + * The border index. @FT_STROKER_BORDER_RIGHT for empty or invalid + * outlines. + */ + FT_EXPORT( FT_StrokerBorder ) + FT_Outline_GetInsideBorder( FT_Outline* outline ); + + + /************************************************************************** + * + * @function: + * FT_Outline_GetOutsideBorder + * + * @description: + * Retrieve the @FT_StrokerBorder value corresponding to the 'outside' + * borders of a given outline. + * + * @input: + * outline :: + * The source outline handle. + * + * @return: + * The border index. @FT_STROKER_BORDER_LEFT for empty or invalid + * outlines. + */ + FT_EXPORT( FT_StrokerBorder ) + FT_Outline_GetOutsideBorder( FT_Outline* outline ); + + + /************************************************************************** + * + * @function: + * FT_Stroker_New + * + * @description: + * Create a new stroker object. + * + * @input: + * library :: + * FreeType library handle. + * + * @output: + * astroker :: + * A new stroker object handle. `NULL` in case of error. + * + * @return: + * FreeType error code. 0~means success. + */ + FT_EXPORT( FT_Error ) + FT_Stroker_New( FT_Library library, + FT_Stroker *astroker ); + + + /************************************************************************** + * + * @function: + * FT_Stroker_Set + * + * @description: + * Reset a stroker object's attributes. + * + * @input: + * stroker :: + * The target stroker handle. + * + * radius :: + * The border radius. + * + * line_cap :: + * The line cap style. + * + * line_join :: + * The line join style. + * + * miter_limit :: + * The maximum reciprocal sine of half-angle at the miter join, + * expressed as 16.16 fixed-point value. + * + * @note: + * The `radius` is expressed in the same units as the outline + * coordinates. + * + * The `miter_limit` multiplied by the `radius` gives the maximum size + * of a miter spike, at which it is clipped for + * @FT_STROKER_LINEJOIN_MITER_VARIABLE or replaced with a bevel join for + * @FT_STROKER_LINEJOIN_MITER_FIXED. + * + * This function calls @FT_Stroker_Rewind automatically. + */ + FT_EXPORT( void ) + FT_Stroker_Set( FT_Stroker stroker, + FT_Fixed radius, + FT_Stroker_LineCap line_cap, + FT_Stroker_LineJoin line_join, + FT_Fixed miter_limit ); + + + /************************************************************************** + * + * @function: + * FT_Stroker_Rewind + * + * @description: + * Reset a stroker object without changing its attributes. You should + * call this function before beginning a new series of calls to + * @FT_Stroker_BeginSubPath or @FT_Stroker_EndSubPath. + * + * @input: + * stroker :: + * The target stroker handle. + */ + FT_EXPORT( void ) + FT_Stroker_Rewind( FT_Stroker stroker ); + + + /************************************************************************** + * + * @function: + * FT_Stroker_ParseOutline + * + * @description: + * A convenience function used to parse a whole outline with the stroker. + * The resulting outline(s) can be retrieved later by functions like + * @FT_Stroker_GetCounts and @FT_Stroker_Export. + * + * @input: + * stroker :: + * The target stroker handle. + * + * outline :: + * The source outline. + * + * opened :: + * A boolean. If~1, the outline is treated as an open path instead of + * a closed one. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * If `opened` is~0 (the default), the outline is treated as a closed + * path, and the stroker generates two distinct 'border' outlines. + * + * If `opened` is~1, the outline is processed as an open path, and the + * stroker generates a single 'stroke' outline. + * + * This function calls @FT_Stroker_Rewind automatically. + */ + FT_EXPORT( FT_Error ) + FT_Stroker_ParseOutline( FT_Stroker stroker, + FT_Outline* outline, + FT_Bool opened ); + + + /************************************************************************** + * + * @function: + * FT_Stroker_BeginSubPath + * + * @description: + * Start a new sub-path in the stroker. + * + * @input: + * stroker :: + * The target stroker handle. + * + * to :: + * A pointer to the start vector. + * + * open :: + * A boolean. If~1, the sub-path is treated as an open one. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * This function is useful when you need to stroke a path that is not + * stored as an @FT_Outline object. + */ + FT_EXPORT( FT_Error ) + FT_Stroker_BeginSubPath( FT_Stroker stroker, + FT_Vector* to, + FT_Bool open ); + + + /************************************************************************** + * + * @function: + * FT_Stroker_EndSubPath + * + * @description: + * Close the current sub-path in the stroker. + * + * @input: + * stroker :: + * The target stroker handle. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * You should call this function after @FT_Stroker_BeginSubPath. If the + * subpath was not 'opened', this function 'draws' a single line segment + * to the start position when needed. + */ + FT_EXPORT( FT_Error ) + FT_Stroker_EndSubPath( FT_Stroker stroker ); + + + /************************************************************************** + * + * @function: + * FT_Stroker_LineTo + * + * @description: + * 'Draw' a single line segment in the stroker's current sub-path, from + * the last position. + * + * @input: + * stroker :: + * The target stroker handle. + * + * to :: + * A pointer to the destination point. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * You should call this function between @FT_Stroker_BeginSubPath and + * @FT_Stroker_EndSubPath. + */ + FT_EXPORT( FT_Error ) + FT_Stroker_LineTo( FT_Stroker stroker, + FT_Vector* to ); + + + /************************************************************************** + * + * @function: + * FT_Stroker_ConicTo + * + * @description: + * 'Draw' a single quadratic Bezier in the stroker's current sub-path, + * from the last position. + * + * @input: + * stroker :: + * The target stroker handle. + * + * control :: + * A pointer to a Bezier control point. + * + * to :: + * A pointer to the destination point. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * You should call this function between @FT_Stroker_BeginSubPath and + * @FT_Stroker_EndSubPath. + */ + FT_EXPORT( FT_Error ) + FT_Stroker_ConicTo( FT_Stroker stroker, + FT_Vector* control, + FT_Vector* to ); + + + /************************************************************************** + * + * @function: + * FT_Stroker_CubicTo + * + * @description: + * 'Draw' a single cubic Bezier in the stroker's current sub-path, from + * the last position. + * + * @input: + * stroker :: + * The target stroker handle. + * + * control1 :: + * A pointer to the first Bezier control point. + * + * control2 :: + * A pointer to second Bezier control point. + * + * to :: + * A pointer to the destination point. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * You should call this function between @FT_Stroker_BeginSubPath and + * @FT_Stroker_EndSubPath. + */ + FT_EXPORT( FT_Error ) + FT_Stroker_CubicTo( FT_Stroker stroker, + FT_Vector* control1, + FT_Vector* control2, + FT_Vector* to ); + + + /************************************************************************** + * + * @function: + * FT_Stroker_GetBorderCounts + * + * @description: + * Call this function once you have finished parsing your paths with the + * stroker. It returns the number of points and contours necessary to + * export one of the 'border' or 'stroke' outlines generated by the + * stroker. + * + * @input: + * stroker :: + * The target stroker handle. + * + * border :: + * The border index. + * + * @output: + * anum_points :: + * The number of points. + * + * anum_contours :: + * The number of contours. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * When an outline, or a sub-path, is 'closed', the stroker generates two + * independent 'border' outlines, named 'left' and 'right'. + * + * When the outline, or a sub-path, is 'opened', the stroker merges the + * 'border' outlines with caps. The 'left' border receives all points, + * while the 'right' border becomes empty. + * + * Use the function @FT_Stroker_GetCounts instead if you want to retrieve + * the counts associated to both borders. + */ + FT_EXPORT( FT_Error ) + FT_Stroker_GetBorderCounts( FT_Stroker stroker, + FT_StrokerBorder border, + FT_UInt *anum_points, + FT_UInt *anum_contours ); + + + /************************************************************************** + * + * @function: + * FT_Stroker_ExportBorder + * + * @description: + * Call this function after @FT_Stroker_GetBorderCounts to export the + * corresponding border to your own @FT_Outline structure. + * + * Note that this function appends the border points and contours to your + * outline, but does not try to resize its arrays. + * + * @input: + * stroker :: + * The target stroker handle. + * + * border :: + * The border index. + * + * outline :: + * The target outline handle. + * + * @note: + * Always call this function after @FT_Stroker_GetBorderCounts to get + * sure that there is enough room in your @FT_Outline object to receive + * all new data. + * + * When an outline, or a sub-path, is 'closed', the stroker generates two + * independent 'border' outlines, named 'left' and 'right'. + * + * When the outline, or a sub-path, is 'opened', the stroker merges the + * 'border' outlines with caps. The 'left' border receives all points, + * while the 'right' border becomes empty. + * + * Use the function @FT_Stroker_Export instead if you want to retrieve + * all borders at once. + */ + FT_EXPORT( void ) + FT_Stroker_ExportBorder( FT_Stroker stroker, + FT_StrokerBorder border, + FT_Outline* outline ); + + + /************************************************************************** + * + * @function: + * FT_Stroker_GetCounts + * + * @description: + * Call this function once you have finished parsing your paths with the + * stroker. It returns the number of points and contours necessary to + * export all points/borders from the stroked outline/path. + * + * @input: + * stroker :: + * The target stroker handle. + * + * @output: + * anum_points :: + * The number of points. + * + * anum_contours :: + * The number of contours. + * + * @return: + * FreeType error code. 0~means success. + */ + FT_EXPORT( FT_Error ) + FT_Stroker_GetCounts( FT_Stroker stroker, + FT_UInt *anum_points, + FT_UInt *anum_contours ); + + + /************************************************************************** + * + * @function: + * FT_Stroker_Export + * + * @description: + * Call this function after @FT_Stroker_GetBorderCounts to export all + * borders to your own @FT_Outline structure. + * + * Note that this function appends the border points and contours to your + * outline, but does not try to resize its arrays. + * + * @input: + * stroker :: + * The target stroker handle. + * + * outline :: + * The target outline handle. + */ + FT_EXPORT( void ) + FT_Stroker_Export( FT_Stroker stroker, + FT_Outline* outline ); + + + /************************************************************************** + * + * @function: + * FT_Stroker_Done + * + * @description: + * Destroy a stroker object. + * + * @input: + * stroker :: + * A stroker handle. Can be `NULL`. + */ + FT_EXPORT( void ) + FT_Stroker_Done( FT_Stroker stroker ); + + + /************************************************************************** + * + * @function: + * FT_Glyph_Stroke + * + * @description: + * Stroke a given outline glyph object with a given stroker. + * + * @inout: + * pglyph :: + * Source glyph handle on input, new glyph handle on output. + * + * @input: + * stroker :: + * A stroker handle. + * + * destroy :: + * A Boolean. If~1, the source glyph object is destroyed on success. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * The source glyph is untouched in case of error. + * + * Adding stroke may yield a significantly wider and taller glyph + * depending on how large of a radius was used to stroke the glyph. You + * may need to manually adjust horizontal and vertical advance amounts to + * account for this added size. + */ + FT_EXPORT( FT_Error ) + FT_Glyph_Stroke( FT_Glyph *pglyph, + FT_Stroker stroker, + FT_Bool destroy ); + + + /************************************************************************** + * + * @function: + * FT_Glyph_StrokeBorder + * + * @description: + * Stroke a given outline glyph object with a given stroker, but only + * return either its inside or outside border. + * + * @inout: + * pglyph :: + * Source glyph handle on input, new glyph handle on output. + * + * @input: + * stroker :: + * A stroker handle. + * + * inside :: + * A Boolean. If~1, return the inside border, otherwise the outside + * border. + * + * destroy :: + * A Boolean. If~1, the source glyph object is destroyed on success. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * The source glyph is untouched in case of error. + * + * Adding stroke may yield a significantly wider and taller glyph + * depending on how large of a radius was used to stroke the glyph. You + * may need to manually adjust horizontal and vertical advance amounts to + * account for this added size. + */ + FT_EXPORT( FT_Error ) + FT_Glyph_StrokeBorder( FT_Glyph *pglyph, + FT_Stroker stroker, + FT_Bool inside, + FT_Bool destroy ); + + /* */ + +FT_END_HEADER + +#endif /* FTSTROKE_H_ */ + + +/* END */ + + +/* Local Variables: */ +/* coding: utf-8 */ +/* End: */ diff --git a/dependencies/linux64/include/freetype2/freetype/ftsynth.h b/dependencies/linux64/include/freetype2/freetype/ftsynth.h new file mode 100644 index 0000000..43081b6 --- /dev/null +++ b/dependencies/linux64/include/freetype2/freetype/ftsynth.h @@ -0,0 +1,104 @@ +/**************************************************************************** + * + * ftsynth.h + * + * FreeType synthesizing code for emboldening and slanting + * (specification). + * + * Copyright (C) 2000-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + + /*************************************************************************/ + /*************************************************************************/ + /*************************************************************************/ + /*************************************************************************/ + /*************************************************************************/ + /********* *********/ + /********* WARNING, THIS IS ALPHA CODE! THIS API *********/ + /********* IS DUE TO CHANGE UNTIL STRICTLY NOTIFIED BY THE *********/ + /********* FREETYPE DEVELOPMENT TEAM *********/ + /********* *********/ + /*************************************************************************/ + /*************************************************************************/ + /*************************************************************************/ + /*************************************************************************/ + /*************************************************************************/ + + + /* Main reason for not lifting the functions in this module to a */ + /* 'standard' API is that the used parameters for emboldening and */ + /* slanting are not configurable. Consider the functions as a */ + /* code resource that should be copied into the application and */ + /* adapted to the particular needs. */ + + +#ifndef FTSYNTH_H_ +#define FTSYNTH_H_ + + +#include + +#ifdef FREETYPE_H +#error "freetype.h of FreeType 1 has been loaded!" +#error "Please fix the directory search order for header files" +#error "so that freetype.h of FreeType 2 is found first." +#endif + + +FT_BEGIN_HEADER + + /* Embolden a glyph by a 'reasonable' value (which is highly a matter of */ + /* taste). This function is actually a convenience function, providing */ + /* a wrapper for @FT_Outline_Embolden and @FT_Bitmap_Embolden. */ + /* */ + /* For emboldened outlines the height, width, and advance metrics are */ + /* increased by the strength of the emboldening -- this even affects */ + /* mono-width fonts! */ + /* */ + /* You can also call @FT_Outline_Get_CBox to get precise values. */ + FT_EXPORT( void ) + FT_GlyphSlot_Embolden( FT_GlyphSlot slot ); + + /* Precisely adjust the glyph weight either horizontally or vertically. */ + /* The `xdelta` and `ydelta` values are fractions of the face Em size */ + /* (in fixed-point format). Considering that a regular face would have */ + /* stem widths on the order of 0.1 Em, a delta of 0.05 (0x0CCC) should */ + /* be very noticeable. To increase or decrease the weight, use positive */ + /* or negative values, respectively. */ + FT_EXPORT( void ) + FT_GlyphSlot_AdjustWeight( FT_GlyphSlot slot, + FT_Fixed xdelta, + FT_Fixed ydelta ); + + + /* Slant an outline glyph to the right by about 12 degrees. */ + FT_EXPORT( void ) + FT_GlyphSlot_Oblique( FT_GlyphSlot slot ); + + /* Slant an outline glyph by a given sine of an angle. You can apply */ + /* slant along either x- or y-axis by choosing a corresponding non-zero */ + /* argument. If both slants are non-zero, some affine transformation */ + /* will result. */ + FT_EXPORT( void ) + FT_GlyphSlot_Slant( FT_GlyphSlot slot, + FT_Fixed xslant, + FT_Fixed yslant ); + + /* */ + + +FT_END_HEADER + +#endif /* FTSYNTH_H_ */ + + +/* END */ diff --git a/dependencies/linux64/include/freetype2/freetype/ftsystem.h b/dependencies/linux64/include/freetype2/freetype/ftsystem.h new file mode 100644 index 0000000..1eacb3a --- /dev/null +++ b/dependencies/linux64/include/freetype2/freetype/ftsystem.h @@ -0,0 +1,350 @@ +/**************************************************************************** + * + * ftsystem.h + * + * FreeType low-level system interface definition (specification). + * + * Copyright (C) 1996-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + +#ifndef FTSYSTEM_H_ +#define FTSYSTEM_H_ + + + + +FT_BEGIN_HEADER + + + /************************************************************************** + * + * @section: + * system_interface + * + * @title: + * System Interface + * + * @abstract: + * How FreeType manages memory and i/o. + * + * @description: + * This section contains various definitions related to memory management + * and i/o access. You need to understand this information if you want to + * use a custom memory manager or you own i/o streams. + * + */ + + + /************************************************************************** + * + * M E M O R Y M A N A G E M E N T + * + */ + + + /************************************************************************** + * + * @type: + * FT_Memory + * + * @description: + * A handle to a given memory manager object, defined with an + * @FT_MemoryRec structure. + * + */ + typedef struct FT_MemoryRec_* FT_Memory; + + + /************************************************************************** + * + * @functype: + * FT_Alloc_Func + * + * @description: + * A function used to allocate `size` bytes from `memory`. + * + * @input: + * memory :: + * A handle to the source memory manager. + * + * size :: + * The size in bytes to allocate. + * + * @return: + * Address of new memory block. 0~in case of failure. + * + */ + typedef void* + (*FT_Alloc_Func)( FT_Memory memory, + long size ); + + + /************************************************************************** + * + * @functype: + * FT_Free_Func + * + * @description: + * A function used to release a given block of memory. + * + * @input: + * memory :: + * A handle to the source memory manager. + * + * block :: + * The address of the target memory block. + * + */ + typedef void + (*FT_Free_Func)( FT_Memory memory, + void* block ); + + + /************************************************************************** + * + * @functype: + * FT_Realloc_Func + * + * @description: + * A function used to re-allocate a given block of memory. + * + * @input: + * memory :: + * A handle to the source memory manager. + * + * cur_size :: + * The block's current size in bytes. + * + * new_size :: + * The block's requested new size. + * + * block :: + * The block's current address. + * + * @return: + * New block address. 0~in case of memory shortage. + * + * @note: + * In case of error, the old block must still be available. + * + */ + typedef void* + (*FT_Realloc_Func)( FT_Memory memory, + long cur_size, + long new_size, + void* block ); + + + /************************************************************************** + * + * @struct: + * FT_MemoryRec + * + * @description: + * A structure used to describe a given memory manager to FreeType~2. + * + * @fields: + * user :: + * A generic typeless pointer for user data. + * + * alloc :: + * A pointer type to an allocation function. + * + * free :: + * A pointer type to an memory freeing function. + * + * realloc :: + * A pointer type to a reallocation function. + * + */ + struct FT_MemoryRec_ + { + void* user; + FT_Alloc_Func alloc; + FT_Free_Func free; + FT_Realloc_Func realloc; + }; + + + /************************************************************************** + * + * I / O M A N A G E M E N T + * + */ + + + /************************************************************************** + * + * @type: + * FT_Stream + * + * @description: + * A handle to an input stream. + * + * @also: + * See @FT_StreamRec for the publicly accessible fields of a given stream + * object. + * + */ + typedef struct FT_StreamRec_* FT_Stream; + + + /************************************************************************** + * + * @struct: + * FT_StreamDesc + * + * @description: + * A union type used to store either a long or a pointer. This is used + * to store a file descriptor or a `FILE*` in an input stream. + * + */ + typedef union FT_StreamDesc_ + { + long value; + void* pointer; + + } FT_StreamDesc; + + + /************************************************************************** + * + * @functype: + * FT_Stream_IoFunc + * + * @description: + * A function used to seek and read data from a given input stream. + * + * @input: + * stream :: + * A handle to the source stream. + * + * offset :: + * The offset from the start of the stream to seek to. + * + * buffer :: + * The address of the read buffer. + * + * count :: + * The number of bytes to read from the stream. + * + * @return: + * If count >~0, return the number of bytes effectively read by the + * stream (after seeking to `offset`). If count ==~0, return the status + * of the seek operation (non-zero indicates an error). + * + */ + typedef unsigned long + (*FT_Stream_IoFunc)( FT_Stream stream, + unsigned long offset, + unsigned char* buffer, + unsigned long count ); + + + /************************************************************************** + * + * @functype: + * FT_Stream_CloseFunc + * + * @description: + * A function used to close a given input stream. + * + * @input: + * stream :: + * A handle to the target stream. + * + */ + typedef void + (*FT_Stream_CloseFunc)( FT_Stream stream ); + + + /************************************************************************** + * + * @struct: + * FT_StreamRec + * + * @description: + * A structure used to describe an input stream. + * + * @input: + * base :: + * For memory-based streams, this is the address of the first stream + * byte in memory. This field should always be set to `NULL` for + * disk-based streams. + * + * size :: + * The stream size in bytes. + * + * In case of compressed streams where the size is unknown before + * actually doing the decompression, the value is set to 0x7FFFFFFF. + * (Note that this size value can occur for normal streams also; it is + * thus just a hint.) + * + * pos :: + * The current position within the stream. + * + * descriptor :: + * This field is a union that can hold an integer or a pointer. It is + * used by stream implementations to store file descriptors or `FILE*` + * pointers. + * + * pathname :: + * This field is completely ignored by FreeType. However, it is often + * useful during debugging to use it to store the stream's filename + * (where available). + * + * read :: + * The stream's input function. + * + * close :: + * The stream's close function. + * + * memory :: + * The memory manager to use to preload frames. This is set internally + * by FreeType and shouldn't be touched by stream implementations. + * + * cursor :: + * This field is set and used internally by FreeType when parsing + * frames. In particular, the `FT_GET_XXX` macros use this instead of + * the `pos` field. + * + * limit :: + * This field is set and used internally by FreeType when parsing + * frames. + * + */ + typedef struct FT_StreamRec_ + { + unsigned char* base; + unsigned long size; + unsigned long pos; + + FT_StreamDesc descriptor; + FT_StreamDesc pathname; + FT_Stream_IoFunc read; + FT_Stream_CloseFunc close; + + FT_Memory memory; + unsigned char* cursor; + unsigned char* limit; + + } FT_StreamRec; + + /* */ + + +FT_END_HEADER + +#endif /* FTSYSTEM_H_ */ + + +/* END */ diff --git a/dependencies/linux64/include/freetype2/freetype/fttrigon.h b/dependencies/linux64/include/freetype2/freetype/fttrigon.h new file mode 100644 index 0000000..a5299e9 --- /dev/null +++ b/dependencies/linux64/include/freetype2/freetype/fttrigon.h @@ -0,0 +1,350 @@ +/**************************************************************************** + * + * fttrigon.h + * + * FreeType trigonometric functions (specification). + * + * Copyright (C) 2001-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + +#ifndef FTTRIGON_H_ +#define FTTRIGON_H_ + +#include + +#ifdef FREETYPE_H +#error "freetype.h of FreeType 1 has been loaded!" +#error "Please fix the directory search order for header files" +#error "so that freetype.h of FreeType 2 is found first." +#endif + + +FT_BEGIN_HEADER + + + /************************************************************************** + * + * @section: + * computations + * + */ + + + /************************************************************************** + * + * @type: + * FT_Angle + * + * @description: + * This type is used to model angle values in FreeType. Note that the + * angle is a 16.16 fixed-point value expressed in degrees. + * + */ + typedef FT_Fixed FT_Angle; + + + /************************************************************************** + * + * @macro: + * FT_ANGLE_PI + * + * @description: + * The angle pi expressed in @FT_Angle units. + * + */ +#define FT_ANGLE_PI ( 180L << 16 ) + + + /************************************************************************** + * + * @macro: + * FT_ANGLE_2PI + * + * @description: + * The angle 2*pi expressed in @FT_Angle units. + * + */ +#define FT_ANGLE_2PI ( FT_ANGLE_PI * 2 ) + + + /************************************************************************** + * + * @macro: + * FT_ANGLE_PI2 + * + * @description: + * The angle pi/2 expressed in @FT_Angle units. + * + */ +#define FT_ANGLE_PI2 ( FT_ANGLE_PI / 2 ) + + + /************************************************************************** + * + * @macro: + * FT_ANGLE_PI4 + * + * @description: + * The angle pi/4 expressed in @FT_Angle units. + * + */ +#define FT_ANGLE_PI4 ( FT_ANGLE_PI / 4 ) + + + /************************************************************************** + * + * @function: + * FT_Sin + * + * @description: + * Return the sinus of a given angle in fixed-point format. + * + * @input: + * angle :: + * The input angle. + * + * @return: + * The sinus value. + * + * @note: + * If you need both the sinus and cosinus for a given angle, use the + * function @FT_Vector_Unit. + * + */ + FT_EXPORT( FT_Fixed ) + FT_Sin( FT_Angle angle ); + + + /************************************************************************** + * + * @function: + * FT_Cos + * + * @description: + * Return the cosinus of a given angle in fixed-point format. + * + * @input: + * angle :: + * The input angle. + * + * @return: + * The cosinus value. + * + * @note: + * If you need both the sinus and cosinus for a given angle, use the + * function @FT_Vector_Unit. + * + */ + FT_EXPORT( FT_Fixed ) + FT_Cos( FT_Angle angle ); + + + /************************************************************************** + * + * @function: + * FT_Tan + * + * @description: + * Return the tangent of a given angle in fixed-point format. + * + * @input: + * angle :: + * The input angle. + * + * @return: + * The tangent value. + * + */ + FT_EXPORT( FT_Fixed ) + FT_Tan( FT_Angle angle ); + + + /************************************************************************** + * + * @function: + * FT_Atan2 + * + * @description: + * Return the arc-tangent corresponding to a given vector (x,y) in the 2d + * plane. + * + * @input: + * x :: + * The horizontal vector coordinate. + * + * y :: + * The vertical vector coordinate. + * + * @return: + * The arc-tangent value (i.e. angle). + * + */ + FT_EXPORT( FT_Angle ) + FT_Atan2( FT_Fixed x, + FT_Fixed y ); + + + /************************************************************************** + * + * @function: + * FT_Angle_Diff + * + * @description: + * Return the difference between two angles. The result is always + * constrained to the ]-PI..PI] interval. + * + * @input: + * angle1 :: + * First angle. + * + * angle2 :: + * Second angle. + * + * @return: + * Constrained value of `angle2-angle1`. + * + */ + FT_EXPORT( FT_Angle ) + FT_Angle_Diff( FT_Angle angle1, + FT_Angle angle2 ); + + + /************************************************************************** + * + * @function: + * FT_Vector_Unit + * + * @description: + * Return the unit vector corresponding to a given angle. After the + * call, the value of `vec.x` will be `cos(angle)`, and the value of + * `vec.y` will be `sin(angle)`. + * + * This function is useful to retrieve both the sinus and cosinus of a + * given angle quickly. + * + * @output: + * vec :: + * The address of target vector. + * + * @input: + * angle :: + * The input angle. + * + */ + FT_EXPORT( void ) + FT_Vector_Unit( FT_Vector* vec, + FT_Angle angle ); + + + /************************************************************************** + * + * @function: + * FT_Vector_Rotate + * + * @description: + * Rotate a vector by a given angle. + * + * @inout: + * vec :: + * The address of target vector. + * + * @input: + * angle :: + * The input angle. + * + */ + FT_EXPORT( void ) + FT_Vector_Rotate( FT_Vector* vec, + FT_Angle angle ); + + + /************************************************************************** + * + * @function: + * FT_Vector_Length + * + * @description: + * Return the length of a given vector. + * + * @input: + * vec :: + * The address of target vector. + * + * @return: + * The vector length, expressed in the same units that the original + * vector coordinates. + * + */ + FT_EXPORT( FT_Fixed ) + FT_Vector_Length( FT_Vector* vec ); + + + /************************************************************************** + * + * @function: + * FT_Vector_Polarize + * + * @description: + * Compute both the length and angle of a given vector. + * + * @input: + * vec :: + * The address of source vector. + * + * @output: + * length :: + * The vector length. + * + * angle :: + * The vector angle. + * + */ + FT_EXPORT( void ) + FT_Vector_Polarize( FT_Vector* vec, + FT_Fixed *length, + FT_Angle *angle ); + + + /************************************************************************** + * + * @function: + * FT_Vector_From_Polar + * + * @description: + * Compute vector coordinates from a length and angle. + * + * @output: + * vec :: + * The address of source vector. + * + * @input: + * length :: + * The vector length. + * + * angle :: + * The vector angle. + * + */ + FT_EXPORT( void ) + FT_Vector_From_Polar( FT_Vector* vec, + FT_Fixed length, + FT_Angle angle ); + + /* */ + + +FT_END_HEADER + +#endif /* FTTRIGON_H_ */ + + +/* END */ diff --git a/dependencies/linux64/include/freetype2/freetype/fttypes.h b/dependencies/linux64/include/freetype2/freetype/fttypes.h new file mode 100644 index 0000000..2781514 --- /dev/null +++ b/dependencies/linux64/include/freetype2/freetype/fttypes.h @@ -0,0 +1,617 @@ +/**************************************************************************** + * + * fttypes.h + * + * FreeType simple types definitions (specification only). + * + * Copyright (C) 1996-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + +#ifndef FTTYPES_H_ +#define FTTYPES_H_ + + +#include +#include FT_CONFIG_CONFIG_H +#include +#include + +#include + + +FT_BEGIN_HEADER + + + /************************************************************************** + * + * @section: + * basic_types + * + * @title: + * Basic Data Types + * + * @abstract: + * The basic data types defined by the library. + * + * @description: + * This section contains the basic data types defined by FreeType~2, + * ranging from simple scalar types to bitmap descriptors. More + * font-specific structures are defined in a different section. Note + * that FreeType does not use floating-point data types. Fractional + * values are represented by fixed-point integers, with lower bits + * storing the fractional part. + * + * @order: + * FT_Byte + * FT_Bytes + * FT_Char + * FT_Int + * FT_UInt + * FT_Int16 + * FT_UInt16 + * FT_Int32 + * FT_UInt32 + * FT_Int64 + * FT_UInt64 + * FT_Short + * FT_UShort + * FT_Long + * FT_ULong + * FT_Bool + * FT_Offset + * FT_PtrDist + * FT_String + * FT_Tag + * FT_Error + * FT_Fixed + * FT_Pointer + * FT_Pos + * FT_Vector + * FT_BBox + * FT_Matrix + * FT_FWord + * FT_UFWord + * FT_F2Dot14 + * FT_UnitVector + * FT_F26Dot6 + * FT_Data + * + * FT_MAKE_TAG + * + * FT_Generic + * FT_Generic_Finalizer + * + * FT_Bitmap + * FT_Pixel_Mode + * FT_Palette_Mode + * FT_Glyph_Format + * FT_IMAGE_TAG + * + */ + + + /************************************************************************** + * + * @type: + * FT_Bool + * + * @description: + * A typedef of unsigned char, used for simple booleans. As usual, + * values 1 and~0 represent true and false, respectively. + */ + typedef unsigned char FT_Bool; + + + /************************************************************************** + * + * @type: + * FT_FWord + * + * @description: + * A signed 16-bit integer used to store a distance in original font + * units. + */ + typedef signed short FT_FWord; /* distance in FUnits */ + + + /************************************************************************** + * + * @type: + * FT_UFWord + * + * @description: + * An unsigned 16-bit integer used to store a distance in original font + * units. + */ + typedef unsigned short FT_UFWord; /* unsigned distance */ + + + /************************************************************************** + * + * @type: + * FT_Char + * + * @description: + * A simple typedef for the _signed_ char type. + */ + typedef signed char FT_Char; + + + /************************************************************************** + * + * @type: + * FT_Byte + * + * @description: + * A simple typedef for the _unsigned_ char type. + */ + typedef unsigned char FT_Byte; + + + /************************************************************************** + * + * @type: + * FT_Bytes + * + * @description: + * A typedef for constant memory areas. + */ + typedef const FT_Byte* FT_Bytes; + + + /************************************************************************** + * + * @type: + * FT_Tag + * + * @description: + * A typedef for 32-bit tags (as used in the SFNT format). + */ + typedef FT_UInt32 FT_Tag; + + + /************************************************************************** + * + * @type: + * FT_String + * + * @description: + * A simple typedef for the char type, usually used for strings. + */ + typedef char FT_String; + + + /************************************************************************** + * + * @type: + * FT_Short + * + * @description: + * A typedef for signed short. + */ + typedef signed short FT_Short; + + + /************************************************************************** + * + * @type: + * FT_UShort + * + * @description: + * A typedef for unsigned short. + */ + typedef unsigned short FT_UShort; + + + /************************************************************************** + * + * @type: + * FT_Int + * + * @description: + * A typedef for the int type. + */ + typedef signed int FT_Int; + + + /************************************************************************** + * + * @type: + * FT_UInt + * + * @description: + * A typedef for the unsigned int type. + */ + typedef unsigned int FT_UInt; + + + /************************************************************************** + * + * @type: + * FT_Long + * + * @description: + * A typedef for signed long. + */ + typedef signed long FT_Long; + + + /************************************************************************** + * + * @type: + * FT_ULong + * + * @description: + * A typedef for unsigned long. + */ + typedef unsigned long FT_ULong; + + + /************************************************************************** + * + * @type: + * FT_F2Dot14 + * + * @description: + * A signed 2.14 fixed-point type used for unit vectors. + */ + typedef signed short FT_F2Dot14; + + + /************************************************************************** + * + * @type: + * FT_F26Dot6 + * + * @description: + * A signed 26.6 fixed-point type used for vectorial pixel coordinates. + */ + typedef signed long FT_F26Dot6; + + + /************************************************************************** + * + * @type: + * FT_Fixed + * + * @description: + * This type is used to store 16.16 fixed-point values, like scaling + * values or matrix coefficients. + */ + typedef signed long FT_Fixed; + + + /************************************************************************** + * + * @type: + * FT_Error + * + * @description: + * The FreeType error code type. A value of~0 is always interpreted as a + * successful operation. + */ + typedef int FT_Error; + + + /************************************************************************** + * + * @type: + * FT_Pointer + * + * @description: + * A simple typedef for a typeless pointer. + */ + typedef void* FT_Pointer; + + + /************************************************************************** + * + * @type: + * FT_Offset + * + * @description: + * This is equivalent to the ANSI~C `size_t` type, i.e., the largest + * _unsigned_ integer type used to express a file size or position, or a + * memory block size. + */ + typedef size_t FT_Offset; + + + /************************************************************************** + * + * @type: + * FT_PtrDist + * + * @description: + * This is equivalent to the ANSI~C `ptrdiff_t` type, i.e., the largest + * _signed_ integer type used to express the distance between two + * pointers. + */ + typedef ft_ptrdiff_t FT_PtrDist; + + + /************************************************************************** + * + * @struct: + * FT_UnitVector + * + * @description: + * A simple structure used to store a 2D vector unit vector. Uses + * FT_F2Dot14 types. + * + * @fields: + * x :: + * Horizontal coordinate. + * + * y :: + * Vertical coordinate. + */ + typedef struct FT_UnitVector_ + { + FT_F2Dot14 x; + FT_F2Dot14 y; + + } FT_UnitVector; + + + /************************************************************************** + * + * @struct: + * FT_Matrix + * + * @description: + * A simple structure used to store a 2x2 matrix. Coefficients are in + * 16.16 fixed-point format. The computation performed is: + * + * ``` + * x' = x*xx + y*xy + * y' = x*yx + y*yy + * ``` + * + * @fields: + * xx :: + * Matrix coefficient. + * + * xy :: + * Matrix coefficient. + * + * yx :: + * Matrix coefficient. + * + * yy :: + * Matrix coefficient. + */ + typedef struct FT_Matrix_ + { + FT_Fixed xx, xy; + FT_Fixed yx, yy; + + } FT_Matrix; + + + /************************************************************************** + * + * @struct: + * FT_Data + * + * @description: + * Read-only binary data represented as a pointer and a length. + * + * @fields: + * pointer :: + * The data. + * + * length :: + * The length of the data in bytes. + */ + typedef struct FT_Data_ + { + const FT_Byte* pointer; + FT_UInt length; + + } FT_Data; + + + /************************************************************************** + * + * @functype: + * FT_Generic_Finalizer + * + * @description: + * Describe a function used to destroy the 'client' data of any FreeType + * object. See the description of the @FT_Generic type for details of + * usage. + * + * @input: + * The address of the FreeType object that is under finalization. Its + * client data is accessed through its `generic` field. + */ + typedef void (*FT_Generic_Finalizer)( void* object ); + + + /************************************************************************** + * + * @struct: + * FT_Generic + * + * @description: + * Client applications often need to associate their own data to a + * variety of FreeType core objects. For example, a text layout API + * might want to associate a glyph cache to a given size object. + * + * Some FreeType object contains a `generic` field, of type `FT_Generic`, + * which usage is left to client applications and font servers. + * + * It can be used to store a pointer to client-specific data, as well as + * the address of a 'finalizer' function, which will be called by + * FreeType when the object is destroyed (for example, the previous + * client example would put the address of the glyph cache destructor in + * the `finalizer` field). + * + * @fields: + * data :: + * A typeless pointer to any client-specified data. This field is + * completely ignored by the FreeType library. + * + * finalizer :: + * A pointer to a 'generic finalizer' function, which will be called + * when the object is destroyed. If this field is set to `NULL`, no + * code will be called. + */ + typedef struct FT_Generic_ + { + void* data; + FT_Generic_Finalizer finalizer; + + } FT_Generic; + + + /************************************************************************** + * + * @macro: + * FT_MAKE_TAG + * + * @description: + * This macro converts four-letter tags that are used to label TrueType + * tables into an `FT_Tag` type, to be used within FreeType. + * + * @note: + * The produced values **must** be 32-bit integers. Don't redefine this + * macro. + */ +#define FT_MAKE_TAG( _x1, _x2, _x3, _x4 ) \ + ( ( FT_STATIC_BYTE_CAST( FT_Tag, _x1 ) << 24 ) | \ + ( FT_STATIC_BYTE_CAST( FT_Tag, _x2 ) << 16 ) | \ + ( FT_STATIC_BYTE_CAST( FT_Tag, _x3 ) << 8 ) | \ + FT_STATIC_BYTE_CAST( FT_Tag, _x4 ) ) + + + /*************************************************************************/ + /*************************************************************************/ + /* */ + /* L I S T M A N A G E M E N T */ + /* */ + /*************************************************************************/ + /*************************************************************************/ + + + /************************************************************************** + * + * @section: + * list_processing + * + */ + + + /************************************************************************** + * + * @type: + * FT_ListNode + * + * @description: + * Many elements and objects in FreeType are listed through an @FT_List + * record (see @FT_ListRec). As its name suggests, an FT_ListNode is a + * handle to a single list element. + */ + typedef struct FT_ListNodeRec_* FT_ListNode; + + + /************************************************************************** + * + * @type: + * FT_List + * + * @description: + * A handle to a list record (see @FT_ListRec). + */ + typedef struct FT_ListRec_* FT_List; + + + /************************************************************************** + * + * @struct: + * FT_ListNodeRec + * + * @description: + * A structure used to hold a single list element. + * + * @fields: + * prev :: + * The previous element in the list. `NULL` if first. + * + * next :: + * The next element in the list. `NULL` if last. + * + * data :: + * A typeless pointer to the listed object. + */ + typedef struct FT_ListNodeRec_ + { + FT_ListNode prev; + FT_ListNode next; + void* data; + + } FT_ListNodeRec; + + + /************************************************************************** + * + * @struct: + * FT_ListRec + * + * @description: + * A structure used to hold a simple doubly-linked list. These are used + * in many parts of FreeType. + * + * @fields: + * head :: + * The head (first element) of doubly-linked list. + * + * tail :: + * The tail (last element) of doubly-linked list. + */ + typedef struct FT_ListRec_ + { + FT_ListNode head; + FT_ListNode tail; + + } FT_ListRec; + + /* */ + + +#define FT_IS_EMPTY( list ) ( (list).head == 0 ) +#define FT_BOOL( x ) FT_STATIC_CAST( FT_Bool, (x) != 0 ) + + /* concatenate C tokens */ +#define FT_ERR_XCAT( x, y ) x ## y +#define FT_ERR_CAT( x, y ) FT_ERR_XCAT( x, y ) + + /* see `ftmoderr.h` for descriptions of the following macros */ + +#define FT_ERR( e ) FT_ERR_CAT( FT_ERR_PREFIX, e ) + +#define FT_ERROR_BASE( x ) ( (x) & 0xFF ) +#define FT_ERROR_MODULE( x ) ( (x) & 0xFF00U ) + +#define FT_ERR_EQ( x, e ) \ + ( FT_ERROR_BASE( x ) == FT_ERROR_BASE( FT_ERR( e ) ) ) +#define FT_ERR_NEQ( x, e ) \ + ( FT_ERROR_BASE( x ) != FT_ERROR_BASE( FT_ERR( e ) ) ) + + +FT_END_HEADER + +#endif /* FTTYPES_H_ */ + + +/* END */ diff --git a/dependencies/linux64/include/freetype2/freetype/ftwinfnt.h b/dependencies/linux64/include/freetype2/freetype/ftwinfnt.h new file mode 100644 index 0000000..ffc0645 --- /dev/null +++ b/dependencies/linux64/include/freetype2/freetype/ftwinfnt.h @@ -0,0 +1,275 @@ +/**************************************************************************** + * + * ftwinfnt.h + * + * FreeType API for accessing Windows fnt-specific data. + * + * Copyright (C) 2003-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + +#ifndef FTWINFNT_H_ +#define FTWINFNT_H_ + +#include + +#ifdef FREETYPE_H +#error "freetype.h of FreeType 1 has been loaded!" +#error "Please fix the directory search order for header files" +#error "so that freetype.h of FreeType 2 is found first." +#endif + + +FT_BEGIN_HEADER + + + /************************************************************************** + * + * @section: + * winfnt_fonts + * + * @title: + * Window FNT Files + * + * @abstract: + * Windows FNT-specific API. + * + * @description: + * This section contains the declaration of Windows FNT-specific + * functions. + * + */ + + + /************************************************************************** + * + * @enum: + * FT_WinFNT_ID_XXX + * + * @description: + * A list of valid values for the `charset` byte in @FT_WinFNT_HeaderRec. + * Exact mapping tables for the various 'cpXXXX' encodings (except for + * 'cp1361') can be found at 'ftp://ftp.unicode.org/Public/' in the + * `MAPPINGS/VENDORS/MICSFT/WINDOWS` subdirectory. 'cp1361' is roughly a + * superset of `MAPPINGS/OBSOLETE/EASTASIA/KSC/JOHAB.TXT`. + * + * @values: + * FT_WinFNT_ID_DEFAULT :: + * This is used for font enumeration and font creation as a 'don't + * care' value. Valid font files don't contain this value. When + * querying for information about the character set of the font that is + * currently selected into a specified device context, this return + * value (of the related Windows API) simply denotes failure. + * + * FT_WinFNT_ID_SYMBOL :: + * There is no known mapping table available. + * + * FT_WinFNT_ID_MAC :: + * Mac Roman encoding. + * + * FT_WinFNT_ID_OEM :: + * From Michael Poettgen : + * + * The 'Windows Font Mapping' article says that `FT_WinFNT_ID_OEM` is + * used for the charset of vector fonts, like `modern.fon`, + * `roman.fon`, and `script.fon` on Windows. + * + * The 'CreateFont' documentation says: The `FT_WinFNT_ID_OEM` value + * specifies a character set that is operating-system dependent. + * + * The 'IFIMETRICS' documentation from the 'Windows Driver Development + * Kit' says: This font supports an OEM-specific character set. The + * OEM character set is system dependent. + * + * In general OEM, as opposed to ANSI (i.e., 'cp1252'), denotes the + * second default codepage that most international versions of Windows + * have. It is one of the OEM codepages from + * + * https://learn.microsoft.com/windows/win32/intl/code-page-identifiers , + * + * and is used for the 'DOS boxes', to support legacy applications. A + * German Windows version for example usually uses ANSI codepage 1252 + * and OEM codepage 850. + * + * FT_WinFNT_ID_CP874 :: + * A superset of Thai TIS 620 and ISO 8859-11. + * + * FT_WinFNT_ID_CP932 :: + * A superset of Japanese Shift-JIS (with minor deviations). + * + * FT_WinFNT_ID_CP936 :: + * A superset of simplified Chinese GB 2312-1980 (with different + * ordering and minor deviations). + * + * FT_WinFNT_ID_CP949 :: + * A superset of Korean Hangul KS~C 5601-1987 (with different ordering + * and minor deviations). + * + * FT_WinFNT_ID_CP950 :: + * A superset of traditional Chinese Big~5 ETen (with different + * ordering and minor deviations). + * + * FT_WinFNT_ID_CP1250 :: + * A superset of East European ISO 8859-2 (with slightly different + * ordering). + * + * FT_WinFNT_ID_CP1251 :: + * A superset of Russian ISO 8859-5 (with different ordering). + * + * FT_WinFNT_ID_CP1252 :: + * ANSI encoding. A superset of ISO 8859-1. + * + * FT_WinFNT_ID_CP1253 :: + * A superset of Greek ISO 8859-7 (with minor modifications). + * + * FT_WinFNT_ID_CP1254 :: + * A superset of Turkish ISO 8859-9. + * + * FT_WinFNT_ID_CP1255 :: + * A superset of Hebrew ISO 8859-8 (with some modifications). + * + * FT_WinFNT_ID_CP1256 :: + * A superset of Arabic ISO 8859-6 (with different ordering). + * + * FT_WinFNT_ID_CP1257 :: + * A superset of Baltic ISO 8859-13 (with some deviations). + * + * FT_WinFNT_ID_CP1258 :: + * For Vietnamese. This encoding doesn't cover all necessary + * characters. + * + * FT_WinFNT_ID_CP1361 :: + * Korean (Johab). + */ + +#define FT_WinFNT_ID_CP1252 0 +#define FT_WinFNT_ID_DEFAULT 1 +#define FT_WinFNT_ID_SYMBOL 2 +#define FT_WinFNT_ID_MAC 77 +#define FT_WinFNT_ID_CP932 128 +#define FT_WinFNT_ID_CP949 129 +#define FT_WinFNT_ID_CP1361 130 +#define FT_WinFNT_ID_CP936 134 +#define FT_WinFNT_ID_CP950 136 +#define FT_WinFNT_ID_CP1253 161 +#define FT_WinFNT_ID_CP1254 162 +#define FT_WinFNT_ID_CP1258 163 +#define FT_WinFNT_ID_CP1255 177 +#define FT_WinFNT_ID_CP1256 178 +#define FT_WinFNT_ID_CP1257 186 +#define FT_WinFNT_ID_CP1251 204 +#define FT_WinFNT_ID_CP874 222 +#define FT_WinFNT_ID_CP1250 238 +#define FT_WinFNT_ID_OEM 255 + + + /************************************************************************** + * + * @struct: + * FT_WinFNT_HeaderRec + * + * @description: + * Windows FNT Header info. + */ + typedef struct FT_WinFNT_HeaderRec_ + { + FT_UShort version; + FT_ULong file_size; + FT_Byte copyright[60]; + FT_UShort file_type; + FT_UShort nominal_point_size; + FT_UShort vertical_resolution; + FT_UShort horizontal_resolution; + FT_UShort ascent; + FT_UShort internal_leading; + FT_UShort external_leading; + FT_Byte italic; + FT_Byte underline; + FT_Byte strike_out; + FT_UShort weight; + FT_Byte charset; + FT_UShort pixel_width; + FT_UShort pixel_height; + FT_Byte pitch_and_family; + FT_UShort avg_width; + FT_UShort max_width; + FT_Byte first_char; + FT_Byte last_char; + FT_Byte default_char; + FT_Byte break_char; + FT_UShort bytes_per_row; + FT_ULong device_offset; + FT_ULong face_name_offset; + FT_ULong bits_pointer; + FT_ULong bits_offset; + FT_Byte reserved; + FT_ULong flags; + FT_UShort A_space; + FT_UShort B_space; + FT_UShort C_space; + FT_UShort color_table_offset; + FT_ULong reserved1[4]; + + } FT_WinFNT_HeaderRec; + + + /************************************************************************** + * + * @struct: + * FT_WinFNT_Header + * + * @description: + * A handle to an @FT_WinFNT_HeaderRec structure. + */ + typedef struct FT_WinFNT_HeaderRec_* FT_WinFNT_Header; + + + /************************************************************************** + * + * @function: + * FT_Get_WinFNT_Header + * + * @description: + * Retrieve a Windows FNT font info header. + * + * @input: + * face :: + * A handle to the input face. + * + * @output: + * aheader :: + * The WinFNT header. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * This function only works with Windows FNT faces, returning an error + * otherwise. + */ + FT_EXPORT( FT_Error ) + FT_Get_WinFNT_Header( FT_Face face, + FT_WinFNT_HeaderRec *aheader ); + + /* */ + + +FT_END_HEADER + +#endif /* FTWINFNT_H_ */ + + +/* END */ + + +/* Local Variables: */ +/* coding: utf-8 */ +/* End: */ diff --git a/dependencies/linux64/include/freetype2/freetype/otsvg.h b/dependencies/linux64/include/freetype2/freetype/otsvg.h new file mode 100644 index 0000000..9d35693 --- /dev/null +++ b/dependencies/linux64/include/freetype2/freetype/otsvg.h @@ -0,0 +1,336 @@ +/**************************************************************************** + * + * otsvg.h + * + * Interface for OT-SVG support related things (specification). + * + * Copyright (C) 2022-2024 by + * David Turner, Robert Wilhelm, Werner Lemberg, and Moazin Khatti. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + +#ifndef OTSVG_H_ +#define OTSVG_H_ + +#include + +#ifdef FREETYPE_H +#error "freetype.h of FreeType 1 has been loaded!" +#error "Please fix the directory search order for header files" +#error "so that freetype.h of FreeType 2 is found first." +#endif + + +FT_BEGIN_HEADER + + + /************************************************************************** + * + * @section: + * svg_fonts + * + * @title: + * OpenType SVG Fonts + * + * @abstract: + * OT-SVG API between FreeType and an external SVG rendering library. + * + * @description: + * This section describes the four hooks necessary to render SVG + * 'documents' that are contained in an OpenType font's 'SVG~' table. + * + * For more information on the implementation, see our standard hooks + * based on 'librsvg' in the [FreeType Demo + * Programs](https://gitlab.freedesktop.org/freetype/freetype-demos) + * repository. + * + */ + + + /************************************************************************** + * + * @functype: + * SVG_Lib_Init_Func + * + * @description: + * A callback that is called when the first OT-SVG glyph is rendered in + * the lifetime of an @FT_Library object. In a typical implementation, + * one would want to allocate a structure and point the `data_pointer` + * to it and perform any library initializations that might be needed. + * + * @inout: + * data_pointer :: + * The SVG rendering module stores a pointer variable that can be used + * by clients to store any data that needs to be shared across + * different hooks. `data_pointer` is essentially a pointer to that + * pointer such that it can be written to as well as read from. + * + * @return: + * FreeType error code. 0 means success. + * + * @since: + * 2.12 + */ + typedef FT_Error + (*SVG_Lib_Init_Func)( FT_Pointer *data_pointer ); + + + /************************************************************************** + * + * @functype: + * SVG_Lib_Free_Func + * + * @description: + * A callback that is called when the `ot-svg` module is being freed. + * It is only called if the init hook was called earlier. This means + * that neither the init nor the free hook is called if no OT-SVG glyph + * is rendered. + * + * In a typical implementation, one would want to free any state + * structure that was allocated in the init hook and perform any + * library-related closure that might be needed. + * + * @inout: + * data_pointer :: + * The SVG rendering module stores a pointer variable that can be used + * by clients to store any data that needs to be shared across + * different hooks. `data_pointer` is essentially a pointer to that + * pointer such that it can be written to as well as read from. + * + * @since: + * 2.12 + */ + typedef void + (*SVG_Lib_Free_Func)( FT_Pointer *data_pointer ); + + + /************************************************************************** + * + * @functype: + * SVG_Lib_Render_Func + * + * @description: + * A callback that is called to render an OT-SVG glyph. This callback + * hook is called right after the preset hook @SVG_Lib_Preset_Slot_Func + * has been called with `cache` set to `TRUE`. The data necessary to + * render is available through the handle @FT_SVG_Document, which is set + * in the `other` field of @FT_GlyphSlotRec. + * + * The render hook is expected to render the SVG glyph to the bitmap + * buffer that is allocated already at `slot->bitmap.buffer`. It also + * sets the `num_grays` value as well as `slot->format`. + * + * @input: + * slot :: + * The slot to render. + * + * @inout: + * data_pointer :: + * The SVG rendering module stores a pointer variable that can be used + * by clients to store any data that needs to be shared across + * different hooks. `data_pointer` is essentially a pointer to that + * pointer such that it can be written to as well as read from. + * + * @return: + * FreeType error code. 0 means success. + * + * @since: + * 2.12 + */ + typedef FT_Error + (*SVG_Lib_Render_Func)( FT_GlyphSlot slot, + FT_Pointer *data_pointer ); + + + /************************************************************************** + * + * @functype: + * SVG_Lib_Preset_Slot_Func + * + * @description: + * A callback that is called to preset the glyph slot. It is called from + * two places. + * + * 1. When `FT_Load_Glyph` needs to preset the glyph slot. + * + * 2. Right before the `svg` module calls the render callback hook. + * + * When it is the former, the argument `cache` is set to `FALSE`. When + * it is the latter, the argument `cache` is set to `TRUE`. This + * distinction has been made because many calculations that are necessary + * for presetting a glyph slot are the same needed later for the render + * callback hook. Thus, if `cache` is `TRUE`, the hook can _cache_ those + * calculations in a memory block referenced by the state pointer. + * + * This hook is expected to preset the slot by setting parameters such as + * `bitmap_left`, `bitmap_top`, `width`, `rows`, `pitch`, and + * `pixel_mode`. It is also expected to set all the metrics for the slot + * including the vertical advance if it is not already set. Typically, + * fonts have horizontal advances but not vertical ones. If those are + * available, they had already been set, otherwise they have to be + * estimated and set manually. The hook must take into account the + * transformations that have been set, and translate the transformation + * matrices into the SVG coordinate system, as the original matrix is + * intended for the TTF/CFF coordinate system. + * + * @input: + * slot :: + * The glyph slot that has the SVG document loaded. + * + * cache :: + * See description. + * + * @inout: + * data_pointer :: + * The SVG rendering module stores a pointer variable that can be used + * by clients to store any data that needs to be shared across + * different hooks. `data_pointer` is essentially a pointer to that + * pointer such that it can be written to as well as read from. + * + * @return: + * FreeType error code. 0 means success. + * + * @since: + * 2.12 + */ + typedef FT_Error + (*SVG_Lib_Preset_Slot_Func)( FT_GlyphSlot slot, + FT_Bool cache, + FT_Pointer *state ); + + + /************************************************************************** + * + * @struct: + * SVG_RendererHooks + * + * @description: + * A structure that stores the four hooks needed to render OT-SVG glyphs + * properly. The structure is publicly used to set the hooks via the + * @svg-hooks driver property. + * + * The behavior of each hook is described in its documentation. One + * thing to note is that the preset hook and the render hook often need + * to do the same operations; therefore, it's better to cache the + * intermediate data in a state structure to avoid calculating it twice. + * For example, in the preset hook one can draw the glyph on a recorder + * surface and later create a bitmap surface from it in the render hook. + * + * All four hooks must be non-NULL. + * + * @fields: + * init_svg :: + * The initialization hook. + * + * free_svg :: + * The cleanup hook. + * + * render_hook :: + * The render hook. + * + * preset_slot :: + * The preset hook. + * + * @since: + * 2.12 + */ + typedef struct SVG_RendererHooks_ + { + SVG_Lib_Init_Func init_svg; + SVG_Lib_Free_Func free_svg; + SVG_Lib_Render_Func render_svg; + + SVG_Lib_Preset_Slot_Func preset_slot; + + } SVG_RendererHooks; + + + /************************************************************************** + * + * @struct: + * FT_SVG_DocumentRec + * + * @description: + * A structure that models one SVG document. + * + * @fields: + * svg_document :: + * A pointer to the SVG document. + * + * svg_document_length :: + * The length of `svg_document`. + * + * metrics :: + * A metrics object storing the size information. + * + * units_per_EM :: + * The size of the EM square. + * + * start_glyph_id :: + * The first glyph ID in the glyph range covered by this document. + * + * end_glyph_id :: + * The last glyph ID in the glyph range covered by this document. + * + * transform :: + * A 2x2 transformation matrix to apply to the glyph while rendering + * it. + * + * delta :: + * The translation to apply to the glyph while rendering. + * + * @note: + * When an @FT_GlyphSlot object `slot` is passed down to a renderer, the + * renderer can only access the `metrics` and `units_per_EM` fields via + * `slot->face`. However, when @FT_Glyph_To_Bitmap sets up a dummy + * object, it has no way to set a `face` object. Thus, metrics + * information and `units_per_EM` (which is necessary for OT-SVG) has to + * be stored separately. + * + * @since: + * 2.12 + */ + typedef struct FT_SVG_DocumentRec_ + { + FT_Byte* svg_document; + FT_ULong svg_document_length; + + FT_Size_Metrics metrics; + FT_UShort units_per_EM; + + FT_UShort start_glyph_id; + FT_UShort end_glyph_id; + + FT_Matrix transform; + FT_Vector delta; + + } FT_SVG_DocumentRec; + + + /************************************************************************** + * + * @type: + * FT_SVG_Document + * + * @description: + * A handle to an @FT_SVG_DocumentRec object. + * + * @since: + * 2.12 + */ + typedef struct FT_SVG_DocumentRec_* FT_SVG_Document; + + +FT_END_HEADER + +#endif /* OTSVG_H_ */ + + +/* END */ diff --git a/dependencies/linux64/include/freetype2/freetype/t1tables.h b/dependencies/linux64/include/freetype2/freetype/t1tables.h new file mode 100644 index 0000000..fbd558a --- /dev/null +++ b/dependencies/linux64/include/freetype2/freetype/t1tables.h @@ -0,0 +1,735 @@ +/**************************************************************************** + * + * t1tables.h + * + * Basic Type 1/Type 2 tables definitions and interface (specification + * only). + * + * Copyright (C) 1996-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + +#ifndef T1TABLES_H_ +#define T1TABLES_H_ + + +#include + +#ifdef FREETYPE_H +#error "freetype.h of FreeType 1 has been loaded!" +#error "Please fix the directory search order for header files" +#error "so that freetype.h of FreeType 2 is found first." +#endif + + +FT_BEGIN_HEADER + + + /************************************************************************** + * + * @section: + * type1_tables + * + * @title: + * Type 1 Tables + * + * @abstract: + * Type~1-specific font tables. + * + * @description: + * This section contains the definition of Type~1-specific tables, + * including structures related to other PostScript font formats. + * + * @order: + * PS_FontInfoRec + * PS_FontInfo + * PS_PrivateRec + * PS_Private + * + * CID_FaceDictRec + * CID_FaceDict + * CID_FaceInfoRec + * CID_FaceInfo + * + * FT_Has_PS_Glyph_Names + * FT_Get_PS_Font_Info + * FT_Get_PS_Font_Private + * FT_Get_PS_Font_Value + * + * T1_Blend_Flags + * T1_EncodingType + * PS_Dict_Keys + * + */ + + + /* Note that we separate font data in PS_FontInfoRec and PS_PrivateRec */ + /* structures in order to support Multiple Master fonts. */ + + + /************************************************************************** + * + * @struct: + * PS_FontInfoRec + * + * @description: + * A structure used to model a Type~1 or Type~2 FontInfo dictionary. + * Note that for Multiple Master fonts, each instance has its own + * FontInfo dictionary. + */ + typedef struct PS_FontInfoRec_ + { + FT_String* version; + FT_String* notice; + FT_String* full_name; + FT_String* family_name; + FT_String* weight; + FT_Long italic_angle; + FT_Bool is_fixed_pitch; + FT_Short underline_position; + FT_UShort underline_thickness; + + } PS_FontInfoRec; + + + /************************************************************************** + * + * @struct: + * PS_FontInfo + * + * @description: + * A handle to a @PS_FontInfoRec structure. + */ + typedef struct PS_FontInfoRec_* PS_FontInfo; + + + /************************************************************************** + * + * @struct: + * T1_FontInfo + * + * @description: + * This type is equivalent to @PS_FontInfoRec. It is deprecated but kept + * to maintain source compatibility between various versions of FreeType. + */ + typedef PS_FontInfoRec T1_FontInfo; + + + /************************************************************************** + * + * @struct: + * PS_PrivateRec + * + * @description: + * A structure used to model a Type~1 or Type~2 private dictionary. Note + * that for Multiple Master fonts, each instance has its own Private + * dictionary. + */ + typedef struct PS_PrivateRec_ + { + FT_Int unique_id; + FT_Int lenIV; + + FT_Byte num_blue_values; + FT_Byte num_other_blues; + FT_Byte num_family_blues; + FT_Byte num_family_other_blues; + + FT_Short blue_values[14]; + FT_Short other_blues[10]; + + FT_Short family_blues [14]; + FT_Short family_other_blues[10]; + + FT_Fixed blue_scale; + FT_Int blue_shift; + FT_Int blue_fuzz; + + FT_UShort standard_width[1]; + FT_UShort standard_height[1]; + + FT_Byte num_snap_widths; + FT_Byte num_snap_heights; + FT_Bool force_bold; + FT_Bool round_stem_up; + + FT_Short snap_widths [13]; /* including std width */ + FT_Short snap_heights[13]; /* including std height */ + + FT_Fixed expansion_factor; + + FT_Long language_group; + FT_Long password; + + FT_Short min_feature[2]; + + } PS_PrivateRec; + + + /************************************************************************** + * + * @struct: + * PS_Private + * + * @description: + * A handle to a @PS_PrivateRec structure. + */ + typedef struct PS_PrivateRec_* PS_Private; + + + /************************************************************************** + * + * @struct: + * T1_Private + * + * @description: + * This type is equivalent to @PS_PrivateRec. It is deprecated but kept + * to maintain source compatibility between various versions of FreeType. + */ + typedef PS_PrivateRec T1_Private; + + + /************************************************************************** + * + * @enum: + * T1_Blend_Flags + * + * @description: + * A set of flags used to indicate which fields are present in a given + * blend dictionary (font info or private). Used to support Multiple + * Masters fonts. + * + * @values: + * T1_BLEND_UNDERLINE_POSITION :: + * T1_BLEND_UNDERLINE_THICKNESS :: + * T1_BLEND_ITALIC_ANGLE :: + * T1_BLEND_BLUE_VALUES :: + * T1_BLEND_OTHER_BLUES :: + * T1_BLEND_STANDARD_WIDTH :: + * T1_BLEND_STANDARD_HEIGHT :: + * T1_BLEND_STEM_SNAP_WIDTHS :: + * T1_BLEND_STEM_SNAP_HEIGHTS :: + * T1_BLEND_BLUE_SCALE :: + * T1_BLEND_BLUE_SHIFT :: + * T1_BLEND_FAMILY_BLUES :: + * T1_BLEND_FAMILY_OTHER_BLUES :: + * T1_BLEND_FORCE_BOLD :: + */ + typedef enum T1_Blend_Flags_ + { + /* required fields in a FontInfo blend dictionary */ + T1_BLEND_UNDERLINE_POSITION = 0, + T1_BLEND_UNDERLINE_THICKNESS, + T1_BLEND_ITALIC_ANGLE, + + /* required fields in a Private blend dictionary */ + T1_BLEND_BLUE_VALUES, + T1_BLEND_OTHER_BLUES, + T1_BLEND_STANDARD_WIDTH, + T1_BLEND_STANDARD_HEIGHT, + T1_BLEND_STEM_SNAP_WIDTHS, + T1_BLEND_STEM_SNAP_HEIGHTS, + T1_BLEND_BLUE_SCALE, + T1_BLEND_BLUE_SHIFT, + T1_BLEND_FAMILY_BLUES, + T1_BLEND_FAMILY_OTHER_BLUES, + T1_BLEND_FORCE_BOLD, + + T1_BLEND_MAX /* do not remove */ + + } T1_Blend_Flags; + + + /* these constants are deprecated; use the corresponding */ + /* `T1_Blend_Flags` values instead */ +#define t1_blend_underline_position T1_BLEND_UNDERLINE_POSITION +#define t1_blend_underline_thickness T1_BLEND_UNDERLINE_THICKNESS +#define t1_blend_italic_angle T1_BLEND_ITALIC_ANGLE +#define t1_blend_blue_values T1_BLEND_BLUE_VALUES +#define t1_blend_other_blues T1_BLEND_OTHER_BLUES +#define t1_blend_standard_widths T1_BLEND_STANDARD_WIDTH +#define t1_blend_standard_height T1_BLEND_STANDARD_HEIGHT +#define t1_blend_stem_snap_widths T1_BLEND_STEM_SNAP_WIDTHS +#define t1_blend_stem_snap_heights T1_BLEND_STEM_SNAP_HEIGHTS +#define t1_blend_blue_scale T1_BLEND_BLUE_SCALE +#define t1_blend_blue_shift T1_BLEND_BLUE_SHIFT +#define t1_blend_family_blues T1_BLEND_FAMILY_BLUES +#define t1_blend_family_other_blues T1_BLEND_FAMILY_OTHER_BLUES +#define t1_blend_force_bold T1_BLEND_FORCE_BOLD +#define t1_blend_max T1_BLEND_MAX + + /* */ + + + /************************************************************************** + * + * @struct: + * CID_FaceDictRec + * + * @description: + * A structure used to represent data in a CID top-level dictionary. In + * most cases, they are part of the font's '/FDArray' array. Within a + * CID font file, such (internal) subfont dictionaries are enclosed by + * '%ADOBeginFontDict' and '%ADOEndFontDict' comments. + * + * Note that `CID_FaceDictRec` misses a field for the '/FontName' + * keyword, specifying the subfont's name (the top-level font name is + * given by the '/CIDFontName' keyword). This is an oversight, but it + * doesn't limit the 'cid' font module's functionality because FreeType + * neither needs this entry nor gives access to CID subfonts. + */ + typedef struct CID_FaceDictRec_ + { + PS_PrivateRec private_dict; + + FT_UInt len_buildchar; + FT_Fixed forcebold_threshold; + FT_Pos stroke_width; + FT_Fixed expansion_factor; /* this is a duplicate of */ + /* `private_dict->expansion_factor' */ + FT_Byte paint_type; + FT_Byte font_type; + FT_Matrix font_matrix; + FT_Vector font_offset; + + FT_UInt num_subrs; + FT_ULong subrmap_offset; + FT_UInt sd_bytes; + + } CID_FaceDictRec; + + + /************************************************************************** + * + * @struct: + * CID_FaceDict + * + * @description: + * A handle to a @CID_FaceDictRec structure. + */ + typedef struct CID_FaceDictRec_* CID_FaceDict; + + + /************************************************************************** + * + * @struct: + * CID_FontDict + * + * @description: + * This type is equivalent to @CID_FaceDictRec. It is deprecated but + * kept to maintain source compatibility between various versions of + * FreeType. + */ + typedef CID_FaceDictRec CID_FontDict; + + + /************************************************************************** + * + * @struct: + * CID_FaceInfoRec + * + * @description: + * A structure used to represent CID Face information. + */ + typedef struct CID_FaceInfoRec_ + { + FT_String* cid_font_name; + FT_Fixed cid_version; + FT_Int cid_font_type; + + FT_String* registry; + FT_String* ordering; + FT_Int supplement; + + PS_FontInfoRec font_info; + FT_BBox font_bbox; + FT_ULong uid_base; + + FT_Int num_xuid; + FT_ULong xuid[16]; + + FT_ULong cidmap_offset; + FT_UInt fd_bytes; + FT_UInt gd_bytes; + FT_ULong cid_count; + + FT_UInt num_dicts; + CID_FaceDict font_dicts; + + FT_ULong data_offset; + + } CID_FaceInfoRec; + + + /************************************************************************** + * + * @struct: + * CID_FaceInfo + * + * @description: + * A handle to a @CID_FaceInfoRec structure. + */ + typedef struct CID_FaceInfoRec_* CID_FaceInfo; + + + /************************************************************************** + * + * @struct: + * CID_Info + * + * @description: + * This type is equivalent to @CID_FaceInfoRec. It is deprecated but kept + * to maintain source compatibility between various versions of FreeType. + */ + typedef CID_FaceInfoRec CID_Info; + + + /************************************************************************** + * + * @function: + * FT_Has_PS_Glyph_Names + * + * @description: + * Return true if a given face provides reliable PostScript glyph names. + * This is similar to using the @FT_HAS_GLYPH_NAMES macro, except that + * certain fonts (mostly TrueType) contain incorrect glyph name tables. + * + * When this function returns true, the caller is sure that the glyph + * names returned by @FT_Get_Glyph_Name are reliable. + * + * @input: + * face :: + * face handle + * + * @return: + * Boolean. True if glyph names are reliable. + * + */ + FT_EXPORT( FT_Int ) + FT_Has_PS_Glyph_Names( FT_Face face ); + + + /************************************************************************** + * + * @function: + * FT_Get_PS_Font_Info + * + * @description: + * Retrieve the @PS_FontInfoRec structure corresponding to a given + * PostScript font. + * + * @input: + * face :: + * PostScript face handle. + * + * @output: + * afont_info :: + * A pointer to a @PS_FontInfoRec object. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * String pointers within the @PS_FontInfoRec structure are owned by the + * face and don't need to be freed by the caller. Missing entries in the + * font's FontInfo dictionary are represented by `NULL` pointers. + * + * The following font formats support this feature: 'Type~1', 'Type~42', + * 'CFF', 'CID~Type~1'. For other font formats this function returns the + * `FT_Err_Invalid_Argument` error code. + * + * @example: + * ``` + * PS_FontInfoRec font_info; + * + * + * error = FT_Get_PS_Font_Info( face, &font_info ); + * ... + * ``` + * + */ + FT_EXPORT( FT_Error ) + FT_Get_PS_Font_Info( FT_Face face, + PS_FontInfo afont_info ); + + + /************************************************************************** + * + * @function: + * FT_Get_PS_Font_Private + * + * @description: + * Retrieve the @PS_PrivateRec structure corresponding to a given + * PostScript font. + * + * @input: + * face :: + * PostScript face handle. + * + * @output: + * afont_private :: + * A pointer to a @PS_PrivateRec object. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * The string pointers within the @PS_PrivateRec structure are owned by + * the face and don't need to be freed by the caller. + * + * Only the 'Type~1' font format supports this feature. For other font + * formats this function returns the `FT_Err_Invalid_Argument` error + * code. + * + * @example: + * ``` + * PS_PrivateRec font_private; + * + * + * error = FT_Get_PS_Font_Private( face, &font_private ); + * ... + * ``` + * + */ + FT_EXPORT( FT_Error ) + FT_Get_PS_Font_Private( FT_Face face, + PS_Private afont_private ); + + + /************************************************************************** + * + * @enum: + * T1_EncodingType + * + * @description: + * An enumeration describing the 'Encoding' entry in a Type 1 dictionary. + * + * @values: + * T1_ENCODING_TYPE_NONE :: + * T1_ENCODING_TYPE_ARRAY :: + * T1_ENCODING_TYPE_STANDARD :: + * T1_ENCODING_TYPE_ISOLATIN1 :: + * T1_ENCODING_TYPE_EXPERT :: + * + * @since: + * 2.4.8 + */ + typedef enum T1_EncodingType_ + { + T1_ENCODING_TYPE_NONE = 0, + T1_ENCODING_TYPE_ARRAY, + T1_ENCODING_TYPE_STANDARD, + T1_ENCODING_TYPE_ISOLATIN1, + T1_ENCODING_TYPE_EXPERT + + } T1_EncodingType; + + + /************************************************************************** + * + * @enum: + * PS_Dict_Keys + * + * @description: + * An enumeration used in calls to @FT_Get_PS_Font_Value to identify the + * Type~1 dictionary entry to retrieve. + * + * @values: + * PS_DICT_FONT_TYPE :: + * PS_DICT_FONT_MATRIX :: + * PS_DICT_FONT_BBOX :: + * PS_DICT_PAINT_TYPE :: + * PS_DICT_FONT_NAME :: + * PS_DICT_UNIQUE_ID :: + * PS_DICT_NUM_CHAR_STRINGS :: + * PS_DICT_CHAR_STRING_KEY :: + * PS_DICT_CHAR_STRING :: + * PS_DICT_ENCODING_TYPE :: + * PS_DICT_ENCODING_ENTRY :: + * PS_DICT_NUM_SUBRS :: + * PS_DICT_SUBR :: + * PS_DICT_STD_HW :: + * PS_DICT_STD_VW :: + * PS_DICT_NUM_BLUE_VALUES :: + * PS_DICT_BLUE_VALUE :: + * PS_DICT_BLUE_FUZZ :: + * PS_DICT_NUM_OTHER_BLUES :: + * PS_DICT_OTHER_BLUE :: + * PS_DICT_NUM_FAMILY_BLUES :: + * PS_DICT_FAMILY_BLUE :: + * PS_DICT_NUM_FAMILY_OTHER_BLUES :: + * PS_DICT_FAMILY_OTHER_BLUE :: + * PS_DICT_BLUE_SCALE :: + * PS_DICT_BLUE_SHIFT :: + * PS_DICT_NUM_STEM_SNAP_H :: + * PS_DICT_STEM_SNAP_H :: + * PS_DICT_NUM_STEM_SNAP_V :: + * PS_DICT_STEM_SNAP_V :: + * PS_DICT_FORCE_BOLD :: + * PS_DICT_RND_STEM_UP :: + * PS_DICT_MIN_FEATURE :: + * PS_DICT_LEN_IV :: + * PS_DICT_PASSWORD :: + * PS_DICT_LANGUAGE_GROUP :: + * PS_DICT_VERSION :: + * PS_DICT_NOTICE :: + * PS_DICT_FULL_NAME :: + * PS_DICT_FAMILY_NAME :: + * PS_DICT_WEIGHT :: + * PS_DICT_IS_FIXED_PITCH :: + * PS_DICT_UNDERLINE_POSITION :: + * PS_DICT_UNDERLINE_THICKNESS :: + * PS_DICT_FS_TYPE :: + * PS_DICT_ITALIC_ANGLE :: + * + * @since: + * 2.4.8 + */ + typedef enum PS_Dict_Keys_ + { + /* conventionally in the font dictionary */ + PS_DICT_FONT_TYPE, /* FT_Byte */ + PS_DICT_FONT_MATRIX, /* FT_Fixed */ + PS_DICT_FONT_BBOX, /* FT_Fixed */ + PS_DICT_PAINT_TYPE, /* FT_Byte */ + PS_DICT_FONT_NAME, /* FT_String* */ + PS_DICT_UNIQUE_ID, /* FT_Int */ + PS_DICT_NUM_CHAR_STRINGS, /* FT_Int */ + PS_DICT_CHAR_STRING_KEY, /* FT_String* */ + PS_DICT_CHAR_STRING, /* FT_String* */ + PS_DICT_ENCODING_TYPE, /* T1_EncodingType */ + PS_DICT_ENCODING_ENTRY, /* FT_String* */ + + /* conventionally in the font Private dictionary */ + PS_DICT_NUM_SUBRS, /* FT_Int */ + PS_DICT_SUBR, /* FT_String* */ + PS_DICT_STD_HW, /* FT_UShort */ + PS_DICT_STD_VW, /* FT_UShort */ + PS_DICT_NUM_BLUE_VALUES, /* FT_Byte */ + PS_DICT_BLUE_VALUE, /* FT_Short */ + PS_DICT_BLUE_FUZZ, /* FT_Int */ + PS_DICT_NUM_OTHER_BLUES, /* FT_Byte */ + PS_DICT_OTHER_BLUE, /* FT_Short */ + PS_DICT_NUM_FAMILY_BLUES, /* FT_Byte */ + PS_DICT_FAMILY_BLUE, /* FT_Short */ + PS_DICT_NUM_FAMILY_OTHER_BLUES, /* FT_Byte */ + PS_DICT_FAMILY_OTHER_BLUE, /* FT_Short */ + PS_DICT_BLUE_SCALE, /* FT_Fixed */ + PS_DICT_BLUE_SHIFT, /* FT_Int */ + PS_DICT_NUM_STEM_SNAP_H, /* FT_Byte */ + PS_DICT_STEM_SNAP_H, /* FT_Short */ + PS_DICT_NUM_STEM_SNAP_V, /* FT_Byte */ + PS_DICT_STEM_SNAP_V, /* FT_Short */ + PS_DICT_FORCE_BOLD, /* FT_Bool */ + PS_DICT_RND_STEM_UP, /* FT_Bool */ + PS_DICT_MIN_FEATURE, /* FT_Short */ + PS_DICT_LEN_IV, /* FT_Int */ + PS_DICT_PASSWORD, /* FT_Long */ + PS_DICT_LANGUAGE_GROUP, /* FT_Long */ + + /* conventionally in the font FontInfo dictionary */ + PS_DICT_VERSION, /* FT_String* */ + PS_DICT_NOTICE, /* FT_String* */ + PS_DICT_FULL_NAME, /* FT_String* */ + PS_DICT_FAMILY_NAME, /* FT_String* */ + PS_DICT_WEIGHT, /* FT_String* */ + PS_DICT_IS_FIXED_PITCH, /* FT_Bool */ + PS_DICT_UNDERLINE_POSITION, /* FT_Short */ + PS_DICT_UNDERLINE_THICKNESS, /* FT_UShort */ + PS_DICT_FS_TYPE, /* FT_UShort */ + PS_DICT_ITALIC_ANGLE, /* FT_Long */ + + PS_DICT_MAX = PS_DICT_ITALIC_ANGLE + + } PS_Dict_Keys; + + + /************************************************************************** + * + * @function: + * FT_Get_PS_Font_Value + * + * @description: + * Retrieve the value for the supplied key from a PostScript font. + * + * @input: + * face :: + * PostScript face handle. + * + * key :: + * An enumeration value representing the dictionary key to retrieve. + * + * idx :: + * For array values, this specifies the index to be returned. + * + * value :: + * A pointer to memory into which to write the value. + * + * valen_len :: + * The size, in bytes, of the memory supplied for the value. + * + * @output: + * value :: + * The value matching the above key, if it exists. + * + * @return: + * The amount of memory (in bytes) required to hold the requested value + * (if it exists, -1 otherwise). + * + * @note: + * The values returned are not pointers into the internal structures of + * the face, but are 'fresh' copies, so that the memory containing them + * belongs to the calling application. This also enforces the + * 'read-only' nature of these values, i.e., this function cannot be + * used to manipulate the face. + * + * `value` is a void pointer because the values returned can be of + * various types. + * + * If either `value` is `NULL` or `value_len` is too small, just the + * required memory size for the requested entry is returned. + * + * The `idx` parameter is used, not only to retrieve elements of, for + * example, the FontMatrix or FontBBox, but also to retrieve name keys + * from the CharStrings dictionary, and the charstrings themselves. It + * is ignored for atomic values. + * + * `PS_DICT_BLUE_SCALE` returns a value that is scaled up by 1000. To + * get the value as in the font stream, you need to divide by 65536000.0 + * (to remove the FT_Fixed scale, and the x1000 scale). + * + * IMPORTANT: Only key/value pairs read by the FreeType interpreter can + * be retrieved. So, for example, PostScript procedures such as NP, ND, + * and RD are not available. Arbitrary keys are, obviously, not be + * available either. + * + * If the font's format is not PostScript-based, this function returns + * the `FT_Err_Invalid_Argument` error code. + * + * @since: + * 2.4.8 + * + */ + FT_EXPORT( FT_Long ) + FT_Get_PS_Font_Value( FT_Face face, + PS_Dict_Keys key, + FT_UInt idx, + void *value, + FT_Long value_len ); + + /* */ + +FT_END_HEADER + +#endif /* T1TABLES_H_ */ + + +/* END */ diff --git a/dependencies/linux64/include/freetype2/freetype/ttnameid.h b/dependencies/linux64/include/freetype2/freetype/ttnameid.h new file mode 100644 index 0000000..0beeca2 --- /dev/null +++ b/dependencies/linux64/include/freetype2/freetype/ttnameid.h @@ -0,0 +1,1235 @@ +/**************************************************************************** + * + * ttnameid.h + * + * TrueType name ID definitions (specification only). + * + * Copyright (C) 1996-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + +#ifndef TTNAMEID_H_ +#define TTNAMEID_H_ + + + + +FT_BEGIN_HEADER + + + /************************************************************************** + * + * @section: + * truetype_tables + */ + + + /************************************************************************** + * + * Possible values for the 'platform' identifier code in the name records + * of an SFNT 'name' table. + * + */ + + + /************************************************************************** + * + * @enum: + * TT_PLATFORM_XXX + * + * @description: + * A list of valid values for the `platform_id` identifier code in + * @FT_CharMapRec and @FT_SfntName structures. + * + * @values: + * TT_PLATFORM_APPLE_UNICODE :: + * Used by Apple to indicate a Unicode character map and/or name entry. + * See @TT_APPLE_ID_XXX for corresponding `encoding_id` values. Note + * that name entries in this format are coded as big-endian UCS-2 + * character codes _only_. + * + * TT_PLATFORM_MACINTOSH :: + * Used by Apple to indicate a MacOS-specific charmap and/or name + * entry. See @TT_MAC_ID_XXX for corresponding `encoding_id` values. + * Note that most TrueType fonts contain an Apple roman charmap to be + * usable on MacOS systems (even if they contain a Microsoft charmap as + * well). + * + * TT_PLATFORM_ISO :: + * This value was used to specify ISO/IEC 10646 charmaps. It is + * however now deprecated. See @TT_ISO_ID_XXX for a list of + * corresponding `encoding_id` values. + * + * TT_PLATFORM_MICROSOFT :: + * Used by Microsoft to indicate Windows-specific charmaps. See + * @TT_MS_ID_XXX for a list of corresponding `encoding_id` values. + * Note that most fonts contain a Unicode charmap using + * (`TT_PLATFORM_MICROSOFT`, @TT_MS_ID_UNICODE_CS). + * + * TT_PLATFORM_CUSTOM :: + * Used to indicate application-specific charmaps. + * + * TT_PLATFORM_ADOBE :: + * This value isn't part of any font format specification, but is used + * by FreeType to report Adobe-specific charmaps in an @FT_CharMapRec + * structure. See @TT_ADOBE_ID_XXX. + */ + +#define TT_PLATFORM_APPLE_UNICODE 0 +#define TT_PLATFORM_MACINTOSH 1 +#define TT_PLATFORM_ISO 2 /* deprecated */ +#define TT_PLATFORM_MICROSOFT 3 +#define TT_PLATFORM_CUSTOM 4 +#define TT_PLATFORM_ADOBE 7 /* artificial */ + + + /************************************************************************** + * + * @enum: + * TT_APPLE_ID_XXX + * + * @description: + * A list of valid values for the `encoding_id` for + * @TT_PLATFORM_APPLE_UNICODE charmaps and name entries. + * + * @values: + * TT_APPLE_ID_DEFAULT :: + * Unicode version 1.0. + * + * TT_APPLE_ID_UNICODE_1_1 :: + * Unicode 1.1; specifies Hangul characters starting at U+34xx. + * + * TT_APPLE_ID_ISO_10646 :: + * Deprecated (identical to preceding). + * + * TT_APPLE_ID_UNICODE_2_0 :: + * Unicode 2.0 and beyond (UTF-16 BMP only). + * + * TT_APPLE_ID_UNICODE_32 :: + * Unicode 3.1 and beyond, using UTF-32. + * + * TT_APPLE_ID_VARIANT_SELECTOR :: + * From Adobe, not Apple. Not a normal cmap. Specifies variations on + * a real cmap. + * + * TT_APPLE_ID_FULL_UNICODE :: + * Used for fallback fonts that provide complete Unicode coverage with + * a type~13 cmap. + */ + +#define TT_APPLE_ID_DEFAULT 0 /* Unicode 1.0 */ +#define TT_APPLE_ID_UNICODE_1_1 1 /* specify Hangul at U+34xx */ +#define TT_APPLE_ID_ISO_10646 2 /* deprecated */ +#define TT_APPLE_ID_UNICODE_2_0 3 /* or later */ +#define TT_APPLE_ID_UNICODE_32 4 /* 2.0 or later, full repertoire */ +#define TT_APPLE_ID_VARIANT_SELECTOR 5 /* variation selector data */ +#define TT_APPLE_ID_FULL_UNICODE 6 /* used with type 13 cmaps */ + + + /************************************************************************** + * + * @enum: + * TT_MAC_ID_XXX + * + * @description: + * A list of valid values for the `encoding_id` for + * @TT_PLATFORM_MACINTOSH charmaps and name entries. + */ + +#define TT_MAC_ID_ROMAN 0 +#define TT_MAC_ID_JAPANESE 1 +#define TT_MAC_ID_TRADITIONAL_CHINESE 2 +#define TT_MAC_ID_KOREAN 3 +#define TT_MAC_ID_ARABIC 4 +#define TT_MAC_ID_HEBREW 5 +#define TT_MAC_ID_GREEK 6 +#define TT_MAC_ID_RUSSIAN 7 +#define TT_MAC_ID_RSYMBOL 8 +#define TT_MAC_ID_DEVANAGARI 9 +#define TT_MAC_ID_GURMUKHI 10 +#define TT_MAC_ID_GUJARATI 11 +#define TT_MAC_ID_ORIYA 12 +#define TT_MAC_ID_BENGALI 13 +#define TT_MAC_ID_TAMIL 14 +#define TT_MAC_ID_TELUGU 15 +#define TT_MAC_ID_KANNADA 16 +#define TT_MAC_ID_MALAYALAM 17 +#define TT_MAC_ID_SINHALESE 18 +#define TT_MAC_ID_BURMESE 19 +#define TT_MAC_ID_KHMER 20 +#define TT_MAC_ID_THAI 21 +#define TT_MAC_ID_LAOTIAN 22 +#define TT_MAC_ID_GEORGIAN 23 +#define TT_MAC_ID_ARMENIAN 24 +#define TT_MAC_ID_MALDIVIAN 25 +#define TT_MAC_ID_SIMPLIFIED_CHINESE 25 +#define TT_MAC_ID_TIBETAN 26 +#define TT_MAC_ID_MONGOLIAN 27 +#define TT_MAC_ID_GEEZ 28 +#define TT_MAC_ID_SLAVIC 29 +#define TT_MAC_ID_VIETNAMESE 30 +#define TT_MAC_ID_SINDHI 31 +#define TT_MAC_ID_UNINTERP 32 + + + /************************************************************************** + * + * @enum: + * TT_ISO_ID_XXX + * + * @description: + * A list of valid values for the `encoding_id` for @TT_PLATFORM_ISO + * charmaps and name entries. + * + * Their use is now deprecated. + * + * @values: + * TT_ISO_ID_7BIT_ASCII :: + * ASCII. + * TT_ISO_ID_10646 :: + * ISO/10646. + * TT_ISO_ID_8859_1 :: + * Also known as Latin-1. + */ + +#define TT_ISO_ID_7BIT_ASCII 0 +#define TT_ISO_ID_10646 1 +#define TT_ISO_ID_8859_1 2 + + + /************************************************************************** + * + * @enum: + * TT_MS_ID_XXX + * + * @description: + * A list of valid values for the `encoding_id` for + * @TT_PLATFORM_MICROSOFT charmaps and name entries. + * + * @values: + * TT_MS_ID_SYMBOL_CS :: + * Microsoft symbol encoding. See @FT_ENCODING_MS_SYMBOL. + * + * TT_MS_ID_UNICODE_CS :: + * Microsoft WGL4 charmap, matching Unicode. See @FT_ENCODING_UNICODE. + * + * TT_MS_ID_SJIS :: + * Shift JIS Japanese encoding. See @FT_ENCODING_SJIS. + * + * TT_MS_ID_PRC :: + * Chinese encodings as used in the People's Republic of China (PRC). + * This means the encodings GB~2312 and its supersets GBK and GB~18030. + * See @FT_ENCODING_PRC. + * + * TT_MS_ID_BIG_5 :: + * Traditional Chinese as used in Taiwan and Hong Kong. See + * @FT_ENCODING_BIG5. + * + * TT_MS_ID_WANSUNG :: + * Korean Extended Wansung encoding. See @FT_ENCODING_WANSUNG. + * + * TT_MS_ID_JOHAB :: + * Korean Johab encoding. See @FT_ENCODING_JOHAB. + * + * TT_MS_ID_UCS_4 :: + * UCS-4 or UTF-32 charmaps. This has been added to the OpenType + * specification version 1.4 (mid-2001). + */ + +#define TT_MS_ID_SYMBOL_CS 0 +#define TT_MS_ID_UNICODE_CS 1 +#define TT_MS_ID_SJIS 2 +#define TT_MS_ID_PRC 3 +#define TT_MS_ID_BIG_5 4 +#define TT_MS_ID_WANSUNG 5 +#define TT_MS_ID_JOHAB 6 +#define TT_MS_ID_UCS_4 10 + + /* this value is deprecated */ +#define TT_MS_ID_GB2312 TT_MS_ID_PRC + + + /************************************************************************** + * + * @enum: + * TT_ADOBE_ID_XXX + * + * @description: + * A list of valid values for the `encoding_id` for @TT_PLATFORM_ADOBE + * charmaps. This is a FreeType-specific extension! + * + * @values: + * TT_ADOBE_ID_STANDARD :: + * Adobe standard encoding. + * TT_ADOBE_ID_EXPERT :: + * Adobe expert encoding. + * TT_ADOBE_ID_CUSTOM :: + * Adobe custom encoding. + * TT_ADOBE_ID_LATIN_1 :: + * Adobe Latin~1 encoding. + */ + +#define TT_ADOBE_ID_STANDARD 0 +#define TT_ADOBE_ID_EXPERT 1 +#define TT_ADOBE_ID_CUSTOM 2 +#define TT_ADOBE_ID_LATIN_1 3 + + + /************************************************************************** + * + * @enum: + * TT_MAC_LANGID_XXX + * + * @description: + * Possible values of the language identifier field in the name records + * of the SFNT 'name' table if the 'platform' identifier code is + * @TT_PLATFORM_MACINTOSH. These values are also used as return values + * for function @FT_Get_CMap_Language_ID. + * + * The canonical source for Apple's IDs is + * + * https://developer.apple.com/fonts/TrueType-Reference-Manual/RM06/Chap6name.html + */ + +#define TT_MAC_LANGID_ENGLISH 0 +#define TT_MAC_LANGID_FRENCH 1 +#define TT_MAC_LANGID_GERMAN 2 +#define TT_MAC_LANGID_ITALIAN 3 +#define TT_MAC_LANGID_DUTCH 4 +#define TT_MAC_LANGID_SWEDISH 5 +#define TT_MAC_LANGID_SPANISH 6 +#define TT_MAC_LANGID_DANISH 7 +#define TT_MAC_LANGID_PORTUGUESE 8 +#define TT_MAC_LANGID_NORWEGIAN 9 +#define TT_MAC_LANGID_HEBREW 10 +#define TT_MAC_LANGID_JAPANESE 11 +#define TT_MAC_LANGID_ARABIC 12 +#define TT_MAC_LANGID_FINNISH 13 +#define TT_MAC_LANGID_GREEK 14 +#define TT_MAC_LANGID_ICELANDIC 15 +#define TT_MAC_LANGID_MALTESE 16 +#define TT_MAC_LANGID_TURKISH 17 +#define TT_MAC_LANGID_CROATIAN 18 +#define TT_MAC_LANGID_CHINESE_TRADITIONAL 19 +#define TT_MAC_LANGID_URDU 20 +#define TT_MAC_LANGID_HINDI 21 +#define TT_MAC_LANGID_THAI 22 +#define TT_MAC_LANGID_KOREAN 23 +#define TT_MAC_LANGID_LITHUANIAN 24 +#define TT_MAC_LANGID_POLISH 25 +#define TT_MAC_LANGID_HUNGARIAN 26 +#define TT_MAC_LANGID_ESTONIAN 27 +#define TT_MAC_LANGID_LETTISH 28 +#define TT_MAC_LANGID_SAAMISK 29 +#define TT_MAC_LANGID_FAEROESE 30 +#define TT_MAC_LANGID_FARSI 31 +#define TT_MAC_LANGID_RUSSIAN 32 +#define TT_MAC_LANGID_CHINESE_SIMPLIFIED 33 +#define TT_MAC_LANGID_FLEMISH 34 +#define TT_MAC_LANGID_IRISH 35 +#define TT_MAC_LANGID_ALBANIAN 36 +#define TT_MAC_LANGID_ROMANIAN 37 +#define TT_MAC_LANGID_CZECH 38 +#define TT_MAC_LANGID_SLOVAK 39 +#define TT_MAC_LANGID_SLOVENIAN 40 +#define TT_MAC_LANGID_YIDDISH 41 +#define TT_MAC_LANGID_SERBIAN 42 +#define TT_MAC_LANGID_MACEDONIAN 43 +#define TT_MAC_LANGID_BULGARIAN 44 +#define TT_MAC_LANGID_UKRAINIAN 45 +#define TT_MAC_LANGID_BYELORUSSIAN 46 +#define TT_MAC_LANGID_UZBEK 47 +#define TT_MAC_LANGID_KAZAKH 48 +#define TT_MAC_LANGID_AZERBAIJANI 49 +#define TT_MAC_LANGID_AZERBAIJANI_CYRILLIC_SCRIPT 49 +#define TT_MAC_LANGID_AZERBAIJANI_ARABIC_SCRIPT 50 +#define TT_MAC_LANGID_ARMENIAN 51 +#define TT_MAC_LANGID_GEORGIAN 52 +#define TT_MAC_LANGID_MOLDAVIAN 53 +#define TT_MAC_LANGID_KIRGHIZ 54 +#define TT_MAC_LANGID_TAJIKI 55 +#define TT_MAC_LANGID_TURKMEN 56 +#define TT_MAC_LANGID_MONGOLIAN 57 +#define TT_MAC_LANGID_MONGOLIAN_MONGOLIAN_SCRIPT 57 +#define TT_MAC_LANGID_MONGOLIAN_CYRILLIC_SCRIPT 58 +#define TT_MAC_LANGID_PASHTO 59 +#define TT_MAC_LANGID_KURDISH 60 +#define TT_MAC_LANGID_KASHMIRI 61 +#define TT_MAC_LANGID_SINDHI 62 +#define TT_MAC_LANGID_TIBETAN 63 +#define TT_MAC_LANGID_NEPALI 64 +#define TT_MAC_LANGID_SANSKRIT 65 +#define TT_MAC_LANGID_MARATHI 66 +#define TT_MAC_LANGID_BENGALI 67 +#define TT_MAC_LANGID_ASSAMESE 68 +#define TT_MAC_LANGID_GUJARATI 69 +#define TT_MAC_LANGID_PUNJABI 70 +#define TT_MAC_LANGID_ORIYA 71 +#define TT_MAC_LANGID_MALAYALAM 72 +#define TT_MAC_LANGID_KANNADA 73 +#define TT_MAC_LANGID_TAMIL 74 +#define TT_MAC_LANGID_TELUGU 75 +#define TT_MAC_LANGID_SINHALESE 76 +#define TT_MAC_LANGID_BURMESE 77 +#define TT_MAC_LANGID_KHMER 78 +#define TT_MAC_LANGID_LAO 79 +#define TT_MAC_LANGID_VIETNAMESE 80 +#define TT_MAC_LANGID_INDONESIAN 81 +#define TT_MAC_LANGID_TAGALOG 82 +#define TT_MAC_LANGID_MALAY_ROMAN_SCRIPT 83 +#define TT_MAC_LANGID_MALAY_ARABIC_SCRIPT 84 +#define TT_MAC_LANGID_AMHARIC 85 +#define TT_MAC_LANGID_TIGRINYA 86 +#define TT_MAC_LANGID_GALLA 87 +#define TT_MAC_LANGID_SOMALI 88 +#define TT_MAC_LANGID_SWAHILI 89 +#define TT_MAC_LANGID_RUANDA 90 +#define TT_MAC_LANGID_RUNDI 91 +#define TT_MAC_LANGID_CHEWA 92 +#define TT_MAC_LANGID_MALAGASY 93 +#define TT_MAC_LANGID_ESPERANTO 94 +#define TT_MAC_LANGID_WELSH 128 +#define TT_MAC_LANGID_BASQUE 129 +#define TT_MAC_LANGID_CATALAN 130 +#define TT_MAC_LANGID_LATIN 131 +#define TT_MAC_LANGID_QUECHUA 132 +#define TT_MAC_LANGID_GUARANI 133 +#define TT_MAC_LANGID_AYMARA 134 +#define TT_MAC_LANGID_TATAR 135 +#define TT_MAC_LANGID_UIGHUR 136 +#define TT_MAC_LANGID_DZONGKHA 137 +#define TT_MAC_LANGID_JAVANESE 138 +#define TT_MAC_LANGID_SUNDANESE 139 + + /* The following codes are new as of 2000-03-10 */ +#define TT_MAC_LANGID_GALICIAN 140 +#define TT_MAC_LANGID_AFRIKAANS 141 +#define TT_MAC_LANGID_BRETON 142 +#define TT_MAC_LANGID_INUKTITUT 143 +#define TT_MAC_LANGID_SCOTTISH_GAELIC 144 +#define TT_MAC_LANGID_MANX_GAELIC 145 +#define TT_MAC_LANGID_IRISH_GAELIC 146 +#define TT_MAC_LANGID_TONGAN 147 +#define TT_MAC_LANGID_GREEK_POLYTONIC 148 +#define TT_MAC_LANGID_GREELANDIC 149 +#define TT_MAC_LANGID_AZERBAIJANI_ROMAN_SCRIPT 150 + + + /************************************************************************** + * + * @enum: + * TT_MS_LANGID_XXX + * + * @description: + * Possible values of the language identifier field in the name records + * of the SFNT 'name' table if the 'platform' identifier code is + * @TT_PLATFORM_MICROSOFT. These values are also used as return values + * for function @FT_Get_CMap_Language_ID. + * + * The canonical source for Microsoft's IDs is + * + * https://learn.microsoft.com/windows/win32/intl/language-identifier-constants-and-strings , + * + * however, we only provide macros for language identifiers present in + * the OpenType specification: Microsoft has abandoned the concept of + * LCIDs (language code identifiers), and format~1 of the 'name' table + * provides a better mechanism for languages not covered here. + * + * More legacy values not listed in the reference can be found in the + * @FT_TRUETYPE_IDS_H header file. + */ + +#define TT_MS_LANGID_ARABIC_SAUDI_ARABIA 0x0401 +#define TT_MS_LANGID_ARABIC_IRAQ 0x0801 +#define TT_MS_LANGID_ARABIC_EGYPT 0x0C01 +#define TT_MS_LANGID_ARABIC_LIBYA 0x1001 +#define TT_MS_LANGID_ARABIC_ALGERIA 0x1401 +#define TT_MS_LANGID_ARABIC_MOROCCO 0x1801 +#define TT_MS_LANGID_ARABIC_TUNISIA 0x1C01 +#define TT_MS_LANGID_ARABIC_OMAN 0x2001 +#define TT_MS_LANGID_ARABIC_YEMEN 0x2401 +#define TT_MS_LANGID_ARABIC_SYRIA 0x2801 +#define TT_MS_LANGID_ARABIC_JORDAN 0x2C01 +#define TT_MS_LANGID_ARABIC_LEBANON 0x3001 +#define TT_MS_LANGID_ARABIC_KUWAIT 0x3401 +#define TT_MS_LANGID_ARABIC_UAE 0x3801 +#define TT_MS_LANGID_ARABIC_BAHRAIN 0x3C01 +#define TT_MS_LANGID_ARABIC_QATAR 0x4001 +#define TT_MS_LANGID_BULGARIAN_BULGARIA 0x0402 +#define TT_MS_LANGID_CATALAN_CATALAN 0x0403 +#define TT_MS_LANGID_CHINESE_TAIWAN 0x0404 +#define TT_MS_LANGID_CHINESE_PRC 0x0804 +#define TT_MS_LANGID_CHINESE_HONG_KONG 0x0C04 +#define TT_MS_LANGID_CHINESE_SINGAPORE 0x1004 +#define TT_MS_LANGID_CHINESE_MACAO 0x1404 +#define TT_MS_LANGID_CZECH_CZECH_REPUBLIC 0x0405 +#define TT_MS_LANGID_DANISH_DENMARK 0x0406 +#define TT_MS_LANGID_GERMAN_GERMANY 0x0407 +#define TT_MS_LANGID_GERMAN_SWITZERLAND 0x0807 +#define TT_MS_LANGID_GERMAN_AUSTRIA 0x0C07 +#define TT_MS_LANGID_GERMAN_LUXEMBOURG 0x1007 +#define TT_MS_LANGID_GERMAN_LIECHTENSTEIN 0x1407 +#define TT_MS_LANGID_GREEK_GREECE 0x0408 +#define TT_MS_LANGID_ENGLISH_UNITED_STATES 0x0409 +#define TT_MS_LANGID_ENGLISH_UNITED_KINGDOM 0x0809 +#define TT_MS_LANGID_ENGLISH_AUSTRALIA 0x0C09 +#define TT_MS_LANGID_ENGLISH_CANADA 0x1009 +#define TT_MS_LANGID_ENGLISH_NEW_ZEALAND 0x1409 +#define TT_MS_LANGID_ENGLISH_IRELAND 0x1809 +#define TT_MS_LANGID_ENGLISH_SOUTH_AFRICA 0x1C09 +#define TT_MS_LANGID_ENGLISH_JAMAICA 0x2009 +#define TT_MS_LANGID_ENGLISH_CARIBBEAN 0x2409 +#define TT_MS_LANGID_ENGLISH_BELIZE 0x2809 +#define TT_MS_LANGID_ENGLISH_TRINIDAD 0x2C09 +#define TT_MS_LANGID_ENGLISH_ZIMBABWE 0x3009 +#define TT_MS_LANGID_ENGLISH_PHILIPPINES 0x3409 +#define TT_MS_LANGID_ENGLISH_INDIA 0x4009 +#define TT_MS_LANGID_ENGLISH_MALAYSIA 0x4409 +#define TT_MS_LANGID_ENGLISH_SINGAPORE 0x4809 +#define TT_MS_LANGID_SPANISH_SPAIN_TRADITIONAL_SORT 0x040A +#define TT_MS_LANGID_SPANISH_MEXICO 0x080A +#define TT_MS_LANGID_SPANISH_SPAIN_MODERN_SORT 0x0C0A +#define TT_MS_LANGID_SPANISH_GUATEMALA 0x100A +#define TT_MS_LANGID_SPANISH_COSTA_RICA 0x140A +#define TT_MS_LANGID_SPANISH_PANAMA 0x180A +#define TT_MS_LANGID_SPANISH_DOMINICAN_REPUBLIC 0x1C0A +#define TT_MS_LANGID_SPANISH_VENEZUELA 0x200A +#define TT_MS_LANGID_SPANISH_COLOMBIA 0x240A +#define TT_MS_LANGID_SPANISH_PERU 0x280A +#define TT_MS_LANGID_SPANISH_ARGENTINA 0x2C0A +#define TT_MS_LANGID_SPANISH_ECUADOR 0x300A +#define TT_MS_LANGID_SPANISH_CHILE 0x340A +#define TT_MS_LANGID_SPANISH_URUGUAY 0x380A +#define TT_MS_LANGID_SPANISH_PARAGUAY 0x3C0A +#define TT_MS_LANGID_SPANISH_BOLIVIA 0x400A +#define TT_MS_LANGID_SPANISH_EL_SALVADOR 0x440A +#define TT_MS_LANGID_SPANISH_HONDURAS 0x480A +#define TT_MS_LANGID_SPANISH_NICARAGUA 0x4C0A +#define TT_MS_LANGID_SPANISH_PUERTO_RICO 0x500A +#define TT_MS_LANGID_SPANISH_UNITED_STATES 0x540A +#define TT_MS_LANGID_FINNISH_FINLAND 0x040B +#define TT_MS_LANGID_FRENCH_FRANCE 0x040C +#define TT_MS_LANGID_FRENCH_BELGIUM 0x080C +#define TT_MS_LANGID_FRENCH_CANADA 0x0C0C +#define TT_MS_LANGID_FRENCH_SWITZERLAND 0x100C +#define TT_MS_LANGID_FRENCH_LUXEMBOURG 0x140C +#define TT_MS_LANGID_FRENCH_MONACO 0x180C +#define TT_MS_LANGID_HEBREW_ISRAEL 0x040D +#define TT_MS_LANGID_HUNGARIAN_HUNGARY 0x040E +#define TT_MS_LANGID_ICELANDIC_ICELAND 0x040F +#define TT_MS_LANGID_ITALIAN_ITALY 0x0410 +#define TT_MS_LANGID_ITALIAN_SWITZERLAND 0x0810 +#define TT_MS_LANGID_JAPANESE_JAPAN 0x0411 +#define TT_MS_LANGID_KOREAN_KOREA 0x0412 +#define TT_MS_LANGID_DUTCH_NETHERLANDS 0x0413 +#define TT_MS_LANGID_DUTCH_BELGIUM 0x0813 +#define TT_MS_LANGID_NORWEGIAN_NORWAY_BOKMAL 0x0414 +#define TT_MS_LANGID_NORWEGIAN_NORWAY_NYNORSK 0x0814 +#define TT_MS_LANGID_POLISH_POLAND 0x0415 +#define TT_MS_LANGID_PORTUGUESE_BRAZIL 0x0416 +#define TT_MS_LANGID_PORTUGUESE_PORTUGAL 0x0816 +#define TT_MS_LANGID_ROMANSH_SWITZERLAND 0x0417 +#define TT_MS_LANGID_ROMANIAN_ROMANIA 0x0418 +#define TT_MS_LANGID_RUSSIAN_RUSSIA 0x0419 +#define TT_MS_LANGID_CROATIAN_CROATIA 0x041A +#define TT_MS_LANGID_SERBIAN_SERBIA_LATIN 0x081A +#define TT_MS_LANGID_SERBIAN_SERBIA_CYRILLIC 0x0C1A +#define TT_MS_LANGID_CROATIAN_BOSNIA_HERZEGOVINA 0x101A +#define TT_MS_LANGID_BOSNIAN_BOSNIA_HERZEGOVINA 0x141A +#define TT_MS_LANGID_SERBIAN_BOSNIA_HERZ_LATIN 0x181A +#define TT_MS_LANGID_SERBIAN_BOSNIA_HERZ_CYRILLIC 0x1C1A +#define TT_MS_LANGID_BOSNIAN_BOSNIA_HERZ_CYRILLIC 0x201A +#define TT_MS_LANGID_SLOVAK_SLOVAKIA 0x041B +#define TT_MS_LANGID_ALBANIAN_ALBANIA 0x041C +#define TT_MS_LANGID_SWEDISH_SWEDEN 0x041D +#define TT_MS_LANGID_SWEDISH_FINLAND 0x081D +#define TT_MS_LANGID_THAI_THAILAND 0x041E +#define TT_MS_LANGID_TURKISH_TURKEY 0x041F +#define TT_MS_LANGID_URDU_PAKISTAN 0x0420 +#define TT_MS_LANGID_INDONESIAN_INDONESIA 0x0421 +#define TT_MS_LANGID_UKRAINIAN_UKRAINE 0x0422 +#define TT_MS_LANGID_BELARUSIAN_BELARUS 0x0423 +#define TT_MS_LANGID_SLOVENIAN_SLOVENIA 0x0424 +#define TT_MS_LANGID_ESTONIAN_ESTONIA 0x0425 +#define TT_MS_LANGID_LATVIAN_LATVIA 0x0426 +#define TT_MS_LANGID_LITHUANIAN_LITHUANIA 0x0427 +#define TT_MS_LANGID_TAJIK_TAJIKISTAN 0x0428 +#define TT_MS_LANGID_VIETNAMESE_VIET_NAM 0x042A +#define TT_MS_LANGID_ARMENIAN_ARMENIA 0x042B +#define TT_MS_LANGID_AZERI_AZERBAIJAN_LATIN 0x042C +#define TT_MS_LANGID_AZERI_AZERBAIJAN_CYRILLIC 0x082C +#define TT_MS_LANGID_BASQUE_BASQUE 0x042D +#define TT_MS_LANGID_UPPER_SORBIAN_GERMANY 0x042E +#define TT_MS_LANGID_LOWER_SORBIAN_GERMANY 0x082E +#define TT_MS_LANGID_MACEDONIAN_MACEDONIA 0x042F +#define TT_MS_LANGID_SETSWANA_SOUTH_AFRICA 0x0432 +#define TT_MS_LANGID_ISIXHOSA_SOUTH_AFRICA 0x0434 +#define TT_MS_LANGID_ISIZULU_SOUTH_AFRICA 0x0435 +#define TT_MS_LANGID_AFRIKAANS_SOUTH_AFRICA 0x0436 +#define TT_MS_LANGID_GEORGIAN_GEORGIA 0x0437 +#define TT_MS_LANGID_FAEROESE_FAEROE_ISLANDS 0x0438 +#define TT_MS_LANGID_HINDI_INDIA 0x0439 +#define TT_MS_LANGID_MALTESE_MALTA 0x043A +#define TT_MS_LANGID_SAMI_NORTHERN_NORWAY 0x043B +#define TT_MS_LANGID_SAMI_NORTHERN_SWEDEN 0x083B +#define TT_MS_LANGID_SAMI_NORTHERN_FINLAND 0x0C3B +#define TT_MS_LANGID_SAMI_LULE_NORWAY 0x103B +#define TT_MS_LANGID_SAMI_LULE_SWEDEN 0x143B +#define TT_MS_LANGID_SAMI_SOUTHERN_NORWAY 0x183B +#define TT_MS_LANGID_SAMI_SOUTHERN_SWEDEN 0x1C3B +#define TT_MS_LANGID_SAMI_SKOLT_FINLAND 0x203B +#define TT_MS_LANGID_SAMI_INARI_FINLAND 0x243B +#define TT_MS_LANGID_IRISH_IRELAND 0x083C +#define TT_MS_LANGID_MALAY_MALAYSIA 0x043E +#define TT_MS_LANGID_MALAY_BRUNEI_DARUSSALAM 0x083E +#define TT_MS_LANGID_KAZAKH_KAZAKHSTAN 0x043F +#define TT_MS_LANGID_KYRGYZ_KYRGYZSTAN /* Cyrillic */ 0x0440 +#define TT_MS_LANGID_KISWAHILI_KENYA 0x0441 +#define TT_MS_LANGID_TURKMEN_TURKMENISTAN 0x0442 +#define TT_MS_LANGID_UZBEK_UZBEKISTAN_LATIN 0x0443 +#define TT_MS_LANGID_UZBEK_UZBEKISTAN_CYRILLIC 0x0843 +#define TT_MS_LANGID_TATAR_RUSSIA 0x0444 +#define TT_MS_LANGID_BENGALI_INDIA 0x0445 +#define TT_MS_LANGID_BENGALI_BANGLADESH 0x0845 +#define TT_MS_LANGID_PUNJABI_INDIA 0x0446 +#define TT_MS_LANGID_GUJARATI_INDIA 0x0447 +#define TT_MS_LANGID_ODIA_INDIA 0x0448 +#define TT_MS_LANGID_TAMIL_INDIA 0x0449 +#define TT_MS_LANGID_TELUGU_INDIA 0x044A +#define TT_MS_LANGID_KANNADA_INDIA 0x044B +#define TT_MS_LANGID_MALAYALAM_INDIA 0x044C +#define TT_MS_LANGID_ASSAMESE_INDIA 0x044D +#define TT_MS_LANGID_MARATHI_INDIA 0x044E +#define TT_MS_LANGID_SANSKRIT_INDIA 0x044F +#define TT_MS_LANGID_MONGOLIAN_MONGOLIA /* Cyrillic */ 0x0450 +#define TT_MS_LANGID_MONGOLIAN_PRC 0x0850 +#define TT_MS_LANGID_TIBETAN_PRC 0x0451 +#define TT_MS_LANGID_WELSH_UNITED_KINGDOM 0x0452 +#define TT_MS_LANGID_KHMER_CAMBODIA 0x0453 +#define TT_MS_LANGID_LAO_LAOS 0x0454 +#define TT_MS_LANGID_GALICIAN_GALICIAN 0x0456 +#define TT_MS_LANGID_KONKANI_INDIA 0x0457 +#define TT_MS_LANGID_SYRIAC_SYRIA 0x045A +#define TT_MS_LANGID_SINHALA_SRI_LANKA 0x045B +#define TT_MS_LANGID_INUKTITUT_CANADA 0x045D +#define TT_MS_LANGID_INUKTITUT_CANADA_LATIN 0x085D +#define TT_MS_LANGID_AMHARIC_ETHIOPIA 0x045E +#define TT_MS_LANGID_TAMAZIGHT_ALGERIA 0x085F +#define TT_MS_LANGID_NEPALI_NEPAL 0x0461 +#define TT_MS_LANGID_FRISIAN_NETHERLANDS 0x0462 +#define TT_MS_LANGID_PASHTO_AFGHANISTAN 0x0463 +#define TT_MS_LANGID_FILIPINO_PHILIPPINES 0x0464 +#define TT_MS_LANGID_DHIVEHI_MALDIVES 0x0465 +#define TT_MS_LANGID_HAUSA_NIGERIA 0x0468 +#define TT_MS_LANGID_YORUBA_NIGERIA 0x046A +#define TT_MS_LANGID_QUECHUA_BOLIVIA 0x046B +#define TT_MS_LANGID_QUECHUA_ECUADOR 0x086B +#define TT_MS_LANGID_QUECHUA_PERU 0x0C6B +#define TT_MS_LANGID_SESOTHO_SA_LEBOA_SOUTH_AFRICA 0x046C +#define TT_MS_LANGID_BASHKIR_RUSSIA 0x046D +#define TT_MS_LANGID_LUXEMBOURGISH_LUXEMBOURG 0x046E +#define TT_MS_LANGID_GREENLANDIC_GREENLAND 0x046F +#define TT_MS_LANGID_IGBO_NIGERIA 0x0470 +#define TT_MS_LANGID_YI_PRC 0x0478 +#define TT_MS_LANGID_MAPUDUNGUN_CHILE 0x047A +#define TT_MS_LANGID_MOHAWK_MOHAWK 0x047C +#define TT_MS_LANGID_BRETON_FRANCE 0x047E +#define TT_MS_LANGID_UIGHUR_PRC 0x0480 +#define TT_MS_LANGID_MAORI_NEW_ZEALAND 0x0481 +#define TT_MS_LANGID_OCCITAN_FRANCE 0x0482 +#define TT_MS_LANGID_CORSICAN_FRANCE 0x0483 +#define TT_MS_LANGID_ALSATIAN_FRANCE 0x0484 +#define TT_MS_LANGID_YAKUT_RUSSIA 0x0485 +#define TT_MS_LANGID_KICHE_GUATEMALA 0x0486 +#define TT_MS_LANGID_KINYARWANDA_RWANDA 0x0487 +#define TT_MS_LANGID_WOLOF_SENEGAL 0x0488 +#define TT_MS_LANGID_DARI_AFGHANISTAN 0x048C + + /* */ + + + /* legacy macro definitions not present in OpenType 1.8.1 */ +#define TT_MS_LANGID_ARABIC_GENERAL 0x0001 +#define TT_MS_LANGID_CATALAN_SPAIN \ + TT_MS_LANGID_CATALAN_CATALAN +#define TT_MS_LANGID_CHINESE_GENERAL 0x0004 +#define TT_MS_LANGID_CHINESE_MACAU \ + TT_MS_LANGID_CHINESE_MACAO +#define TT_MS_LANGID_GERMAN_LIECHTENSTEI \ + TT_MS_LANGID_GERMAN_LIECHTENSTEIN +#define TT_MS_LANGID_ENGLISH_GENERAL 0x0009 +#define TT_MS_LANGID_ENGLISH_INDONESIA 0x3809 +#define TT_MS_LANGID_ENGLISH_HONG_KONG 0x3C09 +#define TT_MS_LANGID_SPANISH_SPAIN_INTERNATIONAL_SORT \ + TT_MS_LANGID_SPANISH_SPAIN_MODERN_SORT +#define TT_MS_LANGID_SPANISH_LATIN_AMERICA 0xE40AU +#define TT_MS_LANGID_FRENCH_WEST_INDIES 0x1C0C +#define TT_MS_LANGID_FRENCH_REUNION 0x200C +#define TT_MS_LANGID_FRENCH_CONGO 0x240C + /* which was formerly: */ +#define TT_MS_LANGID_FRENCH_ZAIRE \ + TT_MS_LANGID_FRENCH_CONGO +#define TT_MS_LANGID_FRENCH_SENEGAL 0x280C +#define TT_MS_LANGID_FRENCH_CAMEROON 0x2C0C +#define TT_MS_LANGID_FRENCH_COTE_D_IVOIRE 0x300C +#define TT_MS_LANGID_FRENCH_MALI 0x340C +#define TT_MS_LANGID_FRENCH_MOROCCO 0x380C +#define TT_MS_LANGID_FRENCH_HAITI 0x3C0C +#define TT_MS_LANGID_FRENCH_NORTH_AFRICA 0xE40CU +#define TT_MS_LANGID_KOREAN_EXTENDED_WANSUNG_KOREA \ + TT_MS_LANGID_KOREAN_KOREA +#define TT_MS_LANGID_KOREAN_JOHAB_KOREA 0x0812 +#define TT_MS_LANGID_RHAETO_ROMANIC_SWITZERLAND \ + TT_MS_LANGID_ROMANSH_SWITZERLAND +#define TT_MS_LANGID_MOLDAVIAN_MOLDAVIA 0x0818 +#define TT_MS_LANGID_RUSSIAN_MOLDAVIA 0x0819 +#define TT_MS_LANGID_URDU_INDIA 0x0820 +#define TT_MS_LANGID_CLASSIC_LITHUANIAN_LITHUANIA 0x0827 +#define TT_MS_LANGID_SLOVENE_SLOVENIA \ + TT_MS_LANGID_SLOVENIAN_SLOVENIA +#define TT_MS_LANGID_FARSI_IRAN 0x0429 +#define TT_MS_LANGID_BASQUE_SPAIN \ + TT_MS_LANGID_BASQUE_BASQUE +#define TT_MS_LANGID_SORBIAN_GERMANY \ + TT_MS_LANGID_UPPER_SORBIAN_GERMANY +#define TT_MS_LANGID_SUTU_SOUTH_AFRICA 0x0430 +#define TT_MS_LANGID_TSONGA_SOUTH_AFRICA 0x0431 +#define TT_MS_LANGID_TSWANA_SOUTH_AFRICA \ + TT_MS_LANGID_SETSWANA_SOUTH_AFRICA +#define TT_MS_LANGID_VENDA_SOUTH_AFRICA 0x0433 +#define TT_MS_LANGID_XHOSA_SOUTH_AFRICA \ + TT_MS_LANGID_ISIXHOSA_SOUTH_AFRICA +#define TT_MS_LANGID_ZULU_SOUTH_AFRICA \ + TT_MS_LANGID_ISIZULU_SOUTH_AFRICA +#define TT_MS_LANGID_SAAMI_LAPONIA 0x043B + /* the next two values are incorrectly inverted */ +#define TT_MS_LANGID_IRISH_GAELIC_IRELAND 0x043C +#define TT_MS_LANGID_SCOTTISH_GAELIC_UNITED_KINGDOM 0x083C +#define TT_MS_LANGID_YIDDISH_GERMANY 0x043D +#define TT_MS_LANGID_KAZAK_KAZAKSTAN \ + TT_MS_LANGID_KAZAKH_KAZAKHSTAN +#define TT_MS_LANGID_KIRGHIZ_KIRGHIZ_REPUBLIC \ + TT_MS_LANGID_KYRGYZ_KYRGYZSTAN +#define TT_MS_LANGID_KIRGHIZ_KIRGHIZSTAN \ + TT_MS_LANGID_KYRGYZ_KYRGYZSTAN +#define TT_MS_LANGID_SWAHILI_KENYA \ + TT_MS_LANGID_KISWAHILI_KENYA +#define TT_MS_LANGID_TATAR_TATARSTAN \ + TT_MS_LANGID_TATAR_RUSSIA +#define TT_MS_LANGID_PUNJABI_ARABIC_PAKISTAN 0x0846 +#define TT_MS_LANGID_ORIYA_INDIA \ + TT_MS_LANGID_ODIA_INDIA +#define TT_MS_LANGID_MONGOLIAN_MONGOLIA_MONGOLIAN \ + TT_MS_LANGID_MONGOLIAN_PRC +#define TT_MS_LANGID_TIBETAN_CHINA \ + TT_MS_LANGID_TIBETAN_PRC +#define TT_MS_LANGID_DZONGHKA_BHUTAN 0x0851 +#define TT_MS_LANGID_TIBETAN_BHUTAN \ + TT_MS_LANGID_DZONGHKA_BHUTAN +#define TT_MS_LANGID_WELSH_WALES \ + TT_MS_LANGID_WELSH_UNITED_KINGDOM +#define TT_MS_LANGID_BURMESE_MYANMAR 0x0455 +#define TT_MS_LANGID_GALICIAN_SPAIN \ + TT_MS_LANGID_GALICIAN_GALICIAN +#define TT_MS_LANGID_MANIPURI_INDIA /* Bengali */ 0x0458 +#define TT_MS_LANGID_SINDHI_INDIA /* Arabic */ 0x0459 +#define TT_MS_LANGID_SINDHI_PAKISTAN 0x0859 +#define TT_MS_LANGID_SINHALESE_SRI_LANKA \ + TT_MS_LANGID_SINHALA_SRI_LANKA +#define TT_MS_LANGID_CHEROKEE_UNITED_STATES 0x045C +#define TT_MS_LANGID_TAMAZIGHT_MOROCCO /* Arabic */ 0x045F +#define TT_MS_LANGID_TAMAZIGHT_MOROCCO_LATIN \ + TT_MS_LANGID_TAMAZIGHT_ALGERIA +#define TT_MS_LANGID_KASHMIRI_PAKISTAN /* Arabic */ 0x0460 +#define TT_MS_LANGID_KASHMIRI_SASIA 0x0860 +#define TT_MS_LANGID_KASHMIRI_INDIA \ + TT_MS_LANGID_KASHMIRI_SASIA +#define TT_MS_LANGID_NEPALI_INDIA 0x0861 +#define TT_MS_LANGID_DIVEHI_MALDIVES \ + TT_MS_LANGID_DHIVEHI_MALDIVES +#define TT_MS_LANGID_EDO_NIGERIA 0x0466 +#define TT_MS_LANGID_FULFULDE_NIGERIA 0x0467 +#define TT_MS_LANGID_IBIBIO_NIGERIA 0x0469 +#define TT_MS_LANGID_SEPEDI_SOUTH_AFRICA \ + TT_MS_LANGID_SESOTHO_SA_LEBOA_SOUTH_AFRICA +#define TT_MS_LANGID_SOTHO_SOUTHERN_SOUTH_AFRICA \ + TT_MS_LANGID_SESOTHO_SA_LEBOA_SOUTH_AFRICA +#define TT_MS_LANGID_KANURI_NIGERIA 0x0471 +#define TT_MS_LANGID_OROMO_ETHIOPIA 0x0472 +#define TT_MS_LANGID_TIGRIGNA_ETHIOPIA 0x0473 +#define TT_MS_LANGID_TIGRIGNA_ERYTHREA 0x0873 +#define TT_MS_LANGID_TIGRIGNA_ERYTREA \ + TT_MS_LANGID_TIGRIGNA_ERYTHREA +#define TT_MS_LANGID_GUARANI_PARAGUAY 0x0474 +#define TT_MS_LANGID_HAWAIIAN_UNITED_STATES 0x0475 +#define TT_MS_LANGID_LATIN 0x0476 +#define TT_MS_LANGID_SOMALI_SOMALIA 0x0477 +#define TT_MS_LANGID_YI_CHINA \ + TT_MS_LANGID_YI_PRC +#define TT_MS_LANGID_PAPIAMENTU_NETHERLANDS_ANTILLES 0x0479 +#define TT_MS_LANGID_UIGHUR_CHINA \ + TT_MS_LANGID_UIGHUR_PRC + + + /************************************************************************** + * + * @enum: + * TT_NAME_ID_XXX + * + * @description: + * Possible values of the 'name' identifier field in the name records of + * an SFNT 'name' table. These values are platform independent. + */ + +#define TT_NAME_ID_COPYRIGHT 0 +#define TT_NAME_ID_FONT_FAMILY 1 +#define TT_NAME_ID_FONT_SUBFAMILY 2 +#define TT_NAME_ID_UNIQUE_ID 3 +#define TT_NAME_ID_FULL_NAME 4 +#define TT_NAME_ID_VERSION_STRING 5 +#define TT_NAME_ID_PS_NAME 6 +#define TT_NAME_ID_TRADEMARK 7 + + /* the following values are from the OpenType spec */ +#define TT_NAME_ID_MANUFACTURER 8 +#define TT_NAME_ID_DESIGNER 9 +#define TT_NAME_ID_DESCRIPTION 10 +#define TT_NAME_ID_VENDOR_URL 11 +#define TT_NAME_ID_DESIGNER_URL 12 +#define TT_NAME_ID_LICENSE 13 +#define TT_NAME_ID_LICENSE_URL 14 + /* number 15 is reserved */ +#define TT_NAME_ID_TYPOGRAPHIC_FAMILY 16 +#define TT_NAME_ID_TYPOGRAPHIC_SUBFAMILY 17 +#define TT_NAME_ID_MAC_FULL_NAME 18 + + /* The following code is new as of 2000-01-21 */ +#define TT_NAME_ID_SAMPLE_TEXT 19 + + /* This is new in OpenType 1.3 */ +#define TT_NAME_ID_CID_FINDFONT_NAME 20 + + /* This is new in OpenType 1.5 */ +#define TT_NAME_ID_WWS_FAMILY 21 +#define TT_NAME_ID_WWS_SUBFAMILY 22 + + /* This is new in OpenType 1.7 */ +#define TT_NAME_ID_LIGHT_BACKGROUND 23 +#define TT_NAME_ID_DARK_BACKGROUND 24 + + /* This is new in OpenType 1.8 */ +#define TT_NAME_ID_VARIATIONS_PREFIX 25 + + /* these two values are deprecated */ +#define TT_NAME_ID_PREFERRED_FAMILY TT_NAME_ID_TYPOGRAPHIC_FAMILY +#define TT_NAME_ID_PREFERRED_SUBFAMILY TT_NAME_ID_TYPOGRAPHIC_SUBFAMILY + + + /************************************************************************** + * + * @enum: + * TT_UCR_XXX + * + * @description: + * Possible bit mask values for the `ulUnicodeRangeX` fields in an SFNT + * 'OS/2' table. + */ + + /* ulUnicodeRange1 */ + /* --------------- */ + + /* Bit 0 Basic Latin */ +#define TT_UCR_BASIC_LATIN (1UL << 0) /* U+0020-U+007E */ + /* Bit 1 C1 Controls and Latin-1 Supplement */ +#define TT_UCR_LATIN1_SUPPLEMENT (1UL << 1) /* U+0080-U+00FF */ + /* Bit 2 Latin Extended-A */ +#define TT_UCR_LATIN_EXTENDED_A (1UL << 2) /* U+0100-U+017F */ + /* Bit 3 Latin Extended-B */ +#define TT_UCR_LATIN_EXTENDED_B (1UL << 3) /* U+0180-U+024F */ + /* Bit 4 IPA Extensions */ + /* Phonetic Extensions */ + /* Phonetic Extensions Supplement */ +#define TT_UCR_IPA_EXTENSIONS (1UL << 4) /* U+0250-U+02AF */ + /* U+1D00-U+1D7F */ + /* U+1D80-U+1DBF */ + /* Bit 5 Spacing Modifier Letters */ + /* Modifier Tone Letters */ +#define TT_UCR_SPACING_MODIFIER (1UL << 5) /* U+02B0-U+02FF */ + /* U+A700-U+A71F */ + /* Bit 6 Combining Diacritical Marks */ + /* Combining Diacritical Marks Supplement */ +#define TT_UCR_COMBINING_DIACRITICAL_MARKS (1UL << 6) /* U+0300-U+036F */ + /* U+1DC0-U+1DFF */ + /* Bit 7 Greek and Coptic */ +#define TT_UCR_GREEK (1UL << 7) /* U+0370-U+03FF */ + /* Bit 8 Coptic */ +#define TT_UCR_COPTIC (1UL << 8) /* U+2C80-U+2CFF */ + /* Bit 9 Cyrillic */ + /* Cyrillic Supplement */ + /* Cyrillic Extended-A */ + /* Cyrillic Extended-B */ +#define TT_UCR_CYRILLIC (1UL << 9) /* U+0400-U+04FF */ + /* U+0500-U+052F */ + /* U+2DE0-U+2DFF */ + /* U+A640-U+A69F */ + /* Bit 10 Armenian */ +#define TT_UCR_ARMENIAN (1UL << 10) /* U+0530-U+058F */ + /* Bit 11 Hebrew */ +#define TT_UCR_HEBREW (1UL << 11) /* U+0590-U+05FF */ + /* Bit 12 Vai */ +#define TT_UCR_VAI (1UL << 12) /* U+A500-U+A63F */ + /* Bit 13 Arabic */ + /* Arabic Supplement */ +#define TT_UCR_ARABIC (1UL << 13) /* U+0600-U+06FF */ + /* U+0750-U+077F */ + /* Bit 14 NKo */ +#define TT_UCR_NKO (1UL << 14) /* U+07C0-U+07FF */ + /* Bit 15 Devanagari */ +#define TT_UCR_DEVANAGARI (1UL << 15) /* U+0900-U+097F */ + /* Bit 16 Bangla (Bengali) */ +#define TT_UCR_BENGALI (1UL << 16) /* U+0980-U+09FF */ + /* Bit 17 Gurmukhi */ +#define TT_UCR_GURMUKHI (1UL << 17) /* U+0A00-U+0A7F */ + /* Bit 18 Gujarati */ +#define TT_UCR_GUJARATI (1UL << 18) /* U+0A80-U+0AFF */ + /* Bit 19 Oriya (Odia) */ +#define TT_UCR_ORIYA (1UL << 19) /* U+0B00-U+0B7F */ + /* Bit 20 Tamil */ +#define TT_UCR_TAMIL (1UL << 20) /* U+0B80-U+0BFF */ + /* Bit 21 Telugu */ +#define TT_UCR_TELUGU (1UL << 21) /* U+0C00-U+0C7F */ + /* Bit 22 Kannada */ +#define TT_UCR_KANNADA (1UL << 22) /* U+0C80-U+0CFF */ + /* Bit 23 Malayalam */ +#define TT_UCR_MALAYALAM (1UL << 23) /* U+0D00-U+0D7F */ + /* Bit 24 Thai */ +#define TT_UCR_THAI (1UL << 24) /* U+0E00-U+0E7F */ + /* Bit 25 Lao */ +#define TT_UCR_LAO (1UL << 25) /* U+0E80-U+0EFF */ + /* Bit 26 Georgian */ + /* Georgian Supplement */ +#define TT_UCR_GEORGIAN (1UL << 26) /* U+10A0-U+10FF */ + /* U+2D00-U+2D2F */ + /* Bit 27 Balinese */ +#define TT_UCR_BALINESE (1UL << 27) /* U+1B00-U+1B7F */ + /* Bit 28 Hangul Jamo */ +#define TT_UCR_HANGUL_JAMO (1UL << 28) /* U+1100-U+11FF */ + /* Bit 29 Latin Extended Additional */ + /* Latin Extended-C */ + /* Latin Extended-D */ +#define TT_UCR_LATIN_EXTENDED_ADDITIONAL (1UL << 29) /* U+1E00-U+1EFF */ + /* U+2C60-U+2C7F */ + /* U+A720-U+A7FF */ + /* Bit 30 Greek Extended */ +#define TT_UCR_GREEK_EXTENDED (1UL << 30) /* U+1F00-U+1FFF */ + /* Bit 31 General Punctuation */ + /* Supplemental Punctuation */ +#define TT_UCR_GENERAL_PUNCTUATION (1UL << 31) /* U+2000-U+206F */ + /* U+2E00-U+2E7F */ + + /* ulUnicodeRange2 */ + /* --------------- */ + + /* Bit 32 Superscripts And Subscripts */ +#define TT_UCR_SUPERSCRIPTS_SUBSCRIPTS (1UL << 0) /* U+2070-U+209F */ + /* Bit 33 Currency Symbols */ +#define TT_UCR_CURRENCY_SYMBOLS (1UL << 1) /* U+20A0-U+20CF */ + /* Bit 34 Combining Diacritical Marks For Symbols */ +#define TT_UCR_COMBINING_DIACRITICAL_MARKS_SYMB \ + (1UL << 2) /* U+20D0-U+20FF */ + /* Bit 35 Letterlike Symbols */ +#define TT_UCR_LETTERLIKE_SYMBOLS (1UL << 3) /* U+2100-U+214F */ + /* Bit 36 Number Forms */ +#define TT_UCR_NUMBER_FORMS (1UL << 4) /* U+2150-U+218F */ + /* Bit 37 Arrows */ + /* Supplemental Arrows-A */ + /* Supplemental Arrows-B */ + /* Miscellaneous Symbols and Arrows */ +#define TT_UCR_ARROWS (1UL << 5) /* U+2190-U+21FF */ + /* U+27F0-U+27FF */ + /* U+2900-U+297F */ + /* U+2B00-U+2BFF */ + /* Bit 38 Mathematical Operators */ + /* Supplemental Mathematical Operators */ + /* Miscellaneous Mathematical Symbols-A */ + /* Miscellaneous Mathematical Symbols-B */ +#define TT_UCR_MATHEMATICAL_OPERATORS (1UL << 6) /* U+2200-U+22FF */ + /* U+2A00-U+2AFF */ + /* U+27C0-U+27EF */ + /* U+2980-U+29FF */ + /* Bit 39 Miscellaneous Technical */ +#define TT_UCR_MISCELLANEOUS_TECHNICAL (1UL << 7) /* U+2300-U+23FF */ + /* Bit 40 Control Pictures */ +#define TT_UCR_CONTROL_PICTURES (1UL << 8) /* U+2400-U+243F */ + /* Bit 41 Optical Character Recognition */ +#define TT_UCR_OCR (1UL << 9) /* U+2440-U+245F */ + /* Bit 42 Enclosed Alphanumerics */ +#define TT_UCR_ENCLOSED_ALPHANUMERICS (1UL << 10) /* U+2460-U+24FF */ + /* Bit 43 Box Drawing */ +#define TT_UCR_BOX_DRAWING (1UL << 11) /* U+2500-U+257F */ + /* Bit 44 Block Elements */ +#define TT_UCR_BLOCK_ELEMENTS (1UL << 12) /* U+2580-U+259F */ + /* Bit 45 Geometric Shapes */ +#define TT_UCR_GEOMETRIC_SHAPES (1UL << 13) /* U+25A0-U+25FF */ + /* Bit 46 Miscellaneous Symbols */ +#define TT_UCR_MISCELLANEOUS_SYMBOLS (1UL << 14) /* U+2600-U+26FF */ + /* Bit 47 Dingbats */ +#define TT_UCR_DINGBATS (1UL << 15) /* U+2700-U+27BF */ + /* Bit 48 CJK Symbols and Punctuation */ +#define TT_UCR_CJK_SYMBOLS (1UL << 16) /* U+3000-U+303F */ + /* Bit 49 Hiragana */ +#define TT_UCR_HIRAGANA (1UL << 17) /* U+3040-U+309F */ + /* Bit 50 Katakana */ + /* Katakana Phonetic Extensions */ +#define TT_UCR_KATAKANA (1UL << 18) /* U+30A0-U+30FF */ + /* U+31F0-U+31FF */ + /* Bit 51 Bopomofo */ + /* Bopomofo Extended */ +#define TT_UCR_BOPOMOFO (1UL << 19) /* U+3100-U+312F */ + /* U+31A0-U+31BF */ + /* Bit 52 Hangul Compatibility Jamo */ +#define TT_UCR_HANGUL_COMPATIBILITY_JAMO (1UL << 20) /* U+3130-U+318F */ + /* Bit 53 Phags-Pa */ +#define TT_UCR_PHAGSPA (1UL << 21) /* U+A840-U+A87F */ +#define TT_UCR_KANBUN TT_UCR_PHAGSPA /* deprecated */ +#define TT_UCR_CJK_MISC TT_UCR_PHAGSPA /* deprecated */ + /* Bit 54 Enclosed CJK Letters and Months */ +#define TT_UCR_ENCLOSED_CJK_LETTERS_MONTHS (1UL << 22) /* U+3200-U+32FF */ + /* Bit 55 CJK Compatibility */ +#define TT_UCR_CJK_COMPATIBILITY (1UL << 23) /* U+3300-U+33FF */ + /* Bit 56 Hangul Syllables */ +#define TT_UCR_HANGUL (1UL << 24) /* U+AC00-U+D7A3 */ + /* Bit 57 High Surrogates */ + /* High Private Use Surrogates */ + /* Low Surrogates */ + + /* According to OpenType specs v.1.3+, */ + /* setting bit 57 implies that there is */ + /* at least one codepoint beyond the */ + /* Basic Multilingual Plane that is */ + /* supported by this font. So it really */ + /* means >= U+10000. */ +#define TT_UCR_SURROGATES (1UL << 25) /* U+D800-U+DB7F */ + /* U+DB80-U+DBFF */ + /* U+DC00-U+DFFF */ +#define TT_UCR_NON_PLANE_0 TT_UCR_SURROGATES + /* Bit 58 Phoenician */ +#define TT_UCR_PHOENICIAN (1UL << 26) /*U+10900-U+1091F*/ + /* Bit 59 CJK Unified Ideographs */ + /* CJK Radicals Supplement */ + /* Kangxi Radicals */ + /* Ideographic Description Characters */ + /* CJK Unified Ideographs Extension A */ + /* CJK Unified Ideographs Extension B */ + /* Kanbun */ +#define TT_UCR_CJK_UNIFIED_IDEOGRAPHS (1UL << 27) /* U+4E00-U+9FFF */ + /* U+2E80-U+2EFF */ + /* U+2F00-U+2FDF */ + /* U+2FF0-U+2FFF */ + /* U+3400-U+4DB5 */ + /*U+20000-U+2A6DF*/ + /* U+3190-U+319F */ + /* Bit 60 Private Use */ +#define TT_UCR_PRIVATE_USE (1UL << 28) /* U+E000-U+F8FF */ + /* Bit 61 CJK Strokes */ + /* CJK Compatibility Ideographs */ + /* CJK Compatibility Ideographs Supplement */ +#define TT_UCR_CJK_COMPATIBILITY_IDEOGRAPHS (1UL << 29) /* U+31C0-U+31EF */ + /* U+F900-U+FAFF */ + /*U+2F800-U+2FA1F*/ + /* Bit 62 Alphabetic Presentation Forms */ +#define TT_UCR_ALPHABETIC_PRESENTATION_FORMS (1UL << 30) /* U+FB00-U+FB4F */ + /* Bit 63 Arabic Presentation Forms-A */ +#define TT_UCR_ARABIC_PRESENTATION_FORMS_A (1UL << 31) /* U+FB50-U+FDFF */ + + /* ulUnicodeRange3 */ + /* --------------- */ + + /* Bit 64 Combining Half Marks */ +#define TT_UCR_COMBINING_HALF_MARKS (1UL << 0) /* U+FE20-U+FE2F */ + /* Bit 65 Vertical forms */ + /* CJK Compatibility Forms */ +#define TT_UCR_CJK_COMPATIBILITY_FORMS (1UL << 1) /* U+FE10-U+FE1F */ + /* U+FE30-U+FE4F */ + /* Bit 66 Small Form Variants */ +#define TT_UCR_SMALL_FORM_VARIANTS (1UL << 2) /* U+FE50-U+FE6F */ + /* Bit 67 Arabic Presentation Forms-B */ +#define TT_UCR_ARABIC_PRESENTATION_FORMS_B (1UL << 3) /* U+FE70-U+FEFF */ + /* Bit 68 Halfwidth and Fullwidth Forms */ +#define TT_UCR_HALFWIDTH_FULLWIDTH_FORMS (1UL << 4) /* U+FF00-U+FFEF */ + /* Bit 69 Specials */ +#define TT_UCR_SPECIALS (1UL << 5) /* U+FFF0-U+FFFF */ + /* Bit 70 Tibetan */ +#define TT_UCR_TIBETAN (1UL << 6) /* U+0F00-U+0FFF */ + /* Bit 71 Syriac */ +#define TT_UCR_SYRIAC (1UL << 7) /* U+0700-U+074F */ + /* Bit 72 Thaana */ +#define TT_UCR_THAANA (1UL << 8) /* U+0780-U+07BF */ + /* Bit 73 Sinhala */ +#define TT_UCR_SINHALA (1UL << 9) /* U+0D80-U+0DFF */ + /* Bit 74 Myanmar */ +#define TT_UCR_MYANMAR (1UL << 10) /* U+1000-U+109F */ + /* Bit 75 Ethiopic */ + /* Ethiopic Supplement */ + /* Ethiopic Extended */ +#define TT_UCR_ETHIOPIC (1UL << 11) /* U+1200-U+137F */ + /* U+1380-U+139F */ + /* U+2D80-U+2DDF */ + /* Bit 76 Cherokee */ +#define TT_UCR_CHEROKEE (1UL << 12) /* U+13A0-U+13FF */ + /* Bit 77 Unified Canadian Aboriginal Syllabics */ +#define TT_UCR_CANADIAN_ABORIGINAL_SYLLABICS (1UL << 13) /* U+1400-U+167F */ + /* Bit 78 Ogham */ +#define TT_UCR_OGHAM (1UL << 14) /* U+1680-U+169F */ + /* Bit 79 Runic */ +#define TT_UCR_RUNIC (1UL << 15) /* U+16A0-U+16FF */ + /* Bit 80 Khmer */ + /* Khmer Symbols */ +#define TT_UCR_KHMER (1UL << 16) /* U+1780-U+17FF */ + /* U+19E0-U+19FF */ + /* Bit 81 Mongolian */ +#define TT_UCR_MONGOLIAN (1UL << 17) /* U+1800-U+18AF */ + /* Bit 82 Braille Patterns */ +#define TT_UCR_BRAILLE (1UL << 18) /* U+2800-U+28FF */ + /* Bit 83 Yi Syllables */ + /* Yi Radicals */ +#define TT_UCR_YI (1UL << 19) /* U+A000-U+A48F */ + /* U+A490-U+A4CF */ + /* Bit 84 Tagalog */ + /* Hanunoo */ + /* Buhid */ + /* Tagbanwa */ +#define TT_UCR_PHILIPPINE (1UL << 20) /* U+1700-U+171F */ + /* U+1720-U+173F */ + /* U+1740-U+175F */ + /* U+1760-U+177F */ + /* Bit 85 Old Italic */ +#define TT_UCR_OLD_ITALIC (1UL << 21) /*U+10300-U+1032F*/ + /* Bit 86 Gothic */ +#define TT_UCR_GOTHIC (1UL << 22) /*U+10330-U+1034F*/ + /* Bit 87 Deseret */ +#define TT_UCR_DESERET (1UL << 23) /*U+10400-U+1044F*/ + /* Bit 88 Byzantine Musical Symbols */ + /* Musical Symbols */ + /* Ancient Greek Musical Notation */ +#define TT_UCR_MUSICAL_SYMBOLS (1UL << 24) /*U+1D000-U+1D0FF*/ + /*U+1D100-U+1D1FF*/ + /*U+1D200-U+1D24F*/ + /* Bit 89 Mathematical Alphanumeric Symbols */ +#define TT_UCR_MATH_ALPHANUMERIC_SYMBOLS (1UL << 25) /*U+1D400-U+1D7FF*/ + /* Bit 90 Private Use (plane 15) */ + /* Private Use (plane 16) */ +#define TT_UCR_PRIVATE_USE_SUPPLEMENTARY (1UL << 26) /*U+F0000-U+FFFFD*/ + /*U+100000-U+10FFFD*/ + /* Bit 91 Variation Selectors */ + /* Variation Selectors Supplement */ +#define TT_UCR_VARIATION_SELECTORS (1UL << 27) /* U+FE00-U+FE0F */ + /*U+E0100-U+E01EF*/ + /* Bit 92 Tags */ +#define TT_UCR_TAGS (1UL << 28) /*U+E0000-U+E007F*/ + /* Bit 93 Limbu */ +#define TT_UCR_LIMBU (1UL << 29) /* U+1900-U+194F */ + /* Bit 94 Tai Le */ +#define TT_UCR_TAI_LE (1UL << 30) /* U+1950-U+197F */ + /* Bit 95 New Tai Lue */ +#define TT_UCR_NEW_TAI_LUE (1UL << 31) /* U+1980-U+19DF */ + + /* ulUnicodeRange4 */ + /* --------------- */ + + /* Bit 96 Buginese */ +#define TT_UCR_BUGINESE (1UL << 0) /* U+1A00-U+1A1F */ + /* Bit 97 Glagolitic */ +#define TT_UCR_GLAGOLITIC (1UL << 1) /* U+2C00-U+2C5F */ + /* Bit 98 Tifinagh */ +#define TT_UCR_TIFINAGH (1UL << 2) /* U+2D30-U+2D7F */ + /* Bit 99 Yijing Hexagram Symbols */ +#define TT_UCR_YIJING (1UL << 3) /* U+4DC0-U+4DFF */ + /* Bit 100 Syloti Nagri */ +#define TT_UCR_SYLOTI_NAGRI (1UL << 4) /* U+A800-U+A82F */ + /* Bit 101 Linear B Syllabary */ + /* Linear B Ideograms */ + /* Aegean Numbers */ +#define TT_UCR_LINEAR_B (1UL << 5) /*U+10000-U+1007F*/ + /*U+10080-U+100FF*/ + /*U+10100-U+1013F*/ + /* Bit 102 Ancient Greek Numbers */ +#define TT_UCR_ANCIENT_GREEK_NUMBERS (1UL << 6) /*U+10140-U+1018F*/ + /* Bit 103 Ugaritic */ +#define TT_UCR_UGARITIC (1UL << 7) /*U+10380-U+1039F*/ + /* Bit 104 Old Persian */ +#define TT_UCR_OLD_PERSIAN (1UL << 8) /*U+103A0-U+103DF*/ + /* Bit 105 Shavian */ +#define TT_UCR_SHAVIAN (1UL << 9) /*U+10450-U+1047F*/ + /* Bit 106 Osmanya */ +#define TT_UCR_OSMANYA (1UL << 10) /*U+10480-U+104AF*/ + /* Bit 107 Cypriot Syllabary */ +#define TT_UCR_CYPRIOT_SYLLABARY (1UL << 11) /*U+10800-U+1083F*/ + /* Bit 108 Kharoshthi */ +#define TT_UCR_KHAROSHTHI (1UL << 12) /*U+10A00-U+10A5F*/ + /* Bit 109 Tai Xuan Jing Symbols */ +#define TT_UCR_TAI_XUAN_JING (1UL << 13) /*U+1D300-U+1D35F*/ + /* Bit 110 Cuneiform */ + /* Cuneiform Numbers and Punctuation */ +#define TT_UCR_CUNEIFORM (1UL << 14) /*U+12000-U+123FF*/ + /*U+12400-U+1247F*/ + /* Bit 111 Counting Rod Numerals */ +#define TT_UCR_COUNTING_ROD_NUMERALS (1UL << 15) /*U+1D360-U+1D37F*/ + /* Bit 112 Sundanese */ +#define TT_UCR_SUNDANESE (1UL << 16) /* U+1B80-U+1BBF */ + /* Bit 113 Lepcha */ +#define TT_UCR_LEPCHA (1UL << 17) /* U+1C00-U+1C4F */ + /* Bit 114 Ol Chiki */ +#define TT_UCR_OL_CHIKI (1UL << 18) /* U+1C50-U+1C7F */ + /* Bit 115 Saurashtra */ +#define TT_UCR_SAURASHTRA (1UL << 19) /* U+A880-U+A8DF */ + /* Bit 116 Kayah Li */ +#define TT_UCR_KAYAH_LI (1UL << 20) /* U+A900-U+A92F */ + /* Bit 117 Rejang */ +#define TT_UCR_REJANG (1UL << 21) /* U+A930-U+A95F */ + /* Bit 118 Cham */ +#define TT_UCR_CHAM (1UL << 22) /* U+AA00-U+AA5F */ + /* Bit 119 Ancient Symbols */ +#define TT_UCR_ANCIENT_SYMBOLS (1UL << 23) /*U+10190-U+101CF*/ + /* Bit 120 Phaistos Disc */ +#define TT_UCR_PHAISTOS_DISC (1UL << 24) /*U+101D0-U+101FF*/ + /* Bit 121 Carian */ + /* Lycian */ + /* Lydian */ +#define TT_UCR_OLD_ANATOLIAN (1UL << 25) /*U+102A0-U+102DF*/ + /*U+10280-U+1029F*/ + /*U+10920-U+1093F*/ + /* Bit 122 Domino Tiles */ + /* Mahjong Tiles */ +#define TT_UCR_GAME_TILES (1UL << 26) /*U+1F030-U+1F09F*/ + /*U+1F000-U+1F02F*/ + /* Bit 123-127 Reserved for process-internal usage */ + + /* */ + + /* for backward compatibility with older FreeType versions */ +#define TT_UCR_ARABIC_PRESENTATION_A \ + TT_UCR_ARABIC_PRESENTATION_FORMS_A +#define TT_UCR_ARABIC_PRESENTATION_B \ + TT_UCR_ARABIC_PRESENTATION_FORMS_B + +#define TT_UCR_COMBINING_DIACRITICS \ + TT_UCR_COMBINING_DIACRITICAL_MARKS +#define TT_UCR_COMBINING_DIACRITICS_SYMB \ + TT_UCR_COMBINING_DIACRITICAL_MARKS_SYMB + + +FT_END_HEADER + +#endif /* TTNAMEID_H_ */ + + +/* END */ diff --git a/dependencies/linux64/include/freetype2/freetype/tttables.h b/dependencies/linux64/include/freetype2/freetype/tttables.h new file mode 100644 index 0000000..ae95533 --- /dev/null +++ b/dependencies/linux64/include/freetype2/freetype/tttables.h @@ -0,0 +1,859 @@ +/**************************************************************************** + * + * tttables.h + * + * Basic SFNT/TrueType tables definitions and interface + * (specification only). + * + * Copyright (C) 1996-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + +#ifndef TTTABLES_H_ +#define TTTABLES_H_ + + +#include + +#ifdef FREETYPE_H +#error "freetype.h of FreeType 1 has been loaded!" +#error "Please fix the directory search order for header files" +#error "so that freetype.h of FreeType 2 is found first." +#endif + + +FT_BEGIN_HEADER + + /************************************************************************** + * + * @section: + * truetype_tables + * + * @title: + * TrueType Tables + * + * @abstract: + * TrueType-specific table types and functions. + * + * @description: + * This section contains definitions of some basic tables specific to + * TrueType and OpenType as well as some routines used to access and + * process them. + * + * @order: + * TT_Header + * TT_HoriHeader + * TT_VertHeader + * TT_OS2 + * TT_Postscript + * TT_PCLT + * TT_MaxProfile + * + * FT_Sfnt_Tag + * FT_Get_Sfnt_Table + * FT_Load_Sfnt_Table + * FT_Sfnt_Table_Info + * + * FT_Get_CMap_Language_ID + * FT_Get_CMap_Format + * + * FT_PARAM_TAG_UNPATENTED_HINTING + * + */ + + + /************************************************************************** + * + * @struct: + * TT_Header + * + * @description: + * A structure to model a TrueType font header table. All fields follow + * the OpenType specification. The 64-bit timestamps are stored in + * two-element arrays `Created` and `Modified`, first the upper then + * the lower 32~bits. + */ + typedef struct TT_Header_ + { + FT_Fixed Table_Version; + FT_Fixed Font_Revision; + + FT_Long CheckSum_Adjust; + FT_Long Magic_Number; + + FT_UShort Flags; + FT_UShort Units_Per_EM; + + FT_ULong Created [2]; + FT_ULong Modified[2]; + + FT_Short xMin; + FT_Short yMin; + FT_Short xMax; + FT_Short yMax; + + FT_UShort Mac_Style; + FT_UShort Lowest_Rec_PPEM; + + FT_Short Font_Direction; + FT_Short Index_To_Loc_Format; + FT_Short Glyph_Data_Format; + + } TT_Header; + + + /************************************************************************** + * + * @struct: + * TT_HoriHeader + * + * @description: + * A structure to model a TrueType horizontal header, the 'hhea' table, + * as well as the corresponding horizontal metrics table, 'hmtx'. + * + * @fields: + * Version :: + * The table version. + * + * Ascender :: + * The font's ascender, i.e., the distance from the baseline to the + * top-most of all glyph points found in the font. + * + * This value is invalid in many fonts, as it is usually set by the + * font designer, and often reflects only a portion of the glyphs found + * in the font (maybe ASCII). + * + * You should use the `sTypoAscender` field of the 'OS/2' table instead + * if you want the correct one. + * + * Descender :: + * The font's descender, i.e., the distance from the baseline to the + * bottom-most of all glyph points found in the font. It is negative. + * + * This value is invalid in many fonts, as it is usually set by the + * font designer, and often reflects only a portion of the glyphs found + * in the font (maybe ASCII). + * + * You should use the `sTypoDescender` field of the 'OS/2' table + * instead if you want the correct one. + * + * Line_Gap :: + * The font's line gap, i.e., the distance to add to the ascender and + * descender to get the BTB, i.e., the baseline-to-baseline distance + * for the font. + * + * advance_Width_Max :: + * This field is the maximum of all advance widths found in the font. + * It can be used to compute the maximum width of an arbitrary string + * of text. + * + * min_Left_Side_Bearing :: + * The minimum left side bearing of all glyphs within the font. + * + * min_Right_Side_Bearing :: + * The minimum right side bearing of all glyphs within the font. + * + * xMax_Extent :: + * The maximum horizontal extent (i.e., the 'width' of a glyph's + * bounding box) for all glyphs in the font. + * + * caret_Slope_Rise :: + * The rise coefficient of the cursor's slope of the cursor + * (slope=rise/run). + * + * caret_Slope_Run :: + * The run coefficient of the cursor's slope. + * + * caret_Offset :: + * The cursor's offset for slanted fonts. + * + * Reserved :: + * 8~reserved bytes. + * + * metric_Data_Format :: + * Always~0. + * + * number_Of_HMetrics :: + * Number of HMetrics entries in the 'hmtx' table -- this value can be + * smaller than the total number of glyphs in the font. + * + * long_metrics :: + * A pointer into the 'hmtx' table. + * + * short_metrics :: + * A pointer into the 'hmtx' table. + * + * @note: + * For an OpenType variation font, the values of the following fields can + * change after a call to @FT_Set_Var_Design_Coordinates (and friends) if + * the font contains an 'MVAR' table: `caret_Slope_Rise`, + * `caret_Slope_Run`, and `caret_Offset`. + */ + typedef struct TT_HoriHeader_ + { + FT_Fixed Version; + FT_Short Ascender; + FT_Short Descender; + FT_Short Line_Gap; + + FT_UShort advance_Width_Max; /* advance width maximum */ + + FT_Short min_Left_Side_Bearing; /* minimum left-sb */ + FT_Short min_Right_Side_Bearing; /* minimum right-sb */ + FT_Short xMax_Extent; /* xmax extents */ + FT_Short caret_Slope_Rise; + FT_Short caret_Slope_Run; + FT_Short caret_Offset; + + FT_Short Reserved[4]; + + FT_Short metric_Data_Format; + FT_UShort number_Of_HMetrics; + + /* The following fields are not defined by the OpenType specification */ + /* but they are used to connect the metrics header to the relevant */ + /* 'hmtx' table. */ + + void* long_metrics; + void* short_metrics; + + } TT_HoriHeader; + + + /************************************************************************** + * + * @struct: + * TT_VertHeader + * + * @description: + * A structure used to model a TrueType vertical header, the 'vhea' + * table, as well as the corresponding vertical metrics table, 'vmtx'. + * + * @fields: + * Version :: + * The table version. + * + * Ascender :: + * The font's ascender, i.e., the distance from the baseline to the + * top-most of all glyph points found in the font. + * + * This value is invalid in many fonts, as it is usually set by the + * font designer, and often reflects only a portion of the glyphs found + * in the font (maybe ASCII). + * + * You should use the `sTypoAscender` field of the 'OS/2' table instead + * if you want the correct one. + * + * Descender :: + * The font's descender, i.e., the distance from the baseline to the + * bottom-most of all glyph points found in the font. It is negative. + * + * This value is invalid in many fonts, as it is usually set by the + * font designer, and often reflects only a portion of the glyphs found + * in the font (maybe ASCII). + * + * You should use the `sTypoDescender` field of the 'OS/2' table + * instead if you want the correct one. + * + * Line_Gap :: + * The font's line gap, i.e., the distance to add to the ascender and + * descender to get the BTB, i.e., the baseline-to-baseline distance + * for the font. + * + * advance_Height_Max :: + * This field is the maximum of all advance heights found in the font. + * It can be used to compute the maximum height of an arbitrary string + * of text. + * + * min_Top_Side_Bearing :: + * The minimum top side bearing of all glyphs within the font. + * + * min_Bottom_Side_Bearing :: + * The minimum bottom side bearing of all glyphs within the font. + * + * yMax_Extent :: + * The maximum vertical extent (i.e., the 'height' of a glyph's + * bounding box) for all glyphs in the font. + * + * caret_Slope_Rise :: + * The rise coefficient of the cursor's slope of the cursor + * (slope=rise/run). + * + * caret_Slope_Run :: + * The run coefficient of the cursor's slope. + * + * caret_Offset :: + * The cursor's offset for slanted fonts. + * + * Reserved :: + * 8~reserved bytes. + * + * metric_Data_Format :: + * Always~0. + * + * number_Of_VMetrics :: + * Number of VMetrics entries in the 'vmtx' table -- this value can be + * smaller than the total number of glyphs in the font. + * + * long_metrics :: + * A pointer into the 'vmtx' table. + * + * short_metrics :: + * A pointer into the 'vmtx' table. + * + * @note: + * For an OpenType variation font, the values of the following fields can + * change after a call to @FT_Set_Var_Design_Coordinates (and friends) if + * the font contains an 'MVAR' table: `Ascender`, `Descender`, + * `Line_Gap`, `caret_Slope_Rise`, `caret_Slope_Run`, and `caret_Offset`. + */ + typedef struct TT_VertHeader_ + { + FT_Fixed Version; + FT_Short Ascender; + FT_Short Descender; + FT_Short Line_Gap; + + FT_UShort advance_Height_Max; /* advance height maximum */ + + FT_Short min_Top_Side_Bearing; /* minimum top-sb */ + FT_Short min_Bottom_Side_Bearing; /* minimum bottom-sb */ + FT_Short yMax_Extent; /* ymax extents */ + FT_Short caret_Slope_Rise; + FT_Short caret_Slope_Run; + FT_Short caret_Offset; + + FT_Short Reserved[4]; + + FT_Short metric_Data_Format; + FT_UShort number_Of_VMetrics; + + /* The following fields are not defined by the OpenType specification */ + /* but they are used to connect the metrics header to the relevant */ + /* 'vmtx' table. */ + + void* long_metrics; + void* short_metrics; + + } TT_VertHeader; + + + /************************************************************************** + * + * @struct: + * TT_OS2 + * + * @description: + * A structure to model a TrueType 'OS/2' table. All fields comply to + * the OpenType specification. + * + * Note that we now support old Mac fonts that do not include an 'OS/2' + * table. In this case, the `version` field is always set to 0xFFFF. + * + * @note: + * For an OpenType variation font, the values of the following fields can + * change after a call to @FT_Set_Var_Design_Coordinates (and friends) if + * the font contains an 'MVAR' table: `sCapHeight`, `sTypoAscender`, + * `sTypoDescender`, `sTypoLineGap`, `sxHeight`, `usWinAscent`, + * `usWinDescent`, `yStrikeoutPosition`, `yStrikeoutSize`, + * `ySubscriptXOffset`, `ySubScriptXSize`, `ySubscriptYOffset`, + * `ySubscriptYSize`, `ySuperscriptXOffset`, `ySuperscriptXSize`, + * `ySuperscriptYOffset`, and `ySuperscriptYSize`. + * + * Possible values for bits in the `ulUnicodeRangeX` fields are given by + * the @TT_UCR_XXX macros. + */ + + typedef struct TT_OS2_ + { + FT_UShort version; /* 0x0001 - more or 0xFFFF */ + FT_Short xAvgCharWidth; + FT_UShort usWeightClass; + FT_UShort usWidthClass; + FT_UShort fsType; + FT_Short ySubscriptXSize; + FT_Short ySubscriptYSize; + FT_Short ySubscriptXOffset; + FT_Short ySubscriptYOffset; + FT_Short ySuperscriptXSize; + FT_Short ySuperscriptYSize; + FT_Short ySuperscriptXOffset; + FT_Short ySuperscriptYOffset; + FT_Short yStrikeoutSize; + FT_Short yStrikeoutPosition; + FT_Short sFamilyClass; + + FT_Byte panose[10]; + + FT_ULong ulUnicodeRange1; /* Bits 0-31 */ + FT_ULong ulUnicodeRange2; /* Bits 32-63 */ + FT_ULong ulUnicodeRange3; /* Bits 64-95 */ + FT_ULong ulUnicodeRange4; /* Bits 96-127 */ + + FT_Char achVendID[4]; + + FT_UShort fsSelection; + FT_UShort usFirstCharIndex; + FT_UShort usLastCharIndex; + FT_Short sTypoAscender; + FT_Short sTypoDescender; + FT_Short sTypoLineGap; + FT_UShort usWinAscent; + FT_UShort usWinDescent; + + /* only version 1 and higher: */ + + FT_ULong ulCodePageRange1; /* Bits 0-31 */ + FT_ULong ulCodePageRange2; /* Bits 32-63 */ + + /* only version 2 and higher: */ + + FT_Short sxHeight; + FT_Short sCapHeight; + FT_UShort usDefaultChar; + FT_UShort usBreakChar; + FT_UShort usMaxContext; + + /* only version 5 and higher: */ + + FT_UShort usLowerOpticalPointSize; /* in twips (1/20 points) */ + FT_UShort usUpperOpticalPointSize; /* in twips (1/20 points) */ + + } TT_OS2; + + + /************************************************************************** + * + * @struct: + * TT_Postscript + * + * @description: + * A structure to model a TrueType 'post' table. All fields comply to + * the OpenType specification. This structure does not reference a + * font's PostScript glyph names; use @FT_Get_Glyph_Name to retrieve + * them. + * + * @note: + * For an OpenType variation font, the values of the following fields can + * change after a call to @FT_Set_Var_Design_Coordinates (and friends) if + * the font contains an 'MVAR' table: `underlinePosition` and + * `underlineThickness`. + */ + typedef struct TT_Postscript_ + { + FT_Fixed FormatType; + FT_Fixed italicAngle; + FT_Short underlinePosition; + FT_Short underlineThickness; + FT_ULong isFixedPitch; + FT_ULong minMemType42; + FT_ULong maxMemType42; + FT_ULong minMemType1; + FT_ULong maxMemType1; + + /* Glyph names follow in the 'post' table, but we don't */ + /* load them by default. */ + + } TT_Postscript; + + + /************************************************************************** + * + * @struct: + * TT_PCLT + * + * @description: + * A structure to model a TrueType 'PCLT' table. All fields comply to + * the OpenType specification. + */ + typedef struct TT_PCLT_ + { + FT_Fixed Version; + FT_ULong FontNumber; + FT_UShort Pitch; + FT_UShort xHeight; + FT_UShort Style; + FT_UShort TypeFamily; + FT_UShort CapHeight; + FT_UShort SymbolSet; + FT_Char TypeFace[16]; + FT_Char CharacterComplement[8]; + FT_Char FileName[6]; + FT_Char StrokeWeight; + FT_Char WidthType; + FT_Byte SerifStyle; + FT_Byte Reserved; + + } TT_PCLT; + + + /************************************************************************** + * + * @struct: + * TT_MaxProfile + * + * @description: + * The maximum profile ('maxp') table contains many max values, which can + * be used to pre-allocate arrays for speeding up glyph loading and + * hinting. + * + * @fields: + * version :: + * The version number. + * + * numGlyphs :: + * The number of glyphs in this TrueType font. + * + * maxPoints :: + * The maximum number of points in a non-composite TrueType glyph. See + * also `maxCompositePoints`. + * + * maxContours :: + * The maximum number of contours in a non-composite TrueType glyph. + * See also `maxCompositeContours`. + * + * maxCompositePoints :: + * The maximum number of points in a composite TrueType glyph. See + * also `maxPoints`. + * + * maxCompositeContours :: + * The maximum number of contours in a composite TrueType glyph. See + * also `maxContours`. + * + * maxZones :: + * The maximum number of zones used for glyph hinting. + * + * maxTwilightPoints :: + * The maximum number of points in the twilight zone used for glyph + * hinting. + * + * maxStorage :: + * The maximum number of elements in the storage area used for glyph + * hinting. + * + * maxFunctionDefs :: + * The maximum number of function definitions in the TrueType bytecode + * for this font. + * + * maxInstructionDefs :: + * The maximum number of instruction definitions in the TrueType + * bytecode for this font. + * + * maxStackElements :: + * The maximum number of stack elements used during bytecode + * interpretation. + * + * maxSizeOfInstructions :: + * The maximum number of TrueType opcodes used for glyph hinting. + * + * maxComponentElements :: + * The maximum number of simple (i.e., non-composite) glyphs in a + * composite glyph. + * + * maxComponentDepth :: + * The maximum nesting depth of composite glyphs. + * + * @note: + * This structure is only used during font loading. + */ + typedef struct TT_MaxProfile_ + { + FT_Fixed version; + FT_UShort numGlyphs; + FT_UShort maxPoints; + FT_UShort maxContours; + FT_UShort maxCompositePoints; + FT_UShort maxCompositeContours; + FT_UShort maxZones; + FT_UShort maxTwilightPoints; + FT_UShort maxStorage; + FT_UShort maxFunctionDefs; + FT_UShort maxInstructionDefs; + FT_UShort maxStackElements; + FT_UShort maxSizeOfInstructions; + FT_UShort maxComponentElements; + FT_UShort maxComponentDepth; + + } TT_MaxProfile; + + + /************************************************************************** + * + * @enum: + * FT_Sfnt_Tag + * + * @description: + * An enumeration to specify indices of SFNT tables loaded and parsed by + * FreeType during initialization of an SFNT font. Used in the + * @FT_Get_Sfnt_Table API function. + * + * @values: + * FT_SFNT_HEAD :: + * To access the font's @TT_Header structure. + * + * FT_SFNT_MAXP :: + * To access the font's @TT_MaxProfile structure. + * + * FT_SFNT_OS2 :: + * To access the font's @TT_OS2 structure. + * + * FT_SFNT_HHEA :: + * To access the font's @TT_HoriHeader structure. + * + * FT_SFNT_VHEA :: + * To access the font's @TT_VertHeader structure. + * + * FT_SFNT_POST :: + * To access the font's @TT_Postscript structure. + * + * FT_SFNT_PCLT :: + * To access the font's @TT_PCLT structure. + */ + typedef enum FT_Sfnt_Tag_ + { + FT_SFNT_HEAD, + FT_SFNT_MAXP, + FT_SFNT_OS2, + FT_SFNT_HHEA, + FT_SFNT_VHEA, + FT_SFNT_POST, + FT_SFNT_PCLT, + + FT_SFNT_MAX + + } FT_Sfnt_Tag; + + /* these constants are deprecated; use the corresponding `FT_Sfnt_Tag` */ + /* values instead */ +#define ft_sfnt_head FT_SFNT_HEAD +#define ft_sfnt_maxp FT_SFNT_MAXP +#define ft_sfnt_os2 FT_SFNT_OS2 +#define ft_sfnt_hhea FT_SFNT_HHEA +#define ft_sfnt_vhea FT_SFNT_VHEA +#define ft_sfnt_post FT_SFNT_POST +#define ft_sfnt_pclt FT_SFNT_PCLT + + + /************************************************************************** + * + * @function: + * FT_Get_Sfnt_Table + * + * @description: + * Return a pointer to a given SFNT table stored within a face. + * + * @input: + * face :: + * A handle to the source. + * + * tag :: + * The index of the SFNT table. + * + * @return: + * A type-less pointer to the table. This will be `NULL` in case of + * error, or if the corresponding table was not found **OR** loaded from + * the file. + * + * Use a typecast according to `tag` to access the structure elements. + * + * @note: + * The table is owned by the face object and disappears with it. + * + * This function is only useful to access SFNT tables that are loaded by + * the sfnt, truetype, and opentype drivers. See @FT_Sfnt_Tag for a + * list. + * + * @example: + * Here is an example demonstrating access to the 'vhea' table. + * + * ``` + * TT_VertHeader* vert_header; + * + * + * vert_header = + * (TT_VertHeader*)FT_Get_Sfnt_Table( face, FT_SFNT_VHEA ); + * ``` + */ + FT_EXPORT( void* ) + FT_Get_Sfnt_Table( FT_Face face, + FT_Sfnt_Tag tag ); + + + /************************************************************************** + * + * @function: + * FT_Load_Sfnt_Table + * + * @description: + * Load any SFNT font table into client memory. + * + * @input: + * face :: + * A handle to the source face. + * + * tag :: + * The four-byte tag of the table to load. Use value~0 if you want to + * access the whole font file. Otherwise, you can use one of the + * definitions found in the @FT_TRUETYPE_TAGS_H file, or forge a new + * one with @FT_MAKE_TAG. + * + * [Since 2.14] Use value~1 if you want to access the table directory + * of the (currently selected) font. + * + * offset :: + * The starting offset in the table (or file if tag~==~0). + * + * @output: + * buffer :: + * The target buffer address. The client must ensure that the memory + * array is big enough to hold the data. + * + * @inout: + * length :: + * If the `length` parameter is `NULL`, try to load the whole table. + * Return an error code if it fails. + * + * Else, if `*length` is~0, exit immediately while returning the + * table's (or file) full size in it. + * + * Else the number of bytes to read from the table or file, from the + * starting offset. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * If you need to determine the table's length you should first call this + * function with `*length` set to~0, as in the following example: + * + * ``` + * FT_ULong length = 0; + * + * + * error = FT_Load_Sfnt_Table( face, tag, 0, NULL, &length ); + * if ( error ) { ... table does not exist ... } + * + * buffer = malloc( length ); + * if ( buffer == NULL ) { ... not enough memory ... } + * + * error = FT_Load_Sfnt_Table( face, tag, 0, buffer, &length ); + * if ( error ) { ... could not load table ... } + * ``` + * + * Note that structures like @TT_Header or @TT_OS2 can't be used with + * this function; they are limited to @FT_Get_Sfnt_Table. Reason is that + * those structures depend on the processor architecture, with varying + * size (e.g. 32bit vs. 64bit) or order (big endian vs. little endian). + * + */ + FT_EXPORT( FT_Error ) + FT_Load_Sfnt_Table( FT_Face face, + FT_ULong tag, + FT_Long offset, + FT_Byte* buffer, + FT_ULong* length ); + + + /************************************************************************** + * + * @function: + * FT_Sfnt_Table_Info + * + * @description: + * Return information on an SFNT table. + * + * @input: + * face :: + * A handle to the source face. + * + * table_index :: + * The index of an SFNT table. The function returns + * FT_Err_Table_Missing for an invalid value. + * + * @inout: + * tag :: + * The name tag of the SFNT table. If the value is `NULL`, + * `table_index` is ignored, and `length` returns the number of SFNT + * tables in the font. + * + * @output: + * length :: + * The length of the SFNT table (or the number of SFNT tables, + * depending on `tag`). + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * While parsing fonts, FreeType handles SFNT tables with length zero as + * missing. + * + */ + FT_EXPORT( FT_Error ) + FT_Sfnt_Table_Info( FT_Face face, + FT_UInt table_index, + FT_ULong *tag, + FT_ULong *length ); + + + /************************************************************************** + * + * @function: + * FT_Get_CMap_Language_ID + * + * @description: + * Return cmap language ID as specified in the OpenType standard. + * Definitions of language ID values are in file @FT_TRUETYPE_IDS_H. + * + * @input: + * charmap :: + * The target charmap. + * + * @return: + * The language ID of `charmap`. If `charmap` doesn't belong to an SFNT + * face, just return~0 as the default value. + * + * For a format~14 cmap (to access Unicode IVS), the return value is + * 0xFFFFFFFF. + */ + FT_EXPORT( FT_ULong ) + FT_Get_CMap_Language_ID( FT_CharMap charmap ); + + + /************************************************************************** + * + * @function: + * FT_Get_CMap_Format + * + * @description: + * Return the format of an SFNT 'cmap' table. + * + * @input: + * charmap :: + * The target charmap. + * + * @return: + * The format of `charmap`. If `charmap` doesn't belong to an SFNT face + * (including the synthetic Unicode charmap sometimes created by + * FreeType), return -1. + */ + FT_EXPORT( FT_Long ) + FT_Get_CMap_Format( FT_CharMap charmap ); + + /* */ + + +FT_END_HEADER + +#endif /* TTTABLES_H_ */ + + +/* END */ diff --git a/dependencies/linux64/include/freetype2/freetype/tttags.h b/dependencies/linux64/include/freetype2/freetype/tttags.h new file mode 100644 index 0000000..da0af5d --- /dev/null +++ b/dependencies/linux64/include/freetype2/freetype/tttags.h @@ -0,0 +1,124 @@ +/**************************************************************************** + * + * tttags.h + * + * Tags for TrueType and OpenType tables (specification only). + * + * Copyright (C) 1996-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + +#ifndef TTAGS_H_ +#define TTAGS_H_ + + +#include + +#ifdef FREETYPE_H +#error "freetype.h of FreeType 1 has been loaded!" +#error "Please fix the directory search order for header files" +#error "so that freetype.h of FreeType 2 is found first." +#endif + + +FT_BEGIN_HEADER + + +#define TTAG_avar FT_MAKE_TAG( 'a', 'v', 'a', 'r' ) +#define TTAG_BASE FT_MAKE_TAG( 'B', 'A', 'S', 'E' ) +#define TTAG_bdat FT_MAKE_TAG( 'b', 'd', 'a', 't' ) +#define TTAG_BDF FT_MAKE_TAG( 'B', 'D', 'F', ' ' ) +#define TTAG_bhed FT_MAKE_TAG( 'b', 'h', 'e', 'd' ) +#define TTAG_bloc FT_MAKE_TAG( 'b', 'l', 'o', 'c' ) +#define TTAG_bsln FT_MAKE_TAG( 'b', 's', 'l', 'n' ) +#define TTAG_CBDT FT_MAKE_TAG( 'C', 'B', 'D', 'T' ) +#define TTAG_CBLC FT_MAKE_TAG( 'C', 'B', 'L', 'C' ) +#define TTAG_CFF FT_MAKE_TAG( 'C', 'F', 'F', ' ' ) +#define TTAG_CFF2 FT_MAKE_TAG( 'C', 'F', 'F', '2' ) +#define TTAG_CID FT_MAKE_TAG( 'C', 'I', 'D', ' ' ) +#define TTAG_cmap FT_MAKE_TAG( 'c', 'm', 'a', 'p' ) +#define TTAG_COLR FT_MAKE_TAG( 'C', 'O', 'L', 'R' ) +#define TTAG_CPAL FT_MAKE_TAG( 'C', 'P', 'A', 'L' ) +#define TTAG_cvar FT_MAKE_TAG( 'c', 'v', 'a', 'r' ) +#define TTAG_cvt FT_MAKE_TAG( 'c', 'v', 't', ' ' ) +#define TTAG_DSIG FT_MAKE_TAG( 'D', 'S', 'I', 'G' ) +#define TTAG_EBDT FT_MAKE_TAG( 'E', 'B', 'D', 'T' ) +#define TTAG_EBLC FT_MAKE_TAG( 'E', 'B', 'L', 'C' ) +#define TTAG_EBSC FT_MAKE_TAG( 'E', 'B', 'S', 'C' ) +#define TTAG_feat FT_MAKE_TAG( 'f', 'e', 'a', 't' ) +#define TTAG_FOND FT_MAKE_TAG( 'F', 'O', 'N', 'D' ) +#define TTAG_fpgm FT_MAKE_TAG( 'f', 'p', 'g', 'm' ) +#define TTAG_fvar FT_MAKE_TAG( 'f', 'v', 'a', 'r' ) +#define TTAG_gasp FT_MAKE_TAG( 'g', 'a', 's', 'p' ) +#define TTAG_GDEF FT_MAKE_TAG( 'G', 'D', 'E', 'F' ) +#define TTAG_glyf FT_MAKE_TAG( 'g', 'l', 'y', 'f' ) +#define TTAG_GPOS FT_MAKE_TAG( 'G', 'P', 'O', 'S' ) +#define TTAG_GSUB FT_MAKE_TAG( 'G', 'S', 'U', 'B' ) +#define TTAG_gvar FT_MAKE_TAG( 'g', 'v', 'a', 'r' ) +#define TTAG_HVAR FT_MAKE_TAG( 'H', 'V', 'A', 'R' ) +#define TTAG_hdmx FT_MAKE_TAG( 'h', 'd', 'm', 'x' ) +#define TTAG_head FT_MAKE_TAG( 'h', 'e', 'a', 'd' ) +#define TTAG_hhea FT_MAKE_TAG( 'h', 'h', 'e', 'a' ) +#define TTAG_hmtx FT_MAKE_TAG( 'h', 'm', 't', 'x' ) +#define TTAG_JSTF FT_MAKE_TAG( 'J', 'S', 'T', 'F' ) +#define TTAG_just FT_MAKE_TAG( 'j', 'u', 's', 't' ) +#define TTAG_kern FT_MAKE_TAG( 'k', 'e', 'r', 'n' ) +#define TTAG_lcar FT_MAKE_TAG( 'l', 'c', 'a', 'r' ) +#define TTAG_loca FT_MAKE_TAG( 'l', 'o', 'c', 'a' ) +#define TTAG_LTSH FT_MAKE_TAG( 'L', 'T', 'S', 'H' ) +#define TTAG_LWFN FT_MAKE_TAG( 'L', 'W', 'F', 'N' ) +#define TTAG_MATH FT_MAKE_TAG( 'M', 'A', 'T', 'H' ) +#define TTAG_maxp FT_MAKE_TAG( 'm', 'a', 'x', 'p' ) +#define TTAG_META FT_MAKE_TAG( 'M', 'E', 'T', 'A' ) +#define TTAG_MMFX FT_MAKE_TAG( 'M', 'M', 'F', 'X' ) +#define TTAG_MMSD FT_MAKE_TAG( 'M', 'M', 'S', 'D' ) +#define TTAG_mort FT_MAKE_TAG( 'm', 'o', 'r', 't' ) +#define TTAG_morx FT_MAKE_TAG( 'm', 'o', 'r', 'x' ) +#define TTAG_MVAR FT_MAKE_TAG( 'M', 'V', 'A', 'R' ) +#define TTAG_name FT_MAKE_TAG( 'n', 'a', 'm', 'e' ) +#define TTAG_opbd FT_MAKE_TAG( 'o', 'p', 'b', 'd' ) +#define TTAG_OS2 FT_MAKE_TAG( 'O', 'S', '/', '2' ) +#define TTAG_OTTO FT_MAKE_TAG( 'O', 'T', 'T', 'O' ) +#define TTAG_PCLT FT_MAKE_TAG( 'P', 'C', 'L', 'T' ) +#define TTAG_POST FT_MAKE_TAG( 'P', 'O', 'S', 'T' ) +#define TTAG_post FT_MAKE_TAG( 'p', 'o', 's', 't' ) +#define TTAG_prep FT_MAKE_TAG( 'p', 'r', 'e', 'p' ) +#define TTAG_prop FT_MAKE_TAG( 'p', 'r', 'o', 'p' ) +#define TTAG_sbix FT_MAKE_TAG( 's', 'b', 'i', 'x' ) +#define TTAG_sfnt FT_MAKE_TAG( 's', 'f', 'n', 't' ) +#define TTAG_SING FT_MAKE_TAG( 'S', 'I', 'N', 'G' ) +#define TTAG_SVG FT_MAKE_TAG( 'S', 'V', 'G', ' ' ) +#define TTAG_trak FT_MAKE_TAG( 't', 'r', 'a', 'k' ) +#define TTAG_true FT_MAKE_TAG( 't', 'r', 'u', 'e' ) +#define TTAG_ttc FT_MAKE_TAG( 't', 't', 'c', ' ' ) +#define TTAG_ttcf FT_MAKE_TAG( 't', 't', 'c', 'f' ) +#define TTAG_TYP1 FT_MAKE_TAG( 'T', 'Y', 'P', '1' ) +#define TTAG_typ1 FT_MAKE_TAG( 't', 'y', 'p', '1' ) +#define TTAG_VDMX FT_MAKE_TAG( 'V', 'D', 'M', 'X' ) +#define TTAG_vhea FT_MAKE_TAG( 'v', 'h', 'e', 'a' ) +#define TTAG_vmtx FT_MAKE_TAG( 'v', 'm', 't', 'x' ) +#define TTAG_VVAR FT_MAKE_TAG( 'V', 'V', 'A', 'R' ) +#define TTAG_wOFF FT_MAKE_TAG( 'w', 'O', 'F', 'F' ) +#define TTAG_wOF2 FT_MAKE_TAG( 'w', 'O', 'F', '2' ) + +/* used by "Keyboard.dfont" on legacy Mac OS X */ +#define TTAG_0xA5kbd FT_MAKE_TAG( 0xA5, 'k', 'b', 'd' ) + +/* used by "LastResort.dfont" on legacy Mac OS X */ +#define TTAG_0xA5lst FT_MAKE_TAG( 0xA5, 'l', 's', 't' ) + + +FT_END_HEADER + +#endif /* TTAGS_H_ */ + + +/* END */ diff --git a/dependencies/linux64/include/freetype2/ft2build.h b/dependencies/linux64/include/freetype2/ft2build.h new file mode 100644 index 0000000..d3d7685 --- /dev/null +++ b/dependencies/linux64/include/freetype2/ft2build.h @@ -0,0 +1,42 @@ +/**************************************************************************** + * + * ft2build.h + * + * FreeType 2 build and setup macros. + * + * Copyright (C) 1996-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + + /************************************************************************** + * + * This is the 'entry point' for FreeType header file inclusions, to be + * loaded before all other header files. + * + * A typical example is + * + * ``` + * #include + * #include + * ``` + * + */ + + +#ifndef FT2BUILD_H_ +#define FT2BUILD_H_ + +#include + +#endif /* FT2BUILD_H_ */ + + +/* END */ diff --git a/dependencies/linux64/include/harfbuzz/hb-aat-layout.h b/dependencies/linux64/include/harfbuzz/hb-aat-layout.h new file mode 100644 index 0000000..c682a2f --- /dev/null +++ b/dependencies/linux64/include/harfbuzz/hb-aat-layout.h @@ -0,0 +1,795 @@ +/* + * Copyright © 2018 Ebrahim Byagowi + * + * This is part of HarfBuzz, a text shaping library. + * + * Permission is hereby granted, without written agreement and without + * license or royalty fees, to use, copy, modify, and distribute this + * software and its documentation for any purpose, provided that the + * above copyright notice and the following two paragraphs appear in + * all copies of this software. + * + * IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE TO ANY PARTY FOR + * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES + * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN + * IF THE COPYRIGHT HOLDER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + * THE COPYRIGHT HOLDER SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, + * BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND + * FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS + * ON AN "AS IS" BASIS, AND THE COPYRIGHT HOLDER HAS NO OBLIGATION TO + * PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. + */ + +#if !defined(HB_AAT_H_IN) && !defined(HB_NO_SINGLE_HEADER_ERROR) +#error "Include instead." +#endif + +#ifndef HB_AAT_LAYOUT_H +#define HB_AAT_LAYOUT_H + +#include "hb.h" + +#include "hb-ot.h" + +HB_BEGIN_DECLS + +/** + * hb_aat_layout_feature_type_t: + * @HB_AAT_LAYOUT_FEATURE_TYPE_INVALID: Initial, unset feature type + * @HB_AAT_LAYOUT_FEATURE_TYPE_ALL_TYPOGRAPHIC: [All Typographic Features](https://developer.apple.com/fonts/TrueType-Reference-Manual/RM09/AppendixF.html#Type0) + * @HB_AAT_LAYOUT_FEATURE_TYPE_LIGATURES: [Ligatures](https://developer.apple.com/fonts/TrueType-Reference-Manual/RM09/AppendixF.html#Type1) + * @HB_AAT_LAYOUT_FEATURE_TYPE_CURSIVE_CONNECTION: [Cursive Connection](https://developer.apple.com/fonts/TrueType-Reference-Manual/RM09/AppendixF.html#Type2) + * @HB_AAT_LAYOUT_FEATURE_TYPE_LETTER_CASE: [Letter Case](https://developer.apple.com/fonts/TrueType-Reference-Manual/RM09/AppendixF.html#Type3) + * @HB_AAT_LAYOUT_FEATURE_TYPE_VERTICAL_SUBSTITUTION: [Vertical Substitution](https://developer.apple.com/fonts/TrueType-Reference-Manual/RM09/AppendixF.html#Type4) + * @HB_AAT_LAYOUT_FEATURE_TYPE_LINGUISTIC_REARRANGEMENT: [Linguistic Rearrangement](https://developer.apple.com/fonts/TrueType-Reference-Manual/RM09/AppendixF.html#Type5) + * @HB_AAT_LAYOUT_FEATURE_TYPE_NUMBER_SPACING: [Number Spacing](https://developer.apple.com/fonts/TrueType-Reference-Manual/RM09/AppendixF.html#Type6) + * @HB_AAT_LAYOUT_FEATURE_TYPE_SMART_SWASH_TYPE: [Smart Swash](https://developer.apple.com/fonts/TrueType-Reference-Manual/RM09/AppendixF.html#Type8) + * @HB_AAT_LAYOUT_FEATURE_TYPE_DIACRITICS_TYPE: [Diacritics](https://developer.apple.com/fonts/TrueType-Reference-Manual/RM09/AppendixF.html#Type9) + * @HB_AAT_LAYOUT_FEATURE_TYPE_VERTICAL_POSITION: [Vertical Position](https://developer.apple.com/fonts/TrueType-Reference-Manual/RM09/AppendixF.html#Type10) + * @HB_AAT_LAYOUT_FEATURE_TYPE_FRACTIONS: [Fractions](https://developer.apple.com/fonts/TrueType-Reference-Manual/RM09/AppendixF.html#Type11) + * @HB_AAT_LAYOUT_FEATURE_TYPE_OVERLAPPING_CHARACTERS_TYPE: [Overlapping Characters](https://developer.apple.com/fonts/TrueType-Reference-Manual/RM09/AppendixF.html#Type13) + * @HB_AAT_LAYOUT_FEATURE_TYPE_TYPOGRAPHIC_EXTRAS: [Typographic Extras](https://developer.apple.com/fonts/TrueType-Reference-Manual/RM09/AppendixF.html#Type14) + * @HB_AAT_LAYOUT_FEATURE_TYPE_MATHEMATICAL_EXTRAS: [Mathematical Extras](https://developer.apple.com/fonts/TrueType-Reference-Manual/RM09/AppendixF.html#Type15) + * @HB_AAT_LAYOUT_FEATURE_TYPE_ORNAMENT_SETS_TYPE: [Ornament Sets](https://developer.apple.com/fonts/TrueType-Reference-Manual/RM09/AppendixF.html#Type16) + * @HB_AAT_LAYOUT_FEATURE_TYPE_CHARACTER_ALTERNATIVES: [Character Alternatives](https://developer.apple.com/fonts/TrueType-Reference-Manual/RM09/AppendixF.html#Type17) + * @HB_AAT_LAYOUT_FEATURE_TYPE_DESIGN_COMPLEXITY_TYPE: [Design Complexity](https://developer.apple.com/fonts/TrueType-Reference-Manual/RM09/AppendixF.html#Type18) + * @HB_AAT_LAYOUT_FEATURE_TYPE_STYLE_OPTIONS: [Style Options](https://developer.apple.com/fonts/TrueType-Reference-Manual/RM09/AppendixF.html#Type19) + * @HB_AAT_LAYOUT_FEATURE_TYPE_CHARACTER_SHAPE: [Character Shape](https://developer.apple.com/fonts/TrueType-Reference-Manual/RM09/AppendixF.html#Type20) + * @HB_AAT_LAYOUT_FEATURE_TYPE_NUMBER_CASE: [Number Case](https://developer.apple.com/fonts/TrueType-Reference-Manual/RM09/AppendixF.html#Type21) + * @HB_AAT_LAYOUT_FEATURE_TYPE_TEXT_SPACING: [Text Spacing](https://developer.apple.com/fonts/TrueType-Reference-Manual/RM09/AppendixF.html#Type22) + * @HB_AAT_LAYOUT_FEATURE_TYPE_TRANSLITERATION: [Transliteration](https://developer.apple.com/fonts/TrueType-Reference-Manual/RM09/AppendixF.html#Type23) + * @HB_AAT_LAYOUT_FEATURE_TYPE_ANNOTATION_TYPE: [Annotation](https://developer.apple.com/fonts/TrueType-Reference-Manual/RM09/AppendixF.html#Type24) + * @HB_AAT_LAYOUT_FEATURE_TYPE_KANA_SPACING_TYPE: [Kana Spacing](https://developer.apple.com/fonts/TrueType-Reference-Manual/RM09/AppendixF.html#Type25) + * @HB_AAT_LAYOUT_FEATURE_TYPE_IDEOGRAPHIC_SPACING_TYPE: [Ideographic Spacing](https://developer.apple.com/fonts/TrueType-Reference-Manual/RM09/AppendixF.html#Type26) + * @HB_AAT_LAYOUT_FEATURE_TYPE_UNICODE_DECOMPOSITION_TYPE: [Unicode Decomposition](https://developer.apple.com/fonts/TrueType-Reference-Manual/RM09/AppendixF.html#Type27) + * @HB_AAT_LAYOUT_FEATURE_TYPE_RUBY_KANA: [Ruby Kana](https://developer.apple.com/fonts/TrueType-Reference-Manual/RM09/AppendixF.html#Type28) + * @HB_AAT_LAYOUT_FEATURE_TYPE_CJK_SYMBOL_ALTERNATIVES_TYPE: [CJK Symbol Alternatives](https://developer.apple.com/fonts/TrueType-Reference-Manual/RM09/AppendixF.html#Type29) + * @HB_AAT_LAYOUT_FEATURE_TYPE_IDEOGRAPHIC_ALTERNATIVES_TYPE: [Ideographic Alternatives](https://developer.apple.com/fonts/TrueType-Reference-Manual/RM09/AppendixF.html#Type30) + * @HB_AAT_LAYOUT_FEATURE_TYPE_CJK_VERTICAL_ROMAN_PLACEMENT_TYPE: [CJK Vertical Roman Placement](https://developer.apple.com/fonts/TrueType-Reference-Manual/RM09/AppendixF.html#Type31) + * @HB_AAT_LAYOUT_FEATURE_TYPE_ITALIC_CJK_ROMAN: [Italic CJK Roman](https://developer.apple.com/fonts/TrueType-Reference-Manual/RM09/AppendixF.html#Type32) + * @HB_AAT_LAYOUT_FEATURE_TYPE_CASE_SENSITIVE_LAYOUT: [Case Sensitive Layout](https://developer.apple.com/fonts/TrueType-Reference-Manual/RM09/AppendixF.html#Type33) + * @HB_AAT_LAYOUT_FEATURE_TYPE_ALTERNATE_KANA: [Alternate Kana](https://developer.apple.com/fonts/TrueType-Reference-Manual/RM09/AppendixF.html#Type34) + * @HB_AAT_LAYOUT_FEATURE_TYPE_STYLISTIC_ALTERNATIVES: [Stylistic Alternatives](https://developer.apple.com/fonts/TrueType-Reference-Manual/RM09/AppendixF.html#Type35) + * @HB_AAT_LAYOUT_FEATURE_TYPE_CONTEXTUAL_ALTERNATIVES: [Contextual Alternatives](https://developer.apple.com/fonts/TrueType-Reference-Manual/RM09/AppendixF.html#Type36) + * @HB_AAT_LAYOUT_FEATURE_TYPE_LOWER_CASE: [Lower Case](https://developer.apple.com/fonts/TrueType-Reference-Manual/RM09/AppendixF.html#Type37) + * @HB_AAT_LAYOUT_FEATURE_TYPE_UPPER_CASE: [Upper Case](https://developer.apple.com/fonts/TrueType-Reference-Manual/RM09/AppendixF.html#Type38) + * @HB_AAT_LAYOUT_FEATURE_TYPE_LANGUAGE_TAG_TYPE: [Language Tag](https://developer.apple.com/fonts/TrueType-Reference-Manual/RM09/AppendixF.html#Type39) + * @HB_AAT_LAYOUT_FEATURE_TYPE_CJK_ROMAN_SPACING_TYPE: [CJK Roman Spacing](https://developer.apple.com/fonts/TrueType-Reference-Manual/RM09/AppendixF.html#Type103) + * + * The possible feature types defined for AAT shaping, from Apple [Font Feature Registry](https://developer.apple.com/fonts/TrueType-Reference-Manual/RM09/AppendixF.html). + * + * Since: 2.2.0 + */ +typedef enum +{ + HB_AAT_LAYOUT_FEATURE_TYPE_INVALID = 0xFFFF, + + HB_AAT_LAYOUT_FEATURE_TYPE_ALL_TYPOGRAPHIC = 0, + HB_AAT_LAYOUT_FEATURE_TYPE_LIGATURES = 1, + HB_AAT_LAYOUT_FEATURE_TYPE_CURSIVE_CONNECTION = 2, + HB_AAT_LAYOUT_FEATURE_TYPE_LETTER_CASE = 3, + HB_AAT_LAYOUT_FEATURE_TYPE_VERTICAL_SUBSTITUTION = 4, + HB_AAT_LAYOUT_FEATURE_TYPE_LINGUISTIC_REARRANGEMENT = 5, + HB_AAT_LAYOUT_FEATURE_TYPE_NUMBER_SPACING = 6, + HB_AAT_LAYOUT_FEATURE_TYPE_SMART_SWASH_TYPE = 8, + HB_AAT_LAYOUT_FEATURE_TYPE_DIACRITICS_TYPE = 9, + HB_AAT_LAYOUT_FEATURE_TYPE_VERTICAL_POSITION = 10, + HB_AAT_LAYOUT_FEATURE_TYPE_FRACTIONS = 11, + HB_AAT_LAYOUT_FEATURE_TYPE_OVERLAPPING_CHARACTERS_TYPE = 13, + HB_AAT_LAYOUT_FEATURE_TYPE_TYPOGRAPHIC_EXTRAS = 14, + HB_AAT_LAYOUT_FEATURE_TYPE_MATHEMATICAL_EXTRAS = 15, + HB_AAT_LAYOUT_FEATURE_TYPE_ORNAMENT_SETS_TYPE = 16, + HB_AAT_LAYOUT_FEATURE_TYPE_CHARACTER_ALTERNATIVES = 17, + HB_AAT_LAYOUT_FEATURE_TYPE_DESIGN_COMPLEXITY_TYPE = 18, + HB_AAT_LAYOUT_FEATURE_TYPE_STYLE_OPTIONS = 19, + HB_AAT_LAYOUT_FEATURE_TYPE_CHARACTER_SHAPE = 20, + HB_AAT_LAYOUT_FEATURE_TYPE_NUMBER_CASE = 21, + HB_AAT_LAYOUT_FEATURE_TYPE_TEXT_SPACING = 22, + HB_AAT_LAYOUT_FEATURE_TYPE_TRANSLITERATION = 23, + HB_AAT_LAYOUT_FEATURE_TYPE_ANNOTATION_TYPE = 24, + HB_AAT_LAYOUT_FEATURE_TYPE_KANA_SPACING_TYPE = 25, + HB_AAT_LAYOUT_FEATURE_TYPE_IDEOGRAPHIC_SPACING_TYPE = 26, + HB_AAT_LAYOUT_FEATURE_TYPE_UNICODE_DECOMPOSITION_TYPE = 27, + HB_AAT_LAYOUT_FEATURE_TYPE_RUBY_KANA = 28, + HB_AAT_LAYOUT_FEATURE_TYPE_CJK_SYMBOL_ALTERNATIVES_TYPE = 29, + HB_AAT_LAYOUT_FEATURE_TYPE_IDEOGRAPHIC_ALTERNATIVES_TYPE = 30, + HB_AAT_LAYOUT_FEATURE_TYPE_CJK_VERTICAL_ROMAN_PLACEMENT_TYPE = 31, + HB_AAT_LAYOUT_FEATURE_TYPE_ITALIC_CJK_ROMAN = 32, + HB_AAT_LAYOUT_FEATURE_TYPE_CASE_SENSITIVE_LAYOUT = 33, + HB_AAT_LAYOUT_FEATURE_TYPE_ALTERNATE_KANA = 34, + HB_AAT_LAYOUT_FEATURE_TYPE_STYLISTIC_ALTERNATIVES = 35, + HB_AAT_LAYOUT_FEATURE_TYPE_CONTEXTUAL_ALTERNATIVES = 36, + HB_AAT_LAYOUT_FEATURE_TYPE_LOWER_CASE = 37, + HB_AAT_LAYOUT_FEATURE_TYPE_UPPER_CASE = 38, + HB_AAT_LAYOUT_FEATURE_TYPE_LANGUAGE_TAG_TYPE = 39, + HB_AAT_LAYOUT_FEATURE_TYPE_CJK_ROMAN_SPACING_TYPE = 103, + + /*< private >*/ + _HB_AAT_LAYOUT_FEATURE_TYPE_MAX_VALUE = HB_TAG_MAX_SIGNED /*< skip >*/ +} hb_aat_layout_feature_type_t; + +/** + * hb_aat_layout_feature_selector_t: + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_INVALID: Initial, unset feature selector + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_ALL_TYPE_FEATURES_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_ALL_TYPOGRAPHIC + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_ALL_TYPE_FEATURES_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_ALL_TYPOGRAPHIC + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_REQUIRED_LIGATURES_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_LIGATURES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_REQUIRED_LIGATURES_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_LIGATURES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_COMMON_LIGATURES_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_LIGATURES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_COMMON_LIGATURES_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_LIGATURES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_RARE_LIGATURES_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_LIGATURES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_RARE_LIGATURES_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_LIGATURES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_LOGOS_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_LIGATURES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_LOGOS_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_LIGATURES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_REBUS_PICTURES_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_LIGATURES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_REBUS_PICTURES_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_LIGATURES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_DIPHTHONG_LIGATURES_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_LIGATURES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_DIPHTHONG_LIGATURES_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_LIGATURES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_SQUARED_LIGATURES_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_LIGATURES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_SQUARED_LIGATURES_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_LIGATURES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_ABBREV_SQUARED_LIGATURES_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_LIGATURES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_ABBREV_SQUARED_LIGATURES_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_LIGATURES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_SYMBOL_LIGATURES_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_LIGATURES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_SYMBOL_LIGATURES_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_LIGATURES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_CONTEXTUAL_LIGATURES_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_LIGATURES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_CONTEXTUAL_LIGATURES_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_LIGATURES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_HISTORICAL_LIGATURES_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_LIGATURES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_HISTORICAL_LIGATURES_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_LIGATURES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_UNCONNECTED: for #HB_AAT_LAYOUT_FEATURE_TYPE_LIGATURES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_PARTIALLY_CONNECTED: for #HB_AAT_LAYOUT_FEATURE_TYPE_LIGATURES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_CURSIVE: for #HB_AAT_LAYOUT_FEATURE_TYPE_LIGATURES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_UPPER_AND_LOWER_CASE: Deprecated + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_ALL_CAPS: Deprecated + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_ALL_LOWER_CASE: Deprecated + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_SMALL_CAPS: Deprecated + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_INITIAL_CAPS: Deprecated + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_INITIAL_CAPS_AND_SMALL_CAPS: Deprecated + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_SUBSTITUTE_VERTICAL_FORMS_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_VERTICAL_SUBSTITUTION + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_SUBSTITUTE_VERTICAL_FORMS_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_VERTICAL_SUBSTITUTION + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_LINGUISTIC_REARRANGEMENT_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_LINGUISTIC_REARRANGEMENT + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_LINGUISTIC_REARRANGEMENT_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_LINGUISTIC_REARRANGEMENT + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_MONOSPACED_NUMBERS: for #HB_AAT_LAYOUT_FEATURE_TYPE_NUMBER_SPACING + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_PROPORTIONAL_NUMBERS: for #HB_AAT_LAYOUT_FEATURE_TYPE_NUMBER_SPACING + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_THIRD_WIDTH_NUMBERS: for #HB_AAT_LAYOUT_FEATURE_TYPE_NUMBER_SPACING + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_QUARTER_WIDTH_NUMBERS: for #HB_AAT_LAYOUT_FEATURE_TYPE_NUMBER_SPACING + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_WORD_INITIAL_SWASHES_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_SMART_SWASH_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_WORD_INITIAL_SWASHES_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_SMART_SWASH_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_WORD_FINAL_SWASHES_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_SMART_SWASH_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_WORD_FINAL_SWASHES_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_SMART_SWASH_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_LINE_INITIAL_SWASHES_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_SMART_SWASH_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_LINE_INITIAL_SWASHES_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_SMART_SWASH_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_LINE_FINAL_SWASHES_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_SMART_SWASH_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_LINE_FINAL_SWASHES_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_SMART_SWASH_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_NON_FINAL_SWASHES_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_SMART_SWASH_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_NON_FINAL_SWASHES_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_SMART_SWASH_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_SHOW_DIACRITICS: for #HB_AAT_LAYOUT_FEATURE_TYPE_DIACRITICS_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_HIDE_DIACRITICS: for #HB_AAT_LAYOUT_FEATURE_TYPE_DIACRITICS_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_DECOMPOSE_DIACRITICS: for #HB_AAT_LAYOUT_FEATURE_TYPE_DIACRITICS_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_NORMAL_POSITION: for #HB_AAT_LAYOUT_FEATURE_TYPE_VERTICAL_POSITION + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_SUPERIORS: for #HB_AAT_LAYOUT_FEATURE_TYPE_VERTICAL_POSITION + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_INFERIORS: for #HB_AAT_LAYOUT_FEATURE_TYPE_VERTICAL_POSITION + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_ORDINALS: for #HB_AAT_LAYOUT_FEATURE_TYPE_VERTICAL_POSITION + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_SCIENTIFIC_INFERIORS: for #HB_AAT_LAYOUT_FEATURE_TYPE_VERTICAL_POSITION + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_NO_FRACTIONS: for #HB_AAT_LAYOUT_FEATURE_TYPE_FRACTIONS + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_VERTICAL_FRACTIONS: for #HB_AAT_LAYOUT_FEATURE_TYPE_FRACTIONS + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_DIAGONAL_FRACTIONS: for #HB_AAT_LAYOUT_FEATURE_TYPE_FRACTIONS + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_PREVENT_OVERLAP_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_OVERLAPPING_CHARACTERS_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_PREVENT_OVERLAP_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_OVERLAPPING_CHARACTERS_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_HYPHENS_TO_EM_DASH_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_TYPOGRAPHIC_EXTRAS + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_HYPHENS_TO_EM_DASH_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_TYPOGRAPHIC_EXTRAS + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_HYPHEN_TO_EN_DASH_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_TYPOGRAPHIC_EXTRAS + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_HYPHEN_TO_EN_DASH_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_TYPOGRAPHIC_EXTRAS + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_SLASHED_ZERO_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_TYPOGRAPHIC_EXTRAS + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_SLASHED_ZERO_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_TYPOGRAPHIC_EXTRAS + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_FORM_INTERROBANG_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_TYPOGRAPHIC_EXTRAS + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_FORM_INTERROBANG_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_TYPOGRAPHIC_EXTRAS + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_SMART_QUOTES_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_TYPOGRAPHIC_EXTRAS + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_SMART_QUOTES_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_TYPOGRAPHIC_EXTRAS + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_PERIODS_TO_ELLIPSIS_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_TYPOGRAPHIC_EXTRAS + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_PERIODS_TO_ELLIPSIS_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_TYPOGRAPHIC_EXTRAS + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_HYPHEN_TO_MINUS_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_MATHEMATICAL_EXTRAS + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_HYPHEN_TO_MINUS_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_MATHEMATICAL_EXTRAS + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_ASTERISK_TO_MULTIPLY_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_MATHEMATICAL_EXTRAS + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_ASTERISK_TO_MULTIPLY_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_MATHEMATICAL_EXTRAS + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_SLASH_TO_DIVIDE_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_MATHEMATICAL_EXTRAS + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_SLASH_TO_DIVIDE_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_MATHEMATICAL_EXTRAS + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_INEQUALITY_LIGATURES_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_MATHEMATICAL_EXTRAS + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_INEQUALITY_LIGATURES_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_MATHEMATICAL_EXTRAS + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_EXPONENTS_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_MATHEMATICAL_EXTRAS + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_EXPONENTS_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_MATHEMATICAL_EXTRAS + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_MATHEMATICAL_GREEK_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_MATHEMATICAL_EXTRAS + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_MATHEMATICAL_GREEK_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_MATHEMATICAL_EXTRAS + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_NO_ORNAMENTS: for #HB_AAT_LAYOUT_FEATURE_TYPE_ORNAMENT_SETS_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_DINGBATS: for #HB_AAT_LAYOUT_FEATURE_TYPE_ORNAMENT_SETS_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_PI_CHARACTERS: for #HB_AAT_LAYOUT_FEATURE_TYPE_ORNAMENT_SETS_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_FLEURONS: for #HB_AAT_LAYOUT_FEATURE_TYPE_ORNAMENT_SETS_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_DECORATIVE_BORDERS: for #HB_AAT_LAYOUT_FEATURE_TYPE_ORNAMENT_SETS_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_INTERNATIONAL_SYMBOLS: for #HB_AAT_LAYOUT_FEATURE_TYPE_ORNAMENT_SETS_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_MATH_SYMBOLS: for #HB_AAT_LAYOUT_FEATURE_TYPE_ORNAMENT_SETS_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_NO_ALTERNATES: for #HB_AAT_LAYOUT_FEATURE_TYPE_CHARACTER_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_DESIGN_LEVEL1: for #HB_AAT_LAYOUT_FEATURE_TYPE_DESIGN_COMPLEXITY_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_DESIGN_LEVEL2: for #HB_AAT_LAYOUT_FEATURE_TYPE_DESIGN_COMPLEXITY_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_DESIGN_LEVEL3: for #HB_AAT_LAYOUT_FEATURE_TYPE_DESIGN_COMPLEXITY_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_DESIGN_LEVEL4: for #HB_AAT_LAYOUT_FEATURE_TYPE_DESIGN_COMPLEXITY_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_DESIGN_LEVEL5: for #HB_AAT_LAYOUT_FEATURE_TYPE_DESIGN_COMPLEXITY_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_NO_STYLE_OPTIONS: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLE_OPTIONS + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_DISPLAY_TEXT: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLE_OPTIONS + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_ENGRAVED_TEXT: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLE_OPTIONS + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_ILLUMINATED_CAPS: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLE_OPTIONS + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_TITLING_CAPS: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLE_OPTIONS + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_TALL_CAPS: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLE_OPTIONS + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_TRADITIONAL_CHARACTERS: for #HB_AAT_LAYOUT_FEATURE_TYPE_CHARACTER_SHAPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_SIMPLIFIED_CHARACTERS: for #HB_AAT_LAYOUT_FEATURE_TYPE_CHARACTER_SHAPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_JIS1978_CHARACTERS: for #HB_AAT_LAYOUT_FEATURE_TYPE_CHARACTER_SHAPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_JIS1983_CHARACTERS: for #HB_AAT_LAYOUT_FEATURE_TYPE_CHARACTER_SHAPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_JIS1990_CHARACTERS: for #HB_AAT_LAYOUT_FEATURE_TYPE_CHARACTER_SHAPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_TRADITIONAL_ALT_ONE: for #HB_AAT_LAYOUT_FEATURE_TYPE_CHARACTER_SHAPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_TRADITIONAL_ALT_TWO: for #HB_AAT_LAYOUT_FEATURE_TYPE_CHARACTER_SHAPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_TRADITIONAL_ALT_THREE: for #HB_AAT_LAYOUT_FEATURE_TYPE_CHARACTER_SHAPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_TRADITIONAL_ALT_FOUR: for #HB_AAT_LAYOUT_FEATURE_TYPE_CHARACTER_SHAPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_TRADITIONAL_ALT_FIVE: for #HB_AAT_LAYOUT_FEATURE_TYPE_CHARACTER_SHAPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_EXPERT_CHARACTERS: for #HB_AAT_LAYOUT_FEATURE_TYPE_CHARACTER_SHAPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_JIS2004_CHARACTERS: for #HB_AAT_LAYOUT_FEATURE_TYPE_CHARACTER_SHAPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_HOJO_CHARACTERS: for #HB_AAT_LAYOUT_FEATURE_TYPE_CHARACTER_SHAPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_NLCCHARACTERS: for #HB_AAT_LAYOUT_FEATURE_TYPE_CHARACTER_SHAPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_TRADITIONAL_NAMES_CHARACTERS: for #HB_AAT_LAYOUT_FEATURE_TYPE_CHARACTER_SHAPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_LOWER_CASE_NUMBERS: for #HB_AAT_LAYOUT_FEATURE_TYPE_NUMBER_CASE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_UPPER_CASE_NUMBERS: for #HB_AAT_LAYOUT_FEATURE_TYPE_NUMBER_CASE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_PROPORTIONAL_TEXT: for #HB_AAT_LAYOUT_FEATURE_TYPE_TEXT_SPACING + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_MONOSPACED_TEXT: for #HB_AAT_LAYOUT_FEATURE_TYPE_TEXT_SPACING + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_HALF_WIDTH_TEXT: for #HB_AAT_LAYOUT_FEATURE_TYPE_TEXT_SPACING + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_THIRD_WIDTH_TEXT: for #HB_AAT_LAYOUT_FEATURE_TYPE_TEXT_SPACING + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_QUARTER_WIDTH_TEXT: for #HB_AAT_LAYOUT_FEATURE_TYPE_TEXT_SPACING + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_ALT_PROPORTIONAL_TEXT: for #HB_AAT_LAYOUT_FEATURE_TYPE_TEXT_SPACING + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_ALT_HALF_WIDTH_TEXT: for #HB_AAT_LAYOUT_FEATURE_TYPE_TEXT_SPACING + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_NO_TRANSLITERATION: for #HB_AAT_LAYOUT_FEATURE_TYPE_TRANSLITERATION + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_HANJA_TO_HANGUL: for #HB_AAT_LAYOUT_FEATURE_TYPE_TRANSLITERATION + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_HIRAGANA_TO_KATAKANA: for #HB_AAT_LAYOUT_FEATURE_TYPE_TRANSLITERATION + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_KATAKANA_TO_HIRAGANA: for #HB_AAT_LAYOUT_FEATURE_TYPE_TRANSLITERATION + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_KANA_TO_ROMANIZATION: for #HB_AAT_LAYOUT_FEATURE_TYPE_TRANSLITERATION + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_ROMANIZATION_TO_HIRAGANA: for #HB_AAT_LAYOUT_FEATURE_TYPE_TRANSLITERATION + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_ROMANIZATION_TO_KATAKANA: for #HB_AAT_LAYOUT_FEATURE_TYPE_TRANSLITERATION + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_HANJA_TO_HANGUL_ALT_ONE: for #HB_AAT_LAYOUT_FEATURE_TYPE_TRANSLITERATION + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_HANJA_TO_HANGUL_ALT_TWO: for #HB_AAT_LAYOUT_FEATURE_TYPE_TRANSLITERATION + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_HANJA_TO_HANGUL_ALT_THREE: for #HB_AAT_LAYOUT_FEATURE_TYPE_TRANSLITERATION + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_NO_ANNOTATION: for #HB_AAT_LAYOUT_FEATURE_TYPE_ANNOTATION_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_BOX_ANNOTATION: for #HB_AAT_LAYOUT_FEATURE_TYPE_ANNOTATION_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_ROUNDED_BOX_ANNOTATION: for #HB_AAT_LAYOUT_FEATURE_TYPE_ANNOTATION_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_CIRCLE_ANNOTATION: for #HB_AAT_LAYOUT_FEATURE_TYPE_ANNOTATION_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_INVERTED_CIRCLE_ANNOTATION: for #HB_AAT_LAYOUT_FEATURE_TYPE_ANNOTATION_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_PARENTHESIS_ANNOTATION: for #HB_AAT_LAYOUT_FEATURE_TYPE_ANNOTATION_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_PERIOD_ANNOTATION: for #HB_AAT_LAYOUT_FEATURE_TYPE_ANNOTATION_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_ROMAN_NUMERAL_ANNOTATION: for #HB_AAT_LAYOUT_FEATURE_TYPE_ANNOTATION_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_DIAMOND_ANNOTATION: for #HB_AAT_LAYOUT_FEATURE_TYPE_ANNOTATION_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_INVERTED_BOX_ANNOTATION: for #HB_AAT_LAYOUT_FEATURE_TYPE_ANNOTATION_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_INVERTED_ROUNDED_BOX_ANNOTATION: for #HB_AAT_LAYOUT_FEATURE_TYPE_ANNOTATION_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_FULL_WIDTH_KANA: for #HB_AAT_LAYOUT_FEATURE_TYPE_KANA_SPACING_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_PROPORTIONAL_KANA: for #HB_AAT_LAYOUT_FEATURE_TYPE_KANA_SPACING_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_FULL_WIDTH_IDEOGRAPHS: for #HB_AAT_LAYOUT_FEATURE_TYPE_IDEOGRAPHIC_SPACING_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_PROPORTIONAL_IDEOGRAPHS: for #HB_AAT_LAYOUT_FEATURE_TYPE_IDEOGRAPHIC_SPACING_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_HALF_WIDTH_IDEOGRAPHS: for #HB_AAT_LAYOUT_FEATURE_TYPE_IDEOGRAPHIC_SPACING_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_CANONICAL_COMPOSITION_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_UNICODE_DECOMPOSITION_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_CANONICAL_COMPOSITION_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_UNICODE_DECOMPOSITION_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_COMPATIBILITY_COMPOSITION_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_UNICODE_DECOMPOSITION_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_COMPATIBILITY_COMPOSITION_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_UNICODE_DECOMPOSITION_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_TRANSCODING_COMPOSITION_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_UNICODE_DECOMPOSITION_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_TRANSCODING_COMPOSITION_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_UNICODE_DECOMPOSITION_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_NO_RUBY_KANA: Deprecated; use #HB_AAT_LAYOUT_FEATURE_SELECTOR_RUBY_KANA_OFF instead + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_RUBY_KANA: Deprecated; use #HB_AAT_LAYOUT_FEATURE_SELECTOR_RUBY_KANA_ON instead + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_RUBY_KANA_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_RUBY_KANA + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_RUBY_KANA_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_RUBY_KANA + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_NO_CJK_SYMBOL_ALTERNATIVES: for #HB_AAT_LAYOUT_FEATURE_TYPE_CJK_SYMBOL_ALTERNATIVES_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_CJK_SYMBOL_ALT_ONE: for #HB_AAT_LAYOUT_FEATURE_TYPE_CJK_SYMBOL_ALTERNATIVES_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_CJK_SYMBOL_ALT_TWO: for #HB_AAT_LAYOUT_FEATURE_TYPE_CJK_SYMBOL_ALTERNATIVES_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_CJK_SYMBOL_ALT_THREE: for #HB_AAT_LAYOUT_FEATURE_TYPE_CJK_SYMBOL_ALTERNATIVES_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_CJK_SYMBOL_ALT_FOUR: for #HB_AAT_LAYOUT_FEATURE_TYPE_CJK_SYMBOL_ALTERNATIVES_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_CJK_SYMBOL_ALT_FIVE: for #HB_AAT_LAYOUT_FEATURE_TYPE_CJK_SYMBOL_ALTERNATIVES_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_NO_IDEOGRAPHIC_ALTERNATIVES: for #HB_AAT_LAYOUT_FEATURE_TYPE_IDEOGRAPHIC_ALTERNATIVES_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_IDEOGRAPHIC_ALT_ONE: for #HB_AAT_LAYOUT_FEATURE_TYPE_IDEOGRAPHIC_ALTERNATIVES_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_IDEOGRAPHIC_ALT_TWO: for #HB_AAT_LAYOUT_FEATURE_TYPE_IDEOGRAPHIC_ALTERNATIVES_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_IDEOGRAPHIC_ALT_THREE: for #HB_AAT_LAYOUT_FEATURE_TYPE_IDEOGRAPHIC_ALTERNATIVES_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_IDEOGRAPHIC_ALT_FOUR: for #HB_AAT_LAYOUT_FEATURE_TYPE_IDEOGRAPHIC_ALTERNATIVES_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_IDEOGRAPHIC_ALT_FIVE: for #HB_AAT_LAYOUT_FEATURE_TYPE_IDEOGRAPHIC_ALTERNATIVES_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_CJK_VERTICAL_ROMAN_CENTERED: for #HB_AAT_LAYOUT_FEATURE_TYPE_CJK_VERTICAL_ROMAN_PLACEMENT_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_CJK_VERTICAL_ROMAN_HBASELINE: for #HB_AAT_LAYOUT_FEATURE_TYPE_CJK_VERTICAL_ROMAN_PLACEMENT_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_NO_CJK_ITALIC_ROMAN: Deprecated; use #HB_AAT_LAYOUT_FEATURE_SELECTOR_CJK_ITALIC_ROMAN_OFF instead + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_CJK_ITALIC_ROMAN: Deprecated; use #HB_AAT_LAYOUT_FEATURE_SELECTOR_CJK_ITALIC_ROMAN_ON instead + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_CJK_ITALIC_ROMAN_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_ITALIC_CJK_ROMAN + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_CJK_ITALIC_ROMAN_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_ITALIC_CJK_ROMAN + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_CASE_SENSITIVE_LAYOUT_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_CASE_SENSITIVE_LAYOUT + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_CASE_SENSITIVE_LAYOUT_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_CASE_SENSITIVE_LAYOUT + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_CASE_SENSITIVE_SPACING_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_CASE_SENSITIVE_LAYOUT + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_CASE_SENSITIVE_SPACING_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_CASE_SENSITIVE_LAYOUT + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_ALTERNATE_HORIZ_KANA_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_ALTERNATE_KANA + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_ALTERNATE_HORIZ_KANA_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_ALTERNATE_KANA + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_ALTERNATE_VERT_KANA_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_ALTERNATE_KANA + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_ALTERNATE_VERT_KANA_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_ALTERNATE_KANA + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_NO_STYLISTIC_ALTERNATES: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLISTIC_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_ONE_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLISTIC_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_ONE_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLISTIC_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_TWO_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLISTIC_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_TWO_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLISTIC_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_THREE_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLISTIC_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_THREE_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLISTIC_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_FOUR_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLISTIC_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_FOUR_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLISTIC_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_FIVE_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLISTIC_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_FIVE_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLISTIC_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_SIX_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLISTIC_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_SIX_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLISTIC_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_SEVEN_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLISTIC_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_SEVEN_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLISTIC_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_EIGHT_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLISTIC_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_EIGHT_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLISTIC_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_NINE_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLISTIC_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_NINE_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLISTIC_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_TEN_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLISTIC_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_TEN_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLISTIC_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_ELEVEN_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLISTIC_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_ELEVEN_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLISTIC_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_TWELVE_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLISTIC_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_TWELVE_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLISTIC_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_THIRTEEN_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLISTIC_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_THIRTEEN_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLISTIC_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_FOURTEEN_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLISTIC_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_FOURTEEN_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLISTIC_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_FIFTEEN_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLISTIC_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_FIFTEEN_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLISTIC_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_SIXTEEN_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLISTIC_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_SIXTEEN_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLISTIC_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_SEVENTEEN_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLISTIC_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_SEVENTEEN_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLISTIC_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_EIGHTEEN_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLISTIC_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_EIGHTEEN_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLISTIC_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_NINETEEN_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLISTIC_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_NINETEEN_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLISTIC_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_TWENTY_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLISTIC_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_TWENTY_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLISTIC_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_CONTEXTUAL_ALTERNATES_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_CONTEXTUAL_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_CONTEXTUAL_ALTERNATES_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_CONTEXTUAL_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_SWASH_ALTERNATES_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_CONTEXTUAL_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_SWASH_ALTERNATES_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_CONTEXTUAL_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_CONTEXTUAL_SWASH_ALTERNATES_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_CONTEXTUAL_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_CONTEXTUAL_SWASH_ALTERNATES_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_CONTEXTUAL_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_DEFAULT_LOWER_CASE: for #HB_AAT_LAYOUT_FEATURE_TYPE_LOWER_CASE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_LOWER_CASE_SMALL_CAPS: for #HB_AAT_LAYOUT_FEATURE_TYPE_LOWER_CASE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_LOWER_CASE_PETITE_CAPS: for #HB_AAT_LAYOUT_FEATURE_TYPE_LOWER_CASE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_DEFAULT_UPPER_CASE: for #HB_AAT_LAYOUT_FEATURE_TYPE_UPPER_CASE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_UPPER_CASE_SMALL_CAPS: for #HB_AAT_LAYOUT_FEATURE_TYPE_UPPER_CASE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_UPPER_CASE_PETITE_CAPS: for #HB_AAT_LAYOUT_FEATURE_TYPE_UPPER_CASE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_HALF_WIDTH_CJK_ROMAN: for #HB_AAT_LAYOUT_FEATURE_TYPE_CJK_ROMAN_SPACING_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_PROPORTIONAL_CJK_ROMAN: for #HB_AAT_LAYOUT_FEATURE_TYPE_CJK_ROMAN_SPACING_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_DEFAULT_CJK_ROMAN: for #HB_AAT_LAYOUT_FEATURE_TYPE_CJK_ROMAN_SPACING_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_FULL_WIDTH_CJK_ROMAN: for #HB_AAT_LAYOUT_FEATURE_TYPE_CJK_ROMAN_SPACING_TYPE + * + * The selectors defined for specifying AAT feature settings. + * + * Since: 2.2.0 + */ +typedef enum +{ + HB_AAT_LAYOUT_FEATURE_SELECTOR_INVALID = 0xFFFF, + + /* Selectors for #HB_AAT_LAYOUT_FEATURE_TYPE_ALL_TYPOGRAPHIC */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_ALL_TYPE_FEATURES_ON = 0, + HB_AAT_LAYOUT_FEATURE_SELECTOR_ALL_TYPE_FEATURES_OFF = 1, + + /* Selectors for #HB_AAT_LAYOUT_FEATURE_TYPE_LIGATURES */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_REQUIRED_LIGATURES_ON = 0, + HB_AAT_LAYOUT_FEATURE_SELECTOR_REQUIRED_LIGATURES_OFF = 1, + HB_AAT_LAYOUT_FEATURE_SELECTOR_COMMON_LIGATURES_ON = 2, + HB_AAT_LAYOUT_FEATURE_SELECTOR_COMMON_LIGATURES_OFF = 3, + HB_AAT_LAYOUT_FEATURE_SELECTOR_RARE_LIGATURES_ON = 4, + HB_AAT_LAYOUT_FEATURE_SELECTOR_RARE_LIGATURES_OFF = 5, + HB_AAT_LAYOUT_FEATURE_SELECTOR_LOGOS_ON = 6, + HB_AAT_LAYOUT_FEATURE_SELECTOR_LOGOS_OFF = 7, + HB_AAT_LAYOUT_FEATURE_SELECTOR_REBUS_PICTURES_ON = 8, + HB_AAT_LAYOUT_FEATURE_SELECTOR_REBUS_PICTURES_OFF = 9, + HB_AAT_LAYOUT_FEATURE_SELECTOR_DIPHTHONG_LIGATURES_ON = 10, + HB_AAT_LAYOUT_FEATURE_SELECTOR_DIPHTHONG_LIGATURES_OFF = 11, + HB_AAT_LAYOUT_FEATURE_SELECTOR_SQUARED_LIGATURES_ON = 12, + HB_AAT_LAYOUT_FEATURE_SELECTOR_SQUARED_LIGATURES_OFF = 13, + HB_AAT_LAYOUT_FEATURE_SELECTOR_ABBREV_SQUARED_LIGATURES_ON = 14, + HB_AAT_LAYOUT_FEATURE_SELECTOR_ABBREV_SQUARED_LIGATURES_OFF = 15, + HB_AAT_LAYOUT_FEATURE_SELECTOR_SYMBOL_LIGATURES_ON = 16, + HB_AAT_LAYOUT_FEATURE_SELECTOR_SYMBOL_LIGATURES_OFF = 17, + HB_AAT_LAYOUT_FEATURE_SELECTOR_CONTEXTUAL_LIGATURES_ON = 18, + HB_AAT_LAYOUT_FEATURE_SELECTOR_CONTEXTUAL_LIGATURES_OFF = 19, + HB_AAT_LAYOUT_FEATURE_SELECTOR_HISTORICAL_LIGATURES_ON = 20, + HB_AAT_LAYOUT_FEATURE_SELECTOR_HISTORICAL_LIGATURES_OFF = 21, + + /* Selectors for #HB_AAT_LAYOUT_FEATURE_TYPE_LIGATURES */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_UNCONNECTED = 0, + HB_AAT_LAYOUT_FEATURE_SELECTOR_PARTIALLY_CONNECTED = 1, + HB_AAT_LAYOUT_FEATURE_SELECTOR_CURSIVE = 2, + + /* Selectors for #HB_AAT_LAYOUT_FEATURE_TYPE_LETTER_CASE */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_UPPER_AND_LOWER_CASE = 0, /* deprecated */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_ALL_CAPS = 1, /* deprecated */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_ALL_LOWER_CASE = 2, /* deprecated */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_SMALL_CAPS = 3, /* deprecated */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_INITIAL_CAPS = 4, /* deprecated */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_INITIAL_CAPS_AND_SMALL_CAPS = 5, /* deprecated */ + + /* Selectors for #HB_AAT_LAYOUT_FEATURE_TYPE_VERTICAL_SUBSTITUTION */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_SUBSTITUTE_VERTICAL_FORMS_ON = 0, + HB_AAT_LAYOUT_FEATURE_SELECTOR_SUBSTITUTE_VERTICAL_FORMS_OFF = 1, + + /* Selectors for #HB_AAT_LAYOUT_FEATURE_TYPE_LINGUISTIC_REARRANGEMENT */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_LINGUISTIC_REARRANGEMENT_ON = 0, + HB_AAT_LAYOUT_FEATURE_SELECTOR_LINGUISTIC_REARRANGEMENT_OFF = 1, + + /* Selectors for #HB_AAT_LAYOUT_FEATURE_TYPE_NUMBER_SPACING */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_MONOSPACED_NUMBERS = 0, + HB_AAT_LAYOUT_FEATURE_SELECTOR_PROPORTIONAL_NUMBERS = 1, + HB_AAT_LAYOUT_FEATURE_SELECTOR_THIRD_WIDTH_NUMBERS = 2, + HB_AAT_LAYOUT_FEATURE_SELECTOR_QUARTER_WIDTH_NUMBERS = 3, + + /* Selectors for #HB_AAT_LAYOUT_FEATURE_TYPE_SMART_SWASH_TYPE */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_WORD_INITIAL_SWASHES_ON = 0, + HB_AAT_LAYOUT_FEATURE_SELECTOR_WORD_INITIAL_SWASHES_OFF = 1, + HB_AAT_LAYOUT_FEATURE_SELECTOR_WORD_FINAL_SWASHES_ON = 2, + HB_AAT_LAYOUT_FEATURE_SELECTOR_WORD_FINAL_SWASHES_OFF = 3, + HB_AAT_LAYOUT_FEATURE_SELECTOR_LINE_INITIAL_SWASHES_ON = 4, + HB_AAT_LAYOUT_FEATURE_SELECTOR_LINE_INITIAL_SWASHES_OFF = 5, + HB_AAT_LAYOUT_FEATURE_SELECTOR_LINE_FINAL_SWASHES_ON = 6, + HB_AAT_LAYOUT_FEATURE_SELECTOR_LINE_FINAL_SWASHES_OFF = 7, + HB_AAT_LAYOUT_FEATURE_SELECTOR_NON_FINAL_SWASHES_ON = 8, + HB_AAT_LAYOUT_FEATURE_SELECTOR_NON_FINAL_SWASHES_OFF = 9, + + /* Selectors for #HB_AAT_LAYOUT_FEATURE_TYPE_DIACRITICS_TYPE */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_SHOW_DIACRITICS = 0, + HB_AAT_LAYOUT_FEATURE_SELECTOR_HIDE_DIACRITICS = 1, + HB_AAT_LAYOUT_FEATURE_SELECTOR_DECOMPOSE_DIACRITICS = 2, + + /* Selectors for #HB_AAT_LAYOUT_FEATURE_TYPE_VERTICAL_POSITION */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_NORMAL_POSITION = 0, + HB_AAT_LAYOUT_FEATURE_SELECTOR_SUPERIORS = 1, + HB_AAT_LAYOUT_FEATURE_SELECTOR_INFERIORS = 2, + HB_AAT_LAYOUT_FEATURE_SELECTOR_ORDINALS = 3, + HB_AAT_LAYOUT_FEATURE_SELECTOR_SCIENTIFIC_INFERIORS = 4, + + /* Selectors for #HB_AAT_LAYOUT_FEATURE_TYPE_FRACTIONS */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_NO_FRACTIONS = 0, + HB_AAT_LAYOUT_FEATURE_SELECTOR_VERTICAL_FRACTIONS = 1, + HB_AAT_LAYOUT_FEATURE_SELECTOR_DIAGONAL_FRACTIONS = 2, + + /* Selectors for #HB_AAT_LAYOUT_FEATURE_TYPE_OVERLAPPING_CHARACTERS_TYPE */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_PREVENT_OVERLAP_ON = 0, + HB_AAT_LAYOUT_FEATURE_SELECTOR_PREVENT_OVERLAP_OFF = 1, + + /* Selectors for #HB_AAT_LAYOUT_FEATURE_TYPE_TYPOGRAPHIC_EXTRAS */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_HYPHENS_TO_EM_DASH_ON = 0, + HB_AAT_LAYOUT_FEATURE_SELECTOR_HYPHENS_TO_EM_DASH_OFF = 1, + HB_AAT_LAYOUT_FEATURE_SELECTOR_HYPHEN_TO_EN_DASH_ON = 2, + HB_AAT_LAYOUT_FEATURE_SELECTOR_HYPHEN_TO_EN_DASH_OFF = 3, + HB_AAT_LAYOUT_FEATURE_SELECTOR_SLASHED_ZERO_ON = 4, + HB_AAT_LAYOUT_FEATURE_SELECTOR_SLASHED_ZERO_OFF = 5, + HB_AAT_LAYOUT_FEATURE_SELECTOR_FORM_INTERROBANG_ON = 6, + HB_AAT_LAYOUT_FEATURE_SELECTOR_FORM_INTERROBANG_OFF = 7, + HB_AAT_LAYOUT_FEATURE_SELECTOR_SMART_QUOTES_ON = 8, + HB_AAT_LAYOUT_FEATURE_SELECTOR_SMART_QUOTES_OFF = 9, + HB_AAT_LAYOUT_FEATURE_SELECTOR_PERIODS_TO_ELLIPSIS_ON = 10, + HB_AAT_LAYOUT_FEATURE_SELECTOR_PERIODS_TO_ELLIPSIS_OFF = 11, + + /* Selectors for #HB_AAT_LAYOUT_FEATURE_TYPE_MATHEMATICAL_EXTRAS */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_HYPHEN_TO_MINUS_ON = 0, + HB_AAT_LAYOUT_FEATURE_SELECTOR_HYPHEN_TO_MINUS_OFF = 1, + HB_AAT_LAYOUT_FEATURE_SELECTOR_ASTERISK_TO_MULTIPLY_ON = 2, + HB_AAT_LAYOUT_FEATURE_SELECTOR_ASTERISK_TO_MULTIPLY_OFF = 3, + HB_AAT_LAYOUT_FEATURE_SELECTOR_SLASH_TO_DIVIDE_ON = 4, + HB_AAT_LAYOUT_FEATURE_SELECTOR_SLASH_TO_DIVIDE_OFF = 5, + HB_AAT_LAYOUT_FEATURE_SELECTOR_INEQUALITY_LIGATURES_ON = 6, + HB_AAT_LAYOUT_FEATURE_SELECTOR_INEQUALITY_LIGATURES_OFF = 7, + HB_AAT_LAYOUT_FEATURE_SELECTOR_EXPONENTS_ON = 8, + HB_AAT_LAYOUT_FEATURE_SELECTOR_EXPONENTS_OFF = 9, + HB_AAT_LAYOUT_FEATURE_SELECTOR_MATHEMATICAL_GREEK_ON = 10, + HB_AAT_LAYOUT_FEATURE_SELECTOR_MATHEMATICAL_GREEK_OFF = 11, + + /* Selectors for #HB_AAT_LAYOUT_FEATURE_TYPE_ORNAMENT_SETS_TYPE */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_NO_ORNAMENTS = 0, + HB_AAT_LAYOUT_FEATURE_SELECTOR_DINGBATS = 1, + HB_AAT_LAYOUT_FEATURE_SELECTOR_PI_CHARACTERS = 2, + HB_AAT_LAYOUT_FEATURE_SELECTOR_FLEURONS = 3, + HB_AAT_LAYOUT_FEATURE_SELECTOR_DECORATIVE_BORDERS = 4, + HB_AAT_LAYOUT_FEATURE_SELECTOR_INTERNATIONAL_SYMBOLS = 5, + HB_AAT_LAYOUT_FEATURE_SELECTOR_MATH_SYMBOLS = 6, + + /* Selectors for #HB_AAT_LAYOUT_FEATURE_TYPE_CHARACTER_ALTERNATIVES */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_NO_ALTERNATES = 0, + + /* Selectors for #HB_AAT_LAYOUT_FEATURE_TYPE_DESIGN_COMPLEXITY_TYPE */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_DESIGN_LEVEL1 = 0, + HB_AAT_LAYOUT_FEATURE_SELECTOR_DESIGN_LEVEL2 = 1, + HB_AAT_LAYOUT_FEATURE_SELECTOR_DESIGN_LEVEL3 = 2, + HB_AAT_LAYOUT_FEATURE_SELECTOR_DESIGN_LEVEL4 = 3, + HB_AAT_LAYOUT_FEATURE_SELECTOR_DESIGN_LEVEL5 = 4, + + /* Selectors for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLE_OPTIONS */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_NO_STYLE_OPTIONS = 0, + HB_AAT_LAYOUT_FEATURE_SELECTOR_DISPLAY_TEXT = 1, + HB_AAT_LAYOUT_FEATURE_SELECTOR_ENGRAVED_TEXT = 2, + HB_AAT_LAYOUT_FEATURE_SELECTOR_ILLUMINATED_CAPS = 3, + HB_AAT_LAYOUT_FEATURE_SELECTOR_TITLING_CAPS = 4, + HB_AAT_LAYOUT_FEATURE_SELECTOR_TALL_CAPS = 5, + + /* Selectors for #HB_AAT_LAYOUT_FEATURE_TYPE_CHARACTER_SHAPE */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_TRADITIONAL_CHARACTERS = 0, + HB_AAT_LAYOUT_FEATURE_SELECTOR_SIMPLIFIED_CHARACTERS = 1, + HB_AAT_LAYOUT_FEATURE_SELECTOR_JIS1978_CHARACTERS = 2, + HB_AAT_LAYOUT_FEATURE_SELECTOR_JIS1983_CHARACTERS = 3, + HB_AAT_LAYOUT_FEATURE_SELECTOR_JIS1990_CHARACTERS = 4, + HB_AAT_LAYOUT_FEATURE_SELECTOR_TRADITIONAL_ALT_ONE = 5, + HB_AAT_LAYOUT_FEATURE_SELECTOR_TRADITIONAL_ALT_TWO = 6, + HB_AAT_LAYOUT_FEATURE_SELECTOR_TRADITIONAL_ALT_THREE = 7, + HB_AAT_LAYOUT_FEATURE_SELECTOR_TRADITIONAL_ALT_FOUR = 8, + HB_AAT_LAYOUT_FEATURE_SELECTOR_TRADITIONAL_ALT_FIVE = 9, + HB_AAT_LAYOUT_FEATURE_SELECTOR_EXPERT_CHARACTERS = 10, + HB_AAT_LAYOUT_FEATURE_SELECTOR_JIS2004_CHARACTERS = 11, + HB_AAT_LAYOUT_FEATURE_SELECTOR_HOJO_CHARACTERS = 12, + HB_AAT_LAYOUT_FEATURE_SELECTOR_NLCCHARACTERS = 13, + HB_AAT_LAYOUT_FEATURE_SELECTOR_TRADITIONAL_NAMES_CHARACTERS = 14, + + /* Selectors for #HB_AAT_LAYOUT_FEATURE_TYPE_NUMBER_CASE */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_LOWER_CASE_NUMBERS = 0, + HB_AAT_LAYOUT_FEATURE_SELECTOR_UPPER_CASE_NUMBERS = 1, + + /* Selectors for #HB_AAT_LAYOUT_FEATURE_TYPE_TEXT_SPACING */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_PROPORTIONAL_TEXT = 0, + HB_AAT_LAYOUT_FEATURE_SELECTOR_MONOSPACED_TEXT = 1, + HB_AAT_LAYOUT_FEATURE_SELECTOR_HALF_WIDTH_TEXT = 2, + HB_AAT_LAYOUT_FEATURE_SELECTOR_THIRD_WIDTH_TEXT = 3, + HB_AAT_LAYOUT_FEATURE_SELECTOR_QUARTER_WIDTH_TEXT = 4, + HB_AAT_LAYOUT_FEATURE_SELECTOR_ALT_PROPORTIONAL_TEXT = 5, + HB_AAT_LAYOUT_FEATURE_SELECTOR_ALT_HALF_WIDTH_TEXT = 6, + + /* Selectors for #HB_AAT_LAYOUT_FEATURE_TYPE_TRANSLITERATION */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_NO_TRANSLITERATION = 0, + HB_AAT_LAYOUT_FEATURE_SELECTOR_HANJA_TO_HANGUL = 1, + HB_AAT_LAYOUT_FEATURE_SELECTOR_HIRAGANA_TO_KATAKANA = 2, + HB_AAT_LAYOUT_FEATURE_SELECTOR_KATAKANA_TO_HIRAGANA = 3, + HB_AAT_LAYOUT_FEATURE_SELECTOR_KANA_TO_ROMANIZATION = 4, + HB_AAT_LAYOUT_FEATURE_SELECTOR_ROMANIZATION_TO_HIRAGANA = 5, + HB_AAT_LAYOUT_FEATURE_SELECTOR_ROMANIZATION_TO_KATAKANA = 6, + HB_AAT_LAYOUT_FEATURE_SELECTOR_HANJA_TO_HANGUL_ALT_ONE = 7, + HB_AAT_LAYOUT_FEATURE_SELECTOR_HANJA_TO_HANGUL_ALT_TWO = 8, + HB_AAT_LAYOUT_FEATURE_SELECTOR_HANJA_TO_HANGUL_ALT_THREE = 9, + + /* Selectors for #HB_AAT_LAYOUT_FEATURE_TYPE_ANNOTATION_TYPE */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_NO_ANNOTATION = 0, + HB_AAT_LAYOUT_FEATURE_SELECTOR_BOX_ANNOTATION = 1, + HB_AAT_LAYOUT_FEATURE_SELECTOR_ROUNDED_BOX_ANNOTATION = 2, + HB_AAT_LAYOUT_FEATURE_SELECTOR_CIRCLE_ANNOTATION = 3, + HB_AAT_LAYOUT_FEATURE_SELECTOR_INVERTED_CIRCLE_ANNOTATION = 4, + HB_AAT_LAYOUT_FEATURE_SELECTOR_PARENTHESIS_ANNOTATION = 5, + HB_AAT_LAYOUT_FEATURE_SELECTOR_PERIOD_ANNOTATION = 6, + HB_AAT_LAYOUT_FEATURE_SELECTOR_ROMAN_NUMERAL_ANNOTATION = 7, + HB_AAT_LAYOUT_FEATURE_SELECTOR_DIAMOND_ANNOTATION = 8, + HB_AAT_LAYOUT_FEATURE_SELECTOR_INVERTED_BOX_ANNOTATION = 9, + HB_AAT_LAYOUT_FEATURE_SELECTOR_INVERTED_ROUNDED_BOX_ANNOTATION= 10, + + /* Selectors for #HB_AAT_LAYOUT_FEATURE_TYPE_KANA_SPACING_TYPE */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_FULL_WIDTH_KANA = 0, + HB_AAT_LAYOUT_FEATURE_SELECTOR_PROPORTIONAL_KANA = 1, + + /* Selectors for #HB_AAT_LAYOUT_FEATURE_TYPE_IDEOGRAPHIC_SPACING_TYPE */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_FULL_WIDTH_IDEOGRAPHS = 0, + HB_AAT_LAYOUT_FEATURE_SELECTOR_PROPORTIONAL_IDEOGRAPHS = 1, + HB_AAT_LAYOUT_FEATURE_SELECTOR_HALF_WIDTH_IDEOGRAPHS = 2, + + /* Selectors for #HB_AAT_LAYOUT_FEATURE_TYPE_UNICODE_DECOMPOSITION_TYPE */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_CANONICAL_COMPOSITION_ON = 0, + HB_AAT_LAYOUT_FEATURE_SELECTOR_CANONICAL_COMPOSITION_OFF = 1, + HB_AAT_LAYOUT_FEATURE_SELECTOR_COMPATIBILITY_COMPOSITION_ON = 2, + HB_AAT_LAYOUT_FEATURE_SELECTOR_COMPATIBILITY_COMPOSITION_OFF = 3, + HB_AAT_LAYOUT_FEATURE_SELECTOR_TRANSCODING_COMPOSITION_ON = 4, + HB_AAT_LAYOUT_FEATURE_SELECTOR_TRANSCODING_COMPOSITION_OFF = 5, + + /* Selectors for #HB_AAT_LAYOUT_FEATURE_TYPE_RUBY_KANA */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_NO_RUBY_KANA = 0, /* deprecated - use HB_AAT_LAYOUT_FEATURE_SELECTOR_RUBY_KANA_OFF instead */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_RUBY_KANA = 1, /* deprecated - use HB_AAT_LAYOUT_FEATURE_SELECTOR_RUBY_KANA_ON instead */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_RUBY_KANA_ON = 2, + HB_AAT_LAYOUT_FEATURE_SELECTOR_RUBY_KANA_OFF = 3, + + /* Selectors for #HB_AAT_LAYOUT_FEATURE_TYPE_CJK_SYMBOL_ALTERNATIVES_TYPE */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_NO_CJK_SYMBOL_ALTERNATIVES = 0, + HB_AAT_LAYOUT_FEATURE_SELECTOR_CJK_SYMBOL_ALT_ONE = 1, + HB_AAT_LAYOUT_FEATURE_SELECTOR_CJK_SYMBOL_ALT_TWO = 2, + HB_AAT_LAYOUT_FEATURE_SELECTOR_CJK_SYMBOL_ALT_THREE = 3, + HB_AAT_LAYOUT_FEATURE_SELECTOR_CJK_SYMBOL_ALT_FOUR = 4, + HB_AAT_LAYOUT_FEATURE_SELECTOR_CJK_SYMBOL_ALT_FIVE = 5, + + /* Selectors for #HB_AAT_LAYOUT_FEATURE_TYPE_IDEOGRAPHIC_ALTERNATIVES_TYPE */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_NO_IDEOGRAPHIC_ALTERNATIVES = 0, + HB_AAT_LAYOUT_FEATURE_SELECTOR_IDEOGRAPHIC_ALT_ONE = 1, + HB_AAT_LAYOUT_FEATURE_SELECTOR_IDEOGRAPHIC_ALT_TWO = 2, + HB_AAT_LAYOUT_FEATURE_SELECTOR_IDEOGRAPHIC_ALT_THREE = 3, + HB_AAT_LAYOUT_FEATURE_SELECTOR_IDEOGRAPHIC_ALT_FOUR = 4, + HB_AAT_LAYOUT_FEATURE_SELECTOR_IDEOGRAPHIC_ALT_FIVE = 5, + + /* Selectors for #HB_AAT_LAYOUT_FEATURE_TYPE_CJK_VERTICAL_ROMAN_PLACEMENT_TYPE */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_CJK_VERTICAL_ROMAN_CENTERED = 0, + HB_AAT_LAYOUT_FEATURE_SELECTOR_CJK_VERTICAL_ROMAN_HBASELINE = 1, + + /* Selectors for #HB_AAT_LAYOUT_FEATURE_TYPE_ITALIC_CJK_ROMAN */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_NO_CJK_ITALIC_ROMAN = 0, /* deprecated - use HB_AAT_LAYOUT_FEATURE_SELECTOR_CJK_ITALIC_ROMAN_OFF instead */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_CJK_ITALIC_ROMAN = 1, /* deprecated - use HB_AAT_LAYOUT_FEATURE_SELECTOR_CJK_ITALIC_ROMAN_ON instead */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_CJK_ITALIC_ROMAN_ON = 2, + HB_AAT_LAYOUT_FEATURE_SELECTOR_CJK_ITALIC_ROMAN_OFF = 3, + + /* Selectors for #HB_AAT_LAYOUT_FEATURE_TYPE_CASE_SENSITIVE_LAYOUT */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_CASE_SENSITIVE_LAYOUT_ON = 0, + HB_AAT_LAYOUT_FEATURE_SELECTOR_CASE_SENSITIVE_LAYOUT_OFF = 1, + HB_AAT_LAYOUT_FEATURE_SELECTOR_CASE_SENSITIVE_SPACING_ON = 2, + HB_AAT_LAYOUT_FEATURE_SELECTOR_CASE_SENSITIVE_SPACING_OFF = 3, + + /* Selectors for #HB_AAT_LAYOUT_FEATURE_TYPE_ALTERNATE_KANA */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_ALTERNATE_HORIZ_KANA_ON = 0, + HB_AAT_LAYOUT_FEATURE_SELECTOR_ALTERNATE_HORIZ_KANA_OFF = 1, + HB_AAT_LAYOUT_FEATURE_SELECTOR_ALTERNATE_VERT_KANA_ON = 2, + HB_AAT_LAYOUT_FEATURE_SELECTOR_ALTERNATE_VERT_KANA_OFF = 3, + + /* Selectors for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLISTIC_ALTERNATIVES */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_NO_STYLISTIC_ALTERNATES = 0, + HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_ONE_ON = 2, + HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_ONE_OFF = 3, + HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_TWO_ON = 4, + HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_TWO_OFF = 5, + HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_THREE_ON = 6, + HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_THREE_OFF = 7, + HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_FOUR_ON = 8, + HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_FOUR_OFF = 9, + HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_FIVE_ON = 10, + HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_FIVE_OFF = 11, + HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_SIX_ON = 12, + HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_SIX_OFF = 13, + HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_SEVEN_ON = 14, + HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_SEVEN_OFF = 15, + HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_EIGHT_ON = 16, + HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_EIGHT_OFF = 17, + HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_NINE_ON = 18, + HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_NINE_OFF = 19, + HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_TEN_ON = 20, + HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_TEN_OFF = 21, + HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_ELEVEN_ON = 22, + HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_ELEVEN_OFF = 23, + HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_TWELVE_ON = 24, + HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_TWELVE_OFF = 25, + HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_THIRTEEN_ON = 26, + HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_THIRTEEN_OFF = 27, + HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_FOURTEEN_ON = 28, + HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_FOURTEEN_OFF = 29, + HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_FIFTEEN_ON = 30, + HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_FIFTEEN_OFF = 31, + HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_SIXTEEN_ON = 32, + HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_SIXTEEN_OFF = 33, + HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_SEVENTEEN_ON = 34, + HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_SEVENTEEN_OFF = 35, + HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_EIGHTEEN_ON = 36, + HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_EIGHTEEN_OFF = 37, + HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_NINETEEN_ON = 38, + HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_NINETEEN_OFF = 39, + HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_TWENTY_ON = 40, + HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_TWENTY_OFF = 41, + + /* Selectors for #HB_AAT_LAYOUT_FEATURE_TYPE_CONTEXTUAL_ALTERNATIVES */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_CONTEXTUAL_ALTERNATES_ON = 0, + HB_AAT_LAYOUT_FEATURE_SELECTOR_CONTEXTUAL_ALTERNATES_OFF = 1, + HB_AAT_LAYOUT_FEATURE_SELECTOR_SWASH_ALTERNATES_ON = 2, + HB_AAT_LAYOUT_FEATURE_SELECTOR_SWASH_ALTERNATES_OFF = 3, + HB_AAT_LAYOUT_FEATURE_SELECTOR_CONTEXTUAL_SWASH_ALTERNATES_ON = 4, + HB_AAT_LAYOUT_FEATURE_SELECTOR_CONTEXTUAL_SWASH_ALTERNATES_OFF= 5, + + /* Selectors for #HB_AAT_LAYOUT_FEATURE_TYPE_LOWER_CASE */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_DEFAULT_LOWER_CASE = 0, + HB_AAT_LAYOUT_FEATURE_SELECTOR_LOWER_CASE_SMALL_CAPS = 1, + HB_AAT_LAYOUT_FEATURE_SELECTOR_LOWER_CASE_PETITE_CAPS = 2, + + /* Selectors for #HB_AAT_LAYOUT_FEATURE_TYPE_UPPER_CASE */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_DEFAULT_UPPER_CASE = 0, + HB_AAT_LAYOUT_FEATURE_SELECTOR_UPPER_CASE_SMALL_CAPS = 1, + HB_AAT_LAYOUT_FEATURE_SELECTOR_UPPER_CASE_PETITE_CAPS = 2, + + /* Selectors for #HB_AAT_LAYOUT_FEATURE_TYPE_CJK_ROMAN_SPACING_TYPE */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_HALF_WIDTH_CJK_ROMAN = 0, + HB_AAT_LAYOUT_FEATURE_SELECTOR_PROPORTIONAL_CJK_ROMAN = 1, + HB_AAT_LAYOUT_FEATURE_SELECTOR_DEFAULT_CJK_ROMAN = 2, + HB_AAT_LAYOUT_FEATURE_SELECTOR_FULL_WIDTH_CJK_ROMAN = 3, + + /*< private >*/ + _HB_AAT_LAYOUT_FEATURE_SELECTOR_MAX_VALUE = HB_TAG_MAX_SIGNED /*< skip >*/ +} hb_aat_layout_feature_selector_t; + +HB_EXTERN unsigned int +hb_aat_layout_get_feature_types (hb_face_t *face, + unsigned int start_offset, + unsigned int *feature_count, /* IN/OUT. May be NULL. */ + hb_aat_layout_feature_type_t *features /* OUT. May be NULL. */); + +HB_EXTERN hb_ot_name_id_t +hb_aat_layout_feature_type_get_name_id (hb_face_t *face, + hb_aat_layout_feature_type_t feature_type); + +/** + * hb_aat_layout_feature_selector_info_t: + * @name_id: The selector's name identifier + * @enable: The value to turn the selector on + * @disable: The value to turn the selector off + * + * Structure representing a setting for an #hb_aat_layout_feature_type_t. + */ +typedef struct hb_aat_layout_feature_selector_info_t { + hb_ot_name_id_t name_id; + hb_aat_layout_feature_selector_t enable; + hb_aat_layout_feature_selector_t disable; + /*< private >*/ + unsigned int reserved; +} hb_aat_layout_feature_selector_info_t; + +/** + * HB_AAT_LAYOUT_NO_SELECTOR_INDEX + * + * Used when getting or setting AAT feature selectors. Indicates that + * there is no selector index corresponding to the selector of interest. + * + */ +#define HB_AAT_LAYOUT_NO_SELECTOR_INDEX 0xFFFFu + +HB_EXTERN unsigned int +hb_aat_layout_feature_type_get_selector_infos (hb_face_t *face, + hb_aat_layout_feature_type_t feature_type, + unsigned int start_offset, + unsigned int *selector_count, /* IN/OUT. May be NULL. */ + hb_aat_layout_feature_selector_info_t *selectors, /* OUT. May be NULL. */ + unsigned int *default_index /* OUT. May be NULL. */); + + +/* + * morx/mort + */ + +HB_EXTERN hb_bool_t +hb_aat_layout_has_substitution (hb_face_t *face); + + +/* + * kerx + */ + +HB_EXTERN hb_bool_t +hb_aat_layout_has_positioning (hb_face_t *face); + + +/* + * trak + */ + +HB_EXTERN hb_bool_t +hb_aat_layout_has_tracking (hb_face_t *face); + + +HB_END_DECLS + +#endif /* HB_AAT_LAYOUT_H */ diff --git a/dependencies/linux64/include/harfbuzz/hb-aat.h b/dependencies/linux64/include/harfbuzz/hb-aat.h new file mode 100644 index 0000000..c14313d --- /dev/null +++ b/dependencies/linux64/include/harfbuzz/hb-aat.h @@ -0,0 +1,38 @@ +/* + * Copyright © 2018 Ebrahim Byagowi + * + * This is part of HarfBuzz, a text shaping library. + * + * Permission is hereby granted, without written agreement and without + * license or royalty fees, to use, copy, modify, and distribute this + * software and its documentation for any purpose, provided that the + * above copyright notice and the following two paragraphs appear in + * all copies of this software. + * + * IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE TO ANY PARTY FOR + * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES + * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN + * IF THE COPYRIGHT HOLDER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + * THE COPYRIGHT HOLDER SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, + * BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND + * FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS + * ON AN "AS IS" BASIS, AND THE COPYRIGHT HOLDER HAS NO OBLIGATION TO + * PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. + */ + +#ifndef HB_AAT_H +#define HB_AAT_H +#define HB_AAT_H_IN + +#include "hb.h" + +#include "hb-aat-layout.h" + +HB_BEGIN_DECLS + +HB_END_DECLS + +#undef HB_AAT_H_IN +#endif /* HB_AAT_H */ diff --git a/dependencies/linux64/include/harfbuzz/hb-blob.h b/dependencies/linux64/include/harfbuzz/hb-blob.h new file mode 100644 index 0000000..db50067 --- /dev/null +++ b/dependencies/linux64/include/harfbuzz/hb-blob.h @@ -0,0 +1,160 @@ +/* + * Copyright © 2009 Red Hat, Inc. + * + * This is part of HarfBuzz, a text shaping library. + * + * Permission is hereby granted, without written agreement and without + * license or royalty fees, to use, copy, modify, and distribute this + * software and its documentation for any purpose, provided that the + * above copyright notice and the following two paragraphs appear in + * all copies of this software. + * + * IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE TO ANY PARTY FOR + * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES + * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN + * IF THE COPYRIGHT HOLDER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + * THE COPYRIGHT HOLDER SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, + * BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND + * FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS + * ON AN "AS IS" BASIS, AND THE COPYRIGHT HOLDER HAS NO OBLIGATION TO + * PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. + * + * Red Hat Author(s): Behdad Esfahbod + */ + +#if !defined(HB_H_IN) && !defined(HB_NO_SINGLE_HEADER_ERROR) +#error "Include instead." +#endif + +#ifndef HB_BLOB_H +#define HB_BLOB_H + +#include "hb-common.h" + +HB_BEGIN_DECLS + + +/** + * hb_memory_mode_t: + * @HB_MEMORY_MODE_DUPLICATE: HarfBuzz immediately makes a copy of the data. + * @HB_MEMORY_MODE_READONLY: HarfBuzz client will never modify the data, + * and HarfBuzz will never modify the data. + * @HB_MEMORY_MODE_WRITABLE: HarfBuzz client made a copy of the data solely + * for HarfBuzz, so HarfBuzz may modify the data. + * @HB_MEMORY_MODE_READONLY_MAY_MAKE_WRITABLE: See above + * + * Data type holding the memory modes available to + * client programs. + * + * Regarding these various memory-modes: + * + * - In no case shall the HarfBuzz client modify memory + * that is passed to HarfBuzz in a blob. If there is + * any such possibility, @HB_MEMORY_MODE_DUPLICATE should be used + * such that HarfBuzz makes a copy immediately, + * + * - Use @HB_MEMORY_MODE_READONLY otherwise, unless you really really + * really know what you are doing, + * + * - @HB_MEMORY_MODE_WRITABLE is appropriate if you really made a + * copy of data solely for the purpose of passing to + * HarfBuzz and doing that just once (no reuse!), + * + * - If the font is mmap()ed, it's okay to use + * @HB_MEMORY_MODE_READONLY_MAY_MAKE_WRITABLE, however, using that mode + * correctly is very tricky. Use @HB_MEMORY_MODE_READONLY instead. + **/ +typedef enum { + HB_MEMORY_MODE_DUPLICATE, + HB_MEMORY_MODE_READONLY, + HB_MEMORY_MODE_WRITABLE, + HB_MEMORY_MODE_READONLY_MAY_MAKE_WRITABLE +} hb_memory_mode_t; + +/** + * hb_blob_t: + * + * Data type for blobs. A blob wraps a chunk of binary + * data and facilitates its lifecycle management between + * a client program and HarfBuzz. + * + **/ +typedef struct hb_blob_t hb_blob_t; + +HB_EXTERN hb_blob_t * +hb_blob_create (const char *data, + unsigned int length, + hb_memory_mode_t mode, + void *user_data, + hb_destroy_func_t destroy); + +HB_EXTERN hb_blob_t * +hb_blob_create_or_fail (const char *data, + unsigned int length, + hb_memory_mode_t mode, + void *user_data, + hb_destroy_func_t destroy); + +HB_EXTERN hb_blob_t * +hb_blob_create_from_file (const char *file_name); + +HB_EXTERN hb_blob_t * +hb_blob_create_from_file_or_fail (const char *file_name); + +/* Always creates with MEMORY_MODE_READONLY. + * Even if the parent blob is writable, we don't + * want the user of the sub-blob to be able to + * modify the parent data as that data may be + * shared among multiple sub-blobs. + */ +HB_EXTERN hb_blob_t * +hb_blob_create_sub_blob (hb_blob_t *parent, + unsigned int offset, + unsigned int length); + +HB_EXTERN hb_blob_t * +hb_blob_copy_writable_or_fail (hb_blob_t *blob); + +HB_EXTERN hb_blob_t * +hb_blob_get_empty (void); + +HB_EXTERN hb_blob_t * +hb_blob_reference (hb_blob_t *blob); + +HB_EXTERN void +hb_blob_destroy (hb_blob_t *blob); + +HB_EXTERN hb_bool_t +hb_blob_set_user_data (hb_blob_t *blob, + hb_user_data_key_t *key, + void * data, + hb_destroy_func_t destroy, + hb_bool_t replace); + + +HB_EXTERN void * +hb_blob_get_user_data (const hb_blob_t *blob, + hb_user_data_key_t *key); + + +HB_EXTERN void +hb_blob_make_immutable (hb_blob_t *blob); + +HB_EXTERN hb_bool_t +hb_blob_is_immutable (hb_blob_t *blob); + + +HB_EXTERN unsigned int +hb_blob_get_length (hb_blob_t *blob); + +HB_EXTERN const char * +hb_blob_get_data (hb_blob_t *blob, unsigned int *length); + +HB_EXTERN char * +hb_blob_get_data_writable (hb_blob_t *blob, unsigned int *length); + +HB_END_DECLS + +#endif /* HB_BLOB_H */ diff --git a/dependencies/linux64/include/harfbuzz/hb-buffer.h b/dependencies/linux64/include/harfbuzz/hb-buffer.h new file mode 100644 index 0000000..705b767 --- /dev/null +++ b/dependencies/linux64/include/harfbuzz/hb-buffer.h @@ -0,0 +1,871 @@ +/* + * Copyright © 1998-2004 David Turner and Werner Lemberg + * Copyright © 2004,2007,2009 Red Hat, Inc. + * Copyright © 2011,2012 Google, Inc. + * + * This is part of HarfBuzz, a text shaping library. + * + * Permission is hereby granted, without written agreement and without + * license or royalty fees, to use, copy, modify, and distribute this + * software and its documentation for any purpose, provided that the + * above copyright notice and the following two paragraphs appear in + * all copies of this software. + * + * IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE TO ANY PARTY FOR + * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES + * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN + * IF THE COPYRIGHT HOLDER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + * THE COPYRIGHT HOLDER SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, + * BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND + * FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS + * ON AN "AS IS" BASIS, AND THE COPYRIGHT HOLDER HAS NO OBLIGATION TO + * PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. + * + * Red Hat Author(s): Owen Taylor, Behdad Esfahbod + * Google Author(s): Behdad Esfahbod + */ + +#if !defined(HB_H_IN) && !defined(HB_NO_SINGLE_HEADER_ERROR) +#error "Include instead." +#endif + +#ifndef HB_BUFFER_H +#define HB_BUFFER_H + +#include "hb-common.h" +#include "hb-unicode.h" +#include "hb-font.h" + +HB_BEGIN_DECLS + +/** + * hb_glyph_info_t: + * @codepoint: either a Unicode code point (before shaping) or a glyph index + * (after shaping). + * @cluster: the index of the character in the original text that corresponds + * to this #hb_glyph_info_t, or whatever the client passes to + * hb_buffer_add(). More than one #hb_glyph_info_t can have the same + * @cluster value, if they resulted from the same character (e.g. one + * to many glyph substitution), and when more than one character gets + * merged in the same glyph (e.g. many to one glyph substitution) the + * #hb_glyph_info_t will have the smallest cluster value of them. + * By default some characters are merged into the same cluster + * (e.g. combining marks have the same cluster as their bases) + * even if they are separate glyphs, hb_buffer_set_cluster_level() + * allow selecting more fine-grained cluster handling. + * + * The #hb_glyph_info_t is the structure that holds information about the + * glyphs and their relation to input text. + */ +typedef struct hb_glyph_info_t { + hb_codepoint_t codepoint; + /*< private >*/ + hb_mask_t mask; + /*< public >*/ + uint32_t cluster; + + /*< private >*/ + hb_var_int_t var1; + hb_var_int_t var2; +} hb_glyph_info_t; + +/** + * hb_glyph_flags_t: + * @HB_GLYPH_FLAG_UNSAFE_TO_BREAK: Indicates that if input text is broken at the + * beginning of the cluster this glyph is part of, + * then both sides need to be re-shaped, as the + * result might be different. + * On the flip side, it means that when this + * flag is not present, then it is safe to break + * the glyph-run at the beginning of this + * cluster, and the two sides will represent the + * exact same result one would get if breaking + * input text at the beginning of this cluster + * and shaping the two sides separately. + * This can be used to optimize paragraph + * layout, by avoiding re-shaping of each line + * after line-breaking. + * @HB_GLYPH_FLAG_UNSAFE_TO_CONCAT: Indicates that if input text is changed on one + * side of the beginning of the cluster this glyph + * is part of, then the shaping results for the + * other side might change. + * Note that the absence of this flag will NOT by + * itself mean that it IS safe to concat text. + * Only two pieces of text both of which clear of + * this flag can be concatenated safely. + * This can be used to optimize paragraph + * layout, by avoiding re-shaping of each line + * after line-breaking, by limiting the + * reshaping to a small piece around the + * breaking position only, even if the breaking + * position carries the + * #HB_GLYPH_FLAG_UNSAFE_TO_BREAK or when + * hyphenation or other text transformation + * happens at line-break position, in the following + * way: + * 1. Iterate back from the line-break position + * until the first cluster start position that is + * NOT unsafe-to-concat, 2. shape the segment from + * there till the end of line, 3. check whether the + * resulting glyph-run also is clear of the + * unsafe-to-concat at its start-of-text position; + * if it is, just splice it into place and the line + * is shaped; If not, move on to a position further + * back that is clear of unsafe-to-concat and retry + * from there, and repeat. + * At the start of next line a similar algorithm can + * be implemented. That is: 1. Iterate forward from + * the line-break position until the first cluster + * start position that is NOT unsafe-to-concat, 2. + * shape the segment from beginning of the line to + * that position, 3. check whether the resulting + * glyph-run also is clear of the unsafe-to-concat + * at its end-of-text position; if it is, just splice + * it into place and the beginning is shaped; If not, + * move on to a position further forward that is clear + * of unsafe-to-concat and retry up to there, and repeat. + * A slight complication will arise in the + * implementation of the algorithm above, + * because while our buffer API has a way to + * return flags for position corresponding to + * start-of-text, there is currently no position + * corresponding to end-of-text. This limitation + * can be alleviated by shaping more text than needed + * and looking for unsafe-to-concat flag within text + * clusters. + * The #HB_GLYPH_FLAG_UNSAFE_TO_BREAK flag will + * always imply this flag. + * To use this flag, you must enable the buffer flag + * @HB_BUFFER_FLAG_PRODUCE_UNSAFE_TO_CONCAT during + * shaping, otherwise the buffer flag will not be + * reliably produced. + * Since: 4.0.0 + * @HB_GLYPH_FLAG_SAFE_TO_INSERT_TATWEEL: In scripts that use elongation (Arabic, + Mongolian, Syriac, etc.), this flag signifies + that it is safe to insert a U+0640 TATWEEL + character before this cluster for elongation. + This flag does not determine the + script-specific elongation places, but only + when it is safe to do the elongation without + interrupting text shaping. + Since: 5.1.0 + * @HB_GLYPH_FLAG_DEFINED: All the currently defined flags. + * + * Flags for #hb_glyph_info_t. + * + * Since: 1.5.0 + */ +typedef enum { /*< flags >*/ + HB_GLYPH_FLAG_UNSAFE_TO_BREAK = 0x00000001, + HB_GLYPH_FLAG_UNSAFE_TO_CONCAT = 0x00000002, + HB_GLYPH_FLAG_SAFE_TO_INSERT_TATWEEL = 0x00000004, + + HB_GLYPH_FLAG_DEFINED = 0x00000007 /* OR of all defined flags */ +} hb_glyph_flags_t; + +HB_EXTERN hb_glyph_flags_t +hb_glyph_info_get_glyph_flags (const hb_glyph_info_t *info); + +#define hb_glyph_info_get_glyph_flags(info) \ + ((hb_glyph_flags_t) ((unsigned int) (info)->mask & HB_GLYPH_FLAG_DEFINED)) + + +/** + * hb_glyph_position_t: + * @x_advance: how much the line advances after drawing this glyph when setting + * text in horizontal direction. + * @y_advance: how much the line advances after drawing this glyph when setting + * text in vertical direction. + * @x_offset: how much the glyph moves on the X-axis before drawing it, this + * should not affect how much the line advances. + * @y_offset: how much the glyph moves on the Y-axis before drawing it, this + * should not affect how much the line advances. + * + * The #hb_glyph_position_t is the structure that holds the positions of the + * glyph in both horizontal and vertical directions. All positions in + * #hb_glyph_position_t are relative to the current point. + * + */ +typedef struct hb_glyph_position_t { + hb_position_t x_advance; + hb_position_t y_advance; + hb_position_t x_offset; + hb_position_t y_offset; + + /*< private >*/ + hb_var_int_t var; +} hb_glyph_position_t; + +/** + * hb_segment_properties_t: + * @direction: the #hb_direction_t of the buffer, see hb_buffer_set_direction(). + * @script: the #hb_script_t of the buffer, see hb_buffer_set_script(). + * @language: the #hb_language_t of the buffer, see hb_buffer_set_language(). + * + * The structure that holds various text properties of an #hb_buffer_t. Can be + * set and retrieved using hb_buffer_set_segment_properties() and + * hb_buffer_get_segment_properties(), respectively. + */ +typedef struct hb_segment_properties_t { + hb_direction_t direction; + hb_script_t script; + hb_language_t language; + /*< private >*/ + void *reserved1; + void *reserved2; +} hb_segment_properties_t; + +/** + * HB_SEGMENT_PROPERTIES_DEFAULT: + * + * The default #hb_segment_properties_t of of freshly created #hb_buffer_t. + */ +#define HB_SEGMENT_PROPERTIES_DEFAULT {HB_DIRECTION_INVALID, \ + HB_SCRIPT_INVALID, \ + HB_LANGUAGE_INVALID, \ + (void *) 0, \ + (void *) 0} + +HB_EXTERN hb_bool_t +hb_segment_properties_equal (const hb_segment_properties_t *a, + const hb_segment_properties_t *b); + +HB_EXTERN unsigned int +hb_segment_properties_hash (const hb_segment_properties_t *p); + +HB_EXTERN void +hb_segment_properties_overlay (hb_segment_properties_t *p, + const hb_segment_properties_t *src); + + +/** + * hb_buffer_t: + * + * The main structure holding the input text and its properties before shaping, + * and output glyphs and their information after shaping. + */ + +typedef struct hb_buffer_t hb_buffer_t; + +HB_EXTERN hb_buffer_t * +hb_buffer_create (void); + +HB_EXTERN hb_buffer_t * +hb_buffer_create_similar (const hb_buffer_t *src); + +HB_EXTERN void +hb_buffer_reset (hb_buffer_t *buffer); + + +HB_EXTERN hb_buffer_t * +hb_buffer_get_empty (void); + +HB_EXTERN hb_buffer_t * +hb_buffer_reference (hb_buffer_t *buffer); + +HB_EXTERN void +hb_buffer_destroy (hb_buffer_t *buffer); + +HB_EXTERN hb_bool_t +hb_buffer_set_user_data (hb_buffer_t *buffer, + hb_user_data_key_t *key, + void * data, + hb_destroy_func_t destroy, + hb_bool_t replace); + +HB_EXTERN void * +hb_buffer_get_user_data (const hb_buffer_t *buffer, + hb_user_data_key_t *key); + + +/** + * hb_buffer_content_type_t: + * @HB_BUFFER_CONTENT_TYPE_INVALID: Initial value for new buffer. + * @HB_BUFFER_CONTENT_TYPE_UNICODE: The buffer contains input characters (before shaping). + * @HB_BUFFER_CONTENT_TYPE_GLYPHS: The buffer contains output glyphs (after shaping). + * + * The type of #hb_buffer_t contents. + */ +typedef enum { + HB_BUFFER_CONTENT_TYPE_INVALID = 0, + HB_BUFFER_CONTENT_TYPE_UNICODE, + HB_BUFFER_CONTENT_TYPE_GLYPHS +} hb_buffer_content_type_t; + +HB_EXTERN void +hb_buffer_set_content_type (hb_buffer_t *buffer, + hb_buffer_content_type_t content_type); + +HB_EXTERN hb_buffer_content_type_t +hb_buffer_get_content_type (const hb_buffer_t *buffer); + + +HB_EXTERN void +hb_buffer_set_unicode_funcs (hb_buffer_t *buffer, + hb_unicode_funcs_t *unicode_funcs); + +HB_EXTERN hb_unicode_funcs_t * +hb_buffer_get_unicode_funcs (const hb_buffer_t *buffer); + +HB_EXTERN void +hb_buffer_set_direction (hb_buffer_t *buffer, + hb_direction_t direction); + +HB_EXTERN hb_direction_t +hb_buffer_get_direction (const hb_buffer_t *buffer); + +HB_EXTERN void +hb_buffer_set_script (hb_buffer_t *buffer, + hb_script_t script); + +HB_EXTERN hb_script_t +hb_buffer_get_script (const hb_buffer_t *buffer); + +HB_EXTERN void +hb_buffer_set_language (hb_buffer_t *buffer, + hb_language_t language); + + +HB_EXTERN hb_language_t +hb_buffer_get_language (const hb_buffer_t *buffer); + +HB_EXTERN void +hb_buffer_set_segment_properties (hb_buffer_t *buffer, + const hb_segment_properties_t *props); + +HB_EXTERN void +hb_buffer_get_segment_properties (const hb_buffer_t *buffer, + hb_segment_properties_t *props); + +HB_EXTERN void +hb_buffer_guess_segment_properties (hb_buffer_t *buffer); + + +/** + * hb_buffer_flags_t: + * @HB_BUFFER_FLAG_DEFAULT: the default buffer flag. + * @HB_BUFFER_FLAG_BOT: flag indicating that special handling of the beginning + * of text paragraph can be applied to this buffer. Should usually + * be set, unless you are passing to the buffer only part + * of the text without the full context. + * @HB_BUFFER_FLAG_EOT: flag indicating that special handling of the end of text + * paragraph can be applied to this buffer, similar to + * @HB_BUFFER_FLAG_BOT. + * @HB_BUFFER_FLAG_PRESERVE_DEFAULT_IGNORABLES: + * flag indication that character with Default_Ignorable + * Unicode property should use the corresponding glyph + * from the font, instead of hiding them (done by + * replacing them with the space glyph and zeroing the + * advance width.) This flag takes precedence over + * @HB_BUFFER_FLAG_REMOVE_DEFAULT_IGNORABLES. + * @HB_BUFFER_FLAG_REMOVE_DEFAULT_IGNORABLES: + * flag indication that character with Default_Ignorable + * Unicode property should be removed from glyph string + * instead of hiding them (done by replacing them with the + * space glyph and zeroing the advance width.) + * @HB_BUFFER_FLAG_PRESERVE_DEFAULT_IGNORABLES takes + * precedence over this flag. Since: 1.8.0 + * @HB_BUFFER_FLAG_DO_NOT_INSERT_DOTTED_CIRCLE: + * flag indicating that a dotted circle should + * not be inserted in the rendering of incorrect + * character sequences (such at <0905 093E>). Since: 2.4.0 + * @HB_BUFFER_FLAG_VERIFY: + * flag indicating that the hb_shape() call and its variants + * should perform various verification processes on the results + * of the shaping operation on the buffer. If the verification + * fails, then either a buffer message is sent, if a message + * handler is installed on the buffer, or a message is written + * to standard error. In either case, the shaping result might + * be modified to show the failed output. Since: 3.4.0 + * @HB_BUFFER_FLAG_PRODUCE_UNSAFE_TO_CONCAT: + * flag indicating that the @HB_GLYPH_FLAG_UNSAFE_TO_CONCAT + * glyph-flag should be produced by the shaper. By default + * it will not be produced since it incurs a cost. Since: 4.0.0 + * @HB_BUFFER_FLAG_PRODUCE_SAFE_TO_INSERT_TATWEEL: + * flag indicating that the @HB_GLYPH_FLAG_SAFE_TO_INSERT_TATWEEL + * glyph-flag should be produced by the shaper. By default + * it will not be produced. Since: 5.1.0 + * @HB_BUFFER_FLAG_DEFINED: All currently defined flags: Since: 4.4.0 + * + * Flags for #hb_buffer_t. + * + * Since: 0.9.20 + */ +typedef enum { /*< flags >*/ + HB_BUFFER_FLAG_DEFAULT = 0x00000000u, + HB_BUFFER_FLAG_BOT = 0x00000001u, /* Beginning-of-text */ + HB_BUFFER_FLAG_EOT = 0x00000002u, /* End-of-text */ + HB_BUFFER_FLAG_PRESERVE_DEFAULT_IGNORABLES = 0x00000004u, + HB_BUFFER_FLAG_REMOVE_DEFAULT_IGNORABLES = 0x00000008u, + HB_BUFFER_FLAG_DO_NOT_INSERT_DOTTED_CIRCLE = 0x00000010u, + HB_BUFFER_FLAG_VERIFY = 0x00000020u, + HB_BUFFER_FLAG_PRODUCE_UNSAFE_TO_CONCAT = 0x00000040u, + HB_BUFFER_FLAG_PRODUCE_SAFE_TO_INSERT_TATWEEL = 0x00000080u, + + HB_BUFFER_FLAG_DEFINED = 0x000000FFu +} hb_buffer_flags_t; + +HB_EXTERN void +hb_buffer_set_flags (hb_buffer_t *buffer, + hb_buffer_flags_t flags); + +HB_EXTERN hb_buffer_flags_t +hb_buffer_get_flags (const hb_buffer_t *buffer); + +/** + * hb_buffer_cluster_level_t: + * @HB_BUFFER_CLUSTER_LEVEL_MONOTONE_GRAPHEMES: Return cluster values grouped by graphemes into + * monotone order. + * @HB_BUFFER_CLUSTER_LEVEL_MONOTONE_CHARACTERS: Return cluster values grouped into monotone order. + * @HB_BUFFER_CLUSTER_LEVEL_CHARACTERS: Don't group cluster values. + * @HB_BUFFER_CLUSTER_LEVEL_DEFAULT: Default cluster level, + * equal to @HB_BUFFER_CLUSTER_LEVEL_MONOTONE_GRAPHEMES. + * @HB_BUFFER_CLUSTER_LEVEL_GRAPHEMES: Only group clusters, but don't enforce monotone order. + * + * Data type for holding HarfBuzz's clustering behavior options. The cluster level + * dictates one aspect of how HarfBuzz will treat non-base characters + * during shaping. + * + * In @HB_BUFFER_CLUSTER_LEVEL_MONOTONE_GRAPHEMES, non-base + * characters are merged into the cluster of the base character that precedes them. + * There is also cluster merging every time the clusters will otherwise become non-monotone. + * + * In @HB_BUFFER_CLUSTER_LEVEL_MONOTONE_CHARACTERS, non-base characters are initially + * assigned their own cluster values, which are not merged into preceding base + * clusters. This allows HarfBuzz to perform additional operations like reorder + * sequences of adjacent marks. The output is still monotone, but the cluster + * values are more granular. + * + * In @HB_BUFFER_CLUSTER_LEVEL_CHARACTERS, non-base characters are assigned their + * own cluster values, which are not merged into preceding base clusters. Moreover, + * the cluster values are not merged into monotone order. This is the most granular + * cluster level, and it is useful for clients that need to know the exact cluster + * values of each character, but is harder to use for clients, since clusters + * might appear in any order. + * + * In @HB_BUFFER_CLUSTER_LEVEL_GRAPHEMES, non-base characters are merged into the + * cluster of the base character that precedes them. This is similar to the Unicode + * Grapheme Cluster algorithm, but it is not exactly the same. The output is + * not forced to be monotone. This is useful for clients that want to use HarfBuzz + * as a cheap implementation of the Unicode Grapheme Cluster algorithm. + * + * @HB_BUFFER_CLUSTER_LEVEL_MONOTONE_GRAPHEMES is the default, because it maintains + * backward compatibility with older versions of HarfBuzz. New client programs that + * do not need to maintain such backward compatibility are recommended to use + * @HB_BUFFER_CLUSTER_LEVEL_MONOTONE_CHARACTERS instead of the default. + * + * Since: 0.9.42 + */ +typedef enum { + HB_BUFFER_CLUSTER_LEVEL_MONOTONE_GRAPHEMES = 0, + HB_BUFFER_CLUSTER_LEVEL_MONOTONE_CHARACTERS = 1, + HB_BUFFER_CLUSTER_LEVEL_CHARACTERS = 2, + HB_BUFFER_CLUSTER_LEVEL_GRAPHEMES = 3, + HB_BUFFER_CLUSTER_LEVEL_DEFAULT = HB_BUFFER_CLUSTER_LEVEL_MONOTONE_GRAPHEMES +} hb_buffer_cluster_level_t; + +/** + * HB_BUFFER_CLUSTER_LEVEL_IS_MONOTONE: + * @level: #hb_buffer_cluster_level_t to test + * + * Tests whether a cluster level groups cluster values into monotone order. + * Requires that the level be valid. + * + * Since: 11.0.0 + */ +#define HB_BUFFER_CLUSTER_LEVEL_IS_MONOTONE(level) \ + ((bool) ((1u << (unsigned) (level)) & \ + ((1u << HB_BUFFER_CLUSTER_LEVEL_MONOTONE_GRAPHEMES) | \ + (1u << HB_BUFFER_CLUSTER_LEVEL_MONOTONE_CHARACTERS)))) + +/** + * HB_BUFFER_CLUSTER_LEVEL_IS_GRAPHEMES: + * @level: #hb_buffer_cluster_level_t to test + * + * Tests whether a cluster level groups cluster values by graphemes. Requires + * that the level be valid. + * + * Since: 11.0.0 + */ +#define HB_BUFFER_CLUSTER_LEVEL_IS_GRAPHEMES(level) \ + ((bool) ((1u << (unsigned) (level)) & \ + ((1u << HB_BUFFER_CLUSTER_LEVEL_MONOTONE_GRAPHEMES) | \ + (1u << HB_BUFFER_CLUSTER_LEVEL_GRAPHEMES)))) + +/** + * HB_BUFFER_CLUSTER_LEVEL_IS_CHARACTERS + * @level: #hb_buffer_cluster_level_t to test + * + * Tests whether a cluster level does not group cluster values by graphemes. + * Requires that the level be valid. + * + * Since: 11.0.0 + */ +#define HB_BUFFER_CLUSTER_LEVEL_IS_CHARACTERS(level) \ + ((bool) ((1u << (unsigned) (level)) & \ + ((1u << HB_BUFFER_CLUSTER_LEVEL_MONOTONE_CHARCATERS) | \ + (1u << HB_BUFFER_CLUSTER_LEVEL_CHARACTERS)))) + +HB_EXTERN void +hb_buffer_set_cluster_level (hb_buffer_t *buffer, + hb_buffer_cluster_level_t cluster_level); + +HB_EXTERN hb_buffer_cluster_level_t +hb_buffer_get_cluster_level (const hb_buffer_t *buffer); + +/** + * HB_BUFFER_REPLACEMENT_CODEPOINT_DEFAULT: + * + * The default code point for replacing invalid characters in a given encoding. + * Set to U+FFFD REPLACEMENT CHARACTER. + * + * Since: 0.9.31 + */ +#define HB_BUFFER_REPLACEMENT_CODEPOINT_DEFAULT 0xFFFDu + +HB_EXTERN void +hb_buffer_set_replacement_codepoint (hb_buffer_t *buffer, + hb_codepoint_t replacement); + +HB_EXTERN hb_codepoint_t +hb_buffer_get_replacement_codepoint (const hb_buffer_t *buffer); + +HB_EXTERN void +hb_buffer_set_invisible_glyph (hb_buffer_t *buffer, + hb_codepoint_t invisible); + +HB_EXTERN hb_codepoint_t +hb_buffer_get_invisible_glyph (const hb_buffer_t *buffer); + +HB_EXTERN void +hb_buffer_set_not_found_glyph (hb_buffer_t *buffer, + hb_codepoint_t not_found); + +HB_EXTERN hb_codepoint_t +hb_buffer_get_not_found_glyph (const hb_buffer_t *buffer); + +HB_EXTERN void +hb_buffer_set_not_found_variation_selector_glyph (hb_buffer_t *buffer, + hb_codepoint_t not_found_variation_selector); + +HB_EXTERN hb_codepoint_t +hb_buffer_get_not_found_variation_selector_glyph (const hb_buffer_t *buffer); + +HB_EXTERN void +hb_buffer_set_random_state (hb_buffer_t *buffer, + unsigned state); + +HB_EXTERN unsigned +hb_buffer_get_random_state (const hb_buffer_t *buffer); + +/* + * Content API. + */ + +HB_EXTERN void +hb_buffer_clear_contents (hb_buffer_t *buffer); + +HB_EXTERN hb_bool_t +hb_buffer_pre_allocate (hb_buffer_t *buffer, + unsigned int size); + + +HB_EXTERN hb_bool_t +hb_buffer_allocation_successful (hb_buffer_t *buffer); + +HB_EXTERN void +hb_buffer_reverse (hb_buffer_t *buffer); + +HB_EXTERN void +hb_buffer_reverse_range (hb_buffer_t *buffer, + unsigned int start, unsigned int end); + +HB_EXTERN void +hb_buffer_reverse_clusters (hb_buffer_t *buffer); + + +/* Filling the buffer in */ + +HB_EXTERN void +hb_buffer_add (hb_buffer_t *buffer, + hb_codepoint_t codepoint, + unsigned int cluster); + +HB_EXTERN void +hb_buffer_add_utf8 (hb_buffer_t *buffer, + const char *text, + int text_length, + unsigned int item_offset, + int item_length); + +HB_EXTERN void +hb_buffer_add_utf16 (hb_buffer_t *buffer, + const uint16_t *text, + int text_length, + unsigned int item_offset, + int item_length); + +HB_EXTERN void +hb_buffer_add_utf32 (hb_buffer_t *buffer, + const uint32_t *text, + int text_length, + unsigned int item_offset, + int item_length); + +HB_EXTERN void +hb_buffer_add_latin1 (hb_buffer_t *buffer, + const uint8_t *text, + int text_length, + unsigned int item_offset, + int item_length); + +HB_EXTERN void +hb_buffer_add_codepoints (hb_buffer_t *buffer, + const hb_codepoint_t *text, + int text_length, + unsigned int item_offset, + int item_length); + +HB_EXTERN void +hb_buffer_append (hb_buffer_t *buffer, + const hb_buffer_t *source, + unsigned int start, + unsigned int end); + +HB_EXTERN hb_bool_t +hb_buffer_set_length (hb_buffer_t *buffer, + unsigned int length); + +HB_EXTERN unsigned int +hb_buffer_get_length (const hb_buffer_t *buffer); + +/* Getting glyphs out of the buffer */ + +HB_EXTERN hb_glyph_info_t * +hb_buffer_get_glyph_infos (hb_buffer_t *buffer, + unsigned int *length); + +HB_EXTERN hb_glyph_position_t * +hb_buffer_get_glyph_positions (hb_buffer_t *buffer, + unsigned int *length); + +HB_EXTERN hb_bool_t +hb_buffer_has_positions (hb_buffer_t *buffer); + + +HB_EXTERN void +hb_buffer_normalize_glyphs (hb_buffer_t *buffer); + + +/* + * Serialize + */ + +/** + * hb_buffer_serialize_flags_t: + * @HB_BUFFER_SERIALIZE_FLAG_DEFAULT: serialize glyph names, clusters and positions. + * @HB_BUFFER_SERIALIZE_FLAG_NO_CLUSTERS: do not serialize glyph cluster. + * @HB_BUFFER_SERIALIZE_FLAG_NO_POSITIONS: do not serialize glyph position information. + * @HB_BUFFER_SERIALIZE_FLAG_NO_GLYPH_NAMES: do no serialize glyph name. + * @HB_BUFFER_SERIALIZE_FLAG_GLYPH_EXTENTS: serialize glyph extents. + * @HB_BUFFER_SERIALIZE_FLAG_GLYPH_FLAGS: serialize glyph flags. Since: 1.5.0 + * @HB_BUFFER_SERIALIZE_FLAG_NO_ADVANCES: do not serialize glyph advances, + * glyph offsets will reflect absolute glyph positions. Since: 1.8.0 + * @HB_BUFFER_SERIALIZE_FLAG_DEFINED: All currently defined flags. Since: 4.4.0 + * + * Flags that control what glyph information are serialized in hb_buffer_serialize_glyphs(). + * + * Since: 0.9.20 + */ +typedef enum { /*< flags >*/ + HB_BUFFER_SERIALIZE_FLAG_DEFAULT = 0x00000000u, + HB_BUFFER_SERIALIZE_FLAG_NO_CLUSTERS = 0x00000001u, + HB_BUFFER_SERIALIZE_FLAG_NO_POSITIONS = 0x00000002u, + HB_BUFFER_SERIALIZE_FLAG_NO_GLYPH_NAMES = 0x00000004u, + HB_BUFFER_SERIALIZE_FLAG_GLYPH_EXTENTS = 0x00000008u, + HB_BUFFER_SERIALIZE_FLAG_GLYPH_FLAGS = 0x00000010u, + HB_BUFFER_SERIALIZE_FLAG_NO_ADVANCES = 0x00000020u, + + HB_BUFFER_SERIALIZE_FLAG_DEFINED = 0x0000003Fu +} hb_buffer_serialize_flags_t; + +/** + * hb_buffer_serialize_format_t: + * @HB_BUFFER_SERIALIZE_FORMAT_TEXT: a human-readable, plain text format. + * @HB_BUFFER_SERIALIZE_FORMAT_JSON: a machine-readable JSON format. + * @HB_BUFFER_SERIALIZE_FORMAT_INVALID: invalid format. + * + * The buffer serialization and de-serialization format used in + * hb_buffer_serialize_glyphs() and hb_buffer_deserialize_glyphs(). + * + * Since: 0.9.2 + */ +typedef enum { + HB_BUFFER_SERIALIZE_FORMAT_TEXT = HB_TAG('T','E','X','T'), + HB_BUFFER_SERIALIZE_FORMAT_JSON = HB_TAG('J','S','O','N'), + HB_BUFFER_SERIALIZE_FORMAT_INVALID = HB_TAG_NONE +} hb_buffer_serialize_format_t; + +HB_EXTERN hb_buffer_serialize_format_t +hb_buffer_serialize_format_from_string (const char *str, int len); + +HB_EXTERN const char * +hb_buffer_serialize_format_to_string (hb_buffer_serialize_format_t format); + +HB_EXTERN const char ** +hb_buffer_serialize_list_formats (void); + +HB_EXTERN unsigned int +hb_buffer_serialize_glyphs (hb_buffer_t *buffer, + unsigned int start, + unsigned int end, + char *buf, + unsigned int buf_size, + unsigned int *buf_consumed, + hb_font_t *font, + hb_buffer_serialize_format_t format, + hb_buffer_serialize_flags_t flags); + +HB_EXTERN unsigned int +hb_buffer_serialize_unicode (hb_buffer_t *buffer, + unsigned int start, + unsigned int end, + char *buf, + unsigned int buf_size, + unsigned int *buf_consumed, + hb_buffer_serialize_format_t format, + hb_buffer_serialize_flags_t flags); + +HB_EXTERN unsigned int +hb_buffer_serialize (hb_buffer_t *buffer, + unsigned int start, + unsigned int end, + char *buf, + unsigned int buf_size, + unsigned int *buf_consumed, + hb_font_t *font, + hb_buffer_serialize_format_t format, + hb_buffer_serialize_flags_t flags); + +HB_EXTERN hb_bool_t +hb_buffer_deserialize_glyphs (hb_buffer_t *buffer, + const char *buf, + int buf_len, + const char **end_ptr, + hb_font_t *font, + hb_buffer_serialize_format_t format); + +HB_EXTERN hb_bool_t +hb_buffer_deserialize_unicode (hb_buffer_t *buffer, + const char *buf, + int buf_len, + const char **end_ptr, + hb_buffer_serialize_format_t format); + + + +/* + * Compare buffers + */ + +/** + * hb_buffer_diff_flags_t: + * @HB_BUFFER_DIFF_FLAG_EQUAL: equal buffers. + * @HB_BUFFER_DIFF_FLAG_CONTENT_TYPE_MISMATCH: buffers with different + * #hb_buffer_content_type_t. + * @HB_BUFFER_DIFF_FLAG_LENGTH_MISMATCH: buffers with differing length. + * @HB_BUFFER_DIFF_FLAG_NOTDEF_PRESENT: `.notdef` glyph is present in the + * reference buffer. + * @HB_BUFFER_DIFF_FLAG_DOTTED_CIRCLE_PRESENT: dotted circle glyph is present + * in the reference buffer. + * @HB_BUFFER_DIFF_FLAG_CODEPOINT_MISMATCH: difference in #hb_glyph_info_t.codepoint + * @HB_BUFFER_DIFF_FLAG_CLUSTER_MISMATCH: difference in #hb_glyph_info_t.cluster + * @HB_BUFFER_DIFF_FLAG_GLYPH_FLAGS_MISMATCH: difference in #hb_glyph_flags_t. + * @HB_BUFFER_DIFF_FLAG_POSITION_MISMATCH: difference in #hb_glyph_position_t. + * + * Flags from comparing two #hb_buffer_t's. + * + * Buffer with different #hb_buffer_content_type_t cannot be meaningfully + * compared in any further detail. + * + * For buffers with differing length, the per-glyph comparison is not + * attempted, though we do still scan reference buffer for dotted circle and + * `.notdef` glyphs. + * + * If the buffers have the same length, we compare them glyph-by-glyph and + * report which aspect(s) of the glyph info/position are different. + * + * Since: 1.5.0 + */ +typedef enum { /*< flags >*/ + HB_BUFFER_DIFF_FLAG_EQUAL = 0x0000, + + /* Buffers with different content_type cannot be meaningfully compared + * in any further detail. */ + HB_BUFFER_DIFF_FLAG_CONTENT_TYPE_MISMATCH = 0x0001, + + /* For buffers with differing length, the per-glyph comparison is not + * attempted, though we do still scan reference for dottedcircle / .notdef + * glyphs. */ + HB_BUFFER_DIFF_FLAG_LENGTH_MISMATCH = 0x0002, + + /* We want to know if dottedcircle / .notdef glyphs are present in the + * reference, as we may not care so much about other differences in this + * case. */ + HB_BUFFER_DIFF_FLAG_NOTDEF_PRESENT = 0x0004, + HB_BUFFER_DIFF_FLAG_DOTTED_CIRCLE_PRESENT = 0x0008, + + /* If the buffers have the same length, we compare them glyph-by-glyph + * and report which aspect(s) of the glyph info/position are different. */ + HB_BUFFER_DIFF_FLAG_CODEPOINT_MISMATCH = 0x0010, + HB_BUFFER_DIFF_FLAG_CLUSTER_MISMATCH = 0x0020, + HB_BUFFER_DIFF_FLAG_GLYPH_FLAGS_MISMATCH = 0x0040, + HB_BUFFER_DIFF_FLAG_POSITION_MISMATCH = 0x0080 + +} hb_buffer_diff_flags_t; + +/* Compare the contents of two buffers, report types of differences. */ +HB_EXTERN hb_buffer_diff_flags_t +hb_buffer_diff (hb_buffer_t *buffer, + hb_buffer_t *reference, + hb_codepoint_t dottedcircle_glyph, + unsigned int position_fuzz); + + +/* + * Tracing. + */ + +/** + * hb_buffer_message_func_t: + * @buffer: An #hb_buffer_t to work upon + * @font: The #hb_font_t the @buffer is shaped with + * @message: `NULL`-terminated message passed to the function + * @user_data: User data pointer passed by the caller + * + * A callback method for #hb_buffer_t. The method gets called with the + * #hb_buffer_t it was set on, the #hb_font_t the buffer is shaped with and a + * message describing what step of the shaping process will be performed. + * Returning `false` from this method will skip this shaping step and move to + * the next one. + * + * Return value: `true` to perform the shaping step, `false` to skip it. + * + * Since: 1.1.3 + */ +typedef hb_bool_t (*hb_buffer_message_func_t) (hb_buffer_t *buffer, + hb_font_t *font, + const char *message, + void *user_data); + +HB_EXTERN void +hb_buffer_set_message_func (hb_buffer_t *buffer, + hb_buffer_message_func_t func, + void *user_data, hb_destroy_func_t destroy); + + +HB_END_DECLS + +#endif /* HB_BUFFER_H */ diff --git a/dependencies/linux64/include/harfbuzz/hb-common.h b/dependencies/linux64/include/harfbuzz/hb-common.h new file mode 100644 index 0000000..49d4294 --- /dev/null +++ b/dependencies/linux64/include/harfbuzz/hb-common.h @@ -0,0 +1,534 @@ +/* + * Copyright © 2007,2008,2009 Red Hat, Inc. + * Copyright © 2011,2012 Google, Inc. + * + * This is part of HarfBuzz, a text shaping library. + * + * Permission is hereby granted, without written agreement and without + * license or royalty fees, to use, copy, modify, and distribute this + * software and its documentation for any purpose, provided that the + * above copyright notice and the following two paragraphs appear in + * all copies of this software. + * + * IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE TO ANY PARTY FOR + * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES + * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN + * IF THE COPYRIGHT HOLDER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + * THE COPYRIGHT HOLDER SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, + * BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND + * FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS + * ON AN "AS IS" BASIS, AND THE COPYRIGHT HOLDER HAS NO OBLIGATION TO + * PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. + * + * Red Hat Author(s): Behdad Esfahbod + * Google Author(s): Behdad Esfahbod + */ + +#if !defined(HB_H_IN) && !defined(HB_NO_SINGLE_HEADER_ERROR) +#error "Include instead." +#endif + +#ifndef HB_COMMON_H +#define HB_COMMON_H + +#ifndef HB_EXTERN +#define HB_EXTERN extern +#endif + +#ifndef HB_BEGIN_DECLS +# ifdef __cplusplus +# define HB_BEGIN_DECLS extern "C" { +# define HB_END_DECLS } +# else /* !__cplusplus */ +# define HB_BEGIN_DECLS +# define HB_END_DECLS +# endif /* !__cplusplus */ +#endif + +#if defined (_AIX) +# include +#elif defined (_MSC_VER) && _MSC_VER < 1600 +/* VS 2010 (_MSC_VER 1600) has stdint.h */ +typedef __int8 int8_t; +typedef unsigned __int8 uint8_t; +typedef __int16 int16_t; +typedef unsigned __int16 uint16_t; +typedef __int32 int32_t; +typedef unsigned __int32 uint32_t; +typedef __int64 int64_t; +typedef unsigned __int64 uint64_t; +#elif defined (_MSC_VER) && _MSC_VER < 1800 +/* VS 2013 (_MSC_VER 1800) has inttypes.h */ +# include +#else +# include +#endif +#include + +#if defined(__GNUC__) && ((__GNUC__ > 3) || (__GNUC__ == 3 && __GNUC_MINOR__ >= 1)) +#define HB_DEPRECATED __attribute__((__deprecated__)) +#elif defined(_MSC_VER) && (_MSC_VER >= 1300) +#define HB_DEPRECATED __declspec(deprecated) +#else +#define HB_DEPRECATED +#endif + +#if defined(__GNUC__) && ((__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 5)) +#define HB_DEPRECATED_FOR(f) __attribute__((__deprecated__("Use '" #f "' instead"))) +#elif defined(_MSC_FULL_VER) && (_MSC_FULL_VER > 140050320) +#define HB_DEPRECATED_FOR(f) __declspec(deprecated("is deprecated. Use '" #f "' instead")) +#else +#define HB_DEPRECATED_FOR(f) HB_DEPRECATED +#endif + + +HB_BEGIN_DECLS + +/** + * hb_bool_t: + * + * Data type for booleans. + * + **/ +typedef int hb_bool_t; + +/** + * hb_codepoint_t: + * + * Data type for holding Unicode codepoints. Also + * used to hold glyph IDs. + * + **/ +typedef uint32_t hb_codepoint_t; + +/** + * HB_CODEPOINT_INVALID: + * + * Unused #hb_codepoint_t value. + * + * Since: 8.0.0 + */ +#define HB_CODEPOINT_INVALID ((hb_codepoint_t) -1) + +/** + * hb_position_t: + * + * Data type for holding a single coordinate value. + * Contour points and other multi-dimensional data are + * stored as tuples of #hb_position_t's. + * + **/ +typedef int32_t hb_position_t; +/** + * hb_mask_t: + * + * Data type for bitmasks. + * + **/ +typedef uint32_t hb_mask_t; + +typedef union _hb_var_int_t { + uint32_t u32; + int32_t i32; + uint16_t u16[2]; + int16_t i16[2]; + uint8_t u8[4]; + int8_t i8[4]; +} hb_var_int_t; + +typedef union _hb_var_num_t { + float f; + uint32_t u32; + int32_t i32; + uint16_t u16[2]; + int16_t i16[2]; + uint8_t u8[4]; + int8_t i8[4]; +} hb_var_num_t; + + +/* hb_tag_t */ + +/** + * hb_tag_t: + * + * Data type for tag identifiers. Tags are four + * byte integers, each byte representing a character. + * + * Tags are used to identify tables, design-variation axes, + * scripts, languages, font features, and baselines with + * human-readable names. + * + **/ +typedef uint32_t hb_tag_t; + +/** + * HB_TAG: + * @c1: 1st character of the tag + * @c2: 2nd character of the tag + * @c3: 3rd character of the tag + * @c4: 4th character of the tag + * + * Constructs an #hb_tag_t from four character literals. + * + **/ +#define HB_TAG(c1,c2,c3,c4) ((hb_tag_t)((((uint32_t)(c1)&0xFF)<<24)|(((uint32_t)(c2)&0xFF)<<16)|(((uint32_t)(c3)&0xFF)<<8)|((uint32_t)(c4)&0xFF))) + +/** + * HB_UNTAG: + * @tag: an #hb_tag_t + * + * Extracts four character literals from an #hb_tag_t. + * + * Since: 0.6.0 + * + **/ +#define HB_UNTAG(tag) (uint8_t)(((tag)>>24)&0xFF), (uint8_t)(((tag)>>16)&0xFF), (uint8_t)(((tag)>>8)&0xFF), (uint8_t)((tag)&0xFF) + +/** + * HB_TAG_NONE: + * + * Unset #hb_tag_t. + */ +#define HB_TAG_NONE HB_TAG(0,0,0,0) +/** + * HB_TAG_MAX: + * + * Maximum possible unsigned #hb_tag_t. + * + * Since: 0.9.26 + */ +#define HB_TAG_MAX HB_TAG(0xff,0xff,0xff,0xff) +/** + * HB_TAG_MAX_SIGNED: + * + * Maximum possible signed #hb_tag_t. + * + * Since: 0.9.33 + */ +#define HB_TAG_MAX_SIGNED HB_TAG(0x7f,0xff,0xff,0xff) + +/* len=-1 means str is NUL-terminated. */ +HB_EXTERN hb_tag_t +hb_tag_from_string (const char *str, int len); + +/* buf should have 4 bytes. */ +HB_EXTERN void +hb_tag_to_string (hb_tag_t tag, char *buf); + + +/** + * hb_direction_t: + * @HB_DIRECTION_INVALID: Initial, unset direction. + * @HB_DIRECTION_LTR: Text is set horizontally from left to right. + * @HB_DIRECTION_RTL: Text is set horizontally from right to left. + * @HB_DIRECTION_TTB: Text is set vertically from top to bottom. + * @HB_DIRECTION_BTT: Text is set vertically from bottom to top. + * + * The direction of a text segment or buffer. + * + * A segment can also be tested for horizontal or vertical + * orientation (irrespective of specific direction) with + * HB_DIRECTION_IS_HORIZONTAL() or HB_DIRECTION_IS_VERTICAL(). + * + */ +typedef enum { + HB_DIRECTION_INVALID = 0, + HB_DIRECTION_LTR = 4, + HB_DIRECTION_RTL, + HB_DIRECTION_TTB, + HB_DIRECTION_BTT +} hb_direction_t; + +/* len=-1 means str is NUL-terminated */ +HB_EXTERN hb_direction_t +hb_direction_from_string (const char *str, int len); + +HB_EXTERN const char * +hb_direction_to_string (hb_direction_t direction); + +/** + * HB_DIRECTION_IS_VALID: + * @dir: #hb_direction_t to test + * + * Tests whether a text direction is valid. + * + **/ +#define HB_DIRECTION_IS_VALID(dir) ((((unsigned int) (dir)) & ~3U) == 4) +/* Direction must be valid for the following */ +/** + * HB_DIRECTION_IS_HORIZONTAL: + * @dir: #hb_direction_t to test + * + * Tests whether a text direction is horizontal. Requires + * that the direction be valid. + * + **/ +#define HB_DIRECTION_IS_HORIZONTAL(dir) ((((unsigned int) (dir)) & ~1U) == 4) +/** + * HB_DIRECTION_IS_VERTICAL: + * @dir: #hb_direction_t to test + * + * Tests whether a text direction is vertical. Requires + * that the direction be valid. + * + **/ +#define HB_DIRECTION_IS_VERTICAL(dir) ((((unsigned int) (dir)) & ~1U) == 6) +/** + * HB_DIRECTION_IS_FORWARD: + * @dir: #hb_direction_t to test + * + * Tests whether a text direction moves forward (from left to right, or from + * top to bottom). Requires that the direction be valid. + * + **/ +#define HB_DIRECTION_IS_FORWARD(dir) ((((unsigned int) (dir)) & ~2U) == 4) +/** + * HB_DIRECTION_IS_BACKWARD: + * @dir: #hb_direction_t to test + * + * Tests whether a text direction moves backward (from right to left, or from + * bottom to top). Requires that the direction be valid. + * + **/ +#define HB_DIRECTION_IS_BACKWARD(dir) ((((unsigned int) (dir)) & ~2U) == 5) +/** + * HB_DIRECTION_REVERSE: + * @dir: #hb_direction_t to reverse + * + * Reverses a text direction. Requires that the direction + * be valid. + * + **/ +#define HB_DIRECTION_REVERSE(dir) ((hb_direction_t) (((unsigned int) (dir)) ^ 1)) + + +/* hb_language_t */ + +/** + * hb_language_t: + * + * Data type for languages. Each #hb_language_t corresponds to a BCP 47 + * language tag. + * + */ +typedef const struct hb_language_impl_t *hb_language_t; + +HB_EXTERN hb_language_t +hb_language_from_string (const char *str, int len); + +HB_EXTERN const char * +hb_language_to_string (hb_language_t language); + +/** + * HB_LANGUAGE_INVALID: + * + * An unset #hb_language_t. + * + * Since: 0.6.0 + */ +#define HB_LANGUAGE_INVALID ((hb_language_t) 0) + +HB_EXTERN hb_language_t +hb_language_get_default (void); + +HB_EXTERN hb_bool_t +hb_language_matches (hb_language_t language, + hb_language_t specific); + +#include "hb-script-list.h" + +/* Script functions */ + +HB_EXTERN hb_script_t +hb_script_from_iso15924_tag (hb_tag_t tag); + +HB_EXTERN hb_script_t +hb_script_from_string (const char *str, int len); + +HB_EXTERN hb_tag_t +hb_script_to_iso15924_tag (hb_script_t script); + +HB_EXTERN hb_direction_t +hb_script_get_horizontal_direction (hb_script_t script); + + +/* User data */ + +/** + * hb_user_data_key_t: + * + * Data structure for holding user-data keys. + * + **/ +typedef struct hb_user_data_key_t { + /*< private >*/ + char unused; +} hb_user_data_key_t; + +/** + * hb_destroy_func_t: + * @user_data: the data to be destroyed + * + * A virtual method for destroy user-data callbacks. + * + */ +typedef void (*hb_destroy_func_t) (void *user_data); + + +/* Font features and variations. */ + +/** + * HB_FEATURE_GLOBAL_START: + * + * Special setting for #hb_feature_t.start to apply the feature from the start + * of the buffer. + * + * Since: 2.0.0 + */ +#define HB_FEATURE_GLOBAL_START 0 + +/** + * HB_FEATURE_GLOBAL_END: + * + * Special setting for #hb_feature_t.end to apply the feature from to the end + * of the buffer. + * + * Since: 2.0.0 + */ +#define HB_FEATURE_GLOBAL_END ((unsigned int) -1) + +/** + * hb_feature_t: + * @tag: The #hb_tag_t tag of the feature + * @value: The value of the feature. 0 disables the feature, non-zero (usually + * 1) enables the feature. For features implemented as lookup type 3 (like + * 'salt') the @value is a one based index into the alternates. + * @start: the cluster to start applying this feature setting (inclusive). + * @end: the cluster to end applying this feature setting (exclusive). + * + * The #hb_feature_t is the structure that holds information about requested + * feature application. The feature will be applied with the given value to all + * glyphs which are in clusters between @start (inclusive) and @end (exclusive). + * Setting start to #HB_FEATURE_GLOBAL_START and end to #HB_FEATURE_GLOBAL_END + * specifies that the feature always applies to the entire buffer. + */ +typedef struct hb_feature_t { + hb_tag_t tag; + uint32_t value; + unsigned int start; + unsigned int end; +} hb_feature_t; + +HB_EXTERN hb_bool_t +hb_feature_from_string (const char *str, int len, + hb_feature_t *feature); + +HB_EXTERN void +hb_feature_to_string (hb_feature_t *feature, + char *buf, unsigned int size); + +/** + * hb_variation_t: + * @tag: The #hb_tag_t tag of the variation-axis name + * @value: The value of the variation axis + * + * Data type for holding variation data. Registered OpenType + * variation-axis tags are listed in + * [OpenType Axis Tag Registry](https://docs.microsoft.com/en-us/typography/opentype/spec/dvaraxisreg). + * + * Since: 1.4.2 + */ +typedef struct hb_variation_t { + hb_tag_t tag; + float value; +} hb_variation_t; + +HB_EXTERN hb_bool_t +hb_variation_from_string (const char *str, int len, + hb_variation_t *variation); + +HB_EXTERN void +hb_variation_to_string (hb_variation_t *variation, + char *buf, unsigned int size); + +/** + * hb_color_t: + * + * Data type for holding color values. Colors are eight bits per + * channel RGB plus alpha transparency. + * + * Since: 2.1.0 + */ +typedef uint32_t hb_color_t; + +/** + * HB_COLOR: + * @b: blue channel value + * @g: green channel value + * @r: red channel value + * @a: alpha channel value + * + * Constructs an #hb_color_t from four integers. + * + * Since: 2.1.0 + */ +#define HB_COLOR(b,g,r,a) ((hb_color_t) HB_TAG ((b),(g),(r),(a))) + +HB_EXTERN uint8_t +hb_color_get_alpha (hb_color_t color); +#define hb_color_get_alpha(color) ((color) & 0xFF) + +HB_EXTERN uint8_t +hb_color_get_red (hb_color_t color); +#define hb_color_get_red(color) (((color) >> 8) & 0xFF) + +HB_EXTERN uint8_t +hb_color_get_green (hb_color_t color); +#define hb_color_get_green(color) (((color) >> 16) & 0xFF) + +HB_EXTERN uint8_t +hb_color_get_blue (hb_color_t color); +#define hb_color_get_blue(color) (((color) >> 24) & 0xFF) + +/** + * hb_glyph_extents_t: + * @x_bearing: Distance from the x-origin to the left extremum of the glyph. + * @y_bearing: Distance from the top extremum of the glyph to the y-origin. + * @width: Distance from the left extremum of the glyph to the right extremum. + * @height: Distance from the top extremum of the glyph to the bottom extremum. + * + * Glyph extent values, measured in font units. + * + * Note that @height is negative, in coordinate systems that grow up. + **/ +typedef struct hb_glyph_extents_t { + hb_position_t x_bearing; + hb_position_t y_bearing; + hb_position_t width; + hb_position_t height; +} hb_glyph_extents_t; + +/** + * hb_font_t: + * + * Data type for holding fonts. + * + */ +typedef struct hb_font_t hb_font_t; + +/* Not of much use to clients. */ +HB_EXTERN void* +hb_malloc (size_t size); +HB_EXTERN void* +hb_calloc (size_t nmemb, size_t size); +HB_EXTERN void* +hb_realloc (void *ptr, size_t size); +HB_EXTERN void +hb_free (void *ptr); + +HB_END_DECLS + +#endif /* HB_COMMON_H */ diff --git a/dependencies/linux64/include/harfbuzz/hb-cplusplus.hh b/dependencies/linux64/include/harfbuzz/hb-cplusplus.hh new file mode 100644 index 0000000..b6b5c8f --- /dev/null +++ b/dependencies/linux64/include/harfbuzz/hb-cplusplus.hh @@ -0,0 +1,220 @@ +/* + * Copyright © 2022 Behdad Esfahbod + * + * This is part of HarfBuzz, a text shaping library. + * + * Permission is hereby granted, without written agreement and without + * license or royalty fees, to use, copy, modify, and distribute this + * software and its documentation for any purpose, provided that the + * above copyright notice and the following two paragraphs appear in + * all copies of this software. + * + * IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE TO ANY PARTY FOR + * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES + * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN + * IF THE COPYRIGHT HOLDER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + * THE COPYRIGHT HOLDER SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, + * BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND + * FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS + * ON AN "AS IS" BASIS, AND THE COPYRIGHT HOLDER HAS NO OBLIGATION TO + * PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. + */ + +#ifndef HB_CPLUSPLUS_HH +#define HB_CPLUSPLUS_HH + +#include "hb.h" + +#ifdef __cplusplus + +#include +#include + +#if 0 +#if !(__cplusplus >= 201103L) +#error "HarfBuzz C++ helpers require C++11" +#endif +#endif + +namespace hb { + + +template +struct vtable; + +template +struct shared_ptr +{ + using element_type = T; + + using v = vtable; + + explicit shared_ptr (T *p = nullptr) : p (p) {} + shared_ptr (const shared_ptr &o) : p (v::reference (o.p)) {} + shared_ptr (shared_ptr &&o) noexcept : p (o.p) { o.p = nullptr; } + shared_ptr& operator = (const shared_ptr &o) { if (p != o.p) { destroy (); p = o.p; reference (); } return *this; } + shared_ptr& operator = (shared_ptr &&o) noexcept { v::destroy (p); p = o.p; o.p = nullptr; return *this; } + ~shared_ptr () { v::destroy (p); p = nullptr; } + + T* get() const { return p; } + + void swap (shared_ptr &o) noexcept { std::swap (p, o.p); } + friend void swap (shared_ptr &a, shared_ptr &b) noexcept { std::swap (a.p, b.p); } + + operator T * () const { return p; } + T& operator * () const { return *get (); } + T* operator -> () const { return get (); } + operator bool () const { return p; } + bool operator == (const shared_ptr &o) const { return p == o.p; } + bool operator != (const shared_ptr &o) const { return p != o.p; } + + static T* get_empty() { return v::get_empty (); } + T* reference() { return v::reference (p); } + void destroy() { v::destroy (p); } + void set_user_data (hb_user_data_key_t *key, + void *value, + hb_destroy_func_t destroy, + hb_bool_t replace) { v::set_user_data (p, key, value, destroy, replace); } + void * get_user_data (hb_user_data_key_t *key) { return v::get_user_data (p, key); } + + private: + T *p; +}; + +template struct is_shared_ptr : std::false_type {}; +template struct is_shared_ptr> : std::true_type {}; + +template +struct unique_ptr +{ + using element_type = T; + + using v = vtable; + + explicit unique_ptr (T *p = nullptr) : p (p) {} + unique_ptr (const unique_ptr &o) = delete; + unique_ptr (unique_ptr &&o) noexcept : p (o.p) { o.p = nullptr; } + unique_ptr& operator = (const unique_ptr &o) = delete; + unique_ptr& operator = (unique_ptr &&o) noexcept { v::destroy (p); p = o.p; o.p = nullptr; return *this; } + ~unique_ptr () { v::destroy (p); p = nullptr; } + + T* get() const { return p; } + T* release () { T* v = p; p = nullptr; return v; } + + void swap (unique_ptr &o) noexcept { std::swap (p, o.p); } + friend void swap (unique_ptr &a, unique_ptr &b) noexcept { std::swap (a.p, b.p); } + + operator T * () const { return p; } + T& operator * () const { return *get (); } + T* operator -> () const { return get (); } + operator bool () { return p; } + + private: + T *p; +}; + +template struct is_unique_ptr : std::false_type {}; +template struct is_unique_ptr> : std::true_type {}; + +template +struct vtable_t +{ + static constexpr auto get_empty = _get_empty; + static constexpr auto reference = _reference; + static constexpr auto destroy = _destroy; + static constexpr auto set_user_data = _set_user_data; + static constexpr auto get_user_data = _get_user_data; +}; + +#define HB_DEFINE_VTABLE(name) \ + template<> \ + struct vtable \ + : vtable_t {} + +HB_DEFINE_VTABLE (buffer); +HB_DEFINE_VTABLE (blob); +HB_DEFINE_VTABLE (face); +HB_DEFINE_VTABLE (font); +HB_DEFINE_VTABLE (font_funcs); +HB_DEFINE_VTABLE (map); +HB_DEFINE_VTABLE (set); +HB_DEFINE_VTABLE (shape_plan); +HB_DEFINE_VTABLE (unicode_funcs); +HB_DEFINE_VTABLE (draw_funcs); +HB_DEFINE_VTABLE (paint_funcs); + +#undef HB_DEFINE_VTABLE + + +#ifdef HB_SUBSET_H + +#define HB_DEFINE_VTABLE(name) \ + template<> \ + struct vtable \ + : vtable_t {} + + +HB_DEFINE_VTABLE (subset_input); +HB_DEFINE_VTABLE (subset_plan); + +#undef HB_DEFINE_VTABLE + +#endif + + +} // namespace hb + +/* Workaround for GCC < 7, see: + * https://gcc.gnu.org/bugzilla/show_bug.cgi?id=56480 + * https://stackoverflow.com/a/25594741 */ +namespace std { + + +template +struct hash> +{ + std::size_t operator()(const hb::shared_ptr& v) const noexcept + { + std::size_t h = std::hash{}(v.get ()); + return h; + } +}; + +template +struct hash> +{ + std::size_t operator()(const hb::unique_ptr& v) const noexcept + { + std::size_t h = std::hash{}(v.get ()); + return h; + } +}; + + +} // namespace std + +#endif /* __cplusplus */ + +#endif /* HB_CPLUSPLUS_HH */ diff --git a/dependencies/linux64/include/harfbuzz/hb-deprecated.h b/dependencies/linux64/include/harfbuzz/hb-deprecated.h new file mode 100644 index 0000000..62911bb --- /dev/null +++ b/dependencies/linux64/include/harfbuzz/hb-deprecated.h @@ -0,0 +1,396 @@ +/* + * Copyright © 2013 Google, Inc. + * + * This is part of HarfBuzz, a text shaping library. + * + * Permission is hereby granted, without written agreement and without + * license or royalty fees, to use, copy, modify, and distribute this + * software and its documentation for any purpose, provided that the + * above copyright notice and the following two paragraphs appear in + * all copies of this software. + * + * IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE TO ANY PARTY FOR + * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES + * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN + * IF THE COPYRIGHT HOLDER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + * THE COPYRIGHT HOLDER SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, + * BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND + * FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS + * ON AN "AS IS" BASIS, AND THE COPYRIGHT HOLDER HAS NO OBLIGATION TO + * PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. + * + * Google Author(s): Behdad Esfahbod + */ + +#if !defined(HB_H_IN) && !defined(HB_NO_SINGLE_HEADER_ERROR) +#error "Include instead." +#endif + +#ifndef HB_DEPRECATED_H +#define HB_DEPRECATED_H + +#include "hb-common.h" +#include "hb-unicode.h" +#include "hb-font.h" +#include "hb-set.h" + + +/** + * SECTION:hb-deprecated + * @title: hb-deprecated + * @short_description: Deprecated API + * @include: hb.h + * + * These API have been deprecated in favor of newer API, or because they + * were deemed unnecessary. + **/ + + +HB_BEGIN_DECLS + +#ifndef HB_DISABLE_DEPRECATED + + +/** + * HB_SCRIPT_CANADIAN_ABORIGINAL: + * + * Use #HB_SCRIPT_CANADIAN_SYLLABICS instead. + * + * Deprecated: 0.9.20 + */ +#define HB_SCRIPT_CANADIAN_ABORIGINAL HB_SCRIPT_CANADIAN_SYLLABICS + +/** + * HB_BUFFER_FLAGS_DEFAULT: + * + * Use #HB_BUFFER_FLAG_DEFAULT instead. + * + * Deprecated: 0.9.20 + */ +#define HB_BUFFER_FLAGS_DEFAULT HB_BUFFER_FLAG_DEFAULT +/** + * HB_BUFFER_SERIALIZE_FLAGS_DEFAULT: + * + * Use #HB_BUFFER_SERIALIZE_FLAG_DEFAULT instead. + * + * Deprecated: 0.9.20 + */ +#define HB_BUFFER_SERIALIZE_FLAGS_DEFAULT HB_BUFFER_SERIALIZE_FLAG_DEFAULT + +/** + * hb_font_get_glyph_func_t: + * @font: #hb_font_t to work upon + * @font_data: @font user data pointer + * @unicode: The Unicode code point to query + * @variation_selector: The variation-selector code point to query + * @glyph: (out): The glyph ID retrieved + * @user_data: User data pointer passed by the caller + * + * A virtual method for the #hb_font_funcs_t of an #hb_font_t object. + * + * This method should retrieve the glyph ID for a specified Unicode code point + * font, with an optional variation selector. + * + * Return value: `true` if data found, `false` otherwise + * Deprecated: 1.2.3 + * + **/ +typedef hb_bool_t (*hb_font_get_glyph_func_t) (hb_font_t *font, void *font_data, + hb_codepoint_t unicode, hb_codepoint_t variation_selector, + hb_codepoint_t *glyph, + void *user_data); + +HB_DEPRECATED_FOR (hb_font_funcs_set_nominal_glyph_func and hb_font_funcs_set_variation_glyph_func) +HB_EXTERN void +hb_font_funcs_set_glyph_func (hb_font_funcs_t *ffuncs, + hb_font_get_glyph_func_t func, + void *user_data, hb_destroy_func_t destroy); + +/* https://github.com/harfbuzz/harfbuzz/pull/4207 */ +/** + * HB_UNICODE_COMBINING_CLASS_CCC133: + * + * [Tibetan] + * + * Deprecated: 7.2.0 + **/ +#define HB_UNICODE_COMBINING_CLASS_CCC133 133 + +/** + * hb_unicode_eastasian_width_func_t: + * @ufuncs: A Unicode-functions structure + * @unicode: The code point to query + * @user_data: User data pointer passed by the caller + * + * A virtual method for the #hb_unicode_funcs_t structure. + * + * Deprecated: 2.0.0 + */ +typedef unsigned int (*hb_unicode_eastasian_width_func_t) (hb_unicode_funcs_t *ufuncs, + hb_codepoint_t unicode, + void *user_data); + +/** + * hb_unicode_funcs_set_eastasian_width_func: + * @ufuncs: a Unicode-function structure + * @func: (closure user_data) (destroy destroy) (scope notified): The callback function to assign + * @user_data: Data to pass to @func + * @destroy: (nullable): The function to call when @user_data is not needed anymore + * + * Sets the implementation function for #hb_unicode_eastasian_width_func_t. + * + * Since: 0.9.2 + * Deprecated: 2.0.0 + **/ +HB_EXTERN HB_DEPRECATED void +hb_unicode_funcs_set_eastasian_width_func (hb_unicode_funcs_t *ufuncs, + hb_unicode_eastasian_width_func_t func, + void *user_data, hb_destroy_func_t destroy); + +/** + * hb_unicode_eastasian_width: + * @ufuncs: a Unicode-function structure + * @unicode: The code point to query + * + * Don't use. Not used by HarfBuzz. + * + * Since: 0.9.2 + * Deprecated: 2.0.0 + **/ +HB_EXTERN HB_DEPRECATED unsigned int +hb_unicode_eastasian_width (hb_unicode_funcs_t *ufuncs, + hb_codepoint_t unicode); + + +/** + * hb_unicode_decompose_compatibility_func_t: + * @ufuncs: a Unicode function structure + * @u: codepoint to decompose + * @decomposed: address of codepoint array (of length #HB_UNICODE_MAX_DECOMPOSITION_LEN) to write decomposition into + * @user_data: user data pointer as passed to hb_unicode_funcs_set_decompose_compatibility_func() + * + * Fully decompose @u to its Unicode compatibility decomposition. The codepoints of the decomposition will be written to @decomposed. + * The complete length of the decomposition will be returned. + * + * If @u has no compatibility decomposition, zero should be returned. + * + * The Unicode standard guarantees that a buffer of length #HB_UNICODE_MAX_DECOMPOSITION_LEN codepoints will always be sufficient for any + * compatibility decomposition plus an terminating value of 0. Consequently, @decompose must be allocated by the caller to be at least this length. Implementations + * of this function type must ensure that they do not write past the provided array. + * + * Return value: number of codepoints in the full compatibility decomposition of @u, or 0 if no decomposition available. + * + * Deprecated: 2.0.0 + */ +typedef unsigned int (*hb_unicode_decompose_compatibility_func_t) (hb_unicode_funcs_t *ufuncs, + hb_codepoint_t u, + hb_codepoint_t *decomposed, + void *user_data); + +/** + * HB_UNICODE_MAX_DECOMPOSITION_LEN: + * + * See Unicode 6.1 for details on the maximum decomposition length. + * + * Deprecated: 2.0.0 + */ +#define HB_UNICODE_MAX_DECOMPOSITION_LEN (18+1) /* codepoints */ + +/** + * hb_unicode_funcs_set_decompose_compatibility_func: + * @ufuncs: A Unicode-functions structure + * @func: (closure user_data) (destroy destroy) (scope notified): The callback function to assign + * @user_data: Data to pass to @func + * @destroy: (nullable): The function to call when @user_data is not needed anymore + * + * Sets the implementation function for #hb_unicode_decompose_compatibility_func_t. + * + * + * + * Since: 0.9.2 + * Deprecated: 2.0.0 + **/ +HB_EXTERN HB_DEPRECATED void +hb_unicode_funcs_set_decompose_compatibility_func (hb_unicode_funcs_t *ufuncs, + hb_unicode_decompose_compatibility_func_t func, + void *user_data, hb_destroy_func_t destroy); + +HB_EXTERN HB_DEPRECATED unsigned int +hb_unicode_decompose_compatibility (hb_unicode_funcs_t *ufuncs, + hb_codepoint_t u, + hb_codepoint_t *decomposed); + + +/** + * hb_font_get_glyph_v_kerning_func_t: + * + * A virtual method for the #hb_font_funcs_t of an #hb_font_t object. + * + * This method should retrieve the kerning-adjustment value for a glyph-pair in + * the specified font, for vertical text segments. + * + **/ +typedef hb_font_get_glyph_kerning_func_t hb_font_get_glyph_v_kerning_func_t; + +/** + * hb_font_funcs_set_glyph_v_kerning_func: + * @ffuncs: A font-function structure + * @func: (closure user_data) (destroy destroy) (scope notified): The callback function to assign + * @user_data: Data to pass to @func + * @destroy: (nullable): The function to call when @user_data is not needed anymore + * + * Sets the implementation function for #hb_font_get_glyph_v_kerning_func_t. + * + * Since: 0.9.2 + * Deprecated: 2.0.0 + **/ +HB_EXTERN void +hb_font_funcs_set_glyph_v_kerning_func (hb_font_funcs_t *ffuncs, + hb_font_get_glyph_v_kerning_func_t func, + void *user_data, hb_destroy_func_t destroy); + +HB_EXTERN hb_position_t +hb_font_get_glyph_v_kerning (hb_font_t *font, + hb_codepoint_t top_glyph, hb_codepoint_t bottom_glyph); + + +/** + * hb_font_get_glyph_shape_func_t: + * @font: #hb_font_t to work upon + * @font_data: @font user data pointer + * @glyph: The glyph ID to query + * @draw_funcs: The draw functions to send the shape data to + * @draw_data: The data accompanying the draw functions + * @user_data: User data pointer passed by the caller + * + * A virtual method for the #hb_font_funcs_t of an #hb_font_t object. + * + * Since: 4.0.0 + * Deprecated: 7.0.0: Use #hb_font_draw_glyph_func_t instead + **/ +typedef void (*hb_font_get_glyph_shape_func_t) (hb_font_t *font, void *font_data, + hb_codepoint_t glyph, + hb_draw_funcs_t *draw_funcs, void *draw_data, + void *user_data); + +/** + * hb_font_draw_glyph_func_t: + * @font: #hb_font_t to work upon + * @font_data: @font user data pointer + * @glyph: The glyph ID to query + * @draw_funcs: The draw functions to send the shape data to + * @draw_data: The data accompanying the draw functions + * @user_data: User data pointer passed by the caller + * + * A virtual method for the #hb_font_funcs_t of an #hb_font_t object. + * + * Since: 7.0.0 + * XDeprecated: REPLACEME: Use hb_font_draw_glyph_func_or_fail_t instead. + **/ +typedef void (*hb_font_draw_glyph_func_t) (hb_font_t *font, void *font_data, + hb_codepoint_t glyph, + hb_draw_funcs_t *draw_funcs, void *draw_data, + void *user_data); + +/** + * hb_font_paint_glyph_func_t: + * @font: #hb_font_t to work upon + * @font_data: @font user data pointer + * @glyph: The glyph ID to query + * @paint_funcs: The paint functions to use + * @paint_data: The data accompanying the paint functions + * @palette_index: The color palette to use + * @foreground: The foreground color + * @user_data: User data pointer passed by the caller + * + * A virtual method for the #hb_font_funcs_t of an #hb_font_t object. + * + * Since: 7.0.0 + * XDeprecated: REPLACEME: Use hb_font_paint_glyph_or_fail_func_t instead. + */ +typedef hb_bool_t (*hb_font_paint_glyph_func_t) (hb_font_t *font, void *font_data, + hb_codepoint_t glyph, + hb_paint_funcs_t *paint_funcs, void *paint_data, + unsigned int palette_index, + hb_color_t foreground, + void *user_data); + +/** + * hb_font_funcs_set_glyph_shape_func: + * @ffuncs: A font-function structure + * @func: (closure user_data) (destroy destroy) (scope notified): The callback function to assign + * @user_data: Data to pass to @func + * @destroy: (nullable): The function to call when @user_data is not needed anymore + * + * Sets the implementation function for #hb_font_get_glyph_shape_func_t, + * which is the same as #hb_font_draw_glyph_func_t. + * + * Since: 4.0.0 + * Deprecated: 7.0.0: Use hb_font_funcs_set_draw_glyph_func() instead + **/ +HB_DEPRECATED_FOR (hb_font_funcs_set_draw_glyph_or_fail_func) +HB_EXTERN void +hb_font_funcs_set_glyph_shape_func (hb_font_funcs_t *ffuncs, + hb_font_get_glyph_shape_func_t func, + void *user_data, hb_destroy_func_t destroy); + +/** + * hb_font_funcs_set_draw_glyph_func: + * @ffuncs: A font-function structure + * @func: (closure user_data) (destroy destroy) (scope notified): The callback function to assign + * @user_data: Data to pass to @func + * @destroy: (nullable): The function to call when @user_data is not needed anymore + * + * Sets the implementation function for #hb_font_draw_glyph_func_t. + * + * Since: 7.0.0 + * XDeprecated: REPLACEME: Use hb_font_funcs_set_draw_glyph_or_fail_func instead. + **/ +HB_DEPRECATED_FOR (hb_font_funcs_set_draw_glyph_or_fail_func) +HB_EXTERN void +hb_font_funcs_set_draw_glyph_func (hb_font_funcs_t *ffuncs, + hb_font_draw_glyph_func_t func, + void *user_data, hb_destroy_func_t destroy); + +/** + * hb_font_funcs_set_paint_glyph_func: + * @ffuncs: A font-function structure + * @func: (closure user_data) (destroy destroy) (scope notified): The callback function to assign + * @user_data: Data to pass to @func + * @destroy: (nullable): The function to call when @user_data is no longer needed + * + * Sets the implementation function for #hb_font_paint_glyph_func_t. + * + * Since: 7.0.0 + * XDeprecated: REPLACEME: Use hb_font_funcs_set_paint_glyph_or_fail_func() instead. + */ +HB_DEPRECATED_FOR (hb_font_funcs_set_paint_glyph_or_fail_func) +HB_EXTERN void +hb_font_funcs_set_paint_glyph_func (hb_font_funcs_t *ffuncs, + hb_font_paint_glyph_func_t func, + void *user_data, hb_destroy_func_t destroy); + +HB_DEPRECATED_FOR (hb_font_draw_glyph_or_fail) +HB_EXTERN void +hb_font_get_glyph_shape (hb_font_t *font, + hb_codepoint_t glyph, + hb_draw_funcs_t *dfuncs, void *draw_data); + + +/** + * HB_AAT_LAYOUT_FEATURE_TYPE_CURISVE_CONNECTION: + * + * Use #HB_AAT_LAYOUT_FEATURE_TYPE_CURSIVE_CONNECTION instead. + * + * Deprecated: 8.3.0 + */ +#define HB_AAT_LAYOUT_FEATURE_TYPE_CURISVE_CONNECTION HB_AAT_LAYOUT_FEATURE_TYPE_CURSIVE_CONNECTION + +#endif + + +HB_END_DECLS + +#endif /* HB_DEPRECATED_H */ diff --git a/dependencies/linux64/include/harfbuzz/hb-draw.h b/dependencies/linux64/include/harfbuzz/hb-draw.h new file mode 100644 index 0000000..76aa93f --- /dev/null +++ b/dependencies/linux64/include/harfbuzz/hb-draw.h @@ -0,0 +1,340 @@ +/* + * Copyright © 2019-2020 Ebrahim Byagowi + * + * This is part of HarfBuzz, a text shaping library. + * + * Permission is hereby granted, without written agreement and without + * license or royalty fees, to use, copy, modify, and distribute this + * software and its documentation for any purpose, provided that the + * above copyright notice and the following two paragraphs appear in + * all copies of this software. + * + * IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE TO ANY PARTY FOR + * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES + * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN + * IF THE COPYRIGHT HOLDER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + * THE COPYRIGHT HOLDER SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, + * BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND + * FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS + * ON AN "AS IS" BASIS, AND THE COPYRIGHT HOLDER HAS NO OBLIGATION TO + * PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. + */ + +#if !defined(HB_H_IN) && !defined(HB_NO_SINGLE_HEADER_ERROR) +#error "Include instead." +#endif + +#ifndef HB_DRAW_H +#define HB_DRAW_H + +#include "hb.h" + +HB_BEGIN_DECLS + + +/** + * hb_draw_state_t + * @path_open: Whether there is an open path + * @path_start_x: X component of the start of current path + * @path_start_y: Y component of the start of current path + * @current_x: X component of current point + * @current_y: Y component of current point + * + * Current drawing state. + * + * Since: 4.0.0 + **/ +typedef struct hb_draw_state_t { + hb_bool_t path_open; + + float path_start_x; + float path_start_y; + + float current_x; + float current_y; + + /*< private >*/ + hb_var_num_t reserved1; + hb_var_num_t reserved2; + hb_var_num_t reserved3; + hb_var_num_t reserved4; + hb_var_num_t reserved5; + hb_var_num_t reserved6; + hb_var_num_t reserved7; +} hb_draw_state_t; + +/** + * HB_DRAW_STATE_DEFAULT: + * + * The default #hb_draw_state_t at the start of glyph drawing. + */ +#define HB_DRAW_STATE_DEFAULT {0, 0.f, 0.f, 0.f, 0.f, {0}, {0}, {0}, {0}, {0}, {0}, {0}} + + +/** + * hb_draw_funcs_t: + * + * Glyph draw callbacks. + * + * #hb_draw_move_to_func_t, #hb_draw_line_to_func_t and + * #hb_draw_cubic_to_func_t calls are necessary to be defined but we translate + * #hb_draw_quadratic_to_func_t calls to #hb_draw_cubic_to_func_t if the + * callback isn't defined. + * + * Since: 4.0.0 + **/ + +typedef struct hb_draw_funcs_t hb_draw_funcs_t; + + +/** + * hb_draw_move_to_func_t: + * @dfuncs: draw functions object + * @draw_data: The data accompanying the draw functions in hb_font_draw_glyph() + * @st: current draw state + * @to_x: X component of target point + * @to_y: Y component of target point + * @user_data: User data pointer passed to hb_draw_funcs_set_move_to_func() + * + * A virtual method for the #hb_draw_funcs_t to perform a "move-to" draw + * operation. + * + * Since: 4.0.0 + * + **/ +typedef void (*hb_draw_move_to_func_t) (hb_draw_funcs_t *dfuncs, void *draw_data, + hb_draw_state_t *st, + float to_x, float to_y, + void *user_data); + +/** + * hb_draw_line_to_func_t: + * @dfuncs: draw functions object + * @draw_data: The data accompanying the draw functions in hb_font_draw_glyph() + * @st: current draw state + * @to_x: X component of target point + * @to_y: Y component of target point + * @user_data: User data pointer passed to hb_draw_funcs_set_line_to_func() + * + * A virtual method for the #hb_draw_funcs_t to perform a "line-to" draw + * operation. + * + * Since: 4.0.0 + * + **/ +typedef void (*hb_draw_line_to_func_t) (hb_draw_funcs_t *dfuncs, void *draw_data, + hb_draw_state_t *st, + float to_x, float to_y, + void *user_data); + +/** + * hb_draw_quadratic_to_func_t: + * @dfuncs: draw functions object + * @draw_data: The data accompanying the draw functions in hb_font_draw_glyph() + * @st: current draw state + * @control_x: X component of control point + * @control_y: Y component of control point + * @to_x: X component of target point + * @to_y: Y component of target point + * @user_data: User data pointer passed to hb_draw_funcs_set_quadratic_to_func() + * + * A virtual method for the #hb_draw_funcs_t to perform a "quadratic-to" draw + * operation. + * + * Since: 4.0.0 + * + **/ +typedef void (*hb_draw_quadratic_to_func_t) (hb_draw_funcs_t *dfuncs, void *draw_data, + hb_draw_state_t *st, + float control_x, float control_y, + float to_x, float to_y, + void *user_data); + +/** + * hb_draw_cubic_to_func_t: + * @dfuncs: draw functions object + * @draw_data: The data accompanying the draw functions in hb_font_draw_glyph() + * @st: current draw state + * @control1_x: X component of first control point + * @control1_y: Y component of first control point + * @control2_x: X component of second control point + * @control2_y: Y component of second control point + * @to_x: X component of target point + * @to_y: Y component of target point + * @user_data: User data pointer passed to hb_draw_funcs_set_cubic_to_func() + * + * A virtual method for the #hb_draw_funcs_t to perform a "cubic-to" draw + * operation. + * + * Since: 4.0.0 + * + **/ +typedef void (*hb_draw_cubic_to_func_t) (hb_draw_funcs_t *dfuncs, void *draw_data, + hb_draw_state_t *st, + float control1_x, float control1_y, + float control2_x, float control2_y, + float to_x, float to_y, + void *user_data); + +/** + * hb_draw_close_path_func_t: + * @dfuncs: draw functions object + * @draw_data: The data accompanying the draw functions in hb_font_draw_glyph() + * @st: current draw state + * @user_data: User data pointer passed to hb_draw_funcs_set_close_path_func() + * + * A virtual method for the #hb_draw_funcs_t to perform a "close-path" draw + * operation. + * + * Since: 4.0.0 + * + **/ +typedef void (*hb_draw_close_path_func_t) (hb_draw_funcs_t *dfuncs, void *draw_data, + hb_draw_state_t *st, + void *user_data); + +/** + * hb_draw_funcs_set_move_to_func: + * @dfuncs: draw functions object + * @func: (closure user_data) (destroy destroy) (scope notified): move-to callback + * @user_data: Data to pass to @func + * @destroy: (nullable): The function to call when @user_data is not needed anymore + * + * Sets move-to callback to the draw functions object. + * + * Since: 4.0.0 + **/ +HB_EXTERN void +hb_draw_funcs_set_move_to_func (hb_draw_funcs_t *dfuncs, + hb_draw_move_to_func_t func, + void *user_data, hb_destroy_func_t destroy); + +/** + * hb_draw_funcs_set_line_to_func: + * @dfuncs: draw functions object + * @func: (closure user_data) (destroy destroy) (scope notified): line-to callback + * @user_data: Data to pass to @func + * @destroy: (nullable): The function to call when @user_data is not needed anymore + * + * Sets line-to callback to the draw functions object. + * + * Since: 4.0.0 + **/ +HB_EXTERN void +hb_draw_funcs_set_line_to_func (hb_draw_funcs_t *dfuncs, + hb_draw_line_to_func_t func, + void *user_data, hb_destroy_func_t destroy); + +/** + * hb_draw_funcs_set_quadratic_to_func: + * @dfuncs: draw functions object + * @func: (closure user_data) (destroy destroy) (scope notified): quadratic-to callback + * @user_data: Data to pass to @func + * @destroy: (nullable): The function to call when @user_data is not needed anymore + * + * Sets quadratic-to callback to the draw functions object. + * + * Since: 4.0.0 + **/ +HB_EXTERN void +hb_draw_funcs_set_quadratic_to_func (hb_draw_funcs_t *dfuncs, + hb_draw_quadratic_to_func_t func, + void *user_data, hb_destroy_func_t destroy); + +/** + * hb_draw_funcs_set_cubic_to_func: + * @dfuncs: draw functions + * @func: (closure user_data) (destroy destroy) (scope notified): cubic-to callback + * @user_data: Data to pass to @func + * @destroy: (nullable): The function to call when @user_data is not needed anymore + * + * Sets cubic-to callback to the draw functions object. + * + * Since: 4.0.0 + **/ +HB_EXTERN void +hb_draw_funcs_set_cubic_to_func (hb_draw_funcs_t *dfuncs, + hb_draw_cubic_to_func_t func, + void *user_data, hb_destroy_func_t destroy); + +/** + * hb_draw_funcs_set_close_path_func: + * @dfuncs: draw functions object + * @func: (closure user_data) (destroy destroy) (scope notified): close-path callback + * @user_data: Data to pass to @func + * @destroy: (nullable): The function to call when @user_data is not needed anymore + * + * Sets close-path callback to the draw functions object. + * + * Since: 4.0.0 + **/ +HB_EXTERN void +hb_draw_funcs_set_close_path_func (hb_draw_funcs_t *dfuncs, + hb_draw_close_path_func_t func, + void *user_data, hb_destroy_func_t destroy); + + +HB_EXTERN hb_draw_funcs_t * +hb_draw_funcs_create (void); + +HB_EXTERN hb_draw_funcs_t * +hb_draw_funcs_get_empty (void); + +HB_EXTERN hb_draw_funcs_t * +hb_draw_funcs_reference (hb_draw_funcs_t *dfuncs); + +HB_EXTERN void +hb_draw_funcs_destroy (hb_draw_funcs_t *dfuncs); + +HB_EXTERN hb_bool_t +hb_draw_funcs_set_user_data (hb_draw_funcs_t *dfuncs, + hb_user_data_key_t *key, + void * data, + hb_destroy_func_t destroy, + hb_bool_t replace); + + +HB_EXTERN void * +hb_draw_funcs_get_user_data (const hb_draw_funcs_t *dfuncs, + hb_user_data_key_t *key); + +HB_EXTERN void +hb_draw_funcs_make_immutable (hb_draw_funcs_t *dfuncs); + +HB_EXTERN hb_bool_t +hb_draw_funcs_is_immutable (hb_draw_funcs_t *dfuncs); + + +HB_EXTERN void +hb_draw_move_to (hb_draw_funcs_t *dfuncs, void *draw_data, + hb_draw_state_t *st, + float to_x, float to_y); + +HB_EXTERN void +hb_draw_line_to (hb_draw_funcs_t *dfuncs, void *draw_data, + hb_draw_state_t *st, + float to_x, float to_y); + +HB_EXTERN void +hb_draw_quadratic_to (hb_draw_funcs_t *dfuncs, void *draw_data, + hb_draw_state_t *st, + float control_x, float control_y, + float to_x, float to_y); + +HB_EXTERN void +hb_draw_cubic_to (hb_draw_funcs_t *dfuncs, void *draw_data, + hb_draw_state_t *st, + float control1_x, float control1_y, + float control2_x, float control2_y, + float to_x, float to_y); + +HB_EXTERN void +hb_draw_close_path (hb_draw_funcs_t *dfuncs, void *draw_data, + hb_draw_state_t *st); + + +HB_END_DECLS + +#endif /* HB_DRAW_H */ diff --git a/dependencies/linux64/include/harfbuzz/hb-face.h b/dependencies/linux64/include/harfbuzz/hb-face.h new file mode 100644 index 0000000..b8386f0 --- /dev/null +++ b/dependencies/linux64/include/harfbuzz/hb-face.h @@ -0,0 +1,242 @@ +/* + * Copyright © 2009 Red Hat, Inc. + * + * This is part of HarfBuzz, a text shaping library. + * + * Permission is hereby granted, without written agreement and without + * license or royalty fees, to use, copy, modify, and distribute this + * software and its documentation for any purpose, provided that the + * above copyright notice and the following two paragraphs appear in + * all copies of this software. + * + * IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE TO ANY PARTY FOR + * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES + * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN + * IF THE COPYRIGHT HOLDER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + * THE COPYRIGHT HOLDER SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, + * BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND + * FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS + * ON AN "AS IS" BASIS, AND THE COPYRIGHT HOLDER HAS NO OBLIGATION TO + * PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. + * + * Red Hat Author(s): Behdad Esfahbod + */ + +#if !defined(HB_H_IN) && !defined(HB_NO_SINGLE_HEADER_ERROR) +#error "Include instead." +#endif + +#ifndef HB_FACE_H +#define HB_FACE_H + +#include "hb-common.h" +#include "hb-blob.h" +#include "hb-map.h" +#include "hb-set.h" + +HB_BEGIN_DECLS + + +HB_EXTERN unsigned int +hb_face_count (hb_blob_t *blob); + + +/* + * hb_face_t + */ + +/** + * hb_face_t: + * + * Data type for holding font faces. + * + **/ +typedef struct hb_face_t hb_face_t; + +HB_EXTERN hb_face_t * +hb_face_create (hb_blob_t *blob, + unsigned int index); + +HB_EXTERN hb_face_t * +hb_face_create_or_fail (hb_blob_t *blob, + unsigned int index); + +HB_EXTERN hb_face_t * +hb_face_create_or_fail_using (hb_blob_t *blob, + unsigned int index, + const char *loader_name); + +HB_EXTERN hb_face_t * +hb_face_create_from_file_or_fail (const char *file_name, + unsigned int index); + +HB_EXTERN hb_face_t * +hb_face_create_from_file_or_fail_using (const char *file_name, + unsigned int index, + const char *loader_name); + +HB_EXTERN const char ** +hb_face_list_loaders (void); + + +/** + * hb_reference_table_func_t: + * @face: an #hb_face_t to reference table for + * @tag: the tag of the table to reference + * @user_data: User data pointer passed by the caller + * + * Callback function for hb_face_create_for_tables(). The @tag is the tag of the + * table to reference, and the special tag #HB_TAG_NONE is used to reference the + * blob of the face itself. If referencing the face blob is not possible, it is + * recommended to set hb_get_table_tags_func_t on the @face to allow + * hb_face_reference_blob() to create a face blob out of individual table blobs. + * + * Return value: (transfer full): A pointer to the @tag table within @face or + * `NULL` if the table is not found or cannot be referenced. + * + * Since: 0.9.2 + */ + +typedef hb_blob_t * (*hb_reference_table_func_t) (hb_face_t *face, hb_tag_t tag, void *user_data); + +/* calls destroy() when not needing user_data anymore */ +HB_EXTERN hb_face_t * +hb_face_create_for_tables (hb_reference_table_func_t reference_table_func, + void *user_data, + hb_destroy_func_t destroy); + +HB_EXTERN hb_face_t * +hb_face_get_empty (void); + +HB_EXTERN hb_face_t * +hb_face_reference (hb_face_t *face); + +HB_EXTERN void +hb_face_destroy (hb_face_t *face); + +HB_EXTERN hb_bool_t +hb_face_set_user_data (hb_face_t *face, + hb_user_data_key_t *key, + void * data, + hb_destroy_func_t destroy, + hb_bool_t replace); + +HB_EXTERN void * +hb_face_get_user_data (const hb_face_t *face, + hb_user_data_key_t *key); + +HB_EXTERN void +hb_face_make_immutable (hb_face_t *face); + +HB_EXTERN hb_bool_t +hb_face_is_immutable (hb_face_t *face); + + +HB_EXTERN hb_blob_t * +hb_face_reference_table (const hb_face_t *face, + hb_tag_t tag); + +HB_EXTERN hb_blob_t * +hb_face_reference_blob (hb_face_t *face); + +HB_EXTERN void +hb_face_set_index (hb_face_t *face, + unsigned int index); + +HB_EXTERN unsigned int +hb_face_get_index (const hb_face_t *face); + +HB_EXTERN void +hb_face_set_upem (hb_face_t *face, + unsigned int upem); + +HB_EXTERN unsigned int +hb_face_get_upem (const hb_face_t *face); + +HB_EXTERN void +hb_face_set_glyph_count (hb_face_t *face, + unsigned int glyph_count); + +HB_EXTERN unsigned int +hb_face_get_glyph_count (const hb_face_t *face); + + +/** + * hb_get_table_tags_func_t: + * @face: A face object + * @start_offset: The index of first table tag to retrieve + * @table_count: (inout): Input = the maximum number of table tags to return; + * Output = the actual number of table tags returned (may be zero) + * @table_tags: (out) (array length=table_count): The array of table tags found + * @user_data: User data pointer passed by the caller + * + * Callback function for hb_face_get_table_tags(). + * + * Return value: Total number of tables, or zero if it is not possible to list + * + * Since: 10.0.0 + */ +typedef unsigned int (*hb_get_table_tags_func_t) (const hb_face_t *face, + unsigned int start_offset, + unsigned int *table_count, /* IN/OUT */ + hb_tag_t *table_tags /* OUT */, + void *user_data); + +HB_EXTERN void +hb_face_set_get_table_tags_func (hb_face_t *face, + hb_get_table_tags_func_t func, + void *user_data, + hb_destroy_func_t destroy); + +HB_EXTERN unsigned int +hb_face_get_table_tags (const hb_face_t *face, + unsigned int start_offset, + unsigned int *table_count, /* IN/OUT */ + hb_tag_t *table_tags /* OUT */); + + +/* + * Character set. + */ + +HB_EXTERN void +hb_face_collect_unicodes (hb_face_t *face, + hb_set_t *out); + +HB_EXTERN void +hb_face_collect_nominal_glyph_mapping (hb_face_t *face, + hb_map_t *mapping, + hb_set_t *unicodes); + +HB_EXTERN void +hb_face_collect_variation_selectors (hb_face_t *face, + hb_set_t *out); + +HB_EXTERN void +hb_face_collect_variation_unicodes (hb_face_t *face, + hb_codepoint_t variation_selector, + hb_set_t *out); + + +/* + * Builder face. + */ + +HB_EXTERN hb_face_t * +hb_face_builder_create (void); + +HB_EXTERN hb_bool_t +hb_face_builder_add_table (hb_face_t *face, + hb_tag_t tag, + hb_blob_t *blob); + +HB_EXTERN void +hb_face_builder_sort_tables (hb_face_t *face, + const hb_tag_t *tags); + + +HB_END_DECLS + +#endif /* HB_FACE_H */ diff --git a/dependencies/linux64/include/harfbuzz/hb-features.h b/dependencies/linux64/include/harfbuzz/hb-features.h new file mode 100644 index 0000000..0136c27 --- /dev/null +++ b/dependencies/linux64/include/harfbuzz/hb-features.h @@ -0,0 +1,119 @@ +/* + * Copyright © 2022 Red Hat, Inc. + * + * This is part of HarfBuzz, a text shaping library. + * + * Permission is hereby granted, without written agreement and without + * license or royalty fees, to use, copy, modify, and distribute this + * software and its documentation for any purpose, provided that the + * above copyright notice and the following two paragraphs appear in + * all copies of this software. + * + * IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE TO ANY PARTY FOR + * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES + * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN + * IF THE COPYRIGHT HOLDER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + * THE COPYRIGHT HOLDER SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, + * BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND + * FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS + * ON AN "AS IS" BASIS, AND THE COPYRIGHT HOLDER HAS NO OBLIGATION TO + * PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. + */ + +#ifndef HB_FEATURES_H +#define HB_FEATURES_H + +HB_BEGIN_DECLS + +/** + * SECTION: hb-features + * @title: hb-features + * @short_description: Feature detection + * @include: hb-features.h + * + * Macros for detecting optional HarfBuzz features at build time. + **/ + +/** + * HB_HAS_CAIRO: + * + * Defined if Harfbuzz has been built with cairo support. + */ +/* #undef HB_HAS_CAIRO */ + +/** + * HB_HAS_CORETEXT: + * + * Defined if Harfbuzz has been built with CoreText support. + */ +/* #undef HB_HAS_CORETEXT */ + +/** + * HB_HAS_DIRECTWRITE: + * + * Defined if Harfbuzz has been built with DirectWrite support. + */ +/* #undef HB_HAS_DIRECTWRITE */ + +/** + * HB_HAS_FREETYPE: + * + * Defined if Harfbuzz has been built with Freetype support. + */ +/* #undef HB_HAS_FREETYPE */ + +/** + * HB_HAS_GDI: + * + * Defined if Harfbuzz has been built with GDI support. + */ +/* #undef HB_HAS_GDI */ + +/** + * HB_HAS_GLIB: + * + * Defined if Harfbuzz has been built with GLib support. + */ +/* #undef HB_HAS_GLIB */ + +/** + * HB_HAS_GOBJECT: + * + * Defined if Harfbuzz has been built with GObject support. + */ +/* #undef HB_HAS_GOBJECT */ + +/** + * HB_HAS_GRAPHITE: + * + * Defined if Harfbuzz has been built with Graphite support. + */ +/* #undef HB_HAS_GRAPHITE */ + +/** + * HB_HAS_ICU: + * + * Defined if Harfbuzz has been built with ICU support. + */ +/* #undef HB_HAS_ICU */ + +/** + * HB_HAS_UNISCRIBE: + * + * Defined if Harfbuzz has been built with Uniscribe support. + */ +/* #undef HB_HAS_UNISCRIBE */ + +/** + * HB_HAS_WASM: + * + * Defined if Harfbuzz has been built with WebAssembly support. + */ +/* #undef HB_HAS_WASM */ + + +HB_END_DECLS + +#endif /* HB_FEATURES_H */ diff --git a/dependencies/linux64/include/harfbuzz/hb-font.h b/dependencies/linux64/include/harfbuzz/hb-font.h new file mode 100644 index 0000000..77178bf --- /dev/null +++ b/dependencies/linux64/include/harfbuzz/hb-font.h @@ -0,0 +1,1178 @@ +/* + * Copyright © 2009 Red Hat, Inc. + * + * This is part of HarfBuzz, a text shaping library. + * + * Permission is hereby granted, without written agreement and without + * license or royalty fees, to use, copy, modify, and distribute this + * software and its documentation for any purpose, provided that the + * above copyright notice and the following two paragraphs appear in + * all copies of this software. + * + * IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE TO ANY PARTY FOR + * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES + * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN + * IF THE COPYRIGHT HOLDER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + * THE COPYRIGHT HOLDER SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, + * BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND + * FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS + * ON AN "AS IS" BASIS, AND THE COPYRIGHT HOLDER HAS NO OBLIGATION TO + * PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. + * + * Red Hat Author(s): Behdad Esfahbod + */ + +#if !defined(HB_H_IN) && !defined(HB_NO_SINGLE_HEADER_ERROR) +#error "Include instead." +#endif + +#ifndef HB_FONT_H +#define HB_FONT_H + +#include "hb-common.h" +#include "hb-face.h" +#include "hb-draw.h" +#include "hb-paint.h" + +HB_BEGIN_DECLS + +/* + * hb_font_funcs_t + */ + +/** + * hb_font_funcs_t: + * + * Data type containing a set of virtual methods used for + * working on #hb_font_t font objects. + * + * HarfBuzz provides a lightweight default function for each of + * the methods in #hb_font_funcs_t. Client programs can implement + * their own replacements for the individual font functions, as + * needed, and replace the default by calling the setter for a + * method. + * + **/ +typedef struct hb_font_funcs_t hb_font_funcs_t; + +HB_EXTERN hb_font_funcs_t * +hb_font_funcs_create (void); + +HB_EXTERN hb_font_funcs_t * +hb_font_funcs_get_empty (void); + +HB_EXTERN hb_font_funcs_t * +hb_font_funcs_reference (hb_font_funcs_t *ffuncs); + +HB_EXTERN void +hb_font_funcs_destroy (hb_font_funcs_t *ffuncs); + +HB_EXTERN hb_bool_t +hb_font_funcs_set_user_data (hb_font_funcs_t *ffuncs, + hb_user_data_key_t *key, + void * data, + hb_destroy_func_t destroy, + hb_bool_t replace); + + +HB_EXTERN void * +hb_font_funcs_get_user_data (const hb_font_funcs_t *ffuncs, + hb_user_data_key_t *key); + + +HB_EXTERN void +hb_font_funcs_make_immutable (hb_font_funcs_t *ffuncs); + +HB_EXTERN hb_bool_t +hb_font_funcs_is_immutable (hb_font_funcs_t *ffuncs); + + +/* font extents */ + +/** + * hb_font_extents_t: + * @ascender: The height of typographic ascenders. + * @descender: The depth of typographic descenders. + * @line_gap: The suggested line-spacing gap. + * + * Font-wide extent values, measured in font units. + * + * Note that typically @ascender is positive and @descender + * negative, in coordinate systems that grow up. + **/ +typedef struct hb_font_extents_t { + hb_position_t ascender; + hb_position_t descender; + hb_position_t line_gap; + /*< private >*/ + hb_position_t reserved9; + hb_position_t reserved8; + hb_position_t reserved7; + hb_position_t reserved6; + hb_position_t reserved5; + hb_position_t reserved4; + hb_position_t reserved3; + hb_position_t reserved2; + hb_position_t reserved1; +} hb_font_extents_t; + +/* func types */ + +/** + * hb_font_get_font_extents_func_t: + * @font: #hb_font_t to work upon + * @font_data: @font user data pointer + * @extents: (out): The font extents retrieved + * @user_data: User data pointer passed by the caller + * + * This method should retrieve the extents for a font. + * + **/ +typedef hb_bool_t (*hb_font_get_font_extents_func_t) (hb_font_t *font, void *font_data, + hb_font_extents_t *extents, + void *user_data); + +/** + * hb_font_get_font_h_extents_func_t: + * + * A virtual method for the #hb_font_funcs_t of an #hb_font_t object. + * + * This method should retrieve the extents for a font, for horizontal-direction + * text segments. Extents must be returned in an #hb_glyph_extents output + * parameter. + * + **/ +typedef hb_font_get_font_extents_func_t hb_font_get_font_h_extents_func_t; + +/** + * hb_font_get_font_v_extents_func_t: + * + * A virtual method for the #hb_font_funcs_t of an #hb_font_t object. + * + * This method should retrieve the extents for a font, for vertical-direction + * text segments. Extents must be returned in an #hb_glyph_extents output + * parameter. + * + **/ +typedef hb_font_get_font_extents_func_t hb_font_get_font_v_extents_func_t; + + +/** + * hb_font_get_nominal_glyph_func_t: + * @font: #hb_font_t to work upon + * @font_data: @font user data pointer + * @unicode: The Unicode code point to query + * @glyph: (out): The glyph ID retrieved + * @user_data: User data pointer passed by the caller + * + * A virtual method for the #hb_font_funcs_t of an #hb_font_t object. + * + * This method should retrieve the nominal glyph ID for a specified Unicode code + * point. Glyph IDs must be returned in a #hb_codepoint_t output parameter. + * + * Return value: `true` if data found, `false` otherwise + * + **/ +typedef hb_bool_t (*hb_font_get_nominal_glyph_func_t) (hb_font_t *font, void *font_data, + hb_codepoint_t unicode, + hb_codepoint_t *glyph, + void *user_data); + +/** + * hb_font_get_variation_glyph_func_t: + * @font: #hb_font_t to work upon + * @font_data: @font user data pointer + * @unicode: The Unicode code point to query + * @variation_selector: The variation-selector code point to query + * @glyph: (out): The glyph ID retrieved + * @user_data: User data pointer passed by the caller + * + * A virtual method for the #hb_font_funcs_t of an #hb_font_t object. + * + * This method should retrieve the glyph ID for a specified Unicode code point + * followed by a specified Variation Selector code point. Glyph IDs must be + * returned in a #hb_codepoint_t output parameter. + * + * Return value: `true` if data found, `false` otherwise + * + **/ +typedef hb_bool_t (*hb_font_get_variation_glyph_func_t) (hb_font_t *font, void *font_data, + hb_codepoint_t unicode, hb_codepoint_t variation_selector, + hb_codepoint_t *glyph, + void *user_data); + + +/** + * hb_font_get_nominal_glyphs_func_t: + * @font: #hb_font_t to work upon + * @font_data: @font user data pointer + * @count: number of code points to query + * @first_unicode: The first Unicode code point to query + * @unicode_stride: The stride between successive code points + * @first_glyph: (out): The first glyph ID retrieved + * @glyph_stride: The stride between successive glyph IDs + * @user_data: User data pointer passed by the caller + * + * A virtual method for the #hb_font_funcs_t of an #hb_font_t object. + * + * This method should retrieve the nominal glyph IDs for a sequence of + * Unicode code points. Glyph IDs must be returned in a #hb_codepoint_t + * output parameter. + * + * Return value: the number of code points processed + * + **/ +typedef unsigned int (*hb_font_get_nominal_glyphs_func_t) (hb_font_t *font, void *font_data, + unsigned int count, + const hb_codepoint_t *first_unicode, + unsigned int unicode_stride, + hb_codepoint_t *first_glyph, + unsigned int glyph_stride, + void *user_data); + +/** + * hb_font_get_glyph_advance_func_t: + * @font: #hb_font_t to work upon + * @font_data: @font user data pointer + * @glyph: The glyph ID to query + * @user_data: User data pointer passed by the caller + * + * A virtual method for the #hb_font_funcs_t of an #hb_font_t object. + * + * This method should retrieve the advance for a specified glyph. The + * method must return an #hb_position_t. + * + * Return value: The advance of @glyph within @font + * + **/ +typedef hb_position_t (*hb_font_get_glyph_advance_func_t) (hb_font_t *font, void *font_data, + hb_codepoint_t glyph, + void *user_data); + +/** + * hb_font_get_glyph_h_advance_func_t: + * + * A virtual method for the #hb_font_funcs_t of an #hb_font_t object. + * + * This method should retrieve the advance for a specified glyph, in + * horizontal-direction text segments. Advances must be returned in + * an #hb_position_t output parameter. + * + **/ +typedef hb_font_get_glyph_advance_func_t hb_font_get_glyph_h_advance_func_t; + +/** + * hb_font_get_glyph_v_advance_func_t: + * + * A virtual method for the #hb_font_funcs_t of an #hb_font_t object. + * + * This method should retrieve the advance for a specified glyph, in + * vertical-direction text segments. Advances must be returned in + * an #hb_position_t output parameter. + * + **/ +typedef hb_font_get_glyph_advance_func_t hb_font_get_glyph_v_advance_func_t; + +/** + * hb_font_get_glyph_advances_func_t: + * @font: #hb_font_t to work upon + * @font_data: @font user data pointer + * @count: The number of glyph IDs in the sequence queried + * @first_glyph: The first glyph ID to query + * @glyph_stride: The stride between successive glyph IDs + * @first_advance: (out): The first advance retrieved + * @advance_stride: The stride between successive advances + * @user_data: User data pointer passed by the caller + * + * A virtual method for the #hb_font_funcs_t of an #hb_font_t object. + * + * This method should retrieve the advances for a sequence of glyphs. + * + **/ +typedef void (*hb_font_get_glyph_advances_func_t) (hb_font_t* font, void* font_data, + unsigned int count, + const hb_codepoint_t *first_glyph, + unsigned glyph_stride, + hb_position_t *first_advance, + unsigned advance_stride, + void *user_data); + +/** + * hb_font_get_glyph_h_advances_func_t: + * + * A virtual method for the #hb_font_funcs_t of an #hb_font_t object. + * + * This method should retrieve the advances for a sequence of glyphs, in + * horizontal-direction text segments. + * + **/ +typedef hb_font_get_glyph_advances_func_t hb_font_get_glyph_h_advances_func_t; + +/** + * hb_font_get_glyph_v_advances_func_t: + * + * A virtual method for the #hb_font_funcs_t of an #hb_font_t object. + * + * This method should retrieve the advances for a sequence of glyphs, in + * vertical-direction text segments. + * + **/ +typedef hb_font_get_glyph_advances_func_t hb_font_get_glyph_v_advances_func_t; + +/** + * hb_font_get_glyph_origin_func_t: + * @font: #hb_font_t to work upon + * @font_data: @font user data pointer + * @glyph: The glyph ID to query + * @x: (out): The X coordinate of the origin + * @y: (out): The Y coordinate of the origin + * @user_data: User data pointer passed by the caller + * + * A virtual method for the #hb_font_funcs_t of an #hb_font_t object. + * + * This method should retrieve the (X,Y) coordinates (in font units) of the + * origin for a glyph. Each coordinate must be returned in an #hb_position_t + * output parameter. + * + * Return value: `true` if data found, `false` otherwise + * + **/ +typedef hb_bool_t (*hb_font_get_glyph_origin_func_t) (hb_font_t *font, void *font_data, + hb_codepoint_t glyph, + hb_position_t *x, hb_position_t *y, + void *user_data); + +/** + * hb_font_get_glyph_h_origin_func_t: + * + * A virtual method for the #hb_font_funcs_t of an #hb_font_t object. + * + * This method should retrieve the (X,Y) coordinates (in font units) of the + * origin for a glyph, for horizontal-direction text segments. Each + * coordinate must be returned in an #hb_position_t output parameter. + * + **/ +typedef hb_font_get_glyph_origin_func_t hb_font_get_glyph_h_origin_func_t; + +/** + * hb_font_get_glyph_v_origin_func_t: + * + * A virtual method for the #hb_font_funcs_t of an #hb_font_t object. + * + * This method should retrieve the (X,Y) coordinates (in font units) of the + * origin for a glyph, for vertical-direction text segments. Each coordinate + * must be returned in an #hb_position_t output parameter. + * + **/ +typedef hb_font_get_glyph_origin_func_t hb_font_get_glyph_v_origin_func_t; + +/** + * hb_font_get_glyph_kerning_func_t: + * @font: #hb_font_t to work upon + * @font_data: @font user data pointer + * @first_glyph: The glyph ID of the first glyph in the glyph pair + * @second_glyph: The glyph ID of the second glyph in the glyph pair + * @user_data: User data pointer passed by the caller + * + * This method should retrieve the kerning-adjustment value for a glyph-pair in + * the specified font, for horizontal text segments. + * + **/ +typedef hb_position_t (*hb_font_get_glyph_kerning_func_t) (hb_font_t *font, void *font_data, + hb_codepoint_t first_glyph, hb_codepoint_t second_glyph, + void *user_data); +/** + * hb_font_get_glyph_h_kerning_func_t: + * + * A virtual method for the #hb_font_funcs_t of an #hb_font_t object. + * + * This method should retrieve the kerning-adjustment value for a glyph-pair in + * the specified font, for horizontal text segments. + * + **/ +typedef hb_font_get_glyph_kerning_func_t hb_font_get_glyph_h_kerning_func_t; + + +/** + * hb_font_get_glyph_extents_func_t: + * @font: #hb_font_t to work upon + * @font_data: @font user data pointer + * @glyph: The glyph ID to query + * @extents: (out): The #hb_glyph_extents_t retrieved + * @user_data: User data pointer passed by the caller + * + * A virtual method for the #hb_font_funcs_t of an #hb_font_t object. + * + * This method should retrieve the extents for a specified glyph. Extents must be + * returned in an #hb_glyph_extents output parameter. + * + * Return value: `true` if data found, `false` otherwise + * + **/ +typedef hb_bool_t (*hb_font_get_glyph_extents_func_t) (hb_font_t *font, void *font_data, + hb_codepoint_t glyph, + hb_glyph_extents_t *extents, + void *user_data); + +/** + * hb_font_get_glyph_contour_point_func_t: + * @font: #hb_font_t to work upon + * @font_data: @font user data pointer + * @glyph: The glyph ID to query + * @point_index: The contour-point index to query + * @x: (out): The X value retrieved for the contour point + * @y: (out): The Y value retrieved for the contour point + * @user_data: User data pointer passed by the caller + * + * A virtual method for the #hb_font_funcs_t of an #hb_font_t object. + * + * This method should retrieve the (X,Y) coordinates (in font units) for a + * specified contour point in a glyph. Each coordinate must be returned as + * an #hb_position_t output parameter. + * + * Return value: `true` if data found, `false` otherwise + * + **/ +typedef hb_bool_t (*hb_font_get_glyph_contour_point_func_t) (hb_font_t *font, void *font_data, + hb_codepoint_t glyph, unsigned int point_index, + hb_position_t *x, hb_position_t *y, + void *user_data); + + +/** + * hb_font_get_glyph_name_func_t: + * @font: #hb_font_t to work upon + * @font_data: @font user data pointer + * @glyph: The glyph ID to query + * @name: (out) (array length=size): Name string retrieved for the glyph ID + * @size: Length of the glyph-name string retrieved + * @user_data: User data pointer passed by the caller + * + * A virtual method for the #hb_font_funcs_t of an #hb_font_t object. + * + * This method should retrieve the glyph name that corresponds to a + * glyph ID. The name should be returned in a string output parameter. + * + * Return value: `true` if data found, `false` otherwise + * + **/ +typedef hb_bool_t (*hb_font_get_glyph_name_func_t) (hb_font_t *font, void *font_data, + hb_codepoint_t glyph, + char *name, unsigned int size, + void *user_data); + +/** + * hb_font_get_glyph_from_name_func_t: + * @font: #hb_font_t to work upon + * @font_data: @font user data pointer + * @name: (array length=len): The name string to query + * @len: The length of the name queried + * @glyph: (out): The glyph ID retrieved + * @user_data: User data pointer passed by the caller + * + * A virtual method for the #hb_font_funcs_t of an #hb_font_t object. + * + * This method should retrieve the glyph ID that corresponds to a glyph-name + * string. + * + * Return value: `true` if data found, `false` otherwise + * + **/ +typedef hb_bool_t (*hb_font_get_glyph_from_name_func_t) (hb_font_t *font, void *font_data, + const char *name, int len, /* -1 means nul-terminated */ + hb_codepoint_t *glyph, + void *user_data); + +/** + * hb_font_draw_glyph_or_fail_func_t: + * @font: #hb_font_t to work upon + * @font_data: @font user data pointer + * @glyph: The glyph ID to query + * @draw_funcs: The draw functions to send the shape data to + * @draw_data: The data accompanying the draw functions + * @user_data: User data pointer passed by the caller + * + * A virtual method for the #hb_font_funcs_t of an #hb_font_t object. + * + * Return value: `true` if glyph was drawn, `false` otherwise + * + * XSince: REPLACEME + **/ +typedef hb_bool_t (*hb_font_draw_glyph_or_fail_func_t) (hb_font_t *font, void *font_data, + hb_codepoint_t glyph, + hb_draw_funcs_t *draw_funcs, void *draw_data, + void *user_data); + +/** + * hb_font_paint_glyph_or_fail_func_t: + * @font: #hb_font_t to work upon + * @font_data: @font user data pointer + * @glyph: The glyph ID to query + * @paint_funcs: The paint functions to use + * @paint_data: The data accompanying the paint functions + * @palette_index: The color palette to use + * @foreground: The foreground color + * @user_data: User data pointer passed by the caller + * + * A virtual method for the #hb_font_funcs_t of an #hb_font_t object. + * + * Return value: `true` if glyph was painted, `false` otherwise + * + * XSince: REPLACEME + */ +typedef hb_bool_t (*hb_font_paint_glyph_or_fail_func_t) (hb_font_t *font, void *font_data, + hb_codepoint_t glyph, + hb_paint_funcs_t *paint_funcs, void *paint_data, + unsigned int palette_index, + hb_color_t foreground, + void *user_data); + +/* func setters */ + +/** + * hb_font_funcs_set_font_h_extents_func: + * @ffuncs: A font-function structure + * @func: (closure user_data) (destroy destroy) (scope notified): The callback function to assign + * @user_data: Data to pass to @func + * @destroy: (nullable): The function to call when @user_data is not needed anymore + * + * Sets the implementation function for #hb_font_get_font_h_extents_func_t. + * + * Since: 1.1.2 + **/ +HB_EXTERN void +hb_font_funcs_set_font_h_extents_func (hb_font_funcs_t *ffuncs, + hb_font_get_font_h_extents_func_t func, + void *user_data, hb_destroy_func_t destroy); + +/** + * hb_font_funcs_set_font_v_extents_func: + * @ffuncs: A font-function structure + * @func: (closure user_data) (destroy destroy) (scope notified): The callback function to assign + * @user_data: Data to pass to @func + * @destroy: (nullable): The function to call when @user_data is not needed anymore + * + * Sets the implementation function for #hb_font_get_font_v_extents_func_t. + * + * Since: 1.1.2 + **/ +HB_EXTERN void +hb_font_funcs_set_font_v_extents_func (hb_font_funcs_t *ffuncs, + hb_font_get_font_v_extents_func_t func, + void *user_data, hb_destroy_func_t destroy); + +/** + * hb_font_funcs_set_nominal_glyph_func: + * @ffuncs: A font-function structure + * @func: (closure user_data) (destroy destroy) (scope notified): The callback function to assign + * @user_data: Data to pass to @func + * @destroy: (nullable): The function to call when @user_data is not needed anymore + * + * Sets the implementation function for #hb_font_get_nominal_glyph_func_t. + * + * Since: 1.2.3 + **/ +HB_EXTERN void +hb_font_funcs_set_nominal_glyph_func (hb_font_funcs_t *ffuncs, + hb_font_get_nominal_glyph_func_t func, + void *user_data, hb_destroy_func_t destroy); + +/** + * hb_font_funcs_set_nominal_glyphs_func: + * @ffuncs: A font-function structure + * @func: (closure user_data) (destroy destroy) (scope notified): The callback function to assign + * @user_data: Data to pass to @func + * @destroy: (nullable): The function to call when @user_data is not needed anymore + * + * Sets the implementation function for #hb_font_get_nominal_glyphs_func_t. + * + * Since: 2.0.0 + **/ +HB_EXTERN void +hb_font_funcs_set_nominal_glyphs_func (hb_font_funcs_t *ffuncs, + hb_font_get_nominal_glyphs_func_t func, + void *user_data, hb_destroy_func_t destroy); + +/** + * hb_font_funcs_set_variation_glyph_func: + * @ffuncs: A font-function structure + * @func: (closure user_data) (destroy destroy) (scope notified): The callback function to assign + * @user_data: Data to pass to @func + * @destroy: (nullable): The function to call when @user_data is not needed anymore + * + * Sets the implementation function for #hb_font_get_variation_glyph_func_t. + * + * Since: 1.2.3 + **/ +HB_EXTERN void +hb_font_funcs_set_variation_glyph_func (hb_font_funcs_t *ffuncs, + hb_font_get_variation_glyph_func_t func, + void *user_data, hb_destroy_func_t destroy); + +/** + * hb_font_funcs_set_glyph_h_advance_func: + * @ffuncs: A font-function structure + * @func: (closure user_data) (destroy destroy) (scope notified): The callback function to assign + * @user_data: Data to pass to @func + * @destroy: (nullable): The function to call when @user_data is not needed anymore + * + * Sets the implementation function for #hb_font_get_glyph_h_advance_func_t. + * + * Since: 0.9.2 + **/ +HB_EXTERN void +hb_font_funcs_set_glyph_h_advance_func (hb_font_funcs_t *ffuncs, + hb_font_get_glyph_h_advance_func_t func, + void *user_data, hb_destroy_func_t destroy); + +/** + * hb_font_funcs_set_glyph_v_advance_func: + * @ffuncs: A font-function structure + * @func: (closure user_data) (destroy destroy) (scope notified): The callback function to assign + * @user_data: Data to pass to @func + * @destroy: (nullable): The function to call when @user_data is not needed anymore + * + * Sets the implementation function for #hb_font_get_glyph_v_advance_func_t. + * + * Since: 0.9.2 + **/ +HB_EXTERN void +hb_font_funcs_set_glyph_v_advance_func (hb_font_funcs_t *ffuncs, + hb_font_get_glyph_v_advance_func_t func, + void *user_data, hb_destroy_func_t destroy); + +/** + * hb_font_funcs_set_glyph_h_advances_func: + * @ffuncs: A font-function structure + * @func: (closure user_data) (destroy destroy) (scope notified): The callback function to assign + * @user_data: Data to pass to @func + * @destroy: (nullable): The function to call when @user_data is not needed anymore + * + * Sets the implementation function for #hb_font_get_glyph_h_advances_func_t. + * + * Since: 1.8.6 + **/ +HB_EXTERN void +hb_font_funcs_set_glyph_h_advances_func (hb_font_funcs_t *ffuncs, + hb_font_get_glyph_h_advances_func_t func, + void *user_data, hb_destroy_func_t destroy); + +/** + * hb_font_funcs_set_glyph_v_advances_func: + * @ffuncs: A font-function structure + * @func: (closure user_data) (destroy destroy) (scope notified): The callback function to assign + * @user_data: Data to pass to @func + * @destroy: (nullable): The function to call when @user_data is not needed anymore + * + * Sets the implementation function for #hb_font_get_glyph_v_advances_func_t. + * + * Since: 1.8.6 + **/ +HB_EXTERN void +hb_font_funcs_set_glyph_v_advances_func (hb_font_funcs_t *ffuncs, + hb_font_get_glyph_v_advances_func_t func, + void *user_data, hb_destroy_func_t destroy); + +/** + * hb_font_funcs_set_glyph_h_origin_func: + * @ffuncs: A font-function structure + * @func: (closure user_data) (destroy destroy) (scope notified): The callback function to assign + * @user_data: Data to pass to @func + * @destroy: (nullable): The function to call when @user_data is not needed anymore + * + * Sets the implementation function for #hb_font_get_glyph_h_origin_func_t. + * + * Since: 0.9.2 + **/ +HB_EXTERN void +hb_font_funcs_set_glyph_h_origin_func (hb_font_funcs_t *ffuncs, + hb_font_get_glyph_h_origin_func_t func, + void *user_data, hb_destroy_func_t destroy); + +/** + * hb_font_funcs_set_glyph_v_origin_func: + * @ffuncs: A font-function structure + * @func: (closure user_data) (destroy destroy) (scope notified): The callback function to assign + * @user_data: Data to pass to @func + * @destroy: (nullable): The function to call when @user_data is not needed anymore + * + * Sets the implementation function for #hb_font_get_glyph_v_origin_func_t. + * + * Since: 0.9.2 + **/ +HB_EXTERN void +hb_font_funcs_set_glyph_v_origin_func (hb_font_funcs_t *ffuncs, + hb_font_get_glyph_v_origin_func_t func, + void *user_data, hb_destroy_func_t destroy); + +/** + * hb_font_funcs_set_glyph_h_kerning_func: + * @ffuncs: A font-function structure + * @func: (closure user_data) (destroy destroy) (scope notified): The callback function to assign + * @user_data: Data to pass to @func + * @destroy: (nullable): The function to call when @user_data is not needed anymore + * + * Sets the implementation function for #hb_font_get_glyph_h_kerning_func_t. + * + * Since: 0.9.2 + **/ +HB_EXTERN void +hb_font_funcs_set_glyph_h_kerning_func (hb_font_funcs_t *ffuncs, + hb_font_get_glyph_h_kerning_func_t func, + void *user_data, hb_destroy_func_t destroy); + +/** + * hb_font_funcs_set_glyph_extents_func: + * @ffuncs: A font-function structure + * @func: (closure user_data) (destroy destroy) (scope notified): The callback function to assign + * @user_data: Data to pass to @func + * @destroy: (nullable): The function to call when @user_data is not needed anymore + * + * Sets the implementation function for #hb_font_get_glyph_extents_func_t. + * + * Since: 0.9.2 + **/ +HB_EXTERN void +hb_font_funcs_set_glyph_extents_func (hb_font_funcs_t *ffuncs, + hb_font_get_glyph_extents_func_t func, + void *user_data, hb_destroy_func_t destroy); + +/** + * hb_font_funcs_set_glyph_contour_point_func: + * @ffuncs: A font-function structure + * @func: (closure user_data) (destroy destroy) (scope notified): The callback function to assign + * @user_data: Data to pass to @func + * @destroy: (nullable): The function to call when @user_data is not needed anymore + * + * Sets the implementation function for #hb_font_get_glyph_contour_point_func_t. + * + * Since: 0.9.2 + **/ +HB_EXTERN void +hb_font_funcs_set_glyph_contour_point_func (hb_font_funcs_t *ffuncs, + hb_font_get_glyph_contour_point_func_t func, + void *user_data, hb_destroy_func_t destroy); + +/** + * hb_font_funcs_set_glyph_name_func: + * @ffuncs: A font-function structure + * @func: (closure user_data) (destroy destroy) (scope notified): The callback function to assign + * @user_data: Data to pass to @func + * @destroy: (nullable): The function to call when @user_data is not needed anymore + * + * Sets the implementation function for #hb_font_get_glyph_name_func_t. + * + * Since: 0.9.2 + **/ +HB_EXTERN void +hb_font_funcs_set_glyph_name_func (hb_font_funcs_t *ffuncs, + hb_font_get_glyph_name_func_t func, + void *user_data, hb_destroy_func_t destroy); + +/** + * hb_font_funcs_set_glyph_from_name_func: + * @ffuncs: A font-function structure + * @func: (closure user_data) (destroy destroy) (scope notified): The callback function to assign + * @user_data: Data to pass to @func + * @destroy: (nullable): The function to call when @user_data is not needed anymore + * + * Sets the implementation function for #hb_font_get_glyph_from_name_func_t. + * + * Since: 0.9.2 + **/ +HB_EXTERN void +hb_font_funcs_set_glyph_from_name_func (hb_font_funcs_t *ffuncs, + hb_font_get_glyph_from_name_func_t func, + void *user_data, hb_destroy_func_t destroy); + +/** + * hb_font_funcs_set_draw_glyph_or_fail_func: + * @ffuncs: A font-function structure + * @func: (closure user_data) (destroy destroy) (scope notified): The callback function to assign + * @user_data: Data to pass to @func + * @destroy: (nullable): The function to call when @user_data is not needed anymore + * + * Sets the implementation function for #hb_font_draw_glyph_or_fail_func_t. + * + * XSince: REPLACEME + **/ +HB_EXTERN void +hb_font_funcs_set_draw_glyph_or_fail_func (hb_font_funcs_t *ffuncs, + hb_font_draw_glyph_or_fail_func_t func, + void *user_data, hb_destroy_func_t destroy); + +/** + * hb_font_funcs_set_paint_glyph_or_fail_func: + * @ffuncs: A font-function structure + * @func: (closure user_data) (destroy destroy) (scope notified): The callback function to assign + * @user_data: Data to pass to @func + * @destroy: (nullable): The function to call when @user_data is no longer needed + * + * Sets the implementation function for #hb_font_paint_glyph_or_fail_func_t. + * + * XSince: REPLACEME + */ +HB_EXTERN void +hb_font_funcs_set_paint_glyph_or_fail_func (hb_font_funcs_t *ffuncs, + hb_font_paint_glyph_or_fail_func_t func, + void *user_data, hb_destroy_func_t destroy); + +/* func dispatch */ + +HB_EXTERN hb_bool_t +hb_font_get_h_extents (hb_font_t *font, + hb_font_extents_t *extents); +HB_EXTERN hb_bool_t +hb_font_get_v_extents (hb_font_t *font, + hb_font_extents_t *extents); + +HB_EXTERN hb_bool_t +hb_font_get_nominal_glyph (hb_font_t *font, + hb_codepoint_t unicode, + hb_codepoint_t *glyph); +HB_EXTERN hb_bool_t +hb_font_get_variation_glyph (hb_font_t *font, + hb_codepoint_t unicode, hb_codepoint_t variation_selector, + hb_codepoint_t *glyph); + +HB_EXTERN unsigned int +hb_font_get_nominal_glyphs (hb_font_t *font, + unsigned int count, + const hb_codepoint_t *first_unicode, + unsigned int unicode_stride, + hb_codepoint_t *first_glyph, + unsigned int glyph_stride); + +HB_EXTERN hb_position_t +hb_font_get_glyph_h_advance (hb_font_t *font, + hb_codepoint_t glyph); +HB_EXTERN hb_position_t +hb_font_get_glyph_v_advance (hb_font_t *font, + hb_codepoint_t glyph); + +HB_EXTERN void +hb_font_get_glyph_h_advances (hb_font_t* font, + unsigned int count, + const hb_codepoint_t *first_glyph, + unsigned glyph_stride, + hb_position_t *first_advance, + unsigned advance_stride); +HB_EXTERN void +hb_font_get_glyph_v_advances (hb_font_t* font, + unsigned int count, + const hb_codepoint_t *first_glyph, + unsigned glyph_stride, + hb_position_t *first_advance, + unsigned advance_stride); + +HB_EXTERN hb_bool_t +hb_font_get_glyph_h_origin (hb_font_t *font, + hb_codepoint_t glyph, + hb_position_t *x, hb_position_t *y); +HB_EXTERN hb_bool_t +hb_font_get_glyph_v_origin (hb_font_t *font, + hb_codepoint_t glyph, + hb_position_t *x, hb_position_t *y); + +HB_EXTERN hb_position_t +hb_font_get_glyph_h_kerning (hb_font_t *font, + hb_codepoint_t left_glyph, hb_codepoint_t right_glyph); + +HB_EXTERN hb_bool_t +hb_font_get_glyph_extents (hb_font_t *font, + hb_codepoint_t glyph, + hb_glyph_extents_t *extents); + +HB_EXTERN hb_bool_t +hb_font_get_glyph_contour_point (hb_font_t *font, + hb_codepoint_t glyph, unsigned int point_index, + hb_position_t *x, hb_position_t *y); + +HB_EXTERN hb_bool_t +hb_font_get_glyph_name (hb_font_t *font, + hb_codepoint_t glyph, + char *name, unsigned int size); +HB_EXTERN hb_bool_t +hb_font_get_glyph_from_name (hb_font_t *font, + const char *name, int len, /* -1 means nul-terminated */ + hb_codepoint_t *glyph); + +HB_EXTERN hb_bool_t +hb_font_draw_glyph_or_fail (hb_font_t *font, + hb_codepoint_t glyph, + hb_draw_funcs_t *dfuncs, void *draw_data); + +HB_EXTERN hb_bool_t +hb_font_paint_glyph_or_fail (hb_font_t *font, + hb_codepoint_t glyph, + hb_paint_funcs_t *pfuncs, void *paint_data, + unsigned int palette_index, + hb_color_t foreground); + +/* high-level funcs, with fallback */ + +/* Calls either hb_font_get_nominal_glyph() if variation_selector is 0, + * otherwise calls hb_font_get_variation_glyph(). */ +HB_EXTERN hb_bool_t +hb_font_get_glyph (hb_font_t *font, + hb_codepoint_t unicode, hb_codepoint_t variation_selector, + hb_codepoint_t *glyph); + +HB_EXTERN void +hb_font_get_extents_for_direction (hb_font_t *font, + hb_direction_t direction, + hb_font_extents_t *extents); +HB_EXTERN void +hb_font_get_glyph_advance_for_direction (hb_font_t *font, + hb_codepoint_t glyph, + hb_direction_t direction, + hb_position_t *x, hb_position_t *y); +HB_EXTERN void +hb_font_get_glyph_advances_for_direction (hb_font_t* font, + hb_direction_t direction, + unsigned int count, + const hb_codepoint_t *first_glyph, + unsigned glyph_stride, + hb_position_t *first_advance, + unsigned advance_stride); +HB_EXTERN void +hb_font_get_glyph_origin_for_direction (hb_font_t *font, + hb_codepoint_t glyph, + hb_direction_t direction, + hb_position_t *x, hb_position_t *y); +HB_EXTERN void +hb_font_add_glyph_origin_for_direction (hb_font_t *font, + hb_codepoint_t glyph, + hb_direction_t direction, + hb_position_t *x, hb_position_t *y); +HB_EXTERN void +hb_font_subtract_glyph_origin_for_direction (hb_font_t *font, + hb_codepoint_t glyph, + hb_direction_t direction, + hb_position_t *x, hb_position_t *y); + +HB_EXTERN void +hb_font_get_glyph_kerning_for_direction (hb_font_t *font, + hb_codepoint_t first_glyph, hb_codepoint_t second_glyph, + hb_direction_t direction, + hb_position_t *x, hb_position_t *y); + +HB_EXTERN hb_bool_t +hb_font_get_glyph_extents_for_origin (hb_font_t *font, + hb_codepoint_t glyph, + hb_direction_t direction, + hb_glyph_extents_t *extents); + +HB_EXTERN hb_bool_t +hb_font_get_glyph_contour_point_for_origin (hb_font_t *font, + hb_codepoint_t glyph, unsigned int point_index, + hb_direction_t direction, + hb_position_t *x, hb_position_t *y); + +/* Generates gidDDD if glyph has no name. */ +HB_EXTERN void +hb_font_glyph_to_string (hb_font_t *font, + hb_codepoint_t glyph, + char *s, unsigned int size); +/* Parses gidDDD and uniUUUU strings automatically. */ +HB_EXTERN hb_bool_t +hb_font_glyph_from_string (hb_font_t *font, + const char *s, int len, /* -1 means nul-terminated */ + hb_codepoint_t *glyph); + +/* Older alias for hb_font_draw_glyph_or_fail() with no return value. */ +HB_EXTERN void +hb_font_draw_glyph (hb_font_t *font, + hb_codepoint_t glyph, + hb_draw_funcs_t *dfuncs, void *draw_data); + +/* Paints color glyph; if failed, draws outline glyph. */ +HB_EXTERN void +hb_font_paint_glyph (hb_font_t *font, + hb_codepoint_t glyph, + hb_paint_funcs_t *pfuncs, void *paint_data, + unsigned int palette_index, + hb_color_t foreground); + +/* + * hb_font_t + */ + +/* Fonts are very light-weight objects */ + +HB_EXTERN hb_font_t * +hb_font_create (hb_face_t *face); + +HB_EXTERN hb_font_t * +hb_font_create_sub_font (hb_font_t *parent); + +HB_EXTERN hb_font_t * +hb_font_get_empty (void); + +HB_EXTERN hb_font_t * +hb_font_reference (hb_font_t *font); + +HB_EXTERN void +hb_font_destroy (hb_font_t *font); + +HB_EXTERN hb_bool_t +hb_font_set_user_data (hb_font_t *font, + hb_user_data_key_t *key, + void * data, + hb_destroy_func_t destroy, + hb_bool_t replace); + + +HB_EXTERN void * +hb_font_get_user_data (const hb_font_t *font, + hb_user_data_key_t *key); + +HB_EXTERN void +hb_font_make_immutable (hb_font_t *font); + +HB_EXTERN hb_bool_t +hb_font_is_immutable (hb_font_t *font); + +HB_EXTERN unsigned int +hb_font_get_serial (hb_font_t *font); + +HB_EXTERN void +hb_font_changed (hb_font_t *font); + +HB_EXTERN void +hb_font_set_parent (hb_font_t *font, + hb_font_t *parent); + +HB_EXTERN hb_font_t * +hb_font_get_parent (hb_font_t *font); + +HB_EXTERN void +hb_font_set_face (hb_font_t *font, + hb_face_t *face); + +HB_EXTERN hb_face_t * +hb_font_get_face (hb_font_t *font); + + +HB_EXTERN void +hb_font_set_funcs (hb_font_t *font, + hb_font_funcs_t *klass, + void *font_data, + hb_destroy_func_t destroy); + +/* Be *very* careful with this function! */ +HB_EXTERN void +hb_font_set_funcs_data (hb_font_t *font, + void *font_data, + hb_destroy_func_t destroy); + +HB_EXTERN hb_bool_t +hb_font_set_funcs_using (hb_font_t *font, + const char *name); + +HB_EXTERN const char ** +hb_font_list_funcs (void); + +HB_EXTERN void +hb_font_set_scale (hb_font_t *font, + int x_scale, + int y_scale); + +HB_EXTERN void +hb_font_get_scale (hb_font_t *font, + int *x_scale, + int *y_scale); + +/* + * A zero value means "no hinting in that direction" + */ +HB_EXTERN void +hb_font_set_ppem (hb_font_t *font, + unsigned int x_ppem, + unsigned int y_ppem); + +HB_EXTERN void +hb_font_get_ppem (hb_font_t *font, + unsigned int *x_ppem, + unsigned int *y_ppem); + +/* + * Point size per EM. Used for optical-sizing in CoreText. + * A value of zero means "not set". + */ +HB_EXTERN void +hb_font_set_ptem (hb_font_t *font, float ptem); + +HB_EXTERN float +hb_font_get_ptem (hb_font_t *font); + +HB_EXTERN hb_bool_t +hb_font_is_synthetic (hb_font_t *font); + +HB_EXTERN void +hb_font_set_synthetic_bold (hb_font_t *font, + float x_embolden, float y_embolden, + hb_bool_t in_place); + +HB_EXTERN void +hb_font_get_synthetic_bold (hb_font_t *font, + float *x_embolden, float *y_embolden, + hb_bool_t *in_place); + +HB_EXTERN void +hb_font_set_synthetic_slant (hb_font_t *font, float slant); + +HB_EXTERN float +hb_font_get_synthetic_slant (hb_font_t *font); + +HB_EXTERN void +hb_font_set_variations (hb_font_t *font, + const hb_variation_t *variations, + unsigned int variations_length); + +HB_EXTERN void +hb_font_set_variation (hb_font_t *font, + hb_tag_t tag, + float value); + +HB_EXTERN void +hb_font_set_var_coords_design (hb_font_t *font, + const float *coords, + unsigned int coords_length); + +HB_EXTERN const float * +hb_font_get_var_coords_design (hb_font_t *font, + unsigned int *length); + +HB_EXTERN void +hb_font_set_var_coords_normalized (hb_font_t *font, + const int *coords, /* 2.14 normalized */ + unsigned int coords_length); + +HB_EXTERN const int * +hb_font_get_var_coords_normalized (hb_font_t *font, + unsigned int *length); + +/** + * HB_FONT_NO_VAR_NAMED_INSTANCE: + * + * Constant signifying that a font does not have any + * named-instance index set. This is the default of + * a font. + * + * Since: 7.0.0 + */ +#define HB_FONT_NO_VAR_NAMED_INSTANCE 0xFFFFFFFF + +HB_EXTERN void +hb_font_set_var_named_instance (hb_font_t *font, + unsigned int instance_index); + +HB_EXTERN unsigned int +hb_font_get_var_named_instance (hb_font_t *font); + +HB_END_DECLS + +#endif /* HB_FONT_H */ diff --git a/dependencies/linux64/include/harfbuzz/hb-map.h b/dependencies/linux64/include/harfbuzz/hb-map.h new file mode 100644 index 0000000..0ae1717 --- /dev/null +++ b/dependencies/linux64/include/harfbuzz/hb-map.h @@ -0,0 +1,143 @@ +/* + * Copyright © 2018 Google, Inc. + * + * This is part of HarfBuzz, a text shaping library. + * + * Permission is hereby granted, without written agreement and without + * license or royalty fees, to use, copy, modify, and distribute this + * software and its documentation for any purpose, provided that the + * above copyright notice and the following two paragraphs appear in + * all copies of this software. + * + * IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE TO ANY PARTY FOR + * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES + * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN + * IF THE COPYRIGHT HOLDER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + * THE COPYRIGHT HOLDER SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, + * BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND + * FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS + * ON AN "AS IS" BASIS, AND THE COPYRIGHT HOLDER HAS NO OBLIGATION TO + * PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. + * + * Google Author(s): Behdad Esfahbod + */ + +#if !defined(HB_H_IN) && !defined(HB_NO_SINGLE_HEADER_ERROR) +#error "Include instead." +#endif + +#ifndef HB_MAP_H +#define HB_MAP_H + +#include "hb-common.h" +#include "hb-set.h" + +HB_BEGIN_DECLS + + +/** + * HB_MAP_VALUE_INVALID: + * + * Unset #hb_map_t value. + * + * Since: 1.7.7 + */ +#define HB_MAP_VALUE_INVALID HB_CODEPOINT_INVALID + +/** + * hb_map_t: + * + * Data type for holding integer-to-integer hash maps. + * + **/ +typedef struct hb_map_t hb_map_t; + + +HB_EXTERN hb_map_t * +hb_map_create (void); + +HB_EXTERN hb_map_t * +hb_map_get_empty (void); + +HB_EXTERN hb_map_t * +hb_map_reference (hb_map_t *map); + +HB_EXTERN void +hb_map_destroy (hb_map_t *map); + +HB_EXTERN hb_bool_t +hb_map_set_user_data (hb_map_t *map, + hb_user_data_key_t *key, + void * data, + hb_destroy_func_t destroy, + hb_bool_t replace); + +HB_EXTERN void * +hb_map_get_user_data (const hb_map_t *map, + hb_user_data_key_t *key); + + +/* Returns false if allocation has failed before */ +HB_EXTERN hb_bool_t +hb_map_allocation_successful (const hb_map_t *map); + +HB_EXTERN hb_map_t * +hb_map_copy (const hb_map_t *map); + +HB_EXTERN void +hb_map_clear (hb_map_t *map); + +HB_EXTERN hb_bool_t +hb_map_is_empty (const hb_map_t *map); + +HB_EXTERN unsigned int +hb_map_get_population (const hb_map_t *map); + +HB_EXTERN hb_bool_t +hb_map_is_equal (const hb_map_t *map, + const hb_map_t *other); + +HB_EXTERN unsigned int +hb_map_hash (const hb_map_t *map); + +HB_EXTERN void +hb_map_set (hb_map_t *map, + hb_codepoint_t key, + hb_codepoint_t value); + +HB_EXTERN hb_codepoint_t +hb_map_get (const hb_map_t *map, + hb_codepoint_t key); + +HB_EXTERN void +hb_map_del (hb_map_t *map, + hb_codepoint_t key); + +HB_EXTERN hb_bool_t +hb_map_has (const hb_map_t *map, + hb_codepoint_t key); + +HB_EXTERN void +hb_map_update (hb_map_t *map, + const hb_map_t *other); + +/* Pass -1 in for idx to get started. */ +HB_EXTERN hb_bool_t +hb_map_next (const hb_map_t *map, + int *idx, + hb_codepoint_t *key, + hb_codepoint_t *value); + +HB_EXTERN void +hb_map_keys (const hb_map_t *map, + hb_set_t *keys); + +HB_EXTERN void +hb_map_values (const hb_map_t *map, + hb_set_t *values); + +HB_END_DECLS + +#endif /* HB_MAP_H */ diff --git a/dependencies/linux64/include/harfbuzz/hb-ot-color.h b/dependencies/linux64/include/harfbuzz/hb-ot-color.h new file mode 100644 index 0000000..22ee497 --- /dev/null +++ b/dependencies/linux64/include/harfbuzz/hb-ot-color.h @@ -0,0 +1,155 @@ +/* + * Copyright © 2016 Google, Inc. + * Copyright © 2018 Khaled Hosny + * Copyright © 2018 Ebrahim Byagowi + * + * This is part of HarfBuzz, a text shaping library. + * + * Permission is hereby granted, without written agreement and without + * license or royalty fees, to use, copy, modify, and distribute this + * software and its documentation for any purpose, provided that the + * above copyright notice and the following two paragraphs appear in + * all copies of this software. + * + * IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE TO ANY PARTY FOR + * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES + * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN + * IF THE COPYRIGHT HOLDER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + * THE COPYRIGHT HOLDER SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, + * BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND + * FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS + * ON AN "AS IS" BASIS, AND THE COPYRIGHT HOLDER HAS NO OBLIGATION TO + * PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. + * + * Google Author(s): Sascha Brawer, Behdad Esfahbod + */ + +#if !defined(HB_OT_H_IN) && !defined(HB_NO_SINGLE_HEADER_ERROR) +#error "Include instead." +#endif + +#ifndef HB_OT_COLOR_H +#define HB_OT_COLOR_H + +#include "hb.h" +#include "hb-ot-name.h" + +HB_BEGIN_DECLS + + +/* + * Color palettes. + */ + +HB_EXTERN hb_bool_t +hb_ot_color_has_palettes (hb_face_t *face); + +HB_EXTERN unsigned int +hb_ot_color_palette_get_count (hb_face_t *face); + +HB_EXTERN hb_ot_name_id_t +hb_ot_color_palette_get_name_id (hb_face_t *face, + unsigned int palette_index); + +HB_EXTERN hb_ot_name_id_t +hb_ot_color_palette_color_get_name_id (hb_face_t *face, + unsigned int color_index); + +/** + * hb_ot_color_palette_flags_t: + * @HB_OT_COLOR_PALETTE_FLAG_DEFAULT: Default indicating that there is nothing special + * to note about a color palette. + * @HB_OT_COLOR_PALETTE_FLAG_USABLE_WITH_LIGHT_BACKGROUND: Flag indicating that the color + * palette is appropriate to use when displaying the font on a light background such as white. + * @HB_OT_COLOR_PALETTE_FLAG_USABLE_WITH_DARK_BACKGROUND: Flag indicating that the color + * palette is appropriate to use when displaying the font on a dark background such as black. + * + * Flags that describe the properties of color palette. + * + * Since: 2.1.0 + */ +typedef enum { /*< flags >*/ + HB_OT_COLOR_PALETTE_FLAG_DEFAULT = 0x00000000u, + HB_OT_COLOR_PALETTE_FLAG_USABLE_WITH_LIGHT_BACKGROUND = 0x00000001u, + HB_OT_COLOR_PALETTE_FLAG_USABLE_WITH_DARK_BACKGROUND = 0x00000002u +} hb_ot_color_palette_flags_t; + +HB_EXTERN hb_ot_color_palette_flags_t +hb_ot_color_palette_get_flags (hb_face_t *face, + unsigned int palette_index); + +HB_EXTERN unsigned int +hb_ot_color_palette_get_colors (hb_face_t *face, + unsigned int palette_index, + unsigned int start_offset, + unsigned int *color_count, /* IN/OUT. May be NULL. */ + hb_color_t *colors /* OUT. May be NULL. */); + + +/* + * Color layers. + */ + +HB_EXTERN hb_bool_t +hb_ot_color_has_layers (hb_face_t *face); + +/** + * hb_ot_color_layer_t: + * @glyph: the glyph ID of the layer + * @color_index: the palette color index of the layer + * + * Pairs of glyph and color index. + * + * A color index of 0xFFFF does not refer to a palette + * color, but indicates that the foreground color should + * be used. + * + * Since: 2.1.0 + **/ +typedef struct hb_ot_color_layer_t { + hb_codepoint_t glyph; + unsigned int color_index; +} hb_ot_color_layer_t; + +HB_EXTERN unsigned int +hb_ot_color_glyph_get_layers (hb_face_t *face, + hb_codepoint_t glyph, + unsigned int start_offset, + unsigned int *layer_count, /* IN/OUT. May be NULL. */ + hb_ot_color_layer_t *layers /* OUT. May be NULL. */); + +/* COLRv1 */ + +HB_EXTERN hb_bool_t +hb_ot_color_has_paint (hb_face_t *face); + +HB_EXTERN hb_bool_t +hb_ot_color_glyph_has_paint (hb_face_t *face, + hb_codepoint_t glyph); + +/* + * SVG + */ + +HB_EXTERN hb_bool_t +hb_ot_color_has_svg (hb_face_t *face); + +HB_EXTERN hb_blob_t * +hb_ot_color_glyph_reference_svg (hb_face_t *face, hb_codepoint_t glyph); + +/* + * PNG: CBDT or sbix + */ + +HB_EXTERN hb_bool_t +hb_ot_color_has_png (hb_face_t *face); + +HB_EXTERN hb_blob_t * +hb_ot_color_glyph_reference_png (hb_font_t *font, hb_codepoint_t glyph); + + +HB_END_DECLS + +#endif /* HB_OT_COLOR_H */ diff --git a/dependencies/linux64/include/harfbuzz/hb-ot-deprecated.h b/dependencies/linux64/include/harfbuzz/hb-ot-deprecated.h new file mode 100644 index 0000000..60672ab --- /dev/null +++ b/dependencies/linux64/include/harfbuzz/hb-ot-deprecated.h @@ -0,0 +1,147 @@ +/* + * Copyright © 2018 Google, Inc. + * + * This is part of HarfBuzz, a text shaping library. + * + * Permission is hereby granted, without written agreement and without + * license or royalty fees, to use, copy, modify, and distribute this + * software and its documentation for any purpose, provided that the + * above copyright notice and the following two paragraphs appear in + * all copies of this software. + * + * IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE TO ANY PARTY FOR + * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES + * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN + * IF THE COPYRIGHT HOLDER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + * THE COPYRIGHT HOLDER SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, + * BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND + * FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS + * ON AN "AS IS" BASIS, AND THE COPYRIGHT HOLDER HAS NO OBLIGATION TO + * PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. + * + * Google Author(s): Behdad Esfahbod + */ + +#if !defined(HB_OT_H_IN) && !defined(HB_NO_SINGLE_HEADER_ERROR) +#error "Include instead." +#endif + +#ifndef HB_OT_DEPRECATED_H +#define HB_OT_DEPRECATED_H + +#include "hb.h" +#include "hb-ot-name.h" + + +HB_BEGIN_DECLS + +#ifndef HB_DISABLE_DEPRECATED + + +/* https://github.com/harfbuzz/harfbuzz/issues/1734 */ +/** + * HB_MATH_GLYPH_PART_FLAG_EXTENDER: + * + * Use #HB_OT_MATH_GLYPH_PART_FLAG_EXTENDER instead. + * + * Deprecated: 2.5.1 + */ +#define HB_MATH_GLYPH_PART_FLAG_EXTENDER HB_OT_MATH_GLYPH_PART_FLAG_EXTENDER + +/* https://github.com/harfbuzz/harfbuzz/pull/3417 */ +/** + * HB_OT_MATH_SCRIPT: + * + * Use #HB_SCRIPT_MATH or #HB_OT_TAG_MATH_SCRIPT instead. + * + * Previous versions of this documentation recommended passing + * #HB_OT_MATH_SCRIPT to hb_buffer_set_script() to enable math shaping, but this + * usage is no longer supported. Use #HB_SCRIPT_MATH instead. + * + * Since: 1.3.3 + * Deprecated: 3.4.0 + */ +#define HB_OT_MATH_SCRIPT HB_OT_TAG_MATH_SCRIPT + + +/* Like hb_ot_layout_table_find_script, but takes zero-terminated array of scripts to test */ +HB_DEPRECATED_FOR (hb_ot_layout_table_select_script) +HB_EXTERN hb_bool_t +hb_ot_layout_table_choose_script (hb_face_t *face, + hb_tag_t table_tag, + const hb_tag_t *script_tags, + unsigned int *script_index, + hb_tag_t *chosen_script); + +HB_DEPRECATED_FOR (hb_ot_layout_script_select_language) +HB_EXTERN hb_bool_t +hb_ot_layout_script_find_language (hb_face_t *face, + hb_tag_t table_tag, + unsigned int script_index, + hb_tag_t language_tag, + unsigned int *language_index); + +HB_DEPRECATED_FOR (hb_ot_tags_from_script_and_language) +HB_EXTERN void +hb_ot_tags_from_script (hb_script_t script, + hb_tag_t *script_tag_1, + hb_tag_t *script_tag_2); + +HB_DEPRECATED_FOR (hb_ot_tags_from_script_and_language) +HB_EXTERN hb_tag_t +hb_ot_tag_from_language (hb_language_t language); + + +/** + * HB_OT_VAR_NO_AXIS_INDEX: + * + * Do not use. + * + * Since: 1.4.2 + * Deprecated: 2.2.0 + */ +#define HB_OT_VAR_NO_AXIS_INDEX 0xFFFFFFFFu + +/** + * hb_ot_var_axis_t: + * @tag: axis tag + * @name_id: axis name identifier + * @min_value: minimum value of the axis + * @default_value: default value of the axis + * @max_value: maximum value of the axis + * + * Use #hb_ot_var_axis_info_t instead. + * + * Since: 1.4.2 + * Deprecated: 2.2.0 + */ +typedef struct hb_ot_var_axis_t { + hb_tag_t tag; + hb_ot_name_id_t name_id; + float min_value; + float default_value; + float max_value; +} hb_ot_var_axis_t; + +HB_DEPRECATED_FOR (hb_ot_var_get_axis_infos) +HB_EXTERN unsigned int +hb_ot_var_get_axes (hb_face_t *face, + unsigned int start_offset, + unsigned int *axes_count /* IN/OUT */, + hb_ot_var_axis_t *axes_array /* OUT */); + +HB_DEPRECATED_FOR (hb_ot_var_find_axis_info) +HB_EXTERN hb_bool_t +hb_ot_var_find_axis (hb_face_t *face, + hb_tag_t axis_tag, + unsigned int *axis_index, + hb_ot_var_axis_t *axis_info); + + +#endif + +HB_END_DECLS + +#endif /* HB_OT_DEPRECATED_H */ diff --git a/dependencies/linux64/include/harfbuzz/hb-ot-font.h b/dependencies/linux64/include/harfbuzz/hb-ot-font.h new file mode 100644 index 0000000..e7959d1 --- /dev/null +++ b/dependencies/linux64/include/harfbuzz/hb-ot-font.h @@ -0,0 +1,45 @@ +/* + * Copyright © 2014 Google, Inc. + * + * This is part of HarfBuzz, a text shaping library. + * + * Permission is hereby granted, without written agreement and without + * license or royalty fees, to use, copy, modify, and distribute this + * software and its documentation for any purpose, provided that the + * above copyright notice and the following two paragraphs appear in + * all copies of this software. + * + * IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE TO ANY PARTY FOR + * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES + * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN + * IF THE COPYRIGHT HOLDER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + * THE COPYRIGHT HOLDER SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, + * BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND + * FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS + * ON AN "AS IS" BASIS, AND THE COPYRIGHT HOLDER HAS NO OBLIGATION TO + * PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. + * + * Google Author(s): Behdad Esfahbod, Roozbeh Pournader + */ + +#if !defined(HB_OT_H_IN) && !defined(HB_NO_SINGLE_HEADER_ERROR) +#error "Include instead." +#endif + +#ifndef HB_OT_FONT_H +#define HB_OT_FONT_H + +#include "hb.h" + +HB_BEGIN_DECLS + + +HB_EXTERN void +hb_ot_font_set_funcs (hb_font_t *font); + + +HB_END_DECLS + +#endif /* HB_OT_FONT_H */ diff --git a/dependencies/linux64/include/harfbuzz/hb-ot-layout.h b/dependencies/linux64/include/harfbuzz/hb-ot-layout.h new file mode 100644 index 0000000..386b98d --- /dev/null +++ b/dependencies/linux64/include/harfbuzz/hb-ot-layout.h @@ -0,0 +1,549 @@ +/* + * Copyright © 2007,2008,2009 Red Hat, Inc. + * + * This is part of HarfBuzz, a text shaping library. + * + * Permission is hereby granted, without written agreement and without + * license or royalty fees, to use, copy, modify, and distribute this + * software and its documentation for any purpose, provided that the + * above copyright notice and the following two paragraphs appear in + * all copies of this software. + * + * IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE TO ANY PARTY FOR + * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES + * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN + * IF THE COPYRIGHT HOLDER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + * THE COPYRIGHT HOLDER SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, + * BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND + * FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS + * ON AN "AS IS" BASIS, AND THE COPYRIGHT HOLDER HAS NO OBLIGATION TO + * PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. + * + * Red Hat Author(s): Behdad Esfahbod + */ + +#if !defined(HB_OT_H_IN) && !defined(HB_NO_SINGLE_HEADER_ERROR) +#error "Include instead." +#endif + +#ifndef HB_OT_LAYOUT_H +#define HB_OT_LAYOUT_H + +#include "hb.h" + +#include "hb-ot-name.h" + +HB_BEGIN_DECLS + + +/** + * HB_OT_TAG_BASE: + * + * OpenType [Baseline Table](https://docs.microsoft.com/en-us/typography/opentype/spec/base). + */ +#define HB_OT_TAG_BASE HB_TAG('B','A','S','E') +/** + * HB_OT_TAG_GDEF: + * + * OpenType [Glyph Definition Table](https://docs.microsoft.com/en-us/typography/opentype/spec/gdef). + */ +#define HB_OT_TAG_GDEF HB_TAG('G','D','E','F') +/** + * HB_OT_TAG_GSUB: + * + * OpenType [Glyph Substitution Table](https://docs.microsoft.com/en-us/typography/opentype/spec/gsub). + */ +#define HB_OT_TAG_GSUB HB_TAG('G','S','U','B') +/** + * HB_OT_TAG_GPOS: + * + * OpenType [Glyph Positioning Table](https://docs.microsoft.com/en-us/typography/opentype/spec/gpos). + */ +#define HB_OT_TAG_GPOS HB_TAG('G','P','O','S') +/** + * HB_OT_TAG_JSTF: + * + * OpenType [Justification Table](https://docs.microsoft.com/en-us/typography/opentype/spec/jstf). + */ +#define HB_OT_TAG_JSTF HB_TAG('J','S','T','F') + + +/* + * Script & Language tags. + */ + +/** + * HB_OT_TAG_DEFAULT_SCRIPT: + * + * OpenType script tag, `DFLT`, for features that are not script-specific. + * + */ +#define HB_OT_TAG_DEFAULT_SCRIPT HB_TAG ('D', 'F', 'L', 'T') +/** + * HB_OT_TAG_DEFAULT_LANGUAGE: + * + * OpenType language tag, `dflt`. Not a valid language tag, but some fonts + * mistakenly use it. + */ +#define HB_OT_TAG_DEFAULT_LANGUAGE HB_TAG ('d', 'f', 'l', 't') + +/** + * HB_OT_MAX_TAGS_PER_SCRIPT: + * + * Maximum number of OpenType tags that can correspond to a give #hb_script_t. + * + * Since: 2.0.0 + **/ +#define HB_OT_MAX_TAGS_PER_SCRIPT 3u +/** + * HB_OT_MAX_TAGS_PER_LANGUAGE: + * + * Maximum number of OpenType tags that can correspond to a give #hb_language_t. + * + * Since: 2.0.0 + **/ +#define HB_OT_MAX_TAGS_PER_LANGUAGE 3u + +HB_EXTERN void +hb_ot_tags_from_script_and_language (hb_script_t script, + hb_language_t language, + unsigned int *script_count /* IN/OUT */, + hb_tag_t *script_tags /* OUT */, + unsigned int *language_count /* IN/OUT */, + hb_tag_t *language_tags /* OUT */); + +HB_EXTERN hb_script_t +hb_ot_tag_to_script (hb_tag_t tag); + +HB_EXTERN hb_language_t +hb_ot_tag_to_language (hb_tag_t tag); + +HB_EXTERN void +hb_ot_tags_to_script_and_language (hb_tag_t script_tag, + hb_tag_t language_tag, + hb_script_t *script /* OUT */, + hb_language_t *language /* OUT */); + + +/* + * GDEF + */ + +HB_EXTERN hb_bool_t +hb_ot_layout_has_glyph_classes (hb_face_t *face); + +/** + * hb_ot_layout_glyph_class_t: + * @HB_OT_LAYOUT_GLYPH_CLASS_UNCLASSIFIED: Glyphs not matching the other classifications + * @HB_OT_LAYOUT_GLYPH_CLASS_BASE_GLYPH: Spacing, single characters, capable of accepting marks + * @HB_OT_LAYOUT_GLYPH_CLASS_LIGATURE: Glyphs that represent ligation of multiple characters + * @HB_OT_LAYOUT_GLYPH_CLASS_MARK: Non-spacing, combining glyphs that represent marks + * @HB_OT_LAYOUT_GLYPH_CLASS_COMPONENT: Spacing glyphs that represent part of a single character + * + * The GDEF classes defined for glyphs. + * + **/ +typedef enum { + HB_OT_LAYOUT_GLYPH_CLASS_UNCLASSIFIED = 0, + HB_OT_LAYOUT_GLYPH_CLASS_BASE_GLYPH = 1, + HB_OT_LAYOUT_GLYPH_CLASS_LIGATURE = 2, + HB_OT_LAYOUT_GLYPH_CLASS_MARK = 3, + HB_OT_LAYOUT_GLYPH_CLASS_COMPONENT = 4 +} hb_ot_layout_glyph_class_t; + +HB_EXTERN hb_ot_layout_glyph_class_t +hb_ot_layout_get_glyph_class (hb_face_t *face, + hb_codepoint_t glyph); + +HB_EXTERN void +hb_ot_layout_get_glyphs_in_class (hb_face_t *face, + hb_ot_layout_glyph_class_t klass, + hb_set_t *glyphs /* OUT */); + +/* Not that useful. Provides list of attach points for a glyph that a + * client may want to cache */ +HB_EXTERN unsigned int +hb_ot_layout_get_attach_points (hb_face_t *face, + hb_codepoint_t glyph, + unsigned int start_offset, + unsigned int *point_count /* IN/OUT */, + unsigned int *point_array /* OUT */); + +/* Ligature caret positions */ +HB_EXTERN unsigned int +hb_ot_layout_get_ligature_carets (hb_font_t *font, + hb_direction_t direction, + hb_codepoint_t glyph, + unsigned int start_offset, + unsigned int *caret_count /* IN/OUT */, + hb_position_t *caret_array /* OUT */); + + +/* + * GSUB/GPOS feature query and enumeration interface + */ + +/** + * HB_OT_LAYOUT_NO_SCRIPT_INDEX: + * + * Special value for script index indicating unsupported script. + */ +#define HB_OT_LAYOUT_NO_SCRIPT_INDEX 0xFFFFu +/** + * HB_OT_LAYOUT_NO_FEATURE_INDEX: + * + * Special value for feature index indicating unsupported feature. + */ +#define HB_OT_LAYOUT_NO_FEATURE_INDEX 0xFFFFu +/** + * HB_OT_LAYOUT_DEFAULT_LANGUAGE_INDEX: + * + * Special value for language index indicating default or unsupported language. + */ +#define HB_OT_LAYOUT_DEFAULT_LANGUAGE_INDEX 0xFFFFu +/** + * HB_OT_LAYOUT_NO_VARIATIONS_INDEX: + * + * Special value for variations index indicating unsupported variation. + */ +#define HB_OT_LAYOUT_NO_VARIATIONS_INDEX 0xFFFFFFFFu + +HB_EXTERN unsigned int +hb_ot_layout_table_get_script_tags (hb_face_t *face, + hb_tag_t table_tag, + unsigned int start_offset, + unsigned int *script_count /* IN/OUT */, + hb_tag_t *script_tags /* OUT */); + +HB_EXTERN hb_bool_t +hb_ot_layout_table_find_script (hb_face_t *face, + hb_tag_t table_tag, + hb_tag_t script_tag, + unsigned int *script_index /* OUT */); + +HB_EXTERN hb_bool_t +hb_ot_layout_table_select_script (hb_face_t *face, + hb_tag_t table_tag, + unsigned int script_count, + const hb_tag_t *script_tags, + unsigned int *script_index /* OUT */, + hb_tag_t *chosen_script /* OUT */); + +HB_EXTERN unsigned int +hb_ot_layout_table_get_feature_tags (hb_face_t *face, + hb_tag_t table_tag, + unsigned int start_offset, + unsigned int *feature_count /* IN/OUT */, + hb_tag_t *feature_tags /* OUT */); + +HB_EXTERN unsigned int +hb_ot_layout_script_get_language_tags (hb_face_t *face, + hb_tag_t table_tag, + unsigned int script_index, + unsigned int start_offset, + unsigned int *language_count /* IN/OUT */, + hb_tag_t *language_tags /* OUT */); + +HB_EXTERN hb_bool_t +hb_ot_layout_script_select_language (hb_face_t *face, + hb_tag_t table_tag, + unsigned int script_index, + unsigned int language_count, + const hb_tag_t *language_tags, + unsigned int *language_index /* OUT */); + +HB_EXTERN hb_bool_t +hb_ot_layout_script_select_language2 (hb_face_t *face, + hb_tag_t table_tag, + unsigned int script_index, + unsigned int language_count, + const hb_tag_t *language_tags, + unsigned int *language_index /* OUT */, + hb_tag_t *chosen_language /* OUT */); + +HB_EXTERN hb_bool_t +hb_ot_layout_language_get_required_feature_index (hb_face_t *face, + hb_tag_t table_tag, + unsigned int script_index, + unsigned int language_index, + unsigned int *feature_index /* OUT */); + +HB_EXTERN hb_bool_t +hb_ot_layout_language_get_required_feature (hb_face_t *face, + hb_tag_t table_tag, + unsigned int script_index, + unsigned int language_index, + unsigned int *feature_index /* OUT */, + hb_tag_t *feature_tag /* OUT */); + +HB_EXTERN unsigned int +hb_ot_layout_language_get_feature_indexes (hb_face_t *face, + hb_tag_t table_tag, + unsigned int script_index, + unsigned int language_index, + unsigned int start_offset, + unsigned int *feature_count /* IN/OUT */, + unsigned int *feature_indexes /* OUT */); + +HB_EXTERN unsigned int +hb_ot_layout_language_get_feature_tags (hb_face_t *face, + hb_tag_t table_tag, + unsigned int script_index, + unsigned int language_index, + unsigned int start_offset, + unsigned int *feature_count /* IN/OUT */, + hb_tag_t *feature_tags /* OUT */); + +HB_EXTERN hb_bool_t +hb_ot_layout_language_find_feature (hb_face_t *face, + hb_tag_t table_tag, + unsigned int script_index, + unsigned int language_index, + hb_tag_t feature_tag, + unsigned int *feature_index /* OUT */); + +HB_EXTERN unsigned int +hb_ot_layout_feature_get_lookups (hb_face_t *face, + hb_tag_t table_tag, + unsigned int feature_index, + unsigned int start_offset, + unsigned int *lookup_count /* IN/OUT */, + unsigned int *lookup_indexes /* OUT */); + +HB_EXTERN unsigned int +hb_ot_layout_table_get_lookup_count (hb_face_t *face, + hb_tag_t table_tag); + +HB_EXTERN void +hb_ot_layout_collect_features (hb_face_t *face, + hb_tag_t table_tag, + const hb_tag_t *scripts, + const hb_tag_t *languages, + const hb_tag_t *features, + hb_set_t *feature_indexes /* OUT */); + +HB_EXTERN void +hb_ot_layout_collect_features_map (hb_face_t *face, + hb_tag_t table_tag, + unsigned script_index, + unsigned language_index, + hb_map_t *feature_map /* OUT */); + +HB_EXTERN void +hb_ot_layout_collect_lookups (hb_face_t *face, + hb_tag_t table_tag, + const hb_tag_t *scripts, + const hb_tag_t *languages, + const hb_tag_t *features, + hb_set_t *lookup_indexes /* OUT */); + +HB_EXTERN void +hb_ot_layout_lookup_collect_glyphs (hb_face_t *face, + hb_tag_t table_tag, + unsigned int lookup_index, + hb_set_t *glyphs_before, /* OUT. May be NULL */ + hb_set_t *glyphs_input, /* OUT. May be NULL */ + hb_set_t *glyphs_after, /* OUT. May be NULL */ + hb_set_t *glyphs_output /* OUT. May be NULL */); + + +/* Variations support */ + +HB_EXTERN hb_bool_t +hb_ot_layout_table_find_feature_variations (hb_face_t *face, + hb_tag_t table_tag, + const int *coords, + unsigned int num_coords, + unsigned int *variations_index /* out */); + +HB_EXTERN unsigned int +hb_ot_layout_feature_with_variations_get_lookups (hb_face_t *face, + hb_tag_t table_tag, + unsigned int feature_index, + unsigned int variations_index, + unsigned int start_offset, + unsigned int *lookup_count /* IN/OUT */, + unsigned int *lookup_indexes /* OUT */); + + +/* + * GSUB + */ + +HB_EXTERN hb_bool_t +hb_ot_layout_has_substitution (hb_face_t *face); + +HB_EXTERN unsigned +hb_ot_layout_lookup_get_glyph_alternates (hb_face_t *face, + unsigned lookup_index, + hb_codepoint_t glyph, + unsigned start_offset, + unsigned *alternate_count /* IN/OUT */, + hb_codepoint_t *alternate_glyphs /* OUT */); + +HB_EXTERN hb_bool_t +hb_ot_layout_lookup_would_substitute (hb_face_t *face, + unsigned int lookup_index, + const hb_codepoint_t *glyphs, + unsigned int glyphs_length, + hb_bool_t zero_context); + +HB_EXTERN void +hb_ot_layout_lookup_substitute_closure (hb_face_t *face, + unsigned int lookup_index, + hb_set_t *glyphs + /*TODO , hb_bool_t inclusive */); + +HB_EXTERN void +hb_ot_layout_lookups_substitute_closure (hb_face_t *face, + const hb_set_t *lookups, + hb_set_t *glyphs); + + +/* + * GPOS + */ + +HB_EXTERN hb_bool_t +hb_ot_layout_has_positioning (hb_face_t *face); + +/* Optical 'size' feature info. Returns true if found. + * https://docs.microsoft.com/en-us/typography/opentype/spec/features_pt#size */ +HB_EXTERN hb_bool_t +hb_ot_layout_get_size_params (hb_face_t *face, + unsigned int *design_size, /* OUT. May be NULL */ + unsigned int *subfamily_id, /* OUT. May be NULL */ + hb_ot_name_id_t *subfamily_name_id, /* OUT. May be NULL */ + unsigned int *range_start, /* OUT. May be NULL */ + unsigned int *range_end /* OUT. May be NULL */); + +HB_EXTERN hb_position_t +hb_ot_layout_lookup_get_optical_bound (hb_font_t *font, + unsigned lookup_index, + hb_direction_t direction, + hb_codepoint_t glyph); + + +/* + * GSUB/GPOS + */ + +HB_EXTERN hb_bool_t +hb_ot_layout_feature_get_name_ids (hb_face_t *face, + hb_tag_t table_tag, + unsigned int feature_index, + hb_ot_name_id_t *label_id /* OUT. May be NULL */, + hb_ot_name_id_t *tooltip_id /* OUT. May be NULL */, + hb_ot_name_id_t *sample_id /* OUT. May be NULL */, + unsigned int *num_named_parameters /* OUT. May be NULL */, + hb_ot_name_id_t *first_param_id /* OUT. May be NULL */); + + +HB_EXTERN unsigned int +hb_ot_layout_feature_get_characters (hb_face_t *face, + hb_tag_t table_tag, + unsigned int feature_index, + unsigned int start_offset, + unsigned int *char_count /* IN/OUT. May be NULL */, + hb_codepoint_t *characters /* OUT. May be NULL */); + + +/* + * BASE + */ + +HB_EXTERN hb_bool_t +hb_ot_layout_get_font_extents (hb_font_t *font, + hb_direction_t direction, + hb_tag_t script_tag, + hb_tag_t language_tag, + hb_font_extents_t *extents); + +HB_EXTERN hb_bool_t +hb_ot_layout_get_font_extents2 (hb_font_t *font, + hb_direction_t direction, + hb_script_t script, + hb_language_t language, + hb_font_extents_t *extents); + +/** + * hb_ot_layout_baseline_tag_t: + * @HB_OT_LAYOUT_BASELINE_TAG_ROMAN: The baseline used by alphabetic scripts such as Latin, Cyrillic and Greek. + * In vertical writing mode, the alphabetic baseline for characters rotated 90 degrees clockwise. + * (This would not apply to alphabetic characters that remain upright in vertical writing mode, since these + * characters are not rotated.) + * @HB_OT_LAYOUT_BASELINE_TAG_HANGING: The hanging baseline. In horizontal direction, this is the horizontal + * line from which syllables seem, to hang in Tibetan and other similar scripts. In vertical writing mode, + * for Tibetan (or some other similar script) characters rotated 90 degrees clockwise. + * @HB_OT_LAYOUT_BASELINE_TAG_IDEO_FACE_BOTTOM_OR_LEFT: Ideographic character face bottom or left edge, + * if the direction is horizontal or vertical, respectively. + * @HB_OT_LAYOUT_BASELINE_TAG_IDEO_FACE_TOP_OR_RIGHT: Ideographic character face top or right edge, + * if the direction is horizontal or vertical, respectively. + * @HB_OT_LAYOUT_BASELINE_TAG_IDEO_FACE_CENTRAL: The center of the ideographic character face. Since: 4.0.0 + * @HB_OT_LAYOUT_BASELINE_TAG_IDEO_EMBOX_BOTTOM_OR_LEFT: Ideographic em-box bottom or left edge, + * if the direction is horizontal or vertical, respectively. + * @HB_OT_LAYOUT_BASELINE_TAG_IDEO_EMBOX_TOP_OR_RIGHT: Ideographic em-box top or right edge baseline, + * @HB_OT_LAYOUT_BASELINE_TAG_IDEO_EMBOX_CENTRAL: The center of the ideographic em-box. Since: 4.0.0 + * if the direction is horizontal or vertical, respectively. + * @HB_OT_LAYOUT_BASELINE_TAG_MATH: The baseline about which mathematical characters are centered. + * In vertical writing mode when mathematical characters rotated 90 degrees clockwise, are centered. + * + * Baseline tags from [Baseline Tags](https://docs.microsoft.com/en-us/typography/opentype/spec/baselinetags) registry. + * + * Since: 2.6.0 + */ +typedef enum { + HB_OT_LAYOUT_BASELINE_TAG_ROMAN = HB_TAG ('r','o','m','n'), + HB_OT_LAYOUT_BASELINE_TAG_HANGING = HB_TAG ('h','a','n','g'), + HB_OT_LAYOUT_BASELINE_TAG_IDEO_FACE_BOTTOM_OR_LEFT = HB_TAG ('i','c','f','b'), + HB_OT_LAYOUT_BASELINE_TAG_IDEO_FACE_TOP_OR_RIGHT = HB_TAG ('i','c','f','t'), + HB_OT_LAYOUT_BASELINE_TAG_IDEO_FACE_CENTRAL = HB_TAG ('I','c','f','c'), + HB_OT_LAYOUT_BASELINE_TAG_IDEO_EMBOX_BOTTOM_OR_LEFT = HB_TAG ('i','d','e','o'), + HB_OT_LAYOUT_BASELINE_TAG_IDEO_EMBOX_TOP_OR_RIGHT = HB_TAG ('i','d','t','p'), + HB_OT_LAYOUT_BASELINE_TAG_IDEO_EMBOX_CENTRAL = HB_TAG ('I','d','c','e'), + HB_OT_LAYOUT_BASELINE_TAG_MATH = HB_TAG ('m','a','t','h'), + + /*< private >*/ + _HB_OT_LAYOUT_BASELINE_TAG_MAX_VALUE = HB_TAG_MAX_SIGNED /*< skip >*/ +} hb_ot_layout_baseline_tag_t; + +HB_EXTERN hb_ot_layout_baseline_tag_t +hb_ot_layout_get_horizontal_baseline_tag_for_script (hb_script_t script); + +HB_EXTERN hb_bool_t +hb_ot_layout_get_baseline (hb_font_t *font, + hb_ot_layout_baseline_tag_t baseline_tag, + hb_direction_t direction, + hb_tag_t script_tag, + hb_tag_t language_tag, + hb_position_t *coord /* OUT. May be NULL. */); + +HB_EXTERN hb_bool_t +hb_ot_layout_get_baseline2 (hb_font_t *font, + hb_ot_layout_baseline_tag_t baseline_tag, + hb_direction_t direction, + hb_script_t script, + hb_language_t language, + hb_position_t *coord /* OUT. May be NULL. */); + +HB_EXTERN void +hb_ot_layout_get_baseline_with_fallback (hb_font_t *font, + hb_ot_layout_baseline_tag_t baseline_tag, + hb_direction_t direction, + hb_tag_t script_tag, + hb_tag_t language_tag, + hb_position_t *coord /* OUT */); + +HB_EXTERN void +hb_ot_layout_get_baseline_with_fallback2 (hb_font_t *font, + hb_ot_layout_baseline_tag_t baseline_tag, + hb_direction_t direction, + hb_script_t script, + hb_language_t language, + hb_position_t *coord /* OUT */); + +HB_END_DECLS + +#endif /* HB_OT_LAYOUT_H */ diff --git a/dependencies/linux64/include/harfbuzz/hb-ot-math.h b/dependencies/linux64/include/harfbuzz/hb-ot-math.h new file mode 100644 index 0000000..1378a06 --- /dev/null +++ b/dependencies/linux64/include/harfbuzz/hb-ot-math.h @@ -0,0 +1,333 @@ +/* + * Copyright © 2016 Igalia S.L. + * + * This is part of HarfBuzz, a text shaping library. + * + * Permission is hereby granted, without written agreement and without + * license or royalty fees, to use, copy, modify, and distribute this + * software and its documentation for any purpose, provided that the + * above copyright notice and the following two paragraphs appear in + * all copies of this software. + * + * IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE TO ANY PARTY FOR + * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES + * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN + * IF THE COPYRIGHT HOLDER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + * THE COPYRIGHT HOLDER SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, + * BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND + * FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS + * ON AN "AS IS" BASIS, AND THE COPYRIGHT HOLDER HAS NO OBLIGATION TO + * PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. + * + * Igalia Author(s): Frédéric Wang + */ + +#if !defined(HB_OT_H_IN) && !defined(HB_NO_SINGLE_HEADER_ERROR) +#error "Include instead." +#endif + +#ifndef HB_OT_MATH_H +#define HB_OT_MATH_H + +#include "hb.h" + +HB_BEGIN_DECLS + + +/* + * MATH + */ + +/** + * HB_OT_TAG_MATH: + * + * OpenType [Mathematical Typesetting Table](https://docs.microsoft.com/en-us/typography/opentype/spec/math). + * + * Since: 1.3.3 + */ +#define HB_OT_TAG_MATH HB_TAG('M','A','T','H') + +/** + * HB_OT_TAG_MATH_SCRIPT: + * + * OpenType script tag, `math`, for features specific to math shaping. + * + * #HB_OT_TAG_MATH_SCRIPT is not a valid #hb_script_t and should only be + * used with functions that accept raw OpenType script tags, such as + * #hb_ot_layout_collect_features. In other cases, #HB_SCRIPT_MATH should be + * used instead. + * + * Since: 3.4.0 + */ +#define HB_OT_TAG_MATH_SCRIPT HB_TAG('m','a','t','h') + +/* Types */ + +/** + * hb_ot_math_constant_t: + * @HB_OT_MATH_CONSTANT_SCRIPT_PERCENT_SCALE_DOWN: scriptPercentScaleDown + * @HB_OT_MATH_CONSTANT_SCRIPT_SCRIPT_PERCENT_SCALE_DOWN: scriptScriptPercentScaleDown + * @HB_OT_MATH_CONSTANT_DELIMITED_SUB_FORMULA_MIN_HEIGHT: delimitedSubFormulaMinHeight + * @HB_OT_MATH_CONSTANT_DISPLAY_OPERATOR_MIN_HEIGHT: displayOperatorMinHeight + * @HB_OT_MATH_CONSTANT_MATH_LEADING: mathLeading + * @HB_OT_MATH_CONSTANT_AXIS_HEIGHT: axisHeight + * @HB_OT_MATH_CONSTANT_ACCENT_BASE_HEIGHT: accentBaseHeight + * @HB_OT_MATH_CONSTANT_FLATTENED_ACCENT_BASE_HEIGHT: flattenedAccentBaseHeight + * @HB_OT_MATH_CONSTANT_SUBSCRIPT_SHIFT_DOWN: subscriptShiftDown + * @HB_OT_MATH_CONSTANT_SUBSCRIPT_TOP_MAX: subscriptTopMax + * @HB_OT_MATH_CONSTANT_SUBSCRIPT_BASELINE_DROP_MIN: subscriptBaselineDropMin + * @HB_OT_MATH_CONSTANT_SUPERSCRIPT_SHIFT_UP: superscriptShiftUp + * @HB_OT_MATH_CONSTANT_SUPERSCRIPT_SHIFT_UP_CRAMPED: superscriptShiftUpCramped + * @HB_OT_MATH_CONSTANT_SUPERSCRIPT_BOTTOM_MIN: superscriptBottomMin + * @HB_OT_MATH_CONSTANT_SUPERSCRIPT_BASELINE_DROP_MAX: superscriptBaselineDropMax + * @HB_OT_MATH_CONSTANT_SUB_SUPERSCRIPT_GAP_MIN: subSuperscriptGapMin + * @HB_OT_MATH_CONSTANT_SUPERSCRIPT_BOTTOM_MAX_WITH_SUBSCRIPT: superscriptBottomMaxWithSubscript + * @HB_OT_MATH_CONSTANT_SPACE_AFTER_SCRIPT: spaceAfterScript + * @HB_OT_MATH_CONSTANT_UPPER_LIMIT_GAP_MIN: upperLimitGapMin + * @HB_OT_MATH_CONSTANT_UPPER_LIMIT_BASELINE_RISE_MIN: upperLimitBaselineRiseMin + * @HB_OT_MATH_CONSTANT_LOWER_LIMIT_GAP_MIN: lowerLimitGapMin + * @HB_OT_MATH_CONSTANT_LOWER_LIMIT_BASELINE_DROP_MIN: lowerLimitBaselineDropMin + * @HB_OT_MATH_CONSTANT_STACK_TOP_SHIFT_UP: stackTopShiftUp + * @HB_OT_MATH_CONSTANT_STACK_TOP_DISPLAY_STYLE_SHIFT_UP: stackTopDisplayStyleShiftUp + * @HB_OT_MATH_CONSTANT_STACK_BOTTOM_SHIFT_DOWN: stackBottomShiftDown + * @HB_OT_MATH_CONSTANT_STACK_BOTTOM_DISPLAY_STYLE_SHIFT_DOWN: stackBottomDisplayStyleShiftDown + * @HB_OT_MATH_CONSTANT_STACK_GAP_MIN: stackGapMin + * @HB_OT_MATH_CONSTANT_STACK_DISPLAY_STYLE_GAP_MIN: stackDisplayStyleGapMin + * @HB_OT_MATH_CONSTANT_STRETCH_STACK_TOP_SHIFT_UP: stretchStackTopShiftUp + * @HB_OT_MATH_CONSTANT_STRETCH_STACK_BOTTOM_SHIFT_DOWN: stretchStackBottomShiftDown + * @HB_OT_MATH_CONSTANT_STRETCH_STACK_GAP_ABOVE_MIN: stretchStackGapAboveMin + * @HB_OT_MATH_CONSTANT_STRETCH_STACK_GAP_BELOW_MIN: stretchStackGapBelowMin + * @HB_OT_MATH_CONSTANT_FRACTION_NUMERATOR_SHIFT_UP: fractionNumeratorShiftUp + * @HB_OT_MATH_CONSTANT_FRACTION_NUMERATOR_DISPLAY_STYLE_SHIFT_UP: fractionNumeratorDisplayStyleShiftUp + * @HB_OT_MATH_CONSTANT_FRACTION_DENOMINATOR_SHIFT_DOWN: fractionDenominatorShiftDown + * @HB_OT_MATH_CONSTANT_FRACTION_DENOMINATOR_DISPLAY_STYLE_SHIFT_DOWN: fractionDenominatorDisplayStyleShiftDown + * @HB_OT_MATH_CONSTANT_FRACTION_NUMERATOR_GAP_MIN: fractionNumeratorGapMin + * @HB_OT_MATH_CONSTANT_FRACTION_NUM_DISPLAY_STYLE_GAP_MIN: fractionNumDisplayStyleGapMin + * @HB_OT_MATH_CONSTANT_FRACTION_RULE_THICKNESS: fractionRuleThickness + * @HB_OT_MATH_CONSTANT_FRACTION_DENOMINATOR_GAP_MIN: fractionDenominatorGapMin + * @HB_OT_MATH_CONSTANT_FRACTION_DENOM_DISPLAY_STYLE_GAP_MIN: fractionDenomDisplayStyleGapMin + * @HB_OT_MATH_CONSTANT_SKEWED_FRACTION_HORIZONTAL_GAP: skewedFractionHorizontalGap + * @HB_OT_MATH_CONSTANT_SKEWED_FRACTION_VERTICAL_GAP: skewedFractionVerticalGap + * @HB_OT_MATH_CONSTANT_OVERBAR_VERTICAL_GAP: overbarVerticalGap + * @HB_OT_MATH_CONSTANT_OVERBAR_RULE_THICKNESS: overbarRuleThickness + * @HB_OT_MATH_CONSTANT_OVERBAR_EXTRA_ASCENDER: overbarExtraAscender + * @HB_OT_MATH_CONSTANT_UNDERBAR_VERTICAL_GAP: underbarVerticalGap + * @HB_OT_MATH_CONSTANT_UNDERBAR_RULE_THICKNESS: underbarRuleThickness + * @HB_OT_MATH_CONSTANT_UNDERBAR_EXTRA_DESCENDER: underbarExtraDescender + * @HB_OT_MATH_CONSTANT_RADICAL_VERTICAL_GAP: radicalVerticalGap + * @HB_OT_MATH_CONSTANT_RADICAL_DISPLAY_STYLE_VERTICAL_GAP: radicalDisplayStyleVerticalGap + * @HB_OT_MATH_CONSTANT_RADICAL_RULE_THICKNESS: radicalRuleThickness + * @HB_OT_MATH_CONSTANT_RADICAL_EXTRA_ASCENDER: radicalExtraAscender + * @HB_OT_MATH_CONSTANT_RADICAL_KERN_BEFORE_DEGREE: radicalKernBeforeDegree + * @HB_OT_MATH_CONSTANT_RADICAL_KERN_AFTER_DEGREE: radicalKernAfterDegree + * @HB_OT_MATH_CONSTANT_RADICAL_DEGREE_BOTTOM_RAISE_PERCENT: radicalDegreeBottomRaisePercent + * + * The 'MATH' table constants, refer to + * [OpenType documentation](https://docs.microsoft.com/en-us/typography/opentype/spec/math#mathconstants-table) + * For more explanations. + * + * Since: 1.3.3 + */ +typedef enum { + HB_OT_MATH_CONSTANT_SCRIPT_PERCENT_SCALE_DOWN = 0, + HB_OT_MATH_CONSTANT_SCRIPT_SCRIPT_PERCENT_SCALE_DOWN = 1, + HB_OT_MATH_CONSTANT_DELIMITED_SUB_FORMULA_MIN_HEIGHT = 2, + HB_OT_MATH_CONSTANT_DISPLAY_OPERATOR_MIN_HEIGHT = 3, + HB_OT_MATH_CONSTANT_MATH_LEADING = 4, + HB_OT_MATH_CONSTANT_AXIS_HEIGHT = 5, + HB_OT_MATH_CONSTANT_ACCENT_BASE_HEIGHT = 6, + HB_OT_MATH_CONSTANT_FLATTENED_ACCENT_BASE_HEIGHT = 7, + HB_OT_MATH_CONSTANT_SUBSCRIPT_SHIFT_DOWN = 8, + HB_OT_MATH_CONSTANT_SUBSCRIPT_TOP_MAX = 9, + HB_OT_MATH_CONSTANT_SUBSCRIPT_BASELINE_DROP_MIN = 10, + HB_OT_MATH_CONSTANT_SUPERSCRIPT_SHIFT_UP = 11, + HB_OT_MATH_CONSTANT_SUPERSCRIPT_SHIFT_UP_CRAMPED = 12, + HB_OT_MATH_CONSTANT_SUPERSCRIPT_BOTTOM_MIN = 13, + HB_OT_MATH_CONSTANT_SUPERSCRIPT_BASELINE_DROP_MAX = 14, + HB_OT_MATH_CONSTANT_SUB_SUPERSCRIPT_GAP_MIN = 15, + HB_OT_MATH_CONSTANT_SUPERSCRIPT_BOTTOM_MAX_WITH_SUBSCRIPT = 16, + HB_OT_MATH_CONSTANT_SPACE_AFTER_SCRIPT = 17, + HB_OT_MATH_CONSTANT_UPPER_LIMIT_GAP_MIN = 18, + HB_OT_MATH_CONSTANT_UPPER_LIMIT_BASELINE_RISE_MIN = 19, + HB_OT_MATH_CONSTANT_LOWER_LIMIT_GAP_MIN = 20, + HB_OT_MATH_CONSTANT_LOWER_LIMIT_BASELINE_DROP_MIN = 21, + HB_OT_MATH_CONSTANT_STACK_TOP_SHIFT_UP = 22, + HB_OT_MATH_CONSTANT_STACK_TOP_DISPLAY_STYLE_SHIFT_UP = 23, + HB_OT_MATH_CONSTANT_STACK_BOTTOM_SHIFT_DOWN = 24, + HB_OT_MATH_CONSTANT_STACK_BOTTOM_DISPLAY_STYLE_SHIFT_DOWN = 25, + HB_OT_MATH_CONSTANT_STACK_GAP_MIN = 26, + HB_OT_MATH_CONSTANT_STACK_DISPLAY_STYLE_GAP_MIN = 27, + HB_OT_MATH_CONSTANT_STRETCH_STACK_TOP_SHIFT_UP = 28, + HB_OT_MATH_CONSTANT_STRETCH_STACK_BOTTOM_SHIFT_DOWN = 29, + HB_OT_MATH_CONSTANT_STRETCH_STACK_GAP_ABOVE_MIN = 30, + HB_OT_MATH_CONSTANT_STRETCH_STACK_GAP_BELOW_MIN = 31, + HB_OT_MATH_CONSTANT_FRACTION_NUMERATOR_SHIFT_UP = 32, + HB_OT_MATH_CONSTANT_FRACTION_NUMERATOR_DISPLAY_STYLE_SHIFT_UP = 33, + HB_OT_MATH_CONSTANT_FRACTION_DENOMINATOR_SHIFT_DOWN = 34, + HB_OT_MATH_CONSTANT_FRACTION_DENOMINATOR_DISPLAY_STYLE_SHIFT_DOWN = 35, + HB_OT_MATH_CONSTANT_FRACTION_NUMERATOR_GAP_MIN = 36, + HB_OT_MATH_CONSTANT_FRACTION_NUM_DISPLAY_STYLE_GAP_MIN = 37, + HB_OT_MATH_CONSTANT_FRACTION_RULE_THICKNESS = 38, + HB_OT_MATH_CONSTANT_FRACTION_DENOMINATOR_GAP_MIN = 39, + HB_OT_MATH_CONSTANT_FRACTION_DENOM_DISPLAY_STYLE_GAP_MIN = 40, + HB_OT_MATH_CONSTANT_SKEWED_FRACTION_HORIZONTAL_GAP = 41, + HB_OT_MATH_CONSTANT_SKEWED_FRACTION_VERTICAL_GAP = 42, + HB_OT_MATH_CONSTANT_OVERBAR_VERTICAL_GAP = 43, + HB_OT_MATH_CONSTANT_OVERBAR_RULE_THICKNESS = 44, + HB_OT_MATH_CONSTANT_OVERBAR_EXTRA_ASCENDER = 45, + HB_OT_MATH_CONSTANT_UNDERBAR_VERTICAL_GAP = 46, + HB_OT_MATH_CONSTANT_UNDERBAR_RULE_THICKNESS = 47, + HB_OT_MATH_CONSTANT_UNDERBAR_EXTRA_DESCENDER = 48, + HB_OT_MATH_CONSTANT_RADICAL_VERTICAL_GAP = 49, + HB_OT_MATH_CONSTANT_RADICAL_DISPLAY_STYLE_VERTICAL_GAP = 50, + HB_OT_MATH_CONSTANT_RADICAL_RULE_THICKNESS = 51, + HB_OT_MATH_CONSTANT_RADICAL_EXTRA_ASCENDER = 52, + HB_OT_MATH_CONSTANT_RADICAL_KERN_BEFORE_DEGREE = 53, + HB_OT_MATH_CONSTANT_RADICAL_KERN_AFTER_DEGREE = 54, + HB_OT_MATH_CONSTANT_RADICAL_DEGREE_BOTTOM_RAISE_PERCENT = 55 +} hb_ot_math_constant_t; + +/** + * hb_ot_math_kern_t: + * @HB_OT_MATH_KERN_TOP_RIGHT: The top right corner of the glyph. + * @HB_OT_MATH_KERN_TOP_LEFT: The top left corner of the glyph. + * @HB_OT_MATH_KERN_BOTTOM_RIGHT: The bottom right corner of the glyph. + * @HB_OT_MATH_KERN_BOTTOM_LEFT: The bottom left corner of the glyph. + * + * The math kerning-table types defined for the four corners + * of a glyph. + * + * Since: 1.3.3 + */ +typedef enum { + HB_OT_MATH_KERN_TOP_RIGHT = 0, + HB_OT_MATH_KERN_TOP_LEFT = 1, + HB_OT_MATH_KERN_BOTTOM_RIGHT = 2, + HB_OT_MATH_KERN_BOTTOM_LEFT = 3 +} hb_ot_math_kern_t; + +/** + * hb_ot_math_kern_entry_t: + * @max_correction_height: The maximum height at which this entry should be used + * @kern_value: The kern value of the entry + * + * Data type to hold math kerning (cut-in) information for a glyph. + * + * Since: 3.4.0 + */ +typedef struct { + hb_position_t max_correction_height; + hb_position_t kern_value; +} hb_ot_math_kern_entry_t; + +/** + * hb_ot_math_glyph_variant_t: + * @glyph: The glyph index of the variant + * @advance: The advance width of the variant + * + * Data type to hold math-variant information for a glyph. + * + * Since: 1.3.3 + */ +typedef struct hb_ot_math_glyph_variant_t { + hb_codepoint_t glyph; + hb_position_t advance; +} hb_ot_math_glyph_variant_t; + +/** + * hb_ot_math_glyph_part_flags_t: + * @HB_OT_MATH_GLYPH_PART_FLAG_EXTENDER: This is an extender glyph part that + * can be repeated to reach the desired length. + * + * Flags for math glyph parts. + * + * Since: 1.3.3 + */ +typedef enum { /*< flags >*/ + HB_OT_MATH_GLYPH_PART_FLAG_EXTENDER = 0x00000001u /* Extender glyph */ +} hb_ot_math_glyph_part_flags_t; + +/** + * hb_ot_math_glyph_part_t: + * @glyph: The glyph index of the variant part + * @start_connector_length: The length of the connector on the starting side of the variant part + * @end_connector_length: The length of the connector on the ending side of the variant part + * @full_advance: The total advance of the part + * @flags: #hb_ot_math_glyph_part_flags_t flags for the part + * + * Data type to hold information for a "part" component of a math-variant glyph. + * Large variants for stretchable math glyphs (such as parentheses) can be constructed + * on the fly from parts. + * + * Since: 1.3.3 + */ +typedef struct hb_ot_math_glyph_part_t { + hb_codepoint_t glyph; + hb_position_t start_connector_length; + hb_position_t end_connector_length; + hb_position_t full_advance; + hb_ot_math_glyph_part_flags_t flags; +} hb_ot_math_glyph_part_t; + +/* Methods */ + +HB_EXTERN hb_bool_t +hb_ot_math_has_data (hb_face_t *face); + +HB_EXTERN hb_position_t +hb_ot_math_get_constant (hb_font_t *font, + hb_ot_math_constant_t constant); + +HB_EXTERN hb_position_t +hb_ot_math_get_glyph_italics_correction (hb_font_t *font, + hb_codepoint_t glyph); + +HB_EXTERN hb_position_t +hb_ot_math_get_glyph_top_accent_attachment (hb_font_t *font, + hb_codepoint_t glyph); + +HB_EXTERN hb_bool_t +hb_ot_math_is_glyph_extended_shape (hb_face_t *face, + hb_codepoint_t glyph); + +HB_EXTERN hb_position_t +hb_ot_math_get_glyph_kerning (hb_font_t *font, + hb_codepoint_t glyph, + hb_ot_math_kern_t kern, + hb_position_t correction_height); + +HB_EXTERN unsigned int +hb_ot_math_get_glyph_kernings (hb_font_t *font, + hb_codepoint_t glyph, + hb_ot_math_kern_t kern, + unsigned int start_offset, + unsigned int *entries_count, /* IN/OUT */ + hb_ot_math_kern_entry_t *kern_entries /* OUT */); + +HB_EXTERN unsigned int +hb_ot_math_get_glyph_variants (hb_font_t *font, + hb_codepoint_t glyph, + hb_direction_t direction, + unsigned int start_offset, + unsigned int *variants_count, /* IN/OUT */ + hb_ot_math_glyph_variant_t *variants /* OUT */); + +HB_EXTERN hb_position_t +hb_ot_math_get_min_connector_overlap (hb_font_t *font, + hb_direction_t direction); + +HB_EXTERN unsigned int +hb_ot_math_get_glyph_assembly (hb_font_t *font, + hb_codepoint_t glyph, + hb_direction_t direction, + unsigned int start_offset, + unsigned int *parts_count, /* IN/OUT */ + hb_ot_math_glyph_part_t *parts, /* OUT */ + hb_position_t *italics_correction /* OUT */); + + +HB_END_DECLS + +#endif /* HB_OT_MATH_H */ diff --git a/dependencies/linux64/include/harfbuzz/hb-ot-meta.h b/dependencies/linux64/include/harfbuzz/hb-ot-meta.h new file mode 100644 index 0000000..7748eb4 --- /dev/null +++ b/dependencies/linux64/include/harfbuzz/hb-ot-meta.h @@ -0,0 +1,72 @@ +/* + * Copyright © 2019 Ebrahim Byagowi + * + * This is part of HarfBuzz, a text shaping library. + * + * Permission is hereby granted, without written agreement and without + * license or royalty fees, to use, copy, modify, and distribute this + * software and its documentation for any purpose, provided that the + * above copyright notice and the following two paragraphs appear in + * all copies of this software. + * + * IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE TO ANY PARTY FOR + * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES + * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN + * IF THE COPYRIGHT HOLDER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + * THE COPYRIGHT HOLDER SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, + * BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND + * FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS + * ON AN "AS IS" BASIS, AND THE COPYRIGHT HOLDER HAS NO OBLIGATION TO + * PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. + */ + +#if !defined(HB_OT_H_IN) && !defined(HB_NO_SINGLE_HEADER_ERROR) +#error "Include instead." +#endif + +#ifndef HB_OT_META_H +#define HB_OT_META_H + +#include "hb.h" + +HB_BEGIN_DECLS + +/** + * hb_ot_meta_tag_t: + * @HB_OT_META_TAG_DESIGN_LANGUAGES: Design languages. Text, using only + * Basic Latin (ASCII) characters. Indicates languages and/or scripts + * for the user audiences that the font was primarily designed for. + * @HB_OT_META_TAG_SUPPORTED_LANGUAGES: Supported languages. Text, using + * only Basic Latin (ASCII) characters. Indicates languages and/or scripts + * that the font is declared to be capable of supporting. + * + * Known metadata tags from https://docs.microsoft.com/en-us/typography/opentype/spec/meta + * + * Since: 2.6.0 + **/ +typedef enum { +/* + HB_OT_META_TAG_APPL = HB_TAG ('a','p','p','l'), + HB_OT_META_TAG_BILD = HB_TAG ('b','i','l','d'), +*/ + HB_OT_META_TAG_DESIGN_LANGUAGES = HB_TAG ('d','l','n','g'), + HB_OT_META_TAG_SUPPORTED_LANGUAGES = HB_TAG ('s','l','n','g'), + + /*< private >*/ + _HB_OT_META_TAG_MAX_VALUE = HB_TAG_MAX_SIGNED /*< skip >*/ +} hb_ot_meta_tag_t; + +HB_EXTERN unsigned int +hb_ot_meta_get_entry_tags (hb_face_t *face, + unsigned int start_offset, + unsigned int *entries_count, /* IN/OUT. May be NULL. */ + hb_ot_meta_tag_t *entries /* OUT. May be NULL. */); + +HB_EXTERN hb_blob_t * +hb_ot_meta_reference_entry (hb_face_t *face, hb_ot_meta_tag_t meta_tag); + +HB_END_DECLS + +#endif /* HB_OT_META_H */ diff --git a/dependencies/linux64/include/harfbuzz/hb-ot-metrics.h b/dependencies/linux64/include/harfbuzz/hb-ot-metrics.h new file mode 100644 index 0000000..30de500 --- /dev/null +++ b/dependencies/linux64/include/harfbuzz/hb-ot-metrics.h @@ -0,0 +1,129 @@ +/* + * Copyright © 2018 Ebrahim Byagowi + * + * This is part of HarfBuzz, a text shaping library. + * + * Permission is hereby granted, without written agreement and without + * license or royalty fees, to use, copy, modify, and distribute this + * software and its documentation for any purpose, provided that the + * above copyright notice and the following two paragraphs appear in + * all copies of this software. + * + * IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE TO ANY PARTY FOR + * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES + * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN + * IF THE COPYRIGHT HOLDER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + * THE COPYRIGHT HOLDER SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, + * BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND + * FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS + * ON AN "AS IS" BASIS, AND THE COPYRIGHT HOLDER HAS NO OBLIGATION TO + * PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. + */ + +#if !defined(HB_OT_H_IN) && !defined(HB_NO_SINGLE_HEADER_ERROR) +#error "Include instead." +#endif + +#ifndef HB_OT_METRICS_H +#define HB_OT_METRICS_H + +#include "hb.h" +#include "hb-ot-name.h" + +HB_BEGIN_DECLS + + +/** + * hb_ot_metrics_tag_t: + * @HB_OT_METRICS_TAG_HORIZONTAL_ASCENDER: horizontal ascender. + * @HB_OT_METRICS_TAG_HORIZONTAL_DESCENDER: horizontal descender. + * @HB_OT_METRICS_TAG_HORIZONTAL_LINE_GAP: horizontal line gap. + * @HB_OT_METRICS_TAG_HORIZONTAL_CLIPPING_ASCENT: horizontal clipping ascent. + * @HB_OT_METRICS_TAG_HORIZONTAL_CLIPPING_DESCENT: horizontal clipping descent. + * @HB_OT_METRICS_TAG_VERTICAL_ASCENDER: vertical ascender. + * @HB_OT_METRICS_TAG_VERTICAL_DESCENDER: vertical descender. + * @HB_OT_METRICS_TAG_VERTICAL_LINE_GAP: vertical line gap. + * @HB_OT_METRICS_TAG_HORIZONTAL_CARET_RISE: horizontal caret rise. + * @HB_OT_METRICS_TAG_HORIZONTAL_CARET_RUN: horizontal caret run. + * @HB_OT_METRICS_TAG_HORIZONTAL_CARET_OFFSET: horizontal caret offset. + * @HB_OT_METRICS_TAG_VERTICAL_CARET_RISE: vertical caret rise. + * @HB_OT_METRICS_TAG_VERTICAL_CARET_RUN: vertical caret run. + * @HB_OT_METRICS_TAG_VERTICAL_CARET_OFFSET: vertical caret offset. + * @HB_OT_METRICS_TAG_X_HEIGHT: x height. + * @HB_OT_METRICS_TAG_CAP_HEIGHT: cap height. + * @HB_OT_METRICS_TAG_SUBSCRIPT_EM_X_SIZE: subscript em x size. + * @HB_OT_METRICS_TAG_SUBSCRIPT_EM_Y_SIZE: subscript em y size. + * @HB_OT_METRICS_TAG_SUBSCRIPT_EM_X_OFFSET: subscript em x offset. + * @HB_OT_METRICS_TAG_SUBSCRIPT_EM_Y_OFFSET: subscript em y offset. + * @HB_OT_METRICS_TAG_SUPERSCRIPT_EM_X_SIZE: superscript em x size. + * @HB_OT_METRICS_TAG_SUPERSCRIPT_EM_Y_SIZE: superscript em y size. + * @HB_OT_METRICS_TAG_SUPERSCRIPT_EM_X_OFFSET: superscript em x offset. + * @HB_OT_METRICS_TAG_SUPERSCRIPT_EM_Y_OFFSET: superscript em y offset. + * @HB_OT_METRICS_TAG_STRIKEOUT_SIZE: strikeout size. + * @HB_OT_METRICS_TAG_STRIKEOUT_OFFSET: strikeout offset. + * @HB_OT_METRICS_TAG_UNDERLINE_SIZE: underline size. + * @HB_OT_METRICS_TAG_UNDERLINE_OFFSET: underline offset. + * + * Metric tags corresponding to [MVAR Value + * Tags](https://docs.microsoft.com/en-us/typography/opentype/spec/mvar#value-tags) + * + * Since: 2.6.0 + **/ +typedef enum { + HB_OT_METRICS_TAG_HORIZONTAL_ASCENDER = HB_TAG ('h','a','s','c'), + HB_OT_METRICS_TAG_HORIZONTAL_DESCENDER = HB_TAG ('h','d','s','c'), + HB_OT_METRICS_TAG_HORIZONTAL_LINE_GAP = HB_TAG ('h','l','g','p'), + HB_OT_METRICS_TAG_HORIZONTAL_CLIPPING_ASCENT = HB_TAG ('h','c','l','a'), + HB_OT_METRICS_TAG_HORIZONTAL_CLIPPING_DESCENT = HB_TAG ('h','c','l','d'), + HB_OT_METRICS_TAG_VERTICAL_ASCENDER = HB_TAG ('v','a','s','c'), + HB_OT_METRICS_TAG_VERTICAL_DESCENDER = HB_TAG ('v','d','s','c'), + HB_OT_METRICS_TAG_VERTICAL_LINE_GAP = HB_TAG ('v','l','g','p'), + HB_OT_METRICS_TAG_HORIZONTAL_CARET_RISE = HB_TAG ('h','c','r','s'), + HB_OT_METRICS_TAG_HORIZONTAL_CARET_RUN = HB_TAG ('h','c','r','n'), + HB_OT_METRICS_TAG_HORIZONTAL_CARET_OFFSET = HB_TAG ('h','c','o','f'), + HB_OT_METRICS_TAG_VERTICAL_CARET_RISE = HB_TAG ('v','c','r','s'), + HB_OT_METRICS_TAG_VERTICAL_CARET_RUN = HB_TAG ('v','c','r','n'), + HB_OT_METRICS_TAG_VERTICAL_CARET_OFFSET = HB_TAG ('v','c','o','f'), + HB_OT_METRICS_TAG_X_HEIGHT = HB_TAG ('x','h','g','t'), + HB_OT_METRICS_TAG_CAP_HEIGHT = HB_TAG ('c','p','h','t'), + HB_OT_METRICS_TAG_SUBSCRIPT_EM_X_SIZE = HB_TAG ('s','b','x','s'), + HB_OT_METRICS_TAG_SUBSCRIPT_EM_Y_SIZE = HB_TAG ('s','b','y','s'), + HB_OT_METRICS_TAG_SUBSCRIPT_EM_X_OFFSET = HB_TAG ('s','b','x','o'), + HB_OT_METRICS_TAG_SUBSCRIPT_EM_Y_OFFSET = HB_TAG ('s','b','y','o'), + HB_OT_METRICS_TAG_SUPERSCRIPT_EM_X_SIZE = HB_TAG ('s','p','x','s'), + HB_OT_METRICS_TAG_SUPERSCRIPT_EM_Y_SIZE = HB_TAG ('s','p','y','s'), + HB_OT_METRICS_TAG_SUPERSCRIPT_EM_X_OFFSET = HB_TAG ('s','p','x','o'), + HB_OT_METRICS_TAG_SUPERSCRIPT_EM_Y_OFFSET = HB_TAG ('s','p','y','o'), + HB_OT_METRICS_TAG_STRIKEOUT_SIZE = HB_TAG ('s','t','r','s'), + HB_OT_METRICS_TAG_STRIKEOUT_OFFSET = HB_TAG ('s','t','r','o'), + HB_OT_METRICS_TAG_UNDERLINE_SIZE = HB_TAG ('u','n','d','s'), + HB_OT_METRICS_TAG_UNDERLINE_OFFSET = HB_TAG ('u','n','d','o'), + + /*< private >*/ + _HB_OT_METRICS_TAG_MAX_VALUE = HB_TAG_MAX_SIGNED /*< skip >*/ +} hb_ot_metrics_tag_t; + +HB_EXTERN hb_bool_t +hb_ot_metrics_get_position (hb_font_t *font, + hb_ot_metrics_tag_t metrics_tag, + hb_position_t *position /* OUT. May be NULL. */); + +HB_EXTERN void +hb_ot_metrics_get_position_with_fallback (hb_font_t *font, + hb_ot_metrics_tag_t metrics_tag, + hb_position_t *position /* OUT */); + +HB_EXTERN float +hb_ot_metrics_get_variation (hb_font_t *font, hb_ot_metrics_tag_t metrics_tag); + +HB_EXTERN hb_position_t +hb_ot_metrics_get_x_variation (hb_font_t *font, hb_ot_metrics_tag_t metrics_tag); + +HB_EXTERN hb_position_t +hb_ot_metrics_get_y_variation (hb_font_t *font, hb_ot_metrics_tag_t metrics_tag); + +HB_END_DECLS + +#endif /* HB_OT_METRICS_H */ diff --git a/dependencies/linux64/include/harfbuzz/hb-ot-name.h b/dependencies/linux64/include/harfbuzz/hb-ot-name.h new file mode 100644 index 0000000..03e664b --- /dev/null +++ b/dependencies/linux64/include/harfbuzz/hb-ot-name.h @@ -0,0 +1,164 @@ +/* + * Copyright © 2018 Ebrahim Byagowi. + * + * This is part of HarfBuzz, a text shaping library. + * + * Permission is hereby granted, without written agreement and without + * license or royalty fees, to use, copy, modify, and distribute this + * software and its documentation for any purpose, provided that the + * above copyright notice and the following two paragraphs appear in + * all copies of this software. + * + * IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE TO ANY PARTY FOR + * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES + * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN + * IF THE COPYRIGHT HOLDER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + * THE COPYRIGHT HOLDER SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, + * BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND + * FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS + * ON AN "AS IS" BASIS, AND THE COPYRIGHT HOLDER HAS NO OBLIGATION TO + * PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. + */ + +#if !defined(HB_OT_H_IN) && !defined(HB_NO_SINGLE_HEADER_ERROR) +#error "Include instead." +#endif + +#ifndef HB_OT_NAME_H +#define HB_OT_NAME_H + +#include "hb.h" + +HB_BEGIN_DECLS + +/** + * hb_ot_name_id_predefined_t: + * @HB_OT_NAME_ID_COPYRIGHT: Copyright notice + * @HB_OT_NAME_ID_FONT_FAMILY: Font Family name + * @HB_OT_NAME_ID_FONT_SUBFAMILY: Font Subfamily name + * @HB_OT_NAME_ID_UNIQUE_ID: Unique font identifier + * @HB_OT_NAME_ID_FULL_NAME: Full font name that reflects + * all family and relevant subfamily descriptors + * @HB_OT_NAME_ID_VERSION_STRING: Version string + * @HB_OT_NAME_ID_POSTSCRIPT_NAME: PostScript name for the font + * @HB_OT_NAME_ID_TRADEMARK: Trademark + * @HB_OT_NAME_ID_MANUFACTURER: Manufacturer Name + * @HB_OT_NAME_ID_DESIGNER: Designer + * @HB_OT_NAME_ID_DESCRIPTION: Description + * @HB_OT_NAME_ID_VENDOR_URL: URL of font vendor + * @HB_OT_NAME_ID_DESIGNER_URL: URL of typeface designer + * @HB_OT_NAME_ID_LICENSE: License Description + * @HB_OT_NAME_ID_LICENSE_URL: URL where additional licensing + * information can be found + * @HB_OT_NAME_ID_TYPOGRAPHIC_FAMILY: Typographic Family name + * @HB_OT_NAME_ID_TYPOGRAPHIC_SUBFAMILY: Typographic Subfamily name + * @HB_OT_NAME_ID_MAC_FULL_NAME: Compatible Full Name for MacOS + * @HB_OT_NAME_ID_SAMPLE_TEXT: Sample text + * @HB_OT_NAME_ID_CID_FINDFONT_NAME: PostScript CID findfont name + * @HB_OT_NAME_ID_WWS_FAMILY: WWS Family Name + * @HB_OT_NAME_ID_WWS_SUBFAMILY: WWS Subfamily Name + * @HB_OT_NAME_ID_LIGHT_BACKGROUND: Light Background Palette + * @HB_OT_NAME_ID_DARK_BACKGROUND: Dark Background Palette + * @HB_OT_NAME_ID_VARIATIONS_PS_PREFIX: Variations PostScript Name Prefix + * @HB_OT_NAME_ID_INVALID: Value to represent a nonexistent name ID. + * + * An enum type representing the pre-defined name IDs. + * + * For more information on these fields, see the + * [OpenType spec](https://docs.microsoft.com/en-us/typography/opentype/spec/name#name-ids). + * + * Since: 7.0.0 + **/ +typedef enum +{ + HB_OT_NAME_ID_COPYRIGHT = 0, + HB_OT_NAME_ID_FONT_FAMILY = 1, + HB_OT_NAME_ID_FONT_SUBFAMILY = 2, + HB_OT_NAME_ID_UNIQUE_ID = 3, + HB_OT_NAME_ID_FULL_NAME = 4, + HB_OT_NAME_ID_VERSION_STRING = 5, + HB_OT_NAME_ID_POSTSCRIPT_NAME = 6, + HB_OT_NAME_ID_TRADEMARK = 7, + HB_OT_NAME_ID_MANUFACTURER = 8, + HB_OT_NAME_ID_DESIGNER = 9, + HB_OT_NAME_ID_DESCRIPTION = 10, + HB_OT_NAME_ID_VENDOR_URL = 11, + HB_OT_NAME_ID_DESIGNER_URL = 12, + HB_OT_NAME_ID_LICENSE = 13, + HB_OT_NAME_ID_LICENSE_URL = 14, +/*HB_OT_NAME_ID_RESERVED = 15,*/ + HB_OT_NAME_ID_TYPOGRAPHIC_FAMILY = 16, + HB_OT_NAME_ID_TYPOGRAPHIC_SUBFAMILY = 17, + HB_OT_NAME_ID_MAC_FULL_NAME = 18, + HB_OT_NAME_ID_SAMPLE_TEXT = 19, + HB_OT_NAME_ID_CID_FINDFONT_NAME = 20, + HB_OT_NAME_ID_WWS_FAMILY = 21, + HB_OT_NAME_ID_WWS_SUBFAMILY = 22, + HB_OT_NAME_ID_LIGHT_BACKGROUND = 23, + HB_OT_NAME_ID_DARK_BACKGROUND = 24, + HB_OT_NAME_ID_VARIATIONS_PS_PREFIX = 25, + + HB_OT_NAME_ID_INVALID = 0xFFFF +} hb_ot_name_id_predefined_t; + +/** + * hb_ot_name_id_t: + * + * An integral type representing an OpenType 'name' table name identifier. + * There are predefined name IDs, as well as name IDs return from other + * API. These can be used to fetch name strings from a font face. + * + * Since: 2.0.0 + **/ +typedef unsigned int hb_ot_name_id_t; + + +/** + * hb_ot_name_entry_t: + * @name_id: name ID + * @language: language + * + * Structure representing a name ID in a particular language. + * + * Since: 2.1.0 + **/ +typedef struct hb_ot_name_entry_t { + hb_ot_name_id_t name_id; + /*< private >*/ + hb_var_int_t var; + /*< public >*/ + hb_language_t language; +} hb_ot_name_entry_t; + +HB_EXTERN const hb_ot_name_entry_t * +hb_ot_name_list_names (hb_face_t *face, + unsigned int *num_entries /* OUT */); + + +HB_EXTERN unsigned int +hb_ot_name_get_utf8 (hb_face_t *face, + hb_ot_name_id_t name_id, + hb_language_t language, + unsigned int *text_size /* IN/OUT */, + char *text /* OUT */); + +HB_EXTERN unsigned int +hb_ot_name_get_utf16 (hb_face_t *face, + hb_ot_name_id_t name_id, + hb_language_t language, + unsigned int *text_size /* IN/OUT */, + uint16_t *text /* OUT */); + +HB_EXTERN unsigned int +hb_ot_name_get_utf32 (hb_face_t *face, + hb_ot_name_id_t name_id, + hb_language_t language, + unsigned int *text_size /* IN/OUT */, + uint32_t *text /* OUT */); + + +HB_END_DECLS + +#endif /* HB_OT_NAME_H */ diff --git a/dependencies/linux64/include/harfbuzz/hb-ot-shape.h b/dependencies/linux64/include/harfbuzz/hb-ot-shape.h new file mode 100644 index 0000000..80063f7 --- /dev/null +++ b/dependencies/linux64/include/harfbuzz/hb-ot-shape.h @@ -0,0 +1,59 @@ +/* + * Copyright © 2013 Red Hat, Inc. + * + * This is part of HarfBuzz, a text shaping library. + * + * Permission is hereby granted, without written agreement and without + * license or royalty fees, to use, copy, modify, and distribute this + * software and its documentation for any purpose, provided that the + * above copyright notice and the following two paragraphs appear in + * all copies of this software. + * + * IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE TO ANY PARTY FOR + * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES + * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN + * IF THE COPYRIGHT HOLDER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + * THE COPYRIGHT HOLDER SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, + * BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND + * FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS + * ON AN "AS IS" BASIS, AND THE COPYRIGHT HOLDER HAS NO OBLIGATION TO + * PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. + * + * Red Hat Author(s): Behdad Esfahbod + */ + +#if !defined(HB_OT_H_IN) && !defined(HB_NO_SINGLE_HEADER_ERROR) +#error "Include instead." +#endif + +#ifndef HB_OT_SHAPE_H +#define HB_OT_SHAPE_H + +#include "hb.h" + +HB_BEGIN_DECLS + +/* TODO port to shape-plan / set. */ +HB_EXTERN void +hb_ot_shape_glyphs_closure (hb_font_t *font, + hb_buffer_t *buffer, + const hb_feature_t *features, + unsigned int num_features, + hb_set_t *glyphs); + +HB_EXTERN void +hb_ot_shape_plan_collect_lookups (hb_shape_plan_t *shape_plan, + hb_tag_t table_tag, + hb_set_t *lookup_indexes /* OUT */); + +HB_EXTERN unsigned int +hb_ot_shape_plan_get_feature_tags (hb_shape_plan_t *shape_plan, + unsigned int start_offset, + unsigned int *tag_count, /* IN/OUT */ + hb_tag_t *tags /* OUT */); + +HB_END_DECLS + +#endif /* HB_OT_SHAPE_H */ diff --git a/dependencies/linux64/include/harfbuzz/hb-ot-var.h b/dependencies/linux64/include/harfbuzz/hb-ot-var.h new file mode 100644 index 0000000..05147cc --- /dev/null +++ b/dependencies/linux64/include/harfbuzz/hb-ot-var.h @@ -0,0 +1,191 @@ +/* + * Copyright © 2017 Google, Inc. + * + * This is part of HarfBuzz, a text shaping library. + * + * Permission is hereby granted, without written agreement and without + * license or royalty fees, to use, copy, modify, and distribute this + * software and its documentation for any purpose, provided that the + * above copyright notice and the following two paragraphs appear in + * all copies of this software. + * + * IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE TO ANY PARTY FOR + * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES + * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN + * IF THE COPYRIGHT HOLDER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + * THE COPYRIGHT HOLDER SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, + * BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND + * FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS + * ON AN "AS IS" BASIS, AND THE COPYRIGHT HOLDER HAS NO OBLIGATION TO + * PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. + * + * Red Hat Author(s): Behdad Esfahbod + */ + +#if !defined(HB_OT_H_IN) && !defined(HB_NO_SINGLE_HEADER_ERROR) +#error "Include instead." +#endif + +#ifndef HB_OT_VAR_H +#define HB_OT_VAR_H + +#include "hb.h" + +HB_BEGIN_DECLS + +/** + * HB_OT_TAG_VAR_AXIS_ITALIC: + * + * Registered tag for the roman/italic axis. + */ +#define HB_OT_TAG_VAR_AXIS_ITALIC HB_TAG('i','t','a','l') + +/** + * HB_OT_TAG_VAR_AXIS_OPTICAL_SIZE: + * + * Registered tag for the optical-size axis. + * Note: The optical-size axis supersedes the OpenType `size` feature. + */ +#define HB_OT_TAG_VAR_AXIS_OPTICAL_SIZE HB_TAG('o','p','s','z') + +/** + * HB_OT_TAG_VAR_AXIS_SLANT: + * + * Registered tag for the slant axis + */ +#define HB_OT_TAG_VAR_AXIS_SLANT HB_TAG('s','l','n','t') + +/** + * HB_OT_TAG_VAR_AXIS_WIDTH: + * + * Registered tag for the width axis. + */ +#define HB_OT_TAG_VAR_AXIS_WIDTH HB_TAG('w','d','t','h') + +/** + * HB_OT_TAG_VAR_AXIS_WEIGHT: + * + * Registered tag for the weight axis. + */ +#define HB_OT_TAG_VAR_AXIS_WEIGHT HB_TAG('w','g','h','t') + + +/* + * fvar / avar + */ + +HB_EXTERN hb_bool_t +hb_ot_var_has_data (hb_face_t *face); + + +/* + * Variation axes. + */ + + +HB_EXTERN unsigned int +hb_ot_var_get_axis_count (hb_face_t *face); + +/** + * hb_ot_var_axis_flags_t: + * @HB_OT_VAR_AXIS_FLAG_HIDDEN: The axis should not be exposed directly in user interfaces. + * + * Flags for #hb_ot_var_axis_info_t. + * + * Since: 2.2.0 + */ +typedef enum { /*< flags >*/ + HB_OT_VAR_AXIS_FLAG_HIDDEN = 0x00000001u, + + /*< private >*/ + _HB_OT_VAR_AXIS_FLAG_MAX_VALUE= HB_TAG_MAX_SIGNED /*< skip >*/ +} hb_ot_var_axis_flags_t; + +/** + * hb_ot_var_axis_info_t: + * @axis_index: Index of the axis in the variation-axis array + * @tag: The #hb_tag_t tag identifying the design variation of the axis + * @name_id: The `name` table Name ID that provides display names for the axis + * @flags: The #hb_ot_var_axis_flags_t flags for the axis + * @min_value: The minimum value on the variation axis that the font covers + * @default_value: The position on the variation axis corresponding to the font's defaults + * @max_value: The maximum value on the variation axis that the font covers + * + * Data type for holding variation-axis values. + * + * The minimum, default, and maximum values are in un-normalized, user scales. + * + * Note: at present, the only flag defined for @flags is + * #HB_OT_VAR_AXIS_FLAG_HIDDEN. + * + * Since: 2.2.0 + */ +typedef struct hb_ot_var_axis_info_t { + unsigned int axis_index; + hb_tag_t tag; + hb_ot_name_id_t name_id; + hb_ot_var_axis_flags_t flags; + float min_value; + float default_value; + float max_value; + /*< private >*/ + unsigned int reserved; +} hb_ot_var_axis_info_t; + +HB_EXTERN unsigned int +hb_ot_var_get_axis_infos (hb_face_t *face, + unsigned int start_offset, + unsigned int *axes_count /* IN/OUT */, + hb_ot_var_axis_info_t *axes_array /* OUT */); + +HB_EXTERN hb_bool_t +hb_ot_var_find_axis_info (hb_face_t *face, + hb_tag_t axis_tag, + hb_ot_var_axis_info_t *axis_info); + + +/* + * Named instances. + */ + +HB_EXTERN unsigned int +hb_ot_var_get_named_instance_count (hb_face_t *face); + +HB_EXTERN hb_ot_name_id_t +hb_ot_var_named_instance_get_subfamily_name_id (hb_face_t *face, + unsigned int instance_index); + +HB_EXTERN hb_ot_name_id_t +hb_ot_var_named_instance_get_postscript_name_id (hb_face_t *face, + unsigned int instance_index); + +HB_EXTERN unsigned int +hb_ot_var_named_instance_get_design_coords (hb_face_t *face, + unsigned int instance_index, + unsigned int *coords_length, /* IN/OUT */ + float *coords /* OUT */); + + +/* + * Conversions. + */ + +HB_EXTERN void +hb_ot_var_normalize_variations (hb_face_t *face, + const hb_variation_t *variations, /* IN */ + unsigned int variations_length, + int *coords, /* OUT */ + unsigned int coords_length); + +HB_EXTERN void +hb_ot_var_normalize_coords (hb_face_t *face, + unsigned int coords_length, + const float *design_coords, /* IN */ + int *normalized_coords /* OUT */); + + +HB_END_DECLS + +#endif /* HB_OT_VAR_H */ diff --git a/dependencies/linux64/include/harfbuzz/hb-ot.h b/dependencies/linux64/include/harfbuzz/hb-ot.h new file mode 100644 index 0000000..f2dbaa1 --- /dev/null +++ b/dependencies/linux64/include/harfbuzz/hb-ot.h @@ -0,0 +1,49 @@ +/* + * Copyright © 2009 Red Hat, Inc. + * + * This is part of HarfBuzz, a text shaping library. + * + * Permission is hereby granted, without written agreement and without + * license or royalty fees, to use, copy, modify, and distribute this + * software and its documentation for any purpose, provided that the + * above copyright notice and the following two paragraphs appear in + * all copies of this software. + * + * IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE TO ANY PARTY FOR + * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES + * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN + * IF THE COPYRIGHT HOLDER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + * THE COPYRIGHT HOLDER SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, + * BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND + * FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS + * ON AN "AS IS" BASIS, AND THE COPYRIGHT HOLDER HAS NO OBLIGATION TO + * PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. + * + * Red Hat Author(s): Behdad Esfahbod + */ + +#ifndef HB_OT_H +#define HB_OT_H +#define HB_OT_H_IN + +#include "hb.h" + +#include "hb-ot-color.h" +#include "hb-ot-deprecated.h" +#include "hb-ot-font.h" +#include "hb-ot-layout.h" +#include "hb-ot-math.h" +#include "hb-ot-meta.h" +#include "hb-ot-metrics.h" +#include "hb-ot-name.h" +#include "hb-ot-shape.h" +#include "hb-ot-var.h" + +HB_BEGIN_DECLS + +HB_END_DECLS + +#undef HB_OT_H_IN +#endif /* HB_OT_H */ diff --git a/dependencies/linux64/include/harfbuzz/hb-paint.h b/dependencies/linux64/include/harfbuzz/hb-paint.h new file mode 100644 index 0000000..3785077 --- /dev/null +++ b/dependencies/linux64/include/harfbuzz/hb-paint.h @@ -0,0 +1,1039 @@ +/* + * Copyright © 2022 Matthias Clasen + * + * This is part of HarfBuzz, a text shaping library. + * + * Permission is hereby granted, without written agreement and without + * license or royalty fees, to use, copy, modify, and distribute this + * software and its documentation for any purpose, provided that the + * above copyright notice and the following two paragraphs appear in + * all copies of this software. + * + * IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE TO ANY PARTY FOR + * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES + * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN + * IF THE COPYRIGHT HOLDER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + * THE COPYRIGHT HOLDER SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, + * BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND + * FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS + * ON AN "AS IS" BASIS, AND THE COPYRIGHT HOLDER HAS NO OBLIGATION TO + * PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. + */ + +#if !defined(HB_H_IN) && !defined(HB_NO_SINGLE_HEADER_ERROR) +#error "Include instead." +#endif + +#ifndef HB_PAINT_H +#define HB_PAINT_H + +#include "hb-common.h" + +HB_BEGIN_DECLS + + +/** + * hb_paint_funcs_t: + * + * Glyph paint callbacks. + * + * The callbacks assume that the caller maintains a stack + * of current transforms, clips and intermediate surfaces, + * as evidenced by the pairs of push/pop callbacks. The + * push/pop calls will be properly nested, so it is fine + * to store the different kinds of object on a single stack. + * + * Not all callbacks are required for all kinds of glyphs. + * For rendering COLRv0 or non-color outline glyphs, the + * gradient callbacks are not needed, and the composite + * callback only needs to handle simple alpha compositing + * (#HB_PAINT_COMPOSITE_MODE_SRC_OVER). + * + * The paint-image callback is only needed for glyphs + * with image blobs in the CBDT, sbix or SVG tables. + * + * The custom-palette-color callback is only necessary if + * you want to override colors from the font palette with + * custom colors. + * + * Since: 7.0.0 + **/ +typedef struct hb_paint_funcs_t hb_paint_funcs_t; + +HB_EXTERN hb_paint_funcs_t * +hb_paint_funcs_create (void); + +HB_EXTERN hb_paint_funcs_t * +hb_paint_funcs_get_empty (void); + +HB_EXTERN hb_paint_funcs_t * +hb_paint_funcs_reference (hb_paint_funcs_t *funcs); + +HB_EXTERN void +hb_paint_funcs_destroy (hb_paint_funcs_t *funcs); + +HB_EXTERN hb_bool_t +hb_paint_funcs_set_user_data (hb_paint_funcs_t *funcs, + hb_user_data_key_t *key, + void * data, + hb_destroy_func_t destroy, + hb_bool_t replace); + + +HB_EXTERN void * +hb_paint_funcs_get_user_data (const hb_paint_funcs_t *funcs, + hb_user_data_key_t *key); + +HB_EXTERN void +hb_paint_funcs_make_immutable (hb_paint_funcs_t *funcs); + +HB_EXTERN hb_bool_t +hb_paint_funcs_is_immutable (hb_paint_funcs_t *funcs); + +/** + * hb_paint_push_transform_func_t: + * @funcs: paint functions object + * @paint_data: The data accompanying the paint functions in hb_font_paint_glyph() + * @xx: xx component of the transform matrix + * @yx: yx component of the transform matrix + * @xy: xy component of the transform matrix + * @yy: yy component of the transform matrix + * @dx: dx component of the transform matrix + * @dy: dy component of the transform matrix + * @user_data: User data pointer passed to hb_paint_funcs_set_push_transform_func() + * + * A virtual method for the #hb_paint_funcs_t to apply + * a transform to subsequent paint calls. + * + * This transform is applied after the current transform, + * and remains in effect until a matching call to + * the #hb_paint_funcs_pop_transform_func_t vfunc. + * + * Since: 7.0.0 + */ +typedef void (*hb_paint_push_transform_func_t) (hb_paint_funcs_t *funcs, + void *paint_data, + float xx, float yx, + float xy, float yy, + float dx, float dy, + void *user_data); + +/** + * hb_paint_pop_transform_func_t: + * @funcs: paint functions object + * @paint_data: The data accompanying the paint functions in hb_font_paint_glyph() + * @user_data: User data pointer passed to hb_paint_funcs_set_pop_transform_func() + * + * A virtual method for the #hb_paint_funcs_t to undo + * the effect of a prior call to the #hb_paint_funcs_push_transform_func_t + * vfunc. + * + * Since: 7.0.0 + */ +typedef void (*hb_paint_pop_transform_func_t) (hb_paint_funcs_t *funcs, + void *paint_data, + void *user_data); + +/** + * hb_paint_color_glyph_func_t: + * @funcs: paint functions object + * @paint_data: The data accompanying the paint functions in hb_font_paint_glyph() + * @glyph: the glyph ID + * @font: the font + * @user_data: User data pointer passed to hb_paint_funcs_set_color_glyph_func() + * + * A virtual method for the #hb_paint_funcs_t to render a color glyph by glyph index. + * + * Return value: `true` if the glyph was painted, `false` otherwise. + * + * Since: 8.2.0 + */ +typedef hb_bool_t (*hb_paint_color_glyph_func_t) (hb_paint_funcs_t *funcs, + void *paint_data, + hb_codepoint_t glyph, + hb_font_t *font, + void *user_data); + +/** + * hb_paint_push_clip_glyph_func_t: + * @funcs: paint functions object + * @paint_data: The data accompanying the paint functions in hb_font_paint_glyph() + * @glyph: the glyph ID + * @font: the font + * @user_data: User data pointer passed to hb_paint_funcs_set_push_clip_glyph_func() + * + * A virtual method for the #hb_paint_funcs_t to clip + * subsequent paint calls to the outline of a glyph. + * + * The coordinates of the glyph outline are expected in the + * current @font scale (ie. the results of calling + * hb_font_draw_glyph() with @font). The outline is + * transformed by the current transform. + * + * This clip is applied in addition to the current clip, + * and remains in effect until a matching call to + * the #hb_paint_funcs_pop_clip_func_t vfunc. + * + * Since: 7.0.0 + */ +typedef void (*hb_paint_push_clip_glyph_func_t) (hb_paint_funcs_t *funcs, + void *paint_data, + hb_codepoint_t glyph, + hb_font_t *font, + void *user_data); + +/** + * hb_paint_push_clip_rectangle_func_t: + * @funcs: paint functions object + * @paint_data: The data accompanying the paint functions in hb_font_paint_glyph() + * @xmin: min X for the rectangle + * @ymin: min Y for the rectangle + * @xmax: max X for the rectangle + * @ymax: max Y for the rectangle + * @user_data: User data pointer passed to hb_paint_funcs_set_push_clip_rectangle_func() + * + * A virtual method for the #hb_paint_funcs_t to clip + * subsequent paint calls to a rectangle. + * + * The coordinates of the rectangle are interpreted according + * to the current transform. + * + * This clip is applied in addition to the current clip, + * and remains in effect until a matching call to + * the #hb_paint_funcs_pop_clip_func_t vfunc. + * + * Since: 7.0.0 + */ +typedef void (*hb_paint_push_clip_rectangle_func_t) (hb_paint_funcs_t *funcs, + void *paint_data, + float xmin, float ymin, + float xmax, float ymax, + void *user_data); + +/** + * hb_paint_pop_clip_func_t: + * @funcs: paint functions object + * @paint_data: The data accompanying the paint functions in hb_font_paint_glyph() + * @user_data: User data pointer passed to hb_paint_funcs_set_pop_clip_func() + * + * A virtual method for the #hb_paint_funcs_t to undo + * the effect of a prior call to the #hb_paint_funcs_push_clip_glyph_func_t + * or #hb_paint_funcs_push_clip_rectangle_func_t vfuncs. + * + * Since: 7.0.0 + */ +typedef void (*hb_paint_pop_clip_func_t) (hb_paint_funcs_t *funcs, + void *paint_data, + void *user_data); + +/** + * hb_paint_color_func_t: + * @funcs: paint functions object + * @paint_data: The data accompanying the paint functions in hb_font_paint_glyph() + * @is_foreground: whether the color is the foreground + * @color: The color to use, unpremultiplied + * @user_data: User data pointer passed to hb_paint_funcs_set_color_func() + * + * A virtual method for the #hb_paint_funcs_t to paint a + * color everywhere within the current clip. + * + * Since: 7.0.0 + */ +typedef void (*hb_paint_color_func_t) (hb_paint_funcs_t *funcs, + void *paint_data, + hb_bool_t is_foreground, + hb_color_t color, + void *user_data); + +/** + * HB_PAINT_IMAGE_FORMAT_PNG: + * + * Tag identifying PNG images in #hb_paint_image_func_t callbacks. + * + * Since: 7.0.0 + */ +#define HB_PAINT_IMAGE_FORMAT_PNG HB_TAG('p','n','g',' ') + +/** + * HB_PAINT_IMAGE_FORMAT_SVG: + * + * Tag identifying SVG images in #hb_paint_image_func_t callbacks. + * + * Since: 7.0.0 + */ +#define HB_PAINT_IMAGE_FORMAT_SVG HB_TAG('s','v','g',' ') + +/** + * HB_PAINT_IMAGE_FORMAT_BGRA: + * + * Tag identifying raw pixel-data images in #hb_paint_image_func_t callbacks. + * The data is in BGRA pre-multiplied sRGBA color-space format. + * + * Since: 7.0.0 + */ +#define HB_PAINT_IMAGE_FORMAT_BGRA HB_TAG('B','G','R','A') + +/** + * hb_paint_image_func_t: + * @funcs: paint functions object + * @paint_data: The data accompanying the paint functions in hb_font_paint_glyph() + * @image: the image data + * @width: width of the raster image in pixels, or 0 + * @height: height of the raster image in pixels, or 0 + * @format: the image format as a tag + * @slant: Deprecated. Always set to 0.0. + * @extents: (nullable): glyph extents for desired rendering + * @user_data: User data pointer passed to hb_paint_funcs_set_image_func() + * + * A virtual method for the #hb_paint_funcs_t to paint a glyph image. + * + * This method is called for glyphs with image blobs in the CBDT, + * sbix or SVG tables. The @format identifies the kind of data that + * is contained in @image. Possible values include #HB_PAINT_IMAGE_FORMAT_PNG, + * #HB_PAINT_IMAGE_FORMAT_SVG and #HB_PAINT_IMAGE_FORMAT_BGRA. + * + * The image dimensions and glyph extents are provided if available, + * and should be used to size and position the image. + * + * Return value: Whether the operation was successful. + * + * Since: 7.0.0 + */ +typedef hb_bool_t (*hb_paint_image_func_t) (hb_paint_funcs_t *funcs, + void *paint_data, + hb_blob_t *image, + unsigned int width, + unsigned int height, + hb_tag_t format, + float slant, + hb_glyph_extents_t *extents, + void *user_data); + +/** + * hb_color_stop_t: + * @offset: the offset of the color stop + * @is_foreground: whether the color is the foreground + * @color: the color, unpremultiplied + * + * Information about a color stop on a color line. + * + * Color lines typically have offsets ranging between 0 and 1, + * but that is not required. + * + * Note: despite @color being unpremultiplied here, interpolation in + * gradients shall happen in premultiplied space. See the OpenType spec + * [COLR](https://learn.microsoft.com/en-us/typography/opentype/spec/colr) + * section for details. + * + * Since: 7.0.0 + */ +typedef struct { + float offset; + hb_bool_t is_foreground; + hb_color_t color; +} hb_color_stop_t; + +/** + * hb_paint_extend_t: + * @HB_PAINT_EXTEND_PAD: Outside the defined interval, + * the color of the closest color stop is used. + * @HB_PAINT_EXTEND_REPEAT: The color line is repeated over + * repeated multiples of the defined interval + * @HB_PAINT_EXTEND_REFLECT: The color line is repeated over + * repeated intervals, as for the repeat mode. + * However, in each repeated interval, the ordering of + * color stops is the reverse of the adjacent interval. + * + * The values of this enumeration determine how color values + * outside the minimum and maximum defined offset on a #hb_color_line_t + * are determined. + * + * See the OpenType spec [COLR](https://learn.microsoft.com/en-us/typography/opentype/spec/colr) + * section for details. + * + * Since: 7.0.0 + */ +typedef enum { + HB_PAINT_EXTEND_PAD, + HB_PAINT_EXTEND_REPEAT, + HB_PAINT_EXTEND_REFLECT +} hb_paint_extend_t; + +typedef struct hb_color_line_t hb_color_line_t; + +/** + * hb_color_line_get_color_stops_func_t: + * @color_line: a #hb_color_line_t object + * @color_line_data: the data accompanying @color_line + * @start: the index of the first color stop to return + * @count: (inout) (optional): Input = the maximum number of feature tags to return; + * Output = the actual number of feature tags returned (may be zero) + * @color_stops: (out) (array length=count) (optional): Array of #hb_color_stop_t to populate + * @user_data: the data accompanying this method + * + * A virtual method for the #hb_color_line_t to fetch color stops. + * + * Return value: the total number of color stops in @color_line + * + * Since: 7.0.0 + */ +typedef unsigned int (*hb_color_line_get_color_stops_func_t) (hb_color_line_t *color_line, + void *color_line_data, + unsigned int start, + unsigned int *count, + hb_color_stop_t *color_stops, + void *user_data); + +/** + * hb_color_line_get_extend_func_t: + * @color_line: a #hb_color_line_t object + * @color_line_data: the data accompanying @color_line + * @user_data: the data accompanying this method + * + * A virtual method for the @hb_color_line_t to fetches the extend mode. + * + * Return value: the extend mode of @color_line + * + * Since: 7.0.0 + */ +typedef hb_paint_extend_t (*hb_color_line_get_extend_func_t) (hb_color_line_t *color_line, + void *color_line_data, + void *user_data); + +/** + * hb_color_line_t: + * + * A struct containing color information for a gradient. + * + * Since: 7.0.0 + */ +struct hb_color_line_t { + void *data; + + hb_color_line_get_color_stops_func_t get_color_stops; + void *get_color_stops_user_data; + + hb_color_line_get_extend_func_t get_extend; + void *get_extend_user_data; + + void *reserved0; + void *reserved1; + void *reserved2; + void *reserved3; + void *reserved5; + void *reserved6; + void *reserved7; + void *reserved8; +}; + +HB_EXTERN unsigned int +hb_color_line_get_color_stops (hb_color_line_t *color_line, + unsigned int start, + unsigned int *count, + hb_color_stop_t *color_stops); + +HB_EXTERN hb_paint_extend_t +hb_color_line_get_extend (hb_color_line_t *color_line); + +/** + * hb_paint_linear_gradient_func_t: + * @funcs: paint functions object + * @paint_data: The data accompanying the paint functions in hb_font_paint_glyph() + * @color_line: Color information for the gradient + * @x0: X coordinate of the first point + * @y0: Y coordinate of the first point + * @x1: X coordinate of the second point + * @y1: Y coordinate of the second point + * @x2: X coordinate of the third point + * @y2: Y coordinate of the third point + * @user_data: User data pointer passed to hb_paint_funcs_set_linear_gradient_func() + * + * A virtual method for the #hb_paint_funcs_t to paint a linear + * gradient everywhere within the current clip. + * + * The @color_line object contains information about the colors of the gradients. + * It is only valid for the duration of the callback, you cannot keep it around. + * + * The coordinates of the points are interpreted according + * to the current transform. + * + * See the OpenType spec [COLR](https://learn.microsoft.com/en-us/typography/opentype/spec/colr) + * section for details on how the points define the direction + * of the gradient, and how to interpret the @color_line. + * + * Since: 7.0.0 + */ +typedef void (*hb_paint_linear_gradient_func_t) (hb_paint_funcs_t *funcs, + void *paint_data, + hb_color_line_t *color_line, + float x0, float y0, + float x1, float y1, + float x2, float y2, + void *user_data); + +/** + * hb_paint_radial_gradient_func_t: + * @funcs: paint functions object + * @paint_data: The data accompanying the paint functions in hb_font_paint_glyph() + * @color_line: Color information for the gradient + * @x0: X coordinate of the first circle's center + * @y0: Y coordinate of the first circle's center + * @r0: radius of the first circle + * @x1: X coordinate of the second circle's center + * @y1: Y coordinate of the second circle's center + * @r1: radius of the second circle + * @user_data: User data pointer passed to hb_paint_funcs_set_radial_gradient_func() + * + * A virtual method for the #hb_paint_funcs_t to paint a radial + * gradient everywhere within the current clip. + * + * The @color_line object contains information about the colors of the gradients. + * It is only valid for the duration of the callback, you cannot keep it around. + * + * The coordinates of the points are interpreted according + * to the current transform. + * + * See the OpenType spec [COLR](https://learn.microsoft.com/en-us/typography/opentype/spec/colr) + * section for details on how the points define the direction + * of the gradient, and how to interpret the @color_line. + * + * Since: 7.0.0 + */ +typedef void (*hb_paint_radial_gradient_func_t) (hb_paint_funcs_t *funcs, + void *paint_data, + hb_color_line_t *color_line, + float x0, float y0, float r0, + float x1, float y1, float r1, + void *user_data); + +/** + * hb_paint_sweep_gradient_func_t: + * @funcs: paint functions object + * @paint_data: The data accompanying the paint functions in hb_font_paint_glyph() + * @color_line: Color information for the gradient + * @x0: X coordinate of the circle's center + * @y0: Y coordinate of the circle's center + * @start_angle: the start angle, in radians + * @end_angle: the end angle, in radians + * @user_data: User data pointer passed to hb_paint_funcs_set_sweep_gradient_func() + * + * A virtual method for the #hb_paint_funcs_t to paint a sweep + * gradient everywhere within the current clip. + * + * The @color_line object contains information about the colors of the gradients. + * It is only valid for the duration of the callback, you cannot keep it around. + * + * The coordinates of the points are interpreted according + * to the current transform. + * + * See the OpenType spec [COLR](https://learn.microsoft.com/en-us/typography/opentype/spec/colr) + * section for details on how the points define the direction + * of the gradient, and how to interpret the @color_line. + * + * Since: 7.0.0 + */ +typedef void (*hb_paint_sweep_gradient_func_t) (hb_paint_funcs_t *funcs, + void *paint_data, + hb_color_line_t *color_line, + float x0, float y0, + float start_angle, + float end_angle, + void *user_data); + +/** + * hb_paint_composite_mode_t: + * @HB_PAINT_COMPOSITE_MODE_CLEAR: clear destination layer (bounded) + * @HB_PAINT_COMPOSITE_MODE_SRC: replace destination layer (bounded) + * @HB_PAINT_COMPOSITE_MODE_SRC_OVER: draw source layer on top of destination layer + * (bounded) + * @HB_PAINT_COMPOSITE_MODE_SRC_IN: draw source where there was destination content + * (unbounded) + * @HB_PAINT_COMPOSITE_MODE_SRC_OUT: draw source where there was no destination + * content (unbounded) + * @HB_PAINT_COMPOSITE_MODE_SRC_ATOP: draw source on top of destination content and + * only there + * @HB_PAINT_COMPOSITE_MODE_DEST: ignore the source + * @HB_PAINT_COMPOSITE_MODE_DEST_OVER: draw destination on top of source + * @HB_PAINT_COMPOSITE_MODE_DEST_IN: leave destination only where there was + * source content (unbounded) + * @HB_PAINT_COMPOSITE_MODE_DEST_OUT: leave destination only where there was no + * source content + * @HB_PAINT_COMPOSITE_MODE_DEST_ATOP: leave destination on top of source content + * and only there (unbounded) + * @HB_PAINT_COMPOSITE_MODE_XOR: source and destination are shown where there is only + * one of them + * @HB_PAINT_COMPOSITE_MODE_PLUS: source and destination layers are accumulated + * @HB_PAINT_COMPOSITE_MODE_MULTIPLY: source and destination layers are multiplied. + * This causes the result to be at least as dark as the darker inputs. + * @HB_PAINT_COMPOSITE_MODE_SCREEN: source and destination are complemented and + * multiplied. This causes the result to be at least as light as the lighter + * inputs. + * @HB_PAINT_COMPOSITE_MODE_OVERLAY: multiplies or screens, depending on the + * lightness of the destination color. + * @HB_PAINT_COMPOSITE_MODE_DARKEN: replaces the destination with the source if it + * is darker, otherwise keeps the source. + * @HB_PAINT_COMPOSITE_MODE_LIGHTEN: replaces the destination with the source if it + * is lighter, otherwise keeps the source. + * @HB_PAINT_COMPOSITE_MODE_COLOR_DODGE: brightens the destination color to reflect + * the source color. + * @HB_PAINT_COMPOSITE_MODE_COLOR_BURN: darkens the destination color to reflect + * the source color. + * @HB_PAINT_COMPOSITE_MODE_HARD_LIGHT: Multiplies or screens, dependent on source + * color. + * @HB_PAINT_COMPOSITE_MODE_SOFT_LIGHT: Darkens or lightens, dependent on source + * color. + * @HB_PAINT_COMPOSITE_MODE_DIFFERENCE: Takes the difference of the source and + * destination color. + * @HB_PAINT_COMPOSITE_MODE_EXCLUSION: Produces an effect similar to difference, but + * with lower contrast. + * @HB_PAINT_COMPOSITE_MODE_HSL_HUE: Creates a color with the hue of the source + * and the saturation and luminosity of the target. + * @HB_PAINT_COMPOSITE_MODE_HSL_SATURATION: Creates a color with the saturation + * of the source and the hue and luminosity of the target. Painting with + * this mode onto a gray area produces no change. + * @HB_PAINT_COMPOSITE_MODE_HSL_COLOR: Creates a color with the hue and saturation + * of the source and the luminosity of the target. This preserves the gray + * levels of the target and is useful for coloring monochrome images or + * tinting color images. + * @HB_PAINT_COMPOSITE_MODE_HSL_LUMINOSITY: Creates a color with the luminosity of + * the source and the hue and saturation of the target. This produces an + * inverse effect to @HB_PAINT_COMPOSITE_MODE_HSL_COLOR. + * + * The values of this enumeration describe the compositing modes + * that can be used when combining temporary redirected drawing + * with the backdrop. + * + * See the OpenType spec [COLR](https://learn.microsoft.com/en-us/typography/opentype/spec/colr) + * section for details. + * + * Since: 7.0.0 + */ +typedef enum { + HB_PAINT_COMPOSITE_MODE_CLEAR, + HB_PAINT_COMPOSITE_MODE_SRC, + HB_PAINT_COMPOSITE_MODE_DEST, + HB_PAINT_COMPOSITE_MODE_SRC_OVER, + HB_PAINT_COMPOSITE_MODE_DEST_OVER, + HB_PAINT_COMPOSITE_MODE_SRC_IN, + HB_PAINT_COMPOSITE_MODE_DEST_IN, + HB_PAINT_COMPOSITE_MODE_SRC_OUT, + HB_PAINT_COMPOSITE_MODE_DEST_OUT, + HB_PAINT_COMPOSITE_MODE_SRC_ATOP, + HB_PAINT_COMPOSITE_MODE_DEST_ATOP, + HB_PAINT_COMPOSITE_MODE_XOR, + HB_PAINT_COMPOSITE_MODE_PLUS, + HB_PAINT_COMPOSITE_MODE_SCREEN, + HB_PAINT_COMPOSITE_MODE_OVERLAY, + HB_PAINT_COMPOSITE_MODE_DARKEN, + HB_PAINT_COMPOSITE_MODE_LIGHTEN, + HB_PAINT_COMPOSITE_MODE_COLOR_DODGE, + HB_PAINT_COMPOSITE_MODE_COLOR_BURN, + HB_PAINT_COMPOSITE_MODE_HARD_LIGHT, + HB_PAINT_COMPOSITE_MODE_SOFT_LIGHT, + HB_PAINT_COMPOSITE_MODE_DIFFERENCE, + HB_PAINT_COMPOSITE_MODE_EXCLUSION, + HB_PAINT_COMPOSITE_MODE_MULTIPLY, + HB_PAINT_COMPOSITE_MODE_HSL_HUE, + HB_PAINT_COMPOSITE_MODE_HSL_SATURATION, + HB_PAINT_COMPOSITE_MODE_HSL_COLOR, + HB_PAINT_COMPOSITE_MODE_HSL_LUMINOSITY +} hb_paint_composite_mode_t; + +/** + * hb_paint_push_group_func_t: + * @funcs: paint functions object + * @paint_data: The data accompanying the paint functions in hb_font_paint_glyph() + * @user_data: User data pointer passed to hb_paint_funcs_set_push_group_func() + * + * A virtual method for the #hb_paint_funcs_t to use + * an intermediate surface for subsequent paint calls. + * + * The drawing will be redirected to an intermediate surface + * until a matching call to the #hb_paint_funcs_pop_group_func_t + * vfunc. + * + * Since: 7.0.0 + */ +typedef void (*hb_paint_push_group_func_t) (hb_paint_funcs_t *funcs, + void *paint_data, + void *user_data); + +/** + * hb_paint_pop_group_func_t: + * @funcs: paint functions object + * @paint_data: The data accompanying the paint functions in hb_font_paint_glyph() + * @mode: the compositing mode to use + * @user_data: User data pointer passed to hb_paint_funcs_set_pop_group_func() + * + * A virtual method for the #hb_paint_funcs_t to undo + * the effect of a prior call to the #hb_paint_funcs_push_group_func_t + * vfunc. + * + * This call stops the redirection to the intermediate surface, + * and then composites it on the previous surface, using the + * compositing mode passed to this call. + * + * Since: 7.0.0 + */ +typedef void (*hb_paint_pop_group_func_t) (hb_paint_funcs_t *funcs, + void *paint_data, + hb_paint_composite_mode_t mode, + void *user_data); + +/** + * hb_paint_custom_palette_color_func_t: + * @funcs: paint functions object + * @paint_data: The data accompanying the paint functions in hb_font_paint_glyph() + * @color_index: the color index + * @color: (out): fetched color + * @user_data: User data pointer passed to hb_paint_funcs_set_pop_group_func() + * + * A virtual method for the #hb_paint_funcs_t to fetch a color from the custom + * color palette. + * + * Custom palette colors override the colors from the fonts selected color + * palette. It is not necessary to override all palette entries; for entries + * that should be taken from the font palette, return `false`. + * + * This function might get called multiple times, but the custom palette is + * expected to remain unchanged for duration of a hb_font_paint_glyph() call. + * + * Return value: `true` if found, `false` otherwise + * + * Since: 7.0.0 + */ +typedef hb_bool_t (*hb_paint_custom_palette_color_func_t) (hb_paint_funcs_t *funcs, + void *paint_data, + unsigned int color_index, + hb_color_t *color, + void *user_data); + + +/** + * hb_paint_funcs_set_push_transform_func: + * @funcs: A paint functions struct + * @func: (closure user_data) (destroy destroy) (scope notified): The push-transform callback + * @user_data: Data to pass to @func + * @destroy: (nullable): Function to call when @user_data is no longer needed + * + * Sets the push-transform callback on the paint functions struct. + * + * Since: 7.0.0 + */ +HB_EXTERN void +hb_paint_funcs_set_push_transform_func (hb_paint_funcs_t *funcs, + hb_paint_push_transform_func_t func, + void *user_data, + hb_destroy_func_t destroy); + +/** + * hb_paint_funcs_set_pop_transform_func: + * @funcs: A paint functions struct + * @func: (closure user_data) (destroy destroy) (scope notified): The pop-transform callback + * @user_data: Data to pass to @func + * @destroy: (nullable): Function to call when @user_data is no longer needed + * + * Sets the pop-transform callback on the paint functions struct. + * + * Since: 7.0.0 + */ +HB_EXTERN void +hb_paint_funcs_set_pop_transform_func (hb_paint_funcs_t *funcs, + hb_paint_pop_transform_func_t func, + void *user_data, + hb_destroy_func_t destroy); + +/** + * hb_paint_funcs_set_color_glyph_func: + * @funcs: A paint functions struct + * @func: (closure user_data) (destroy destroy) (scope notified): The color-glyph callback + * @user_data: Data to pass to @func + * @destroy: (nullable): Function to call when @user_data is no longer needed + * + * Sets the color-glyph callback on the paint functions struct. + * + * Since: 8.2.0 + */ +HB_EXTERN void +hb_paint_funcs_set_color_glyph_func (hb_paint_funcs_t *funcs, + hb_paint_color_glyph_func_t func, + void *user_data, + hb_destroy_func_t destroy); + +/** + * hb_paint_funcs_set_push_clip_glyph_func: + * @funcs: A paint functions struct + * @func: (closure user_data) (destroy destroy) (scope notified): The push-clip-glyph callback + * @user_data: Data to pass to @func + * @destroy: (nullable): Function to call when @user_data is no longer needed + * + * Sets the push-clip-glyph callback on the paint functions struct. + * + * Since: 7.0.0 + */ +HB_EXTERN void +hb_paint_funcs_set_push_clip_glyph_func (hb_paint_funcs_t *funcs, + hb_paint_push_clip_glyph_func_t func, + void *user_data, + hb_destroy_func_t destroy); + +/** + * hb_paint_funcs_set_push_clip_rectangle_func: + * @funcs: A paint functions struct + * @func: (closure user_data) (destroy destroy) (scope notified): The push-clip-rectangle callback + * @user_data: Data to pass to @func + * @destroy: (nullable): Function to call when @user_data is no longer needed + * + * Sets the push-clip-rect callback on the paint functions struct. + * + * Since: 7.0.0 + */ +HB_EXTERN void +hb_paint_funcs_set_push_clip_rectangle_func (hb_paint_funcs_t *funcs, + hb_paint_push_clip_rectangle_func_t func, + void *user_data, + hb_destroy_func_t destroy); + +/** + * hb_paint_funcs_set_pop_clip_func: + * @funcs: A paint functions struct + * @func: (closure user_data) (destroy destroy) (scope notified): The pop-clip callback + * @user_data: Data to pass to @func + * @destroy: (nullable): Function to call when @user_data is no longer needed + * + * Sets the pop-clip callback on the paint functions struct. + * + * Since: 7.0.0 + */ +HB_EXTERN void +hb_paint_funcs_set_pop_clip_func (hb_paint_funcs_t *funcs, + hb_paint_pop_clip_func_t func, + void *user_data, + hb_destroy_func_t destroy); + +/** + * hb_paint_funcs_set_color_func: + * @funcs: A paint functions struct + * @func: (closure user_data) (destroy destroy) (scope notified): The paint-color callback + * @user_data: Data to pass to @func + * @destroy: (nullable): Function to call when @user_data is no longer needed + * + * Sets the paint-color callback on the paint functions struct. + * + * Since: 7.0.0 + */ +HB_EXTERN void +hb_paint_funcs_set_color_func (hb_paint_funcs_t *funcs, + hb_paint_color_func_t func, + void *user_data, + hb_destroy_func_t destroy); + +/** + * hb_paint_funcs_set_image_func: + * @funcs: A paint functions struct + * @func: (closure user_data) (destroy destroy) (scope notified): The paint-image callback + * @user_data: Data to pass to @func + * @destroy: (nullable): Function to call when @user_data is no longer needed + * + * Sets the paint-image callback on the paint functions struct. + * + * Since: 7.0.0 + */ +HB_EXTERN void +hb_paint_funcs_set_image_func (hb_paint_funcs_t *funcs, + hb_paint_image_func_t func, + void *user_data, + hb_destroy_func_t destroy); + +/** + * hb_paint_funcs_set_linear_gradient_func: + * @funcs: A paint functions struct + * @func: (closure user_data) (destroy destroy) (scope notified): The linear-gradient callback + * @user_data: Data to pass to @func + * @destroy: (nullable): Function to call when @user_data is no longer needed + * + * Sets the linear-gradient callback on the paint functions struct. + * + * Since: 7.0.0 + */ +HB_EXTERN void +hb_paint_funcs_set_linear_gradient_func (hb_paint_funcs_t *funcs, + hb_paint_linear_gradient_func_t func, + void *user_data, + hb_destroy_func_t destroy); + +/** + * hb_paint_funcs_set_radial_gradient_func: + * @funcs: A paint functions struct + * @func: (closure user_data) (destroy destroy) (scope notified): The radial-gradient callback + * @user_data: Data to pass to @func + * @destroy: (nullable): Function to call when @user_data is no longer needed + * + * Sets the radial-gradient callback on the paint functions struct. + * + * Since: 7.0.0 + */ +HB_EXTERN void +hb_paint_funcs_set_radial_gradient_func (hb_paint_funcs_t *funcs, + hb_paint_radial_gradient_func_t func, + void *user_data, + hb_destroy_func_t destroy); + +/** + * hb_paint_funcs_set_sweep_gradient_func: + * @funcs: A paint functions struct + * @func: (closure user_data) (destroy destroy) (scope notified): The sweep-gradient callback + * @user_data: Data to pass to @func + * @destroy: (nullable): Function to call when @user_data is no longer needed + * + * Sets the sweep-gradient callback on the paint functions struct. + * + * Since: 7.0.0 + */ +HB_EXTERN void +hb_paint_funcs_set_sweep_gradient_func (hb_paint_funcs_t *funcs, + hb_paint_sweep_gradient_func_t func, + void *user_data, + hb_destroy_func_t destroy); + +/** + * hb_paint_funcs_set_push_group_func: + * @funcs: A paint functions struct + * @func: (closure user_data) (destroy destroy) (scope notified): The push-group callback + * @user_data: Data to pass to @func + * @destroy: (nullable): Function to call when @user_data is no longer needed + * + * Sets the push-group callback on the paint functions struct. + * + * Since: 7.0.0 + */ +HB_EXTERN void +hb_paint_funcs_set_push_group_func (hb_paint_funcs_t *funcs, + hb_paint_push_group_func_t func, + void *user_data, + hb_destroy_func_t destroy); + +/** + * hb_paint_funcs_set_pop_group_func: + * @funcs: A paint functions struct + * @func: (closure user_data) (destroy destroy) (scope notified): The pop-group callback + * @user_data: Data to pass to @func + * @destroy: (nullable): Function to call when @user_data is no longer needed + * + * Sets the pop-group callback on the paint functions struct. + * + * Since: 7.0.0 + */ +HB_EXTERN void +hb_paint_funcs_set_pop_group_func (hb_paint_funcs_t *funcs, + hb_paint_pop_group_func_t func, + void *user_data, + hb_destroy_func_t destroy); + +/** + * hb_paint_funcs_set_custom_palette_color_func: + * @funcs: A paint functions struct + * @func: (closure user_data) (destroy destroy) (scope notified): The custom-palette-color callback + * @user_data: Data to pass to @func + * @destroy: (nullable): Function to call when @user_data is no longer needed + * + * Sets the custom-palette-color callback on the paint functions struct. + * + * Since: 7.0.0 + */ +HB_EXTERN void +hb_paint_funcs_set_custom_palette_color_func (hb_paint_funcs_t *funcs, + hb_paint_custom_palette_color_func_t func, + void *user_data, + hb_destroy_func_t destroy); +/* + * Manual API + */ + +HB_EXTERN void +hb_paint_push_transform (hb_paint_funcs_t *funcs, void *paint_data, + float xx, float yx, + float xy, float yy, + float dx, float dy); + +HB_EXTERN void +hb_paint_push_font_transform (hb_paint_funcs_t *funcs, void *paint_data, + const hb_font_t *font); + +HB_EXTERN void +hb_paint_push_inverse_font_transform (hb_paint_funcs_t *funcs, void *paint_data, + const hb_font_t *font); + +HB_EXTERN void +hb_paint_pop_transform (hb_paint_funcs_t *funcs, void *paint_data); + +HB_EXTERN hb_bool_t +hb_paint_color_glyph (hb_paint_funcs_t *funcs, void *paint_data, + hb_codepoint_t glyph, + hb_font_t *font); + +HB_EXTERN void +hb_paint_push_clip_glyph (hb_paint_funcs_t *funcs, void *paint_data, + hb_codepoint_t glyph, + hb_font_t *font); + +HB_EXTERN void +hb_paint_push_clip_rectangle (hb_paint_funcs_t *funcs, void *paint_data, + float xmin, float ymin, + float xmax, float ymax); + +HB_EXTERN void +hb_paint_pop_clip (hb_paint_funcs_t *funcs, void *paint_data); + +HB_EXTERN void +hb_paint_color (hb_paint_funcs_t *funcs, void *paint_data, + hb_bool_t is_foreground, + hb_color_t color); + +HB_EXTERN void +hb_paint_image (hb_paint_funcs_t *funcs, void *paint_data, + hb_blob_t *image, + unsigned int width, + unsigned int height, + hb_tag_t format, + float slant, + hb_glyph_extents_t *extents); + +HB_EXTERN void +hb_paint_linear_gradient (hb_paint_funcs_t *funcs, void *paint_data, + hb_color_line_t *color_line, + float x0, float y0, + float x1, float y1, + float x2, float y2); + +HB_EXTERN void +hb_paint_radial_gradient (hb_paint_funcs_t *funcs, void *paint_data, + hb_color_line_t *color_line, + float x0, float y0, + float r0, + float x1, float y1, + float r1); + +HB_EXTERN void +hb_paint_sweep_gradient (hb_paint_funcs_t *funcs, void *paint_data, + hb_color_line_t *color_line, + float x0, float y0, + float start_angle, float end_angle); + +HB_EXTERN void +hb_paint_push_group (hb_paint_funcs_t *funcs, void *paint_data); + +HB_EXTERN void +hb_paint_pop_group (hb_paint_funcs_t *funcs, void *paint_data, + hb_paint_composite_mode_t mode); + +HB_EXTERN hb_bool_t +hb_paint_custom_palette_color (hb_paint_funcs_t *funcs, void *paint_data, + unsigned int color_index, + hb_color_t *color); + +HB_END_DECLS + +#endif /* HB_PAINT_H */ diff --git a/dependencies/linux64/include/harfbuzz/hb-script-list.h b/dependencies/linux64/include/harfbuzz/hb-script-list.h new file mode 100644 index 0000000..88e270d --- /dev/null +++ b/dependencies/linux64/include/harfbuzz/hb-script-list.h @@ -0,0 +1,484 @@ +/* + * Copyright © 2007,2008,2009 Red Hat, Inc. + * Copyright © 2011,2012 Google, Inc. + * + * This is part of HarfBuzz, a text shaping library. + * + * Permission is hereby granted, without written agreement and without + * license or royalty fees, to use, copy, modify, and distribute this + * software and its documentation for any purpose, provided that the + * above copyright notice and the following two paragraphs appear in + * all copies of this software. + * + * IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE TO ANY PARTY FOR + * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES + * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN + * IF THE COPYRIGHT HOLDER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + * THE COPYRIGHT HOLDER SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, + * BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND + * FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS + * ON AN "AS IS" BASIS, AND THE COPYRIGHT HOLDER HAS NO OBLIGATION TO + * PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. + * + * Red Hat Author(s): Behdad Esfahbod + * Google Author(s): Behdad Esfahbod + */ + +#if !defined(HB_H_IN) && !defined(HB_NO_SINGLE_HEADER_ERROR) +#error "Include instead." +#endif + +#ifndef HB_SCRIPT_LIST_H +#define HB_SCRIPT_LIST_H + +/* This file belongs to the middle of hb-common.h. + * The reason it has been surgically extracted is because + * FreeType imports types and enums from hb-common.h, + * and since this enum is large and growing, we want to + * make it easy to just copy the file over to FreeType. + * https://github.com/harfbuzz/harfbuzz/issues/5271 + */ + +/* Dummy lines to make our checks happy. */ +#if 0 +#include "hb-common.h" +HB_BEGIN_DECLS +HB_END_DECLS +#endif + + +/** + * hb_script_t: + * @HB_SCRIPT_COMMON: `Zyyy` + * @HB_SCRIPT_INHERITED: `Zinh` + * @HB_SCRIPT_UNKNOWN: `Zzzz` + * @HB_SCRIPT_ARABIC: `Arab` + * @HB_SCRIPT_ARMENIAN: `Armn` + * @HB_SCRIPT_BENGALI: `Beng` + * @HB_SCRIPT_CYRILLIC: `Cyrl` + * @HB_SCRIPT_DEVANAGARI: `Deva` + * @HB_SCRIPT_GEORGIAN: `Geor` + * @HB_SCRIPT_GREEK: `Grek` + * @HB_SCRIPT_GUJARATI: `Gujr` + * @HB_SCRIPT_GURMUKHI: `Guru` + * @HB_SCRIPT_HANGUL: `Hang` + * @HB_SCRIPT_HAN: `Hani` + * @HB_SCRIPT_HEBREW: `Hebr` + * @HB_SCRIPT_HIRAGANA: `Hira` + * @HB_SCRIPT_KANNADA: `Knda` + * @HB_SCRIPT_KATAKANA: `Kana` + * @HB_SCRIPT_LAO: `Laoo` + * @HB_SCRIPT_LATIN: `Latn` + * @HB_SCRIPT_MALAYALAM: `Mlym` + * @HB_SCRIPT_ORIYA: `Orya` + * @HB_SCRIPT_TAMIL: `Taml` + * @HB_SCRIPT_TELUGU: `Telu` + * @HB_SCRIPT_THAI: `Thai` + * @HB_SCRIPT_TIBETAN: `Tibt` + * @HB_SCRIPT_BOPOMOFO: `Bopo` + * @HB_SCRIPT_BRAILLE: `Brai` + * @HB_SCRIPT_CANADIAN_SYLLABICS: `Cans` + * @HB_SCRIPT_CHEROKEE: `Cher` + * @HB_SCRIPT_ETHIOPIC: `Ethi` + * @HB_SCRIPT_KHMER: `Khmr` + * @HB_SCRIPT_MONGOLIAN: `Mong` + * @HB_SCRIPT_MYANMAR: `Mymr` + * @HB_SCRIPT_OGHAM: `Ogam` + * @HB_SCRIPT_RUNIC: `Runr` + * @HB_SCRIPT_SINHALA: `Sinh` + * @HB_SCRIPT_SYRIAC: `Syrc` + * @HB_SCRIPT_THAANA: `Thaa` + * @HB_SCRIPT_YI: `Yiii` + * @HB_SCRIPT_DESERET: `Dsrt` + * @HB_SCRIPT_GOTHIC: `Goth` + * @HB_SCRIPT_OLD_ITALIC: `Ital` + * @HB_SCRIPT_BUHID: `Buhd` + * @HB_SCRIPT_HANUNOO: `Hano` + * @HB_SCRIPT_TAGALOG: `Tglg` + * @HB_SCRIPT_TAGBANWA: `Tagb` + * @HB_SCRIPT_CYPRIOT: `Cprt` + * @HB_SCRIPT_LIMBU: `Limb` + * @HB_SCRIPT_LINEAR_B: `Linb` + * @HB_SCRIPT_OSMANYA: `Osma` + * @HB_SCRIPT_SHAVIAN: `Shaw` + * @HB_SCRIPT_TAI_LE: `Tale` + * @HB_SCRIPT_UGARITIC: `Ugar` + * @HB_SCRIPT_BUGINESE: `Bugi` + * @HB_SCRIPT_COPTIC: `Copt` + * @HB_SCRIPT_GLAGOLITIC: `Glag` + * @HB_SCRIPT_KHAROSHTHI: `Khar` + * @HB_SCRIPT_NEW_TAI_LUE: `Talu` + * @HB_SCRIPT_OLD_PERSIAN: `Xpeo` + * @HB_SCRIPT_SYLOTI_NAGRI: `Sylo` + * @HB_SCRIPT_TIFINAGH: `Tfng` + * @HB_SCRIPT_BALINESE: `Bali` + * @HB_SCRIPT_CUNEIFORM: `Xsux` + * @HB_SCRIPT_NKO: `Nkoo` + * @HB_SCRIPT_PHAGS_PA: `Phag` + * @HB_SCRIPT_PHOENICIAN: `Phnx` + * @HB_SCRIPT_CARIAN: `Cari` + * @HB_SCRIPT_CHAM: `Cham` + * @HB_SCRIPT_KAYAH_LI: `Kali` + * @HB_SCRIPT_LEPCHA: `Lepc` + * @HB_SCRIPT_LYCIAN: `Lyci` + * @HB_SCRIPT_LYDIAN: `Lydi` + * @HB_SCRIPT_OL_CHIKI: `Olck` + * @HB_SCRIPT_REJANG: `Rjng` + * @HB_SCRIPT_SAURASHTRA: `Saur` + * @HB_SCRIPT_SUNDANESE: `Sund` + * @HB_SCRIPT_VAI: `Vaii` + * @HB_SCRIPT_AVESTAN: `Avst` + * @HB_SCRIPT_BAMUM: `Bamu` + * @HB_SCRIPT_EGYPTIAN_HIEROGLYPHS: `Egyp` + * @HB_SCRIPT_IMPERIAL_ARAMAIC: `Armi` + * @HB_SCRIPT_INSCRIPTIONAL_PAHLAVI: `Phli` + * @HB_SCRIPT_INSCRIPTIONAL_PARTHIAN: `Prti` + * @HB_SCRIPT_JAVANESE: `Java` + * @HB_SCRIPT_KAITHI: `Kthi` + * @HB_SCRIPT_LISU: `Lisu` + * @HB_SCRIPT_MEETEI_MAYEK: `Mtei` + * @HB_SCRIPT_OLD_SOUTH_ARABIAN: `Sarb` + * @HB_SCRIPT_OLD_TURKIC: `Orkh` + * @HB_SCRIPT_SAMARITAN: `Samr` + * @HB_SCRIPT_TAI_THAM: `Lana` + * @HB_SCRIPT_TAI_VIET: `Tavt` + * @HB_SCRIPT_BATAK: `Batk` + * @HB_SCRIPT_BRAHMI: `Brah` + * @HB_SCRIPT_MANDAIC: `Mand` + * @HB_SCRIPT_CHAKMA: `Cakm` + * @HB_SCRIPT_MEROITIC_CURSIVE: `Merc` + * @HB_SCRIPT_MEROITIC_HIEROGLYPHS: `Mero` + * @HB_SCRIPT_MIAO: `Plrd` + * @HB_SCRIPT_SHARADA: `Shrd` + * @HB_SCRIPT_SORA_SOMPENG: `Sora` + * @HB_SCRIPT_TAKRI: `Takr` + * @HB_SCRIPT_BASSA_VAH: `Bass`, Since: 0.9.30 + * @HB_SCRIPT_CAUCASIAN_ALBANIAN: `Aghb`, Since: 0.9.30 + * @HB_SCRIPT_DUPLOYAN: `Dupl`, Since: 0.9.30 + * @HB_SCRIPT_ELBASAN: `Elba`, Since: 0.9.30 + * @HB_SCRIPT_GRANTHA: `Gran`, Since: 0.9.30 + * @HB_SCRIPT_KHOJKI: `Khoj`, Since: 0.9.30 + * @HB_SCRIPT_KHUDAWADI: `Sind`, Since: 0.9.30 + * @HB_SCRIPT_LINEAR_A: `Lina`, Since: 0.9.30 + * @HB_SCRIPT_MAHAJANI: `Mahj`, Since: 0.9.30 + * @HB_SCRIPT_MANICHAEAN: `Mani`, Since: 0.9.30 + * @HB_SCRIPT_MENDE_KIKAKUI: `Mend`, Since: 0.9.30 + * @HB_SCRIPT_MODI: `Modi`, Since: 0.9.30 + * @HB_SCRIPT_MRO: `Mroo`, Since: 0.9.30 + * @HB_SCRIPT_NABATAEAN: `Nbat`, Since: 0.9.30 + * @HB_SCRIPT_OLD_NORTH_ARABIAN: `Narb`, Since: 0.9.30 + * @HB_SCRIPT_OLD_PERMIC: `Perm`, Since: 0.9.30 + * @HB_SCRIPT_PAHAWH_HMONG: `Hmng`, Since: 0.9.30 + * @HB_SCRIPT_PALMYRENE: `Palm`, Since: 0.9.30 + * @HB_SCRIPT_PAU_CIN_HAU: `Pauc`, Since: 0.9.30 + * @HB_SCRIPT_PSALTER_PAHLAVI: `Phlp`, Since: 0.9.30 + * @HB_SCRIPT_SIDDHAM: `Sidd`, Since: 0.9.30 + * @HB_SCRIPT_TIRHUTA: `Tirh`, Since: 0.9.30 + * @HB_SCRIPT_WARANG_CITI: `Wara`, Since: 0.9.30 + * @HB_SCRIPT_AHOM: `Ahom`, Since: 0.9.30 + * @HB_SCRIPT_ANATOLIAN_HIEROGLYPHS: `Hluw`, Since: 0.9.30 + * @HB_SCRIPT_HATRAN: `Hatr`, Since: 0.9.30 + * @HB_SCRIPT_MULTANI: `Mult`, Since: 0.9.30 + * @HB_SCRIPT_OLD_HUNGARIAN: `Hung`, Since: 0.9.30 + * @HB_SCRIPT_SIGNWRITING: `Sgnw`, Since: 0.9.30 + * @HB_SCRIPT_ADLAM: `Adlm`, Since: 1.3.0 + * @HB_SCRIPT_BHAIKSUKI: `Bhks`, Since: 1.3.0 + * @HB_SCRIPT_MARCHEN: `Marc`, Since: 1.3.0 + * @HB_SCRIPT_OSAGE: `Osge`, Since: 1.3.0 + * @HB_SCRIPT_TANGUT: `Tang`, Since: 1.3.0 + * @HB_SCRIPT_NEWA: `Newa`, Since: 1.3.0 + * @HB_SCRIPT_MASARAM_GONDI: `Gonm`, Since: 1.6.0 + * @HB_SCRIPT_NUSHU: `Nshu`, Since: 1.6.0 + * @HB_SCRIPT_SOYOMBO: `Soyo`, Since: 1.6.0 + * @HB_SCRIPT_ZANABAZAR_SQUARE: `Zanb`, Since: 1.6.0 + * @HB_SCRIPT_DOGRA: `Dogr`, Since: 1.8.0 + * @HB_SCRIPT_GUNJALA_GONDI: `Gong`, Since: 1.8.0 + * @HB_SCRIPT_HANIFI_ROHINGYA: `Rohg`, Since: 1.8.0 + * @HB_SCRIPT_MAKASAR: `Maka`, Since: 1.8.0 + * @HB_SCRIPT_MEDEFAIDRIN: `Medf`, Since: 1.8.0 + * @HB_SCRIPT_OLD_SOGDIAN: `Sogo`, Since: 1.8.0 + * @HB_SCRIPT_SOGDIAN: `Sogd`, Since: 1.8.0 + * @HB_SCRIPT_ELYMAIC: `Elym`, Since: 2.4.0 + * @HB_SCRIPT_NANDINAGARI: `Nand`, Since: 2.4.0 + * @HB_SCRIPT_NYIAKENG_PUACHUE_HMONG: `Hmnp`, Since: 2.4.0 + * @HB_SCRIPT_WANCHO: `Wcho`, Since: 2.4.0 + * @HB_SCRIPT_CHORASMIAN: `Chrs`, Since: 2.6.7 + * @HB_SCRIPT_DIVES_AKURU: `Diak`, Since: 2.6.7 + * @HB_SCRIPT_KHITAN_SMALL_SCRIPT: `Kits`, Since: 2.6.7 + * @HB_SCRIPT_YEZIDI: `Yezi`, Since: 2.6.7 + * @HB_SCRIPT_CYPRO_MINOAN: `Cpmn`, Since: 3.0.0 + * @HB_SCRIPT_OLD_UYGHUR: `Ougr`, Since: 3.0.0 + * @HB_SCRIPT_TANGSA: `Tnsa`, Since: 3.0.0 + * @HB_SCRIPT_TOTO: `Toto`, Since: 3.0.0 + * @HB_SCRIPT_VITHKUQI: `Vith`, Since: 3.0.0 + * @HB_SCRIPT_MATH: `Zmth`, Since: 3.4.0 + * @HB_SCRIPT_KAWI: `Kawi`, Since: 5.2.0 + * @HB_SCRIPT_NAG_MUNDARI: `Nagm`, Since: 5.2.0 + * @HB_SCRIPT_GARAY: `Gara`, Since: 10.0.0 + * @HB_SCRIPT_GURUNG_KHEMA: `Gukh`, Since: 10.0.0 + * @HB_SCRIPT_KIRAT_RAI: `Krai`, Since: 10.0.0 + * @HB_SCRIPT_OL_ONAL: `Onao`, Since: 10.0.0 + * @HB_SCRIPT_SUNUWAR: `Sunu`, Since: 10.0.0 + * @HB_SCRIPT_TODHRI: `Todr`, Since: 10.0.0 + * @HB_SCRIPT_TULU_TIGALARI: `Tutg`, Since: 10.0.0 + * @HB_SCRIPT_INVALID: No script set + * + * Data type for scripts. Each #hb_script_t's value is an #hb_tag_t corresponding + * to the four-letter values defined by [ISO 15924](https://unicode.org/iso15924/). + * + * See also the Script (sc) property of the Unicode Character Database. + * + **/ + +/* https://docs.google.com/spreadsheets/d/1Y90M0Ie3MUJ6UVCRDOypOtijlMDLNNyyLk36T6iMu0o */ +typedef enum +{ + HB_SCRIPT_COMMON = HB_TAG ('Z','y','y','y'), /*1.1*/ + HB_SCRIPT_INHERITED = HB_TAG ('Z','i','n','h'), /*1.1*/ + HB_SCRIPT_UNKNOWN = HB_TAG ('Z','z','z','z'), /*5.0*/ + + HB_SCRIPT_ARABIC = HB_TAG ('A','r','a','b'), /*1.1*/ + HB_SCRIPT_ARMENIAN = HB_TAG ('A','r','m','n'), /*1.1*/ + HB_SCRIPT_BENGALI = HB_TAG ('B','e','n','g'), /*1.1*/ + HB_SCRIPT_CYRILLIC = HB_TAG ('C','y','r','l'), /*1.1*/ + HB_SCRIPT_DEVANAGARI = HB_TAG ('D','e','v','a'), /*1.1*/ + HB_SCRIPT_GEORGIAN = HB_TAG ('G','e','o','r'), /*1.1*/ + HB_SCRIPT_GREEK = HB_TAG ('G','r','e','k'), /*1.1*/ + HB_SCRIPT_GUJARATI = HB_TAG ('G','u','j','r'), /*1.1*/ + HB_SCRIPT_GURMUKHI = HB_TAG ('G','u','r','u'), /*1.1*/ + HB_SCRIPT_HANGUL = HB_TAG ('H','a','n','g'), /*1.1*/ + HB_SCRIPT_HAN = HB_TAG ('H','a','n','i'), /*1.1*/ + HB_SCRIPT_HEBREW = HB_TAG ('H','e','b','r'), /*1.1*/ + HB_SCRIPT_HIRAGANA = HB_TAG ('H','i','r','a'), /*1.1*/ + HB_SCRIPT_KANNADA = HB_TAG ('K','n','d','a'), /*1.1*/ + HB_SCRIPT_KATAKANA = HB_TAG ('K','a','n','a'), /*1.1*/ + HB_SCRIPT_LAO = HB_TAG ('L','a','o','o'), /*1.1*/ + HB_SCRIPT_LATIN = HB_TAG ('L','a','t','n'), /*1.1*/ + HB_SCRIPT_MALAYALAM = HB_TAG ('M','l','y','m'), /*1.1*/ + HB_SCRIPT_ORIYA = HB_TAG ('O','r','y','a'), /*1.1*/ + HB_SCRIPT_TAMIL = HB_TAG ('T','a','m','l'), /*1.1*/ + HB_SCRIPT_TELUGU = HB_TAG ('T','e','l','u'), /*1.1*/ + HB_SCRIPT_THAI = HB_TAG ('T','h','a','i'), /*1.1*/ + + HB_SCRIPT_TIBETAN = HB_TAG ('T','i','b','t'), /*2.0*/ + + HB_SCRIPT_BOPOMOFO = HB_TAG ('B','o','p','o'), /*3.0*/ + HB_SCRIPT_BRAILLE = HB_TAG ('B','r','a','i'), /*3.0*/ + HB_SCRIPT_CANADIAN_SYLLABICS = HB_TAG ('C','a','n','s'), /*3.0*/ + HB_SCRIPT_CHEROKEE = HB_TAG ('C','h','e','r'), /*3.0*/ + HB_SCRIPT_ETHIOPIC = HB_TAG ('E','t','h','i'), /*3.0*/ + HB_SCRIPT_KHMER = HB_TAG ('K','h','m','r'), /*3.0*/ + HB_SCRIPT_MONGOLIAN = HB_TAG ('M','o','n','g'), /*3.0*/ + HB_SCRIPT_MYANMAR = HB_TAG ('M','y','m','r'), /*3.0*/ + HB_SCRIPT_OGHAM = HB_TAG ('O','g','a','m'), /*3.0*/ + HB_SCRIPT_RUNIC = HB_TAG ('R','u','n','r'), /*3.0*/ + HB_SCRIPT_SINHALA = HB_TAG ('S','i','n','h'), /*3.0*/ + HB_SCRIPT_SYRIAC = HB_TAG ('S','y','r','c'), /*3.0*/ + HB_SCRIPT_THAANA = HB_TAG ('T','h','a','a'), /*3.0*/ + HB_SCRIPT_YI = HB_TAG ('Y','i','i','i'), /*3.0*/ + + HB_SCRIPT_DESERET = HB_TAG ('D','s','r','t'), /*3.1*/ + HB_SCRIPT_GOTHIC = HB_TAG ('G','o','t','h'), /*3.1*/ + HB_SCRIPT_OLD_ITALIC = HB_TAG ('I','t','a','l'), /*3.1*/ + + HB_SCRIPT_BUHID = HB_TAG ('B','u','h','d'), /*3.2*/ + HB_SCRIPT_HANUNOO = HB_TAG ('H','a','n','o'), /*3.2*/ + HB_SCRIPT_TAGALOG = HB_TAG ('T','g','l','g'), /*3.2*/ + HB_SCRIPT_TAGBANWA = HB_TAG ('T','a','g','b'), /*3.2*/ + + HB_SCRIPT_CYPRIOT = HB_TAG ('C','p','r','t'), /*4.0*/ + HB_SCRIPT_LIMBU = HB_TAG ('L','i','m','b'), /*4.0*/ + HB_SCRIPT_LINEAR_B = HB_TAG ('L','i','n','b'), /*4.0*/ + HB_SCRIPT_OSMANYA = HB_TAG ('O','s','m','a'), /*4.0*/ + HB_SCRIPT_SHAVIAN = HB_TAG ('S','h','a','w'), /*4.0*/ + HB_SCRIPT_TAI_LE = HB_TAG ('T','a','l','e'), /*4.0*/ + HB_SCRIPT_UGARITIC = HB_TAG ('U','g','a','r'), /*4.0*/ + + HB_SCRIPT_BUGINESE = HB_TAG ('B','u','g','i'), /*4.1*/ + HB_SCRIPT_COPTIC = HB_TAG ('C','o','p','t'), /*4.1*/ + HB_SCRIPT_GLAGOLITIC = HB_TAG ('G','l','a','g'), /*4.1*/ + HB_SCRIPT_KHAROSHTHI = HB_TAG ('K','h','a','r'), /*4.1*/ + HB_SCRIPT_NEW_TAI_LUE = HB_TAG ('T','a','l','u'), /*4.1*/ + HB_SCRIPT_OLD_PERSIAN = HB_TAG ('X','p','e','o'), /*4.1*/ + HB_SCRIPT_SYLOTI_NAGRI = HB_TAG ('S','y','l','o'), /*4.1*/ + HB_SCRIPT_TIFINAGH = HB_TAG ('T','f','n','g'), /*4.1*/ + + HB_SCRIPT_BALINESE = HB_TAG ('B','a','l','i'), /*5.0*/ + HB_SCRIPT_CUNEIFORM = HB_TAG ('X','s','u','x'), /*5.0*/ + HB_SCRIPT_NKO = HB_TAG ('N','k','o','o'), /*5.0*/ + HB_SCRIPT_PHAGS_PA = HB_TAG ('P','h','a','g'), /*5.0*/ + HB_SCRIPT_PHOENICIAN = HB_TAG ('P','h','n','x'), /*5.0*/ + + HB_SCRIPT_CARIAN = HB_TAG ('C','a','r','i'), /*5.1*/ + HB_SCRIPT_CHAM = HB_TAG ('C','h','a','m'), /*5.1*/ + HB_SCRIPT_KAYAH_LI = HB_TAG ('K','a','l','i'), /*5.1*/ + HB_SCRIPT_LEPCHA = HB_TAG ('L','e','p','c'), /*5.1*/ + HB_SCRIPT_LYCIAN = HB_TAG ('L','y','c','i'), /*5.1*/ + HB_SCRIPT_LYDIAN = HB_TAG ('L','y','d','i'), /*5.1*/ + HB_SCRIPT_OL_CHIKI = HB_TAG ('O','l','c','k'), /*5.1*/ + HB_SCRIPT_REJANG = HB_TAG ('R','j','n','g'), /*5.1*/ + HB_SCRIPT_SAURASHTRA = HB_TAG ('S','a','u','r'), /*5.1*/ + HB_SCRIPT_SUNDANESE = HB_TAG ('S','u','n','d'), /*5.1*/ + HB_SCRIPT_VAI = HB_TAG ('V','a','i','i'), /*5.1*/ + + HB_SCRIPT_AVESTAN = HB_TAG ('A','v','s','t'), /*5.2*/ + HB_SCRIPT_BAMUM = HB_TAG ('B','a','m','u'), /*5.2*/ + HB_SCRIPT_EGYPTIAN_HIEROGLYPHS = HB_TAG ('E','g','y','p'), /*5.2*/ + HB_SCRIPT_IMPERIAL_ARAMAIC = HB_TAG ('A','r','m','i'), /*5.2*/ + HB_SCRIPT_INSCRIPTIONAL_PAHLAVI = HB_TAG ('P','h','l','i'), /*5.2*/ + HB_SCRIPT_INSCRIPTIONAL_PARTHIAN = HB_TAG ('P','r','t','i'), /*5.2*/ + HB_SCRIPT_JAVANESE = HB_TAG ('J','a','v','a'), /*5.2*/ + HB_SCRIPT_KAITHI = HB_TAG ('K','t','h','i'), /*5.2*/ + HB_SCRIPT_LISU = HB_TAG ('L','i','s','u'), /*5.2*/ + HB_SCRIPT_MEETEI_MAYEK = HB_TAG ('M','t','e','i'), /*5.2*/ + HB_SCRIPT_OLD_SOUTH_ARABIAN = HB_TAG ('S','a','r','b'), /*5.2*/ + HB_SCRIPT_OLD_TURKIC = HB_TAG ('O','r','k','h'), /*5.2*/ + HB_SCRIPT_SAMARITAN = HB_TAG ('S','a','m','r'), /*5.2*/ + HB_SCRIPT_TAI_THAM = HB_TAG ('L','a','n','a'), /*5.2*/ + HB_SCRIPT_TAI_VIET = HB_TAG ('T','a','v','t'), /*5.2*/ + + HB_SCRIPT_BATAK = HB_TAG ('B','a','t','k'), /*6.0*/ + HB_SCRIPT_BRAHMI = HB_TAG ('B','r','a','h'), /*6.0*/ + HB_SCRIPT_MANDAIC = HB_TAG ('M','a','n','d'), /*6.0*/ + + HB_SCRIPT_CHAKMA = HB_TAG ('C','a','k','m'), /*6.1*/ + HB_SCRIPT_MEROITIC_CURSIVE = HB_TAG ('M','e','r','c'), /*6.1*/ + HB_SCRIPT_MEROITIC_HIEROGLYPHS = HB_TAG ('M','e','r','o'), /*6.1*/ + HB_SCRIPT_MIAO = HB_TAG ('P','l','r','d'), /*6.1*/ + HB_SCRIPT_SHARADA = HB_TAG ('S','h','r','d'), /*6.1*/ + HB_SCRIPT_SORA_SOMPENG = HB_TAG ('S','o','r','a'), /*6.1*/ + HB_SCRIPT_TAKRI = HB_TAG ('T','a','k','r'), /*6.1*/ + + /* + * Since: 0.9.30 + */ + HB_SCRIPT_BASSA_VAH = HB_TAG ('B','a','s','s'), /*7.0*/ + HB_SCRIPT_CAUCASIAN_ALBANIAN = HB_TAG ('A','g','h','b'), /*7.0*/ + HB_SCRIPT_DUPLOYAN = HB_TAG ('D','u','p','l'), /*7.0*/ + HB_SCRIPT_ELBASAN = HB_TAG ('E','l','b','a'), /*7.0*/ + HB_SCRIPT_GRANTHA = HB_TAG ('G','r','a','n'), /*7.0*/ + HB_SCRIPT_KHOJKI = HB_TAG ('K','h','o','j'), /*7.0*/ + HB_SCRIPT_KHUDAWADI = HB_TAG ('S','i','n','d'), /*7.0*/ + HB_SCRIPT_LINEAR_A = HB_TAG ('L','i','n','a'), /*7.0*/ + HB_SCRIPT_MAHAJANI = HB_TAG ('M','a','h','j'), /*7.0*/ + HB_SCRIPT_MANICHAEAN = HB_TAG ('M','a','n','i'), /*7.0*/ + HB_SCRIPT_MENDE_KIKAKUI = HB_TAG ('M','e','n','d'), /*7.0*/ + HB_SCRIPT_MODI = HB_TAG ('M','o','d','i'), /*7.0*/ + HB_SCRIPT_MRO = HB_TAG ('M','r','o','o'), /*7.0*/ + HB_SCRIPT_NABATAEAN = HB_TAG ('N','b','a','t'), /*7.0*/ + HB_SCRIPT_OLD_NORTH_ARABIAN = HB_TAG ('N','a','r','b'), /*7.0*/ + HB_SCRIPT_OLD_PERMIC = HB_TAG ('P','e','r','m'), /*7.0*/ + HB_SCRIPT_PAHAWH_HMONG = HB_TAG ('H','m','n','g'), /*7.0*/ + HB_SCRIPT_PALMYRENE = HB_TAG ('P','a','l','m'), /*7.0*/ + HB_SCRIPT_PAU_CIN_HAU = HB_TAG ('P','a','u','c'), /*7.0*/ + HB_SCRIPT_PSALTER_PAHLAVI = HB_TAG ('P','h','l','p'), /*7.0*/ + HB_SCRIPT_SIDDHAM = HB_TAG ('S','i','d','d'), /*7.0*/ + HB_SCRIPT_TIRHUTA = HB_TAG ('T','i','r','h'), /*7.0*/ + HB_SCRIPT_WARANG_CITI = HB_TAG ('W','a','r','a'), /*7.0*/ + + HB_SCRIPT_AHOM = HB_TAG ('A','h','o','m'), /*8.0*/ + HB_SCRIPT_ANATOLIAN_HIEROGLYPHS = HB_TAG ('H','l','u','w'), /*8.0*/ + HB_SCRIPT_HATRAN = HB_TAG ('H','a','t','r'), /*8.0*/ + HB_SCRIPT_MULTANI = HB_TAG ('M','u','l','t'), /*8.0*/ + HB_SCRIPT_OLD_HUNGARIAN = HB_TAG ('H','u','n','g'), /*8.0*/ + HB_SCRIPT_SIGNWRITING = HB_TAG ('S','g','n','w'), /*8.0*/ + + /* + * Since 1.3.0 + */ + HB_SCRIPT_ADLAM = HB_TAG ('A','d','l','m'), /*9.0*/ + HB_SCRIPT_BHAIKSUKI = HB_TAG ('B','h','k','s'), /*9.0*/ + HB_SCRIPT_MARCHEN = HB_TAG ('M','a','r','c'), /*9.0*/ + HB_SCRIPT_OSAGE = HB_TAG ('O','s','g','e'), /*9.0*/ + HB_SCRIPT_TANGUT = HB_TAG ('T','a','n','g'), /*9.0*/ + HB_SCRIPT_NEWA = HB_TAG ('N','e','w','a'), /*9.0*/ + + /* + * Since 1.6.0 + */ + HB_SCRIPT_MASARAM_GONDI = HB_TAG ('G','o','n','m'), /*10.0*/ + HB_SCRIPT_NUSHU = HB_TAG ('N','s','h','u'), /*10.0*/ + HB_SCRIPT_SOYOMBO = HB_TAG ('S','o','y','o'), /*10.0*/ + HB_SCRIPT_ZANABAZAR_SQUARE = HB_TAG ('Z','a','n','b'), /*10.0*/ + + /* + * Since 1.8.0 + */ + HB_SCRIPT_DOGRA = HB_TAG ('D','o','g','r'), /*11.0*/ + HB_SCRIPT_GUNJALA_GONDI = HB_TAG ('G','o','n','g'), /*11.0*/ + HB_SCRIPT_HANIFI_ROHINGYA = HB_TAG ('R','o','h','g'), /*11.0*/ + HB_SCRIPT_MAKASAR = HB_TAG ('M','a','k','a'), /*11.0*/ + HB_SCRIPT_MEDEFAIDRIN = HB_TAG ('M','e','d','f'), /*11.0*/ + HB_SCRIPT_OLD_SOGDIAN = HB_TAG ('S','o','g','o'), /*11.0*/ + HB_SCRIPT_SOGDIAN = HB_TAG ('S','o','g','d'), /*11.0*/ + + /* + * Since 2.4.0 + */ + HB_SCRIPT_ELYMAIC = HB_TAG ('E','l','y','m'), /*12.0*/ + HB_SCRIPT_NANDINAGARI = HB_TAG ('N','a','n','d'), /*12.0*/ + HB_SCRIPT_NYIAKENG_PUACHUE_HMONG = HB_TAG ('H','m','n','p'), /*12.0*/ + HB_SCRIPT_WANCHO = HB_TAG ('W','c','h','o'), /*12.0*/ + + /* + * Since 2.6.7 + */ + HB_SCRIPT_CHORASMIAN = HB_TAG ('C','h','r','s'), /*13.0*/ + HB_SCRIPT_DIVES_AKURU = HB_TAG ('D','i','a','k'), /*13.0*/ + HB_SCRIPT_KHITAN_SMALL_SCRIPT = HB_TAG ('K','i','t','s'), /*13.0*/ + HB_SCRIPT_YEZIDI = HB_TAG ('Y','e','z','i'), /*13.0*/ + + /* + * Since 3.0.0 + */ + HB_SCRIPT_CYPRO_MINOAN = HB_TAG ('C','p','m','n'), /*14.0*/ + HB_SCRIPT_OLD_UYGHUR = HB_TAG ('O','u','g','r'), /*14.0*/ + HB_SCRIPT_TANGSA = HB_TAG ('T','n','s','a'), /*14.0*/ + HB_SCRIPT_TOTO = HB_TAG ('T','o','t','o'), /*14.0*/ + HB_SCRIPT_VITHKUQI = HB_TAG ('V','i','t','h'), /*14.0*/ + + /* + * Since 3.4.0 + */ + HB_SCRIPT_MATH = HB_TAG ('Z','m','t','h'), + + /* + * Since 5.2.0 + */ + HB_SCRIPT_KAWI = HB_TAG ('K','a','w','i'), /*15.0*/ + HB_SCRIPT_NAG_MUNDARI = HB_TAG ('N','a','g','m'), /*15.0*/ + + /* + * Since 10.0.0 + */ + HB_SCRIPT_GARAY = HB_TAG ('G','a','r','a'), /*16.0*/ + HB_SCRIPT_GURUNG_KHEMA = HB_TAG ('G','u','k','h'), /*16.0*/ + HB_SCRIPT_KIRAT_RAI = HB_TAG ('K','r','a','i'), /*16.0*/ + HB_SCRIPT_OL_ONAL = HB_TAG ('O','n','a','o'), /*16.0*/ + HB_SCRIPT_SUNUWAR = HB_TAG ('S','u','n','u'), /*16.0*/ + HB_SCRIPT_TODHRI = HB_TAG ('T','o','d','r'), /*16.0*/ + HB_SCRIPT_TULU_TIGALARI = HB_TAG ('T','u','t','g'), /*16.0*/ + + /* No script set. */ + HB_SCRIPT_INVALID = HB_TAG_NONE, + + /*< private >*/ + + /* Dummy values to ensure any hb_tag_t value can be passed/stored as hb_script_t + * without risking undefined behavior. We have two, for historical reasons. + * HB_TAG_MAX used to be unsigned, but that was invalid Ansi C, so was changed + * to _HB_SCRIPT_MAX_VALUE to be equal to HB_TAG_MAX_SIGNED as well. + * + * See this thread for technicalities: + * + * https://lists.freedesktop.org/archives/harfbuzz/2014-March/004150.html + */ + _HB_SCRIPT_MAX_VALUE = HB_TAG_MAX_SIGNED, /*< skip >*/ + _HB_SCRIPT_MAX_VALUE_SIGNED = HB_TAG_MAX_SIGNED /*< skip >*/ + +} hb_script_t; + + +#endif /* HB_SCRIPT_LIST_H */ diff --git a/dependencies/linux64/include/harfbuzz/hb-set.h b/dependencies/linux64/include/harfbuzz/hb-set.h new file mode 100644 index 0000000..192abf6 --- /dev/null +++ b/dependencies/linux64/include/harfbuzz/hb-set.h @@ -0,0 +1,203 @@ +/* + * Copyright © 2012 Google, Inc. + * + * This is part of HarfBuzz, a text shaping library. + * + * Permission is hereby granted, without written agreement and without + * license or royalty fees, to use, copy, modify, and distribute this + * software and its documentation for any purpose, provided that the + * above copyright notice and the following two paragraphs appear in + * all copies of this software. + * + * IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE TO ANY PARTY FOR + * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES + * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN + * IF THE COPYRIGHT HOLDER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + * THE COPYRIGHT HOLDER SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, + * BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND + * FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS + * ON AN "AS IS" BASIS, AND THE COPYRIGHT HOLDER HAS NO OBLIGATION TO + * PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. + * + * Google Author(s): Behdad Esfahbod + */ + +#if !defined(HB_H_IN) && !defined(HB_NO_SINGLE_HEADER_ERROR) +#error "Include instead." +#endif + +#ifndef HB_SET_H +#define HB_SET_H + +#include "hb-common.h" + +HB_BEGIN_DECLS + + +/** + * HB_SET_VALUE_INVALID: + * + * Unset #hb_set_t value. + * + * Since: 0.9.21 + */ +#define HB_SET_VALUE_INVALID HB_CODEPOINT_INVALID + +/** + * hb_set_t: + * + * Data type for holding a set of integers. #hb_set_t's are + * used to gather and contain glyph IDs, Unicode code + * points, and various other collections of discrete + * values. + * + **/ +typedef struct hb_set_t hb_set_t; + + +HB_EXTERN hb_set_t * +hb_set_create (void); + +HB_EXTERN hb_set_t * +hb_set_get_empty (void); + +HB_EXTERN hb_set_t * +hb_set_reference (hb_set_t *set); + +HB_EXTERN void +hb_set_destroy (hb_set_t *set); + +HB_EXTERN hb_bool_t +hb_set_set_user_data (hb_set_t *set, + hb_user_data_key_t *key, + void * data, + hb_destroy_func_t destroy, + hb_bool_t replace); + +HB_EXTERN void * +hb_set_get_user_data (const hb_set_t *set, + hb_user_data_key_t *key); + + +/* Returns false if allocation has failed before */ +HB_EXTERN hb_bool_t +hb_set_allocation_successful (const hb_set_t *set); + +HB_EXTERN hb_set_t * +hb_set_copy (const hb_set_t *set); + +HB_EXTERN void +hb_set_clear (hb_set_t *set); + +HB_EXTERN hb_bool_t +hb_set_is_empty (const hb_set_t *set); + +HB_EXTERN void +hb_set_invert (hb_set_t *set); + +HB_EXTERN hb_bool_t +hb_set_is_inverted (const hb_set_t *set); + +HB_EXTERN hb_bool_t +hb_set_has (const hb_set_t *set, + hb_codepoint_t codepoint); + +HB_EXTERN void +hb_set_add (hb_set_t *set, + hb_codepoint_t codepoint); + +HB_EXTERN void +hb_set_add_range (hb_set_t *set, + hb_codepoint_t first, + hb_codepoint_t last); + +HB_EXTERN void +hb_set_add_sorted_array (hb_set_t *set, + const hb_codepoint_t *sorted_codepoints, + unsigned int num_codepoints); + +HB_EXTERN void +hb_set_del (hb_set_t *set, + hb_codepoint_t codepoint); + +HB_EXTERN void +hb_set_del_range (hb_set_t *set, + hb_codepoint_t first, + hb_codepoint_t last); + +HB_EXTERN hb_bool_t +hb_set_is_equal (const hb_set_t *set, + const hb_set_t *other); + +HB_EXTERN unsigned int +hb_set_hash (const hb_set_t *set); + +HB_EXTERN hb_bool_t +hb_set_is_subset (const hb_set_t *set, + const hb_set_t *larger_set); + +HB_EXTERN void +hb_set_set (hb_set_t *set, + const hb_set_t *other); + +HB_EXTERN void +hb_set_union (hb_set_t *set, + const hb_set_t *other); + +HB_EXTERN void +hb_set_intersect (hb_set_t *set, + const hb_set_t *other); + +HB_EXTERN void +hb_set_subtract (hb_set_t *set, + const hb_set_t *other); + +HB_EXTERN void +hb_set_symmetric_difference (hb_set_t *set, + const hb_set_t *other); + +HB_EXTERN unsigned int +hb_set_get_population (const hb_set_t *set); + +/* Returns HB_SET_VALUE_INVALID if set empty. */ +HB_EXTERN hb_codepoint_t +hb_set_get_min (const hb_set_t *set); + +/* Returns HB_SET_VALUE_INVALID if set empty. */ +HB_EXTERN hb_codepoint_t +hb_set_get_max (const hb_set_t *set); + +/* Pass HB_SET_VALUE_INVALID in to get started. */ +HB_EXTERN hb_bool_t +hb_set_next (const hb_set_t *set, + hb_codepoint_t *codepoint); + +/* Pass HB_SET_VALUE_INVALID in to get started. */ +HB_EXTERN hb_bool_t +hb_set_previous (const hb_set_t *set, + hb_codepoint_t *codepoint); + +/* Pass HB_SET_VALUE_INVALID for first and last to get started. */ +HB_EXTERN hb_bool_t +hb_set_next_range (const hb_set_t *set, + hb_codepoint_t *first, + hb_codepoint_t *last); + +/* Pass HB_SET_VALUE_INVALID for first and last to get started. */ +HB_EXTERN hb_bool_t +hb_set_previous_range (const hb_set_t *set, + hb_codepoint_t *first, + hb_codepoint_t *last); + +/* Pass HB_SET_VALUE_INVALID in to get started. */ +HB_EXTERN unsigned int +hb_set_next_many (const hb_set_t *set, + hb_codepoint_t codepoint, + hb_codepoint_t *out, + unsigned int size); + +HB_END_DECLS + +#endif /* HB_SET_H */ diff --git a/dependencies/linux64/include/harfbuzz/hb-shape-plan.h b/dependencies/linux64/include/harfbuzz/hb-shape-plan.h new file mode 100644 index 0000000..aaf5cf9 --- /dev/null +++ b/dependencies/linux64/include/harfbuzz/hb-shape-plan.h @@ -0,0 +1,122 @@ +/* + * Copyright © 2012 Google, Inc. + * + * This is part of HarfBuzz, a text shaping library. + * + * Permission is hereby granted, without written agreement and without + * license or royalty fees, to use, copy, modify, and distribute this + * software and its documentation for any purpose, provided that the + * above copyright notice and the following two paragraphs appear in + * all copies of this software. + * + * IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE TO ANY PARTY FOR + * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES + * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN + * IF THE COPYRIGHT HOLDER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + * THE COPYRIGHT HOLDER SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, + * BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND + * FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS + * ON AN "AS IS" BASIS, AND THE COPYRIGHT HOLDER HAS NO OBLIGATION TO + * PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. + * + * Google Author(s): Behdad Esfahbod + */ + +#if !defined(HB_H_IN) && !defined(HB_NO_SINGLE_HEADER_ERROR) +#error "Include instead." +#endif + +#ifndef HB_SHAPE_PLAN_H +#define HB_SHAPE_PLAN_H + +#include "hb-common.h" +#include "hb-font.h" + +HB_BEGIN_DECLS + +/** + * hb_shape_plan_t: + * + * Data type for holding a shaping plan. + * + * Shape plans contain information about how HarfBuzz will shape a + * particular text segment, based on the segment's properties and the + * capabilities in the font face in use. + * + * Shape plans can be queried about how shaping will perform, given a set + * of specific input parameters (script, language, direction, features, + * etc.). + * + **/ +typedef struct hb_shape_plan_t hb_shape_plan_t; + +HB_EXTERN hb_shape_plan_t * +hb_shape_plan_create (hb_face_t *face, + const hb_segment_properties_t *props, + const hb_feature_t *user_features, + unsigned int num_user_features, + const char * const *shaper_list); + +HB_EXTERN hb_shape_plan_t * +hb_shape_plan_create_cached (hb_face_t *face, + const hb_segment_properties_t *props, + const hb_feature_t *user_features, + unsigned int num_user_features, + const char * const *shaper_list); + +HB_EXTERN hb_shape_plan_t * +hb_shape_plan_create2 (hb_face_t *face, + const hb_segment_properties_t *props, + const hb_feature_t *user_features, + unsigned int num_user_features, + const int *coords, + unsigned int num_coords, + const char * const *shaper_list); + +HB_EXTERN hb_shape_plan_t * +hb_shape_plan_create_cached2 (hb_face_t *face, + const hb_segment_properties_t *props, + const hb_feature_t *user_features, + unsigned int num_user_features, + const int *coords, + unsigned int num_coords, + const char * const *shaper_list); + + +HB_EXTERN hb_shape_plan_t * +hb_shape_plan_get_empty (void); + +HB_EXTERN hb_shape_plan_t * +hb_shape_plan_reference (hb_shape_plan_t *shape_plan); + +HB_EXTERN void +hb_shape_plan_destroy (hb_shape_plan_t *shape_plan); + +HB_EXTERN hb_bool_t +hb_shape_plan_set_user_data (hb_shape_plan_t *shape_plan, + hb_user_data_key_t *key, + void * data, + hb_destroy_func_t destroy, + hb_bool_t replace); + +HB_EXTERN void * +hb_shape_plan_get_user_data (const hb_shape_plan_t *shape_plan, + hb_user_data_key_t *key); + + +HB_EXTERN hb_bool_t +hb_shape_plan_execute (hb_shape_plan_t *shape_plan, + hb_font_t *font, + hb_buffer_t *buffer, + const hb_feature_t *features, + unsigned int num_features); + +HB_EXTERN const char * +hb_shape_plan_get_shaper (hb_shape_plan_t *shape_plan); + + +HB_END_DECLS + +#endif /* HB_SHAPE_PLAN_H */ diff --git a/dependencies/linux64/include/harfbuzz/hb-shape.h b/dependencies/linux64/include/harfbuzz/hb-shape.h new file mode 100644 index 0000000..b09bf05 --- /dev/null +++ b/dependencies/linux64/include/harfbuzz/hb-shape.h @@ -0,0 +1,76 @@ +/* + * Copyright © 2009 Red Hat, Inc. + * Copyright © 2012 Google, Inc. + * + * This is part of HarfBuzz, a text shaping library. + * + * Permission is hereby granted, without written agreement and without + * license or royalty fees, to use, copy, modify, and distribute this + * software and its documentation for any purpose, provided that the + * above copyright notice and the following two paragraphs appear in + * all copies of this software. + * + * IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE TO ANY PARTY FOR + * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES + * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN + * IF THE COPYRIGHT HOLDER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + * THE COPYRIGHT HOLDER SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, + * BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND + * FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS + * ON AN "AS IS" BASIS, AND THE COPYRIGHT HOLDER HAS NO OBLIGATION TO + * PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. + * + * Red Hat Author(s): Behdad Esfahbod + * Google Author(s): Behdad Esfahbod + */ + +#if !defined(HB_H_IN) && !defined(HB_NO_SINGLE_HEADER_ERROR) +#error "Include instead." +#endif + +#ifndef HB_SHAPE_H +#define HB_SHAPE_H + +#include "hb-common.h" +#include "hb-buffer.h" +#include "hb-font.h" + +HB_BEGIN_DECLS + + +HB_EXTERN void +hb_shape (hb_font_t *font, + hb_buffer_t *buffer, + const hb_feature_t *features, + unsigned int num_features); + +HB_EXTERN hb_bool_t +hb_shape_full (hb_font_t *font, + hb_buffer_t *buffer, + const hb_feature_t *features, + unsigned int num_features, + const char * const *shaper_list); + +#ifdef HB_EXPERIMENTAL_API +HB_EXTERN hb_bool_t +hb_shape_justify (hb_font_t *font, + hb_buffer_t *buffer, + const hb_feature_t *features, + unsigned int num_features, + const char * const *shaper_list, + float min_target_advance, + float max_target_advance, + float *advance, /* IN/OUT */ + hb_tag_t *var_tag, /* OUT */ + float *var_value /* OUT */); +#endif + +HB_EXTERN const char ** +hb_shape_list_shapers (void); + + +HB_END_DECLS + +#endif /* HB_SHAPE_H */ diff --git a/dependencies/linux64/include/harfbuzz/hb-style.h b/dependencies/linux64/include/harfbuzz/hb-style.h new file mode 100644 index 0000000..d17d2da --- /dev/null +++ b/dependencies/linux64/include/harfbuzz/hb-style.h @@ -0,0 +1,81 @@ +/* + * Copyright © 2019 Ebrahim Byagowi + * + * This is part of HarfBuzz, a text shaping library. + * + * Permission is hereby granted, without written agreement and without + * license or royalty fees, to use, copy, modify, and distribute this + * software and its documentation for any purpose, provided that the + * above copyright notice and the following two paragraphs appear in + * all copies of this software. + * + * IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE TO ANY PARTY FOR + * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES + * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN + * IF THE COPYRIGHT HOLDER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + * THE COPYRIGHT HOLDER SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, + * BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND + * FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS + * ON AN "AS IS" BASIS, AND THE COPYRIGHT HOLDER HAS NO OBLIGATION TO + * PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. + */ + +#if !defined(HB_H_IN) && !defined(HB_NO_SINGLE_HEADER_ERROR) +#error "Include instead." +#endif + +#ifndef HB_STYLE_H +#define HB_STYLE_H + +#include "hb.h" + +HB_BEGIN_DECLS + +/** + * hb_style_tag_t: + * @HB_STYLE_TAG_ITALIC: Used to vary between non-italic and italic. + * A value of 0 can be interpreted as "Roman" (non-italic); a value of 1 can + * be interpreted as (fully) italic. + * @HB_STYLE_TAG_OPTICAL_SIZE: Used to vary design to suit different text sizes. + * Non-zero. Values can be interpreted as text size, in points. + * @HB_STYLE_TAG_SLANT_ANGLE: Used to vary between upright and slanted text. Values + * must be greater than -90 and less than +90. Values can be interpreted as + * the angle, in counter-clockwise degrees, of oblique slant from whatever the + * designer considers to be upright for that font design. Typical right-leaning + * Italic fonts have a negative slant angle (typically around -12) + * @HB_STYLE_TAG_SLANT_RATIO: same as @HB_STYLE_TAG_SLANT_ANGLE expression as ratio. + * Typical right-leaning Italic fonts have a positive slant ratio (typically around 0.2) + * @HB_STYLE_TAG_WIDTH: Used to vary width of text from narrower to wider. + * Non-zero. Values can be interpreted as a percentage of whatever the font + * designer considers “normal width” for that font design. + * @HB_STYLE_TAG_WEIGHT: Used to vary stroke thicknesses or other design details + * to give variation from lighter to blacker. Values can be interpreted in direct + * comparison to values for usWeightClass in the OS/2 table, + * or the CSS font-weight property. + * + * Defined by [OpenType Design-Variation Axis Tag Registry](https://docs.microsoft.com/en-us/typography/opentype/spec/dvaraxisreg). + * + * Since: 3.0.0 + **/ +typedef enum +{ + HB_STYLE_TAG_ITALIC = HB_TAG ('i','t','a','l'), + HB_STYLE_TAG_OPTICAL_SIZE = HB_TAG ('o','p','s','z'), + HB_STYLE_TAG_SLANT_ANGLE = HB_TAG ('s','l','n','t'), + HB_STYLE_TAG_SLANT_RATIO = HB_TAG ('S','l','n','t'), + HB_STYLE_TAG_WIDTH = HB_TAG ('w','d','t','h'), + HB_STYLE_TAG_WEIGHT = HB_TAG ('w','g','h','t'), + + /*< private >*/ + _HB_STYLE_TAG_MAX_VALUE = HB_TAG_MAX_SIGNED /*< skip >*/ +} hb_style_tag_t; + + +HB_EXTERN float +hb_style_get_value (hb_font_t *font, hb_style_tag_t style_tag); + +HB_END_DECLS + +#endif /* HB_STYLE_H */ diff --git a/dependencies/linux64/include/harfbuzz/hb-subset-serialize.h b/dependencies/linux64/include/harfbuzz/hb-subset-serialize.h new file mode 100644 index 0000000..9035d4c --- /dev/null +++ b/dependencies/linux64/include/harfbuzz/hb-subset-serialize.h @@ -0,0 +1,83 @@ +/* + * Copyright © 2022 Google, Inc. + * + * This is part of HarfBuzz, a text shaping library. + * + * Permission is hereby granted, without written agreement and without + * license or royalty fees, to use, copy, modify, and distribute this + * software and its documentation for any purpose, provided that the + * above copyright notice and the following two paragraphs appear in + * all copies of this software. + * + * IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE TO ANY PARTY FOR + * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES + * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN + * IF THE COPYRIGHT HOLDER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + * THE COPYRIGHT HOLDER SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, + * BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND + * FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS + * ON AN "AS IS" BASIS, AND THE COPYRIGHT HOLDER HAS NO OBLIGATION TO + * PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. + * + */ + +#ifndef HB_SUBSET_SERIALIZE_H +#define HB_SUBSET_SERIALIZE_H + +#include "hb.h" + +HB_BEGIN_DECLS + +/** + * hb_subset_serialize_link_t: + * @width: offsetSize in bytes + * @position: position of the offset field in bytes from + * beginning of subtable + * @objidx: index of subtable + * + * Represents a link between two objects in the object graph + * to be serialized. + * + * Since: 10.2.0 + */ +typedef struct hb_subset_serialize_link_t { + unsigned int width; + unsigned int position; + unsigned int objidx; +} hb_subset_serialize_link_t; + +/** + * hb_subset_serialize_object_t: + * @head: start of object data + * @tail: end of object data + * @num_real_links: number of offset field in the object + * @real_links: array of offset info + * @num_virtual_links: number of objects that must be packed + * after current object in the final + * serialized order + * @virtual_links: array of virtual link info + * + * Represents an object in the object graph to be serialized. + * + * Since: 10.2.0 + */ +typedef struct hb_subset_serialize_object_t { + char *head; + char *tail; + unsigned int num_real_links; + hb_subset_serialize_link_t *real_links; + unsigned int num_virtual_links; + hb_subset_serialize_link_t *virtual_links; +} hb_subset_serialize_object_t; + +HB_EXTERN hb_blob_t * +hb_subset_serialize_or_fail (hb_tag_t table_tag, + hb_subset_serialize_object_t *hb_objects, + unsigned num_hb_objs); + + +HB_END_DECLS + +#endif /* HB_SUBSET_SERIALIZE_H */ diff --git a/dependencies/linux64/include/harfbuzz/hb-subset.h b/dependencies/linux64/include/harfbuzz/hb-subset.h new file mode 100644 index 0000000..374035d --- /dev/null +++ b/dependencies/linux64/include/harfbuzz/hb-subset.h @@ -0,0 +1,292 @@ +/* + * Copyright © 2018 Google, Inc. + * + * This is part of HarfBuzz, a text shaping library. + * + * Permission is hereby granted, without written agreement and without + * license or royalty fees, to use, copy, modify, and distribute this + * software and its documentation for any purpose, provided that the + * above copyright notice and the following two paragraphs appear in + * all copies of this software. + * + * IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE TO ANY PARTY FOR + * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES + * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN + * IF THE COPYRIGHT HOLDER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + * THE COPYRIGHT HOLDER SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, + * BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND + * FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS + * ON AN "AS IS" BASIS, AND THE COPYRIGHT HOLDER HAS NO OBLIGATION TO + * PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. + * + * Google Author(s): Rod Sheeter + */ + +#ifndef HB_SUBSET_H +#define HB_SUBSET_H + +#include "hb.h" +#include "hb-ot.h" + +HB_BEGIN_DECLS + +/** + * hb_subset_input_t: + * + * Things that change based on the input. Characters to keep, etc. + */ + +typedef struct hb_subset_input_t hb_subset_input_t; + +/** + * hb_subset_plan_t: + * + * Contains information about how the subset operation will be executed. + * Such as mappings from the old glyph ids to the new ones in the subset. + */ + +typedef struct hb_subset_plan_t hb_subset_plan_t; + +/** + * hb_subset_flags_t: + * @HB_SUBSET_FLAGS_DEFAULT: all flags at their default value of false. + * @HB_SUBSET_FLAGS_NO_HINTING: If set hinting instructions will be dropped in + * the produced subset. Otherwise hinting instructions will be retained. + * @HB_SUBSET_FLAGS_RETAIN_GIDS: If set glyph indices will not be modified in + * the produced subset. If glyphs are dropped their indices will be retained + * as an empty glyph. + * @HB_SUBSET_FLAGS_DESUBROUTINIZE: If set and subsetting a CFF font the + * subsetter will attempt to remove subroutines from the CFF glyphs. + * @HB_SUBSET_FLAGS_NAME_LEGACY: If set non-unicode name records will be + * retained in the subset. + * @HB_SUBSET_FLAGS_SET_OVERLAPS_FLAG: If set the subsetter will set the + * OVERLAP_SIMPLE flag on each simple glyph. + * @HB_SUBSET_FLAGS_PASSTHROUGH_UNRECOGNIZED: If set the subsetter will not + * drop unrecognized tables and instead pass them through untouched. + * @HB_SUBSET_FLAGS_NOTDEF_OUTLINE: If set the notdef glyph outline will be + * retained in the final subset. + * @HB_SUBSET_FLAGS_GLYPH_NAMES: If set the PS glyph names will be retained + * in the final subset. + * @HB_SUBSET_FLAGS_NO_PRUNE_UNICODE_RANGES: If set then the unicode ranges in + * OS/2 will not be recalculated. + * @HB_SUBSET_FLAGS_NO_LAYOUT_CLOSURE: If set do not perform glyph closure on layout + * substitution rules (GSUB). Since: 7.2.0. + * @HB_SUBSET_FLAGS_OPTIMIZE_IUP_DELTAS: If set perform IUP delta optimization on the + * remaining gvar table's deltas. Since: 8.5.0 + * @HB_SUBSET_FLAGS_NO_BIDI_CLOSURE: If set do not pull mirrored versions of input + * codepoints into the subset. Since: 11.1.0 + * @HB_SUBSET_FLAGS_IFTB_REQUIREMENTS: If set enforce requirements on the output subset + * to allow it to be used with incremental font transfer IFTB patches. Primarily, + * this forces all outline data to use long (32 bit) offsets. Since: EXPERIMENTAL + * + * List of boolean properties that can be configured on the subset input. + * + * Since: 2.9.0 + **/ +typedef enum { /*< flags >*/ + HB_SUBSET_FLAGS_DEFAULT = 0x00000000u, + HB_SUBSET_FLAGS_NO_HINTING = 0x00000001u, + HB_SUBSET_FLAGS_RETAIN_GIDS = 0x00000002u, + HB_SUBSET_FLAGS_DESUBROUTINIZE = 0x00000004u, + HB_SUBSET_FLAGS_NAME_LEGACY = 0x00000008u, + HB_SUBSET_FLAGS_SET_OVERLAPS_FLAG = 0x00000010u, + HB_SUBSET_FLAGS_PASSTHROUGH_UNRECOGNIZED = 0x00000020u, + HB_SUBSET_FLAGS_NOTDEF_OUTLINE = 0x00000040u, + HB_SUBSET_FLAGS_GLYPH_NAMES = 0x00000080u, + HB_SUBSET_FLAGS_NO_PRUNE_UNICODE_RANGES = 0x00000100u, + HB_SUBSET_FLAGS_NO_LAYOUT_CLOSURE = 0x00000200u, + HB_SUBSET_FLAGS_OPTIMIZE_IUP_DELTAS = 0x00000400u, + HB_SUBSET_FLAGS_NO_BIDI_CLOSURE = 0x00000800u, +#ifdef HB_EXPERIMENTAL_API + HB_SUBSET_FLAGS_IFTB_REQUIREMENTS = 0x00001000u, +#endif +} hb_subset_flags_t; + +/** + * hb_subset_sets_t: + * @HB_SUBSET_SETS_GLYPH_INDEX: the set of glyph indexes to retain in the subset. + * @HB_SUBSET_SETS_UNICODE: the set of unicode codepoints to retain in the subset. + * @HB_SUBSET_SETS_NO_SUBSET_TABLE_TAG: the set of table tags which specifies tables that should not be + * subsetted. + * @HB_SUBSET_SETS_DROP_TABLE_TAG: the set of table tags which specifies tables which will be dropped + * in the subset. + * @HB_SUBSET_SETS_NAME_ID: the set of name ids that will be retained. + * @HB_SUBSET_SETS_NAME_LANG_ID: the set of name lang ids that will be retained. + * @HB_SUBSET_SETS_LAYOUT_FEATURE_TAG: the set of layout feature tags that will be retained + * in the subset. + * @HB_SUBSET_SETS_LAYOUT_SCRIPT_TAG: the set of layout script tags that will be retained + * in the subset. Defaults to all tags. Since: 5.0.0 + * + * List of sets that can be configured on the subset input. + * + * Since: 2.9.1 + **/ +typedef enum { + HB_SUBSET_SETS_GLYPH_INDEX = 0, + HB_SUBSET_SETS_UNICODE, + HB_SUBSET_SETS_NO_SUBSET_TABLE_TAG, + HB_SUBSET_SETS_DROP_TABLE_TAG, + HB_SUBSET_SETS_NAME_ID, + HB_SUBSET_SETS_NAME_LANG_ID, + HB_SUBSET_SETS_LAYOUT_FEATURE_TAG, + HB_SUBSET_SETS_LAYOUT_SCRIPT_TAG, +} hb_subset_sets_t; + +HB_EXTERN hb_subset_input_t * +hb_subset_input_create_or_fail (void); + +HB_EXTERN hb_subset_input_t * +hb_subset_input_reference (hb_subset_input_t *input); + +HB_EXTERN void +hb_subset_input_destroy (hb_subset_input_t *input); + +HB_EXTERN hb_bool_t +hb_subset_input_set_user_data (hb_subset_input_t *input, + hb_user_data_key_t *key, + void * data, + hb_destroy_func_t destroy, + hb_bool_t replace); + +HB_EXTERN void * +hb_subset_input_get_user_data (const hb_subset_input_t *input, + hb_user_data_key_t *key); + +HB_EXTERN void +hb_subset_input_keep_everything (hb_subset_input_t *input); + +HB_EXTERN hb_set_t * +hb_subset_input_unicode_set (hb_subset_input_t *input); + +HB_EXTERN hb_set_t * +hb_subset_input_glyph_set (hb_subset_input_t *input); + +HB_EXTERN hb_set_t * +hb_subset_input_set (hb_subset_input_t *input, hb_subset_sets_t set_type); + +HB_EXTERN hb_map_t* +hb_subset_input_old_to_new_glyph_mapping (hb_subset_input_t *input); + +HB_EXTERN hb_subset_flags_t +hb_subset_input_get_flags (hb_subset_input_t *input); + +HB_EXTERN void +hb_subset_input_set_flags (hb_subset_input_t *input, + unsigned value); + +HB_EXTERN hb_bool_t +hb_subset_input_pin_all_axes_to_default (hb_subset_input_t *input, + hb_face_t *face); + +HB_EXTERN hb_bool_t +hb_subset_input_pin_axis_to_default (hb_subset_input_t *input, + hb_face_t *face, + hb_tag_t axis_tag); + +HB_EXTERN hb_bool_t +hb_subset_input_pin_axis_location (hb_subset_input_t *input, + hb_face_t *face, + hb_tag_t axis_tag, + float axis_value); + +HB_EXTERN hb_bool_t +hb_subset_input_get_axis_range (hb_subset_input_t *input, + hb_tag_t axis_tag, + float *axis_min_value, + float *axis_max_value, + float *axis_def_value); + +HB_EXTERN hb_bool_t +hb_subset_input_set_axis_range (hb_subset_input_t *input, + hb_face_t *face, + hb_tag_t axis_tag, + float axis_min_value, + float axis_max_value, + float axis_def_value); + +HB_EXTERN hb_bool_t +hb_subset_axis_range_from_string (const char *str, int len, + float *axis_min_value, + float *axis_max_value, + float *axis_def_value); + +HB_EXTERN void +hb_subset_axis_range_to_string (hb_subset_input_t *input, + hb_tag_t axis_tag, + char *buf, + unsigned size); + +#ifdef HB_EXPERIMENTAL_API +HB_EXTERN hb_bool_t +hb_subset_input_override_name_table (hb_subset_input_t *input, + hb_ot_name_id_t name_id, + unsigned platform_id, + unsigned encoding_id, + unsigned language_id, + const char *name_str, + int str_len); + + +/* +* Raw outline data access +*/ + +HB_EXTERN hb_blob_t* +hb_subset_cff_get_charstring_data (hb_face_t* face, hb_codepoint_t glyph_index); + +HB_EXTERN hb_blob_t* +hb_subset_cff_get_charstrings_index (hb_face_t* face); + +HB_EXTERN hb_blob_t* +hb_subset_cff2_get_charstring_data (hb_face_t* face, hb_codepoint_t glyph_index); + +HB_EXTERN hb_blob_t* +hb_subset_cff2_get_charstrings_index (hb_face_t* face); +#endif + +HB_EXTERN hb_face_t * +hb_subset_preprocess (hb_face_t *source); + +HB_EXTERN hb_face_t * +hb_subset_or_fail (hb_face_t *source, const hb_subset_input_t *input); + +HB_EXTERN hb_face_t * +hb_subset_plan_execute_or_fail (hb_subset_plan_t *plan); + +HB_EXTERN hb_subset_plan_t * +hb_subset_plan_create_or_fail (hb_face_t *face, + const hb_subset_input_t *input); + +HB_EXTERN void +hb_subset_plan_destroy (hb_subset_plan_t *plan); + +HB_EXTERN hb_map_t * +hb_subset_plan_old_to_new_glyph_mapping (const hb_subset_plan_t *plan); + +HB_EXTERN hb_map_t * +hb_subset_plan_new_to_old_glyph_mapping (const hb_subset_plan_t *plan); + +HB_EXTERN hb_map_t * +hb_subset_plan_unicode_to_old_glyph_mapping (const hb_subset_plan_t *plan); + + +HB_EXTERN hb_subset_plan_t * +hb_subset_plan_reference (hb_subset_plan_t *plan); + +HB_EXTERN hb_bool_t +hb_subset_plan_set_user_data (hb_subset_plan_t *plan, + hb_user_data_key_t *key, + void *data, + hb_destroy_func_t destroy, + hb_bool_t replace); + +HB_EXTERN void * +hb_subset_plan_get_user_data (const hb_subset_plan_t *plan, + hb_user_data_key_t *key); + + +HB_END_DECLS + +#endif /* HB_SUBSET_H */ diff --git a/dependencies/linux64/include/harfbuzz/hb-unicode.h b/dependencies/linux64/include/harfbuzz/hb-unicode.h new file mode 100644 index 0000000..5b5c45c --- /dev/null +++ b/dependencies/linux64/include/harfbuzz/hb-unicode.h @@ -0,0 +1,643 @@ +/* + * Copyright © 2009 Red Hat, Inc. + * Copyright © 2011 Codethink Limited + * Copyright © 2011,2012 Google, Inc. + * + * This is part of HarfBuzz, a text shaping library. + * + * Permission is hereby granted, without written agreement and without + * license or royalty fees, to use, copy, modify, and distribute this + * software and its documentation for any purpose, provided that the + * above copyright notice and the following two paragraphs appear in + * all copies of this software. + * + * IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE TO ANY PARTY FOR + * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES + * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN + * IF THE COPYRIGHT HOLDER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + * THE COPYRIGHT HOLDER SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, + * BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND + * FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS + * ON AN "AS IS" BASIS, AND THE COPYRIGHT HOLDER HAS NO OBLIGATION TO + * PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. + * + * Red Hat Author(s): Behdad Esfahbod + * Codethink Author(s): Ryan Lortie + * Google Author(s): Behdad Esfahbod + */ + +#if !defined(HB_H_IN) && !defined(HB_NO_SINGLE_HEADER_ERROR) +#error "Include instead." +#endif + +#ifndef HB_UNICODE_H +#define HB_UNICODE_H + +#include "hb-common.h" + +HB_BEGIN_DECLS + + +/** + * HB_UNICODE_MAX: + * + * Maximum valid Unicode code point. + * + * Since: 1.9.0 + **/ +#define HB_UNICODE_MAX 0x10FFFFu + + +/** + * hb_unicode_general_category_t: + * @HB_UNICODE_GENERAL_CATEGORY_CONTROL: [Cc] + * @HB_UNICODE_GENERAL_CATEGORY_FORMAT: [Cf] + * @HB_UNICODE_GENERAL_CATEGORY_UNASSIGNED: [Cn] + * @HB_UNICODE_GENERAL_CATEGORY_PRIVATE_USE: [Co] + * @HB_UNICODE_GENERAL_CATEGORY_SURROGATE: [Cs] + * @HB_UNICODE_GENERAL_CATEGORY_LOWERCASE_LETTER: [Ll] + * @HB_UNICODE_GENERAL_CATEGORY_MODIFIER_LETTER: [Lm] + * @HB_UNICODE_GENERAL_CATEGORY_OTHER_LETTER: [Lo] + * @HB_UNICODE_GENERAL_CATEGORY_TITLECASE_LETTER: [Lt] + * @HB_UNICODE_GENERAL_CATEGORY_UPPERCASE_LETTER: [Lu] + * @HB_UNICODE_GENERAL_CATEGORY_SPACING_MARK: [Mc] + * @HB_UNICODE_GENERAL_CATEGORY_ENCLOSING_MARK: [Me] + * @HB_UNICODE_GENERAL_CATEGORY_NON_SPACING_MARK: [Mn] + * @HB_UNICODE_GENERAL_CATEGORY_DECIMAL_NUMBER: [Nd] + * @HB_UNICODE_GENERAL_CATEGORY_LETTER_NUMBER: [Nl] + * @HB_UNICODE_GENERAL_CATEGORY_OTHER_NUMBER: [No] + * @HB_UNICODE_GENERAL_CATEGORY_CONNECT_PUNCTUATION: [Pc] + * @HB_UNICODE_GENERAL_CATEGORY_DASH_PUNCTUATION: [Pd] + * @HB_UNICODE_GENERAL_CATEGORY_CLOSE_PUNCTUATION: [Pe] + * @HB_UNICODE_GENERAL_CATEGORY_FINAL_PUNCTUATION: [Pf] + * @HB_UNICODE_GENERAL_CATEGORY_INITIAL_PUNCTUATION: [Pi] + * @HB_UNICODE_GENERAL_CATEGORY_OTHER_PUNCTUATION: [Po] + * @HB_UNICODE_GENERAL_CATEGORY_OPEN_PUNCTUATION: [Ps] + * @HB_UNICODE_GENERAL_CATEGORY_CURRENCY_SYMBOL: [Sc] + * @HB_UNICODE_GENERAL_CATEGORY_MODIFIER_SYMBOL: [Sk] + * @HB_UNICODE_GENERAL_CATEGORY_MATH_SYMBOL: [Sm] + * @HB_UNICODE_GENERAL_CATEGORY_OTHER_SYMBOL: [So] + * @HB_UNICODE_GENERAL_CATEGORY_LINE_SEPARATOR: [Zl] + * @HB_UNICODE_GENERAL_CATEGORY_PARAGRAPH_SEPARATOR: [Zp] + * @HB_UNICODE_GENERAL_CATEGORY_SPACE_SEPARATOR: [Zs] + * + * Data type for the "General_Category" (gc) property from + * the Unicode Character Database. + **/ + +/* Unicode Character Database property: General_Category (gc) */ +typedef enum +{ + HB_UNICODE_GENERAL_CATEGORY_CONTROL, /* Cc */ + HB_UNICODE_GENERAL_CATEGORY_FORMAT, /* Cf */ + HB_UNICODE_GENERAL_CATEGORY_UNASSIGNED, /* Cn */ + HB_UNICODE_GENERAL_CATEGORY_PRIVATE_USE, /* Co */ + HB_UNICODE_GENERAL_CATEGORY_SURROGATE, /* Cs */ + HB_UNICODE_GENERAL_CATEGORY_LOWERCASE_LETTER, /* Ll */ + HB_UNICODE_GENERAL_CATEGORY_MODIFIER_LETTER, /* Lm */ + HB_UNICODE_GENERAL_CATEGORY_OTHER_LETTER, /* Lo */ + HB_UNICODE_GENERAL_CATEGORY_TITLECASE_LETTER, /* Lt */ + HB_UNICODE_GENERAL_CATEGORY_UPPERCASE_LETTER, /* Lu */ + HB_UNICODE_GENERAL_CATEGORY_SPACING_MARK, /* Mc */ + HB_UNICODE_GENERAL_CATEGORY_ENCLOSING_MARK, /* Me */ + HB_UNICODE_GENERAL_CATEGORY_NON_SPACING_MARK, /* Mn */ + HB_UNICODE_GENERAL_CATEGORY_DECIMAL_NUMBER, /* Nd */ + HB_UNICODE_GENERAL_CATEGORY_LETTER_NUMBER, /* Nl */ + HB_UNICODE_GENERAL_CATEGORY_OTHER_NUMBER, /* No */ + HB_UNICODE_GENERAL_CATEGORY_CONNECT_PUNCTUATION, /* Pc */ + HB_UNICODE_GENERAL_CATEGORY_DASH_PUNCTUATION, /* Pd */ + HB_UNICODE_GENERAL_CATEGORY_CLOSE_PUNCTUATION, /* Pe */ + HB_UNICODE_GENERAL_CATEGORY_FINAL_PUNCTUATION, /* Pf */ + HB_UNICODE_GENERAL_CATEGORY_INITIAL_PUNCTUATION, /* Pi */ + HB_UNICODE_GENERAL_CATEGORY_OTHER_PUNCTUATION, /* Po */ + HB_UNICODE_GENERAL_CATEGORY_OPEN_PUNCTUATION, /* Ps */ + HB_UNICODE_GENERAL_CATEGORY_CURRENCY_SYMBOL, /* Sc */ + HB_UNICODE_GENERAL_CATEGORY_MODIFIER_SYMBOL, /* Sk */ + HB_UNICODE_GENERAL_CATEGORY_MATH_SYMBOL, /* Sm */ + HB_UNICODE_GENERAL_CATEGORY_OTHER_SYMBOL, /* So */ + HB_UNICODE_GENERAL_CATEGORY_LINE_SEPARATOR, /* Zl */ + HB_UNICODE_GENERAL_CATEGORY_PARAGRAPH_SEPARATOR, /* Zp */ + HB_UNICODE_GENERAL_CATEGORY_SPACE_SEPARATOR /* Zs */ +} hb_unicode_general_category_t; + +/** + * hb_unicode_combining_class_t: + * @HB_UNICODE_COMBINING_CLASS_NOT_REORDERED: Spacing and enclosing marks; also many vowel and consonant signs, even if nonspacing + * @HB_UNICODE_COMBINING_CLASS_OVERLAY: Marks which overlay a base letter or symbol + * @HB_UNICODE_COMBINING_CLASS_NUKTA: Diacritic nukta marks in Brahmi-derived scripts + * @HB_UNICODE_COMBINING_CLASS_KANA_VOICING: Hiragana/Katakana voicing marks + * @HB_UNICODE_COMBINING_CLASS_VIRAMA: Viramas + * @HB_UNICODE_COMBINING_CLASS_CCC10: [Hebrew] + * @HB_UNICODE_COMBINING_CLASS_CCC11: [Hebrew] + * @HB_UNICODE_COMBINING_CLASS_CCC12: [Hebrew] + * @HB_UNICODE_COMBINING_CLASS_CCC13: [Hebrew] + * @HB_UNICODE_COMBINING_CLASS_CCC14: [Hebrew] + * @HB_UNICODE_COMBINING_CLASS_CCC15: [Hebrew] + * @HB_UNICODE_COMBINING_CLASS_CCC16: [Hebrew] + * @HB_UNICODE_COMBINING_CLASS_CCC17: [Hebrew] + * @HB_UNICODE_COMBINING_CLASS_CCC18: [Hebrew] + * @HB_UNICODE_COMBINING_CLASS_CCC19: [Hebrew] + * @HB_UNICODE_COMBINING_CLASS_CCC20: [Hebrew] + * @HB_UNICODE_COMBINING_CLASS_CCC21: [Hebrew] + * @HB_UNICODE_COMBINING_CLASS_CCC22: [Hebrew] + * @HB_UNICODE_COMBINING_CLASS_CCC23: [Hebrew] + * @HB_UNICODE_COMBINING_CLASS_CCC24: [Hebrew] + * @HB_UNICODE_COMBINING_CLASS_CCC25: [Hebrew] + * @HB_UNICODE_COMBINING_CLASS_CCC26: [Hebrew] + * @HB_UNICODE_COMBINING_CLASS_CCC27: [Arabic] + * @HB_UNICODE_COMBINING_CLASS_CCC28: [Arabic] + * @HB_UNICODE_COMBINING_CLASS_CCC29: [Arabic] + * @HB_UNICODE_COMBINING_CLASS_CCC30: [Arabic] + * @HB_UNICODE_COMBINING_CLASS_CCC31: [Arabic] + * @HB_UNICODE_COMBINING_CLASS_CCC32: [Arabic] + * @HB_UNICODE_COMBINING_CLASS_CCC33: [Arabic] + * @HB_UNICODE_COMBINING_CLASS_CCC34: [Arabic] + * @HB_UNICODE_COMBINING_CLASS_CCC35: [Arabic] + * @HB_UNICODE_COMBINING_CLASS_CCC36: [Syriac] + * @HB_UNICODE_COMBINING_CLASS_CCC84: [Telugu] + * @HB_UNICODE_COMBINING_CLASS_CCC91: [Telugu] + * @HB_UNICODE_COMBINING_CLASS_CCC103: [Thai] + * @HB_UNICODE_COMBINING_CLASS_CCC107: [Thai] + * @HB_UNICODE_COMBINING_CLASS_CCC118: [Lao] + * @HB_UNICODE_COMBINING_CLASS_CCC122: [Lao] + * @HB_UNICODE_COMBINING_CLASS_CCC129: [Tibetan] + * @HB_UNICODE_COMBINING_CLASS_CCC130: [Tibetan] + * @HB_UNICODE_COMBINING_CLASS_CCC132: [Tibetan] Since: 7.2.0 + * @HB_UNICODE_COMBINING_CLASS_ATTACHED_BELOW_LEFT: Marks attached at the bottom left + * @HB_UNICODE_COMBINING_CLASS_ATTACHED_BELOW: Marks attached directly below + * @HB_UNICODE_COMBINING_CLASS_ATTACHED_ABOVE: Marks attached directly above + * @HB_UNICODE_COMBINING_CLASS_ATTACHED_ABOVE_RIGHT: Marks attached at the top right + * @HB_UNICODE_COMBINING_CLASS_BELOW_LEFT: Distinct marks at the bottom left + * @HB_UNICODE_COMBINING_CLASS_BELOW: Distinct marks directly below + * @HB_UNICODE_COMBINING_CLASS_BELOW_RIGHT: Distinct marks at the bottom right + * @HB_UNICODE_COMBINING_CLASS_LEFT: Distinct marks to the left + * @HB_UNICODE_COMBINING_CLASS_RIGHT: Distinct marks to the right + * @HB_UNICODE_COMBINING_CLASS_ABOVE_LEFT: Distinct marks at the top left + * @HB_UNICODE_COMBINING_CLASS_ABOVE: Distinct marks directly above + * @HB_UNICODE_COMBINING_CLASS_ABOVE_RIGHT: Distinct marks at the top right + * @HB_UNICODE_COMBINING_CLASS_DOUBLE_BELOW: Distinct marks subtending two bases + * @HB_UNICODE_COMBINING_CLASS_DOUBLE_ABOVE: Distinct marks extending above two bases + * @HB_UNICODE_COMBINING_CLASS_IOTA_SUBSCRIPT: Greek iota subscript only + * @HB_UNICODE_COMBINING_CLASS_INVALID: Invalid combining class + * + * Data type for the Canonical_Combining_Class (ccc) property + * from the Unicode Character Database. + * + * Note: newer versions of Unicode may add new values. + * Client programs should be ready to handle any value in the 0..254 range + * being returned from hb_unicode_combining_class(). + * + **/ +typedef enum +{ + HB_UNICODE_COMBINING_CLASS_NOT_REORDERED = 0, + HB_UNICODE_COMBINING_CLASS_OVERLAY = 1, + HB_UNICODE_COMBINING_CLASS_NUKTA = 7, + HB_UNICODE_COMBINING_CLASS_KANA_VOICING = 8, + HB_UNICODE_COMBINING_CLASS_VIRAMA = 9, + + /* Hebrew */ + HB_UNICODE_COMBINING_CLASS_CCC10 = 10, + HB_UNICODE_COMBINING_CLASS_CCC11 = 11, + HB_UNICODE_COMBINING_CLASS_CCC12 = 12, + HB_UNICODE_COMBINING_CLASS_CCC13 = 13, + HB_UNICODE_COMBINING_CLASS_CCC14 = 14, + HB_UNICODE_COMBINING_CLASS_CCC15 = 15, + HB_UNICODE_COMBINING_CLASS_CCC16 = 16, + HB_UNICODE_COMBINING_CLASS_CCC17 = 17, + HB_UNICODE_COMBINING_CLASS_CCC18 = 18, + HB_UNICODE_COMBINING_CLASS_CCC19 = 19, + HB_UNICODE_COMBINING_CLASS_CCC20 = 20, + HB_UNICODE_COMBINING_CLASS_CCC21 = 21, + HB_UNICODE_COMBINING_CLASS_CCC22 = 22, + HB_UNICODE_COMBINING_CLASS_CCC23 = 23, + HB_UNICODE_COMBINING_CLASS_CCC24 = 24, + HB_UNICODE_COMBINING_CLASS_CCC25 = 25, + HB_UNICODE_COMBINING_CLASS_CCC26 = 26, + + /* Arabic */ + HB_UNICODE_COMBINING_CLASS_CCC27 = 27, + HB_UNICODE_COMBINING_CLASS_CCC28 = 28, + HB_UNICODE_COMBINING_CLASS_CCC29 = 29, + HB_UNICODE_COMBINING_CLASS_CCC30 = 30, + HB_UNICODE_COMBINING_CLASS_CCC31 = 31, + HB_UNICODE_COMBINING_CLASS_CCC32 = 32, + HB_UNICODE_COMBINING_CLASS_CCC33 = 33, + HB_UNICODE_COMBINING_CLASS_CCC34 = 34, + HB_UNICODE_COMBINING_CLASS_CCC35 = 35, + + /* Syriac */ + HB_UNICODE_COMBINING_CLASS_CCC36 = 36, + + /* Telugu */ + HB_UNICODE_COMBINING_CLASS_CCC84 = 84, + HB_UNICODE_COMBINING_CLASS_CCC91 = 91, + + /* Thai */ + HB_UNICODE_COMBINING_CLASS_CCC103 = 103, + HB_UNICODE_COMBINING_CLASS_CCC107 = 107, + + /* Lao */ + HB_UNICODE_COMBINING_CLASS_CCC118 = 118, + HB_UNICODE_COMBINING_CLASS_CCC122 = 122, + + /* Tibetan */ + HB_UNICODE_COMBINING_CLASS_CCC129 = 129, + HB_UNICODE_COMBINING_CLASS_CCC130 = 130, + HB_UNICODE_COMBINING_CLASS_CCC132 = 132, + + + HB_UNICODE_COMBINING_CLASS_ATTACHED_BELOW_LEFT = 200, + HB_UNICODE_COMBINING_CLASS_ATTACHED_BELOW = 202, + HB_UNICODE_COMBINING_CLASS_ATTACHED_ABOVE = 214, + HB_UNICODE_COMBINING_CLASS_ATTACHED_ABOVE_RIGHT = 216, + HB_UNICODE_COMBINING_CLASS_BELOW_LEFT = 218, + HB_UNICODE_COMBINING_CLASS_BELOW = 220, + HB_UNICODE_COMBINING_CLASS_BELOW_RIGHT = 222, + HB_UNICODE_COMBINING_CLASS_LEFT = 224, + HB_UNICODE_COMBINING_CLASS_RIGHT = 226, + HB_UNICODE_COMBINING_CLASS_ABOVE_LEFT = 228, + HB_UNICODE_COMBINING_CLASS_ABOVE = 230, + HB_UNICODE_COMBINING_CLASS_ABOVE_RIGHT = 232, + HB_UNICODE_COMBINING_CLASS_DOUBLE_BELOW = 233, + HB_UNICODE_COMBINING_CLASS_DOUBLE_ABOVE = 234, + + HB_UNICODE_COMBINING_CLASS_IOTA_SUBSCRIPT = 240, + + HB_UNICODE_COMBINING_CLASS_INVALID = 255 +} hb_unicode_combining_class_t; + + +/* + * hb_unicode_funcs_t + */ + +/** + * hb_unicode_funcs_t: + * + * Data type containing a set of virtual methods used for + * accessing various Unicode character properties. + * + * HarfBuzz provides a default function for each of the + * methods in #hb_unicode_funcs_t. Client programs can implement + * their own replacements for the individual Unicode functions, as + * needed, and replace the default by calling the setter for a + * method. + **/ +typedef struct hb_unicode_funcs_t hb_unicode_funcs_t; + + +/* + * just give me the best implementation you've got there. + */ +HB_EXTERN hb_unicode_funcs_t * +hb_unicode_funcs_get_default (void); + + +HB_EXTERN hb_unicode_funcs_t * +hb_unicode_funcs_create (hb_unicode_funcs_t *parent); + +HB_EXTERN hb_unicode_funcs_t * +hb_unicode_funcs_get_empty (void); + +HB_EXTERN hb_unicode_funcs_t * +hb_unicode_funcs_reference (hb_unicode_funcs_t *ufuncs); + +HB_EXTERN void +hb_unicode_funcs_destroy (hb_unicode_funcs_t *ufuncs); + +HB_EXTERN hb_bool_t +hb_unicode_funcs_set_user_data (hb_unicode_funcs_t *ufuncs, + hb_user_data_key_t *key, + void * data, + hb_destroy_func_t destroy, + hb_bool_t replace); + + +HB_EXTERN void * +hb_unicode_funcs_get_user_data (const hb_unicode_funcs_t *ufuncs, + hb_user_data_key_t *key); + + +HB_EXTERN void +hb_unicode_funcs_make_immutable (hb_unicode_funcs_t *ufuncs); + +HB_EXTERN hb_bool_t +hb_unicode_funcs_is_immutable (hb_unicode_funcs_t *ufuncs); + +HB_EXTERN hb_unicode_funcs_t * +hb_unicode_funcs_get_parent (hb_unicode_funcs_t *ufuncs); + + +/* + * funcs + */ + +/* typedefs */ + +/** + * hb_unicode_combining_class_func_t: + * @ufuncs: A Unicode-functions structure + * @unicode: The code point to query + * @user_data: User data pointer passed by the caller + * + * A virtual method for the #hb_unicode_funcs_t structure. + * + * This method should retrieve the Canonical Combining Class (ccc) + * property for a specified Unicode code point. + * + * Return value: The #hb_unicode_combining_class_t of @unicode + * + **/ +typedef hb_unicode_combining_class_t (*hb_unicode_combining_class_func_t) (hb_unicode_funcs_t *ufuncs, + hb_codepoint_t unicode, + void *user_data); + +/** + * hb_unicode_general_category_func_t: + * @ufuncs: A Unicode-functions structure + * @unicode: The code point to query + * @user_data: User data pointer passed by the caller + * + * A virtual method for the #hb_unicode_funcs_t structure. + * + * This method should retrieve the General Category property for + * a specified Unicode code point. + * + * Return value: The #hb_unicode_general_category_t of @unicode + * + **/ +typedef hb_unicode_general_category_t (*hb_unicode_general_category_func_t) (hb_unicode_funcs_t *ufuncs, + hb_codepoint_t unicode, + void *user_data); + +/** + * hb_unicode_mirroring_func_t: + * @ufuncs: A Unicode-functions structure + * @unicode: The code point to query + * @user_data: User data pointer passed by the caller + * + * A virtual method for the #hb_unicode_funcs_t structure. + * + * This method should retrieve the Bi-Directional Mirroring Glyph + * code point for a specified Unicode code point. + * + * Note: If a code point does not have a specified + * Bi-Directional Mirroring Glyph defined, the method should + * return the original code point. + * + * Return value: The #hb_codepoint_t of the Mirroring Glyph for @unicode + * + **/ +typedef hb_codepoint_t (*hb_unicode_mirroring_func_t) (hb_unicode_funcs_t *ufuncs, + hb_codepoint_t unicode, + void *user_data); + +/** + * hb_unicode_script_func_t: + * @ufuncs: A Unicode-functions structure + * @unicode: The code point to query + * @user_data: User data pointer passed by the caller + * + * A virtual method for the #hb_unicode_funcs_t structure. + * + * This method should retrieve the Script property for a + * specified Unicode code point. + * + * Return value: The #hb_script_t of @unicode + * + **/ +typedef hb_script_t (*hb_unicode_script_func_t) (hb_unicode_funcs_t *ufuncs, + hb_codepoint_t unicode, + void *user_data); + +/** + * hb_unicode_compose_func_t: + * @ufuncs: A Unicode-functions structure + * @a: The first code point to compose + * @b: The second code point to compose + * @ab: (out): The composed code point + * @user_data: user data pointer passed by the caller + * + * A virtual method for the #hb_unicode_funcs_t structure. + * + * This method should compose a sequence of two input Unicode code + * points by canonical equivalence, returning the composed code + * point in a #hb_codepoint_t output parameter (if successful). + * The method must return an #hb_bool_t indicating the success + * of the composition. + * + * Return value: `true` is @a,@b composed, `false` otherwise + * + **/ +typedef hb_bool_t (*hb_unicode_compose_func_t) (hb_unicode_funcs_t *ufuncs, + hb_codepoint_t a, + hb_codepoint_t b, + hb_codepoint_t *ab, + void *user_data); + +/** + * hb_unicode_decompose_func_t: + * @ufuncs: A Unicode-functions structure + * @ab: The code point to decompose + * @a: (out): The first decomposed code point + * @b: (out): The second decomposed code point + * @user_data: user data pointer passed by the caller + * + * A virtual method for the #hb_unicode_funcs_t structure. + * + * This method should decompose an input Unicode code point, + * returning the two decomposed code points in #hb_codepoint_t + * output parameters (if successful). The method must return an + * #hb_bool_t indicating the success of the composition. + * + * Return value: `true` if @ab decomposed, `false` otherwise + * + **/ +typedef hb_bool_t (*hb_unicode_decompose_func_t) (hb_unicode_funcs_t *ufuncs, + hb_codepoint_t ab, + hb_codepoint_t *a, + hb_codepoint_t *b, + void *user_data); + +/* func setters */ + +/** + * hb_unicode_funcs_set_combining_class_func: + * @ufuncs: A Unicode-functions structure + * @func: (closure user_data) (destroy destroy) (scope notified): The callback function to assign + * @user_data: Data to pass to @func + * @destroy: (nullable): The function to call when @user_data is not needed anymore + * + * Sets the implementation function for #hb_unicode_combining_class_func_t. + * + * Since: 0.9.2 + **/ +HB_EXTERN void +hb_unicode_funcs_set_combining_class_func (hb_unicode_funcs_t *ufuncs, + hb_unicode_combining_class_func_t func, + void *user_data, hb_destroy_func_t destroy); + +/** + * hb_unicode_funcs_set_general_category_func: + * @ufuncs: A Unicode-functions structure + * @func: (closure user_data) (destroy destroy) (scope notified): The callback function to assign + * @user_data: Data to pass to @func + * @destroy: (nullable): The function to call when @user_data is not needed anymore + * + * Sets the implementation function for #hb_unicode_general_category_func_t. + * + * Since: 0.9.2 + **/ +HB_EXTERN void +hb_unicode_funcs_set_general_category_func (hb_unicode_funcs_t *ufuncs, + hb_unicode_general_category_func_t func, + void *user_data, hb_destroy_func_t destroy); + +/** + * hb_unicode_funcs_set_mirroring_func: + * @ufuncs: A Unicode-functions structure + * @func: (closure user_data) (destroy destroy) (scope notified): The callback function to assign + * @user_data: Data to pass to @func + * @destroy: (nullable): The function to call when @user_data is not needed anymore + * + * Sets the implementation function for #hb_unicode_mirroring_func_t. + * + * Since: 0.9.2 + **/ +HB_EXTERN void +hb_unicode_funcs_set_mirroring_func (hb_unicode_funcs_t *ufuncs, + hb_unicode_mirroring_func_t func, + void *user_data, hb_destroy_func_t destroy); + +/** + * hb_unicode_funcs_set_script_func: + * @ufuncs: A Unicode-functions structure + * @func: (closure user_data) (destroy destroy) (scope notified): The callback function to assign + * @user_data: Data to pass to @func + * @destroy: (nullable): The function to call when @user_data is not needed anymore + * + * Sets the implementation function for #hb_unicode_script_func_t. + * + * Since: 0.9.2 + **/ +HB_EXTERN void +hb_unicode_funcs_set_script_func (hb_unicode_funcs_t *ufuncs, + hb_unicode_script_func_t func, + void *user_data, hb_destroy_func_t destroy); + +/** + * hb_unicode_funcs_set_compose_func: + * @ufuncs: A Unicode-functions structure + * @func: (closure user_data) (destroy destroy) (scope notified): The callback function to assign + * @user_data: Data to pass to @func + * @destroy: (nullable): The function to call when @user_data is not needed anymore + * + * Sets the implementation function for #hb_unicode_compose_func_t. + * + * Since: 0.9.2 + **/ +HB_EXTERN void +hb_unicode_funcs_set_compose_func (hb_unicode_funcs_t *ufuncs, + hb_unicode_compose_func_t func, + void *user_data, hb_destroy_func_t destroy); + +/** + * hb_unicode_funcs_set_decompose_func: + * @ufuncs: A Unicode-functions structure + * @func: (closure user_data) (destroy destroy) (scope notified): The callback function to assign + * @user_data: Data to pass to @func + * @destroy: (nullable): The function to call when @user_data is not needed anymore + * + * Sets the implementation function for #hb_unicode_decompose_func_t. + * + * Since: 0.9.2 + **/ +HB_EXTERN void +hb_unicode_funcs_set_decompose_func (hb_unicode_funcs_t *ufuncs, + hb_unicode_decompose_func_t func, + void *user_data, hb_destroy_func_t destroy); + +/* accessors */ + +/** + * hb_unicode_combining_class: + * @ufuncs: The Unicode-functions structure + * @unicode: The code point to query + * + * Retrieves the Canonical Combining Class (ccc) property + * of code point @unicode. + * + * Return value: The #hb_unicode_combining_class_t of @unicode + * + * Since: 0.9.2 + **/ +HB_EXTERN hb_unicode_combining_class_t +hb_unicode_combining_class (hb_unicode_funcs_t *ufuncs, + hb_codepoint_t unicode); + +/** + * hb_unicode_general_category: + * @ufuncs: The Unicode-functions structure + * @unicode: The code point to query + * + * Retrieves the General Category (gc) property + * of code point @unicode. + * + * Return value: The #hb_unicode_general_category_t of @unicode + * + * Since: 0.9.2 + **/ +HB_EXTERN hb_unicode_general_category_t +hb_unicode_general_category (hb_unicode_funcs_t *ufuncs, + hb_codepoint_t unicode); + +/** + * hb_unicode_mirroring: + * @ufuncs: The Unicode-functions structure + * @unicode: The code point to query + * + * Retrieves the Bi-directional Mirroring Glyph code + * point defined for code point @unicode. + * + * Return value: The #hb_codepoint_t of the Mirroring Glyph for @unicode + * + * Since: 0.9.2 + **/ +HB_EXTERN hb_codepoint_t +hb_unicode_mirroring (hb_unicode_funcs_t *ufuncs, + hb_codepoint_t unicode); + +/** + * hb_unicode_script: + * @ufuncs: The Unicode-functions structure + * @unicode: The code point to query + * + * Retrieves the #hb_script_t script to which code + * point @unicode belongs. + * + * Return value: The #hb_script_t of @unicode + * + * Since: 0.9.2 + **/ +HB_EXTERN hb_script_t +hb_unicode_script (hb_unicode_funcs_t *ufuncs, + hb_codepoint_t unicode); + +HB_EXTERN hb_bool_t +hb_unicode_compose (hb_unicode_funcs_t *ufuncs, + hb_codepoint_t a, + hb_codepoint_t b, + hb_codepoint_t *ab); + +HB_EXTERN hb_bool_t +hb_unicode_decompose (hb_unicode_funcs_t *ufuncs, + hb_codepoint_t ab, + hb_codepoint_t *a, + hb_codepoint_t *b); + +HB_END_DECLS + +#endif /* HB_UNICODE_H */ diff --git a/dependencies/linux64/include/harfbuzz/hb-version.h b/dependencies/linux64/include/harfbuzz/hb-version.h new file mode 100644 index 0000000..85d760b --- /dev/null +++ b/dependencies/linux64/include/harfbuzz/hb-version.h @@ -0,0 +1,95 @@ +/* + * Copyright © 2011 Google, Inc. + * + * This is part of HarfBuzz, a text shaping library. + * + * Permission is hereby granted, without written agreement and without + * license or royalty fees, to use, copy, modify, and distribute this + * software and its documentation for any purpose, provided that the + * above copyright notice and the following two paragraphs appear in + * all copies of this software. + * + * IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE TO ANY PARTY FOR + * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES + * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN + * IF THE COPYRIGHT HOLDER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + * THE COPYRIGHT HOLDER SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, + * BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND + * FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS + * ON AN "AS IS" BASIS, AND THE COPYRIGHT HOLDER HAS NO OBLIGATION TO + * PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. + * + * Google Author(s): Behdad Esfahbod + */ + +#if !defined(HB_H_IN) && !defined(HB_NO_SINGLE_HEADER_ERROR) +#error "Include instead." +#endif + +#ifndef HB_VERSION_H +#define HB_VERSION_H + +#include "hb-common.h" + +HB_BEGIN_DECLS + + +/** + * HB_VERSION_MAJOR: + * + * The major component of the library version available at compile-time. + */ +#define HB_VERSION_MAJOR 11 +/** + * HB_VERSION_MINOR: + * + * The minor component of the library version available at compile-time. + */ +#define HB_VERSION_MINOR 2 +/** + * HB_VERSION_MICRO: + * + * The micro component of the library version available at compile-time. + */ +#define HB_VERSION_MICRO 1 + +/** + * HB_VERSION_STRING: + * + * A string literal containing the library version available at compile-time. + */ +#define HB_VERSION_STRING "11.2.1" + +/** + * HB_VERSION_ATLEAST: + * @major: the major component of the version number + * @minor: the minor component of the version number + * @micro: the micro component of the version number + * + * Tests the library version at compile-time against a minimum value, + * as three integer components. + */ +#define HB_VERSION_ATLEAST(major,minor,micro) \ + ((major)*10000+(minor)*100+(micro) <= \ + HB_VERSION_MAJOR*10000+HB_VERSION_MINOR*100+HB_VERSION_MICRO) + + +HB_EXTERN void +hb_version (unsigned int *major, + unsigned int *minor, + unsigned int *micro); + +HB_EXTERN const char * +hb_version_string (void); + +HB_EXTERN hb_bool_t +hb_version_atleast (unsigned int major, + unsigned int minor, + unsigned int micro); + + +HB_END_DECLS + +#endif /* HB_VERSION_H */ diff --git a/dependencies/linux64/include/harfbuzz/hb.h b/dependencies/linux64/include/harfbuzz/hb.h new file mode 100644 index 0000000..5a6ae66 --- /dev/null +++ b/dependencies/linux64/include/harfbuzz/hb.h @@ -0,0 +1,51 @@ +/* + * Copyright © 2009 Red Hat, Inc. + * + * This is part of HarfBuzz, a text shaping library. + * + * Permission is hereby granted, without written agreement and without + * license or royalty fees, to use, copy, modify, and distribute this + * software and its documentation for any purpose, provided that the + * above copyright notice and the following two paragraphs appear in + * all copies of this software. + * + * IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE TO ANY PARTY FOR + * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES + * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN + * IF THE COPYRIGHT HOLDER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + * THE COPYRIGHT HOLDER SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, + * BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND + * FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS + * ON AN "AS IS" BASIS, AND THE COPYRIGHT HOLDER HAS NO OBLIGATION TO + * PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. + * + * Red Hat Author(s): Behdad Esfahbod + */ + +#ifndef HB_H +#define HB_H +#define HB_H_IN + +#include "hb-blob.h" +#include "hb-buffer.h" +#include "hb-common.h" +#include "hb-deprecated.h" +#include "hb-draw.h" +#include "hb-face.h" +#include "hb-font.h" +#include "hb-map.h" +#include "hb-paint.h" +#include "hb-set.h" +#include "hb-shape.h" +#include "hb-shape-plan.h" +#include "hb-style.h" +#include "hb-unicode.h" +#include "hb-version.h" + +HB_BEGIN_DECLS +HB_END_DECLS + +#undef HB_H_IN +#endif /* HB_H */ diff --git a/dependencies/linux64/include/libpng16/png.h b/dependencies/linux64/include/libpng16/png.h new file mode 100644 index 0000000..9b069e4 --- /dev/null +++ b/dependencies/linux64/include/libpng16/png.h @@ -0,0 +1,3358 @@ +/* png.h - header file for PNG reference library + * + * libpng version 1.6.47 + * + * Copyright (c) 2018-2025 Cosmin Truta + * Copyright (c) 1998-2002,2004,2006-2018 Glenn Randers-Pehrson + * Copyright (c) 1996-1997 Andreas Dilger + * Copyright (c) 1995-1996 Guy Eric Schalnat, Group 42, Inc. + * + * This code is released under the libpng license. (See LICENSE, below.) + * + * Authors and maintainers: + * libpng versions 0.71, May 1995, through 0.88, January 1996: Guy Schalnat + * libpng versions 0.89, June 1996, through 0.96, May 1997: Andreas Dilger + * libpng versions 0.97, January 1998, through 1.6.35, July 2018: + * Glenn Randers-Pehrson + * libpng versions 1.6.36, December 2018, through 1.6.47, February 2025: + * Cosmin Truta + * See also "Contributing Authors", below. + */ + +/* + * COPYRIGHT NOTICE, DISCLAIMER, and LICENSE + * ========================================= + * + * PNG Reference Library License version 2 + * --------------------------------------- + * + * * Copyright (c) 1995-2025 The PNG Reference Library Authors. + * * Copyright (c) 2018-2025 Cosmin Truta. + * * Copyright (c) 2000-2002, 2004, 2006-2018 Glenn Randers-Pehrson. + * * Copyright (c) 1996-1997 Andreas Dilger. + * * Copyright (c) 1995-1996 Guy Eric Schalnat, Group 42, Inc. + * + * The software is supplied "as is", without warranty of any kind, + * express or implied, including, without limitation, the warranties + * of merchantability, fitness for a particular purpose, title, and + * non-infringement. In no event shall the Copyright owners, or + * anyone distributing the software, be liable for any damages or + * other liability, whether in contract, tort or otherwise, arising + * from, out of, or in connection with the software, or the use or + * other dealings in the software, even if advised of the possibility + * of such damage. + * + * Permission is hereby granted to use, copy, modify, and distribute + * this software, or portions hereof, for any purpose, without fee, + * subject to the following restrictions: + * + * 1. The origin of this software must not be misrepresented; you + * must not claim that you wrote the original software. If you + * use this software in a product, an acknowledgment in the product + * documentation would be appreciated, but is not required. + * + * 2. Altered source versions must be plainly marked as such, and must + * not be misrepresented as being the original software. + * + * 3. This Copyright notice may not be removed or altered from any + * source or altered source distribution. + * + * + * PNG Reference Library License version 1 (for libpng 0.5 through 1.6.35) + * ----------------------------------------------------------------------- + * + * libpng versions 1.0.7, July 1, 2000, through 1.6.35, July 15, 2018 are + * Copyright (c) 2000-2002, 2004, 2006-2018 Glenn Randers-Pehrson, are + * derived from libpng-1.0.6, and are distributed according to the same + * disclaimer and license as libpng-1.0.6 with the following individuals + * added to the list of Contributing Authors: + * + * Simon-Pierre Cadieux + * Eric S. Raymond + * Mans Rullgard + * Cosmin Truta + * Gilles Vollant + * James Yu + * Mandar Sahastrabuddhe + * Google Inc. + * Vadim Barkov + * + * and with the following additions to the disclaimer: + * + * There is no warranty against interference with your enjoyment of + * the library or against infringement. There is no warranty that our + * efforts or the library will fulfill any of your particular purposes + * or needs. This library is provided with all faults, and the entire + * risk of satisfactory quality, performance, accuracy, and effort is + * with the user. + * + * Some files in the "contrib" directory and some configure-generated + * files that are distributed with libpng have other copyright owners, and + * are released under other open source licenses. + * + * libpng versions 0.97, January 1998, through 1.0.6, March 20, 2000, are + * Copyright (c) 1998-2000 Glenn Randers-Pehrson, are derived from + * libpng-0.96, and are distributed according to the same disclaimer and + * license as libpng-0.96, with the following individuals added to the + * list of Contributing Authors: + * + * Tom Lane + * Glenn Randers-Pehrson + * Willem van Schaik + * + * libpng versions 0.89, June 1996, through 0.96, May 1997, are + * Copyright (c) 1996-1997 Andreas Dilger, are derived from libpng-0.88, + * and are distributed according to the same disclaimer and license as + * libpng-0.88, with the following individuals added to the list of + * Contributing Authors: + * + * John Bowler + * Kevin Bracey + * Sam Bushell + * Magnus Holmgren + * Greg Roelofs + * Tom Tanner + * + * Some files in the "scripts" directory have other copyright owners, + * but are released under this license. + * + * libpng versions 0.5, May 1995, through 0.88, January 1996, are + * Copyright (c) 1995-1996 Guy Eric Schalnat, Group 42, Inc. + * + * For the purposes of this copyright and license, "Contributing Authors" + * is defined as the following set of individuals: + * + * Andreas Dilger + * Dave Martindale + * Guy Eric Schalnat + * Paul Schmidt + * Tim Wegner + * + * The PNG Reference Library is supplied "AS IS". The Contributing + * Authors and Group 42, Inc. disclaim all warranties, expressed or + * implied, including, without limitation, the warranties of + * merchantability and of fitness for any purpose. The Contributing + * Authors and Group 42, Inc. assume no liability for direct, indirect, + * incidental, special, exemplary, or consequential damages, which may + * result from the use of the PNG Reference Library, even if advised of + * the possibility of such damage. + * + * Permission is hereby granted to use, copy, modify, and distribute this + * source code, or portions hereof, for any purpose, without fee, subject + * to the following restrictions: + * + * 1. The origin of this source code must not be misrepresented. + * + * 2. Altered versions must be plainly marked as such and must not + * be misrepresented as being the original source. + * + * 3. This Copyright notice may not be removed or altered from any + * source or altered source distribution. + * + * The Contributing Authors and Group 42, Inc. specifically permit, + * without fee, and encourage the use of this source code as a component + * to supporting the PNG file format in commercial products. If you use + * this source code in a product, acknowledgment is not required but would + * be appreciated. + * + * END OF COPYRIGHT NOTICE, DISCLAIMER, and LICENSE. + * + * TRADEMARK + * ========= + * + * The name "libpng" has not been registered by the Copyright owners + * as a trademark in any jurisdiction. However, because libpng has + * been distributed and maintained world-wide, continually since 1995, + * the Copyright owners claim "common-law trademark protection" in any + * jurisdiction where common-law trademark is recognized. + */ + +/* + * A "png_get_copyright" function is available, for convenient use in "about" + * boxes and the like: + * + * printf("%s", png_get_copyright(NULL)); + * + * Also, the PNG logo (in PNG format, of course) is supplied in the + * files "pngbar.png" and "pngbar.jpg (88x31) and "pngnow.png" (98x31). + */ + +/* + * The contributing authors would like to thank all those who helped + * with testing, bug fixes, and patience. This wouldn't have been + * possible without all of you. + * + * Thanks to Frank J. T. Wojcik for helping with the documentation. + */ + +/* Note about libpng version numbers: + * + * Due to various miscommunications, unforeseen code incompatibilities + * and occasional factors outside the authors' control, version numbering + * on the library has not always been consistent and straightforward. + * The following table summarizes matters since version 0.89c, which was + * the first widely used release: + * + * source png.h png.h shared-lib + * version string int version + * ------- ------ ----- ---------- + * 0.89c "1.0 beta 3" 0.89 89 1.0.89 + * 0.90 "1.0 beta 4" 0.90 90 0.90 [should have been 2.0.90] + * 0.95 "1.0 beta 5" 0.95 95 0.95 [should have been 2.0.95] + * 0.96 "1.0 beta 6" 0.96 96 0.96 [should have been 2.0.96] + * 0.97b "1.00.97 beta 7" 1.00.97 97 1.0.1 [should have been 2.0.97] + * 0.97c 0.97 97 2.0.97 + * 0.98 0.98 98 2.0.98 + * 0.99 0.99 98 2.0.99 + * 0.99a-m 0.99 99 2.0.99 + * 1.00 1.00 100 2.1.0 [100 should be 10000] + * 1.0.0 (from here on, the 100 2.1.0 [100 should be 10000] + * 1.0.1 png.h string is 10001 2.1.0 + * 1.0.1a-e identical to the 10002 from here on, the shared library + * 1.0.2 source version) 10002 is 2.V where V is the source code + * 1.0.2a-b 10003 version, except as noted. + * 1.0.3 10003 + * 1.0.3a-d 10004 + * 1.0.4 10004 + * 1.0.4a-f 10005 + * 1.0.5 (+ 2 patches) 10005 + * 1.0.5a-d 10006 + * 1.0.5e-r 10100 (not source compatible) + * 1.0.5s-v 10006 (not binary compatible) + * 1.0.6 (+ 3 patches) 10006 (still binary incompatible) + * 1.0.6d-f 10007 (still binary incompatible) + * 1.0.6g 10007 + * 1.0.6h 10007 10.6h (testing xy.z so-numbering) + * 1.0.6i 10007 10.6i + * 1.0.6j 10007 2.1.0.6j (incompatible with 1.0.0) + * 1.0.7beta11-14 DLLNUM 10007 2.1.0.7beta11-14 (binary compatible) + * 1.0.7beta15-18 1 10007 2.1.0.7beta15-18 (binary compatible) + * 1.0.7rc1-2 1 10007 2.1.0.7rc1-2 (binary compatible) + * 1.0.7 1 10007 (still compatible) + * ... + * 1.0.69 10 10069 10.so.0.69[.0] + * ... + * 1.2.59 13 10259 12.so.0.59[.0] + * ... + * 1.4.20 14 10420 14.so.0.20[.0] + * ... + * 1.5.30 15 10530 15.so.15.30[.0] + * ... + * 1.6.47 16 10647 16.so.16.47[.0] + * + * Henceforth the source version will match the shared-library major and + * minor numbers; the shared-library major version number will be used for + * changes in backward compatibility, as it is intended. + * The PNG_LIBPNG_VER macro, which is not used within libpng but is + * available for applications, is an unsigned integer of the form XYYZZ + * corresponding to the source version X.Y.Z (leading zeros in Y and Z). + * Beta versions were given the previous public release number plus a + * letter, until version 1.0.6j; from then on they were given the upcoming + * public release number plus "betaNN" or "rcNN". + * + * Binary incompatibility exists only when applications make direct access + * to the info_ptr or png_ptr members through png.h, and the compiled + * application is loaded with a different version of the library. + * + * See libpng.txt or libpng.3 for more information. The PNG specification + * is available as a W3C Recommendation and as an ISO/IEC Standard; see + * + */ + +#ifndef PNG_H +#define PNG_H + +/* This is not the place to learn how to use libpng. The file libpng-manual.txt + * describes how to use libpng, and the file example.c summarizes it + * with some code on which to build. This file is useful for looking + * at the actual function definitions and structure components. If that + * file has been stripped from your copy of libpng, you can find it at + * + * + * If you just need to read a PNG file and don't want to read the documentation + * skip to the end of this file and read the section entitled 'simplified API'. + */ + +/* Version information for png.h - this should match the version in png.c */ +#define PNG_LIBPNG_VER_STRING "1.6.47" +#define PNG_HEADER_VERSION_STRING " libpng version " PNG_LIBPNG_VER_STRING "\n" + +/* The versions of shared library builds should stay in sync, going forward */ +#define PNG_LIBPNG_VER_SHAREDLIB 16 +#define PNG_LIBPNG_VER_SONUM PNG_LIBPNG_VER_SHAREDLIB /* [Deprecated] */ +#define PNG_LIBPNG_VER_DLLNUM PNG_LIBPNG_VER_SHAREDLIB /* [Deprecated] */ + +/* These should match the first 3 components of PNG_LIBPNG_VER_STRING: */ +#define PNG_LIBPNG_VER_MAJOR 1 +#define PNG_LIBPNG_VER_MINOR 6 +#define PNG_LIBPNG_VER_RELEASE 47 + +/* This should be zero for a public release, or non-zero for a + * development version. + */ +#define PNG_LIBPNG_VER_BUILD 0 + +/* Release Status */ +#define PNG_LIBPNG_BUILD_ALPHA 1 +#define PNG_LIBPNG_BUILD_BETA 2 +#define PNG_LIBPNG_BUILD_RC 3 +#define PNG_LIBPNG_BUILD_STABLE 4 +#define PNG_LIBPNG_BUILD_RELEASE_STATUS_MASK 7 + +/* Release-Specific Flags */ +#define PNG_LIBPNG_BUILD_PATCH 8 /* Can be OR'ed with + PNG_LIBPNG_BUILD_STABLE only */ +#define PNG_LIBPNG_BUILD_PRIVATE 16 /* Cannot be OR'ed with + PNG_LIBPNG_BUILD_SPECIAL */ +#define PNG_LIBPNG_BUILD_SPECIAL 32 /* Cannot be OR'ed with + PNG_LIBPNG_BUILD_PRIVATE */ + +#define PNG_LIBPNG_BUILD_BASE_TYPE PNG_LIBPNG_BUILD_STABLE + +/* Careful here. At one time, Guy wanted to use 082, but that + * would be octal. We must not include leading zeros. + * Versions 0.7 through 1.0.0 were in the range 0 to 100 here + * (only version 1.0.0 was mis-numbered 100 instead of 10000). + * From version 1.0.1 it is: + * XXYYZZ, where XX=major, YY=minor, ZZ=release + */ +#define PNG_LIBPNG_VER 10647 /* 1.6.47 */ + +/* Library configuration: these options cannot be changed after + * the library has been built. + */ +#ifndef PNGLCONF_H +/* If pnglibconf.h is missing, you can + * copy scripts/pnglibconf.h.prebuilt to pnglibconf.h + */ +# include "pnglibconf.h" +#endif + +#ifndef PNG_VERSION_INFO_ONLY +/* Machine specific configuration. */ +# include "pngconf.h" +#endif + +/* + * Added at libpng-1.2.8 + * + * Ref MSDN: Private as priority over Special + * VS_FF_PRIVATEBUILD File *was not* built using standard release + * procedures. If this value is given, the StringFileInfo block must + * contain a PrivateBuild string. + * + * VS_FF_SPECIALBUILD File *was* built by the original company using + * standard release procedures but is a variation of the standard + * file of the same version number. If this value is given, the + * StringFileInfo block must contain a SpecialBuild string. + */ + +#ifdef PNG_USER_PRIVATEBUILD /* From pnglibconf.h */ +# define PNG_LIBPNG_BUILD_TYPE \ + (PNG_LIBPNG_BUILD_BASE_TYPE | PNG_LIBPNG_BUILD_PRIVATE) +#else +# ifdef PNG_LIBPNG_SPECIALBUILD +# define PNG_LIBPNG_BUILD_TYPE \ + (PNG_LIBPNG_BUILD_BASE_TYPE | PNG_LIBPNG_BUILD_SPECIAL) +# else +# define PNG_LIBPNG_BUILD_TYPE (PNG_LIBPNG_BUILD_BASE_TYPE) +# endif +#endif + +#ifndef PNG_VERSION_INFO_ONLY + +/* Inhibit C++ name-mangling for libpng functions but not for system calls. */ +#ifdef __cplusplus +extern "C" { +#endif /* __cplusplus */ + +/* Version information for C files, stored in png.c. This had better match + * the version above. + */ +#define png_libpng_ver png_get_header_ver(NULL) + +/* This file is arranged in several sections: + * + * 1. [omitted] + * 2. Any configuration options that can be specified by for the application + * code when it is built. (Build time configuration is in pnglibconf.h) + * 3. Type definitions (base types are defined in pngconf.h), structure + * definitions. + * 4. Exported library functions. + * 5. Simplified API. + * 6. Implementation options. + * + * The library source code has additional files (principally pngpriv.h) that + * allow configuration of the library. + */ + +/* Section 1: [omitted] */ + +/* Section 2: run time configuration + * See pnglibconf.h for build time configuration + * + * Run time configuration allows the application to choose between + * implementations of certain arithmetic APIs. The default is set + * at build time and recorded in pnglibconf.h, but it is safe to + * override these (and only these) settings. Note that this won't + * change what the library does, only application code, and the + * settings can (and probably should) be made on a per-file basis + * by setting the #defines before including png.h + * + * Use macros to read integers from PNG data or use the exported + * functions? + * PNG_USE_READ_MACROS: use the macros (see below) Note that + * the macros evaluate their argument multiple times. + * PNG_NO_USE_READ_MACROS: call the relevant library function. + * + * Use the alternative algorithm for compositing alpha samples that + * does not use division? + * PNG_READ_COMPOSITE_NODIV_SUPPORTED: use the 'no division' + * algorithm. + * PNG_NO_READ_COMPOSITE_NODIV: use the 'division' algorithm. + * + * How to handle benign errors if PNG_ALLOW_BENIGN_ERRORS is + * false? + * PNG_ALLOW_BENIGN_ERRORS: map calls to the benign error + * APIs to png_warning. + * Otherwise the calls are mapped to png_error. + */ + +/* Section 3: type definitions, including structures and compile time + * constants. + * See pngconf.h for base types that vary by machine/system + */ + +/* This triggers a compiler error in png.c, if png.c and png.h + * do not agree upon the version number. + */ +typedef char* png_libpng_version_1_6_47; + +/* Basic control structions. Read libpng-manual.txt or libpng.3 for more info. + * + * png_struct is the cache of information used while reading or writing a single + * PNG file. One of these is always required, although the simplified API + * (below) hides the creation and destruction of it. + */ +typedef struct png_struct_def png_struct; +typedef const png_struct * png_const_structp; +typedef png_struct * png_structp; +typedef png_struct * * png_structpp; + +/* png_info contains information read from or to be written to a PNG file. One + * or more of these must exist while reading or creating a PNG file. The + * information is not used by libpng during read but is used to control what + * gets written when a PNG file is created. "png_get_" function calls read + * information during read and "png_set_" functions calls write information + * when creating a PNG. + * been moved into a separate header file that is not accessible to + * applications. Read libpng-manual.txt or libpng.3 for more info. + */ +typedef struct png_info_def png_info; +typedef png_info * png_infop; +typedef const png_info * png_const_infop; +typedef png_info * * png_infopp; + +/* Types with names ending 'p' are pointer types. The corresponding types with + * names ending 'rp' are identical pointer types except that the pointer is + * marked 'restrict', which means that it is the only pointer to the object + * passed to the function. Applications should not use the 'restrict' types; + * it is always valid to pass 'p' to a pointer with a function argument of the + * corresponding 'rp' type. Different compilers have different rules with + * regard to type matching in the presence of 'restrict'. For backward + * compatibility libpng callbacks never have 'restrict' in their parameters and, + * consequentially, writing portable application code is extremely difficult if + * an attempt is made to use 'restrict'. + */ +typedef png_struct * PNG_RESTRICT png_structrp; +typedef const png_struct * PNG_RESTRICT png_const_structrp; +typedef png_info * PNG_RESTRICT png_inforp; +typedef const png_info * PNG_RESTRICT png_const_inforp; + +/* Three color definitions. The order of the red, green, and blue, (and the + * exact size) is not important, although the size of the fields need to + * be png_byte or png_uint_16 (as defined below). + */ +typedef struct png_color_struct +{ + png_byte red; + png_byte green; + png_byte blue; +} png_color; +typedef png_color * png_colorp; +typedef const png_color * png_const_colorp; +typedef png_color * * png_colorpp; + +typedef struct png_color_16_struct +{ + png_byte index; /* used for palette files */ + png_uint_16 red; /* for use in red green blue files */ + png_uint_16 green; + png_uint_16 blue; + png_uint_16 gray; /* for use in grayscale files */ +} png_color_16; +typedef png_color_16 * png_color_16p; +typedef const png_color_16 * png_const_color_16p; +typedef png_color_16 * * png_color_16pp; + +typedef struct png_color_8_struct +{ + png_byte red; /* for use in red green blue files */ + png_byte green; + png_byte blue; + png_byte gray; /* for use in grayscale files */ + png_byte alpha; /* for alpha channel files */ +} png_color_8; +typedef png_color_8 * png_color_8p; +typedef const png_color_8 * png_const_color_8p; +typedef png_color_8 * * png_color_8pp; + +/* + * The following two structures are used for the in-core representation + * of sPLT chunks. + */ +typedef struct png_sPLT_entry_struct +{ + png_uint_16 red; + png_uint_16 green; + png_uint_16 blue; + png_uint_16 alpha; + png_uint_16 frequency; +} png_sPLT_entry; +typedef png_sPLT_entry * png_sPLT_entryp; +typedef const png_sPLT_entry * png_const_sPLT_entryp; +typedef png_sPLT_entry * * png_sPLT_entrypp; + +/* When the depth of the sPLT palette is 8 bits, the color and alpha samples + * occupy the LSB of their respective members, and the MSB of each member + * is zero-filled. The frequency member always occupies the full 16 bits. + */ + +typedef struct png_sPLT_struct +{ + png_charp name; /* palette name */ + png_byte depth; /* depth of palette samples */ + png_sPLT_entryp entries; /* palette entries */ + png_int_32 nentries; /* number of palette entries */ +} png_sPLT_t; +typedef png_sPLT_t * png_sPLT_tp; +typedef const png_sPLT_t * png_const_sPLT_tp; +typedef png_sPLT_t * * png_sPLT_tpp; + +#ifdef PNG_TEXT_SUPPORTED +/* png_text holds the contents of a text/ztxt/itxt chunk in a PNG file, + * and whether that contents is compressed or not. The "key" field + * points to a regular zero-terminated C string. The "text" fields can be a + * regular C string, an empty string, or a NULL pointer. + * However, the structure returned by png_get_text() will always contain + * the "text" field as a regular zero-terminated C string (possibly + * empty), never a NULL pointer, so it can be safely used in printf() and + * other string-handling functions. Note that the "itxt_length", "lang", and + * "lang_key" members of the structure only exist when the library is built + * with iTXt chunk support. Prior to libpng-1.4.0 the library was built by + * default without iTXt support. Also note that when iTXt *is* supported, + * the "lang" and "lang_key" fields contain NULL pointers when the + * "compression" field contains * PNG_TEXT_COMPRESSION_NONE or + * PNG_TEXT_COMPRESSION_zTXt. Note that the "compression value" is not the + * same as what appears in the PNG tEXt/zTXt/iTXt chunk's "compression flag" + * which is always 0 or 1, or its "compression method" which is always 0. + */ +typedef struct png_text_struct +{ + int compression; /* compression value: + -1: tEXt, none + 0: zTXt, deflate + 1: iTXt, none + 2: iTXt, deflate */ + png_charp key; /* keyword, 1-79 character description of "text" */ + png_charp text; /* comment, may be an empty string (ie "") + or a NULL pointer */ + size_t text_length; /* length of the text string */ + size_t itxt_length; /* length of the itxt string */ + png_charp lang; /* language code, 0-79 characters + or a NULL pointer */ + png_charp lang_key; /* keyword translated UTF-8 string, 0 or more + chars or a NULL pointer */ +} png_text; +typedef png_text * png_textp; +typedef const png_text * png_const_textp; +typedef png_text * * png_textpp; +#endif + +/* Supported compression types for text in PNG files (tEXt, and zTXt). + * The values of the PNG_TEXT_COMPRESSION_ defines should NOT be changed. */ +#define PNG_TEXT_COMPRESSION_NONE_WR -3 +#define PNG_TEXT_COMPRESSION_zTXt_WR -2 +#define PNG_TEXT_COMPRESSION_NONE -1 +#define PNG_TEXT_COMPRESSION_zTXt 0 +#define PNG_ITXT_COMPRESSION_NONE 1 +#define PNG_ITXT_COMPRESSION_zTXt 2 +#define PNG_TEXT_COMPRESSION_LAST 3 /* Not a valid value */ + +/* png_time is a way to hold the time in an machine independent way. + * Two conversions are provided, both from time_t and struct tm. There + * is no portable way to convert to either of these structures, as far + * as I know. If you know of a portable way, send it to me. As a side + * note - PNG has always been Year 2000 compliant! + */ +typedef struct png_time_struct +{ + png_uint_16 year; /* full year, as in, 1995 */ + png_byte month; /* month of year, 1 - 12 */ + png_byte day; /* day of month, 1 - 31 */ + png_byte hour; /* hour of day, 0 - 23 */ + png_byte minute; /* minute of hour, 0 - 59 */ + png_byte second; /* second of minute, 0 - 60 (for leap seconds) */ +} png_time; +typedef png_time * png_timep; +typedef const png_time * png_const_timep; +typedef png_time * * png_timepp; + +#if defined(PNG_STORE_UNKNOWN_CHUNKS_SUPPORTED) ||\ + defined(PNG_USER_CHUNKS_SUPPORTED) +/* png_unknown_chunk is a structure to hold queued chunks for which there is + * no specific support. The idea is that we can use this to queue + * up private chunks for output even though the library doesn't actually + * know about their semantics. + * + * The data in the structure is set by libpng on read and used on write. + */ +typedef struct png_unknown_chunk_t +{ + png_byte name[5]; /* Textual chunk name with '\0' terminator */ + png_byte *data; /* Data, should not be modified on read! */ + size_t size; + + /* On write 'location' must be set using the flag values listed below. + * Notice that on read it is set by libpng however the values stored have + * more bits set than are listed below. Always treat the value as a + * bitmask. On write set only one bit - setting multiple bits may cause the + * chunk to be written in multiple places. + */ + png_byte location; /* mode of operation at read time */ +} +png_unknown_chunk; + +typedef png_unknown_chunk * png_unknown_chunkp; +typedef const png_unknown_chunk * png_const_unknown_chunkp; +typedef png_unknown_chunk * * png_unknown_chunkpp; +#endif + +/* Flag values for the unknown chunk location byte. */ +#define PNG_HAVE_IHDR 0x01 +#define PNG_HAVE_PLTE 0x02 +#define PNG_AFTER_IDAT 0x08 + +/* Maximum positive integer used in PNG is (2^31)-1 */ +#define PNG_UINT_31_MAX ((png_uint_32)0x7fffffffL) +#define PNG_UINT_32_MAX ((png_uint_32)(-1)) +#define PNG_SIZE_MAX ((size_t)(-1)) + +/* These are constants for fixed point values encoded in the + * PNG specification manner (x100000) + */ +#define PNG_FP_1 100000 +#define PNG_FP_HALF 50000 +#define PNG_FP_MAX ((png_fixed_point)0x7fffffffL) +#define PNG_FP_MIN (-PNG_FP_MAX) + +/* These describe the color_type field in png_info. */ +/* color type masks */ +#define PNG_COLOR_MASK_PALETTE 1 +#define PNG_COLOR_MASK_COLOR 2 +#define PNG_COLOR_MASK_ALPHA 4 + +/* color types. Note that not all combinations are legal */ +#define PNG_COLOR_TYPE_GRAY 0 +#define PNG_COLOR_TYPE_PALETTE (PNG_COLOR_MASK_COLOR | PNG_COLOR_MASK_PALETTE) +#define PNG_COLOR_TYPE_RGB (PNG_COLOR_MASK_COLOR) +#define PNG_COLOR_TYPE_RGB_ALPHA (PNG_COLOR_MASK_COLOR | PNG_COLOR_MASK_ALPHA) +#define PNG_COLOR_TYPE_GRAY_ALPHA (PNG_COLOR_MASK_ALPHA) +/* aliases */ +#define PNG_COLOR_TYPE_RGBA PNG_COLOR_TYPE_RGB_ALPHA +#define PNG_COLOR_TYPE_GA PNG_COLOR_TYPE_GRAY_ALPHA + +/* This is for compression type. PNG 1.0-1.2 only define the single type. */ +#define PNG_COMPRESSION_TYPE_BASE 0 /* Deflate method 8, 32K window */ +#define PNG_COMPRESSION_TYPE_DEFAULT PNG_COMPRESSION_TYPE_BASE + +/* This is for filter type. PNG 1.0-1.2 only define the single type. */ +#define PNG_FILTER_TYPE_BASE 0 /* Single row per-byte filtering */ +#define PNG_INTRAPIXEL_DIFFERENCING 64 /* Used only in MNG datastreams */ +#define PNG_FILTER_TYPE_DEFAULT PNG_FILTER_TYPE_BASE + +/* These are for the interlacing type. These values should NOT be changed. */ +#define PNG_INTERLACE_NONE 0 /* Non-interlaced image */ +#define PNG_INTERLACE_ADAM7 1 /* Adam7 interlacing */ +#define PNG_INTERLACE_LAST 2 /* Not a valid value */ + +/* These are for the oFFs chunk. These values should NOT be changed. */ +#define PNG_OFFSET_PIXEL 0 /* Offset in pixels */ +#define PNG_OFFSET_MICROMETER 1 /* Offset in micrometers (1/10^6 meter) */ +#define PNG_OFFSET_LAST 2 /* Not a valid value */ + +/* These are for the pCAL chunk. These values should NOT be changed. */ +#define PNG_EQUATION_LINEAR 0 /* Linear transformation */ +#define PNG_EQUATION_BASE_E 1 /* Exponential base e transform */ +#define PNG_EQUATION_ARBITRARY 2 /* Arbitrary base exponential transform */ +#define PNG_EQUATION_HYPERBOLIC 3 /* Hyperbolic sine transformation */ +#define PNG_EQUATION_LAST 4 /* Not a valid value */ + +/* These are for the sCAL chunk. These values should NOT be changed. */ +#define PNG_SCALE_UNKNOWN 0 /* unknown unit (image scale) */ +#define PNG_SCALE_METER 1 /* meters per pixel */ +#define PNG_SCALE_RADIAN 2 /* radians per pixel */ +#define PNG_SCALE_LAST 3 /* Not a valid value */ + +/* These are for the pHYs chunk. These values should NOT be changed. */ +#define PNG_RESOLUTION_UNKNOWN 0 /* pixels/unknown unit (aspect ratio) */ +#define PNG_RESOLUTION_METER 1 /* pixels/meter */ +#define PNG_RESOLUTION_LAST 2 /* Not a valid value */ + +/* These are for the sRGB chunk. These values should NOT be changed. */ +#define PNG_sRGB_INTENT_PERCEPTUAL 0 +#define PNG_sRGB_INTENT_RELATIVE 1 +#define PNG_sRGB_INTENT_SATURATION 2 +#define PNG_sRGB_INTENT_ABSOLUTE 3 +#define PNG_sRGB_INTENT_LAST 4 /* Not a valid value */ + +/* This is for text chunks */ +#define PNG_KEYWORD_MAX_LENGTH 79 + +/* Maximum number of entries in PLTE/sPLT/tRNS arrays */ +#define PNG_MAX_PALETTE_LENGTH 256 + +/* These determine if an ancillary chunk's data has been successfully read + * from the PNG header, or if the application has filled in the corresponding + * data in the info_struct to be written into the output file. The values + * of the PNG_INFO_ defines should NOT be changed. + */ +#define PNG_INFO_gAMA 0x0001U +#define PNG_INFO_sBIT 0x0002U +#define PNG_INFO_cHRM 0x0004U +#define PNG_INFO_PLTE 0x0008U +#define PNG_INFO_tRNS 0x0010U +#define PNG_INFO_bKGD 0x0020U +#define PNG_INFO_hIST 0x0040U +#define PNG_INFO_pHYs 0x0080U +#define PNG_INFO_oFFs 0x0100U +#define PNG_INFO_tIME 0x0200U +#define PNG_INFO_pCAL 0x0400U +#define PNG_INFO_sRGB 0x0800U /* GR-P, 0.96a */ +#define PNG_INFO_iCCP 0x1000U /* ESR, 1.0.6 */ +#define PNG_INFO_sPLT 0x2000U /* ESR, 1.0.6 */ +#define PNG_INFO_sCAL 0x4000U /* ESR, 1.0.6 */ +#define PNG_INFO_IDAT 0x8000U /* ESR, 1.0.6 */ +#define PNG_INFO_eXIf 0x10000U /* GR-P, 1.6.31 */ +#define PNG_INFO_cICP 0x20000U /* PNGv3: 1.6.45 */ +#define PNG_INFO_cLLI 0x40000U /* PNGv3: 1.6.45 */ +#define PNG_INFO_mDCV 0x80000U /* PNGv3: 1.6.45 */ +/* APNG: these chunks are stored as unknown, these flags are never set + * however they are provided as a convenience for implementors of APNG and + * avoids any merge conflicts. + * + * Private chunks: these chunk names violate the chunk name recommendations + * because the chunk definitions have no signature and because the private + * chunks with these names have been reserved. Private definitions should + * avoid them. + */ +#define PNG_INFO_acTL 0x100000U /* PNGv3: 1.6.45: unknown */ +#define PNG_INFO_fcTL 0x200000U /* PNGv3: 1.6.45: unknown */ +#define PNG_INFO_fdAT 0x400000U /* PNGv3: 1.6.45: unknown */ + +/* This is used for the transformation routines, as some of them + * change these values for the row. It also should enable using + * the routines for other purposes. + */ +typedef struct png_row_info_struct +{ + png_uint_32 width; /* width of row */ + size_t rowbytes; /* number of bytes in row */ + png_byte color_type; /* color type of row */ + png_byte bit_depth; /* bit depth of row */ + png_byte channels; /* number of channels (1, 2, 3, or 4) */ + png_byte pixel_depth; /* bits per pixel (depth * channels) */ +} png_row_info; + +typedef png_row_info * png_row_infop; +typedef png_row_info * * png_row_infopp; + +/* These are the function types for the I/O functions and for the functions + * that allow the user to override the default I/O functions with his or her + * own. The png_error_ptr type should match that of user-supplied warning + * and error functions, while the png_rw_ptr type should match that of the + * user read/write data functions. Note that the 'write' function must not + * modify the buffer it is passed. The 'read' function, on the other hand, is + * expected to return the read data in the buffer. + */ +typedef PNG_CALLBACK(void, *png_error_ptr, (png_structp, png_const_charp)); +typedef PNG_CALLBACK(void, *png_rw_ptr, (png_structp, png_bytep, size_t)); +typedef PNG_CALLBACK(void, *png_flush_ptr, (png_structp)); +typedef PNG_CALLBACK(void, *png_read_status_ptr, (png_structp, png_uint_32, + int)); +typedef PNG_CALLBACK(void, *png_write_status_ptr, (png_structp, png_uint_32, + int)); + +#ifdef PNG_PROGRESSIVE_READ_SUPPORTED +typedef PNG_CALLBACK(void, *png_progressive_info_ptr, (png_structp, png_infop)); +typedef PNG_CALLBACK(void, *png_progressive_end_ptr, (png_structp, png_infop)); + +/* The following callback receives png_uint_32 row_number, int pass for the + * png_bytep data of the row. When transforming an interlaced image the + * row number is the row number within the sub-image of the interlace pass, so + * the value will increase to the height of the sub-image (not the full image) + * then reset to 0 for the next pass. + * + * Use PNG_ROW_FROM_PASS_ROW(row, pass) and PNG_COL_FROM_PASS_COL(col, pass) to + * find the output pixel (x,y) given an interlaced sub-image pixel + * (row,col,pass). (See below for these macros.) + */ +typedef PNG_CALLBACK(void, *png_progressive_row_ptr, (png_structp, png_bytep, + png_uint_32, int)); +#endif + +#if defined(PNG_READ_USER_TRANSFORM_SUPPORTED) || \ + defined(PNG_WRITE_USER_TRANSFORM_SUPPORTED) +typedef PNG_CALLBACK(void, *png_user_transform_ptr, (png_structp, png_row_infop, + png_bytep)); +#endif + +#ifdef PNG_USER_CHUNKS_SUPPORTED +typedef PNG_CALLBACK(int, *png_user_chunk_ptr, (png_structp, + png_unknown_chunkp)); +#endif +#ifdef PNG_UNKNOWN_CHUNKS_SUPPORTED +/* not used anywhere */ +/* typedef PNG_CALLBACK(void, *png_unknown_chunk_ptr, (png_structp)); */ +#endif + +#ifdef PNG_SETJMP_SUPPORTED +/* This must match the function definition in , and the application + * must include this before png.h to obtain the definition of jmp_buf. The + * function is required to be PNG_NORETURN, but this is not checked. If the + * function does return the application will crash via an abort() or similar + * system level call. + * + * If you get a warning here while building the library you may need to make + * changes to ensure that pnglibconf.h records the calling convention used by + * your compiler. This may be very difficult - try using a different compiler + * to build the library! + */ +PNG_FUNCTION(void, (PNGCAPI *png_longjmp_ptr), (jmp_buf, int), typedef); +#endif + +/* Transform masks for the high-level interface */ +#define PNG_TRANSFORM_IDENTITY 0x0000 /* read and write */ +#define PNG_TRANSFORM_STRIP_16 0x0001 /* read only */ +#define PNG_TRANSFORM_STRIP_ALPHA 0x0002 /* read only */ +#define PNG_TRANSFORM_PACKING 0x0004 /* read and write */ +#define PNG_TRANSFORM_PACKSWAP 0x0008 /* read and write */ +#define PNG_TRANSFORM_EXPAND 0x0010 /* read only */ +#define PNG_TRANSFORM_INVERT_MONO 0x0020 /* read and write */ +#define PNG_TRANSFORM_SHIFT 0x0040 /* read and write */ +#define PNG_TRANSFORM_BGR 0x0080 /* read and write */ +#define PNG_TRANSFORM_SWAP_ALPHA 0x0100 /* read and write */ +#define PNG_TRANSFORM_SWAP_ENDIAN 0x0200 /* read and write */ +#define PNG_TRANSFORM_INVERT_ALPHA 0x0400 /* read and write */ +#define PNG_TRANSFORM_STRIP_FILLER 0x0800 /* write only */ +/* Added to libpng-1.2.34 */ +#define PNG_TRANSFORM_STRIP_FILLER_BEFORE PNG_TRANSFORM_STRIP_FILLER +#define PNG_TRANSFORM_STRIP_FILLER_AFTER 0x1000 /* write only */ +/* Added to libpng-1.4.0 */ +#define PNG_TRANSFORM_GRAY_TO_RGB 0x2000 /* read only */ +/* Added to libpng-1.5.4 */ +#define PNG_TRANSFORM_EXPAND_16 0x4000 /* read only */ +#if ~0U > 0xffffU /* or else this might break on a 16-bit machine */ +#define PNG_TRANSFORM_SCALE_16 0x8000 /* read only */ +#endif + +/* Flags for MNG supported features */ +#define PNG_FLAG_MNG_EMPTY_PLTE 0x01 +#define PNG_FLAG_MNG_FILTER_64 0x04 +#define PNG_ALL_MNG_FEATURES 0x05 + +/* NOTE: prior to 1.5 these functions had no 'API' style declaration, + * this allowed the zlib default functions to be used on Windows + * platforms. In 1.5 the zlib default malloc (which just calls malloc and + * ignores the first argument) should be completely compatible with the + * following. + */ +typedef PNG_CALLBACK(png_voidp, *png_malloc_ptr, (png_structp, + png_alloc_size_t)); +typedef PNG_CALLBACK(void, *png_free_ptr, (png_structp, png_voidp)); + +/* Section 4: exported functions + * Here are the function definitions most commonly used. This is not + * the place to find out how to use libpng. See libpng-manual.txt for the + * full explanation, see example.c for the summary. This just provides + * a simple one line description of the use of each function. + * + * The PNG_EXPORT() and PNG_EXPORTA() macros used below are defined in + * pngconf.h and in the *.dfn files in the scripts directory. + * + * PNG_EXPORT(ordinal, type, name, (args)); + * + * ordinal: ordinal that is used while building + * *.def files. The ordinal value is only + * relevant when preprocessing png.h with + * the *.dfn files for building symbol table + * entries, and are removed by pngconf.h. + * type: return type of the function + * name: function name + * args: function arguments, with types + * + * When we wish to append attributes to a function prototype we use + * the PNG_EXPORTA() macro instead. + * + * PNG_EXPORTA(ordinal, type, name, (args), attributes); + * + * ordinal, type, name, and args: same as in PNG_EXPORT(). + * attributes: function attributes + */ + +/* Returns the version number of the library */ +PNG_EXPORT(1, png_uint_32, png_access_version_number, (void)); + +/* Tell lib we have already handled the first magic bytes. + * Handling more than 8 bytes from the beginning of the file is an error. + */ +PNG_EXPORT(2, void, png_set_sig_bytes, (png_structrp png_ptr, int num_bytes)); + +/* Check sig[start] through sig[start + num_to_check - 1] to see if it's a + * PNG file. Returns zero if the supplied bytes match the 8-byte PNG + * signature, and non-zero otherwise. Having num_to_check == 0 or + * start > 7 will always fail (i.e. return non-zero). + */ +PNG_EXPORT(3, int, png_sig_cmp, (png_const_bytep sig, size_t start, + size_t num_to_check)); + +/* Simple signature checking function. This is the same as calling + * png_check_sig(sig, n) := (png_sig_cmp(sig, 0, n) == 0). + */ +#define png_check_sig(sig, n) (png_sig_cmp((sig), 0, (n)) == 0) /* DEPRECATED */ + +/* Allocate and initialize png_ptr struct for reading, and any other memory. */ +PNG_EXPORTA(4, png_structp, png_create_read_struct, + (png_const_charp user_png_ver, png_voidp error_ptr, + png_error_ptr error_fn, png_error_ptr warn_fn), + PNG_ALLOCATED); + +/* Allocate and initialize png_ptr struct for writing, and any other memory */ +PNG_EXPORTA(5, png_structp, png_create_write_struct, + (png_const_charp user_png_ver, png_voidp error_ptr, png_error_ptr error_fn, + png_error_ptr warn_fn), + PNG_ALLOCATED); + +PNG_EXPORT(6, size_t, png_get_compression_buffer_size, + (png_const_structrp png_ptr)); + +PNG_EXPORT(7, void, png_set_compression_buffer_size, (png_structrp png_ptr, + size_t size)); + +/* Moved from pngconf.h in 1.4.0 and modified to ensure setjmp/longjmp + * match up. + */ +#ifdef PNG_SETJMP_SUPPORTED +/* This function returns the jmp_buf built in to *png_ptr. It must be + * supplied with an appropriate 'longjmp' function to use on that jmp_buf + * unless the default error function is overridden in which case NULL is + * acceptable. The size of the jmp_buf is checked against the actual size + * allocated by the library - the call will return NULL on a mismatch + * indicating an ABI mismatch. + */ +PNG_EXPORT(8, jmp_buf*, png_set_longjmp_fn, (png_structrp png_ptr, + png_longjmp_ptr longjmp_fn, size_t jmp_buf_size)); +# define png_jmpbuf(png_ptr) \ + (*png_set_longjmp_fn((png_ptr), longjmp, (sizeof (jmp_buf)))) +#else +# define png_jmpbuf(png_ptr) \ + (LIBPNG_WAS_COMPILED_WITH__PNG_NO_SETJMP) +#endif +/* This function should be used by libpng applications in place of + * longjmp(png_ptr->jmpbuf, val). If longjmp_fn() has been set, it + * will use it; otherwise it will call PNG_ABORT(). This function was + * added in libpng-1.5.0. + */ +PNG_EXPORTA(9, void, png_longjmp, (png_const_structrp png_ptr, int val), + PNG_NORETURN); + +#ifdef PNG_READ_SUPPORTED +/* Reset the compression stream */ +PNG_EXPORTA(10, int, png_reset_zstream, (png_structrp png_ptr), PNG_DEPRECATED); +#endif + +/* New functions added in libpng-1.0.2 (not enabled by default until 1.2.0) */ +#ifdef PNG_USER_MEM_SUPPORTED +PNG_EXPORTA(11, png_structp, png_create_read_struct_2, + (png_const_charp user_png_ver, png_voidp error_ptr, png_error_ptr error_fn, + png_error_ptr warn_fn, + png_voidp mem_ptr, png_malloc_ptr malloc_fn, png_free_ptr free_fn), + PNG_ALLOCATED); +PNG_EXPORTA(12, png_structp, png_create_write_struct_2, + (png_const_charp user_png_ver, png_voidp error_ptr, png_error_ptr error_fn, + png_error_ptr warn_fn, + png_voidp mem_ptr, png_malloc_ptr malloc_fn, png_free_ptr free_fn), + PNG_ALLOCATED); +#endif + +/* Write the PNG file signature. */ +PNG_EXPORT(13, void, png_write_sig, (png_structrp png_ptr)); + +/* Write a PNG chunk - size, type, (optional) data, CRC. */ +PNG_EXPORT(14, void, png_write_chunk, (png_structrp png_ptr, png_const_bytep + chunk_name, png_const_bytep data, size_t length)); + +/* Write the start of a PNG chunk - length and chunk name. */ +PNG_EXPORT(15, void, png_write_chunk_start, (png_structrp png_ptr, + png_const_bytep chunk_name, png_uint_32 length)); + +/* Write the data of a PNG chunk started with png_write_chunk_start(). */ +PNG_EXPORT(16, void, png_write_chunk_data, (png_structrp png_ptr, + png_const_bytep data, size_t length)); + +/* Finish a chunk started with png_write_chunk_start() (includes CRC). */ +PNG_EXPORT(17, void, png_write_chunk_end, (png_structrp png_ptr)); + +/* Allocate and initialize the info structure */ +PNG_EXPORTA(18, png_infop, png_create_info_struct, (png_const_structrp png_ptr), + PNG_ALLOCATED); + +/* DEPRECATED: this function allowed init structures to be created using the + * default allocation method (typically malloc). Use is deprecated in 1.6.0 and + * the API will be removed in the future. + */ +PNG_EXPORTA(19, void, png_info_init_3, (png_infopp info_ptr, + size_t png_info_struct_size), PNG_DEPRECATED); + +/* Writes all the PNG information before the image. */ +PNG_EXPORT(20, void, png_write_info_before_PLTE, + (png_structrp png_ptr, png_const_inforp info_ptr)); +PNG_EXPORT(21, void, png_write_info, + (png_structrp png_ptr, png_const_inforp info_ptr)); + +#ifdef PNG_SEQUENTIAL_READ_SUPPORTED +/* Read the information before the actual image data. */ +PNG_EXPORT(22, void, png_read_info, + (png_structrp png_ptr, png_inforp info_ptr)); +#endif + +#ifdef PNG_TIME_RFC1123_SUPPORTED + /* Convert to a US string format: there is no localization support in this + * routine. The original implementation used a 29 character buffer in + * png_struct, this will be removed in future versions. + */ +#if PNG_LIBPNG_VER < 10700 +/* To do: remove this from libpng17 (and from libpng17/png.c and pngstruct.h) */ +PNG_EXPORTA(23, png_const_charp, png_convert_to_rfc1123, (png_structrp png_ptr, + png_const_timep ptime),PNG_DEPRECATED); +#endif +PNG_EXPORT(241, int, png_convert_to_rfc1123_buffer, (char out[29], + png_const_timep ptime)); +#endif + +#ifdef PNG_CONVERT_tIME_SUPPORTED +/* Convert from a struct tm to png_time */ +PNG_EXPORT(24, void, png_convert_from_struct_tm, (png_timep ptime, + const struct tm * ttime)); + +/* Convert from time_t to png_time. Uses gmtime() */ +PNG_EXPORT(25, void, png_convert_from_time_t, (png_timep ptime, time_t ttime)); +#endif /* CONVERT_tIME */ + +#ifdef PNG_READ_EXPAND_SUPPORTED +/* Expand data to 24-bit RGB, or 8-bit grayscale, with alpha if available. */ +PNG_EXPORT(26, void, png_set_expand, (png_structrp png_ptr)); +PNG_EXPORT(27, void, png_set_expand_gray_1_2_4_to_8, (png_structrp png_ptr)); +PNG_EXPORT(28, void, png_set_palette_to_rgb, (png_structrp png_ptr)); +PNG_EXPORT(29, void, png_set_tRNS_to_alpha, (png_structrp png_ptr)); +#endif + +#ifdef PNG_READ_EXPAND_16_SUPPORTED +/* Expand to 16-bit channels, forces conversion of palette to RGB and expansion + * of a tRNS chunk if present. + */ +PNG_EXPORT(221, void, png_set_expand_16, (png_structrp png_ptr)); +#endif + +#if defined(PNG_READ_BGR_SUPPORTED) || defined(PNG_WRITE_BGR_SUPPORTED) +/* Use blue, green, red order for pixels. */ +PNG_EXPORT(30, void, png_set_bgr, (png_structrp png_ptr)); +#endif + +#ifdef PNG_READ_GRAY_TO_RGB_SUPPORTED +/* Expand the grayscale to 24-bit RGB if necessary. */ +PNG_EXPORT(31, void, png_set_gray_to_rgb, (png_structrp png_ptr)); +#endif + +#ifdef PNG_READ_RGB_TO_GRAY_SUPPORTED +/* Reduce RGB to grayscale. */ +#define PNG_ERROR_ACTION_NONE 1 +#define PNG_ERROR_ACTION_WARN 2 +#define PNG_ERROR_ACTION_ERROR 3 +#define PNG_RGB_TO_GRAY_DEFAULT (-1)/*for red/green coefficients*/ + +PNG_FP_EXPORT(32, void, png_set_rgb_to_gray, (png_structrp png_ptr, + int error_action, double red, double green)) +PNG_FIXED_EXPORT(33, void, png_set_rgb_to_gray_fixed, (png_structrp png_ptr, + int error_action, png_fixed_point red, png_fixed_point green)) + +PNG_EXPORT(34, png_byte, png_get_rgb_to_gray_status, (png_const_structrp + png_ptr)); +#endif + +#ifdef PNG_BUILD_GRAYSCALE_PALETTE_SUPPORTED +PNG_EXPORT(35, void, png_build_grayscale_palette, (int bit_depth, + png_colorp palette)); +#endif + +#ifdef PNG_READ_ALPHA_MODE_SUPPORTED +/* How the alpha channel is interpreted - this affects how the color channels + * of a PNG file are returned to the calling application when an alpha channel, + * or a tRNS chunk in a palette file, is present. + * + * This has no effect on the way pixels are written into a PNG output + * datastream. The color samples in a PNG datastream are never premultiplied + * with the alpha samples. + * + * The default is to return data according to the PNG specification: the alpha + * channel is a linear measure of the contribution of the pixel to the + * corresponding composited pixel, and the color channels are unassociated + * (not premultiplied). The gamma encoded color channels must be scaled + * according to the contribution and to do this it is necessary to undo + * the encoding, scale the color values, perform the composition and re-encode + * the values. This is the 'PNG' mode. + * + * The alternative is to 'associate' the alpha with the color information by + * storing color channel values that have been scaled by the alpha. + * image. These are the 'STANDARD', 'ASSOCIATED' or 'PREMULTIPLIED' modes + * (the latter being the two common names for associated alpha color channels). + * + * For the 'OPTIMIZED' mode, a pixel is treated as opaque only if the alpha + * value is equal to the maximum value. + * + * The final choice is to gamma encode the alpha channel as well. This is + * broken because, in practice, no implementation that uses this choice + * correctly undoes the encoding before handling alpha composition. Use this + * choice only if other serious errors in the software or hardware you use + * mandate it; the typical serious error is for dark halos to appear around + * opaque areas of the composited PNG image because of arithmetic overflow. + * + * The API function png_set_alpha_mode specifies which of these choices to use + * with an enumerated 'mode' value and the gamma of the required output: + */ +#define PNG_ALPHA_PNG 0 /* according to the PNG standard */ +#define PNG_ALPHA_STANDARD 1 /* according to Porter/Duff */ +#define PNG_ALPHA_ASSOCIATED 1 /* as above; this is the normal practice */ +#define PNG_ALPHA_PREMULTIPLIED 1 /* as above */ +#define PNG_ALPHA_OPTIMIZED 2 /* 'PNG' for opaque pixels, else 'STANDARD' */ +#define PNG_ALPHA_BROKEN 3 /* the alpha channel is gamma encoded */ + +PNG_FP_EXPORT(227, void, png_set_alpha_mode, (png_structrp png_ptr, int mode, + double output_gamma)) +PNG_FIXED_EXPORT(228, void, png_set_alpha_mode_fixed, (png_structrp png_ptr, + int mode, png_fixed_point output_gamma)) +#endif + +#if defined(PNG_GAMMA_SUPPORTED) || defined(PNG_READ_ALPHA_MODE_SUPPORTED) +/* The output_gamma value is a screen gamma in libpng terminology: it expresses + * how to decode the output values, not how they are encoded. + */ +#define PNG_DEFAULT_sRGB -1 /* sRGB gamma and color space */ +#define PNG_GAMMA_MAC_18 -2 /* Old Mac '1.8' gamma and color space */ +#define PNG_GAMMA_sRGB 220000 /* Television standards--matches sRGB gamma */ +#define PNG_GAMMA_LINEAR PNG_FP_1 /* Linear */ +#endif + +/* The following are examples of calls to png_set_alpha_mode to achieve the + * required overall gamma correction and, where necessary, alpha + * premultiplication. + * + * png_set_alpha_mode(pp, PNG_ALPHA_PNG, PNG_DEFAULT_sRGB); + * This is the default libpng handling of the alpha channel - it is not + * pre-multiplied into the color components. In addition the call states + * that the output is for a sRGB system and causes all PNG files without gAMA + * chunks to be assumed to be encoded using sRGB. + * + * png_set_alpha_mode(pp, PNG_ALPHA_PNG, PNG_GAMMA_MAC); + * In this case the output is assumed to be something like an sRGB conformant + * display preceded by a power-law lookup table of power 1.45. This is how + * early Mac systems behaved. + * + * png_set_alpha_mode(pp, PNG_ALPHA_STANDARD, PNG_GAMMA_LINEAR); + * This is the classic Jim Blinn approach and will work in academic + * environments where everything is done by the book. It has the shortcoming + * of assuming that input PNG data with no gamma information is linear - this + * is unlikely to be correct unless the PNG files where generated locally. + * Most of the time the output precision will be so low as to show + * significant banding in dark areas of the image. + * + * png_set_expand_16(pp); + * png_set_alpha_mode(pp, PNG_ALPHA_STANDARD, PNG_DEFAULT_sRGB); + * This is a somewhat more realistic Jim Blinn inspired approach. PNG files + * are assumed to have the sRGB encoding if not marked with a gamma value and + * the output is always 16 bits per component. This permits accurate scaling + * and processing of the data. If you know that your input PNG files were + * generated locally you might need to replace PNG_DEFAULT_sRGB with the + * correct value for your system. + * + * png_set_alpha_mode(pp, PNG_ALPHA_OPTIMIZED, PNG_DEFAULT_sRGB); + * If you just need to composite the PNG image onto an existing background + * and if you control the code that does this you can use the optimization + * setting. In this case you just copy completely opaque pixels to the + * output. For pixels that are not completely transparent (you just skip + * those) you do the composition math using png_composite or png_composite_16 + * below then encode the resultant 8-bit or 16-bit values to match the output + * encoding. + * + * Other cases + * If neither the PNG nor the standard linear encoding work for you because + * of the software or hardware you use then you have a big problem. The PNG + * case will probably result in halos around the image. The linear encoding + * will probably result in a washed out, too bright, image (it's actually too + * contrasty.) Try the ALPHA_OPTIMIZED mode above - this will probably + * substantially reduce the halos. Alternatively try: + * + * png_set_alpha_mode(pp, PNG_ALPHA_BROKEN, PNG_DEFAULT_sRGB); + * This option will also reduce the halos, but there will be slight dark + * halos round the opaque parts of the image where the background is light. + * In the OPTIMIZED mode the halos will be light halos where the background + * is dark. Take your pick - the halos are unavoidable unless you can get + * your hardware/software fixed! (The OPTIMIZED approach is slightly + * faster.) + * + * When the default gamma of PNG files doesn't match the output gamma. + * If you have PNG files with no gamma information png_set_alpha_mode allows + * you to provide a default gamma, but it also sets the output gamma to the + * matching value. If you know your PNG files have a gamma that doesn't + * match the output you can take advantage of the fact that + * png_set_alpha_mode always sets the output gamma but only sets the PNG + * default if it is not already set: + * + * png_set_alpha_mode(pp, PNG_ALPHA_PNG, PNG_DEFAULT_sRGB); + * png_set_alpha_mode(pp, PNG_ALPHA_PNG, PNG_GAMMA_MAC); + * The first call sets both the default and the output gamma values, the + * second call overrides the output gamma without changing the default. This + * is easier than achieving the same effect with png_set_gamma. You must use + * PNG_ALPHA_PNG for the first call - internal checking in png_set_alpha will + * fire if more than one call to png_set_alpha_mode and png_set_background is + * made in the same read operation, however multiple calls with PNG_ALPHA_PNG + * are ignored. + */ + +#ifdef PNG_READ_STRIP_ALPHA_SUPPORTED +PNG_EXPORT(36, void, png_set_strip_alpha, (png_structrp png_ptr)); +#endif + +#if defined(PNG_READ_SWAP_ALPHA_SUPPORTED) || \ + defined(PNG_WRITE_SWAP_ALPHA_SUPPORTED) +PNG_EXPORT(37, void, png_set_swap_alpha, (png_structrp png_ptr)); +#endif + +#if defined(PNG_READ_INVERT_ALPHA_SUPPORTED) || \ + defined(PNG_WRITE_INVERT_ALPHA_SUPPORTED) +PNG_EXPORT(38, void, png_set_invert_alpha, (png_structrp png_ptr)); +#endif + +#if defined(PNG_READ_FILLER_SUPPORTED) || defined(PNG_WRITE_FILLER_SUPPORTED) +/* Add a filler byte to 8-bit or 16-bit Gray or 24-bit or 48-bit RGB images. */ +PNG_EXPORT(39, void, png_set_filler, (png_structrp png_ptr, png_uint_32 filler, + int flags)); +/* The values of the PNG_FILLER_ defines should NOT be changed */ +# define PNG_FILLER_BEFORE 0 +# define PNG_FILLER_AFTER 1 +/* Add an alpha byte to 8-bit or 16-bit Gray or 24-bit or 48-bit RGB images. */ +PNG_EXPORT(40, void, png_set_add_alpha, (png_structrp png_ptr, + png_uint_32 filler, int flags)); +#endif /* READ_FILLER || WRITE_FILLER */ + +#if defined(PNG_READ_SWAP_SUPPORTED) || defined(PNG_WRITE_SWAP_SUPPORTED) +/* Swap bytes in 16-bit depth files. */ +PNG_EXPORT(41, void, png_set_swap, (png_structrp png_ptr)); +#endif + +#if defined(PNG_READ_PACK_SUPPORTED) || defined(PNG_WRITE_PACK_SUPPORTED) +/* Use 1 byte per pixel in 1, 2, or 4-bit depth files. */ +PNG_EXPORT(42, void, png_set_packing, (png_structrp png_ptr)); +#endif + +#if defined(PNG_READ_PACKSWAP_SUPPORTED) || \ + defined(PNG_WRITE_PACKSWAP_SUPPORTED) +/* Swap packing order of pixels in bytes. */ +PNG_EXPORT(43, void, png_set_packswap, (png_structrp png_ptr)); +#endif + +#if defined(PNG_READ_SHIFT_SUPPORTED) || defined(PNG_WRITE_SHIFT_SUPPORTED) +/* Converts files to legal bit depths. */ +PNG_EXPORT(44, void, png_set_shift, (png_structrp png_ptr, png_const_color_8p + true_bits)); +#endif + +#if defined(PNG_READ_INTERLACING_SUPPORTED) || \ + defined(PNG_WRITE_INTERLACING_SUPPORTED) +/* Have the code handle the interlacing. Returns the number of passes. + * MUST be called before png_read_update_info or png_start_read_image, + * otherwise it will not have the desired effect. Note that it is still + * necessary to call png_read_row or png_read_rows png_get_image_height + * times for each pass. +*/ +PNG_EXPORT(45, int, png_set_interlace_handling, (png_structrp png_ptr)); +#endif + +#if defined(PNG_READ_INVERT_SUPPORTED) || defined(PNG_WRITE_INVERT_SUPPORTED) +/* Invert monochrome files */ +PNG_EXPORT(46, void, png_set_invert_mono, (png_structrp png_ptr)); +#endif + +#ifdef PNG_READ_BACKGROUND_SUPPORTED +/* Handle alpha and tRNS by replacing with a background color. Prior to + * libpng-1.5.4 this API must not be called before the PNG file header has been + * read. Doing so will result in unexpected behavior and possible warnings or + * errors if the PNG file contains a bKGD chunk. + */ +PNG_FP_EXPORT(47, void, png_set_background, (png_structrp png_ptr, + png_const_color_16p background_color, int background_gamma_code, + int need_expand, double background_gamma)) +PNG_FIXED_EXPORT(215, void, png_set_background_fixed, (png_structrp png_ptr, + png_const_color_16p background_color, int background_gamma_code, + int need_expand, png_fixed_point background_gamma)) +#endif +#ifdef PNG_READ_BACKGROUND_SUPPORTED +# define PNG_BACKGROUND_GAMMA_UNKNOWN 0 +# define PNG_BACKGROUND_GAMMA_SCREEN 1 +# define PNG_BACKGROUND_GAMMA_FILE 2 +# define PNG_BACKGROUND_GAMMA_UNIQUE 3 +#endif + +#ifdef PNG_READ_SCALE_16_TO_8_SUPPORTED +/* Scale a 16-bit depth file down to 8-bit, accurately. */ +PNG_EXPORT(229, void, png_set_scale_16, (png_structrp png_ptr)); +#endif + +#ifdef PNG_READ_STRIP_16_TO_8_SUPPORTED +#define PNG_READ_16_TO_8_SUPPORTED /* Name prior to 1.5.4 */ +/* Strip the second byte of information from a 16-bit depth file. */ +PNG_EXPORT(48, void, png_set_strip_16, (png_structrp png_ptr)); +#endif + +#ifdef PNG_READ_QUANTIZE_SUPPORTED +/* Turn on quantizing, and reduce the palette to the number of colors + * available. + */ +PNG_EXPORT(49, void, png_set_quantize, (png_structrp png_ptr, + png_colorp palette, int num_palette, int maximum_colors, + png_const_uint_16p histogram, int full_quantize)); +#endif + +#ifdef PNG_READ_GAMMA_SUPPORTED +/* The threshold on gamma processing is configurable but hard-wired into the + * library. The following is the floating point variant. + */ +#define PNG_GAMMA_THRESHOLD (PNG_GAMMA_THRESHOLD_FIXED*.00001) + +/* Handle gamma correction. Screen_gamma=(display_exponent). + * NOTE: this API simply sets the screen and file gamma values. It will + * therefore override the value for gamma in a PNG file if it is called after + * the file header has been read - use with care - call before reading the PNG + * file for best results! + * + * These routines accept the same gamma values as png_set_alpha_mode (described + * above). The PNG_GAMMA_ defines and PNG_DEFAULT_sRGB can be passed to either + * API (floating point or fixed.) Notice, however, that the 'file_gamma' value + * is the inverse of a 'screen gamma' value. + */ +PNG_FP_EXPORT(50, void, png_set_gamma, (png_structrp png_ptr, + double screen_gamma, double override_file_gamma)) +PNG_FIXED_EXPORT(208, void, png_set_gamma_fixed, (png_structrp png_ptr, + png_fixed_point screen_gamma, png_fixed_point override_file_gamma)) +#endif + +#ifdef PNG_WRITE_FLUSH_SUPPORTED +/* Set how many lines between output flushes - 0 for no flushing */ +PNG_EXPORT(51, void, png_set_flush, (png_structrp png_ptr, int nrows)); +/* Flush the current PNG output buffer */ +PNG_EXPORT(52, void, png_write_flush, (png_structrp png_ptr)); +#endif + +/* Optional update palette with requested transformations */ +PNG_EXPORT(53, void, png_start_read_image, (png_structrp png_ptr)); + +/* Optional call to update the users info structure */ +PNG_EXPORT(54, void, png_read_update_info, (png_structrp png_ptr, + png_inforp info_ptr)); + +#ifdef PNG_SEQUENTIAL_READ_SUPPORTED +/* Read one or more rows of image data. */ +PNG_EXPORT(55, void, png_read_rows, (png_structrp png_ptr, png_bytepp row, + png_bytepp display_row, png_uint_32 num_rows)); +#endif + +#ifdef PNG_SEQUENTIAL_READ_SUPPORTED +/* Read a row of data. */ +PNG_EXPORT(56, void, png_read_row, (png_structrp png_ptr, png_bytep row, + png_bytep display_row)); +#endif + +#ifdef PNG_SEQUENTIAL_READ_SUPPORTED +/* Read the whole image into memory at once. */ +PNG_EXPORT(57, void, png_read_image, (png_structrp png_ptr, png_bytepp image)); +#endif + +/* Write a row of image data */ +PNG_EXPORT(58, void, png_write_row, (png_structrp png_ptr, + png_const_bytep row)); + +/* Write a few rows of image data: (*row) is not written; however, the type + * is declared as writeable to maintain compatibility with previous versions + * of libpng and to allow the 'display_row' array from read_rows to be passed + * unchanged to write_rows. + */ +PNG_EXPORT(59, void, png_write_rows, (png_structrp png_ptr, png_bytepp row, + png_uint_32 num_rows)); + +/* Write the image data */ +PNG_EXPORT(60, void, png_write_image, (png_structrp png_ptr, png_bytepp image)); + +/* Write the end of the PNG file. */ +PNG_EXPORT(61, void, png_write_end, (png_structrp png_ptr, + png_inforp info_ptr)); + +#ifdef PNG_SEQUENTIAL_READ_SUPPORTED +/* Read the end of the PNG file. */ +PNG_EXPORT(62, void, png_read_end, (png_structrp png_ptr, png_inforp info_ptr)); +#endif + +/* Free any memory associated with the png_info_struct */ +PNG_EXPORT(63, void, png_destroy_info_struct, (png_const_structrp png_ptr, + png_infopp info_ptr_ptr)); + +/* Free any memory associated with the png_struct and the png_info_structs */ +PNG_EXPORT(64, void, png_destroy_read_struct, (png_structpp png_ptr_ptr, + png_infopp info_ptr_ptr, png_infopp end_info_ptr_ptr)); + +/* Free any memory associated with the png_struct and the png_info_structs */ +PNG_EXPORT(65, void, png_destroy_write_struct, (png_structpp png_ptr_ptr, + png_infopp info_ptr_ptr)); + +/* Set the libpng method of handling chunk CRC errors */ +PNG_EXPORT(66, void, png_set_crc_action, (png_structrp png_ptr, int crit_action, + int ancil_action)); + +/* Values for png_set_crc_action() say how to handle CRC errors in + * ancillary and critical chunks, and whether to use the data contained + * therein. Note that it is impossible to "discard" data in a critical + * chunk. For versions prior to 0.90, the action was always error/quit, + * whereas in version 0.90 and later, the action for CRC errors in ancillary + * chunks is warn/discard. These values should NOT be changed. + * + * value action:critical action:ancillary + */ +#define PNG_CRC_DEFAULT 0 /* error/quit warn/discard data */ +#define PNG_CRC_ERROR_QUIT 1 /* error/quit error/quit */ +#define PNG_CRC_WARN_DISCARD 2 /* (INVALID) warn/discard data */ +#define PNG_CRC_WARN_USE 3 /* warn/use data warn/use data */ +#define PNG_CRC_QUIET_USE 4 /* quiet/use data quiet/use data */ +#define PNG_CRC_NO_CHANGE 5 /* use current value use current value */ + +#ifdef PNG_WRITE_SUPPORTED +/* These functions give the user control over the scan-line filtering in + * libpng and the compression methods used by zlib. These functions are + * mainly useful for testing, as the defaults should work with most users. + * Those users who are tight on memory or want faster performance at the + * expense of compression can modify them. See the compression library + * header file (zlib.h) for an explanation of the compression functions. + */ + +/* Set the filtering method(s) used by libpng. Currently, the only valid + * value for "method" is 0. + */ +PNG_EXPORT(67, void, png_set_filter, (png_structrp png_ptr, int method, + int filters)); +#endif /* WRITE */ + +/* Flags for png_set_filter() to say which filters to use. The flags + * are chosen so that they don't conflict with real filter types + * below, in case they are supplied instead of the #defined constants. + * These values should NOT be changed. + */ +#define PNG_NO_FILTERS 0x00 +#define PNG_FILTER_NONE 0x08 +#define PNG_FILTER_SUB 0x10 +#define PNG_FILTER_UP 0x20 +#define PNG_FILTER_AVG 0x40 +#define PNG_FILTER_PAETH 0x80 +#define PNG_FAST_FILTERS (PNG_FILTER_NONE | PNG_FILTER_SUB | PNG_FILTER_UP) +#define PNG_ALL_FILTERS (PNG_FAST_FILTERS | PNG_FILTER_AVG | PNG_FILTER_PAETH) + +/* Filter values (not flags) - used in pngwrite.c, pngwutil.c for now. + * These defines should NOT be changed. + */ +#define PNG_FILTER_VALUE_NONE 0 +#define PNG_FILTER_VALUE_SUB 1 +#define PNG_FILTER_VALUE_UP 2 +#define PNG_FILTER_VALUE_AVG 3 +#define PNG_FILTER_VALUE_PAETH 4 +#define PNG_FILTER_VALUE_LAST 5 + +#ifdef PNG_WRITE_SUPPORTED +#ifdef PNG_WRITE_WEIGHTED_FILTER_SUPPORTED /* DEPRECATED */ +PNG_FP_EXPORT(68, void, png_set_filter_heuristics, (png_structrp png_ptr, + int heuristic_method, int num_weights, png_const_doublep filter_weights, + png_const_doublep filter_costs)) +PNG_FIXED_EXPORT(209, void, png_set_filter_heuristics_fixed, + (png_structrp png_ptr, int heuristic_method, int num_weights, + png_const_fixed_point_p filter_weights, + png_const_fixed_point_p filter_costs)) +#endif /* WRITE_WEIGHTED_FILTER */ + +/* The following are no longer used and will be removed from libpng-1.7: */ +#define PNG_FILTER_HEURISTIC_DEFAULT 0 /* Currently "UNWEIGHTED" */ +#define PNG_FILTER_HEURISTIC_UNWEIGHTED 1 /* Used by libpng < 0.95 */ +#define PNG_FILTER_HEURISTIC_WEIGHTED 2 /* Experimental feature */ +#define PNG_FILTER_HEURISTIC_LAST 3 /* Not a valid value */ + +/* Set the library compression level. Currently, valid values range from + * 0 - 9, corresponding directly to the zlib compression levels 0 - 9 + * (0 - no compression, 9 - "maximal" compression). Note that tests have + * shown that zlib compression levels 3-6 usually perform as well as level 9 + * for PNG images, and do considerably fewer calculations. In the future, + * these values may not correspond directly to the zlib compression levels. + */ +#ifdef PNG_WRITE_CUSTOMIZE_COMPRESSION_SUPPORTED +PNG_EXPORT(69, void, png_set_compression_level, (png_structrp png_ptr, + int level)); + +PNG_EXPORT(70, void, png_set_compression_mem_level, (png_structrp png_ptr, + int mem_level)); + +PNG_EXPORT(71, void, png_set_compression_strategy, (png_structrp png_ptr, + int strategy)); + +/* If PNG_WRITE_OPTIMIZE_CMF_SUPPORTED is defined, libpng will use a + * smaller value of window_bits if it can do so safely. + */ +PNG_EXPORT(72, void, png_set_compression_window_bits, (png_structrp png_ptr, + int window_bits)); + +PNG_EXPORT(73, void, png_set_compression_method, (png_structrp png_ptr, + int method)); +#endif /* WRITE_CUSTOMIZE_COMPRESSION */ + +#ifdef PNG_WRITE_CUSTOMIZE_ZTXT_COMPRESSION_SUPPORTED +/* Also set zlib parameters for compressing non-IDAT chunks */ +PNG_EXPORT(222, void, png_set_text_compression_level, (png_structrp png_ptr, + int level)); + +PNG_EXPORT(223, void, png_set_text_compression_mem_level, (png_structrp png_ptr, + int mem_level)); + +PNG_EXPORT(224, void, png_set_text_compression_strategy, (png_structrp png_ptr, + int strategy)); + +/* If PNG_WRITE_OPTIMIZE_CMF_SUPPORTED is defined, libpng will use a + * smaller value of window_bits if it can do so safely. + */ +PNG_EXPORT(225, void, png_set_text_compression_window_bits, + (png_structrp png_ptr, int window_bits)); + +PNG_EXPORT(226, void, png_set_text_compression_method, (png_structrp png_ptr, + int method)); +#endif /* WRITE_CUSTOMIZE_ZTXT_COMPRESSION */ +#endif /* WRITE */ + +/* These next functions are called for input/output, memory, and error + * handling. They are in the file pngrio.c, pngwio.c, and pngerror.c, + * and call standard C I/O routines such as fread(), fwrite(), and + * fprintf(). These functions can be made to use other I/O routines + * at run time for those applications that need to handle I/O in a + * different manner by calling png_set_???_fn(). See libpng-manual.txt for + * more information. + */ + +#ifdef PNG_STDIO_SUPPORTED +/* Initialize the input/output for the PNG file to the default functions. */ +PNG_EXPORT(74, void, png_init_io, (png_structrp png_ptr, png_FILE_p fp)); +#endif + +/* Replace the (error and abort), and warning functions with user + * supplied functions. If no messages are to be printed you must still + * write and use replacement functions. The replacement error_fn should + * still do a longjmp to the last setjmp location if you are using this + * method of error handling. If error_fn or warning_fn is NULL, the + * default function will be used. + */ + +PNG_EXPORT(75, void, png_set_error_fn, (png_structrp png_ptr, + png_voidp error_ptr, png_error_ptr error_fn, png_error_ptr warning_fn)); + +/* Return the user pointer associated with the error functions */ +PNG_EXPORT(76, png_voidp, png_get_error_ptr, (png_const_structrp png_ptr)); + +/* Replace the default data output functions with a user supplied one(s). + * If buffered output is not used, then output_flush_fn can be set to NULL. + * If PNG_WRITE_FLUSH_SUPPORTED is not defined at libpng compile time + * output_flush_fn will be ignored (and thus can be NULL). + * It is probably a mistake to use NULL for output_flush_fn if + * write_data_fn is not also NULL unless you have built libpng with + * PNG_WRITE_FLUSH_SUPPORTED undefined, because in this case libpng's + * default flush function, which uses the standard *FILE structure, will + * be used. + */ +PNG_EXPORT(77, void, png_set_write_fn, (png_structrp png_ptr, png_voidp io_ptr, + png_rw_ptr write_data_fn, png_flush_ptr output_flush_fn)); + +/* Replace the default data input function with a user supplied one. */ +PNG_EXPORT(78, void, png_set_read_fn, (png_structrp png_ptr, png_voidp io_ptr, + png_rw_ptr read_data_fn)); + +/* Return the user pointer associated with the I/O functions */ +PNG_EXPORT(79, png_voidp, png_get_io_ptr, (png_const_structrp png_ptr)); + +PNG_EXPORT(80, void, png_set_read_status_fn, (png_structrp png_ptr, + png_read_status_ptr read_row_fn)); + +PNG_EXPORT(81, void, png_set_write_status_fn, (png_structrp png_ptr, + png_write_status_ptr write_row_fn)); + +#ifdef PNG_USER_MEM_SUPPORTED +/* Replace the default memory allocation functions with user supplied one(s). */ +PNG_EXPORT(82, void, png_set_mem_fn, (png_structrp png_ptr, png_voidp mem_ptr, + png_malloc_ptr malloc_fn, png_free_ptr free_fn)); +/* Return the user pointer associated with the memory functions */ +PNG_EXPORT(83, png_voidp, png_get_mem_ptr, (png_const_structrp png_ptr)); +#endif + +#ifdef PNG_READ_USER_TRANSFORM_SUPPORTED +PNG_EXPORT(84, void, png_set_read_user_transform_fn, (png_structrp png_ptr, + png_user_transform_ptr read_user_transform_fn)); +#endif + +#ifdef PNG_WRITE_USER_TRANSFORM_SUPPORTED +PNG_EXPORT(85, void, png_set_write_user_transform_fn, (png_structrp png_ptr, + png_user_transform_ptr write_user_transform_fn)); +#endif + +#ifdef PNG_USER_TRANSFORM_PTR_SUPPORTED +PNG_EXPORT(86, void, png_set_user_transform_info, (png_structrp png_ptr, + png_voidp user_transform_ptr, int user_transform_depth, + int user_transform_channels)); +/* Return the user pointer associated with the user transform functions */ +PNG_EXPORT(87, png_voidp, png_get_user_transform_ptr, + (png_const_structrp png_ptr)); +#endif + +#ifdef PNG_USER_TRANSFORM_INFO_SUPPORTED +/* Return information about the row currently being processed. Note that these + * APIs do not fail but will return unexpected results if called outside a user + * transform callback. Also note that when transforming an interlaced image the + * row number is the row number within the sub-image of the interlace pass, so + * the value will increase to the height of the sub-image (not the full image) + * then reset to 0 for the next pass. + * + * Use PNG_ROW_FROM_PASS_ROW(row, pass) and PNG_COL_FROM_PASS_COL(col, pass) to + * find the output pixel (x,y) given an interlaced sub-image pixel + * (row,col,pass). (See below for these macros.) + */ +PNG_EXPORT(217, png_uint_32, png_get_current_row_number, (png_const_structrp)); +PNG_EXPORT(218, png_byte, png_get_current_pass_number, (png_const_structrp)); +#endif + +#ifdef PNG_READ_USER_CHUNKS_SUPPORTED +/* This callback is called only for *unknown* chunks. If + * PNG_HANDLE_AS_UNKNOWN_SUPPORTED is set then it is possible to set known + * chunks to be treated as unknown, however in this case the callback must do + * any processing required by the chunk (e.g. by calling the appropriate + * png_set_ APIs.) + * + * There is no write support - on write, by default, all the chunks in the + * 'unknown' list are written in the specified position. + * + * The integer return from the callback function is interpreted thus: + * + * negative: An error occurred; png_chunk_error will be called. + * zero: The chunk was not handled, the chunk will be saved. A critical + * chunk will cause an error at this point unless it is to be saved. + * positive: The chunk was handled, libpng will ignore/discard it. + * + * See "INTERACTION WITH USER CHUNK CALLBACKS" below for important notes about + * how this behavior will change in libpng 1.7 + */ +PNG_EXPORT(88, void, png_set_read_user_chunk_fn, (png_structrp png_ptr, + png_voidp user_chunk_ptr, png_user_chunk_ptr read_user_chunk_fn)); +#endif + +#ifdef PNG_USER_CHUNKS_SUPPORTED +PNG_EXPORT(89, png_voidp, png_get_user_chunk_ptr, (png_const_structrp png_ptr)); +#endif + +#ifdef PNG_PROGRESSIVE_READ_SUPPORTED +/* Sets the function callbacks for the push reader, and a pointer to a + * user-defined structure available to the callback functions. + */ +PNG_EXPORT(90, void, png_set_progressive_read_fn, (png_structrp png_ptr, + png_voidp progressive_ptr, png_progressive_info_ptr info_fn, + png_progressive_row_ptr row_fn, png_progressive_end_ptr end_fn)); + +/* Returns the user pointer associated with the push read functions */ +PNG_EXPORT(91, png_voidp, png_get_progressive_ptr, + (png_const_structrp png_ptr)); + +/* Function to be called when data becomes available */ +PNG_EXPORT(92, void, png_process_data, (png_structrp png_ptr, + png_inforp info_ptr, png_bytep buffer, size_t buffer_size)); + +/* A function which may be called *only* within png_process_data to stop the + * processing of any more data. The function returns the number of bytes + * remaining, excluding any that libpng has cached internally. A subsequent + * call to png_process_data must supply these bytes again. If the argument + * 'save' is set to true the routine will first save all the pending data and + * will always return 0. + */ +PNG_EXPORT(219, size_t, png_process_data_pause, (png_structrp, int save)); + +/* A function which may be called *only* outside (after) a call to + * png_process_data. It returns the number of bytes of data to skip in the + * input. Normally it will return 0, but if it returns a non-zero value the + * application must skip than number of bytes of input data and pass the + * following data to the next call to png_process_data. + */ +PNG_EXPORT(220, png_uint_32, png_process_data_skip, (png_structrp)); + +/* Function that combines rows. 'new_row' is a flag that should come from + * the callback and be non-NULL if anything needs to be done; the library + * stores its own version of the new data internally and ignores the passed + * in value. + */ +PNG_EXPORT(93, void, png_progressive_combine_row, (png_const_structrp png_ptr, + png_bytep old_row, png_const_bytep new_row)); +#endif /* PROGRESSIVE_READ */ + +PNG_EXPORTA(94, png_voidp, png_malloc, (png_const_structrp png_ptr, + png_alloc_size_t size), PNG_ALLOCATED); +/* Added at libpng version 1.4.0 */ +PNG_EXPORTA(95, png_voidp, png_calloc, (png_const_structrp png_ptr, + png_alloc_size_t size), PNG_ALLOCATED); + +/* Added at libpng version 1.2.4 */ +PNG_EXPORTA(96, png_voidp, png_malloc_warn, (png_const_structrp png_ptr, + png_alloc_size_t size), PNG_ALLOCATED); + +/* Frees a pointer allocated by png_malloc() */ +PNG_EXPORT(97, void, png_free, (png_const_structrp png_ptr, png_voidp ptr)); + +/* Free data that was allocated internally */ +PNG_EXPORT(98, void, png_free_data, (png_const_structrp png_ptr, + png_inforp info_ptr, png_uint_32 free_me, int num)); + +/* Reassign the responsibility for freeing existing data, whether allocated + * by libpng or by the application; this works on the png_info structure passed + * in, without changing the state for other png_info structures. + */ +PNG_EXPORT(99, void, png_data_freer, (png_const_structrp png_ptr, + png_inforp info_ptr, int freer, png_uint_32 mask)); + +/* Assignments for png_data_freer */ +#define PNG_DESTROY_WILL_FREE_DATA 1 +#define PNG_SET_WILL_FREE_DATA 1 +#define PNG_USER_WILL_FREE_DATA 2 +/* Flags for png_ptr->free_me and info_ptr->free_me */ +#define PNG_FREE_HIST 0x0008U +#define PNG_FREE_ICCP 0x0010U +#define PNG_FREE_SPLT 0x0020U +#define PNG_FREE_ROWS 0x0040U +#define PNG_FREE_PCAL 0x0080U +#define PNG_FREE_SCAL 0x0100U +#ifdef PNG_STORE_UNKNOWN_CHUNKS_SUPPORTED +# define PNG_FREE_UNKN 0x0200U +#endif +/* PNG_FREE_LIST 0x0400U removed in 1.6.0 because it is ignored */ +#define PNG_FREE_PLTE 0x1000U +#define PNG_FREE_TRNS 0x2000U +#define PNG_FREE_TEXT 0x4000U +#define PNG_FREE_EXIF 0x8000U /* Added at libpng-1.6.31 */ +#define PNG_FREE_ALL 0xffffU +#define PNG_FREE_MUL 0x4220U /* PNG_FREE_SPLT|PNG_FREE_TEXT|PNG_FREE_UNKN */ + +#ifdef PNG_USER_MEM_SUPPORTED +PNG_EXPORTA(100, png_voidp, png_malloc_default, (png_const_structrp png_ptr, + png_alloc_size_t size), PNG_ALLOCATED PNG_DEPRECATED); +PNG_EXPORTA(101, void, png_free_default, (png_const_structrp png_ptr, + png_voidp ptr), PNG_DEPRECATED); +#endif + +#ifdef PNG_ERROR_TEXT_SUPPORTED +/* Fatal error in PNG image of libpng - can't continue */ +PNG_EXPORTA(102, void, png_error, (png_const_structrp png_ptr, + png_const_charp error_message), PNG_NORETURN); + +/* The same, but the chunk name is prepended to the error string. */ +PNG_EXPORTA(103, void, png_chunk_error, (png_const_structrp png_ptr, + png_const_charp error_message), PNG_NORETURN); + +#else +/* Fatal error in PNG image of libpng - can't continue */ +PNG_EXPORTA(104, void, png_err, (png_const_structrp png_ptr), PNG_NORETURN); +# define png_error(s1,s2) png_err(s1) +# define png_chunk_error(s1,s2) png_err(s1) +#endif + +#ifdef PNG_WARNINGS_SUPPORTED +/* Non-fatal error in libpng. Can continue, but may have a problem. */ +PNG_EXPORT(105, void, png_warning, (png_const_structrp png_ptr, + png_const_charp warning_message)); + +/* Non-fatal error in libpng, chunk name is prepended to message. */ +PNG_EXPORT(106, void, png_chunk_warning, (png_const_structrp png_ptr, + png_const_charp warning_message)); +#else +# define png_warning(s1,s2) ((void)(s1)) +# define png_chunk_warning(s1,s2) ((void)(s1)) +#endif + +#ifdef PNG_BENIGN_ERRORS_SUPPORTED +/* Benign error in libpng. Can continue, but may have a problem. + * User can choose whether to handle as a fatal error or as a warning. */ +PNG_EXPORT(107, void, png_benign_error, (png_const_structrp png_ptr, + png_const_charp warning_message)); + +#ifdef PNG_READ_SUPPORTED +/* Same, chunk name is prepended to message (only during read) */ +PNG_EXPORT(108, void, png_chunk_benign_error, (png_const_structrp png_ptr, + png_const_charp warning_message)); +#endif + +PNG_EXPORT(109, void, png_set_benign_errors, + (png_structrp png_ptr, int allowed)); +#else +# ifdef PNG_ALLOW_BENIGN_ERRORS +# define png_benign_error png_warning +# define png_chunk_benign_error png_chunk_warning +# else +# define png_benign_error png_error +# define png_chunk_benign_error png_chunk_error +# endif +#endif + +/* The png_set_ functions are for storing values in the png_info_struct. + * Similarly, the png_get_ calls are used to read values from the + * png_info_struct, either storing the parameters in the passed variables, or + * setting pointers into the png_info_struct where the data is stored. The + * png_get_ functions return a non-zero value if the data was available + * in info_ptr, or return zero and do not change any of the parameters if the + * data was not available. + * + * These functions should be used instead of directly accessing png_info + * to avoid problems with future changes in the size and internal layout of + * png_info_struct. + */ +/* Returns "flag" if chunk data is valid in info_ptr. */ +PNG_EXPORT(110, png_uint_32, png_get_valid, (png_const_structrp png_ptr, + png_const_inforp info_ptr, png_uint_32 flag)); + +/* Returns number of bytes needed to hold a transformed row. */ +PNG_EXPORT(111, size_t, png_get_rowbytes, (png_const_structrp png_ptr, + png_const_inforp info_ptr)); + +#ifdef PNG_INFO_IMAGE_SUPPORTED +/* Returns row_pointers, which is an array of pointers to scanlines that was + * returned from png_read_png(). + */ +PNG_EXPORT(112, png_bytepp, png_get_rows, (png_const_structrp png_ptr, + png_const_inforp info_ptr)); + +/* Set row_pointers, which is an array of pointers to scanlines for use + * by png_write_png(). + */ +PNG_EXPORT(113, void, png_set_rows, (png_const_structrp png_ptr, + png_inforp info_ptr, png_bytepp row_pointers)); +#endif + +/* Returns number of color channels in image. */ +PNG_EXPORT(114, png_byte, png_get_channels, (png_const_structrp png_ptr, + png_const_inforp info_ptr)); + +#ifdef PNG_EASY_ACCESS_SUPPORTED +/* Returns image width in pixels. */ +PNG_EXPORT(115, png_uint_32, png_get_image_width, (png_const_structrp png_ptr, + png_const_inforp info_ptr)); + +/* Returns image height in pixels. */ +PNG_EXPORT(116, png_uint_32, png_get_image_height, (png_const_structrp png_ptr, + png_const_inforp info_ptr)); + +/* Returns image bit_depth. */ +PNG_EXPORT(117, png_byte, png_get_bit_depth, (png_const_structrp png_ptr, + png_const_inforp info_ptr)); + +/* Returns image color_type. */ +PNG_EXPORT(118, png_byte, png_get_color_type, (png_const_structrp png_ptr, + png_const_inforp info_ptr)); + +/* Returns image filter_type. */ +PNG_EXPORT(119, png_byte, png_get_filter_type, (png_const_structrp png_ptr, + png_const_inforp info_ptr)); + +/* Returns image interlace_type. */ +PNG_EXPORT(120, png_byte, png_get_interlace_type, (png_const_structrp png_ptr, + png_const_inforp info_ptr)); + +/* Returns image compression_type. */ +PNG_EXPORT(121, png_byte, png_get_compression_type, (png_const_structrp png_ptr, + png_const_inforp info_ptr)); + +/* Returns image resolution in pixels per meter, from pHYs chunk data. */ +PNG_EXPORT(122, png_uint_32, png_get_pixels_per_meter, + (png_const_structrp png_ptr, png_const_inforp info_ptr)); +PNG_EXPORT(123, png_uint_32, png_get_x_pixels_per_meter, + (png_const_structrp png_ptr, png_const_inforp info_ptr)); +PNG_EXPORT(124, png_uint_32, png_get_y_pixels_per_meter, + (png_const_structrp png_ptr, png_const_inforp info_ptr)); + +/* Returns pixel aspect ratio, computed from pHYs chunk data. */ +PNG_FP_EXPORT(125, float, png_get_pixel_aspect_ratio, + (png_const_structrp png_ptr, png_const_inforp info_ptr)) +PNG_FIXED_EXPORT(210, png_fixed_point, png_get_pixel_aspect_ratio_fixed, + (png_const_structrp png_ptr, png_const_inforp info_ptr)) + +/* Returns image x, y offset in pixels or microns, from oFFs chunk data. */ +PNG_EXPORT(126, png_int_32, png_get_x_offset_pixels, + (png_const_structrp png_ptr, png_const_inforp info_ptr)); +PNG_EXPORT(127, png_int_32, png_get_y_offset_pixels, + (png_const_structrp png_ptr, png_const_inforp info_ptr)); +PNG_EXPORT(128, png_int_32, png_get_x_offset_microns, + (png_const_structrp png_ptr, png_const_inforp info_ptr)); +PNG_EXPORT(129, png_int_32, png_get_y_offset_microns, + (png_const_structrp png_ptr, png_const_inforp info_ptr)); + +#endif /* EASY_ACCESS */ + +#ifdef PNG_READ_SUPPORTED +/* Returns pointer to signature string read from PNG header */ +PNG_EXPORT(130, png_const_bytep, png_get_signature, (png_const_structrp png_ptr, + png_const_inforp info_ptr)); +#endif + +#ifdef PNG_bKGD_SUPPORTED +PNG_EXPORT(131, png_uint_32, png_get_bKGD, (png_const_structrp png_ptr, + png_inforp info_ptr, png_color_16p *background)); +#endif + +#ifdef PNG_bKGD_SUPPORTED +PNG_EXPORT(132, void, png_set_bKGD, (png_const_structrp png_ptr, + png_inforp info_ptr, png_const_color_16p background)); +#endif + +#ifdef PNG_cHRM_SUPPORTED +PNG_FP_EXPORT(133, png_uint_32, png_get_cHRM, (png_const_structrp png_ptr, + png_const_inforp info_ptr, double *white_x, double *white_y, double *red_x, + double *red_y, double *green_x, double *green_y, double *blue_x, + double *blue_y)) +PNG_FP_EXPORT(230, png_uint_32, png_get_cHRM_XYZ, (png_const_structrp png_ptr, + png_const_inforp info_ptr, double *red_X, double *red_Y, double *red_Z, + double *green_X, double *green_Y, double *green_Z, double *blue_X, + double *blue_Y, double *blue_Z)) +PNG_FIXED_EXPORT(134, png_uint_32, png_get_cHRM_fixed, + (png_const_structrp png_ptr, png_const_inforp info_ptr, + png_fixed_point *int_white_x, png_fixed_point *int_white_y, + png_fixed_point *int_red_x, png_fixed_point *int_red_y, + png_fixed_point *int_green_x, png_fixed_point *int_green_y, + png_fixed_point *int_blue_x, png_fixed_point *int_blue_y)) +PNG_FIXED_EXPORT(231, png_uint_32, png_get_cHRM_XYZ_fixed, + (png_const_structrp png_ptr, png_const_inforp info_ptr, + png_fixed_point *int_red_X, png_fixed_point *int_red_Y, + png_fixed_point *int_red_Z, png_fixed_point *int_green_X, + png_fixed_point *int_green_Y, png_fixed_point *int_green_Z, + png_fixed_point *int_blue_X, png_fixed_point *int_blue_Y, + png_fixed_point *int_blue_Z)) +#endif + +#ifdef PNG_cHRM_SUPPORTED +PNG_FP_EXPORT(135, void, png_set_cHRM, (png_const_structrp png_ptr, + png_inforp info_ptr, + double white_x, double white_y, double red_x, double red_y, double green_x, + double green_y, double blue_x, double blue_y)) +PNG_FP_EXPORT(232, void, png_set_cHRM_XYZ, (png_const_structrp png_ptr, + png_inforp info_ptr, double red_X, double red_Y, double red_Z, + double green_X, double green_Y, double green_Z, double blue_X, + double blue_Y, double blue_Z)) +PNG_FIXED_EXPORT(136, void, png_set_cHRM_fixed, (png_const_structrp png_ptr, + png_inforp info_ptr, png_fixed_point int_white_x, + png_fixed_point int_white_y, png_fixed_point int_red_x, + png_fixed_point int_red_y, png_fixed_point int_green_x, + png_fixed_point int_green_y, png_fixed_point int_blue_x, + png_fixed_point int_blue_y)) +PNG_FIXED_EXPORT(233, void, png_set_cHRM_XYZ_fixed, (png_const_structrp png_ptr, + png_inforp info_ptr, png_fixed_point int_red_X, png_fixed_point int_red_Y, + png_fixed_point int_red_Z, png_fixed_point int_green_X, + png_fixed_point int_green_Y, png_fixed_point int_green_Z, + png_fixed_point int_blue_X, png_fixed_point int_blue_Y, + png_fixed_point int_blue_Z)) +#endif + +#ifdef PNG_cICP_SUPPORTED +PNG_EXPORT(250, png_uint_32, png_get_cICP, (png_const_structrp png_ptr, + png_const_inforp info_ptr, png_bytep colour_primaries, + png_bytep transfer_function, png_bytep matrix_coefficients, + png_bytep video_full_range_flag)); +#endif + +#ifdef PNG_cICP_SUPPORTED +PNG_EXPORT(251, void, png_set_cICP, (png_const_structrp png_ptr, + png_inforp info_ptr, png_byte colour_primaries, + png_byte transfer_function, png_byte matrix_coefficients, + png_byte video_full_range_flag)); +#endif + +#ifdef PNG_cLLI_SUPPORTED +PNG_FP_EXPORT(252, png_uint_32, png_get_cLLI, (png_const_structrp png_ptr, + png_const_inforp info_ptr, double *maximum_content_light_level, + double *maximum_frame_average_light_level)) +PNG_FIXED_EXPORT(253, png_uint_32, png_get_cLLI_fixed, + (png_const_structrp png_ptr, png_const_inforp info_ptr, + /* The values below are in cd/m2 (nits) and are scaled by 10,000; not + * 100,000 as in the case of png_fixed_point. + */ + png_uint_32p maximum_content_light_level_scaled_by_10000, + png_uint_32p maximum_frame_average_light_level_scaled_by_10000)) +#endif + +#ifdef PNG_cLLI_SUPPORTED +PNG_FP_EXPORT(254, void, png_set_cLLI, (png_const_structrp png_ptr, + png_inforp info_ptr, double maximum_content_light_level, + double maximum_frame_average_light_level)) +PNG_FIXED_EXPORT(255, void, png_set_cLLI_fixed, (png_const_structrp png_ptr, + png_inforp info_ptr, + /* The values below are in cd/m2 (nits) and are scaled by 10,000; not + * 100,000 as in the case of png_fixed_point. + */ + png_uint_32 maximum_content_light_level_scaled_by_10000, + png_uint_32 maximum_frame_average_light_level_scaled_by_10000)) +#endif + +#ifdef PNG_eXIf_SUPPORTED +PNG_EXPORT(246, png_uint_32, png_get_eXIf, (png_const_structrp png_ptr, + png_inforp info_ptr, png_bytep *exif)); +PNG_EXPORT(247, void, png_set_eXIf, (png_const_structrp png_ptr, + png_inforp info_ptr, png_bytep exif)); + +PNG_EXPORT(248, png_uint_32, png_get_eXIf_1, (png_const_structrp png_ptr, + png_const_inforp info_ptr, png_uint_32 *num_exif, png_bytep *exif)); +PNG_EXPORT(249, void, png_set_eXIf_1, (png_const_structrp png_ptr, + png_inforp info_ptr, png_uint_32 num_exif, png_bytep exif)); +#endif + +#ifdef PNG_gAMA_SUPPORTED +PNG_FP_EXPORT(137, png_uint_32, png_get_gAMA, (png_const_structrp png_ptr, + png_const_inforp info_ptr, double *file_gamma)) +PNG_FIXED_EXPORT(138, png_uint_32, png_get_gAMA_fixed, + (png_const_structrp png_ptr, png_const_inforp info_ptr, + png_fixed_point *int_file_gamma)) +#endif + +#ifdef PNG_gAMA_SUPPORTED +PNG_FP_EXPORT(139, void, png_set_gAMA, (png_const_structrp png_ptr, + png_inforp info_ptr, double file_gamma)) +PNG_FIXED_EXPORT(140, void, png_set_gAMA_fixed, (png_const_structrp png_ptr, + png_inforp info_ptr, png_fixed_point int_file_gamma)) +#endif + +#ifdef PNG_hIST_SUPPORTED +PNG_EXPORT(141, png_uint_32, png_get_hIST, (png_const_structrp png_ptr, + png_inforp info_ptr, png_uint_16p *hist)); +PNG_EXPORT(142, void, png_set_hIST, (png_const_structrp png_ptr, + png_inforp info_ptr, png_const_uint_16p hist)); +#endif + +PNG_EXPORT(143, png_uint_32, png_get_IHDR, (png_const_structrp png_ptr, + png_const_inforp info_ptr, png_uint_32 *width, png_uint_32 *height, + int *bit_depth, int *color_type, int *interlace_method, + int *compression_method, int *filter_method)); + +PNG_EXPORT(144, void, png_set_IHDR, (png_const_structrp png_ptr, + png_inforp info_ptr, png_uint_32 width, png_uint_32 height, int bit_depth, + int color_type, int interlace_method, int compression_method, + int filter_method)); + +#ifdef PNG_mDCV_SUPPORTED +PNG_FP_EXPORT(256, png_uint_32, png_get_mDCV, (png_const_structrp png_ptr, + png_const_inforp info_ptr, + /* The chromaticities of the mastering display. As cHRM, but independent of + * the encoding endpoints in cHRM, or cICP, or iCCP. These values will + * always be in the range 0 to 1.3107. + */ + double *white_x, double *white_y, double *red_x, double *red_y, + double *green_x, double *green_y, double *blue_x, double *blue_y, + /* Mastering display luminance in cd/m2 (nits). */ + double *mastering_display_maximum_luminance, + double *mastering_display_minimum_luminance)) + +PNG_FIXED_EXPORT(257, png_uint_32, png_get_mDCV_fixed, + (png_const_structrp png_ptr, png_const_inforp info_ptr, + png_fixed_point *int_white_x, png_fixed_point *int_white_y, + png_fixed_point *int_red_x, png_fixed_point *int_red_y, + png_fixed_point *int_green_x, png_fixed_point *int_green_y, + png_fixed_point *int_blue_x, png_fixed_point *int_blue_y, + /* Mastering display luminance in cd/m2 (nits) multiplied (scaled) by + * 10,000. + */ + png_uint_32p mastering_display_maximum_luminance_scaled_by_10000, + png_uint_32p mastering_display_minimum_luminance_scaled_by_10000)) +#endif + +#ifdef PNG_mDCV_SUPPORTED +PNG_FP_EXPORT(258, void, png_set_mDCV, (png_const_structrp png_ptr, + png_inforp info_ptr, + /* The chromaticities of the mastering display. As cHRM, but independent of + * the encoding endpoints in cHRM, or cICP, or iCCP. + */ + double white_x, double white_y, double red_x, double red_y, double green_x, + double green_y, double blue_x, double blue_y, + /* Mastering display luminance in cd/m2 (nits). */ + double mastering_display_maximum_luminance, + double mastering_display_minimum_luminance)) + +PNG_FIXED_EXPORT(259, void, png_set_mDCV_fixed, (png_const_structrp png_ptr, + png_inforp info_ptr, + /* The admissible range of these values is not the full range of a PNG + * fixed point value. Negative values cannot be encoded and the maximum + * value is about 1.3 */ + png_fixed_point int_white_x, png_fixed_point int_white_y, + png_fixed_point int_red_x, png_fixed_point int_red_y, + png_fixed_point int_green_x, png_fixed_point int_green_y, + png_fixed_point int_blue_x, png_fixed_point int_blue_y, + /* These are PNG unsigned 4 byte values: 31-bit unsigned values. The MSB + * must be zero. + */ + png_uint_32 mastering_display_maximum_luminance_scaled_by_10000, + png_uint_32 mastering_display_minimum_luminance_scaled_by_10000)) +#endif + +#ifdef PNG_oFFs_SUPPORTED +PNG_EXPORT(145, png_uint_32, png_get_oFFs, (png_const_structrp png_ptr, + png_const_inforp info_ptr, png_int_32 *offset_x, png_int_32 *offset_y, + int *unit_type)); +#endif + +#ifdef PNG_oFFs_SUPPORTED +PNG_EXPORT(146, void, png_set_oFFs, (png_const_structrp png_ptr, + png_inforp info_ptr, png_int_32 offset_x, png_int_32 offset_y, + int unit_type)); +#endif + +#ifdef PNG_pCAL_SUPPORTED +PNG_EXPORT(147, png_uint_32, png_get_pCAL, (png_const_structrp png_ptr, + png_inforp info_ptr, png_charp *purpose, png_int_32 *X0, + png_int_32 *X1, int *type, int *nparams, png_charp *units, + png_charpp *params)); +#endif + +#ifdef PNG_pCAL_SUPPORTED +PNG_EXPORT(148, void, png_set_pCAL, (png_const_structrp png_ptr, + png_inforp info_ptr, png_const_charp purpose, png_int_32 X0, png_int_32 X1, + int type, int nparams, png_const_charp units, png_charpp params)); +#endif + +#ifdef PNG_pHYs_SUPPORTED +PNG_EXPORT(149, png_uint_32, png_get_pHYs, (png_const_structrp png_ptr, + png_const_inforp info_ptr, png_uint_32 *res_x, png_uint_32 *res_y, + int *unit_type)); +#endif + +#ifdef PNG_pHYs_SUPPORTED +PNG_EXPORT(150, void, png_set_pHYs, (png_const_structrp png_ptr, + png_inforp info_ptr, png_uint_32 res_x, png_uint_32 res_y, int unit_type)); +#endif + +PNG_EXPORT(151, png_uint_32, png_get_PLTE, (png_const_structrp png_ptr, + png_inforp info_ptr, png_colorp *palette, int *num_palette)); + +PNG_EXPORT(152, void, png_set_PLTE, (png_structrp png_ptr, + png_inforp info_ptr, png_const_colorp palette, int num_palette)); + +#ifdef PNG_sBIT_SUPPORTED +PNG_EXPORT(153, png_uint_32, png_get_sBIT, (png_const_structrp png_ptr, + png_inforp info_ptr, png_color_8p *sig_bit)); +#endif + +#ifdef PNG_sBIT_SUPPORTED +PNG_EXPORT(154, void, png_set_sBIT, (png_const_structrp png_ptr, + png_inforp info_ptr, png_const_color_8p sig_bit)); +#endif + +#ifdef PNG_sRGB_SUPPORTED +PNG_EXPORT(155, png_uint_32, png_get_sRGB, (png_const_structrp png_ptr, + png_const_inforp info_ptr, int *file_srgb_intent)); +#endif + +#ifdef PNG_sRGB_SUPPORTED +PNG_EXPORT(156, void, png_set_sRGB, (png_const_structrp png_ptr, + png_inforp info_ptr, int srgb_intent)); +PNG_EXPORT(157, void, png_set_sRGB_gAMA_and_cHRM, (png_const_structrp png_ptr, + png_inforp info_ptr, int srgb_intent)); +#endif + +#ifdef PNG_iCCP_SUPPORTED +PNG_EXPORT(158, png_uint_32, png_get_iCCP, (png_const_structrp png_ptr, + png_inforp info_ptr, png_charpp name, int *compression_type, + png_bytepp profile, png_uint_32 *proflen)); +#endif + +#ifdef PNG_iCCP_SUPPORTED +PNG_EXPORT(159, void, png_set_iCCP, (png_const_structrp png_ptr, + png_inforp info_ptr, png_const_charp name, int compression_type, + png_const_bytep profile, png_uint_32 proflen)); +#endif + +#ifdef PNG_sPLT_SUPPORTED +PNG_EXPORT(160, int, png_get_sPLT, (png_const_structrp png_ptr, + png_inforp info_ptr, png_sPLT_tpp entries)); +#endif + +#ifdef PNG_sPLT_SUPPORTED +PNG_EXPORT(161, void, png_set_sPLT, (png_const_structrp png_ptr, + png_inforp info_ptr, png_const_sPLT_tp entries, int nentries)); +#endif + +#ifdef PNG_TEXT_SUPPORTED +/* png_get_text also returns the number of text chunks in *num_text */ +PNG_EXPORT(162, int, png_get_text, (png_const_structrp png_ptr, + png_inforp info_ptr, png_textp *text_ptr, int *num_text)); +#endif + +/* Note while png_set_text() will accept a structure whose text, + * language, and translated keywords are NULL pointers, the structure + * returned by png_get_text will always contain regular + * zero-terminated C strings. They might be empty strings but + * they will never be NULL pointers. + */ + +#ifdef PNG_TEXT_SUPPORTED +PNG_EXPORT(163, void, png_set_text, (png_const_structrp png_ptr, + png_inforp info_ptr, png_const_textp text_ptr, int num_text)); +#endif + +#ifdef PNG_tIME_SUPPORTED +PNG_EXPORT(164, png_uint_32, png_get_tIME, (png_const_structrp png_ptr, + png_inforp info_ptr, png_timep *mod_time)); +#endif + +#ifdef PNG_tIME_SUPPORTED +PNG_EXPORT(165, void, png_set_tIME, (png_const_structrp png_ptr, + png_inforp info_ptr, png_const_timep mod_time)); +#endif + +#ifdef PNG_tRNS_SUPPORTED +PNG_EXPORT(166, png_uint_32, png_get_tRNS, (png_const_structrp png_ptr, + png_inforp info_ptr, png_bytep *trans_alpha, int *num_trans, + png_color_16p *trans_color)); +#endif + +#ifdef PNG_tRNS_SUPPORTED +PNG_EXPORT(167, void, png_set_tRNS, (png_structrp png_ptr, + png_inforp info_ptr, png_const_bytep trans_alpha, int num_trans, + png_const_color_16p trans_color)); +#endif + +#ifdef PNG_sCAL_SUPPORTED +PNG_FP_EXPORT(168, png_uint_32, png_get_sCAL, (png_const_structrp png_ptr, + png_const_inforp info_ptr, int *unit, double *width, double *height)) +#if defined(PNG_FLOATING_ARITHMETIC_SUPPORTED) || \ + defined(PNG_FLOATING_POINT_SUPPORTED) +/* NOTE: this API is currently implemented using floating point arithmetic, + * consequently it can only be used on systems with floating point support. + * In any case the range of values supported by png_fixed_point is small and it + * is highly recommended that png_get_sCAL_s be used instead. + */ +PNG_FIXED_EXPORT(214, png_uint_32, png_get_sCAL_fixed, + (png_const_structrp png_ptr, png_const_inforp info_ptr, int *unit, + png_fixed_point *width, png_fixed_point *height)) +#endif +PNG_EXPORT(169, png_uint_32, png_get_sCAL_s, + (png_const_structrp png_ptr, png_const_inforp info_ptr, int *unit, + png_charpp swidth, png_charpp sheight)); + +PNG_FP_EXPORT(170, void, png_set_sCAL, (png_const_structrp png_ptr, + png_inforp info_ptr, int unit, double width, double height)) +PNG_FIXED_EXPORT(213, void, png_set_sCAL_fixed, (png_const_structrp png_ptr, + png_inforp info_ptr, int unit, png_fixed_point width, + png_fixed_point height)) +PNG_EXPORT(171, void, png_set_sCAL_s, (png_const_structrp png_ptr, + png_inforp info_ptr, int unit, + png_const_charp swidth, png_const_charp sheight)); +#endif /* sCAL */ + +#ifdef PNG_SET_UNKNOWN_CHUNKS_SUPPORTED +/* Provide the default handling for all unknown chunks or, optionally, for + * specific unknown chunks. + * + * NOTE: prior to 1.6.0 the handling specified for particular chunks on read was + * ignored and the default was used, the per-chunk setting only had an effect on + * write. If you wish to have chunk-specific handling on read in code that must + * work on earlier versions you must use a user chunk callback to specify the + * desired handling (keep or discard.) + * + * The 'keep' parameter is a PNG_HANDLE_CHUNK_ value as listed below. The + * parameter is interpreted as follows: + * + * READ: + * PNG_HANDLE_CHUNK_AS_DEFAULT: + * Known chunks: do normal libpng processing, do not keep the chunk (but + * see the comments below about PNG_HANDLE_AS_UNKNOWN_SUPPORTED) + * Unknown chunks: for a specific chunk use the global default, when used + * as the default discard the chunk data. + * PNG_HANDLE_CHUNK_NEVER: + * Discard the chunk data. + * PNG_HANDLE_CHUNK_IF_SAFE: + * Keep the chunk data if the chunk is not critical else raise a chunk + * error. + * PNG_HANDLE_CHUNK_ALWAYS: + * Keep the chunk data. + * + * If the chunk data is saved it can be retrieved using png_get_unknown_chunks, + * below. Notice that specifying "AS_DEFAULT" as a global default is equivalent + * to specifying "NEVER", however when "AS_DEFAULT" is used for specific chunks + * it simply resets the behavior to the libpng default. + * + * INTERACTION WITH USER CHUNK CALLBACKS: + * The per-chunk handling is always used when there is a png_user_chunk_ptr + * callback and the callback returns 0; the chunk is then always stored *unless* + * it is critical and the per-chunk setting is other than ALWAYS. Notice that + * the global default is *not* used in this case. (In effect the per-chunk + * value is incremented to at least IF_SAFE.) + * + * IMPORTANT NOTE: this behavior will change in libpng 1.7 - the global and + * per-chunk defaults will be honored. If you want to preserve the current + * behavior when your callback returns 0 you must set PNG_HANDLE_CHUNK_IF_SAFE + * as the default - if you don't do this libpng 1.6 will issue a warning. + * + * If you want unhandled unknown chunks to be discarded in libpng 1.6 and + * earlier simply return '1' (handled). + * + * PNG_HANDLE_AS_UNKNOWN_SUPPORTED: + * If this is *not* set known chunks will always be handled by libpng and + * will never be stored in the unknown chunk list. Known chunks listed to + * png_set_keep_unknown_chunks will have no effect. If it is set then known + * chunks listed with a keep other than AS_DEFAULT will *never* be processed + * by libpng, in addition critical chunks must either be processed by the + * callback or saved. + * + * The IHDR and IEND chunks must not be listed. Because this turns off the + * default handling for chunks that would otherwise be recognized the + * behavior of libpng transformations may well become incorrect! + * + * WRITE: + * When writing chunks the options only apply to the chunks specified by + * png_set_unknown_chunks (below), libpng will *always* write known chunks + * required by png_set_ calls and will always write the core critical chunks + * (as required for PLTE). + * + * Each chunk in the png_set_unknown_chunks list is looked up in the + * png_set_keep_unknown_chunks list to find the keep setting, this is then + * interpreted as follows: + * + * PNG_HANDLE_CHUNK_AS_DEFAULT: + * Write safe-to-copy chunks and write other chunks if the global + * default is set to _ALWAYS, otherwise don't write this chunk. + * PNG_HANDLE_CHUNK_NEVER: + * Do not write the chunk. + * PNG_HANDLE_CHUNK_IF_SAFE: + * Write the chunk if it is safe-to-copy, otherwise do not write it. + * PNG_HANDLE_CHUNK_ALWAYS: + * Write the chunk. + * + * Note that the default behavior is effectively the opposite of the read case - + * in read unknown chunks are not stored by default, in write they are written + * by default. Also the behavior of PNG_HANDLE_CHUNK_IF_SAFE is very different + * - on write the safe-to-copy bit is checked, on read the critical bit is + * checked and on read if the chunk is critical an error will be raised. + * + * num_chunks: + * =========== + * If num_chunks is positive, then the "keep" parameter specifies the manner + * for handling only those chunks appearing in the chunk_list array, + * otherwise the chunk list array is ignored. + * + * If num_chunks is 0 the "keep" parameter specifies the default behavior for + * unknown chunks, as described above. + * + * If num_chunks is negative, then the "keep" parameter specifies the manner + * for handling all unknown chunks plus all chunks recognized by libpng + * except for the IHDR, PLTE, tRNS, IDAT, and IEND chunks (which continue to + * be processed by libpng. + */ +#ifdef PNG_HANDLE_AS_UNKNOWN_SUPPORTED +PNG_EXPORT(172, void, png_set_keep_unknown_chunks, (png_structrp png_ptr, + int keep, png_const_bytep chunk_list, int num_chunks)); +#endif /* HANDLE_AS_UNKNOWN */ + +/* The "keep" PNG_HANDLE_CHUNK_ parameter for the specified chunk is returned; + * the result is therefore true (non-zero) if special handling is required, + * false for the default handling. + */ +PNG_EXPORT(173, int, png_handle_as_unknown, (png_const_structrp png_ptr, + png_const_bytep chunk_name)); +#endif /* SET_UNKNOWN_CHUNKS */ + +#ifdef PNG_STORE_UNKNOWN_CHUNKS_SUPPORTED +PNG_EXPORT(174, void, png_set_unknown_chunks, (png_const_structrp png_ptr, + png_inforp info_ptr, png_const_unknown_chunkp unknowns, + int num_unknowns)); + /* NOTE: prior to 1.6.0 this routine set the 'location' field of the added + * unknowns to the location currently stored in the png_struct. This is + * invariably the wrong value on write. To fix this call the following API + * for each chunk in the list with the correct location. If you know your + * code won't be compiled on earlier versions you can rely on + * png_set_unknown_chunks(write-ptr, png_get_unknown_chunks(read-ptr)) doing + * the correct thing. + */ + +PNG_EXPORT(175, void, png_set_unknown_chunk_location, + (png_const_structrp png_ptr, png_inforp info_ptr, int chunk, int location)); + +PNG_EXPORT(176, int, png_get_unknown_chunks, (png_const_structrp png_ptr, + png_inforp info_ptr, png_unknown_chunkpp entries)); +#endif + +/* Png_free_data() will turn off the "valid" flag for anything it frees. + * If you need to turn it off for a chunk that your application has freed, + * you can use png_set_invalid(png_ptr, info_ptr, PNG_INFO_CHNK); + */ +PNG_EXPORT(177, void, png_set_invalid, (png_const_structrp png_ptr, + png_inforp info_ptr, int mask)); + +#ifdef PNG_INFO_IMAGE_SUPPORTED +/* The "params" pointer is currently not used and is for future expansion. */ +#ifdef PNG_SEQUENTIAL_READ_SUPPORTED +PNG_EXPORT(178, void, png_read_png, (png_structrp png_ptr, png_inforp info_ptr, + int transforms, png_voidp params)); +#endif +#ifdef PNG_WRITE_SUPPORTED +PNG_EXPORT(179, void, png_write_png, (png_structrp png_ptr, png_inforp info_ptr, + int transforms, png_voidp params)); +#endif +#endif + +PNG_EXPORT(180, png_const_charp, png_get_copyright, + (png_const_structrp png_ptr)); +PNG_EXPORT(181, png_const_charp, png_get_header_ver, + (png_const_structrp png_ptr)); +PNG_EXPORT(182, png_const_charp, png_get_header_version, + (png_const_structrp png_ptr)); +PNG_EXPORT(183, png_const_charp, png_get_libpng_ver, + (png_const_structrp png_ptr)); + +#ifdef PNG_MNG_FEATURES_SUPPORTED +PNG_EXPORT(184, png_uint_32, png_permit_mng_features, (png_structrp png_ptr, + png_uint_32 mng_features_permitted)); +#endif + +/* For use in png_set_keep_unknown, added to version 1.2.6 */ +#define PNG_HANDLE_CHUNK_AS_DEFAULT 0 +#define PNG_HANDLE_CHUNK_NEVER 1 +#define PNG_HANDLE_CHUNK_IF_SAFE 2 +#define PNG_HANDLE_CHUNK_ALWAYS 3 +#define PNG_HANDLE_CHUNK_LAST 4 + +/* Strip the prepended error numbers ("#nnn ") from error and warning + * messages before passing them to the error or warning handler. + */ +#ifdef PNG_ERROR_NUMBERS_SUPPORTED +PNG_EXPORT(185, void, png_set_strip_error_numbers, (png_structrp png_ptr, + png_uint_32 strip_mode)); +#endif + +/* Added in libpng-1.2.6 */ +#ifdef PNG_SET_USER_LIMITS_SUPPORTED +PNG_EXPORT(186, void, png_set_user_limits, (png_structrp png_ptr, + png_uint_32 user_width_max, png_uint_32 user_height_max)); +PNG_EXPORT(187, png_uint_32, png_get_user_width_max, + (png_const_structrp png_ptr)); +PNG_EXPORT(188, png_uint_32, png_get_user_height_max, + (png_const_structrp png_ptr)); +/* Added in libpng-1.4.0 */ +PNG_EXPORT(189, void, png_set_chunk_cache_max, (png_structrp png_ptr, + png_uint_32 user_chunk_cache_max)); +PNG_EXPORT(190, png_uint_32, png_get_chunk_cache_max, + (png_const_structrp png_ptr)); +/* Added in libpng-1.4.1 */ +PNG_EXPORT(191, void, png_set_chunk_malloc_max, (png_structrp png_ptr, + png_alloc_size_t user_chunk_cache_max)); +PNG_EXPORT(192, png_alloc_size_t, png_get_chunk_malloc_max, + (png_const_structrp png_ptr)); +#endif + +#if defined(PNG_INCH_CONVERSIONS_SUPPORTED) +PNG_EXPORT(193, png_uint_32, png_get_pixels_per_inch, + (png_const_structrp png_ptr, png_const_inforp info_ptr)); + +PNG_EXPORT(194, png_uint_32, png_get_x_pixels_per_inch, + (png_const_structrp png_ptr, png_const_inforp info_ptr)); + +PNG_EXPORT(195, png_uint_32, png_get_y_pixels_per_inch, + (png_const_structrp png_ptr, png_const_inforp info_ptr)); + +PNG_FP_EXPORT(196, float, png_get_x_offset_inches, + (png_const_structrp png_ptr, png_const_inforp info_ptr)) +#ifdef PNG_FIXED_POINT_SUPPORTED /* otherwise not implemented. */ +PNG_FIXED_EXPORT(211, png_fixed_point, png_get_x_offset_inches_fixed, + (png_const_structrp png_ptr, png_const_inforp info_ptr)) +#endif + +PNG_FP_EXPORT(197, float, png_get_y_offset_inches, (png_const_structrp png_ptr, + png_const_inforp info_ptr)) +#ifdef PNG_FIXED_POINT_SUPPORTED /* otherwise not implemented. */ +PNG_FIXED_EXPORT(212, png_fixed_point, png_get_y_offset_inches_fixed, + (png_const_structrp png_ptr, png_const_inforp info_ptr)) +#endif + +# ifdef PNG_pHYs_SUPPORTED +PNG_EXPORT(198, png_uint_32, png_get_pHYs_dpi, (png_const_structrp png_ptr, + png_const_inforp info_ptr, png_uint_32 *res_x, png_uint_32 *res_y, + int *unit_type)); +# endif /* pHYs */ +#endif /* INCH_CONVERSIONS */ + +/* Added in libpng-1.4.0 */ +#ifdef PNG_IO_STATE_SUPPORTED +PNG_EXPORT(199, png_uint_32, png_get_io_state, (png_const_structrp png_ptr)); + +/* Removed from libpng 1.6; use png_get_io_chunk_type. */ +PNG_REMOVED(200, png_const_bytep, png_get_io_chunk_name, (png_structrp png_ptr), + PNG_DEPRECATED) + +PNG_EXPORT(216, png_uint_32, png_get_io_chunk_type, + (png_const_structrp png_ptr)); + +/* The flags returned by png_get_io_state() are the following: */ +# define PNG_IO_NONE 0x0000 /* no I/O at this moment */ +# define PNG_IO_READING 0x0001 /* currently reading */ +# define PNG_IO_WRITING 0x0002 /* currently writing */ +# define PNG_IO_SIGNATURE 0x0010 /* currently at the file signature */ +# define PNG_IO_CHUNK_HDR 0x0020 /* currently at the chunk header */ +# define PNG_IO_CHUNK_DATA 0x0040 /* currently at the chunk data */ +# define PNG_IO_CHUNK_CRC 0x0080 /* currently at the chunk crc */ +# define PNG_IO_MASK_OP 0x000f /* current operation: reading/writing */ +# define PNG_IO_MASK_LOC 0x00f0 /* current location: sig/hdr/data/crc */ +#endif /* IO_STATE */ + +/* Interlace support. The following macros are always defined so that if + * libpng interlace handling is turned off the macros may be used to handle + * interlaced images within the application. + */ +#define PNG_INTERLACE_ADAM7_PASSES 7 + +/* Two macros to return the first row and first column of the original, + * full, image which appears in a given pass. 'pass' is in the range 0 + * to 6 and the result is in the range 0 to 7. + */ +#define PNG_PASS_START_ROW(pass) (((1&~(pass))<<(3-((pass)>>1)))&7) +#define PNG_PASS_START_COL(pass) (((1& (pass))<<(3-(((pass)+1)>>1)))&7) + +/* A macro to return the offset between pixels in the output row for a pair of + * pixels in the input - effectively the inverse of the 'COL_SHIFT' macro that + * follows. Note that ROW_OFFSET is the offset from one row to the next whereas + * COL_OFFSET is from one column to the next, within a row. + */ +#define PNG_PASS_ROW_OFFSET(pass) ((pass)>2?(8>>(((pass)-1)>>1)):8) +#define PNG_PASS_COL_OFFSET(pass) (1<<((7-(pass))>>1)) + +/* Two macros to help evaluate the number of rows or columns in each + * pass. This is expressed as a shift - effectively log2 of the number or + * rows or columns in each 8x8 tile of the original image. + */ +#define PNG_PASS_ROW_SHIFT(pass) ((pass)>2?(8-(pass))>>1:3) +#define PNG_PASS_COL_SHIFT(pass) ((pass)>1?(7-(pass))>>1:3) + +/* Hence two macros to determine the number of rows or columns in a given + * pass of an image given its height or width. In fact these macros may + * return non-zero even though the sub-image is empty, because the other + * dimension may be empty for a small image. + */ +#define PNG_PASS_ROWS(height, pass) (((height)+(((1<>PNG_PASS_ROW_SHIFT(pass)) +#define PNG_PASS_COLS(width, pass) (((width)+(((1<>PNG_PASS_COL_SHIFT(pass)) + +/* For the reader row callbacks (both progressive and sequential) it is + * necessary to find the row in the output image given a row in an interlaced + * image, so two more macros: + */ +#define PNG_ROW_FROM_PASS_ROW(y_in, pass) \ + (((y_in)<>(((7-(off))-(pass))<<2)) & 0xF) | \ + ((0x01145AF0>>(((7-(off))-(pass))<<2)) & 0xF0)) + +#define PNG_ROW_IN_INTERLACE_PASS(y, pass) \ + ((PNG_PASS_MASK(pass,0) >> ((y)&7)) & 1) +#define PNG_COL_IN_INTERLACE_PASS(x, pass) \ + ((PNG_PASS_MASK(pass,1) >> ((x)&7)) & 1) + +#ifdef PNG_READ_COMPOSITE_NODIV_SUPPORTED +/* With these routines we avoid an integer divide, which will be slower on + * most machines. However, it does take more operations than the corresponding + * divide method, so it may be slower on a few RISC systems. There are two + * shifts (by 8 or 16 bits) and an addition, versus a single integer divide. + * + * Note that the rounding factors are NOT supposed to be the same! 128 and + * 32768 are correct for the NODIV code; 127 and 32767 are correct for the + * standard method. + * + * [Optimized code by Greg Roelofs and Mark Adler...blame us for bugs. :-) ] + */ + + /* fg and bg should be in `gamma 1.0' space; alpha is the opacity */ + +# define png_composite(composite, fg, alpha, bg) \ + { \ + png_uint_16 temp = (png_uint_16)((png_uint_16)(fg) \ + * (png_uint_16)(alpha) \ + + (png_uint_16)(bg)*(png_uint_16)(255 \ + - (png_uint_16)(alpha)) + 128); \ + (composite) = (png_byte)(((temp + (temp >> 8)) >> 8) & 0xff); \ + } + +# define png_composite_16(composite, fg, alpha, bg) \ + { \ + png_uint_32 temp = (png_uint_32)((png_uint_32)(fg) \ + * (png_uint_32)(alpha) \ + + (png_uint_32)(bg)*(65535 \ + - (png_uint_32)(alpha)) + 32768); \ + (composite) = (png_uint_16)(0xffff & ((temp + (temp >> 16)) >> 16)); \ + } + +#else /* Standard method using integer division */ + +# define png_composite(composite, fg, alpha, bg) \ + (composite) = \ + (png_byte)(0xff & (((png_uint_16)(fg) * (png_uint_16)(alpha) + \ + (png_uint_16)(bg) * (png_uint_16)(255 - (png_uint_16)(alpha)) + \ + 127) / 255)) + +# define png_composite_16(composite, fg, alpha, bg) \ + (composite) = \ + (png_uint_16)(0xffff & (((png_uint_32)(fg) * (png_uint_32)(alpha) + \ + (png_uint_32)(bg)*(png_uint_32)(65535 - (png_uint_32)(alpha)) + \ + 32767) / 65535)) +#endif /* READ_COMPOSITE_NODIV */ + +#ifdef PNG_READ_INT_FUNCTIONS_SUPPORTED +PNG_EXPORT(201, png_uint_32, png_get_uint_32, (png_const_bytep buf)); +PNG_EXPORT(202, png_uint_16, png_get_uint_16, (png_const_bytep buf)); +PNG_EXPORT(203, png_int_32, png_get_int_32, (png_const_bytep buf)); +#endif + +PNG_EXPORT(204, png_uint_32, png_get_uint_31, (png_const_structrp png_ptr, + png_const_bytep buf)); +/* No png_get_int_16 -- may be added if there's a real need for it. */ + +/* Place a 32-bit number into a buffer in PNG byte order (big-endian). */ +#ifdef PNG_WRITE_INT_FUNCTIONS_SUPPORTED +PNG_EXPORT(205, void, png_save_uint_32, (png_bytep buf, png_uint_32 i)); +#endif +#ifdef PNG_SAVE_INT_32_SUPPORTED +PNG_EXPORT(206, void, png_save_int_32, (png_bytep buf, png_int_32 i)); +#endif + +/* Place a 16-bit number into a buffer in PNG byte order. + * The parameter is declared unsigned int, not png_uint_16, + * just to avoid potential problems on pre-ANSI C compilers. + */ +#ifdef PNG_WRITE_INT_FUNCTIONS_SUPPORTED +PNG_EXPORT(207, void, png_save_uint_16, (png_bytep buf, unsigned int i)); +/* No png_save_int_16 -- may be added if there's a real need for it. */ +#endif + +#ifdef PNG_USE_READ_MACROS +/* Inline macros to do direct reads of bytes from the input buffer. + * The png_get_int_32() routine assumes we are using two's complement + * format for negative values, which is almost certainly true. + */ +# define PNG_get_uint_32(buf) \ + (((png_uint_32)(*(buf)) << 24) + \ + ((png_uint_32)(*((buf) + 1)) << 16) + \ + ((png_uint_32)(*((buf) + 2)) << 8) + \ + ((png_uint_32)(*((buf) + 3)))) + + /* From libpng-1.4.0 until 1.4.4, the png_get_uint_16 macro (but not the + * function) incorrectly returned a value of type png_uint_32. + */ +# define PNG_get_uint_16(buf) \ + ((png_uint_16) \ + (((unsigned int)(*(buf)) << 8) + \ + ((unsigned int)(*((buf) + 1))))) + +# define PNG_get_int_32(buf) \ + ((png_int_32)((*(buf) & 0x80) \ + ? -((png_int_32)(((png_get_uint_32(buf)^0xffffffffU)+1U)&0x7fffffffU)) \ + : (png_int_32)png_get_uint_32(buf))) + +/* If PNG_PREFIX is defined the same thing as below happens in pnglibconf.h, + * but defining a macro name prefixed with PNG_PREFIX. + */ +# ifndef PNG_PREFIX +# define png_get_uint_32(buf) PNG_get_uint_32(buf) +# define png_get_uint_16(buf) PNG_get_uint_16(buf) +# define png_get_int_32(buf) PNG_get_int_32(buf) +# endif +#else +# ifdef PNG_PREFIX + /* No macros; revert to the (redefined) function */ +# define PNG_get_uint_32 (png_get_uint_32) +# define PNG_get_uint_16 (png_get_uint_16) +# define PNG_get_int_32 (png_get_int_32) +# endif +#endif + +#ifdef PNG_CHECK_FOR_INVALID_INDEX_SUPPORTED +PNG_EXPORT(242, void, png_set_check_for_invalid_index, + (png_structrp png_ptr, int allowed)); +# ifdef PNG_GET_PALETTE_MAX_SUPPORTED +PNG_EXPORT(243, int, png_get_palette_max, (png_const_structp png_ptr, + png_const_infop info_ptr)); +# endif +#endif /* CHECK_FOR_INVALID_INDEX */ + +/******************************************************************************* + * Section 5: SIMPLIFIED API + ******************************************************************************* + * + * Please read the documentation in libpng-manual.txt (TODO: write said + * documentation) if you don't understand what follows. + * + * The simplified API hides the details of both libpng and the PNG file format + * itself. It allows PNG files to be read into a very limited number of + * in-memory bitmap formats or to be written from the same formats. If these + * formats do not accommodate your needs then you can, and should, use the more + * sophisticated APIs above - these support a wide variety of in-memory formats + * and a wide variety of sophisticated transformations to those formats as well + * as a wide variety of APIs to manipulate ancillary information. + * + * To read a PNG file using the simplified API: + * + * 1) Declare a 'png_image' structure (see below) on the stack, set the + * version field to PNG_IMAGE_VERSION and the 'opaque' pointer to NULL + * (this is REQUIRED, your program may crash if you don't do it.) + * 2) Call the appropriate png_image_begin_read... function. + * 3) Set the png_image 'format' member to the required sample format. + * 4) Allocate a buffer for the image and, if required, the color-map. + * 5) Call png_image_finish_read to read the image and, if required, the + * color-map into your buffers. + * + * There are no restrictions on the format of the PNG input itself; all valid + * color types, bit depths, and interlace methods are acceptable, and the + * input image is transformed as necessary to the requested in-memory format + * during the png_image_finish_read() step. The only caveat is that if you + * request a color-mapped image from a PNG that is full-color or makes + * complex use of an alpha channel the transformation is extremely lossy and the + * result may look terrible. + * + * To write a PNG file using the simplified API: + * + * 1) Declare a 'png_image' structure on the stack and memset() it to all zero. + * 2) Initialize the members of the structure that describe the image, setting + * the 'format' member to the format of the image samples. + * 3) Call the appropriate png_image_write... function with a pointer to the + * image and, if necessary, the color-map to write the PNG data. + * + * png_image is a structure that describes the in-memory format of an image + * when it is being read or defines the in-memory format of an image that you + * need to write: + */ +#if defined(PNG_SIMPLIFIED_READ_SUPPORTED) || \ + defined(PNG_SIMPLIFIED_WRITE_SUPPORTED) + +#define PNG_IMAGE_VERSION 1 + +typedef struct png_control *png_controlp; +typedef struct +{ + png_controlp opaque; /* Initialize to NULL, free with png_image_free */ + png_uint_32 version; /* Set to PNG_IMAGE_VERSION */ + png_uint_32 width; /* Image width in pixels (columns) */ + png_uint_32 height; /* Image height in pixels (rows) */ + png_uint_32 format; /* Image format as defined below */ + png_uint_32 flags; /* A bit mask containing informational flags */ + png_uint_32 colormap_entries; + /* Number of entries in the color-map */ + + /* In the event of an error or warning the following field will be set to a + * non-zero value and the 'message' field will contain a '\0' terminated + * string with the libpng error or warning message. If both warnings and + * an error were encountered, only the error is recorded. If there + * are multiple warnings, only the first one is recorded. + * + * The upper 30 bits of this value are reserved, the low two bits contain + * a value as follows: + */ +# define PNG_IMAGE_WARNING 1 +# define PNG_IMAGE_ERROR 2 + /* + * The result is a two-bit code such that a value more than 1 indicates + * a failure in the API just called: + * + * 0 - no warning or error + * 1 - warning + * 2 - error + * 3 - error preceded by warning + */ +# define PNG_IMAGE_FAILED(png_cntrl) ((((png_cntrl).warning_or_error)&0x03)>1) + + png_uint_32 warning_or_error; + + char message[64]; +} png_image, *png_imagep; + +/* The samples of the image have one to four channels whose components have + * original values in the range 0 to 1.0: + * + * 1: A single gray or luminance channel (G). + * 2: A gray/luminance channel and an alpha channel (GA). + * 3: Three red, green, blue color channels (RGB). + * 4: Three color channels and an alpha channel (RGBA). + * + * The components are encoded in one of two ways: + * + * a) As a small integer, value 0..255, contained in a single byte. For the + * alpha channel the original value is simply value/255. For the color or + * luminance channels the value is encoded according to the sRGB specification + * and matches the 8-bit format expected by typical display devices. + * + * The color/gray channels are not scaled (pre-multiplied) by the alpha + * channel and are suitable for passing to color management software. + * + * b) As a value in the range 0..65535, contained in a 2-byte integer. All + * channels can be converted to the original value by dividing by 65535; all + * channels are linear. Color channels use the RGB encoding (RGB end-points) of + * the sRGB specification. This encoding is identified by the + * PNG_FORMAT_FLAG_LINEAR flag below. + * + * When the simplified API needs to convert between sRGB and linear colorspaces, + * the actual sRGB transfer curve defined in the sRGB specification (see the + * article at ) is used, not the gamma=1/2.2 + * approximation used elsewhere in libpng. + * + * When an alpha channel is present it is expected to denote pixel coverage + * of the color or luminance channels and is returned as an associated alpha + * channel: the color/gray channels are scaled (pre-multiplied) by the alpha + * value. + * + * The samples are either contained directly in the image data, between 1 and 8 + * bytes per pixel according to the encoding, or are held in a color-map indexed + * by bytes in the image data. In the case of a color-map the color-map entries + * are individual samples, encoded as above, and the image data has one byte per + * pixel to select the relevant sample from the color-map. + */ + +/* PNG_FORMAT_* + * + * #defines to be used in png_image::format. Each #define identifies a + * particular layout of sample data and, if present, alpha values. There are + * separate defines for each of the two component encodings. + * + * A format is built up using single bit flag values. All combinations are + * valid. Formats can be built up from the flag values or you can use one of + * the predefined values below. When testing formats always use the FORMAT_FLAG + * macros to test for individual features - future versions of the library may + * add new flags. + * + * When reading or writing color-mapped images the format should be set to the + * format of the entries in the color-map then png_image_{read,write}_colormap + * called to read or write the color-map and set the format correctly for the + * image data. Do not set the PNG_FORMAT_FLAG_COLORMAP bit directly! + * + * NOTE: libpng can be built with particular features disabled. If you see + * compiler errors because the definition of one of the following flags has been + * compiled out it is because libpng does not have the required support. It is + * possible, however, for the libpng configuration to enable the format on just + * read or just write; in that case you may see an error at run time. You can + * guard against this by checking for the definition of the appropriate + * "_SUPPORTED" macro, one of: + * + * PNG_SIMPLIFIED_{READ,WRITE}_{BGR,AFIRST}_SUPPORTED + */ +#define PNG_FORMAT_FLAG_ALPHA 0x01U /* format with an alpha channel */ +#define PNG_FORMAT_FLAG_COLOR 0x02U /* color format: otherwise grayscale */ +#define PNG_FORMAT_FLAG_LINEAR 0x04U /* 2-byte channels else 1-byte */ +#define PNG_FORMAT_FLAG_COLORMAP 0x08U /* image data is color-mapped */ + +#ifdef PNG_FORMAT_BGR_SUPPORTED +# define PNG_FORMAT_FLAG_BGR 0x10U /* BGR colors, else order is RGB */ +#endif + +#ifdef PNG_FORMAT_AFIRST_SUPPORTED +# define PNG_FORMAT_FLAG_AFIRST 0x20U /* alpha channel comes first */ +#endif + +#define PNG_FORMAT_FLAG_ASSOCIATED_ALPHA 0x40U /* alpha channel is associated */ + +/* Commonly used formats have predefined macros. + * + * First the single byte (sRGB) formats: + */ +#define PNG_FORMAT_GRAY 0 +#define PNG_FORMAT_GA PNG_FORMAT_FLAG_ALPHA +#define PNG_FORMAT_AG (PNG_FORMAT_GA|PNG_FORMAT_FLAG_AFIRST) +#define PNG_FORMAT_RGB PNG_FORMAT_FLAG_COLOR +#define PNG_FORMAT_BGR (PNG_FORMAT_FLAG_COLOR|PNG_FORMAT_FLAG_BGR) +#define PNG_FORMAT_RGBA (PNG_FORMAT_RGB|PNG_FORMAT_FLAG_ALPHA) +#define PNG_FORMAT_ARGB (PNG_FORMAT_RGBA|PNG_FORMAT_FLAG_AFIRST) +#define PNG_FORMAT_BGRA (PNG_FORMAT_BGR|PNG_FORMAT_FLAG_ALPHA) +#define PNG_FORMAT_ABGR (PNG_FORMAT_BGRA|PNG_FORMAT_FLAG_AFIRST) + +/* Then the linear 2-byte formats. When naming these "Y" is used to + * indicate a luminance (gray) channel. + */ +#define PNG_FORMAT_LINEAR_Y PNG_FORMAT_FLAG_LINEAR +#define PNG_FORMAT_LINEAR_Y_ALPHA (PNG_FORMAT_FLAG_LINEAR|PNG_FORMAT_FLAG_ALPHA) +#define PNG_FORMAT_LINEAR_RGB (PNG_FORMAT_FLAG_LINEAR|PNG_FORMAT_FLAG_COLOR) +#define PNG_FORMAT_LINEAR_RGB_ALPHA \ + (PNG_FORMAT_FLAG_LINEAR|PNG_FORMAT_FLAG_COLOR|PNG_FORMAT_FLAG_ALPHA) + +/* With color-mapped formats the image data is one byte for each pixel, the byte + * is an index into the color-map which is formatted as above. To obtain a + * color-mapped format it is sufficient just to add the PNG_FOMAT_FLAG_COLORMAP + * to one of the above definitions, or you can use one of the definitions below. + */ +#define PNG_FORMAT_RGB_COLORMAP (PNG_FORMAT_RGB|PNG_FORMAT_FLAG_COLORMAP) +#define PNG_FORMAT_BGR_COLORMAP (PNG_FORMAT_BGR|PNG_FORMAT_FLAG_COLORMAP) +#define PNG_FORMAT_RGBA_COLORMAP (PNG_FORMAT_RGBA|PNG_FORMAT_FLAG_COLORMAP) +#define PNG_FORMAT_ARGB_COLORMAP (PNG_FORMAT_ARGB|PNG_FORMAT_FLAG_COLORMAP) +#define PNG_FORMAT_BGRA_COLORMAP (PNG_FORMAT_BGRA|PNG_FORMAT_FLAG_COLORMAP) +#define PNG_FORMAT_ABGR_COLORMAP (PNG_FORMAT_ABGR|PNG_FORMAT_FLAG_COLORMAP) + +/* PNG_IMAGE macros + * + * These are convenience macros to derive information from a png_image + * structure. The PNG_IMAGE_SAMPLE_ macros return values appropriate to the + * actual image sample values - either the entries in the color-map or the + * pixels in the image. The PNG_IMAGE_PIXEL_ macros return corresponding values + * for the pixels and will always return 1 for color-mapped formats. The + * remaining macros return information about the rows in the image and the + * complete image. + * + * NOTE: All the macros that take a png_image::format parameter are compile time + * constants if the format parameter is, itself, a constant. Therefore these + * macros can be used in array declarations and case labels where required. + * Similarly the macros are also pre-processor constants (sizeof is not used) so + * they can be used in #if tests. + * + * First the information about the samples. + */ +#define PNG_IMAGE_SAMPLE_CHANNELS(fmt)\ + (((fmt)&(PNG_FORMAT_FLAG_COLOR|PNG_FORMAT_FLAG_ALPHA))+1) + /* Return the total number of channels in a given format: 1..4 */ + +#define PNG_IMAGE_SAMPLE_COMPONENT_SIZE(fmt)\ + ((((fmt) & PNG_FORMAT_FLAG_LINEAR) >> 2)+1) + /* Return the size in bytes of a single component of a pixel or color-map + * entry (as appropriate) in the image: 1 or 2. + */ + +#define PNG_IMAGE_SAMPLE_SIZE(fmt)\ + (PNG_IMAGE_SAMPLE_CHANNELS(fmt) * PNG_IMAGE_SAMPLE_COMPONENT_SIZE(fmt)) + /* This is the size of the sample data for one sample. If the image is + * color-mapped it is the size of one color-map entry (and image pixels are + * one byte in size), otherwise it is the size of one image pixel. + */ + +#define PNG_IMAGE_MAXIMUM_COLORMAP_COMPONENTS(fmt)\ + (PNG_IMAGE_SAMPLE_CHANNELS(fmt) * 256) + /* The maximum size of the color-map required by the format expressed in a + * count of components. This can be used to compile-time allocate a + * color-map: + * + * png_uint_16 colormap[PNG_IMAGE_MAXIMUM_COLORMAP_COMPONENTS(linear_fmt)]; + * + * png_byte colormap[PNG_IMAGE_MAXIMUM_COLORMAP_COMPONENTS(sRGB_fmt)]; + * + * Alternatively use the PNG_IMAGE_COLORMAP_SIZE macro below to use the + * information from one of the png_image_begin_read_ APIs and dynamically + * allocate the required memory. + */ + +/* Corresponding information about the pixels */ +#define PNG_IMAGE_PIXEL_(test,fmt)\ + (((fmt)&PNG_FORMAT_FLAG_COLORMAP)?1:test(fmt)) + +#define PNG_IMAGE_PIXEL_CHANNELS(fmt)\ + PNG_IMAGE_PIXEL_(PNG_IMAGE_SAMPLE_CHANNELS,fmt) + /* The number of separate channels (components) in a pixel; 1 for a + * color-mapped image. + */ + +#define PNG_IMAGE_PIXEL_COMPONENT_SIZE(fmt)\ + PNG_IMAGE_PIXEL_(PNG_IMAGE_SAMPLE_COMPONENT_SIZE,fmt) + /* The size, in bytes, of each component in a pixel; 1 for a color-mapped + * image. + */ + +#define PNG_IMAGE_PIXEL_SIZE(fmt) PNG_IMAGE_PIXEL_(PNG_IMAGE_SAMPLE_SIZE,fmt) + /* The size, in bytes, of a complete pixel; 1 for a color-mapped image. */ + +/* Information about the whole row, or whole image */ +#define PNG_IMAGE_ROW_STRIDE(image)\ + (PNG_IMAGE_PIXEL_CHANNELS((image).format) * (image).width) + /* Return the total number of components in a single row of the image; this + * is the minimum 'row stride', the minimum count of components between each + * row. For a color-mapped image this is the minimum number of bytes in a + * row. + * + * WARNING: this macro overflows for some images with more than one component + * and very large image widths. libpng will refuse to process an image where + * this macro would overflow. + */ + +#define PNG_IMAGE_BUFFER_SIZE(image, row_stride)\ + (PNG_IMAGE_PIXEL_COMPONENT_SIZE((image).format)*(image).height*(row_stride)) + /* Return the size, in bytes, of an image buffer given a png_image and a row + * stride - the number of components to leave space for in each row. + * + * WARNING: this macro overflows a 32-bit integer for some large PNG images, + * libpng will refuse to process an image where such an overflow would occur. + */ + +#define PNG_IMAGE_SIZE(image)\ + PNG_IMAGE_BUFFER_SIZE(image, PNG_IMAGE_ROW_STRIDE(image)) + /* Return the size, in bytes, of the image in memory given just a png_image; + * the row stride is the minimum stride required for the image. + */ + +#define PNG_IMAGE_COLORMAP_SIZE(image)\ + (PNG_IMAGE_SAMPLE_SIZE((image).format) * (image).colormap_entries) + /* Return the size, in bytes, of the color-map of this image. If the image + * format is not a color-map format this will return a size sufficient for + * 256 entries in the given format; check PNG_FORMAT_FLAG_COLORMAP if + * you don't want to allocate a color-map in this case. + */ + +/* PNG_IMAGE_FLAG_* + * + * Flags containing additional information about the image are held in the + * 'flags' field of png_image. + */ +#define PNG_IMAGE_FLAG_COLORSPACE_NOT_sRGB 0x01 + /* This indicates that the RGB values of the in-memory bitmap do not + * correspond to the red, green and blue end-points defined by sRGB. + */ + +#define PNG_IMAGE_FLAG_FAST 0x02 + /* On write emphasise speed over compression; the resultant PNG file will be + * larger but will be produced significantly faster, particular for large + * images. Do not use this option for images which will be distributed, only + * used it when producing intermediate files that will be read back in + * repeatedly. For a typical 24-bit image the option will double the read + * speed at the cost of increasing the image size by 25%, however for many + * more compressible images the PNG file can be 10 times larger with only a + * slight speed gain. + */ + +#define PNG_IMAGE_FLAG_16BIT_sRGB 0x04 + /* On read if the image is a 16-bit per component image and there is no gAMA + * or sRGB chunk assume that the components are sRGB encoded. Notice that + * images output by the simplified API always have gamma information; setting + * this flag only affects the interpretation of 16-bit images from an + * external source. It is recommended that the application expose this flag + * to the user; the user can normally easily recognize the difference between + * linear and sRGB encoding. This flag has no effect on write - the data + * passed to the write APIs must have the correct encoding (as defined + * above.) + * + * If the flag is not set (the default) input 16-bit per component data is + * assumed to be linear. + * + * NOTE: the flag can only be set after the png_image_begin_read_ call, + * because that call initializes the 'flags' field. + */ + +#ifdef PNG_SIMPLIFIED_READ_SUPPORTED +/* READ APIs + * --------- + * + * The png_image passed to the read APIs must have been initialized by setting + * the png_controlp field 'opaque' to NULL (or, safer, memset the whole thing.) + */ +#ifdef PNG_STDIO_SUPPORTED +PNG_EXPORT(234, int, png_image_begin_read_from_file, (png_imagep image, + const char *file_name)); + /* The named file is opened for read and the image header is filled in + * from the PNG header in the file. + */ + +PNG_EXPORT(235, int, png_image_begin_read_from_stdio, (png_imagep image, + FILE* file)); + /* The PNG header is read from the stdio FILE object. */ +#endif /* STDIO */ + +PNG_EXPORT(236, int, png_image_begin_read_from_memory, (png_imagep image, + png_const_voidp memory, size_t size)); + /* The PNG header is read from the given memory buffer. */ + +PNG_EXPORT(237, int, png_image_finish_read, (png_imagep image, + png_const_colorp background, void *buffer, png_int_32 row_stride, + void *colormap)); + /* Finish reading the image into the supplied buffer and clean up the + * png_image structure. + * + * row_stride is the step, in byte or 2-byte units as appropriate, + * between adjacent rows. A positive stride indicates that the top-most row + * is first in the buffer - the normal top-down arrangement. A negative + * stride indicates that the bottom-most row is first in the buffer. + * + * background need only be supplied if an alpha channel must be removed from + * a png_byte format and the removal is to be done by compositing on a solid + * color; otherwise it may be NULL and any composition will be done directly + * onto the buffer. The value is an sRGB color to use for the background, + * for grayscale output the green channel is used. + * + * background must be supplied when an alpha channel must be removed from a + * single byte color-mapped output format, in other words if: + * + * 1) The original format from png_image_begin_read_from_* had + * PNG_FORMAT_FLAG_ALPHA set. + * 2) The format set by the application does not. + * 3) The format set by the application has PNG_FORMAT_FLAG_COLORMAP set and + * PNG_FORMAT_FLAG_LINEAR *not* set. + * + * For linear output removing the alpha channel is always done by compositing + * on black and background is ignored. + * + * colormap must be supplied when PNG_FORMAT_FLAG_COLORMAP is set. It must + * be at least the size (in bytes) returned by PNG_IMAGE_COLORMAP_SIZE. + * image->colormap_entries will be updated to the actual number of entries + * written to the colormap; this may be less than the original value. + */ + +PNG_EXPORT(238, void, png_image_free, (png_imagep image)); + /* Free any data allocated by libpng in image->opaque, setting the pointer to + * NULL. May be called at any time after the structure is initialized. + */ +#endif /* SIMPLIFIED_READ */ + +#ifdef PNG_SIMPLIFIED_WRITE_SUPPORTED +/* WRITE APIS + * ---------- + * For write you must initialize a png_image structure to describe the image to + * be written. To do this use memset to set the whole structure to 0 then + * initialize fields describing your image. + * + * version: must be set to PNG_IMAGE_VERSION + * opaque: must be initialized to NULL + * width: image width in pixels + * height: image height in rows + * format: the format of the data (image and color-map) you wish to write + * flags: set to 0 unless one of the defined flags applies; set + * PNG_IMAGE_FLAG_COLORSPACE_NOT_sRGB for color format images where the RGB + * values do not correspond to the colors in sRGB. + * colormap_entries: set to the number of entries in the color-map (0 to 256) + */ +#ifdef PNG_SIMPLIFIED_WRITE_STDIO_SUPPORTED +PNG_EXPORT(239, int, png_image_write_to_file, (png_imagep image, + const char *file, int convert_to_8bit, const void *buffer, + png_int_32 row_stride, const void *colormap)); + /* Write the image to the named file. */ + +PNG_EXPORT(240, int, png_image_write_to_stdio, (png_imagep image, FILE *file, + int convert_to_8_bit, const void *buffer, png_int_32 row_stride, + const void *colormap)); + /* Write the image to the given (FILE*). */ +#endif /* SIMPLIFIED_WRITE_STDIO */ + +/* With all write APIs if image is in one of the linear formats with 16-bit + * data then setting convert_to_8_bit will cause the output to be an 8-bit PNG + * gamma encoded according to the sRGB specification, otherwise a 16-bit linear + * encoded PNG file is written. + * + * With color-mapped data formats the colormap parameter point to a color-map + * with at least image->colormap_entries encoded in the specified format. If + * the format is linear the written PNG color-map will be converted to sRGB + * regardless of the convert_to_8_bit flag. + * + * With all APIs row_stride is handled as in the read APIs - it is the spacing + * from one row to the next in component sized units (1 or 2 bytes) and if + * negative indicates a bottom-up row layout in the buffer. If row_stride is + * zero, libpng will calculate it for you from the image width and number of + * channels. + * + * Note that the write API does not support interlacing, sub-8-bit pixels or + * most ancillary chunks. If you need to write text chunks (e.g. for copyright + * notices) you need to use one of the other APIs. + */ + +PNG_EXPORT(245, int, png_image_write_to_memory, (png_imagep image, void *memory, + png_alloc_size_t * PNG_RESTRICT memory_bytes, int convert_to_8_bit, + const void *buffer, png_int_32 row_stride, const void *colormap)); + /* Write the image to the given memory buffer. The function both writes the + * whole PNG data stream to *memory and updates *memory_bytes with the count + * of bytes written. + * + * 'memory' may be NULL. In this case *memory_bytes is not read however on + * success the number of bytes which would have been written will still be + * stored in *memory_bytes. On failure *memory_bytes will contain 0. + * + * If 'memory' is not NULL it must point to memory[*memory_bytes] of + * writeable memory. + * + * If the function returns success memory[*memory_bytes] (if 'memory' is not + * NULL) contains the written PNG data. *memory_bytes will always be less + * than or equal to the original value. + * + * If the function returns false and *memory_bytes was not changed an error + * occurred during write. If *memory_bytes was changed, or is not 0 if + * 'memory' was NULL, the write would have succeeded but for the memory + * buffer being too small. *memory_bytes contains the required number of + * bytes and will be bigger that the original value. + */ + +#define png_image_write_get_memory_size(image, size, convert_to_8_bit, buffer,\ + row_stride, colormap)\ + png_image_write_to_memory(&(image), 0, &(size), convert_to_8_bit, buffer,\ + row_stride, colormap) + /* Return the amount of memory in 'size' required to compress this image. + * The png_image structure 'image' must be filled in as in the above + * function and must not be changed before the actual write call, the buffer + * and all other parameters must also be identical to that in the final + * write call. The 'size' variable need not be initialized. + * + * NOTE: the macro returns true/false, if false is returned 'size' will be + * set to zero and the write failed and probably will fail if tried again. + */ + +/* You can pre-allocate the buffer by making sure it is of sufficient size + * regardless of the amount of compression achieved. The buffer size will + * always be bigger than the original image and it will never be filled. The + * following macros are provided to assist in allocating the buffer. + */ +#define PNG_IMAGE_DATA_SIZE(image) (PNG_IMAGE_SIZE(image)+(image).height) + /* The number of uncompressed bytes in the PNG byte encoding of the image; + * uncompressing the PNG IDAT data will give this number of bytes. + * + * NOTE: while PNG_IMAGE_SIZE cannot overflow for an image in memory this + * macro can because of the extra bytes used in the PNG byte encoding. You + * need to avoid this macro if your image size approaches 2^30 in width or + * height. The same goes for the remainder of these macros; they all produce + * bigger numbers than the actual in-memory image size. + */ +#ifndef PNG_ZLIB_MAX_SIZE +# define PNG_ZLIB_MAX_SIZE(b) ((b)+(((b)+7U)>>3)+(((b)+63U)>>6)+11U) + /* An upper bound on the number of compressed bytes given 'b' uncompressed + * bytes. This is based on deflateBounds() in zlib; different + * implementations of zlib compression may conceivably produce more data so + * if your zlib implementation is not zlib itself redefine this macro + * appropriately. + */ +#endif + +#define PNG_IMAGE_COMPRESSED_SIZE_MAX(image)\ + PNG_ZLIB_MAX_SIZE((png_alloc_size_t)PNG_IMAGE_DATA_SIZE(image)) + /* An upper bound on the size of the data in the PNG IDAT chunks. */ + +#define PNG_IMAGE_PNG_SIZE_MAX_(image, image_size)\ + ((8U/*sig*/+25U/*IHDR*/+16U/*gAMA*/+44U/*cHRM*/+12U/*IEND*/+\ + (((image).format&PNG_FORMAT_FLAG_COLORMAP)?/*colormap: PLTE, tRNS*/\ + 12U+3U*(image).colormap_entries/*PLTE data*/+\ + (((image).format&PNG_FORMAT_FLAG_ALPHA)?\ + 12U/*tRNS*/+(image).colormap_entries:0U):0U)+\ + 12U)+(12U*((image_size)/PNG_ZBUF_SIZE))/*IDAT*/+(image_size)) + /* A helper for the following macro; if your compiler cannot handle the + * following macro use this one with the result of + * PNG_IMAGE_COMPRESSED_SIZE_MAX(image) as the second argument (most + * compilers should handle this just fine.) + */ + +#define PNG_IMAGE_PNG_SIZE_MAX(image)\ + PNG_IMAGE_PNG_SIZE_MAX_(image, PNG_IMAGE_COMPRESSED_SIZE_MAX(image)) + /* An upper bound on the total length of the PNG data stream for 'image'. + * The result is of type png_alloc_size_t, on 32-bit systems this may + * overflow even though PNG_IMAGE_DATA_SIZE does not overflow; the write will + * run out of buffer space but return a corrected size which should work. + */ +#endif /* SIMPLIFIED_WRITE */ +/******************************************************************************* + * END OF SIMPLIFIED API + ******************************************************************************/ +#endif /* SIMPLIFIED_{READ|WRITE} */ + +/******************************************************************************* + * Section 6: IMPLEMENTATION OPTIONS + ******************************************************************************* + * + * Support for arbitrary implementation-specific optimizations. The API allows + * particular options to be turned on or off. 'Option' is the number of the + * option and 'onoff' is 0 (off) or non-0 (on). The value returned is given + * by the PNG_OPTION_ defines below. + * + * HARDWARE: normally hardware capabilities, such as the Intel SSE instructions, + * are detected at run time, however sometimes it may be impossible + * to do this in user mode, in which case it is necessary to discover + * the capabilities in an OS specific way. Such capabilities are + * listed here when libpng has support for them and must be turned + * ON by the application if present. + * + * SOFTWARE: sometimes software optimizations actually result in performance + * decrease on some architectures or systems, or with some sets of + * PNG images. 'Software' options allow such optimizations to be + * selected at run time. + */ +#ifdef PNG_SET_OPTION_SUPPORTED +#ifdef PNG_ARM_NEON_API_SUPPORTED +# define PNG_ARM_NEON 0 /* HARDWARE: ARM Neon SIMD instructions supported */ +#endif +#define PNG_MAXIMUM_INFLATE_WINDOW 2 /* SOFTWARE: force maximum window */ +#define PNG_SKIP_sRGB_CHECK_PROFILE 4 /* SOFTWARE: Check ICC profile for sRGB */ +#ifdef PNG_MIPS_MSA_API_SUPPORTED +# define PNG_MIPS_MSA 6 /* HARDWARE: MIPS Msa SIMD instructions supported */ +#endif +#ifdef PNG_DISABLE_ADLER32_CHECK_SUPPORTED +# define PNG_IGNORE_ADLER32 8 /* SOFTWARE: disable Adler32 check on IDAT */ +#endif +#ifdef PNG_POWERPC_VSX_API_SUPPORTED +# define PNG_POWERPC_VSX 10 /* HARDWARE: PowerPC VSX SIMD instructions + * supported */ +#endif +#ifdef PNG_MIPS_MMI_API_SUPPORTED +# define PNG_MIPS_MMI 12 /* HARDWARE: MIPS MMI SIMD instructions supported */ +#endif + +#define PNG_OPTION_NEXT 14 /* Next option - numbers must be even */ + +/* Return values: NOTE: there are four values and 'off' is *not* zero */ +#define PNG_OPTION_UNSET 0 /* Unset - defaults to off */ +#define PNG_OPTION_INVALID 1 /* Option number out of range */ +#define PNG_OPTION_OFF 2 +#define PNG_OPTION_ON 3 + +PNG_EXPORT(244, int, png_set_option, (png_structrp png_ptr, int option, + int onoff)); +#endif /* SET_OPTION */ + +/******************************************************************************* + * END OF HARDWARE AND SOFTWARE OPTIONS + ******************************************************************************/ + +/* Maintainer: Put new public prototypes here ^, in libpng.3, in project + * defs, and in scripts/symbols.def. + */ + +/* The last ordinal number (this is the *last* one already used; the next + * one to use is one more than this.) + */ +#ifdef PNG_EXPORT_LAST_ORDINAL + PNG_EXPORT_LAST_ORDINAL(259); +#endif + +#ifdef __cplusplus +} +#endif + +#endif /* PNG_VERSION_INFO_ONLY */ +/* Do not put anything past this line */ +#endif /* PNG_H */ diff --git a/dependencies/linux64/include/libpng16/pngconf.h b/dependencies/linux64/include/libpng16/pngconf.h new file mode 100644 index 0000000..42fa973 --- /dev/null +++ b/dependencies/linux64/include/libpng16/pngconf.h @@ -0,0 +1,622 @@ +/* pngconf.h - machine-configurable file for libpng + * + * libpng version 1.6.47 + * + * Copyright (c) 2018-2025 Cosmin Truta + * Copyright (c) 1998-2002,2004,2006-2016,2018 Glenn Randers-Pehrson + * Copyright (c) 1996-1997 Andreas Dilger + * Copyright (c) 1995-1996 Guy Eric Schalnat, Group 42, Inc. + * + * This code is released under the libpng license. + * For conditions of distribution and use, see the disclaimer + * and license in png.h + * + * Any machine specific code is near the front of this file, so if you + * are configuring libpng for a machine, you may want to read the section + * starting here down to where it starts to typedef png_color, png_text, + * and png_info. + */ + +#ifndef PNGCONF_H +#define PNGCONF_H + +#ifndef PNG_BUILDING_SYMBOL_TABLE /* else includes may cause problems */ + +/* From libpng 1.6.0 libpng requires an ANSI X3.159-1989 ("ISOC90") compliant C + * compiler for correct compilation. The following header files are required by + * the standard. If your compiler doesn't provide these header files, or they + * do not match the standard, you will need to provide/improve them. + */ +#include +#include + +/* Library header files. These header files are all defined by ISOC90; libpng + * expects conformant implementations, however, an ISOC90 conformant system need + * not provide these header files if the functionality cannot be implemented. + * In this case it will be necessary to disable the relevant parts of libpng in + * the build of pnglibconf.h. + * + * Prior to 1.6.0 string.h was included here; the API changes in 1.6.0 to not + * include this unnecessary header file. + */ + +#ifdef PNG_STDIO_SUPPORTED + /* Required for the definition of FILE: */ +# include +#endif + +#ifdef PNG_SETJMP_SUPPORTED + /* Required for the definition of jmp_buf and the declaration of longjmp: */ +# include +#endif + +#ifdef PNG_CONVERT_tIME_SUPPORTED + /* Required for struct tm: */ +# include +#endif + +#endif /* PNG_BUILDING_SYMBOL_TABLE */ + +/* Prior to 1.6.0, it was possible to turn off 'const' in declarations, + * using PNG_NO_CONST. This is no longer supported. + */ +#define PNG_CONST const /* backward compatibility only */ + +/* This controls optimization of the reading of 16-bit and 32-bit + * values from PNG files. It can be set on a per-app-file basis: it + * just changes whether a macro is used when the function is called. + * The library builder sets the default; if read functions are not + * built into the library the macro implementation is forced on. + */ +#ifndef PNG_READ_INT_FUNCTIONS_SUPPORTED +# define PNG_USE_READ_MACROS +#endif +#if !defined(PNG_NO_USE_READ_MACROS) && !defined(PNG_USE_READ_MACROS) +# if PNG_DEFAULT_READ_MACROS +# define PNG_USE_READ_MACROS +# endif +#endif + +/* COMPILER SPECIFIC OPTIONS. + * + * These options are provided so that a variety of difficult compilers + * can be used. Some are fixed at build time (e.g. PNG_API_RULE + * below) but still have compiler specific implementations, others + * may be changed on a per-file basis when compiling against libpng. + */ + +/* The PNGARG macro was used in versions of libpng prior to 1.6.0 to protect + * against legacy (pre ISOC90) compilers that did not understand function + * prototypes. [Deprecated.] + */ +#ifndef PNGARG +# define PNGARG(arglist) arglist +#endif + +/* Function calling conventions. + * ============================= + * Normally it is not necessary to specify to the compiler how to call + * a function - it just does it - however on x86 systems derived from + * Microsoft and Borland C compilers ('IBM PC', 'DOS', 'Windows' systems + * and some others) there are multiple ways to call a function and the + * default can be changed on the compiler command line. For this reason + * libpng specifies the calling convention of every exported function and + * every function called via a user supplied function pointer. This is + * done in this file by defining the following macros: + * + * PNGAPI Calling convention for exported functions. + * PNGCBAPI Calling convention for user provided (callback) functions. + * PNGCAPI Calling convention used by the ANSI-C library (required + * for longjmp callbacks and sometimes used internally to + * specify the calling convention for zlib). + * + * These macros should never be overridden. If it is necessary to + * change calling convention in a private build this can be done + * by setting PNG_API_RULE (which defaults to 0) to one of the values + * below to select the correct 'API' variants. + * + * PNG_API_RULE=0 Use PNGCAPI - the 'C' calling convention - throughout. + * This is correct in every known environment. + * PNG_API_RULE=1 Use the operating system convention for PNGAPI and + * the 'C' calling convention (from PNGCAPI) for + * callbacks (PNGCBAPI). This is no longer required + * in any known environment - if it has to be used + * please post an explanation of the problem to the + * libpng mailing list. + * + * These cases only differ if the operating system does not use the C + * calling convention, at present this just means the above cases + * (x86 DOS/Windows systems) and, even then, this does not apply to + * Cygwin running on those systems. + * + * Note that the value must be defined in pnglibconf.h so that what + * the application uses to call the library matches the conventions + * set when building the library. + */ + +/* Symbol export + * ============= + * When building a shared library it is almost always necessary to tell + * the compiler which symbols to export. The png.h macro 'PNG_EXPORT' + * is used to mark the symbols. On some systems these symbols can be + * extracted at link time and need no special processing by the compiler, + * on other systems the symbols are flagged by the compiler and just + * the declaration requires a special tag applied (unfortunately) in a + * compiler dependent way. Some systems can do either. + * + * A small number of older systems also require a symbol from a DLL to + * be flagged to the program that calls it. This is a problem because + * we do not know in the header file included by application code that + * the symbol will come from a shared library, as opposed to a statically + * linked one. For this reason the application must tell us by setting + * the magic flag PNG_USE_DLL to turn on the special processing before + * it includes png.h. + * + * Four additional macros are used to make this happen: + * + * PNG_IMPEXP The magic (if any) to cause a symbol to be exported from + * the build or imported if PNG_USE_DLL is set - compiler + * and system specific. + * + * PNG_EXPORT_TYPE(type) A macro that pre or appends PNG_IMPEXP to + * 'type', compiler specific. + * + * PNG_DLL_EXPORT Set to the magic to use during a libpng build to + * make a symbol exported from the DLL. Not used in the + * public header files; see pngpriv.h for how it is used + * in the libpng build. + * + * PNG_DLL_IMPORT Set to the magic to force the libpng symbols to come + * from a DLL - used to define PNG_IMPEXP when + * PNG_USE_DLL is set. + */ + +/* System specific discovery. + * ========================== + * This code is used at build time to find PNG_IMPEXP, the API settings + * and PNG_EXPORT_TYPE(), it may also set a macro to indicate the DLL + * import processing is possible. On Windows systems it also sets + * compiler-specific macros to the values required to change the calling + * conventions of the various functions. + */ +#if defined(_WIN32) || defined(__WIN32__) || defined(__NT__) || \ + defined(__CYGWIN__) + /* Windows system (DOS doesn't support DLLs). Includes builds under Cygwin or + * MinGW on any architecture currently supported by Windows. Also includes + * Watcom builds but these need special treatment because they are not + * compatible with GCC or Visual C because of different calling conventions. + */ +# if PNG_API_RULE == 2 + /* If this line results in an error, either because __watcall is not + * understood or because of a redefine just below you cannot use *this* + * build of the library with the compiler you are using. *This* build was + * build using Watcom and applications must also be built using Watcom! + */ +# define PNGCAPI __watcall +# endif + +# if defined(__GNUC__) || (defined(_MSC_VER) && (_MSC_VER >= 800)) +# define PNGCAPI __cdecl +# if PNG_API_RULE == 1 + /* If this line results in an error __stdcall is not understood and + * PNG_API_RULE should not have been set to '1'. + */ +# define PNGAPI __stdcall +# endif +# else + /* An older compiler, or one not detected (erroneously) above, + * if necessary override on the command line to get the correct + * variants for the compiler. + */ +# ifndef PNGCAPI +# define PNGCAPI _cdecl +# endif +# if PNG_API_RULE == 1 && !defined(PNGAPI) +# define PNGAPI _stdcall +# endif +# endif /* compiler/api */ + + /* NOTE: PNGCBAPI always defaults to PNGCAPI. */ + +# if defined(PNGAPI) && !defined(PNG_USER_PRIVATEBUILD) +# error "PNG_USER_PRIVATEBUILD must be defined if PNGAPI is changed" +# endif + +# if (defined(_MSC_VER) && _MSC_VER < 800) ||\ + (defined(__BORLANDC__) && __BORLANDC__ < 0x500) + /* older Borland and MSC + * compilers used '__export' and required this to be after + * the type. + */ +# ifndef PNG_EXPORT_TYPE +# define PNG_EXPORT_TYPE(type) type PNG_IMPEXP +# endif +# define PNG_DLL_EXPORT __export +# else /* newer compiler */ +# define PNG_DLL_EXPORT __declspec(dllexport) +# ifndef PNG_DLL_IMPORT +# define PNG_DLL_IMPORT __declspec(dllimport) +# endif +# endif /* compiler */ + +#else /* !Windows */ +# if (defined(__IBMC__) || defined(__IBMCPP__)) && defined(__OS2__) +# define PNGAPI _System +# else /* !Windows/x86 && !OS/2 */ + /* Use the defaults, or define PNG*API on the command line (but + * this will have to be done for every compile!) + */ +# endif /* other system, !OS/2 */ +#endif /* !Windows/x86 */ + +/* Now do all the defaulting . */ +#ifndef PNGCAPI +# define PNGCAPI +#endif +#ifndef PNGCBAPI +# define PNGCBAPI PNGCAPI +#endif +#ifndef PNGAPI +# define PNGAPI PNGCAPI +#endif + +/* PNG_IMPEXP may be set on the compilation system command line or (if not set) + * then in an internal header file when building the library, otherwise (when + * using the library) it is set here. + */ +#ifndef PNG_IMPEXP +# if defined(PNG_USE_DLL) && defined(PNG_DLL_IMPORT) + /* This forces use of a DLL, disallowing static linking */ +# define PNG_IMPEXP PNG_DLL_IMPORT +# endif + +# ifndef PNG_IMPEXP +# define PNG_IMPEXP +# endif +#endif + +/* In 1.5.2 the definition of PNG_FUNCTION has been changed to always treat + * 'attributes' as a storage class - the attributes go at the start of the + * function definition, and attributes are always appended regardless of the + * compiler. This considerably simplifies these macros but may cause problems + * if any compilers both need function attributes and fail to handle them as + * a storage class (this is unlikely.) + */ +#ifndef PNG_FUNCTION +# define PNG_FUNCTION(type, name, args, attributes) attributes type name args +#endif + +#ifndef PNG_EXPORT_TYPE +# define PNG_EXPORT_TYPE(type) PNG_IMPEXP type +#endif + + /* The ordinal value is only relevant when preprocessing png.h for symbol + * table entries, so we discard it here. See the .dfn files in the + * scripts directory. + */ + +#ifndef PNG_EXPORTA +# define PNG_EXPORTA(ordinal, type, name, args, attributes) \ + PNG_FUNCTION(PNG_EXPORT_TYPE(type), (PNGAPI name), args, \ + PNG_LINKAGE_API attributes) +#endif + +/* ANSI-C (C90) does not permit a macro to be invoked with an empty argument, + * so make something non-empty to satisfy the requirement: + */ +#define PNG_EMPTY /*empty list*/ + +#define PNG_EXPORT(ordinal, type, name, args) \ + PNG_EXPORTA(ordinal, type, name, args, PNG_EMPTY) + +/* Use PNG_REMOVED to comment out a removed interface. */ +#ifndef PNG_REMOVED +# define PNG_REMOVED(ordinal, type, name, args, attributes) +#endif + +#ifndef PNG_CALLBACK +# define PNG_CALLBACK(type, name, args) type (PNGCBAPI name) args +#endif + +/* Support for compiler specific function attributes. These are used + * so that where compiler support is available incorrect use of API + * functions in png.h will generate compiler warnings. + * + * Added at libpng-1.2.41. + */ + +#ifndef PNG_NO_PEDANTIC_WARNINGS +# ifndef PNG_PEDANTIC_WARNINGS_SUPPORTED +# define PNG_PEDANTIC_WARNINGS_SUPPORTED +# endif +#endif + +#ifdef PNG_PEDANTIC_WARNINGS_SUPPORTED + /* Support for compiler specific function attributes. These are used + * so that where compiler support is available, incorrect use of API + * functions in png.h will generate compiler warnings. Added at libpng + * version 1.2.41. Disabling these removes the warnings but may also produce + * less efficient code. + */ +# if defined(__clang__) && defined(__has_attribute) + /* Clang defines both __clang__ and __GNUC__. Check __clang__ first. */ +# if !defined(PNG_USE_RESULT) && __has_attribute(__warn_unused_result__) +# define PNG_USE_RESULT __attribute__((__warn_unused_result__)) +# endif +# if !defined(PNG_NORETURN) && __has_attribute(__noreturn__) +# define PNG_NORETURN __attribute__((__noreturn__)) +# endif +# if !defined(PNG_ALLOCATED) && __has_attribute(__malloc__) +# define PNG_ALLOCATED __attribute__((__malloc__)) +# endif +# if !defined(PNG_DEPRECATED) && __has_attribute(__deprecated__) +# define PNG_DEPRECATED __attribute__((__deprecated__)) +# endif +# if !defined(PNG_PRIVATE) +# ifdef __has_extension +# if __has_extension(attribute_unavailable_with_message) +# define PNG_PRIVATE __attribute__((__unavailable__(\ + "This function is not exported by libpng."))) +# endif +# endif +# endif +# ifndef PNG_RESTRICT +# define PNG_RESTRICT __restrict +# endif + +# elif defined(__GNUC__) +# ifndef PNG_USE_RESULT +# define PNG_USE_RESULT __attribute__((__warn_unused_result__)) +# endif +# ifndef PNG_NORETURN +# define PNG_NORETURN __attribute__((__noreturn__)) +# endif +# if __GNUC__ >= 3 +# ifndef PNG_ALLOCATED +# define PNG_ALLOCATED __attribute__((__malloc__)) +# endif +# ifndef PNG_DEPRECATED +# define PNG_DEPRECATED __attribute__((__deprecated__)) +# endif +# ifndef PNG_PRIVATE +# if 0 /* Doesn't work so we use deprecated instead*/ +# define PNG_PRIVATE \ + __attribute__((warning("This function is not exported by libpng."))) +# else +# define PNG_PRIVATE \ + __attribute__((__deprecated__)) +# endif +# endif +# if ((__GNUC__ > 3) || !defined(__GNUC_MINOR__) || (__GNUC_MINOR__ >= 1)) +# ifndef PNG_RESTRICT +# define PNG_RESTRICT __restrict +# endif +# endif /* __GNUC__.__GNUC_MINOR__ > 3.0 */ +# endif /* __GNUC__ >= 3 */ + +# elif defined(_MSC_VER) && (_MSC_VER >= 1300) +# ifndef PNG_USE_RESULT +# define PNG_USE_RESULT /* not supported */ +# endif +# ifndef PNG_NORETURN +# define PNG_NORETURN __declspec(noreturn) +# endif +# ifndef PNG_ALLOCATED +# if (_MSC_VER >= 1400) +# define PNG_ALLOCATED __declspec(restrict) +# endif +# endif +# ifndef PNG_DEPRECATED +# define PNG_DEPRECATED __declspec(deprecated) +# endif +# ifndef PNG_PRIVATE +# define PNG_PRIVATE __declspec(deprecated) +# endif +# ifndef PNG_RESTRICT +# if (_MSC_VER >= 1400) +# define PNG_RESTRICT __restrict +# endif +# endif + +# elif defined(__WATCOMC__) +# ifndef PNG_RESTRICT +# define PNG_RESTRICT __restrict +# endif +# endif +#endif /* PNG_PEDANTIC_WARNINGS */ + +#ifndef PNG_DEPRECATED +# define PNG_DEPRECATED /* Use of this function is deprecated */ +#endif +#ifndef PNG_USE_RESULT +# define PNG_USE_RESULT /* The result of this function must be checked */ +#endif +#ifndef PNG_NORETURN +# define PNG_NORETURN /* This function does not return */ +#endif +#ifndef PNG_ALLOCATED +# define PNG_ALLOCATED /* The result of the function is new memory */ +#endif +#ifndef PNG_PRIVATE +# define PNG_PRIVATE /* This is a private libpng function */ +#endif +#ifndef PNG_RESTRICT +# define PNG_RESTRICT /* The C99 "restrict" feature */ +#endif + +#ifndef PNG_FP_EXPORT /* A floating point API. */ +# ifdef PNG_FLOATING_POINT_SUPPORTED +# define PNG_FP_EXPORT(ordinal, type, name, args)\ + PNG_EXPORT(ordinal, type, name, args); +# else /* No floating point APIs */ +# define PNG_FP_EXPORT(ordinal, type, name, args) +# endif +#endif +#ifndef PNG_FIXED_EXPORT /* A fixed point API. */ +# ifdef PNG_FIXED_POINT_SUPPORTED +# define PNG_FIXED_EXPORT(ordinal, type, name, args)\ + PNG_EXPORT(ordinal, type, name, args); +# else /* No fixed point APIs */ +# define PNG_FIXED_EXPORT(ordinal, type, name, args) +# endif +#endif + +#ifndef PNG_BUILDING_SYMBOL_TABLE +/* Some typedefs to get us started. These should be safe on most of the common + * platforms. + * + * png_uint_32 and png_int_32 may, currently, be larger than required to hold a + * 32-bit value however this is not normally advisable. + * + * png_uint_16 and png_int_16 should always be two bytes in size - this is + * verified at library build time. + * + * png_byte must always be one byte in size. + * + * The checks below use constants from limits.h, as defined by the ISOC90 + * standard. + */ +#if CHAR_BIT == 8 && UCHAR_MAX == 255 + typedef unsigned char png_byte; +#else +# error "libpng requires 8-bit bytes" +#endif + +#if INT_MIN == -32768 && INT_MAX == 32767 + typedef int png_int_16; +#elif SHRT_MIN == -32768 && SHRT_MAX == 32767 + typedef short png_int_16; +#else +# error "libpng requires a signed 16-bit type" +#endif + +#if UINT_MAX == 65535 + typedef unsigned int png_uint_16; +#elif USHRT_MAX == 65535 + typedef unsigned short png_uint_16; +#else +# error "libpng requires an unsigned 16-bit type" +#endif + +#if INT_MIN < -2147483646 && INT_MAX > 2147483646 + typedef int png_int_32; +#elif LONG_MIN < -2147483646 && LONG_MAX > 2147483646 + typedef long int png_int_32; +#else +# error "libpng requires a signed 32-bit (or more) type" +#endif + +#if UINT_MAX > 4294967294U + typedef unsigned int png_uint_32; +#elif ULONG_MAX > 4294967294U + typedef unsigned long int png_uint_32; +#else +# error "libpng requires an unsigned 32-bit (or more) type" +#endif + +/* Prior to 1.6.0, it was possible to disable the use of size_t and ptrdiff_t. + * From 1.6.0 onwards, an ISO C90 compiler, as well as a standard-compliant + * behavior of sizeof and ptrdiff_t are required. + * The legacy typedefs are provided here for backwards compatibility. + */ +typedef size_t png_size_t; +typedef ptrdiff_t png_ptrdiff_t; + +/* libpng needs to know the maximum value of 'size_t' and this controls the + * definition of png_alloc_size_t, below. This maximum value of size_t limits + * but does not control the maximum allocations the library makes - there is + * direct application control of this through png_set_user_limits(). + */ +#ifndef PNG_SMALL_SIZE_T + /* Compiler specific tests for systems where size_t is known to be less than + * 32 bits (some of these systems may no longer work because of the lack of + * 'far' support; see above.) + */ +# if (defined(__TURBOC__) && !defined(__FLAT__)) ||\ + (defined(_MSC_VER) && defined(MAXSEG_64K)) +# define PNG_SMALL_SIZE_T +# endif +#endif + +/* png_alloc_size_t is guaranteed to be no smaller than size_t, and no smaller + * than png_uint_32. Casts from size_t or png_uint_32 to png_alloc_size_t are + * not necessary; in fact, it is recommended not to use them at all, so that + * the compiler can complain when something turns out to be problematic. + * + * Casts in the other direction (from png_alloc_size_t to size_t or + * png_uint_32) should be explicitly applied; however, we do not expect to + * encounter practical situations that require such conversions. + * + * PNG_SMALL_SIZE_T must be defined if the maximum value of size_t is less than + * 4294967295 - i.e. less than the maximum value of png_uint_32. + */ +#ifdef PNG_SMALL_SIZE_T + typedef png_uint_32 png_alloc_size_t; +#else + typedef size_t png_alloc_size_t; +#endif + +/* Prior to 1.6.0 libpng offered limited support for Microsoft C compiler + * implementations of Intel CPU specific support of user-mode segmented address + * spaces, where 16-bit pointers address more than 65536 bytes of memory using + * separate 'segment' registers. The implementation requires two different + * types of pointer (only one of which includes the segment value.) + * + * If required this support is available in version 1.2 of libpng and may be + * available in versions through 1.5, although the correctness of the code has + * not been verified recently. + */ + +/* Typedef for floating-point numbers that are converted to fixed-point with a + * multiple of 100,000, e.g., gamma + */ +typedef png_int_32 png_fixed_point; + +/* Add typedefs for pointers */ +typedef void * png_voidp; +typedef const void * png_const_voidp; +typedef png_byte * png_bytep; +typedef const png_byte * png_const_bytep; +typedef png_uint_32 * png_uint_32p; +typedef const png_uint_32 * png_const_uint_32p; +typedef png_int_32 * png_int_32p; +typedef const png_int_32 * png_const_int_32p; +typedef png_uint_16 * png_uint_16p; +typedef const png_uint_16 * png_const_uint_16p; +typedef png_int_16 * png_int_16p; +typedef const png_int_16 * png_const_int_16p; +typedef char * png_charp; +typedef const char * png_const_charp; +typedef png_fixed_point * png_fixed_point_p; +typedef const png_fixed_point * png_const_fixed_point_p; +typedef size_t * png_size_tp; +typedef const size_t * png_const_size_tp; + +#ifdef PNG_STDIO_SUPPORTED +typedef FILE * png_FILE_p; +#endif + +#ifdef PNG_FLOATING_POINT_SUPPORTED +typedef double * png_doublep; +typedef const double * png_const_doublep; +#endif + +/* Pointers to pointers; i.e. arrays */ +typedef png_byte * * png_bytepp; +typedef png_uint_32 * * png_uint_32pp; +typedef png_int_32 * * png_int_32pp; +typedef png_uint_16 * * png_uint_16pp; +typedef png_int_16 * * png_int_16pp; +typedef const char * * png_const_charpp; +typedef char * * png_charpp; +typedef png_fixed_point * * png_fixed_point_pp; +#ifdef PNG_FLOATING_POINT_SUPPORTED +typedef double * * png_doublepp; +#endif + +/* Pointers to pointers to pointers; i.e., pointer to array */ +typedef char * * * png_charppp; + +#endif /* PNG_BUILDING_SYMBOL_TABLE */ + +#endif /* PNGCONF_H */ diff --git a/dependencies/linux64/include/libpng16/pnglibconf.h b/dependencies/linux64/include/libpng16/pnglibconf.h new file mode 100644 index 0000000..17245b4 --- /dev/null +++ b/dependencies/linux64/include/libpng16/pnglibconf.h @@ -0,0 +1,233 @@ +/* pnglibconf.h - library build configuration */ + +/* libpng version 1.6.47 */ + +/* Copyright (c) 2018-2025 Cosmin Truta */ +/* Copyright (c) 1998-2002,2004,2006-2018 Glenn Randers-Pehrson */ + +/* This code is released under the libpng license. */ +/* For conditions of distribution and use, see the disclaimer */ +/* and license in png.h */ + +/* pnglibconf.h */ +/* Machine generated file: DO NOT EDIT */ +/* Derived from: scripts/pnglibconf.dfa */ +#ifndef PNGLCONF_H +#define PNGLCONF_H +/* options */ +#define PNG_16BIT_SUPPORTED +#define PNG_ALIGNED_MEMORY_SUPPORTED +/*#undef PNG_ARM_NEON_API_SUPPORTED*/ +/*#undef PNG_ARM_NEON_CHECK_SUPPORTED*/ +#define PNG_BENIGN_ERRORS_SUPPORTED +#define PNG_BENIGN_READ_ERRORS_SUPPORTED +/*#undef PNG_BENIGN_WRITE_ERRORS_SUPPORTED*/ +#define PNG_BUILD_GRAYSCALE_PALETTE_SUPPORTED +#define PNG_CHECK_FOR_INVALID_INDEX_SUPPORTED +#define PNG_COLORSPACE_SUPPORTED +#define PNG_CONSOLE_IO_SUPPORTED +#define PNG_CONVERT_tIME_SUPPORTED +/*#undef PNG_DISABLE_ADLER32_CHECK_SUPPORTED*/ +#define PNG_EASY_ACCESS_SUPPORTED +/*#undef PNG_ERROR_NUMBERS_SUPPORTED*/ +#define PNG_ERROR_TEXT_SUPPORTED +#define PNG_FIXED_POINT_SUPPORTED +#define PNG_FLOATING_ARITHMETIC_SUPPORTED +#define PNG_FLOATING_POINT_SUPPORTED +#define PNG_FORMAT_AFIRST_SUPPORTED +#define PNG_FORMAT_BGR_SUPPORTED +#define PNG_GAMMA_SUPPORTED +#define PNG_GET_PALETTE_MAX_SUPPORTED +#define PNG_HANDLE_AS_UNKNOWN_SUPPORTED +#define PNG_INCH_CONVERSIONS_SUPPORTED +#define PNG_INFO_IMAGE_SUPPORTED +#define PNG_IO_STATE_SUPPORTED +/*#undef PNG_MIPS_MMI_API_SUPPORTED*/ +/*#undef PNG_MIPS_MMI_CHECK_SUPPORTED*/ +/*#undef PNG_MIPS_MSA_API_SUPPORTED*/ +/*#undef PNG_MIPS_MSA_CHECK_SUPPORTED*/ +#define PNG_MNG_FEATURES_SUPPORTED +#define PNG_POINTER_INDEXING_SUPPORTED +/*#undef PNG_POWERPC_VSX_API_SUPPORTED*/ +/*#undef PNG_POWERPC_VSX_CHECK_SUPPORTED*/ +#define PNG_PROGRESSIVE_READ_SUPPORTED +#define PNG_READ_16BIT_SUPPORTED +#define PNG_READ_ALPHA_MODE_SUPPORTED +#define PNG_READ_ANCILLARY_CHUNKS_SUPPORTED +#define PNG_READ_BACKGROUND_SUPPORTED +#define PNG_READ_BGR_SUPPORTED +#define PNG_READ_CHECK_FOR_INVALID_INDEX_SUPPORTED +#define PNG_READ_COMPOSITE_NODIV_SUPPORTED +#define PNG_READ_COMPRESSED_TEXT_SUPPORTED +#define PNG_READ_EXPAND_16_SUPPORTED +#define PNG_READ_EXPAND_SUPPORTED +#define PNG_READ_FILLER_SUPPORTED +#define PNG_READ_GAMMA_SUPPORTED +#define PNG_READ_GET_PALETTE_MAX_SUPPORTED +#define PNG_READ_GRAY_TO_RGB_SUPPORTED +#define PNG_READ_INTERLACING_SUPPORTED +#define PNG_READ_INT_FUNCTIONS_SUPPORTED +#define PNG_READ_INVERT_ALPHA_SUPPORTED +#define PNG_READ_INVERT_SUPPORTED +#define PNG_READ_OPT_PLTE_SUPPORTED +#define PNG_READ_PACKSWAP_SUPPORTED +#define PNG_READ_PACK_SUPPORTED +#define PNG_READ_QUANTIZE_SUPPORTED +#define PNG_READ_RGB_TO_GRAY_SUPPORTED +#define PNG_READ_SCALE_16_TO_8_SUPPORTED +#define PNG_READ_SHIFT_SUPPORTED +#define PNG_READ_STRIP_16_TO_8_SUPPORTED +#define PNG_READ_STRIP_ALPHA_SUPPORTED +#define PNG_READ_SUPPORTED +#define PNG_READ_SWAP_ALPHA_SUPPORTED +#define PNG_READ_SWAP_SUPPORTED +#define PNG_READ_TEXT_SUPPORTED +#define PNG_READ_TRANSFORMS_SUPPORTED +#define PNG_READ_UNKNOWN_CHUNKS_SUPPORTED +#define PNG_READ_USER_CHUNKS_SUPPORTED +#define PNG_READ_USER_TRANSFORM_SUPPORTED +#define PNG_READ_bKGD_SUPPORTED +#define PNG_READ_cHRM_SUPPORTED +#define PNG_READ_cICP_SUPPORTED +#define PNG_READ_cLLI_SUPPORTED +#define PNG_READ_eXIf_SUPPORTED +#define PNG_READ_gAMA_SUPPORTED +#define PNG_READ_hIST_SUPPORTED +#define PNG_READ_iCCP_SUPPORTED +#define PNG_READ_iTXt_SUPPORTED +#define PNG_READ_mDCV_SUPPORTED +#define PNG_READ_oFFs_SUPPORTED +#define PNG_READ_pCAL_SUPPORTED +#define PNG_READ_pHYs_SUPPORTED +#define PNG_READ_sBIT_SUPPORTED +#define PNG_READ_sCAL_SUPPORTED +#define PNG_READ_sPLT_SUPPORTED +#define PNG_READ_sRGB_SUPPORTED +#define PNG_READ_tEXt_SUPPORTED +#define PNG_READ_tIME_SUPPORTED +#define PNG_READ_tRNS_SUPPORTED +#define PNG_READ_zTXt_SUPPORTED +#define PNG_SAVE_INT_32_SUPPORTED +#define PNG_SAVE_UNKNOWN_CHUNKS_SUPPORTED +#define PNG_SEQUENTIAL_READ_SUPPORTED +#define PNG_SETJMP_SUPPORTED +#define PNG_SET_OPTION_SUPPORTED +#define PNG_SET_UNKNOWN_CHUNKS_SUPPORTED +#define PNG_SET_USER_LIMITS_SUPPORTED +#define PNG_SIMPLIFIED_READ_AFIRST_SUPPORTED +#define PNG_SIMPLIFIED_READ_BGR_SUPPORTED +#define PNG_SIMPLIFIED_READ_SUPPORTED +#define PNG_SIMPLIFIED_WRITE_AFIRST_SUPPORTED +#define PNG_SIMPLIFIED_WRITE_BGR_SUPPORTED +#define PNG_SIMPLIFIED_WRITE_STDIO_SUPPORTED +#define PNG_SIMPLIFIED_WRITE_SUPPORTED +#define PNG_STDIO_SUPPORTED +#define PNG_STORE_UNKNOWN_CHUNKS_SUPPORTED +#define PNG_TEXT_SUPPORTED +#define PNG_TIME_RFC1123_SUPPORTED +#define PNG_UNKNOWN_CHUNKS_SUPPORTED +#define PNG_USER_CHUNKS_SUPPORTED +#define PNG_USER_LIMITS_SUPPORTED +#define PNG_USER_MEM_SUPPORTED +#define PNG_USER_TRANSFORM_INFO_SUPPORTED +#define PNG_USER_TRANSFORM_PTR_SUPPORTED +#define PNG_WARNINGS_SUPPORTED +#define PNG_WRITE_16BIT_SUPPORTED +#define PNG_WRITE_ANCILLARY_CHUNKS_SUPPORTED +#define PNG_WRITE_BGR_SUPPORTED +#define PNG_WRITE_CHECK_FOR_INVALID_INDEX_SUPPORTED +#define PNG_WRITE_COMPRESSED_TEXT_SUPPORTED +#define PNG_WRITE_CUSTOMIZE_COMPRESSION_SUPPORTED +#define PNG_WRITE_CUSTOMIZE_ZTXT_COMPRESSION_SUPPORTED +#define PNG_WRITE_FILLER_SUPPORTED +#define PNG_WRITE_FILTER_SUPPORTED +#define PNG_WRITE_FLUSH_SUPPORTED +#define PNG_WRITE_GET_PALETTE_MAX_SUPPORTED +#define PNG_WRITE_INTERLACING_SUPPORTED +#define PNG_WRITE_INT_FUNCTIONS_SUPPORTED +#define PNG_WRITE_INVERT_ALPHA_SUPPORTED +#define PNG_WRITE_INVERT_SUPPORTED +#define PNG_WRITE_OPTIMIZE_CMF_SUPPORTED +#define PNG_WRITE_PACKSWAP_SUPPORTED +#define PNG_WRITE_PACK_SUPPORTED +#define PNG_WRITE_SHIFT_SUPPORTED +#define PNG_WRITE_SUPPORTED +#define PNG_WRITE_SWAP_ALPHA_SUPPORTED +#define PNG_WRITE_SWAP_SUPPORTED +#define PNG_WRITE_TEXT_SUPPORTED +#define PNG_WRITE_TRANSFORMS_SUPPORTED +#define PNG_WRITE_UNKNOWN_CHUNKS_SUPPORTED +#define PNG_WRITE_USER_TRANSFORM_SUPPORTED +#define PNG_WRITE_WEIGHTED_FILTER_SUPPORTED +#define PNG_WRITE_bKGD_SUPPORTED +#define PNG_WRITE_cHRM_SUPPORTED +#define PNG_WRITE_cICP_SUPPORTED +#define PNG_WRITE_cLLI_SUPPORTED +#define PNG_WRITE_eXIf_SUPPORTED +#define PNG_WRITE_gAMA_SUPPORTED +#define PNG_WRITE_hIST_SUPPORTED +#define PNG_WRITE_iCCP_SUPPORTED +#define PNG_WRITE_iTXt_SUPPORTED +#define PNG_WRITE_mDCV_SUPPORTED +#define PNG_WRITE_oFFs_SUPPORTED +#define PNG_WRITE_pCAL_SUPPORTED +#define PNG_WRITE_pHYs_SUPPORTED +#define PNG_WRITE_sBIT_SUPPORTED +#define PNG_WRITE_sCAL_SUPPORTED +#define PNG_WRITE_sPLT_SUPPORTED +#define PNG_WRITE_sRGB_SUPPORTED +#define PNG_WRITE_tEXt_SUPPORTED +#define PNG_WRITE_tIME_SUPPORTED +#define PNG_WRITE_tRNS_SUPPORTED +#define PNG_WRITE_zTXt_SUPPORTED +#define PNG_bKGD_SUPPORTED +#define PNG_cHRM_SUPPORTED +#define PNG_cICP_SUPPORTED +#define PNG_cLLI_SUPPORTED +#define PNG_eXIf_SUPPORTED +#define PNG_gAMA_SUPPORTED +#define PNG_hIST_SUPPORTED +#define PNG_iCCP_SUPPORTED +#define PNG_iTXt_SUPPORTED +#define PNG_mDCV_SUPPORTED +#define PNG_oFFs_SUPPORTED +#define PNG_pCAL_SUPPORTED +#define PNG_pHYs_SUPPORTED +#define PNG_sBIT_SUPPORTED +#define PNG_sCAL_SUPPORTED +#define PNG_sPLT_SUPPORTED +#define PNG_sRGB_SUPPORTED +#define PNG_tEXt_SUPPORTED +#define PNG_tIME_SUPPORTED +#define PNG_tRNS_SUPPORTED +#define PNG_zTXt_SUPPORTED +/* end of options */ +/* settings */ +#define PNG_API_RULE 0 +#define PNG_DEFAULT_READ_MACROS 1 +#define PNG_GAMMA_THRESHOLD_FIXED 5000 +#define PNG_IDAT_READ_SIZE PNG_ZBUF_SIZE +#define PNG_INFLATE_BUF_SIZE 1024 +#define PNG_LINKAGE_API extern +#define PNG_LINKAGE_CALLBACK extern +#define PNG_LINKAGE_DATA extern +#define PNG_LINKAGE_FUNCTION extern +#define PNG_MAX_GAMMA_8 11 +#define PNG_QUANTIZE_BLUE_BITS 5 +#define PNG_QUANTIZE_GREEN_BITS 5 +#define PNG_QUANTIZE_RED_BITS 5 +#define PNG_TEXT_Z_DEFAULT_COMPRESSION (-1) +#define PNG_TEXT_Z_DEFAULT_STRATEGY 0 +#define PNG_USER_CHUNK_CACHE_MAX 1000 +#define PNG_USER_CHUNK_MALLOC_MAX 8000000 +#define PNG_USER_HEIGHT_MAX 1000000 +#define PNG_USER_WIDTH_MAX 1000000 +#define PNG_ZBUF_SIZE 8192 +#define PNG_ZLIB_VERNUM 0x1310 +#define PNG_Z_DEFAULT_COMPRESSION (-1) +#define PNG_Z_DEFAULT_NOFILTER_STRATEGY 0 +#define PNG_Z_DEFAULT_STRATEGY 1 +#define PNG_sCAL_PRECISION 5 +#define PNG_sRGB_PROFILE_CHECKS 2 +/* end of settings */ +#endif /* PNGLCONF_H */ diff --git a/dependencies/linux64/include/png.h b/dependencies/linux64/include/png.h new file mode 100644 index 0000000..9b069e4 --- /dev/null +++ b/dependencies/linux64/include/png.h @@ -0,0 +1,3358 @@ +/* png.h - header file for PNG reference library + * + * libpng version 1.6.47 + * + * Copyright (c) 2018-2025 Cosmin Truta + * Copyright (c) 1998-2002,2004,2006-2018 Glenn Randers-Pehrson + * Copyright (c) 1996-1997 Andreas Dilger + * Copyright (c) 1995-1996 Guy Eric Schalnat, Group 42, Inc. + * + * This code is released under the libpng license. (See LICENSE, below.) + * + * Authors and maintainers: + * libpng versions 0.71, May 1995, through 0.88, January 1996: Guy Schalnat + * libpng versions 0.89, June 1996, through 0.96, May 1997: Andreas Dilger + * libpng versions 0.97, January 1998, through 1.6.35, July 2018: + * Glenn Randers-Pehrson + * libpng versions 1.6.36, December 2018, through 1.6.47, February 2025: + * Cosmin Truta + * See also "Contributing Authors", below. + */ + +/* + * COPYRIGHT NOTICE, DISCLAIMER, and LICENSE + * ========================================= + * + * PNG Reference Library License version 2 + * --------------------------------------- + * + * * Copyright (c) 1995-2025 The PNG Reference Library Authors. + * * Copyright (c) 2018-2025 Cosmin Truta. + * * Copyright (c) 2000-2002, 2004, 2006-2018 Glenn Randers-Pehrson. + * * Copyright (c) 1996-1997 Andreas Dilger. + * * Copyright (c) 1995-1996 Guy Eric Schalnat, Group 42, Inc. + * + * The software is supplied "as is", without warranty of any kind, + * express or implied, including, without limitation, the warranties + * of merchantability, fitness for a particular purpose, title, and + * non-infringement. In no event shall the Copyright owners, or + * anyone distributing the software, be liable for any damages or + * other liability, whether in contract, tort or otherwise, arising + * from, out of, or in connection with the software, or the use or + * other dealings in the software, even if advised of the possibility + * of such damage. + * + * Permission is hereby granted to use, copy, modify, and distribute + * this software, or portions hereof, for any purpose, without fee, + * subject to the following restrictions: + * + * 1. The origin of this software must not be misrepresented; you + * must not claim that you wrote the original software. If you + * use this software in a product, an acknowledgment in the product + * documentation would be appreciated, but is not required. + * + * 2. Altered source versions must be plainly marked as such, and must + * not be misrepresented as being the original software. + * + * 3. This Copyright notice may not be removed or altered from any + * source or altered source distribution. + * + * + * PNG Reference Library License version 1 (for libpng 0.5 through 1.6.35) + * ----------------------------------------------------------------------- + * + * libpng versions 1.0.7, July 1, 2000, through 1.6.35, July 15, 2018 are + * Copyright (c) 2000-2002, 2004, 2006-2018 Glenn Randers-Pehrson, are + * derived from libpng-1.0.6, and are distributed according to the same + * disclaimer and license as libpng-1.0.6 with the following individuals + * added to the list of Contributing Authors: + * + * Simon-Pierre Cadieux + * Eric S. Raymond + * Mans Rullgard + * Cosmin Truta + * Gilles Vollant + * James Yu + * Mandar Sahastrabuddhe + * Google Inc. + * Vadim Barkov + * + * and with the following additions to the disclaimer: + * + * There is no warranty against interference with your enjoyment of + * the library or against infringement. There is no warranty that our + * efforts or the library will fulfill any of your particular purposes + * or needs. This library is provided with all faults, and the entire + * risk of satisfactory quality, performance, accuracy, and effort is + * with the user. + * + * Some files in the "contrib" directory and some configure-generated + * files that are distributed with libpng have other copyright owners, and + * are released under other open source licenses. + * + * libpng versions 0.97, January 1998, through 1.0.6, March 20, 2000, are + * Copyright (c) 1998-2000 Glenn Randers-Pehrson, are derived from + * libpng-0.96, and are distributed according to the same disclaimer and + * license as libpng-0.96, with the following individuals added to the + * list of Contributing Authors: + * + * Tom Lane + * Glenn Randers-Pehrson + * Willem van Schaik + * + * libpng versions 0.89, June 1996, through 0.96, May 1997, are + * Copyright (c) 1996-1997 Andreas Dilger, are derived from libpng-0.88, + * and are distributed according to the same disclaimer and license as + * libpng-0.88, with the following individuals added to the list of + * Contributing Authors: + * + * John Bowler + * Kevin Bracey + * Sam Bushell + * Magnus Holmgren + * Greg Roelofs + * Tom Tanner + * + * Some files in the "scripts" directory have other copyright owners, + * but are released under this license. + * + * libpng versions 0.5, May 1995, through 0.88, January 1996, are + * Copyright (c) 1995-1996 Guy Eric Schalnat, Group 42, Inc. + * + * For the purposes of this copyright and license, "Contributing Authors" + * is defined as the following set of individuals: + * + * Andreas Dilger + * Dave Martindale + * Guy Eric Schalnat + * Paul Schmidt + * Tim Wegner + * + * The PNG Reference Library is supplied "AS IS". The Contributing + * Authors and Group 42, Inc. disclaim all warranties, expressed or + * implied, including, without limitation, the warranties of + * merchantability and of fitness for any purpose. The Contributing + * Authors and Group 42, Inc. assume no liability for direct, indirect, + * incidental, special, exemplary, or consequential damages, which may + * result from the use of the PNG Reference Library, even if advised of + * the possibility of such damage. + * + * Permission is hereby granted to use, copy, modify, and distribute this + * source code, or portions hereof, for any purpose, without fee, subject + * to the following restrictions: + * + * 1. The origin of this source code must not be misrepresented. + * + * 2. Altered versions must be plainly marked as such and must not + * be misrepresented as being the original source. + * + * 3. This Copyright notice may not be removed or altered from any + * source or altered source distribution. + * + * The Contributing Authors and Group 42, Inc. specifically permit, + * without fee, and encourage the use of this source code as a component + * to supporting the PNG file format in commercial products. If you use + * this source code in a product, acknowledgment is not required but would + * be appreciated. + * + * END OF COPYRIGHT NOTICE, DISCLAIMER, and LICENSE. + * + * TRADEMARK + * ========= + * + * The name "libpng" has not been registered by the Copyright owners + * as a trademark in any jurisdiction. However, because libpng has + * been distributed and maintained world-wide, continually since 1995, + * the Copyright owners claim "common-law trademark protection" in any + * jurisdiction where common-law trademark is recognized. + */ + +/* + * A "png_get_copyright" function is available, for convenient use in "about" + * boxes and the like: + * + * printf("%s", png_get_copyright(NULL)); + * + * Also, the PNG logo (in PNG format, of course) is supplied in the + * files "pngbar.png" and "pngbar.jpg (88x31) and "pngnow.png" (98x31). + */ + +/* + * The contributing authors would like to thank all those who helped + * with testing, bug fixes, and patience. This wouldn't have been + * possible without all of you. + * + * Thanks to Frank J. T. Wojcik for helping with the documentation. + */ + +/* Note about libpng version numbers: + * + * Due to various miscommunications, unforeseen code incompatibilities + * and occasional factors outside the authors' control, version numbering + * on the library has not always been consistent and straightforward. + * The following table summarizes matters since version 0.89c, which was + * the first widely used release: + * + * source png.h png.h shared-lib + * version string int version + * ------- ------ ----- ---------- + * 0.89c "1.0 beta 3" 0.89 89 1.0.89 + * 0.90 "1.0 beta 4" 0.90 90 0.90 [should have been 2.0.90] + * 0.95 "1.0 beta 5" 0.95 95 0.95 [should have been 2.0.95] + * 0.96 "1.0 beta 6" 0.96 96 0.96 [should have been 2.0.96] + * 0.97b "1.00.97 beta 7" 1.00.97 97 1.0.1 [should have been 2.0.97] + * 0.97c 0.97 97 2.0.97 + * 0.98 0.98 98 2.0.98 + * 0.99 0.99 98 2.0.99 + * 0.99a-m 0.99 99 2.0.99 + * 1.00 1.00 100 2.1.0 [100 should be 10000] + * 1.0.0 (from here on, the 100 2.1.0 [100 should be 10000] + * 1.0.1 png.h string is 10001 2.1.0 + * 1.0.1a-e identical to the 10002 from here on, the shared library + * 1.0.2 source version) 10002 is 2.V where V is the source code + * 1.0.2a-b 10003 version, except as noted. + * 1.0.3 10003 + * 1.0.3a-d 10004 + * 1.0.4 10004 + * 1.0.4a-f 10005 + * 1.0.5 (+ 2 patches) 10005 + * 1.0.5a-d 10006 + * 1.0.5e-r 10100 (not source compatible) + * 1.0.5s-v 10006 (not binary compatible) + * 1.0.6 (+ 3 patches) 10006 (still binary incompatible) + * 1.0.6d-f 10007 (still binary incompatible) + * 1.0.6g 10007 + * 1.0.6h 10007 10.6h (testing xy.z so-numbering) + * 1.0.6i 10007 10.6i + * 1.0.6j 10007 2.1.0.6j (incompatible with 1.0.0) + * 1.0.7beta11-14 DLLNUM 10007 2.1.0.7beta11-14 (binary compatible) + * 1.0.7beta15-18 1 10007 2.1.0.7beta15-18 (binary compatible) + * 1.0.7rc1-2 1 10007 2.1.0.7rc1-2 (binary compatible) + * 1.0.7 1 10007 (still compatible) + * ... + * 1.0.69 10 10069 10.so.0.69[.0] + * ... + * 1.2.59 13 10259 12.so.0.59[.0] + * ... + * 1.4.20 14 10420 14.so.0.20[.0] + * ... + * 1.5.30 15 10530 15.so.15.30[.0] + * ... + * 1.6.47 16 10647 16.so.16.47[.0] + * + * Henceforth the source version will match the shared-library major and + * minor numbers; the shared-library major version number will be used for + * changes in backward compatibility, as it is intended. + * The PNG_LIBPNG_VER macro, which is not used within libpng but is + * available for applications, is an unsigned integer of the form XYYZZ + * corresponding to the source version X.Y.Z (leading zeros in Y and Z). + * Beta versions were given the previous public release number plus a + * letter, until version 1.0.6j; from then on they were given the upcoming + * public release number plus "betaNN" or "rcNN". + * + * Binary incompatibility exists only when applications make direct access + * to the info_ptr or png_ptr members through png.h, and the compiled + * application is loaded with a different version of the library. + * + * See libpng.txt or libpng.3 for more information. The PNG specification + * is available as a W3C Recommendation and as an ISO/IEC Standard; see + * + */ + +#ifndef PNG_H +#define PNG_H + +/* This is not the place to learn how to use libpng. The file libpng-manual.txt + * describes how to use libpng, and the file example.c summarizes it + * with some code on which to build. This file is useful for looking + * at the actual function definitions and structure components. If that + * file has been stripped from your copy of libpng, you can find it at + * + * + * If you just need to read a PNG file and don't want to read the documentation + * skip to the end of this file and read the section entitled 'simplified API'. + */ + +/* Version information for png.h - this should match the version in png.c */ +#define PNG_LIBPNG_VER_STRING "1.6.47" +#define PNG_HEADER_VERSION_STRING " libpng version " PNG_LIBPNG_VER_STRING "\n" + +/* The versions of shared library builds should stay in sync, going forward */ +#define PNG_LIBPNG_VER_SHAREDLIB 16 +#define PNG_LIBPNG_VER_SONUM PNG_LIBPNG_VER_SHAREDLIB /* [Deprecated] */ +#define PNG_LIBPNG_VER_DLLNUM PNG_LIBPNG_VER_SHAREDLIB /* [Deprecated] */ + +/* These should match the first 3 components of PNG_LIBPNG_VER_STRING: */ +#define PNG_LIBPNG_VER_MAJOR 1 +#define PNG_LIBPNG_VER_MINOR 6 +#define PNG_LIBPNG_VER_RELEASE 47 + +/* This should be zero for a public release, or non-zero for a + * development version. + */ +#define PNG_LIBPNG_VER_BUILD 0 + +/* Release Status */ +#define PNG_LIBPNG_BUILD_ALPHA 1 +#define PNG_LIBPNG_BUILD_BETA 2 +#define PNG_LIBPNG_BUILD_RC 3 +#define PNG_LIBPNG_BUILD_STABLE 4 +#define PNG_LIBPNG_BUILD_RELEASE_STATUS_MASK 7 + +/* Release-Specific Flags */ +#define PNG_LIBPNG_BUILD_PATCH 8 /* Can be OR'ed with + PNG_LIBPNG_BUILD_STABLE only */ +#define PNG_LIBPNG_BUILD_PRIVATE 16 /* Cannot be OR'ed with + PNG_LIBPNG_BUILD_SPECIAL */ +#define PNG_LIBPNG_BUILD_SPECIAL 32 /* Cannot be OR'ed with + PNG_LIBPNG_BUILD_PRIVATE */ + +#define PNG_LIBPNG_BUILD_BASE_TYPE PNG_LIBPNG_BUILD_STABLE + +/* Careful here. At one time, Guy wanted to use 082, but that + * would be octal. We must not include leading zeros. + * Versions 0.7 through 1.0.0 were in the range 0 to 100 here + * (only version 1.0.0 was mis-numbered 100 instead of 10000). + * From version 1.0.1 it is: + * XXYYZZ, where XX=major, YY=minor, ZZ=release + */ +#define PNG_LIBPNG_VER 10647 /* 1.6.47 */ + +/* Library configuration: these options cannot be changed after + * the library has been built. + */ +#ifndef PNGLCONF_H +/* If pnglibconf.h is missing, you can + * copy scripts/pnglibconf.h.prebuilt to pnglibconf.h + */ +# include "pnglibconf.h" +#endif + +#ifndef PNG_VERSION_INFO_ONLY +/* Machine specific configuration. */ +# include "pngconf.h" +#endif + +/* + * Added at libpng-1.2.8 + * + * Ref MSDN: Private as priority over Special + * VS_FF_PRIVATEBUILD File *was not* built using standard release + * procedures. If this value is given, the StringFileInfo block must + * contain a PrivateBuild string. + * + * VS_FF_SPECIALBUILD File *was* built by the original company using + * standard release procedures but is a variation of the standard + * file of the same version number. If this value is given, the + * StringFileInfo block must contain a SpecialBuild string. + */ + +#ifdef PNG_USER_PRIVATEBUILD /* From pnglibconf.h */ +# define PNG_LIBPNG_BUILD_TYPE \ + (PNG_LIBPNG_BUILD_BASE_TYPE | PNG_LIBPNG_BUILD_PRIVATE) +#else +# ifdef PNG_LIBPNG_SPECIALBUILD +# define PNG_LIBPNG_BUILD_TYPE \ + (PNG_LIBPNG_BUILD_BASE_TYPE | PNG_LIBPNG_BUILD_SPECIAL) +# else +# define PNG_LIBPNG_BUILD_TYPE (PNG_LIBPNG_BUILD_BASE_TYPE) +# endif +#endif + +#ifndef PNG_VERSION_INFO_ONLY + +/* Inhibit C++ name-mangling for libpng functions but not for system calls. */ +#ifdef __cplusplus +extern "C" { +#endif /* __cplusplus */ + +/* Version information for C files, stored in png.c. This had better match + * the version above. + */ +#define png_libpng_ver png_get_header_ver(NULL) + +/* This file is arranged in several sections: + * + * 1. [omitted] + * 2. Any configuration options that can be specified by for the application + * code when it is built. (Build time configuration is in pnglibconf.h) + * 3. Type definitions (base types are defined in pngconf.h), structure + * definitions. + * 4. Exported library functions. + * 5. Simplified API. + * 6. Implementation options. + * + * The library source code has additional files (principally pngpriv.h) that + * allow configuration of the library. + */ + +/* Section 1: [omitted] */ + +/* Section 2: run time configuration + * See pnglibconf.h for build time configuration + * + * Run time configuration allows the application to choose between + * implementations of certain arithmetic APIs. The default is set + * at build time and recorded in pnglibconf.h, but it is safe to + * override these (and only these) settings. Note that this won't + * change what the library does, only application code, and the + * settings can (and probably should) be made on a per-file basis + * by setting the #defines before including png.h + * + * Use macros to read integers from PNG data or use the exported + * functions? + * PNG_USE_READ_MACROS: use the macros (see below) Note that + * the macros evaluate their argument multiple times. + * PNG_NO_USE_READ_MACROS: call the relevant library function. + * + * Use the alternative algorithm for compositing alpha samples that + * does not use division? + * PNG_READ_COMPOSITE_NODIV_SUPPORTED: use the 'no division' + * algorithm. + * PNG_NO_READ_COMPOSITE_NODIV: use the 'division' algorithm. + * + * How to handle benign errors if PNG_ALLOW_BENIGN_ERRORS is + * false? + * PNG_ALLOW_BENIGN_ERRORS: map calls to the benign error + * APIs to png_warning. + * Otherwise the calls are mapped to png_error. + */ + +/* Section 3: type definitions, including structures and compile time + * constants. + * See pngconf.h for base types that vary by machine/system + */ + +/* This triggers a compiler error in png.c, if png.c and png.h + * do not agree upon the version number. + */ +typedef char* png_libpng_version_1_6_47; + +/* Basic control structions. Read libpng-manual.txt or libpng.3 for more info. + * + * png_struct is the cache of information used while reading or writing a single + * PNG file. One of these is always required, although the simplified API + * (below) hides the creation and destruction of it. + */ +typedef struct png_struct_def png_struct; +typedef const png_struct * png_const_structp; +typedef png_struct * png_structp; +typedef png_struct * * png_structpp; + +/* png_info contains information read from or to be written to a PNG file. One + * or more of these must exist while reading or creating a PNG file. The + * information is not used by libpng during read but is used to control what + * gets written when a PNG file is created. "png_get_" function calls read + * information during read and "png_set_" functions calls write information + * when creating a PNG. + * been moved into a separate header file that is not accessible to + * applications. Read libpng-manual.txt or libpng.3 for more info. + */ +typedef struct png_info_def png_info; +typedef png_info * png_infop; +typedef const png_info * png_const_infop; +typedef png_info * * png_infopp; + +/* Types with names ending 'p' are pointer types. The corresponding types with + * names ending 'rp' are identical pointer types except that the pointer is + * marked 'restrict', which means that it is the only pointer to the object + * passed to the function. Applications should not use the 'restrict' types; + * it is always valid to pass 'p' to a pointer with a function argument of the + * corresponding 'rp' type. Different compilers have different rules with + * regard to type matching in the presence of 'restrict'. For backward + * compatibility libpng callbacks never have 'restrict' in their parameters and, + * consequentially, writing portable application code is extremely difficult if + * an attempt is made to use 'restrict'. + */ +typedef png_struct * PNG_RESTRICT png_structrp; +typedef const png_struct * PNG_RESTRICT png_const_structrp; +typedef png_info * PNG_RESTRICT png_inforp; +typedef const png_info * PNG_RESTRICT png_const_inforp; + +/* Three color definitions. The order of the red, green, and blue, (and the + * exact size) is not important, although the size of the fields need to + * be png_byte or png_uint_16 (as defined below). + */ +typedef struct png_color_struct +{ + png_byte red; + png_byte green; + png_byte blue; +} png_color; +typedef png_color * png_colorp; +typedef const png_color * png_const_colorp; +typedef png_color * * png_colorpp; + +typedef struct png_color_16_struct +{ + png_byte index; /* used for palette files */ + png_uint_16 red; /* for use in red green blue files */ + png_uint_16 green; + png_uint_16 blue; + png_uint_16 gray; /* for use in grayscale files */ +} png_color_16; +typedef png_color_16 * png_color_16p; +typedef const png_color_16 * png_const_color_16p; +typedef png_color_16 * * png_color_16pp; + +typedef struct png_color_8_struct +{ + png_byte red; /* for use in red green blue files */ + png_byte green; + png_byte blue; + png_byte gray; /* for use in grayscale files */ + png_byte alpha; /* for alpha channel files */ +} png_color_8; +typedef png_color_8 * png_color_8p; +typedef const png_color_8 * png_const_color_8p; +typedef png_color_8 * * png_color_8pp; + +/* + * The following two structures are used for the in-core representation + * of sPLT chunks. + */ +typedef struct png_sPLT_entry_struct +{ + png_uint_16 red; + png_uint_16 green; + png_uint_16 blue; + png_uint_16 alpha; + png_uint_16 frequency; +} png_sPLT_entry; +typedef png_sPLT_entry * png_sPLT_entryp; +typedef const png_sPLT_entry * png_const_sPLT_entryp; +typedef png_sPLT_entry * * png_sPLT_entrypp; + +/* When the depth of the sPLT palette is 8 bits, the color and alpha samples + * occupy the LSB of their respective members, and the MSB of each member + * is zero-filled. The frequency member always occupies the full 16 bits. + */ + +typedef struct png_sPLT_struct +{ + png_charp name; /* palette name */ + png_byte depth; /* depth of palette samples */ + png_sPLT_entryp entries; /* palette entries */ + png_int_32 nentries; /* number of palette entries */ +} png_sPLT_t; +typedef png_sPLT_t * png_sPLT_tp; +typedef const png_sPLT_t * png_const_sPLT_tp; +typedef png_sPLT_t * * png_sPLT_tpp; + +#ifdef PNG_TEXT_SUPPORTED +/* png_text holds the contents of a text/ztxt/itxt chunk in a PNG file, + * and whether that contents is compressed or not. The "key" field + * points to a regular zero-terminated C string. The "text" fields can be a + * regular C string, an empty string, or a NULL pointer. + * However, the structure returned by png_get_text() will always contain + * the "text" field as a regular zero-terminated C string (possibly + * empty), never a NULL pointer, so it can be safely used in printf() and + * other string-handling functions. Note that the "itxt_length", "lang", and + * "lang_key" members of the structure only exist when the library is built + * with iTXt chunk support. Prior to libpng-1.4.0 the library was built by + * default without iTXt support. Also note that when iTXt *is* supported, + * the "lang" and "lang_key" fields contain NULL pointers when the + * "compression" field contains * PNG_TEXT_COMPRESSION_NONE or + * PNG_TEXT_COMPRESSION_zTXt. Note that the "compression value" is not the + * same as what appears in the PNG tEXt/zTXt/iTXt chunk's "compression flag" + * which is always 0 or 1, or its "compression method" which is always 0. + */ +typedef struct png_text_struct +{ + int compression; /* compression value: + -1: tEXt, none + 0: zTXt, deflate + 1: iTXt, none + 2: iTXt, deflate */ + png_charp key; /* keyword, 1-79 character description of "text" */ + png_charp text; /* comment, may be an empty string (ie "") + or a NULL pointer */ + size_t text_length; /* length of the text string */ + size_t itxt_length; /* length of the itxt string */ + png_charp lang; /* language code, 0-79 characters + or a NULL pointer */ + png_charp lang_key; /* keyword translated UTF-8 string, 0 or more + chars or a NULL pointer */ +} png_text; +typedef png_text * png_textp; +typedef const png_text * png_const_textp; +typedef png_text * * png_textpp; +#endif + +/* Supported compression types for text in PNG files (tEXt, and zTXt). + * The values of the PNG_TEXT_COMPRESSION_ defines should NOT be changed. */ +#define PNG_TEXT_COMPRESSION_NONE_WR -3 +#define PNG_TEXT_COMPRESSION_zTXt_WR -2 +#define PNG_TEXT_COMPRESSION_NONE -1 +#define PNG_TEXT_COMPRESSION_zTXt 0 +#define PNG_ITXT_COMPRESSION_NONE 1 +#define PNG_ITXT_COMPRESSION_zTXt 2 +#define PNG_TEXT_COMPRESSION_LAST 3 /* Not a valid value */ + +/* png_time is a way to hold the time in an machine independent way. + * Two conversions are provided, both from time_t and struct tm. There + * is no portable way to convert to either of these structures, as far + * as I know. If you know of a portable way, send it to me. As a side + * note - PNG has always been Year 2000 compliant! + */ +typedef struct png_time_struct +{ + png_uint_16 year; /* full year, as in, 1995 */ + png_byte month; /* month of year, 1 - 12 */ + png_byte day; /* day of month, 1 - 31 */ + png_byte hour; /* hour of day, 0 - 23 */ + png_byte minute; /* minute of hour, 0 - 59 */ + png_byte second; /* second of minute, 0 - 60 (for leap seconds) */ +} png_time; +typedef png_time * png_timep; +typedef const png_time * png_const_timep; +typedef png_time * * png_timepp; + +#if defined(PNG_STORE_UNKNOWN_CHUNKS_SUPPORTED) ||\ + defined(PNG_USER_CHUNKS_SUPPORTED) +/* png_unknown_chunk is a structure to hold queued chunks for which there is + * no specific support. The idea is that we can use this to queue + * up private chunks for output even though the library doesn't actually + * know about their semantics. + * + * The data in the structure is set by libpng on read and used on write. + */ +typedef struct png_unknown_chunk_t +{ + png_byte name[5]; /* Textual chunk name with '\0' terminator */ + png_byte *data; /* Data, should not be modified on read! */ + size_t size; + + /* On write 'location' must be set using the flag values listed below. + * Notice that on read it is set by libpng however the values stored have + * more bits set than are listed below. Always treat the value as a + * bitmask. On write set only one bit - setting multiple bits may cause the + * chunk to be written in multiple places. + */ + png_byte location; /* mode of operation at read time */ +} +png_unknown_chunk; + +typedef png_unknown_chunk * png_unknown_chunkp; +typedef const png_unknown_chunk * png_const_unknown_chunkp; +typedef png_unknown_chunk * * png_unknown_chunkpp; +#endif + +/* Flag values for the unknown chunk location byte. */ +#define PNG_HAVE_IHDR 0x01 +#define PNG_HAVE_PLTE 0x02 +#define PNG_AFTER_IDAT 0x08 + +/* Maximum positive integer used in PNG is (2^31)-1 */ +#define PNG_UINT_31_MAX ((png_uint_32)0x7fffffffL) +#define PNG_UINT_32_MAX ((png_uint_32)(-1)) +#define PNG_SIZE_MAX ((size_t)(-1)) + +/* These are constants for fixed point values encoded in the + * PNG specification manner (x100000) + */ +#define PNG_FP_1 100000 +#define PNG_FP_HALF 50000 +#define PNG_FP_MAX ((png_fixed_point)0x7fffffffL) +#define PNG_FP_MIN (-PNG_FP_MAX) + +/* These describe the color_type field in png_info. */ +/* color type masks */ +#define PNG_COLOR_MASK_PALETTE 1 +#define PNG_COLOR_MASK_COLOR 2 +#define PNG_COLOR_MASK_ALPHA 4 + +/* color types. Note that not all combinations are legal */ +#define PNG_COLOR_TYPE_GRAY 0 +#define PNG_COLOR_TYPE_PALETTE (PNG_COLOR_MASK_COLOR | PNG_COLOR_MASK_PALETTE) +#define PNG_COLOR_TYPE_RGB (PNG_COLOR_MASK_COLOR) +#define PNG_COLOR_TYPE_RGB_ALPHA (PNG_COLOR_MASK_COLOR | PNG_COLOR_MASK_ALPHA) +#define PNG_COLOR_TYPE_GRAY_ALPHA (PNG_COLOR_MASK_ALPHA) +/* aliases */ +#define PNG_COLOR_TYPE_RGBA PNG_COLOR_TYPE_RGB_ALPHA +#define PNG_COLOR_TYPE_GA PNG_COLOR_TYPE_GRAY_ALPHA + +/* This is for compression type. PNG 1.0-1.2 only define the single type. */ +#define PNG_COMPRESSION_TYPE_BASE 0 /* Deflate method 8, 32K window */ +#define PNG_COMPRESSION_TYPE_DEFAULT PNG_COMPRESSION_TYPE_BASE + +/* This is for filter type. PNG 1.0-1.2 only define the single type. */ +#define PNG_FILTER_TYPE_BASE 0 /* Single row per-byte filtering */ +#define PNG_INTRAPIXEL_DIFFERENCING 64 /* Used only in MNG datastreams */ +#define PNG_FILTER_TYPE_DEFAULT PNG_FILTER_TYPE_BASE + +/* These are for the interlacing type. These values should NOT be changed. */ +#define PNG_INTERLACE_NONE 0 /* Non-interlaced image */ +#define PNG_INTERLACE_ADAM7 1 /* Adam7 interlacing */ +#define PNG_INTERLACE_LAST 2 /* Not a valid value */ + +/* These are for the oFFs chunk. These values should NOT be changed. */ +#define PNG_OFFSET_PIXEL 0 /* Offset in pixels */ +#define PNG_OFFSET_MICROMETER 1 /* Offset in micrometers (1/10^6 meter) */ +#define PNG_OFFSET_LAST 2 /* Not a valid value */ + +/* These are for the pCAL chunk. These values should NOT be changed. */ +#define PNG_EQUATION_LINEAR 0 /* Linear transformation */ +#define PNG_EQUATION_BASE_E 1 /* Exponential base e transform */ +#define PNG_EQUATION_ARBITRARY 2 /* Arbitrary base exponential transform */ +#define PNG_EQUATION_HYPERBOLIC 3 /* Hyperbolic sine transformation */ +#define PNG_EQUATION_LAST 4 /* Not a valid value */ + +/* These are for the sCAL chunk. These values should NOT be changed. */ +#define PNG_SCALE_UNKNOWN 0 /* unknown unit (image scale) */ +#define PNG_SCALE_METER 1 /* meters per pixel */ +#define PNG_SCALE_RADIAN 2 /* radians per pixel */ +#define PNG_SCALE_LAST 3 /* Not a valid value */ + +/* These are for the pHYs chunk. These values should NOT be changed. */ +#define PNG_RESOLUTION_UNKNOWN 0 /* pixels/unknown unit (aspect ratio) */ +#define PNG_RESOLUTION_METER 1 /* pixels/meter */ +#define PNG_RESOLUTION_LAST 2 /* Not a valid value */ + +/* These are for the sRGB chunk. These values should NOT be changed. */ +#define PNG_sRGB_INTENT_PERCEPTUAL 0 +#define PNG_sRGB_INTENT_RELATIVE 1 +#define PNG_sRGB_INTENT_SATURATION 2 +#define PNG_sRGB_INTENT_ABSOLUTE 3 +#define PNG_sRGB_INTENT_LAST 4 /* Not a valid value */ + +/* This is for text chunks */ +#define PNG_KEYWORD_MAX_LENGTH 79 + +/* Maximum number of entries in PLTE/sPLT/tRNS arrays */ +#define PNG_MAX_PALETTE_LENGTH 256 + +/* These determine if an ancillary chunk's data has been successfully read + * from the PNG header, or if the application has filled in the corresponding + * data in the info_struct to be written into the output file. The values + * of the PNG_INFO_ defines should NOT be changed. + */ +#define PNG_INFO_gAMA 0x0001U +#define PNG_INFO_sBIT 0x0002U +#define PNG_INFO_cHRM 0x0004U +#define PNG_INFO_PLTE 0x0008U +#define PNG_INFO_tRNS 0x0010U +#define PNG_INFO_bKGD 0x0020U +#define PNG_INFO_hIST 0x0040U +#define PNG_INFO_pHYs 0x0080U +#define PNG_INFO_oFFs 0x0100U +#define PNG_INFO_tIME 0x0200U +#define PNG_INFO_pCAL 0x0400U +#define PNG_INFO_sRGB 0x0800U /* GR-P, 0.96a */ +#define PNG_INFO_iCCP 0x1000U /* ESR, 1.0.6 */ +#define PNG_INFO_sPLT 0x2000U /* ESR, 1.0.6 */ +#define PNG_INFO_sCAL 0x4000U /* ESR, 1.0.6 */ +#define PNG_INFO_IDAT 0x8000U /* ESR, 1.0.6 */ +#define PNG_INFO_eXIf 0x10000U /* GR-P, 1.6.31 */ +#define PNG_INFO_cICP 0x20000U /* PNGv3: 1.6.45 */ +#define PNG_INFO_cLLI 0x40000U /* PNGv3: 1.6.45 */ +#define PNG_INFO_mDCV 0x80000U /* PNGv3: 1.6.45 */ +/* APNG: these chunks are stored as unknown, these flags are never set + * however they are provided as a convenience for implementors of APNG and + * avoids any merge conflicts. + * + * Private chunks: these chunk names violate the chunk name recommendations + * because the chunk definitions have no signature and because the private + * chunks with these names have been reserved. Private definitions should + * avoid them. + */ +#define PNG_INFO_acTL 0x100000U /* PNGv3: 1.6.45: unknown */ +#define PNG_INFO_fcTL 0x200000U /* PNGv3: 1.6.45: unknown */ +#define PNG_INFO_fdAT 0x400000U /* PNGv3: 1.6.45: unknown */ + +/* This is used for the transformation routines, as some of them + * change these values for the row. It also should enable using + * the routines for other purposes. + */ +typedef struct png_row_info_struct +{ + png_uint_32 width; /* width of row */ + size_t rowbytes; /* number of bytes in row */ + png_byte color_type; /* color type of row */ + png_byte bit_depth; /* bit depth of row */ + png_byte channels; /* number of channels (1, 2, 3, or 4) */ + png_byte pixel_depth; /* bits per pixel (depth * channels) */ +} png_row_info; + +typedef png_row_info * png_row_infop; +typedef png_row_info * * png_row_infopp; + +/* These are the function types for the I/O functions and for the functions + * that allow the user to override the default I/O functions with his or her + * own. The png_error_ptr type should match that of user-supplied warning + * and error functions, while the png_rw_ptr type should match that of the + * user read/write data functions. Note that the 'write' function must not + * modify the buffer it is passed. The 'read' function, on the other hand, is + * expected to return the read data in the buffer. + */ +typedef PNG_CALLBACK(void, *png_error_ptr, (png_structp, png_const_charp)); +typedef PNG_CALLBACK(void, *png_rw_ptr, (png_structp, png_bytep, size_t)); +typedef PNG_CALLBACK(void, *png_flush_ptr, (png_structp)); +typedef PNG_CALLBACK(void, *png_read_status_ptr, (png_structp, png_uint_32, + int)); +typedef PNG_CALLBACK(void, *png_write_status_ptr, (png_structp, png_uint_32, + int)); + +#ifdef PNG_PROGRESSIVE_READ_SUPPORTED +typedef PNG_CALLBACK(void, *png_progressive_info_ptr, (png_structp, png_infop)); +typedef PNG_CALLBACK(void, *png_progressive_end_ptr, (png_structp, png_infop)); + +/* The following callback receives png_uint_32 row_number, int pass for the + * png_bytep data of the row. When transforming an interlaced image the + * row number is the row number within the sub-image of the interlace pass, so + * the value will increase to the height of the sub-image (not the full image) + * then reset to 0 for the next pass. + * + * Use PNG_ROW_FROM_PASS_ROW(row, pass) and PNG_COL_FROM_PASS_COL(col, pass) to + * find the output pixel (x,y) given an interlaced sub-image pixel + * (row,col,pass). (See below for these macros.) + */ +typedef PNG_CALLBACK(void, *png_progressive_row_ptr, (png_structp, png_bytep, + png_uint_32, int)); +#endif + +#if defined(PNG_READ_USER_TRANSFORM_SUPPORTED) || \ + defined(PNG_WRITE_USER_TRANSFORM_SUPPORTED) +typedef PNG_CALLBACK(void, *png_user_transform_ptr, (png_structp, png_row_infop, + png_bytep)); +#endif + +#ifdef PNG_USER_CHUNKS_SUPPORTED +typedef PNG_CALLBACK(int, *png_user_chunk_ptr, (png_structp, + png_unknown_chunkp)); +#endif +#ifdef PNG_UNKNOWN_CHUNKS_SUPPORTED +/* not used anywhere */ +/* typedef PNG_CALLBACK(void, *png_unknown_chunk_ptr, (png_structp)); */ +#endif + +#ifdef PNG_SETJMP_SUPPORTED +/* This must match the function definition in , and the application + * must include this before png.h to obtain the definition of jmp_buf. The + * function is required to be PNG_NORETURN, but this is not checked. If the + * function does return the application will crash via an abort() or similar + * system level call. + * + * If you get a warning here while building the library you may need to make + * changes to ensure that pnglibconf.h records the calling convention used by + * your compiler. This may be very difficult - try using a different compiler + * to build the library! + */ +PNG_FUNCTION(void, (PNGCAPI *png_longjmp_ptr), (jmp_buf, int), typedef); +#endif + +/* Transform masks for the high-level interface */ +#define PNG_TRANSFORM_IDENTITY 0x0000 /* read and write */ +#define PNG_TRANSFORM_STRIP_16 0x0001 /* read only */ +#define PNG_TRANSFORM_STRIP_ALPHA 0x0002 /* read only */ +#define PNG_TRANSFORM_PACKING 0x0004 /* read and write */ +#define PNG_TRANSFORM_PACKSWAP 0x0008 /* read and write */ +#define PNG_TRANSFORM_EXPAND 0x0010 /* read only */ +#define PNG_TRANSFORM_INVERT_MONO 0x0020 /* read and write */ +#define PNG_TRANSFORM_SHIFT 0x0040 /* read and write */ +#define PNG_TRANSFORM_BGR 0x0080 /* read and write */ +#define PNG_TRANSFORM_SWAP_ALPHA 0x0100 /* read and write */ +#define PNG_TRANSFORM_SWAP_ENDIAN 0x0200 /* read and write */ +#define PNG_TRANSFORM_INVERT_ALPHA 0x0400 /* read and write */ +#define PNG_TRANSFORM_STRIP_FILLER 0x0800 /* write only */ +/* Added to libpng-1.2.34 */ +#define PNG_TRANSFORM_STRIP_FILLER_BEFORE PNG_TRANSFORM_STRIP_FILLER +#define PNG_TRANSFORM_STRIP_FILLER_AFTER 0x1000 /* write only */ +/* Added to libpng-1.4.0 */ +#define PNG_TRANSFORM_GRAY_TO_RGB 0x2000 /* read only */ +/* Added to libpng-1.5.4 */ +#define PNG_TRANSFORM_EXPAND_16 0x4000 /* read only */ +#if ~0U > 0xffffU /* or else this might break on a 16-bit machine */ +#define PNG_TRANSFORM_SCALE_16 0x8000 /* read only */ +#endif + +/* Flags for MNG supported features */ +#define PNG_FLAG_MNG_EMPTY_PLTE 0x01 +#define PNG_FLAG_MNG_FILTER_64 0x04 +#define PNG_ALL_MNG_FEATURES 0x05 + +/* NOTE: prior to 1.5 these functions had no 'API' style declaration, + * this allowed the zlib default functions to be used on Windows + * platforms. In 1.5 the zlib default malloc (which just calls malloc and + * ignores the first argument) should be completely compatible with the + * following. + */ +typedef PNG_CALLBACK(png_voidp, *png_malloc_ptr, (png_structp, + png_alloc_size_t)); +typedef PNG_CALLBACK(void, *png_free_ptr, (png_structp, png_voidp)); + +/* Section 4: exported functions + * Here are the function definitions most commonly used. This is not + * the place to find out how to use libpng. See libpng-manual.txt for the + * full explanation, see example.c for the summary. This just provides + * a simple one line description of the use of each function. + * + * The PNG_EXPORT() and PNG_EXPORTA() macros used below are defined in + * pngconf.h and in the *.dfn files in the scripts directory. + * + * PNG_EXPORT(ordinal, type, name, (args)); + * + * ordinal: ordinal that is used while building + * *.def files. The ordinal value is only + * relevant when preprocessing png.h with + * the *.dfn files for building symbol table + * entries, and are removed by pngconf.h. + * type: return type of the function + * name: function name + * args: function arguments, with types + * + * When we wish to append attributes to a function prototype we use + * the PNG_EXPORTA() macro instead. + * + * PNG_EXPORTA(ordinal, type, name, (args), attributes); + * + * ordinal, type, name, and args: same as in PNG_EXPORT(). + * attributes: function attributes + */ + +/* Returns the version number of the library */ +PNG_EXPORT(1, png_uint_32, png_access_version_number, (void)); + +/* Tell lib we have already handled the first magic bytes. + * Handling more than 8 bytes from the beginning of the file is an error. + */ +PNG_EXPORT(2, void, png_set_sig_bytes, (png_structrp png_ptr, int num_bytes)); + +/* Check sig[start] through sig[start + num_to_check - 1] to see if it's a + * PNG file. Returns zero if the supplied bytes match the 8-byte PNG + * signature, and non-zero otherwise. Having num_to_check == 0 or + * start > 7 will always fail (i.e. return non-zero). + */ +PNG_EXPORT(3, int, png_sig_cmp, (png_const_bytep sig, size_t start, + size_t num_to_check)); + +/* Simple signature checking function. This is the same as calling + * png_check_sig(sig, n) := (png_sig_cmp(sig, 0, n) == 0). + */ +#define png_check_sig(sig, n) (png_sig_cmp((sig), 0, (n)) == 0) /* DEPRECATED */ + +/* Allocate and initialize png_ptr struct for reading, and any other memory. */ +PNG_EXPORTA(4, png_structp, png_create_read_struct, + (png_const_charp user_png_ver, png_voidp error_ptr, + png_error_ptr error_fn, png_error_ptr warn_fn), + PNG_ALLOCATED); + +/* Allocate and initialize png_ptr struct for writing, and any other memory */ +PNG_EXPORTA(5, png_structp, png_create_write_struct, + (png_const_charp user_png_ver, png_voidp error_ptr, png_error_ptr error_fn, + png_error_ptr warn_fn), + PNG_ALLOCATED); + +PNG_EXPORT(6, size_t, png_get_compression_buffer_size, + (png_const_structrp png_ptr)); + +PNG_EXPORT(7, void, png_set_compression_buffer_size, (png_structrp png_ptr, + size_t size)); + +/* Moved from pngconf.h in 1.4.0 and modified to ensure setjmp/longjmp + * match up. + */ +#ifdef PNG_SETJMP_SUPPORTED +/* This function returns the jmp_buf built in to *png_ptr. It must be + * supplied with an appropriate 'longjmp' function to use on that jmp_buf + * unless the default error function is overridden in which case NULL is + * acceptable. The size of the jmp_buf is checked against the actual size + * allocated by the library - the call will return NULL on a mismatch + * indicating an ABI mismatch. + */ +PNG_EXPORT(8, jmp_buf*, png_set_longjmp_fn, (png_structrp png_ptr, + png_longjmp_ptr longjmp_fn, size_t jmp_buf_size)); +# define png_jmpbuf(png_ptr) \ + (*png_set_longjmp_fn((png_ptr), longjmp, (sizeof (jmp_buf)))) +#else +# define png_jmpbuf(png_ptr) \ + (LIBPNG_WAS_COMPILED_WITH__PNG_NO_SETJMP) +#endif +/* This function should be used by libpng applications in place of + * longjmp(png_ptr->jmpbuf, val). If longjmp_fn() has been set, it + * will use it; otherwise it will call PNG_ABORT(). This function was + * added in libpng-1.5.0. + */ +PNG_EXPORTA(9, void, png_longjmp, (png_const_structrp png_ptr, int val), + PNG_NORETURN); + +#ifdef PNG_READ_SUPPORTED +/* Reset the compression stream */ +PNG_EXPORTA(10, int, png_reset_zstream, (png_structrp png_ptr), PNG_DEPRECATED); +#endif + +/* New functions added in libpng-1.0.2 (not enabled by default until 1.2.0) */ +#ifdef PNG_USER_MEM_SUPPORTED +PNG_EXPORTA(11, png_structp, png_create_read_struct_2, + (png_const_charp user_png_ver, png_voidp error_ptr, png_error_ptr error_fn, + png_error_ptr warn_fn, + png_voidp mem_ptr, png_malloc_ptr malloc_fn, png_free_ptr free_fn), + PNG_ALLOCATED); +PNG_EXPORTA(12, png_structp, png_create_write_struct_2, + (png_const_charp user_png_ver, png_voidp error_ptr, png_error_ptr error_fn, + png_error_ptr warn_fn, + png_voidp mem_ptr, png_malloc_ptr malloc_fn, png_free_ptr free_fn), + PNG_ALLOCATED); +#endif + +/* Write the PNG file signature. */ +PNG_EXPORT(13, void, png_write_sig, (png_structrp png_ptr)); + +/* Write a PNG chunk - size, type, (optional) data, CRC. */ +PNG_EXPORT(14, void, png_write_chunk, (png_structrp png_ptr, png_const_bytep + chunk_name, png_const_bytep data, size_t length)); + +/* Write the start of a PNG chunk - length and chunk name. */ +PNG_EXPORT(15, void, png_write_chunk_start, (png_structrp png_ptr, + png_const_bytep chunk_name, png_uint_32 length)); + +/* Write the data of a PNG chunk started with png_write_chunk_start(). */ +PNG_EXPORT(16, void, png_write_chunk_data, (png_structrp png_ptr, + png_const_bytep data, size_t length)); + +/* Finish a chunk started with png_write_chunk_start() (includes CRC). */ +PNG_EXPORT(17, void, png_write_chunk_end, (png_structrp png_ptr)); + +/* Allocate and initialize the info structure */ +PNG_EXPORTA(18, png_infop, png_create_info_struct, (png_const_structrp png_ptr), + PNG_ALLOCATED); + +/* DEPRECATED: this function allowed init structures to be created using the + * default allocation method (typically malloc). Use is deprecated in 1.6.0 and + * the API will be removed in the future. + */ +PNG_EXPORTA(19, void, png_info_init_3, (png_infopp info_ptr, + size_t png_info_struct_size), PNG_DEPRECATED); + +/* Writes all the PNG information before the image. */ +PNG_EXPORT(20, void, png_write_info_before_PLTE, + (png_structrp png_ptr, png_const_inforp info_ptr)); +PNG_EXPORT(21, void, png_write_info, + (png_structrp png_ptr, png_const_inforp info_ptr)); + +#ifdef PNG_SEQUENTIAL_READ_SUPPORTED +/* Read the information before the actual image data. */ +PNG_EXPORT(22, void, png_read_info, + (png_structrp png_ptr, png_inforp info_ptr)); +#endif + +#ifdef PNG_TIME_RFC1123_SUPPORTED + /* Convert to a US string format: there is no localization support in this + * routine. The original implementation used a 29 character buffer in + * png_struct, this will be removed in future versions. + */ +#if PNG_LIBPNG_VER < 10700 +/* To do: remove this from libpng17 (and from libpng17/png.c and pngstruct.h) */ +PNG_EXPORTA(23, png_const_charp, png_convert_to_rfc1123, (png_structrp png_ptr, + png_const_timep ptime),PNG_DEPRECATED); +#endif +PNG_EXPORT(241, int, png_convert_to_rfc1123_buffer, (char out[29], + png_const_timep ptime)); +#endif + +#ifdef PNG_CONVERT_tIME_SUPPORTED +/* Convert from a struct tm to png_time */ +PNG_EXPORT(24, void, png_convert_from_struct_tm, (png_timep ptime, + const struct tm * ttime)); + +/* Convert from time_t to png_time. Uses gmtime() */ +PNG_EXPORT(25, void, png_convert_from_time_t, (png_timep ptime, time_t ttime)); +#endif /* CONVERT_tIME */ + +#ifdef PNG_READ_EXPAND_SUPPORTED +/* Expand data to 24-bit RGB, or 8-bit grayscale, with alpha if available. */ +PNG_EXPORT(26, void, png_set_expand, (png_structrp png_ptr)); +PNG_EXPORT(27, void, png_set_expand_gray_1_2_4_to_8, (png_structrp png_ptr)); +PNG_EXPORT(28, void, png_set_palette_to_rgb, (png_structrp png_ptr)); +PNG_EXPORT(29, void, png_set_tRNS_to_alpha, (png_structrp png_ptr)); +#endif + +#ifdef PNG_READ_EXPAND_16_SUPPORTED +/* Expand to 16-bit channels, forces conversion of palette to RGB and expansion + * of a tRNS chunk if present. + */ +PNG_EXPORT(221, void, png_set_expand_16, (png_structrp png_ptr)); +#endif + +#if defined(PNG_READ_BGR_SUPPORTED) || defined(PNG_WRITE_BGR_SUPPORTED) +/* Use blue, green, red order for pixels. */ +PNG_EXPORT(30, void, png_set_bgr, (png_structrp png_ptr)); +#endif + +#ifdef PNG_READ_GRAY_TO_RGB_SUPPORTED +/* Expand the grayscale to 24-bit RGB if necessary. */ +PNG_EXPORT(31, void, png_set_gray_to_rgb, (png_structrp png_ptr)); +#endif + +#ifdef PNG_READ_RGB_TO_GRAY_SUPPORTED +/* Reduce RGB to grayscale. */ +#define PNG_ERROR_ACTION_NONE 1 +#define PNG_ERROR_ACTION_WARN 2 +#define PNG_ERROR_ACTION_ERROR 3 +#define PNG_RGB_TO_GRAY_DEFAULT (-1)/*for red/green coefficients*/ + +PNG_FP_EXPORT(32, void, png_set_rgb_to_gray, (png_structrp png_ptr, + int error_action, double red, double green)) +PNG_FIXED_EXPORT(33, void, png_set_rgb_to_gray_fixed, (png_structrp png_ptr, + int error_action, png_fixed_point red, png_fixed_point green)) + +PNG_EXPORT(34, png_byte, png_get_rgb_to_gray_status, (png_const_structrp + png_ptr)); +#endif + +#ifdef PNG_BUILD_GRAYSCALE_PALETTE_SUPPORTED +PNG_EXPORT(35, void, png_build_grayscale_palette, (int bit_depth, + png_colorp palette)); +#endif + +#ifdef PNG_READ_ALPHA_MODE_SUPPORTED +/* How the alpha channel is interpreted - this affects how the color channels + * of a PNG file are returned to the calling application when an alpha channel, + * or a tRNS chunk in a palette file, is present. + * + * This has no effect on the way pixels are written into a PNG output + * datastream. The color samples in a PNG datastream are never premultiplied + * with the alpha samples. + * + * The default is to return data according to the PNG specification: the alpha + * channel is a linear measure of the contribution of the pixel to the + * corresponding composited pixel, and the color channels are unassociated + * (not premultiplied). The gamma encoded color channels must be scaled + * according to the contribution and to do this it is necessary to undo + * the encoding, scale the color values, perform the composition and re-encode + * the values. This is the 'PNG' mode. + * + * The alternative is to 'associate' the alpha with the color information by + * storing color channel values that have been scaled by the alpha. + * image. These are the 'STANDARD', 'ASSOCIATED' or 'PREMULTIPLIED' modes + * (the latter being the two common names for associated alpha color channels). + * + * For the 'OPTIMIZED' mode, a pixel is treated as opaque only if the alpha + * value is equal to the maximum value. + * + * The final choice is to gamma encode the alpha channel as well. This is + * broken because, in practice, no implementation that uses this choice + * correctly undoes the encoding before handling alpha composition. Use this + * choice only if other serious errors in the software or hardware you use + * mandate it; the typical serious error is for dark halos to appear around + * opaque areas of the composited PNG image because of arithmetic overflow. + * + * The API function png_set_alpha_mode specifies which of these choices to use + * with an enumerated 'mode' value and the gamma of the required output: + */ +#define PNG_ALPHA_PNG 0 /* according to the PNG standard */ +#define PNG_ALPHA_STANDARD 1 /* according to Porter/Duff */ +#define PNG_ALPHA_ASSOCIATED 1 /* as above; this is the normal practice */ +#define PNG_ALPHA_PREMULTIPLIED 1 /* as above */ +#define PNG_ALPHA_OPTIMIZED 2 /* 'PNG' for opaque pixels, else 'STANDARD' */ +#define PNG_ALPHA_BROKEN 3 /* the alpha channel is gamma encoded */ + +PNG_FP_EXPORT(227, void, png_set_alpha_mode, (png_structrp png_ptr, int mode, + double output_gamma)) +PNG_FIXED_EXPORT(228, void, png_set_alpha_mode_fixed, (png_structrp png_ptr, + int mode, png_fixed_point output_gamma)) +#endif + +#if defined(PNG_GAMMA_SUPPORTED) || defined(PNG_READ_ALPHA_MODE_SUPPORTED) +/* The output_gamma value is a screen gamma in libpng terminology: it expresses + * how to decode the output values, not how they are encoded. + */ +#define PNG_DEFAULT_sRGB -1 /* sRGB gamma and color space */ +#define PNG_GAMMA_MAC_18 -2 /* Old Mac '1.8' gamma and color space */ +#define PNG_GAMMA_sRGB 220000 /* Television standards--matches sRGB gamma */ +#define PNG_GAMMA_LINEAR PNG_FP_1 /* Linear */ +#endif + +/* The following are examples of calls to png_set_alpha_mode to achieve the + * required overall gamma correction and, where necessary, alpha + * premultiplication. + * + * png_set_alpha_mode(pp, PNG_ALPHA_PNG, PNG_DEFAULT_sRGB); + * This is the default libpng handling of the alpha channel - it is not + * pre-multiplied into the color components. In addition the call states + * that the output is for a sRGB system and causes all PNG files without gAMA + * chunks to be assumed to be encoded using sRGB. + * + * png_set_alpha_mode(pp, PNG_ALPHA_PNG, PNG_GAMMA_MAC); + * In this case the output is assumed to be something like an sRGB conformant + * display preceded by a power-law lookup table of power 1.45. This is how + * early Mac systems behaved. + * + * png_set_alpha_mode(pp, PNG_ALPHA_STANDARD, PNG_GAMMA_LINEAR); + * This is the classic Jim Blinn approach and will work in academic + * environments where everything is done by the book. It has the shortcoming + * of assuming that input PNG data with no gamma information is linear - this + * is unlikely to be correct unless the PNG files where generated locally. + * Most of the time the output precision will be so low as to show + * significant banding in dark areas of the image. + * + * png_set_expand_16(pp); + * png_set_alpha_mode(pp, PNG_ALPHA_STANDARD, PNG_DEFAULT_sRGB); + * This is a somewhat more realistic Jim Blinn inspired approach. PNG files + * are assumed to have the sRGB encoding if not marked with a gamma value and + * the output is always 16 bits per component. This permits accurate scaling + * and processing of the data. If you know that your input PNG files were + * generated locally you might need to replace PNG_DEFAULT_sRGB with the + * correct value for your system. + * + * png_set_alpha_mode(pp, PNG_ALPHA_OPTIMIZED, PNG_DEFAULT_sRGB); + * If you just need to composite the PNG image onto an existing background + * and if you control the code that does this you can use the optimization + * setting. In this case you just copy completely opaque pixels to the + * output. For pixels that are not completely transparent (you just skip + * those) you do the composition math using png_composite or png_composite_16 + * below then encode the resultant 8-bit or 16-bit values to match the output + * encoding. + * + * Other cases + * If neither the PNG nor the standard linear encoding work for you because + * of the software or hardware you use then you have a big problem. The PNG + * case will probably result in halos around the image. The linear encoding + * will probably result in a washed out, too bright, image (it's actually too + * contrasty.) Try the ALPHA_OPTIMIZED mode above - this will probably + * substantially reduce the halos. Alternatively try: + * + * png_set_alpha_mode(pp, PNG_ALPHA_BROKEN, PNG_DEFAULT_sRGB); + * This option will also reduce the halos, but there will be slight dark + * halos round the opaque parts of the image where the background is light. + * In the OPTIMIZED mode the halos will be light halos where the background + * is dark. Take your pick - the halos are unavoidable unless you can get + * your hardware/software fixed! (The OPTIMIZED approach is slightly + * faster.) + * + * When the default gamma of PNG files doesn't match the output gamma. + * If you have PNG files with no gamma information png_set_alpha_mode allows + * you to provide a default gamma, but it also sets the output gamma to the + * matching value. If you know your PNG files have a gamma that doesn't + * match the output you can take advantage of the fact that + * png_set_alpha_mode always sets the output gamma but only sets the PNG + * default if it is not already set: + * + * png_set_alpha_mode(pp, PNG_ALPHA_PNG, PNG_DEFAULT_sRGB); + * png_set_alpha_mode(pp, PNG_ALPHA_PNG, PNG_GAMMA_MAC); + * The first call sets both the default and the output gamma values, the + * second call overrides the output gamma without changing the default. This + * is easier than achieving the same effect with png_set_gamma. You must use + * PNG_ALPHA_PNG for the first call - internal checking in png_set_alpha will + * fire if more than one call to png_set_alpha_mode and png_set_background is + * made in the same read operation, however multiple calls with PNG_ALPHA_PNG + * are ignored. + */ + +#ifdef PNG_READ_STRIP_ALPHA_SUPPORTED +PNG_EXPORT(36, void, png_set_strip_alpha, (png_structrp png_ptr)); +#endif + +#if defined(PNG_READ_SWAP_ALPHA_SUPPORTED) || \ + defined(PNG_WRITE_SWAP_ALPHA_SUPPORTED) +PNG_EXPORT(37, void, png_set_swap_alpha, (png_structrp png_ptr)); +#endif + +#if defined(PNG_READ_INVERT_ALPHA_SUPPORTED) || \ + defined(PNG_WRITE_INVERT_ALPHA_SUPPORTED) +PNG_EXPORT(38, void, png_set_invert_alpha, (png_structrp png_ptr)); +#endif + +#if defined(PNG_READ_FILLER_SUPPORTED) || defined(PNG_WRITE_FILLER_SUPPORTED) +/* Add a filler byte to 8-bit or 16-bit Gray or 24-bit or 48-bit RGB images. */ +PNG_EXPORT(39, void, png_set_filler, (png_structrp png_ptr, png_uint_32 filler, + int flags)); +/* The values of the PNG_FILLER_ defines should NOT be changed */ +# define PNG_FILLER_BEFORE 0 +# define PNG_FILLER_AFTER 1 +/* Add an alpha byte to 8-bit or 16-bit Gray or 24-bit or 48-bit RGB images. */ +PNG_EXPORT(40, void, png_set_add_alpha, (png_structrp png_ptr, + png_uint_32 filler, int flags)); +#endif /* READ_FILLER || WRITE_FILLER */ + +#if defined(PNG_READ_SWAP_SUPPORTED) || defined(PNG_WRITE_SWAP_SUPPORTED) +/* Swap bytes in 16-bit depth files. */ +PNG_EXPORT(41, void, png_set_swap, (png_structrp png_ptr)); +#endif + +#if defined(PNG_READ_PACK_SUPPORTED) || defined(PNG_WRITE_PACK_SUPPORTED) +/* Use 1 byte per pixel in 1, 2, or 4-bit depth files. */ +PNG_EXPORT(42, void, png_set_packing, (png_structrp png_ptr)); +#endif + +#if defined(PNG_READ_PACKSWAP_SUPPORTED) || \ + defined(PNG_WRITE_PACKSWAP_SUPPORTED) +/* Swap packing order of pixels in bytes. */ +PNG_EXPORT(43, void, png_set_packswap, (png_structrp png_ptr)); +#endif + +#if defined(PNG_READ_SHIFT_SUPPORTED) || defined(PNG_WRITE_SHIFT_SUPPORTED) +/* Converts files to legal bit depths. */ +PNG_EXPORT(44, void, png_set_shift, (png_structrp png_ptr, png_const_color_8p + true_bits)); +#endif + +#if defined(PNG_READ_INTERLACING_SUPPORTED) || \ + defined(PNG_WRITE_INTERLACING_SUPPORTED) +/* Have the code handle the interlacing. Returns the number of passes. + * MUST be called before png_read_update_info or png_start_read_image, + * otherwise it will not have the desired effect. Note that it is still + * necessary to call png_read_row or png_read_rows png_get_image_height + * times for each pass. +*/ +PNG_EXPORT(45, int, png_set_interlace_handling, (png_structrp png_ptr)); +#endif + +#if defined(PNG_READ_INVERT_SUPPORTED) || defined(PNG_WRITE_INVERT_SUPPORTED) +/* Invert monochrome files */ +PNG_EXPORT(46, void, png_set_invert_mono, (png_structrp png_ptr)); +#endif + +#ifdef PNG_READ_BACKGROUND_SUPPORTED +/* Handle alpha and tRNS by replacing with a background color. Prior to + * libpng-1.5.4 this API must not be called before the PNG file header has been + * read. Doing so will result in unexpected behavior and possible warnings or + * errors if the PNG file contains a bKGD chunk. + */ +PNG_FP_EXPORT(47, void, png_set_background, (png_structrp png_ptr, + png_const_color_16p background_color, int background_gamma_code, + int need_expand, double background_gamma)) +PNG_FIXED_EXPORT(215, void, png_set_background_fixed, (png_structrp png_ptr, + png_const_color_16p background_color, int background_gamma_code, + int need_expand, png_fixed_point background_gamma)) +#endif +#ifdef PNG_READ_BACKGROUND_SUPPORTED +# define PNG_BACKGROUND_GAMMA_UNKNOWN 0 +# define PNG_BACKGROUND_GAMMA_SCREEN 1 +# define PNG_BACKGROUND_GAMMA_FILE 2 +# define PNG_BACKGROUND_GAMMA_UNIQUE 3 +#endif + +#ifdef PNG_READ_SCALE_16_TO_8_SUPPORTED +/* Scale a 16-bit depth file down to 8-bit, accurately. */ +PNG_EXPORT(229, void, png_set_scale_16, (png_structrp png_ptr)); +#endif + +#ifdef PNG_READ_STRIP_16_TO_8_SUPPORTED +#define PNG_READ_16_TO_8_SUPPORTED /* Name prior to 1.5.4 */ +/* Strip the second byte of information from a 16-bit depth file. */ +PNG_EXPORT(48, void, png_set_strip_16, (png_structrp png_ptr)); +#endif + +#ifdef PNG_READ_QUANTIZE_SUPPORTED +/* Turn on quantizing, and reduce the palette to the number of colors + * available. + */ +PNG_EXPORT(49, void, png_set_quantize, (png_structrp png_ptr, + png_colorp palette, int num_palette, int maximum_colors, + png_const_uint_16p histogram, int full_quantize)); +#endif + +#ifdef PNG_READ_GAMMA_SUPPORTED +/* The threshold on gamma processing is configurable but hard-wired into the + * library. The following is the floating point variant. + */ +#define PNG_GAMMA_THRESHOLD (PNG_GAMMA_THRESHOLD_FIXED*.00001) + +/* Handle gamma correction. Screen_gamma=(display_exponent). + * NOTE: this API simply sets the screen and file gamma values. It will + * therefore override the value for gamma in a PNG file if it is called after + * the file header has been read - use with care - call before reading the PNG + * file for best results! + * + * These routines accept the same gamma values as png_set_alpha_mode (described + * above). The PNG_GAMMA_ defines and PNG_DEFAULT_sRGB can be passed to either + * API (floating point or fixed.) Notice, however, that the 'file_gamma' value + * is the inverse of a 'screen gamma' value. + */ +PNG_FP_EXPORT(50, void, png_set_gamma, (png_structrp png_ptr, + double screen_gamma, double override_file_gamma)) +PNG_FIXED_EXPORT(208, void, png_set_gamma_fixed, (png_structrp png_ptr, + png_fixed_point screen_gamma, png_fixed_point override_file_gamma)) +#endif + +#ifdef PNG_WRITE_FLUSH_SUPPORTED +/* Set how many lines between output flushes - 0 for no flushing */ +PNG_EXPORT(51, void, png_set_flush, (png_structrp png_ptr, int nrows)); +/* Flush the current PNG output buffer */ +PNG_EXPORT(52, void, png_write_flush, (png_structrp png_ptr)); +#endif + +/* Optional update palette with requested transformations */ +PNG_EXPORT(53, void, png_start_read_image, (png_structrp png_ptr)); + +/* Optional call to update the users info structure */ +PNG_EXPORT(54, void, png_read_update_info, (png_structrp png_ptr, + png_inforp info_ptr)); + +#ifdef PNG_SEQUENTIAL_READ_SUPPORTED +/* Read one or more rows of image data. */ +PNG_EXPORT(55, void, png_read_rows, (png_structrp png_ptr, png_bytepp row, + png_bytepp display_row, png_uint_32 num_rows)); +#endif + +#ifdef PNG_SEQUENTIAL_READ_SUPPORTED +/* Read a row of data. */ +PNG_EXPORT(56, void, png_read_row, (png_structrp png_ptr, png_bytep row, + png_bytep display_row)); +#endif + +#ifdef PNG_SEQUENTIAL_READ_SUPPORTED +/* Read the whole image into memory at once. */ +PNG_EXPORT(57, void, png_read_image, (png_structrp png_ptr, png_bytepp image)); +#endif + +/* Write a row of image data */ +PNG_EXPORT(58, void, png_write_row, (png_structrp png_ptr, + png_const_bytep row)); + +/* Write a few rows of image data: (*row) is not written; however, the type + * is declared as writeable to maintain compatibility with previous versions + * of libpng and to allow the 'display_row' array from read_rows to be passed + * unchanged to write_rows. + */ +PNG_EXPORT(59, void, png_write_rows, (png_structrp png_ptr, png_bytepp row, + png_uint_32 num_rows)); + +/* Write the image data */ +PNG_EXPORT(60, void, png_write_image, (png_structrp png_ptr, png_bytepp image)); + +/* Write the end of the PNG file. */ +PNG_EXPORT(61, void, png_write_end, (png_structrp png_ptr, + png_inforp info_ptr)); + +#ifdef PNG_SEQUENTIAL_READ_SUPPORTED +/* Read the end of the PNG file. */ +PNG_EXPORT(62, void, png_read_end, (png_structrp png_ptr, png_inforp info_ptr)); +#endif + +/* Free any memory associated with the png_info_struct */ +PNG_EXPORT(63, void, png_destroy_info_struct, (png_const_structrp png_ptr, + png_infopp info_ptr_ptr)); + +/* Free any memory associated with the png_struct and the png_info_structs */ +PNG_EXPORT(64, void, png_destroy_read_struct, (png_structpp png_ptr_ptr, + png_infopp info_ptr_ptr, png_infopp end_info_ptr_ptr)); + +/* Free any memory associated with the png_struct and the png_info_structs */ +PNG_EXPORT(65, void, png_destroy_write_struct, (png_structpp png_ptr_ptr, + png_infopp info_ptr_ptr)); + +/* Set the libpng method of handling chunk CRC errors */ +PNG_EXPORT(66, void, png_set_crc_action, (png_structrp png_ptr, int crit_action, + int ancil_action)); + +/* Values for png_set_crc_action() say how to handle CRC errors in + * ancillary and critical chunks, and whether to use the data contained + * therein. Note that it is impossible to "discard" data in a critical + * chunk. For versions prior to 0.90, the action was always error/quit, + * whereas in version 0.90 and later, the action for CRC errors in ancillary + * chunks is warn/discard. These values should NOT be changed. + * + * value action:critical action:ancillary + */ +#define PNG_CRC_DEFAULT 0 /* error/quit warn/discard data */ +#define PNG_CRC_ERROR_QUIT 1 /* error/quit error/quit */ +#define PNG_CRC_WARN_DISCARD 2 /* (INVALID) warn/discard data */ +#define PNG_CRC_WARN_USE 3 /* warn/use data warn/use data */ +#define PNG_CRC_QUIET_USE 4 /* quiet/use data quiet/use data */ +#define PNG_CRC_NO_CHANGE 5 /* use current value use current value */ + +#ifdef PNG_WRITE_SUPPORTED +/* These functions give the user control over the scan-line filtering in + * libpng and the compression methods used by zlib. These functions are + * mainly useful for testing, as the defaults should work with most users. + * Those users who are tight on memory or want faster performance at the + * expense of compression can modify them. See the compression library + * header file (zlib.h) for an explanation of the compression functions. + */ + +/* Set the filtering method(s) used by libpng. Currently, the only valid + * value for "method" is 0. + */ +PNG_EXPORT(67, void, png_set_filter, (png_structrp png_ptr, int method, + int filters)); +#endif /* WRITE */ + +/* Flags for png_set_filter() to say which filters to use. The flags + * are chosen so that they don't conflict with real filter types + * below, in case they are supplied instead of the #defined constants. + * These values should NOT be changed. + */ +#define PNG_NO_FILTERS 0x00 +#define PNG_FILTER_NONE 0x08 +#define PNG_FILTER_SUB 0x10 +#define PNG_FILTER_UP 0x20 +#define PNG_FILTER_AVG 0x40 +#define PNG_FILTER_PAETH 0x80 +#define PNG_FAST_FILTERS (PNG_FILTER_NONE | PNG_FILTER_SUB | PNG_FILTER_UP) +#define PNG_ALL_FILTERS (PNG_FAST_FILTERS | PNG_FILTER_AVG | PNG_FILTER_PAETH) + +/* Filter values (not flags) - used in pngwrite.c, pngwutil.c for now. + * These defines should NOT be changed. + */ +#define PNG_FILTER_VALUE_NONE 0 +#define PNG_FILTER_VALUE_SUB 1 +#define PNG_FILTER_VALUE_UP 2 +#define PNG_FILTER_VALUE_AVG 3 +#define PNG_FILTER_VALUE_PAETH 4 +#define PNG_FILTER_VALUE_LAST 5 + +#ifdef PNG_WRITE_SUPPORTED +#ifdef PNG_WRITE_WEIGHTED_FILTER_SUPPORTED /* DEPRECATED */ +PNG_FP_EXPORT(68, void, png_set_filter_heuristics, (png_structrp png_ptr, + int heuristic_method, int num_weights, png_const_doublep filter_weights, + png_const_doublep filter_costs)) +PNG_FIXED_EXPORT(209, void, png_set_filter_heuristics_fixed, + (png_structrp png_ptr, int heuristic_method, int num_weights, + png_const_fixed_point_p filter_weights, + png_const_fixed_point_p filter_costs)) +#endif /* WRITE_WEIGHTED_FILTER */ + +/* The following are no longer used and will be removed from libpng-1.7: */ +#define PNG_FILTER_HEURISTIC_DEFAULT 0 /* Currently "UNWEIGHTED" */ +#define PNG_FILTER_HEURISTIC_UNWEIGHTED 1 /* Used by libpng < 0.95 */ +#define PNG_FILTER_HEURISTIC_WEIGHTED 2 /* Experimental feature */ +#define PNG_FILTER_HEURISTIC_LAST 3 /* Not a valid value */ + +/* Set the library compression level. Currently, valid values range from + * 0 - 9, corresponding directly to the zlib compression levels 0 - 9 + * (0 - no compression, 9 - "maximal" compression). Note that tests have + * shown that zlib compression levels 3-6 usually perform as well as level 9 + * for PNG images, and do considerably fewer calculations. In the future, + * these values may not correspond directly to the zlib compression levels. + */ +#ifdef PNG_WRITE_CUSTOMIZE_COMPRESSION_SUPPORTED +PNG_EXPORT(69, void, png_set_compression_level, (png_structrp png_ptr, + int level)); + +PNG_EXPORT(70, void, png_set_compression_mem_level, (png_structrp png_ptr, + int mem_level)); + +PNG_EXPORT(71, void, png_set_compression_strategy, (png_structrp png_ptr, + int strategy)); + +/* If PNG_WRITE_OPTIMIZE_CMF_SUPPORTED is defined, libpng will use a + * smaller value of window_bits if it can do so safely. + */ +PNG_EXPORT(72, void, png_set_compression_window_bits, (png_structrp png_ptr, + int window_bits)); + +PNG_EXPORT(73, void, png_set_compression_method, (png_structrp png_ptr, + int method)); +#endif /* WRITE_CUSTOMIZE_COMPRESSION */ + +#ifdef PNG_WRITE_CUSTOMIZE_ZTXT_COMPRESSION_SUPPORTED +/* Also set zlib parameters for compressing non-IDAT chunks */ +PNG_EXPORT(222, void, png_set_text_compression_level, (png_structrp png_ptr, + int level)); + +PNG_EXPORT(223, void, png_set_text_compression_mem_level, (png_structrp png_ptr, + int mem_level)); + +PNG_EXPORT(224, void, png_set_text_compression_strategy, (png_structrp png_ptr, + int strategy)); + +/* If PNG_WRITE_OPTIMIZE_CMF_SUPPORTED is defined, libpng will use a + * smaller value of window_bits if it can do so safely. + */ +PNG_EXPORT(225, void, png_set_text_compression_window_bits, + (png_structrp png_ptr, int window_bits)); + +PNG_EXPORT(226, void, png_set_text_compression_method, (png_structrp png_ptr, + int method)); +#endif /* WRITE_CUSTOMIZE_ZTXT_COMPRESSION */ +#endif /* WRITE */ + +/* These next functions are called for input/output, memory, and error + * handling. They are in the file pngrio.c, pngwio.c, and pngerror.c, + * and call standard C I/O routines such as fread(), fwrite(), and + * fprintf(). These functions can be made to use other I/O routines + * at run time for those applications that need to handle I/O in a + * different manner by calling png_set_???_fn(). See libpng-manual.txt for + * more information. + */ + +#ifdef PNG_STDIO_SUPPORTED +/* Initialize the input/output for the PNG file to the default functions. */ +PNG_EXPORT(74, void, png_init_io, (png_structrp png_ptr, png_FILE_p fp)); +#endif + +/* Replace the (error and abort), and warning functions with user + * supplied functions. If no messages are to be printed you must still + * write and use replacement functions. The replacement error_fn should + * still do a longjmp to the last setjmp location if you are using this + * method of error handling. If error_fn or warning_fn is NULL, the + * default function will be used. + */ + +PNG_EXPORT(75, void, png_set_error_fn, (png_structrp png_ptr, + png_voidp error_ptr, png_error_ptr error_fn, png_error_ptr warning_fn)); + +/* Return the user pointer associated with the error functions */ +PNG_EXPORT(76, png_voidp, png_get_error_ptr, (png_const_structrp png_ptr)); + +/* Replace the default data output functions with a user supplied one(s). + * If buffered output is not used, then output_flush_fn can be set to NULL. + * If PNG_WRITE_FLUSH_SUPPORTED is not defined at libpng compile time + * output_flush_fn will be ignored (and thus can be NULL). + * It is probably a mistake to use NULL for output_flush_fn if + * write_data_fn is not also NULL unless you have built libpng with + * PNG_WRITE_FLUSH_SUPPORTED undefined, because in this case libpng's + * default flush function, which uses the standard *FILE structure, will + * be used. + */ +PNG_EXPORT(77, void, png_set_write_fn, (png_structrp png_ptr, png_voidp io_ptr, + png_rw_ptr write_data_fn, png_flush_ptr output_flush_fn)); + +/* Replace the default data input function with a user supplied one. */ +PNG_EXPORT(78, void, png_set_read_fn, (png_structrp png_ptr, png_voidp io_ptr, + png_rw_ptr read_data_fn)); + +/* Return the user pointer associated with the I/O functions */ +PNG_EXPORT(79, png_voidp, png_get_io_ptr, (png_const_structrp png_ptr)); + +PNG_EXPORT(80, void, png_set_read_status_fn, (png_structrp png_ptr, + png_read_status_ptr read_row_fn)); + +PNG_EXPORT(81, void, png_set_write_status_fn, (png_structrp png_ptr, + png_write_status_ptr write_row_fn)); + +#ifdef PNG_USER_MEM_SUPPORTED +/* Replace the default memory allocation functions with user supplied one(s). */ +PNG_EXPORT(82, void, png_set_mem_fn, (png_structrp png_ptr, png_voidp mem_ptr, + png_malloc_ptr malloc_fn, png_free_ptr free_fn)); +/* Return the user pointer associated with the memory functions */ +PNG_EXPORT(83, png_voidp, png_get_mem_ptr, (png_const_structrp png_ptr)); +#endif + +#ifdef PNG_READ_USER_TRANSFORM_SUPPORTED +PNG_EXPORT(84, void, png_set_read_user_transform_fn, (png_structrp png_ptr, + png_user_transform_ptr read_user_transform_fn)); +#endif + +#ifdef PNG_WRITE_USER_TRANSFORM_SUPPORTED +PNG_EXPORT(85, void, png_set_write_user_transform_fn, (png_structrp png_ptr, + png_user_transform_ptr write_user_transform_fn)); +#endif + +#ifdef PNG_USER_TRANSFORM_PTR_SUPPORTED +PNG_EXPORT(86, void, png_set_user_transform_info, (png_structrp png_ptr, + png_voidp user_transform_ptr, int user_transform_depth, + int user_transform_channels)); +/* Return the user pointer associated with the user transform functions */ +PNG_EXPORT(87, png_voidp, png_get_user_transform_ptr, + (png_const_structrp png_ptr)); +#endif + +#ifdef PNG_USER_TRANSFORM_INFO_SUPPORTED +/* Return information about the row currently being processed. Note that these + * APIs do not fail but will return unexpected results if called outside a user + * transform callback. Also note that when transforming an interlaced image the + * row number is the row number within the sub-image of the interlace pass, so + * the value will increase to the height of the sub-image (not the full image) + * then reset to 0 for the next pass. + * + * Use PNG_ROW_FROM_PASS_ROW(row, pass) and PNG_COL_FROM_PASS_COL(col, pass) to + * find the output pixel (x,y) given an interlaced sub-image pixel + * (row,col,pass). (See below for these macros.) + */ +PNG_EXPORT(217, png_uint_32, png_get_current_row_number, (png_const_structrp)); +PNG_EXPORT(218, png_byte, png_get_current_pass_number, (png_const_structrp)); +#endif + +#ifdef PNG_READ_USER_CHUNKS_SUPPORTED +/* This callback is called only for *unknown* chunks. If + * PNG_HANDLE_AS_UNKNOWN_SUPPORTED is set then it is possible to set known + * chunks to be treated as unknown, however in this case the callback must do + * any processing required by the chunk (e.g. by calling the appropriate + * png_set_ APIs.) + * + * There is no write support - on write, by default, all the chunks in the + * 'unknown' list are written in the specified position. + * + * The integer return from the callback function is interpreted thus: + * + * negative: An error occurred; png_chunk_error will be called. + * zero: The chunk was not handled, the chunk will be saved. A critical + * chunk will cause an error at this point unless it is to be saved. + * positive: The chunk was handled, libpng will ignore/discard it. + * + * See "INTERACTION WITH USER CHUNK CALLBACKS" below for important notes about + * how this behavior will change in libpng 1.7 + */ +PNG_EXPORT(88, void, png_set_read_user_chunk_fn, (png_structrp png_ptr, + png_voidp user_chunk_ptr, png_user_chunk_ptr read_user_chunk_fn)); +#endif + +#ifdef PNG_USER_CHUNKS_SUPPORTED +PNG_EXPORT(89, png_voidp, png_get_user_chunk_ptr, (png_const_structrp png_ptr)); +#endif + +#ifdef PNG_PROGRESSIVE_READ_SUPPORTED +/* Sets the function callbacks for the push reader, and a pointer to a + * user-defined structure available to the callback functions. + */ +PNG_EXPORT(90, void, png_set_progressive_read_fn, (png_structrp png_ptr, + png_voidp progressive_ptr, png_progressive_info_ptr info_fn, + png_progressive_row_ptr row_fn, png_progressive_end_ptr end_fn)); + +/* Returns the user pointer associated with the push read functions */ +PNG_EXPORT(91, png_voidp, png_get_progressive_ptr, + (png_const_structrp png_ptr)); + +/* Function to be called when data becomes available */ +PNG_EXPORT(92, void, png_process_data, (png_structrp png_ptr, + png_inforp info_ptr, png_bytep buffer, size_t buffer_size)); + +/* A function which may be called *only* within png_process_data to stop the + * processing of any more data. The function returns the number of bytes + * remaining, excluding any that libpng has cached internally. A subsequent + * call to png_process_data must supply these bytes again. If the argument + * 'save' is set to true the routine will first save all the pending data and + * will always return 0. + */ +PNG_EXPORT(219, size_t, png_process_data_pause, (png_structrp, int save)); + +/* A function which may be called *only* outside (after) a call to + * png_process_data. It returns the number of bytes of data to skip in the + * input. Normally it will return 0, but if it returns a non-zero value the + * application must skip than number of bytes of input data and pass the + * following data to the next call to png_process_data. + */ +PNG_EXPORT(220, png_uint_32, png_process_data_skip, (png_structrp)); + +/* Function that combines rows. 'new_row' is a flag that should come from + * the callback and be non-NULL if anything needs to be done; the library + * stores its own version of the new data internally and ignores the passed + * in value. + */ +PNG_EXPORT(93, void, png_progressive_combine_row, (png_const_structrp png_ptr, + png_bytep old_row, png_const_bytep new_row)); +#endif /* PROGRESSIVE_READ */ + +PNG_EXPORTA(94, png_voidp, png_malloc, (png_const_structrp png_ptr, + png_alloc_size_t size), PNG_ALLOCATED); +/* Added at libpng version 1.4.0 */ +PNG_EXPORTA(95, png_voidp, png_calloc, (png_const_structrp png_ptr, + png_alloc_size_t size), PNG_ALLOCATED); + +/* Added at libpng version 1.2.4 */ +PNG_EXPORTA(96, png_voidp, png_malloc_warn, (png_const_structrp png_ptr, + png_alloc_size_t size), PNG_ALLOCATED); + +/* Frees a pointer allocated by png_malloc() */ +PNG_EXPORT(97, void, png_free, (png_const_structrp png_ptr, png_voidp ptr)); + +/* Free data that was allocated internally */ +PNG_EXPORT(98, void, png_free_data, (png_const_structrp png_ptr, + png_inforp info_ptr, png_uint_32 free_me, int num)); + +/* Reassign the responsibility for freeing existing data, whether allocated + * by libpng or by the application; this works on the png_info structure passed + * in, without changing the state for other png_info structures. + */ +PNG_EXPORT(99, void, png_data_freer, (png_const_structrp png_ptr, + png_inforp info_ptr, int freer, png_uint_32 mask)); + +/* Assignments for png_data_freer */ +#define PNG_DESTROY_WILL_FREE_DATA 1 +#define PNG_SET_WILL_FREE_DATA 1 +#define PNG_USER_WILL_FREE_DATA 2 +/* Flags for png_ptr->free_me and info_ptr->free_me */ +#define PNG_FREE_HIST 0x0008U +#define PNG_FREE_ICCP 0x0010U +#define PNG_FREE_SPLT 0x0020U +#define PNG_FREE_ROWS 0x0040U +#define PNG_FREE_PCAL 0x0080U +#define PNG_FREE_SCAL 0x0100U +#ifdef PNG_STORE_UNKNOWN_CHUNKS_SUPPORTED +# define PNG_FREE_UNKN 0x0200U +#endif +/* PNG_FREE_LIST 0x0400U removed in 1.6.0 because it is ignored */ +#define PNG_FREE_PLTE 0x1000U +#define PNG_FREE_TRNS 0x2000U +#define PNG_FREE_TEXT 0x4000U +#define PNG_FREE_EXIF 0x8000U /* Added at libpng-1.6.31 */ +#define PNG_FREE_ALL 0xffffU +#define PNG_FREE_MUL 0x4220U /* PNG_FREE_SPLT|PNG_FREE_TEXT|PNG_FREE_UNKN */ + +#ifdef PNG_USER_MEM_SUPPORTED +PNG_EXPORTA(100, png_voidp, png_malloc_default, (png_const_structrp png_ptr, + png_alloc_size_t size), PNG_ALLOCATED PNG_DEPRECATED); +PNG_EXPORTA(101, void, png_free_default, (png_const_structrp png_ptr, + png_voidp ptr), PNG_DEPRECATED); +#endif + +#ifdef PNG_ERROR_TEXT_SUPPORTED +/* Fatal error in PNG image of libpng - can't continue */ +PNG_EXPORTA(102, void, png_error, (png_const_structrp png_ptr, + png_const_charp error_message), PNG_NORETURN); + +/* The same, but the chunk name is prepended to the error string. */ +PNG_EXPORTA(103, void, png_chunk_error, (png_const_structrp png_ptr, + png_const_charp error_message), PNG_NORETURN); + +#else +/* Fatal error in PNG image of libpng - can't continue */ +PNG_EXPORTA(104, void, png_err, (png_const_structrp png_ptr), PNG_NORETURN); +# define png_error(s1,s2) png_err(s1) +# define png_chunk_error(s1,s2) png_err(s1) +#endif + +#ifdef PNG_WARNINGS_SUPPORTED +/* Non-fatal error in libpng. Can continue, but may have a problem. */ +PNG_EXPORT(105, void, png_warning, (png_const_structrp png_ptr, + png_const_charp warning_message)); + +/* Non-fatal error in libpng, chunk name is prepended to message. */ +PNG_EXPORT(106, void, png_chunk_warning, (png_const_structrp png_ptr, + png_const_charp warning_message)); +#else +# define png_warning(s1,s2) ((void)(s1)) +# define png_chunk_warning(s1,s2) ((void)(s1)) +#endif + +#ifdef PNG_BENIGN_ERRORS_SUPPORTED +/* Benign error in libpng. Can continue, but may have a problem. + * User can choose whether to handle as a fatal error or as a warning. */ +PNG_EXPORT(107, void, png_benign_error, (png_const_structrp png_ptr, + png_const_charp warning_message)); + +#ifdef PNG_READ_SUPPORTED +/* Same, chunk name is prepended to message (only during read) */ +PNG_EXPORT(108, void, png_chunk_benign_error, (png_const_structrp png_ptr, + png_const_charp warning_message)); +#endif + +PNG_EXPORT(109, void, png_set_benign_errors, + (png_structrp png_ptr, int allowed)); +#else +# ifdef PNG_ALLOW_BENIGN_ERRORS +# define png_benign_error png_warning +# define png_chunk_benign_error png_chunk_warning +# else +# define png_benign_error png_error +# define png_chunk_benign_error png_chunk_error +# endif +#endif + +/* The png_set_ functions are for storing values in the png_info_struct. + * Similarly, the png_get_ calls are used to read values from the + * png_info_struct, either storing the parameters in the passed variables, or + * setting pointers into the png_info_struct where the data is stored. The + * png_get_ functions return a non-zero value if the data was available + * in info_ptr, or return zero and do not change any of the parameters if the + * data was not available. + * + * These functions should be used instead of directly accessing png_info + * to avoid problems with future changes in the size and internal layout of + * png_info_struct. + */ +/* Returns "flag" if chunk data is valid in info_ptr. */ +PNG_EXPORT(110, png_uint_32, png_get_valid, (png_const_structrp png_ptr, + png_const_inforp info_ptr, png_uint_32 flag)); + +/* Returns number of bytes needed to hold a transformed row. */ +PNG_EXPORT(111, size_t, png_get_rowbytes, (png_const_structrp png_ptr, + png_const_inforp info_ptr)); + +#ifdef PNG_INFO_IMAGE_SUPPORTED +/* Returns row_pointers, which is an array of pointers to scanlines that was + * returned from png_read_png(). + */ +PNG_EXPORT(112, png_bytepp, png_get_rows, (png_const_structrp png_ptr, + png_const_inforp info_ptr)); + +/* Set row_pointers, which is an array of pointers to scanlines for use + * by png_write_png(). + */ +PNG_EXPORT(113, void, png_set_rows, (png_const_structrp png_ptr, + png_inforp info_ptr, png_bytepp row_pointers)); +#endif + +/* Returns number of color channels in image. */ +PNG_EXPORT(114, png_byte, png_get_channels, (png_const_structrp png_ptr, + png_const_inforp info_ptr)); + +#ifdef PNG_EASY_ACCESS_SUPPORTED +/* Returns image width in pixels. */ +PNG_EXPORT(115, png_uint_32, png_get_image_width, (png_const_structrp png_ptr, + png_const_inforp info_ptr)); + +/* Returns image height in pixels. */ +PNG_EXPORT(116, png_uint_32, png_get_image_height, (png_const_structrp png_ptr, + png_const_inforp info_ptr)); + +/* Returns image bit_depth. */ +PNG_EXPORT(117, png_byte, png_get_bit_depth, (png_const_structrp png_ptr, + png_const_inforp info_ptr)); + +/* Returns image color_type. */ +PNG_EXPORT(118, png_byte, png_get_color_type, (png_const_structrp png_ptr, + png_const_inforp info_ptr)); + +/* Returns image filter_type. */ +PNG_EXPORT(119, png_byte, png_get_filter_type, (png_const_structrp png_ptr, + png_const_inforp info_ptr)); + +/* Returns image interlace_type. */ +PNG_EXPORT(120, png_byte, png_get_interlace_type, (png_const_structrp png_ptr, + png_const_inforp info_ptr)); + +/* Returns image compression_type. */ +PNG_EXPORT(121, png_byte, png_get_compression_type, (png_const_structrp png_ptr, + png_const_inforp info_ptr)); + +/* Returns image resolution in pixels per meter, from pHYs chunk data. */ +PNG_EXPORT(122, png_uint_32, png_get_pixels_per_meter, + (png_const_structrp png_ptr, png_const_inforp info_ptr)); +PNG_EXPORT(123, png_uint_32, png_get_x_pixels_per_meter, + (png_const_structrp png_ptr, png_const_inforp info_ptr)); +PNG_EXPORT(124, png_uint_32, png_get_y_pixels_per_meter, + (png_const_structrp png_ptr, png_const_inforp info_ptr)); + +/* Returns pixel aspect ratio, computed from pHYs chunk data. */ +PNG_FP_EXPORT(125, float, png_get_pixel_aspect_ratio, + (png_const_structrp png_ptr, png_const_inforp info_ptr)) +PNG_FIXED_EXPORT(210, png_fixed_point, png_get_pixel_aspect_ratio_fixed, + (png_const_structrp png_ptr, png_const_inforp info_ptr)) + +/* Returns image x, y offset in pixels or microns, from oFFs chunk data. */ +PNG_EXPORT(126, png_int_32, png_get_x_offset_pixels, + (png_const_structrp png_ptr, png_const_inforp info_ptr)); +PNG_EXPORT(127, png_int_32, png_get_y_offset_pixels, + (png_const_structrp png_ptr, png_const_inforp info_ptr)); +PNG_EXPORT(128, png_int_32, png_get_x_offset_microns, + (png_const_structrp png_ptr, png_const_inforp info_ptr)); +PNG_EXPORT(129, png_int_32, png_get_y_offset_microns, + (png_const_structrp png_ptr, png_const_inforp info_ptr)); + +#endif /* EASY_ACCESS */ + +#ifdef PNG_READ_SUPPORTED +/* Returns pointer to signature string read from PNG header */ +PNG_EXPORT(130, png_const_bytep, png_get_signature, (png_const_structrp png_ptr, + png_const_inforp info_ptr)); +#endif + +#ifdef PNG_bKGD_SUPPORTED +PNG_EXPORT(131, png_uint_32, png_get_bKGD, (png_const_structrp png_ptr, + png_inforp info_ptr, png_color_16p *background)); +#endif + +#ifdef PNG_bKGD_SUPPORTED +PNG_EXPORT(132, void, png_set_bKGD, (png_const_structrp png_ptr, + png_inforp info_ptr, png_const_color_16p background)); +#endif + +#ifdef PNG_cHRM_SUPPORTED +PNG_FP_EXPORT(133, png_uint_32, png_get_cHRM, (png_const_structrp png_ptr, + png_const_inforp info_ptr, double *white_x, double *white_y, double *red_x, + double *red_y, double *green_x, double *green_y, double *blue_x, + double *blue_y)) +PNG_FP_EXPORT(230, png_uint_32, png_get_cHRM_XYZ, (png_const_structrp png_ptr, + png_const_inforp info_ptr, double *red_X, double *red_Y, double *red_Z, + double *green_X, double *green_Y, double *green_Z, double *blue_X, + double *blue_Y, double *blue_Z)) +PNG_FIXED_EXPORT(134, png_uint_32, png_get_cHRM_fixed, + (png_const_structrp png_ptr, png_const_inforp info_ptr, + png_fixed_point *int_white_x, png_fixed_point *int_white_y, + png_fixed_point *int_red_x, png_fixed_point *int_red_y, + png_fixed_point *int_green_x, png_fixed_point *int_green_y, + png_fixed_point *int_blue_x, png_fixed_point *int_blue_y)) +PNG_FIXED_EXPORT(231, png_uint_32, png_get_cHRM_XYZ_fixed, + (png_const_structrp png_ptr, png_const_inforp info_ptr, + png_fixed_point *int_red_X, png_fixed_point *int_red_Y, + png_fixed_point *int_red_Z, png_fixed_point *int_green_X, + png_fixed_point *int_green_Y, png_fixed_point *int_green_Z, + png_fixed_point *int_blue_X, png_fixed_point *int_blue_Y, + png_fixed_point *int_blue_Z)) +#endif + +#ifdef PNG_cHRM_SUPPORTED +PNG_FP_EXPORT(135, void, png_set_cHRM, (png_const_structrp png_ptr, + png_inforp info_ptr, + double white_x, double white_y, double red_x, double red_y, double green_x, + double green_y, double blue_x, double blue_y)) +PNG_FP_EXPORT(232, void, png_set_cHRM_XYZ, (png_const_structrp png_ptr, + png_inforp info_ptr, double red_X, double red_Y, double red_Z, + double green_X, double green_Y, double green_Z, double blue_X, + double blue_Y, double blue_Z)) +PNG_FIXED_EXPORT(136, void, png_set_cHRM_fixed, (png_const_structrp png_ptr, + png_inforp info_ptr, png_fixed_point int_white_x, + png_fixed_point int_white_y, png_fixed_point int_red_x, + png_fixed_point int_red_y, png_fixed_point int_green_x, + png_fixed_point int_green_y, png_fixed_point int_blue_x, + png_fixed_point int_blue_y)) +PNG_FIXED_EXPORT(233, void, png_set_cHRM_XYZ_fixed, (png_const_structrp png_ptr, + png_inforp info_ptr, png_fixed_point int_red_X, png_fixed_point int_red_Y, + png_fixed_point int_red_Z, png_fixed_point int_green_X, + png_fixed_point int_green_Y, png_fixed_point int_green_Z, + png_fixed_point int_blue_X, png_fixed_point int_blue_Y, + png_fixed_point int_blue_Z)) +#endif + +#ifdef PNG_cICP_SUPPORTED +PNG_EXPORT(250, png_uint_32, png_get_cICP, (png_const_structrp png_ptr, + png_const_inforp info_ptr, png_bytep colour_primaries, + png_bytep transfer_function, png_bytep matrix_coefficients, + png_bytep video_full_range_flag)); +#endif + +#ifdef PNG_cICP_SUPPORTED +PNG_EXPORT(251, void, png_set_cICP, (png_const_structrp png_ptr, + png_inforp info_ptr, png_byte colour_primaries, + png_byte transfer_function, png_byte matrix_coefficients, + png_byte video_full_range_flag)); +#endif + +#ifdef PNG_cLLI_SUPPORTED +PNG_FP_EXPORT(252, png_uint_32, png_get_cLLI, (png_const_structrp png_ptr, + png_const_inforp info_ptr, double *maximum_content_light_level, + double *maximum_frame_average_light_level)) +PNG_FIXED_EXPORT(253, png_uint_32, png_get_cLLI_fixed, + (png_const_structrp png_ptr, png_const_inforp info_ptr, + /* The values below are in cd/m2 (nits) and are scaled by 10,000; not + * 100,000 as in the case of png_fixed_point. + */ + png_uint_32p maximum_content_light_level_scaled_by_10000, + png_uint_32p maximum_frame_average_light_level_scaled_by_10000)) +#endif + +#ifdef PNG_cLLI_SUPPORTED +PNG_FP_EXPORT(254, void, png_set_cLLI, (png_const_structrp png_ptr, + png_inforp info_ptr, double maximum_content_light_level, + double maximum_frame_average_light_level)) +PNG_FIXED_EXPORT(255, void, png_set_cLLI_fixed, (png_const_structrp png_ptr, + png_inforp info_ptr, + /* The values below are in cd/m2 (nits) and are scaled by 10,000; not + * 100,000 as in the case of png_fixed_point. + */ + png_uint_32 maximum_content_light_level_scaled_by_10000, + png_uint_32 maximum_frame_average_light_level_scaled_by_10000)) +#endif + +#ifdef PNG_eXIf_SUPPORTED +PNG_EXPORT(246, png_uint_32, png_get_eXIf, (png_const_structrp png_ptr, + png_inforp info_ptr, png_bytep *exif)); +PNG_EXPORT(247, void, png_set_eXIf, (png_const_structrp png_ptr, + png_inforp info_ptr, png_bytep exif)); + +PNG_EXPORT(248, png_uint_32, png_get_eXIf_1, (png_const_structrp png_ptr, + png_const_inforp info_ptr, png_uint_32 *num_exif, png_bytep *exif)); +PNG_EXPORT(249, void, png_set_eXIf_1, (png_const_structrp png_ptr, + png_inforp info_ptr, png_uint_32 num_exif, png_bytep exif)); +#endif + +#ifdef PNG_gAMA_SUPPORTED +PNG_FP_EXPORT(137, png_uint_32, png_get_gAMA, (png_const_structrp png_ptr, + png_const_inforp info_ptr, double *file_gamma)) +PNG_FIXED_EXPORT(138, png_uint_32, png_get_gAMA_fixed, + (png_const_structrp png_ptr, png_const_inforp info_ptr, + png_fixed_point *int_file_gamma)) +#endif + +#ifdef PNG_gAMA_SUPPORTED +PNG_FP_EXPORT(139, void, png_set_gAMA, (png_const_structrp png_ptr, + png_inforp info_ptr, double file_gamma)) +PNG_FIXED_EXPORT(140, void, png_set_gAMA_fixed, (png_const_structrp png_ptr, + png_inforp info_ptr, png_fixed_point int_file_gamma)) +#endif + +#ifdef PNG_hIST_SUPPORTED +PNG_EXPORT(141, png_uint_32, png_get_hIST, (png_const_structrp png_ptr, + png_inforp info_ptr, png_uint_16p *hist)); +PNG_EXPORT(142, void, png_set_hIST, (png_const_structrp png_ptr, + png_inforp info_ptr, png_const_uint_16p hist)); +#endif + +PNG_EXPORT(143, png_uint_32, png_get_IHDR, (png_const_structrp png_ptr, + png_const_inforp info_ptr, png_uint_32 *width, png_uint_32 *height, + int *bit_depth, int *color_type, int *interlace_method, + int *compression_method, int *filter_method)); + +PNG_EXPORT(144, void, png_set_IHDR, (png_const_structrp png_ptr, + png_inforp info_ptr, png_uint_32 width, png_uint_32 height, int bit_depth, + int color_type, int interlace_method, int compression_method, + int filter_method)); + +#ifdef PNG_mDCV_SUPPORTED +PNG_FP_EXPORT(256, png_uint_32, png_get_mDCV, (png_const_structrp png_ptr, + png_const_inforp info_ptr, + /* The chromaticities of the mastering display. As cHRM, but independent of + * the encoding endpoints in cHRM, or cICP, or iCCP. These values will + * always be in the range 0 to 1.3107. + */ + double *white_x, double *white_y, double *red_x, double *red_y, + double *green_x, double *green_y, double *blue_x, double *blue_y, + /* Mastering display luminance in cd/m2 (nits). */ + double *mastering_display_maximum_luminance, + double *mastering_display_minimum_luminance)) + +PNG_FIXED_EXPORT(257, png_uint_32, png_get_mDCV_fixed, + (png_const_structrp png_ptr, png_const_inforp info_ptr, + png_fixed_point *int_white_x, png_fixed_point *int_white_y, + png_fixed_point *int_red_x, png_fixed_point *int_red_y, + png_fixed_point *int_green_x, png_fixed_point *int_green_y, + png_fixed_point *int_blue_x, png_fixed_point *int_blue_y, + /* Mastering display luminance in cd/m2 (nits) multiplied (scaled) by + * 10,000. + */ + png_uint_32p mastering_display_maximum_luminance_scaled_by_10000, + png_uint_32p mastering_display_minimum_luminance_scaled_by_10000)) +#endif + +#ifdef PNG_mDCV_SUPPORTED +PNG_FP_EXPORT(258, void, png_set_mDCV, (png_const_structrp png_ptr, + png_inforp info_ptr, + /* The chromaticities of the mastering display. As cHRM, but independent of + * the encoding endpoints in cHRM, or cICP, or iCCP. + */ + double white_x, double white_y, double red_x, double red_y, double green_x, + double green_y, double blue_x, double blue_y, + /* Mastering display luminance in cd/m2 (nits). */ + double mastering_display_maximum_luminance, + double mastering_display_minimum_luminance)) + +PNG_FIXED_EXPORT(259, void, png_set_mDCV_fixed, (png_const_structrp png_ptr, + png_inforp info_ptr, + /* The admissible range of these values is not the full range of a PNG + * fixed point value. Negative values cannot be encoded and the maximum + * value is about 1.3 */ + png_fixed_point int_white_x, png_fixed_point int_white_y, + png_fixed_point int_red_x, png_fixed_point int_red_y, + png_fixed_point int_green_x, png_fixed_point int_green_y, + png_fixed_point int_blue_x, png_fixed_point int_blue_y, + /* These are PNG unsigned 4 byte values: 31-bit unsigned values. The MSB + * must be zero. + */ + png_uint_32 mastering_display_maximum_luminance_scaled_by_10000, + png_uint_32 mastering_display_minimum_luminance_scaled_by_10000)) +#endif + +#ifdef PNG_oFFs_SUPPORTED +PNG_EXPORT(145, png_uint_32, png_get_oFFs, (png_const_structrp png_ptr, + png_const_inforp info_ptr, png_int_32 *offset_x, png_int_32 *offset_y, + int *unit_type)); +#endif + +#ifdef PNG_oFFs_SUPPORTED +PNG_EXPORT(146, void, png_set_oFFs, (png_const_structrp png_ptr, + png_inforp info_ptr, png_int_32 offset_x, png_int_32 offset_y, + int unit_type)); +#endif + +#ifdef PNG_pCAL_SUPPORTED +PNG_EXPORT(147, png_uint_32, png_get_pCAL, (png_const_structrp png_ptr, + png_inforp info_ptr, png_charp *purpose, png_int_32 *X0, + png_int_32 *X1, int *type, int *nparams, png_charp *units, + png_charpp *params)); +#endif + +#ifdef PNG_pCAL_SUPPORTED +PNG_EXPORT(148, void, png_set_pCAL, (png_const_structrp png_ptr, + png_inforp info_ptr, png_const_charp purpose, png_int_32 X0, png_int_32 X1, + int type, int nparams, png_const_charp units, png_charpp params)); +#endif + +#ifdef PNG_pHYs_SUPPORTED +PNG_EXPORT(149, png_uint_32, png_get_pHYs, (png_const_structrp png_ptr, + png_const_inforp info_ptr, png_uint_32 *res_x, png_uint_32 *res_y, + int *unit_type)); +#endif + +#ifdef PNG_pHYs_SUPPORTED +PNG_EXPORT(150, void, png_set_pHYs, (png_const_structrp png_ptr, + png_inforp info_ptr, png_uint_32 res_x, png_uint_32 res_y, int unit_type)); +#endif + +PNG_EXPORT(151, png_uint_32, png_get_PLTE, (png_const_structrp png_ptr, + png_inforp info_ptr, png_colorp *palette, int *num_palette)); + +PNG_EXPORT(152, void, png_set_PLTE, (png_structrp png_ptr, + png_inforp info_ptr, png_const_colorp palette, int num_palette)); + +#ifdef PNG_sBIT_SUPPORTED +PNG_EXPORT(153, png_uint_32, png_get_sBIT, (png_const_structrp png_ptr, + png_inforp info_ptr, png_color_8p *sig_bit)); +#endif + +#ifdef PNG_sBIT_SUPPORTED +PNG_EXPORT(154, void, png_set_sBIT, (png_const_structrp png_ptr, + png_inforp info_ptr, png_const_color_8p sig_bit)); +#endif + +#ifdef PNG_sRGB_SUPPORTED +PNG_EXPORT(155, png_uint_32, png_get_sRGB, (png_const_structrp png_ptr, + png_const_inforp info_ptr, int *file_srgb_intent)); +#endif + +#ifdef PNG_sRGB_SUPPORTED +PNG_EXPORT(156, void, png_set_sRGB, (png_const_structrp png_ptr, + png_inforp info_ptr, int srgb_intent)); +PNG_EXPORT(157, void, png_set_sRGB_gAMA_and_cHRM, (png_const_structrp png_ptr, + png_inforp info_ptr, int srgb_intent)); +#endif + +#ifdef PNG_iCCP_SUPPORTED +PNG_EXPORT(158, png_uint_32, png_get_iCCP, (png_const_structrp png_ptr, + png_inforp info_ptr, png_charpp name, int *compression_type, + png_bytepp profile, png_uint_32 *proflen)); +#endif + +#ifdef PNG_iCCP_SUPPORTED +PNG_EXPORT(159, void, png_set_iCCP, (png_const_structrp png_ptr, + png_inforp info_ptr, png_const_charp name, int compression_type, + png_const_bytep profile, png_uint_32 proflen)); +#endif + +#ifdef PNG_sPLT_SUPPORTED +PNG_EXPORT(160, int, png_get_sPLT, (png_const_structrp png_ptr, + png_inforp info_ptr, png_sPLT_tpp entries)); +#endif + +#ifdef PNG_sPLT_SUPPORTED +PNG_EXPORT(161, void, png_set_sPLT, (png_const_structrp png_ptr, + png_inforp info_ptr, png_const_sPLT_tp entries, int nentries)); +#endif + +#ifdef PNG_TEXT_SUPPORTED +/* png_get_text also returns the number of text chunks in *num_text */ +PNG_EXPORT(162, int, png_get_text, (png_const_structrp png_ptr, + png_inforp info_ptr, png_textp *text_ptr, int *num_text)); +#endif + +/* Note while png_set_text() will accept a structure whose text, + * language, and translated keywords are NULL pointers, the structure + * returned by png_get_text will always contain regular + * zero-terminated C strings. They might be empty strings but + * they will never be NULL pointers. + */ + +#ifdef PNG_TEXT_SUPPORTED +PNG_EXPORT(163, void, png_set_text, (png_const_structrp png_ptr, + png_inforp info_ptr, png_const_textp text_ptr, int num_text)); +#endif + +#ifdef PNG_tIME_SUPPORTED +PNG_EXPORT(164, png_uint_32, png_get_tIME, (png_const_structrp png_ptr, + png_inforp info_ptr, png_timep *mod_time)); +#endif + +#ifdef PNG_tIME_SUPPORTED +PNG_EXPORT(165, void, png_set_tIME, (png_const_structrp png_ptr, + png_inforp info_ptr, png_const_timep mod_time)); +#endif + +#ifdef PNG_tRNS_SUPPORTED +PNG_EXPORT(166, png_uint_32, png_get_tRNS, (png_const_structrp png_ptr, + png_inforp info_ptr, png_bytep *trans_alpha, int *num_trans, + png_color_16p *trans_color)); +#endif + +#ifdef PNG_tRNS_SUPPORTED +PNG_EXPORT(167, void, png_set_tRNS, (png_structrp png_ptr, + png_inforp info_ptr, png_const_bytep trans_alpha, int num_trans, + png_const_color_16p trans_color)); +#endif + +#ifdef PNG_sCAL_SUPPORTED +PNG_FP_EXPORT(168, png_uint_32, png_get_sCAL, (png_const_structrp png_ptr, + png_const_inforp info_ptr, int *unit, double *width, double *height)) +#if defined(PNG_FLOATING_ARITHMETIC_SUPPORTED) || \ + defined(PNG_FLOATING_POINT_SUPPORTED) +/* NOTE: this API is currently implemented using floating point arithmetic, + * consequently it can only be used on systems with floating point support. + * In any case the range of values supported by png_fixed_point is small and it + * is highly recommended that png_get_sCAL_s be used instead. + */ +PNG_FIXED_EXPORT(214, png_uint_32, png_get_sCAL_fixed, + (png_const_structrp png_ptr, png_const_inforp info_ptr, int *unit, + png_fixed_point *width, png_fixed_point *height)) +#endif +PNG_EXPORT(169, png_uint_32, png_get_sCAL_s, + (png_const_structrp png_ptr, png_const_inforp info_ptr, int *unit, + png_charpp swidth, png_charpp sheight)); + +PNG_FP_EXPORT(170, void, png_set_sCAL, (png_const_structrp png_ptr, + png_inforp info_ptr, int unit, double width, double height)) +PNG_FIXED_EXPORT(213, void, png_set_sCAL_fixed, (png_const_structrp png_ptr, + png_inforp info_ptr, int unit, png_fixed_point width, + png_fixed_point height)) +PNG_EXPORT(171, void, png_set_sCAL_s, (png_const_structrp png_ptr, + png_inforp info_ptr, int unit, + png_const_charp swidth, png_const_charp sheight)); +#endif /* sCAL */ + +#ifdef PNG_SET_UNKNOWN_CHUNKS_SUPPORTED +/* Provide the default handling for all unknown chunks or, optionally, for + * specific unknown chunks. + * + * NOTE: prior to 1.6.0 the handling specified for particular chunks on read was + * ignored and the default was used, the per-chunk setting only had an effect on + * write. If you wish to have chunk-specific handling on read in code that must + * work on earlier versions you must use a user chunk callback to specify the + * desired handling (keep or discard.) + * + * The 'keep' parameter is a PNG_HANDLE_CHUNK_ value as listed below. The + * parameter is interpreted as follows: + * + * READ: + * PNG_HANDLE_CHUNK_AS_DEFAULT: + * Known chunks: do normal libpng processing, do not keep the chunk (but + * see the comments below about PNG_HANDLE_AS_UNKNOWN_SUPPORTED) + * Unknown chunks: for a specific chunk use the global default, when used + * as the default discard the chunk data. + * PNG_HANDLE_CHUNK_NEVER: + * Discard the chunk data. + * PNG_HANDLE_CHUNK_IF_SAFE: + * Keep the chunk data if the chunk is not critical else raise a chunk + * error. + * PNG_HANDLE_CHUNK_ALWAYS: + * Keep the chunk data. + * + * If the chunk data is saved it can be retrieved using png_get_unknown_chunks, + * below. Notice that specifying "AS_DEFAULT" as a global default is equivalent + * to specifying "NEVER", however when "AS_DEFAULT" is used for specific chunks + * it simply resets the behavior to the libpng default. + * + * INTERACTION WITH USER CHUNK CALLBACKS: + * The per-chunk handling is always used when there is a png_user_chunk_ptr + * callback and the callback returns 0; the chunk is then always stored *unless* + * it is critical and the per-chunk setting is other than ALWAYS. Notice that + * the global default is *not* used in this case. (In effect the per-chunk + * value is incremented to at least IF_SAFE.) + * + * IMPORTANT NOTE: this behavior will change in libpng 1.7 - the global and + * per-chunk defaults will be honored. If you want to preserve the current + * behavior when your callback returns 0 you must set PNG_HANDLE_CHUNK_IF_SAFE + * as the default - if you don't do this libpng 1.6 will issue a warning. + * + * If you want unhandled unknown chunks to be discarded in libpng 1.6 and + * earlier simply return '1' (handled). + * + * PNG_HANDLE_AS_UNKNOWN_SUPPORTED: + * If this is *not* set known chunks will always be handled by libpng and + * will never be stored in the unknown chunk list. Known chunks listed to + * png_set_keep_unknown_chunks will have no effect. If it is set then known + * chunks listed with a keep other than AS_DEFAULT will *never* be processed + * by libpng, in addition critical chunks must either be processed by the + * callback or saved. + * + * The IHDR and IEND chunks must not be listed. Because this turns off the + * default handling for chunks that would otherwise be recognized the + * behavior of libpng transformations may well become incorrect! + * + * WRITE: + * When writing chunks the options only apply to the chunks specified by + * png_set_unknown_chunks (below), libpng will *always* write known chunks + * required by png_set_ calls and will always write the core critical chunks + * (as required for PLTE). + * + * Each chunk in the png_set_unknown_chunks list is looked up in the + * png_set_keep_unknown_chunks list to find the keep setting, this is then + * interpreted as follows: + * + * PNG_HANDLE_CHUNK_AS_DEFAULT: + * Write safe-to-copy chunks and write other chunks if the global + * default is set to _ALWAYS, otherwise don't write this chunk. + * PNG_HANDLE_CHUNK_NEVER: + * Do not write the chunk. + * PNG_HANDLE_CHUNK_IF_SAFE: + * Write the chunk if it is safe-to-copy, otherwise do not write it. + * PNG_HANDLE_CHUNK_ALWAYS: + * Write the chunk. + * + * Note that the default behavior is effectively the opposite of the read case - + * in read unknown chunks are not stored by default, in write they are written + * by default. Also the behavior of PNG_HANDLE_CHUNK_IF_SAFE is very different + * - on write the safe-to-copy bit is checked, on read the critical bit is + * checked and on read if the chunk is critical an error will be raised. + * + * num_chunks: + * =========== + * If num_chunks is positive, then the "keep" parameter specifies the manner + * for handling only those chunks appearing in the chunk_list array, + * otherwise the chunk list array is ignored. + * + * If num_chunks is 0 the "keep" parameter specifies the default behavior for + * unknown chunks, as described above. + * + * If num_chunks is negative, then the "keep" parameter specifies the manner + * for handling all unknown chunks plus all chunks recognized by libpng + * except for the IHDR, PLTE, tRNS, IDAT, and IEND chunks (which continue to + * be processed by libpng. + */ +#ifdef PNG_HANDLE_AS_UNKNOWN_SUPPORTED +PNG_EXPORT(172, void, png_set_keep_unknown_chunks, (png_structrp png_ptr, + int keep, png_const_bytep chunk_list, int num_chunks)); +#endif /* HANDLE_AS_UNKNOWN */ + +/* The "keep" PNG_HANDLE_CHUNK_ parameter for the specified chunk is returned; + * the result is therefore true (non-zero) if special handling is required, + * false for the default handling. + */ +PNG_EXPORT(173, int, png_handle_as_unknown, (png_const_structrp png_ptr, + png_const_bytep chunk_name)); +#endif /* SET_UNKNOWN_CHUNKS */ + +#ifdef PNG_STORE_UNKNOWN_CHUNKS_SUPPORTED +PNG_EXPORT(174, void, png_set_unknown_chunks, (png_const_structrp png_ptr, + png_inforp info_ptr, png_const_unknown_chunkp unknowns, + int num_unknowns)); + /* NOTE: prior to 1.6.0 this routine set the 'location' field of the added + * unknowns to the location currently stored in the png_struct. This is + * invariably the wrong value on write. To fix this call the following API + * for each chunk in the list with the correct location. If you know your + * code won't be compiled on earlier versions you can rely on + * png_set_unknown_chunks(write-ptr, png_get_unknown_chunks(read-ptr)) doing + * the correct thing. + */ + +PNG_EXPORT(175, void, png_set_unknown_chunk_location, + (png_const_structrp png_ptr, png_inforp info_ptr, int chunk, int location)); + +PNG_EXPORT(176, int, png_get_unknown_chunks, (png_const_structrp png_ptr, + png_inforp info_ptr, png_unknown_chunkpp entries)); +#endif + +/* Png_free_data() will turn off the "valid" flag for anything it frees. + * If you need to turn it off for a chunk that your application has freed, + * you can use png_set_invalid(png_ptr, info_ptr, PNG_INFO_CHNK); + */ +PNG_EXPORT(177, void, png_set_invalid, (png_const_structrp png_ptr, + png_inforp info_ptr, int mask)); + +#ifdef PNG_INFO_IMAGE_SUPPORTED +/* The "params" pointer is currently not used and is for future expansion. */ +#ifdef PNG_SEQUENTIAL_READ_SUPPORTED +PNG_EXPORT(178, void, png_read_png, (png_structrp png_ptr, png_inforp info_ptr, + int transforms, png_voidp params)); +#endif +#ifdef PNG_WRITE_SUPPORTED +PNG_EXPORT(179, void, png_write_png, (png_structrp png_ptr, png_inforp info_ptr, + int transforms, png_voidp params)); +#endif +#endif + +PNG_EXPORT(180, png_const_charp, png_get_copyright, + (png_const_structrp png_ptr)); +PNG_EXPORT(181, png_const_charp, png_get_header_ver, + (png_const_structrp png_ptr)); +PNG_EXPORT(182, png_const_charp, png_get_header_version, + (png_const_structrp png_ptr)); +PNG_EXPORT(183, png_const_charp, png_get_libpng_ver, + (png_const_structrp png_ptr)); + +#ifdef PNG_MNG_FEATURES_SUPPORTED +PNG_EXPORT(184, png_uint_32, png_permit_mng_features, (png_structrp png_ptr, + png_uint_32 mng_features_permitted)); +#endif + +/* For use in png_set_keep_unknown, added to version 1.2.6 */ +#define PNG_HANDLE_CHUNK_AS_DEFAULT 0 +#define PNG_HANDLE_CHUNK_NEVER 1 +#define PNG_HANDLE_CHUNK_IF_SAFE 2 +#define PNG_HANDLE_CHUNK_ALWAYS 3 +#define PNG_HANDLE_CHUNK_LAST 4 + +/* Strip the prepended error numbers ("#nnn ") from error and warning + * messages before passing them to the error or warning handler. + */ +#ifdef PNG_ERROR_NUMBERS_SUPPORTED +PNG_EXPORT(185, void, png_set_strip_error_numbers, (png_structrp png_ptr, + png_uint_32 strip_mode)); +#endif + +/* Added in libpng-1.2.6 */ +#ifdef PNG_SET_USER_LIMITS_SUPPORTED +PNG_EXPORT(186, void, png_set_user_limits, (png_structrp png_ptr, + png_uint_32 user_width_max, png_uint_32 user_height_max)); +PNG_EXPORT(187, png_uint_32, png_get_user_width_max, + (png_const_structrp png_ptr)); +PNG_EXPORT(188, png_uint_32, png_get_user_height_max, + (png_const_structrp png_ptr)); +/* Added in libpng-1.4.0 */ +PNG_EXPORT(189, void, png_set_chunk_cache_max, (png_structrp png_ptr, + png_uint_32 user_chunk_cache_max)); +PNG_EXPORT(190, png_uint_32, png_get_chunk_cache_max, + (png_const_structrp png_ptr)); +/* Added in libpng-1.4.1 */ +PNG_EXPORT(191, void, png_set_chunk_malloc_max, (png_structrp png_ptr, + png_alloc_size_t user_chunk_cache_max)); +PNG_EXPORT(192, png_alloc_size_t, png_get_chunk_malloc_max, + (png_const_structrp png_ptr)); +#endif + +#if defined(PNG_INCH_CONVERSIONS_SUPPORTED) +PNG_EXPORT(193, png_uint_32, png_get_pixels_per_inch, + (png_const_structrp png_ptr, png_const_inforp info_ptr)); + +PNG_EXPORT(194, png_uint_32, png_get_x_pixels_per_inch, + (png_const_structrp png_ptr, png_const_inforp info_ptr)); + +PNG_EXPORT(195, png_uint_32, png_get_y_pixels_per_inch, + (png_const_structrp png_ptr, png_const_inforp info_ptr)); + +PNG_FP_EXPORT(196, float, png_get_x_offset_inches, + (png_const_structrp png_ptr, png_const_inforp info_ptr)) +#ifdef PNG_FIXED_POINT_SUPPORTED /* otherwise not implemented. */ +PNG_FIXED_EXPORT(211, png_fixed_point, png_get_x_offset_inches_fixed, + (png_const_structrp png_ptr, png_const_inforp info_ptr)) +#endif + +PNG_FP_EXPORT(197, float, png_get_y_offset_inches, (png_const_structrp png_ptr, + png_const_inforp info_ptr)) +#ifdef PNG_FIXED_POINT_SUPPORTED /* otherwise not implemented. */ +PNG_FIXED_EXPORT(212, png_fixed_point, png_get_y_offset_inches_fixed, + (png_const_structrp png_ptr, png_const_inforp info_ptr)) +#endif + +# ifdef PNG_pHYs_SUPPORTED +PNG_EXPORT(198, png_uint_32, png_get_pHYs_dpi, (png_const_structrp png_ptr, + png_const_inforp info_ptr, png_uint_32 *res_x, png_uint_32 *res_y, + int *unit_type)); +# endif /* pHYs */ +#endif /* INCH_CONVERSIONS */ + +/* Added in libpng-1.4.0 */ +#ifdef PNG_IO_STATE_SUPPORTED +PNG_EXPORT(199, png_uint_32, png_get_io_state, (png_const_structrp png_ptr)); + +/* Removed from libpng 1.6; use png_get_io_chunk_type. */ +PNG_REMOVED(200, png_const_bytep, png_get_io_chunk_name, (png_structrp png_ptr), + PNG_DEPRECATED) + +PNG_EXPORT(216, png_uint_32, png_get_io_chunk_type, + (png_const_structrp png_ptr)); + +/* The flags returned by png_get_io_state() are the following: */ +# define PNG_IO_NONE 0x0000 /* no I/O at this moment */ +# define PNG_IO_READING 0x0001 /* currently reading */ +# define PNG_IO_WRITING 0x0002 /* currently writing */ +# define PNG_IO_SIGNATURE 0x0010 /* currently at the file signature */ +# define PNG_IO_CHUNK_HDR 0x0020 /* currently at the chunk header */ +# define PNG_IO_CHUNK_DATA 0x0040 /* currently at the chunk data */ +# define PNG_IO_CHUNK_CRC 0x0080 /* currently at the chunk crc */ +# define PNG_IO_MASK_OP 0x000f /* current operation: reading/writing */ +# define PNG_IO_MASK_LOC 0x00f0 /* current location: sig/hdr/data/crc */ +#endif /* IO_STATE */ + +/* Interlace support. The following macros are always defined so that if + * libpng interlace handling is turned off the macros may be used to handle + * interlaced images within the application. + */ +#define PNG_INTERLACE_ADAM7_PASSES 7 + +/* Two macros to return the first row and first column of the original, + * full, image which appears in a given pass. 'pass' is in the range 0 + * to 6 and the result is in the range 0 to 7. + */ +#define PNG_PASS_START_ROW(pass) (((1&~(pass))<<(3-((pass)>>1)))&7) +#define PNG_PASS_START_COL(pass) (((1& (pass))<<(3-(((pass)+1)>>1)))&7) + +/* A macro to return the offset between pixels in the output row for a pair of + * pixels in the input - effectively the inverse of the 'COL_SHIFT' macro that + * follows. Note that ROW_OFFSET is the offset from one row to the next whereas + * COL_OFFSET is from one column to the next, within a row. + */ +#define PNG_PASS_ROW_OFFSET(pass) ((pass)>2?(8>>(((pass)-1)>>1)):8) +#define PNG_PASS_COL_OFFSET(pass) (1<<((7-(pass))>>1)) + +/* Two macros to help evaluate the number of rows or columns in each + * pass. This is expressed as a shift - effectively log2 of the number or + * rows or columns in each 8x8 tile of the original image. + */ +#define PNG_PASS_ROW_SHIFT(pass) ((pass)>2?(8-(pass))>>1:3) +#define PNG_PASS_COL_SHIFT(pass) ((pass)>1?(7-(pass))>>1:3) + +/* Hence two macros to determine the number of rows or columns in a given + * pass of an image given its height or width. In fact these macros may + * return non-zero even though the sub-image is empty, because the other + * dimension may be empty for a small image. + */ +#define PNG_PASS_ROWS(height, pass) (((height)+(((1<>PNG_PASS_ROW_SHIFT(pass)) +#define PNG_PASS_COLS(width, pass) (((width)+(((1<>PNG_PASS_COL_SHIFT(pass)) + +/* For the reader row callbacks (both progressive and sequential) it is + * necessary to find the row in the output image given a row in an interlaced + * image, so two more macros: + */ +#define PNG_ROW_FROM_PASS_ROW(y_in, pass) \ + (((y_in)<>(((7-(off))-(pass))<<2)) & 0xF) | \ + ((0x01145AF0>>(((7-(off))-(pass))<<2)) & 0xF0)) + +#define PNG_ROW_IN_INTERLACE_PASS(y, pass) \ + ((PNG_PASS_MASK(pass,0) >> ((y)&7)) & 1) +#define PNG_COL_IN_INTERLACE_PASS(x, pass) \ + ((PNG_PASS_MASK(pass,1) >> ((x)&7)) & 1) + +#ifdef PNG_READ_COMPOSITE_NODIV_SUPPORTED +/* With these routines we avoid an integer divide, which will be slower on + * most machines. However, it does take more operations than the corresponding + * divide method, so it may be slower on a few RISC systems. There are two + * shifts (by 8 or 16 bits) and an addition, versus a single integer divide. + * + * Note that the rounding factors are NOT supposed to be the same! 128 and + * 32768 are correct for the NODIV code; 127 and 32767 are correct for the + * standard method. + * + * [Optimized code by Greg Roelofs and Mark Adler...blame us for bugs. :-) ] + */ + + /* fg and bg should be in `gamma 1.0' space; alpha is the opacity */ + +# define png_composite(composite, fg, alpha, bg) \ + { \ + png_uint_16 temp = (png_uint_16)((png_uint_16)(fg) \ + * (png_uint_16)(alpha) \ + + (png_uint_16)(bg)*(png_uint_16)(255 \ + - (png_uint_16)(alpha)) + 128); \ + (composite) = (png_byte)(((temp + (temp >> 8)) >> 8) & 0xff); \ + } + +# define png_composite_16(composite, fg, alpha, bg) \ + { \ + png_uint_32 temp = (png_uint_32)((png_uint_32)(fg) \ + * (png_uint_32)(alpha) \ + + (png_uint_32)(bg)*(65535 \ + - (png_uint_32)(alpha)) + 32768); \ + (composite) = (png_uint_16)(0xffff & ((temp + (temp >> 16)) >> 16)); \ + } + +#else /* Standard method using integer division */ + +# define png_composite(composite, fg, alpha, bg) \ + (composite) = \ + (png_byte)(0xff & (((png_uint_16)(fg) * (png_uint_16)(alpha) + \ + (png_uint_16)(bg) * (png_uint_16)(255 - (png_uint_16)(alpha)) + \ + 127) / 255)) + +# define png_composite_16(composite, fg, alpha, bg) \ + (composite) = \ + (png_uint_16)(0xffff & (((png_uint_32)(fg) * (png_uint_32)(alpha) + \ + (png_uint_32)(bg)*(png_uint_32)(65535 - (png_uint_32)(alpha)) + \ + 32767) / 65535)) +#endif /* READ_COMPOSITE_NODIV */ + +#ifdef PNG_READ_INT_FUNCTIONS_SUPPORTED +PNG_EXPORT(201, png_uint_32, png_get_uint_32, (png_const_bytep buf)); +PNG_EXPORT(202, png_uint_16, png_get_uint_16, (png_const_bytep buf)); +PNG_EXPORT(203, png_int_32, png_get_int_32, (png_const_bytep buf)); +#endif + +PNG_EXPORT(204, png_uint_32, png_get_uint_31, (png_const_structrp png_ptr, + png_const_bytep buf)); +/* No png_get_int_16 -- may be added if there's a real need for it. */ + +/* Place a 32-bit number into a buffer in PNG byte order (big-endian). */ +#ifdef PNG_WRITE_INT_FUNCTIONS_SUPPORTED +PNG_EXPORT(205, void, png_save_uint_32, (png_bytep buf, png_uint_32 i)); +#endif +#ifdef PNG_SAVE_INT_32_SUPPORTED +PNG_EXPORT(206, void, png_save_int_32, (png_bytep buf, png_int_32 i)); +#endif + +/* Place a 16-bit number into a buffer in PNG byte order. + * The parameter is declared unsigned int, not png_uint_16, + * just to avoid potential problems on pre-ANSI C compilers. + */ +#ifdef PNG_WRITE_INT_FUNCTIONS_SUPPORTED +PNG_EXPORT(207, void, png_save_uint_16, (png_bytep buf, unsigned int i)); +/* No png_save_int_16 -- may be added if there's a real need for it. */ +#endif + +#ifdef PNG_USE_READ_MACROS +/* Inline macros to do direct reads of bytes from the input buffer. + * The png_get_int_32() routine assumes we are using two's complement + * format for negative values, which is almost certainly true. + */ +# define PNG_get_uint_32(buf) \ + (((png_uint_32)(*(buf)) << 24) + \ + ((png_uint_32)(*((buf) + 1)) << 16) + \ + ((png_uint_32)(*((buf) + 2)) << 8) + \ + ((png_uint_32)(*((buf) + 3)))) + + /* From libpng-1.4.0 until 1.4.4, the png_get_uint_16 macro (but not the + * function) incorrectly returned a value of type png_uint_32. + */ +# define PNG_get_uint_16(buf) \ + ((png_uint_16) \ + (((unsigned int)(*(buf)) << 8) + \ + ((unsigned int)(*((buf) + 1))))) + +# define PNG_get_int_32(buf) \ + ((png_int_32)((*(buf) & 0x80) \ + ? -((png_int_32)(((png_get_uint_32(buf)^0xffffffffU)+1U)&0x7fffffffU)) \ + : (png_int_32)png_get_uint_32(buf))) + +/* If PNG_PREFIX is defined the same thing as below happens in pnglibconf.h, + * but defining a macro name prefixed with PNG_PREFIX. + */ +# ifndef PNG_PREFIX +# define png_get_uint_32(buf) PNG_get_uint_32(buf) +# define png_get_uint_16(buf) PNG_get_uint_16(buf) +# define png_get_int_32(buf) PNG_get_int_32(buf) +# endif +#else +# ifdef PNG_PREFIX + /* No macros; revert to the (redefined) function */ +# define PNG_get_uint_32 (png_get_uint_32) +# define PNG_get_uint_16 (png_get_uint_16) +# define PNG_get_int_32 (png_get_int_32) +# endif +#endif + +#ifdef PNG_CHECK_FOR_INVALID_INDEX_SUPPORTED +PNG_EXPORT(242, void, png_set_check_for_invalid_index, + (png_structrp png_ptr, int allowed)); +# ifdef PNG_GET_PALETTE_MAX_SUPPORTED +PNG_EXPORT(243, int, png_get_palette_max, (png_const_structp png_ptr, + png_const_infop info_ptr)); +# endif +#endif /* CHECK_FOR_INVALID_INDEX */ + +/******************************************************************************* + * Section 5: SIMPLIFIED API + ******************************************************************************* + * + * Please read the documentation in libpng-manual.txt (TODO: write said + * documentation) if you don't understand what follows. + * + * The simplified API hides the details of both libpng and the PNG file format + * itself. It allows PNG files to be read into a very limited number of + * in-memory bitmap formats or to be written from the same formats. If these + * formats do not accommodate your needs then you can, and should, use the more + * sophisticated APIs above - these support a wide variety of in-memory formats + * and a wide variety of sophisticated transformations to those formats as well + * as a wide variety of APIs to manipulate ancillary information. + * + * To read a PNG file using the simplified API: + * + * 1) Declare a 'png_image' structure (see below) on the stack, set the + * version field to PNG_IMAGE_VERSION and the 'opaque' pointer to NULL + * (this is REQUIRED, your program may crash if you don't do it.) + * 2) Call the appropriate png_image_begin_read... function. + * 3) Set the png_image 'format' member to the required sample format. + * 4) Allocate a buffer for the image and, if required, the color-map. + * 5) Call png_image_finish_read to read the image and, if required, the + * color-map into your buffers. + * + * There are no restrictions on the format of the PNG input itself; all valid + * color types, bit depths, and interlace methods are acceptable, and the + * input image is transformed as necessary to the requested in-memory format + * during the png_image_finish_read() step. The only caveat is that if you + * request a color-mapped image from a PNG that is full-color or makes + * complex use of an alpha channel the transformation is extremely lossy and the + * result may look terrible. + * + * To write a PNG file using the simplified API: + * + * 1) Declare a 'png_image' structure on the stack and memset() it to all zero. + * 2) Initialize the members of the structure that describe the image, setting + * the 'format' member to the format of the image samples. + * 3) Call the appropriate png_image_write... function with a pointer to the + * image and, if necessary, the color-map to write the PNG data. + * + * png_image is a structure that describes the in-memory format of an image + * when it is being read or defines the in-memory format of an image that you + * need to write: + */ +#if defined(PNG_SIMPLIFIED_READ_SUPPORTED) || \ + defined(PNG_SIMPLIFIED_WRITE_SUPPORTED) + +#define PNG_IMAGE_VERSION 1 + +typedef struct png_control *png_controlp; +typedef struct +{ + png_controlp opaque; /* Initialize to NULL, free with png_image_free */ + png_uint_32 version; /* Set to PNG_IMAGE_VERSION */ + png_uint_32 width; /* Image width in pixels (columns) */ + png_uint_32 height; /* Image height in pixels (rows) */ + png_uint_32 format; /* Image format as defined below */ + png_uint_32 flags; /* A bit mask containing informational flags */ + png_uint_32 colormap_entries; + /* Number of entries in the color-map */ + + /* In the event of an error or warning the following field will be set to a + * non-zero value and the 'message' field will contain a '\0' terminated + * string with the libpng error or warning message. If both warnings and + * an error were encountered, only the error is recorded. If there + * are multiple warnings, only the first one is recorded. + * + * The upper 30 bits of this value are reserved, the low two bits contain + * a value as follows: + */ +# define PNG_IMAGE_WARNING 1 +# define PNG_IMAGE_ERROR 2 + /* + * The result is a two-bit code such that a value more than 1 indicates + * a failure in the API just called: + * + * 0 - no warning or error + * 1 - warning + * 2 - error + * 3 - error preceded by warning + */ +# define PNG_IMAGE_FAILED(png_cntrl) ((((png_cntrl).warning_or_error)&0x03)>1) + + png_uint_32 warning_or_error; + + char message[64]; +} png_image, *png_imagep; + +/* The samples of the image have one to four channels whose components have + * original values in the range 0 to 1.0: + * + * 1: A single gray or luminance channel (G). + * 2: A gray/luminance channel and an alpha channel (GA). + * 3: Three red, green, blue color channels (RGB). + * 4: Three color channels and an alpha channel (RGBA). + * + * The components are encoded in one of two ways: + * + * a) As a small integer, value 0..255, contained in a single byte. For the + * alpha channel the original value is simply value/255. For the color or + * luminance channels the value is encoded according to the sRGB specification + * and matches the 8-bit format expected by typical display devices. + * + * The color/gray channels are not scaled (pre-multiplied) by the alpha + * channel and are suitable for passing to color management software. + * + * b) As a value in the range 0..65535, contained in a 2-byte integer. All + * channels can be converted to the original value by dividing by 65535; all + * channels are linear. Color channels use the RGB encoding (RGB end-points) of + * the sRGB specification. This encoding is identified by the + * PNG_FORMAT_FLAG_LINEAR flag below. + * + * When the simplified API needs to convert between sRGB and linear colorspaces, + * the actual sRGB transfer curve defined in the sRGB specification (see the + * article at ) is used, not the gamma=1/2.2 + * approximation used elsewhere in libpng. + * + * When an alpha channel is present it is expected to denote pixel coverage + * of the color or luminance channels and is returned as an associated alpha + * channel: the color/gray channels are scaled (pre-multiplied) by the alpha + * value. + * + * The samples are either contained directly in the image data, between 1 and 8 + * bytes per pixel according to the encoding, or are held in a color-map indexed + * by bytes in the image data. In the case of a color-map the color-map entries + * are individual samples, encoded as above, and the image data has one byte per + * pixel to select the relevant sample from the color-map. + */ + +/* PNG_FORMAT_* + * + * #defines to be used in png_image::format. Each #define identifies a + * particular layout of sample data and, if present, alpha values. There are + * separate defines for each of the two component encodings. + * + * A format is built up using single bit flag values. All combinations are + * valid. Formats can be built up from the flag values or you can use one of + * the predefined values below. When testing formats always use the FORMAT_FLAG + * macros to test for individual features - future versions of the library may + * add new flags. + * + * When reading or writing color-mapped images the format should be set to the + * format of the entries in the color-map then png_image_{read,write}_colormap + * called to read or write the color-map and set the format correctly for the + * image data. Do not set the PNG_FORMAT_FLAG_COLORMAP bit directly! + * + * NOTE: libpng can be built with particular features disabled. If you see + * compiler errors because the definition of one of the following flags has been + * compiled out it is because libpng does not have the required support. It is + * possible, however, for the libpng configuration to enable the format on just + * read or just write; in that case you may see an error at run time. You can + * guard against this by checking for the definition of the appropriate + * "_SUPPORTED" macro, one of: + * + * PNG_SIMPLIFIED_{READ,WRITE}_{BGR,AFIRST}_SUPPORTED + */ +#define PNG_FORMAT_FLAG_ALPHA 0x01U /* format with an alpha channel */ +#define PNG_FORMAT_FLAG_COLOR 0x02U /* color format: otherwise grayscale */ +#define PNG_FORMAT_FLAG_LINEAR 0x04U /* 2-byte channels else 1-byte */ +#define PNG_FORMAT_FLAG_COLORMAP 0x08U /* image data is color-mapped */ + +#ifdef PNG_FORMAT_BGR_SUPPORTED +# define PNG_FORMAT_FLAG_BGR 0x10U /* BGR colors, else order is RGB */ +#endif + +#ifdef PNG_FORMAT_AFIRST_SUPPORTED +# define PNG_FORMAT_FLAG_AFIRST 0x20U /* alpha channel comes first */ +#endif + +#define PNG_FORMAT_FLAG_ASSOCIATED_ALPHA 0x40U /* alpha channel is associated */ + +/* Commonly used formats have predefined macros. + * + * First the single byte (sRGB) formats: + */ +#define PNG_FORMAT_GRAY 0 +#define PNG_FORMAT_GA PNG_FORMAT_FLAG_ALPHA +#define PNG_FORMAT_AG (PNG_FORMAT_GA|PNG_FORMAT_FLAG_AFIRST) +#define PNG_FORMAT_RGB PNG_FORMAT_FLAG_COLOR +#define PNG_FORMAT_BGR (PNG_FORMAT_FLAG_COLOR|PNG_FORMAT_FLAG_BGR) +#define PNG_FORMAT_RGBA (PNG_FORMAT_RGB|PNG_FORMAT_FLAG_ALPHA) +#define PNG_FORMAT_ARGB (PNG_FORMAT_RGBA|PNG_FORMAT_FLAG_AFIRST) +#define PNG_FORMAT_BGRA (PNG_FORMAT_BGR|PNG_FORMAT_FLAG_ALPHA) +#define PNG_FORMAT_ABGR (PNG_FORMAT_BGRA|PNG_FORMAT_FLAG_AFIRST) + +/* Then the linear 2-byte formats. When naming these "Y" is used to + * indicate a luminance (gray) channel. + */ +#define PNG_FORMAT_LINEAR_Y PNG_FORMAT_FLAG_LINEAR +#define PNG_FORMAT_LINEAR_Y_ALPHA (PNG_FORMAT_FLAG_LINEAR|PNG_FORMAT_FLAG_ALPHA) +#define PNG_FORMAT_LINEAR_RGB (PNG_FORMAT_FLAG_LINEAR|PNG_FORMAT_FLAG_COLOR) +#define PNG_FORMAT_LINEAR_RGB_ALPHA \ + (PNG_FORMAT_FLAG_LINEAR|PNG_FORMAT_FLAG_COLOR|PNG_FORMAT_FLAG_ALPHA) + +/* With color-mapped formats the image data is one byte for each pixel, the byte + * is an index into the color-map which is formatted as above. To obtain a + * color-mapped format it is sufficient just to add the PNG_FOMAT_FLAG_COLORMAP + * to one of the above definitions, or you can use one of the definitions below. + */ +#define PNG_FORMAT_RGB_COLORMAP (PNG_FORMAT_RGB|PNG_FORMAT_FLAG_COLORMAP) +#define PNG_FORMAT_BGR_COLORMAP (PNG_FORMAT_BGR|PNG_FORMAT_FLAG_COLORMAP) +#define PNG_FORMAT_RGBA_COLORMAP (PNG_FORMAT_RGBA|PNG_FORMAT_FLAG_COLORMAP) +#define PNG_FORMAT_ARGB_COLORMAP (PNG_FORMAT_ARGB|PNG_FORMAT_FLAG_COLORMAP) +#define PNG_FORMAT_BGRA_COLORMAP (PNG_FORMAT_BGRA|PNG_FORMAT_FLAG_COLORMAP) +#define PNG_FORMAT_ABGR_COLORMAP (PNG_FORMAT_ABGR|PNG_FORMAT_FLAG_COLORMAP) + +/* PNG_IMAGE macros + * + * These are convenience macros to derive information from a png_image + * structure. The PNG_IMAGE_SAMPLE_ macros return values appropriate to the + * actual image sample values - either the entries in the color-map or the + * pixels in the image. The PNG_IMAGE_PIXEL_ macros return corresponding values + * for the pixels and will always return 1 for color-mapped formats. The + * remaining macros return information about the rows in the image and the + * complete image. + * + * NOTE: All the macros that take a png_image::format parameter are compile time + * constants if the format parameter is, itself, a constant. Therefore these + * macros can be used in array declarations and case labels where required. + * Similarly the macros are also pre-processor constants (sizeof is not used) so + * they can be used in #if tests. + * + * First the information about the samples. + */ +#define PNG_IMAGE_SAMPLE_CHANNELS(fmt)\ + (((fmt)&(PNG_FORMAT_FLAG_COLOR|PNG_FORMAT_FLAG_ALPHA))+1) + /* Return the total number of channels in a given format: 1..4 */ + +#define PNG_IMAGE_SAMPLE_COMPONENT_SIZE(fmt)\ + ((((fmt) & PNG_FORMAT_FLAG_LINEAR) >> 2)+1) + /* Return the size in bytes of a single component of a pixel or color-map + * entry (as appropriate) in the image: 1 or 2. + */ + +#define PNG_IMAGE_SAMPLE_SIZE(fmt)\ + (PNG_IMAGE_SAMPLE_CHANNELS(fmt) * PNG_IMAGE_SAMPLE_COMPONENT_SIZE(fmt)) + /* This is the size of the sample data for one sample. If the image is + * color-mapped it is the size of one color-map entry (and image pixels are + * one byte in size), otherwise it is the size of one image pixel. + */ + +#define PNG_IMAGE_MAXIMUM_COLORMAP_COMPONENTS(fmt)\ + (PNG_IMAGE_SAMPLE_CHANNELS(fmt) * 256) + /* The maximum size of the color-map required by the format expressed in a + * count of components. This can be used to compile-time allocate a + * color-map: + * + * png_uint_16 colormap[PNG_IMAGE_MAXIMUM_COLORMAP_COMPONENTS(linear_fmt)]; + * + * png_byte colormap[PNG_IMAGE_MAXIMUM_COLORMAP_COMPONENTS(sRGB_fmt)]; + * + * Alternatively use the PNG_IMAGE_COLORMAP_SIZE macro below to use the + * information from one of the png_image_begin_read_ APIs and dynamically + * allocate the required memory. + */ + +/* Corresponding information about the pixels */ +#define PNG_IMAGE_PIXEL_(test,fmt)\ + (((fmt)&PNG_FORMAT_FLAG_COLORMAP)?1:test(fmt)) + +#define PNG_IMAGE_PIXEL_CHANNELS(fmt)\ + PNG_IMAGE_PIXEL_(PNG_IMAGE_SAMPLE_CHANNELS,fmt) + /* The number of separate channels (components) in a pixel; 1 for a + * color-mapped image. + */ + +#define PNG_IMAGE_PIXEL_COMPONENT_SIZE(fmt)\ + PNG_IMAGE_PIXEL_(PNG_IMAGE_SAMPLE_COMPONENT_SIZE,fmt) + /* The size, in bytes, of each component in a pixel; 1 for a color-mapped + * image. + */ + +#define PNG_IMAGE_PIXEL_SIZE(fmt) PNG_IMAGE_PIXEL_(PNG_IMAGE_SAMPLE_SIZE,fmt) + /* The size, in bytes, of a complete pixel; 1 for a color-mapped image. */ + +/* Information about the whole row, or whole image */ +#define PNG_IMAGE_ROW_STRIDE(image)\ + (PNG_IMAGE_PIXEL_CHANNELS((image).format) * (image).width) + /* Return the total number of components in a single row of the image; this + * is the minimum 'row stride', the minimum count of components between each + * row. For a color-mapped image this is the minimum number of bytes in a + * row. + * + * WARNING: this macro overflows for some images with more than one component + * and very large image widths. libpng will refuse to process an image where + * this macro would overflow. + */ + +#define PNG_IMAGE_BUFFER_SIZE(image, row_stride)\ + (PNG_IMAGE_PIXEL_COMPONENT_SIZE((image).format)*(image).height*(row_stride)) + /* Return the size, in bytes, of an image buffer given a png_image and a row + * stride - the number of components to leave space for in each row. + * + * WARNING: this macro overflows a 32-bit integer for some large PNG images, + * libpng will refuse to process an image where such an overflow would occur. + */ + +#define PNG_IMAGE_SIZE(image)\ + PNG_IMAGE_BUFFER_SIZE(image, PNG_IMAGE_ROW_STRIDE(image)) + /* Return the size, in bytes, of the image in memory given just a png_image; + * the row stride is the minimum stride required for the image. + */ + +#define PNG_IMAGE_COLORMAP_SIZE(image)\ + (PNG_IMAGE_SAMPLE_SIZE((image).format) * (image).colormap_entries) + /* Return the size, in bytes, of the color-map of this image. If the image + * format is not a color-map format this will return a size sufficient for + * 256 entries in the given format; check PNG_FORMAT_FLAG_COLORMAP if + * you don't want to allocate a color-map in this case. + */ + +/* PNG_IMAGE_FLAG_* + * + * Flags containing additional information about the image are held in the + * 'flags' field of png_image. + */ +#define PNG_IMAGE_FLAG_COLORSPACE_NOT_sRGB 0x01 + /* This indicates that the RGB values of the in-memory bitmap do not + * correspond to the red, green and blue end-points defined by sRGB. + */ + +#define PNG_IMAGE_FLAG_FAST 0x02 + /* On write emphasise speed over compression; the resultant PNG file will be + * larger but will be produced significantly faster, particular for large + * images. Do not use this option for images which will be distributed, only + * used it when producing intermediate files that will be read back in + * repeatedly. For a typical 24-bit image the option will double the read + * speed at the cost of increasing the image size by 25%, however for many + * more compressible images the PNG file can be 10 times larger with only a + * slight speed gain. + */ + +#define PNG_IMAGE_FLAG_16BIT_sRGB 0x04 + /* On read if the image is a 16-bit per component image and there is no gAMA + * or sRGB chunk assume that the components are sRGB encoded. Notice that + * images output by the simplified API always have gamma information; setting + * this flag only affects the interpretation of 16-bit images from an + * external source. It is recommended that the application expose this flag + * to the user; the user can normally easily recognize the difference between + * linear and sRGB encoding. This flag has no effect on write - the data + * passed to the write APIs must have the correct encoding (as defined + * above.) + * + * If the flag is not set (the default) input 16-bit per component data is + * assumed to be linear. + * + * NOTE: the flag can only be set after the png_image_begin_read_ call, + * because that call initializes the 'flags' field. + */ + +#ifdef PNG_SIMPLIFIED_READ_SUPPORTED +/* READ APIs + * --------- + * + * The png_image passed to the read APIs must have been initialized by setting + * the png_controlp field 'opaque' to NULL (or, safer, memset the whole thing.) + */ +#ifdef PNG_STDIO_SUPPORTED +PNG_EXPORT(234, int, png_image_begin_read_from_file, (png_imagep image, + const char *file_name)); + /* The named file is opened for read and the image header is filled in + * from the PNG header in the file. + */ + +PNG_EXPORT(235, int, png_image_begin_read_from_stdio, (png_imagep image, + FILE* file)); + /* The PNG header is read from the stdio FILE object. */ +#endif /* STDIO */ + +PNG_EXPORT(236, int, png_image_begin_read_from_memory, (png_imagep image, + png_const_voidp memory, size_t size)); + /* The PNG header is read from the given memory buffer. */ + +PNG_EXPORT(237, int, png_image_finish_read, (png_imagep image, + png_const_colorp background, void *buffer, png_int_32 row_stride, + void *colormap)); + /* Finish reading the image into the supplied buffer and clean up the + * png_image structure. + * + * row_stride is the step, in byte or 2-byte units as appropriate, + * between adjacent rows. A positive stride indicates that the top-most row + * is first in the buffer - the normal top-down arrangement. A negative + * stride indicates that the bottom-most row is first in the buffer. + * + * background need only be supplied if an alpha channel must be removed from + * a png_byte format and the removal is to be done by compositing on a solid + * color; otherwise it may be NULL and any composition will be done directly + * onto the buffer. The value is an sRGB color to use for the background, + * for grayscale output the green channel is used. + * + * background must be supplied when an alpha channel must be removed from a + * single byte color-mapped output format, in other words if: + * + * 1) The original format from png_image_begin_read_from_* had + * PNG_FORMAT_FLAG_ALPHA set. + * 2) The format set by the application does not. + * 3) The format set by the application has PNG_FORMAT_FLAG_COLORMAP set and + * PNG_FORMAT_FLAG_LINEAR *not* set. + * + * For linear output removing the alpha channel is always done by compositing + * on black and background is ignored. + * + * colormap must be supplied when PNG_FORMAT_FLAG_COLORMAP is set. It must + * be at least the size (in bytes) returned by PNG_IMAGE_COLORMAP_SIZE. + * image->colormap_entries will be updated to the actual number of entries + * written to the colormap; this may be less than the original value. + */ + +PNG_EXPORT(238, void, png_image_free, (png_imagep image)); + /* Free any data allocated by libpng in image->opaque, setting the pointer to + * NULL. May be called at any time after the structure is initialized. + */ +#endif /* SIMPLIFIED_READ */ + +#ifdef PNG_SIMPLIFIED_WRITE_SUPPORTED +/* WRITE APIS + * ---------- + * For write you must initialize a png_image structure to describe the image to + * be written. To do this use memset to set the whole structure to 0 then + * initialize fields describing your image. + * + * version: must be set to PNG_IMAGE_VERSION + * opaque: must be initialized to NULL + * width: image width in pixels + * height: image height in rows + * format: the format of the data (image and color-map) you wish to write + * flags: set to 0 unless one of the defined flags applies; set + * PNG_IMAGE_FLAG_COLORSPACE_NOT_sRGB for color format images where the RGB + * values do not correspond to the colors in sRGB. + * colormap_entries: set to the number of entries in the color-map (0 to 256) + */ +#ifdef PNG_SIMPLIFIED_WRITE_STDIO_SUPPORTED +PNG_EXPORT(239, int, png_image_write_to_file, (png_imagep image, + const char *file, int convert_to_8bit, const void *buffer, + png_int_32 row_stride, const void *colormap)); + /* Write the image to the named file. */ + +PNG_EXPORT(240, int, png_image_write_to_stdio, (png_imagep image, FILE *file, + int convert_to_8_bit, const void *buffer, png_int_32 row_stride, + const void *colormap)); + /* Write the image to the given (FILE*). */ +#endif /* SIMPLIFIED_WRITE_STDIO */ + +/* With all write APIs if image is in one of the linear formats with 16-bit + * data then setting convert_to_8_bit will cause the output to be an 8-bit PNG + * gamma encoded according to the sRGB specification, otherwise a 16-bit linear + * encoded PNG file is written. + * + * With color-mapped data formats the colormap parameter point to a color-map + * with at least image->colormap_entries encoded in the specified format. If + * the format is linear the written PNG color-map will be converted to sRGB + * regardless of the convert_to_8_bit flag. + * + * With all APIs row_stride is handled as in the read APIs - it is the spacing + * from one row to the next in component sized units (1 or 2 bytes) and if + * negative indicates a bottom-up row layout in the buffer. If row_stride is + * zero, libpng will calculate it for you from the image width and number of + * channels. + * + * Note that the write API does not support interlacing, sub-8-bit pixels or + * most ancillary chunks. If you need to write text chunks (e.g. for copyright + * notices) you need to use one of the other APIs. + */ + +PNG_EXPORT(245, int, png_image_write_to_memory, (png_imagep image, void *memory, + png_alloc_size_t * PNG_RESTRICT memory_bytes, int convert_to_8_bit, + const void *buffer, png_int_32 row_stride, const void *colormap)); + /* Write the image to the given memory buffer. The function both writes the + * whole PNG data stream to *memory and updates *memory_bytes with the count + * of bytes written. + * + * 'memory' may be NULL. In this case *memory_bytes is not read however on + * success the number of bytes which would have been written will still be + * stored in *memory_bytes. On failure *memory_bytes will contain 0. + * + * If 'memory' is not NULL it must point to memory[*memory_bytes] of + * writeable memory. + * + * If the function returns success memory[*memory_bytes] (if 'memory' is not + * NULL) contains the written PNG data. *memory_bytes will always be less + * than or equal to the original value. + * + * If the function returns false and *memory_bytes was not changed an error + * occurred during write. If *memory_bytes was changed, or is not 0 if + * 'memory' was NULL, the write would have succeeded but for the memory + * buffer being too small. *memory_bytes contains the required number of + * bytes and will be bigger that the original value. + */ + +#define png_image_write_get_memory_size(image, size, convert_to_8_bit, buffer,\ + row_stride, colormap)\ + png_image_write_to_memory(&(image), 0, &(size), convert_to_8_bit, buffer,\ + row_stride, colormap) + /* Return the amount of memory in 'size' required to compress this image. + * The png_image structure 'image' must be filled in as in the above + * function and must not be changed before the actual write call, the buffer + * and all other parameters must also be identical to that in the final + * write call. The 'size' variable need not be initialized. + * + * NOTE: the macro returns true/false, if false is returned 'size' will be + * set to zero and the write failed and probably will fail if tried again. + */ + +/* You can pre-allocate the buffer by making sure it is of sufficient size + * regardless of the amount of compression achieved. The buffer size will + * always be bigger than the original image and it will never be filled. The + * following macros are provided to assist in allocating the buffer. + */ +#define PNG_IMAGE_DATA_SIZE(image) (PNG_IMAGE_SIZE(image)+(image).height) + /* The number of uncompressed bytes in the PNG byte encoding of the image; + * uncompressing the PNG IDAT data will give this number of bytes. + * + * NOTE: while PNG_IMAGE_SIZE cannot overflow for an image in memory this + * macro can because of the extra bytes used in the PNG byte encoding. You + * need to avoid this macro if your image size approaches 2^30 in width or + * height. The same goes for the remainder of these macros; they all produce + * bigger numbers than the actual in-memory image size. + */ +#ifndef PNG_ZLIB_MAX_SIZE +# define PNG_ZLIB_MAX_SIZE(b) ((b)+(((b)+7U)>>3)+(((b)+63U)>>6)+11U) + /* An upper bound on the number of compressed bytes given 'b' uncompressed + * bytes. This is based on deflateBounds() in zlib; different + * implementations of zlib compression may conceivably produce more data so + * if your zlib implementation is not zlib itself redefine this macro + * appropriately. + */ +#endif + +#define PNG_IMAGE_COMPRESSED_SIZE_MAX(image)\ + PNG_ZLIB_MAX_SIZE((png_alloc_size_t)PNG_IMAGE_DATA_SIZE(image)) + /* An upper bound on the size of the data in the PNG IDAT chunks. */ + +#define PNG_IMAGE_PNG_SIZE_MAX_(image, image_size)\ + ((8U/*sig*/+25U/*IHDR*/+16U/*gAMA*/+44U/*cHRM*/+12U/*IEND*/+\ + (((image).format&PNG_FORMAT_FLAG_COLORMAP)?/*colormap: PLTE, tRNS*/\ + 12U+3U*(image).colormap_entries/*PLTE data*/+\ + (((image).format&PNG_FORMAT_FLAG_ALPHA)?\ + 12U/*tRNS*/+(image).colormap_entries:0U):0U)+\ + 12U)+(12U*((image_size)/PNG_ZBUF_SIZE))/*IDAT*/+(image_size)) + /* A helper for the following macro; if your compiler cannot handle the + * following macro use this one with the result of + * PNG_IMAGE_COMPRESSED_SIZE_MAX(image) as the second argument (most + * compilers should handle this just fine.) + */ + +#define PNG_IMAGE_PNG_SIZE_MAX(image)\ + PNG_IMAGE_PNG_SIZE_MAX_(image, PNG_IMAGE_COMPRESSED_SIZE_MAX(image)) + /* An upper bound on the total length of the PNG data stream for 'image'. + * The result is of type png_alloc_size_t, on 32-bit systems this may + * overflow even though PNG_IMAGE_DATA_SIZE does not overflow; the write will + * run out of buffer space but return a corrected size which should work. + */ +#endif /* SIMPLIFIED_WRITE */ +/******************************************************************************* + * END OF SIMPLIFIED API + ******************************************************************************/ +#endif /* SIMPLIFIED_{READ|WRITE} */ + +/******************************************************************************* + * Section 6: IMPLEMENTATION OPTIONS + ******************************************************************************* + * + * Support for arbitrary implementation-specific optimizations. The API allows + * particular options to be turned on or off. 'Option' is the number of the + * option and 'onoff' is 0 (off) or non-0 (on). The value returned is given + * by the PNG_OPTION_ defines below. + * + * HARDWARE: normally hardware capabilities, such as the Intel SSE instructions, + * are detected at run time, however sometimes it may be impossible + * to do this in user mode, in which case it is necessary to discover + * the capabilities in an OS specific way. Such capabilities are + * listed here when libpng has support for them and must be turned + * ON by the application if present. + * + * SOFTWARE: sometimes software optimizations actually result in performance + * decrease on some architectures or systems, or with some sets of + * PNG images. 'Software' options allow such optimizations to be + * selected at run time. + */ +#ifdef PNG_SET_OPTION_SUPPORTED +#ifdef PNG_ARM_NEON_API_SUPPORTED +# define PNG_ARM_NEON 0 /* HARDWARE: ARM Neon SIMD instructions supported */ +#endif +#define PNG_MAXIMUM_INFLATE_WINDOW 2 /* SOFTWARE: force maximum window */ +#define PNG_SKIP_sRGB_CHECK_PROFILE 4 /* SOFTWARE: Check ICC profile for sRGB */ +#ifdef PNG_MIPS_MSA_API_SUPPORTED +# define PNG_MIPS_MSA 6 /* HARDWARE: MIPS Msa SIMD instructions supported */ +#endif +#ifdef PNG_DISABLE_ADLER32_CHECK_SUPPORTED +# define PNG_IGNORE_ADLER32 8 /* SOFTWARE: disable Adler32 check on IDAT */ +#endif +#ifdef PNG_POWERPC_VSX_API_SUPPORTED +# define PNG_POWERPC_VSX 10 /* HARDWARE: PowerPC VSX SIMD instructions + * supported */ +#endif +#ifdef PNG_MIPS_MMI_API_SUPPORTED +# define PNG_MIPS_MMI 12 /* HARDWARE: MIPS MMI SIMD instructions supported */ +#endif + +#define PNG_OPTION_NEXT 14 /* Next option - numbers must be even */ + +/* Return values: NOTE: there are four values and 'off' is *not* zero */ +#define PNG_OPTION_UNSET 0 /* Unset - defaults to off */ +#define PNG_OPTION_INVALID 1 /* Option number out of range */ +#define PNG_OPTION_OFF 2 +#define PNG_OPTION_ON 3 + +PNG_EXPORT(244, int, png_set_option, (png_structrp png_ptr, int option, + int onoff)); +#endif /* SET_OPTION */ + +/******************************************************************************* + * END OF HARDWARE AND SOFTWARE OPTIONS + ******************************************************************************/ + +/* Maintainer: Put new public prototypes here ^, in libpng.3, in project + * defs, and in scripts/symbols.def. + */ + +/* The last ordinal number (this is the *last* one already used; the next + * one to use is one more than this.) + */ +#ifdef PNG_EXPORT_LAST_ORDINAL + PNG_EXPORT_LAST_ORDINAL(259); +#endif + +#ifdef __cplusplus +} +#endif + +#endif /* PNG_VERSION_INFO_ONLY */ +/* Do not put anything past this line */ +#endif /* PNG_H */ diff --git a/dependencies/linux64/include/pngconf.h b/dependencies/linux64/include/pngconf.h new file mode 100644 index 0000000..42fa973 --- /dev/null +++ b/dependencies/linux64/include/pngconf.h @@ -0,0 +1,622 @@ +/* pngconf.h - machine-configurable file for libpng + * + * libpng version 1.6.47 + * + * Copyright (c) 2018-2025 Cosmin Truta + * Copyright (c) 1998-2002,2004,2006-2016,2018 Glenn Randers-Pehrson + * Copyright (c) 1996-1997 Andreas Dilger + * Copyright (c) 1995-1996 Guy Eric Schalnat, Group 42, Inc. + * + * This code is released under the libpng license. + * For conditions of distribution and use, see the disclaimer + * and license in png.h + * + * Any machine specific code is near the front of this file, so if you + * are configuring libpng for a machine, you may want to read the section + * starting here down to where it starts to typedef png_color, png_text, + * and png_info. + */ + +#ifndef PNGCONF_H +#define PNGCONF_H + +#ifndef PNG_BUILDING_SYMBOL_TABLE /* else includes may cause problems */ + +/* From libpng 1.6.0 libpng requires an ANSI X3.159-1989 ("ISOC90") compliant C + * compiler for correct compilation. The following header files are required by + * the standard. If your compiler doesn't provide these header files, or they + * do not match the standard, you will need to provide/improve them. + */ +#include +#include + +/* Library header files. These header files are all defined by ISOC90; libpng + * expects conformant implementations, however, an ISOC90 conformant system need + * not provide these header files if the functionality cannot be implemented. + * In this case it will be necessary to disable the relevant parts of libpng in + * the build of pnglibconf.h. + * + * Prior to 1.6.0 string.h was included here; the API changes in 1.6.0 to not + * include this unnecessary header file. + */ + +#ifdef PNG_STDIO_SUPPORTED + /* Required for the definition of FILE: */ +# include +#endif + +#ifdef PNG_SETJMP_SUPPORTED + /* Required for the definition of jmp_buf and the declaration of longjmp: */ +# include +#endif + +#ifdef PNG_CONVERT_tIME_SUPPORTED + /* Required for struct tm: */ +# include +#endif + +#endif /* PNG_BUILDING_SYMBOL_TABLE */ + +/* Prior to 1.6.0, it was possible to turn off 'const' in declarations, + * using PNG_NO_CONST. This is no longer supported. + */ +#define PNG_CONST const /* backward compatibility only */ + +/* This controls optimization of the reading of 16-bit and 32-bit + * values from PNG files. It can be set on a per-app-file basis: it + * just changes whether a macro is used when the function is called. + * The library builder sets the default; if read functions are not + * built into the library the macro implementation is forced on. + */ +#ifndef PNG_READ_INT_FUNCTIONS_SUPPORTED +# define PNG_USE_READ_MACROS +#endif +#if !defined(PNG_NO_USE_READ_MACROS) && !defined(PNG_USE_READ_MACROS) +# if PNG_DEFAULT_READ_MACROS +# define PNG_USE_READ_MACROS +# endif +#endif + +/* COMPILER SPECIFIC OPTIONS. + * + * These options are provided so that a variety of difficult compilers + * can be used. Some are fixed at build time (e.g. PNG_API_RULE + * below) but still have compiler specific implementations, others + * may be changed on a per-file basis when compiling against libpng. + */ + +/* The PNGARG macro was used in versions of libpng prior to 1.6.0 to protect + * against legacy (pre ISOC90) compilers that did not understand function + * prototypes. [Deprecated.] + */ +#ifndef PNGARG +# define PNGARG(arglist) arglist +#endif + +/* Function calling conventions. + * ============================= + * Normally it is not necessary to specify to the compiler how to call + * a function - it just does it - however on x86 systems derived from + * Microsoft and Borland C compilers ('IBM PC', 'DOS', 'Windows' systems + * and some others) there are multiple ways to call a function and the + * default can be changed on the compiler command line. For this reason + * libpng specifies the calling convention of every exported function and + * every function called via a user supplied function pointer. This is + * done in this file by defining the following macros: + * + * PNGAPI Calling convention for exported functions. + * PNGCBAPI Calling convention for user provided (callback) functions. + * PNGCAPI Calling convention used by the ANSI-C library (required + * for longjmp callbacks and sometimes used internally to + * specify the calling convention for zlib). + * + * These macros should never be overridden. If it is necessary to + * change calling convention in a private build this can be done + * by setting PNG_API_RULE (which defaults to 0) to one of the values + * below to select the correct 'API' variants. + * + * PNG_API_RULE=0 Use PNGCAPI - the 'C' calling convention - throughout. + * This is correct in every known environment. + * PNG_API_RULE=1 Use the operating system convention for PNGAPI and + * the 'C' calling convention (from PNGCAPI) for + * callbacks (PNGCBAPI). This is no longer required + * in any known environment - if it has to be used + * please post an explanation of the problem to the + * libpng mailing list. + * + * These cases only differ if the operating system does not use the C + * calling convention, at present this just means the above cases + * (x86 DOS/Windows systems) and, even then, this does not apply to + * Cygwin running on those systems. + * + * Note that the value must be defined in pnglibconf.h so that what + * the application uses to call the library matches the conventions + * set when building the library. + */ + +/* Symbol export + * ============= + * When building a shared library it is almost always necessary to tell + * the compiler which symbols to export. The png.h macro 'PNG_EXPORT' + * is used to mark the symbols. On some systems these symbols can be + * extracted at link time and need no special processing by the compiler, + * on other systems the symbols are flagged by the compiler and just + * the declaration requires a special tag applied (unfortunately) in a + * compiler dependent way. Some systems can do either. + * + * A small number of older systems also require a symbol from a DLL to + * be flagged to the program that calls it. This is a problem because + * we do not know in the header file included by application code that + * the symbol will come from a shared library, as opposed to a statically + * linked one. For this reason the application must tell us by setting + * the magic flag PNG_USE_DLL to turn on the special processing before + * it includes png.h. + * + * Four additional macros are used to make this happen: + * + * PNG_IMPEXP The magic (if any) to cause a symbol to be exported from + * the build or imported if PNG_USE_DLL is set - compiler + * and system specific. + * + * PNG_EXPORT_TYPE(type) A macro that pre or appends PNG_IMPEXP to + * 'type', compiler specific. + * + * PNG_DLL_EXPORT Set to the magic to use during a libpng build to + * make a symbol exported from the DLL. Not used in the + * public header files; see pngpriv.h for how it is used + * in the libpng build. + * + * PNG_DLL_IMPORT Set to the magic to force the libpng symbols to come + * from a DLL - used to define PNG_IMPEXP when + * PNG_USE_DLL is set. + */ + +/* System specific discovery. + * ========================== + * This code is used at build time to find PNG_IMPEXP, the API settings + * and PNG_EXPORT_TYPE(), it may also set a macro to indicate the DLL + * import processing is possible. On Windows systems it also sets + * compiler-specific macros to the values required to change the calling + * conventions of the various functions. + */ +#if defined(_WIN32) || defined(__WIN32__) || defined(__NT__) || \ + defined(__CYGWIN__) + /* Windows system (DOS doesn't support DLLs). Includes builds under Cygwin or + * MinGW on any architecture currently supported by Windows. Also includes + * Watcom builds but these need special treatment because they are not + * compatible with GCC or Visual C because of different calling conventions. + */ +# if PNG_API_RULE == 2 + /* If this line results in an error, either because __watcall is not + * understood or because of a redefine just below you cannot use *this* + * build of the library with the compiler you are using. *This* build was + * build using Watcom and applications must also be built using Watcom! + */ +# define PNGCAPI __watcall +# endif + +# if defined(__GNUC__) || (defined(_MSC_VER) && (_MSC_VER >= 800)) +# define PNGCAPI __cdecl +# if PNG_API_RULE == 1 + /* If this line results in an error __stdcall is not understood and + * PNG_API_RULE should not have been set to '1'. + */ +# define PNGAPI __stdcall +# endif +# else + /* An older compiler, or one not detected (erroneously) above, + * if necessary override on the command line to get the correct + * variants for the compiler. + */ +# ifndef PNGCAPI +# define PNGCAPI _cdecl +# endif +# if PNG_API_RULE == 1 && !defined(PNGAPI) +# define PNGAPI _stdcall +# endif +# endif /* compiler/api */ + + /* NOTE: PNGCBAPI always defaults to PNGCAPI. */ + +# if defined(PNGAPI) && !defined(PNG_USER_PRIVATEBUILD) +# error "PNG_USER_PRIVATEBUILD must be defined if PNGAPI is changed" +# endif + +# if (defined(_MSC_VER) && _MSC_VER < 800) ||\ + (defined(__BORLANDC__) && __BORLANDC__ < 0x500) + /* older Borland and MSC + * compilers used '__export' and required this to be after + * the type. + */ +# ifndef PNG_EXPORT_TYPE +# define PNG_EXPORT_TYPE(type) type PNG_IMPEXP +# endif +# define PNG_DLL_EXPORT __export +# else /* newer compiler */ +# define PNG_DLL_EXPORT __declspec(dllexport) +# ifndef PNG_DLL_IMPORT +# define PNG_DLL_IMPORT __declspec(dllimport) +# endif +# endif /* compiler */ + +#else /* !Windows */ +# if (defined(__IBMC__) || defined(__IBMCPP__)) && defined(__OS2__) +# define PNGAPI _System +# else /* !Windows/x86 && !OS/2 */ + /* Use the defaults, or define PNG*API on the command line (but + * this will have to be done for every compile!) + */ +# endif /* other system, !OS/2 */ +#endif /* !Windows/x86 */ + +/* Now do all the defaulting . */ +#ifndef PNGCAPI +# define PNGCAPI +#endif +#ifndef PNGCBAPI +# define PNGCBAPI PNGCAPI +#endif +#ifndef PNGAPI +# define PNGAPI PNGCAPI +#endif + +/* PNG_IMPEXP may be set on the compilation system command line or (if not set) + * then in an internal header file when building the library, otherwise (when + * using the library) it is set here. + */ +#ifndef PNG_IMPEXP +# if defined(PNG_USE_DLL) && defined(PNG_DLL_IMPORT) + /* This forces use of a DLL, disallowing static linking */ +# define PNG_IMPEXP PNG_DLL_IMPORT +# endif + +# ifndef PNG_IMPEXP +# define PNG_IMPEXP +# endif +#endif + +/* In 1.5.2 the definition of PNG_FUNCTION has been changed to always treat + * 'attributes' as a storage class - the attributes go at the start of the + * function definition, and attributes are always appended regardless of the + * compiler. This considerably simplifies these macros but may cause problems + * if any compilers both need function attributes and fail to handle them as + * a storage class (this is unlikely.) + */ +#ifndef PNG_FUNCTION +# define PNG_FUNCTION(type, name, args, attributes) attributes type name args +#endif + +#ifndef PNG_EXPORT_TYPE +# define PNG_EXPORT_TYPE(type) PNG_IMPEXP type +#endif + + /* The ordinal value is only relevant when preprocessing png.h for symbol + * table entries, so we discard it here. See the .dfn files in the + * scripts directory. + */ + +#ifndef PNG_EXPORTA +# define PNG_EXPORTA(ordinal, type, name, args, attributes) \ + PNG_FUNCTION(PNG_EXPORT_TYPE(type), (PNGAPI name), args, \ + PNG_LINKAGE_API attributes) +#endif + +/* ANSI-C (C90) does not permit a macro to be invoked with an empty argument, + * so make something non-empty to satisfy the requirement: + */ +#define PNG_EMPTY /*empty list*/ + +#define PNG_EXPORT(ordinal, type, name, args) \ + PNG_EXPORTA(ordinal, type, name, args, PNG_EMPTY) + +/* Use PNG_REMOVED to comment out a removed interface. */ +#ifndef PNG_REMOVED +# define PNG_REMOVED(ordinal, type, name, args, attributes) +#endif + +#ifndef PNG_CALLBACK +# define PNG_CALLBACK(type, name, args) type (PNGCBAPI name) args +#endif + +/* Support for compiler specific function attributes. These are used + * so that where compiler support is available incorrect use of API + * functions in png.h will generate compiler warnings. + * + * Added at libpng-1.2.41. + */ + +#ifndef PNG_NO_PEDANTIC_WARNINGS +# ifndef PNG_PEDANTIC_WARNINGS_SUPPORTED +# define PNG_PEDANTIC_WARNINGS_SUPPORTED +# endif +#endif + +#ifdef PNG_PEDANTIC_WARNINGS_SUPPORTED + /* Support for compiler specific function attributes. These are used + * so that where compiler support is available, incorrect use of API + * functions in png.h will generate compiler warnings. Added at libpng + * version 1.2.41. Disabling these removes the warnings but may also produce + * less efficient code. + */ +# if defined(__clang__) && defined(__has_attribute) + /* Clang defines both __clang__ and __GNUC__. Check __clang__ first. */ +# if !defined(PNG_USE_RESULT) && __has_attribute(__warn_unused_result__) +# define PNG_USE_RESULT __attribute__((__warn_unused_result__)) +# endif +# if !defined(PNG_NORETURN) && __has_attribute(__noreturn__) +# define PNG_NORETURN __attribute__((__noreturn__)) +# endif +# if !defined(PNG_ALLOCATED) && __has_attribute(__malloc__) +# define PNG_ALLOCATED __attribute__((__malloc__)) +# endif +# if !defined(PNG_DEPRECATED) && __has_attribute(__deprecated__) +# define PNG_DEPRECATED __attribute__((__deprecated__)) +# endif +# if !defined(PNG_PRIVATE) +# ifdef __has_extension +# if __has_extension(attribute_unavailable_with_message) +# define PNG_PRIVATE __attribute__((__unavailable__(\ + "This function is not exported by libpng."))) +# endif +# endif +# endif +# ifndef PNG_RESTRICT +# define PNG_RESTRICT __restrict +# endif + +# elif defined(__GNUC__) +# ifndef PNG_USE_RESULT +# define PNG_USE_RESULT __attribute__((__warn_unused_result__)) +# endif +# ifndef PNG_NORETURN +# define PNG_NORETURN __attribute__((__noreturn__)) +# endif +# if __GNUC__ >= 3 +# ifndef PNG_ALLOCATED +# define PNG_ALLOCATED __attribute__((__malloc__)) +# endif +# ifndef PNG_DEPRECATED +# define PNG_DEPRECATED __attribute__((__deprecated__)) +# endif +# ifndef PNG_PRIVATE +# if 0 /* Doesn't work so we use deprecated instead*/ +# define PNG_PRIVATE \ + __attribute__((warning("This function is not exported by libpng."))) +# else +# define PNG_PRIVATE \ + __attribute__((__deprecated__)) +# endif +# endif +# if ((__GNUC__ > 3) || !defined(__GNUC_MINOR__) || (__GNUC_MINOR__ >= 1)) +# ifndef PNG_RESTRICT +# define PNG_RESTRICT __restrict +# endif +# endif /* __GNUC__.__GNUC_MINOR__ > 3.0 */ +# endif /* __GNUC__ >= 3 */ + +# elif defined(_MSC_VER) && (_MSC_VER >= 1300) +# ifndef PNG_USE_RESULT +# define PNG_USE_RESULT /* not supported */ +# endif +# ifndef PNG_NORETURN +# define PNG_NORETURN __declspec(noreturn) +# endif +# ifndef PNG_ALLOCATED +# if (_MSC_VER >= 1400) +# define PNG_ALLOCATED __declspec(restrict) +# endif +# endif +# ifndef PNG_DEPRECATED +# define PNG_DEPRECATED __declspec(deprecated) +# endif +# ifndef PNG_PRIVATE +# define PNG_PRIVATE __declspec(deprecated) +# endif +# ifndef PNG_RESTRICT +# if (_MSC_VER >= 1400) +# define PNG_RESTRICT __restrict +# endif +# endif + +# elif defined(__WATCOMC__) +# ifndef PNG_RESTRICT +# define PNG_RESTRICT __restrict +# endif +# endif +#endif /* PNG_PEDANTIC_WARNINGS */ + +#ifndef PNG_DEPRECATED +# define PNG_DEPRECATED /* Use of this function is deprecated */ +#endif +#ifndef PNG_USE_RESULT +# define PNG_USE_RESULT /* The result of this function must be checked */ +#endif +#ifndef PNG_NORETURN +# define PNG_NORETURN /* This function does not return */ +#endif +#ifndef PNG_ALLOCATED +# define PNG_ALLOCATED /* The result of the function is new memory */ +#endif +#ifndef PNG_PRIVATE +# define PNG_PRIVATE /* This is a private libpng function */ +#endif +#ifndef PNG_RESTRICT +# define PNG_RESTRICT /* The C99 "restrict" feature */ +#endif + +#ifndef PNG_FP_EXPORT /* A floating point API. */ +# ifdef PNG_FLOATING_POINT_SUPPORTED +# define PNG_FP_EXPORT(ordinal, type, name, args)\ + PNG_EXPORT(ordinal, type, name, args); +# else /* No floating point APIs */ +# define PNG_FP_EXPORT(ordinal, type, name, args) +# endif +#endif +#ifndef PNG_FIXED_EXPORT /* A fixed point API. */ +# ifdef PNG_FIXED_POINT_SUPPORTED +# define PNG_FIXED_EXPORT(ordinal, type, name, args)\ + PNG_EXPORT(ordinal, type, name, args); +# else /* No fixed point APIs */ +# define PNG_FIXED_EXPORT(ordinal, type, name, args) +# endif +#endif + +#ifndef PNG_BUILDING_SYMBOL_TABLE +/* Some typedefs to get us started. These should be safe on most of the common + * platforms. + * + * png_uint_32 and png_int_32 may, currently, be larger than required to hold a + * 32-bit value however this is not normally advisable. + * + * png_uint_16 and png_int_16 should always be two bytes in size - this is + * verified at library build time. + * + * png_byte must always be one byte in size. + * + * The checks below use constants from limits.h, as defined by the ISOC90 + * standard. + */ +#if CHAR_BIT == 8 && UCHAR_MAX == 255 + typedef unsigned char png_byte; +#else +# error "libpng requires 8-bit bytes" +#endif + +#if INT_MIN == -32768 && INT_MAX == 32767 + typedef int png_int_16; +#elif SHRT_MIN == -32768 && SHRT_MAX == 32767 + typedef short png_int_16; +#else +# error "libpng requires a signed 16-bit type" +#endif + +#if UINT_MAX == 65535 + typedef unsigned int png_uint_16; +#elif USHRT_MAX == 65535 + typedef unsigned short png_uint_16; +#else +# error "libpng requires an unsigned 16-bit type" +#endif + +#if INT_MIN < -2147483646 && INT_MAX > 2147483646 + typedef int png_int_32; +#elif LONG_MIN < -2147483646 && LONG_MAX > 2147483646 + typedef long int png_int_32; +#else +# error "libpng requires a signed 32-bit (or more) type" +#endif + +#if UINT_MAX > 4294967294U + typedef unsigned int png_uint_32; +#elif ULONG_MAX > 4294967294U + typedef unsigned long int png_uint_32; +#else +# error "libpng requires an unsigned 32-bit (or more) type" +#endif + +/* Prior to 1.6.0, it was possible to disable the use of size_t and ptrdiff_t. + * From 1.6.0 onwards, an ISO C90 compiler, as well as a standard-compliant + * behavior of sizeof and ptrdiff_t are required. + * The legacy typedefs are provided here for backwards compatibility. + */ +typedef size_t png_size_t; +typedef ptrdiff_t png_ptrdiff_t; + +/* libpng needs to know the maximum value of 'size_t' and this controls the + * definition of png_alloc_size_t, below. This maximum value of size_t limits + * but does not control the maximum allocations the library makes - there is + * direct application control of this through png_set_user_limits(). + */ +#ifndef PNG_SMALL_SIZE_T + /* Compiler specific tests for systems where size_t is known to be less than + * 32 bits (some of these systems may no longer work because of the lack of + * 'far' support; see above.) + */ +# if (defined(__TURBOC__) && !defined(__FLAT__)) ||\ + (defined(_MSC_VER) && defined(MAXSEG_64K)) +# define PNG_SMALL_SIZE_T +# endif +#endif + +/* png_alloc_size_t is guaranteed to be no smaller than size_t, and no smaller + * than png_uint_32. Casts from size_t or png_uint_32 to png_alloc_size_t are + * not necessary; in fact, it is recommended not to use them at all, so that + * the compiler can complain when something turns out to be problematic. + * + * Casts in the other direction (from png_alloc_size_t to size_t or + * png_uint_32) should be explicitly applied; however, we do not expect to + * encounter practical situations that require such conversions. + * + * PNG_SMALL_SIZE_T must be defined if the maximum value of size_t is less than + * 4294967295 - i.e. less than the maximum value of png_uint_32. + */ +#ifdef PNG_SMALL_SIZE_T + typedef png_uint_32 png_alloc_size_t; +#else + typedef size_t png_alloc_size_t; +#endif + +/* Prior to 1.6.0 libpng offered limited support for Microsoft C compiler + * implementations of Intel CPU specific support of user-mode segmented address + * spaces, where 16-bit pointers address more than 65536 bytes of memory using + * separate 'segment' registers. The implementation requires two different + * types of pointer (only one of which includes the segment value.) + * + * If required this support is available in version 1.2 of libpng and may be + * available in versions through 1.5, although the correctness of the code has + * not been verified recently. + */ + +/* Typedef for floating-point numbers that are converted to fixed-point with a + * multiple of 100,000, e.g., gamma + */ +typedef png_int_32 png_fixed_point; + +/* Add typedefs for pointers */ +typedef void * png_voidp; +typedef const void * png_const_voidp; +typedef png_byte * png_bytep; +typedef const png_byte * png_const_bytep; +typedef png_uint_32 * png_uint_32p; +typedef const png_uint_32 * png_const_uint_32p; +typedef png_int_32 * png_int_32p; +typedef const png_int_32 * png_const_int_32p; +typedef png_uint_16 * png_uint_16p; +typedef const png_uint_16 * png_const_uint_16p; +typedef png_int_16 * png_int_16p; +typedef const png_int_16 * png_const_int_16p; +typedef char * png_charp; +typedef const char * png_const_charp; +typedef png_fixed_point * png_fixed_point_p; +typedef const png_fixed_point * png_const_fixed_point_p; +typedef size_t * png_size_tp; +typedef const size_t * png_const_size_tp; + +#ifdef PNG_STDIO_SUPPORTED +typedef FILE * png_FILE_p; +#endif + +#ifdef PNG_FLOATING_POINT_SUPPORTED +typedef double * png_doublep; +typedef const double * png_const_doublep; +#endif + +/* Pointers to pointers; i.e. arrays */ +typedef png_byte * * png_bytepp; +typedef png_uint_32 * * png_uint_32pp; +typedef png_int_32 * * png_int_32pp; +typedef png_uint_16 * * png_uint_16pp; +typedef png_int_16 * * png_int_16pp; +typedef const char * * png_const_charpp; +typedef char * * png_charpp; +typedef png_fixed_point * * png_fixed_point_pp; +#ifdef PNG_FLOATING_POINT_SUPPORTED +typedef double * * png_doublepp; +#endif + +/* Pointers to pointers to pointers; i.e., pointer to array */ +typedef char * * * png_charppp; + +#endif /* PNG_BUILDING_SYMBOL_TABLE */ + +#endif /* PNGCONF_H */ diff --git a/dependencies/linux64/include/pnglibconf.h b/dependencies/linux64/include/pnglibconf.h new file mode 100644 index 0000000..17245b4 --- /dev/null +++ b/dependencies/linux64/include/pnglibconf.h @@ -0,0 +1,233 @@ +/* pnglibconf.h - library build configuration */ + +/* libpng version 1.6.47 */ + +/* Copyright (c) 2018-2025 Cosmin Truta */ +/* Copyright (c) 1998-2002,2004,2006-2018 Glenn Randers-Pehrson */ + +/* This code is released under the libpng license. */ +/* For conditions of distribution and use, see the disclaimer */ +/* and license in png.h */ + +/* pnglibconf.h */ +/* Machine generated file: DO NOT EDIT */ +/* Derived from: scripts/pnglibconf.dfa */ +#ifndef PNGLCONF_H +#define PNGLCONF_H +/* options */ +#define PNG_16BIT_SUPPORTED +#define PNG_ALIGNED_MEMORY_SUPPORTED +/*#undef PNG_ARM_NEON_API_SUPPORTED*/ +/*#undef PNG_ARM_NEON_CHECK_SUPPORTED*/ +#define PNG_BENIGN_ERRORS_SUPPORTED +#define PNG_BENIGN_READ_ERRORS_SUPPORTED +/*#undef PNG_BENIGN_WRITE_ERRORS_SUPPORTED*/ +#define PNG_BUILD_GRAYSCALE_PALETTE_SUPPORTED +#define PNG_CHECK_FOR_INVALID_INDEX_SUPPORTED +#define PNG_COLORSPACE_SUPPORTED +#define PNG_CONSOLE_IO_SUPPORTED +#define PNG_CONVERT_tIME_SUPPORTED +/*#undef PNG_DISABLE_ADLER32_CHECK_SUPPORTED*/ +#define PNG_EASY_ACCESS_SUPPORTED +/*#undef PNG_ERROR_NUMBERS_SUPPORTED*/ +#define PNG_ERROR_TEXT_SUPPORTED +#define PNG_FIXED_POINT_SUPPORTED +#define PNG_FLOATING_ARITHMETIC_SUPPORTED +#define PNG_FLOATING_POINT_SUPPORTED +#define PNG_FORMAT_AFIRST_SUPPORTED +#define PNG_FORMAT_BGR_SUPPORTED +#define PNG_GAMMA_SUPPORTED +#define PNG_GET_PALETTE_MAX_SUPPORTED +#define PNG_HANDLE_AS_UNKNOWN_SUPPORTED +#define PNG_INCH_CONVERSIONS_SUPPORTED +#define PNG_INFO_IMAGE_SUPPORTED +#define PNG_IO_STATE_SUPPORTED +/*#undef PNG_MIPS_MMI_API_SUPPORTED*/ +/*#undef PNG_MIPS_MMI_CHECK_SUPPORTED*/ +/*#undef PNG_MIPS_MSA_API_SUPPORTED*/ +/*#undef PNG_MIPS_MSA_CHECK_SUPPORTED*/ +#define PNG_MNG_FEATURES_SUPPORTED +#define PNG_POINTER_INDEXING_SUPPORTED +/*#undef PNG_POWERPC_VSX_API_SUPPORTED*/ +/*#undef PNG_POWERPC_VSX_CHECK_SUPPORTED*/ +#define PNG_PROGRESSIVE_READ_SUPPORTED +#define PNG_READ_16BIT_SUPPORTED +#define PNG_READ_ALPHA_MODE_SUPPORTED +#define PNG_READ_ANCILLARY_CHUNKS_SUPPORTED +#define PNG_READ_BACKGROUND_SUPPORTED +#define PNG_READ_BGR_SUPPORTED +#define PNG_READ_CHECK_FOR_INVALID_INDEX_SUPPORTED +#define PNG_READ_COMPOSITE_NODIV_SUPPORTED +#define PNG_READ_COMPRESSED_TEXT_SUPPORTED +#define PNG_READ_EXPAND_16_SUPPORTED +#define PNG_READ_EXPAND_SUPPORTED +#define PNG_READ_FILLER_SUPPORTED +#define PNG_READ_GAMMA_SUPPORTED +#define PNG_READ_GET_PALETTE_MAX_SUPPORTED +#define PNG_READ_GRAY_TO_RGB_SUPPORTED +#define PNG_READ_INTERLACING_SUPPORTED +#define PNG_READ_INT_FUNCTIONS_SUPPORTED +#define PNG_READ_INVERT_ALPHA_SUPPORTED +#define PNG_READ_INVERT_SUPPORTED +#define PNG_READ_OPT_PLTE_SUPPORTED +#define PNG_READ_PACKSWAP_SUPPORTED +#define PNG_READ_PACK_SUPPORTED +#define PNG_READ_QUANTIZE_SUPPORTED +#define PNG_READ_RGB_TO_GRAY_SUPPORTED +#define PNG_READ_SCALE_16_TO_8_SUPPORTED +#define PNG_READ_SHIFT_SUPPORTED +#define PNG_READ_STRIP_16_TO_8_SUPPORTED +#define PNG_READ_STRIP_ALPHA_SUPPORTED +#define PNG_READ_SUPPORTED +#define PNG_READ_SWAP_ALPHA_SUPPORTED +#define PNG_READ_SWAP_SUPPORTED +#define PNG_READ_TEXT_SUPPORTED +#define PNG_READ_TRANSFORMS_SUPPORTED +#define PNG_READ_UNKNOWN_CHUNKS_SUPPORTED +#define PNG_READ_USER_CHUNKS_SUPPORTED +#define PNG_READ_USER_TRANSFORM_SUPPORTED +#define PNG_READ_bKGD_SUPPORTED +#define PNG_READ_cHRM_SUPPORTED +#define PNG_READ_cICP_SUPPORTED +#define PNG_READ_cLLI_SUPPORTED +#define PNG_READ_eXIf_SUPPORTED +#define PNG_READ_gAMA_SUPPORTED +#define PNG_READ_hIST_SUPPORTED +#define PNG_READ_iCCP_SUPPORTED +#define PNG_READ_iTXt_SUPPORTED +#define PNG_READ_mDCV_SUPPORTED +#define PNG_READ_oFFs_SUPPORTED +#define PNG_READ_pCAL_SUPPORTED +#define PNG_READ_pHYs_SUPPORTED +#define PNG_READ_sBIT_SUPPORTED +#define PNG_READ_sCAL_SUPPORTED +#define PNG_READ_sPLT_SUPPORTED +#define PNG_READ_sRGB_SUPPORTED +#define PNG_READ_tEXt_SUPPORTED +#define PNG_READ_tIME_SUPPORTED +#define PNG_READ_tRNS_SUPPORTED +#define PNG_READ_zTXt_SUPPORTED +#define PNG_SAVE_INT_32_SUPPORTED +#define PNG_SAVE_UNKNOWN_CHUNKS_SUPPORTED +#define PNG_SEQUENTIAL_READ_SUPPORTED +#define PNG_SETJMP_SUPPORTED +#define PNG_SET_OPTION_SUPPORTED +#define PNG_SET_UNKNOWN_CHUNKS_SUPPORTED +#define PNG_SET_USER_LIMITS_SUPPORTED +#define PNG_SIMPLIFIED_READ_AFIRST_SUPPORTED +#define PNG_SIMPLIFIED_READ_BGR_SUPPORTED +#define PNG_SIMPLIFIED_READ_SUPPORTED +#define PNG_SIMPLIFIED_WRITE_AFIRST_SUPPORTED +#define PNG_SIMPLIFIED_WRITE_BGR_SUPPORTED +#define PNG_SIMPLIFIED_WRITE_STDIO_SUPPORTED +#define PNG_SIMPLIFIED_WRITE_SUPPORTED +#define PNG_STDIO_SUPPORTED +#define PNG_STORE_UNKNOWN_CHUNKS_SUPPORTED +#define PNG_TEXT_SUPPORTED +#define PNG_TIME_RFC1123_SUPPORTED +#define PNG_UNKNOWN_CHUNKS_SUPPORTED +#define PNG_USER_CHUNKS_SUPPORTED +#define PNG_USER_LIMITS_SUPPORTED +#define PNG_USER_MEM_SUPPORTED +#define PNG_USER_TRANSFORM_INFO_SUPPORTED +#define PNG_USER_TRANSFORM_PTR_SUPPORTED +#define PNG_WARNINGS_SUPPORTED +#define PNG_WRITE_16BIT_SUPPORTED +#define PNG_WRITE_ANCILLARY_CHUNKS_SUPPORTED +#define PNG_WRITE_BGR_SUPPORTED +#define PNG_WRITE_CHECK_FOR_INVALID_INDEX_SUPPORTED +#define PNG_WRITE_COMPRESSED_TEXT_SUPPORTED +#define PNG_WRITE_CUSTOMIZE_COMPRESSION_SUPPORTED +#define PNG_WRITE_CUSTOMIZE_ZTXT_COMPRESSION_SUPPORTED +#define PNG_WRITE_FILLER_SUPPORTED +#define PNG_WRITE_FILTER_SUPPORTED +#define PNG_WRITE_FLUSH_SUPPORTED +#define PNG_WRITE_GET_PALETTE_MAX_SUPPORTED +#define PNG_WRITE_INTERLACING_SUPPORTED +#define PNG_WRITE_INT_FUNCTIONS_SUPPORTED +#define PNG_WRITE_INVERT_ALPHA_SUPPORTED +#define PNG_WRITE_INVERT_SUPPORTED +#define PNG_WRITE_OPTIMIZE_CMF_SUPPORTED +#define PNG_WRITE_PACKSWAP_SUPPORTED +#define PNG_WRITE_PACK_SUPPORTED +#define PNG_WRITE_SHIFT_SUPPORTED +#define PNG_WRITE_SUPPORTED +#define PNG_WRITE_SWAP_ALPHA_SUPPORTED +#define PNG_WRITE_SWAP_SUPPORTED +#define PNG_WRITE_TEXT_SUPPORTED +#define PNG_WRITE_TRANSFORMS_SUPPORTED +#define PNG_WRITE_UNKNOWN_CHUNKS_SUPPORTED +#define PNG_WRITE_USER_TRANSFORM_SUPPORTED +#define PNG_WRITE_WEIGHTED_FILTER_SUPPORTED +#define PNG_WRITE_bKGD_SUPPORTED +#define PNG_WRITE_cHRM_SUPPORTED +#define PNG_WRITE_cICP_SUPPORTED +#define PNG_WRITE_cLLI_SUPPORTED +#define PNG_WRITE_eXIf_SUPPORTED +#define PNG_WRITE_gAMA_SUPPORTED +#define PNG_WRITE_hIST_SUPPORTED +#define PNG_WRITE_iCCP_SUPPORTED +#define PNG_WRITE_iTXt_SUPPORTED +#define PNG_WRITE_mDCV_SUPPORTED +#define PNG_WRITE_oFFs_SUPPORTED +#define PNG_WRITE_pCAL_SUPPORTED +#define PNG_WRITE_pHYs_SUPPORTED +#define PNG_WRITE_sBIT_SUPPORTED +#define PNG_WRITE_sCAL_SUPPORTED +#define PNG_WRITE_sPLT_SUPPORTED +#define PNG_WRITE_sRGB_SUPPORTED +#define PNG_WRITE_tEXt_SUPPORTED +#define PNG_WRITE_tIME_SUPPORTED +#define PNG_WRITE_tRNS_SUPPORTED +#define PNG_WRITE_zTXt_SUPPORTED +#define PNG_bKGD_SUPPORTED +#define PNG_cHRM_SUPPORTED +#define PNG_cICP_SUPPORTED +#define PNG_cLLI_SUPPORTED +#define PNG_eXIf_SUPPORTED +#define PNG_gAMA_SUPPORTED +#define PNG_hIST_SUPPORTED +#define PNG_iCCP_SUPPORTED +#define PNG_iTXt_SUPPORTED +#define PNG_mDCV_SUPPORTED +#define PNG_oFFs_SUPPORTED +#define PNG_pCAL_SUPPORTED +#define PNG_pHYs_SUPPORTED +#define PNG_sBIT_SUPPORTED +#define PNG_sCAL_SUPPORTED +#define PNG_sPLT_SUPPORTED +#define PNG_sRGB_SUPPORTED +#define PNG_tEXt_SUPPORTED +#define PNG_tIME_SUPPORTED +#define PNG_tRNS_SUPPORTED +#define PNG_zTXt_SUPPORTED +/* end of options */ +/* settings */ +#define PNG_API_RULE 0 +#define PNG_DEFAULT_READ_MACROS 1 +#define PNG_GAMMA_THRESHOLD_FIXED 5000 +#define PNG_IDAT_READ_SIZE PNG_ZBUF_SIZE +#define PNG_INFLATE_BUF_SIZE 1024 +#define PNG_LINKAGE_API extern +#define PNG_LINKAGE_CALLBACK extern +#define PNG_LINKAGE_DATA extern +#define PNG_LINKAGE_FUNCTION extern +#define PNG_MAX_GAMMA_8 11 +#define PNG_QUANTIZE_BLUE_BITS 5 +#define PNG_QUANTIZE_GREEN_BITS 5 +#define PNG_QUANTIZE_RED_BITS 5 +#define PNG_TEXT_Z_DEFAULT_COMPRESSION (-1) +#define PNG_TEXT_Z_DEFAULT_STRATEGY 0 +#define PNG_USER_CHUNK_CACHE_MAX 1000 +#define PNG_USER_CHUNK_MALLOC_MAX 8000000 +#define PNG_USER_HEIGHT_MAX 1000000 +#define PNG_USER_WIDTH_MAX 1000000 +#define PNG_ZBUF_SIZE 8192 +#define PNG_ZLIB_VERNUM 0x1310 +#define PNG_Z_DEFAULT_COMPRESSION (-1) +#define PNG_Z_DEFAULT_NOFILTER_STRATEGY 0 +#define PNG_Z_DEFAULT_STRATEGY 1 +#define PNG_sCAL_PRECISION 5 +#define PNG_sRGB_PROFILE_CHECKS 2 +/* end of settings */ +#endif /* PNGLCONF_H */ diff --git a/dependencies/linux64/include/zconf.h b/dependencies/linux64/include/zconf.h new file mode 100644 index 0000000..cf801d3 --- /dev/null +++ b/dependencies/linux64/include/zconf.h @@ -0,0 +1,545 @@ +/* zconf.h -- configuration of the zlib compression library + * Copyright (C) 1995-2024 Jean-loup Gailly, Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* @(#) $Id$ */ + +#ifndef ZCONF_H +#define ZCONF_H +/* #undef Z_PREFIX */ +#define Z_HAVE_UNISTD_H + +/* + * If you *really* need a unique prefix for all types and library functions, + * compile with -DZ_PREFIX. The "standard" zlib should be compiled without it. + * Even better than compiling with -DZ_PREFIX would be to use configure to set + * this permanently in zconf.h using "./configure --zprefix". + */ +#ifdef Z_PREFIX /* may be set to #if 1 by ./configure */ +# define Z_PREFIX_SET + +/* all linked symbols and init macros */ +# define _dist_code z__dist_code +# define _length_code z__length_code +# define _tr_align z__tr_align +# define _tr_flush_bits z__tr_flush_bits +# define _tr_flush_block z__tr_flush_block +# define _tr_init z__tr_init +# define _tr_stored_block z__tr_stored_block +# define _tr_tally z__tr_tally +# define adler32 z_adler32 +# define adler32_combine z_adler32_combine +# define adler32_combine64 z_adler32_combine64 +# define adler32_z z_adler32_z +# ifndef Z_SOLO +# define compress z_compress +# define compress2 z_compress2 +# define compressBound z_compressBound +# endif +# define crc32 z_crc32 +# define crc32_combine z_crc32_combine +# define crc32_combine64 z_crc32_combine64 +# define crc32_combine_gen z_crc32_combine_gen +# define crc32_combine_gen64 z_crc32_combine_gen64 +# define crc32_combine_op z_crc32_combine_op +# define crc32_z z_crc32_z +# define deflate z_deflate +# define deflateBound z_deflateBound +# define deflateCopy z_deflateCopy +# define deflateEnd z_deflateEnd +# define deflateGetDictionary z_deflateGetDictionary +# define deflateInit z_deflateInit +# define deflateInit2 z_deflateInit2 +# define deflateInit2_ z_deflateInit2_ +# define deflateInit_ z_deflateInit_ +# define deflateParams z_deflateParams +# define deflatePending z_deflatePending +# define deflatePrime z_deflatePrime +# define deflateReset z_deflateReset +# define deflateResetKeep z_deflateResetKeep +# define deflateSetDictionary z_deflateSetDictionary +# define deflateSetHeader z_deflateSetHeader +# define deflateTune z_deflateTune +# define deflate_copyright z_deflate_copyright +# define get_crc_table z_get_crc_table +# ifndef Z_SOLO +# define gz_error z_gz_error +# define gz_intmax z_gz_intmax +# define gz_strwinerror z_gz_strwinerror +# define gzbuffer z_gzbuffer +# define gzclearerr z_gzclearerr +# define gzclose z_gzclose +# define gzclose_r z_gzclose_r +# define gzclose_w z_gzclose_w +# define gzdirect z_gzdirect +# define gzdopen z_gzdopen +# define gzeof z_gzeof +# define gzerror z_gzerror +# define gzflush z_gzflush +# define gzfread z_gzfread +# define gzfwrite z_gzfwrite +# define gzgetc z_gzgetc +# define gzgetc_ z_gzgetc_ +# define gzgets z_gzgets +# define gzoffset z_gzoffset +# define gzoffset64 z_gzoffset64 +# define gzopen z_gzopen +# define gzopen64 z_gzopen64 +# ifdef _WIN32 +# define gzopen_w z_gzopen_w +# endif +# define gzprintf z_gzprintf +# define gzputc z_gzputc +# define gzputs z_gzputs +# define gzread z_gzread +# define gzrewind z_gzrewind +# define gzseek z_gzseek +# define gzseek64 z_gzseek64 +# define gzsetparams z_gzsetparams +# define gztell z_gztell +# define gztell64 z_gztell64 +# define gzungetc z_gzungetc +# define gzvprintf z_gzvprintf +# define gzwrite z_gzwrite +# endif +# define inflate z_inflate +# define inflateBack z_inflateBack +# define inflateBackEnd z_inflateBackEnd +# define inflateBackInit z_inflateBackInit +# define inflateBackInit_ z_inflateBackInit_ +# define inflateCodesUsed z_inflateCodesUsed +# define inflateCopy z_inflateCopy +# define inflateEnd z_inflateEnd +# define inflateGetDictionary z_inflateGetDictionary +# define inflateGetHeader z_inflateGetHeader +# define inflateInit z_inflateInit +# define inflateInit2 z_inflateInit2 +# define inflateInit2_ z_inflateInit2_ +# define inflateInit_ z_inflateInit_ +# define inflateMark z_inflateMark +# define inflatePrime z_inflatePrime +# define inflateReset z_inflateReset +# define inflateReset2 z_inflateReset2 +# define inflateResetKeep z_inflateResetKeep +# define inflateSetDictionary z_inflateSetDictionary +# define inflateSync z_inflateSync +# define inflateSyncPoint z_inflateSyncPoint +# define inflateUndermine z_inflateUndermine +# define inflateValidate z_inflateValidate +# define inflate_copyright z_inflate_copyright +# define inflate_fast z_inflate_fast +# define inflate_table z_inflate_table +# ifndef Z_SOLO +# define uncompress z_uncompress +# define uncompress2 z_uncompress2 +# endif +# define zError z_zError +# ifndef Z_SOLO +# define zcalloc z_zcalloc +# define zcfree z_zcfree +# endif +# define zlibCompileFlags z_zlibCompileFlags +# define zlibVersion z_zlibVersion + +/* all zlib typedefs in zlib.h and zconf.h */ +# define Byte z_Byte +# define Bytef z_Bytef +# define alloc_func z_alloc_func +# define charf z_charf +# define free_func z_free_func +# ifndef Z_SOLO +# define gzFile z_gzFile +# endif +# define gz_header z_gz_header +# define gz_headerp z_gz_headerp +# define in_func z_in_func +# define intf z_intf +# define out_func z_out_func +# define uInt z_uInt +# define uIntf z_uIntf +# define uLong z_uLong +# define uLongf z_uLongf +# define voidp z_voidp +# define voidpc z_voidpc +# define voidpf z_voidpf + +/* all zlib structs in zlib.h and zconf.h */ +# define gz_header_s z_gz_header_s +# define internal_state z_internal_state + +#endif + +#if defined(__MSDOS__) && !defined(MSDOS) +# define MSDOS +#endif +#if (defined(OS_2) || defined(__OS2__)) && !defined(OS2) +# define OS2 +#endif +#if defined(_WINDOWS) && !defined(WINDOWS) +# define WINDOWS +#endif +#if defined(_WIN32) || defined(_WIN32_WCE) || defined(__WIN32__) +# ifndef WIN32 +# define WIN32 +# endif +#endif +#if (defined(MSDOS) || defined(OS2) || defined(WINDOWS)) && !defined(WIN32) +# if !defined(__GNUC__) && !defined(__FLAT__) && !defined(__386__) +# ifndef SYS16BIT +# define SYS16BIT +# endif +# endif +#endif + +/* + * Compile with -DMAXSEG_64K if the alloc function cannot allocate more + * than 64k bytes at a time (needed on systems with 16-bit int). + */ +#ifdef SYS16BIT +# define MAXSEG_64K +#endif +#ifdef MSDOS +# define UNALIGNED_OK +#endif + +#ifdef __STDC_VERSION__ +# ifndef STDC +# define STDC +# endif +# if __STDC_VERSION__ >= 199901L +# ifndef STDC99 +# define STDC99 +# endif +# endif +#endif +#if !defined(STDC) && (defined(__STDC__) || defined(__cplusplus)) +# define STDC +#endif +#if !defined(STDC) && (defined(__GNUC__) || defined(__BORLANDC__)) +# define STDC +#endif +#if !defined(STDC) && (defined(MSDOS) || defined(WINDOWS) || defined(WIN32)) +# define STDC +#endif +#if !defined(STDC) && (defined(OS2) || defined(__HOS_AIX__)) +# define STDC +#endif + +#if defined(__OS400__) && !defined(STDC) /* iSeries (formerly AS/400). */ +# define STDC +#endif + +#ifndef STDC +# ifndef const /* cannot use !defined(STDC) && !defined(const) on Mac */ +# define const /* note: need a more gentle solution here */ +# endif +#endif + +#if defined(ZLIB_CONST) && !defined(z_const) +# define z_const const +#else +# define z_const +#endif + +#ifdef Z_SOLO +# ifdef _WIN64 + typedef unsigned long long z_size_t; +# else + typedef unsigned long z_size_t; +# endif +#else +# define z_longlong long long +# if defined(NO_SIZE_T) + typedef unsigned NO_SIZE_T z_size_t; +# elif defined(STDC) +# include + typedef size_t z_size_t; +# else + typedef unsigned long z_size_t; +# endif +# undef z_longlong +#endif + +/* Maximum value for memLevel in deflateInit2 */ +#ifndef MAX_MEM_LEVEL +# ifdef MAXSEG_64K +# define MAX_MEM_LEVEL 8 +# else +# define MAX_MEM_LEVEL 9 +# endif +#endif + +/* Maximum value for windowBits in deflateInit2 and inflateInit2. + * WARNING: reducing MAX_WBITS makes minigzip unable to extract .gz files + * created by gzip. (Files created by minigzip can still be extracted by + * gzip.) + */ +#ifndef MAX_WBITS +# define MAX_WBITS 15 /* 32K LZ77 window */ +#endif + +/* The memory requirements for deflate are (in bytes): + (1 << (windowBits+2)) + (1 << (memLevel+9)) + that is: 128K for windowBits=15 + 128K for memLevel = 8 (default values) + plus a few kilobytes for small objects. For example, if you want to reduce + the default memory requirements from 256K to 128K, compile with + make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7" + Of course this will generally degrade compression (there's no free lunch). + + The memory requirements for inflate are (in bytes) 1 << windowBits + that is, 32K for windowBits=15 (default value) plus about 7 kilobytes + for small objects. +*/ + + /* Type declarations */ + +#ifndef OF /* function prototypes */ +# ifdef STDC +# define OF(args) args +# else +# define OF(args) () +# endif +#endif + +/* The following definitions for FAR are needed only for MSDOS mixed + * model programming (small or medium model with some far allocations). + * This was tested only with MSC; for other MSDOS compilers you may have + * to define NO_MEMCPY in zutil.h. If you don't need the mixed model, + * just define FAR to be empty. + */ +#ifdef SYS16BIT +# if defined(M_I86SM) || defined(M_I86MM) + /* MSC small or medium model */ +# define SMALL_MEDIUM +# ifdef _MSC_VER +# define FAR _far +# else +# define FAR far +# endif +# endif +# if (defined(__SMALL__) || defined(__MEDIUM__)) + /* Turbo C small or medium model */ +# define SMALL_MEDIUM +# ifdef __BORLANDC__ +# define FAR _far +# else +# define FAR far +# endif +# endif +#endif + +#if defined(WINDOWS) || defined(WIN32) + /* If building or using zlib as a DLL, define ZLIB_DLL. + * This is not mandatory, but it offers a little performance increase. + */ +# ifdef ZLIB_DLL +# if defined(WIN32) && (!defined(__BORLANDC__) || (__BORLANDC__ >= 0x500)) +# ifdef ZLIB_INTERNAL +# define ZEXTERN extern __declspec(dllexport) +# else +# define ZEXTERN extern __declspec(dllimport) +# endif +# endif +# endif /* ZLIB_DLL */ + /* If building or using zlib with the WINAPI/WINAPIV calling convention, + * define ZLIB_WINAPI. + * Caution: the standard ZLIB1.DLL is NOT compiled using ZLIB_WINAPI. + */ +# ifdef ZLIB_WINAPI +# ifdef FAR +# undef FAR +# endif +# ifndef WIN32_LEAN_AND_MEAN +# define WIN32_LEAN_AND_MEAN +# endif +# include + /* No need for _export, use ZLIB.DEF instead. */ + /* For complete Windows compatibility, use WINAPI, not __stdcall. */ +# define ZEXPORT WINAPI +# ifdef WIN32 +# define ZEXPORTVA WINAPIV +# else +# define ZEXPORTVA FAR CDECL +# endif +# endif +#endif + +#if defined (__BEOS__) +# ifdef ZLIB_DLL +# ifdef ZLIB_INTERNAL +# define ZEXPORT __declspec(dllexport) +# define ZEXPORTVA __declspec(dllexport) +# else +# define ZEXPORT __declspec(dllimport) +# define ZEXPORTVA __declspec(dllimport) +# endif +# endif +#endif + +#ifndef ZEXTERN +# define ZEXTERN extern +#endif +#ifndef ZEXPORT +# define ZEXPORT +#endif +#ifndef ZEXPORTVA +# define ZEXPORTVA +#endif + +#ifndef FAR +# define FAR +#endif + +#if !defined(__MACTYPES__) +typedef unsigned char Byte; /* 8 bits */ +#endif +typedef unsigned int uInt; /* 16 bits or more */ +typedef unsigned long uLong; /* 32 bits or more */ + +#ifdef SMALL_MEDIUM + /* Borland C/C++ and some old MSC versions ignore FAR inside typedef */ +# define Bytef Byte FAR +#else + typedef Byte FAR Bytef; +#endif +typedef char FAR charf; +typedef int FAR intf; +typedef uInt FAR uIntf; +typedef uLong FAR uLongf; + +#ifdef STDC + typedef void const *voidpc; + typedef void FAR *voidpf; + typedef void *voidp; +#else + typedef Byte const *voidpc; + typedef Byte FAR *voidpf; + typedef Byte *voidp; +#endif + +#if !defined(Z_U4) && !defined(Z_SOLO) && defined(STDC) +# include +# if (UINT_MAX == 0xffffffffUL) +# define Z_U4 unsigned +# elif (ULONG_MAX == 0xffffffffUL) +# define Z_U4 unsigned long +# elif (USHRT_MAX == 0xffffffffUL) +# define Z_U4 unsigned short +# endif +#endif + +#ifdef Z_U4 + typedef Z_U4 z_crc_t; +#else + typedef unsigned long z_crc_t; +#endif + +#ifdef HAVE_UNISTD_H /* may be set to #if 1 by ./configure */ +# define Z_HAVE_UNISTD_H +#endif + +#ifdef HAVE_STDARG_H /* may be set to #if 1 by ./configure */ +# define Z_HAVE_STDARG_H +#endif + +#ifdef STDC +# ifndef Z_SOLO +# include /* for off_t */ +# endif +#endif + +#if defined(STDC) || defined(Z_HAVE_STDARG_H) +# ifndef Z_SOLO +# include /* for va_list */ +# endif +#endif + +#ifdef _WIN32 +# ifndef Z_SOLO +# include /* for wchar_t */ +# endif +#endif + +/* a little trick to accommodate both "#define _LARGEFILE64_SOURCE" and + * "#define _LARGEFILE64_SOURCE 1" as requesting 64-bit operations, (even + * though the former does not conform to the LFS document), but considering + * both "#undef _LARGEFILE64_SOURCE" and "#define _LARGEFILE64_SOURCE 0" as + * equivalently requesting no 64-bit operations + */ +#if defined(_LARGEFILE64_SOURCE) && -_LARGEFILE64_SOURCE - -1 == 1 +# undef _LARGEFILE64_SOURCE +#endif + +#ifndef Z_HAVE_UNISTD_H +# ifdef __WATCOMC__ +# define Z_HAVE_UNISTD_H +# endif +#endif +#ifndef Z_HAVE_UNISTD_H +# if defined(_LARGEFILE64_SOURCE) && !defined(_WIN32) +# define Z_HAVE_UNISTD_H +# endif +#endif +#ifndef Z_SOLO +# if defined(Z_HAVE_UNISTD_H) +# include /* for SEEK_*, off_t, and _LFS64_LARGEFILE */ +# ifdef VMS +# include /* for off_t */ +# endif +# ifndef z_off_t +# define z_off_t off_t +# endif +# endif +#endif + +#if defined(_LFS64_LARGEFILE) && _LFS64_LARGEFILE-0 +# define Z_LFS64 +#endif + +#if defined(_LARGEFILE64_SOURCE) && defined(Z_LFS64) +# define Z_LARGE64 +#endif + +#if defined(_FILE_OFFSET_BITS) && _FILE_OFFSET_BITS-0 == 64 && defined(Z_LFS64) +# define Z_WANT64 +#endif + +#if !defined(SEEK_SET) && !defined(Z_SOLO) +# define SEEK_SET 0 /* Seek from beginning of file. */ +# define SEEK_CUR 1 /* Seek from current position. */ +# define SEEK_END 2 /* Set file pointer to EOF plus "offset" */ +#endif + +#ifndef z_off_t +# define z_off_t long +#endif + +#if !defined(_WIN32) && defined(Z_LARGE64) +# define z_off64_t off64_t +#else +# if defined(_WIN32) && !defined(__GNUC__) +# define z_off64_t __int64 +# else +# define z_off64_t z_off_t +# endif +#endif + +/* MVS linker does not support external names larger than 8 bytes */ +#if defined(__MVS__) + #pragma map(deflateInit_,"DEIN") + #pragma map(deflateInit2_,"DEIN2") + #pragma map(deflateEnd,"DEEND") + #pragma map(deflateBound,"DEBND") + #pragma map(inflateInit_,"ININ") + #pragma map(inflateInit2_,"ININ2") + #pragma map(inflateEnd,"INEND") + #pragma map(inflateSync,"INSY") + #pragma map(inflateSetDictionary,"INSEDI") + #pragma map(compressBound,"CMBND") + #pragma map(inflate_table,"INTABL") + #pragma map(inflate_fast,"INFA") + #pragma map(inflate_copyright,"INCOPY") +#endif + +#endif /* ZCONF_H */ diff --git a/dependencies/linux64/include/zdict.h b/dependencies/linux64/include/zdict.h new file mode 100644 index 0000000..599b793 --- /dev/null +++ b/dependencies/linux64/include/zdict.h @@ -0,0 +1,481 @@ +/* + * Copyright (c) Meta Platforms, Inc. and affiliates. + * All rights reserved. + * + * This source code is licensed under both the BSD-style license (found in the + * LICENSE file in the root directory of this source tree) and the GPLv2 (found + * in the COPYING file in the root directory of this source tree). + * You may select, at your option, one of the above-listed licenses. + */ + +#ifndef ZSTD_ZDICT_H +#define ZSTD_ZDICT_H + + +/*====== Dependencies ======*/ +#include /* size_t */ + +#if defined (__cplusplus) +extern "C" { +#endif + +/* ===== ZDICTLIB_API : control library symbols visibility ===== */ +#ifndef ZDICTLIB_VISIBLE + /* Backwards compatibility with old macro name */ +# ifdef ZDICTLIB_VISIBILITY +# define ZDICTLIB_VISIBLE ZDICTLIB_VISIBILITY +# elif defined(__GNUC__) && (__GNUC__ >= 4) && !defined(__MINGW32__) +# define ZDICTLIB_VISIBLE __attribute__ ((visibility ("default"))) +# else +# define ZDICTLIB_VISIBLE +# endif +#endif + +#ifndef ZDICTLIB_HIDDEN +# if defined(__GNUC__) && (__GNUC__ >= 4) && !defined(__MINGW32__) +# define ZDICTLIB_HIDDEN __attribute__ ((visibility ("hidden"))) +# else +# define ZDICTLIB_HIDDEN +# endif +#endif + +#if defined(ZSTD_DLL_EXPORT) && (ZSTD_DLL_EXPORT==1) +# define ZDICTLIB_API __declspec(dllexport) ZDICTLIB_VISIBLE +#elif defined(ZSTD_DLL_IMPORT) && (ZSTD_DLL_IMPORT==1) +# define ZDICTLIB_API __declspec(dllimport) ZDICTLIB_VISIBLE /* It isn't required but allows to generate better code, saving a function pointer load from the IAT and an indirect jump.*/ +#else +# define ZDICTLIB_API ZDICTLIB_VISIBLE +#endif + +/******************************************************************************* + * Zstd dictionary builder + * + * FAQ + * === + * Why should I use a dictionary? + * ------------------------------ + * + * Zstd can use dictionaries to improve compression ratio of small data. + * Traditionally small files don't compress well because there is very little + * repetition in a single sample, since it is small. But, if you are compressing + * many similar files, like a bunch of JSON records that share the same + * structure, you can train a dictionary on ahead of time on some samples of + * these files. Then, zstd can use the dictionary to find repetitions that are + * present across samples. This can vastly improve compression ratio. + * + * When is a dictionary useful? + * ---------------------------- + * + * Dictionaries are useful when compressing many small files that are similar. + * The larger a file is, the less benefit a dictionary will have. Generally, + * we don't expect dictionary compression to be effective past 100KB. And the + * smaller a file is, the more we would expect the dictionary to help. + * + * How do I use a dictionary? + * -------------------------- + * + * Simply pass the dictionary to the zstd compressor with + * `ZSTD_CCtx_loadDictionary()`. The same dictionary must then be passed to + * the decompressor, using `ZSTD_DCtx_loadDictionary()`. There are other + * more advanced functions that allow selecting some options, see zstd.h for + * complete documentation. + * + * What is a zstd dictionary? + * -------------------------- + * + * A zstd dictionary has two pieces: Its header, and its content. The header + * contains a magic number, the dictionary ID, and entropy tables. These + * entropy tables allow zstd to save on header costs in the compressed file, + * which really matters for small data. The content is just bytes, which are + * repeated content that is common across many samples. + * + * What is a raw content dictionary? + * --------------------------------- + * + * A raw content dictionary is just bytes. It doesn't have a zstd dictionary + * header, a dictionary ID, or entropy tables. Any buffer is a valid raw + * content dictionary. + * + * How do I train a dictionary? + * ---------------------------- + * + * Gather samples from your use case. These samples should be similar to each + * other. If you have several use cases, you could try to train one dictionary + * per use case. + * + * Pass those samples to `ZDICT_trainFromBuffer()` and that will train your + * dictionary. There are a few advanced versions of this function, but this + * is a great starting point. If you want to further tune your dictionary + * you could try `ZDICT_optimizeTrainFromBuffer_cover()`. If that is too slow + * you can try `ZDICT_optimizeTrainFromBuffer_fastCover()`. + * + * If the dictionary training function fails, that is likely because you + * either passed too few samples, or a dictionary would not be effective + * for your data. Look at the messages that the dictionary trainer printed, + * if it doesn't say too few samples, then a dictionary would not be effective. + * + * How large should my dictionary be? + * ---------------------------------- + * + * A reasonable dictionary size, the `dictBufferCapacity`, is about 100KB. + * The zstd CLI defaults to a 110KB dictionary. You likely don't need a + * dictionary larger than that. But, most use cases can get away with a + * smaller dictionary. The advanced dictionary builders can automatically + * shrink the dictionary for you, and select the smallest size that doesn't + * hurt compression ratio too much. See the `shrinkDict` parameter. + * A smaller dictionary can save memory, and potentially speed up + * compression. + * + * How many samples should I provide to the dictionary builder? + * ------------------------------------------------------------ + * + * We generally recommend passing ~100x the size of the dictionary + * in samples. A few thousand should suffice. Having too few samples + * can hurt the dictionaries effectiveness. Having more samples will + * only improve the dictionaries effectiveness. But having too many + * samples can slow down the dictionary builder. + * + * How do I determine if a dictionary will be effective? + * ----------------------------------------------------- + * + * Simply train a dictionary and try it out. You can use zstd's built in + * benchmarking tool to test the dictionary effectiveness. + * + * # Benchmark levels 1-3 without a dictionary + * zstd -b1e3 -r /path/to/my/files + * # Benchmark levels 1-3 with a dictionary + * zstd -b1e3 -r /path/to/my/files -D /path/to/my/dictionary + * + * When should I retrain a dictionary? + * ----------------------------------- + * + * You should retrain a dictionary when its effectiveness drops. Dictionary + * effectiveness drops as the data you are compressing changes. Generally, we do + * expect dictionaries to "decay" over time, as your data changes, but the rate + * at which they decay depends on your use case. Internally, we regularly + * retrain dictionaries, and if the new dictionary performs significantly + * better than the old dictionary, we will ship the new dictionary. + * + * I have a raw content dictionary, how do I turn it into a zstd dictionary? + * ------------------------------------------------------------------------- + * + * If you have a raw content dictionary, e.g. by manually constructing it, or + * using a third-party dictionary builder, you can turn it into a zstd + * dictionary by using `ZDICT_finalizeDictionary()`. You'll also have to + * provide some samples of the data. It will add the zstd header to the + * raw content, which contains a dictionary ID and entropy tables, which + * will improve compression ratio, and allow zstd to write the dictionary ID + * into the frame, if you so choose. + * + * Do I have to use zstd's dictionary builder? + * ------------------------------------------- + * + * No! You can construct dictionary content however you please, it is just + * bytes. It will always be valid as a raw content dictionary. If you want + * a zstd dictionary, which can improve compression ratio, use + * `ZDICT_finalizeDictionary()`. + * + * What is the attack surface of a zstd dictionary? + * ------------------------------------------------ + * + * Zstd is heavily fuzz tested, including loading fuzzed dictionaries, so + * zstd should never crash, or access out-of-bounds memory no matter what + * the dictionary is. However, if an attacker can control the dictionary + * during decompression, they can cause zstd to generate arbitrary bytes, + * just like if they controlled the compressed data. + * + ******************************************************************************/ + + +/*! ZDICT_trainFromBuffer(): + * Train a dictionary from an array of samples. + * Redirect towards ZDICT_optimizeTrainFromBuffer_fastCover() single-threaded, with d=8, steps=4, + * f=20, and accel=1. + * Samples must be stored concatenated in a single flat buffer `samplesBuffer`, + * supplied with an array of sizes `samplesSizes`, providing the size of each sample, in order. + * The resulting dictionary will be saved into `dictBuffer`. + * @return: size of dictionary stored into `dictBuffer` (<= `dictBufferCapacity`) + * or an error code, which can be tested with ZDICT_isError(). + * Note: Dictionary training will fail if there are not enough samples to construct a + * dictionary, or if most of the samples are too small (< 8 bytes being the lower limit). + * If dictionary training fails, you should use zstd without a dictionary, as the dictionary + * would've been ineffective anyways. If you believe your samples would benefit from a dictionary + * please open an issue with details, and we can look into it. + * Note: ZDICT_trainFromBuffer()'s memory usage is about 6 MB. + * Tips: In general, a reasonable dictionary has a size of ~ 100 KB. + * It's possible to select smaller or larger size, just by specifying `dictBufferCapacity`. + * In general, it's recommended to provide a few thousands samples, though this can vary a lot. + * It's recommended that total size of all samples be about ~x100 times the target size of dictionary. + */ +ZDICTLIB_API size_t ZDICT_trainFromBuffer(void* dictBuffer, size_t dictBufferCapacity, + const void* samplesBuffer, + const size_t* samplesSizes, unsigned nbSamples); + +typedef struct { + int compressionLevel; /**< optimize for a specific zstd compression level; 0 means default */ + unsigned notificationLevel; /**< Write log to stderr; 0 = none (default); 1 = errors; 2 = progression; 3 = details; 4 = debug; */ + unsigned dictID; /**< force dictID value; 0 means auto mode (32-bits random value) + * NOTE: The zstd format reserves some dictionary IDs for future use. + * You may use them in private settings, but be warned that they + * may be used by zstd in a public dictionary registry in the future. + * These dictionary IDs are: + * - low range : <= 32767 + * - high range : >= (2^31) + */ +} ZDICT_params_t; + +/*! ZDICT_finalizeDictionary(): + * Given a custom content as a basis for dictionary, and a set of samples, + * finalize dictionary by adding headers and statistics according to the zstd + * dictionary format. + * + * Samples must be stored concatenated in a flat buffer `samplesBuffer`, + * supplied with an array of sizes `samplesSizes`, providing the size of each + * sample in order. The samples are used to construct the statistics, so they + * should be representative of what you will compress with this dictionary. + * + * The compression level can be set in `parameters`. You should pass the + * compression level you expect to use in production. The statistics for each + * compression level differ, so tuning the dictionary for the compression level + * can help quite a bit. + * + * You can set an explicit dictionary ID in `parameters`, or allow us to pick + * a random dictionary ID for you, but we can't guarantee no collisions. + * + * The dstDictBuffer and the dictContent may overlap, and the content will be + * appended to the end of the header. If the header + the content doesn't fit in + * maxDictSize the beginning of the content is truncated to make room, since it + * is presumed that the most profitable content is at the end of the dictionary, + * since that is the cheapest to reference. + * + * `maxDictSize` must be >= max(dictContentSize, ZDICT_DICTSIZE_MIN). + * + * @return: size of dictionary stored into `dstDictBuffer` (<= `maxDictSize`), + * or an error code, which can be tested by ZDICT_isError(). + * Note: ZDICT_finalizeDictionary() will push notifications into stderr if + * instructed to, using notificationLevel>0. + * NOTE: This function currently may fail in several edge cases including: + * * Not enough samples + * * Samples are uncompressible + * * Samples are all exactly the same + */ +ZDICTLIB_API size_t ZDICT_finalizeDictionary(void* dstDictBuffer, size_t maxDictSize, + const void* dictContent, size_t dictContentSize, + const void* samplesBuffer, const size_t* samplesSizes, unsigned nbSamples, + ZDICT_params_t parameters); + + +/*====== Helper functions ======*/ +ZDICTLIB_API unsigned ZDICT_getDictID(const void* dictBuffer, size_t dictSize); /**< extracts dictID; @return zero if error (not a valid dictionary) */ +ZDICTLIB_API size_t ZDICT_getDictHeaderSize(const void* dictBuffer, size_t dictSize); /* returns dict header size; returns a ZSTD error code on failure */ +ZDICTLIB_API unsigned ZDICT_isError(size_t errorCode); +ZDICTLIB_API const char* ZDICT_getErrorName(size_t errorCode); + +#if defined (__cplusplus) +} +#endif + +#endif /* ZSTD_ZDICT_H */ + +#if defined(ZDICT_STATIC_LINKING_ONLY) && !defined(ZSTD_ZDICT_H_STATIC) +#define ZSTD_ZDICT_H_STATIC + +#if defined (__cplusplus) +extern "C" { +#endif + +/* This can be overridden externally to hide static symbols. */ +#ifndef ZDICTLIB_STATIC_API +# if defined(ZSTD_DLL_EXPORT) && (ZSTD_DLL_EXPORT==1) +# define ZDICTLIB_STATIC_API __declspec(dllexport) ZDICTLIB_VISIBLE +# elif defined(ZSTD_DLL_IMPORT) && (ZSTD_DLL_IMPORT==1) +# define ZDICTLIB_STATIC_API __declspec(dllimport) ZDICTLIB_VISIBLE +# else +# define ZDICTLIB_STATIC_API ZDICTLIB_VISIBLE +# endif +#endif + +/* ==================================================================================== + * The definitions in this section are considered experimental. + * They should never be used with a dynamic library, as they may change in the future. + * They are provided for advanced usages. + * Use them only in association with static linking. + * ==================================================================================== */ + +#define ZDICT_DICTSIZE_MIN 256 +/* Deprecated: Remove in v1.6.0 */ +#define ZDICT_CONTENTSIZE_MIN 128 + +/*! ZDICT_cover_params_t: + * k and d are the only required parameters. + * For others, value 0 means default. + */ +typedef struct { + unsigned k; /* Segment size : constraint: 0 < k : Reasonable range [16, 2048+] */ + unsigned d; /* dmer size : constraint: 0 < d <= k : Reasonable range [6, 16] */ + unsigned steps; /* Number of steps : Only used for optimization : 0 means default (40) : Higher means more parameters checked */ + unsigned nbThreads; /* Number of threads : constraint: 0 < nbThreads : 1 means single-threaded : Only used for optimization : Ignored if ZSTD_MULTITHREAD is not defined */ + double splitPoint; /* Percentage of samples used for training: Only used for optimization : the first nbSamples * splitPoint samples will be used to training, the last nbSamples * (1 - splitPoint) samples will be used for testing, 0 means default (1.0), 1.0 when all samples are used for both training and testing */ + unsigned shrinkDict; /* Train dictionaries to shrink in size starting from the minimum size and selects the smallest dictionary that is shrinkDictMaxRegression% worse than the largest dictionary. 0 means no shrinking and 1 means shrinking */ + unsigned shrinkDictMaxRegression; /* Sets shrinkDictMaxRegression so that a smaller dictionary can be at worse shrinkDictMaxRegression% worse than the max dict size dictionary. */ + ZDICT_params_t zParams; +} ZDICT_cover_params_t; + +typedef struct { + unsigned k; /* Segment size : constraint: 0 < k : Reasonable range [16, 2048+] */ + unsigned d; /* dmer size : constraint: 0 < d <= k : Reasonable range [6, 16] */ + unsigned f; /* log of size of frequency array : constraint: 0 < f <= 31 : 1 means default(20)*/ + unsigned steps; /* Number of steps : Only used for optimization : 0 means default (40) : Higher means more parameters checked */ + unsigned nbThreads; /* Number of threads : constraint: 0 < nbThreads : 1 means single-threaded : Only used for optimization : Ignored if ZSTD_MULTITHREAD is not defined */ + double splitPoint; /* Percentage of samples used for training: Only used for optimization : the first nbSamples * splitPoint samples will be used to training, the last nbSamples * (1 - splitPoint) samples will be used for testing, 0 means default (0.75), 1.0 when all samples are used for both training and testing */ + unsigned accel; /* Acceleration level: constraint: 0 < accel <= 10, higher means faster and less accurate, 0 means default(1) */ + unsigned shrinkDict; /* Train dictionaries to shrink in size starting from the minimum size and selects the smallest dictionary that is shrinkDictMaxRegression% worse than the largest dictionary. 0 means no shrinking and 1 means shrinking */ + unsigned shrinkDictMaxRegression; /* Sets shrinkDictMaxRegression so that a smaller dictionary can be at worse shrinkDictMaxRegression% worse than the max dict size dictionary. */ + + ZDICT_params_t zParams; +} ZDICT_fastCover_params_t; + +/*! ZDICT_trainFromBuffer_cover(): + * Train a dictionary from an array of samples using the COVER algorithm. + * Samples must be stored concatenated in a single flat buffer `samplesBuffer`, + * supplied with an array of sizes `samplesSizes`, providing the size of each sample, in order. + * The resulting dictionary will be saved into `dictBuffer`. + * @return: size of dictionary stored into `dictBuffer` (<= `dictBufferCapacity`) + * or an error code, which can be tested with ZDICT_isError(). + * See ZDICT_trainFromBuffer() for details on failure modes. + * Note: ZDICT_trainFromBuffer_cover() requires about 9 bytes of memory for each input byte. + * Tips: In general, a reasonable dictionary has a size of ~ 100 KB. + * It's possible to select smaller or larger size, just by specifying `dictBufferCapacity`. + * In general, it's recommended to provide a few thousands samples, though this can vary a lot. + * It's recommended that total size of all samples be about ~x100 times the target size of dictionary. + */ +ZDICTLIB_STATIC_API size_t ZDICT_trainFromBuffer_cover( + void *dictBuffer, size_t dictBufferCapacity, + const void *samplesBuffer, const size_t *samplesSizes, unsigned nbSamples, + ZDICT_cover_params_t parameters); + +/*! ZDICT_optimizeTrainFromBuffer_cover(): + * The same requirements as above hold for all the parameters except `parameters`. + * This function tries many parameter combinations and picks the best parameters. + * `*parameters` is filled with the best parameters found, + * dictionary constructed with those parameters is stored in `dictBuffer`. + * + * All of the parameters d, k, steps are optional. + * If d is non-zero then we don't check multiple values of d, otherwise we check d = {6, 8}. + * if steps is zero it defaults to its default value. + * If k is non-zero then we don't check multiple values of k, otherwise we check steps values in [50, 2000]. + * + * @return: size of dictionary stored into `dictBuffer` (<= `dictBufferCapacity`) + * or an error code, which can be tested with ZDICT_isError(). + * On success `*parameters` contains the parameters selected. + * See ZDICT_trainFromBuffer() for details on failure modes. + * Note: ZDICT_optimizeTrainFromBuffer_cover() requires about 8 bytes of memory for each input byte and additionally another 5 bytes of memory for each byte of memory for each thread. + */ +ZDICTLIB_STATIC_API size_t ZDICT_optimizeTrainFromBuffer_cover( + void* dictBuffer, size_t dictBufferCapacity, + const void* samplesBuffer, const size_t* samplesSizes, unsigned nbSamples, + ZDICT_cover_params_t* parameters); + +/*! ZDICT_trainFromBuffer_fastCover(): + * Train a dictionary from an array of samples using a modified version of COVER algorithm. + * Samples must be stored concatenated in a single flat buffer `samplesBuffer`, + * supplied with an array of sizes `samplesSizes`, providing the size of each sample, in order. + * d and k are required. + * All other parameters are optional, will use default values if not provided + * The resulting dictionary will be saved into `dictBuffer`. + * @return: size of dictionary stored into `dictBuffer` (<= `dictBufferCapacity`) + * or an error code, which can be tested with ZDICT_isError(). + * See ZDICT_trainFromBuffer() for details on failure modes. + * Note: ZDICT_trainFromBuffer_fastCover() requires 6 * 2^f bytes of memory. + * Tips: In general, a reasonable dictionary has a size of ~ 100 KB. + * It's possible to select smaller or larger size, just by specifying `dictBufferCapacity`. + * In general, it's recommended to provide a few thousands samples, though this can vary a lot. + * It's recommended that total size of all samples be about ~x100 times the target size of dictionary. + */ +ZDICTLIB_STATIC_API size_t ZDICT_trainFromBuffer_fastCover(void *dictBuffer, + size_t dictBufferCapacity, const void *samplesBuffer, + const size_t *samplesSizes, unsigned nbSamples, + ZDICT_fastCover_params_t parameters); + +/*! ZDICT_optimizeTrainFromBuffer_fastCover(): + * The same requirements as above hold for all the parameters except `parameters`. + * This function tries many parameter combinations (specifically, k and d combinations) + * and picks the best parameters. `*parameters` is filled with the best parameters found, + * dictionary constructed with those parameters is stored in `dictBuffer`. + * All of the parameters d, k, steps, f, and accel are optional. + * If d is non-zero then we don't check multiple values of d, otherwise we check d = {6, 8}. + * if steps is zero it defaults to its default value. + * If k is non-zero then we don't check multiple values of k, otherwise we check steps values in [50, 2000]. + * If f is zero, default value of 20 is used. + * If accel is zero, default value of 1 is used. + * + * @return: size of dictionary stored into `dictBuffer` (<= `dictBufferCapacity`) + * or an error code, which can be tested with ZDICT_isError(). + * On success `*parameters` contains the parameters selected. + * See ZDICT_trainFromBuffer() for details on failure modes. + * Note: ZDICT_optimizeTrainFromBuffer_fastCover() requires about 6 * 2^f bytes of memory for each thread. + */ +ZDICTLIB_STATIC_API size_t ZDICT_optimizeTrainFromBuffer_fastCover(void* dictBuffer, + size_t dictBufferCapacity, const void* samplesBuffer, + const size_t* samplesSizes, unsigned nbSamples, + ZDICT_fastCover_params_t* parameters); + +typedef struct { + unsigned selectivityLevel; /* 0 means default; larger => select more => larger dictionary */ + ZDICT_params_t zParams; +} ZDICT_legacy_params_t; + +/*! ZDICT_trainFromBuffer_legacy(): + * Train a dictionary from an array of samples. + * Samples must be stored concatenated in a single flat buffer `samplesBuffer`, + * supplied with an array of sizes `samplesSizes`, providing the size of each sample, in order. + * The resulting dictionary will be saved into `dictBuffer`. + * `parameters` is optional and can be provided with values set to 0 to mean "default". + * @return: size of dictionary stored into `dictBuffer` (<= `dictBufferCapacity`) + * or an error code, which can be tested with ZDICT_isError(). + * See ZDICT_trainFromBuffer() for details on failure modes. + * Tips: In general, a reasonable dictionary has a size of ~ 100 KB. + * It's possible to select smaller or larger size, just by specifying `dictBufferCapacity`. + * In general, it's recommended to provide a few thousands samples, though this can vary a lot. + * It's recommended that total size of all samples be about ~x100 times the target size of dictionary. + * Note: ZDICT_trainFromBuffer_legacy() will send notifications into stderr if instructed to, using notificationLevel>0. + */ +ZDICTLIB_STATIC_API size_t ZDICT_trainFromBuffer_legacy( + void* dictBuffer, size_t dictBufferCapacity, + const void* samplesBuffer, const size_t* samplesSizes, unsigned nbSamples, + ZDICT_legacy_params_t parameters); + + +/* Deprecation warnings */ +/* It is generally possible to disable deprecation warnings from compiler, + for example with -Wno-deprecated-declarations for gcc + or _CRT_SECURE_NO_WARNINGS in Visual. + Otherwise, it's also possible to manually define ZDICT_DISABLE_DEPRECATE_WARNINGS */ +#ifdef ZDICT_DISABLE_DEPRECATE_WARNINGS +# define ZDICT_DEPRECATED(message) /* disable deprecation warnings */ +#else +# define ZDICT_GCC_VERSION (__GNUC__ * 100 + __GNUC_MINOR__) +# if defined (__cplusplus) && (__cplusplus >= 201402) /* C++14 or greater */ +# define ZDICT_DEPRECATED(message) [[deprecated(message)]] +# elif defined(__clang__) || (ZDICT_GCC_VERSION >= 405) +# define ZDICT_DEPRECATED(message) __attribute__((deprecated(message))) +# elif (ZDICT_GCC_VERSION >= 301) +# define ZDICT_DEPRECATED(message) __attribute__((deprecated)) +# elif defined(_MSC_VER) +# define ZDICT_DEPRECATED(message) __declspec(deprecated(message)) +# else +# pragma message("WARNING: You need to implement ZDICT_DEPRECATED for this compiler") +# define ZDICT_DEPRECATED(message) +# endif +#endif /* ZDICT_DISABLE_DEPRECATE_WARNINGS */ + +ZDICT_DEPRECATED("use ZDICT_finalizeDictionary() instead") +ZDICTLIB_STATIC_API +size_t ZDICT_addEntropyTablesFromBuffer(void* dictBuffer, size_t dictContentSize, size_t dictBufferCapacity, + const void* samplesBuffer, const size_t* samplesSizes, unsigned nbSamples); + +#if defined (__cplusplus) +} +#endif + +#endif /* ZSTD_ZDICT_H_STATIC */ diff --git a/dependencies/linux64/include/zlib.h b/dependencies/linux64/include/zlib.h new file mode 100644 index 0000000..8d4b932 --- /dev/null +++ b/dependencies/linux64/include/zlib.h @@ -0,0 +1,1938 @@ +/* zlib.h -- interface of the 'zlib' general purpose compression library + version 1.3.1, January 22nd, 2024 + + Copyright (C) 1995-2024 Jean-loup Gailly and Mark Adler + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. + + Jean-loup Gailly Mark Adler + jloup@gzip.org madler@alumni.caltech.edu + + + The data format used by the zlib library is described by RFCs (Request for + Comments) 1950 to 1952 in the files http://tools.ietf.org/html/rfc1950 + (zlib format), rfc1951 (deflate format) and rfc1952 (gzip format). +*/ + +#ifndef ZLIB_H +#define ZLIB_H + +#include "zconf.h" + +#ifdef __cplusplus +extern "C" { +#endif + +#define ZLIB_VERSION "1.3.1" +#define ZLIB_VERNUM 0x1310 +#define ZLIB_VER_MAJOR 1 +#define ZLIB_VER_MINOR 3 +#define ZLIB_VER_REVISION 1 +#define ZLIB_VER_SUBREVISION 0 + +/* + The 'zlib' compression library provides in-memory compression and + decompression functions, including integrity checks of the uncompressed data. + This version of the library supports only one compression method (deflation) + but other algorithms will be added later and will have the same stream + interface. + + Compression can be done in a single step if the buffers are large enough, + or can be done by repeated calls of the compression function. In the latter + case, the application must provide more input and/or consume the output + (providing more output space) before each call. + + The compressed data format used by default by the in-memory functions is + the zlib format, which is a zlib wrapper documented in RFC 1950, wrapped + around a deflate stream, which is itself documented in RFC 1951. + + The library also supports reading and writing files in gzip (.gz) format + with an interface similar to that of stdio using the functions that start + with "gz". The gzip format is different from the zlib format. gzip is a + gzip wrapper, documented in RFC 1952, wrapped around a deflate stream. + + This library can optionally read and write gzip and raw deflate streams in + memory as well. + + The zlib format was designed to be compact and fast for use in memory + and on communications channels. The gzip format was designed for single- + file compression on file systems, has a larger header than zlib to maintain + directory information, and uses a different, slower check method than zlib. + + The library does not install any signal handler. The decoder checks + the consistency of the compressed data, so the library should never crash + even in the case of corrupted input. +*/ + +typedef voidpf (*alloc_func)(voidpf opaque, uInt items, uInt size); +typedef void (*free_func)(voidpf opaque, voidpf address); + +struct internal_state; + +typedef struct z_stream_s { + z_const Bytef *next_in; /* next input byte */ + uInt avail_in; /* number of bytes available at next_in */ + uLong total_in; /* total number of input bytes read so far */ + + Bytef *next_out; /* next output byte will go here */ + uInt avail_out; /* remaining free space at next_out */ + uLong total_out; /* total number of bytes output so far */ + + z_const char *msg; /* last error message, NULL if no error */ + struct internal_state FAR *state; /* not visible by applications */ + + alloc_func zalloc; /* used to allocate the internal state */ + free_func zfree; /* used to free the internal state */ + voidpf opaque; /* private data object passed to zalloc and zfree */ + + int data_type; /* best guess about the data type: binary or text + for deflate, or the decoding state for inflate */ + uLong adler; /* Adler-32 or CRC-32 value of the uncompressed data */ + uLong reserved; /* reserved for future use */ +} z_stream; + +typedef z_stream FAR *z_streamp; + +/* + gzip header information passed to and from zlib routines. See RFC 1952 + for more details on the meanings of these fields. +*/ +typedef struct gz_header_s { + int text; /* true if compressed data believed to be text */ + uLong time; /* modification time */ + int xflags; /* extra flags (not used when writing a gzip file) */ + int os; /* operating system */ + Bytef *extra; /* pointer to extra field or Z_NULL if none */ + uInt extra_len; /* extra field length (valid if extra != Z_NULL) */ + uInt extra_max; /* space at extra (only when reading header) */ + Bytef *name; /* pointer to zero-terminated file name or Z_NULL */ + uInt name_max; /* space at name (only when reading header) */ + Bytef *comment; /* pointer to zero-terminated comment or Z_NULL */ + uInt comm_max; /* space at comment (only when reading header) */ + int hcrc; /* true if there was or will be a header crc */ + int done; /* true when done reading gzip header (not used + when writing a gzip file) */ +} gz_header; + +typedef gz_header FAR *gz_headerp; + +/* + The application must update next_in and avail_in when avail_in has dropped + to zero. It must update next_out and avail_out when avail_out has dropped + to zero. The application must initialize zalloc, zfree and opaque before + calling the init function. All other fields are set by the compression + library and must not be updated by the application. + + The opaque value provided by the application will be passed as the first + parameter for calls of zalloc and zfree. This can be useful for custom + memory management. The compression library attaches no meaning to the + opaque value. + + zalloc must return Z_NULL if there is not enough memory for the object. + If zlib is used in a multi-threaded application, zalloc and zfree must be + thread safe. In that case, zlib is thread-safe. When zalloc and zfree are + Z_NULL on entry to the initialization function, they are set to internal + routines that use the standard library functions malloc() and free(). + + On 16-bit systems, the functions zalloc and zfree must be able to allocate + exactly 65536 bytes, but will not be required to allocate more than this if + the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS, pointers + returned by zalloc for objects of exactly 65536 bytes *must* have their + offset normalized to zero. The default allocation function provided by this + library ensures this (see zutil.c). To reduce memory requirements and avoid + any allocation of 64K objects, at the expense of compression ratio, compile + the library with -DMAX_WBITS=14 (see zconf.h). + + The fields total_in and total_out can be used for statistics or progress + reports. After compression, total_in holds the total size of the + uncompressed data and may be saved for use by the decompressor (particularly + if the decompressor wants to decompress everything in a single step). +*/ + + /* constants */ + +#define Z_NO_FLUSH 0 +#define Z_PARTIAL_FLUSH 1 +#define Z_SYNC_FLUSH 2 +#define Z_FULL_FLUSH 3 +#define Z_FINISH 4 +#define Z_BLOCK 5 +#define Z_TREES 6 +/* Allowed flush values; see deflate() and inflate() below for details */ + +#define Z_OK 0 +#define Z_STREAM_END 1 +#define Z_NEED_DICT 2 +#define Z_ERRNO (-1) +#define Z_STREAM_ERROR (-2) +#define Z_DATA_ERROR (-3) +#define Z_MEM_ERROR (-4) +#define Z_BUF_ERROR (-5) +#define Z_VERSION_ERROR (-6) +/* Return codes for the compression/decompression functions. Negative values + * are errors, positive values are used for special but normal events. + */ + +#define Z_NO_COMPRESSION 0 +#define Z_BEST_SPEED 1 +#define Z_BEST_COMPRESSION 9 +#define Z_DEFAULT_COMPRESSION (-1) +/* compression levels */ + +#define Z_FILTERED 1 +#define Z_HUFFMAN_ONLY 2 +#define Z_RLE 3 +#define Z_FIXED 4 +#define Z_DEFAULT_STRATEGY 0 +/* compression strategy; see deflateInit2() below for details */ + +#define Z_BINARY 0 +#define Z_TEXT 1 +#define Z_ASCII Z_TEXT /* for compatibility with 1.2.2 and earlier */ +#define Z_UNKNOWN 2 +/* Possible values of the data_type field for deflate() */ + +#define Z_DEFLATED 8 +/* The deflate compression method (the only one supported in this version) */ + +#define Z_NULL 0 /* for initializing zalloc, zfree, opaque */ + +#define zlib_version zlibVersion() +/* for compatibility with versions < 1.0.2 */ + + + /* basic functions */ + +ZEXTERN const char * ZEXPORT zlibVersion(void); +/* The application can compare zlibVersion and ZLIB_VERSION for consistency. + If the first character differs, the library code actually used is not + compatible with the zlib.h header file used by the application. This check + is automatically made by deflateInit and inflateInit. + */ + +/* +ZEXTERN int ZEXPORT deflateInit(z_streamp strm, int level); + + Initializes the internal stream state for compression. The fields + zalloc, zfree and opaque must be initialized before by the caller. If + zalloc and zfree are set to Z_NULL, deflateInit updates them to use default + allocation functions. total_in, total_out, adler, and msg are initialized. + + The compression level must be Z_DEFAULT_COMPRESSION, or between 0 and 9: + 1 gives best speed, 9 gives best compression, 0 gives no compression at all + (the input data is simply copied a block at a time). Z_DEFAULT_COMPRESSION + requests a default compromise between speed and compression (currently + equivalent to level 6). + + deflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough + memory, Z_STREAM_ERROR if level is not a valid compression level, or + Z_VERSION_ERROR if the zlib library version (zlib_version) is incompatible + with the version assumed by the caller (ZLIB_VERSION). msg is set to null + if there is no error message. deflateInit does not perform any compression: + this will be done by deflate(). +*/ + + +ZEXTERN int ZEXPORT deflate(z_streamp strm, int flush); +/* + deflate compresses as much data as possible, and stops when the input + buffer becomes empty or the output buffer becomes full. It may introduce + some output latency (reading input without producing any output) except when + forced to flush. + + The detailed semantics are as follows. deflate performs one or both of the + following actions: + + - Compress more input starting at next_in and update next_in and avail_in + accordingly. If not all input can be processed (because there is not + enough room in the output buffer), next_in and avail_in are updated and + processing will resume at this point for the next call of deflate(). + + - Generate more output starting at next_out and update next_out and avail_out + accordingly. This action is forced if the parameter flush is non zero. + Forcing flush frequently degrades the compression ratio, so this parameter + should be set only when necessary. Some output may be provided even if + flush is zero. + + Before the call of deflate(), the application should ensure that at least + one of the actions is possible, by providing more input and/or consuming more + output, and updating avail_in or avail_out accordingly; avail_out should + never be zero before the call. The application can consume the compressed + output when it wants, for example when the output buffer is full (avail_out + == 0), or after each call of deflate(). If deflate returns Z_OK and with + zero avail_out, it must be called again after making room in the output + buffer because there might be more output pending. See deflatePending(), + which can be used if desired to determine whether or not there is more output + in that case. + + Normally the parameter flush is set to Z_NO_FLUSH, which allows deflate to + decide how much data to accumulate before producing output, in order to + maximize compression. + + If the parameter flush is set to Z_SYNC_FLUSH, all pending output is + flushed to the output buffer and the output is aligned on a byte boundary, so + that the decompressor can get all input data available so far. (In + particular avail_in is zero after the call if enough output space has been + provided before the call.) Flushing may degrade compression for some + compression algorithms and so it should be used only when necessary. This + completes the current deflate block and follows it with an empty stored block + that is three bits plus filler bits to the next byte, followed by four bytes + (00 00 ff ff). + + If flush is set to Z_PARTIAL_FLUSH, all pending output is flushed to the + output buffer, but the output is not aligned to a byte boundary. All of the + input data so far will be available to the decompressor, as for Z_SYNC_FLUSH. + This completes the current deflate block and follows it with an empty fixed + codes block that is 10 bits long. This assures that enough bytes are output + in order for the decompressor to finish the block before the empty fixed + codes block. + + If flush is set to Z_BLOCK, a deflate block is completed and emitted, as + for Z_SYNC_FLUSH, but the output is not aligned on a byte boundary, and up to + seven bits of the current block are held to be written as the next byte after + the next deflate block is completed. In this case, the decompressor may not + be provided enough bits at this point in order to complete decompression of + the data provided so far to the compressor. It may need to wait for the next + block to be emitted. This is for advanced applications that need to control + the emission of deflate blocks. + + If flush is set to Z_FULL_FLUSH, all output is flushed as with + Z_SYNC_FLUSH, and the compression state is reset so that decompression can + restart from this point if previous compressed data has been damaged or if + random access is desired. Using Z_FULL_FLUSH too often can seriously degrade + compression. + + If deflate returns with avail_out == 0, this function must be called again + with the same value of the flush parameter and more output space (updated + avail_out), until the flush is complete (deflate returns with non-zero + avail_out). In the case of a Z_FULL_FLUSH or Z_SYNC_FLUSH, make sure that + avail_out is greater than six when the flush marker begins, in order to avoid + repeated flush markers upon calling deflate() again when avail_out == 0. + + If the parameter flush is set to Z_FINISH, pending input is processed, + pending output is flushed and deflate returns with Z_STREAM_END if there was + enough output space. If deflate returns with Z_OK or Z_BUF_ERROR, this + function must be called again with Z_FINISH and more output space (updated + avail_out) but no more input data, until it returns with Z_STREAM_END or an + error. After deflate has returned Z_STREAM_END, the only possible operations + on the stream are deflateReset or deflateEnd. + + Z_FINISH can be used in the first deflate call after deflateInit if all the + compression is to be done in a single step. In order to complete in one + call, avail_out must be at least the value returned by deflateBound (see + below). Then deflate is guaranteed to return Z_STREAM_END. If not enough + output space is provided, deflate will not return Z_STREAM_END, and it must + be called again as described above. + + deflate() sets strm->adler to the Adler-32 checksum of all input read + so far (that is, total_in bytes). If a gzip stream is being generated, then + strm->adler will be the CRC-32 checksum of the input read so far. (See + deflateInit2 below.) + + deflate() may update strm->data_type if it can make a good guess about + the input data type (Z_BINARY or Z_TEXT). If in doubt, the data is + considered binary. This field is only for information purposes and does not + affect the compression algorithm in any manner. + + deflate() returns Z_OK if some progress has been made (more input + processed or more output produced), Z_STREAM_END if all input has been + consumed and all output has been produced (only when flush is set to + Z_FINISH), Z_STREAM_ERROR if the stream state was inconsistent (for example + if next_in or next_out was Z_NULL or the state was inadvertently written over + by the application), or Z_BUF_ERROR if no progress is possible (for example + avail_in or avail_out was zero). Note that Z_BUF_ERROR is not fatal, and + deflate() can be called again with more input and more output space to + continue compressing. +*/ + + +ZEXTERN int ZEXPORT deflateEnd(z_streamp strm); +/* + All dynamically allocated data structures for this stream are freed. + This function discards any unprocessed input and does not flush any pending + output. + + deflateEnd returns Z_OK if success, Z_STREAM_ERROR if the + stream state was inconsistent, Z_DATA_ERROR if the stream was freed + prematurely (some input or output was discarded). In the error case, msg + may be set but then points to a static string (which must not be + deallocated). +*/ + + +/* +ZEXTERN int ZEXPORT inflateInit(z_streamp strm); + + Initializes the internal stream state for decompression. The fields + next_in, avail_in, zalloc, zfree and opaque must be initialized before by + the caller. In the current version of inflate, the provided input is not + read or consumed. The allocation of a sliding window will be deferred to + the first call of inflate (if the decompression does not complete on the + first call). If zalloc and zfree are set to Z_NULL, inflateInit updates + them to use default allocation functions. total_in, total_out, adler, and + msg are initialized. + + inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough + memory, Z_VERSION_ERROR if the zlib library version is incompatible with the + version assumed by the caller, or Z_STREAM_ERROR if the parameters are + invalid, such as a null pointer to the structure. msg is set to null if + there is no error message. inflateInit does not perform any decompression. + Actual decompression will be done by inflate(). So next_in, and avail_in, + next_out, and avail_out are unused and unchanged. The current + implementation of inflateInit() does not process any header information -- + that is deferred until inflate() is called. +*/ + + +ZEXTERN int ZEXPORT inflate(z_streamp strm, int flush); +/* + inflate decompresses as much data as possible, and stops when the input + buffer becomes empty or the output buffer becomes full. It may introduce + some output latency (reading input without producing any output) except when + forced to flush. + + The detailed semantics are as follows. inflate performs one or both of the + following actions: + + - Decompress more input starting at next_in and update next_in and avail_in + accordingly. If not all input can be processed (because there is not + enough room in the output buffer), then next_in and avail_in are updated + accordingly, and processing will resume at this point for the next call of + inflate(). + + - Generate more output starting at next_out and update next_out and avail_out + accordingly. inflate() provides as much output as possible, until there is + no more input data or no more space in the output buffer (see below about + the flush parameter). + + Before the call of inflate(), the application should ensure that at least + one of the actions is possible, by providing more input and/or consuming more + output, and updating the next_* and avail_* values accordingly. If the + caller of inflate() does not provide both available input and available + output space, it is possible that there will be no progress made. The + application can consume the uncompressed output when it wants, for example + when the output buffer is full (avail_out == 0), or after each call of + inflate(). If inflate returns Z_OK and with zero avail_out, it must be + called again after making room in the output buffer because there might be + more output pending. + + The flush parameter of inflate() can be Z_NO_FLUSH, Z_SYNC_FLUSH, Z_FINISH, + Z_BLOCK, or Z_TREES. Z_SYNC_FLUSH requests that inflate() flush as much + output as possible to the output buffer. Z_BLOCK requests that inflate() + stop if and when it gets to the next deflate block boundary. When decoding + the zlib or gzip format, this will cause inflate() to return immediately + after the header and before the first block. When doing a raw inflate, + inflate() will go ahead and process the first block, and will return when it + gets to the end of that block, or when it runs out of data. + + The Z_BLOCK option assists in appending to or combining deflate streams. + To assist in this, on return inflate() always sets strm->data_type to the + number of unused bits in the last byte taken from strm->next_in, plus 64 if + inflate() is currently decoding the last block in the deflate stream, plus + 128 if inflate() returned immediately after decoding an end-of-block code or + decoding the complete header up to just before the first byte of the deflate + stream. The end-of-block will not be indicated until all of the uncompressed + data from that block has been written to strm->next_out. The number of + unused bits may in general be greater than seven, except when bit 7 of + data_type is set, in which case the number of unused bits will be less than + eight. data_type is set as noted here every time inflate() returns for all + flush options, and so can be used to determine the amount of currently + consumed input in bits. + + The Z_TREES option behaves as Z_BLOCK does, but it also returns when the + end of each deflate block header is reached, before any actual data in that + block is decoded. This allows the caller to determine the length of the + deflate block header for later use in random access within a deflate block. + 256 is added to the value of strm->data_type when inflate() returns + immediately after reaching the end of the deflate block header. + + inflate() should normally be called until it returns Z_STREAM_END or an + error. However if all decompression is to be performed in a single step (a + single call of inflate), the parameter flush should be set to Z_FINISH. In + this case all pending input is processed and all pending output is flushed; + avail_out must be large enough to hold all of the uncompressed data for the + operation to complete. (The size of the uncompressed data may have been + saved by the compressor for this purpose.) The use of Z_FINISH is not + required to perform an inflation in one step. However it may be used to + inform inflate that a faster approach can be used for the single inflate() + call. Z_FINISH also informs inflate to not maintain a sliding window if the + stream completes, which reduces inflate's memory footprint. If the stream + does not complete, either because not all of the stream is provided or not + enough output space is provided, then a sliding window will be allocated and + inflate() can be called again to continue the operation as if Z_NO_FLUSH had + been used. + + In this implementation, inflate() always flushes as much output as + possible to the output buffer, and always uses the faster approach on the + first call. So the effects of the flush parameter in this implementation are + on the return value of inflate() as noted below, when inflate() returns early + when Z_BLOCK or Z_TREES is used, and when inflate() avoids the allocation of + memory for a sliding window when Z_FINISH is used. + + If a preset dictionary is needed after this call (see inflateSetDictionary + below), inflate sets strm->adler to the Adler-32 checksum of the dictionary + chosen by the compressor and returns Z_NEED_DICT; otherwise it sets + strm->adler to the Adler-32 checksum of all output produced so far (that is, + total_out bytes) and returns Z_OK, Z_STREAM_END or an error code as described + below. At the end of the stream, inflate() checks that its computed Adler-32 + checksum is equal to that saved by the compressor and returns Z_STREAM_END + only if the checksum is correct. + + inflate() can decompress and check either zlib-wrapped or gzip-wrapped + deflate data. The header type is detected automatically, if requested when + initializing with inflateInit2(). Any information contained in the gzip + header is not retained unless inflateGetHeader() is used. When processing + gzip-wrapped deflate data, strm->adler32 is set to the CRC-32 of the output + produced so far. The CRC-32 is checked against the gzip trailer, as is the + uncompressed length, modulo 2^32. + + inflate() returns Z_OK if some progress has been made (more input processed + or more output produced), Z_STREAM_END if the end of the compressed data has + been reached and all uncompressed output has been produced, Z_NEED_DICT if a + preset dictionary is needed at this point, Z_DATA_ERROR if the input data was + corrupted (input stream not conforming to the zlib format or incorrect check + value, in which case strm->msg points to a string with a more specific + error), Z_STREAM_ERROR if the stream structure was inconsistent (for example + next_in or next_out was Z_NULL, or the state was inadvertently written over + by the application), Z_MEM_ERROR if there was not enough memory, Z_BUF_ERROR + if no progress was possible or if there was not enough room in the output + buffer when Z_FINISH is used. Note that Z_BUF_ERROR is not fatal, and + inflate() can be called again with more input and more output space to + continue decompressing. If Z_DATA_ERROR is returned, the application may + then call inflateSync() to look for a good compression block if a partial + recovery of the data is to be attempted. +*/ + + +ZEXTERN int ZEXPORT inflateEnd(z_streamp strm); +/* + All dynamically allocated data structures for this stream are freed. + This function discards any unprocessed input and does not flush any pending + output. + + inflateEnd returns Z_OK if success, or Z_STREAM_ERROR if the stream state + was inconsistent. +*/ + + + /* Advanced functions */ + +/* + The following functions are needed only in some special applications. +*/ + +/* +ZEXTERN int ZEXPORT deflateInit2(z_streamp strm, + int level, + int method, + int windowBits, + int memLevel, + int strategy); + + This is another version of deflateInit with more compression options. The + fields zalloc, zfree and opaque must be initialized before by the caller. + + The method parameter is the compression method. It must be Z_DEFLATED in + this version of the library. + + The windowBits parameter is the base two logarithm of the window size + (the size of the history buffer). It should be in the range 8..15 for this + version of the library. Larger values of this parameter result in better + compression at the expense of memory usage. The default value is 15 if + deflateInit is used instead. + + For the current implementation of deflate(), a windowBits value of 8 (a + window size of 256 bytes) is not supported. As a result, a request for 8 + will result in 9 (a 512-byte window). In that case, providing 8 to + inflateInit2() will result in an error when the zlib header with 9 is + checked against the initialization of inflate(). The remedy is to not use 8 + with deflateInit2() with this initialization, or at least in that case use 9 + with inflateInit2(). + + windowBits can also be -8..-15 for raw deflate. In this case, -windowBits + determines the window size. deflate() will then generate raw deflate data + with no zlib header or trailer, and will not compute a check value. + + windowBits can also be greater than 15 for optional gzip encoding. Add + 16 to windowBits to write a simple gzip header and trailer around the + compressed data instead of a zlib wrapper. The gzip header will have no + file name, no extra data, no comment, no modification time (set to zero), no + header crc, and the operating system will be set to the appropriate value, + if the operating system was determined at compile time. If a gzip stream is + being written, strm->adler is a CRC-32 instead of an Adler-32. + + For raw deflate or gzip encoding, a request for a 256-byte window is + rejected as invalid, since only the zlib header provides a means of + transmitting the window size to the decompressor. + + The memLevel parameter specifies how much memory should be allocated + for the internal compression state. memLevel=1 uses minimum memory but is + slow and reduces compression ratio; memLevel=9 uses maximum memory for + optimal speed. The default value is 8. See zconf.h for total memory usage + as a function of windowBits and memLevel. + + The strategy parameter is used to tune the compression algorithm. Use the + value Z_DEFAULT_STRATEGY for normal data, Z_FILTERED for data produced by a + filter (or predictor), Z_HUFFMAN_ONLY to force Huffman encoding only (no + string match), or Z_RLE to limit match distances to one (run-length + encoding). Filtered data consists mostly of small values with a somewhat + random distribution. In this case, the compression algorithm is tuned to + compress them better. The effect of Z_FILTERED is to force more Huffman + coding and less string matching; it is somewhat intermediate between + Z_DEFAULT_STRATEGY and Z_HUFFMAN_ONLY. Z_RLE is designed to be almost as + fast as Z_HUFFMAN_ONLY, but give better compression for PNG image data. The + strategy parameter only affects the compression ratio but not the + correctness of the compressed output even if it is not set appropriately. + Z_FIXED prevents the use of dynamic Huffman codes, allowing for a simpler + decoder for special applications. + + deflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough + memory, Z_STREAM_ERROR if any parameter is invalid (such as an invalid + method), or Z_VERSION_ERROR if the zlib library version (zlib_version) is + incompatible with the version assumed by the caller (ZLIB_VERSION). msg is + set to null if there is no error message. deflateInit2 does not perform any + compression: this will be done by deflate(). +*/ + +ZEXTERN int ZEXPORT deflateSetDictionary(z_streamp strm, + const Bytef *dictionary, + uInt dictLength); +/* + Initializes the compression dictionary from the given byte sequence + without producing any compressed output. When using the zlib format, this + function must be called immediately after deflateInit, deflateInit2 or + deflateReset, and before any call of deflate. When doing raw deflate, this + function must be called either before any call of deflate, or immediately + after the completion of a deflate block, i.e. after all input has been + consumed and all output has been delivered when using any of the flush + options Z_BLOCK, Z_PARTIAL_FLUSH, Z_SYNC_FLUSH, or Z_FULL_FLUSH. The + compressor and decompressor must use exactly the same dictionary (see + inflateSetDictionary). + + The dictionary should consist of strings (byte sequences) that are likely + to be encountered later in the data to be compressed, with the most commonly + used strings preferably put towards the end of the dictionary. Using a + dictionary is most useful when the data to be compressed is short and can be + predicted with good accuracy; the data can then be compressed better than + with the default empty dictionary. + + Depending on the size of the compression data structures selected by + deflateInit or deflateInit2, a part of the dictionary may in effect be + discarded, for example if the dictionary is larger than the window size + provided in deflateInit or deflateInit2. Thus the strings most likely to be + useful should be put at the end of the dictionary, not at the front. In + addition, the current implementation of deflate will use at most the window + size minus 262 bytes of the provided dictionary. + + Upon return of this function, strm->adler is set to the Adler-32 value + of the dictionary; the decompressor may later use this value to determine + which dictionary has been used by the compressor. (The Adler-32 value + applies to the whole dictionary even if only a subset of the dictionary is + actually used by the compressor.) If a raw deflate was requested, then the + Adler-32 value is not computed and strm->adler is not set. + + deflateSetDictionary returns Z_OK if success, or Z_STREAM_ERROR if a + parameter is invalid (e.g. dictionary being Z_NULL) or the stream state is + inconsistent (for example if deflate has already been called for this stream + or if not at a block boundary for raw deflate). deflateSetDictionary does + not perform any compression: this will be done by deflate(). +*/ + +ZEXTERN int ZEXPORT deflateGetDictionary(z_streamp strm, + Bytef *dictionary, + uInt *dictLength); +/* + Returns the sliding dictionary being maintained by deflate. dictLength is + set to the number of bytes in the dictionary, and that many bytes are copied + to dictionary. dictionary must have enough space, where 32768 bytes is + always enough. If deflateGetDictionary() is called with dictionary equal to + Z_NULL, then only the dictionary length is returned, and nothing is copied. + Similarly, if dictLength is Z_NULL, then it is not set. + + deflateGetDictionary() may return a length less than the window size, even + when more than the window size in input has been provided. It may return up + to 258 bytes less in that case, due to how zlib's implementation of deflate + manages the sliding window and lookahead for matches, where matches can be + up to 258 bytes long. If the application needs the last window-size bytes of + input, then that would need to be saved by the application outside of zlib. + + deflateGetDictionary returns Z_OK on success, or Z_STREAM_ERROR if the + stream state is inconsistent. +*/ + +ZEXTERN int ZEXPORT deflateCopy(z_streamp dest, + z_streamp source); +/* + Sets the destination stream as a complete copy of the source stream. + + This function can be useful when several compression strategies will be + tried, for example when there are several ways of pre-processing the input + data with a filter. The streams that will be discarded should then be freed + by calling deflateEnd. Note that deflateCopy duplicates the internal + compression state which can be quite large, so this strategy is slow and can + consume lots of memory. + + deflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not + enough memory, Z_STREAM_ERROR if the source stream state was inconsistent + (such as zalloc being Z_NULL). msg is left unchanged in both source and + destination. +*/ + +ZEXTERN int ZEXPORT deflateReset(z_streamp strm); +/* + This function is equivalent to deflateEnd followed by deflateInit, but + does not free and reallocate the internal compression state. The stream + will leave the compression level and any other attributes that may have been + set unchanged. total_in, total_out, adler, and msg are initialized. + + deflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source + stream state was inconsistent (such as zalloc or state being Z_NULL). +*/ + +ZEXTERN int ZEXPORT deflateParams(z_streamp strm, + int level, + int strategy); +/* + Dynamically update the compression level and compression strategy. The + interpretation of level and strategy is as in deflateInit2(). This can be + used to switch between compression and straight copy of the input data, or + to switch to a different kind of input data requiring a different strategy. + If the compression approach (which is a function of the level) or the + strategy is changed, and if there have been any deflate() calls since the + state was initialized or reset, then the input available so far is + compressed with the old level and strategy using deflate(strm, Z_BLOCK). + There are three approaches for the compression levels 0, 1..3, and 4..9 + respectively. The new level and strategy will take effect at the next call + of deflate(). + + If a deflate(strm, Z_BLOCK) is performed by deflateParams(), and it does + not have enough output space to complete, then the parameter change will not + take effect. In this case, deflateParams() can be called again with the + same parameters and more output space to try again. + + In order to assure a change in the parameters on the first try, the + deflate stream should be flushed using deflate() with Z_BLOCK or other flush + request until strm.avail_out is not zero, before calling deflateParams(). + Then no more input data should be provided before the deflateParams() call. + If this is done, the old level and strategy will be applied to the data + compressed before deflateParams(), and the new level and strategy will be + applied to the data compressed after deflateParams(). + + deflateParams returns Z_OK on success, Z_STREAM_ERROR if the source stream + state was inconsistent or if a parameter was invalid, or Z_BUF_ERROR if + there was not enough output space to complete the compression of the + available input data before a change in the strategy or approach. Note that + in the case of a Z_BUF_ERROR, the parameters are not changed. A return + value of Z_BUF_ERROR is not fatal, in which case deflateParams() can be + retried with more output space. +*/ + +ZEXTERN int ZEXPORT deflateTune(z_streamp strm, + int good_length, + int max_lazy, + int nice_length, + int max_chain); +/* + Fine tune deflate's internal compression parameters. This should only be + used by someone who understands the algorithm used by zlib's deflate for + searching for the best matching string, and even then only by the most + fanatic optimizer trying to squeeze out the last compressed bit for their + specific input data. Read the deflate.c source code for the meaning of the + max_lazy, good_length, nice_length, and max_chain parameters. + + deflateTune() can be called after deflateInit() or deflateInit2(), and + returns Z_OK on success, or Z_STREAM_ERROR for an invalid deflate stream. + */ + +ZEXTERN uLong ZEXPORT deflateBound(z_streamp strm, + uLong sourceLen); +/* + deflateBound() returns an upper bound on the compressed size after + deflation of sourceLen bytes. It must be called after deflateInit() or + deflateInit2(), and after deflateSetHeader(), if used. This would be used + to allocate an output buffer for deflation in a single pass, and so would be + called before deflate(). If that first deflate() call is provided the + sourceLen input bytes, an output buffer allocated to the size returned by + deflateBound(), and the flush value Z_FINISH, then deflate() is guaranteed + to return Z_STREAM_END. Note that it is possible for the compressed size to + be larger than the value returned by deflateBound() if flush options other + than Z_FINISH or Z_NO_FLUSH are used. +*/ + +ZEXTERN int ZEXPORT deflatePending(z_streamp strm, + unsigned *pending, + int *bits); +/* + deflatePending() returns the number of bytes and bits of output that have + been generated, but not yet provided in the available output. The bytes not + provided would be due to the available output space having being consumed. + The number of bits of output not provided are between 0 and 7, where they + await more bits to join them in order to fill out a full byte. If pending + or bits are Z_NULL, then those values are not set. + + deflatePending returns Z_OK if success, or Z_STREAM_ERROR if the source + stream state was inconsistent. + */ + +ZEXTERN int ZEXPORT deflatePrime(z_streamp strm, + int bits, + int value); +/* + deflatePrime() inserts bits in the deflate output stream. The intent + is that this function is used to start off the deflate output with the bits + leftover from a previous deflate stream when appending to it. As such, this + function can only be used for raw deflate, and must be used before the first + deflate() call after a deflateInit2() or deflateReset(). bits must be less + than or equal to 16, and that many of the least significant bits of value + will be inserted in the output. + + deflatePrime returns Z_OK if success, Z_BUF_ERROR if there was not enough + room in the internal buffer to insert the bits, or Z_STREAM_ERROR if the + source stream state was inconsistent. +*/ + +ZEXTERN int ZEXPORT deflateSetHeader(z_streamp strm, + gz_headerp head); +/* + deflateSetHeader() provides gzip header information for when a gzip + stream is requested by deflateInit2(). deflateSetHeader() may be called + after deflateInit2() or deflateReset() and before the first call of + deflate(). The text, time, os, extra field, name, and comment information + in the provided gz_header structure are written to the gzip header (xflag is + ignored -- the extra flags are set according to the compression level). The + caller must assure that, if not Z_NULL, name and comment are terminated with + a zero byte, and that if extra is not Z_NULL, that extra_len bytes are + available there. If hcrc is true, a gzip header crc is included. Note that + the current versions of the command-line version of gzip (up through version + 1.3.x) do not support header crc's, and will report that it is a "multi-part + gzip file" and give up. + + If deflateSetHeader is not used, the default gzip header has text false, + the time set to zero, and os set to the current operating system, with no + extra, name, or comment fields. The gzip header is returned to the default + state by deflateReset(). + + deflateSetHeader returns Z_OK if success, or Z_STREAM_ERROR if the source + stream state was inconsistent. +*/ + +/* +ZEXTERN int ZEXPORT inflateInit2(z_streamp strm, + int windowBits); + + This is another version of inflateInit with an extra parameter. The + fields next_in, avail_in, zalloc, zfree and opaque must be initialized + before by the caller. + + The windowBits parameter is the base two logarithm of the maximum window + size (the size of the history buffer). It should be in the range 8..15 for + this version of the library. The default value is 15 if inflateInit is used + instead. windowBits must be greater than or equal to the windowBits value + provided to deflateInit2() while compressing, or it must be equal to 15 if + deflateInit2() was not used. If a compressed stream with a larger window + size is given as input, inflate() will return with the error code + Z_DATA_ERROR instead of trying to allocate a larger window. + + windowBits can also be zero to request that inflate use the window size in + the zlib header of the compressed stream. + + windowBits can also be -8..-15 for raw inflate. In this case, -windowBits + determines the window size. inflate() will then process raw deflate data, + not looking for a zlib or gzip header, not generating a check value, and not + looking for any check values for comparison at the end of the stream. This + is for use with other formats that use the deflate compressed data format + such as zip. Those formats provide their own check values. If a custom + format is developed using the raw deflate format for compressed data, it is + recommended that a check value such as an Adler-32 or a CRC-32 be applied to + the uncompressed data as is done in the zlib, gzip, and zip formats. For + most applications, the zlib format should be used as is. Note that comments + above on the use in deflateInit2() applies to the magnitude of windowBits. + + windowBits can also be greater than 15 for optional gzip decoding. Add + 32 to windowBits to enable zlib and gzip decoding with automatic header + detection, or add 16 to decode only the gzip format (the zlib format will + return a Z_DATA_ERROR). If a gzip stream is being decoded, strm->adler is a + CRC-32 instead of an Adler-32. Unlike the gunzip utility and gzread() (see + below), inflate() will *not* automatically decode concatenated gzip members. + inflate() will return Z_STREAM_END at the end of the gzip member. The state + would need to be reset to continue decoding a subsequent gzip member. This + *must* be done if there is more data after a gzip member, in order for the + decompression to be compliant with the gzip standard (RFC 1952). + + inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough + memory, Z_VERSION_ERROR if the zlib library version is incompatible with the + version assumed by the caller, or Z_STREAM_ERROR if the parameters are + invalid, such as a null pointer to the structure. msg is set to null if + there is no error message. inflateInit2 does not perform any decompression + apart from possibly reading the zlib header if present: actual decompression + will be done by inflate(). (So next_in and avail_in may be modified, but + next_out and avail_out are unused and unchanged.) The current implementation + of inflateInit2() does not process any header information -- that is + deferred until inflate() is called. +*/ + +ZEXTERN int ZEXPORT inflateSetDictionary(z_streamp strm, + const Bytef *dictionary, + uInt dictLength); +/* + Initializes the decompression dictionary from the given uncompressed byte + sequence. This function must be called immediately after a call of inflate, + if that call returned Z_NEED_DICT. The dictionary chosen by the compressor + can be determined from the Adler-32 value returned by that call of inflate. + The compressor and decompressor must use exactly the same dictionary (see + deflateSetDictionary). For raw inflate, this function can be called at any + time to set the dictionary. If the provided dictionary is smaller than the + window and there is already data in the window, then the provided dictionary + will amend what's there. The application must insure that the dictionary + that was used for compression is provided. + + inflateSetDictionary returns Z_OK if success, Z_STREAM_ERROR if a + parameter is invalid (e.g. dictionary being Z_NULL) or the stream state is + inconsistent, Z_DATA_ERROR if the given dictionary doesn't match the + expected one (incorrect Adler-32 value). inflateSetDictionary does not + perform any decompression: this will be done by subsequent calls of + inflate(). +*/ + +ZEXTERN int ZEXPORT inflateGetDictionary(z_streamp strm, + Bytef *dictionary, + uInt *dictLength); +/* + Returns the sliding dictionary being maintained by inflate. dictLength is + set to the number of bytes in the dictionary, and that many bytes are copied + to dictionary. dictionary must have enough space, where 32768 bytes is + always enough. If inflateGetDictionary() is called with dictionary equal to + Z_NULL, then only the dictionary length is returned, and nothing is copied. + Similarly, if dictLength is Z_NULL, then it is not set. + + inflateGetDictionary returns Z_OK on success, or Z_STREAM_ERROR if the + stream state is inconsistent. +*/ + +ZEXTERN int ZEXPORT inflateSync(z_streamp strm); +/* + Skips invalid compressed data until a possible full flush point (see above + for the description of deflate with Z_FULL_FLUSH) can be found, or until all + available input is skipped. No output is provided. + + inflateSync searches for a 00 00 FF FF pattern in the compressed data. + All full flush points have this pattern, but not all occurrences of this + pattern are full flush points. + + inflateSync returns Z_OK if a possible full flush point has been found, + Z_BUF_ERROR if no more input was provided, Z_DATA_ERROR if no flush point + has been found, or Z_STREAM_ERROR if the stream structure was inconsistent. + In the success case, the application may save the current value of total_in + which indicates where valid compressed data was found. In the error case, + the application may repeatedly call inflateSync, providing more input each + time, until success or end of the input data. +*/ + +ZEXTERN int ZEXPORT inflateCopy(z_streamp dest, + z_streamp source); +/* + Sets the destination stream as a complete copy of the source stream. + + This function can be useful when randomly accessing a large stream. The + first pass through the stream can periodically record the inflate state, + allowing restarting inflate at those points when randomly accessing the + stream. + + inflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not + enough memory, Z_STREAM_ERROR if the source stream state was inconsistent + (such as zalloc being Z_NULL). msg is left unchanged in both source and + destination. +*/ + +ZEXTERN int ZEXPORT inflateReset(z_streamp strm); +/* + This function is equivalent to inflateEnd followed by inflateInit, + but does not free and reallocate the internal decompression state. The + stream will keep attributes that may have been set by inflateInit2. + total_in, total_out, adler, and msg are initialized. + + inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source + stream state was inconsistent (such as zalloc or state being Z_NULL). +*/ + +ZEXTERN int ZEXPORT inflateReset2(z_streamp strm, + int windowBits); +/* + This function is the same as inflateReset, but it also permits changing + the wrap and window size requests. The windowBits parameter is interpreted + the same as it is for inflateInit2. If the window size is changed, then the + memory allocated for the window is freed, and the window will be reallocated + by inflate() if needed. + + inflateReset2 returns Z_OK if success, or Z_STREAM_ERROR if the source + stream state was inconsistent (such as zalloc or state being Z_NULL), or if + the windowBits parameter is invalid. +*/ + +ZEXTERN int ZEXPORT inflatePrime(z_streamp strm, + int bits, + int value); +/* + This function inserts bits in the inflate input stream. The intent is + that this function is used to start inflating at a bit position in the + middle of a byte. The provided bits will be used before any bytes are used + from next_in. This function should only be used with raw inflate, and + should be used before the first inflate() call after inflateInit2() or + inflateReset(). bits must be less than or equal to 16, and that many of the + least significant bits of value will be inserted in the input. + + If bits is negative, then the input stream bit buffer is emptied. Then + inflatePrime() can be called again to put bits in the buffer. This is used + to clear out bits leftover after feeding inflate a block description prior + to feeding inflate codes. + + inflatePrime returns Z_OK if success, or Z_STREAM_ERROR if the source + stream state was inconsistent. +*/ + +ZEXTERN long ZEXPORT inflateMark(z_streamp strm); +/* + This function returns two values, one in the lower 16 bits of the return + value, and the other in the remaining upper bits, obtained by shifting the + return value down 16 bits. If the upper value is -1 and the lower value is + zero, then inflate() is currently decoding information outside of a block. + If the upper value is -1 and the lower value is non-zero, then inflate is in + the middle of a stored block, with the lower value equaling the number of + bytes from the input remaining to copy. If the upper value is not -1, then + it is the number of bits back from the current bit position in the input of + the code (literal or length/distance pair) currently being processed. In + that case the lower value is the number of bytes already emitted for that + code. + + A code is being processed if inflate is waiting for more input to complete + decoding of the code, or if it has completed decoding but is waiting for + more output space to write the literal or match data. + + inflateMark() is used to mark locations in the input data for random + access, which may be at bit positions, and to note those cases where the + output of a code may span boundaries of random access blocks. The current + location in the input stream can be determined from avail_in and data_type + as noted in the description for the Z_BLOCK flush parameter for inflate. + + inflateMark returns the value noted above, or -65536 if the provided + source stream state was inconsistent. +*/ + +ZEXTERN int ZEXPORT inflateGetHeader(z_streamp strm, + gz_headerp head); +/* + inflateGetHeader() requests that gzip header information be stored in the + provided gz_header structure. inflateGetHeader() may be called after + inflateInit2() or inflateReset(), and before the first call of inflate(). + As inflate() processes the gzip stream, head->done is zero until the header + is completed, at which time head->done is set to one. If a zlib stream is + being decoded, then head->done is set to -1 to indicate that there will be + no gzip header information forthcoming. Note that Z_BLOCK or Z_TREES can be + used to force inflate() to return immediately after header processing is + complete and before any actual data is decompressed. + + The text, time, xflags, and os fields are filled in with the gzip header + contents. hcrc is set to true if there is a header CRC. (The header CRC + was valid if done is set to one.) If extra is not Z_NULL, then extra_max + contains the maximum number of bytes to write to extra. Once done is true, + extra_len contains the actual extra field length, and extra contains the + extra field, or that field truncated if extra_max is less than extra_len. + If name is not Z_NULL, then up to name_max characters are written there, + terminated with a zero unless the length is greater than name_max. If + comment is not Z_NULL, then up to comm_max characters are written there, + terminated with a zero unless the length is greater than comm_max. When any + of extra, name, or comment are not Z_NULL and the respective field is not + present in the header, then that field is set to Z_NULL to signal its + absence. This allows the use of deflateSetHeader() with the returned + structure to duplicate the header. However if those fields are set to + allocated memory, then the application will need to save those pointers + elsewhere so that they can be eventually freed. + + If inflateGetHeader is not used, then the header information is simply + discarded. The header is always checked for validity, including the header + CRC if present. inflateReset() will reset the process to discard the header + information. The application would need to call inflateGetHeader() again to + retrieve the header from the next gzip stream. + + inflateGetHeader returns Z_OK if success, or Z_STREAM_ERROR if the source + stream state was inconsistent. +*/ + +/* +ZEXTERN int ZEXPORT inflateBackInit(z_streamp strm, int windowBits, + unsigned char FAR *window); + + Initialize the internal stream state for decompression using inflateBack() + calls. The fields zalloc, zfree and opaque in strm must be initialized + before the call. If zalloc and zfree are Z_NULL, then the default library- + derived memory allocation routines are used. windowBits is the base two + logarithm of the window size, in the range 8..15. window is a caller + supplied buffer of that size. Except for special applications where it is + assured that deflate was used with small window sizes, windowBits must be 15 + and a 32K byte window must be supplied to be able to decompress general + deflate streams. + + See inflateBack() for the usage of these routines. + + inflateBackInit will return Z_OK on success, Z_STREAM_ERROR if any of + the parameters are invalid, Z_MEM_ERROR if the internal state could not be + allocated, or Z_VERSION_ERROR if the version of the library does not match + the version of the header file. +*/ + +typedef unsigned (*in_func)(void FAR *, + z_const unsigned char FAR * FAR *); +typedef int (*out_func)(void FAR *, unsigned char FAR *, unsigned); + +ZEXTERN int ZEXPORT inflateBack(z_streamp strm, + in_func in, void FAR *in_desc, + out_func out, void FAR *out_desc); +/* + inflateBack() does a raw inflate with a single call using a call-back + interface for input and output. This is potentially more efficient than + inflate() for file i/o applications, in that it avoids copying between the + output and the sliding window by simply making the window itself the output + buffer. inflate() can be faster on modern CPUs when used with large + buffers. inflateBack() trusts the application to not change the output + buffer passed by the output function, at least until inflateBack() returns. + + inflateBackInit() must be called first to allocate the internal state + and to initialize the state with the user-provided window buffer. + inflateBack() may then be used multiple times to inflate a complete, raw + deflate stream with each call. inflateBackEnd() is then called to free the + allocated state. + + A raw deflate stream is one with no zlib or gzip header or trailer. + This routine would normally be used in a utility that reads zip or gzip + files and writes out uncompressed files. The utility would decode the + header and process the trailer on its own, hence this routine expects only + the raw deflate stream to decompress. This is different from the default + behavior of inflate(), which expects a zlib header and trailer around the + deflate stream. + + inflateBack() uses two subroutines supplied by the caller that are then + called by inflateBack() for input and output. inflateBack() calls those + routines until it reads a complete deflate stream and writes out all of the + uncompressed data, or until it encounters an error. The function's + parameters and return types are defined above in the in_func and out_func + typedefs. inflateBack() will call in(in_desc, &buf) which should return the + number of bytes of provided input, and a pointer to that input in buf. If + there is no input available, in() must return zero -- buf is ignored in that + case -- and inflateBack() will return a buffer error. inflateBack() will + call out(out_desc, buf, len) to write the uncompressed data buf[0..len-1]. + out() should return zero on success, or non-zero on failure. If out() + returns non-zero, inflateBack() will return with an error. Neither in() nor + out() are permitted to change the contents of the window provided to + inflateBackInit(), which is also the buffer that out() uses to write from. + The length written by out() will be at most the window size. Any non-zero + amount of input may be provided by in(). + + For convenience, inflateBack() can be provided input on the first call by + setting strm->next_in and strm->avail_in. If that input is exhausted, then + in() will be called. Therefore strm->next_in must be initialized before + calling inflateBack(). If strm->next_in is Z_NULL, then in() will be called + immediately for input. If strm->next_in is not Z_NULL, then strm->avail_in + must also be initialized, and then if strm->avail_in is not zero, input will + initially be taken from strm->next_in[0 .. strm->avail_in - 1]. + + The in_desc and out_desc parameters of inflateBack() is passed as the + first parameter of in() and out() respectively when they are called. These + descriptors can be optionally used to pass any information that the caller- + supplied in() and out() functions need to do their job. + + On return, inflateBack() will set strm->next_in and strm->avail_in to + pass back any unused input that was provided by the last in() call. The + return values of inflateBack() can be Z_STREAM_END on success, Z_BUF_ERROR + if in() or out() returned an error, Z_DATA_ERROR if there was a format error + in the deflate stream (in which case strm->msg is set to indicate the nature + of the error), or Z_STREAM_ERROR if the stream was not properly initialized. + In the case of Z_BUF_ERROR, an input or output error can be distinguished + using strm->next_in which will be Z_NULL only if in() returned an error. If + strm->next_in is not Z_NULL, then the Z_BUF_ERROR was due to out() returning + non-zero. (in() will always be called before out(), so strm->next_in is + assured to be defined if out() returns non-zero.) Note that inflateBack() + cannot return Z_OK. +*/ + +ZEXTERN int ZEXPORT inflateBackEnd(z_streamp strm); +/* + All memory allocated by inflateBackInit() is freed. + + inflateBackEnd() returns Z_OK on success, or Z_STREAM_ERROR if the stream + state was inconsistent. +*/ + +ZEXTERN uLong ZEXPORT zlibCompileFlags(void); +/* Return flags indicating compile-time options. + + Type sizes, two bits each, 00 = 16 bits, 01 = 32, 10 = 64, 11 = other: + 1.0: size of uInt + 3.2: size of uLong + 5.4: size of voidpf (pointer) + 7.6: size of z_off_t + + Compiler, assembler, and debug options: + 8: ZLIB_DEBUG + 9: ASMV or ASMINF -- use ASM code + 10: ZLIB_WINAPI -- exported functions use the WINAPI calling convention + 11: 0 (reserved) + + One-time table building (smaller code, but not thread-safe if true): + 12: BUILDFIXED -- build static block decoding tables when needed + 13: DYNAMIC_CRC_TABLE -- build CRC calculation tables when needed + 14,15: 0 (reserved) + + Library content (indicates missing functionality): + 16: NO_GZCOMPRESS -- gz* functions cannot compress (to avoid linking + deflate code when not needed) + 17: NO_GZIP -- deflate can't write gzip streams, and inflate can't detect + and decode gzip streams (to avoid linking crc code) + 18-19: 0 (reserved) + + Operation variations (changes in library functionality): + 20: PKZIP_BUG_WORKAROUND -- slightly more permissive inflate + 21: FASTEST -- deflate algorithm with only one, lowest compression level + 22,23: 0 (reserved) + + The sprintf variant used by gzprintf (zero is best): + 24: 0 = vs*, 1 = s* -- 1 means limited to 20 arguments after the format + 25: 0 = *nprintf, 1 = *printf -- 1 means gzprintf() not secure! + 26: 0 = returns value, 1 = void -- 1 means inferred string length returned + + Remainder: + 27-31: 0 (reserved) + */ + +#ifndef Z_SOLO + + /* utility functions */ + +/* + The following utility functions are implemented on top of the basic + stream-oriented functions. To simplify the interface, some default options + are assumed (compression level and memory usage, standard memory allocation + functions). The source code of these utility functions can be modified if + you need special options. +*/ + +ZEXTERN int ZEXPORT compress(Bytef *dest, uLongf *destLen, + const Bytef *source, uLong sourceLen); +/* + Compresses the source buffer into the destination buffer. sourceLen is + the byte length of the source buffer. Upon entry, destLen is the total size + of the destination buffer, which must be at least the value returned by + compressBound(sourceLen). Upon exit, destLen is the actual size of the + compressed data. compress() is equivalent to compress2() with a level + parameter of Z_DEFAULT_COMPRESSION. + + compress returns Z_OK if success, Z_MEM_ERROR if there was not + enough memory, Z_BUF_ERROR if there was not enough room in the output + buffer. +*/ + +ZEXTERN int ZEXPORT compress2(Bytef *dest, uLongf *destLen, + const Bytef *source, uLong sourceLen, + int level); +/* + Compresses the source buffer into the destination buffer. The level + parameter has the same meaning as in deflateInit. sourceLen is the byte + length of the source buffer. Upon entry, destLen is the total size of the + destination buffer, which must be at least the value returned by + compressBound(sourceLen). Upon exit, destLen is the actual size of the + compressed data. + + compress2 returns Z_OK if success, Z_MEM_ERROR if there was not enough + memory, Z_BUF_ERROR if there was not enough room in the output buffer, + Z_STREAM_ERROR if the level parameter is invalid. +*/ + +ZEXTERN uLong ZEXPORT compressBound(uLong sourceLen); +/* + compressBound() returns an upper bound on the compressed size after + compress() or compress2() on sourceLen bytes. It would be used before a + compress() or compress2() call to allocate the destination buffer. +*/ + +ZEXTERN int ZEXPORT uncompress(Bytef *dest, uLongf *destLen, + const Bytef *source, uLong sourceLen); +/* + Decompresses the source buffer into the destination buffer. sourceLen is + the byte length of the source buffer. Upon entry, destLen is the total size + of the destination buffer, which must be large enough to hold the entire + uncompressed data. (The size of the uncompressed data must have been saved + previously by the compressor and transmitted to the decompressor by some + mechanism outside the scope of this compression library.) Upon exit, destLen + is the actual size of the uncompressed data. + + uncompress returns Z_OK if success, Z_MEM_ERROR if there was not + enough memory, Z_BUF_ERROR if there was not enough room in the output + buffer, or Z_DATA_ERROR if the input data was corrupted or incomplete. In + the case where there is not enough room, uncompress() will fill the output + buffer with the uncompressed data up to that point. +*/ + +ZEXTERN int ZEXPORT uncompress2(Bytef *dest, uLongf *destLen, + const Bytef *source, uLong *sourceLen); +/* + Same as uncompress, except that sourceLen is a pointer, where the + length of the source is *sourceLen. On return, *sourceLen is the number of + source bytes consumed. +*/ + + /* gzip file access functions */ + +/* + This library supports reading and writing files in gzip (.gz) format with + an interface similar to that of stdio, using the functions that start with + "gz". The gzip format is different from the zlib format. gzip is a gzip + wrapper, documented in RFC 1952, wrapped around a deflate stream. +*/ + +typedef struct gzFile_s *gzFile; /* semi-opaque gzip file descriptor */ + +/* +ZEXTERN gzFile ZEXPORT gzopen(const char *path, const char *mode); + + Open the gzip (.gz) file at path for reading and decompressing, or + compressing and writing. The mode parameter is as in fopen ("rb" or "wb") + but can also include a compression level ("wb9") or a strategy: 'f' for + filtered data as in "wb6f", 'h' for Huffman-only compression as in "wb1h", + 'R' for run-length encoding as in "wb1R", or 'F' for fixed code compression + as in "wb9F". (See the description of deflateInit2 for more information + about the strategy parameter.) 'T' will request transparent writing or + appending with no compression and not using the gzip format. + + "a" can be used instead of "w" to request that the gzip stream that will + be written be appended to the file. "+" will result in an error, since + reading and writing to the same gzip file is not supported. The addition of + "x" when writing will create the file exclusively, which fails if the file + already exists. On systems that support it, the addition of "e" when + reading or writing will set the flag to close the file on an execve() call. + + These functions, as well as gzip, will read and decode a sequence of gzip + streams in a file. The append function of gzopen() can be used to create + such a file. (Also see gzflush() for another way to do this.) When + appending, gzopen does not test whether the file begins with a gzip stream, + nor does it look for the end of the gzip streams to begin appending. gzopen + will simply append a gzip stream to the existing file. + + gzopen can be used to read a file which is not in gzip format; in this + case gzread will directly read from the file without decompression. When + reading, this will be detected automatically by looking for the magic two- + byte gzip header. + + gzopen returns NULL if the file could not be opened, if there was + insufficient memory to allocate the gzFile state, or if an invalid mode was + specified (an 'r', 'w', or 'a' was not provided, or '+' was provided). + errno can be checked to determine if the reason gzopen failed was that the + file could not be opened. +*/ + +ZEXTERN gzFile ZEXPORT gzdopen(int fd, const char *mode); +/* + Associate a gzFile with the file descriptor fd. File descriptors are + obtained from calls like open, dup, creat, pipe or fileno (if the file has + been previously opened with fopen). The mode parameter is as in gzopen. + + The next call of gzclose on the returned gzFile will also close the file + descriptor fd, just like fclose(fdopen(fd, mode)) closes the file descriptor + fd. If you want to keep fd open, use fd = dup(fd_keep); gz = gzdopen(fd, + mode);. The duplicated descriptor should be saved to avoid a leak, since + gzdopen does not close fd if it fails. If you are using fileno() to get the + file descriptor from a FILE *, then you will have to use dup() to avoid + double-close()ing the file descriptor. Both gzclose() and fclose() will + close the associated file descriptor, so they need to have different file + descriptors. + + gzdopen returns NULL if there was insufficient memory to allocate the + gzFile state, if an invalid mode was specified (an 'r', 'w', or 'a' was not + provided, or '+' was provided), or if fd is -1. The file descriptor is not + used until the next gz* read, write, seek, or close operation, so gzdopen + will not detect if fd is invalid (unless fd is -1). +*/ + +ZEXTERN int ZEXPORT gzbuffer(gzFile file, unsigned size); +/* + Set the internal buffer size used by this library's functions for file to + size. The default buffer size is 8192 bytes. This function must be called + after gzopen() or gzdopen(), and before any other calls that read or write + the file. The buffer memory allocation is always deferred to the first read + or write. Three times that size in buffer space is allocated. A larger + buffer size of, for example, 64K or 128K bytes will noticeably increase the + speed of decompression (reading). + + The new buffer size also affects the maximum length for gzprintf(). + + gzbuffer() returns 0 on success, or -1 on failure, such as being called + too late. +*/ + +ZEXTERN int ZEXPORT gzsetparams(gzFile file, int level, int strategy); +/* + Dynamically update the compression level and strategy for file. See the + description of deflateInit2 for the meaning of these parameters. Previously + provided data is flushed before applying the parameter changes. + + gzsetparams returns Z_OK if success, Z_STREAM_ERROR if the file was not + opened for writing, Z_ERRNO if there is an error writing the flushed data, + or Z_MEM_ERROR if there is a memory allocation error. +*/ + +ZEXTERN int ZEXPORT gzread(gzFile file, voidp buf, unsigned len); +/* + Read and decompress up to len uncompressed bytes from file into buf. If + the input file is not in gzip format, gzread copies the given number of + bytes into the buffer directly from the file. + + After reaching the end of a gzip stream in the input, gzread will continue + to read, looking for another gzip stream. Any number of gzip streams may be + concatenated in the input file, and will all be decompressed by gzread(). + If something other than a gzip stream is encountered after a gzip stream, + that remaining trailing garbage is ignored (and no error is returned). + + gzread can be used to read a gzip file that is being concurrently written. + Upon reaching the end of the input, gzread will return with the available + data. If the error code returned by gzerror is Z_OK or Z_BUF_ERROR, then + gzclearerr can be used to clear the end of file indicator in order to permit + gzread to be tried again. Z_OK indicates that a gzip stream was completed + on the last gzread. Z_BUF_ERROR indicates that the input file ended in the + middle of a gzip stream. Note that gzread does not return -1 in the event + of an incomplete gzip stream. This error is deferred until gzclose(), which + will return Z_BUF_ERROR if the last gzread ended in the middle of a gzip + stream. Alternatively, gzerror can be used before gzclose to detect this + case. + + gzread returns the number of uncompressed bytes actually read, less than + len for end of file, or -1 for error. If len is too large to fit in an int, + then nothing is read, -1 is returned, and the error state is set to + Z_STREAM_ERROR. +*/ + +ZEXTERN z_size_t ZEXPORT gzfread(voidp buf, z_size_t size, z_size_t nitems, + gzFile file); +/* + Read and decompress up to nitems items of size size from file into buf, + otherwise operating as gzread() does. This duplicates the interface of + stdio's fread(), with size_t request and return types. If the library + defines size_t, then z_size_t is identical to size_t. If not, then z_size_t + is an unsigned integer type that can contain a pointer. + + gzfread() returns the number of full items read of size size, or zero if + the end of the file was reached and a full item could not be read, or if + there was an error. gzerror() must be consulted if zero is returned in + order to determine if there was an error. If the multiplication of size and + nitems overflows, i.e. the product does not fit in a z_size_t, then nothing + is read, zero is returned, and the error state is set to Z_STREAM_ERROR. + + In the event that the end of file is reached and only a partial item is + available at the end, i.e. the remaining uncompressed data length is not a + multiple of size, then the final partial item is nevertheless read into buf + and the end-of-file flag is set. The length of the partial item read is not + provided, but could be inferred from the result of gztell(). This behavior + is the same as the behavior of fread() implementations in common libraries, + but it prevents the direct use of gzfread() to read a concurrently written + file, resetting and retrying on end-of-file, when size is not 1. +*/ + +ZEXTERN int ZEXPORT gzwrite(gzFile file, voidpc buf, unsigned len); +/* + Compress and write the len uncompressed bytes at buf to file. gzwrite + returns the number of uncompressed bytes written or 0 in case of error. +*/ + +ZEXTERN z_size_t ZEXPORT gzfwrite(voidpc buf, z_size_t size, + z_size_t nitems, gzFile file); +/* + Compress and write nitems items of size size from buf to file, duplicating + the interface of stdio's fwrite(), with size_t request and return types. If + the library defines size_t, then z_size_t is identical to size_t. If not, + then z_size_t is an unsigned integer type that can contain a pointer. + + gzfwrite() returns the number of full items written of size size, or zero + if there was an error. If the multiplication of size and nitems overflows, + i.e. the product does not fit in a z_size_t, then nothing is written, zero + is returned, and the error state is set to Z_STREAM_ERROR. +*/ + +ZEXTERN int ZEXPORTVA gzprintf(gzFile file, const char *format, ...); +/* + Convert, format, compress, and write the arguments (...) to file under + control of the string format, as in fprintf. gzprintf returns the number of + uncompressed bytes actually written, or a negative zlib error code in case + of error. The number of uncompressed bytes written is limited to 8191, or + one less than the buffer size given to gzbuffer(). The caller should assure + that this limit is not exceeded. If it is exceeded, then gzprintf() will + return an error (0) with nothing written. In this case, there may also be a + buffer overflow with unpredictable consequences, which is possible only if + zlib was compiled with the insecure functions sprintf() or vsprintf(), + because the secure snprintf() or vsnprintf() functions were not available. + This can be determined using zlibCompileFlags(). +*/ + +ZEXTERN int ZEXPORT gzputs(gzFile file, const char *s); +/* + Compress and write the given null-terminated string s to file, excluding + the terminating null character. + + gzputs returns the number of characters written, or -1 in case of error. +*/ + +ZEXTERN char * ZEXPORT gzgets(gzFile file, char *buf, int len); +/* + Read and decompress bytes from file into buf, until len-1 characters are + read, or until a newline character is read and transferred to buf, or an + end-of-file condition is encountered. If any characters are read or if len + is one, the string is terminated with a null character. If no characters + are read due to an end-of-file or len is less than one, then the buffer is + left untouched. + + gzgets returns buf which is a null-terminated string, or it returns NULL + for end-of-file or in case of error. If there was an error, the contents at + buf are indeterminate. +*/ + +ZEXTERN int ZEXPORT gzputc(gzFile file, int c); +/* + Compress and write c, converted to an unsigned char, into file. gzputc + returns the value that was written, or -1 in case of error. +*/ + +ZEXTERN int ZEXPORT gzgetc(gzFile file); +/* + Read and decompress one byte from file. gzgetc returns this byte or -1 + in case of end of file or error. This is implemented as a macro for speed. + As such, it does not do all of the checking the other functions do. I.e. + it does not check to see if file is NULL, nor whether the structure file + points to has been clobbered or not. +*/ + +ZEXTERN int ZEXPORT gzungetc(int c, gzFile file); +/* + Push c back onto the stream for file to be read as the first character on + the next read. At least one character of push-back is always allowed. + gzungetc() returns the character pushed, or -1 on failure. gzungetc() will + fail if c is -1, and may fail if a character has been pushed but not read + yet. If gzungetc is used immediately after gzopen or gzdopen, at least the + output buffer size of pushed characters is allowed. (See gzbuffer above.) + The pushed character will be discarded if the stream is repositioned with + gzseek() or gzrewind(). +*/ + +ZEXTERN int ZEXPORT gzflush(gzFile file, int flush); +/* + Flush all pending output to file. The parameter flush is as in the + deflate() function. The return value is the zlib error number (see function + gzerror below). gzflush is only permitted when writing. + + If the flush parameter is Z_FINISH, the remaining data is written and the + gzip stream is completed in the output. If gzwrite() is called again, a new + gzip stream will be started in the output. gzread() is able to read such + concatenated gzip streams. + + gzflush should be called only when strictly necessary because it will + degrade compression if called too often. +*/ + +/* +ZEXTERN z_off_t ZEXPORT gzseek(gzFile file, + z_off_t offset, int whence); + + Set the starting position to offset relative to whence for the next gzread + or gzwrite on file. The offset represents a number of bytes in the + uncompressed data stream. The whence parameter is defined as in lseek(2); + the value SEEK_END is not supported. + + If the file is opened for reading, this function is emulated but can be + extremely slow. If the file is opened for writing, only forward seeks are + supported; gzseek then compresses a sequence of zeroes up to the new + starting position. + + gzseek returns the resulting offset location as measured in bytes from + the beginning of the uncompressed stream, or -1 in case of error, in + particular if the file is opened for writing and the new starting position + would be before the current position. +*/ + +ZEXTERN int ZEXPORT gzrewind(gzFile file); +/* + Rewind file. This function is supported only for reading. + + gzrewind(file) is equivalent to (int)gzseek(file, 0L, SEEK_SET). +*/ + +/* +ZEXTERN z_off_t ZEXPORT gztell(gzFile file); + + Return the starting position for the next gzread or gzwrite on file. + This position represents a number of bytes in the uncompressed data stream, + and is zero when starting, even if appending or reading a gzip stream from + the middle of a file using gzdopen(). + + gztell(file) is equivalent to gzseek(file, 0L, SEEK_CUR) +*/ + +/* +ZEXTERN z_off_t ZEXPORT gzoffset(gzFile file); + + Return the current compressed (actual) read or write offset of file. This + offset includes the count of bytes that precede the gzip stream, for example + when appending or when using gzdopen() for reading. When reading, the + offset does not include as yet unused buffered input. This information can + be used for a progress indicator. On error, gzoffset() returns -1. +*/ + +ZEXTERN int ZEXPORT gzeof(gzFile file); +/* + Return true (1) if the end-of-file indicator for file has been set while + reading, false (0) otherwise. Note that the end-of-file indicator is set + only if the read tried to go past the end of the input, but came up short. + Therefore, just like feof(), gzeof() may return false even if there is no + more data to read, in the event that the last read request was for the exact + number of bytes remaining in the input file. This will happen if the input + file size is an exact multiple of the buffer size. + + If gzeof() returns true, then the read functions will return no more data, + unless the end-of-file indicator is reset by gzclearerr() and the input file + has grown since the previous end of file was detected. +*/ + +ZEXTERN int ZEXPORT gzdirect(gzFile file); +/* + Return true (1) if file is being copied directly while reading, or false + (0) if file is a gzip stream being decompressed. + + If the input file is empty, gzdirect() will return true, since the input + does not contain a gzip stream. + + If gzdirect() is used immediately after gzopen() or gzdopen() it will + cause buffers to be allocated to allow reading the file to determine if it + is a gzip file. Therefore if gzbuffer() is used, it should be called before + gzdirect(). + + When writing, gzdirect() returns true (1) if transparent writing was + requested ("wT" for the gzopen() mode), or false (0) otherwise. (Note: + gzdirect() is not needed when writing. Transparent writing must be + explicitly requested, so the application already knows the answer. When + linking statically, using gzdirect() will include all of the zlib code for + gzip file reading and decompression, which may not be desired.) +*/ + +ZEXTERN int ZEXPORT gzclose(gzFile file); +/* + Flush all pending output for file, if necessary, close file and + deallocate the (de)compression state. Note that once file is closed, you + cannot call gzerror with file, since its structures have been deallocated. + gzclose must not be called more than once on the same file, just as free + must not be called more than once on the same allocation. + + gzclose will return Z_STREAM_ERROR if file is not valid, Z_ERRNO on a + file operation error, Z_MEM_ERROR if out of memory, Z_BUF_ERROR if the + last read ended in the middle of a gzip stream, or Z_OK on success. +*/ + +ZEXTERN int ZEXPORT gzclose_r(gzFile file); +ZEXTERN int ZEXPORT gzclose_w(gzFile file); +/* + Same as gzclose(), but gzclose_r() is only for use when reading, and + gzclose_w() is only for use when writing or appending. The advantage to + using these instead of gzclose() is that they avoid linking in zlib + compression or decompression code that is not used when only reading or only + writing respectively. If gzclose() is used, then both compression and + decompression code will be included the application when linking to a static + zlib library. +*/ + +ZEXTERN const char * ZEXPORT gzerror(gzFile file, int *errnum); +/* + Return the error message for the last error which occurred on file. + errnum is set to zlib error number. If an error occurred in the file system + and not in the compression library, errnum is set to Z_ERRNO and the + application may consult errno to get the exact error code. + + The application must not modify the returned string. Future calls to + this function may invalidate the previously returned string. If file is + closed, then the string previously returned by gzerror will no longer be + available. + + gzerror() should be used to distinguish errors from end-of-file for those + functions above that do not distinguish those cases in their return values. +*/ + +ZEXTERN void ZEXPORT gzclearerr(gzFile file); +/* + Clear the error and end-of-file flags for file. This is analogous to the + clearerr() function in stdio. This is useful for continuing to read a gzip + file that is being written concurrently. +*/ + +#endif /* !Z_SOLO */ + + /* checksum functions */ + +/* + These functions are not related to compression but are exported + anyway because they might be useful in applications using the compression + library. +*/ + +ZEXTERN uLong ZEXPORT adler32(uLong adler, const Bytef *buf, uInt len); +/* + Update a running Adler-32 checksum with the bytes buf[0..len-1] and + return the updated checksum. An Adler-32 value is in the range of a 32-bit + unsigned integer. If buf is Z_NULL, this function returns the required + initial value for the checksum. + + An Adler-32 checksum is almost as reliable as a CRC-32 but can be computed + much faster. + + Usage example: + + uLong adler = adler32(0L, Z_NULL, 0); + + while (read_buffer(buffer, length) != EOF) { + adler = adler32(adler, buffer, length); + } + if (adler != original_adler) error(); +*/ + +ZEXTERN uLong ZEXPORT adler32_z(uLong adler, const Bytef *buf, + z_size_t len); +/* + Same as adler32(), but with a size_t length. +*/ + +/* +ZEXTERN uLong ZEXPORT adler32_combine(uLong adler1, uLong adler2, + z_off_t len2); + + Combine two Adler-32 checksums into one. For two sequences of bytes, seq1 + and seq2 with lengths len1 and len2, Adler-32 checksums were calculated for + each, adler1 and adler2. adler32_combine() returns the Adler-32 checksum of + seq1 and seq2 concatenated, requiring only adler1, adler2, and len2. Note + that the z_off_t type (like off_t) is a signed integer. If len2 is + negative, the result has no meaning or utility. +*/ + +ZEXTERN uLong ZEXPORT crc32(uLong crc, const Bytef *buf, uInt len); +/* + Update a running CRC-32 with the bytes buf[0..len-1] and return the + updated CRC-32. A CRC-32 value is in the range of a 32-bit unsigned integer. + If buf is Z_NULL, this function returns the required initial value for the + crc. Pre- and post-conditioning (one's complement) is performed within this + function so it shouldn't be done by the application. + + Usage example: + + uLong crc = crc32(0L, Z_NULL, 0); + + while (read_buffer(buffer, length) != EOF) { + crc = crc32(crc, buffer, length); + } + if (crc != original_crc) error(); +*/ + +ZEXTERN uLong ZEXPORT crc32_z(uLong crc, const Bytef *buf, + z_size_t len); +/* + Same as crc32(), but with a size_t length. +*/ + +/* +ZEXTERN uLong ZEXPORT crc32_combine(uLong crc1, uLong crc2, z_off_t len2); + + Combine two CRC-32 check values into one. For two sequences of bytes, + seq1 and seq2 with lengths len1 and len2, CRC-32 check values were + calculated for each, crc1 and crc2. crc32_combine() returns the CRC-32 + check value of seq1 and seq2 concatenated, requiring only crc1, crc2, and + len2. len2 must be non-negative. +*/ + +/* +ZEXTERN uLong ZEXPORT crc32_combine_gen(z_off_t len2); + + Return the operator corresponding to length len2, to be used with + crc32_combine_op(). len2 must be non-negative. +*/ + +ZEXTERN uLong ZEXPORT crc32_combine_op(uLong crc1, uLong crc2, uLong op); +/* + Give the same result as crc32_combine(), using op in place of len2. op is + is generated from len2 by crc32_combine_gen(). This will be faster than + crc32_combine() if the generated op is used more than once. +*/ + + + /* various hacks, don't look :) */ + +/* deflateInit and inflateInit are macros to allow checking the zlib version + * and the compiler's view of z_stream: + */ +ZEXTERN int ZEXPORT deflateInit_(z_streamp strm, int level, + const char *version, int stream_size); +ZEXTERN int ZEXPORT inflateInit_(z_streamp strm, + const char *version, int stream_size); +ZEXTERN int ZEXPORT deflateInit2_(z_streamp strm, int level, int method, + int windowBits, int memLevel, + int strategy, const char *version, + int stream_size); +ZEXTERN int ZEXPORT inflateInit2_(z_streamp strm, int windowBits, + const char *version, int stream_size); +ZEXTERN int ZEXPORT inflateBackInit_(z_streamp strm, int windowBits, + unsigned char FAR *window, + const char *version, + int stream_size); +#ifdef Z_PREFIX_SET +# define z_deflateInit(strm, level) \ + deflateInit_((strm), (level), ZLIB_VERSION, (int)sizeof(z_stream)) +# define z_inflateInit(strm) \ + inflateInit_((strm), ZLIB_VERSION, (int)sizeof(z_stream)) +# define z_deflateInit2(strm, level, method, windowBits, memLevel, strategy) \ + deflateInit2_((strm),(level),(method),(windowBits),(memLevel),\ + (strategy), ZLIB_VERSION, (int)sizeof(z_stream)) +# define z_inflateInit2(strm, windowBits) \ + inflateInit2_((strm), (windowBits), ZLIB_VERSION, \ + (int)sizeof(z_stream)) +# define z_inflateBackInit(strm, windowBits, window) \ + inflateBackInit_((strm), (windowBits), (window), \ + ZLIB_VERSION, (int)sizeof(z_stream)) +#else +# define deflateInit(strm, level) \ + deflateInit_((strm), (level), ZLIB_VERSION, (int)sizeof(z_stream)) +# define inflateInit(strm) \ + inflateInit_((strm), ZLIB_VERSION, (int)sizeof(z_stream)) +# define deflateInit2(strm, level, method, windowBits, memLevel, strategy) \ + deflateInit2_((strm),(level),(method),(windowBits),(memLevel),\ + (strategy), ZLIB_VERSION, (int)sizeof(z_stream)) +# define inflateInit2(strm, windowBits) \ + inflateInit2_((strm), (windowBits), ZLIB_VERSION, \ + (int)sizeof(z_stream)) +# define inflateBackInit(strm, windowBits, window) \ + inflateBackInit_((strm), (windowBits), (window), \ + ZLIB_VERSION, (int)sizeof(z_stream)) +#endif + +#ifndef Z_SOLO + +/* gzgetc() macro and its supporting function and exposed data structure. Note + * that the real internal state is much larger than the exposed structure. + * This abbreviated structure exposes just enough for the gzgetc() macro. The + * user should not mess with these exposed elements, since their names or + * behavior could change in the future, perhaps even capriciously. They can + * only be used by the gzgetc() macro. You have been warned. + */ +struct gzFile_s { + unsigned have; + unsigned char *next; + z_off64_t pos; +}; +ZEXTERN int ZEXPORT gzgetc_(gzFile file); /* backward compatibility */ +#ifdef Z_PREFIX_SET +# undef z_gzgetc +# define z_gzgetc(g) \ + ((g)->have ? ((g)->have--, (g)->pos++, *((g)->next)++) : (gzgetc)(g)) +#else +# define gzgetc(g) \ + ((g)->have ? ((g)->have--, (g)->pos++, *((g)->next)++) : (gzgetc)(g)) +#endif + +/* provide 64-bit offset functions if _LARGEFILE64_SOURCE defined, and/or + * change the regular functions to 64 bits if _FILE_OFFSET_BITS is 64 (if + * both are true, the application gets the *64 functions, and the regular + * functions are changed to 64 bits) -- in case these are set on systems + * without large file support, _LFS64_LARGEFILE must also be true + */ +#ifdef Z_LARGE64 + ZEXTERN gzFile ZEXPORT gzopen64(const char *, const char *); + ZEXTERN z_off64_t ZEXPORT gzseek64(gzFile, z_off64_t, int); + ZEXTERN z_off64_t ZEXPORT gztell64(gzFile); + ZEXTERN z_off64_t ZEXPORT gzoffset64(gzFile); + ZEXTERN uLong ZEXPORT adler32_combine64(uLong, uLong, z_off64_t); + ZEXTERN uLong ZEXPORT crc32_combine64(uLong, uLong, z_off64_t); + ZEXTERN uLong ZEXPORT crc32_combine_gen64(z_off64_t); +#endif + +#if !defined(ZLIB_INTERNAL) && defined(Z_WANT64) +# ifdef Z_PREFIX_SET +# define z_gzopen z_gzopen64 +# define z_gzseek z_gzseek64 +# define z_gztell z_gztell64 +# define z_gzoffset z_gzoffset64 +# define z_adler32_combine z_adler32_combine64 +# define z_crc32_combine z_crc32_combine64 +# define z_crc32_combine_gen z_crc32_combine_gen64 +# else +# define gzopen gzopen64 +# define gzseek gzseek64 +# define gztell gztell64 +# define gzoffset gzoffset64 +# define adler32_combine adler32_combine64 +# define crc32_combine crc32_combine64 +# define crc32_combine_gen crc32_combine_gen64 +# endif +# ifndef Z_LARGE64 + ZEXTERN gzFile ZEXPORT gzopen64(const char *, const char *); + ZEXTERN z_off_t ZEXPORT gzseek64(gzFile, z_off_t, int); + ZEXTERN z_off_t ZEXPORT gztell64(gzFile); + ZEXTERN z_off_t ZEXPORT gzoffset64(gzFile); + ZEXTERN uLong ZEXPORT adler32_combine64(uLong, uLong, z_off_t); + ZEXTERN uLong ZEXPORT crc32_combine64(uLong, uLong, z_off_t); + ZEXTERN uLong ZEXPORT crc32_combine_gen64(z_off_t); +# endif +#else + ZEXTERN gzFile ZEXPORT gzopen(const char *, const char *); + ZEXTERN z_off_t ZEXPORT gzseek(gzFile, z_off_t, int); + ZEXTERN z_off_t ZEXPORT gztell(gzFile); + ZEXTERN z_off_t ZEXPORT gzoffset(gzFile); + ZEXTERN uLong ZEXPORT adler32_combine(uLong, uLong, z_off_t); + ZEXTERN uLong ZEXPORT crc32_combine(uLong, uLong, z_off_t); + ZEXTERN uLong ZEXPORT crc32_combine_gen(z_off_t); +#endif + +#else /* Z_SOLO */ + + ZEXTERN uLong ZEXPORT adler32_combine(uLong, uLong, z_off_t); + ZEXTERN uLong ZEXPORT crc32_combine(uLong, uLong, z_off_t); + ZEXTERN uLong ZEXPORT crc32_combine_gen(z_off_t); + +#endif /* !Z_SOLO */ + +/* undocumented functions */ +ZEXTERN const char * ZEXPORT zError(int); +ZEXTERN int ZEXPORT inflateSyncPoint(z_streamp); +ZEXTERN const z_crc_t FAR * ZEXPORT get_crc_table(void); +ZEXTERN int ZEXPORT inflateUndermine(z_streamp, int); +ZEXTERN int ZEXPORT inflateValidate(z_streamp, int); +ZEXTERN unsigned long ZEXPORT inflateCodesUsed(z_streamp); +ZEXTERN int ZEXPORT inflateResetKeep(z_streamp); +ZEXTERN int ZEXPORT deflateResetKeep(z_streamp); +#if defined(_WIN32) && !defined(Z_SOLO) +ZEXTERN gzFile ZEXPORT gzopen_w(const wchar_t *path, + const char *mode); +#endif +#if defined(STDC) || defined(Z_HAVE_STDARG_H) +# ifndef Z_SOLO +ZEXTERN int ZEXPORTVA gzvprintf(gzFile file, + const char *format, + va_list va); +# endif +#endif + +#ifdef __cplusplus +} +#endif + +#endif /* ZLIB_H */ diff --git a/dependencies/linux64/include/zstd.h b/dependencies/linux64/include/zstd.h new file mode 100644 index 0000000..8504694 --- /dev/null +++ b/dependencies/linux64/include/zstd.h @@ -0,0 +1,3209 @@ +/* + * Copyright (c) Meta Platforms, Inc. and affiliates. + * All rights reserved. + * + * This source code is licensed under both the BSD-style license (found in the + * LICENSE file in the root directory of this source tree) and the GPLv2 (found + * in the COPYING file in the root directory of this source tree). + * You may select, at your option, one of the above-listed licenses. + */ + +#ifndef ZSTD_H_235446 +#define ZSTD_H_235446 + + +/* ====== Dependencies ======*/ +#include /* size_t */ + +#include "zstd_errors.h" /* list of errors */ +#if defined(ZSTD_STATIC_LINKING_ONLY) && !defined(ZSTD_H_ZSTD_STATIC_LINKING_ONLY) +#include /* INT_MAX */ +#endif /* ZSTD_STATIC_LINKING_ONLY */ + +#if defined (__cplusplus) +extern "C" { +#endif + +/* ===== ZSTDLIB_API : control library symbols visibility ===== */ +#ifndef ZSTDLIB_VISIBLE + /* Backwards compatibility with old macro name */ +# ifdef ZSTDLIB_VISIBILITY +# define ZSTDLIB_VISIBLE ZSTDLIB_VISIBILITY +# elif defined(__GNUC__) && (__GNUC__ >= 4) && !defined(__MINGW32__) +# define ZSTDLIB_VISIBLE __attribute__ ((visibility ("default"))) +# else +# define ZSTDLIB_VISIBLE +# endif +#endif + +#ifndef ZSTDLIB_HIDDEN +# if defined(__GNUC__) && (__GNUC__ >= 4) && !defined(__MINGW32__) +# define ZSTDLIB_HIDDEN __attribute__ ((visibility ("hidden"))) +# else +# define ZSTDLIB_HIDDEN +# endif +#endif + +#if defined(ZSTD_DLL_EXPORT) && (ZSTD_DLL_EXPORT==1) +# define ZSTDLIB_API __declspec(dllexport) ZSTDLIB_VISIBLE +#elif defined(ZSTD_DLL_IMPORT) && (ZSTD_DLL_IMPORT==1) +# define ZSTDLIB_API __declspec(dllimport) ZSTDLIB_VISIBLE /* It isn't required but allows to generate better code, saving a function pointer load from the IAT and an indirect jump.*/ +#else +# define ZSTDLIB_API ZSTDLIB_VISIBLE +#endif + +/* Deprecation warnings : + * Should these warnings be a problem, it is generally possible to disable them, + * typically with -Wno-deprecated-declarations for gcc or _CRT_SECURE_NO_WARNINGS in Visual. + * Otherwise, it's also possible to define ZSTD_DISABLE_DEPRECATE_WARNINGS. + */ +#ifdef ZSTD_DISABLE_DEPRECATE_WARNINGS +# define ZSTD_DEPRECATED(message) /* disable deprecation warnings */ +#else +# if defined (__cplusplus) && (__cplusplus >= 201402) /* C++14 or greater */ +# define ZSTD_DEPRECATED(message) [[deprecated(message)]] +# elif (defined(GNUC) && (GNUC > 4 || (GNUC == 4 && GNUC_MINOR >= 5))) || defined(__clang__) || defined(__IAR_SYSTEMS_ICC__) +# define ZSTD_DEPRECATED(message) __attribute__((deprecated(message))) +# elif defined(__GNUC__) && (__GNUC__ >= 3) +# define ZSTD_DEPRECATED(message) __attribute__((deprecated)) +# elif defined(_MSC_VER) +# define ZSTD_DEPRECATED(message) __declspec(deprecated(message)) +# else +# pragma message("WARNING: You need to implement ZSTD_DEPRECATED for this compiler") +# define ZSTD_DEPRECATED(message) +# endif +#endif /* ZSTD_DISABLE_DEPRECATE_WARNINGS */ + + +/******************************************************************************* + Introduction + + zstd, short for Zstandard, is a fast lossless compression algorithm, targeting + real-time compression scenarios at zlib-level and better compression ratios. + The zstd compression library provides in-memory compression and decompression + functions. + + The library supports regular compression levels from 1 up to ZSTD_maxCLevel(), + which is currently 22. Levels >= 20, labeled `--ultra`, should be used with + caution, as they require more memory. The library also offers negative + compression levels, which extend the range of speed vs. ratio preferences. + The lower the level, the faster the speed (at the cost of compression). + + Compression can be done in: + - a single step (described as Simple API) + - a single step, reusing a context (described as Explicit context) + - unbounded multiple steps (described as Streaming compression) + + The compression ratio achievable on small data can be highly improved using + a dictionary. Dictionary compression can be performed in: + - a single step (described as Simple dictionary API) + - a single step, reusing a dictionary (described as Bulk-processing + dictionary API) + + Advanced experimental functions can be accessed using + `#define ZSTD_STATIC_LINKING_ONLY` before including zstd.h. + + Advanced experimental APIs should never be used with a dynamically-linked + library. They are not "stable"; their definitions or signatures may change in + the future. Only static linking is allowed. +*******************************************************************************/ + +/*------ Version ------*/ +#define ZSTD_VERSION_MAJOR 1 +#define ZSTD_VERSION_MINOR 5 +#define ZSTD_VERSION_RELEASE 8 +#define ZSTD_VERSION_NUMBER (ZSTD_VERSION_MAJOR *100*100 + ZSTD_VERSION_MINOR *100 + ZSTD_VERSION_RELEASE) + +/*! ZSTD_versionNumber() : + * Return runtime library version, the value is (MAJOR*100*100 + MINOR*100 + RELEASE). */ +ZSTDLIB_API unsigned ZSTD_versionNumber(void); + +#define ZSTD_LIB_VERSION ZSTD_VERSION_MAJOR.ZSTD_VERSION_MINOR.ZSTD_VERSION_RELEASE +#define ZSTD_QUOTE(str) #str +#define ZSTD_EXPAND_AND_QUOTE(str) ZSTD_QUOTE(str) +#define ZSTD_VERSION_STRING ZSTD_EXPAND_AND_QUOTE(ZSTD_LIB_VERSION) + +/*! ZSTD_versionString() : + * Return runtime library version, like "1.4.5". Requires v1.3.0+. */ +ZSTDLIB_API const char* ZSTD_versionString(void); + +/* ************************************* + * Default constant + ***************************************/ +#ifndef ZSTD_CLEVEL_DEFAULT +# define ZSTD_CLEVEL_DEFAULT 3 +#endif + +/* ************************************* + * Constants + ***************************************/ + +/* All magic numbers are supposed read/written to/from files/memory using little-endian convention */ +#define ZSTD_MAGICNUMBER 0xFD2FB528 /* valid since v0.8.0 */ +#define ZSTD_MAGIC_DICTIONARY 0xEC30A437 /* valid since v0.7.0 */ +#define ZSTD_MAGIC_SKIPPABLE_START 0x184D2A50 /* all 16 values, from 0x184D2A50 to 0x184D2A5F, signal the beginning of a skippable frame */ +#define ZSTD_MAGIC_SKIPPABLE_MASK 0xFFFFFFF0 + +#define ZSTD_BLOCKSIZELOG_MAX 17 +#define ZSTD_BLOCKSIZE_MAX (1<= ZSTD_compressBound(srcSize)` guarantees that zstd will have + * enough space to successfully compress the data. + * @return : compressed size written into `dst` (<= `dstCapacity), + * or an error code if it fails (which can be tested using ZSTD_isError()). */ +ZSTDLIB_API size_t ZSTD_compress( void* dst, size_t dstCapacity, + const void* src, size_t srcSize, + int compressionLevel); + +/*! ZSTD_decompress() : + * `compressedSize` : must be the _exact_ size of some number of compressed and/or skippable frames. + * Multiple compressed frames can be decompressed at once with this method. + * The result will be the concatenation of all decompressed frames, back to back. + * `dstCapacity` is an upper bound of originalSize to regenerate. + * First frame's decompressed size can be extracted using ZSTD_getFrameContentSize(). + * If maximum upper bound isn't known, prefer using streaming mode to decompress data. + * @return : the number of bytes decompressed into `dst` (<= `dstCapacity`), + * or an errorCode if it fails (which can be tested using ZSTD_isError()). */ +ZSTDLIB_API size_t ZSTD_decompress( void* dst, size_t dstCapacity, + const void* src, size_t compressedSize); + + +/*====== Decompression helper functions ======*/ + +/*! ZSTD_getFrameContentSize() : requires v1.3.0+ + * `src` should point to the start of a ZSTD encoded frame. + * `srcSize` must be at least as large as the frame header. + * hint : any size >= `ZSTD_frameHeaderSize_max` is large enough. + * @return : - decompressed size of `src` frame content, if known + * - ZSTD_CONTENTSIZE_UNKNOWN if the size cannot be determined + * - ZSTD_CONTENTSIZE_ERROR if an error occurred (e.g. invalid magic number, srcSize too small) + * note 1 : a 0 return value means the frame is valid but "empty". + * When invoking this method on a skippable frame, it will return 0. + * note 2 : decompressed size is an optional field, it may not be present (typically in streaming mode). + * When `return==ZSTD_CONTENTSIZE_UNKNOWN`, data to decompress could be any size. + * In which case, it's necessary to use streaming mode to decompress data. + * Optionally, application can rely on some implicit limit, + * as ZSTD_decompress() only needs an upper bound of decompressed size. + * (For example, data could be necessarily cut into blocks <= 16 KB). + * note 3 : decompressed size is always present when compression is completed using single-pass functions, + * such as ZSTD_compress(), ZSTD_compressCCtx() ZSTD_compress_usingDict() or ZSTD_compress_usingCDict(). + * note 4 : decompressed size can be very large (64-bits value), + * potentially larger than what local system can handle as a single memory segment. + * In which case, it's necessary to use streaming mode to decompress data. + * note 5 : If source is untrusted, decompressed size could be wrong or intentionally modified. + * Always ensure return value fits within application's authorized limits. + * Each application can set its own limits. + * note 6 : This function replaces ZSTD_getDecompressedSize() */ +#define ZSTD_CONTENTSIZE_UNKNOWN (0ULL - 1) +#define ZSTD_CONTENTSIZE_ERROR (0ULL - 2) +ZSTDLIB_API unsigned long long ZSTD_getFrameContentSize(const void *src, size_t srcSize); + +/*! ZSTD_getDecompressedSize() (obsolete): + * This function is now obsolete, in favor of ZSTD_getFrameContentSize(). + * Both functions work the same way, but ZSTD_getDecompressedSize() blends + * "empty", "unknown" and "error" results to the same return value (0), + * while ZSTD_getFrameContentSize() gives them separate return values. + * @return : decompressed size of `src` frame content _if known and not empty_, 0 otherwise. */ +ZSTD_DEPRECATED("Replaced by ZSTD_getFrameContentSize") +ZSTDLIB_API unsigned long long ZSTD_getDecompressedSize(const void* src, size_t srcSize); + +/*! ZSTD_findFrameCompressedSize() : Requires v1.4.0+ + * `src` should point to the start of a ZSTD frame or skippable frame. + * `srcSize` must be >= first frame size + * @return : the compressed size of the first frame starting at `src`, + * suitable to pass as `srcSize` to `ZSTD_decompress` or similar, + * or an error code if input is invalid + * Note 1: this method is called _find*() because it's not enough to read the header, + * it may have to scan through the frame's content, to reach its end. + * Note 2: this method also works with Skippable Frames. In which case, + * it returns the size of the complete skippable frame, + * which is always equal to its content size + 8 bytes for headers. */ +ZSTDLIB_API size_t ZSTD_findFrameCompressedSize(const void* src, size_t srcSize); + + +/*====== Compression helper functions ======*/ + +/*! ZSTD_compressBound() : + * maximum compressed size in worst case single-pass scenario. + * When invoking `ZSTD_compress()`, or any other one-pass compression function, + * it's recommended to provide @dstCapacity >= ZSTD_compressBound(srcSize) + * as it eliminates one potential failure scenario, + * aka not enough room in dst buffer to write the compressed frame. + * Note : ZSTD_compressBound() itself can fail, if @srcSize >= ZSTD_MAX_INPUT_SIZE . + * In which case, ZSTD_compressBound() will return an error code + * which can be tested using ZSTD_isError(). + * + * ZSTD_COMPRESSBOUND() : + * same as ZSTD_compressBound(), but as a macro. + * It can be used to produce constants, which can be useful for static allocation, + * for example to size a static array on stack. + * Will produce constant value 0 if srcSize is too large. + */ +#define ZSTD_MAX_INPUT_SIZE ((sizeof(size_t)==8) ? 0xFF00FF00FF00FF00ULL : 0xFF00FF00U) +#define ZSTD_COMPRESSBOUND(srcSize) (((size_t)(srcSize) >= ZSTD_MAX_INPUT_SIZE) ? 0 : (srcSize) + ((srcSize)>>8) + (((srcSize) < (128<<10)) ? (((128<<10) - (srcSize)) >> 11) /* margin, from 64 to 0 */ : 0)) /* this formula ensures that bound(A) + bound(B) <= bound(A+B) as long as A and B >= 128 KB */ +ZSTDLIB_API size_t ZSTD_compressBound(size_t srcSize); /*!< maximum compressed size in worst case single-pass scenario */ + + +/*====== Error helper functions ======*/ +/* ZSTD_isError() : + * Most ZSTD_* functions returning a size_t value can be tested for error, + * using ZSTD_isError(). + * @return 1 if error, 0 otherwise + */ +ZSTDLIB_API unsigned ZSTD_isError(size_t result); /*!< tells if a `size_t` function result is an error code */ +ZSTDLIB_API ZSTD_ErrorCode ZSTD_getErrorCode(size_t functionResult); /* convert a result into an error code, which can be compared to error enum list */ +ZSTDLIB_API const char* ZSTD_getErrorName(size_t result); /*!< provides readable string from a function result */ +ZSTDLIB_API int ZSTD_minCLevel(void); /*!< minimum negative compression level allowed, requires v1.4.0+ */ +ZSTDLIB_API int ZSTD_maxCLevel(void); /*!< maximum compression level available */ +ZSTDLIB_API int ZSTD_defaultCLevel(void); /*!< default compression level, specified by ZSTD_CLEVEL_DEFAULT, requires v1.5.0+ */ + + +/*************************************** +* Explicit context +***************************************/ +/*= Compression context + * When compressing many times, + * it is recommended to allocate a compression context just once, + * and reuse it for each successive compression operation. + * This will make the workload easier for system's memory. + * Note : re-using context is just a speed / resource optimization. + * It doesn't change the compression ratio, which remains identical. + * Note 2: For parallel execution in multi-threaded environments, + * use one different context per thread . + */ +typedef struct ZSTD_CCtx_s ZSTD_CCtx; +ZSTDLIB_API ZSTD_CCtx* ZSTD_createCCtx(void); +ZSTDLIB_API size_t ZSTD_freeCCtx(ZSTD_CCtx* cctx); /* compatible with NULL pointer */ + +/*! ZSTD_compressCCtx() : + * Same as ZSTD_compress(), using an explicit ZSTD_CCtx. + * Important : in order to mirror `ZSTD_compress()` behavior, + * this function compresses at the requested compression level, + * __ignoring any other advanced parameter__ . + * If any advanced parameter was set using the advanced API, + * they will all be reset. Only @compressionLevel remains. + */ +ZSTDLIB_API size_t ZSTD_compressCCtx(ZSTD_CCtx* cctx, + void* dst, size_t dstCapacity, + const void* src, size_t srcSize, + int compressionLevel); + +/*= Decompression context + * When decompressing many times, + * it is recommended to allocate a context only once, + * and reuse it for each successive compression operation. + * This will make workload friendlier for system's memory. + * Use one context per thread for parallel execution. */ +typedef struct ZSTD_DCtx_s ZSTD_DCtx; +ZSTDLIB_API ZSTD_DCtx* ZSTD_createDCtx(void); +ZSTDLIB_API size_t ZSTD_freeDCtx(ZSTD_DCtx* dctx); /* accept NULL pointer */ + +/*! ZSTD_decompressDCtx() : + * Same as ZSTD_decompress(), + * requires an allocated ZSTD_DCtx. + * Compatible with sticky parameters (see below). + */ +ZSTDLIB_API size_t ZSTD_decompressDCtx(ZSTD_DCtx* dctx, + void* dst, size_t dstCapacity, + const void* src, size_t srcSize); + + +/********************************************* +* Advanced compression API (Requires v1.4.0+) +**********************************************/ + +/* API design : + * Parameters are pushed one by one into an existing context, + * using ZSTD_CCtx_set*() functions. + * Pushed parameters are sticky : they are valid for next compressed frame, and any subsequent frame. + * "sticky" parameters are applicable to `ZSTD_compress2()` and `ZSTD_compressStream*()` ! + * __They do not apply to one-shot variants such as ZSTD_compressCCtx()__ . + * + * It's possible to reset all parameters to "default" using ZSTD_CCtx_reset(). + * + * This API supersedes all other "advanced" API entry points in the experimental section. + * In the future, we expect to remove API entry points from experimental which are redundant with this API. + */ + + +/* Compression strategies, listed from fastest to strongest */ +typedef enum { ZSTD_fast=1, + ZSTD_dfast=2, + ZSTD_greedy=3, + ZSTD_lazy=4, + ZSTD_lazy2=5, + ZSTD_btlazy2=6, + ZSTD_btopt=7, + ZSTD_btultra=8, + ZSTD_btultra2=9 + /* note : new strategies _might_ be added in the future. + Only the order (from fast to strong) is guaranteed */ +} ZSTD_strategy; + +typedef enum { + + /* compression parameters + * Note: When compressing with a ZSTD_CDict these parameters are superseded + * by the parameters used to construct the ZSTD_CDict. + * See ZSTD_CCtx_refCDict() for more info (superseded-by-cdict). */ + ZSTD_c_compressionLevel=100, /* Set compression parameters according to pre-defined cLevel table. + * Note that exact compression parameters are dynamically determined, + * depending on both compression level and srcSize (when known). + * Default level is ZSTD_CLEVEL_DEFAULT==3. + * Special: value 0 means default, which is controlled by ZSTD_CLEVEL_DEFAULT. + * Note 1 : it's possible to pass a negative compression level. + * Note 2 : setting a level does not automatically set all other compression parameters + * to default. Setting this will however eventually dynamically impact the compression + * parameters which have not been manually set. The manually set + * ones will 'stick'. */ + /* Advanced compression parameters : + * It's possible to pin down compression parameters to some specific values. + * In which case, these values are no longer dynamically selected by the compressor */ + ZSTD_c_windowLog=101, /* Maximum allowed back-reference distance, expressed as power of 2. + * This will set a memory budget for streaming decompression, + * with larger values requiring more memory + * and typically compressing more. + * Must be clamped between ZSTD_WINDOWLOG_MIN and ZSTD_WINDOWLOG_MAX. + * Special: value 0 means "use default windowLog". + * Note: Using a windowLog greater than ZSTD_WINDOWLOG_LIMIT_DEFAULT + * requires explicitly allowing such size at streaming decompression stage. */ + ZSTD_c_hashLog=102, /* Size of the initial probe table, as a power of 2. + * Resulting memory usage is (1 << (hashLog+2)). + * Must be clamped between ZSTD_HASHLOG_MIN and ZSTD_HASHLOG_MAX. + * Larger tables improve compression ratio of strategies <= dFast, + * and improve speed of strategies > dFast. + * Special: value 0 means "use default hashLog". */ + ZSTD_c_chainLog=103, /* Size of the multi-probe search table, as a power of 2. + * Resulting memory usage is (1 << (chainLog+2)). + * Must be clamped between ZSTD_CHAINLOG_MIN and ZSTD_CHAINLOG_MAX. + * Larger tables result in better and slower compression. + * This parameter is useless for "fast" strategy. + * It's still useful when using "dfast" strategy, + * in which case it defines a secondary probe table. + * Special: value 0 means "use default chainLog". */ + ZSTD_c_searchLog=104, /* Number of search attempts, as a power of 2. + * More attempts result in better and slower compression. + * This parameter is useless for "fast" and "dFast" strategies. + * Special: value 0 means "use default searchLog". */ + ZSTD_c_minMatch=105, /* Minimum size of searched matches. + * Note that Zstandard can still find matches of smaller size, + * it just tweaks its search algorithm to look for this size and larger. + * Larger values increase compression and decompression speed, but decrease ratio. + * Must be clamped between ZSTD_MINMATCH_MIN and ZSTD_MINMATCH_MAX. + * Note that currently, for all strategies < btopt, effective minimum is 4. + * , for all strategies > fast, effective maximum is 6. + * Special: value 0 means "use default minMatchLength". */ + ZSTD_c_targetLength=106, /* Impact of this field depends on strategy. + * For strategies btopt, btultra & btultra2: + * Length of Match considered "good enough" to stop search. + * Larger values make compression stronger, and slower. + * For strategy fast: + * Distance between match sampling. + * Larger values make compression faster, and weaker. + * Special: value 0 means "use default targetLength". */ + ZSTD_c_strategy=107, /* See ZSTD_strategy enum definition. + * The higher the value of selected strategy, the more complex it is, + * resulting in stronger and slower compression. + * Special: value 0 means "use default strategy". */ + + ZSTD_c_targetCBlockSize=130, /* v1.5.6+ + * Attempts to fit compressed block size into approximately targetCBlockSize. + * Bound by ZSTD_TARGETCBLOCKSIZE_MIN and ZSTD_TARGETCBLOCKSIZE_MAX. + * Note that it's not a guarantee, just a convergence target (default:0). + * No target when targetCBlockSize == 0. + * This is helpful in low bandwidth streaming environments to improve end-to-end latency, + * when a client can make use of partial documents (a prominent example being Chrome). + * Note: this parameter is stable since v1.5.6. + * It was present as an experimental parameter in earlier versions, + * but it's not recommended using it with earlier library versions + * due to massive performance regressions. + */ + /* LDM mode parameters */ + ZSTD_c_enableLongDistanceMatching=160, /* Enable long distance matching. + * This parameter is designed to improve compression ratio + * for large inputs, by finding large matches at long distance. + * It increases memory usage and window size. + * Note: enabling this parameter increases default ZSTD_c_windowLog to 128 MB + * except when expressly set to a different value. + * Note: will be enabled by default if ZSTD_c_windowLog >= 128 MB and + * compression strategy >= ZSTD_btopt (== compression level 16+) */ + ZSTD_c_ldmHashLog=161, /* Size of the table for long distance matching, as a power of 2. + * Larger values increase memory usage and compression ratio, + * but decrease compression speed. + * Must be clamped between ZSTD_HASHLOG_MIN and ZSTD_HASHLOG_MAX + * default: windowlog - 7. + * Special: value 0 means "automatically determine hashlog". */ + ZSTD_c_ldmMinMatch=162, /* Minimum match size for long distance matcher. + * Larger/too small values usually decrease compression ratio. + * Must be clamped between ZSTD_LDM_MINMATCH_MIN and ZSTD_LDM_MINMATCH_MAX. + * Special: value 0 means "use default value" (default: 64). */ + ZSTD_c_ldmBucketSizeLog=163, /* Log size of each bucket in the LDM hash table for collision resolution. + * Larger values improve collision resolution but decrease compression speed. + * The maximum value is ZSTD_LDM_BUCKETSIZELOG_MAX. + * Special: value 0 means "use default value" (default: 3). */ + ZSTD_c_ldmHashRateLog=164, /* Frequency of inserting/looking up entries into the LDM hash table. + * Must be clamped between 0 and (ZSTD_WINDOWLOG_MAX - ZSTD_HASHLOG_MIN). + * Default is MAX(0, (windowLog - ldmHashLog)), optimizing hash table usage. + * Larger values improve compression speed. + * Deviating far from default value will likely result in a compression ratio decrease. + * Special: value 0 means "automatically determine hashRateLog". */ + + /* frame parameters */ + ZSTD_c_contentSizeFlag=200, /* Content size will be written into frame header _whenever known_ (default:1) + * Content size must be known at the beginning of compression. + * This is automatically the case when using ZSTD_compress2(), + * For streaming scenarios, content size must be provided with ZSTD_CCtx_setPledgedSrcSize() */ + ZSTD_c_checksumFlag=201, /* A 32-bits checksum of content is written at end of frame (default:0) */ + ZSTD_c_dictIDFlag=202, /* When applicable, dictionary's ID is written into frame header (default:1) */ + + /* multi-threading parameters */ + /* These parameters are only active if multi-threading is enabled (compiled with build macro ZSTD_MULTITHREAD). + * Otherwise, trying to set any other value than default (0) will be a no-op and return an error. + * In a situation where it's unknown if the linked library supports multi-threading or not, + * setting ZSTD_c_nbWorkers to any value >= 1 and consulting the return value provides a quick way to check this property. + */ + ZSTD_c_nbWorkers=400, /* Select how many threads will be spawned to compress in parallel. + * When nbWorkers >= 1, triggers asynchronous mode when invoking ZSTD_compressStream*() : + * ZSTD_compressStream*() consumes input and flush output if possible, but immediately gives back control to caller, + * while compression is performed in parallel, within worker thread(s). + * (note : a strong exception to this rule is when first invocation of ZSTD_compressStream2() sets ZSTD_e_end : + * in which case, ZSTD_compressStream2() delegates to ZSTD_compress2(), which is always a blocking call). + * More workers improve speed, but also increase memory usage. + * Default value is `0`, aka "single-threaded mode" : no worker is spawned, + * compression is performed inside Caller's thread, and all invocations are blocking */ + ZSTD_c_jobSize=401, /* Size of a compression job. This value is enforced only when nbWorkers >= 1. + * Each compression job is completed in parallel, so this value can indirectly impact the nb of active threads. + * 0 means default, which is dynamically determined based on compression parameters. + * Job size must be a minimum of overlap size, or ZSTDMT_JOBSIZE_MIN (= 512 KB), whichever is largest. + * The minimum size is automatically and transparently enforced. */ + ZSTD_c_overlapLog=402, /* Control the overlap size, as a fraction of window size. + * The overlap size is an amount of data reloaded from previous job at the beginning of a new job. + * It helps preserve compression ratio, while each job is compressed in parallel. + * This value is enforced only when nbWorkers >= 1. + * Larger values increase compression ratio, but decrease speed. + * Possible values range from 0 to 9 : + * - 0 means "default" : value will be determined by the library, depending on strategy + * - 1 means "no overlap" + * - 9 means "full overlap", using a full window size. + * Each intermediate rank increases/decreases load size by a factor 2 : + * 9: full window; 8: w/2; 7: w/4; 6: w/8; 5:w/16; 4: w/32; 3:w/64; 2:w/128; 1:no overlap; 0:default + * default value varies between 6 and 9, depending on strategy */ + + /* note : additional experimental parameters are also available + * within the experimental section of the API. + * At the time of this writing, they include : + * ZSTD_c_rsyncable + * ZSTD_c_format + * ZSTD_c_forceMaxWindow + * ZSTD_c_forceAttachDict + * ZSTD_c_literalCompressionMode + * ZSTD_c_srcSizeHint + * ZSTD_c_enableDedicatedDictSearch + * ZSTD_c_stableInBuffer + * ZSTD_c_stableOutBuffer + * ZSTD_c_blockDelimiters + * ZSTD_c_validateSequences + * ZSTD_c_blockSplitterLevel + * ZSTD_c_splitAfterSequences + * ZSTD_c_useRowMatchFinder + * ZSTD_c_prefetchCDictTables + * ZSTD_c_enableSeqProducerFallback + * ZSTD_c_maxBlockSize + * Because they are not stable, it's necessary to define ZSTD_STATIC_LINKING_ONLY to access them. + * note : never ever use experimentalParam? names directly; + * also, the enums values themselves are unstable and can still change. + */ + ZSTD_c_experimentalParam1=500, + ZSTD_c_experimentalParam2=10, + ZSTD_c_experimentalParam3=1000, + ZSTD_c_experimentalParam4=1001, + ZSTD_c_experimentalParam5=1002, + /* was ZSTD_c_experimentalParam6=1003; is now ZSTD_c_targetCBlockSize */ + ZSTD_c_experimentalParam7=1004, + ZSTD_c_experimentalParam8=1005, + ZSTD_c_experimentalParam9=1006, + ZSTD_c_experimentalParam10=1007, + ZSTD_c_experimentalParam11=1008, + ZSTD_c_experimentalParam12=1009, + ZSTD_c_experimentalParam13=1010, + ZSTD_c_experimentalParam14=1011, + ZSTD_c_experimentalParam15=1012, + ZSTD_c_experimentalParam16=1013, + ZSTD_c_experimentalParam17=1014, + ZSTD_c_experimentalParam18=1015, + ZSTD_c_experimentalParam19=1016, + ZSTD_c_experimentalParam20=1017 +} ZSTD_cParameter; + +typedef struct { + size_t error; + int lowerBound; + int upperBound; +} ZSTD_bounds; + +/*! ZSTD_cParam_getBounds() : + * All parameters must belong to an interval with lower and upper bounds, + * otherwise they will either trigger an error or be automatically clamped. + * @return : a structure, ZSTD_bounds, which contains + * - an error status field, which must be tested using ZSTD_isError() + * - lower and upper bounds, both inclusive + */ +ZSTDLIB_API ZSTD_bounds ZSTD_cParam_getBounds(ZSTD_cParameter cParam); + +/*! ZSTD_CCtx_setParameter() : + * Set one compression parameter, selected by enum ZSTD_cParameter. + * All parameters have valid bounds. Bounds can be queried using ZSTD_cParam_getBounds(). + * Providing a value beyond bound will either clamp it, or trigger an error (depending on parameter). + * Setting a parameter is generally only possible during frame initialization (before starting compression). + * Exception : when using multi-threading mode (nbWorkers >= 1), + * the following parameters can be updated _during_ compression (within same frame): + * => compressionLevel, hashLog, chainLog, searchLog, minMatch, targetLength and strategy. + * new parameters will be active for next job only (after a flush()). + * @return : an error code (which can be tested using ZSTD_isError()). + */ +ZSTDLIB_API size_t ZSTD_CCtx_setParameter(ZSTD_CCtx* cctx, ZSTD_cParameter param, int value); + +/*! ZSTD_CCtx_setPledgedSrcSize() : + * Total input data size to be compressed as a single frame. + * Value will be written in frame header, unless if explicitly forbidden using ZSTD_c_contentSizeFlag. + * This value will also be controlled at end of frame, and trigger an error if not respected. + * @result : 0, or an error code (which can be tested with ZSTD_isError()). + * Note 1 : pledgedSrcSize==0 actually means zero, aka an empty frame. + * In order to mean "unknown content size", pass constant ZSTD_CONTENTSIZE_UNKNOWN. + * ZSTD_CONTENTSIZE_UNKNOWN is default value for any new frame. + * Note 2 : pledgedSrcSize is only valid once, for the next frame. + * It's discarded at the end of the frame, and replaced by ZSTD_CONTENTSIZE_UNKNOWN. + * Note 3 : Whenever all input data is provided and consumed in a single round, + * for example with ZSTD_compress2(), + * or invoking immediately ZSTD_compressStream2(,,,ZSTD_e_end), + * this value is automatically overridden by srcSize instead. + */ +ZSTDLIB_API size_t ZSTD_CCtx_setPledgedSrcSize(ZSTD_CCtx* cctx, unsigned long long pledgedSrcSize); + +typedef enum { + ZSTD_reset_session_only = 1, + ZSTD_reset_parameters = 2, + ZSTD_reset_session_and_parameters = 3 +} ZSTD_ResetDirective; + +/*! ZSTD_CCtx_reset() : + * There are 2 different things that can be reset, independently or jointly : + * - The session : will stop compressing current frame, and make CCtx ready to start a new one. + * Useful after an error, or to interrupt any ongoing compression. + * Any internal data not yet flushed is cancelled. + * Compression parameters and dictionary remain unchanged. + * They will be used to compress next frame. + * Resetting session never fails. + * - The parameters : changes all parameters back to "default". + * This also removes any reference to any dictionary or external sequence producer. + * Parameters can only be changed between 2 sessions (i.e. no compression is currently ongoing) + * otherwise the reset fails, and function returns an error value (which can be tested using ZSTD_isError()) + * - Both : similar to resetting the session, followed by resetting parameters. + */ +ZSTDLIB_API size_t ZSTD_CCtx_reset(ZSTD_CCtx* cctx, ZSTD_ResetDirective reset); + +/*! ZSTD_compress2() : + * Behave the same as ZSTD_compressCCtx(), but compression parameters are set using the advanced API. + * (note that this entry point doesn't even expose a compression level parameter). + * ZSTD_compress2() always starts a new frame. + * Should cctx hold data from a previously unfinished frame, everything about it is forgotten. + * - Compression parameters are pushed into CCtx before starting compression, using ZSTD_CCtx_set*() + * - The function is always blocking, returns when compression is completed. + * NOTE: Providing `dstCapacity >= ZSTD_compressBound(srcSize)` guarantees that zstd will have + * enough space to successfully compress the data, though it is possible it fails for other reasons. + * @return : compressed size written into `dst` (<= `dstCapacity), + * or an error code if it fails (which can be tested using ZSTD_isError()). + */ +ZSTDLIB_API size_t ZSTD_compress2( ZSTD_CCtx* cctx, + void* dst, size_t dstCapacity, + const void* src, size_t srcSize); + + +/*********************************************** +* Advanced decompression API (Requires v1.4.0+) +************************************************/ + +/* The advanced API pushes parameters one by one into an existing DCtx context. + * Parameters are sticky, and remain valid for all following frames + * using the same DCtx context. + * It's possible to reset parameters to default values using ZSTD_DCtx_reset(). + * Note : This API is compatible with existing ZSTD_decompressDCtx() and ZSTD_decompressStream(). + * Therefore, no new decompression function is necessary. + */ + +typedef enum { + + ZSTD_d_windowLogMax=100, /* Select a size limit (in power of 2) beyond which + * the streaming API will refuse to allocate memory buffer + * in order to protect the host from unreasonable memory requirements. + * This parameter is only useful in streaming mode, since no internal buffer is allocated in single-pass mode. + * By default, a decompression context accepts window sizes <= (1 << ZSTD_WINDOWLOG_LIMIT_DEFAULT). + * Special: value 0 means "use default maximum windowLog". */ + + /* note : additional experimental parameters are also available + * within the experimental section of the API. + * At the time of this writing, they include : + * ZSTD_d_format + * ZSTD_d_stableOutBuffer + * ZSTD_d_forceIgnoreChecksum + * ZSTD_d_refMultipleDDicts + * ZSTD_d_disableHuffmanAssembly + * ZSTD_d_maxBlockSize + * Because they are not stable, it's necessary to define ZSTD_STATIC_LINKING_ONLY to access them. + * note : never ever use experimentalParam? names directly + */ + ZSTD_d_experimentalParam1=1000, + ZSTD_d_experimentalParam2=1001, + ZSTD_d_experimentalParam3=1002, + ZSTD_d_experimentalParam4=1003, + ZSTD_d_experimentalParam5=1004, + ZSTD_d_experimentalParam6=1005 + +} ZSTD_dParameter; + +/*! ZSTD_dParam_getBounds() : + * All parameters must belong to an interval with lower and upper bounds, + * otherwise they will either trigger an error or be automatically clamped. + * @return : a structure, ZSTD_bounds, which contains + * - an error status field, which must be tested using ZSTD_isError() + * - both lower and upper bounds, inclusive + */ +ZSTDLIB_API ZSTD_bounds ZSTD_dParam_getBounds(ZSTD_dParameter dParam); + +/*! ZSTD_DCtx_setParameter() : + * Set one compression parameter, selected by enum ZSTD_dParameter. + * All parameters have valid bounds. Bounds can be queried using ZSTD_dParam_getBounds(). + * Providing a value beyond bound will either clamp it, or trigger an error (depending on parameter). + * Setting a parameter is only possible during frame initialization (before starting decompression). + * @return : 0, or an error code (which can be tested using ZSTD_isError()). + */ +ZSTDLIB_API size_t ZSTD_DCtx_setParameter(ZSTD_DCtx* dctx, ZSTD_dParameter param, int value); + +/*! ZSTD_DCtx_reset() : + * Return a DCtx to clean state. + * Session and parameters can be reset jointly or separately. + * Parameters can only be reset when no active frame is being decompressed. + * @return : 0, or an error code, which can be tested with ZSTD_isError() + */ +ZSTDLIB_API size_t ZSTD_DCtx_reset(ZSTD_DCtx* dctx, ZSTD_ResetDirective reset); + + +/**************************** +* Streaming +****************************/ + +typedef struct ZSTD_inBuffer_s { + const void* src; /**< start of input buffer */ + size_t size; /**< size of input buffer */ + size_t pos; /**< position where reading stopped. Will be updated. Necessarily 0 <= pos <= size */ +} ZSTD_inBuffer; + +typedef struct ZSTD_outBuffer_s { + void* dst; /**< start of output buffer */ + size_t size; /**< size of output buffer */ + size_t pos; /**< position where writing stopped. Will be updated. Necessarily 0 <= pos <= size */ +} ZSTD_outBuffer; + + + +/*-*********************************************************************** +* Streaming compression - HowTo +* +* A ZSTD_CStream object is required to track streaming operation. +* Use ZSTD_createCStream() and ZSTD_freeCStream() to create/release resources. +* ZSTD_CStream objects can be reused multiple times on consecutive compression operations. +* It is recommended to reuse ZSTD_CStream since it will play nicer with system's memory, by re-using already allocated memory. +* +* For parallel execution, use one separate ZSTD_CStream per thread. +* +* note : since v1.3.0, ZSTD_CStream and ZSTD_CCtx are the same thing. +* +* Parameters are sticky : when starting a new compression on the same context, +* it will reuse the same sticky parameters as previous compression session. +* When in doubt, it's recommended to fully initialize the context before usage. +* Use ZSTD_CCtx_reset() to reset the context and ZSTD_CCtx_setParameter(), +* ZSTD_CCtx_setPledgedSrcSize(), or ZSTD_CCtx_loadDictionary() and friends to +* set more specific parameters, the pledged source size, or load a dictionary. +* +* Use ZSTD_compressStream2() with ZSTD_e_continue as many times as necessary to +* consume input stream. The function will automatically update both `pos` +* fields within `input` and `output`. +* Note that the function may not consume the entire input, for example, because +* the output buffer is already full, in which case `input.pos < input.size`. +* The caller must check if input has been entirely consumed. +* If not, the caller must make some room to receive more compressed data, +* and then present again remaining input data. +* note: ZSTD_e_continue is guaranteed to make some forward progress when called, +* but doesn't guarantee maximal forward progress. This is especially relevant +* when compressing with multiple threads. The call won't block if it can +* consume some input, but if it can't it will wait for some, but not all, +* output to be flushed. +* @return : provides a minimum amount of data remaining to be flushed from internal buffers +* or an error code, which can be tested using ZSTD_isError(). +* +* At any moment, it's possible to flush whatever data might remain stuck within internal buffer, +* using ZSTD_compressStream2() with ZSTD_e_flush. `output->pos` will be updated. +* Note that, if `output->size` is too small, a single invocation with ZSTD_e_flush might not be enough (return code > 0). +* In which case, make some room to receive more compressed data, and call again ZSTD_compressStream2() with ZSTD_e_flush. +* You must continue calling ZSTD_compressStream2() with ZSTD_e_flush until it returns 0, at which point you can change the +* operation. +* note: ZSTD_e_flush will flush as much output as possible, meaning when compressing with multiple threads, it will +* block until the flush is complete or the output buffer is full. +* @return : 0 if internal buffers are entirely flushed, +* >0 if some data still present within internal buffer (the value is minimal estimation of remaining size), +* or an error code, which can be tested using ZSTD_isError(). +* +* Calling ZSTD_compressStream2() with ZSTD_e_end instructs to finish a frame. +* It will perform a flush and write frame epilogue. +* The epilogue is required for decoders to consider a frame completed. +* flush operation is the same, and follows same rules as calling ZSTD_compressStream2() with ZSTD_e_flush. +* You must continue calling ZSTD_compressStream2() with ZSTD_e_end until it returns 0, at which point you are free to +* start a new frame. +* note: ZSTD_e_end will flush as much output as possible, meaning when compressing with multiple threads, it will +* block until the flush is complete or the output buffer is full. +* @return : 0 if frame fully completed and fully flushed, +* >0 if some data still present within internal buffer (the value is minimal estimation of remaining size), +* or an error code, which can be tested using ZSTD_isError(). +* +* *******************************************************************/ + +typedef ZSTD_CCtx ZSTD_CStream; /**< CCtx and CStream are now effectively same object (>= v1.3.0) */ + /* Continue to distinguish them for compatibility with older versions <= v1.2.0 */ +/*===== ZSTD_CStream management functions =====*/ +ZSTDLIB_API ZSTD_CStream* ZSTD_createCStream(void); +ZSTDLIB_API size_t ZSTD_freeCStream(ZSTD_CStream* zcs); /* accept NULL pointer */ + +/*===== Streaming compression functions =====*/ +typedef enum { + ZSTD_e_continue=0, /* collect more data, encoder decides when to output compressed result, for optimal compression ratio */ + ZSTD_e_flush=1, /* flush any data provided so far, + * it creates (at least) one new block, that can be decoded immediately on reception; + * frame will continue: any future data can still reference previously compressed data, improving compression. + * note : multithreaded compression will block to flush as much output as possible. */ + ZSTD_e_end=2 /* flush any remaining data _and_ close current frame. + * note that frame is only closed after compressed data is fully flushed (return value == 0). + * After that point, any additional data starts a new frame. + * note : each frame is independent (does not reference any content from previous frame). + : note : multithreaded compression will block to flush as much output as possible. */ +} ZSTD_EndDirective; + +/*! ZSTD_compressStream2() : Requires v1.4.0+ + * Behaves about the same as ZSTD_compressStream, with additional control on end directive. + * - Compression parameters are pushed into CCtx before starting compression, using ZSTD_CCtx_set*() + * - Compression parameters cannot be changed once compression is started (save a list of exceptions in multi-threading mode) + * - output->pos must be <= dstCapacity, input->pos must be <= srcSize + * - output->pos and input->pos will be updated. They are guaranteed to remain below their respective limit. + * - endOp must be a valid directive + * - When nbWorkers==0 (default), function is blocking : it completes its job before returning to caller. + * - When nbWorkers>=1, function is non-blocking : it copies a portion of input, distributes jobs to internal worker threads, flush to output whatever is available, + * and then immediately returns, just indicating that there is some data remaining to be flushed. + * The function nonetheless guarantees forward progress : it will return only after it reads or write at least 1+ byte. + * - Exception : if the first call requests a ZSTD_e_end directive and provides enough dstCapacity, the function delegates to ZSTD_compress2() which is always blocking. + * - @return provides a minimum amount of data remaining to be flushed from internal buffers + * or an error code, which can be tested using ZSTD_isError(). + * if @return != 0, flush is not fully completed, there is still some data left within internal buffers. + * This is useful for ZSTD_e_flush, since in this case more flushes are necessary to empty all buffers. + * For ZSTD_e_end, @return == 0 when internal buffers are fully flushed and frame is completed. + * - after a ZSTD_e_end directive, if internal buffer is not fully flushed (@return != 0), + * only ZSTD_e_end or ZSTD_e_flush operations are allowed. + * Before starting a new compression job, or changing compression parameters, + * it is required to fully flush internal buffers. + * - note: if an operation ends with an error, it may leave @cctx in an undefined state. + * Therefore, it's UB to invoke ZSTD_compressStream2() of ZSTD_compressStream() on such a state. + * In order to be re-employed after an error, a state must be reset, + * which can be done explicitly (ZSTD_CCtx_reset()), + * or is sometimes implied by methods starting a new compression job (ZSTD_initCStream(), ZSTD_compressCCtx()) + */ +ZSTDLIB_API size_t ZSTD_compressStream2( ZSTD_CCtx* cctx, + ZSTD_outBuffer* output, + ZSTD_inBuffer* input, + ZSTD_EndDirective endOp); + + +/* These buffer sizes are softly recommended. + * They are not required : ZSTD_compressStream*() happily accepts any buffer size, for both input and output. + * Respecting the recommended size just makes it a bit easier for ZSTD_compressStream*(), + * reducing the amount of memory shuffling and buffering, resulting in minor performance savings. + * + * However, note that these recommendations are from the perspective of a C caller program. + * If the streaming interface is invoked from some other language, + * especially managed ones such as Java or Go, through a foreign function interface such as jni or cgo, + * a major performance rule is to reduce crossing such interface to an absolute minimum. + * It's not rare that performance ends being spent more into the interface, rather than compression itself. + * In which cases, prefer using large buffers, as large as practical, + * for both input and output, to reduce the nb of roundtrips. + */ +ZSTDLIB_API size_t ZSTD_CStreamInSize(void); /**< recommended size for input buffer */ +ZSTDLIB_API size_t ZSTD_CStreamOutSize(void); /**< recommended size for output buffer. Guarantee to successfully flush at least one complete compressed block. */ + + +/* ***************************************************************************** + * This following is a legacy streaming API, available since v1.0+ . + * It can be replaced by ZSTD_CCtx_reset() and ZSTD_compressStream2(). + * It is redundant, but remains fully supported. + ******************************************************************************/ + +/*! + * Equivalent to: + * + * ZSTD_CCtx_reset(zcs, ZSTD_reset_session_only); + * ZSTD_CCtx_refCDict(zcs, NULL); // clear the dictionary (if any) + * ZSTD_CCtx_setParameter(zcs, ZSTD_c_compressionLevel, compressionLevel); + * + * Note that ZSTD_initCStream() clears any previously set dictionary. Use the new API + * to compress with a dictionary. + */ +ZSTDLIB_API size_t ZSTD_initCStream(ZSTD_CStream* zcs, int compressionLevel); +/*! + * Alternative for ZSTD_compressStream2(zcs, output, input, ZSTD_e_continue). + * NOTE: The return value is different. ZSTD_compressStream() returns a hint for + * the next read size (if non-zero and not an error). ZSTD_compressStream2() + * returns the minimum nb of bytes left to flush (if non-zero and not an error). + */ +ZSTDLIB_API size_t ZSTD_compressStream(ZSTD_CStream* zcs, ZSTD_outBuffer* output, ZSTD_inBuffer* input); +/*! Equivalent to ZSTD_compressStream2(zcs, output, &emptyInput, ZSTD_e_flush). */ +ZSTDLIB_API size_t ZSTD_flushStream(ZSTD_CStream* zcs, ZSTD_outBuffer* output); +/*! Equivalent to ZSTD_compressStream2(zcs, output, &emptyInput, ZSTD_e_end). */ +ZSTDLIB_API size_t ZSTD_endStream(ZSTD_CStream* zcs, ZSTD_outBuffer* output); + + +/*-*************************************************************************** +* Streaming decompression - HowTo +* +* A ZSTD_DStream object is required to track streaming operations. +* Use ZSTD_createDStream() and ZSTD_freeDStream() to create/release resources. +* ZSTD_DStream objects can be re-employed multiple times. +* +* Use ZSTD_initDStream() to start a new decompression operation. +* @return : recommended first input size +* Alternatively, use advanced API to set specific properties. +* +* Use ZSTD_decompressStream() repetitively to consume your input. +* The function will update both `pos` fields. +* If `input.pos < input.size`, some input has not been consumed. +* It's up to the caller to present again remaining data. +* +* The function tries to flush all data decoded immediately, respecting output buffer size. +* If `output.pos < output.size`, decoder has flushed everything it could. +* +* However, when `output.pos == output.size`, it's more difficult to know. +* If @return > 0, the frame is not complete, meaning +* either there is still some data left to flush within internal buffers, +* or there is more input to read to complete the frame (or both). +* In which case, call ZSTD_decompressStream() again to flush whatever remains in the buffer. +* Note : with no additional input provided, amount of data flushed is necessarily <= ZSTD_BLOCKSIZE_MAX. +* @return : 0 when a frame is completely decoded and fully flushed, +* or an error code, which can be tested using ZSTD_isError(), +* or any other value > 0, which means there is still some decoding or flushing to do to complete current frame : +* the return value is a suggested next input size (just a hint for better latency) +* that will never request more than the remaining content of the compressed frame. +* *******************************************************************************/ + +typedef ZSTD_DCtx ZSTD_DStream; /**< DCtx and DStream are now effectively same object (>= v1.3.0) */ + /* For compatibility with versions <= v1.2.0, prefer differentiating them. */ +/*===== ZSTD_DStream management functions =====*/ +ZSTDLIB_API ZSTD_DStream* ZSTD_createDStream(void); +ZSTDLIB_API size_t ZSTD_freeDStream(ZSTD_DStream* zds); /* accept NULL pointer */ + +/*===== Streaming decompression functions =====*/ + +/*! ZSTD_initDStream() : + * Initialize/reset DStream state for new decompression operation. + * Call before new decompression operation using same DStream. + * + * Note : This function is redundant with the advanced API and equivalent to: + * ZSTD_DCtx_reset(zds, ZSTD_reset_session_only); + * ZSTD_DCtx_refDDict(zds, NULL); + */ +ZSTDLIB_API size_t ZSTD_initDStream(ZSTD_DStream* zds); + +/*! ZSTD_decompressStream() : + * Streaming decompression function. + * Call repetitively to consume full input updating it as necessary. + * Function will update both input and output `pos` fields exposing current state via these fields: + * - `input.pos < input.size`, some input remaining and caller should provide remaining input + * on the next call. + * - `output.pos < output.size`, decoder flushed internal output buffer. + * - `output.pos == output.size`, unflushed data potentially present in the internal buffers, + * check ZSTD_decompressStream() @return value, + * if > 0, invoke it again to flush remaining data to output. + * Note : with no additional input, amount of data flushed <= ZSTD_BLOCKSIZE_MAX. + * + * @return : 0 when a frame is completely decoded and fully flushed, + * or an error code, which can be tested using ZSTD_isError(), + * or any other value > 0, which means there is some decoding or flushing to do to complete current frame. + * + * Note: when an operation returns with an error code, the @zds state may be left in undefined state. + * It's UB to invoke `ZSTD_decompressStream()` on such a state. + * In order to re-use such a state, it must be first reset, + * which can be done explicitly (`ZSTD_DCtx_reset()`), + * or is implied for operations starting some new decompression job (`ZSTD_initDStream`, `ZSTD_decompressDCtx()`, `ZSTD_decompress_usingDict()`) + */ +ZSTDLIB_API size_t ZSTD_decompressStream(ZSTD_DStream* zds, ZSTD_outBuffer* output, ZSTD_inBuffer* input); + +ZSTDLIB_API size_t ZSTD_DStreamInSize(void); /*!< recommended size for input buffer */ +ZSTDLIB_API size_t ZSTD_DStreamOutSize(void); /*!< recommended size for output buffer. Guarantee to successfully flush at least one complete block in all circumstances. */ + + +/************************** +* Simple dictionary API +***************************/ +/*! ZSTD_compress_usingDict() : + * Compression at an explicit compression level using a Dictionary. + * A dictionary can be any arbitrary data segment (also called a prefix), + * or a buffer with specified information (see zdict.h). + * Note : This function loads the dictionary, resulting in significant startup delay. + * It's intended for a dictionary used only once. + * Note 2 : When `dict == NULL || dictSize < 8` no dictionary is used. */ +ZSTDLIB_API size_t ZSTD_compress_usingDict(ZSTD_CCtx* ctx, + void* dst, size_t dstCapacity, + const void* src, size_t srcSize, + const void* dict,size_t dictSize, + int compressionLevel); + +/*! ZSTD_decompress_usingDict() : + * Decompression using a known Dictionary. + * Dictionary must be identical to the one used during compression. + * Note : This function loads the dictionary, resulting in significant startup delay. + * It's intended for a dictionary used only once. + * Note : When `dict == NULL || dictSize < 8` no dictionary is used. */ +ZSTDLIB_API size_t ZSTD_decompress_usingDict(ZSTD_DCtx* dctx, + void* dst, size_t dstCapacity, + const void* src, size_t srcSize, + const void* dict,size_t dictSize); + + +/*********************************** + * Bulk processing dictionary API + **********************************/ +typedef struct ZSTD_CDict_s ZSTD_CDict; + +/*! ZSTD_createCDict() : + * When compressing multiple messages or blocks using the same dictionary, + * it's recommended to digest the dictionary only once, since it's a costly operation. + * ZSTD_createCDict() will create a state from digesting a dictionary. + * The resulting state can be used for future compression operations with very limited startup cost. + * ZSTD_CDict can be created once and shared by multiple threads concurrently, since its usage is read-only. + * @dictBuffer can be released after ZSTD_CDict creation, because its content is copied within CDict. + * Note 1 : Consider experimental function `ZSTD_createCDict_byReference()` if you prefer to not duplicate @dictBuffer content. + * Note 2 : A ZSTD_CDict can be created from an empty @dictBuffer, + * in which case the only thing that it transports is the @compressionLevel. + * This can be useful in a pipeline featuring ZSTD_compress_usingCDict() exclusively, + * expecting a ZSTD_CDict parameter with any data, including those without a known dictionary. */ +ZSTDLIB_API ZSTD_CDict* ZSTD_createCDict(const void* dictBuffer, size_t dictSize, + int compressionLevel); + +/*! ZSTD_freeCDict() : + * Function frees memory allocated by ZSTD_createCDict(). + * If a NULL pointer is passed, no operation is performed. */ +ZSTDLIB_API size_t ZSTD_freeCDict(ZSTD_CDict* CDict); + +/*! ZSTD_compress_usingCDict() : + * Compression using a digested Dictionary. + * Recommended when same dictionary is used multiple times. + * Note : compression level is _decided at dictionary creation time_, + * and frame parameters are hardcoded (dictID=yes, contentSize=yes, checksum=no) */ +ZSTDLIB_API size_t ZSTD_compress_usingCDict(ZSTD_CCtx* cctx, + void* dst, size_t dstCapacity, + const void* src, size_t srcSize, + const ZSTD_CDict* cdict); + + +typedef struct ZSTD_DDict_s ZSTD_DDict; + +/*! ZSTD_createDDict() : + * Create a digested dictionary, ready to start decompression operation without startup delay. + * dictBuffer can be released after DDict creation, as its content is copied inside DDict. */ +ZSTDLIB_API ZSTD_DDict* ZSTD_createDDict(const void* dictBuffer, size_t dictSize); + +/*! ZSTD_freeDDict() : + * Function frees memory allocated with ZSTD_createDDict() + * If a NULL pointer is passed, no operation is performed. */ +ZSTDLIB_API size_t ZSTD_freeDDict(ZSTD_DDict* ddict); + +/*! ZSTD_decompress_usingDDict() : + * Decompression using a digested Dictionary. + * Recommended when same dictionary is used multiple times. */ +ZSTDLIB_API size_t ZSTD_decompress_usingDDict(ZSTD_DCtx* dctx, + void* dst, size_t dstCapacity, + const void* src, size_t srcSize, + const ZSTD_DDict* ddict); + + +/******************************** + * Dictionary helper functions + *******************************/ + +/*! ZSTD_getDictID_fromDict() : Requires v1.4.0+ + * Provides the dictID stored within dictionary. + * if @return == 0, the dictionary is not conformant with Zstandard specification. + * It can still be loaded, but as a content-only dictionary. */ +ZSTDLIB_API unsigned ZSTD_getDictID_fromDict(const void* dict, size_t dictSize); + +/*! ZSTD_getDictID_fromCDict() : Requires v1.5.0+ + * Provides the dictID of the dictionary loaded into `cdict`. + * If @return == 0, the dictionary is not conformant to Zstandard specification, or empty. + * Non-conformant dictionaries can still be loaded, but as content-only dictionaries. */ +ZSTDLIB_API unsigned ZSTD_getDictID_fromCDict(const ZSTD_CDict* cdict); + +/*! ZSTD_getDictID_fromDDict() : Requires v1.4.0+ + * Provides the dictID of the dictionary loaded into `ddict`. + * If @return == 0, the dictionary is not conformant to Zstandard specification, or empty. + * Non-conformant dictionaries can still be loaded, but as content-only dictionaries. */ +ZSTDLIB_API unsigned ZSTD_getDictID_fromDDict(const ZSTD_DDict* ddict); + +/*! ZSTD_getDictID_fromFrame() : Requires v1.4.0+ + * Provides the dictID required to decompressed the frame stored within `src`. + * If @return == 0, the dictID could not be decoded. + * This could for one of the following reasons : + * - The frame does not require a dictionary to be decoded (most common case). + * - The frame was built with dictID intentionally removed. Whatever dictionary is necessary is a hidden piece of information. + * Note : this use case also happens when using a non-conformant dictionary. + * - `srcSize` is too small, and as a result, the frame header could not be decoded (only possible if `srcSize < ZSTD_FRAMEHEADERSIZE_MAX`). + * - This is not a Zstandard frame. + * When identifying the exact failure cause, it's possible to use ZSTD_getFrameHeader(), which will provide a more precise error code. */ +ZSTDLIB_API unsigned ZSTD_getDictID_fromFrame(const void* src, size_t srcSize); + + +/******************************************************************************* + * Advanced dictionary and prefix API (Requires v1.4.0+) + * + * This API allows dictionaries to be used with ZSTD_compress2(), + * ZSTD_compressStream2(), and ZSTD_decompressDCtx(). + * Dictionaries are sticky, they remain valid when same context is reused, + * they only reset when the context is reset + * with ZSTD_reset_parameters or ZSTD_reset_session_and_parameters. + * In contrast, Prefixes are single-use. + ******************************************************************************/ + + +/*! ZSTD_CCtx_loadDictionary() : Requires v1.4.0+ + * Create an internal CDict from `dict` buffer. + * Decompression will have to use same dictionary. + * @result : 0, or an error code (which can be tested with ZSTD_isError()). + * Special: Loading a NULL (or 0-size) dictionary invalidates previous dictionary, + * meaning "return to no-dictionary mode". + * Note 1 : Dictionary is sticky, it will be used for all future compressed frames, + * until parameters are reset, a new dictionary is loaded, or the dictionary + * is explicitly invalidated by loading a NULL dictionary. + * Note 2 : Loading a dictionary involves building tables. + * It's also a CPU consuming operation, with non-negligible impact on latency. + * Tables are dependent on compression parameters, and for this reason, + * compression parameters can no longer be changed after loading a dictionary. + * Note 3 :`dict` content will be copied internally. + * Use experimental ZSTD_CCtx_loadDictionary_byReference() to reference content instead. + * In such a case, dictionary buffer must outlive its users. + * Note 4 : Use ZSTD_CCtx_loadDictionary_advanced() + * to precisely select how dictionary content must be interpreted. + * Note 5 : This method does not benefit from LDM (long distance mode). + * If you want to employ LDM on some large dictionary content, + * prefer employing ZSTD_CCtx_refPrefix() described below. + */ +ZSTDLIB_API size_t ZSTD_CCtx_loadDictionary(ZSTD_CCtx* cctx, const void* dict, size_t dictSize); + +/*! ZSTD_CCtx_refCDict() : Requires v1.4.0+ + * Reference a prepared dictionary, to be used for all future compressed frames. + * Note that compression parameters are enforced from within CDict, + * and supersede any compression parameter previously set within CCtx. + * The parameters ignored are labelled as "superseded-by-cdict" in the ZSTD_cParameter enum docs. + * The ignored parameters will be used again if the CCtx is returned to no-dictionary mode. + * The dictionary will remain valid for future compressed frames using same CCtx. + * @result : 0, or an error code (which can be tested with ZSTD_isError()). + * Special : Referencing a NULL CDict means "return to no-dictionary mode". + * Note 1 : Currently, only one dictionary can be managed. + * Referencing a new dictionary effectively "discards" any previous one. + * Note 2 : CDict is just referenced, its lifetime must outlive its usage within CCtx. */ +ZSTDLIB_API size_t ZSTD_CCtx_refCDict(ZSTD_CCtx* cctx, const ZSTD_CDict* cdict); + +/*! ZSTD_CCtx_refPrefix() : Requires v1.4.0+ + * Reference a prefix (single-usage dictionary) for next compressed frame. + * A prefix is **only used once**. Tables are discarded at end of frame (ZSTD_e_end). + * Decompression will need same prefix to properly regenerate data. + * Compressing with a prefix is similar in outcome as performing a diff and compressing it, + * but performs much faster, especially during decompression (compression speed is tunable with compression level). + * This method is compatible with LDM (long distance mode). + * @result : 0, or an error code (which can be tested with ZSTD_isError()). + * Special: Adding any prefix (including NULL) invalidates any previous prefix or dictionary + * Note 1 : Prefix buffer is referenced. It **must** outlive compression. + * Its content must remain unmodified during compression. + * Note 2 : If the intention is to diff some large src data blob with some prior version of itself, + * ensure that the window size is large enough to contain the entire source. + * See ZSTD_c_windowLog. + * Note 3 : Referencing a prefix involves building tables, which are dependent on compression parameters. + * It's a CPU consuming operation, with non-negligible impact on latency. + * If there is a need to use the same prefix multiple times, consider loadDictionary instead. + * Note 4 : By default, the prefix is interpreted as raw content (ZSTD_dct_rawContent). + * Use experimental ZSTD_CCtx_refPrefix_advanced() to alter dictionary interpretation. */ +ZSTDLIB_API size_t ZSTD_CCtx_refPrefix(ZSTD_CCtx* cctx, + const void* prefix, size_t prefixSize); + +/*! ZSTD_DCtx_loadDictionary() : Requires v1.4.0+ + * Create an internal DDict from dict buffer, to be used to decompress all future frames. + * The dictionary remains valid for all future frames, until explicitly invalidated, or + * a new dictionary is loaded. + * @result : 0, or an error code (which can be tested with ZSTD_isError()). + * Special : Adding a NULL (or 0-size) dictionary invalidates any previous dictionary, + * meaning "return to no-dictionary mode". + * Note 1 : Loading a dictionary involves building tables, + * which has a non-negligible impact on CPU usage and latency. + * It's recommended to "load once, use many times", to amortize the cost + * Note 2 :`dict` content will be copied internally, so `dict` can be released after loading. + * Use ZSTD_DCtx_loadDictionary_byReference() to reference dictionary content instead. + * Note 3 : Use ZSTD_DCtx_loadDictionary_advanced() to take control of + * how dictionary content is loaded and interpreted. + */ +ZSTDLIB_API size_t ZSTD_DCtx_loadDictionary(ZSTD_DCtx* dctx, const void* dict, size_t dictSize); + +/*! ZSTD_DCtx_refDDict() : Requires v1.4.0+ + * Reference a prepared dictionary, to be used to decompress next frames. + * The dictionary remains active for decompression of future frames using same DCtx. + * + * If called with ZSTD_d_refMultipleDDicts enabled, repeated calls of this function + * will store the DDict references in a table, and the DDict used for decompression + * will be determined at decompression time, as per the dict ID in the frame. + * The memory for the table is allocated on the first call to refDDict, and can be + * freed with ZSTD_freeDCtx(). + * + * If called with ZSTD_d_refMultipleDDicts disabled (the default), only one dictionary + * will be managed, and referencing a dictionary effectively "discards" any previous one. + * + * @result : 0, or an error code (which can be tested with ZSTD_isError()). + * Special: referencing a NULL DDict means "return to no-dictionary mode". + * Note 2 : DDict is just referenced, its lifetime must outlive its usage from DCtx. + */ +ZSTDLIB_API size_t ZSTD_DCtx_refDDict(ZSTD_DCtx* dctx, const ZSTD_DDict* ddict); + +/*! ZSTD_DCtx_refPrefix() : Requires v1.4.0+ + * Reference a prefix (single-usage dictionary) to decompress next frame. + * This is the reverse operation of ZSTD_CCtx_refPrefix(), + * and must use the same prefix as the one used during compression. + * Prefix is **only used once**. Reference is discarded at end of frame. + * End of frame is reached when ZSTD_decompressStream() returns 0. + * @result : 0, or an error code (which can be tested with ZSTD_isError()). + * Note 1 : Adding any prefix (including NULL) invalidates any previously set prefix or dictionary + * Note 2 : Prefix buffer is referenced. It **must** outlive decompression. + * Prefix buffer must remain unmodified up to the end of frame, + * reached when ZSTD_decompressStream() returns 0. + * Note 3 : By default, the prefix is treated as raw content (ZSTD_dct_rawContent). + * Use ZSTD_CCtx_refPrefix_advanced() to alter dictMode (Experimental section) + * Note 4 : Referencing a raw content prefix has almost no cpu nor memory cost. + * A full dictionary is more costly, as it requires building tables. + */ +ZSTDLIB_API size_t ZSTD_DCtx_refPrefix(ZSTD_DCtx* dctx, + const void* prefix, size_t prefixSize); + +/* === Memory management === */ + +/*! ZSTD_sizeof_*() : Requires v1.4.0+ + * These functions give the _current_ memory usage of selected object. + * Note that object memory usage can evolve (increase or decrease) over time. */ +ZSTDLIB_API size_t ZSTD_sizeof_CCtx(const ZSTD_CCtx* cctx); +ZSTDLIB_API size_t ZSTD_sizeof_DCtx(const ZSTD_DCtx* dctx); +ZSTDLIB_API size_t ZSTD_sizeof_CStream(const ZSTD_CStream* zcs); +ZSTDLIB_API size_t ZSTD_sizeof_DStream(const ZSTD_DStream* zds); +ZSTDLIB_API size_t ZSTD_sizeof_CDict(const ZSTD_CDict* cdict); +ZSTDLIB_API size_t ZSTD_sizeof_DDict(const ZSTD_DDict* ddict); + +#if defined (__cplusplus) +} +#endif + +#endif /* ZSTD_H_235446 */ + + +/* ************************************************************************************** + * ADVANCED AND EXPERIMENTAL FUNCTIONS + **************************************************************************************** + * The definitions in the following section are considered experimental. + * They are provided for advanced scenarios. + * They should never be used with a dynamic library, as prototypes may change in the future. + * Use them only in association with static linking. + * ***************************************************************************************/ + +#if defined(ZSTD_STATIC_LINKING_ONLY) && !defined(ZSTD_H_ZSTD_STATIC_LINKING_ONLY) +#define ZSTD_H_ZSTD_STATIC_LINKING_ONLY + +#if defined (__cplusplus) +extern "C" { +#endif + +/* This can be overridden externally to hide static symbols. */ +#ifndef ZSTDLIB_STATIC_API +# if defined(ZSTD_DLL_EXPORT) && (ZSTD_DLL_EXPORT==1) +# define ZSTDLIB_STATIC_API __declspec(dllexport) ZSTDLIB_VISIBLE +# elif defined(ZSTD_DLL_IMPORT) && (ZSTD_DLL_IMPORT==1) +# define ZSTDLIB_STATIC_API __declspec(dllimport) ZSTDLIB_VISIBLE +# else +# define ZSTDLIB_STATIC_API ZSTDLIB_VISIBLE +# endif +#endif + +/**************************************************************************************** + * experimental API (static linking only) + **************************************************************************************** + * The following symbols and constants + * are not planned to join "stable API" status in the near future. + * They can still change in future versions. + * Some of them are planned to remain in the static_only section indefinitely. + * Some of them might be removed in the future (especially when redundant with existing stable functions) + * ***************************************************************************************/ + +#define ZSTD_FRAMEHEADERSIZE_PREFIX(format) ((format) == ZSTD_f_zstd1 ? 5 : 1) /* minimum input size required to query frame header size */ +#define ZSTD_FRAMEHEADERSIZE_MIN(format) ((format) == ZSTD_f_zstd1 ? 6 : 2) +#define ZSTD_FRAMEHEADERSIZE_MAX 18 /* can be useful for static allocation */ +#define ZSTD_SKIPPABLEHEADERSIZE 8 + +/* compression parameter bounds */ +#define ZSTD_WINDOWLOG_MAX_32 30 +#define ZSTD_WINDOWLOG_MAX_64 31 +#define ZSTD_WINDOWLOG_MAX ((int)(sizeof(size_t) == 4 ? ZSTD_WINDOWLOG_MAX_32 : ZSTD_WINDOWLOG_MAX_64)) +#define ZSTD_WINDOWLOG_MIN 10 +#define ZSTD_HASHLOG_MAX ((ZSTD_WINDOWLOG_MAX < 30) ? ZSTD_WINDOWLOG_MAX : 30) +#define ZSTD_HASHLOG_MIN 6 +#define ZSTD_CHAINLOG_MAX_32 29 +#define ZSTD_CHAINLOG_MAX_64 30 +#define ZSTD_CHAINLOG_MAX ((int)(sizeof(size_t) == 4 ? ZSTD_CHAINLOG_MAX_32 : ZSTD_CHAINLOG_MAX_64)) +#define ZSTD_CHAINLOG_MIN ZSTD_HASHLOG_MIN +#define ZSTD_SEARCHLOG_MAX (ZSTD_WINDOWLOG_MAX-1) +#define ZSTD_SEARCHLOG_MIN 1 +#define ZSTD_MINMATCH_MAX 7 /* only for ZSTD_fast, other strategies are limited to 6 */ +#define ZSTD_MINMATCH_MIN 3 /* only for ZSTD_btopt+, faster strategies are limited to 4 */ +#define ZSTD_TARGETLENGTH_MAX ZSTD_BLOCKSIZE_MAX +#define ZSTD_TARGETLENGTH_MIN 0 /* note : comparing this constant to an unsigned results in a tautological test */ +#define ZSTD_STRATEGY_MIN ZSTD_fast +#define ZSTD_STRATEGY_MAX ZSTD_btultra2 +#define ZSTD_BLOCKSIZE_MAX_MIN (1 << 10) /* The minimum valid max blocksize. Maximum blocksizes smaller than this make compressBound() inaccurate. */ + + +#define ZSTD_OVERLAPLOG_MIN 0 +#define ZSTD_OVERLAPLOG_MAX 9 + +#define ZSTD_WINDOWLOG_LIMIT_DEFAULT 27 /* by default, the streaming decoder will refuse any frame + * requiring larger than (1< 0: + * If litLength != 0: + * rep == 1 --> offset == repeat_offset_1 + * rep == 2 --> offset == repeat_offset_2 + * rep == 3 --> offset == repeat_offset_3 + * If litLength == 0: + * rep == 1 --> offset == repeat_offset_2 + * rep == 2 --> offset == repeat_offset_3 + * rep == 3 --> offset == repeat_offset_1 - 1 + * + * Note: This field is optional. ZSTD_generateSequences() will calculate the value of + * 'rep', but repeat offsets do not necessarily need to be calculated from an external + * sequence provider perspective. For example, ZSTD_compressSequences() does not + * use this 'rep' field at all (as of now). + */ +} ZSTD_Sequence; + +typedef struct { + unsigned windowLog; /**< largest match distance : larger == more compression, more memory needed during decompression */ + unsigned chainLog; /**< fully searched segment : larger == more compression, slower, more memory (useless for fast) */ + unsigned hashLog; /**< dispatch table : larger == faster, more memory */ + unsigned searchLog; /**< nb of searches : larger == more compression, slower */ + unsigned minMatch; /**< match length searched : larger == faster decompression, sometimes less compression */ + unsigned targetLength; /**< acceptable match size for optimal parser (only) : larger == more compression, slower */ + ZSTD_strategy strategy; /**< see ZSTD_strategy definition above */ +} ZSTD_compressionParameters; + +typedef struct { + int contentSizeFlag; /**< 1: content size will be in frame header (when known) */ + int checksumFlag; /**< 1: generate a 32-bits checksum using XXH64 algorithm at end of frame, for error detection */ + int noDictIDFlag; /**< 1: no dictID will be saved into frame header (dictID is only useful for dictionary compression) */ +} ZSTD_frameParameters; + +typedef struct { + ZSTD_compressionParameters cParams; + ZSTD_frameParameters fParams; +} ZSTD_parameters; + +typedef enum { + ZSTD_dct_auto = 0, /* dictionary is "full" when starting with ZSTD_MAGIC_DICTIONARY, otherwise it is "rawContent" */ + ZSTD_dct_rawContent = 1, /* ensures dictionary is always loaded as rawContent, even if it starts with ZSTD_MAGIC_DICTIONARY */ + ZSTD_dct_fullDict = 2 /* refuses to load a dictionary if it does not respect Zstandard's specification, starting with ZSTD_MAGIC_DICTIONARY */ +} ZSTD_dictContentType_e; + +typedef enum { + ZSTD_dlm_byCopy = 0, /**< Copy dictionary content internally */ + ZSTD_dlm_byRef = 1 /**< Reference dictionary content -- the dictionary buffer must outlive its users. */ +} ZSTD_dictLoadMethod_e; + +typedef enum { + ZSTD_f_zstd1 = 0, /* zstd frame format, specified in zstd_compression_format.md (default) */ + ZSTD_f_zstd1_magicless = 1 /* Variant of zstd frame format, without initial 4-bytes magic number. + * Useful to save 4 bytes per generated frame. + * Decoder cannot recognise automatically this format, requiring this instruction. */ +} ZSTD_format_e; + +typedef enum { + /* Note: this enum controls ZSTD_d_forceIgnoreChecksum */ + ZSTD_d_validateChecksum = 0, + ZSTD_d_ignoreChecksum = 1 +} ZSTD_forceIgnoreChecksum_e; + +typedef enum { + /* Note: this enum controls ZSTD_d_refMultipleDDicts */ + ZSTD_rmd_refSingleDDict = 0, + ZSTD_rmd_refMultipleDDicts = 1 +} ZSTD_refMultipleDDicts_e; + +typedef enum { + /* Note: this enum and the behavior it controls are effectively internal + * implementation details of the compressor. They are expected to continue + * to evolve and should be considered only in the context of extremely + * advanced performance tuning. + * + * Zstd currently supports the use of a CDict in three ways: + * + * - The contents of the CDict can be copied into the working context. This + * means that the compression can search both the dictionary and input + * while operating on a single set of internal tables. This makes + * the compression faster per-byte of input. However, the initial copy of + * the CDict's tables incurs a fixed cost at the beginning of the + * compression. For small compressions (< 8 KB), that copy can dominate + * the cost of the compression. + * + * - The CDict's tables can be used in-place. In this model, compression is + * slower per input byte, because the compressor has to search two sets of + * tables. However, this model incurs no start-up cost (as long as the + * working context's tables can be reused). For small inputs, this can be + * faster than copying the CDict's tables. + * + * - The CDict's tables are not used at all, and instead we use the working + * context alone to reload the dictionary and use params based on the source + * size. See ZSTD_compress_insertDictionary() and ZSTD_compress_usingDict(). + * This method is effective when the dictionary sizes are very small relative + * to the input size, and the input size is fairly large to begin with. + * + * Zstd has a simple internal heuristic that selects which strategy to use + * at the beginning of a compression. However, if experimentation shows that + * Zstd is making poor choices, it is possible to override that choice with + * this enum. + */ + ZSTD_dictDefaultAttach = 0, /* Use the default heuristic. */ + ZSTD_dictForceAttach = 1, /* Never copy the dictionary. */ + ZSTD_dictForceCopy = 2, /* Always copy the dictionary. */ + ZSTD_dictForceLoad = 3 /* Always reload the dictionary */ +} ZSTD_dictAttachPref_e; + +typedef enum { + ZSTD_lcm_auto = 0, /**< Automatically determine the compression mode based on the compression level. + * Negative compression levels will be uncompressed, and positive compression + * levels will be compressed. */ + ZSTD_lcm_huffman = 1, /**< Always attempt Huffman compression. Uncompressed literals will still be + * emitted if Huffman compression is not profitable. */ + ZSTD_lcm_uncompressed = 2 /**< Always emit uncompressed literals. */ +} ZSTD_literalCompressionMode_e; + +typedef enum { + /* Note: This enum controls features which are conditionally beneficial. + * Zstd can take a decision on whether or not to enable the feature (ZSTD_ps_auto), + * but setting the switch to ZSTD_ps_enable or ZSTD_ps_disable force enable/disable the feature. + */ + ZSTD_ps_auto = 0, /* Let the library automatically determine whether the feature shall be enabled */ + ZSTD_ps_enable = 1, /* Force-enable the feature */ + ZSTD_ps_disable = 2 /* Do not use the feature */ +} ZSTD_ParamSwitch_e; +#define ZSTD_paramSwitch_e ZSTD_ParamSwitch_e /* old name */ + +/*************************************** +* Frame header and size functions +***************************************/ + +/*! ZSTD_findDecompressedSize() : + * `src` should point to the start of a series of ZSTD encoded and/or skippable frames + * `srcSize` must be the _exact_ size of this series + * (i.e. there should be a frame boundary at `src + srcSize`) + * @return : - decompressed size of all data in all successive frames + * - if the decompressed size cannot be determined: ZSTD_CONTENTSIZE_UNKNOWN + * - if an error occurred: ZSTD_CONTENTSIZE_ERROR + * + * note 1 : decompressed size is an optional field, that may not be present, especially in streaming mode. + * When `return==ZSTD_CONTENTSIZE_UNKNOWN`, data to decompress could be any size. + * In which case, it's necessary to use streaming mode to decompress data. + * note 2 : decompressed size is always present when compression is done with ZSTD_compress() + * note 3 : decompressed size can be very large (64-bits value), + * potentially larger than what local system can handle as a single memory segment. + * In which case, it's necessary to use streaming mode to decompress data. + * note 4 : If source is untrusted, decompressed size could be wrong or intentionally modified. + * Always ensure result fits within application's authorized limits. + * Each application can set its own limits. + * note 5 : ZSTD_findDecompressedSize handles multiple frames, and so it must traverse the input to + * read each contained frame header. This is fast as most of the data is skipped, + * however it does mean that all frame data must be present and valid. */ +ZSTDLIB_STATIC_API unsigned long long ZSTD_findDecompressedSize(const void* src, size_t srcSize); + +/*! ZSTD_decompressBound() : + * `src` should point to the start of a series of ZSTD encoded and/or skippable frames + * `srcSize` must be the _exact_ size of this series + * (i.e. there should be a frame boundary at `src + srcSize`) + * @return : - upper-bound for the decompressed size of all data in all successive frames + * - if an error occurred: ZSTD_CONTENTSIZE_ERROR + * + * note 1 : an error can occur if `src` contains an invalid or incorrectly formatted frame. + * note 2 : the upper-bound is exact when the decompressed size field is available in every ZSTD encoded frame of `src`. + * in this case, `ZSTD_findDecompressedSize` and `ZSTD_decompressBound` return the same value. + * note 3 : when the decompressed size field isn't available, the upper-bound for that frame is calculated by: + * upper-bound = # blocks * min(128 KB, Window_Size) + */ +ZSTDLIB_STATIC_API unsigned long long ZSTD_decompressBound(const void* src, size_t srcSize); + +/*! ZSTD_frameHeaderSize() : + * srcSize must be large enough, aka >= ZSTD_FRAMEHEADERSIZE_PREFIX. + * @return : size of the Frame Header, + * or an error code (if srcSize is too small) */ +ZSTDLIB_STATIC_API size_t ZSTD_frameHeaderSize(const void* src, size_t srcSize); + +typedef enum { ZSTD_frame, ZSTD_skippableFrame } ZSTD_FrameType_e; +#define ZSTD_frameType_e ZSTD_FrameType_e /* old name */ +typedef struct { + unsigned long long frameContentSize; /* if == ZSTD_CONTENTSIZE_UNKNOWN, it means this field is not available. 0 means "empty" */ + unsigned long long windowSize; /* can be very large, up to <= frameContentSize */ + unsigned blockSizeMax; + ZSTD_FrameType_e frameType; /* if == ZSTD_skippableFrame, frameContentSize is the size of skippable content */ + unsigned headerSize; + unsigned dictID; /* for ZSTD_skippableFrame, contains the skippable magic variant [0-15] */ + unsigned checksumFlag; + unsigned _reserved1; + unsigned _reserved2; +} ZSTD_FrameHeader; +#define ZSTD_frameHeader ZSTD_FrameHeader /* old name */ + +/*! ZSTD_getFrameHeader() : + * decode Frame Header into `zfhPtr`, or requires larger `srcSize`. + * @return : 0 => header is complete, `zfhPtr` is correctly filled, + * >0 => `srcSize` is too small, @return value is the wanted `srcSize` amount, `zfhPtr` is not filled, + * or an error code, which can be tested using ZSTD_isError() */ +ZSTDLIB_STATIC_API size_t ZSTD_getFrameHeader(ZSTD_FrameHeader* zfhPtr, const void* src, size_t srcSize); +/*! ZSTD_getFrameHeader_advanced() : + * same as ZSTD_getFrameHeader(), + * with added capability to select a format (like ZSTD_f_zstd1_magicless) */ +ZSTDLIB_STATIC_API size_t ZSTD_getFrameHeader_advanced(ZSTD_FrameHeader* zfhPtr, const void* src, size_t srcSize, ZSTD_format_e format); + +/*! ZSTD_decompressionMargin() : + * Zstd supports in-place decompression, where the input and output buffers overlap. + * In this case, the output buffer must be at least (Margin + Output_Size) bytes large, + * and the input buffer must be at the end of the output buffer. + * + * _______________________ Output Buffer ________________________ + * | | + * | ____ Input Buffer ____| + * | | | + * v v v + * |---------------------------------------|-----------|----------| + * ^ ^ ^ + * |___________________ Output_Size ___________________|_ Margin _| + * + * NOTE: See also ZSTD_DECOMPRESSION_MARGIN(). + * NOTE: This applies only to single-pass decompression through ZSTD_decompress() or + * ZSTD_decompressDCtx(). + * NOTE: This function supports multi-frame input. + * + * @param src The compressed frame(s) + * @param srcSize The size of the compressed frame(s) + * @returns The decompression margin or an error that can be checked with ZSTD_isError(). + */ +ZSTDLIB_STATIC_API size_t ZSTD_decompressionMargin(const void* src, size_t srcSize); + +/*! ZSTD_DECOMPRESS_MARGIN() : + * Similar to ZSTD_decompressionMargin(), but instead of computing the margin from + * the compressed frame, compute it from the original size and the blockSizeLog. + * See ZSTD_decompressionMargin() for details. + * + * WARNING: This macro does not support multi-frame input, the input must be a single + * zstd frame. If you need that support use the function, or implement it yourself. + * + * @param originalSize The original uncompressed size of the data. + * @param blockSize The block size == MIN(windowSize, ZSTD_BLOCKSIZE_MAX). + * Unless you explicitly set the windowLog smaller than + * ZSTD_BLOCKSIZELOG_MAX you can just use ZSTD_BLOCKSIZE_MAX. + */ +#define ZSTD_DECOMPRESSION_MARGIN(originalSize, blockSize) ((size_t)( \ + ZSTD_FRAMEHEADERSIZE_MAX /* Frame header */ + \ + 4 /* checksum */ + \ + ((originalSize) == 0 ? 0 : 3 * (((originalSize) + (blockSize) - 1) / blockSize)) /* 3 bytes per block */ + \ + (blockSize) /* One block of margin */ \ + )) + +typedef enum { + ZSTD_sf_noBlockDelimiters = 0, /* ZSTD_Sequence[] has no block delimiters, just sequences */ + ZSTD_sf_explicitBlockDelimiters = 1 /* ZSTD_Sequence[] contains explicit block delimiters */ +} ZSTD_SequenceFormat_e; +#define ZSTD_sequenceFormat_e ZSTD_SequenceFormat_e /* old name */ + +/*! ZSTD_sequenceBound() : + * `srcSize` : size of the input buffer + * @return : upper-bound for the number of sequences that can be generated + * from a buffer of srcSize bytes + * + * note : returns number of sequences - to get bytes, multiply by sizeof(ZSTD_Sequence). + */ +ZSTDLIB_STATIC_API size_t ZSTD_sequenceBound(size_t srcSize); + +/*! ZSTD_generateSequences() : + * WARNING: This function is meant for debugging and informational purposes ONLY! + * Its implementation is flawed, and it will be deleted in a future version. + * It is not guaranteed to succeed, as there are several cases where it will give + * up and fail. You should NOT use this function in production code. + * + * This function is deprecated, and will be removed in a future version. + * + * Generate sequences using ZSTD_compress2(), given a source buffer. + * + * @param zc The compression context to be used for ZSTD_compress2(). Set any + * compression parameters you need on this context. + * @param outSeqs The output sequences buffer of size @p outSeqsSize + * @param outSeqsCapacity The size of the output sequences buffer. + * ZSTD_sequenceBound(srcSize) is an upper bound on the number + * of sequences that can be generated. + * @param src The source buffer to generate sequences from of size @p srcSize. + * @param srcSize The size of the source buffer. + * + * Each block will end with a dummy sequence + * with offset == 0, matchLength == 0, and litLength == length of last literals. + * litLength may be == 0, and if so, then the sequence of (of: 0 ml: 0 ll: 0) + * simply acts as a block delimiter. + * + * @returns The number of sequences generated, necessarily less than + * ZSTD_sequenceBound(srcSize), or an error code that can be checked + * with ZSTD_isError(). + */ +ZSTD_DEPRECATED("For debugging only, will be replaced by ZSTD_extractSequences()") +ZSTDLIB_STATIC_API size_t +ZSTD_generateSequences(ZSTD_CCtx* zc, + ZSTD_Sequence* outSeqs, size_t outSeqsCapacity, + const void* src, size_t srcSize); + +/*! ZSTD_mergeBlockDelimiters() : + * Given an array of ZSTD_Sequence, remove all sequences that represent block delimiters/last literals + * by merging them into the literals of the next sequence. + * + * As such, the final generated result has no explicit representation of block boundaries, + * and the final last literals segment is not represented in the sequences. + * + * The output of this function can be fed into ZSTD_compressSequences() with CCtx + * setting of ZSTD_c_blockDelimiters as ZSTD_sf_noBlockDelimiters + * @return : number of sequences left after merging + */ +ZSTDLIB_STATIC_API size_t ZSTD_mergeBlockDelimiters(ZSTD_Sequence* sequences, size_t seqsSize); + +/*! ZSTD_compressSequences() : + * Compress an array of ZSTD_Sequence, associated with @src buffer, into dst. + * @src contains the entire input (not just the literals). + * If @srcSize > sum(sequence.length), the remaining bytes are considered all literals + * If a dictionary is included, then the cctx should reference the dict (see: ZSTD_CCtx_refCDict(), ZSTD_CCtx_loadDictionary(), etc.). + * The entire source is compressed into a single frame. + * + * The compression behavior changes based on cctx params. In particular: + * If ZSTD_c_blockDelimiters == ZSTD_sf_noBlockDelimiters, the array of ZSTD_Sequence is expected to contain + * no block delimiters (defined in ZSTD_Sequence). Block boundaries are roughly determined based on + * the block size derived from the cctx, and sequences may be split. This is the default setting. + * + * If ZSTD_c_blockDelimiters == ZSTD_sf_explicitBlockDelimiters, the array of ZSTD_Sequence is expected to contain + * valid block delimiters (defined in ZSTD_Sequence). Behavior is undefined if no block delimiters are provided. + * + * When ZSTD_c_blockDelimiters == ZSTD_sf_explicitBlockDelimiters, it's possible to decide generating repcodes + * using the advanced parameter ZSTD_c_repcodeResolution. Repcodes will improve compression ratio, though the benefit + * can vary greatly depending on Sequences. On the other hand, repcode resolution is an expensive operation. + * By default, it's disabled at low (<10) compression levels, and enabled above the threshold (>=10). + * ZSTD_c_repcodeResolution makes it possible to directly manage this processing in either direction. + * + * If ZSTD_c_validateSequences == 0, this function blindly accepts the Sequences provided. Invalid Sequences cause undefined + * behavior. If ZSTD_c_validateSequences == 1, then the function will detect invalid Sequences (see doc/zstd_compression_format.md for + * specifics regarding offset/matchlength requirements) and then bail out and return an error. + * + * In addition to the two adjustable experimental params, there are other important cctx params. + * - ZSTD_c_minMatch MUST be set as less than or equal to the smallest match generated by the match finder. It has a minimum value of ZSTD_MINMATCH_MIN. + * - ZSTD_c_compressionLevel accordingly adjusts the strength of the entropy coder, as it would in typical compression. + * - ZSTD_c_windowLog affects offset validation: this function will return an error at higher debug levels if a provided offset + * is larger than what the spec allows for a given window log and dictionary (if present). See: doc/zstd_compression_format.md + * + * Note: Repcodes are, as of now, always re-calculated within this function, ZSTD_Sequence.rep is effectively unused. + * Dev Note: Once ability to ingest repcodes become available, the explicit block delims mode must respect those repcodes exactly, + * and cannot emit an RLE block that disagrees with the repcode history. + * @return : final compressed size, or a ZSTD error code. + */ +ZSTDLIB_STATIC_API size_t +ZSTD_compressSequences(ZSTD_CCtx* cctx, + void* dst, size_t dstCapacity, + const ZSTD_Sequence* inSeqs, size_t inSeqsSize, + const void* src, size_t srcSize); + + +/*! ZSTD_compressSequencesAndLiterals() : + * This is a variant of ZSTD_compressSequences() which, + * instead of receiving (src,srcSize) as input parameter, receives (literals,litSize), + * aka all the literals, already extracted and laid out into a single continuous buffer. + * This can be useful if the process generating the sequences also happens to generate the buffer of literals, + * thus skipping an extraction + caching stage. + * It's a speed optimization, useful when the right conditions are met, + * but it also features the following limitations: + * - Only supports explicit delimiter mode + * - Currently does not support Sequences validation (so input Sequences are trusted) + * - Not compatible with frame checksum, which must be disabled + * - If any block is incompressible, will fail and return an error + * - @litSize must be == sum of all @.litLength fields in @inSeqs. Any discrepancy will generate an error. + * - @litBufCapacity is the size of the underlying buffer into which literals are written, starting at address @literals. + * @litBufCapacity must be at least 8 bytes larger than @litSize. + * - @decompressedSize must be correct, and correspond to the sum of all Sequences. Any discrepancy will generate an error. + * @return : final compressed size, or a ZSTD error code. + */ +ZSTDLIB_STATIC_API size_t +ZSTD_compressSequencesAndLiterals(ZSTD_CCtx* cctx, + void* dst, size_t dstCapacity, + const ZSTD_Sequence* inSeqs, size_t nbSequences, + const void* literals, size_t litSize, size_t litBufCapacity, + size_t decompressedSize); + + +/*! ZSTD_writeSkippableFrame() : + * Generates a zstd skippable frame containing data given by src, and writes it to dst buffer. + * + * Skippable frames begin with a 4-byte magic number. There are 16 possible choices of magic number, + * ranging from ZSTD_MAGIC_SKIPPABLE_START to ZSTD_MAGIC_SKIPPABLE_START+15. + * As such, the parameter magicVariant controls the exact skippable frame magic number variant used, + * so the magic number used will be ZSTD_MAGIC_SKIPPABLE_START + magicVariant. + * + * Returns an error if destination buffer is not large enough, if the source size is not representable + * with a 4-byte unsigned int, or if the parameter magicVariant is greater than 15 (and therefore invalid). + * + * @return : number of bytes written or a ZSTD error. + */ +ZSTDLIB_STATIC_API size_t ZSTD_writeSkippableFrame(void* dst, size_t dstCapacity, + const void* src, size_t srcSize, + unsigned magicVariant); + +/*! ZSTD_readSkippableFrame() : + * Retrieves the content of a zstd skippable frame starting at @src, and writes it to @dst buffer. + * + * The parameter @magicVariant will receive the magicVariant that was supplied when the frame was written, + * i.e. magicNumber - ZSTD_MAGIC_SKIPPABLE_START. + * This can be NULL if the caller is not interested in the magicVariant. + * + * Returns an error if destination buffer is not large enough, or if the frame is not skippable. + * + * @return : number of bytes written or a ZSTD error. + */ +ZSTDLIB_STATIC_API size_t ZSTD_readSkippableFrame(void* dst, size_t dstCapacity, + unsigned* magicVariant, + const void* src, size_t srcSize); + +/*! ZSTD_isSkippableFrame() : + * Tells if the content of `buffer` starts with a valid Frame Identifier for a skippable frame. + */ +ZSTDLIB_STATIC_API unsigned ZSTD_isSkippableFrame(const void* buffer, size_t size); + + + +/*************************************** +* Memory management +***************************************/ + +/*! ZSTD_estimate*() : + * These functions make it possible to estimate memory usage + * of a future {D,C}Ctx, before its creation. + * This is useful in combination with ZSTD_initStatic(), + * which makes it possible to employ a static buffer for ZSTD_CCtx* state. + * + * ZSTD_estimateCCtxSize() will provide a memory budget large enough + * to compress data of any size using one-shot compression ZSTD_compressCCtx() or ZSTD_compress2() + * associated with any compression level up to max specified one. + * The estimate will assume the input may be arbitrarily large, + * which is the worst case. + * + * Note that the size estimation is specific for one-shot compression, + * it is not valid for streaming (see ZSTD_estimateCStreamSize*()) + * nor other potential ways of using a ZSTD_CCtx* state. + * + * When srcSize can be bound by a known and rather "small" value, + * this knowledge can be used to provide a tighter budget estimation + * because the ZSTD_CCtx* state will need less memory for small inputs. + * This tighter estimation can be provided by employing more advanced functions + * ZSTD_estimateCCtxSize_usingCParams(), which can be used in tandem with ZSTD_getCParams(), + * and ZSTD_estimateCCtxSize_usingCCtxParams(), which can be used in tandem with ZSTD_CCtxParams_setParameter(). + * Both can be used to estimate memory using custom compression parameters and arbitrary srcSize limits. + * + * Note : only single-threaded compression is supported. + * ZSTD_estimateCCtxSize_usingCCtxParams() will return an error code if ZSTD_c_nbWorkers is >= 1. + */ +ZSTDLIB_STATIC_API size_t ZSTD_estimateCCtxSize(int maxCompressionLevel); +ZSTDLIB_STATIC_API size_t ZSTD_estimateCCtxSize_usingCParams(ZSTD_compressionParameters cParams); +ZSTDLIB_STATIC_API size_t ZSTD_estimateCCtxSize_usingCCtxParams(const ZSTD_CCtx_params* params); +ZSTDLIB_STATIC_API size_t ZSTD_estimateDCtxSize(void); + +/*! ZSTD_estimateCStreamSize() : + * ZSTD_estimateCStreamSize() will provide a memory budget large enough for streaming compression + * using any compression level up to the max specified one. + * It will also consider src size to be arbitrarily "large", which is a worst case scenario. + * If srcSize is known to always be small, ZSTD_estimateCStreamSize_usingCParams() can provide a tighter estimation. + * ZSTD_estimateCStreamSize_usingCParams() can be used in tandem with ZSTD_getCParams() to create cParams from compressionLevel. + * ZSTD_estimateCStreamSize_usingCCtxParams() can be used in tandem with ZSTD_CCtxParams_setParameter(). Only single-threaded compression is supported. This function will return an error code if ZSTD_c_nbWorkers is >= 1. + * Note : CStream size estimation is only correct for single-threaded compression. + * ZSTD_estimateCStreamSize_usingCCtxParams() will return an error code if ZSTD_c_nbWorkers is >= 1. + * Note 2 : ZSTD_estimateCStreamSize* functions are not compatible with the Block-Level Sequence Producer API at this time. + * Size estimates assume that no external sequence producer is registered. + * + * ZSTD_DStream memory budget depends on frame's window Size. + * This information can be passed manually, using ZSTD_estimateDStreamSize, + * or deducted from a valid frame Header, using ZSTD_estimateDStreamSize_fromFrame(); + * Any frame requesting a window size larger than max specified one will be rejected. + * Note : if streaming is init with function ZSTD_init?Stream_usingDict(), + * an internal ?Dict will be created, which additional size is not estimated here. + * In this case, get total size by adding ZSTD_estimate?DictSize + */ +ZSTDLIB_STATIC_API size_t ZSTD_estimateCStreamSize(int maxCompressionLevel); +ZSTDLIB_STATIC_API size_t ZSTD_estimateCStreamSize_usingCParams(ZSTD_compressionParameters cParams); +ZSTDLIB_STATIC_API size_t ZSTD_estimateCStreamSize_usingCCtxParams(const ZSTD_CCtx_params* params); +ZSTDLIB_STATIC_API size_t ZSTD_estimateDStreamSize(size_t maxWindowSize); +ZSTDLIB_STATIC_API size_t ZSTD_estimateDStreamSize_fromFrame(const void* src, size_t srcSize); + +/*! ZSTD_estimate?DictSize() : + * ZSTD_estimateCDictSize() will bet that src size is relatively "small", and content is copied, like ZSTD_createCDict(). + * ZSTD_estimateCDictSize_advanced() makes it possible to control compression parameters precisely, like ZSTD_createCDict_advanced(). + * Note : dictionaries created by reference (`ZSTD_dlm_byRef`) are logically smaller. + */ +ZSTDLIB_STATIC_API size_t ZSTD_estimateCDictSize(size_t dictSize, int compressionLevel); +ZSTDLIB_STATIC_API size_t ZSTD_estimateCDictSize_advanced(size_t dictSize, ZSTD_compressionParameters cParams, ZSTD_dictLoadMethod_e dictLoadMethod); +ZSTDLIB_STATIC_API size_t ZSTD_estimateDDictSize(size_t dictSize, ZSTD_dictLoadMethod_e dictLoadMethod); + +/*! ZSTD_initStatic*() : + * Initialize an object using a pre-allocated fixed-size buffer. + * workspace: The memory area to emplace the object into. + * Provided pointer *must be 8-bytes aligned*. + * Buffer must outlive object. + * workspaceSize: Use ZSTD_estimate*Size() to determine + * how large workspace must be to support target scenario. + * @return : pointer to object (same address as workspace, just different type), + * or NULL if error (size too small, incorrect alignment, etc.) + * Note : zstd will never resize nor malloc() when using a static buffer. + * If the object requires more memory than available, + * zstd will just error out (typically ZSTD_error_memory_allocation). + * Note 2 : there is no corresponding "free" function. + * Since workspace is allocated externally, it must be freed externally too. + * Note 3 : cParams : use ZSTD_getCParams() to convert a compression level + * into its associated cParams. + * Limitation 1 : currently not compatible with internal dictionary creation, triggered by + * ZSTD_CCtx_loadDictionary(), ZSTD_initCStream_usingDict() or ZSTD_initDStream_usingDict(). + * Limitation 2 : static cctx currently not compatible with multi-threading. + * Limitation 3 : static dctx is incompatible with legacy support. + */ +ZSTDLIB_STATIC_API ZSTD_CCtx* ZSTD_initStaticCCtx(void* workspace, size_t workspaceSize); +ZSTDLIB_STATIC_API ZSTD_CStream* ZSTD_initStaticCStream(void* workspace, size_t workspaceSize); /**< same as ZSTD_initStaticCCtx() */ + +ZSTDLIB_STATIC_API ZSTD_DCtx* ZSTD_initStaticDCtx(void* workspace, size_t workspaceSize); +ZSTDLIB_STATIC_API ZSTD_DStream* ZSTD_initStaticDStream(void* workspace, size_t workspaceSize); /**< same as ZSTD_initStaticDCtx() */ + +ZSTDLIB_STATIC_API const ZSTD_CDict* ZSTD_initStaticCDict( + void* workspace, size_t workspaceSize, + const void* dict, size_t dictSize, + ZSTD_dictLoadMethod_e dictLoadMethod, + ZSTD_dictContentType_e dictContentType, + ZSTD_compressionParameters cParams); + +ZSTDLIB_STATIC_API const ZSTD_DDict* ZSTD_initStaticDDict( + void* workspace, size_t workspaceSize, + const void* dict, size_t dictSize, + ZSTD_dictLoadMethod_e dictLoadMethod, + ZSTD_dictContentType_e dictContentType); + + +/*! Custom memory allocation : + * These prototypes make it possible to pass your own allocation/free functions. + * ZSTD_customMem is provided at creation time, using ZSTD_create*_advanced() variants listed below. + * All allocation/free operations will be completed using these custom variants instead of regular ones. + */ +typedef void* (*ZSTD_allocFunction) (void* opaque, size_t size); +typedef void (*ZSTD_freeFunction) (void* opaque, void* address); +typedef struct { ZSTD_allocFunction customAlloc; ZSTD_freeFunction customFree; void* opaque; } ZSTD_customMem; +#if defined(__clang__) && __clang_major__ >= 5 +#pragma clang diagnostic push +#pragma clang diagnostic ignored "-Wzero-as-null-pointer-constant" +#endif +static +#ifdef __GNUC__ +__attribute__((__unused__)) +#endif +ZSTD_customMem const ZSTD_defaultCMem = { NULL, NULL, NULL }; /**< this constant defers to stdlib's functions */ +#if defined(__clang__) && __clang_major__ >= 5 +#pragma clang diagnostic pop +#endif + +ZSTDLIB_STATIC_API ZSTD_CCtx* ZSTD_createCCtx_advanced(ZSTD_customMem customMem); +ZSTDLIB_STATIC_API ZSTD_CStream* ZSTD_createCStream_advanced(ZSTD_customMem customMem); +ZSTDLIB_STATIC_API ZSTD_DCtx* ZSTD_createDCtx_advanced(ZSTD_customMem customMem); +ZSTDLIB_STATIC_API ZSTD_DStream* ZSTD_createDStream_advanced(ZSTD_customMem customMem); + +ZSTDLIB_STATIC_API ZSTD_CDict* ZSTD_createCDict_advanced(const void* dict, size_t dictSize, + ZSTD_dictLoadMethod_e dictLoadMethod, + ZSTD_dictContentType_e dictContentType, + ZSTD_compressionParameters cParams, + ZSTD_customMem customMem); + +/*! Thread pool : + * These prototypes make it possible to share a thread pool among multiple compression contexts. + * This can limit resources for applications with multiple threads where each one uses + * a threaded compression mode (via ZSTD_c_nbWorkers parameter). + * ZSTD_createThreadPool creates a new thread pool with a given number of threads. + * Note that the lifetime of such pool must exist while being used. + * ZSTD_CCtx_refThreadPool assigns a thread pool to a context (use NULL argument value + * to use an internal thread pool). + * ZSTD_freeThreadPool frees a thread pool, accepts NULL pointer. + */ +typedef struct POOL_ctx_s ZSTD_threadPool; +ZSTDLIB_STATIC_API ZSTD_threadPool* ZSTD_createThreadPool(size_t numThreads); +ZSTDLIB_STATIC_API void ZSTD_freeThreadPool (ZSTD_threadPool* pool); /* accept NULL pointer */ +ZSTDLIB_STATIC_API size_t ZSTD_CCtx_refThreadPool(ZSTD_CCtx* cctx, ZSTD_threadPool* pool); + + +/* + * This API is temporary and is expected to change or disappear in the future! + */ +ZSTDLIB_STATIC_API ZSTD_CDict* ZSTD_createCDict_advanced2( + const void* dict, size_t dictSize, + ZSTD_dictLoadMethod_e dictLoadMethod, + ZSTD_dictContentType_e dictContentType, + const ZSTD_CCtx_params* cctxParams, + ZSTD_customMem customMem); + +ZSTDLIB_STATIC_API ZSTD_DDict* ZSTD_createDDict_advanced( + const void* dict, size_t dictSize, + ZSTD_dictLoadMethod_e dictLoadMethod, + ZSTD_dictContentType_e dictContentType, + ZSTD_customMem customMem); + + +/*************************************** +* Advanced compression functions +***************************************/ + +/*! ZSTD_createCDict_byReference() : + * Create a digested dictionary for compression + * Dictionary content is just referenced, not duplicated. + * As a consequence, `dictBuffer` **must** outlive CDict, + * and its content must remain unmodified throughout the lifetime of CDict. + * note: equivalent to ZSTD_createCDict_advanced(), with dictLoadMethod==ZSTD_dlm_byRef */ +ZSTDLIB_STATIC_API ZSTD_CDict* ZSTD_createCDict_byReference(const void* dictBuffer, size_t dictSize, int compressionLevel); + +/*! ZSTD_getCParams() : + * @return ZSTD_compressionParameters structure for a selected compression level and estimated srcSize. + * `estimatedSrcSize` value is optional, select 0 if not known */ +ZSTDLIB_STATIC_API ZSTD_compressionParameters ZSTD_getCParams(int compressionLevel, unsigned long long estimatedSrcSize, size_t dictSize); + +/*! ZSTD_getParams() : + * same as ZSTD_getCParams(), but @return a full `ZSTD_parameters` object instead of sub-component `ZSTD_compressionParameters`. + * All fields of `ZSTD_frameParameters` are set to default : contentSize=1, checksum=0, noDictID=0 */ +ZSTDLIB_STATIC_API ZSTD_parameters ZSTD_getParams(int compressionLevel, unsigned long long estimatedSrcSize, size_t dictSize); + +/*! ZSTD_checkCParams() : + * Ensure param values remain within authorized range. + * @return 0 on success, or an error code (can be checked with ZSTD_isError()) */ +ZSTDLIB_STATIC_API size_t ZSTD_checkCParams(ZSTD_compressionParameters params); + +/*! ZSTD_adjustCParams() : + * optimize params for a given `srcSize` and `dictSize`. + * `srcSize` can be unknown, in which case use ZSTD_CONTENTSIZE_UNKNOWN. + * `dictSize` must be `0` when there is no dictionary. + * cPar can be invalid : all parameters will be clamped within valid range in the @return struct. + * This function never fails (wide contract) */ +ZSTDLIB_STATIC_API ZSTD_compressionParameters ZSTD_adjustCParams(ZSTD_compressionParameters cPar, unsigned long long srcSize, size_t dictSize); + +/*! ZSTD_CCtx_setCParams() : + * Set all parameters provided within @p cparams into the working @p cctx. + * Note : if modifying parameters during compression (MT mode only), + * note that changes to the .windowLog parameter will be ignored. + * @return 0 on success, or an error code (can be checked with ZSTD_isError()). + * On failure, no parameters are updated. + */ +ZSTDLIB_STATIC_API size_t ZSTD_CCtx_setCParams(ZSTD_CCtx* cctx, ZSTD_compressionParameters cparams); + +/*! ZSTD_CCtx_setFParams() : + * Set all parameters provided within @p fparams into the working @p cctx. + * @return 0 on success, or an error code (can be checked with ZSTD_isError()). + */ +ZSTDLIB_STATIC_API size_t ZSTD_CCtx_setFParams(ZSTD_CCtx* cctx, ZSTD_frameParameters fparams); + +/*! ZSTD_CCtx_setParams() : + * Set all parameters provided within @p params into the working @p cctx. + * @return 0 on success, or an error code (can be checked with ZSTD_isError()). + */ +ZSTDLIB_STATIC_API size_t ZSTD_CCtx_setParams(ZSTD_CCtx* cctx, ZSTD_parameters params); + +/*! ZSTD_compress_advanced() : + * Note : this function is now DEPRECATED. + * It can be replaced by ZSTD_compress2(), in combination with ZSTD_CCtx_setParameter() and other parameter setters. + * This prototype will generate compilation warnings. */ +ZSTD_DEPRECATED("use ZSTD_compress2") +ZSTDLIB_STATIC_API +size_t ZSTD_compress_advanced(ZSTD_CCtx* cctx, + void* dst, size_t dstCapacity, + const void* src, size_t srcSize, + const void* dict,size_t dictSize, + ZSTD_parameters params); + +/*! ZSTD_compress_usingCDict_advanced() : + * Note : this function is now DEPRECATED. + * It can be replaced by ZSTD_compress2(), in combination with ZSTD_CCtx_loadDictionary() and other parameter setters. + * This prototype will generate compilation warnings. */ +ZSTD_DEPRECATED("use ZSTD_compress2 with ZSTD_CCtx_loadDictionary") +ZSTDLIB_STATIC_API +size_t ZSTD_compress_usingCDict_advanced(ZSTD_CCtx* cctx, + void* dst, size_t dstCapacity, + const void* src, size_t srcSize, + const ZSTD_CDict* cdict, + ZSTD_frameParameters fParams); + + +/*! ZSTD_CCtx_loadDictionary_byReference() : + * Same as ZSTD_CCtx_loadDictionary(), but dictionary content is referenced, instead of being copied into CCtx. + * It saves some memory, but also requires that `dict` outlives its usage within `cctx` */ +ZSTDLIB_STATIC_API size_t ZSTD_CCtx_loadDictionary_byReference(ZSTD_CCtx* cctx, const void* dict, size_t dictSize); + +/*! ZSTD_CCtx_loadDictionary_advanced() : + * Same as ZSTD_CCtx_loadDictionary(), but gives finer control over + * how to load the dictionary (by copy ? by reference ?) + * and how to interpret it (automatic ? force raw mode ? full mode only ?) */ +ZSTDLIB_STATIC_API size_t ZSTD_CCtx_loadDictionary_advanced(ZSTD_CCtx* cctx, const void* dict, size_t dictSize, ZSTD_dictLoadMethod_e dictLoadMethod, ZSTD_dictContentType_e dictContentType); + +/*! ZSTD_CCtx_refPrefix_advanced() : + * Same as ZSTD_CCtx_refPrefix(), but gives finer control over + * how to interpret prefix content (automatic ? force raw mode (default) ? full mode only ?) */ +ZSTDLIB_STATIC_API size_t ZSTD_CCtx_refPrefix_advanced(ZSTD_CCtx* cctx, const void* prefix, size_t prefixSize, ZSTD_dictContentType_e dictContentType); + +/* === experimental parameters === */ +/* these parameters can be used with ZSTD_setParameter() + * they are not guaranteed to remain supported in the future */ + + /* Enables rsyncable mode, + * which makes compressed files more rsync friendly + * by adding periodic synchronization points to the compressed data. + * The target average block size is ZSTD_c_jobSize / 2. + * It's possible to modify the job size to increase or decrease + * the granularity of the synchronization point. + * Once the jobSize is smaller than the window size, + * it will result in compression ratio degradation. + * NOTE 1: rsyncable mode only works when multithreading is enabled. + * NOTE 2: rsyncable performs poorly in combination with long range mode, + * since it will decrease the effectiveness of synchronization points, + * though mileage may vary. + * NOTE 3: Rsyncable mode limits maximum compression speed to ~400 MB/s. + * If the selected compression level is already running significantly slower, + * the overall speed won't be significantly impacted. + */ + #define ZSTD_c_rsyncable ZSTD_c_experimentalParam1 + +/* Select a compression format. + * The value must be of type ZSTD_format_e. + * See ZSTD_format_e enum definition for details */ +#define ZSTD_c_format ZSTD_c_experimentalParam2 + +/* Force back-reference distances to remain < windowSize, + * even when referencing into Dictionary content (default:0) */ +#define ZSTD_c_forceMaxWindow ZSTD_c_experimentalParam3 + +/* Controls whether the contents of a CDict + * are used in place, or copied into the working context. + * Accepts values from the ZSTD_dictAttachPref_e enum. + * See the comments on that enum for an explanation of the feature. */ +#define ZSTD_c_forceAttachDict ZSTD_c_experimentalParam4 + +/* Controlled with ZSTD_ParamSwitch_e enum. + * Default is ZSTD_ps_auto. + * Set to ZSTD_ps_disable to never compress literals. + * Set to ZSTD_ps_enable to always compress literals. (Note: uncompressed literals + * may still be emitted if huffman is not beneficial to use.) + * + * By default, in ZSTD_ps_auto, the library will decide at runtime whether to use + * literals compression based on the compression parameters - specifically, + * negative compression levels do not use literal compression. + */ +#define ZSTD_c_literalCompressionMode ZSTD_c_experimentalParam5 + +/* User's best guess of source size. + * Hint is not valid when srcSizeHint == 0. + * There is no guarantee that hint is close to actual source size, + * but compression ratio may regress significantly if guess considerably underestimates */ +#define ZSTD_c_srcSizeHint ZSTD_c_experimentalParam7 + +/* Controls whether the new and experimental "dedicated dictionary search + * structure" can be used. This feature is still rough around the edges, be + * prepared for surprising behavior! + * + * How to use it: + * + * When using a CDict, whether to use this feature or not is controlled at + * CDict creation, and it must be set in a CCtxParams set passed into that + * construction (via ZSTD_createCDict_advanced2()). A compression will then + * use the feature or not based on how the CDict was constructed; the value of + * this param, set in the CCtx, will have no effect. + * + * However, when a dictionary buffer is passed into a CCtx, such as via + * ZSTD_CCtx_loadDictionary(), this param can be set on the CCtx to control + * whether the CDict that is created internally can use the feature or not. + * + * What it does: + * + * Normally, the internal data structures of the CDict are analogous to what + * would be stored in a CCtx after compressing the contents of a dictionary. + * To an approximation, a compression using a dictionary can then use those + * data structures to simply continue what is effectively a streaming + * compression where the simulated compression of the dictionary left off. + * Which is to say, the search structures in the CDict are normally the same + * format as in the CCtx. + * + * It is possible to do better, since the CDict is not like a CCtx: the search + * structures are written once during CDict creation, and then are only read + * after that, while the search structures in the CCtx are both read and + * written as the compression goes along. This means we can choose a search + * structure for the dictionary that is read-optimized. + * + * This feature enables the use of that different structure. + * + * Note that some of the members of the ZSTD_compressionParameters struct have + * different semantics and constraints in the dedicated search structure. It is + * highly recommended that you simply set a compression level in the CCtxParams + * you pass into the CDict creation call, and avoid messing with the cParams + * directly. + * + * Effects: + * + * This will only have any effect when the selected ZSTD_strategy + * implementation supports this feature. Currently, that's limited to + * ZSTD_greedy, ZSTD_lazy, and ZSTD_lazy2. + * + * Note that this means that the CDict tables can no longer be copied into the + * CCtx, so the dict attachment mode ZSTD_dictForceCopy will no longer be + * usable. The dictionary can only be attached or reloaded. + * + * In general, you should expect compression to be faster--sometimes very much + * so--and CDict creation to be slightly slower. Eventually, we will probably + * make this mode the default. + */ +#define ZSTD_c_enableDedicatedDictSearch ZSTD_c_experimentalParam8 + +/* ZSTD_c_stableInBuffer + * Experimental parameter. + * Default is 0 == disabled. Set to 1 to enable. + * + * Tells the compressor that input data presented with ZSTD_inBuffer + * will ALWAYS be the same between calls. + * Technically, the @src pointer must never be changed, + * and the @pos field can only be updated by zstd. + * However, it's possible to increase the @size field, + * allowing scenarios where more data can be appended after compressions starts. + * These conditions are checked by the compressor, + * and compression will fail if they are not respected. + * Also, data in the ZSTD_inBuffer within the range [src, src + pos) + * MUST not be modified during compression or it will result in data corruption. + * + * When this flag is enabled zstd won't allocate an input window buffer, + * because the user guarantees it can reference the ZSTD_inBuffer until + * the frame is complete. But, it will still allocate an output buffer + * large enough to fit a block (see ZSTD_c_stableOutBuffer). This will also + * avoid the memcpy() from the input buffer to the input window buffer. + * + * NOTE: So long as the ZSTD_inBuffer always points to valid memory, using + * this flag is ALWAYS memory safe, and will never access out-of-bounds + * memory. However, compression WILL fail if conditions are not respected. + * + * WARNING: The data in the ZSTD_inBuffer in the range [src, src + pos) MUST + * not be modified during compression or it will result in data corruption. + * This is because zstd needs to reference data in the ZSTD_inBuffer to find + * matches. Normally zstd maintains its own window buffer for this purpose, + * but passing this flag tells zstd to rely on user provided buffer instead. + */ +#define ZSTD_c_stableInBuffer ZSTD_c_experimentalParam9 + +/* ZSTD_c_stableOutBuffer + * Experimental parameter. + * Default is 0 == disabled. Set to 1 to enable. + * + * Tells he compressor that the ZSTD_outBuffer will not be resized between + * calls. Specifically: (out.size - out.pos) will never grow. This gives the + * compressor the freedom to say: If the compressed data doesn't fit in the + * output buffer then return ZSTD_error_dstSizeTooSmall. This allows us to + * always decompress directly into the output buffer, instead of decompressing + * into an internal buffer and copying to the output buffer. + * + * When this flag is enabled zstd won't allocate an output buffer, because + * it can write directly to the ZSTD_outBuffer. It will still allocate the + * input window buffer (see ZSTD_c_stableInBuffer). + * + * Zstd will check that (out.size - out.pos) never grows and return an error + * if it does. While not strictly necessary, this should prevent surprises. + */ +#define ZSTD_c_stableOutBuffer ZSTD_c_experimentalParam10 + +/* ZSTD_c_blockDelimiters + * Default is 0 == ZSTD_sf_noBlockDelimiters. + * + * For use with sequence compression API: ZSTD_compressSequences(). + * + * Designates whether or not the given array of ZSTD_Sequence contains block delimiters + * and last literals, which are defined as sequences with offset == 0 and matchLength == 0. + * See the definition of ZSTD_Sequence for more specifics. + */ +#define ZSTD_c_blockDelimiters ZSTD_c_experimentalParam11 + +/* ZSTD_c_validateSequences + * Default is 0 == disabled. Set to 1 to enable sequence validation. + * + * For use with sequence compression API: ZSTD_compressSequences*(). + * Designates whether or not provided sequences are validated within ZSTD_compressSequences*() + * during function execution. + * + * When Sequence validation is disabled (default), Sequences are compressed as-is, + * so they must correct, otherwise it would result in a corruption error. + * + * Sequence validation adds some protection, by ensuring that all values respect boundary conditions. + * If a Sequence is detected invalid (see doc/zstd_compression_format.md for + * specifics regarding offset/matchlength requirements) then the function will bail out and + * return an error. + */ +#define ZSTD_c_validateSequences ZSTD_c_experimentalParam12 + +/* ZSTD_c_blockSplitterLevel + * note: this parameter only influences the first splitter stage, + * which is active before producing the sequences. + * ZSTD_c_splitAfterSequences controls the next splitter stage, + * which is active after sequence production. + * Note that both can be combined. + * Allowed values are between 0 and ZSTD_BLOCKSPLITTER_LEVEL_MAX included. + * 0 means "auto", which will select a value depending on current ZSTD_c_strategy. + * 1 means no splitting. + * Then, values from 2 to 6 are sorted in increasing cpu load order. + * + * Note that currently the first block is never split, + * to ensure expansion guarantees in presence of incompressible data. + */ +#define ZSTD_BLOCKSPLITTER_LEVEL_MAX 6 +#define ZSTD_c_blockSplitterLevel ZSTD_c_experimentalParam20 + +/* ZSTD_c_splitAfterSequences + * This is a stronger splitter algorithm, + * based on actual sequences previously produced by the selected parser. + * It's also slower, and as a consequence, mostly used for high compression levels. + * While the post-splitter does overlap with the pre-splitter, + * both can nonetheless be combined, + * notably with ZSTD_c_blockSplitterLevel at ZSTD_BLOCKSPLITTER_LEVEL_MAX, + * resulting in higher compression ratio than just one of them. + * + * Default is ZSTD_ps_auto. + * Set to ZSTD_ps_disable to never use block splitter. + * Set to ZSTD_ps_enable to always use block splitter. + * + * By default, in ZSTD_ps_auto, the library will decide at runtime whether to use + * block splitting based on the compression parameters. + */ +#define ZSTD_c_splitAfterSequences ZSTD_c_experimentalParam13 + +/* ZSTD_c_useRowMatchFinder + * Controlled with ZSTD_ParamSwitch_e enum. + * Default is ZSTD_ps_auto. + * Set to ZSTD_ps_disable to never use row-based matchfinder. + * Set to ZSTD_ps_enable to force usage of row-based matchfinder. + * + * By default, in ZSTD_ps_auto, the library will decide at runtime whether to use + * the row-based matchfinder based on support for SIMD instructions and the window log. + * Note that this only pertains to compression strategies: greedy, lazy, and lazy2 + */ +#define ZSTD_c_useRowMatchFinder ZSTD_c_experimentalParam14 + +/* ZSTD_c_deterministicRefPrefix + * Default is 0 == disabled. Set to 1 to enable. + * + * Zstd produces different results for prefix compression when the prefix is + * directly adjacent to the data about to be compressed vs. when it isn't. + * This is because zstd detects that the two buffers are contiguous and it can + * use a more efficient match finding algorithm. However, this produces different + * results than when the two buffers are non-contiguous. This flag forces zstd + * to always load the prefix in non-contiguous mode, even if it happens to be + * adjacent to the data, to guarantee determinism. + * + * If you really care about determinism when using a dictionary or prefix, + * like when doing delta compression, you should select this option. It comes + * at a speed penalty of about ~2.5% if the dictionary and data happened to be + * contiguous, and is free if they weren't contiguous. We don't expect that + * intentionally making the dictionary and data contiguous will be worth the + * cost to memcpy() the data. + */ +#define ZSTD_c_deterministicRefPrefix ZSTD_c_experimentalParam15 + +/* ZSTD_c_prefetchCDictTables + * Controlled with ZSTD_ParamSwitch_e enum. Default is ZSTD_ps_auto. + * + * In some situations, zstd uses CDict tables in-place rather than copying them + * into the working context. (See docs on ZSTD_dictAttachPref_e above for details). + * In such situations, compression speed is seriously impacted when CDict tables are + * "cold" (outside CPU cache). This parameter instructs zstd to prefetch CDict tables + * when they are used in-place. + * + * For sufficiently small inputs, the cost of the prefetch will outweigh the benefit. + * For sufficiently large inputs, zstd will by default memcpy() CDict tables + * into the working context, so there is no need to prefetch. This parameter is + * targeted at a middle range of input sizes, where a prefetch is cheap enough to be + * useful but memcpy() is too expensive. The exact range of input sizes where this + * makes sense is best determined by careful experimentation. + * + * Note: for this parameter, ZSTD_ps_auto is currently equivalent to ZSTD_ps_disable, + * but in the future zstd may conditionally enable this feature via an auto-detection + * heuristic for cold CDicts. + * Use ZSTD_ps_disable to opt out of prefetching under any circumstances. + */ +#define ZSTD_c_prefetchCDictTables ZSTD_c_experimentalParam16 + +/* ZSTD_c_enableSeqProducerFallback + * Allowed values are 0 (disable) and 1 (enable). The default setting is 0. + * + * Controls whether zstd will fall back to an internal sequence producer if an + * external sequence producer is registered and returns an error code. This fallback + * is block-by-block: the internal sequence producer will only be called for blocks + * where the external sequence producer returns an error code. Fallback parsing will + * follow any other cParam settings, such as compression level, the same as in a + * normal (fully-internal) compression operation. + * + * The user is strongly encouraged to read the full Block-Level Sequence Producer API + * documentation (below) before setting this parameter. */ +#define ZSTD_c_enableSeqProducerFallback ZSTD_c_experimentalParam17 + +/* ZSTD_c_maxBlockSize + * Allowed values are between 1KB and ZSTD_BLOCKSIZE_MAX (128KB). + * The default is ZSTD_BLOCKSIZE_MAX, and setting to 0 will set to the default. + * + * This parameter can be used to set an upper bound on the blocksize + * that overrides the default ZSTD_BLOCKSIZE_MAX. It cannot be used to set upper + * bounds greater than ZSTD_BLOCKSIZE_MAX or bounds lower than 1KB (will make + * compressBound() inaccurate). Only currently meant to be used for testing. + */ +#define ZSTD_c_maxBlockSize ZSTD_c_experimentalParam18 + +/* ZSTD_c_repcodeResolution + * This parameter only has an effect if ZSTD_c_blockDelimiters is + * set to ZSTD_sf_explicitBlockDelimiters (may change in the future). + * + * This parameter affects how zstd parses external sequences, + * provided via the ZSTD_compressSequences*() API + * or from an external block-level sequence producer. + * + * If set to ZSTD_ps_enable, the library will check for repeated offsets within + * external sequences, even if those repcodes are not explicitly indicated in + * the "rep" field. Note that this is the only way to exploit repcode matches + * while using compressSequences*() or an external sequence producer, since zstd + * currently ignores the "rep" field of external sequences. + * + * If set to ZSTD_ps_disable, the library will not exploit repeated offsets in + * external sequences, regardless of whether the "rep" field has been set. This + * reduces sequence compression overhead by about 25% while sacrificing some + * compression ratio. + * + * The default value is ZSTD_ps_auto, for which the library will enable/disable + * based on compression level (currently: level<10 disables, level>=10 enables). + */ +#define ZSTD_c_repcodeResolution ZSTD_c_experimentalParam19 +#define ZSTD_c_searchForExternalRepcodes ZSTD_c_experimentalParam19 /* older name */ + + +/*! ZSTD_CCtx_getParameter() : + * Get the requested compression parameter value, selected by enum ZSTD_cParameter, + * and store it into int* value. + * @return : 0, or an error code (which can be tested with ZSTD_isError()). + */ +ZSTDLIB_STATIC_API size_t ZSTD_CCtx_getParameter(const ZSTD_CCtx* cctx, ZSTD_cParameter param, int* value); + + +/*! ZSTD_CCtx_params : + * Quick howto : + * - ZSTD_createCCtxParams() : Create a ZSTD_CCtx_params structure + * - ZSTD_CCtxParams_setParameter() : Push parameters one by one into + * an existing ZSTD_CCtx_params structure. + * This is similar to + * ZSTD_CCtx_setParameter(). + * - ZSTD_CCtx_setParametersUsingCCtxParams() : Apply parameters to + * an existing CCtx. + * These parameters will be applied to + * all subsequent frames. + * - ZSTD_compressStream2() : Do compression using the CCtx. + * - ZSTD_freeCCtxParams() : Free the memory, accept NULL pointer. + * + * This can be used with ZSTD_estimateCCtxSize_advanced_usingCCtxParams() + * for static allocation of CCtx for single-threaded compression. + */ +ZSTDLIB_STATIC_API ZSTD_CCtx_params* ZSTD_createCCtxParams(void); +ZSTDLIB_STATIC_API size_t ZSTD_freeCCtxParams(ZSTD_CCtx_params* params); /* accept NULL pointer */ + +/*! ZSTD_CCtxParams_reset() : + * Reset params to default values. + */ +ZSTDLIB_STATIC_API size_t ZSTD_CCtxParams_reset(ZSTD_CCtx_params* params); + +/*! ZSTD_CCtxParams_init() : + * Initializes the compression parameters of cctxParams according to + * compression level. All other parameters are reset to their default values. + */ +ZSTDLIB_STATIC_API size_t ZSTD_CCtxParams_init(ZSTD_CCtx_params* cctxParams, int compressionLevel); + +/*! ZSTD_CCtxParams_init_advanced() : + * Initializes the compression and frame parameters of cctxParams according to + * params. All other parameters are reset to their default values. + */ +ZSTDLIB_STATIC_API size_t ZSTD_CCtxParams_init_advanced(ZSTD_CCtx_params* cctxParams, ZSTD_parameters params); + +/*! ZSTD_CCtxParams_setParameter() : Requires v1.4.0+ + * Similar to ZSTD_CCtx_setParameter. + * Set one compression parameter, selected by enum ZSTD_cParameter. + * Parameters must be applied to a ZSTD_CCtx using + * ZSTD_CCtx_setParametersUsingCCtxParams(). + * @result : a code representing success or failure (which can be tested with + * ZSTD_isError()). + */ +ZSTDLIB_STATIC_API size_t ZSTD_CCtxParams_setParameter(ZSTD_CCtx_params* params, ZSTD_cParameter param, int value); + +/*! ZSTD_CCtxParams_getParameter() : + * Similar to ZSTD_CCtx_getParameter. + * Get the requested value of one compression parameter, selected by enum ZSTD_cParameter. + * @result : 0, or an error code (which can be tested with ZSTD_isError()). + */ +ZSTDLIB_STATIC_API size_t ZSTD_CCtxParams_getParameter(const ZSTD_CCtx_params* params, ZSTD_cParameter param, int* value); + +/*! ZSTD_CCtx_setParametersUsingCCtxParams() : + * Apply a set of ZSTD_CCtx_params to the compression context. + * This can be done even after compression is started, + * if nbWorkers==0, this will have no impact until a new compression is started. + * if nbWorkers>=1, new parameters will be picked up at next job, + * with a few restrictions (windowLog, pledgedSrcSize, nbWorkers, jobSize, and overlapLog are not updated). + */ +ZSTDLIB_STATIC_API size_t ZSTD_CCtx_setParametersUsingCCtxParams( + ZSTD_CCtx* cctx, const ZSTD_CCtx_params* params); + +/*! ZSTD_compressStream2_simpleArgs() : + * Same as ZSTD_compressStream2(), + * but using only integral types as arguments. + * This variant might be helpful for binders from dynamic languages + * which have troubles handling structures containing memory pointers. + */ +ZSTDLIB_STATIC_API size_t ZSTD_compressStream2_simpleArgs ( + ZSTD_CCtx* cctx, + void* dst, size_t dstCapacity, size_t* dstPos, + const void* src, size_t srcSize, size_t* srcPos, + ZSTD_EndDirective endOp); + + +/*************************************** +* Advanced decompression functions +***************************************/ + +/*! ZSTD_isFrame() : + * Tells if the content of `buffer` starts with a valid Frame Identifier. + * Note : Frame Identifier is 4 bytes. If `size < 4`, @return will always be 0. + * Note 2 : Legacy Frame Identifiers are considered valid only if Legacy Support is enabled. + * Note 3 : Skippable Frame Identifiers are considered valid. */ +ZSTDLIB_STATIC_API unsigned ZSTD_isFrame(const void* buffer, size_t size); + +/*! ZSTD_createDDict_byReference() : + * Create a digested dictionary, ready to start decompression operation without startup delay. + * Dictionary content is referenced, and therefore stays in dictBuffer. + * It is important that dictBuffer outlives DDict, + * it must remain read accessible throughout the lifetime of DDict */ +ZSTDLIB_STATIC_API ZSTD_DDict* ZSTD_createDDict_byReference(const void* dictBuffer, size_t dictSize); + +/*! ZSTD_DCtx_loadDictionary_byReference() : + * Same as ZSTD_DCtx_loadDictionary(), + * but references `dict` content instead of copying it into `dctx`. + * This saves memory if `dict` remains around., + * However, it's imperative that `dict` remains accessible (and unmodified) while being used, so it must outlive decompression. */ +ZSTDLIB_STATIC_API size_t ZSTD_DCtx_loadDictionary_byReference(ZSTD_DCtx* dctx, const void* dict, size_t dictSize); + +/*! ZSTD_DCtx_loadDictionary_advanced() : + * Same as ZSTD_DCtx_loadDictionary(), + * but gives direct control over + * how to load the dictionary (by copy ? by reference ?) + * and how to interpret it (automatic ? force raw mode ? full mode only ?). */ +ZSTDLIB_STATIC_API size_t ZSTD_DCtx_loadDictionary_advanced(ZSTD_DCtx* dctx, const void* dict, size_t dictSize, ZSTD_dictLoadMethod_e dictLoadMethod, ZSTD_dictContentType_e dictContentType); + +/*! ZSTD_DCtx_refPrefix_advanced() : + * Same as ZSTD_DCtx_refPrefix(), but gives finer control over + * how to interpret prefix content (automatic ? force raw mode (default) ? full mode only ?) */ +ZSTDLIB_STATIC_API size_t ZSTD_DCtx_refPrefix_advanced(ZSTD_DCtx* dctx, const void* prefix, size_t prefixSize, ZSTD_dictContentType_e dictContentType); + +/*! ZSTD_DCtx_setMaxWindowSize() : + * Refuses allocating internal buffers for frames requiring a window size larger than provided limit. + * This protects a decoder context from reserving too much memory for itself (potential attack scenario). + * This parameter is only useful in streaming mode, since no internal buffer is allocated in single-pass mode. + * By default, a decompression context accepts all window sizes <= (1 << ZSTD_WINDOWLOG_LIMIT_DEFAULT) + * @return : 0, or an error code (which can be tested using ZSTD_isError()). + */ +ZSTDLIB_STATIC_API size_t ZSTD_DCtx_setMaxWindowSize(ZSTD_DCtx* dctx, size_t maxWindowSize); + +/*! ZSTD_DCtx_getParameter() : + * Get the requested decompression parameter value, selected by enum ZSTD_dParameter, + * and store it into int* value. + * @return : 0, or an error code (which can be tested with ZSTD_isError()). + */ +ZSTDLIB_STATIC_API size_t ZSTD_DCtx_getParameter(ZSTD_DCtx* dctx, ZSTD_dParameter param, int* value); + +/* ZSTD_d_format + * experimental parameter, + * allowing selection between ZSTD_format_e input compression formats + */ +#define ZSTD_d_format ZSTD_d_experimentalParam1 +/* ZSTD_d_stableOutBuffer + * Experimental parameter. + * Default is 0 == disabled. Set to 1 to enable. + * + * Tells the decompressor that the ZSTD_outBuffer will ALWAYS be the same + * between calls, except for the modifications that zstd makes to pos (the + * caller must not modify pos). This is checked by the decompressor, and + * decompression will fail if it ever changes. Therefore the ZSTD_outBuffer + * MUST be large enough to fit the entire decompressed frame. This will be + * checked when the frame content size is known. The data in the ZSTD_outBuffer + * in the range [dst, dst + pos) MUST not be modified during decompression + * or you will get data corruption. + * + * When this flag is enabled zstd won't allocate an output buffer, because + * it can write directly to the ZSTD_outBuffer, but it will still allocate + * an input buffer large enough to fit any compressed block. This will also + * avoid the memcpy() from the internal output buffer to the ZSTD_outBuffer. + * If you need to avoid the input buffer allocation use the buffer-less + * streaming API. + * + * NOTE: So long as the ZSTD_outBuffer always points to valid memory, using + * this flag is ALWAYS memory safe, and will never access out-of-bounds + * memory. However, decompression WILL fail if you violate the preconditions. + * + * WARNING: The data in the ZSTD_outBuffer in the range [dst, dst + pos) MUST + * not be modified during decompression or you will get data corruption. This + * is because zstd needs to reference data in the ZSTD_outBuffer to regenerate + * matches. Normally zstd maintains its own buffer for this purpose, but passing + * this flag tells zstd to use the user provided buffer. + */ +#define ZSTD_d_stableOutBuffer ZSTD_d_experimentalParam2 + +/* ZSTD_d_forceIgnoreChecksum + * Experimental parameter. + * Default is 0 == disabled. Set to 1 to enable + * + * Tells the decompressor to skip checksum validation during decompression, regardless + * of whether checksumming was specified during compression. This offers some + * slight performance benefits, and may be useful for debugging. + * Param has values of type ZSTD_forceIgnoreChecksum_e + */ +#define ZSTD_d_forceIgnoreChecksum ZSTD_d_experimentalParam3 + +/* ZSTD_d_refMultipleDDicts + * Experimental parameter. + * Default is 0 == disabled. Set to 1 to enable + * + * If enabled and dctx is allocated on the heap, then additional memory will be allocated + * to store references to multiple ZSTD_DDict. That is, multiple calls of ZSTD_refDDict() + * using a given ZSTD_DCtx, rather than overwriting the previous DDict reference, will instead + * store all references. At decompression time, the appropriate dictID is selected + * from the set of DDicts based on the dictID in the frame. + * + * Usage is simply calling ZSTD_refDDict() on multiple dict buffers. + * + * Param has values of byte ZSTD_refMultipleDDicts_e + * + * WARNING: Enabling this parameter and calling ZSTD_DCtx_refDDict(), will trigger memory + * allocation for the hash table. ZSTD_freeDCtx() also frees this memory. + * Memory is allocated as per ZSTD_DCtx::customMem. + * + * Although this function allocates memory for the table, the user is still responsible for + * memory management of the underlying ZSTD_DDict* themselves. + */ +#define ZSTD_d_refMultipleDDicts ZSTD_d_experimentalParam4 + +/* ZSTD_d_disableHuffmanAssembly + * Set to 1 to disable the Huffman assembly implementation. + * The default value is 0, which allows zstd to use the Huffman assembly + * implementation if available. + * + * This parameter can be used to disable Huffman assembly at runtime. + * If you want to disable it at compile time you can define the macro + * ZSTD_DISABLE_ASM. + */ +#define ZSTD_d_disableHuffmanAssembly ZSTD_d_experimentalParam5 + +/* ZSTD_d_maxBlockSize + * Allowed values are between 1KB and ZSTD_BLOCKSIZE_MAX (128KB). + * The default is ZSTD_BLOCKSIZE_MAX, and setting to 0 will set to the default. + * + * Forces the decompressor to reject blocks whose content size is + * larger than the configured maxBlockSize. When maxBlockSize is + * larger than the windowSize, the windowSize is used instead. + * This saves memory on the decoder when you know all blocks are small. + * + * This option is typically used in conjunction with ZSTD_c_maxBlockSize. + * + * WARNING: This causes the decoder to reject otherwise valid frames + * that have block sizes larger than the configured maxBlockSize. + */ +#define ZSTD_d_maxBlockSize ZSTD_d_experimentalParam6 + + +/*! ZSTD_DCtx_setFormat() : + * This function is REDUNDANT. Prefer ZSTD_DCtx_setParameter(). + * Instruct the decoder context about what kind of data to decode next. + * This instruction is mandatory to decode data without a fully-formed header, + * such ZSTD_f_zstd1_magicless for example. + * @return : 0, or an error code (which can be tested using ZSTD_isError()). */ +ZSTD_DEPRECATED("use ZSTD_DCtx_setParameter() instead") +ZSTDLIB_STATIC_API +size_t ZSTD_DCtx_setFormat(ZSTD_DCtx* dctx, ZSTD_format_e format); + +/*! ZSTD_decompressStream_simpleArgs() : + * Same as ZSTD_decompressStream(), + * but using only integral types as arguments. + * This can be helpful for binders from dynamic languages + * which have troubles handling structures containing memory pointers. + */ +ZSTDLIB_STATIC_API size_t ZSTD_decompressStream_simpleArgs ( + ZSTD_DCtx* dctx, + void* dst, size_t dstCapacity, size_t* dstPos, + const void* src, size_t srcSize, size_t* srcPos); + + +/******************************************************************** +* Advanced streaming functions +* Warning : most of these functions are now redundant with the Advanced API. +* Once Advanced API reaches "stable" status, +* redundant functions will be deprecated, and then at some point removed. +********************************************************************/ + +/*===== Advanced Streaming compression functions =====*/ + +/*! ZSTD_initCStream_srcSize() : + * This function is DEPRECATED, and equivalent to: + * ZSTD_CCtx_reset(zcs, ZSTD_reset_session_only); + * ZSTD_CCtx_refCDict(zcs, NULL); // clear the dictionary (if any) + * ZSTD_CCtx_setParameter(zcs, ZSTD_c_compressionLevel, compressionLevel); + * ZSTD_CCtx_setPledgedSrcSize(zcs, pledgedSrcSize); + * + * pledgedSrcSize must be correct. If it is not known at init time, use + * ZSTD_CONTENTSIZE_UNKNOWN. Note that, for compatibility with older programs, + * "0" also disables frame content size field. It may be enabled in the future. + * This prototype will generate compilation warnings. + */ +ZSTD_DEPRECATED("use ZSTD_CCtx_reset, see zstd.h for detailed instructions") +ZSTDLIB_STATIC_API +size_t ZSTD_initCStream_srcSize(ZSTD_CStream* zcs, + int compressionLevel, + unsigned long long pledgedSrcSize); + +/*! ZSTD_initCStream_usingDict() : + * This function is DEPRECATED, and is equivalent to: + * ZSTD_CCtx_reset(zcs, ZSTD_reset_session_only); + * ZSTD_CCtx_setParameter(zcs, ZSTD_c_compressionLevel, compressionLevel); + * ZSTD_CCtx_loadDictionary(zcs, dict, dictSize); + * + * Creates of an internal CDict (incompatible with static CCtx), except if + * dict == NULL or dictSize < 8, in which case no dict is used. + * Note: dict is loaded with ZSTD_dct_auto (treated as a full zstd dictionary if + * it begins with ZSTD_MAGIC_DICTIONARY, else as raw content) and ZSTD_dlm_byCopy. + * This prototype will generate compilation warnings. + */ +ZSTD_DEPRECATED("use ZSTD_CCtx_reset, see zstd.h for detailed instructions") +ZSTDLIB_STATIC_API +size_t ZSTD_initCStream_usingDict(ZSTD_CStream* zcs, + const void* dict, size_t dictSize, + int compressionLevel); + +/*! ZSTD_initCStream_advanced() : + * This function is DEPRECATED, and is equivalent to: + * ZSTD_CCtx_reset(zcs, ZSTD_reset_session_only); + * ZSTD_CCtx_setParams(zcs, params); + * ZSTD_CCtx_setPledgedSrcSize(zcs, pledgedSrcSize); + * ZSTD_CCtx_loadDictionary(zcs, dict, dictSize); + * + * dict is loaded with ZSTD_dct_auto and ZSTD_dlm_byCopy. + * pledgedSrcSize must be correct. + * If srcSize is not known at init time, use value ZSTD_CONTENTSIZE_UNKNOWN. + * This prototype will generate compilation warnings. + */ +ZSTD_DEPRECATED("use ZSTD_CCtx_reset, see zstd.h for detailed instructions") +ZSTDLIB_STATIC_API +size_t ZSTD_initCStream_advanced(ZSTD_CStream* zcs, + const void* dict, size_t dictSize, + ZSTD_parameters params, + unsigned long long pledgedSrcSize); + +/*! ZSTD_initCStream_usingCDict() : + * This function is DEPRECATED, and equivalent to: + * ZSTD_CCtx_reset(zcs, ZSTD_reset_session_only); + * ZSTD_CCtx_refCDict(zcs, cdict); + * + * note : cdict will just be referenced, and must outlive compression session + * This prototype will generate compilation warnings. + */ +ZSTD_DEPRECATED("use ZSTD_CCtx_reset and ZSTD_CCtx_refCDict, see zstd.h for detailed instructions") +ZSTDLIB_STATIC_API +size_t ZSTD_initCStream_usingCDict(ZSTD_CStream* zcs, const ZSTD_CDict* cdict); + +/*! ZSTD_initCStream_usingCDict_advanced() : + * This function is DEPRECATED, and is equivalent to: + * ZSTD_CCtx_reset(zcs, ZSTD_reset_session_only); + * ZSTD_CCtx_setFParams(zcs, fParams); + * ZSTD_CCtx_setPledgedSrcSize(zcs, pledgedSrcSize); + * ZSTD_CCtx_refCDict(zcs, cdict); + * + * same as ZSTD_initCStream_usingCDict(), with control over frame parameters. + * pledgedSrcSize must be correct. If srcSize is not known at init time, use + * value ZSTD_CONTENTSIZE_UNKNOWN. + * This prototype will generate compilation warnings. + */ +ZSTD_DEPRECATED("use ZSTD_CCtx_reset and ZSTD_CCtx_refCDict, see zstd.h for detailed instructions") +ZSTDLIB_STATIC_API +size_t ZSTD_initCStream_usingCDict_advanced(ZSTD_CStream* zcs, + const ZSTD_CDict* cdict, + ZSTD_frameParameters fParams, + unsigned long long pledgedSrcSize); + +/*! ZSTD_resetCStream() : + * This function is DEPRECATED, and is equivalent to: + * ZSTD_CCtx_reset(zcs, ZSTD_reset_session_only); + * ZSTD_CCtx_setPledgedSrcSize(zcs, pledgedSrcSize); + * Note: ZSTD_resetCStream() interprets pledgedSrcSize == 0 as ZSTD_CONTENTSIZE_UNKNOWN, but + * ZSTD_CCtx_setPledgedSrcSize() does not do the same, so ZSTD_CONTENTSIZE_UNKNOWN must be + * explicitly specified. + * + * start a new frame, using same parameters from previous frame. + * This is typically useful to skip dictionary loading stage, since it will reuse it in-place. + * Note that zcs must be init at least once before using ZSTD_resetCStream(). + * If pledgedSrcSize is not known at reset time, use macro ZSTD_CONTENTSIZE_UNKNOWN. + * If pledgedSrcSize > 0, its value must be correct, as it will be written in header, and controlled at the end. + * For the time being, pledgedSrcSize==0 is interpreted as "srcSize unknown" for compatibility with older programs, + * but it will change to mean "empty" in future version, so use macro ZSTD_CONTENTSIZE_UNKNOWN instead. + * @return : 0, or an error code (which can be tested using ZSTD_isError()) + * This prototype will generate compilation warnings. + */ +ZSTD_DEPRECATED("use ZSTD_CCtx_reset, see zstd.h for detailed instructions") +ZSTDLIB_STATIC_API +size_t ZSTD_resetCStream(ZSTD_CStream* zcs, unsigned long long pledgedSrcSize); + + +typedef struct { + unsigned long long ingested; /* nb input bytes read and buffered */ + unsigned long long consumed; /* nb input bytes actually compressed */ + unsigned long long produced; /* nb of compressed bytes generated and buffered */ + unsigned long long flushed; /* nb of compressed bytes flushed : not provided; can be tracked from caller side */ + unsigned currentJobID; /* MT only : latest started job nb */ + unsigned nbActiveWorkers; /* MT only : nb of workers actively compressing at probe time */ +} ZSTD_frameProgression; + +/* ZSTD_getFrameProgression() : + * tells how much data has been ingested (read from input) + * consumed (input actually compressed) and produced (output) for current frame. + * Note : (ingested - consumed) is amount of input data buffered internally, not yet compressed. + * Aggregates progression inside active worker threads. + */ +ZSTDLIB_STATIC_API ZSTD_frameProgression ZSTD_getFrameProgression(const ZSTD_CCtx* cctx); + +/*! ZSTD_toFlushNow() : + * Tell how many bytes are ready to be flushed immediately. + * Useful for multithreading scenarios (nbWorkers >= 1). + * Probe the oldest active job, defined as oldest job not yet entirely flushed, + * and check its output buffer. + * @return : amount of data stored in oldest job and ready to be flushed immediately. + * if @return == 0, it means either : + * + there is no active job (could be checked with ZSTD_frameProgression()), or + * + oldest job is still actively compressing data, + * but everything it has produced has also been flushed so far, + * therefore flush speed is limited by production speed of oldest job + * irrespective of the speed of concurrent (and newer) jobs. + */ +ZSTDLIB_STATIC_API size_t ZSTD_toFlushNow(ZSTD_CCtx* cctx); + + +/*===== Advanced Streaming decompression functions =====*/ + +/*! + * This function is deprecated, and is equivalent to: + * + * ZSTD_DCtx_reset(zds, ZSTD_reset_session_only); + * ZSTD_DCtx_loadDictionary(zds, dict, dictSize); + * + * note: no dictionary will be used if dict == NULL or dictSize < 8 + */ +ZSTD_DEPRECATED("use ZSTD_DCtx_reset + ZSTD_DCtx_loadDictionary, see zstd.h for detailed instructions") +ZSTDLIB_STATIC_API size_t ZSTD_initDStream_usingDict(ZSTD_DStream* zds, const void* dict, size_t dictSize); + +/*! + * This function is deprecated, and is equivalent to: + * + * ZSTD_DCtx_reset(zds, ZSTD_reset_session_only); + * ZSTD_DCtx_refDDict(zds, ddict); + * + * note : ddict is referenced, it must outlive decompression session + */ +ZSTD_DEPRECATED("use ZSTD_DCtx_reset + ZSTD_DCtx_refDDict, see zstd.h for detailed instructions") +ZSTDLIB_STATIC_API size_t ZSTD_initDStream_usingDDict(ZSTD_DStream* zds, const ZSTD_DDict* ddict); + +/*! + * This function is deprecated, and is equivalent to: + * + * ZSTD_DCtx_reset(zds, ZSTD_reset_session_only); + * + * reuse decompression parameters from previous init; saves dictionary loading + */ +ZSTD_DEPRECATED("use ZSTD_DCtx_reset, see zstd.h for detailed instructions") +ZSTDLIB_STATIC_API size_t ZSTD_resetDStream(ZSTD_DStream* zds); + + +/* ********************* BLOCK-LEVEL SEQUENCE PRODUCER API ********************* + * + * *** OVERVIEW *** + * The Block-Level Sequence Producer API allows users to provide their own custom + * sequence producer which libzstd invokes to process each block. The produced list + * of sequences (literals and matches) is then post-processed by libzstd to produce + * valid compressed blocks. + * + * This block-level offload API is a more granular complement of the existing + * frame-level offload API compressSequences() (introduced in v1.5.1). It offers + * an easier migration story for applications already integrated with libzstd: the + * user application continues to invoke the same compression functions + * ZSTD_compress2() or ZSTD_compressStream2() as usual, and transparently benefits + * from the specific advantages of the external sequence producer. For example, + * the sequence producer could be tuned to take advantage of known characteristics + * of the input, to offer better speed / ratio, or could leverage hardware + * acceleration not available within libzstd itself. + * + * See contrib/externalSequenceProducer for an example program employing the + * Block-Level Sequence Producer API. + * + * *** USAGE *** + * The user is responsible for implementing a function of type + * ZSTD_sequenceProducer_F. For each block, zstd will pass the following + * arguments to the user-provided function: + * + * - sequenceProducerState: a pointer to a user-managed state for the sequence + * producer. + * + * - outSeqs, outSeqsCapacity: an output buffer for the sequence producer. + * outSeqsCapacity is guaranteed >= ZSTD_sequenceBound(srcSize). The memory + * backing outSeqs is managed by the CCtx. + * + * - src, srcSize: an input buffer for the sequence producer to parse. + * srcSize is guaranteed to be <= ZSTD_BLOCKSIZE_MAX. + * + * - dict, dictSize: a history buffer, which may be empty, which the sequence + * producer may reference as it parses the src buffer. Currently, zstd will + * always pass dictSize == 0 into external sequence producers, but this will + * change in the future. + * + * - compressionLevel: a signed integer representing the zstd compression level + * set by the user for the current operation. The sequence producer may choose + * to use this information to change its compression strategy and speed/ratio + * tradeoff. Note: the compression level does not reflect zstd parameters set + * through the advanced API. + * + * - windowSize: a size_t representing the maximum allowed offset for external + * sequences. Note that sequence offsets are sometimes allowed to exceed the + * windowSize if a dictionary is present, see doc/zstd_compression_format.md + * for details. + * + * The user-provided function shall return a size_t representing the number of + * sequences written to outSeqs. This return value will be treated as an error + * code if it is greater than outSeqsCapacity. The return value must be non-zero + * if srcSize is non-zero. The ZSTD_SEQUENCE_PRODUCER_ERROR macro is provided + * for convenience, but any value greater than outSeqsCapacity will be treated as + * an error code. + * + * If the user-provided function does not return an error code, the sequences + * written to outSeqs must be a valid parse of the src buffer. Data corruption may + * occur if the parse is not valid. A parse is defined to be valid if the + * following conditions hold: + * - The sum of matchLengths and literalLengths must equal srcSize. + * - All sequences in the parse, except for the final sequence, must have + * matchLength >= ZSTD_MINMATCH_MIN. The final sequence must have + * matchLength >= ZSTD_MINMATCH_MIN or matchLength == 0. + * - All offsets must respect the windowSize parameter as specified in + * doc/zstd_compression_format.md. + * - If the final sequence has matchLength == 0, it must also have offset == 0. + * + * zstd will only validate these conditions (and fail compression if they do not + * hold) if the ZSTD_c_validateSequences cParam is enabled. Note that sequence + * validation has a performance cost. + * + * If the user-provided function returns an error, zstd will either fall back + * to an internal sequence producer or fail the compression operation. The user can + * choose between the two behaviors by setting the ZSTD_c_enableSeqProducerFallback + * cParam. Fallback compression will follow any other cParam settings, such as + * compression level, the same as in a normal compression operation. + * + * The user shall instruct zstd to use a particular ZSTD_sequenceProducer_F + * function by calling + * ZSTD_registerSequenceProducer(cctx, + * sequenceProducerState, + * sequenceProducer) + * This setting will persist until the next parameter reset of the CCtx. + * + * The sequenceProducerState must be initialized by the user before calling + * ZSTD_registerSequenceProducer(). The user is responsible for destroying the + * sequenceProducerState. + * + * *** LIMITATIONS *** + * This API is compatible with all zstd compression APIs which respect advanced parameters. + * However, there are three limitations: + * + * First, the ZSTD_c_enableLongDistanceMatching cParam is not currently supported. + * COMPRESSION WILL FAIL if it is enabled and the user tries to compress with a block-level + * external sequence producer. + * - Note that ZSTD_c_enableLongDistanceMatching is auto-enabled by default in some + * cases (see its documentation for details). Users must explicitly set + * ZSTD_c_enableLongDistanceMatching to ZSTD_ps_disable in such cases if an external + * sequence producer is registered. + * - As of this writing, ZSTD_c_enableLongDistanceMatching is disabled by default + * whenever ZSTD_c_windowLog < 128MB, but that's subject to change. Users should + * check the docs on ZSTD_c_enableLongDistanceMatching whenever the Block-Level Sequence + * Producer API is used in conjunction with advanced settings (like ZSTD_c_windowLog). + * + * Second, history buffers are not currently supported. Concretely, zstd will always pass + * dictSize == 0 to the external sequence producer (for now). This has two implications: + * - Dictionaries are not currently supported. Compression will *not* fail if the user + * references a dictionary, but the dictionary won't have any effect. + * - Stream history is not currently supported. All advanced compression APIs, including + * streaming APIs, work with external sequence producers, but each block is treated as + * an independent chunk without history from previous blocks. + * + * Third, multi-threading within a single compression is not currently supported. In other words, + * COMPRESSION WILL FAIL if ZSTD_c_nbWorkers > 0 and an external sequence producer is registered. + * Multi-threading across compressions is fine: simply create one CCtx per thread. + * + * Long-term, we plan to overcome all three limitations. There is no technical blocker to + * overcoming them. It is purely a question of engineering effort. + */ + +#define ZSTD_SEQUENCE_PRODUCER_ERROR ((size_t)(-1)) + +typedef size_t (*ZSTD_sequenceProducer_F) ( + void* sequenceProducerState, + ZSTD_Sequence* outSeqs, size_t outSeqsCapacity, + const void* src, size_t srcSize, + const void* dict, size_t dictSize, + int compressionLevel, + size_t windowSize +); + +/*! ZSTD_registerSequenceProducer() : + * Instruct zstd to use a block-level external sequence producer function. + * + * The sequenceProducerState must be initialized by the caller, and the caller is + * responsible for managing its lifetime. This parameter is sticky across + * compressions. It will remain set until the user explicitly resets compression + * parameters. + * + * Sequence producer registration is considered to be an "advanced parameter", + * part of the "advanced API". This means it will only have an effect on compression + * APIs which respect advanced parameters, such as compress2() and compressStream2(). + * Older compression APIs such as compressCCtx(), which predate the introduction of + * "advanced parameters", will ignore any external sequence producer setting. + * + * The sequence producer can be "cleared" by registering a NULL function pointer. This + * removes all limitations described above in the "LIMITATIONS" section of the API docs. + * + * The user is strongly encouraged to read the full API documentation (above) before + * calling this function. */ +ZSTDLIB_STATIC_API void +ZSTD_registerSequenceProducer( + ZSTD_CCtx* cctx, + void* sequenceProducerState, + ZSTD_sequenceProducer_F sequenceProducer +); + +/*! ZSTD_CCtxParams_registerSequenceProducer() : + * Same as ZSTD_registerSequenceProducer(), but operates on ZSTD_CCtx_params. + * This is used for accurate size estimation with ZSTD_estimateCCtxSize_usingCCtxParams(), + * which is needed when creating a ZSTD_CCtx with ZSTD_initStaticCCtx(). + * + * If you are using the external sequence producer API in a scenario where ZSTD_initStaticCCtx() + * is required, then this function is for you. Otherwise, you probably don't need it. + * + * See tests/zstreamtest.c for example usage. */ +ZSTDLIB_STATIC_API void +ZSTD_CCtxParams_registerSequenceProducer( + ZSTD_CCtx_params* params, + void* sequenceProducerState, + ZSTD_sequenceProducer_F sequenceProducer +); + + +/********************************************************************* +* Buffer-less and synchronous inner streaming functions (DEPRECATED) +* +* This API is deprecated, and will be removed in a future version. +* It allows streaming (de)compression with user allocated buffers. +* However, it is hard to use, and not as well tested as the rest of +* our API. +* +* Please use the normal streaming API instead: ZSTD_compressStream2, +* and ZSTD_decompressStream. +* If there is functionality that you need, but it doesn't provide, +* please open an issue on our GitHub. +********************************************************************* */ + +/** + Buffer-less streaming compression (synchronous mode) + + A ZSTD_CCtx object is required to track streaming operations. + Use ZSTD_createCCtx() / ZSTD_freeCCtx() to manage resource. + ZSTD_CCtx object can be reused multiple times within successive compression operations. + + Start by initializing a context. + Use ZSTD_compressBegin(), or ZSTD_compressBegin_usingDict() for dictionary compression. + + Then, consume your input using ZSTD_compressContinue(). + There are some important considerations to keep in mind when using this advanced function : + - ZSTD_compressContinue() has no internal buffer. It uses externally provided buffers only. + - Interface is synchronous : input is consumed entirely and produces 1+ compressed blocks. + - Caller must ensure there is enough space in `dst` to store compressed data under worst case scenario. + Worst case evaluation is provided by ZSTD_compressBound(). + ZSTD_compressContinue() doesn't guarantee recover after a failed compression. + - ZSTD_compressContinue() presumes prior input ***is still accessible and unmodified*** (up to maximum distance size, see WindowLog). + It remembers all previous contiguous blocks, plus one separated memory segment (which can itself consists of multiple contiguous blocks) + - ZSTD_compressContinue() detects that prior input has been overwritten when `src` buffer overlaps. + In which case, it will "discard" the relevant memory section from its history. + + Finish a frame with ZSTD_compressEnd(), which will write the last block(s) and optional checksum. + It's possible to use srcSize==0, in which case, it will write a final empty block to end the frame. + Without last block mark, frames are considered unfinished (hence corrupted) by compliant decoders. + + `ZSTD_CCtx` object can be reused (ZSTD_compressBegin()) to compress again. +*/ + +/*===== Buffer-less streaming compression functions =====*/ +ZSTD_DEPRECATED("The buffer-less API is deprecated in favor of the normal streaming API. See docs.") +ZSTDLIB_STATIC_API size_t ZSTD_compressBegin(ZSTD_CCtx* cctx, int compressionLevel); +ZSTD_DEPRECATED("The buffer-less API is deprecated in favor of the normal streaming API. See docs.") +ZSTDLIB_STATIC_API size_t ZSTD_compressBegin_usingDict(ZSTD_CCtx* cctx, const void* dict, size_t dictSize, int compressionLevel); +ZSTD_DEPRECATED("The buffer-less API is deprecated in favor of the normal streaming API. See docs.") +ZSTDLIB_STATIC_API size_t ZSTD_compressBegin_usingCDict(ZSTD_CCtx* cctx, const ZSTD_CDict* cdict); /**< note: fails if cdict==NULL */ + +ZSTD_DEPRECATED("This function will likely be removed in a future release. It is misleading and has very limited utility.") +ZSTDLIB_STATIC_API +size_t ZSTD_copyCCtx(ZSTD_CCtx* cctx, const ZSTD_CCtx* preparedCCtx, unsigned long long pledgedSrcSize); /**< note: if pledgedSrcSize is not known, use ZSTD_CONTENTSIZE_UNKNOWN */ + +ZSTD_DEPRECATED("The buffer-less API is deprecated in favor of the normal streaming API. See docs.") +ZSTDLIB_STATIC_API size_t ZSTD_compressContinue(ZSTD_CCtx* cctx, void* dst, size_t dstCapacity, const void* src, size_t srcSize); +ZSTD_DEPRECATED("The buffer-less API is deprecated in favor of the normal streaming API. See docs.") +ZSTDLIB_STATIC_API size_t ZSTD_compressEnd(ZSTD_CCtx* cctx, void* dst, size_t dstCapacity, const void* src, size_t srcSize); + +/* The ZSTD_compressBegin_advanced() and ZSTD_compressBegin_usingCDict_advanced() are now DEPRECATED and will generate a compiler warning */ +ZSTD_DEPRECATED("use advanced API to access custom parameters") +ZSTDLIB_STATIC_API +size_t ZSTD_compressBegin_advanced(ZSTD_CCtx* cctx, const void* dict, size_t dictSize, ZSTD_parameters params, unsigned long long pledgedSrcSize); /**< pledgedSrcSize : If srcSize is not known at init time, use ZSTD_CONTENTSIZE_UNKNOWN */ +ZSTD_DEPRECATED("use advanced API to access custom parameters") +ZSTDLIB_STATIC_API +size_t ZSTD_compressBegin_usingCDict_advanced(ZSTD_CCtx* const cctx, const ZSTD_CDict* const cdict, ZSTD_frameParameters const fParams, unsigned long long const pledgedSrcSize); /* compression parameters are already set within cdict. pledgedSrcSize must be correct. If srcSize is not known, use macro ZSTD_CONTENTSIZE_UNKNOWN */ +/** + Buffer-less streaming decompression (synchronous mode) + + A ZSTD_DCtx object is required to track streaming operations. + Use ZSTD_createDCtx() / ZSTD_freeDCtx() to manage it. + A ZSTD_DCtx object can be reused multiple times. + + First typical operation is to retrieve frame parameters, using ZSTD_getFrameHeader(). + Frame header is extracted from the beginning of compressed frame, so providing only the frame's beginning is enough. + Data fragment must be large enough to ensure successful decoding. + `ZSTD_frameHeaderSize_max` bytes is guaranteed to always be large enough. + result : 0 : successful decoding, the `ZSTD_frameHeader` structure is correctly filled. + >0 : `srcSize` is too small, please provide at least result bytes on next attempt. + errorCode, which can be tested using ZSTD_isError(). + + It fills a ZSTD_FrameHeader structure with important information to correctly decode the frame, + such as the dictionary ID, content size, or maximum back-reference distance (`windowSize`). + Note that these values could be wrong, either because of data corruption, or because a 3rd party deliberately spoofs false information. + As a consequence, check that values remain within valid application range. + For example, do not allocate memory blindly, check that `windowSize` is within expectation. + Each application can set its own limits, depending on local restrictions. + For extended interoperability, it is recommended to support `windowSize` of at least 8 MB. + + ZSTD_decompressContinue() needs previous data blocks during decompression, up to `windowSize` bytes. + ZSTD_decompressContinue() is very sensitive to contiguity, + if 2 blocks don't follow each other, make sure that either the compressor breaks contiguity at the same place, + or that previous contiguous segment is large enough to properly handle maximum back-reference distance. + There are multiple ways to guarantee this condition. + + The most memory efficient way is to use a round buffer of sufficient size. + Sufficient size is determined by invoking ZSTD_decodingBufferSize_min(), + which can return an error code if required value is too large for current system (in 32-bits mode). + In a round buffer methodology, ZSTD_decompressContinue() decompresses each block next to previous one, + up to the moment there is not enough room left in the buffer to guarantee decoding another full block, + which maximum size is provided in `ZSTD_frameHeader` structure, field `blockSizeMax`. + At which point, decoding can resume from the beginning of the buffer. + Note that already decoded data stored in the buffer should be flushed before being overwritten. + + There are alternatives possible, for example using two or more buffers of size `windowSize` each, though they consume more memory. + + Finally, if you control the compression process, you can also ignore all buffer size rules, + as long as the encoder and decoder progress in "lock-step", + aka use exactly the same buffer sizes, break contiguity at the same place, etc. + + Once buffers are setup, start decompression, with ZSTD_decompressBegin(). + If decompression requires a dictionary, use ZSTD_decompressBegin_usingDict() or ZSTD_decompressBegin_usingDDict(). + + Then use ZSTD_nextSrcSizeToDecompress() and ZSTD_decompressContinue() alternatively. + ZSTD_nextSrcSizeToDecompress() tells how many bytes to provide as 'srcSize' to ZSTD_decompressContinue(). + ZSTD_decompressContinue() requires this _exact_ amount of bytes, or it will fail. + + result of ZSTD_decompressContinue() is the number of bytes regenerated within 'dst' (necessarily <= dstCapacity). + It can be zero : it just means ZSTD_decompressContinue() has decoded some metadata item. + It can also be an error code, which can be tested with ZSTD_isError(). + + A frame is fully decoded when ZSTD_nextSrcSizeToDecompress() returns zero. + Context can then be reset to start a new decompression. + + Note : it's possible to know if next input to present is a header or a block, using ZSTD_nextInputType(). + This information is not required to properly decode a frame. + + == Special case : skippable frames == + + Skippable frames allow integration of user-defined data into a flow of concatenated frames. + Skippable frames will be ignored (skipped) by decompressor. + The format of skippable frames is as follows : + a) Skippable frame ID - 4 Bytes, Little endian format, any value from 0x184D2A50 to 0x184D2A5F + b) Frame Size - 4 Bytes, Little endian format, unsigned 32-bits + c) Frame Content - any content (User Data) of length equal to Frame Size + For skippable frames ZSTD_getFrameHeader() returns zfhPtr->frameType==ZSTD_skippableFrame. + For skippable frames ZSTD_decompressContinue() always returns 0 : it only skips the content. +*/ + +/*===== Buffer-less streaming decompression functions =====*/ + +ZSTDLIB_STATIC_API size_t ZSTD_decodingBufferSize_min(unsigned long long windowSize, unsigned long long frameContentSize); /**< when frame content size is not known, pass in frameContentSize == ZSTD_CONTENTSIZE_UNKNOWN */ + +ZSTDLIB_STATIC_API size_t ZSTD_decompressBegin(ZSTD_DCtx* dctx); +ZSTDLIB_STATIC_API size_t ZSTD_decompressBegin_usingDict(ZSTD_DCtx* dctx, const void* dict, size_t dictSize); +ZSTDLIB_STATIC_API size_t ZSTD_decompressBegin_usingDDict(ZSTD_DCtx* dctx, const ZSTD_DDict* ddict); + +ZSTDLIB_STATIC_API size_t ZSTD_nextSrcSizeToDecompress(ZSTD_DCtx* dctx); +ZSTDLIB_STATIC_API size_t ZSTD_decompressContinue(ZSTD_DCtx* dctx, void* dst, size_t dstCapacity, const void* src, size_t srcSize); + +/* misc */ +ZSTD_DEPRECATED("This function will likely be removed in the next minor release. It is misleading and has very limited utility.") +ZSTDLIB_STATIC_API void ZSTD_copyDCtx(ZSTD_DCtx* dctx, const ZSTD_DCtx* preparedDCtx); +typedef enum { ZSTDnit_frameHeader, ZSTDnit_blockHeader, ZSTDnit_block, ZSTDnit_lastBlock, ZSTDnit_checksum, ZSTDnit_skippableFrame } ZSTD_nextInputType_e; +ZSTDLIB_STATIC_API ZSTD_nextInputType_e ZSTD_nextInputType(ZSTD_DCtx* dctx); + + + +/*! ZSTD_isDeterministicBuild() : + * Returns 1 if the library is built using standard compilation flags, + * and participates in determinism guarantees with other builds of the + * same version. + * If this function returns 0, it means the library was compiled with + * non-standard compilation flags that change the output of the + * compressor. + * This is mainly used for Zstd's determinism test suite, which is only + * run when this function returns 1. + */ +ZSTDLIB_API int ZSTD_isDeterministicBuild(void); + + +/* ========================================= */ +/** Block level API (DEPRECATED) */ +/* ========================================= */ + +/*! + + This API is deprecated in favor of the regular compression API. + You can get the frame header down to 2 bytes by setting: + - ZSTD_c_format = ZSTD_f_zstd1_magicless + - ZSTD_c_contentSizeFlag = 0 + - ZSTD_c_checksumFlag = 0 + - ZSTD_c_dictIDFlag = 0 + + This API is not as well tested as our normal API, so we recommend not using it. + We will be removing it in a future version. If the normal API doesn't provide + the functionality you need, please open a GitHub issue. + + Block functions produce and decode raw zstd blocks, without frame metadata. + Frame metadata cost is typically ~12 bytes, which can be non-negligible for very small blocks (< 100 bytes). + But users will have to take in charge needed metadata to regenerate data, such as compressed and content sizes. + + A few rules to respect : + - Compressing and decompressing require a context structure + + Use ZSTD_createCCtx() and ZSTD_createDCtx() + - It is necessary to init context before starting + + compression : any ZSTD_compressBegin*() variant, including with dictionary + + decompression : any ZSTD_decompressBegin*() variant, including with dictionary + - Block size is limited, it must be <= ZSTD_getBlockSize() <= ZSTD_BLOCKSIZE_MAX == 128 KB + + If input is larger than a block size, it's necessary to split input data into multiple blocks + + For inputs larger than a single block, consider using regular ZSTD_compress() instead. + Frame metadata is not that costly, and quickly becomes negligible as source size grows larger than a block. + - When a block is considered not compressible enough, ZSTD_compressBlock() result will be 0 (zero) ! + ===> In which case, nothing is produced into `dst` ! + + User __must__ test for such outcome and deal directly with uncompressed data + + A block cannot be declared incompressible if ZSTD_compressBlock() return value was != 0. + Doing so would mess up with statistics history, leading to potential data corruption. + + ZSTD_decompressBlock() _doesn't accept uncompressed data as input_ !! + + In case of multiple successive blocks, should some of them be uncompressed, + decoder must be informed of their existence in order to follow proper history. + Use ZSTD_insertBlock() for such a case. +*/ + +/*===== Raw zstd block functions =====*/ +ZSTD_DEPRECATED("The block API is deprecated in favor of the normal compression API. See docs.") +ZSTDLIB_STATIC_API size_t ZSTD_getBlockSize (const ZSTD_CCtx* cctx); +ZSTD_DEPRECATED("The block API is deprecated in favor of the normal compression API. See docs.") +ZSTDLIB_STATIC_API size_t ZSTD_compressBlock (ZSTD_CCtx* cctx, void* dst, size_t dstCapacity, const void* src, size_t srcSize); +ZSTD_DEPRECATED("The block API is deprecated in favor of the normal compression API. See docs.") +ZSTDLIB_STATIC_API size_t ZSTD_decompressBlock(ZSTD_DCtx* dctx, void* dst, size_t dstCapacity, const void* src, size_t srcSize); +ZSTD_DEPRECATED("The block API is deprecated in favor of the normal compression API. See docs.") +ZSTDLIB_STATIC_API size_t ZSTD_insertBlock (ZSTD_DCtx* dctx, const void* blockStart, size_t blockSize); /**< insert uncompressed block into `dctx` history. Useful for multi-blocks decompression. */ + +#if defined (__cplusplus) +} +#endif + +#endif /* ZSTD_H_ZSTD_STATIC_LINKING_ONLY */ diff --git a/dependencies/linux64/include/zstd_errors.h b/dependencies/linux64/include/zstd_errors.h new file mode 100644 index 0000000..8ebc95c --- /dev/null +++ b/dependencies/linux64/include/zstd_errors.h @@ -0,0 +1,107 @@ +/* + * Copyright (c) Meta Platforms, Inc. and affiliates. + * All rights reserved. + * + * This source code is licensed under both the BSD-style license (found in the + * LICENSE file in the root directory of this source tree) and the GPLv2 (found + * in the COPYING file in the root directory of this source tree). + * You may select, at your option, one of the above-listed licenses. + */ + +#ifndef ZSTD_ERRORS_H_398273423 +#define ZSTD_ERRORS_H_398273423 + +#if defined (__cplusplus) +extern "C" { +#endif + +/* ===== ZSTDERRORLIB_API : control library symbols visibility ===== */ +#ifndef ZSTDERRORLIB_VISIBLE + /* Backwards compatibility with old macro name */ +# ifdef ZSTDERRORLIB_VISIBILITY +# define ZSTDERRORLIB_VISIBLE ZSTDERRORLIB_VISIBILITY +# elif defined(__GNUC__) && (__GNUC__ >= 4) && !defined(__MINGW32__) +# define ZSTDERRORLIB_VISIBLE __attribute__ ((visibility ("default"))) +# else +# define ZSTDERRORLIB_VISIBLE +# endif +#endif + +#ifndef ZSTDERRORLIB_HIDDEN +# if defined(__GNUC__) && (__GNUC__ >= 4) && !defined(__MINGW32__) +# define ZSTDERRORLIB_HIDDEN __attribute__ ((visibility ("hidden"))) +# else +# define ZSTDERRORLIB_HIDDEN +# endif +#endif + +#if defined(ZSTD_DLL_EXPORT) && (ZSTD_DLL_EXPORT==1) +# define ZSTDERRORLIB_API __declspec(dllexport) ZSTDERRORLIB_VISIBLE +#elif defined(ZSTD_DLL_IMPORT) && (ZSTD_DLL_IMPORT==1) +# define ZSTDERRORLIB_API __declspec(dllimport) ZSTDERRORLIB_VISIBLE /* It isn't required but allows to generate better code, saving a function pointer load from the IAT and an indirect jump.*/ +#else +# define ZSTDERRORLIB_API ZSTDERRORLIB_VISIBLE +#endif + +/*-********************************************* + * Error codes list + *-********************************************* + * Error codes _values_ are pinned down since v1.3.1 only. + * Therefore, don't rely on values if you may link to any version < v1.3.1. + * + * Only values < 100 are considered stable. + * + * note 1 : this API shall be used with static linking only. + * dynamic linking is not yet officially supported. + * note 2 : Prefer relying on the enum than on its value whenever possible + * This is the only supported way to use the error list < v1.3.1 + * note 3 : ZSTD_isError() is always correct, whatever the library version. + **********************************************/ +typedef enum { + ZSTD_error_no_error = 0, + ZSTD_error_GENERIC = 1, + ZSTD_error_prefix_unknown = 10, + ZSTD_error_version_unsupported = 12, + ZSTD_error_frameParameter_unsupported = 14, + ZSTD_error_frameParameter_windowTooLarge = 16, + ZSTD_error_corruption_detected = 20, + ZSTD_error_checksum_wrong = 22, + ZSTD_error_literals_headerWrong = 24, + ZSTD_error_dictionary_corrupted = 30, + ZSTD_error_dictionary_wrong = 32, + ZSTD_error_dictionaryCreation_failed = 34, + ZSTD_error_parameter_unsupported = 40, + ZSTD_error_parameter_combination_unsupported = 41, + ZSTD_error_parameter_outOfBound = 42, + ZSTD_error_tableLog_tooLarge = 44, + ZSTD_error_maxSymbolValue_tooLarge = 46, + ZSTD_error_maxSymbolValue_tooSmall = 48, + ZSTD_error_cannotProduce_uncompressedBlock = 49, + ZSTD_error_stabilityCondition_notRespected = 50, + ZSTD_error_stage_wrong = 60, + ZSTD_error_init_missing = 62, + ZSTD_error_memory_allocation = 64, + ZSTD_error_workSpace_tooSmall= 66, + ZSTD_error_dstSize_tooSmall = 70, + ZSTD_error_srcSize_wrong = 72, + ZSTD_error_dstBuffer_null = 74, + ZSTD_error_noForwardProgress_destFull = 80, + ZSTD_error_noForwardProgress_inputEmpty = 82, + /* following error codes are __NOT STABLE__, they can be removed or changed in future versions */ + ZSTD_error_frameIndex_tooLarge = 100, + ZSTD_error_seekableIO = 102, + ZSTD_error_dstBuffer_wrong = 104, + ZSTD_error_srcBuffer_wrong = 105, + ZSTD_error_sequenceProducer_failed = 106, + ZSTD_error_externalSequences_invalid = 107, + ZSTD_error_maxCode = 120 /* never EVER use this value directly, it can change in future versions! Use ZSTD_isError() instead */ +} ZSTD_ErrorCode; + +ZSTDERRORLIB_API const char* ZSTD_getErrorString(ZSTD_ErrorCode code); /**< Same as ZSTD_getErrorName, but using a `ZSTD_ErrorCode` enum argument */ + + +#if defined (__cplusplus) +} +#endif + +#endif /* ZSTD_ERRORS_H_398273423 */ diff --git a/dependencies/linux64/lib/libbrotlicommon.a b/dependencies/linux64/lib/libbrotlicommon.a new file mode 100644 index 0000000..62972a3 Binary files /dev/null and b/dependencies/linux64/lib/libbrotlicommon.a differ diff --git a/dependencies/linux64/lib/libbrotlidec.a b/dependencies/linux64/lib/libbrotlidec.a new file mode 100644 index 0000000..c7a2eba Binary files /dev/null and b/dependencies/linux64/lib/libbrotlidec.a differ diff --git a/dependencies/linux64/lib/libbrotlienc.a b/dependencies/linux64/lib/libbrotlienc.a new file mode 100644 index 0000000..37b2fa4 Binary files /dev/null and b/dependencies/linux64/lib/libbrotlienc.a differ diff --git a/dependencies/linux64/lib/libbz2.a b/dependencies/linux64/lib/libbz2.a new file mode 100644 index 0000000..8672812 Binary files /dev/null and b/dependencies/linux64/lib/libbz2.a differ diff --git a/dependencies/linux64/lib/libfreetype.a b/dependencies/linux64/lib/libfreetype.a new file mode 100644 index 0000000..b3755b7 Binary files /dev/null and b/dependencies/linux64/lib/libfreetype.a differ diff --git a/dependencies/linux64/lib/libharfbuzz-subset.a b/dependencies/linux64/lib/libharfbuzz-subset.a new file mode 100644 index 0000000..91b378a Binary files /dev/null and b/dependencies/linux64/lib/libharfbuzz-subset.a differ diff --git a/dependencies/linux64/lib/libharfbuzz.a b/dependencies/linux64/lib/libharfbuzz.a new file mode 100644 index 0000000..d2cc042 Binary files /dev/null and b/dependencies/linux64/lib/libharfbuzz.a differ diff --git a/dependencies/linux64/lib/libpng.a b/dependencies/linux64/lib/libpng.a new file mode 120000 index 0000000..5671875 --- /dev/null +++ b/dependencies/linux64/lib/libpng.a @@ -0,0 +1 @@ +libpng16.a \ No newline at end of file diff --git a/dependencies/linux64/lib/libpng16.a b/dependencies/linux64/lib/libpng16.a new file mode 100644 index 0000000..a26ecb5 Binary files /dev/null and b/dependencies/linux64/lib/libpng16.a differ diff --git a/dependencies/linux64/lib/libz.a b/dependencies/linux64/lib/libz.a new file mode 100644 index 0000000..e062372 Binary files /dev/null and b/dependencies/linux64/lib/libz.a differ diff --git a/dependencies/winx64/include/brotli/decode.h b/dependencies/winx64/include/brotli/decode.h new file mode 100644 index 0000000..af1aa23 --- /dev/null +++ b/dependencies/winx64/include/brotli/decode.h @@ -0,0 +1,409 @@ +/* Copyright 2013 Google Inc. All Rights Reserved. + + Distributed under MIT license. + See file LICENSE for detail or copy at https://opensource.org/licenses/MIT +*/ + +/** + * @file + * API for Brotli decompression. + */ + +#ifndef BROTLI_DEC_DECODE_H_ +#define BROTLI_DEC_DECODE_H_ + +#include +#include +#include + +#if defined(__cplusplus) || defined(c_plusplus) +extern "C" { +#endif + +/** + * Opaque structure that holds decoder state. + * + * Allocated and initialized with ::BrotliDecoderCreateInstance. + * Cleaned up and deallocated with ::BrotliDecoderDestroyInstance. + */ +typedef struct BrotliDecoderStateStruct BrotliDecoderState; + +/** + * Result type for ::BrotliDecoderDecompress and + * ::BrotliDecoderDecompressStream functions. + */ +typedef enum { + /** Decoding error, e.g. corrupted input or memory allocation problem. */ + BROTLI_DECODER_RESULT_ERROR = 0, + /** Decoding successfully completed. */ + BROTLI_DECODER_RESULT_SUCCESS = 1, + /** Partially done; should be called again with more input. */ + BROTLI_DECODER_RESULT_NEEDS_MORE_INPUT = 2, + /** Partially done; should be called again with more output. */ + BROTLI_DECODER_RESULT_NEEDS_MORE_OUTPUT = 3 +} BrotliDecoderResult; + +/** + * Template that evaluates items of ::BrotliDecoderErrorCode. + * + * Example: @code {.cpp} + * // Log Brotli error code. + * switch (brotliDecoderErrorCode) { + * #define CASE_(PREFIX, NAME, CODE) \ + * case BROTLI_DECODER ## PREFIX ## NAME: \ + * LOG(INFO) << "error code:" << #NAME; \ + * break; + * #define NEWLINE_ + * BROTLI_DECODER_ERROR_CODES_LIST(CASE_, NEWLINE_) + * #undef CASE_ + * #undef NEWLINE_ + * default: LOG(FATAL) << "unknown brotli error code"; + * } + * @endcode + */ +#define BROTLI_DECODER_ERROR_CODES_LIST(BROTLI_ERROR_CODE, SEPARATOR) \ + BROTLI_ERROR_CODE(_, NO_ERROR, 0) SEPARATOR \ + /* Same as BrotliDecoderResult values */ \ + BROTLI_ERROR_CODE(_, SUCCESS, 1) SEPARATOR \ + BROTLI_ERROR_CODE(_, NEEDS_MORE_INPUT, 2) SEPARATOR \ + BROTLI_ERROR_CODE(_, NEEDS_MORE_OUTPUT, 3) SEPARATOR \ + \ + /* Errors caused by invalid input */ \ + BROTLI_ERROR_CODE(_ERROR_FORMAT_, EXUBERANT_NIBBLE, -1) SEPARATOR \ + BROTLI_ERROR_CODE(_ERROR_FORMAT_, RESERVED, -2) SEPARATOR \ + BROTLI_ERROR_CODE(_ERROR_FORMAT_, EXUBERANT_META_NIBBLE, -3) SEPARATOR \ + BROTLI_ERROR_CODE(_ERROR_FORMAT_, SIMPLE_HUFFMAN_ALPHABET, -4) SEPARATOR \ + BROTLI_ERROR_CODE(_ERROR_FORMAT_, SIMPLE_HUFFMAN_SAME, -5) SEPARATOR \ + BROTLI_ERROR_CODE(_ERROR_FORMAT_, CL_SPACE, -6) SEPARATOR \ + BROTLI_ERROR_CODE(_ERROR_FORMAT_, HUFFMAN_SPACE, -7) SEPARATOR \ + BROTLI_ERROR_CODE(_ERROR_FORMAT_, CONTEXT_MAP_REPEAT, -8) SEPARATOR \ + BROTLI_ERROR_CODE(_ERROR_FORMAT_, BLOCK_LENGTH_1, -9) SEPARATOR \ + BROTLI_ERROR_CODE(_ERROR_FORMAT_, BLOCK_LENGTH_2, -10) SEPARATOR \ + BROTLI_ERROR_CODE(_ERROR_FORMAT_, TRANSFORM, -11) SEPARATOR \ + BROTLI_ERROR_CODE(_ERROR_FORMAT_, DICTIONARY, -12) SEPARATOR \ + BROTLI_ERROR_CODE(_ERROR_FORMAT_, WINDOW_BITS, -13) SEPARATOR \ + BROTLI_ERROR_CODE(_ERROR_FORMAT_, PADDING_1, -14) SEPARATOR \ + BROTLI_ERROR_CODE(_ERROR_FORMAT_, PADDING_2, -15) SEPARATOR \ + BROTLI_ERROR_CODE(_ERROR_FORMAT_, DISTANCE, -16) SEPARATOR \ + \ + /* -17 code is reserved */ \ + \ + BROTLI_ERROR_CODE(_ERROR_, COMPOUND_DICTIONARY, -18) SEPARATOR \ + BROTLI_ERROR_CODE(_ERROR_, DICTIONARY_NOT_SET, -19) SEPARATOR \ + BROTLI_ERROR_CODE(_ERROR_, INVALID_ARGUMENTS, -20) SEPARATOR \ + \ + /* Memory allocation problems */ \ + BROTLI_ERROR_CODE(_ERROR_ALLOC_, CONTEXT_MODES, -21) SEPARATOR \ + /* Literal, insert and distance trees together */ \ + BROTLI_ERROR_CODE(_ERROR_ALLOC_, TREE_GROUPS, -22) SEPARATOR \ + /* -23..-24 codes are reserved for distinct tree groups */ \ + BROTLI_ERROR_CODE(_ERROR_ALLOC_, CONTEXT_MAP, -25) SEPARATOR \ + BROTLI_ERROR_CODE(_ERROR_ALLOC_, RING_BUFFER_1, -26) SEPARATOR \ + BROTLI_ERROR_CODE(_ERROR_ALLOC_, RING_BUFFER_2, -27) SEPARATOR \ + /* -28..-29 codes are reserved for dynamic ring-buffer allocation */ \ + BROTLI_ERROR_CODE(_ERROR_ALLOC_, BLOCK_TYPE_TREES, -30) SEPARATOR \ + \ + /* "Impossible" states */ \ + BROTLI_ERROR_CODE(_ERROR_, UNREACHABLE, -31) + +/** + * Error code for detailed logging / production debugging. + * + * See ::BrotliDecoderGetErrorCode and ::BROTLI_LAST_ERROR_CODE. + */ +typedef enum { +#define BROTLI_COMMA_ , +#define BROTLI_ERROR_CODE_ENUM_ITEM_(PREFIX, NAME, CODE) \ + BROTLI_DECODER ## PREFIX ## NAME = CODE + BROTLI_DECODER_ERROR_CODES_LIST(BROTLI_ERROR_CODE_ENUM_ITEM_, BROTLI_COMMA_) +} BrotliDecoderErrorCode; +#undef BROTLI_ERROR_CODE_ENUM_ITEM_ +#undef BROTLI_COMMA_ + +/** + * The value of the last error code, negative integer. + * + * All other error code values are in the range from ::BROTLI_LAST_ERROR_CODE + * to @c -1. There are also 4 other possible non-error codes @c 0 .. @c 3 in + * ::BrotliDecoderErrorCode enumeration. + */ +#define BROTLI_LAST_ERROR_CODE BROTLI_DECODER_ERROR_UNREACHABLE + +/** Options to be used with ::BrotliDecoderSetParameter. */ +typedef enum BrotliDecoderParameter { + /** + * Disable "canny" ring buffer allocation strategy. + * + * Ring buffer is allocated according to window size, despite the real size of + * the content. + */ + BROTLI_DECODER_PARAM_DISABLE_RING_BUFFER_REALLOCATION = 0, + /** + * Flag that determines if "Large Window Brotli" is used. + */ + BROTLI_DECODER_PARAM_LARGE_WINDOW = 1 +} BrotliDecoderParameter; + +/** + * Sets the specified parameter to the given decoder instance. + * + * @param state decoder instance + * @param param parameter to set + * @param value new parameter value + * @returns ::BROTLI_FALSE if parameter is unrecognized, or value is invalid + * @returns ::BROTLI_TRUE if value is accepted + */ +BROTLI_DEC_API BROTLI_BOOL BrotliDecoderSetParameter( + BrotliDecoderState* state, BrotliDecoderParameter param, uint32_t value); + +/** + * Adds LZ77 prefix dictionary, adds or replaces built-in static dictionary and + * transforms. + * + * Attached dictionary ownership is not transferred. + * Data provided to this method should be kept accessible until + * decoding is finished and decoder instance is destroyed. + * + * @note Dictionaries can NOT be attached after actual decoding is started. + * + * @param state decoder instance + * @param type dictionary data format + * @param data_size length of memory region pointed by @p data + * @param data dictionary data in format corresponding to @p type + * @returns ::BROTLI_FALSE if dictionary is corrupted, + * or dictionary count limit is reached + * @returns ::BROTLI_TRUE if dictionary is accepted / attached + */ +BROTLI_DEC_API BROTLI_BOOL BrotliDecoderAttachDictionary( + BrotliDecoderState* state, BrotliSharedDictionaryType type, + size_t data_size, const uint8_t data[BROTLI_ARRAY_PARAM(data_size)]); + +/** + * Creates an instance of ::BrotliDecoderState and initializes it. + * + * The instance can be used once for decoding and should then be destroyed with + * ::BrotliDecoderDestroyInstance, it cannot be reused for a new decoding + * session. + * + * @p alloc_func and @p free_func @b MUST be both zero or both non-zero. In the + * case they are both zero, default memory allocators are used. @p opaque is + * passed to @p alloc_func and @p free_func when they are called. @p free_func + * has to return without doing anything when asked to free a NULL pointer. + * + * @param alloc_func custom memory allocation function + * @param free_func custom memory free function + * @param opaque custom memory manager handle + * @returns @c 0 if instance can not be allocated or initialized + * @returns pointer to initialized ::BrotliDecoderState otherwise + */ +BROTLI_DEC_API BrotliDecoderState* BrotliDecoderCreateInstance( + brotli_alloc_func alloc_func, brotli_free_func free_func, void* opaque); + +/** + * Deinitializes and frees ::BrotliDecoderState instance. + * + * @param state decoder instance to be cleaned up and deallocated + */ +BROTLI_DEC_API void BrotliDecoderDestroyInstance(BrotliDecoderState* state); + +/** + * Performs one-shot memory-to-memory decompression. + * + * Decompresses the data in @p encoded_buffer into @p decoded_buffer, and sets + * @p *decoded_size to the decompressed length. + * + * @param encoded_size size of @p encoded_buffer + * @param encoded_buffer compressed data buffer with at least @p encoded_size + * addressable bytes + * @param[in, out] decoded_size @b in: size of @p decoded_buffer; \n + * @b out: length of decompressed data written to + * @p decoded_buffer + * @param decoded_buffer decompressed data destination buffer + * @returns ::BROTLI_DECODER_RESULT_ERROR if input is corrupted, memory + * allocation failed, or @p decoded_buffer is not large enough; + * @returns ::BROTLI_DECODER_RESULT_SUCCESS otherwise + */ +BROTLI_DEC_API BrotliDecoderResult BrotliDecoderDecompress( + size_t encoded_size, + const uint8_t encoded_buffer[BROTLI_ARRAY_PARAM(encoded_size)], + size_t* decoded_size, + uint8_t decoded_buffer[BROTLI_ARRAY_PARAM(*decoded_size)]); + +/** + * Decompresses the input stream to the output stream. + * + * The values @p *available_in and @p *available_out must specify the number of + * bytes addressable at @p *next_in and @p *next_out respectively. + * When @p *available_out is @c 0, @p next_out is allowed to be @c NULL. + * + * After each call, @p *available_in will be decremented by the amount of input + * bytes consumed, and the @p *next_in pointer will be incremented by that + * amount. Similarly, @p *available_out will be decremented by the amount of + * output bytes written, and the @p *next_out pointer will be incremented by + * that amount. + * + * @p total_out, if it is not a null-pointer, will be set to the number + * of bytes decompressed since the last @p state initialization. + * + * @note Input is never overconsumed, so @p next_in and @p available_in could be + * passed to the next consumer after decoding is complete. + * + * @param state decoder instance + * @param[in, out] available_in @b in: amount of available input; \n + * @b out: amount of unused input + * @param[in, out] next_in pointer to the next compressed byte + * @param[in, out] available_out @b in: length of output buffer; \n + * @b out: remaining size of output buffer + * @param[in, out] next_out output buffer cursor; + * can be @c NULL if @p available_out is @c 0 + * @param[out] total_out number of bytes decompressed so far; can be @c NULL + * @returns ::BROTLI_DECODER_RESULT_ERROR if input is corrupted, memory + * allocation failed, arguments were invalid, etc.; + * use ::BrotliDecoderGetErrorCode to get detailed error code + * @returns ::BROTLI_DECODER_RESULT_NEEDS_MORE_INPUT decoding is blocked until + * more input data is provided + * @returns ::BROTLI_DECODER_RESULT_NEEDS_MORE_OUTPUT decoding is blocked until + * more output space is provided + * @returns ::BROTLI_DECODER_RESULT_SUCCESS decoding is finished, no more + * input might be consumed and no more output will be produced + */ +BROTLI_DEC_API BrotliDecoderResult BrotliDecoderDecompressStream( + BrotliDecoderState* state, size_t* available_in, const uint8_t** next_in, + size_t* available_out, uint8_t** next_out, size_t* total_out); + +/** + * Checks if decoder has more output. + * + * @param state decoder instance + * @returns ::BROTLI_TRUE, if decoder has some unconsumed output + * @returns ::BROTLI_FALSE otherwise + */ +BROTLI_DEC_API BROTLI_BOOL BrotliDecoderHasMoreOutput( + const BrotliDecoderState* state); + +/** + * Acquires pointer to internal output buffer. + * + * This method is used to make language bindings easier and more efficient: + * -# push data to ::BrotliDecoderDecompressStream, + * until ::BROTLI_DECODER_RESULT_NEEDS_MORE_OUTPUT is reported + * -# use ::BrotliDecoderTakeOutput to peek bytes and copy to language-specific + * entity + * + * Also this could be useful if there is an output stream that is able to + * consume all the provided data (e.g. when data is saved to file system). + * + * @attention After every call to ::BrotliDecoderTakeOutput @p *size bytes of + * output are considered consumed for all consecutive calls to the + * instance methods; returned pointer becomes invalidated as well. + * + * @note Decoder output is not guaranteed to be contiguous. This means that + * after the size-unrestricted call to ::BrotliDecoderTakeOutput, + * immediate next call to ::BrotliDecoderTakeOutput may return more data. + * + * @param state decoder instance + * @param[in, out] size @b in: number of bytes caller is ready to take, @c 0 if + * any amount could be handled; \n + * @b out: amount of data pointed by returned pointer and + * considered consumed; \n + * out value is never greater than in value, unless it is @c 0 + * @returns pointer to output data + */ +BROTLI_DEC_API const uint8_t* BrotliDecoderTakeOutput( + BrotliDecoderState* state, size_t* size); + +/** + * Checks if instance has already consumed input. + * + * Instance that returns ::BROTLI_FALSE is considered "fresh" and could be + * reused. + * + * @param state decoder instance + * @returns ::BROTLI_TRUE if decoder has already used some input bytes + * @returns ::BROTLI_FALSE otherwise + */ +BROTLI_DEC_API BROTLI_BOOL BrotliDecoderIsUsed(const BrotliDecoderState* state); + +/** + * Checks if decoder instance reached the final state. + * + * @param state decoder instance + * @returns ::BROTLI_TRUE if decoder is in a state where it reached the end of + * the input and produced all of the output + * @returns ::BROTLI_FALSE otherwise + */ +BROTLI_DEC_API BROTLI_BOOL BrotliDecoderIsFinished( + const BrotliDecoderState* state); + +/** + * Acquires a detailed error code. + * + * Should be used only after ::BrotliDecoderDecompressStream returns + * ::BROTLI_DECODER_RESULT_ERROR. + * + * See also ::BrotliDecoderErrorString + * + * @param state decoder instance + * @returns last saved error code + */ +BROTLI_DEC_API BrotliDecoderErrorCode BrotliDecoderGetErrorCode( + const BrotliDecoderState* state); + +/** + * Converts error code to a c-string. + */ +BROTLI_DEC_API const char* BrotliDecoderErrorString(BrotliDecoderErrorCode c); + +/** + * Gets a decoder library version. + * + * Look at BROTLI_MAKE_HEX_VERSION for more information. + */ +BROTLI_DEC_API uint32_t BrotliDecoderVersion(void); + +/** + * Callback to fire on metadata block start. + * + * After this callback is fired, if @p size is not @c 0, it is followed by + * ::brotli_decoder_metadata_chunk_func as more metadata block contents become + * accessible. + * + * @param opaque callback handle + * @param size size of metadata block + */ +typedef void (*brotli_decoder_metadata_start_func)(void* opaque, size_t size); + +/** + * Callback to fire on metadata block chunk becomes available. + * + * This function can be invoked multiple times per metadata block; block should + * be considered finished when sum of @p size matches the announced metadata + * block size. Chunks contents pointed by @p data are transient and shouln not + * be accessed after leaving the callback. + * + * @param opaque callback handle + * @param data pointer to metadata contents + * @param size size of metadata block chunk, at least @c 1 + */ +typedef void (*brotli_decoder_metadata_chunk_func)(void* opaque, + const uint8_t* data, + size_t size); + +/** + * Sets callback for receiving metadata blocks. + * + * @param state decoder instance + * @param start_func callback on metadata block start + * @param chunk_func callback on metadata block chunk + * @param opaque callback handle + */ +BROTLI_DEC_API void BrotliDecoderSetMetadataCallbacks( + BrotliDecoderState* state, + brotli_decoder_metadata_start_func start_func, + brotli_decoder_metadata_chunk_func chunk_func, void* opaque); + +#if defined(__cplusplus) || defined(c_plusplus) +} /* extern "C" */ +#endif + +#endif /* BROTLI_DEC_DECODE_H_ */ diff --git a/dependencies/winx64/include/brotli/encode.h b/dependencies/winx64/include/brotli/encode.h new file mode 100644 index 0000000..dea9931 --- /dev/null +++ b/dependencies/winx64/include/brotli/encode.h @@ -0,0 +1,501 @@ +/* Copyright 2013 Google Inc. All Rights Reserved. + + Distributed under MIT license. + See file LICENSE for detail or copy at https://opensource.org/licenses/MIT +*/ + +/** + * @file + * API for Brotli compression. + */ + +#ifndef BROTLI_ENC_ENCODE_H_ +#define BROTLI_ENC_ENCODE_H_ + +#include +#include +#include + +#if defined(__cplusplus) || defined(c_plusplus) +extern "C" { +#endif + +/** Minimal value for ::BROTLI_PARAM_LGWIN parameter. */ +#define BROTLI_MIN_WINDOW_BITS 10 +/** + * Maximal value for ::BROTLI_PARAM_LGWIN parameter. + * + * @note equal to @c BROTLI_MAX_DISTANCE_BITS constant. + */ +#define BROTLI_MAX_WINDOW_BITS 24 +/** + * Maximal value for ::BROTLI_PARAM_LGWIN parameter + * in "Large Window Brotli" (32-bit). + */ +#define BROTLI_LARGE_MAX_WINDOW_BITS 30 +/** Minimal value for ::BROTLI_PARAM_LGBLOCK parameter. */ +#define BROTLI_MIN_INPUT_BLOCK_BITS 16 +/** Maximal value for ::BROTLI_PARAM_LGBLOCK parameter. */ +#define BROTLI_MAX_INPUT_BLOCK_BITS 24 +/** Minimal value for ::BROTLI_PARAM_QUALITY parameter. */ +#define BROTLI_MIN_QUALITY 0 +/** Maximal value for ::BROTLI_PARAM_QUALITY parameter. */ +#define BROTLI_MAX_QUALITY 11 + +/** Options for ::BROTLI_PARAM_MODE parameter. */ +typedef enum BrotliEncoderMode { + /** + * Default compression mode. + * + * In this mode compressor does not know anything in advance about the + * properties of the input. + */ + BROTLI_MODE_GENERIC = 0, + /** Compression mode for UTF-8 formatted text input. */ + BROTLI_MODE_TEXT = 1, + /** Compression mode used in WOFF 2.0. */ + BROTLI_MODE_FONT = 2 +} BrotliEncoderMode; + +/** Default value for ::BROTLI_PARAM_QUALITY parameter. */ +#define BROTLI_DEFAULT_QUALITY 11 +/** Default value for ::BROTLI_PARAM_LGWIN parameter. */ +#define BROTLI_DEFAULT_WINDOW 22 +/** Default value for ::BROTLI_PARAM_MODE parameter. */ +#define BROTLI_DEFAULT_MODE BROTLI_MODE_GENERIC + +/** Operations that can be performed by streaming encoder. */ +typedef enum BrotliEncoderOperation { + /** + * Process input. + * + * Encoder may postpone producing output, until it has processed enough input. + */ + BROTLI_OPERATION_PROCESS = 0, + /** + * Produce output for all processed input. + * + * Actual flush is performed when input stream is depleted and there is enough + * space in output stream. This means that client should repeat + * ::BROTLI_OPERATION_FLUSH operation until @p available_in becomes @c 0, and + * ::BrotliEncoderHasMoreOutput returns ::BROTLI_FALSE. If output is acquired + * via ::BrotliEncoderTakeOutput, then operation should be repeated after + * output buffer is drained. + * + * @warning Until flush is complete, client @b SHOULD @b NOT swap, + * reduce or extend input stream. + * + * When flush is complete, output data will be sufficient for decoder to + * reproduce all the given input. + */ + BROTLI_OPERATION_FLUSH = 1, + /** + * Finalize the stream. + * + * Actual finalization is performed when input stream is depleted and there is + * enough space in output stream. This means that client should repeat + * ::BROTLI_OPERATION_FINISH operation until @p available_in becomes @c 0, and + * ::BrotliEncoderHasMoreOutput returns ::BROTLI_FALSE. If output is acquired + * via ::BrotliEncoderTakeOutput, then operation should be repeated after + * output buffer is drained. + * + * @warning Until finalization is complete, client @b SHOULD @b NOT swap, + * reduce or extend input stream. + * + * Helper function ::BrotliEncoderIsFinished checks if stream is finalized and + * output fully dumped. + * + * Adding more input data to finalized stream is impossible. + */ + BROTLI_OPERATION_FINISH = 2, + /** + * Emit metadata block to stream. + * + * Metadata is opaque to Brotli: neither encoder, nor decoder processes this + * data or relies on it. It may be used to pass some extra information from + * encoder client to decoder client without interfering with main data stream. + * + * @note Encoder may emit empty metadata blocks internally, to pad encoded + * stream to byte boundary. + * + * @warning Until emitting metadata is complete client @b SHOULD @b NOT swap, + * reduce or extend input stream. + * + * @warning The whole content of input buffer is considered to be the content + * of metadata block. Do @b NOT @e append metadata to input stream, + * before it is depleted with other operations. + * + * Stream is soft-flushed before metadata block is emitted. Metadata block + * @b MUST be no longer than than 16MiB. + */ + BROTLI_OPERATION_EMIT_METADATA = 3 +} BrotliEncoderOperation; + +/** Options to be used with ::BrotliEncoderSetParameter. */ +typedef enum BrotliEncoderParameter { + /** + * Tune encoder for specific input. + * + * ::BrotliEncoderMode enumerates all available values. + */ + BROTLI_PARAM_MODE = 0, + /** + * The main compression speed-density lever. + * + * The higher the quality, the slower the compression. Range is + * from ::BROTLI_MIN_QUALITY to ::BROTLI_MAX_QUALITY. + */ + BROTLI_PARAM_QUALITY = 1, + /** + * Recommended sliding LZ77 window size. + * + * Encoder may reduce this value, e.g. if input is much smaller than + * window size. + * + * Window size is `(1 << value) - 16`. + * + * Range is from ::BROTLI_MIN_WINDOW_BITS to ::BROTLI_MAX_WINDOW_BITS. + */ + BROTLI_PARAM_LGWIN = 2, + /** + * Recommended input block size. + * + * Encoder may reduce this value, e.g. if input is much smaller than input + * block size. + * + * Range is from ::BROTLI_MIN_INPUT_BLOCK_BITS to + * ::BROTLI_MAX_INPUT_BLOCK_BITS. + * + * @note Bigger input block size allows better compression, but consumes more + * memory. \n The rough formula of memory used for temporary input + * storage is `3 << lgBlock`. + */ + BROTLI_PARAM_LGBLOCK = 3, + /** + * Flag that affects usage of "literal context modeling" format feature. + * + * This flag is a "decoding-speed vs compression ratio" trade-off. + */ + BROTLI_PARAM_DISABLE_LITERAL_CONTEXT_MODELING = 4, + /** + * Estimated total input size for all ::BrotliEncoderCompressStream calls. + * + * The default value is 0, which means that the total input size is unknown. + */ + BROTLI_PARAM_SIZE_HINT = 5, + /** + * Flag that determines if "Large Window Brotli" is used. + */ + BROTLI_PARAM_LARGE_WINDOW = 6, + /** + * Recommended number of postfix bits (NPOSTFIX). + * + * Encoder may change this value. + * + * Range is from 0 to ::BROTLI_MAX_NPOSTFIX. + */ + BROTLI_PARAM_NPOSTFIX = 7, + /** + * Recommended number of direct distance codes (NDIRECT). + * + * Encoder may change this value. + * + * Range is from 0 to (15 << NPOSTFIX) in steps of (1 << NPOSTFIX). + */ + BROTLI_PARAM_NDIRECT = 8, + /** + * Number of bytes of input stream already processed by a different instance. + * + * @note It is important to configure all the encoder instances with same + * parameters (except this one) in order to allow all the encoded parts + * obey the same restrictions implied by header. + * + * If offset is not 0, then stream header is omitted. + * In any case output start is byte aligned, so for proper streams stitching + * "predecessor" stream must be flushed. + * + * Range is not artificially limited, but all the values greater or equal to + * maximal window size have the same effect. Values greater than 2**30 are not + * allowed. + */ + BROTLI_PARAM_STREAM_OFFSET = 9 +} BrotliEncoderParameter; + +/** + * Opaque structure that holds encoder state. + * + * Allocated and initialized with ::BrotliEncoderCreateInstance. + * Cleaned up and deallocated with ::BrotliEncoderDestroyInstance. + */ +typedef struct BrotliEncoderStateStruct BrotliEncoderState; + +/** + * Sets the specified parameter to the given encoder instance. + * + * @param state encoder instance + * @param param parameter to set + * @param value new parameter value + * @returns ::BROTLI_FALSE if parameter is unrecognized, or value is invalid + * @returns ::BROTLI_FALSE if value of parameter can not be changed at current + * encoder state (e.g. when encoding is started, window size might be + * already encoded and therefore it is impossible to change it) + * @returns ::BROTLI_TRUE if value is accepted + * @warning invalid values might be accepted in case they would not break + * encoding process. + */ +BROTLI_ENC_API BROTLI_BOOL BrotliEncoderSetParameter( + BrotliEncoderState* state, BrotliEncoderParameter param, uint32_t value); + +/** + * Creates an instance of ::BrotliEncoderState and initializes it. + * + * @p alloc_func and @p free_func @b MUST be both zero or both non-zero. In the + * case they are both zero, default memory allocators are used. @p opaque is + * passed to @p alloc_func and @p free_func when they are called. @p free_func + * has to return without doing anything when asked to free a NULL pointer. + * + * @param alloc_func custom memory allocation function + * @param free_func custom memory free function + * @param opaque custom memory manager handle + * @returns @c 0 if instance can not be allocated or initialized + * @returns pointer to initialized ::BrotliEncoderState otherwise + */ +BROTLI_ENC_API BrotliEncoderState* BrotliEncoderCreateInstance( + brotli_alloc_func alloc_func, brotli_free_func free_func, void* opaque); + +/** + * Deinitializes and frees ::BrotliEncoderState instance. + * + * @param state decoder instance to be cleaned up and deallocated + */ +BROTLI_ENC_API void BrotliEncoderDestroyInstance(BrotliEncoderState* state); + +/* Opaque type for pointer to different possible internal structures containing + dictionary prepared for the encoder */ +typedef struct BrotliEncoderPreparedDictionaryStruct + BrotliEncoderPreparedDictionary; + +/** + * Prepares a shared dictionary from the given file format for the encoder. + * + * @p alloc_func and @p free_func @b MUST be both zero or both non-zero. In the + * case they are both zero, default memory allocators are used. @p opaque is + * passed to @p alloc_func and @p free_func when they are called. @p free_func + * has to return without doing anything when asked to free a NULL pointer. + * + * @param type type of dictionary stored in data + * @param data_size size of @p data buffer + * @param data pointer to the dictionary data + * @param quality the maximum Brotli quality to prepare the dictionary for, + * use BROTLI_MAX_QUALITY by default + * @param alloc_func custom memory allocation function + * @param free_func custom memory free function + * @param opaque custom memory manager handle + */ +BROTLI_ENC_API BrotliEncoderPreparedDictionary* +BrotliEncoderPrepareDictionary(BrotliSharedDictionaryType type, + size_t data_size, const uint8_t data[BROTLI_ARRAY_PARAM(data_size)], + int quality, + brotli_alloc_func alloc_func, brotli_free_func free_func, void* opaque); + +BROTLI_ENC_API void BrotliEncoderDestroyPreparedDictionary( + BrotliEncoderPreparedDictionary* dictionary); + +/** + * Attaches a prepared dictionary of any type to the encoder. Can be used + * multiple times to attach multiple dictionaries. The dictionary type was + * determined by BrotliEncoderPrepareDictionary. Multiple raw prefix + * dictionaries and/or max 1 serialized dictionary with custom words can be + * attached. + * + * @returns ::BROTLI_FALSE in case of error + * @returns ::BROTLI_TRUE otherwise + */ +BROTLI_ENC_API BROTLI_BOOL BrotliEncoderAttachPreparedDictionary( + BrotliEncoderState* state, + const BrotliEncoderPreparedDictionary* dictionary); + +/** + * Calculates the output size bound for the given @p input_size. + * + * @warning Result is only valid if quality is at least @c 2 and, in + * case ::BrotliEncoderCompressStream was used, no flushes + * (::BROTLI_OPERATION_FLUSH) were performed. + * + * @param input_size size of projected input + * @returns @c 0 if result does not fit @c size_t + */ +BROTLI_ENC_API size_t BrotliEncoderMaxCompressedSize(size_t input_size); + +/** + * Performs one-shot memory-to-memory compression. + * + * Compresses the data in @p input_buffer into @p encoded_buffer, and sets + * @p *encoded_size to the compressed length. + * + * @note If ::BrotliEncoderMaxCompressedSize(@p input_size) returns non-zero + * value, then output is guaranteed to be no longer than that. + * + * @note If @p lgwin is greater than ::BROTLI_MAX_WINDOW_BITS then resulting + * stream might be incompatible with RFC 7932; to decode such streams, + * decoder should be configured with + * ::BROTLI_DECODER_PARAM_LARGE_WINDOW = @c 1 + * + * @param quality quality parameter value, e.g. ::BROTLI_DEFAULT_QUALITY + * @param lgwin lgwin parameter value, e.g. ::BROTLI_DEFAULT_WINDOW + * @param mode mode parameter value, e.g. ::BROTLI_DEFAULT_MODE + * @param input_size size of @p input_buffer + * @param input_buffer input data buffer with at least @p input_size + * addressable bytes + * @param[in, out] encoded_size @b in: size of @p encoded_buffer; \n + * @b out: length of compressed data written to + * @p encoded_buffer, or @c 0 if compression fails + * @param encoded_buffer compressed data destination buffer + * @returns ::BROTLI_FALSE in case of compression error + * @returns ::BROTLI_FALSE if output buffer is too small + * @returns ::BROTLI_TRUE otherwise + */ +BROTLI_ENC_API BROTLI_BOOL BrotliEncoderCompress( + int quality, int lgwin, BrotliEncoderMode mode, size_t input_size, + const uint8_t input_buffer[BROTLI_ARRAY_PARAM(input_size)], + size_t* encoded_size, + uint8_t encoded_buffer[BROTLI_ARRAY_PARAM(*encoded_size)]); + +/** + * Compresses input stream to output stream. + * + * The values @p *available_in and @p *available_out must specify the number of + * bytes addressable at @p *next_in and @p *next_out respectively. + * When @p *available_out is @c 0, @p next_out is allowed to be @c NULL. + * + * After each call, @p *available_in will be decremented by the amount of input + * bytes consumed, and the @p *next_in pointer will be incremented by that + * amount. Similarly, @p *available_out will be decremented by the amount of + * output bytes written, and the @p *next_out pointer will be incremented by + * that amount. + * + * @p total_out, if it is not a null-pointer, will be set to the number + * of bytes compressed since the last @p state initialization. + * + * + * + * Internally workflow consists of 3 tasks: + * -# (optionally) copy input data to internal buffer + * -# actually compress data and (optionally) store it to internal buffer + * -# (optionally) copy compressed bytes from internal buffer to output stream + * + * Whenever all 3 tasks can't move forward anymore, or error occurs, this + * method returns the control flow to caller. + * + * @p op is used to perform flush, finish the stream, or inject metadata block. + * See ::BrotliEncoderOperation for more information. + * + * Flushing the stream means forcing encoding of all input passed to encoder and + * completing the current output block, so it could be fully decoded by stream + * decoder. To perform flush set @p op to ::BROTLI_OPERATION_FLUSH. + * Under some circumstances (e.g. lack of output stream capacity) this operation + * would require several calls to ::BrotliEncoderCompressStream. The method must + * be called again until both input stream is depleted and encoder has no more + * output (see ::BrotliEncoderHasMoreOutput) after the method is called. + * + * Finishing the stream means encoding of all input passed to encoder and + * adding specific "final" marks, so stream decoder could determine that stream + * is complete. To perform finish set @p op to ::BROTLI_OPERATION_FINISH. + * Under some circumstances (e.g. lack of output stream capacity) this operation + * would require several calls to ::BrotliEncoderCompressStream. The method must + * be called again until both input stream is depleted and encoder has no more + * output (see ::BrotliEncoderHasMoreOutput) after the method is called. + * + * @warning When flushing and finishing, @p op should not change until operation + * is complete; input stream should not be swapped, reduced or + * extended as well. + * + * @param state encoder instance + * @param op requested operation + * @param[in, out] available_in @b in: amount of available input; \n + * @b out: amount of unused input + * @param[in, out] next_in pointer to the next input byte + * @param[in, out] available_out @b in: length of output buffer; \n + * @b out: remaining size of output buffer + * @param[in, out] next_out compressed output buffer cursor; + * can be @c NULL if @p available_out is @c 0 + * @param[out] total_out number of bytes produced so far; can be @c NULL + * @returns ::BROTLI_FALSE if there was an error + * @returns ::BROTLI_TRUE otherwise + */ +BROTLI_ENC_API BROTLI_BOOL BrotliEncoderCompressStream( + BrotliEncoderState* state, BrotliEncoderOperation op, size_t* available_in, + const uint8_t** next_in, size_t* available_out, uint8_t** next_out, + size_t* total_out); + +/** + * Checks if encoder instance reached the final state. + * + * @param state encoder instance + * @returns ::BROTLI_TRUE if encoder is in a state where it reached the end of + * the input and produced all of the output + * @returns ::BROTLI_FALSE otherwise + */ +BROTLI_ENC_API BROTLI_BOOL BrotliEncoderIsFinished(BrotliEncoderState* state); + +/** + * Checks if encoder has more output. + * + * @param state encoder instance + * @returns ::BROTLI_TRUE, if encoder has some unconsumed output + * @returns ::BROTLI_FALSE otherwise + */ +BROTLI_ENC_API BROTLI_BOOL BrotliEncoderHasMoreOutput( + BrotliEncoderState* state); + +/** + * Acquires pointer to internal output buffer. + * + * This method is used to make language bindings easier and more efficient: + * -# push data to ::BrotliEncoderCompressStream, + * until ::BrotliEncoderHasMoreOutput returns BROTLI_TRUE + * -# use ::BrotliEncoderTakeOutput to peek bytes and copy to language-specific + * entity + * + * Also this could be useful if there is an output stream that is able to + * consume all the provided data (e.g. when data is saved to file system). + * + * @attention After every call to ::BrotliEncoderTakeOutput @p *size bytes of + * output are considered consumed for all consecutive calls to the + * instance methods; returned pointer becomes invalidated as well. + * + * @note Encoder output is not guaranteed to be contiguous. This means that + * after the size-unrestricted call to ::BrotliEncoderTakeOutput, + * immediate next call to ::BrotliEncoderTakeOutput may return more data. + * + * @param state encoder instance + * @param[in, out] size @b in: number of bytes caller is ready to take, @c 0 if + * any amount could be handled; \n + * @b out: amount of data pointed by returned pointer and + * considered consumed; \n + * out value is never greater than in value, unless it is @c 0 + * @returns pointer to output data + */ +BROTLI_ENC_API const uint8_t* BrotliEncoderTakeOutput( + BrotliEncoderState* state, size_t* size); + +/* Returns the estimated peak memory usage (in bytes) of the BrotliCompress() + function, not counting the memory needed for the input and output. */ +BROTLI_ENC_EXTRA_API size_t BrotliEncoderEstimatePeakMemoryUsage( + int quality, int lgwin, size_t input_size); +/* Returns 0 if dictionary is not valid; otherwise returns allocation size. */ +BROTLI_ENC_EXTRA_API size_t BrotliEncoderGetPreparedDictionarySize( + const BrotliEncoderPreparedDictionary* dictionary); + +/** + * Gets an encoder library version. + * + * Look at BROTLI_MAKE_HEX_VERSION for more information. + */ +BROTLI_ENC_API uint32_t BrotliEncoderVersion(void); + +#if defined(__cplusplus) || defined(c_plusplus) +} /* extern "C" */ +#endif + +#endif /* BROTLI_ENC_ENCODE_H_ */ diff --git a/dependencies/winx64/include/brotli/port.h b/dependencies/winx64/include/brotli/port.h new file mode 100644 index 0000000..0d50019 --- /dev/null +++ b/dependencies/winx64/include/brotli/port.h @@ -0,0 +1,305 @@ +/* Copyright 2016 Google Inc. All Rights Reserved. + + Distributed under MIT license. + See file LICENSE for detail or copy at https://opensource.org/licenses/MIT +*/ + +/* Macros for compiler / platform specific API declarations. */ + +#ifndef BROTLI_COMMON_PORT_H_ +#define BROTLI_COMMON_PORT_H_ + +/* The following macros were borrowed from https://github.com/nemequ/hedley + * with permission of original author - Evan Nemerson */ + +/* >>> >>> >>> hedley macros */ + +#define BROTLI_MAKE_VERSION(major, minor, revision) \ + (((major) * 1000000) + ((minor) * 1000) + (revision)) + +#if defined(__GNUC__) && defined(__GNUC_PATCHLEVEL__) +#define BROTLI_GNUC_VERSION \ + BROTLI_MAKE_VERSION(__GNUC__, __GNUC_MINOR__, __GNUC_PATCHLEVEL__) +#elif defined(__GNUC__) +#define BROTLI_GNUC_VERSION BROTLI_MAKE_VERSION(__GNUC__, __GNUC_MINOR__, 0) +#endif + +#if defined(BROTLI_GNUC_VERSION) +#define BROTLI_GNUC_VERSION_CHECK(major, minor, patch) \ + (BROTLI_GNUC_VERSION >= BROTLI_MAKE_VERSION(major, minor, patch)) +#else +#define BROTLI_GNUC_VERSION_CHECK(major, minor, patch) (0) +#endif + +#if defined(_MSC_FULL_VER) && (_MSC_FULL_VER >= 140000000) +#define BROTLI_MSVC_VERSION \ + BROTLI_MAKE_VERSION((_MSC_FULL_VER / 10000000), \ + (_MSC_FULL_VER % 10000000) / 100000, \ + (_MSC_FULL_VER % 100000) / 100) +#elif defined(_MSC_FULL_VER) +#define BROTLI_MSVC_VERSION \ + BROTLI_MAKE_VERSION((_MSC_FULL_VER / 1000000), \ + (_MSC_FULL_VER % 1000000) / 10000, \ + (_MSC_FULL_VER % 10000) / 10) +#elif defined(_MSC_VER) +#define BROTLI_MSVC_VERSION \ + BROTLI_MAKE_VERSION(_MSC_VER / 100, _MSC_VER % 100, 0) +#endif + +#if !defined(_MSC_VER) +#define BROTLI_MSVC_VERSION_CHECK(major, minor, patch) (0) +#elif defined(_MSC_VER) && (_MSC_VER >= 1400) +#define BROTLI_MSVC_VERSION_CHECK(major, minor, patch) \ + (_MSC_FULL_VER >= ((major * 10000000) + (minor * 100000) + (patch))) +#elif defined(_MSC_VER) && (_MSC_VER >= 1200) +#define BROTLI_MSVC_VERSION_CHECK(major, minor, patch) \ + (_MSC_FULL_VER >= ((major * 1000000) + (minor * 10000) + (patch))) +#else +#define BROTLI_MSVC_VERSION_CHECK(major, minor, patch) \ + (_MSC_VER >= ((major * 100) + (minor))) +#endif + +#if defined(__INTEL_COMPILER) && defined(__INTEL_COMPILER_UPDATE) +#define BROTLI_INTEL_VERSION \ + BROTLI_MAKE_VERSION(__INTEL_COMPILER / 100, \ + __INTEL_COMPILER % 100, \ + __INTEL_COMPILER_UPDATE) +#elif defined(__INTEL_COMPILER) +#define BROTLI_INTEL_VERSION \ + BROTLI_MAKE_VERSION(__INTEL_COMPILER / 100, __INTEL_COMPILER % 100, 0) +#endif + +#if defined(BROTLI_INTEL_VERSION) +#define BROTLI_INTEL_VERSION_CHECK(major, minor, patch) \ + (BROTLI_INTEL_VERSION >= BROTLI_MAKE_VERSION(major, minor, patch)) +#else +#define BROTLI_INTEL_VERSION_CHECK(major, minor, patch) (0) +#endif + +#if defined(__PGI) && \ + defined(__PGIC__) && defined(__PGIC_MINOR__) && defined(__PGIC_PATCHLEVEL__) +#define BROTLI_PGI_VERSION \ + BROTLI_MAKE_VERSION(__PGIC__, __PGIC_MINOR__, __PGIC_PATCHLEVEL__) +#endif + +#if defined(BROTLI_PGI_VERSION) +#define BROTLI_PGI_VERSION_CHECK(major, minor, patch) \ + (BROTLI_PGI_VERSION >= BROTLI_MAKE_VERSION(major, minor, patch)) +#else +#define BROTLI_PGI_VERSION_CHECK(major, minor, patch) (0) +#endif + +#if defined(__SUNPRO_C) && (__SUNPRO_C > 0x1000) +#define BROTLI_SUNPRO_VERSION \ + BROTLI_MAKE_VERSION( \ + (((__SUNPRO_C >> 16) & 0xf) * 10) + ((__SUNPRO_C >> 12) & 0xf), \ + (((__SUNPRO_C >> 8) & 0xf) * 10) + ((__SUNPRO_C >> 4) & 0xf), \ + (__SUNPRO_C & 0xf) * 10) +#elif defined(__SUNPRO_C) +#define BROTLI_SUNPRO_VERSION \ + BROTLI_MAKE_VERSION((__SUNPRO_C >> 8) & 0xf, \ + (__SUNPRO_C >> 4) & 0xf, \ + (__SUNPRO_C) & 0xf) +#elif defined(__SUNPRO_CC) && (__SUNPRO_CC > 0x1000) +#define BROTLI_SUNPRO_VERSION \ + BROTLI_MAKE_VERSION( \ + (((__SUNPRO_CC >> 16) & 0xf) * 10) + ((__SUNPRO_CC >> 12) & 0xf), \ + (((__SUNPRO_CC >> 8) & 0xf) * 10) + ((__SUNPRO_CC >> 4) & 0xf), \ + (__SUNPRO_CC & 0xf) * 10) +#elif defined(__SUNPRO_CC) +#define BROTLI_SUNPRO_VERSION \ + BROTLI_MAKE_VERSION((__SUNPRO_CC >> 8) & 0xf, \ + (__SUNPRO_CC >> 4) & 0xf, \ + (__SUNPRO_CC) & 0xf) +#endif + +#if defined(BROTLI_SUNPRO_VERSION) +#define BROTLI_SUNPRO_VERSION_CHECK(major, minor, patch) \ + (BROTLI_SUNPRO_VERSION >= BROTLI_MAKE_VERSION(major, minor, patch)) +#else +#define BROTLI_SUNPRO_VERSION_CHECK(major, minor, patch) (0) +#endif + +#if defined(__CC_ARM) && defined(__ARMCOMPILER_VERSION) +#define BROTLI_ARM_VERSION \ + BROTLI_MAKE_VERSION((__ARMCOMPILER_VERSION / 1000000), \ + (__ARMCOMPILER_VERSION % 1000000) / 10000, \ + (__ARMCOMPILER_VERSION % 10000) / 100) +#elif defined(__CC_ARM) && defined(__ARMCC_VERSION) +#define BROTLI_ARM_VERSION \ + BROTLI_MAKE_VERSION((__ARMCC_VERSION / 1000000), \ + (__ARMCC_VERSION % 1000000) / 10000, \ + (__ARMCC_VERSION % 10000) / 100) +#endif + +#if defined(BROTLI_ARM_VERSION) +#define BROTLI_ARM_VERSION_CHECK(major, minor, patch) \ + (BROTLI_ARM_VERSION >= BROTLI_MAKE_VERSION(major, minor, patch)) +#else +#define BROTLI_ARM_VERSION_CHECK(major, minor, patch) (0) +#endif + +#if defined(__ibmxl__) +#define BROTLI_IBM_VERSION \ + BROTLI_MAKE_VERSION(__ibmxl_version__, \ + __ibmxl_release__, \ + __ibmxl_modification__) +#elif defined(__xlC__) && defined(__xlC_ver__) +#define BROTLI_IBM_VERSION \ + BROTLI_MAKE_VERSION(__xlC__ >> 8, __xlC__ & 0xff, (__xlC_ver__ >> 8) & 0xff) +#elif defined(__xlC__) +#define BROTLI_IBM_VERSION BROTLI_MAKE_VERSION(__xlC__ >> 8, __xlC__ & 0xff, 0) +#endif + +#if defined(BROTLI_IBM_VERSION) +#define BROTLI_IBM_VERSION_CHECK(major, minor, patch) \ + (BROTLI_IBM_VERSION >= BROTLI_MAKE_VERSION(major, minor, patch)) +#else +#define BROTLI_IBM_VERSION_CHECK(major, minor, patch) (0) +#endif + +#if defined(__TI_COMPILER_VERSION__) +#define BROTLI_TI_VERSION \ + BROTLI_MAKE_VERSION((__TI_COMPILER_VERSION__ / 1000000), \ + (__TI_COMPILER_VERSION__ % 1000000) / 1000, \ + (__TI_COMPILER_VERSION__ % 1000)) +#endif + +#if defined(BROTLI_TI_VERSION) +#define BROTLI_TI_VERSION_CHECK(major, minor, patch) \ + (BROTLI_TI_VERSION >= BROTLI_MAKE_VERSION(major, minor, patch)) +#else +#define BROTLI_TI_VERSION_CHECK(major, minor, patch) (0) +#endif + +#if defined(__IAR_SYSTEMS_ICC__) +#if __VER__ > 1000 +#define BROTLI_IAR_VERSION \ + BROTLI_MAKE_VERSION((__VER__ / 1000000), \ + (__VER__ / 1000) % 1000, \ + (__VER__ % 1000)) +#else +#define BROTLI_IAR_VERSION BROTLI_MAKE_VERSION(VER / 100, __VER__ % 100, 0) +#endif +#endif + +#if defined(BROTLI_IAR_VERSION) +#define BROTLI_IAR_VERSION_CHECK(major, minor, patch) \ + (BROTLI_IAR_VERSION >= BROTLI_MAKE_VERSION(major, minor, patch)) +#else +#define BROTLI_IAR_VERSION_CHECK(major, minor, patch) (0) +#endif + +#if defined(__TINYC__) +#define BROTLI_TINYC_VERSION \ + BROTLI_MAKE_VERSION(__TINYC__ / 1000, (__TINYC__ / 100) % 10, __TINYC__ % 100) +#endif + +#if defined(BROTLI_TINYC_VERSION) +#define BROTLI_TINYC_VERSION_CHECK(major, minor, patch) \ + (BROTLI_TINYC_VERSION >= BROTLI_MAKE_VERSION(major, minor, patch)) +#else +#define BROTLI_TINYC_VERSION_CHECK(major, minor, patch) (0) +#endif + +#if defined(__has_attribute) +#define BROTLI_GNUC_HAS_ATTRIBUTE(attribute, major, minor, patch) \ + __has_attribute(attribute) +#else +#define BROTLI_GNUC_HAS_ATTRIBUTE(attribute, major, minor, patch) \ + BROTLI_GNUC_VERSION_CHECK(major, minor, patch) +#endif + +#if defined(__has_builtin) +#define BROTLI_GNUC_HAS_BUILTIN(builtin, major, minor, patch) \ + __has_builtin(builtin) +#else +#define BROTLI_GNUC_HAS_BUILTIN(builtin, major, minor, patch) \ + BROTLI_GNUC_VERSION_CHECK(major, minor, patch) +#endif + +#if defined(__has_feature) +#define BROTLI_HAS_FEATURE(feature) __has_feature(feature) +#else +#define BROTLI_HAS_FEATURE(feature) (0) +#endif + +#if defined(_WIN32) || defined(__CYGWIN__) +#define BROTLI_PUBLIC +#elif BROTLI_GNUC_VERSION_CHECK(3, 3, 0) || \ + BROTLI_TI_VERSION_CHECK(8, 0, 0) || \ + BROTLI_INTEL_VERSION_CHECK(16, 0, 0) || \ + BROTLI_ARM_VERSION_CHECK(4, 1, 0) || \ + BROTLI_IBM_VERSION_CHECK(13, 1, 0) || \ + BROTLI_SUNPRO_VERSION_CHECK(5, 11, 0) || \ + (BROTLI_TI_VERSION_CHECK(7, 3, 0) && \ + defined(__TI_GNU_ATTRIBUTE_SUPPORT__) && defined(__TI_EABI__)) +#define BROTLI_PUBLIC __attribute__ ((visibility ("default"))) +#else +#define BROTLI_PUBLIC +#endif + +/* BROTLI_INTERNAL could be defined to override visibility, e.g. for tests. */ +#if !defined(BROTLI_INTERNAL) +#if defined(_WIN32) || defined(__CYGWIN__) +#define BROTLI_INTERNAL +#elif BROTLI_GNUC_VERSION_CHECK(3, 3, 0) || \ + BROTLI_TI_VERSION_CHECK(8, 0, 0) || \ + BROTLI_INTEL_VERSION_CHECK(16, 0, 0) || \ + BROTLI_ARM_VERSION_CHECK(4, 1, 0) || \ + BROTLI_IBM_VERSION_CHECK(13, 1, 0) || \ + BROTLI_SUNPRO_VERSION_CHECK(5, 11, 0) || \ + (BROTLI_TI_VERSION_CHECK(7, 3, 0) && \ + defined(__TI_GNU_ATTRIBUTE_SUPPORT__) && defined(__TI_EABI__)) +#define BROTLI_INTERNAL __attribute__ ((visibility ("hidden"))) +#else +#define BROTLI_INTERNAL +#endif +#endif + +#if defined(__STDC_VERSION__) && (__STDC_VERSION__ >= 199901L) && \ + !defined(__STDC_NO_VLA__) && !defined(__cplusplus) && \ + !defined(__PGI) && !defined(__PGIC__) && !defined(__TINYC__) && \ + !defined(__clang__) +#define BROTLI_ARRAY_PARAM(name) (name) +#else +#define BROTLI_ARRAY_PARAM(name) +#endif + +/* <<< <<< <<< end of hedley macros. */ + +#if defined(BROTLI_SHARED_COMPILATION) +#if defined(_WIN32) +#if defined(BROTLICOMMON_SHARED_COMPILATION) +#define BROTLI_COMMON_API __declspec(dllexport) +#else +#define BROTLI_COMMON_API __declspec(dllimport) +#endif /* BROTLICOMMON_SHARED_COMPILATION */ +#if defined(BROTLIDEC_SHARED_COMPILATION) +#define BROTLI_DEC_API __declspec(dllexport) +#else +#define BROTLI_DEC_API __declspec(dllimport) +#endif /* BROTLIDEC_SHARED_COMPILATION */ +#if defined(BROTLIENC_SHARED_COMPILATION) +#define BROTLI_ENC_API __declspec(dllexport) +#else +#define BROTLI_ENC_API __declspec(dllimport) +#endif /* BROTLIENC_SHARED_COMPILATION */ +#else /* _WIN32 */ +#define BROTLI_COMMON_API BROTLI_PUBLIC +#define BROTLI_DEC_API BROTLI_PUBLIC +#define BROTLI_ENC_API BROTLI_PUBLIC +#endif /* _WIN32 */ +#else /* BROTLI_SHARED_COMPILATION */ +#define BROTLI_COMMON_API +#define BROTLI_DEC_API +#define BROTLI_ENC_API +#endif + +#if defined(BROTLI_BUILD_ENC_EXTRA_API) +#define BROTLI_ENC_EXTRA_API BROTLI_ENC_API +#else +#define BROTLI_ENC_EXTRA_API BROTLI_INTERNAL +#endif + +#endif /* BROTLI_COMMON_PORT_H_ */ diff --git a/dependencies/winx64/include/brotli/shared_dictionary.h b/dependencies/winx64/include/brotli/shared_dictionary.h new file mode 100644 index 0000000..2970c2d --- /dev/null +++ b/dependencies/winx64/include/brotli/shared_dictionary.h @@ -0,0 +1,100 @@ +/* Copyright 2017 Google Inc. All Rights Reserved. + + Distributed under MIT license. + See file LICENSE for detail or copy at https://opensource.org/licenses/MIT +*/ + +/* (Opaque) Shared Dictionary definition and utilities. */ + +#ifndef BROTLI_COMMON_SHARED_DICTIONARY_H_ +#define BROTLI_COMMON_SHARED_DICTIONARY_H_ + +#include +#include + +#if defined(__cplusplus) || defined(c_plusplus) +extern "C" { +#endif + +#define SHARED_BROTLI_MIN_DICTIONARY_WORD_LENGTH 4 +#define SHARED_BROTLI_MAX_DICTIONARY_WORD_LENGTH 31 +#define SHARED_BROTLI_NUM_DICTIONARY_CONTEXTS 64 +#define SHARED_BROTLI_MAX_COMPOUND_DICTS 15 + +/** + * Opaque structure that holds shared dictionary data. + * + * Allocated and initialized with ::BrotliSharedDictionaryCreateInstance. + * Cleaned up and deallocated with ::BrotliSharedDictionaryDestroyInstance. + */ +typedef struct BrotliSharedDictionaryStruct BrotliSharedDictionary; + +/** + * Input data type for ::BrotliSharedDictionaryAttach. + */ +typedef enum BrotliSharedDictionaryType { + /** Raw LZ77 prefix dictionary. */ + BROTLI_SHARED_DICTIONARY_RAW = 0, + /** Serialized shared dictionary. + * + * DO NOT USE: methods accepting this value will fail. + */ + BROTLI_SHARED_DICTIONARY_SERIALIZED = 1 +} BrotliSharedDictionaryType; + +/** + * Creates an instance of ::BrotliSharedDictionary. + * + * Fresh instance has default word dictionary and transforms + * and no LZ77 prefix dictionary. + * + * @p alloc_func and @p free_func @b MUST be both zero or both non-zero. In the + * case they are both zero, default memory allocators are used. @p opaque is + * passed to @p alloc_func and @p free_func when they are called. @p free_func + * has to return without doing anything when asked to free a NULL pointer. + * + * @param alloc_func custom memory allocation function + * @param free_func custom memory free function + * @param opaque custom memory manager handle + * @returns @c 0 if instance can not be allocated or initialized + * @returns pointer to initialized ::BrotliSharedDictionary otherwise + */ +BROTLI_COMMON_API BrotliSharedDictionary* BrotliSharedDictionaryCreateInstance( + brotli_alloc_func alloc_func, brotli_free_func free_func, void* opaque); + +/** + * Deinitializes and frees ::BrotliSharedDictionary instance. + * + * @param dict shared dictionary instance to be cleaned up and deallocated + */ +BROTLI_COMMON_API void BrotliSharedDictionaryDestroyInstance( + BrotliSharedDictionary* dict); + +/** + * Attaches dictionary to a given instance of ::BrotliSharedDictionary. + * + * Dictionary to be attached is represented in a serialized format as a region + * of memory. + * + * Provided data it partially referenced by a resulting (compound) dictionary, + * and should be kept untouched, while at least one compound dictionary uses it. + * This way memory overhead is kept minimal by the cost of additional resource + * management. + * + * @param dict dictionary to extend + * @param type type of dictionary to attach + * @param data_size size of @p data + * @param data serialized dictionary of type @p type, with at least @p data_size + * addressable bytes + * @returns ::BROTLI_TRUE if provided dictionary is successfully attached + * @returns ::BROTLI_FALSE otherwise + */ +BROTLI_COMMON_API BROTLI_BOOL BrotliSharedDictionaryAttach( + BrotliSharedDictionary* dict, BrotliSharedDictionaryType type, + size_t data_size, const uint8_t data[BROTLI_ARRAY_PARAM(data_size)]); + +#if defined(__cplusplus) || defined(c_plusplus) +} /* extern "C" */ +#endif + +#endif /* BROTLI_COMMON_SHARED_DICTIONARY_H_ */ diff --git a/dependencies/winx64/include/brotli/types.h b/dependencies/winx64/include/brotli/types.h new file mode 100644 index 0000000..eff1a3c --- /dev/null +++ b/dependencies/winx64/include/brotli/types.h @@ -0,0 +1,83 @@ +/* Copyright 2013 Google Inc. All Rights Reserved. + + Distributed under MIT license. + See file LICENSE for detail or copy at https://opensource.org/licenses/MIT +*/ + +/** + * @file + * Common types used in decoder and encoder API. + */ + +#ifndef BROTLI_COMMON_TYPES_H_ +#define BROTLI_COMMON_TYPES_H_ + +#include /* for size_t */ + +#if defined(_MSC_VER) && (_MSC_VER < 1600) +typedef __int8 int8_t; +typedef unsigned __int8 uint8_t; +typedef __int16 int16_t; +typedef unsigned __int16 uint16_t; +typedef __int32 int32_t; +typedef unsigned __int32 uint32_t; +typedef unsigned __int64 uint64_t; +typedef __int64 int64_t; +#else +#include +#endif /* defined(_MSC_VER) && (_MSC_VER < 1600) */ + +/** + * A portable @c bool replacement. + * + * ::BROTLI_BOOL is a "documentation" type: actually it is @c int, but in API it + * denotes a type, whose only values are ::BROTLI_TRUE and ::BROTLI_FALSE. + * + * ::BROTLI_BOOL values passed to Brotli should either be ::BROTLI_TRUE or + * ::BROTLI_FALSE, or be a result of ::TO_BROTLI_BOOL macros. + * + * ::BROTLI_BOOL values returned by Brotli should not be tested for equality + * with @c true, @c false, ::BROTLI_TRUE, ::BROTLI_FALSE, but rather should be + * evaluated, for example: @code{.cpp} + * if (SomeBrotliFunction(encoder, BROTLI_TRUE) && + * !OtherBrotliFunction(decoder, BROTLI_FALSE)) { + * bool x = !!YetAnotherBrotliFunction(encoder, TO_BROLTI_BOOL(2 * 2 == 4)); + * DoSomething(x); + * } + * @endcode + */ +#define BROTLI_BOOL int +/** Portable @c true replacement. */ +#define BROTLI_TRUE 1 +/** Portable @c false replacement. */ +#define BROTLI_FALSE 0 +/** @c bool to ::BROTLI_BOOL conversion macros. */ +#define TO_BROTLI_BOOL(X) (!!(X) ? BROTLI_TRUE : BROTLI_FALSE) + +#define BROTLI_MAKE_UINT64_T(high, low) ((((uint64_t)(high)) << 32) | low) + +#define BROTLI_UINT32_MAX (~((uint32_t)0)) +#define BROTLI_SIZE_MAX (~((size_t)0)) + +/** + * Allocating function pointer type. + * + * @param opaque custom memory manager handle provided by client + * @param size requested memory region size; can not be @c 0 + * @returns @c 0 in the case of failure + * @returns a valid pointer to a memory region of at least @p size bytes + * long otherwise + */ +typedef void* (*brotli_alloc_func)(void* opaque, size_t size); + +/** + * Deallocating function pointer type. + * + * This function @b SHOULD do nothing if @p address is @c 0. + * + * @param opaque custom memory manager handle provided by client + * @param address memory region pointer returned by ::brotli_alloc_func, or @c 0 + */ +typedef void (*brotli_free_func)(void* opaque, void* address); + +#endif /* BROTLI_COMMON_TYPES_H_ */ diff --git a/dependencies/winx64/include/bzlib.h b/dependencies/winx64/include/bzlib.h new file mode 100644 index 0000000..8966a6c --- /dev/null +++ b/dependencies/winx64/include/bzlib.h @@ -0,0 +1,282 @@ + +/*-------------------------------------------------------------*/ +/*--- Public header file for the library. ---*/ +/*--- bzlib.h ---*/ +/*-------------------------------------------------------------*/ + +/* ------------------------------------------------------------------ + This file is part of bzip2/libbzip2, a program and library for + lossless, block-sorting data compression. + + bzip2/libbzip2 version 1.0.8 of 13 July 2019 + Copyright (C) 1996-2019 Julian Seward + + Please read the WARNING, DISCLAIMER and PATENTS sections in the + README file. + + This program is released under the terms of the license contained + in the file LICENSE. + ------------------------------------------------------------------ */ + + +#ifndef _BZLIB_H +#define _BZLIB_H + +#ifdef __cplusplus +extern "C" { +#endif + +#define BZ_RUN 0 +#define BZ_FLUSH 1 +#define BZ_FINISH 2 + +#define BZ_OK 0 +#define BZ_RUN_OK 1 +#define BZ_FLUSH_OK 2 +#define BZ_FINISH_OK 3 +#define BZ_STREAM_END 4 +#define BZ_SEQUENCE_ERROR (-1) +#define BZ_PARAM_ERROR (-2) +#define BZ_MEM_ERROR (-3) +#define BZ_DATA_ERROR (-4) +#define BZ_DATA_ERROR_MAGIC (-5) +#define BZ_IO_ERROR (-6) +#define BZ_UNEXPECTED_EOF (-7) +#define BZ_OUTBUFF_FULL (-8) +#define BZ_CONFIG_ERROR (-9) + +typedef + struct { + char *next_in; + unsigned int avail_in; + unsigned int total_in_lo32; + unsigned int total_in_hi32; + + char *next_out; + unsigned int avail_out; + unsigned int total_out_lo32; + unsigned int total_out_hi32; + + void *state; + + void *(*bzalloc)(void *,int,int); + void (*bzfree)(void *,void *); + void *opaque; + } + bz_stream; + + +#ifndef BZ_IMPORT +#define BZ_EXPORT +#endif + +#ifndef BZ_NO_STDIO +/* Need a definitition for FILE */ +#include +#endif + +#ifdef _WIN32 +# include +# ifdef small + /* windows.h define small to char */ +# undef small +# endif +# ifdef BZ_EXPORT +# define BZ_API(func) WINAPI func +# define BZ_EXTERN extern +# else + /* import windows dll dynamically */ +# define BZ_API(func) (WINAPI * func) +# define BZ_EXTERN +# endif +#else +# define BZ_API(func) func +# define BZ_EXTERN extern +#endif + + +/*-- Core (low-level) library functions --*/ + +BZ_EXTERN int BZ_API(BZ2_bzCompressInit) ( + bz_stream* strm, + int blockSize100k, + int verbosity, + int workFactor + ); + +BZ_EXTERN int BZ_API(BZ2_bzCompress) ( + bz_stream* strm, + int action + ); + +BZ_EXTERN int BZ_API(BZ2_bzCompressEnd) ( + bz_stream* strm + ); + +BZ_EXTERN int BZ_API(BZ2_bzDecompressInit) ( + bz_stream *strm, + int verbosity, + int small + ); + +BZ_EXTERN int BZ_API(BZ2_bzDecompress) ( + bz_stream* strm + ); + +BZ_EXTERN int BZ_API(BZ2_bzDecompressEnd) ( + bz_stream *strm + ); + + + +/*-- High(er) level library functions --*/ + +#ifndef BZ_NO_STDIO +#define BZ_MAX_UNUSED 5000 + +typedef void BZFILE; + +BZ_EXTERN BZFILE* BZ_API(BZ2_bzReadOpen) ( + int* bzerror, + FILE* f, + int verbosity, + int small, + void* unused, + int nUnused + ); + +BZ_EXTERN void BZ_API(BZ2_bzReadClose) ( + int* bzerror, + BZFILE* b + ); + +BZ_EXTERN void BZ_API(BZ2_bzReadGetUnused) ( + int* bzerror, + BZFILE* b, + void** unused, + int* nUnused + ); + +BZ_EXTERN int BZ_API(BZ2_bzRead) ( + int* bzerror, + BZFILE* b, + void* buf, + int len + ); + +BZ_EXTERN BZFILE* BZ_API(BZ2_bzWriteOpen) ( + int* bzerror, + FILE* f, + int blockSize100k, + int verbosity, + int workFactor + ); + +BZ_EXTERN void BZ_API(BZ2_bzWrite) ( + int* bzerror, + BZFILE* b, + void* buf, + int len + ); + +BZ_EXTERN void BZ_API(BZ2_bzWriteClose) ( + int* bzerror, + BZFILE* b, + int abandon, + unsigned int* nbytes_in, + unsigned int* nbytes_out + ); + +BZ_EXTERN void BZ_API(BZ2_bzWriteClose64) ( + int* bzerror, + BZFILE* b, + int abandon, + unsigned int* nbytes_in_lo32, + unsigned int* nbytes_in_hi32, + unsigned int* nbytes_out_lo32, + unsigned int* nbytes_out_hi32 + ); +#endif + + +/*-- Utility functions --*/ + +BZ_EXTERN int BZ_API(BZ2_bzBuffToBuffCompress) ( + char* dest, + unsigned int* destLen, + char* source, + unsigned int sourceLen, + int blockSize100k, + int verbosity, + int workFactor + ); + +BZ_EXTERN int BZ_API(BZ2_bzBuffToBuffDecompress) ( + char* dest, + unsigned int* destLen, + char* source, + unsigned int sourceLen, + int small, + int verbosity + ); + + +/*-- + Code contributed by Yoshioka Tsuneo (tsuneo@rr.iij4u.or.jp) + to support better zlib compatibility. + This code is not _officially_ part of libbzip2 (yet); + I haven't tested it, documented it, or considered the + threading-safeness of it. + If this code breaks, please contact both Yoshioka and me. +--*/ + +BZ_EXTERN const char * BZ_API(BZ2_bzlibVersion) ( + void + ); + +#ifndef BZ_NO_STDIO +BZ_EXTERN BZFILE * BZ_API(BZ2_bzopen) ( + const char *path, + const char *mode + ); + +BZ_EXTERN BZFILE * BZ_API(BZ2_bzdopen) ( + int fd, + const char *mode + ); + +BZ_EXTERN int BZ_API(BZ2_bzread) ( + BZFILE* b, + void* buf, + int len + ); + +BZ_EXTERN int BZ_API(BZ2_bzwrite) ( + BZFILE* b, + void* buf, + int len + ); + +BZ_EXTERN int BZ_API(BZ2_bzflush) ( + BZFILE* b + ); + +BZ_EXTERN void BZ_API(BZ2_bzclose) ( + BZFILE* b + ); + +BZ_EXTERN const char * BZ_API(BZ2_bzerror) ( + BZFILE *b, + int *errnum + ); +#endif + +#ifdef __cplusplus +} +#endif + +#endif + +/*-------------------------------------------------------------*/ +/*--- end bzlib.h ---*/ +/*-------------------------------------------------------------*/ diff --git a/dependencies/winx64/include/freetype2/freetype/config/ftconfig.h b/dependencies/winx64/include/freetype2/freetype/config/ftconfig.h new file mode 100644 index 0000000..0667493 --- /dev/null +++ b/dependencies/winx64/include/freetype2/freetype/config/ftconfig.h @@ -0,0 +1,51 @@ +/**************************************************************************** + * + * ftconfig.h + * + * ANSI-specific configuration file (specification only). + * + * Copyright (C) 1996-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + + /************************************************************************** + * + * This header file contains a number of macro definitions that are used by + * the rest of the engine. Most of the macros here are automatically + * determined at compile time, and you should not need to change it to port + * FreeType, except to compile the library with a non-ANSI compiler. + * + * Note however that if some specific modifications are needed, we advise + * you to place a modified copy in your build directory. + * + * The build directory is usually `builds/`, and contains + * system-specific files that are always included first when building the + * library. + * + * This ANSI version should stay in `include/config/`. + * + */ + +#ifndef FTCONFIG_H_ +#define FTCONFIG_H_ + +#include +#include FT_CONFIG_OPTIONS_H +#include FT_CONFIG_STANDARD_LIBRARY_H + +#include +#include +#include + +#endif /* FTCONFIG_H_ */ + + +/* END */ diff --git a/dependencies/winx64/include/freetype2/freetype/config/ftheader.h b/dependencies/winx64/include/freetype2/freetype/config/ftheader.h new file mode 100644 index 0000000..f6ef261 --- /dev/null +++ b/dependencies/winx64/include/freetype2/freetype/config/ftheader.h @@ -0,0 +1,836 @@ +/**************************************************************************** + * + * ftheader.h + * + * Build macros of the FreeType 2 library. + * + * Copyright (C) 1996-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + +#ifndef FTHEADER_H_ +#define FTHEADER_H_ + + + /*@***********************************************************************/ + /* */ + /* */ + /* FT_BEGIN_HEADER */ + /* */ + /* */ + /* This macro is used in association with @FT_END_HEADER in header */ + /* files to ensure that the declarations within are properly */ + /* encapsulated in an `extern "C" { .. }` block when included from a */ + /* C++ compiler. */ + /* */ +#ifndef FT_BEGIN_HEADER +# ifdef __cplusplus +# define FT_BEGIN_HEADER extern "C" { +# else +# define FT_BEGIN_HEADER /* nothing */ +# endif +#endif + + + /*@***********************************************************************/ + /* */ + /* */ + /* FT_END_HEADER */ + /* */ + /* */ + /* This macro is used in association with @FT_BEGIN_HEADER in header */ + /* files to ensure that the declarations within are properly */ + /* encapsulated in an `extern "C" { .. }` block when included from a */ + /* C++ compiler. */ + /* */ +#ifndef FT_END_HEADER +# ifdef __cplusplus +# define FT_END_HEADER } +# else +# define FT_END_HEADER /* nothing */ +# endif +#endif + + + /************************************************************************** + * + * Aliases for the FreeType 2 public and configuration files. + * + */ + + /************************************************************************** + * + * @section: + * header_file_macros + * + * @title: + * Header File Macros + * + * @abstract: + * Macro definitions used to `#include` specific header files. + * + * @description: + * In addition to the normal scheme of including header files like + * + * ``` + * #include + * #include + * #include + * ``` + * + * it is possible to used named macros instead. They can be used + * directly in `#include` statements as in + * + * ``` + * #include FT_FREETYPE_H + * #include FT_MULTIPLE_MASTERS_H + * #include FT_GLYPH_H + * ``` + * + * These macros were introduced to overcome the infamous 8.3~naming rule + * required by DOS (and `FT_MULTIPLE_MASTERS_H` is a lot more meaningful + * than `ftmm.h`). + * + */ + + + /* configuration files */ + + /************************************************************************** + * + * @macro: + * FT_CONFIG_CONFIG_H + * + * @description: + * A macro used in `#include` statements to name the file containing + * FreeType~2 configuration data. + * + */ +#ifndef FT_CONFIG_CONFIG_H +#define FT_CONFIG_CONFIG_H +#endif + + + /************************************************************************** + * + * @macro: + * FT_CONFIG_STANDARD_LIBRARY_H + * + * @description: + * A macro used in `#include` statements to name the file containing + * FreeType~2 interface to the standard C library functions. + * + */ +#ifndef FT_CONFIG_STANDARD_LIBRARY_H +#define FT_CONFIG_STANDARD_LIBRARY_H +#endif + + + /************************************************************************** + * + * @macro: + * FT_CONFIG_OPTIONS_H + * + * @description: + * A macro used in `#include` statements to name the file containing + * FreeType~2 project-specific configuration options. + * + */ +#ifndef FT_CONFIG_OPTIONS_H +#define FT_CONFIG_OPTIONS_H +#endif + + + /************************************************************************** + * + * @macro: + * FT_CONFIG_MODULES_H + * + * @description: + * A macro used in `#include` statements to name the file containing the + * list of FreeType~2 modules that are statically linked to new library + * instances in @FT_Init_FreeType. + * + */ +#ifndef FT_CONFIG_MODULES_H +#define FT_CONFIG_MODULES_H +#endif + + /* */ + + /* public headers */ + + /************************************************************************** + * + * @macro: + * FT_FREETYPE_H + * + * @description: + * A macro used in `#include` statements to name the file containing the + * base FreeType~2 API. + * + */ +#define FT_FREETYPE_H + + + /************************************************************************** + * + * @macro: + * FT_ERRORS_H + * + * @description: + * A macro used in `#include` statements to name the file containing the + * list of FreeType~2 error codes (and messages). + * + * It is included by @FT_FREETYPE_H. + * + */ +#define FT_ERRORS_H + + + /************************************************************************** + * + * @macro: + * FT_MODULE_ERRORS_H + * + * @description: + * A macro used in `#include` statements to name the file containing the + * list of FreeType~2 module error offsets (and messages). + * + */ +#define FT_MODULE_ERRORS_H + + + /************************************************************************** + * + * @macro: + * FT_SYSTEM_H + * + * @description: + * A macro used in `#include` statements to name the file containing the + * FreeType~2 interface to low-level operations (i.e., memory management + * and stream i/o). + * + * It is included by @FT_FREETYPE_H. + * + */ +#define FT_SYSTEM_H + + + /************************************************************************** + * + * @macro: + * FT_IMAGE_H + * + * @description: + * A macro used in `#include` statements to name the file containing type + * definitions related to glyph images (i.e., bitmaps, outlines, + * scan-converter parameters). + * + * It is included by @FT_FREETYPE_H. + * + */ +#define FT_IMAGE_H + + + /************************************************************************** + * + * @macro: + * FT_TYPES_H + * + * @description: + * A macro used in `#include` statements to name the file containing the + * basic data types defined by FreeType~2. + * + * It is included by @FT_FREETYPE_H. + * + */ +#define FT_TYPES_H + + + /************************************************************************** + * + * @macro: + * FT_LIST_H + * + * @description: + * A macro used in `#include` statements to name the file containing the + * list management API of FreeType~2. + * + * (Most applications will never need to include this file.) + * + */ +#define FT_LIST_H + + + /************************************************************************** + * + * @macro: + * FT_OUTLINE_H + * + * @description: + * A macro used in `#include` statements to name the file containing the + * scalable outline management API of FreeType~2. + * + */ +#define FT_OUTLINE_H + + + /************************************************************************** + * + * @macro: + * FT_SIZES_H + * + * @description: + * A macro used in `#include` statements to name the file containing the + * API which manages multiple @FT_Size objects per face. + * + */ +#define FT_SIZES_H + + + /************************************************************************** + * + * @macro: + * FT_MODULE_H + * + * @description: + * A macro used in `#include` statements to name the file containing the + * module management API of FreeType~2. + * + */ +#define FT_MODULE_H + + + /************************************************************************** + * + * @macro: + * FT_RENDER_H + * + * @description: + * A macro used in `#include` statements to name the file containing the + * renderer module management API of FreeType~2. + * + */ +#define FT_RENDER_H + + + /************************************************************************** + * + * @macro: + * FT_DRIVER_H + * + * @description: + * A macro used in `#include` statements to name the file containing + * structures and macros related to the driver modules. + * + */ +#define FT_DRIVER_H + + + /************************************************************************** + * + * @macro: + * FT_AUTOHINTER_H + * + * @description: + * A macro used in `#include` statements to name the file containing + * structures and macros related to the auto-hinting module. + * + * Deprecated since version~2.9; use @FT_DRIVER_H instead. + * + */ +#define FT_AUTOHINTER_H FT_DRIVER_H + + + /************************************************************************** + * + * @macro: + * FT_CFF_DRIVER_H + * + * @description: + * A macro used in `#include` statements to name the file containing + * structures and macros related to the CFF driver module. + * + * Deprecated since version~2.9; use @FT_DRIVER_H instead. + * + */ +#define FT_CFF_DRIVER_H FT_DRIVER_H + + + /************************************************************************** + * + * @macro: + * FT_TRUETYPE_DRIVER_H + * + * @description: + * A macro used in `#include` statements to name the file containing + * structures and macros related to the TrueType driver module. + * + * Deprecated since version~2.9; use @FT_DRIVER_H instead. + * + */ +#define FT_TRUETYPE_DRIVER_H FT_DRIVER_H + + + /************************************************************************** + * + * @macro: + * FT_PCF_DRIVER_H + * + * @description: + * A macro used in `#include` statements to name the file containing + * structures and macros related to the PCF driver module. + * + * Deprecated since version~2.9; use @FT_DRIVER_H instead. + * + */ +#define FT_PCF_DRIVER_H FT_DRIVER_H + + + /************************************************************************** + * + * @macro: + * FT_TYPE1_TABLES_H + * + * @description: + * A macro used in `#include` statements to name the file containing the + * types and API specific to the Type~1 format. + * + */ +#define FT_TYPE1_TABLES_H + + + /************************************************************************** + * + * @macro: + * FT_TRUETYPE_IDS_H + * + * @description: + * A macro used in `#include` statements to name the file containing the + * enumeration values which identify name strings, languages, encodings, + * etc. This file really contains a _large_ set of constant macro + * definitions, taken from the TrueType and OpenType specifications. + * + */ +#define FT_TRUETYPE_IDS_H + + + /************************************************************************** + * + * @macro: + * FT_TRUETYPE_TABLES_H + * + * @description: + * A macro used in `#include` statements to name the file containing the + * types and API specific to the TrueType (as well as OpenType) format. + * + */ +#define FT_TRUETYPE_TABLES_H + + + /************************************************************************** + * + * @macro: + * FT_TRUETYPE_TAGS_H + * + * @description: + * A macro used in `#include` statements to name the file containing the + * definitions of TrueType four-byte 'tags' which identify blocks in + * SFNT-based font formats (i.e., TrueType and OpenType). + * + */ +#define FT_TRUETYPE_TAGS_H + + + /************************************************************************** + * + * @macro: + * FT_BDF_H + * + * @description: + * A macro used in `#include` statements to name the file containing the + * definitions of an API which accesses BDF-specific strings from a face. + * + */ +#define FT_BDF_H + + + /************************************************************************** + * + * @macro: + * FT_CID_H + * + * @description: + * A macro used in `#include` statements to name the file containing the + * definitions of an API which access CID font information from a face. + * + */ +#define FT_CID_H + + + /************************************************************************** + * + * @macro: + * FT_GZIP_H + * + * @description: + * A macro used in `#include` statements to name the file containing the + * definitions of an API which supports gzip-compressed files. + * + */ +#define FT_GZIP_H + + + /************************************************************************** + * + * @macro: + * FT_LZW_H + * + * @description: + * A macro used in `#include` statements to name the file containing the + * definitions of an API which supports LZW-compressed files. + * + */ +#define FT_LZW_H + + + /************************************************************************** + * + * @macro: + * FT_BZIP2_H + * + * @description: + * A macro used in `#include` statements to name the file containing the + * definitions of an API which supports bzip2-compressed files. + * + */ +#define FT_BZIP2_H + + + /************************************************************************** + * + * @macro: + * FT_WINFONTS_H + * + * @description: + * A macro used in `#include` statements to name the file containing the + * definitions of an API which supports Windows FNT files. + * + */ +#define FT_WINFONTS_H + + + /************************************************************************** + * + * @macro: + * FT_GLYPH_H + * + * @description: + * A macro used in `#include` statements to name the file containing the + * API of the optional glyph management component. + * + */ +#define FT_GLYPH_H + + + /************************************************************************** + * + * @macro: + * FT_BITMAP_H + * + * @description: + * A macro used in `#include` statements to name the file containing the + * API of the optional bitmap conversion component. + * + */ +#define FT_BITMAP_H + + + /************************************************************************** + * + * @macro: + * FT_BBOX_H + * + * @description: + * A macro used in `#include` statements to name the file containing the + * API of the optional exact bounding box computation routines. + * + */ +#define FT_BBOX_H + + + /************************************************************************** + * + * @macro: + * FT_CACHE_H + * + * @description: + * A macro used in `#include` statements to name the file containing the + * API of the optional FreeType~2 cache sub-system. + * + */ +#define FT_CACHE_H + + + /************************************************************************** + * + * @macro: + * FT_MAC_H + * + * @description: + * A macro used in `#include` statements to name the file containing the + * Macintosh-specific FreeType~2 API. The latter is used to access fonts + * embedded in resource forks. + * + * This header file must be explicitly included by client applications + * compiled on the Mac (note that the base API still works though). + * + */ +#define FT_MAC_H + + + /************************************************************************** + * + * @macro: + * FT_MULTIPLE_MASTERS_H + * + * @description: + * A macro used in `#include` statements to name the file containing the + * optional multiple-masters management API of FreeType~2. + * + */ +#define FT_MULTIPLE_MASTERS_H + + + /************************************************************************** + * + * @macro: + * FT_SFNT_NAMES_H + * + * @description: + * A macro used in `#include` statements to name the file containing the + * optional FreeType~2 API which accesses embedded 'name' strings in + * SFNT-based font formats (i.e., TrueType and OpenType). + * + */ +#define FT_SFNT_NAMES_H + + + /************************************************************************** + * + * @macro: + * FT_OPENTYPE_VALIDATE_H + * + * @description: + * A macro used in `#include` statements to name the file containing the + * optional FreeType~2 API which validates OpenType tables ('BASE', + * 'GDEF', 'GPOS', 'GSUB', 'JSTF'). + * + */ +#define FT_OPENTYPE_VALIDATE_H + + + /************************************************************************** + * + * @macro: + * FT_GX_VALIDATE_H + * + * @description: + * A macro used in `#include` statements to name the file containing the + * optional FreeType~2 API which validates TrueTypeGX/AAT tables ('feat', + * 'mort', 'morx', 'bsln', 'just', 'kern', 'opbd', 'trak', 'prop'). + * + */ +#define FT_GX_VALIDATE_H + + + /************************************************************************** + * + * @macro: + * FT_PFR_H + * + * @description: + * A macro used in `#include` statements to name the file containing the + * FreeType~2 API which accesses PFR-specific data. + * + */ +#define FT_PFR_H + + + /************************************************************************** + * + * @macro: + * FT_STROKER_H + * + * @description: + * A macro used in `#include` statements to name the file containing the + * FreeType~2 API which provides functions to stroke outline paths. + */ +#define FT_STROKER_H + + + /************************************************************************** + * + * @macro: + * FT_SYNTHESIS_H + * + * @description: + * A macro used in `#include` statements to name the file containing the + * FreeType~2 API which performs artificial obliquing and emboldening. + */ +#define FT_SYNTHESIS_H + + + /************************************************************************** + * + * @macro: + * FT_FONT_FORMATS_H + * + * @description: + * A macro used in `#include` statements to name the file containing the + * FreeType~2 API which provides functions specific to font formats. + */ +#define FT_FONT_FORMATS_H + + /* deprecated */ +#define FT_XFREE86_H FT_FONT_FORMATS_H + + + /************************************************************************** + * + * @macro: + * FT_TRIGONOMETRY_H + * + * @description: + * A macro used in `#include` statements to name the file containing the + * FreeType~2 API which performs trigonometric computations (e.g., + * cosines and arc tangents). + */ +#define FT_TRIGONOMETRY_H + + + /************************************************************************** + * + * @macro: + * FT_LCD_FILTER_H + * + * @description: + * A macro used in `#include` statements to name the file containing the + * FreeType~2 API which performs color filtering for subpixel rendering. + */ +#define FT_LCD_FILTER_H + + + /************************************************************************** + * + * @macro: + * FT_INCREMENTAL_H + * + * @description: + * A macro used in `#include` statements to name the file containing the + * FreeType~2 API which performs incremental glyph loading. + */ +#define FT_INCREMENTAL_H + + + /************************************************************************** + * + * @macro: + * FT_GASP_H + * + * @description: + * A macro used in `#include` statements to name the file containing the + * FreeType~2 API which returns entries from the TrueType GASP table. + */ +#define FT_GASP_H + + + /************************************************************************** + * + * @macro: + * FT_ADVANCES_H + * + * @description: + * A macro used in `#include` statements to name the file containing the + * FreeType~2 API which returns individual and ranged glyph advances. + */ +#define FT_ADVANCES_H + + + /************************************************************************** + * + * @macro: + * FT_COLOR_H + * + * @description: + * A macro used in `#include` statements to name the file containing the + * FreeType~2 API which handles the OpenType 'CPAL' table. + */ +#define FT_COLOR_H + + + /************************************************************************** + * + * @macro: + * FT_OTSVG_H + * + * @description: + * A macro used in `#include` statements to name the file containing the + * FreeType~2 API which handles the OpenType 'SVG~' glyphs. + */ +#define FT_OTSVG_H + + + /* */ + + /* These header files don't need to be included by the user. */ +#define FT_ERROR_DEFINITIONS_H +#define FT_PARAMETER_TAGS_H + + /* Deprecated macros. */ +#define FT_UNPATENTED_HINTING_H +#define FT_TRUETYPE_UNPATENTED_H + + /* `FT_CACHE_H` is the only header file needed for the cache subsystem. */ +#define FT_CACHE_IMAGE_H FT_CACHE_H +#define FT_CACHE_SMALL_BITMAPS_H FT_CACHE_H +#define FT_CACHE_CHARMAP_H FT_CACHE_H + + /* The internals of the cache sub-system are no longer exposed. We */ + /* default to `FT_CACHE_H` at the moment just in case, but we know */ + /* of no rogue client that uses them. */ + /* */ +#define FT_CACHE_MANAGER_H FT_CACHE_H +#define FT_CACHE_INTERNAL_MRU_H FT_CACHE_H +#define FT_CACHE_INTERNAL_MANAGER_H FT_CACHE_H +#define FT_CACHE_INTERNAL_CACHE_H FT_CACHE_H +#define FT_CACHE_INTERNAL_GLYPH_H FT_CACHE_H +#define FT_CACHE_INTERNAL_IMAGE_H FT_CACHE_H +#define FT_CACHE_INTERNAL_SBITS_H FT_CACHE_H + +/* TODO(david): Move this section below to a different header */ +#ifdef FT2_BUILD_LIBRARY +#if defined( _MSC_VER ) /* Visual C++ (and Intel C++) */ + + /* We disable the warning `conditional expression is constant' here */ + /* in order to compile cleanly with the maximum level of warnings. */ + /* In particular, the warning complains about stuff like `while(0)' */ + /* which is very useful in macro definitions. There is no benefit */ + /* in having it enabled. */ +#pragma warning( disable : 4127 ) + +#endif /* _MSC_VER */ +#endif /* FT2_BUILD_LIBRARY */ + +#endif /* FTHEADER_H_ */ + + +/* END */ diff --git a/dependencies/winx64/include/freetype2/freetype/config/ftmodule.h b/dependencies/winx64/include/freetype2/freetype/config/ftmodule.h new file mode 100644 index 0000000..b315bab --- /dev/null +++ b/dependencies/winx64/include/freetype2/freetype/config/ftmodule.h @@ -0,0 +1,33 @@ +/* + * This file registers the FreeType modules compiled into the library. + * + * If you use GNU make, this file IS NOT USED! Instead, it is created in + * the objects directory (normally `/objs/`) based on information + * from `/modules.cfg`. + * + * Please read `docs/INSTALL.ANY` and `docs/CUSTOMIZE` how to compile + * FreeType without GNU make. + * + */ + +FT_USE_MODULE( FT_Module_Class, autofit_module_class ) +FT_USE_MODULE( FT_Driver_ClassRec, tt_driver_class ) +FT_USE_MODULE( FT_Driver_ClassRec, t1_driver_class ) +FT_USE_MODULE( FT_Driver_ClassRec, cff_driver_class ) +FT_USE_MODULE( FT_Driver_ClassRec, t1cid_driver_class ) +FT_USE_MODULE( FT_Driver_ClassRec, pfr_driver_class ) +FT_USE_MODULE( FT_Driver_ClassRec, t42_driver_class ) +FT_USE_MODULE( FT_Driver_ClassRec, winfnt_driver_class ) +FT_USE_MODULE( FT_Driver_ClassRec, pcf_driver_class ) +FT_USE_MODULE( FT_Driver_ClassRec, bdf_driver_class ) +FT_USE_MODULE( FT_Module_Class, psaux_module_class ) +FT_USE_MODULE( FT_Module_Class, psnames_module_class ) +FT_USE_MODULE( FT_Module_Class, pshinter_module_class ) +FT_USE_MODULE( FT_Module_Class, sfnt_module_class ) +FT_USE_MODULE( FT_Renderer_Class, ft_smooth_renderer_class ) +FT_USE_MODULE( FT_Renderer_Class, ft_raster1_renderer_class ) +FT_USE_MODULE( FT_Renderer_Class, ft_sdf_renderer_class ) +FT_USE_MODULE( FT_Renderer_Class, ft_bitmap_sdf_renderer_class ) +FT_USE_MODULE( FT_Renderer_Class, ft_svg_renderer_class ) + +/* EOF */ diff --git a/dependencies/winx64/include/freetype2/freetype/config/ftoption.h b/dependencies/winx64/include/freetype2/freetype/config/ftoption.h new file mode 100644 index 0000000..9cc5488 --- /dev/null +++ b/dependencies/winx64/include/freetype2/freetype/config/ftoption.h @@ -0,0 +1,1055 @@ +/**************************************************************************** + * + * ftoption.h + * + * User-selectable configuration macros (specification only). + * + * Copyright (C) 1996-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + +#ifndef FTOPTION_H_ +#define FTOPTION_H_ + + +#include + + +FT_BEGIN_HEADER + + /************************************************************************** + * + * USER-SELECTABLE CONFIGURATION MACROS + * + * This file contains the default configuration macro definitions for a + * standard build of the FreeType library. There are three ways to use + * this file to build project-specific versions of the library: + * + * - You can modify this file by hand, but this is not recommended in + * cases where you would like to build several versions of the library + * from a single source directory. + * + * - You can put a copy of this file in your build directory, more + * precisely in `$BUILD/freetype/config/ftoption.h`, where `$BUILD` is + * the name of a directory that is included _before_ the FreeType include + * path during compilation. + * + * The default FreeType Makefiles use the build directory + * `builds/` by default, but you can easily change that for your + * own projects. + * + * - Copy the file to `$BUILD/ft2build.h` and modify it + * slightly to pre-define the macro `FT_CONFIG_OPTIONS_H` used to locate + * this file during the build. For example, + * + * ``` + * #define FT_CONFIG_OPTIONS_H + * #include + * ``` + * + * will use `$BUILD/myftoptions.h` instead of this file for macro + * definitions. + * + * Note also that you can similarly pre-define the macro + * `FT_CONFIG_MODULES_H` used to locate the file listing of the modules + * that are statically linked to the library at compile time. By + * default, this file is ``. + * + * We highly recommend using the third method whenever possible. + * + */ + + + /*************************************************************************/ + /*************************************************************************/ + /**** ****/ + /**** G E N E R A L F R E E T Y P E 2 C O N F I G U R A T I O N ****/ + /**** ****/ + /*************************************************************************/ + /*************************************************************************/ + + + /*#************************************************************************ + * + * If you enable this configuration option, FreeType recognizes an + * environment variable called `FREETYPE_PROPERTIES`, which can be used to + * control the various font drivers and modules. The controllable + * properties are listed in the section @properties. + * + * You have to undefine this configuration option on platforms that lack + * the concept of environment variables (and thus don't have the `getenv` + * function), for example Windows CE. + * + * `FREETYPE_PROPERTIES` has the following syntax form (broken here into + * multiple lines for better readability). + * + * ``` + * + * ':' + * '=' + * + * ':' + * '=' + * ... + * ``` + * + * Example: + * + * ``` + * FREETYPE_PROPERTIES=truetype:interpreter-version=35 \ + * cff:no-stem-darkening=1 + * ``` + * + */ +#define FT_CONFIG_OPTION_ENVIRONMENT_PROPERTIES + + + /************************************************************************** + * + * Uncomment the line below if you want to activate LCD rendering + * technology similar to ClearType in this build of the library. This + * technology triples the resolution in the direction color subpixels. To + * mitigate color fringes inherent to this technology, you also need to + * explicitly set up LCD filtering. + * + * When this macro is not defined, FreeType offers alternative LCD + * rendering technology that produces excellent output. + */ +/* #define FT_CONFIG_OPTION_SUBPIXEL_RENDERING */ + + + /************************************************************************** + * + * Many compilers provide a non-ANSI 64-bit data type that can be used by + * FreeType to speed up some computations. However, this will create some + * problems when compiling the library in strict ANSI mode. + * + * For this reason, the use of 64-bit integers is normally disabled when + * the `__STDC__` macro is defined. You can however disable this by + * defining the macro `FT_CONFIG_OPTION_FORCE_INT64` here. + * + * For most compilers, this will only create compilation warnings when + * building the library. + * + * ObNote: The compiler-specific 64-bit integers are detected in the + * file `ftconfig.h` either statically or through the `configure` + * script on supported platforms. + */ +#undef FT_CONFIG_OPTION_FORCE_INT64 + + + /************************************************************************** + * + * If this macro is defined, do not try to use an assembler version of + * performance-critical functions (e.g., @FT_MulFix). You should only do + * that to verify that the assembler function works properly, or to execute + * benchmark tests of the various implementations. + */ +/* #define FT_CONFIG_OPTION_NO_ASSEMBLER */ + + + /************************************************************************** + * + * If this macro is defined, try to use an inlined assembler version of the + * @FT_MulFix function, which is a 'hotspot' when loading and hinting + * glyphs, and which should be executed as fast as possible. + * + * Note that if your compiler or CPU is not supported, this will default to + * the standard and portable implementation found in `ftcalc.c`. + */ +#define FT_CONFIG_OPTION_INLINE_MULFIX + + + /************************************************************************** + * + * LZW-compressed file support. + * + * FreeType now handles font files that have been compressed with the + * `compress` program. This is mostly used to parse many of the PCF + * files that come with various X11 distributions. The implementation + * uses NetBSD's `zopen` to partially uncompress the file on the fly (see + * `src/lzw/ftgzip.c`). + * + * Define this macro if you want to enable this 'feature'. + */ +#define FT_CONFIG_OPTION_USE_LZW + + + /************************************************************************** + * + * Gzip-compressed file support. + * + * FreeType now handles font files that have been compressed with the + * `gzip` program. This is mostly used to parse many of the PCF files + * that come with XFree86. The implementation uses 'zlib' to partially + * uncompress the file on the fly (see `src/gzip/ftgzip.c`). + * + * Define this macro if you want to enable this 'feature'. See also the + * macro `FT_CONFIG_OPTION_SYSTEM_ZLIB` below. + */ +#define FT_CONFIG_OPTION_USE_ZLIB + + + /************************************************************************** + * + * ZLib library selection + * + * This macro is only used when `FT_CONFIG_OPTION_USE_ZLIB` is defined. + * It allows FreeType's 'ftgzip' component to link to the system's + * installation of the ZLib library. This is useful on systems like + * Unix or VMS where it generally is already available. + * + * If you let it undefined, the component will use its own copy of the + * zlib sources instead. These have been modified to be included + * directly within the component and **not** export external function + * names. This allows you to link any program with FreeType _and_ ZLib + * without linking conflicts. + * + * Do not `#undef` this macro here since the build system might define + * it for certain configurations only. + * + * If you use a build system like cmake or the `configure` script, + * options set by those programs have precedence, overwriting the value + * here with the configured one. + * + * If you use the GNU make build system directly (that is, without the + * `configure` script) and you define this macro, you also have to pass + * `SYSTEM_ZLIB=yes` as an argument to make. + */ +#define FT_CONFIG_OPTION_SYSTEM_ZLIB + + + /************************************************************************** + * + * Bzip2-compressed file support. + * + * FreeType now handles font files that have been compressed with the + * `bzip2` program. This is mostly used to parse many of the PCF files + * that come with XFree86. The implementation uses `libbz2` to partially + * uncompress the file on the fly (see `src/bzip2/ftbzip2.c`). Contrary + * to gzip, bzip2 currently is not included and need to use the system + * available bzip2 implementation. + * + * Define this macro if you want to enable this 'feature'. + * + * If you use a build system like cmake or the `configure` script, + * options set by those programs have precedence, overwriting the value + * here with the configured one. + */ +#define FT_CONFIG_OPTION_USE_BZIP2 + + + /************************************************************************** + * + * Define to disable the use of file stream functions and types, `FILE`, + * `fopen`, etc. Enables the use of smaller system libraries on embedded + * systems that have multiple system libraries, some with or without file + * stream support, in the cases where file stream support is not necessary + * such as memory loading of font files. + */ +/* #define FT_CONFIG_OPTION_DISABLE_STREAM_SUPPORT */ + + + /************************************************************************** + * + * PNG bitmap support. + * + * FreeType now handles loading color bitmap glyphs in the PNG format. + * This requires help from the external libpng library. Uncompressed + * color bitmaps do not need any external libraries and will be supported + * regardless of this configuration. + * + * Define this macro if you want to enable this 'feature'. + * + * If you use a build system like cmake or the `configure` script, + * options set by those programs have precedence, overwriting the value + * here with the configured one. + */ +#define FT_CONFIG_OPTION_USE_PNG + + + /************************************************************************** + * + * HarfBuzz support. + * + * FreeType uses the HarfBuzz library to improve auto-hinting of OpenType + * fonts. If available, many glyphs not directly addressable by a font's + * character map will be hinted also. + * + * Define this macro if you want to enable this 'feature'. + * + * If you use a build system like cmake or the `configure` script, + * options set by those programs have precedence, overwriting the value + * here with the configured one. + */ +#define FT_CONFIG_OPTION_USE_HARFBUZZ + + + /************************************************************************** + * + * HarfBuzz dynamic support. + * + * Define this macro if you want the HarfBuzz library to be loaded at + * runtime instead of being linked to FreeType. + * + * This option has no effect if `FT_CONFIG_OPTION_USE_HARFBUZZ` is not + * defined. + * + * When this option is enabled, FreeType will try to load the HarfBuzz + * library at runtime, using `dlopen` or `LoadLibrary`, depending on the + * platform. On Microsoft platforms, the library name looked up is + * `libharfbuzz-0.dll`. On Apple platforms, the library name looked up + * is `libharfbuzz.0.dylib`. On all other platforms, the library name + * looked up is `libharfbuzz.so.0`. This name can be overridden by + * defining the macro `FT_LIBHARFBUZZ` at FreeType compilation time. + * + * If you use a build system like cmake or the `configure` script, + * options set by those programs have precedence, overwriting the value + * here with the configured one. + */ +#define FT_CONFIG_OPTION_USE_HARFBUZZ_DYNAMIC + + + /************************************************************************** + * + * Brotli support. + * + * FreeType uses the Brotli library to provide support for decompressing + * WOFF2 streams. + * + * Define this macro if you want to enable this 'feature'. + * + * If you use a build system like cmake or the `configure` script, + * options set by those programs have precedence, overwriting the value + * here with the configured one. + */ +#define FT_CONFIG_OPTION_USE_BROTLI + + + /************************************************************************** + * + * Glyph Postscript Names handling + * + * By default, FreeType 2 is compiled with the 'psnames' module. This + * module is in charge of converting a glyph name string into a Unicode + * value, or return a Macintosh standard glyph name for the use with the + * TrueType 'post' table. + * + * Undefine this macro if you do not want 'psnames' compiled in your + * build of FreeType. This has the following effects: + * + * - The TrueType driver will provide its own set of glyph names, if you + * build it to support postscript names in the TrueType 'post' table, + * but will not synthesize a missing Unicode charmap. + * + * - The Type~1 driver will not be able to synthesize a Unicode charmap + * out of the glyphs found in the fonts. + * + * You would normally undefine this configuration macro when building a + * version of FreeType that doesn't contain a Type~1 or CFF driver. + */ +#define FT_CONFIG_OPTION_POSTSCRIPT_NAMES + + + /************************************************************************** + * + * Postscript Names to Unicode Values support + * + * By default, FreeType~2 is built with the 'psnames' module compiled in. + * Among other things, the module is used to convert a glyph name into a + * Unicode value. This is especially useful in order to synthesize on + * the fly a Unicode charmap from the CFF/Type~1 driver through a big + * table named the 'Adobe Glyph List' (AGL). + * + * Undefine this macro if you do not want the Adobe Glyph List compiled + * in your 'psnames' module. The Type~1 driver will not be able to + * synthesize a Unicode charmap out of the glyphs found in the fonts. + */ +#define FT_CONFIG_OPTION_ADOBE_GLYPH_LIST + + + /************************************************************************** + * + * Support for Mac fonts + * + * Define this macro if you want support for outline fonts in Mac format + * (mac dfont, mac resource, macbinary containing a mac resource) on + * non-Mac platforms. + * + * Note that the 'FOND' resource isn't checked. + */ +#define FT_CONFIG_OPTION_MAC_FONTS + + + /************************************************************************** + * + * Guessing methods to access embedded resource forks + * + * Enable extra Mac fonts support on non-Mac platforms (e.g., GNU/Linux). + * + * Resource forks which include fonts data are stored sometimes in + * locations which users or developers don't expected. In some cases, + * resource forks start with some offset from the head of a file. In + * other cases, the actual resource fork is stored in file different from + * what the user specifies. If this option is activated, FreeType tries + * to guess whether such offsets or different file names must be used. + * + * Note that normal, direct access of resource forks is controlled via + * the `FT_CONFIG_OPTION_MAC_FONTS` option. + */ +#ifdef FT_CONFIG_OPTION_MAC_FONTS +#define FT_CONFIG_OPTION_GUESSING_EMBEDDED_RFORK +#endif + + + /************************************************************************** + * + * Allow the use of `FT_Incremental_Interface` to load typefaces that + * contain no glyph data, but supply it via a callback function. This is + * required by clients supporting document formats which supply font data + * incrementally as the document is parsed, such as the Ghostscript + * interpreter for the PostScript language. + */ +#define FT_CONFIG_OPTION_INCREMENTAL + + + /************************************************************************** + * + * The size in bytes of the render pool used by the scan-line converter to + * do all of its work. + */ +#define FT_RENDER_POOL_SIZE 16384L + + + /************************************************************************** + * + * FT_MAX_MODULES + * + * The maximum number of modules that can be registered in a single + * FreeType library object. 32~is the default. + */ +#define FT_MAX_MODULES 32 + + + /************************************************************************** + * + * Debug level + * + * FreeType can be compiled in debug or trace mode. In debug mode, + * errors are reported through the 'ftdebug' component. In trace mode, + * additional messages are sent to the standard output during execution. + * + * Define `FT_DEBUG_LEVEL_ERROR` to build the library in debug mode. + * Define `FT_DEBUG_LEVEL_TRACE` to build it in trace mode. + * + * Don't define any of these macros to compile in 'release' mode! + * + * Do not `#undef` these macros here since the build system might define + * them for certain configurations only. + */ +/* #define FT_DEBUG_LEVEL_ERROR */ +/* #define FT_DEBUG_LEVEL_TRACE */ + + + /************************************************************************** + * + * Logging + * + * Compiling FreeType in debug or trace mode makes FreeType write error + * and trace log messages to `stderr`. Enabling this macro + * automatically forces the `FT_DEBUG_LEVEL_ERROR` and + * `FT_DEBUG_LEVEL_TRACE` macros and allows FreeType to write error and + * trace log messages to a file instead of `stderr`. For writing logs + * to a file, FreeType uses an the external `dlg` library (the source + * code is in `src/dlg`). + * + * This option needs a C99 compiler. + */ +/* #define FT_DEBUG_LOGGING */ + + + /************************************************************************** + * + * Autofitter debugging + * + * If `FT_DEBUG_AUTOFIT` is defined, FreeType provides some means to + * control the autofitter behaviour for debugging purposes with global + * boolean variables (consequently, you should **never** enable this + * while compiling in 'release' mode): + * + * ``` + * af_debug_disable_horz_hints_ + * af_debug_disable_vert_hints_ + * af_debug_disable_blue_hints_ + * ``` + * + * Additionally, the following functions provide dumps of various + * internal autofit structures to stdout (using `printf`): + * + * ``` + * af_glyph_hints_dump_points + * af_glyph_hints_dump_segments + * af_glyph_hints_dump_edges + * af_glyph_hints_get_num_segments + * af_glyph_hints_get_segment_offset + * ``` + * + * As an argument, they use another global variable: + * + * ``` + * af_debug_hints_ + * ``` + * + * Please have a look at the `ftgrid` demo program to see how those + * variables and macros should be used. + * + * Do not `#undef` these macros here since the build system might define + * them for certain configurations only. + */ +/* #define FT_DEBUG_AUTOFIT */ + + + /************************************************************************** + * + * Memory Debugging + * + * FreeType now comes with an integrated memory debugger that is capable + * of detecting simple errors like memory leaks or double deletes. To + * compile it within your build of the library, you should define + * `FT_DEBUG_MEMORY` here. + * + * Note that the memory debugger is only activated at runtime when when + * the _environment_ variable `FT2_DEBUG_MEMORY` is defined also! + * + * Do not `#undef` this macro here since the build system might define it + * for certain configurations only. + */ +/* #define FT_DEBUG_MEMORY */ + + + /************************************************************************** + * + * Module errors + * + * If this macro is set (which is _not_ the default), the higher byte of + * an error code gives the module in which the error has occurred, while + * the lower byte is the real error code. + * + * Setting this macro makes sense for debugging purposes only, since it + * would break source compatibility of certain programs that use + * FreeType~2. + * + * More details can be found in the files `ftmoderr.h` and `fterrors.h`. + */ +#undef FT_CONFIG_OPTION_USE_MODULE_ERRORS + + + /************************************************************************** + * + * OpenType SVG Glyph Support + * + * Setting this macro enables support for OpenType SVG glyphs. By + * default, FreeType can only fetch SVG documents. However, it can also + * render them if external rendering hook functions are plugged in at + * runtime. + * + * More details on the hooks can be found in file `otsvg.h`. + */ +#define FT_CONFIG_OPTION_SVG + + + /************************************************************************** + * + * Error Strings + * + * If this macro is set, `FT_Error_String` will return meaningful + * descriptions. This is not enabled by default to reduce the overall + * size of FreeType. + * + * More details can be found in the file `fterrors.h`. + */ +/* #define FT_CONFIG_OPTION_ERROR_STRINGS */ + + + /*************************************************************************/ + /*************************************************************************/ + /**** ****/ + /**** S F N T D R I V E R C O N F I G U R A T I O N ****/ + /**** ****/ + /*************************************************************************/ + /*************************************************************************/ + + + /************************************************************************** + * + * Define `TT_CONFIG_OPTION_EMBEDDED_BITMAPS` if you want to support + * embedded bitmaps in all formats using the 'sfnt' module (namely + * TrueType~& OpenType). + */ +#define TT_CONFIG_OPTION_EMBEDDED_BITMAPS + + + /************************************************************************** + * + * Define `TT_CONFIG_OPTION_COLOR_LAYERS` if you want to support colored + * outlines (from the 'COLR'/'CPAL' tables) in all formats using the 'sfnt' + * module (namely TrueType~& OpenType). + */ +#define TT_CONFIG_OPTION_COLOR_LAYERS + + + /************************************************************************** + * + * Define `TT_CONFIG_OPTION_POSTSCRIPT_NAMES` if you want to be able to + * load and enumerate Postscript names of glyphs in a TrueType or OpenType + * file. + * + * Note that if you do not compile the 'psnames' module by undefining the + * above `FT_CONFIG_OPTION_POSTSCRIPT_NAMES` macro, the 'sfnt' module will + * contain additional code to read the PostScript name table from a font. + * + * (By default, the module uses 'psnames' to extract glyph names.) + */ +#define TT_CONFIG_OPTION_POSTSCRIPT_NAMES + + + /************************************************************************** + * + * Define `TT_CONFIG_OPTION_SFNT_NAMES` if your applications need to access + * the internal name table in a SFNT-based format like TrueType or + * OpenType. The name table contains various strings used to describe the + * font, like family name, copyright, version, etc. It does not contain + * any glyph name though. + * + * Accessing SFNT names is done through the functions declared in + * `ftsnames.h`. + */ +#define TT_CONFIG_OPTION_SFNT_NAMES + + + /************************************************************************** + * + * TrueType CMap support + * + * Here you can fine-tune which TrueType CMap table format shall be + * supported. + */ +#define TT_CONFIG_CMAP_FORMAT_0 +#define TT_CONFIG_CMAP_FORMAT_2 +#define TT_CONFIG_CMAP_FORMAT_4 +#define TT_CONFIG_CMAP_FORMAT_6 +#define TT_CONFIG_CMAP_FORMAT_8 +#define TT_CONFIG_CMAP_FORMAT_10 +#define TT_CONFIG_CMAP_FORMAT_12 +#define TT_CONFIG_CMAP_FORMAT_13 +#define TT_CONFIG_CMAP_FORMAT_14 + + + /*************************************************************************/ + /*************************************************************************/ + /**** ****/ + /**** T R U E T Y P E D R I V E R C O N F I G U R A T I O N ****/ + /**** ****/ + /*************************************************************************/ + /*************************************************************************/ + + /************************************************************************** + * + * Define `TT_CONFIG_OPTION_BYTECODE_INTERPRETER` if you want to compile a + * bytecode interpreter in the TrueType driver. + * + * By undefining this, you will only compile the code necessary to load + * TrueType glyphs without hinting. + * + * Do not `#undef` this macro here, since the build system might define it + * for certain configurations only. + */ +#define TT_CONFIG_OPTION_BYTECODE_INTERPRETER + + + /************************************************************************** + * + * Define `TT_CONFIG_OPTION_SUBPIXEL_HINTING` if you want to compile + * subpixel hinting support into the TrueType driver. This modifies the + * TrueType hinting mechanism when anything but `FT_RENDER_MODE_MONO` is + * requested. + * + * In particular, it modifies the bytecode interpreter to interpret (or + * not) instructions in a certain way so that all TrueType fonts look like + * they do in a Windows ClearType (DirectWrite) environment. See [1] for a + * technical overview on what this means. See `ttinterp.h` for more + * details on this option. + * + * The new default mode focuses on applying a minimal set of rules to all + * fonts indiscriminately so that modern and web fonts render well while + * legacy fonts render okay. The corresponding interpreter version is v40. + * The so-called Infinality mode (v38) is no longer available in FreeType. + * + * By undefining these, you get rendering behavior like on Windows without + * ClearType, i.e., Windows XP without ClearType enabled and Win9x + * (interpreter version v35). Or not, depending on how much hinting blood + * and testing tears the font designer put into a given font. If you + * define one or both subpixel hinting options, you can switch between + * between v35 and the ones you define (using `FT_Property_Set`). + * + * This option requires `TT_CONFIG_OPTION_BYTECODE_INTERPRETER` to be + * defined. + * + * [1] + * https://learn.microsoft.com/typography/cleartype/truetypecleartype + */ +#define TT_CONFIG_OPTION_SUBPIXEL_HINTING + + + /************************************************************************** + * + * Define `TT_CONFIG_OPTION_COMPONENT_OFFSET_SCALED` to compile the + * TrueType glyph loader to use Apple's definition of how to handle + * component offsets in composite glyphs. + * + * Apple and MS disagree on the default behavior of component offsets in + * composites. Apple says that they should be scaled by the scaling + * factors in the transformation matrix (roughly, it's more complex) while + * MS says they should not. OpenType defines two bits in the composite + * flags array which can be used to disambiguate, but old fonts will not + * have them. + * + * https://learn.microsoft.com/typography/opentype/spec/glyf + * https://developer.apple.com/fonts/TrueType-Reference-Manual/RM06/Chap6glyf.html + */ +#undef TT_CONFIG_OPTION_COMPONENT_OFFSET_SCALED + + + /************************************************************************** + * + * Define `TT_CONFIG_OPTION_GX_VAR_SUPPORT` if you want to include support + * for Apple's distortable font technology ('fvar', 'gvar', 'cvar', and + * 'avar' tables). Tagged 'Font Variations', this is now part of OpenType + * also. This has many similarities to Type~1 Multiple Masters support. + */ +#define TT_CONFIG_OPTION_GX_VAR_SUPPORT + + + /************************************************************************** + * + * Define `TT_CONFIG_OPTION_NO_BORING_EXPANSION` if you want to exclude + * support for 'boring' OpenType specification expansions. + * + * https://github.com/harfbuzz/boring-expansion-spec + * + * Right now, the following features are covered: + * + * - 'avar' version 2.0 + * + * Most likely, this is a temporary configuration option to be removed in + * the near future, since it is assumed that eventually those features are + * added to the OpenType standard. + */ +/* #define TT_CONFIG_OPTION_NO_BORING_EXPANSION */ + + + /************************************************************************** + * + * Define `TT_CONFIG_OPTION_BDF` if you want to include support for an + * embedded 'BDF~' table within SFNT-based bitmap formats. + */ +#define TT_CONFIG_OPTION_BDF + + + /************************************************************************** + * + * Option `TT_CONFIG_OPTION_MAX_RUNNABLE_OPCODES` controls the maximum + * number of bytecode instructions executed for a single run of the + * bytecode interpreter, needed to prevent infinite loops. You don't want + * to change this except for very special situations (e.g., making a + * library fuzzer spend less time to handle broken fonts). + * + * It is not expected that this value is ever modified by a configuring + * script; instead, it gets surrounded with `#ifndef ... #endif` so that + * the value can be set as a preprocessor option on the compiler's command + * line. + */ +#ifndef TT_CONFIG_OPTION_MAX_RUNNABLE_OPCODES +#define TT_CONFIG_OPTION_MAX_RUNNABLE_OPCODES 1000000L +#endif + + + /************************************************************************** + * + * Option `TT_CONFIG_OPTION_GPOS_KERNING` enables a basic GPOS kerning + * implementation (for TrueType fonts only). With this defined, FreeType + * is able to get kerning pair data from the GPOS 'kern' feature as well as + * legacy 'kern' tables; without this defined, FreeType will only be able + * to use legacy 'kern' tables. + * + * Note that FreeType does not support more advanced GPOS layout features; + * even the 'kern' feature implemented here doesn't handle more + * sophisticated kerning variants. Use a higher-level library like + * HarfBuzz instead for that. + */ +/* #define TT_CONFIG_OPTION_GPOS_KERNING */ + + + /*************************************************************************/ + /*************************************************************************/ + /**** ****/ + /**** T Y P E 1 D R I V E R C O N F I G U R A T I O N ****/ + /**** ****/ + /*************************************************************************/ + /*************************************************************************/ + + + /************************************************************************** + * + * `T1_MAX_DICT_DEPTH` is the maximum depth of nest dictionaries and arrays + * in the Type~1 stream (see `t1load.c`). A minimum of~4 is required. + */ +#define T1_MAX_DICT_DEPTH 5 + + + /************************************************************************** + * + * `T1_MAX_SUBRS_CALLS` details the maximum number of nested sub-routine + * calls during glyph loading. + */ +#define T1_MAX_SUBRS_CALLS 16 + + + /************************************************************************** + * + * `T1_MAX_CHARSTRING_OPERANDS` is the charstring stack's capacity. A + * minimum of~16 is required. + * + * The Chinese font 'MingTiEG-Medium' (covering the CNS 11643 character + * set) needs 256. + */ +#define T1_MAX_CHARSTRINGS_OPERANDS 256 + + + /************************************************************************** + * + * Define this configuration macro if you want to prevent the compilation + * of the 't1afm' module, which is in charge of reading Type~1 AFM files + * into an existing face. Note that if set, the Type~1 driver will be + * unable to produce kerning distances. + */ +#undef T1_CONFIG_OPTION_NO_AFM + + + /************************************************************************** + * + * Define this configuration macro if you want to prevent the compilation + * of the Multiple Masters font support in the Type~1 driver. + */ +#undef T1_CONFIG_OPTION_NO_MM_SUPPORT + + + /************************************************************************** + * + * `T1_CONFIG_OPTION_OLD_ENGINE` controls whether the pre-Adobe Type~1 + * engine gets compiled into FreeType. If defined, it is possible to + * switch between the two engines using the `hinting-engine` property of + * the 'type1' driver module. + */ +/* #define T1_CONFIG_OPTION_OLD_ENGINE */ + + + /*************************************************************************/ + /*************************************************************************/ + /**** ****/ + /**** C F F D R I V E R C O N F I G U R A T I O N ****/ + /**** ****/ + /*************************************************************************/ + /*************************************************************************/ + + + /************************************************************************** + * + * Using `CFF_CONFIG_OPTION_DARKENING_PARAMETER_{X,Y}{1,2,3,4}` it is + * possible to set up the default values of the four control points that + * define the stem darkening behaviour of the (new) CFF engine. For more + * details please read the documentation of the `darkening-parameters` + * property (file `ftdriver.h`), which allows the control at run-time. + * + * Do **not** undefine these macros! + */ +#define CFF_CONFIG_OPTION_DARKENING_PARAMETER_X1 500 +#define CFF_CONFIG_OPTION_DARKENING_PARAMETER_Y1 400 + +#define CFF_CONFIG_OPTION_DARKENING_PARAMETER_X2 1000 +#define CFF_CONFIG_OPTION_DARKENING_PARAMETER_Y2 275 + +#define CFF_CONFIG_OPTION_DARKENING_PARAMETER_X3 1667 +#define CFF_CONFIG_OPTION_DARKENING_PARAMETER_Y3 275 + +#define CFF_CONFIG_OPTION_DARKENING_PARAMETER_X4 2333 +#define CFF_CONFIG_OPTION_DARKENING_PARAMETER_Y4 0 + + + /************************************************************************** + * + * `CFF_CONFIG_OPTION_OLD_ENGINE` controls whether the pre-Adobe CFF engine + * gets compiled into FreeType. If defined, it is possible to switch + * between the two engines using the `hinting-engine` property of the 'cff' + * driver module. + */ +/* #define CFF_CONFIG_OPTION_OLD_ENGINE */ + + + /*************************************************************************/ + /*************************************************************************/ + /**** ****/ + /**** P C F D R I V E R C O N F I G U R A T I O N ****/ + /**** ****/ + /*************************************************************************/ + /*************************************************************************/ + + + /************************************************************************** + * + * There are many PCF fonts just called 'Fixed' which look completely + * different, and which have nothing to do with each other. When selecting + * 'Fixed' in KDE or Gnome one gets results that appear rather random, the + * style changes often if one changes the size and one cannot select some + * fonts at all. This option makes the 'pcf' module prepend the foundry + * name (plus a space) to the family name. + * + * We also check whether we have 'wide' characters; all put together, we + * get family names like 'Sony Fixed' or 'Misc Fixed Wide'. + * + * If this option is activated, it can be controlled with the + * `no-long-family-names` property of the 'pcf' driver module. + */ +/* #define PCF_CONFIG_OPTION_LONG_FAMILY_NAMES */ + + + /*************************************************************************/ + /*************************************************************************/ + /**** ****/ + /**** A U T O F I T M O D U L E C O N F I G U R A T I O N ****/ + /**** ****/ + /*************************************************************************/ + /*************************************************************************/ + + + /************************************************************************** + * + * Compile 'autofit' module with CJK (Chinese, Japanese, Korean) script + * support. + */ +#define AF_CONFIG_OPTION_CJK + + + /************************************************************************** + * + * Compile 'autofit' module with fallback Indic script support, covering + * some scripts that the 'latin' submodule of the 'autofit' module doesn't + * (yet) handle. Currently, this needs option `AF_CONFIG_OPTION_CJK`. + */ +#ifdef AF_CONFIG_OPTION_CJK +#define AF_CONFIG_OPTION_INDIC +#endif + + + /************************************************************************** + * + * Use TrueType-like size metrics for 'light' auto-hinting. + * + * It is strongly recommended to avoid this option, which exists only to + * help some legacy applications retain its appearance and behaviour with + * respect to auto-hinted TrueType fonts. + * + * The very reason this option exists at all are GNU/Linux distributions + * like Fedora that did not un-patch the following change (which was + * present in FreeType between versions 2.4.6 and 2.7.1, inclusive). + * + * ``` + * 2011-07-16 Steven Chu + * + * [truetype] Fix metrics on size request for scalable fonts. + * ``` + * + * This problematic commit is now reverted (more or less). + */ +/* #define AF_CONFIG_OPTION_TT_SIZE_METRICS */ + + /* */ + + + /* + * This macro is obsolete. Support has been removed in FreeType version + * 2.5. + */ +/* #define FT_CONFIG_OPTION_OLD_INTERNALS */ + + + /* + * The next two macros are defined if native TrueType hinting is + * requested by the definitions above. Don't change this. + */ +#ifdef TT_CONFIG_OPTION_BYTECODE_INTERPRETER +#define TT_USE_BYTECODE_INTERPRETER +#ifdef TT_CONFIG_OPTION_SUBPIXEL_HINTING +#define TT_SUPPORT_SUBPIXEL_HINTING_MINIMAL +#endif +#endif + + + /* + * The TT_SUPPORT_COLRV1 macro is defined to indicate to clients that this + * version of FreeType has support for 'COLR' v1 API. This definition is + * useful to FreeType clients that want to build in support for 'COLR' v1 + * depending on a tip-of-tree checkout before it is officially released in + * FreeType, and while the feature cannot yet be tested against using + * version macros. Don't change this macro. This may be removed once the + * feature is in a FreeType release version and version macros can be used + * to test for availability. + */ +#ifdef TT_CONFIG_OPTION_COLOR_LAYERS +#define TT_SUPPORT_COLRV1 +#endif + + + /* + * Check CFF darkening parameters. The checks are the same as in function + * `cff_property_set` in file `cffdrivr.c`. + */ +#if CFF_CONFIG_OPTION_DARKENING_PARAMETER_X1 < 0 || \ + CFF_CONFIG_OPTION_DARKENING_PARAMETER_X2 < 0 || \ + CFF_CONFIG_OPTION_DARKENING_PARAMETER_X3 < 0 || \ + CFF_CONFIG_OPTION_DARKENING_PARAMETER_X4 < 0 || \ + \ + CFF_CONFIG_OPTION_DARKENING_PARAMETER_Y1 < 0 || \ + CFF_CONFIG_OPTION_DARKENING_PARAMETER_Y2 < 0 || \ + CFF_CONFIG_OPTION_DARKENING_PARAMETER_Y3 < 0 || \ + CFF_CONFIG_OPTION_DARKENING_PARAMETER_Y4 < 0 || \ + \ + CFF_CONFIG_OPTION_DARKENING_PARAMETER_X1 > \ + CFF_CONFIG_OPTION_DARKENING_PARAMETER_X2 || \ + CFF_CONFIG_OPTION_DARKENING_PARAMETER_X2 > \ + CFF_CONFIG_OPTION_DARKENING_PARAMETER_X3 || \ + CFF_CONFIG_OPTION_DARKENING_PARAMETER_X3 > \ + CFF_CONFIG_OPTION_DARKENING_PARAMETER_X4 || \ + \ + CFF_CONFIG_OPTION_DARKENING_PARAMETER_Y1 > 500 || \ + CFF_CONFIG_OPTION_DARKENING_PARAMETER_Y2 > 500 || \ + CFF_CONFIG_OPTION_DARKENING_PARAMETER_Y3 > 500 || \ + CFF_CONFIG_OPTION_DARKENING_PARAMETER_Y4 > 500 +#error "Invalid CFF darkening parameters!" +#endif + + +FT_END_HEADER + +#endif /* FTOPTION_H_ */ + + +/* END */ diff --git a/dependencies/winx64/include/freetype2/freetype/config/ftstdlib.h b/dependencies/winx64/include/freetype2/freetype/config/ftstdlib.h new file mode 100644 index 0000000..e17aa7b --- /dev/null +++ b/dependencies/winx64/include/freetype2/freetype/config/ftstdlib.h @@ -0,0 +1,185 @@ +/**************************************************************************** + * + * ftstdlib.h + * + * ANSI-specific library and header configuration file (specification + * only). + * + * Copyright (C) 2002-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + + /************************************************************************** + * + * This file is used to group all `#includes` to the ANSI~C library that + * FreeType normally requires. It also defines macros to rename the + * standard functions within the FreeType source code. + * + * Load a file which defines `FTSTDLIB_H_` before this one to override it. + * + */ + + +#ifndef FTSTDLIB_H_ +#define FTSTDLIB_H_ + + +#include + +#define ft_ptrdiff_t ptrdiff_t + + + /************************************************************************** + * + * integer limits + * + * `UINT_MAX` and `ULONG_MAX` are used to automatically compute the size of + * `int` and `long` in bytes at compile-time. So far, this works for all + * platforms the library has been tested on. We also check `ULLONG_MAX` + * to see whether we can use 64-bit `long long` later on. + * + * Note that on the extremely rare platforms that do not provide integer + * types that are _exactly_ 16 and 32~bits wide (e.g., some old Crays where + * `int` is 36~bits), we do not make any guarantee about the correct + * behaviour of FreeType~2 with all fonts. + * + * In these cases, `ftconfig.h` will refuse to compile anyway with a + * message like 'couldn't find 32-bit type' or something similar. + * + */ + + +#include + +#define FT_CHAR_BIT CHAR_BIT +#define FT_USHORT_MAX USHRT_MAX +#define FT_INT_MAX INT_MAX +#define FT_INT_MIN INT_MIN +#define FT_UINT_MAX UINT_MAX +#define FT_LONG_MIN LONG_MIN +#define FT_LONG_MAX LONG_MAX +#define FT_ULONG_MAX ULONG_MAX +#ifdef LLONG_MAX +#define FT_LLONG_MAX LLONG_MAX +#endif +#ifdef LLONG_MIN +#define FT_LLONG_MIN LLONG_MIN +#endif +#ifdef ULLONG_MAX +#define FT_ULLONG_MAX ULLONG_MAX +#endif + + + /************************************************************************** + * + * character and string processing + * + */ + + +#include + +#define ft_memchr memchr +#define ft_memcmp memcmp +#define ft_memcpy memcpy +#define ft_memmove memmove +#define ft_memset memset +#define ft_strcat strcat +#define ft_strcmp strcmp +#define ft_strcpy strcpy +#define ft_strlen strlen +#define ft_strncmp strncmp +#define ft_strncpy strncpy +#define ft_strrchr strrchr +#define ft_strstr strstr + + + /************************************************************************** + * + * file handling + * + */ + + +#include + +#define FT_FILE FILE +#define ft_fclose fclose +#define ft_fopen fopen +#define ft_fread fread +#define ft_fseek fseek +#define ft_ftell ftell +#define ft_snprintf snprintf + + + /************************************************************************** + * + * sorting + * + */ + + +#include + +#define ft_qsort qsort + + + /************************************************************************** + * + * memory allocation + * + */ + + +#define ft_scalloc calloc +#define ft_sfree free +#define ft_smalloc malloc +#define ft_srealloc realloc + + + /************************************************************************** + * + * miscellaneous + * + */ + + +#define ft_strtol strtol +#define ft_getenv getenv + + + /************************************************************************** + * + * execution control + * + */ + + +#include + +#define ft_jmp_buf jmp_buf /* note: this cannot be a typedef since */ + /* `jmp_buf` is defined as a macro */ + /* on certain platforms */ + +#define ft_longjmp longjmp +#define ft_setjmp( b ) setjmp( *(ft_jmp_buf*) &(b) ) /* same thing here */ + + + /* The following is only used for debugging purposes, i.e., if */ + /* `FT_DEBUG_LEVEL_ERROR` or `FT_DEBUG_LEVEL_TRACE` are defined. */ + +#include + + +#endif /* FTSTDLIB_H_ */ + + +/* END */ diff --git a/dependencies/winx64/include/freetype2/freetype/config/integer-types.h b/dependencies/winx64/include/freetype2/freetype/config/integer-types.h new file mode 100644 index 0000000..36a0bbc --- /dev/null +++ b/dependencies/winx64/include/freetype2/freetype/config/integer-types.h @@ -0,0 +1,277 @@ +/**************************************************************************** + * + * config/integer-types.h + * + * FreeType integer types definitions. + * + * Copyright (C) 1996-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ +#ifndef FREETYPE_CONFIG_INTEGER_TYPES_H_ +#define FREETYPE_CONFIG_INTEGER_TYPES_H_ + +FT_BEGIN_HEADER + + /* There are systems (like the Texas Instruments 'C54x) where a `char` */ + /* has 16~bits. ANSI~C says that `sizeof(char)` is always~1. Since an */ + /* `int` has 16~bits also for this system, `sizeof(int)` gives~1 which */ + /* is probably unexpected. */ + /* */ + /* `CHAR_BIT` (defined in `limits.h`) gives the number of bits in a */ + /* `char` type. */ + +#ifndef FT_CHAR_BIT +#define FT_CHAR_BIT CHAR_BIT +#endif + +#ifndef FT_SIZEOF_INT + + /* The size of an `int` type. */ +#if FT_UINT_MAX == 0xFFFFUL +#define FT_SIZEOF_INT ( 16 / FT_CHAR_BIT ) +#elif FT_UINT_MAX == 0xFFFFFFFFUL +#define FT_SIZEOF_INT ( 32 / FT_CHAR_BIT ) +#elif FT_UINT_MAX > 0xFFFFFFFFUL && FT_UINT_MAX == 0xFFFFFFFFFFFFFFFFUL +#define FT_SIZEOF_INT ( 64 / FT_CHAR_BIT ) +#else +#error "Unsupported size of `int' type!" +#endif + +#endif /* !defined(FT_SIZEOF_INT) */ + +#ifndef FT_SIZEOF_LONG + + /* The size of a `long` type. A five-byte `long` (as used e.g. on the */ + /* DM642) is recognized but avoided. */ +#if FT_ULONG_MAX == 0xFFFFFFFFUL +#define FT_SIZEOF_LONG ( 32 / FT_CHAR_BIT ) +#elif FT_ULONG_MAX > 0xFFFFFFFFUL && FT_ULONG_MAX == 0xFFFFFFFFFFUL +#define FT_SIZEOF_LONG ( 32 / FT_CHAR_BIT ) +#elif FT_ULONG_MAX > 0xFFFFFFFFUL && FT_ULONG_MAX == 0xFFFFFFFFFFFFFFFFUL +#define FT_SIZEOF_LONG ( 64 / FT_CHAR_BIT ) +#else +#error "Unsupported size of `long' type!" +#endif + +#endif /* !defined(FT_SIZEOF_LONG) */ + +#ifndef FT_SIZEOF_LONG_LONG + + /* The size of a `long long` type if available */ +#if defined( FT_ULLONG_MAX ) && FT_ULLONG_MAX >= 0xFFFFFFFFFFFFFFFFULL +#define FT_SIZEOF_LONG_LONG ( 64 / FT_CHAR_BIT ) +#else +#define FT_SIZEOF_LONG_LONG 0 +#endif + +#endif /* !defined(FT_SIZEOF_LONG_LONG) */ + + + /************************************************************************** + * + * @section: + * basic_types + * + */ + + + /************************************************************************** + * + * @type: + * FT_Int16 + * + * @description: + * A typedef for a 16bit signed integer type. + */ + typedef signed short FT_Int16; + + + /************************************************************************** + * + * @type: + * FT_UInt16 + * + * @description: + * A typedef for a 16bit unsigned integer type. + */ + typedef unsigned short FT_UInt16; + + /* */ + + + /* this #if 0 ... #endif clause is for documentation purposes */ +#if 0 + + /************************************************************************** + * + * @type: + * FT_Int32 + * + * @description: + * A typedef for a 32bit signed integer type. The size depends on the + * configuration. + */ + typedef signed XXX FT_Int32; + + + /************************************************************************** + * + * @type: + * FT_UInt32 + * + * A typedef for a 32bit unsigned integer type. The size depends on the + * configuration. + */ + typedef unsigned XXX FT_UInt32; + + + /************************************************************************** + * + * @type: + * FT_Int64 + * + * A typedef for a 64bit signed integer type. The size depends on the + * configuration. Only defined if there is real 64bit support; + * otherwise, it gets emulated with a structure (if necessary). + */ + typedef signed XXX FT_Int64; + + + /************************************************************************** + * + * @type: + * FT_UInt64 + * + * A typedef for a 64bit unsigned integer type. The size depends on the + * configuration. Only defined if there is real 64bit support; + * otherwise, it gets emulated with a structure (if necessary). + */ + typedef unsigned XXX FT_UInt64; + + /* */ + +#endif + +#if FT_SIZEOF_INT == ( 32 / FT_CHAR_BIT ) + + typedef signed int FT_Int32; + typedef unsigned int FT_UInt32; + +#elif FT_SIZEOF_LONG == ( 32 / FT_CHAR_BIT ) + + typedef signed long FT_Int32; + typedef unsigned long FT_UInt32; + +#else +#error "no 32bit type found -- please check your configuration files" +#endif + + + /* look up an integer type that is at least 32~bits */ +#if FT_SIZEOF_INT >= ( 32 / FT_CHAR_BIT ) + + typedef int FT_Fast; + typedef unsigned int FT_UFast; + +#elif FT_SIZEOF_LONG >= ( 32 / FT_CHAR_BIT ) + + typedef long FT_Fast; + typedef unsigned long FT_UFast; + +#endif + + + /* determine whether we have a 64-bit integer type */ +#if FT_SIZEOF_LONG == ( 64 / FT_CHAR_BIT ) + +#define FT_INT64 long +#define FT_UINT64 unsigned long + +#elif FT_SIZEOF_LONG_LONG >= ( 64 / FT_CHAR_BIT ) + +#define FT_INT64 long long int +#define FT_UINT64 unsigned long long int + + /************************************************************************** + * + * A 64-bit data type may create compilation problems if you compile in + * strict ANSI mode. To avoid them, we disable other 64-bit data types if + * `__STDC__` is defined. You can however ignore this rule by defining the + * `FT_CONFIG_OPTION_FORCE_INT64` configuration macro. + */ +#elif !defined( __STDC__ ) || defined( FT_CONFIG_OPTION_FORCE_INT64 ) + +#if defined( _MSC_VER ) && _MSC_VER >= 900 /* Visual C++ (and Intel C++) */ + + /* this compiler provides the `__int64` type */ +#define FT_INT64 __int64 +#define FT_UINT64 unsigned __int64 + +#elif defined( __BORLANDC__ ) /* Borland C++ */ + + /* XXXX: We should probably check the value of `__BORLANDC__` in order */ + /* to test the compiler version. */ + + /* this compiler provides the `__int64` type */ +#define FT_INT64 __int64 +#define FT_UINT64 unsigned __int64 + +#elif defined( __WATCOMC__ ) && __WATCOMC__ >= 1100 /* Watcom C++ */ + +#define FT_INT64 long long int +#define FT_UINT64 unsigned long long int + +#elif defined( __MWERKS__ ) /* Metrowerks CodeWarrior */ + +#define FT_INT64 long long int +#define FT_UINT64 unsigned long long int + +#elif defined( __GNUC__ ) + + /* GCC provides the `long long` type */ +#define FT_INT64 long long int +#define FT_UINT64 unsigned long long int + +#endif /* !__STDC__ */ + +#endif /* FT_SIZEOF_LONG == (64 / FT_CHAR_BIT) */ + +#ifdef FT_INT64 + + typedef FT_INT64 FT_Int64; + typedef FT_UINT64 FT_UInt64; + +# define FT_INT64_ZERO 0 + +#else /* !FT_INT64 */ + + /* we need to emulate 64-bit data types if none are available */ + + typedef struct FT_Int64_ + { + FT_UInt32 lo; + FT_UInt32 hi; + + } FT_Int64; + + typedef struct FT_UInt64_ + { + FT_UInt32 lo; + FT_UInt32 hi; + + } FT_UInt64; + +# define FT_INT64_ZERO { 0, 0 } + +#endif /* !FT_INT64 */ + +FT_END_HEADER + +#endif /* FREETYPE_CONFIG_INTEGER_TYPES_H_ */ diff --git a/dependencies/winx64/include/freetype2/freetype/config/mac-support.h b/dependencies/winx64/include/freetype2/freetype/config/mac-support.h new file mode 100644 index 0000000..07b6f91 --- /dev/null +++ b/dependencies/winx64/include/freetype2/freetype/config/mac-support.h @@ -0,0 +1,49 @@ +/**************************************************************************** + * + * config/mac-support.h + * + * Mac/OS X support configuration header. + * + * Copyright (C) 1996-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ +#ifndef FREETYPE_CONFIG_MAC_SUPPORT_H_ +#define FREETYPE_CONFIG_MAC_SUPPORT_H_ + + /************************************************************************** + * + * Mac support + * + * This is the only necessary change, so it is defined here instead + * providing a new configuration file. + */ +#if defined( __APPLE__ ) || ( defined( __MWERKS__ ) && defined( macintosh ) ) + /* No Carbon frameworks for 64bit 10.4.x. */ + /* `AvailabilityMacros.h` is available since Mac OS X 10.2, */ + /* so guess the system version by maximum errno before inclusion. */ +#include +#ifdef ECANCELED /* defined since 10.2 */ +#include "AvailabilityMacros.h" +#endif +#if defined( __LP64__ ) && \ + ( MAC_OS_X_VERSION_MIN_REQUIRED <= MAC_OS_X_VERSION_10_4 ) +#undef FT_MACINTOSH +#endif + +#elif defined( __SC__ ) || defined( __MRC__ ) + /* Classic MacOS compilers */ +#include "ConditionalMacros.h" +#if TARGET_OS_MAC +#define FT_MACINTOSH 1 +#endif + +#endif /* Mac support */ + +#endif /* FREETYPE_CONFIG_MAC_SUPPORT_H_ */ diff --git a/dependencies/winx64/include/freetype2/freetype/config/public-macros.h b/dependencies/winx64/include/freetype2/freetype/config/public-macros.h new file mode 100644 index 0000000..4aba639 --- /dev/null +++ b/dependencies/winx64/include/freetype2/freetype/config/public-macros.h @@ -0,0 +1,138 @@ +/**************************************************************************** + * + * config/public-macros.h + * + * Define a set of compiler macros used in public FreeType headers. + * + * Copyright (C) 2020-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + /* + * The definitions in this file are used by the public FreeType headers + * and thus should be considered part of the public API. + * + * Other compiler-specific macro definitions that are not exposed by the + * FreeType API should go into + * `include/freetype/internal/compiler-macros.h` instead. + */ +#ifndef FREETYPE_CONFIG_PUBLIC_MACROS_H_ +#define FREETYPE_CONFIG_PUBLIC_MACROS_H_ + + /* + * `FT_BEGIN_HEADER` and `FT_END_HEADER` might have already been defined + * by `freetype/config/ftheader.h`, but we don't want to include this + * header here, so redefine the macros here only when needed. Their + * definition is very stable, so keeping them in sync with the ones in the + * header should not be a maintenance issue. + */ +#ifndef FT_BEGIN_HEADER +#ifdef __cplusplus +#define FT_BEGIN_HEADER extern "C" { +#else +#define FT_BEGIN_HEADER /* empty */ +#endif +#endif /* FT_BEGIN_HEADER */ + +#ifndef FT_END_HEADER +#ifdef __cplusplus +#define FT_END_HEADER } +#else +#define FT_END_HEADER /* empty */ +#endif +#endif /* FT_END_HEADER */ + + +FT_BEGIN_HEADER + + /* + * Mark a function declaration as public. This ensures it will be + * properly exported to client code. Place this before a function + * declaration. + * + * NOTE: This macro should be considered an internal implementation + * detail, and not part of the FreeType API. It is only defined here + * because it is needed by `FT_EXPORT`. + */ + + /* Visual C, MinGW, Cygwin */ +#if defined( _WIN32 ) || defined( __CYGWIN__ ) + +#if defined( FT2_BUILD_LIBRARY ) && defined( DLL_EXPORT ) +#define FT_PUBLIC_FUNCTION_ATTRIBUTE __declspec( dllexport ) +#elif defined( DLL_IMPORT ) +#define FT_PUBLIC_FUNCTION_ATTRIBUTE __declspec( dllimport ) +#endif + + /* gcc, clang */ +#elif ( defined( __GNUC__ ) && __GNUC__ >= 4 ) || defined( __clang__ ) +#define FT_PUBLIC_FUNCTION_ATTRIBUTE \ + __attribute__(( visibility( "default" ) )) + + /* Sun */ +#elif defined( __SUNPRO_C ) && __SUNPRO_C >= 0x550 +#define FT_PUBLIC_FUNCTION_ATTRIBUTE __global +#endif + + +#ifndef FT_PUBLIC_FUNCTION_ATTRIBUTE +#define FT_PUBLIC_FUNCTION_ATTRIBUTE /* empty */ +#endif + + + /* + * Define a public FreeType API function. This ensures it is properly + * exported or imported at build time. The macro parameter is the + * function's return type as in: + * + * FT_EXPORT( FT_Bool ) + * FT_Object_Method( FT_Object obj, + * ... ); + * + * NOTE: This requires that all `FT_EXPORT` uses are inside + * `FT_BEGIN_HEADER ... FT_END_HEADER` blocks. This guarantees that the + * functions are exported with C linkage, even when the header is included + * by a C++ source file. + */ +#define FT_EXPORT( x ) FT_PUBLIC_FUNCTION_ATTRIBUTE extern x + + + /* + * `FT_UNUSED` indicates that a given parameter is not used -- this is + * only used to get rid of unpleasant compiler warnings. + * + * Technically, this was not meant to be part of the public API, but some + * third-party code depends on it. + */ +#ifndef FT_UNUSED +#define FT_UNUSED( arg ) ( (arg) = (arg) ) +#endif + + + /* + * Support for casts in both C and C++. + */ +#ifdef __cplusplus +#define FT_STATIC_CAST( type, var ) static_cast(var) +#define FT_REINTERPRET_CAST( type, var ) reinterpret_cast(var) + +#define FT_STATIC_BYTE_CAST( type, var ) \ + static_cast( static_cast( var ) ) +#else +#define FT_STATIC_CAST( type, var ) (type)(var) +#define FT_REINTERPRET_CAST( type, var ) (type)(var) + +#define FT_STATIC_BYTE_CAST( type, var ) (type)(unsigned char)(var) +#endif + + +FT_END_HEADER + +#endif /* FREETYPE_CONFIG_PUBLIC_MACROS_H_ */ diff --git a/dependencies/winx64/include/freetype2/freetype/freetype.h b/dependencies/winx64/include/freetype2/freetype/freetype.h new file mode 100644 index 0000000..ea0e080 --- /dev/null +++ b/dependencies/winx64/include/freetype2/freetype/freetype.h @@ -0,0 +1,5293 @@ +/**************************************************************************** + * + * freetype.h + * + * FreeType high-level API and common types (specification only). + * + * Copyright (C) 1996-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + +#ifndef FREETYPE_H_ +#define FREETYPE_H_ + + +#include +#include FT_CONFIG_CONFIG_H +#include +#include + + +FT_BEGIN_HEADER + + + + /************************************************************************** + * + * @section: + * preamble + * + * @title: + * Preamble + * + * @abstract: + * What FreeType is and isn't + * + * @description: + * FreeType is a library that provides access to glyphs in font files. It + * scales the glyph images and their metrics to a requested size, and it + * rasterizes the glyph images to produce pixel or subpixel alpha coverage + * bitmaps. + * + * Note that FreeType is _not_ a text layout engine. You have to use + * higher-level libraries like HarfBuzz, Pango, or ICU for that. + * + * Note also that FreeType does _not_ perform alpha blending or + * compositing the resulting bitmaps or pixmaps by itself. Use your + * favourite graphics library (for example, Cairo or Skia) to further + * process FreeType's output. + * + */ + + + /************************************************************************** + * + * @section: + * header_inclusion + * + * @title: + * FreeType's header inclusion scheme + * + * @abstract: + * How client applications should include FreeType header files. + * + * @description: + * To be as flexible as possible (and for historical reasons), you must + * load file `ft2build.h` first before other header files, for example + * + * ``` + * #include + * + * #include + * #include + * ``` + */ + + + /************************************************************************** + * + * @section: + * user_allocation + * + * @title: + * User allocation + * + * @abstract: + * How client applications should allocate FreeType data structures. + * + * @description: + * FreeType assumes that structures allocated by the user and passed as + * arguments are zeroed out except for the actual data. In other words, + * it is recommended to use `calloc` (or variants of it) instead of + * `malloc` for allocation. + * + */ + + + /************************************************************************** + * + * @section: + * font_testing_macros + * + * @title: + * Font Testing Macros + * + * @abstract: + * Macros to test various properties of fonts. + * + * @description: + * Macros to test the most important font properties. + * + * It is recommended to use these high-level macros instead of directly + * testing the corresponding flags, which are scattered over various + * structures. + * + * @order: + * FT_HAS_HORIZONTAL + * FT_HAS_VERTICAL + * FT_HAS_KERNING + * FT_HAS_FIXED_SIZES + * FT_HAS_GLYPH_NAMES + * FT_HAS_COLOR + * FT_HAS_MULTIPLE_MASTERS + * FT_HAS_SVG + * FT_HAS_SBIX + * FT_HAS_SBIX_OVERLAY + * + * FT_IS_SFNT + * FT_IS_SCALABLE + * FT_IS_FIXED_WIDTH + * FT_IS_CID_KEYED + * FT_IS_TRICKY + * FT_IS_NAMED_INSTANCE + * FT_IS_VARIATION + * + */ + + + /************************************************************************** + * + * @section: + * library_setup + * + * @title: + * Library Setup + * + * @abstract: + * Functions to start and end the usage of the FreeType library. + * + * @description: + * Functions to start and end the usage of the FreeType library. + * + * Note that @FT_Library_Version and @FREETYPE_XXX are of limited use + * because even a new release of FreeType with only documentation + * changes increases the version number. + * + * @order: + * FT_Library + * FT_Init_FreeType + * FT_Done_FreeType + * + * FT_Library_Version + * FREETYPE_XXX + * + */ + + + /************************************************************************** + * + * @section: + * face_creation + * + * @title: + * Face Creation + * + * @abstract: + * Functions to manage fonts. + * + * @description: + * The functions and structures collected in this section operate on + * fonts globally. + * + * @order: + * FT_Face + * FT_FaceRec + * FT_FACE_FLAG_XXX + * FT_STYLE_FLAG_XXX + * + * FT_New_Face + * FT_Done_Face + * FT_Reference_Face + * FT_New_Memory_Face + * FT_Face_Properties + * FT_Open_Face + * FT_Open_Args + * FT_OPEN_XXX + * FT_Parameter + * FT_Attach_File + * FT_Attach_Stream + * + */ + + + /************************************************************************** + * + * @section: + * sizing_and_scaling + * + * @title: + * Sizing and Scaling + * + * @abstract: + * Functions to manage font sizes. + * + * @description: + * The functions and structures collected in this section are related to + * selecting and manipulating the size of a font globally. + * + * @order: + * FT_Size + * FT_SizeRec + * FT_Size_Metrics + * + * FT_Bitmap_Size + * + * FT_Set_Char_Size + * FT_Set_Pixel_Sizes + * FT_Request_Size + * FT_Select_Size + * FT_Size_Request_Type + * FT_Size_RequestRec + * FT_Size_Request + * + * FT_Set_Transform + * FT_Get_Transform + * + */ + + + /************************************************************************** + * + * @section: + * glyph_retrieval + * + * @title: + * Glyph Retrieval + * + * @abstract: + * Functions to manage glyphs. + * + * @description: + * The functions and structures collected in this section operate on + * single glyphs, of which @FT_Load_Glyph is most important. + * + * @order: + * FT_GlyphSlot + * FT_GlyphSlotRec + * FT_Glyph_Metrics + * + * FT_Load_Glyph + * FT_LOAD_XXX + * FT_LOAD_TARGET_MODE + * FT_LOAD_TARGET_XXX + * + * FT_Render_Glyph + * FT_Render_Mode + * FT_Get_Kerning + * FT_Kerning_Mode + * FT_Get_Track_Kerning + * + */ + + + /************************************************************************** + * + * @section: + * character_mapping + * + * @title: + * Character Mapping + * + * @abstract: + * Functions to manage character-to-glyph maps. + * + * @description: + * This section holds functions and structures that are related to + * mapping character input codes to glyph indices. + * + * Note that for many scripts the simplistic approach used by FreeType + * of mapping a single character to a single glyph is not valid or + * possible! In general, a higher-level library like HarfBuzz or ICU + * should be used for handling text strings. + * + * @order: + * FT_CharMap + * FT_CharMapRec + * FT_Encoding + * FT_ENC_TAG + * + * FT_Select_Charmap + * FT_Set_Charmap + * FT_Get_Charmap_Index + * + * FT_Get_Char_Index + * FT_Get_First_Char + * FT_Get_Next_Char + * FT_Load_Char + * + */ + + + /************************************************************************** + * + * @section: + * information_retrieval + * + * @title: + * Information Retrieval + * + * @abstract: + * Functions to retrieve font and glyph information. + * + * @description: + * Functions to retrieve font and glyph information. Only some very + * basic data is covered; see also the chapter on the format-specific + * API for more. + * + * + * @order: + * FT_Get_Name_Index + * FT_Get_Glyph_Name + * FT_Get_Postscript_Name + * FT_Get_FSType_Flags + * FT_FSTYPE_XXX + * FT_Get_SubGlyph_Info + * FT_SUBGLYPH_FLAG_XXX + * + */ + + + /************************************************************************** + * + * @section: + * other_api_data + * + * @title: + * Other API Data + * + * @abstract: + * Other structures, enumerations, and macros. + * + * @description: + * Other structures, enumerations, and macros. Deprecated functions are + * also listed here. + * + * @order: + * FT_Face_Internal + * FT_Size_Internal + * FT_Slot_Internal + * + * FT_SubGlyph + * + * FT_HAS_FAST_GLYPHS + * FT_Face_CheckTrueTypePatents + * FT_Face_SetUnpatentedHinting + * + */ + + + /*************************************************************************/ + /*************************************************************************/ + /* */ + /* B A S I C T Y P E S */ + /* */ + /*************************************************************************/ + /*************************************************************************/ + + + /************************************************************************** + * + * @section: + * glyph_retrieval + * + */ + + /************************************************************************** + * + * @struct: + * FT_Glyph_Metrics + * + * @description: + * A structure to model the metrics of a single glyph. The values are + * expressed in 26.6 fractional pixel format; if the flag + * @FT_LOAD_NO_SCALE has been used while loading the glyph, values are + * expressed in font units instead. + * + * @fields: + * width :: + * The glyph's width. + * + * height :: + * The glyph's height. + * + * horiBearingX :: + * Left side bearing for horizontal layout. + * + * horiBearingY :: + * Top side bearing for horizontal layout. + * + * horiAdvance :: + * Advance width for horizontal layout. + * + * vertBearingX :: + * Left side bearing for vertical layout. + * + * vertBearingY :: + * Top side bearing for vertical layout. Larger positive values mean + * further below the vertical glyph origin. + * + * vertAdvance :: + * Advance height for vertical layout. Positive values mean the glyph + * has a positive advance downward. + * + * @note: + * If not disabled with @FT_LOAD_NO_HINTING, the values represent + * dimensions of the hinted glyph (in case hinting is applicable). + * + * Stroking a glyph with an outside border does not increase + * `horiAdvance` or `vertAdvance`; you have to manually adjust these + * values to account for the added width and height. + * + * FreeType doesn't use the 'VORG' table data for CFF fonts because it + * doesn't have an interface to quickly retrieve the glyph height. The + * y~coordinate of the vertical origin can be simply computed as + * `vertBearingY + height` after loading a glyph. + */ + typedef struct FT_Glyph_Metrics_ + { + FT_Pos width; + FT_Pos height; + + FT_Pos horiBearingX; + FT_Pos horiBearingY; + FT_Pos horiAdvance; + + FT_Pos vertBearingX; + FT_Pos vertBearingY; + FT_Pos vertAdvance; + + } FT_Glyph_Metrics; + + + /************************************************************************** + * + * @section: + * sizing_and_scaling + * + */ + + /************************************************************************** + * + * @struct: + * FT_Bitmap_Size + * + * @description: + * This structure models the metrics of a bitmap strike (i.e., a set of + * glyphs for a given point size and resolution) in a bitmap font. It is + * used for the `available_sizes` field of @FT_Face. + * + * @fields: + * height :: + * The vertical distance, in pixels, between two consecutive baselines. + * It is always positive. + * + * width :: + * The average width, in pixels, of all glyphs in the strike. + * + * size :: + * The nominal size of the strike in 26.6 fractional points. This + * field is not very useful. + * + * x_ppem :: + * The horizontal ppem (nominal width) in 26.6 fractional pixels. + * + * y_ppem :: + * The vertical ppem (nominal height) in 26.6 fractional pixels. + * + * @note: + * Windows FNT: + * The nominal size given in a FNT font is not reliable. If the driver + * finds it incorrect, it sets `size` to some calculated values, and + * `x_ppem` and `y_ppem` to the pixel width and height given in the + * font, respectively. + * + * TrueType embedded bitmaps: + * `size`, `width`, and `height` values are not contained in the bitmap + * strike itself. They are computed from the global font parameters. + */ + typedef struct FT_Bitmap_Size_ + { + FT_Short height; + FT_Short width; + + FT_Pos size; + + FT_Pos x_ppem; + FT_Pos y_ppem; + + } FT_Bitmap_Size; + + + /*************************************************************************/ + /*************************************************************************/ + /* */ + /* O B J E C T C L A S S E S */ + /* */ + /*************************************************************************/ + /*************************************************************************/ + + /************************************************************************** + * + * @section: + * library_setup + * + */ + + /************************************************************************** + * + * @type: + * FT_Library + * + * @description: + * A handle to a FreeType library instance. Each 'library' is completely + * independent from the others; it is the 'root' of a set of objects like + * fonts, faces, sizes, etc. + * + * It also embeds a memory manager (see @FT_Memory), as well as a + * scan-line converter object (see @FT_Raster). + * + * [Since 2.5.6] In multi-threaded applications it is easiest to use one + * `FT_Library` object per thread. In case this is too cumbersome, a + * single `FT_Library` object across threads is possible also, as long as + * a mutex lock is used around @FT_New_Face and @FT_Done_Face. + * + * @note: + * Library objects are normally created by @FT_Init_FreeType, and + * destroyed with @FT_Done_FreeType. If you need reference-counting + * (cf. @FT_Reference_Library), use @FT_New_Library and @FT_Done_Library. + */ + typedef struct FT_LibraryRec_ *FT_Library; + + + /************************************************************************** + * + * @section: + * module_management + * + */ + + /************************************************************************** + * + * @type: + * FT_Module + * + * @description: + * A handle to a given FreeType module object. A module can be a font + * driver, a renderer, or anything else that provides services to the + * former. + */ + typedef struct FT_ModuleRec_* FT_Module; + + + /************************************************************************** + * + * @type: + * FT_Driver + * + * @description: + * A handle to a given FreeType font driver object. A font driver is a + * module capable of creating faces from font files. + */ + typedef struct FT_DriverRec_* FT_Driver; + + + /************************************************************************** + * + * @type: + * FT_Renderer + * + * @description: + * A handle to a given FreeType renderer. A renderer is a module in + * charge of converting a glyph's outline image to a bitmap. It supports + * a single glyph image format, and one or more target surface depths. + */ + typedef struct FT_RendererRec_* FT_Renderer; + + + /************************************************************************** + * + * @section: + * face_creation + * + */ + + /************************************************************************** + * + * @type: + * FT_Face + * + * @description: + * A handle to a typographic face object. A face object models a given + * typeface, in a given style. + * + * @note: + * A face object also owns a single @FT_GlyphSlot object, as well as one + * or more @FT_Size objects. + * + * Use @FT_New_Face or @FT_Open_Face to create a new face object from a + * given filepath or a custom input stream. + * + * Use @FT_Done_Face to destroy it (along with its slot and sizes). + * + * An `FT_Face` object can only be safely used from one thread at a time. + * Similarly, creation and destruction of `FT_Face` with the same + * @FT_Library object can only be done from one thread at a time. On the + * other hand, functions like @FT_Load_Glyph and its siblings are + * thread-safe and do not need the lock to be held as long as the same + * `FT_Face` object is not used from multiple threads at the same time. + * + * @also: + * See @FT_FaceRec for the publicly accessible fields of a given face + * object. + */ + typedef struct FT_FaceRec_* FT_Face; + + + /************************************************************************** + * + * @section: + * sizing_and_scaling + * + */ + + /************************************************************************** + * + * @type: + * FT_Size + * + * @description: + * A handle to an object that models a face scaled to a given character + * size. + * + * @note: + * An @FT_Face has one _active_ `FT_Size` object that is used by + * functions like @FT_Load_Glyph to determine the scaling transformation + * that in turn is used to load and hint glyphs and metrics. + * + * A newly created `FT_Size` object contains only meaningless zero values. + * You must use @FT_Set_Char_Size, @FT_Set_Pixel_Sizes, @FT_Request_Size + * or even @FT_Select_Size to change the content (i.e., the scaling + * values) of the active `FT_Size`. Otherwise, the scaling and hinting + * will not be performed. + * + * You can use @FT_New_Size to create additional size objects for a given + * @FT_Face, but they won't be used by other functions until you activate + * it through @FT_Activate_Size. Only one size can be activated at any + * given time per face. + * + * @also: + * See @FT_SizeRec for the publicly accessible fields of a given size + * object. + */ + typedef struct FT_SizeRec_* FT_Size; + + + /************************************************************************** + * + * @section: + * glyph_retrieval + * + */ + + /************************************************************************** + * + * @type: + * FT_GlyphSlot + * + * @description: + * A handle to a given 'glyph slot'. A slot is a container that can hold + * any of the glyphs contained in its parent face. + * + * In other words, each time you call @FT_Load_Glyph or @FT_Load_Char, + * the slot's content is erased by the new glyph data, i.e., the glyph's + * metrics, its image (bitmap or outline), and other control information. + * + * @also: + * See @FT_GlyphSlotRec for the publicly accessible glyph fields. + */ + typedef struct FT_GlyphSlotRec_* FT_GlyphSlot; + + + /************************************************************************** + * + * @section: + * character_mapping + * + */ + + /************************************************************************** + * + * @type: + * FT_CharMap + * + * @description: + * A handle to a character map (usually abbreviated to 'charmap'). A + * charmap is used to translate character codes in a given encoding into + * glyph indexes for its parent's face. Some font formats may provide + * several charmaps per font. + * + * Each face object owns zero or more charmaps, but only one of them can + * be 'active', providing the data used by @FT_Get_Char_Index or + * @FT_Load_Char. + * + * The list of available charmaps in a face is available through the + * `face->num_charmaps` and `face->charmaps` fields of @FT_FaceRec. + * + * The currently active charmap is available as `face->charmap`. You + * should call @FT_Set_Charmap to change it. + * + * @note: + * When a new face is created (either through @FT_New_Face or + * @FT_Open_Face), the library looks for a Unicode charmap within the + * list and automatically activates it. If there is no Unicode charmap, + * FreeType doesn't set an 'active' charmap. + * + * @also: + * See @FT_CharMapRec for the publicly accessible fields of a given + * character map. + */ + typedef struct FT_CharMapRec_* FT_CharMap; + + + /************************************************************************** + * + * @macro: + * FT_ENC_TAG + * + * @description: + * This macro converts four-letter tags into an unsigned long. It is + * used to define 'encoding' identifiers (see @FT_Encoding). + * + * @note: + * Since many 16-bit compilers don't like 32-bit enumerations, you should + * redefine this macro in case of problems to something like this: + * + * ``` + * #define FT_ENC_TAG( value, a, b, c, d ) value + * ``` + * + * to get a simple enumeration without assigning special numbers. + */ + +#ifndef FT_ENC_TAG + +#define FT_ENC_TAG( value, a, b, c, d ) \ + value = ( ( FT_STATIC_BYTE_CAST( FT_UInt32, a ) << 24 ) | \ + ( FT_STATIC_BYTE_CAST( FT_UInt32, b ) << 16 ) | \ + ( FT_STATIC_BYTE_CAST( FT_UInt32, c ) << 8 ) | \ + FT_STATIC_BYTE_CAST( FT_UInt32, d ) ) + +#endif /* FT_ENC_TAG */ + + + /************************************************************************** + * + * @enum: + * FT_Encoding + * + * @description: + * An enumeration to specify character sets supported by charmaps. Used + * in the @FT_Select_Charmap API function. + * + * @note: + * Despite the name, this enumeration lists specific character + * repertoires (i.e., charsets), and not text encoding methods (e.g., + * UTF-8, UTF-16, etc.). + * + * Other encodings might be defined in the future. + * + * @values: + * FT_ENCODING_NONE :: + * The encoding value~0 is reserved for all formats except BDF, PCF, + * and Windows FNT; see below for more information. + * + * FT_ENCODING_UNICODE :: + * The Unicode character set. This value covers all versions of the + * Unicode repertoire, including ASCII and Latin-1. Most fonts include + * a Unicode charmap, but not all of them. + * + * For example, if you want to access Unicode value U+1F028 (and the + * font contains it), use value 0x1F028 as the input value for + * @FT_Get_Char_Index. + * + * FT_ENCODING_MS_SYMBOL :: + * Microsoft Symbol encoding, used to encode mathematical symbols and + * wingdings. For more information, see + * 'https://learn.microsoft.com/typography/opentype/spec/recom#non-standard-symbol-fonts', + * 'http://www.kostis.net/charsets/symbol.htm', and + * 'http://www.kostis.net/charsets/wingding.htm'. + * + * This encoding uses character codes from the PUA (Private Unicode + * Area) in the range U+F020-U+F0FF. + * + * FT_ENCODING_SJIS :: + * Shift JIS encoding for Japanese. More info at + * 'https://en.wikipedia.org/wiki/Shift_JIS'. See note on multi-byte + * encodings below. + * + * FT_ENCODING_PRC :: + * Corresponds to encoding systems mainly for Simplified Chinese as + * used in People's Republic of China (PRC). The encoding layout is + * based on GB~2312 and its supersets GBK and GB~18030. + * + * FT_ENCODING_BIG5 :: + * Corresponds to an encoding system for Traditional Chinese as used in + * Taiwan and Hong Kong. + * + * FT_ENCODING_WANSUNG :: + * Corresponds to the Korean encoding system known as Extended Wansung + * (MS Windows code page 949). For more information see + * 'https://www.unicode.org/Public/MAPPINGS/VENDORS/MICSFT/WindowsBestFit/bestfit949.txt'. + * + * FT_ENCODING_JOHAB :: + * The Korean standard character set (KS~C 5601-1992), which + * corresponds to MS Windows code page 1361. This character set + * includes all possible Hangul character combinations. + * + * FT_ENCODING_ADOBE_LATIN_1 :: + * Corresponds to a Latin-1 encoding as defined in a Type~1 PostScript + * font. It is limited to 256 character codes. + * + * FT_ENCODING_ADOBE_STANDARD :: + * Adobe Standard encoding, as found in Type~1, CFF, and OpenType/CFF + * fonts. It is limited to 256 character codes. + * + * FT_ENCODING_ADOBE_EXPERT :: + * Adobe Expert encoding, as found in Type~1, CFF, and OpenType/CFF + * fonts. It is limited to 256 character codes. + * + * FT_ENCODING_ADOBE_CUSTOM :: + * Corresponds to a custom encoding, as found in Type~1, CFF, and + * OpenType/CFF fonts. It is limited to 256 character codes. + * + * FT_ENCODING_APPLE_ROMAN :: + * Apple roman encoding. Many TrueType and OpenType fonts contain a + * charmap for this 8-bit encoding, since older versions of Mac OS are + * able to use it. + * + * FT_ENCODING_OLD_LATIN_2 :: + * This value is deprecated and was neither used nor reported by + * FreeType. Don't use or test for it. + * + * FT_ENCODING_MS_SJIS :: + * Same as FT_ENCODING_SJIS. Deprecated. + * + * FT_ENCODING_MS_GB2312 :: + * Same as FT_ENCODING_PRC. Deprecated. + * + * FT_ENCODING_MS_BIG5 :: + * Same as FT_ENCODING_BIG5. Deprecated. + * + * FT_ENCODING_MS_WANSUNG :: + * Same as FT_ENCODING_WANSUNG. Deprecated. + * + * FT_ENCODING_MS_JOHAB :: + * Same as FT_ENCODING_JOHAB. Deprecated. + * + * @note: + * When loading a font, FreeType makes a Unicode charmap active if + * possible (either if the font provides such a charmap, or if FreeType + * can synthesize one from PostScript glyph name dictionaries; in either + * case, the charmap is tagged with `FT_ENCODING_UNICODE`). If such a + * charmap is synthesized, it is placed at the first position of the + * charmap array. + * + * All other encodings are considered legacy and tagged only if + * explicitly defined in the font file. Otherwise, `FT_ENCODING_NONE` is + * used. + * + * `FT_ENCODING_NONE` is set by the BDF and PCF drivers if the charmap is + * neither Unicode nor ISO-8859-1 (otherwise it is set to + * `FT_ENCODING_UNICODE`). Use @FT_Get_BDF_Charset_ID to find out which + * encoding is really present. If, for example, the `cs_registry` field + * is 'KOI8' and the `cs_encoding` field is 'R', the font is encoded in + * KOI8-R. + * + * `FT_ENCODING_NONE` is always set (with a single exception) by the + * winfonts driver. Use @FT_Get_WinFNT_Header and examine the `charset` + * field of the @FT_WinFNT_HeaderRec structure to find out which encoding + * is really present. For example, @FT_WinFNT_ID_CP1251 (204) means + * Windows code page 1251 (for Russian). + * + * `FT_ENCODING_NONE` is set if `platform_id` is @TT_PLATFORM_MACINTOSH + * and `encoding_id` is not `TT_MAC_ID_ROMAN` (otherwise it is set to + * `FT_ENCODING_APPLE_ROMAN`). + * + * If `platform_id` is @TT_PLATFORM_MACINTOSH, use the function + * @FT_Get_CMap_Language_ID to query the Mac language ID that may be + * needed to be able to distinguish Apple encoding variants. See + * + * https://www.unicode.org/Public/MAPPINGS/VENDORS/APPLE/Readme.txt + * + * to get an idea how to do that. Basically, if the language ID is~0, + * don't use it, otherwise subtract 1 from the language ID. Then examine + * `encoding_id`. If, for example, `encoding_id` is `TT_MAC_ID_ROMAN` + * and the language ID (minus~1) is `TT_MAC_LANGID_GREEK`, it is the + * Greek encoding, not Roman. `TT_MAC_ID_ARABIC` with + * `TT_MAC_LANGID_FARSI` means the Farsi variant of the Arabic encoding. + */ + typedef enum FT_Encoding_ + { + FT_ENC_TAG( FT_ENCODING_NONE, 0, 0, 0, 0 ), + + FT_ENC_TAG( FT_ENCODING_MS_SYMBOL, 's', 'y', 'm', 'b' ), + FT_ENC_TAG( FT_ENCODING_UNICODE, 'u', 'n', 'i', 'c' ), + + FT_ENC_TAG( FT_ENCODING_SJIS, 's', 'j', 'i', 's' ), + FT_ENC_TAG( FT_ENCODING_PRC, 'g', 'b', ' ', ' ' ), + FT_ENC_TAG( FT_ENCODING_BIG5, 'b', 'i', 'g', '5' ), + FT_ENC_TAG( FT_ENCODING_WANSUNG, 'w', 'a', 'n', 's' ), + FT_ENC_TAG( FT_ENCODING_JOHAB, 'j', 'o', 'h', 'a' ), + + /* for backward compatibility */ + FT_ENCODING_GB2312 = FT_ENCODING_PRC, + FT_ENCODING_MS_SJIS = FT_ENCODING_SJIS, + FT_ENCODING_MS_GB2312 = FT_ENCODING_PRC, + FT_ENCODING_MS_BIG5 = FT_ENCODING_BIG5, + FT_ENCODING_MS_WANSUNG = FT_ENCODING_WANSUNG, + FT_ENCODING_MS_JOHAB = FT_ENCODING_JOHAB, + + FT_ENC_TAG( FT_ENCODING_ADOBE_STANDARD, 'A', 'D', 'O', 'B' ), + FT_ENC_TAG( FT_ENCODING_ADOBE_EXPERT, 'A', 'D', 'B', 'E' ), + FT_ENC_TAG( FT_ENCODING_ADOBE_CUSTOM, 'A', 'D', 'B', 'C' ), + FT_ENC_TAG( FT_ENCODING_ADOBE_LATIN_1, 'l', 'a', 't', '1' ), + + FT_ENC_TAG( FT_ENCODING_OLD_LATIN_2, 'l', 'a', 't', '2' ), + + FT_ENC_TAG( FT_ENCODING_APPLE_ROMAN, 'a', 'r', 'm', 'n' ) + + } FT_Encoding; + + + /* these constants are deprecated; use the corresponding `FT_Encoding` */ + /* values instead */ +#define ft_encoding_none FT_ENCODING_NONE +#define ft_encoding_unicode FT_ENCODING_UNICODE +#define ft_encoding_symbol FT_ENCODING_MS_SYMBOL +#define ft_encoding_latin_1 FT_ENCODING_ADOBE_LATIN_1 +#define ft_encoding_latin_2 FT_ENCODING_OLD_LATIN_2 +#define ft_encoding_sjis FT_ENCODING_SJIS +#define ft_encoding_gb2312 FT_ENCODING_PRC +#define ft_encoding_big5 FT_ENCODING_BIG5 +#define ft_encoding_wansung FT_ENCODING_WANSUNG +#define ft_encoding_johab FT_ENCODING_JOHAB + +#define ft_encoding_adobe_standard FT_ENCODING_ADOBE_STANDARD +#define ft_encoding_adobe_expert FT_ENCODING_ADOBE_EXPERT +#define ft_encoding_adobe_custom FT_ENCODING_ADOBE_CUSTOM +#define ft_encoding_apple_roman FT_ENCODING_APPLE_ROMAN + + + /************************************************************************** + * + * @struct: + * FT_CharMapRec + * + * @description: + * The base charmap structure. + * + * @fields: + * face :: + * A handle to the parent face object. + * + * encoding :: + * An @FT_Encoding tag identifying the charmap. Use this with + * @FT_Select_Charmap. + * + * platform_id :: + * An ID number describing the platform for the following encoding ID. + * This comes directly from the TrueType specification and gets + * emulated for other formats. + * + * encoding_id :: + * A platform-specific encoding number. This also comes from the + * TrueType specification and gets emulated similarly. + */ + typedef struct FT_CharMapRec_ + { + FT_Face face; + FT_Encoding encoding; + FT_UShort platform_id; + FT_UShort encoding_id; + + } FT_CharMapRec; + + + /*************************************************************************/ + /*************************************************************************/ + /* */ + /* B A S E O B J E C T C L A S S E S */ + /* */ + /*************************************************************************/ + /*************************************************************************/ + + + /************************************************************************** + * + * @section: + * other_api_data + * + */ + + /************************************************************************** + * + * @type: + * FT_Face_Internal + * + * @description: + * An opaque handle to an `FT_Face_InternalRec` structure that models the + * private data of a given @FT_Face object. + * + * This structure might change between releases of FreeType~2 and is not + * generally available to client applications. + */ + typedef struct FT_Face_InternalRec_* FT_Face_Internal; + + + /************************************************************************** + * + * @section: + * face_creation + * + */ + + /************************************************************************** + * + * @struct: + * FT_FaceRec + * + * @description: + * FreeType root face class structure. A face object models a typeface + * in a font file. + * + * @fields: + * num_faces :: + * The number of faces in the font file. Some font formats can have + * multiple faces in a single font file. + * + * face_index :: + * This field holds two different values. Bits 0-15 are the index of + * the face in the font file (starting with value~0). They are set + * to~0 if there is only one face in the font file. + * + * [Since 2.6.1] Bits 16-30 are relevant to GX and OpenType variation + * fonts only, holding the named instance index for the current face + * index (starting with value~1; value~0 indicates font access without + * a named instance). For non-variation fonts, bits 16-30 are ignored. + * If we have the third named instance of face~4, say, `face_index` is + * set to 0x00030004. + * + * Bit 31 is always zero (that is, `face_index` is always a positive + * value). + * + * [Since 2.9] Changing the design coordinates with + * @FT_Set_Var_Design_Coordinates or @FT_Set_Var_Blend_Coordinates does + * not influence the named instance index value (only + * @FT_Set_Named_Instance does that). + * + * face_flags :: + * A set of bit flags that give important information about the face; + * see @FT_FACE_FLAG_XXX for the details. + * + * style_flags :: + * The lower 16~bits contain a set of bit flags indicating the style of + * the face; see @FT_STYLE_FLAG_XXX for the details. + * + * [Since 2.6.1] Bits 16-30 hold the number of named instances + * available for the current face if we have a GX or OpenType variation + * (sub)font. Bit 31 is always zero (that is, `style_flags` is always + * a positive value). Note that a variation font has always at least + * one named instance, namely the default instance. + * + * num_glyphs :: + * The number of glyphs in the face. If the face is scalable and has + * sbits (see `num_fixed_sizes`), it is set to the number of outline + * glyphs. + * + * For CID-keyed fonts (not in an SFNT wrapper) this value gives the + * highest CID used in the font. + * + * family_name :: + * The face's family name. This is an ASCII string, usually in + * English, that describes the typeface's family (like 'Times New + * Roman', 'Bodoni', 'Garamond', etc). This is a least common + * denominator used to list fonts. Some formats (TrueType & OpenType) + * provide localized and Unicode versions of this string. Applications + * should use the format-specific interface to access them. Can be + * `NULL` (e.g., in fonts embedded in a PDF file). + * + * In case the font doesn't provide a specific family name entry, + * FreeType tries to synthesize one, deriving it from other name + * entries. + * + * style_name :: + * The face's style name. This is an ASCII string, usually in English, + * that describes the typeface's style (like 'Italic', 'Bold', + * 'Condensed', etc). Not all font formats provide a style name, so + * this field is optional, and can be set to `NULL`. As for + * `family_name`, some formats provide localized and Unicode versions + * of this string. Applications should use the format-specific + * interface to access them. + * + * num_fixed_sizes :: + * The number of bitmap strikes in the face. Even if the face is + * scalable, there might still be bitmap strikes, which are called + * 'sbits' in that case. + * + * available_sizes :: + * An array of @FT_Bitmap_Size for all bitmap strikes in the face. It + * is set to `NULL` if there is no bitmap strike. + * + * Note that FreeType tries to sanitize the strike data since they are + * sometimes sloppy or incorrect, but this can easily fail. + * + * num_charmaps :: + * The number of charmaps in the face. + * + * charmaps :: + * An array of the charmaps of the face. + * + * generic :: + * A field reserved for client uses. See the @FT_Generic type + * description. + * + * bbox :: + * The font bounding box. Coordinates are expressed in font units (see + * `units_per_EM`). The box is large enough to contain any glyph from + * the font. Thus, `bbox.yMax` can be seen as the 'maximum ascender', + * and `bbox.yMin` as the 'minimum descender'. Only relevant for + * scalable formats. + * + * Note that the bounding box might be off by (at least) one pixel for + * hinted fonts. See @FT_Size_Metrics for further discussion. + * + * Note that the bounding box does not vary in OpenType variation fonts + * and should only be used in relation to the default instance. + * + * units_per_EM :: + * The number of font units per EM square for this face. This is + * typically 2048 for TrueType fonts, and 1000 for Type~1 fonts. Only + * relevant for scalable formats. + * + * ascender :: + * The typographic ascender of the face, expressed in font units. For + * font formats not having this information, it is set to `bbox.yMax`. + * Only relevant for scalable formats. + * + * descender :: + * The typographic descender of the face, expressed in font units. For + * font formats not having this information, it is set to `bbox.yMin`. + * Note that this field is negative for values below the baseline. + * Only relevant for scalable formats. + * + * height :: + * This value is the vertical distance between two consecutive + * baselines, expressed in font units. It is always positive. Only + * relevant for scalable formats. + * + * If you want the global glyph height, use `ascender - descender`. + * + * max_advance_width :: + * The maximum advance width, in font units, for all glyphs in this + * face. This can be used to make word wrapping computations faster. + * Only relevant for scalable formats. + * + * max_advance_height :: + * The maximum advance height, in font units, for all glyphs in this + * face. This is only relevant for vertical layouts, and is set to + * `height` for fonts that do not provide vertical metrics. Only + * relevant for scalable formats. + * + * underline_position :: + * The position, in font units, of the underline line for this face. + * It is the center of the underlining stem. Only relevant for + * scalable formats. + * + * underline_thickness :: + * The thickness, in font units, of the underline for this face. Only + * relevant for scalable formats. + * + * glyph :: + * The face's associated glyph slot(s). + * + * size :: + * The current active size for this face. + * + * charmap :: + * The current active charmap for this face. + * + * @note: + * Fields may be changed after a call to @FT_Attach_File or + * @FT_Attach_Stream. + * + * For an OpenType variation font, the values of the following fields can + * change after a call to @FT_Set_Var_Design_Coordinates (and friends) if + * the font contains an 'MVAR' table: `ascender`, `descender`, `height`, + * `underline_position`, and `underline_thickness`. + * + * Especially for TrueType fonts see also the documentation for + * @FT_Size_Metrics. + */ + typedef struct FT_FaceRec_ + { + FT_Long num_faces; + FT_Long face_index; + + FT_Long face_flags; + FT_Long style_flags; + + FT_Long num_glyphs; + + FT_String* family_name; + FT_String* style_name; + + FT_Int num_fixed_sizes; + FT_Bitmap_Size* available_sizes; + + FT_Int num_charmaps; + FT_CharMap* charmaps; + + FT_Generic generic; + + /* The following member variables (down to `underline_thickness`) */ + /* are only relevant to scalable outlines; cf. @FT_Bitmap_Size */ + /* for bitmap fonts. */ + FT_BBox bbox; + + FT_UShort units_per_EM; + FT_Short ascender; + FT_Short descender; + FT_Short height; + + FT_Short max_advance_width; + FT_Short max_advance_height; + + FT_Short underline_position; + FT_Short underline_thickness; + + FT_GlyphSlot glyph; + FT_Size size; + FT_CharMap charmap; + + /* private fields, internal to FreeType */ + + FT_Driver driver; + FT_Memory memory; + FT_Stream stream; + + FT_ListRec sizes_list; + + FT_Generic autohint; /* face-specific auto-hinter data */ + void* extensions; /* unused */ + + FT_Face_Internal internal; + + } FT_FaceRec; + + + /************************************************************************** + * + * @enum: + * FT_FACE_FLAG_XXX + * + * @description: + * A list of bit flags used in the `face_flags` field of the @FT_FaceRec + * structure. They inform client applications of properties of the + * corresponding face. + * + * @values: + * FT_FACE_FLAG_SCALABLE :: + * The face contains outline glyphs. Note that a face can contain + * bitmap strikes also, i.e., a face can have both this flag and + * @FT_FACE_FLAG_FIXED_SIZES set. + * + * FT_FACE_FLAG_FIXED_SIZES :: + * The face contains bitmap strikes. See also the `num_fixed_sizes` + * and `available_sizes` fields of @FT_FaceRec. + * + * FT_FACE_FLAG_FIXED_WIDTH :: + * The face contains fixed-width characters (like Courier, Lucida, + * MonoType, etc.). + * + * FT_FACE_FLAG_SFNT :: + * The face uses the SFNT storage scheme. For now, this means TrueType + * and OpenType. + * + * FT_FACE_FLAG_HORIZONTAL :: + * The face contains horizontal glyph metrics. This should be set for + * all common formats. + * + * FT_FACE_FLAG_VERTICAL :: + * The face contains vertical glyph metrics. This is only available in + * some formats, not all of them. + * + * FT_FACE_FLAG_KERNING :: + * The face contains kerning information. If set, the kerning distance + * can be retrieved using the function @FT_Get_Kerning. Otherwise the + * function always returns the vector (0,0). + * + * Note that for TrueType fonts only, FreeType supports both the 'kern' + * table and the basic, pair-wise kerning feature from the 'GPOS' table + * (with `TT_CONFIG_OPTION_GPOS_KERNING` enabled), though FreeType does + * not support the more advanced GPOS layout features; use a library + * like HarfBuzz for those instead. + * + * FT_FACE_FLAG_FAST_GLYPHS :: + * THIS FLAG IS DEPRECATED. DO NOT USE OR TEST IT. + * + * FT_FACE_FLAG_MULTIPLE_MASTERS :: + * The face contains multiple masters and is capable of interpolating + * between them. Supported formats are Adobe MM, TrueType GX, and + * OpenType variation fonts. + * + * See section @multiple_masters for API details. + * + * FT_FACE_FLAG_GLYPH_NAMES :: + * The face contains glyph names, which can be retrieved using + * @FT_Get_Glyph_Name. Note that some TrueType fonts contain broken + * glyph name tables. Use the function @FT_Has_PS_Glyph_Names when + * needed. + * + * FT_FACE_FLAG_EXTERNAL_STREAM :: + * Used internally by FreeType to indicate that a face's stream was + * provided by the client application and should not be destroyed when + * @FT_Done_Face is called. Don't read or test this flag. + * + * FT_FACE_FLAG_HINTER :: + * The font driver has a hinting machine of its own. For example, with + * TrueType fonts, it makes sense to use data from the SFNT 'gasp' + * table only if the native TrueType hinting engine (with the bytecode + * interpreter) is available and active. + * + * FT_FACE_FLAG_CID_KEYED :: + * The face is CID-keyed. In that case, the face is not accessed by + * glyph indices but by CID values. For subsetted CID-keyed fonts this + * has the consequence that not all index values are a valid argument + * to @FT_Load_Glyph. Only the CID values for which corresponding + * glyphs in the subsetted font exist make `FT_Load_Glyph` return + * successfully; in all other cases you get an + * `FT_Err_Invalid_Argument` error. + * + * Note that CID-keyed fonts that are in an SFNT wrapper (that is, all + * OpenType/CFF fonts) don't have this flag set since the glyphs are + * accessed in the normal way (using contiguous indices); the + * 'CID-ness' isn't visible to the application. + * + * FT_FACE_FLAG_TRICKY :: + * The face is 'tricky', that is, it always needs the font format's + * native hinting engine to get a reasonable result. A typical example + * is the old Chinese font `mingli.ttf` (but not `mingliu.ttc`) that + * uses TrueType bytecode instructions to move and scale all of its + * subglyphs. + * + * It is not possible to auto-hint such fonts using + * @FT_LOAD_FORCE_AUTOHINT; it will also ignore @FT_LOAD_NO_HINTING. + * You have to set both @FT_LOAD_NO_HINTING and @FT_LOAD_NO_AUTOHINT to + * really disable hinting; however, you probably never want this except + * for demonstration purposes. + * + * Currently, there are about a dozen TrueType fonts in the list of + * tricky fonts; they are hard-coded in file `ttobjs.c`. + * + * FT_FACE_FLAG_COLOR :: + * [Since 2.5.1] The face has color glyph tables. See @FT_LOAD_COLOR + * for more information. + * + * FT_FACE_FLAG_VARIATION :: + * [Since 2.9] Set if the current face (or named instance) has been + * altered with @FT_Set_MM_Design_Coordinates, + * @FT_Set_Var_Design_Coordinates, @FT_Set_Var_Blend_Coordinates, or + * @FT_Set_MM_WeightVector to select a non-default instance. + * + * FT_FACE_FLAG_SVG :: + * [Since 2.12] The face has an 'SVG~' OpenType table. + * + * FT_FACE_FLAG_SBIX :: + * [Since 2.12] The face has an 'sbix' OpenType table *and* outlines. + * For such fonts, @FT_FACE_FLAG_SCALABLE is not set by default to + * retain backward compatibility. + * + * FT_FACE_FLAG_SBIX_OVERLAY :: + * [Since 2.12] The face has an 'sbix' OpenType table where outlines + * should be drawn on top of bitmap strikes. + * + */ +#define FT_FACE_FLAG_SCALABLE ( 1L << 0 ) +#define FT_FACE_FLAG_FIXED_SIZES ( 1L << 1 ) +#define FT_FACE_FLAG_FIXED_WIDTH ( 1L << 2 ) +#define FT_FACE_FLAG_SFNT ( 1L << 3 ) +#define FT_FACE_FLAG_HORIZONTAL ( 1L << 4 ) +#define FT_FACE_FLAG_VERTICAL ( 1L << 5 ) +#define FT_FACE_FLAG_KERNING ( 1L << 6 ) +#define FT_FACE_FLAG_FAST_GLYPHS ( 1L << 7 ) +#define FT_FACE_FLAG_MULTIPLE_MASTERS ( 1L << 8 ) +#define FT_FACE_FLAG_GLYPH_NAMES ( 1L << 9 ) +#define FT_FACE_FLAG_EXTERNAL_STREAM ( 1L << 10 ) +#define FT_FACE_FLAG_HINTER ( 1L << 11 ) +#define FT_FACE_FLAG_CID_KEYED ( 1L << 12 ) +#define FT_FACE_FLAG_TRICKY ( 1L << 13 ) +#define FT_FACE_FLAG_COLOR ( 1L << 14 ) +#define FT_FACE_FLAG_VARIATION ( 1L << 15 ) +#define FT_FACE_FLAG_SVG ( 1L << 16 ) +#define FT_FACE_FLAG_SBIX ( 1L << 17 ) +#define FT_FACE_FLAG_SBIX_OVERLAY ( 1L << 18 ) + + + /************************************************************************** + * + * @section: + * font_testing_macros + * + */ + + /************************************************************************** + * + * @macro: + * FT_HAS_HORIZONTAL + * + * @description: + * A macro that returns true whenever a face object contains horizontal + * metrics (this is true for all font formats though). + * + * @also: + * @FT_HAS_VERTICAL can be used to check for vertical metrics. + * + */ +#define FT_HAS_HORIZONTAL( face ) \ + ( !!( (face)->face_flags & FT_FACE_FLAG_HORIZONTAL ) ) + + + /************************************************************************** + * + * @macro: + * FT_HAS_VERTICAL + * + * @description: + * A macro that returns true whenever a face object contains real + * vertical metrics (and not only synthesized ones). + * + */ +#define FT_HAS_VERTICAL( face ) \ + ( !!( (face)->face_flags & FT_FACE_FLAG_VERTICAL ) ) + + + /************************************************************************** + * + * @macro: + * FT_HAS_KERNING + * + * @description: + * A macro that returns true whenever a face object contains kerning data + * that can be accessed with @FT_Get_Kerning. + * + */ +#define FT_HAS_KERNING( face ) \ + ( !!( (face)->face_flags & FT_FACE_FLAG_KERNING ) ) + + + /************************************************************************** + * + * @macro: + * FT_IS_SCALABLE + * + * @description: + * A macro that returns true whenever a face object contains a scalable + * font face (true for TrueType, Type~1, Type~42, CID, OpenType/CFF, and + * PFR font formats). + * + */ +#define FT_IS_SCALABLE( face ) \ + ( !!( (face)->face_flags & FT_FACE_FLAG_SCALABLE ) ) + + + /************************************************************************** + * + * @macro: + * FT_IS_SFNT + * + * @description: + * A macro that returns true whenever a face object contains a font whose + * format is based on the SFNT storage scheme. This usually means: + * TrueType fonts, OpenType fonts, as well as SFNT-based embedded bitmap + * fonts. + * + * If this macro is true, all functions defined in @FT_SFNT_NAMES_H and + * @FT_TRUETYPE_TABLES_H are available. + * + */ +#define FT_IS_SFNT( face ) \ + ( !!( (face)->face_flags & FT_FACE_FLAG_SFNT ) ) + + + /************************************************************************** + * + * @macro: + * FT_IS_FIXED_WIDTH + * + * @description: + * A macro that returns true whenever a face object contains a font face + * that contains fixed-width (or 'monospace', 'fixed-pitch', etc.) + * glyphs. + * + */ +#define FT_IS_FIXED_WIDTH( face ) \ + ( !!( (face)->face_flags & FT_FACE_FLAG_FIXED_WIDTH ) ) + + + /************************************************************************** + * + * @macro: + * FT_HAS_FIXED_SIZES + * + * @description: + * A macro that returns true whenever a face object contains some + * embedded bitmaps. See the `available_sizes` field of the @FT_FaceRec + * structure. + * + */ +#define FT_HAS_FIXED_SIZES( face ) \ + ( !!( (face)->face_flags & FT_FACE_FLAG_FIXED_SIZES ) ) + + + /************************************************************************** + * + * @section: + * other_api_data + * + */ + + /************************************************************************** + * + * @macro: + * FT_HAS_FAST_GLYPHS + * + * @description: + * Deprecated. + * + */ +#define FT_HAS_FAST_GLYPHS( face ) 0 + + + /************************************************************************** + * + * @section: + * font_testing_macros + * + */ + + /************************************************************************** + * + * @macro: + * FT_HAS_GLYPH_NAMES + * + * @description: + * A macro that returns true whenever a face object contains some glyph + * names that can be accessed through @FT_Get_Glyph_Name. + * + */ +#define FT_HAS_GLYPH_NAMES( face ) \ + ( !!( (face)->face_flags & FT_FACE_FLAG_GLYPH_NAMES ) ) + + + /************************************************************************** + * + * @macro: + * FT_HAS_MULTIPLE_MASTERS + * + * @description: + * A macro that returns true whenever a face object contains some + * multiple masters. The functions provided by @FT_MULTIPLE_MASTERS_H + * are then available to choose the exact design you want. + * + */ +#define FT_HAS_MULTIPLE_MASTERS( face ) \ + ( !!( (face)->face_flags & FT_FACE_FLAG_MULTIPLE_MASTERS ) ) + + + /************************************************************************** + * + * @macro: + * FT_IS_NAMED_INSTANCE + * + * @description: + * A macro that returns true whenever a face object is a named instance + * of a GX or OpenType variation font. + * + * [Since 2.9] Changing the design coordinates with + * @FT_Set_Var_Design_Coordinates or @FT_Set_Var_Blend_Coordinates does + * not influence the return value of this macro (only + * @FT_Set_Named_Instance does that). + * + * @since: + * 2.7 + * + */ +#define FT_IS_NAMED_INSTANCE( face ) \ + ( !!( (face)->face_index & 0x7FFF0000L ) ) + + + /************************************************************************** + * + * @macro: + * FT_IS_VARIATION + * + * @description: + * A macro that returns true whenever a face object has been altered by + * @FT_Set_MM_Design_Coordinates, @FT_Set_Var_Design_Coordinates, + * @FT_Set_Var_Blend_Coordinates, or @FT_Set_MM_WeightVector. + * + * @since: + * 2.9 + * + */ +#define FT_IS_VARIATION( face ) \ + ( !!( (face)->face_flags & FT_FACE_FLAG_VARIATION ) ) + + + /************************************************************************** + * + * @macro: + * FT_IS_CID_KEYED + * + * @description: + * A macro that returns true whenever a face object contains a CID-keyed + * font. See the discussion of @FT_FACE_FLAG_CID_KEYED for more details. + * + * If this macro is true, all functions defined in @FT_CID_H are + * available. + * + */ +#define FT_IS_CID_KEYED( face ) \ + ( !!( (face)->face_flags & FT_FACE_FLAG_CID_KEYED ) ) + + + /************************************************************************** + * + * @macro: + * FT_IS_TRICKY + * + * @description: + * A macro that returns true whenever a face represents a 'tricky' font. + * See the discussion of @FT_FACE_FLAG_TRICKY for more details. + * + */ +#define FT_IS_TRICKY( face ) \ + ( !!( (face)->face_flags & FT_FACE_FLAG_TRICKY ) ) + + + /************************************************************************** + * + * @macro: + * FT_HAS_COLOR + * + * @description: + * A macro that returns true whenever a face object contains tables for + * color glyphs. + * + * @since: + * 2.5.1 + * + */ +#define FT_HAS_COLOR( face ) \ + ( !!( (face)->face_flags & FT_FACE_FLAG_COLOR ) ) + + + /************************************************************************** + * + * @macro: + * FT_HAS_SVG + * + * @description: + * A macro that returns true whenever a face object contains an 'SVG~' + * OpenType table. + * + * @since: + * 2.12 + */ +#define FT_HAS_SVG( face ) \ + ( !!( (face)->face_flags & FT_FACE_FLAG_SVG ) ) + + + /************************************************************************** + * + * @macro: + * FT_HAS_SBIX + * + * @description: + * A macro that returns true whenever a face object contains an 'sbix' + * OpenType table *and* outline glyphs. + * + * Currently, FreeType only supports bitmap glyphs in PNG format for this + * table (i.e., JPEG and TIFF formats are unsupported, as are + * Apple-specific formats not part of the OpenType specification). + * + * @note: + * For backward compatibility, a font with an 'sbix' table is treated as + * a bitmap-only face. Using @FT_Open_Face with + * @FT_PARAM_TAG_IGNORE_SBIX, an application can switch off 'sbix' + * handling so that the face is treated as an ordinary outline font with + * scalable outlines. + * + * Here is some pseudo code that roughly illustrates how to implement + * 'sbix' handling according to the OpenType specification. + * + * ``` + * if ( FT_HAS_SBIX( face ) ) + * { + * // open font as a scalable one without sbix handling + * FT_Face face2; + * FT_Parameter param = { FT_PARAM_TAG_IGNORE_SBIX, NULL }; + * FT_Open_Args args = { FT_OPEN_PARAMS | ..., + * ..., + * 1, ¶m }; + * + * + * FT_Open_Face( library, &args, 0, &face2 ); + * + * available_size` as necessary into + * `preferred_sizes`[*]> + * + * for ( i = 0; i < face->num_fixed_sizes; i++ ) + * { + * size = preferred_sizes[i].size; + * + * error = FT_Set_Pixel_Sizes( face, size, size ); + * + * + * // check whether we have a glyph in a bitmap strike + * error = FT_Load_Glyph( face, + * glyph_index, + * FT_LOAD_SBITS_ONLY | + * FT_LOAD_BITMAP_METRICS_ONLY ); + * if ( error == FT_Err_Invalid_Argument ) + * continue; + * else if ( error ) + * + * else + * break; + * } + * + * if ( i != face->num_fixed_sizes ) + * + * + * if ( i == face->num_fixed_sizes || + * FT_HAS_SBIX_OVERLAY( face ) ) + * + * } + * ``` + * + * [*] Assuming a target value of 400dpi and available strike sizes 100, + * 200, 300, and 400dpi, a possible order might be [400, 200, 300, 100]: + * scaling 200dpi to 400dpi usually gives better results than scaling + * 300dpi to 400dpi; it is also much faster. However, scaling 100dpi to + * 400dpi can yield a too pixelated result, thus the preference might be + * 300dpi over 100dpi. + * + * @since: + * 2.12 + */ +#define FT_HAS_SBIX( face ) \ + ( !!( (face)->face_flags & FT_FACE_FLAG_SBIX ) ) + + + /************************************************************************** + * + * @macro: + * FT_HAS_SBIX_OVERLAY + * + * @description: + * A macro that returns true whenever a face object contains an 'sbix' + * OpenType table with bit~1 in its `flags` field set, instructing the + * application to overlay the bitmap strike with the corresponding + * outline glyph. See @FT_HAS_SBIX for pseudo code how to use it. + * + * @since: + * 2.12 + */ +#define FT_HAS_SBIX_OVERLAY( face ) \ + ( !!( (face)->face_flags & FT_FACE_FLAG_SBIX_OVERLAY ) ) + + + /************************************************************************** + * + * @section: + * face_creation + * + */ + + /************************************************************************** + * + * @enum: + * FT_STYLE_FLAG_XXX + * + * @description: + * A list of bit flags to indicate the style of a given face. These are + * used in the `style_flags` field of @FT_FaceRec. + * + * @values: + * FT_STYLE_FLAG_ITALIC :: + * The face style is italic or oblique. + * + * FT_STYLE_FLAG_BOLD :: + * The face is bold. + * + * @note: + * The style information as provided by FreeType is very basic. More + * details are beyond the scope and should be done on a higher level (for + * example, by analyzing various fields of the 'OS/2' table in SFNT based + * fonts). + */ +#define FT_STYLE_FLAG_ITALIC ( 1 << 0 ) +#define FT_STYLE_FLAG_BOLD ( 1 << 1 ) + + + /************************************************************************** + * + * @section: + * other_api_data + * + */ + + /************************************************************************** + * + * @type: + * FT_Size_Internal + * + * @description: + * An opaque handle to an `FT_Size_InternalRec` structure, used to model + * private data of a given @FT_Size object. + */ + typedef struct FT_Size_InternalRec_* FT_Size_Internal; + + + /************************************************************************** + * + * @section: + * sizing_and_scaling + * + */ + + /************************************************************************** + * + * @struct: + * FT_Size_Metrics + * + * @description: + * The size metrics structure gives the metrics of a size object. + * + * @fields: + * x_ppem :: + * The width of the scaled EM square in pixels, hence the term 'ppem' + * (pixels per EM). It is also referred to as 'nominal width'. + * + * y_ppem :: + * The height of the scaled EM square in pixels, hence the term 'ppem' + * (pixels per EM). It is also referred to as 'nominal height'. + * + * x_scale :: + * A 16.16 fractional scaling value to convert horizontal metrics from + * font units to 26.6 fractional pixels. Only relevant for scalable + * font formats. + * + * y_scale :: + * A 16.16 fractional scaling value to convert vertical metrics from + * font units to 26.6 fractional pixels. Only relevant for scalable + * font formats. + * + * ascender :: + * The ascender in 26.6 fractional pixels, rounded up to an integer + * value. See @FT_FaceRec for the details. + * + * descender :: + * The descender in 26.6 fractional pixels, rounded down to an integer + * value. See @FT_FaceRec for the details. + * + * height :: + * The height in 26.6 fractional pixels, rounded to an integer value. + * See @FT_FaceRec for the details. + * + * max_advance :: + * The maximum advance width in 26.6 fractional pixels, rounded to an + * integer value. See @FT_FaceRec for the details. + * + * @note: + * The scaling values, if relevant, are determined first during a size + * changing operation. The remaining fields are then set by the driver. + * For scalable formats, they are usually set to scaled values of the + * corresponding fields in @FT_FaceRec. Some values like ascender or + * descender are rounded for historical reasons; more precise values (for + * outline fonts) can be derived by scaling the corresponding @FT_FaceRec + * values manually, with code similar to the following. + * + * ``` + * scaled_ascender = FT_MulFix( face->ascender, + * size_metrics->y_scale ); + * ``` + * + * Note that due to glyph hinting and the selected rendering mode these + * values are usually not exact; consequently, they must be treated as + * unreliable with an error margin of at least one pixel! + * + * Indeed, the only way to get the exact metrics is to render _all_ + * glyphs. As this would be a definite performance hit, it is up to + * client applications to perform such computations. + * + * The `FT_Size_Metrics` structure is valid for bitmap fonts also. + * + * + * **TrueType fonts with native bytecode hinting** + * + * All applications that handle TrueType fonts with native hinting must + * be aware that TTFs expect different rounding of vertical font + * dimensions. The application has to cater for this, especially if it + * wants to rely on a TTF's vertical data (for example, to properly align + * box characters vertically). + * + * Only the application knows _in advance_ that it is going to use native + * hinting for TTFs! FreeType, on the other hand, selects the hinting + * mode not at the time of creating an @FT_Size object but much later, + * namely while calling @FT_Load_Glyph. + * + * Here is some pseudo code that illustrates a possible solution. + * + * ``` + * font_format = FT_Get_Font_Format( face ); + * + * if ( !strcmp( font_format, "TrueType" ) && + * do_native_bytecode_hinting ) + * { + * ascender = ROUND( FT_MulFix( face->ascender, + * size_metrics->y_scale ) ); + * descender = ROUND( FT_MulFix( face->descender, + * size_metrics->y_scale ) ); + * } + * else + * { + * ascender = size_metrics->ascender; + * descender = size_metrics->descender; + * } + * + * height = size_metrics->height; + * max_advance = size_metrics->max_advance; + * ``` + */ + typedef struct FT_Size_Metrics_ + { + FT_UShort x_ppem; /* horizontal pixels per EM */ + FT_UShort y_ppem; /* vertical pixels per EM */ + + FT_Fixed x_scale; /* scaling values used to convert font */ + FT_Fixed y_scale; /* units to 26.6 fractional pixels */ + + FT_Pos ascender; /* ascender in 26.6 frac. pixels */ + FT_Pos descender; /* descender in 26.6 frac. pixels */ + FT_Pos height; /* text height in 26.6 frac. pixels */ + FT_Pos max_advance; /* max horizontal advance, in 26.6 pixels */ + + } FT_Size_Metrics; + + + /************************************************************************** + * + * @struct: + * FT_SizeRec + * + * @description: + * FreeType root size class structure. A size object models a face + * object at a given size. + * + * @fields: + * face :: + * Handle to the parent face object. + * + * generic :: + * A typeless pointer, unused by the FreeType library or any of its + * drivers. It can be used by client applications to link their own + * data to each size object. + * + * metrics :: + * Metrics for this size object. This field is read-only. + */ + typedef struct FT_SizeRec_ + { + FT_Face face; /* parent face object */ + FT_Generic generic; /* generic pointer for client uses */ + FT_Size_Metrics metrics; /* size metrics */ + FT_Size_Internal internal; + + } FT_SizeRec; + + + /************************************************************************** + * + * @section: + * other_api_data + * + */ + + /************************************************************************** + * + * @struct: + * FT_SubGlyph + * + * @description: + * The subglyph structure is an internal object used to describe + * subglyphs (for example, in the case of composites). + * + * @note: + * The subglyph implementation is not part of the high-level API, hence + * the forward structure declaration. + * + * You can however retrieve subglyph information with + * @FT_Get_SubGlyph_Info. + */ + typedef struct FT_SubGlyphRec_* FT_SubGlyph; + + + /************************************************************************** + * + * @type: + * FT_Slot_Internal + * + * @description: + * An opaque handle to an `FT_Slot_InternalRec` structure, used to model + * private data of a given @FT_GlyphSlot object. + */ + typedef struct FT_Slot_InternalRec_* FT_Slot_Internal; + + + /************************************************************************** + * + * @section: + * glyph_retrieval + * + */ + + /************************************************************************** + * + * @struct: + * FT_GlyphSlotRec + * + * @description: + * FreeType root glyph slot class structure. A glyph slot is a container + * where individual glyphs can be loaded, be they in outline or bitmap + * format. + * + * @fields: + * library :: + * A handle to the FreeType library instance this slot belongs to. + * + * face :: + * A handle to the parent face object. + * + * next :: + * In some cases (like some font tools), several glyph slots per face + * object can be a good thing. As this is rare, the glyph slots are + * listed through a direct, single-linked list using its `next` field. + * + * glyph_index :: + * [Since 2.10] The glyph index passed as an argument to @FT_Load_Glyph + * while initializing the glyph slot. + * + * generic :: + * A typeless pointer unused by the FreeType library or any of its + * drivers. It can be used by client applications to link their own + * data to each glyph slot object. + * + * metrics :: + * The metrics of the last loaded glyph in the slot. The returned + * values depend on the last load flags (see the @FT_Load_Glyph API + * function) and can be expressed either in 26.6 fractional pixels or + * font units. + * + * Note that even when the glyph image is transformed, the metrics are + * not. + * + * linearHoriAdvance :: + * The advance width of the unhinted glyph. Its value is expressed in + * 16.16 fractional pixels, unless @FT_LOAD_LINEAR_DESIGN is set when + * loading the glyph. This field can be important to perform correct + * WYSIWYG layout. Only relevant for scalable glyphs. + * + * linearVertAdvance :: + * The advance height of the unhinted glyph. Its value is expressed in + * 16.16 fractional pixels, unless @FT_LOAD_LINEAR_DESIGN is set when + * loading the glyph. This field can be important to perform correct + * WYSIWYG layout. Only relevant for scalable glyphs. + * + * advance :: + * This shorthand is, depending on @FT_LOAD_IGNORE_TRANSFORM, the + * transformed (hinted) advance width for the glyph, in 26.6 fractional + * pixel format. As specified with @FT_LOAD_VERTICAL_LAYOUT, it uses + * either the `horiAdvance` or the `vertAdvance` value of `metrics` + * field. + * + * format :: + * This field indicates the format of the image contained in the glyph + * slot. Typically @FT_GLYPH_FORMAT_BITMAP, @FT_GLYPH_FORMAT_OUTLINE, + * or @FT_GLYPH_FORMAT_COMPOSITE, but other values are possible. + * + * bitmap :: + * This field is used as a bitmap descriptor. Note that the address + * and content of the bitmap buffer can change between calls of + * @FT_Load_Glyph and a few other functions. + * + * bitmap_left :: + * The bitmap's left bearing expressed in integer pixels. + * + * bitmap_top :: + * The bitmap's top bearing expressed in integer pixels. This is the + * distance from the baseline to the top-most glyph scanline, upwards + * y~coordinates being **positive**. + * + * outline :: + * The outline descriptor for the current glyph image if its format is + * @FT_GLYPH_FORMAT_OUTLINE. Once a glyph is loaded, `outline` can be + * transformed, distorted, emboldened, etc. However, it must not be + * freed. + * + * [Since 2.10.1] If @FT_LOAD_NO_SCALE is set, outline coordinates of + * OpenType variation fonts for a selected instance are internally + * handled as 26.6 fractional font units but returned as (rounded) + * integers, as expected. To get unrounded font units, don't use + * @FT_LOAD_NO_SCALE but load the glyph with @FT_LOAD_NO_HINTING and + * scale it, using the font's `units_per_EM` value as the ppem. + * + * num_subglyphs :: + * The number of subglyphs in a composite glyph. This field is only + * valid for the composite glyph format that should normally only be + * loaded with the @FT_LOAD_NO_RECURSE flag. + * + * subglyphs :: + * An array of subglyph descriptors for composite glyphs. There are + * `num_subglyphs` elements in there. Currently internal to FreeType. + * + * control_data :: + * Certain font drivers can also return the control data for a given + * glyph image (e.g. TrueType bytecode, Type~1 charstrings, etc.). + * This field is a pointer to such data; it is currently internal to + * FreeType. + * + * control_len :: + * This is the length in bytes of the control data. Currently internal + * to FreeType. + * + * other :: + * Reserved. + * + * lsb_delta :: + * The difference between hinted and unhinted left side bearing while + * auto-hinting is active. Zero otherwise. + * + * rsb_delta :: + * The difference between hinted and unhinted right side bearing while + * auto-hinting is active. Zero otherwise. + * + * @note: + * If @FT_Load_Glyph is called with default flags (see @FT_LOAD_DEFAULT) + * the glyph image is loaded in the glyph slot in its native format + * (e.g., an outline glyph for TrueType and Type~1 formats). [Since 2.9] + * The prospective bitmap metrics are calculated according to + * @FT_LOAD_TARGET_XXX and other flags even for the outline glyph, even + * if @FT_LOAD_RENDER is not set. + * + * This image can later be converted into a bitmap by calling + * @FT_Render_Glyph. This function searches the current renderer for the + * native image's format, then invokes it. + * + * The renderer is in charge of transforming the native image through the + * slot's face transformation fields, then converting it into a bitmap + * that is returned in `slot->bitmap`. + * + * Note that `slot->bitmap_left` and `slot->bitmap_top` are also used to + * specify the position of the bitmap relative to the current pen + * position (e.g., coordinates (0,0) on the baseline). Of course, + * `slot->format` is also changed to @FT_GLYPH_FORMAT_BITMAP. + * + * Here is a small pseudo code fragment that shows how to use `lsb_delta` + * and `rsb_delta` to do fractional positioning of glyphs: + * + * ``` + * FT_GlyphSlot slot = face->glyph; + * FT_Pos origin_x = 0; + * + * + * for all glyphs do + * + * + * FT_Outline_Translate( slot->outline, origin_x & 63, 0 ); + * + * + * + * + * + * origin_x += slot->advance.x; + * origin_x += slot->lsb_delta - slot->rsb_delta; + * endfor + * ``` + * + * Here is another small pseudo code fragment that shows how to use + * `lsb_delta` and `rsb_delta` to improve integer positioning of glyphs: + * + * ``` + * FT_GlyphSlot slot = face->glyph; + * FT_Pos origin_x = 0; + * FT_Pos prev_rsb_delta = 0; + * + * + * for all glyphs do + * + * + * + * + * if ( prev_rsb_delta - slot->lsb_delta > 32 ) + * origin_x -= 64; + * else if ( prev_rsb_delta - slot->lsb_delta < -31 ) + * origin_x += 64; + * + * prev_rsb_delta = slot->rsb_delta; + * + * + * + * origin_x += slot->advance.x; + * endfor + * ``` + * + * If you use strong auto-hinting, you **must** apply these delta values! + * Otherwise you will experience far too large inter-glyph spacing at + * small rendering sizes in most cases. Note that it doesn't harm to use + * the above code for other hinting modes also, since the delta values + * are zero then. + */ + typedef struct FT_GlyphSlotRec_ + { + FT_Library library; + FT_Face face; + FT_GlyphSlot next; + FT_UInt glyph_index; /* new in 2.10; was reserved previously */ + FT_Generic generic; + + FT_Glyph_Metrics metrics; + FT_Fixed linearHoriAdvance; + FT_Fixed linearVertAdvance; + FT_Vector advance; + + FT_Glyph_Format format; + + FT_Bitmap bitmap; + FT_Int bitmap_left; + FT_Int bitmap_top; + + FT_Outline outline; + + FT_UInt num_subglyphs; + FT_SubGlyph subglyphs; + + void* control_data; + long control_len; + + FT_Pos lsb_delta; + FT_Pos rsb_delta; + + void* other; + + FT_Slot_Internal internal; + + } FT_GlyphSlotRec; + + + /*************************************************************************/ + /*************************************************************************/ + /* */ + /* F U N C T I O N S */ + /* */ + /*************************************************************************/ + /*************************************************************************/ + + + /************************************************************************** + * + * @section: + * library_setup + * + */ + + /************************************************************************** + * + * @function: + * FT_Init_FreeType + * + * @description: + * Initialize a new FreeType library object. The set of modules that are + * registered by this function is determined at build time. + * + * @output: + * alibrary :: + * A handle to a new library object. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * In case you want to provide your own memory allocating routines, use + * @FT_New_Library instead, followed by a call to @FT_Add_Default_Modules + * (or a series of calls to @FT_Add_Module) and + * @FT_Set_Default_Properties. + * + * See the documentation of @FT_Library and @FT_Face for multi-threading + * issues. + * + * If you need reference-counting (cf. @FT_Reference_Library), use + * @FT_New_Library and @FT_Done_Library. + * + * If compilation option `FT_CONFIG_OPTION_ENVIRONMENT_PROPERTIES` is + * set, this function reads the `FREETYPE_PROPERTIES` environment + * variable to control driver properties. See section @properties for + * more. + */ + FT_EXPORT( FT_Error ) + FT_Init_FreeType( FT_Library *alibrary ); + + + /************************************************************************** + * + * @function: + * FT_Done_FreeType + * + * @description: + * Destroy a given FreeType library object and all of its children, + * including resources, drivers, faces, sizes, etc. + * + * @input: + * library :: + * A handle to the target library object. + * + * @return: + * FreeType error code. 0~means success. + */ + FT_EXPORT( FT_Error ) + FT_Done_FreeType( FT_Library library ); + + + /************************************************************************** + * + * @section: + * face_creation + * + */ + + /************************************************************************** + * + * @enum: + * FT_OPEN_XXX + * + * @description: + * A list of bit field constants used within the `flags` field of the + * @FT_Open_Args structure. + * + * @values: + * FT_OPEN_MEMORY :: + * This is a memory-based stream. + * + * FT_OPEN_STREAM :: + * Copy the stream from the `stream` field. + * + * FT_OPEN_PATHNAME :: + * Create a new input stream from a C~path name. + * + * FT_OPEN_DRIVER :: + * Use the `driver` field. + * + * FT_OPEN_PARAMS :: + * Use the `num_params` and `params` fields. + * + * @note: + * The `FT_OPEN_MEMORY`, `FT_OPEN_STREAM`, and `FT_OPEN_PATHNAME` flags + * are mutually exclusive. + */ +#define FT_OPEN_MEMORY 0x1 +#define FT_OPEN_STREAM 0x2 +#define FT_OPEN_PATHNAME 0x4 +#define FT_OPEN_DRIVER 0x8 +#define FT_OPEN_PARAMS 0x10 + + + /* these constants are deprecated; use the corresponding `FT_OPEN_XXX` */ + /* values instead */ +#define ft_open_memory FT_OPEN_MEMORY +#define ft_open_stream FT_OPEN_STREAM +#define ft_open_pathname FT_OPEN_PATHNAME +#define ft_open_driver FT_OPEN_DRIVER +#define ft_open_params FT_OPEN_PARAMS + + + /************************************************************************** + * + * @struct: + * FT_Parameter + * + * @description: + * A simple structure to pass more or less generic parameters to + * @FT_Open_Face and @FT_Face_Properties. + * + * @fields: + * tag :: + * A four-byte identification tag. + * + * data :: + * A pointer to the parameter data. + * + * @note: + * The ID and function of parameters are driver-specific. See section + * @parameter_tags for more information. + */ + typedef struct FT_Parameter_ + { + FT_ULong tag; + FT_Pointer data; + + } FT_Parameter; + + + /************************************************************************** + * + * @struct: + * FT_Open_Args + * + * @description: + * A structure to indicate how to open a new font file or stream. A + * pointer to such a structure can be used as a parameter for the + * functions @FT_Open_Face and @FT_Attach_Stream. + * + * @fields: + * flags :: + * A set of bit flags indicating how to use the structure. + * + * memory_base :: + * The first byte of the file in memory. + * + * memory_size :: + * The size in bytes of the file in memory. + * + * pathname :: + * A pointer to an 8-bit file pathname, which must be a C~string (i.e., + * no null bytes except at the very end). The pointer is not owned by + * FreeType. + * + * stream :: + * A handle to a source stream object. + * + * driver :: + * This field is exclusively used by @FT_Open_Face; it simply specifies + * the font driver to use for opening the face. If set to `NULL`, + * FreeType tries to load the face with each one of the drivers in its + * list. + * + * num_params :: + * The number of extra parameters. + * + * params :: + * Extra parameters passed to the font driver when opening a new face. + * + * @note: + * The stream type is determined by the contents of `flags`: + * + * If the @FT_OPEN_MEMORY bit is set, assume that this is a memory file + * of `memory_size` bytes, located at `memory_address`. The data are not + * copied, and the client is responsible for releasing and destroying + * them _after_ the corresponding call to @FT_Done_Face. + * + * Otherwise, if the @FT_OPEN_STREAM bit is set, assume that a custom + * input stream `stream` is used. + * + * Otherwise, if the @FT_OPEN_PATHNAME bit is set, assume that this is a + * normal file and use `pathname` to open it. + * + * If none of the above bits are set or if multiple are set at the same + * time, the flags are invalid and @FT_Open_Face fails. + * + * If the @FT_OPEN_DRIVER bit is set, @FT_Open_Face only tries to open + * the file with the driver whose handler is in `driver`. + * + * If the @FT_OPEN_PARAMS bit is set, the parameters given by + * `num_params` and `params` is used. They are ignored otherwise. + * + * Ideally, both the `pathname` and `params` fields should be tagged as + * 'const'; this is missing for API backward compatibility. In other + * words, applications should treat them as read-only. + */ + typedef struct FT_Open_Args_ + { + FT_UInt flags; + const FT_Byte* memory_base; + FT_Long memory_size; + FT_String* pathname; + FT_Stream stream; + FT_Module driver; + FT_Int num_params; + FT_Parameter* params; + + } FT_Open_Args; + + + /************************************************************************** + * + * @function: + * FT_New_Face + * + * @description: + * Call @FT_Open_Face to open a font by its pathname. + * + * @inout: + * library :: + * A handle to the library resource. + * + * @input: + * pathname :: + * A path to the font file. + * + * face_index :: + * See @FT_Open_Face for a detailed description of this parameter. + * + * @output: + * aface :: + * A handle to a new face object. If `face_index` is greater than or + * equal to zero, it must be non-`NULL`. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * The `pathname` string should be recognizable as such by a standard + * `fopen` call on your system; in particular, this means that `pathname` + * must not contain null bytes. If that is not sufficient to address all + * file name possibilities (for example, to handle wide character file + * names on Windows in UTF-16 encoding) you might use @FT_Open_Face to + * pass a memory array or a stream object instead. + * + * Use @FT_Done_Face to destroy the created @FT_Face object (along with + * its slot and sizes). + */ + FT_EXPORT( FT_Error ) + FT_New_Face( FT_Library library, + const char* filepathname, + FT_Long face_index, + FT_Face *aface ); + + + /************************************************************************** + * + * @function: + * FT_New_Memory_Face + * + * @description: + * Call @FT_Open_Face to open a font that has been loaded into memory. + * + * @inout: + * library :: + * A handle to the library resource. + * + * @input: + * file_base :: + * A pointer to the beginning of the font data. + * + * file_size :: + * The size of the memory chunk used by the font data. + * + * face_index :: + * See @FT_Open_Face for a detailed description of this parameter. + * + * @output: + * aface :: + * A handle to a new face object. If `face_index` is greater than or + * equal to zero, it must be non-`NULL`. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * You must not deallocate the memory before calling @FT_Done_Face. + */ + FT_EXPORT( FT_Error ) + FT_New_Memory_Face( FT_Library library, + const FT_Byte* file_base, + FT_Long file_size, + FT_Long face_index, + FT_Face *aface ); + + + /************************************************************************** + * + * @function: + * FT_Open_Face + * + * @description: + * Create a face object from a given resource described by @FT_Open_Args. + * + * @inout: + * library :: + * A handle to the library resource. + * + * @input: + * args :: + * A pointer to an `FT_Open_Args` structure that must be filled by the + * caller. + * + * face_index :: + * This field holds two different values. Bits 0-15 are the index of + * the face in the font file (starting with value~0). Set it to~0 if + * there is only one face in the font file. + * + * [Since 2.6.1] Bits 16-30 are relevant to GX and OpenType variation + * fonts only, specifying the named instance index for the current face + * index (starting with value~1; value~0 makes FreeType ignore named + * instances). For non-variation fonts, bits 16-30 are ignored. + * Assuming that you want to access the third named instance in face~4, + * `face_index` should be set to 0x00030004. If you want to access + * face~4 without variation handling, simply set `face_index` to + * value~4. + * + * `FT_Open_Face` and its siblings can be used to quickly check whether + * the font format of a given font resource is supported by FreeType. + * In general, if the `face_index` argument is negative, the function's + * return value is~0 if the font format is recognized, or non-zero + * otherwise. The function allocates a more or less empty face handle + * in `*aface` (if `aface` isn't `NULL`); the only two useful fields in + * this special case are `face->num_faces` and `face->style_flags`. + * For any negative value of `face_index`, `face->num_faces` gives the + * number of faces within the font file. For the negative value + * '-(N+1)' (with 'N' a non-negative 16-bit value), bits 16-30 in + * `face->style_flags` give the number of named instances in face 'N' + * if we have a variation font (or zero otherwise). After examination, + * the returned @FT_Face structure should be deallocated with a call to + * @FT_Done_Face. + * + * @output: + * aface :: + * A handle to a new face object. If `face_index` is greater than or + * equal to zero, it must be non-`NULL`. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * Unlike FreeType 1.x, this function automatically creates a glyph slot + * for the face object that can be accessed directly through + * `face->glyph`. + * + * Each new face object created with this function also owns a default + * @FT_Size object, accessible as `face->size`. + * + * One @FT_Library instance can have multiple face objects, that is, + * @FT_Open_Face and its siblings can be called multiple times using the + * same `library` argument. + * + * See the discussion of reference counters in the description of + * @FT_Reference_Face. + * + * If `FT_OPEN_STREAM` is set in `args->flags`, the stream in + * `args->stream` is automatically closed before this function returns + * any error (including `FT_Err_Invalid_Argument`). + * + * @example: + * To loop over all faces, use code similar to the following snippet + * (omitting the error handling). + * + * ``` + * ... + * FT_Face face; + * FT_Long i, num_faces; + * + * + * error = FT_Open_Face( library, args, -1, &face ); + * if ( error ) { ... } + * + * num_faces = face->num_faces; + * FT_Done_Face( face ); + * + * for ( i = 0; i < num_faces; i++ ) + * { + * ... + * error = FT_Open_Face( library, args, i, &face ); + * ... + * FT_Done_Face( face ); + * ... + * } + * ``` + * + * To loop over all valid values for `face_index`, use something similar + * to the following snippet, again without error handling. The code + * accesses all faces immediately (thus only a single call of + * `FT_Open_Face` within the do-loop), with and without named instances. + * + * ``` + * ... + * FT_Face face; + * + * FT_Long num_faces = 0; + * FT_Long num_instances = 0; + * + * FT_Long face_idx = 0; + * FT_Long instance_idx = 0; + * + * + * do + * { + * FT_Long id = ( instance_idx << 16 ) + face_idx; + * + * + * error = FT_Open_Face( library, args, id, &face ); + * if ( error ) { ... } + * + * num_faces = face->num_faces; + * num_instances = face->style_flags >> 16; + * + * ... + * + * FT_Done_Face( face ); + * + * if ( instance_idx < num_instances ) + * instance_idx++; + * else + * { + * face_idx++; + * instance_idx = 0; + * } + * + * } while ( face_idx < num_faces ) + * ``` + */ + FT_EXPORT( FT_Error ) + FT_Open_Face( FT_Library library, + const FT_Open_Args* args, + FT_Long face_index, + FT_Face *aface ); + + + /************************************************************************** + * + * @function: + * FT_Attach_File + * + * @description: + * Call @FT_Attach_Stream to attach a file. + * + * @inout: + * face :: + * The target face object. + * + * @input: + * filepathname :: + * The pathname. + * + * @return: + * FreeType error code. 0~means success. + */ + FT_EXPORT( FT_Error ) + FT_Attach_File( FT_Face face, + const char* filepathname ); + + + /************************************************************************** + * + * @function: + * FT_Attach_Stream + * + * @description: + * 'Attach' data to a face object. Normally, this is used to read + * additional information for the face object. For example, you can + * attach an AFM file that comes with a Type~1 font to get the kerning + * values and other metrics. + * + * @inout: + * face :: + * The target face object. + * + * @input: + * parameters :: + * A pointer to @FT_Open_Args that must be filled by the caller. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * The meaning of the 'attach' (i.e., what really happens when the new + * file is read) is not fixed by FreeType itself. It really depends on + * the font format (and thus the font driver). + * + * Client applications are expected to know what they are doing when + * invoking this function. Most drivers simply do not implement file or + * stream attachments. + */ + FT_EXPORT( FT_Error ) + FT_Attach_Stream( FT_Face face, + const FT_Open_Args* parameters ); + + + /************************************************************************** + * + * @function: + * FT_Reference_Face + * + * @description: + * A counter gets initialized to~1 at the time an @FT_Face structure is + * created. This function increments the counter. @FT_Done_Face then + * only destroys a face if the counter is~1, otherwise it simply + * decrements the counter. + * + * This function helps in managing life-cycles of structures that + * reference @FT_Face objects. + * + * @input: + * face :: + * A handle to a target face object. + * + * @return: + * FreeType error code. 0~means success. + * + * @since: + * 2.4.2 + * + */ + FT_EXPORT( FT_Error ) + FT_Reference_Face( FT_Face face ); + + + /************************************************************************** + * + * @function: + * FT_Done_Face + * + * @description: + * Discard a given face object, as well as all of its child slots and + * sizes. + * + * @input: + * face :: + * A handle to a target face object. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * See the discussion of reference counters in the description of + * @FT_Reference_Face. + */ + FT_EXPORT( FT_Error ) + FT_Done_Face( FT_Face face ); + + + /************************************************************************** + * + * @section: + * sizing_and_scaling + * + */ + + /************************************************************************** + * + * @function: + * FT_Select_Size + * + * @description: + * Select a bitmap strike. To be more precise, this function sets the + * scaling factors of the active @FT_Size object in a face so that + * bitmaps from this particular strike are taken by @FT_Load_Glyph and + * friends. + * + * @inout: + * face :: + * A handle to a target face object. + * + * @input: + * strike_index :: + * The index of the bitmap strike in the `available_sizes` field of + * @FT_FaceRec structure. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * For bitmaps embedded in outline fonts it is common that only a subset + * of the available glyphs at a given ppem value is available. FreeType + * silently uses outlines if there is no bitmap for a given glyph index. + * + * For GX and OpenType variation fonts, a bitmap strike makes sense only + * if the default instance is active (that is, no glyph variation takes + * place); otherwise, FreeType simply ignores bitmap strikes. The same + * is true for all named instances that are different from the default + * instance. + * + * Don't use this function if you are using the FreeType cache API. + */ + FT_EXPORT( FT_Error ) + FT_Select_Size( FT_Face face, + FT_Int strike_index ); + + + /************************************************************************** + * + * @enum: + * FT_Size_Request_Type + * + * @description: + * An enumeration type that lists the supported size request types, i.e., + * what input size (in font units) maps to the requested output size (in + * pixels, as computed from the arguments of @FT_Size_Request). + * + * @values: + * FT_SIZE_REQUEST_TYPE_NOMINAL :: + * The nominal size. The `units_per_EM` field of @FT_FaceRec is used + * to determine both scaling values. + * + * This is the standard scaling found in most applications. In + * particular, use this size request type for TrueType fonts if they + * provide optical scaling or something similar. Note, however, that + * `units_per_EM` is a rather abstract value which bears no relation to + * the actual size of the glyphs in a font. + * + * FT_SIZE_REQUEST_TYPE_REAL_DIM :: + * The real dimension. The sum of the `ascender` and (minus of) the + * `descender` fields of @FT_FaceRec is used to determine both scaling + * values. + * + * FT_SIZE_REQUEST_TYPE_BBOX :: + * The font bounding box. The width and height of the `bbox` field of + * @FT_FaceRec are used to determine the horizontal and vertical + * scaling value, respectively. + * + * FT_SIZE_REQUEST_TYPE_CELL :: + * The `max_advance_width` field of @FT_FaceRec is used to determine + * the horizontal scaling value; the vertical scaling value is + * determined the same way as @FT_SIZE_REQUEST_TYPE_REAL_DIM does. + * Finally, both scaling values are set to the smaller one. This type + * is useful if you want to specify the font size for, say, a window of + * a given dimension and 80x24 cells. + * + * FT_SIZE_REQUEST_TYPE_SCALES :: + * Specify the scaling values directly. + * + * @note: + * The above descriptions only apply to scalable formats. For bitmap + * formats, the behaviour is up to the driver. + * + * See the note section of @FT_Size_Metrics if you wonder how size + * requesting relates to scaling values. + */ + typedef enum FT_Size_Request_Type_ + { + FT_SIZE_REQUEST_TYPE_NOMINAL, + FT_SIZE_REQUEST_TYPE_REAL_DIM, + FT_SIZE_REQUEST_TYPE_BBOX, + FT_SIZE_REQUEST_TYPE_CELL, + FT_SIZE_REQUEST_TYPE_SCALES, + + FT_SIZE_REQUEST_TYPE_MAX + + } FT_Size_Request_Type; + + + /************************************************************************** + * + * @struct: + * FT_Size_RequestRec + * + * @description: + * A structure to model a size request. + * + * @fields: + * type :: + * See @FT_Size_Request_Type. + * + * width :: + * The desired width, given as a 26.6 fractional point value (with 72pt + * = 1in). + * + * height :: + * The desired height, given as a 26.6 fractional point value (with + * 72pt = 1in). + * + * horiResolution :: + * The horizontal resolution (dpi, i.e., pixels per inch). If set to + * zero, `width` is treated as a 26.6 fractional **pixel** value, which + * gets internally rounded to an integer. + * + * vertResolution :: + * The vertical resolution (dpi, i.e., pixels per inch). If set to + * zero, `height` is treated as a 26.6 fractional **pixel** value, + * which gets internally rounded to an integer. + * + * @note: + * If `width` is zero, the horizontal scaling value is set equal to the + * vertical scaling value, and vice versa. + * + * If `type` is `FT_SIZE_REQUEST_TYPE_SCALES`, `width` and `height` are + * interpreted directly as 16.16 fractional scaling values, without any + * further modification, and both `horiResolution` and `vertResolution` + * are ignored. + */ + typedef struct FT_Size_RequestRec_ + { + FT_Size_Request_Type type; + FT_Long width; + FT_Long height; + FT_UInt horiResolution; + FT_UInt vertResolution; + + } FT_Size_RequestRec; + + + /************************************************************************** + * + * @struct: + * FT_Size_Request + * + * @description: + * A handle to a size request structure. + */ + typedef struct FT_Size_RequestRec_ *FT_Size_Request; + + + /************************************************************************** + * + * @function: + * FT_Request_Size + * + * @description: + * Resize the scale of the active @FT_Size object in a face. + * + * @inout: + * face :: + * A handle to a target face object. + * + * @input: + * req :: + * A pointer to a @FT_Size_RequestRec. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * Although drivers may select the bitmap strike matching the request, + * you should not rely on this if you intend to select a particular + * bitmap strike. Use @FT_Select_Size instead in that case. + * + * The relation between the requested size and the resulting glyph size + * is dependent entirely on how the size is defined in the source face. + * The font designer chooses the final size of each glyph relative to + * this size. For more information refer to + * 'https://freetype.org/freetype2/docs/glyphs/glyphs-2.html'. + * + * Contrary to @FT_Set_Char_Size, this function doesn't have special code + * to normalize zero-valued widths, heights, or resolutions, which are + * treated as @FT_LOAD_NO_SCALE. + * + * Don't use this function if you are using the FreeType cache API. + */ + FT_EXPORT( FT_Error ) + FT_Request_Size( FT_Face face, + FT_Size_Request req ); + + + /************************************************************************** + * + * @function: + * FT_Set_Char_Size + * + * @description: + * Call @FT_Request_Size to request the nominal size (in points). + * + * @inout: + * face :: + * A handle to a target face object. + * + * @input: + * char_width :: + * The nominal width, in 26.6 fractional points. + * + * char_height :: + * The nominal height, in 26.6 fractional points. + * + * horz_resolution :: + * The horizontal resolution in dpi. + * + * vert_resolution :: + * The vertical resolution in dpi. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * While this function allows fractional points as input values, the + * resulting ppem value for the given resolution is always rounded to the + * nearest integer. + * + * If either the character width or height is zero, it is set equal to + * the other value. + * + * If either the horizontal or vertical resolution is zero, it is set + * equal to the other value. + * + * A character width or height smaller than 1pt is set to 1pt; if both + * resolution values are zero, they are set to 72dpi. + * + * Don't use this function if you are using the FreeType cache API. + */ + FT_EXPORT( FT_Error ) + FT_Set_Char_Size( FT_Face face, + FT_F26Dot6 char_width, + FT_F26Dot6 char_height, + FT_UInt horz_resolution, + FT_UInt vert_resolution ); + + + /************************************************************************** + * + * @function: + * FT_Set_Pixel_Sizes + * + * @description: + * Call @FT_Request_Size to request the nominal size (in pixels). + * + * @inout: + * face :: + * A handle to the target face object. + * + * @input: + * pixel_width :: + * The nominal width, in pixels. + * + * pixel_height :: + * The nominal height, in pixels. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * You should not rely on the resulting glyphs matching or being + * constrained to this pixel size. Refer to @FT_Request_Size to + * understand how requested sizes relate to actual sizes. + * + * Don't use this function if you are using the FreeType cache API. + */ + FT_EXPORT( FT_Error ) + FT_Set_Pixel_Sizes( FT_Face face, + FT_UInt pixel_width, + FT_UInt pixel_height ); + + + /************************************************************************** + * + * @section: + * glyph_retrieval + * + */ + + /************************************************************************** + * + * @function: + * FT_Load_Glyph + * + * @description: + * Load a glyph into the glyph slot of a face object. + * + * @inout: + * face :: + * A handle to the target face object where the glyph is loaded. + * + * @input: + * glyph_index :: + * The index of the glyph in the font file. For CID-keyed fonts + * (either in PS or in CFF format) this argument specifies the CID + * value. + * + * load_flags :: + * A flag indicating what to load for this glyph. The @FT_LOAD_XXX + * flags can be used to control the glyph loading process (e.g., + * whether the outline should be scaled, whether to load bitmaps or + * not, whether to hint the outline, etc). + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * For proper scaling and hinting, the active @FT_Size object owned by + * the face has to be meaningfully initialized by calling + * @FT_Set_Char_Size before this function, for example. The loaded + * glyph may be transformed. See @FT_Set_Transform for the details. + * + * For subsetted CID-keyed fonts, `FT_Err_Invalid_Argument` is returned + * for invalid CID values (that is, for CID values that don't have a + * corresponding glyph in the font). See the discussion of the + * @FT_FACE_FLAG_CID_KEYED flag for more details. + * + * If you receive `FT_Err_Glyph_Too_Big`, try getting the glyph outline + * at EM size, then scale it manually and fill it as a graphics + * operation. + */ + FT_EXPORT( FT_Error ) + FT_Load_Glyph( FT_Face face, + FT_UInt glyph_index, + FT_Int32 load_flags ); + + + /************************************************************************** + * + * @section: + * character_mapping + * + */ + + /************************************************************************** + * + * @function: + * FT_Load_Char + * + * @description: + * Load a glyph into the glyph slot of a face object, accessed by its + * character code. + * + * @inout: + * face :: + * A handle to a target face object where the glyph is loaded. + * + * @input: + * char_code :: + * The glyph's character code, according to the current charmap used in + * the face. + * + * load_flags :: + * A flag indicating what to load for this glyph. The @FT_LOAD_XXX + * constants can be used to control the glyph loading process (e.g., + * whether the outline should be scaled, whether to load bitmaps or + * not, whether to hint the outline, etc). + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * This function simply calls @FT_Get_Char_Index and @FT_Load_Glyph. + * + * Many fonts contain glyphs that can't be loaded by this function since + * its glyph indices are not listed in any of the font's charmaps. + * + * If no active cmap is set up (i.e., `face->charmap` is zero), the call + * to @FT_Get_Char_Index is omitted, and the function behaves identically + * to @FT_Load_Glyph. + */ + FT_EXPORT( FT_Error ) + FT_Load_Char( FT_Face face, + FT_ULong char_code, + FT_Int32 load_flags ); + + + /************************************************************************** + * + * @section: + * glyph_retrieval + * + */ + + /************************************************************************** + * + * @enum: + * FT_LOAD_XXX + * + * @description: + * A list of bit field constants for @FT_Load_Glyph to indicate what kind + * of operations to perform during glyph loading. + * + * @values: + * FT_LOAD_DEFAULT :: + * Corresponding to~0, this value is used as the default glyph load + * operation. In this case, the following happens: + * + * 1. FreeType looks for a bitmap for the glyph corresponding to the + * face's current size. If one is found, the function returns. The + * bitmap data can be accessed from the glyph slot (see note below). + * + * 2. If no embedded bitmap is searched for or found, FreeType looks + * for a scalable outline. If one is found, it is loaded from the font + * file, scaled to device pixels, then 'hinted' to the pixel grid in + * order to optimize it. The outline data can be accessed from the + * glyph slot (see note below). + * + * Note that by default the glyph loader doesn't render outlines into + * bitmaps. The following flags are used to modify this default + * behaviour to more specific and useful cases. + * + * FT_LOAD_NO_SCALE :: + * Don't scale the loaded outline glyph but keep it in font units. + * This flag is also assumed if @FT_Size owned by the face was not + * properly initialized. + * + * This flag implies @FT_LOAD_NO_HINTING and @FT_LOAD_NO_BITMAP, and + * unsets @FT_LOAD_RENDER. + * + * If the font is 'tricky' (see @FT_FACE_FLAG_TRICKY for more), using + * `FT_LOAD_NO_SCALE` usually yields meaningless outlines because the + * subglyphs must be scaled and positioned with hinting instructions. + * This can be solved by loading the font without `FT_LOAD_NO_SCALE` + * and setting the character size to `font->units_per_EM`. + * + * FT_LOAD_NO_HINTING :: + * Disable hinting. This generally generates 'blurrier' bitmap glyphs + * when the glyphs are rendered in any of the anti-aliased modes. See + * also the note below. + * + * This flag is implied by @FT_LOAD_NO_SCALE. + * + * FT_LOAD_RENDER :: + * Call @FT_Render_Glyph after the glyph is loaded. By default, the + * glyph is rendered in @FT_RENDER_MODE_NORMAL mode. This can be + * overridden by @FT_LOAD_TARGET_XXX or @FT_LOAD_MONOCHROME. + * + * This flag is unset by @FT_LOAD_NO_SCALE. + * + * FT_LOAD_NO_BITMAP :: + * Ignore bitmap strikes when loading. Bitmap-only fonts ignore this + * flag. + * + * @FT_LOAD_NO_SCALE always sets this flag. + * + * FT_LOAD_SBITS_ONLY :: + * [Since 2.12] This is the opposite of @FT_LOAD_NO_BITMAP, more or + * less: @FT_Load_Glyph returns `FT_Err_Invalid_Argument` if the face + * contains a bitmap strike for the given size (or the strike selected + * by @FT_Select_Size) but there is no glyph in the strike. + * + * Note that this load flag was part of FreeType since version 2.0.6 + * but previously tagged as internal. + * + * FT_LOAD_VERTICAL_LAYOUT :: + * Load the glyph for vertical text layout. In particular, the + * `advance` value in the @FT_GlyphSlotRec structure is set to the + * `vertAdvance` value of the `metrics` field. + * + * In case @FT_HAS_VERTICAL doesn't return true, you shouldn't use this + * flag currently. Reason is that in this case vertical metrics get + * synthesized, and those values are not always consistent across + * various font formats. + * + * FT_LOAD_FORCE_AUTOHINT :: + * Prefer the auto-hinter over the font's native hinter. See also the + * note below. + * + * FT_LOAD_PEDANTIC :: + * Make the font driver perform pedantic verifications during glyph + * loading and hinting. This is mostly used to detect broken glyphs in + * fonts. By default, FreeType tries to handle broken fonts also. + * + * In particular, errors from the TrueType bytecode engine are not + * passed to the application if this flag is not set; this might result + * in partially hinted or distorted glyphs in case a glyph's bytecode + * is buggy. + * + * FT_LOAD_NO_RECURSE :: + * Don't load composite glyphs recursively. Instead, the font driver + * fills the `num_subglyph` and `subglyphs` values of the glyph slot; + * it also sets `glyph->format` to @FT_GLYPH_FORMAT_COMPOSITE. The + * description of subglyphs can then be accessed with + * @FT_Get_SubGlyph_Info. + * + * Don't use this flag for retrieving metrics information since some + * font drivers only return rudimentary data. + * + * This flag implies @FT_LOAD_NO_SCALE and @FT_LOAD_IGNORE_TRANSFORM. + * + * FT_LOAD_IGNORE_TRANSFORM :: + * Ignore the transform matrix set by @FT_Set_Transform. + * + * FT_LOAD_MONOCHROME :: + * This flag is used with @FT_LOAD_RENDER to indicate that you want to + * render an outline glyph to a 1-bit monochrome bitmap glyph, with + * 8~pixels packed into each byte of the bitmap data. + * + * Note that this has no effect on the hinting algorithm used. You + * should rather use @FT_LOAD_TARGET_MONO so that the + * monochrome-optimized hinting algorithm is used. + * + * FT_LOAD_LINEAR_DESIGN :: + * Keep `linearHoriAdvance` and `linearVertAdvance` fields of + * @FT_GlyphSlotRec in font units. See @FT_GlyphSlotRec for details. + * + * FT_LOAD_NO_AUTOHINT :: + * Disable the auto-hinter. See also the note below. + * + * FT_LOAD_COLOR :: + * Load colored glyphs. FreeType searches in the following order; + * there are slight differences depending on the font format. + * + * [Since 2.5] Load embedded color bitmap images (provided + * @FT_LOAD_NO_BITMAP is not set). The resulting color bitmaps, if + * available, have the @FT_PIXEL_MODE_BGRA format, with pre-multiplied + * color channels. If the flag is not set and color bitmaps are found, + * they are converted to 256-level gray bitmaps, using the + * @FT_PIXEL_MODE_GRAY format. + * + * [Since 2.12] If the glyph index maps to an entry in the face's + * 'SVG~' table, load the associated SVG document from this table and + * set the `format` field of @FT_GlyphSlotRec to @FT_GLYPH_FORMAT_SVG + * ([since 2.13.1] provided @FT_LOAD_NO_SVG is not set). Note that + * FreeType itself can't render SVG documents; however, the library + * provides hooks to seamlessly integrate an external renderer. See + * sections @ot_svg_driver and @svg_fonts for more. + * + * [Since 2.10, experimental] If the glyph index maps to an entry in + * the face's 'COLR' table with a 'CPAL' palette table (as defined in + * the OpenType specification), make @FT_Render_Glyph provide a default + * blending of the color glyph layers associated with the glyph index, + * using the same bitmap format as embedded color bitmap images. This + * is mainly for convenience and works only for glyphs in 'COLR' v0 + * tables. **There is no rendering support for 'COLR' v1** (with the + * exception of v1 tables that exclusively use v0 features)! You need + * a graphics library like Skia or Cairo to interpret the graphics + * commands stored in v1 tables. For full control of color layers use + * @FT_Get_Color_Glyph_Layer and FreeType's color functions like + * @FT_Palette_Select instead of setting @FT_LOAD_COLOR for rendering + * so that the client application can handle blending by itself. + * + * FT_LOAD_NO_SVG :: + * [Since 2.13.1] Ignore SVG glyph data when loading. + * + * FT_LOAD_COMPUTE_METRICS :: + * [Since 2.6.1] Compute glyph metrics from the glyph data, without the + * use of bundled metrics tables (for example, the 'hdmx' table in + * TrueType fonts). This flag is mainly used by font validating or + * font editing applications, which need to ignore, verify, or edit + * those tables. + * + * Currently, this flag is only implemented for TrueType fonts. + * + * FT_LOAD_BITMAP_METRICS_ONLY :: + * [Since 2.7.1] Request loading of the metrics and bitmap image + * information of a (possibly embedded) bitmap glyph without allocating + * or copying the bitmap image data itself. No effect if the target + * glyph is not a bitmap image. + * + * This flag unsets @FT_LOAD_RENDER. + * + * FT_LOAD_CROP_BITMAP :: + * Ignored. Deprecated. + * + * FT_LOAD_IGNORE_GLOBAL_ADVANCE_WIDTH :: + * Ignored. Deprecated. + * + * @note: + * By default, hinting is enabled and the font's native hinter (see + * @FT_FACE_FLAG_HINTER) is preferred over the auto-hinter. You can + * disable hinting by setting @FT_LOAD_NO_HINTING or change the + * precedence by setting @FT_LOAD_FORCE_AUTOHINT. You can also set + * @FT_LOAD_NO_AUTOHINT in case you don't want the auto-hinter to be used + * at all. + * + * See the description of @FT_FACE_FLAG_TRICKY for a special exception + * (affecting only a handful of Asian fonts). + * + * Besides deciding which hinter to use, you can also decide which + * hinting algorithm to use. See @FT_LOAD_TARGET_XXX for details. + * + * Note that the auto-hinter needs a valid Unicode cmap (either a native + * one or synthesized by FreeType) for producing correct results. If a + * font provides an incorrect mapping (for example, assigning the + * character code U+005A, LATIN CAPITAL LETTER~Z, to a glyph depicting a + * mathematical integral sign), the auto-hinter might produce useless + * results. + * + */ +#define FT_LOAD_DEFAULT 0x0 +#define FT_LOAD_NO_SCALE ( 1L << 0 ) +#define FT_LOAD_NO_HINTING ( 1L << 1 ) +#define FT_LOAD_RENDER ( 1L << 2 ) +#define FT_LOAD_NO_BITMAP ( 1L << 3 ) +#define FT_LOAD_VERTICAL_LAYOUT ( 1L << 4 ) +#define FT_LOAD_FORCE_AUTOHINT ( 1L << 5 ) +#define FT_LOAD_CROP_BITMAP ( 1L << 6 ) +#define FT_LOAD_PEDANTIC ( 1L << 7 ) +#define FT_LOAD_IGNORE_GLOBAL_ADVANCE_WIDTH ( 1L << 9 ) +#define FT_LOAD_NO_RECURSE ( 1L << 10 ) +#define FT_LOAD_IGNORE_TRANSFORM ( 1L << 11 ) +#define FT_LOAD_MONOCHROME ( 1L << 12 ) +#define FT_LOAD_LINEAR_DESIGN ( 1L << 13 ) +#define FT_LOAD_SBITS_ONLY ( 1L << 14 ) +#define FT_LOAD_NO_AUTOHINT ( 1L << 15 ) + /* Bits 16-19 are used by `FT_LOAD_TARGET_` */ +#define FT_LOAD_COLOR ( 1L << 20 ) +#define FT_LOAD_COMPUTE_METRICS ( 1L << 21 ) +#define FT_LOAD_BITMAP_METRICS_ONLY ( 1L << 22 ) +#define FT_LOAD_NO_SVG ( 1L << 24 ) + + /* */ + + /* used internally only by certain font drivers */ +#define FT_LOAD_ADVANCE_ONLY ( 1L << 8 ) +#define FT_LOAD_SVG_ONLY ( 1L << 23 ) + + + /************************************************************************** + * + * @enum: + * FT_LOAD_TARGET_XXX + * + * @description: + * A list of values to select a specific hinting algorithm for the + * hinter. You should OR one of these values to your `load_flags` when + * calling @FT_Load_Glyph. + * + * Note that a font's native hinters may ignore the hinting algorithm you + * have specified (e.g., the TrueType bytecode interpreter). You can set + * @FT_LOAD_FORCE_AUTOHINT to ensure that the auto-hinter is used. + * + * @values: + * FT_LOAD_TARGET_NORMAL :: + * The default hinting algorithm, optimized for standard gray-level + * rendering. For monochrome output, use @FT_LOAD_TARGET_MONO instead. + * + * FT_LOAD_TARGET_LIGHT :: + * A lighter hinting algorithm for gray-level modes. Many generated + * glyphs are fuzzier but better resemble their original shape. This + * is achieved by snapping glyphs to the pixel grid only vertically + * (Y-axis), as is done by FreeType's new CFF engine or Microsoft's + * ClearType font renderer. This preserves inter-glyph spacing in + * horizontal text. The snapping is done either by the native font + * driver, if the driver itself and the font support it, or by the + * auto-hinter. + * + * Advance widths are rounded to integer values; however, using the + * `lsb_delta` and `rsb_delta` fields of @FT_GlyphSlotRec, it is + * possible to get fractional advance widths for subpixel positioning + * (which is recommended to use). + * + * If configuration option `AF_CONFIG_OPTION_TT_SIZE_METRICS` is + * active, TrueType-like metrics are used to make this mode behave + * similarly as in unpatched FreeType versions between 2.4.6 and 2.7.1 + * (inclusive). + * + * FT_LOAD_TARGET_MONO :: + * Strong hinting algorithm that should only be used for monochrome + * output. The result is probably unpleasant if the glyph is rendered + * in non-monochrome modes. + * + * Note that for outline fonts only the TrueType font driver has proper + * monochrome hinting support, provided the TTFs contain hints for B/W + * rendering (which most fonts no longer provide). If these conditions + * are not met it is very likely that you get ugly results at smaller + * sizes. + * + * FT_LOAD_TARGET_LCD :: + * A variant of @FT_LOAD_TARGET_LIGHT optimized for horizontally + * decimated LCD displays. + * + * FT_LOAD_TARGET_LCD_V :: + * A variant of @FT_LOAD_TARGET_NORMAL optimized for vertically + * decimated LCD displays. + * + * @note: + * You should use only _one_ of the `FT_LOAD_TARGET_XXX` values in your + * `load_flags`. They can't be ORed. + * + * If @FT_LOAD_RENDER is also set, the glyph is rendered in the + * corresponding mode (i.e., the mode that matches the used algorithm + * best). An exception is `FT_LOAD_TARGET_MONO` since it implies + * @FT_LOAD_MONOCHROME. + * + * You can use a hinting algorithm that doesn't correspond to the same + * rendering mode. As an example, it is possible to use the 'light' + * hinting algorithm and have the results rendered in horizontal LCD + * pixel mode, with code like + * + * ``` + * FT_Load_Glyph( face, glyph_index, + * load_flags | FT_LOAD_TARGET_LIGHT ); + * + * FT_Render_Glyph( face->glyph, FT_RENDER_MODE_LCD ); + * ``` + * + * In general, you should stick with one rendering mode. For example, + * switching between @FT_LOAD_TARGET_NORMAL and @FT_LOAD_TARGET_MONO + * enforces a lot of recomputation for TrueType fonts, which is slow. + * Another reason is caching: Selecting a different mode usually causes + * changes in both the outlines and the rasterized bitmaps; it is thus + * necessary to empty the cache after a mode switch to avoid false hits. + * + */ +#define FT_LOAD_TARGET_( x ) ( FT_STATIC_CAST( FT_Int32, (x) & 15 ) << 16 ) + +#define FT_LOAD_TARGET_NORMAL FT_LOAD_TARGET_( FT_RENDER_MODE_NORMAL ) +#define FT_LOAD_TARGET_LIGHT FT_LOAD_TARGET_( FT_RENDER_MODE_LIGHT ) +#define FT_LOAD_TARGET_MONO FT_LOAD_TARGET_( FT_RENDER_MODE_MONO ) +#define FT_LOAD_TARGET_LCD FT_LOAD_TARGET_( FT_RENDER_MODE_LCD ) +#define FT_LOAD_TARGET_LCD_V FT_LOAD_TARGET_( FT_RENDER_MODE_LCD_V ) + + + /************************************************************************** + * + * @macro: + * FT_LOAD_TARGET_MODE + * + * @description: + * Return the @FT_Render_Mode corresponding to a given + * @FT_LOAD_TARGET_XXX value. + * + */ +#define FT_LOAD_TARGET_MODE( x ) \ + FT_STATIC_CAST( FT_Render_Mode, ( (x) >> 16 ) & 15 ) + + + /************************************************************************** + * + * @section: + * sizing_and_scaling + * + */ + + /************************************************************************** + * + * @function: + * FT_Set_Transform + * + * @description: + * Set the transformation that is applied to glyph images when they are + * loaded into a glyph slot through @FT_Load_Glyph. + * + * @inout: + * face :: + * A handle to the source face object. + * + * @input: + * matrix :: + * A pointer to the transformation's 2x2 matrix. Use `NULL` for the + * identity matrix. + * delta :: + * A pointer to the translation vector. Use `NULL` for the null + * vector. + * + * @note: + * This function is provided as a convenience, but keep in mind that + * @FT_Matrix coefficients are only 16.16 fixed-point values, which can + * limit the accuracy of the results. Using floating-point computations + * to perform the transform directly in client code instead will always + * yield better numbers. + * + * The transformation is only applied to scalable image formats after the + * glyph has been loaded. It means that hinting is unaltered by the + * transformation and is performed on the character size given in the + * last call to @FT_Set_Char_Size or @FT_Set_Pixel_Sizes. + * + * Note that this also transforms the `face.glyph.advance` field, but + * **not** the values in `face.glyph.metrics`. + */ + FT_EXPORT( void ) + FT_Set_Transform( FT_Face face, + FT_Matrix* matrix, + FT_Vector* delta ); + + + /************************************************************************** + * + * @function: + * FT_Get_Transform + * + * @description: + * Return the transformation that is applied to glyph images when they + * are loaded into a glyph slot through @FT_Load_Glyph. See + * @FT_Set_Transform for more details. + * + * @input: + * face :: + * A handle to the source face object. + * + * @output: + * matrix :: + * A pointer to a transformation's 2x2 matrix. Set this to NULL if you + * are not interested in the value. + * + * delta :: + * A pointer to a translation vector. Set this to NULL if you are not + * interested in the value. + * + * @since: + * 2.11 + * + */ + FT_EXPORT( void ) + FT_Get_Transform( FT_Face face, + FT_Matrix* matrix, + FT_Vector* delta ); + + + /************************************************************************** + * + * @section: + * glyph_retrieval + * + */ + + /************************************************************************** + * + * @enum: + * FT_Render_Mode + * + * @description: + * Render modes supported by FreeType~2. Each mode corresponds to a + * specific type of scanline conversion performed on the outline. + * + * For bitmap fonts and embedded bitmaps the `bitmap->pixel_mode` field + * in the @FT_GlyphSlotRec structure gives the format of the returned + * bitmap. + * + * All modes except @FT_RENDER_MODE_MONO use 256 levels of opacity, + * indicating pixel coverage. Use linear alpha blending and gamma + * correction to correctly render non-monochrome glyph bitmaps onto a + * surface; see @FT_Render_Glyph. + * + * The @FT_RENDER_MODE_SDF is a special render mode that uses up to 256 + * distance values, indicating the signed distance from the grid position + * to the nearest outline. + * + * @values: + * FT_RENDER_MODE_NORMAL :: + * Default render mode; it corresponds to 8-bit anti-aliased bitmaps. + * + * FT_RENDER_MODE_LIGHT :: + * This is equivalent to @FT_RENDER_MODE_NORMAL. It is only defined as + * a separate value because render modes are also used indirectly to + * define hinting algorithm selectors. See @FT_LOAD_TARGET_XXX for + * details. + * + * FT_RENDER_MODE_MONO :: + * This mode corresponds to 1-bit bitmaps (with 2~levels of opacity). + * + * FT_RENDER_MODE_LCD :: + * This mode corresponds to horizontal RGB and BGR subpixel displays + * like LCD screens. It produces 8-bit bitmaps that are 3~times the + * width of the original glyph outline in pixels, and which use the + * @FT_PIXEL_MODE_LCD mode. + * + * FT_RENDER_MODE_LCD_V :: + * This mode corresponds to vertical RGB and BGR subpixel displays + * (like PDA screens, rotated LCD displays, etc.). It produces 8-bit + * bitmaps that are 3~times the height of the original glyph outline in + * pixels and use the @FT_PIXEL_MODE_LCD_V mode. + * + * FT_RENDER_MODE_SDF :: + * The positive (unsigned) 8-bit bitmap values can be converted to the + * single-channel signed distance field (SDF) by subtracting 128, with + * the positive and negative results corresponding to the inside and + * the outside of a glyph contour, respectively. The distance units are + * arbitrarily determined by an adjustable @spread property. + * + * @note: + * The selected render mode only affects scalable vector glyphs of a font. + * Embedded bitmaps often have a different pixel mode like + * @FT_PIXEL_MODE_MONO. You can use @FT_Bitmap_Convert to transform them + * into 8-bit pixmaps. + * + */ + typedef enum FT_Render_Mode_ + { + FT_RENDER_MODE_NORMAL = 0, + FT_RENDER_MODE_LIGHT, + FT_RENDER_MODE_MONO, + FT_RENDER_MODE_LCD, + FT_RENDER_MODE_LCD_V, + FT_RENDER_MODE_SDF, + + FT_RENDER_MODE_MAX + + } FT_Render_Mode; + + + /* these constants are deprecated; use the corresponding */ + /* `FT_Render_Mode` values instead */ +#define ft_render_mode_normal FT_RENDER_MODE_NORMAL +#define ft_render_mode_mono FT_RENDER_MODE_MONO + + + /************************************************************************** + * + * @function: + * FT_Render_Glyph + * + * @description: + * Convert a given glyph image to a bitmap. It does so by inspecting the + * glyph image format, finding the relevant renderer, and invoking it. + * + * @inout: + * slot :: + * A handle to the glyph slot containing the image to convert. + * + * @input: + * render_mode :: + * The render mode used to render the glyph image into a bitmap. See + * @FT_Render_Mode for a list of possible values. + * + * If @FT_RENDER_MODE_NORMAL is used, a previous call of @FT_Load_Glyph + * with flag @FT_LOAD_COLOR makes `FT_Render_Glyph` provide a default + * blending of colored glyph layers associated with the current glyph + * slot (provided the font contains such layers) instead of rendering + * the glyph slot's outline. This is an experimental feature; see + * @FT_LOAD_COLOR for more information. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * When FreeType outputs a bitmap of a glyph, it really outputs an alpha + * coverage map. If a pixel is completely covered by a filled-in + * outline, the bitmap contains 0xFF at that pixel, meaning that + * 0xFF/0xFF fraction of that pixel is covered, meaning the pixel is 100% + * black (or 0% bright). If a pixel is only 50% covered (value 0x80), + * the pixel is made 50% black (50% bright or a middle shade of grey). + * 0% covered means 0% black (100% bright or white). + * + * On high-DPI screens like on smartphones and tablets, the pixels are so + * small that their chance of being completely covered and therefore + * completely black are fairly good. On the low-DPI screens, however, + * the situation is different. The pixels are too large for most of the + * details of a glyph and shades of gray are the norm rather than the + * exception. + * + * This is relevant because all our screens have a second problem: they + * are not linear. 1~+~1 is not~2. Twice the value does not result in + * twice the brightness. When a pixel is only 50% covered, the coverage + * map says 50% black, and this translates to a pixel value of 128 when + * you use 8~bits per channel (0-255). However, this does not translate + * to 50% brightness for that pixel on our sRGB and gamma~2.2 screens. + * Due to their non-linearity, they dwell longer in the darks and only a + * pixel value of about 186 results in 50% brightness -- 128 ends up too + * dark on both bright and dark backgrounds. The net result is that dark + * text looks burnt-out, pixely and blotchy on bright background, bright + * text too frail on dark backgrounds, and colored text on colored + * background (for example, red on green) seems to have dark halos or + * 'dirt' around it. The situation is especially ugly for diagonal stems + * like in 'w' glyph shapes where the quality of FreeType's anti-aliasing + * depends on the correct display of grays. On high-DPI screens where + * smaller, fully black pixels reign supreme, this doesn't matter, but on + * our low-DPI screens with all the gray shades, it does. 0% and 100% + * brightness are the same things in linear and non-linear space, just + * all the shades in-between aren't. + * + * The blending function for placing text over a background is + * + * ``` + * dst = alpha * src + (1 - alpha) * dst , + * ``` + * + * which is known as the OVER operator. + * + * To correctly composite an anti-aliased pixel of a glyph onto a + * surface, + * + * 1. take the foreground and background colors (e.g., in sRGB space) + * and apply gamma to get them in a linear space, + * + * 2. use OVER to blend the two linear colors using the glyph pixel + * as the alpha value (remember, the glyph bitmap is an alpha coverage + * bitmap), and + * + * 3. apply inverse gamma to the blended pixel and write it back to + * the image. + * + * Internal testing at Adobe found that a target inverse gamma of~1.8 for + * step~3 gives good results across a wide range of displays with an sRGB + * gamma curve or a similar one. + * + * This process can cost performance. There is an approximation that + * does not need to know about the background color; see + * https://web.archive.org/web/20211019204945/https://bel.fi/alankila/lcd/ + * and + * https://web.archive.org/web/20210211002939/https://bel.fi/alankila/lcd/alpcor.html + * for details. + * + * **ATTENTION**: Linear blending is even more important when dealing + * with subpixel-rendered glyphs to prevent color-fringing! A + * subpixel-rendered glyph must first be filtered with a filter that + * gives equal weight to the three color primaries and does not exceed a + * sum of 0x100, see section @lcd_rendering. Then the only difference to + * gray linear blending is that subpixel-rendered linear blending is done + * 3~times per pixel: red foreground subpixel to red background subpixel + * and so on for green and blue. + */ + FT_EXPORT( FT_Error ) + FT_Render_Glyph( FT_GlyphSlot slot, + FT_Render_Mode render_mode ); + + + /************************************************************************** + * + * @enum: + * FT_Kerning_Mode + * + * @description: + * An enumeration to specify the format of kerning values returned by + * @FT_Get_Kerning. + * + * @values: + * FT_KERNING_DEFAULT :: + * Return grid-fitted kerning distances in 26.6 fractional pixels. + * + * FT_KERNING_UNFITTED :: + * Return un-grid-fitted kerning distances in 26.6 fractional pixels. + * + * FT_KERNING_UNSCALED :: + * Return the kerning vector in original font units. + * + * @note: + * `FT_KERNING_DEFAULT` returns full pixel values; it also makes FreeType + * heuristically scale down kerning distances at small ppem values so + * that they don't become too big. + * + * Both `FT_KERNING_DEFAULT` and `FT_KERNING_UNFITTED` use the current + * horizontal scaling factor (as set e.g. with @FT_Set_Char_Size) to + * convert font units to pixels. + */ + typedef enum FT_Kerning_Mode_ + { + FT_KERNING_DEFAULT = 0, + FT_KERNING_UNFITTED, + FT_KERNING_UNSCALED + + } FT_Kerning_Mode; + + + /* these constants are deprecated; use the corresponding */ + /* `FT_Kerning_Mode` values instead */ +#define ft_kerning_default FT_KERNING_DEFAULT +#define ft_kerning_unfitted FT_KERNING_UNFITTED +#define ft_kerning_unscaled FT_KERNING_UNSCALED + + + /************************************************************************** + * + * @function: + * FT_Get_Kerning + * + * @description: + * Return the kerning vector between two glyphs of the same face. + * + * @input: + * face :: + * A handle to a source face object. + * + * left_glyph :: + * The index of the left glyph in the kern pair. + * + * right_glyph :: + * The index of the right glyph in the kern pair. + * + * kern_mode :: + * See @FT_Kerning_Mode for more information. Determines the scale and + * dimension of the returned kerning vector. + * + * @output: + * akerning :: + * The kerning vector. This is either in font units, fractional pixels + * (26.6 format), or pixels for scalable formats, and in pixels for + * fixed-sizes formats. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * Only horizontal layouts (left-to-right & right-to-left) are supported + * by this method. Other layouts, or more sophisticated kernings, are + * out of the scope of this API function -- they can be implemented + * through format-specific interfaces. + * + * Note that, for TrueType fonts only, this can extract data from both + * the 'kern' table and the basic, pair-wise kerning feature from the + * GPOS table (with `TT_CONFIG_OPTION_GPOS_KERNING` enabled), though + * FreeType does not support the more advanced GPOS layout features; use + * a library like HarfBuzz for those instead. If a font has both a + * 'kern' table and kern features of a GPOS table, the 'kern' table will + * be used. + * + * Also note for right-to-left scripts, the functionality may differ for + * fonts with GPOS tables vs. 'kern' tables. For GPOS, right-to-left + * fonts typically use both a placement offset and an advance for pair + * positioning, which this API does not support, so it would output + * kerning values of zero; though if the right-to-left font used only + * advances in GPOS pair positioning, then this API could output kerning + * values for it, but it would use `left_glyph` to mean the first glyph + * for that case. Whereas 'kern' tables are always advance-only and + * always store the left glyph first. + * + * Use @FT_HAS_KERNING to find out whether a font has data that can be + * extracted with `FT_Get_Kerning`. + */ + FT_EXPORT( FT_Error ) + FT_Get_Kerning( FT_Face face, + FT_UInt left_glyph, + FT_UInt right_glyph, + FT_UInt kern_mode, + FT_Vector *akerning ); + + + /************************************************************************** + * + * @function: + * FT_Get_Track_Kerning + * + * @description: + * Return the track kerning for a given face object at a given size. + * + * @input: + * face :: + * A handle to a source face object. + * + * point_size :: + * The point size in 16.16 fractional points. + * + * degree :: + * The degree of tightness. Increasingly negative values represent + * tighter track kerning, while increasingly positive values represent + * looser track kerning. Value zero means no track kerning. + * + * @output: + * akerning :: + * The kerning in 16.16 fractional points, to be uniformly applied + * between all glyphs. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * Currently, only the Type~1 font driver supports track kerning, using + * data from AFM files (if attached with @FT_Attach_File or + * @FT_Attach_Stream). + * + * Only very few AFM files come with track kerning data; please refer to + * Adobe's AFM specification for more details. + */ + FT_EXPORT( FT_Error ) + FT_Get_Track_Kerning( FT_Face face, + FT_Fixed point_size, + FT_Int degree, + FT_Fixed* akerning ); + + + /************************************************************************** + * + * @section: + * character_mapping + * + */ + + /************************************************************************** + * + * @function: + * FT_Select_Charmap + * + * @description: + * Select a given charmap by its encoding tag (as listed in + * `freetype.h`). + * + * @inout: + * face :: + * A handle to the source face object. + * + * @input: + * encoding :: + * A handle to the selected encoding. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * This function returns an error if no charmap in the face corresponds + * to the encoding queried here. + * + * Because many fonts contain more than a single cmap for Unicode + * encoding, this function has some special code to select the one that + * covers Unicode best ('best' in the sense that a UCS-4 cmap is + * preferred to a UCS-2 cmap). It is thus preferable to @FT_Set_Charmap + * in this case. + */ + FT_EXPORT( FT_Error ) + FT_Select_Charmap( FT_Face face, + FT_Encoding encoding ); + + + /************************************************************************** + * + * @function: + * FT_Set_Charmap + * + * @description: + * Select a given charmap for character code to glyph index mapping. + * + * @inout: + * face :: + * A handle to the source face object. + * + * @input: + * charmap :: + * A handle to the selected charmap. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * This function returns an error if the charmap is not part of the face + * (i.e., if it is not listed in the `face->charmaps` table). + * + * It also fails if an OpenType type~14 charmap is selected (which + * doesn't map character codes to glyph indices at all). + */ + FT_EXPORT( FT_Error ) + FT_Set_Charmap( FT_Face face, + FT_CharMap charmap ); + + + /************************************************************************** + * + * @function: + * FT_Get_Charmap_Index + * + * @description: + * Retrieve index of a given charmap. + * + * @input: + * charmap :: + * A handle to a charmap. + * + * @return: + * The index into the array of character maps within the face to which + * `charmap` belongs. If an error occurs, -1 is returned. + * + */ + FT_EXPORT( FT_Int ) + FT_Get_Charmap_Index( FT_CharMap charmap ); + + + /************************************************************************** + * + * @function: + * FT_Get_Char_Index + * + * @description: + * Return the glyph index of a given character code. This function uses + * the currently selected charmap to do the mapping. + * + * @input: + * face :: + * A handle to the source face object. + * + * charcode :: + * The character code. + * + * @return: + * The glyph index. 0~means 'undefined character code'. + * + * @note: + * If you use FreeType to manipulate the contents of font files directly, + * be aware that the glyph index returned by this function doesn't always + * correspond to the internal indices used within the file. This is done + * to ensure that value~0 always corresponds to the 'missing glyph'. If + * the first glyph is not named '.notdef', then for Type~1 and Type~42 + * fonts, '.notdef' will be moved into the glyph ID~0 position, and + * whatever was there will be moved to the position '.notdef' had. For + * Type~1 fonts, if there is no '.notdef' glyph at all, then one will be + * created at index~0 and whatever was there will be moved to the last + * index -- Type~42 fonts are considered invalid under this condition. + */ + FT_EXPORT( FT_UInt ) + FT_Get_Char_Index( FT_Face face, + FT_ULong charcode ); + + + /************************************************************************** + * + * @function: + * FT_Get_First_Char + * + * @description: + * Return the first character code in the current charmap of a given + * face, together with its corresponding glyph index. + * + * @input: + * face :: + * A handle to the source face object. + * + * @output: + * agindex :: + * Glyph index of first character code. 0~if charmap is empty. + * + * @return: + * The charmap's first character code. + * + * @note: + * You should use this function together with @FT_Get_Next_Char to parse + * all character codes available in a given charmap. The code should + * look like this: + * + * ``` + * FT_ULong charcode; + * FT_UInt gindex; + * + * + * charcode = FT_Get_First_Char( face, &gindex ); + * while ( gindex != 0 ) + * { + * ... do something with (charcode,gindex) pair ... + * + * charcode = FT_Get_Next_Char( face, charcode, &gindex ); + * } + * ``` + * + * Be aware that character codes can have values up to 0xFFFFFFFF; this + * might happen for non-Unicode or malformed cmaps. However, even with + * regular Unicode encoding, so-called 'last resort fonts' (using SFNT + * cmap format 13, see function @FT_Get_CMap_Format) normally have + * entries for all Unicode characters up to 0x1FFFFF, which can cause *a + * lot* of iterations. + * + * Note that `*agindex` is set to~0 if the charmap is empty. The result + * itself can be~0 in two cases: if the charmap is empty or if the + * value~0 is the first valid character code. + */ + FT_EXPORT( FT_ULong ) + FT_Get_First_Char( FT_Face face, + FT_UInt *agindex ); + + + /************************************************************************** + * + * @function: + * FT_Get_Next_Char + * + * @description: + * Return the next character code in the current charmap of a given face + * following the value `char_code`, as well as the corresponding glyph + * index. + * + * @input: + * face :: + * A handle to the source face object. + * + * char_code :: + * The starting character code. + * + * @output: + * agindex :: + * Glyph index of next character code. 0~if charmap is empty. + * + * @return: + * The charmap's next character code. + * + * @note: + * You should use this function with @FT_Get_First_Char to walk over all + * character codes available in a given charmap. See the note for that + * function for a simple code example. + * + * Note that `*agindex` is set to~0 when there are no more codes in the + * charmap. + */ + FT_EXPORT( FT_ULong ) + FT_Get_Next_Char( FT_Face face, + FT_ULong char_code, + FT_UInt *agindex ); + + + /************************************************************************** + * + * @section: + * face_creation + * + */ + + /************************************************************************** + * + * @function: + * FT_Face_Properties + * + * @description: + * Set or override certain (library or module-wide) properties on a + * face-by-face basis. Useful for finer-grained control and avoiding + * locks on shared structures (threads can modify their own faces as they + * see fit). + * + * Contrary to @FT_Property_Set, this function uses @FT_Parameter so that + * you can pass multiple properties to the target face in one call. Note + * that only a subset of the available properties can be controlled. + * + * * @FT_PARAM_TAG_STEM_DARKENING (stem darkening, corresponding to the + * property `no-stem-darkening` provided by the 'autofit', 'cff', + * 'type1', and 't1cid' modules; see @no-stem-darkening). + * + * * @FT_PARAM_TAG_LCD_FILTER_WEIGHTS (LCD filter weights, corresponding + * to function @FT_Library_SetLcdFilterWeights). + * + * * @FT_PARAM_TAG_RANDOM_SEED (seed value for the CFF, Type~1, and CID + * 'random' operator, corresponding to the `random-seed` property + * provided by the 'cff', 'type1', and 't1cid' modules; see + * @random-seed). + * + * Pass `NULL` as `data` in @FT_Parameter for a given tag to reset the + * option and use the library or module default again. + * + * @input: + * face :: + * A handle to the source face object. + * + * num_properties :: + * The number of properties that follow. + * + * properties :: + * A handle to an @FT_Parameter array with `num_properties` elements. + * + * @return: + * FreeType error code. 0~means success. + * + * @example: + * Here is an example that sets three properties. You must define + * `FT_CONFIG_OPTION_SUBPIXEL_RENDERING` to make the LCD filter examples + * work. + * + * ``` + * FT_Parameter property1; + * FT_Bool darken_stems = 1; + * + * FT_Parameter property2; + * FT_LcdFiveTapFilter custom_weight = + * { 0x11, 0x44, 0x56, 0x44, 0x11 }; + * + * FT_Parameter property3; + * FT_Int32 random_seed = 314159265; + * + * FT_Parameter properties[3] = { property1, + * property2, + * property3 }; + * + * + * property1.tag = FT_PARAM_TAG_STEM_DARKENING; + * property1.data = &darken_stems; + * + * property2.tag = FT_PARAM_TAG_LCD_FILTER_WEIGHTS; + * property2.data = custom_weight; + * + * property3.tag = FT_PARAM_TAG_RANDOM_SEED; + * property3.data = &random_seed; + * + * FT_Face_Properties( face, 3, properties ); + * ``` + * + * The next example resets a single property to its default value. + * + * ``` + * FT_Parameter property; + * + * + * property.tag = FT_PARAM_TAG_LCD_FILTER_WEIGHTS; + * property.data = NULL; + * + * FT_Face_Properties( face, 1, &property ); + * ``` + * + * @since: + * 2.8 + * + */ + FT_EXPORT( FT_Error ) + FT_Face_Properties( FT_Face face, + FT_UInt num_properties, + FT_Parameter* properties ); + + + /************************************************************************** + * + * @section: + * information_retrieval + * + */ + + /************************************************************************** + * + * @function: + * FT_Get_Name_Index + * + * @description: + * Return the glyph index of a given glyph name. This only works + * for those faces where @FT_HAS_GLYPH_NAMES returns true. + * + * @input: + * face :: + * A handle to the source face object. + * + * glyph_name :: + * The glyph name. + * + * @return: + * The glyph index. 0~means 'undefined character code'. + * + * @note: + * Acceptable glyph names might come from the [Adobe Glyph + * List](https://github.com/adobe-type-tools/agl-aglfn). See + * @FT_Get_Glyph_Name for the inverse functionality. + * + * This function has limited capabilities if the config macro + * `FT_CONFIG_OPTION_POSTSCRIPT_NAMES` is not defined in `ftoption.h`: + * It then works only for fonts that actually embed glyph names (which + * many recent OpenType fonts do not). + */ + FT_EXPORT( FT_UInt ) + FT_Get_Name_Index( FT_Face face, + const FT_String* glyph_name ); + + + /************************************************************************** + * + * @function: + * FT_Get_Glyph_Name + * + * @description: + * Retrieve the ASCII name of a given glyph in a face. This only works + * for those faces where @FT_HAS_GLYPH_NAMES returns true. + * + * @input: + * face :: + * A handle to a source face object. + * + * glyph_index :: + * The glyph index. + * + * buffer_max :: + * The maximum number of bytes available in the buffer. + * + * @output: + * buffer :: + * A pointer to a target buffer where the name is copied to. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * An error is returned if the face doesn't provide glyph names or if the + * glyph index is invalid. In all cases of failure, the first byte of + * `buffer` is set to~0 to indicate an empty name. + * + * The glyph name is truncated to fit within the buffer if it is too + * long. The returned string is always zero-terminated. + * + * Be aware that FreeType reorders glyph indices internally so that glyph + * index~0 always corresponds to the 'missing glyph' (called '.notdef'). + * + * This function has limited capabilities if the config macro + * `FT_CONFIG_OPTION_POSTSCRIPT_NAMES` is not defined in `ftoption.h`: + * It then works only for fonts that actually embed glyph names (which + * many recent OpenType fonts do not). + */ + FT_EXPORT( FT_Error ) + FT_Get_Glyph_Name( FT_Face face, + FT_UInt glyph_index, + FT_Pointer buffer, + FT_UInt buffer_max ); + + + /************************************************************************** + * + * @function: + * FT_Get_Postscript_Name + * + * @description: + * Retrieve the ASCII PostScript name of a given face, if available. + * This only works with PostScript, TrueType, and OpenType fonts. + * + * @input: + * face :: + * A handle to the source face object. + * + * @return: + * A pointer to the face's PostScript name. `NULL` if unavailable. + * + * @note: + * The returned pointer is owned by the face and is destroyed with it. + * + * For variation fonts, this string changes if you select a different + * instance, and you have to call `FT_Get_PostScript_Name` again to + * retrieve it. FreeType follows Adobe TechNote #5902, 'Generating + * PostScript Names for Fonts Using OpenType Font Variations'. + * + * https://download.macromedia.com/pub/developer/opentype/tech-notes/5902.AdobePSNameGeneration.html + * + * [Since 2.9] Special PostScript names for named instances are only + * returned if the named instance is set with @FT_Set_Named_Instance (and + * the font has corresponding entries in its 'fvar' table or is the + * default named instance). If @FT_IS_VARIATION returns true, the + * algorithmically derived PostScript name is provided, not looking up + * special entries for named instances. + */ + FT_EXPORT( const char* ) + FT_Get_Postscript_Name( FT_Face face ); + + + /************************************************************************** + * + * @enum: + * FT_SUBGLYPH_FLAG_XXX + * + * @description: + * A list of constants describing subglyphs. Please refer to the 'glyf' + * table description in the OpenType specification for the meaning of the + * various flags (which get synthesized for non-OpenType subglyphs). + * + * https://learn.microsoft.com/typography/opentype/spec/glyf#composite-glyph-description + * + * @values: + * FT_SUBGLYPH_FLAG_ARGS_ARE_WORDS :: + * FT_SUBGLYPH_FLAG_ARGS_ARE_XY_VALUES :: + * FT_SUBGLYPH_FLAG_ROUND_XY_TO_GRID :: + * FT_SUBGLYPH_FLAG_SCALE :: + * FT_SUBGLYPH_FLAG_XY_SCALE :: + * FT_SUBGLYPH_FLAG_2X2 :: + * FT_SUBGLYPH_FLAG_USE_MY_METRICS :: + * + */ +#define FT_SUBGLYPH_FLAG_ARGS_ARE_WORDS 1 +#define FT_SUBGLYPH_FLAG_ARGS_ARE_XY_VALUES 2 +#define FT_SUBGLYPH_FLAG_ROUND_XY_TO_GRID 4 +#define FT_SUBGLYPH_FLAG_SCALE 8 +#define FT_SUBGLYPH_FLAG_XY_SCALE 0x40 +#define FT_SUBGLYPH_FLAG_2X2 0x80 +#define FT_SUBGLYPH_FLAG_USE_MY_METRICS 0x200 + + + /************************************************************************** + * + * @function: + * FT_Get_SubGlyph_Info + * + * @description: + * Retrieve a description of a given subglyph. Only use it if + * `glyph->format` is @FT_GLYPH_FORMAT_COMPOSITE; an error is returned + * otherwise. + * + * @input: + * glyph :: + * The source glyph slot. + * + * sub_index :: + * The index of the subglyph. Must be less than + * `glyph->num_subglyphs`. + * + * @output: + * p_index :: + * The glyph index of the subglyph. + * + * p_flags :: + * The subglyph flags, see @FT_SUBGLYPH_FLAG_XXX. + * + * p_arg1 :: + * The subglyph's first argument (if any). + * + * p_arg2 :: + * The subglyph's second argument (if any). + * + * p_transform :: + * The subglyph transformation (if any). + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * The values of `*p_arg1`, `*p_arg2`, and `*p_transform` must be + * interpreted depending on the flags returned in `*p_flags`. See the + * OpenType specification for details. + * + * https://learn.microsoft.com/typography/opentype/spec/glyf#composite-glyph-description + * + */ + FT_EXPORT( FT_Error ) + FT_Get_SubGlyph_Info( FT_GlyphSlot glyph, + FT_UInt sub_index, + FT_Int *p_index, + FT_UInt *p_flags, + FT_Int *p_arg1, + FT_Int *p_arg2, + FT_Matrix *p_transform ); + + + /************************************************************************** + * + * @enum: + * FT_FSTYPE_XXX + * + * @description: + * A list of bit flags used in the `fsType` field of the OS/2 table in a + * TrueType or OpenType font and the `FSType` entry in a PostScript font. + * These bit flags are returned by @FT_Get_FSType_Flags; they inform + * client applications of embedding and subsetting restrictions + * associated with a font. + * + * See + * https://adobe-type-tools.github.io/font-tech-notes/pdfs/AcrobatDC_FontPolicies.pdf + * for more details. + * + * @values: + * FT_FSTYPE_INSTALLABLE_EMBEDDING :: + * Fonts with no fsType bit set may be embedded and permanently + * installed on the remote system by an application. + * + * FT_FSTYPE_RESTRICTED_LICENSE_EMBEDDING :: + * Fonts that have only this bit set must not be modified, embedded or + * exchanged in any manner without first obtaining permission of the + * font software copyright owner. + * + * FT_FSTYPE_PREVIEW_AND_PRINT_EMBEDDING :: + * The font may be embedded and temporarily loaded on the remote + * system. Documents containing Preview & Print fonts must be opened + * 'read-only'; no edits can be applied to the document. + * + * FT_FSTYPE_EDITABLE_EMBEDDING :: + * The font may be embedded but must only be installed temporarily on + * other systems. In contrast to Preview & Print fonts, documents + * containing editable fonts may be opened for reading, editing is + * permitted, and changes may be saved. + * + * FT_FSTYPE_NO_SUBSETTING :: + * The font may not be subsetted prior to embedding. + * + * FT_FSTYPE_BITMAP_EMBEDDING_ONLY :: + * Only bitmaps contained in the font may be embedded; no outline data + * may be embedded. If there are no bitmaps available in the font, + * then the font is unembeddable. + * + * @note: + * The flags are ORed together, thus more than a single value can be + * returned. + * + * While the `fsType` flags can indicate that a font may be embedded, a + * license with the font vendor may be separately required to use the + * font in this way. + */ +#define FT_FSTYPE_INSTALLABLE_EMBEDDING 0x0000 +#define FT_FSTYPE_RESTRICTED_LICENSE_EMBEDDING 0x0002 +#define FT_FSTYPE_PREVIEW_AND_PRINT_EMBEDDING 0x0004 +#define FT_FSTYPE_EDITABLE_EMBEDDING 0x0008 +#define FT_FSTYPE_NO_SUBSETTING 0x0100 +#define FT_FSTYPE_BITMAP_EMBEDDING_ONLY 0x0200 + + + /************************************************************************** + * + * @function: + * FT_Get_FSType_Flags + * + * @description: + * Return the `fsType` flags for a font. + * + * @input: + * face :: + * A handle to the source face object. + * + * @return: + * The `fsType` flags, see @FT_FSTYPE_XXX. + * + * @note: + * Use this function rather than directly reading the `fs_type` field in + * the @PS_FontInfoRec structure, which is only guaranteed to return the + * correct results for Type~1 fonts. + * + * @since: + * 2.3.8 + * + */ + FT_EXPORT( FT_UShort ) + FT_Get_FSType_Flags( FT_Face face ); + + + /************************************************************************** + * + * @section: + * glyph_variants + * + * @title: + * Unicode Variation Sequences + * + * @abstract: + * The FreeType~2 interface to Unicode Variation Sequences (UVS), using + * the SFNT cmap format~14. + * + * @description: + * Many characters, especially for CJK scripts, have variant forms. They + * are a sort of grey area somewhere between being totally irrelevant and + * semantically distinct; for this reason, the Unicode consortium decided + * to introduce Variation Sequences (VS), consisting of a Unicode base + * character and a variation selector instead of further extending the + * already huge number of characters. + * + * Unicode maintains two different sets, namely 'Standardized Variation + * Sequences' and registered 'Ideographic Variation Sequences' (IVS), + * collected in the 'Ideographic Variation Database' (IVD). + * + * https://unicode.org/Public/UCD/latest/ucd/StandardizedVariants.txt + * https://unicode.org/reports/tr37/ https://unicode.org/ivd/ + * + * To date (January 2017), the character with the most ideographic + * variations is U+9089, having 32 such IVS. + * + * Three Mongolian Variation Selectors have the values U+180B-U+180D; 256 + * generic Variation Selectors are encoded in the ranges U+FE00-U+FE0F + * and U+E0100-U+E01EF. IVS currently use Variation Selectors from the + * range U+E0100-U+E01EF only. + * + * A VS consists of the base character value followed by a single + * Variation Selector. For example, to get the first variation of + * U+9089, you have to write the character sequence `U+9089 U+E0100`. + * + * Adobe and MS decided to support both standardized and ideographic VS + * with a new cmap subtable (format~14). It is an odd subtable because + * it is not a mapping of input code points to glyphs, but contains lists + * of all variations supported by the font. + * + * A variation may be either 'default' or 'non-default' for a given font. + * A default variation is the one you will get for that code point if you + * look it up in the standard Unicode cmap. A non-default variation is a + * different glyph. + * + */ + + + /************************************************************************** + * + * @function: + * FT_Face_GetCharVariantIndex + * + * @description: + * Return the glyph index of a given character code as modified by the + * variation selector. + * + * @input: + * face :: + * A handle to the source face object. + * + * charcode :: + * The character code point in Unicode. + * + * variantSelector :: + * The Unicode code point of the variation selector. + * + * @return: + * The glyph index. 0~means either 'undefined character code', or + * 'undefined selector code', or 'no variation selector cmap subtable', + * or 'current CharMap is not Unicode'. + * + * @note: + * If you use FreeType to manipulate the contents of font files directly, + * be aware that the glyph index returned by this function doesn't always + * correspond to the internal indices used within the file. This is done + * to ensure that value~0 always corresponds to the 'missing glyph'. + * + * This function is only meaningful if + * a) the font has a variation selector cmap sub table, and + * b) the current charmap has a Unicode encoding. + * + * @since: + * 2.3.6 + * + */ + FT_EXPORT( FT_UInt ) + FT_Face_GetCharVariantIndex( FT_Face face, + FT_ULong charcode, + FT_ULong variantSelector ); + + + /************************************************************************** + * + * @function: + * FT_Face_GetCharVariantIsDefault + * + * @description: + * Check whether this variation of this Unicode character is the one to + * be found in the charmap. + * + * @input: + * face :: + * A handle to the source face object. + * + * charcode :: + * The character codepoint in Unicode. + * + * variantSelector :: + * The Unicode codepoint of the variation selector. + * + * @return: + * 1~if found in the standard (Unicode) cmap, 0~if found in the variation + * selector cmap, or -1 if it is not a variation. + * + * @note: + * This function is only meaningful if the font has a variation selector + * cmap subtable. + * + * @since: + * 2.3.6 + * + */ + FT_EXPORT( FT_Int ) + FT_Face_GetCharVariantIsDefault( FT_Face face, + FT_ULong charcode, + FT_ULong variantSelector ); + + + /************************************************************************** + * + * @function: + * FT_Face_GetVariantSelectors + * + * @description: + * Return a zero-terminated list of Unicode variation selectors found in + * the font. + * + * @input: + * face :: + * A handle to the source face object. + * + * @return: + * A pointer to an array of selector code points, or `NULL` if there is + * no valid variation selector cmap subtable. + * + * @note: + * The last item in the array is~0; the array is owned by the @FT_Face + * object but can be overwritten or released on the next call to a + * FreeType function. + * + * @since: + * 2.3.6 + * + */ + FT_EXPORT( FT_UInt32* ) + FT_Face_GetVariantSelectors( FT_Face face ); + + + /************************************************************************** + * + * @function: + * FT_Face_GetVariantsOfChar + * + * @description: + * Return a zero-terminated list of Unicode variation selectors found for + * the specified character code. + * + * @input: + * face :: + * A handle to the source face object. + * + * charcode :: + * The character codepoint in Unicode. + * + * @return: + * A pointer to an array of variation selector code points that are + * active for the given character, or `NULL` if the corresponding list is + * empty. + * + * @note: + * The last item in the array is~0; the array is owned by the @FT_Face + * object but can be overwritten or released on the next call to a + * FreeType function. + * + * @since: + * 2.3.6 + * + */ + FT_EXPORT( FT_UInt32* ) + FT_Face_GetVariantsOfChar( FT_Face face, + FT_ULong charcode ); + + + /************************************************************************** + * + * @function: + * FT_Face_GetCharsOfVariant + * + * @description: + * Return a zero-terminated list of Unicode character codes found for the + * specified variation selector. + * + * @input: + * face :: + * A handle to the source face object. + * + * variantSelector :: + * The variation selector code point in Unicode. + * + * @return: + * A list of all the code points that are specified by this selector + * (both default and non-default codes are returned) or `NULL` if there + * is no valid cmap or the variation selector is invalid. + * + * @note: + * The last item in the array is~0; the array is owned by the @FT_Face + * object but can be overwritten or released on the next call to a + * FreeType function. + * + * @since: + * 2.3.6 + * + */ + FT_EXPORT( FT_UInt32* ) + FT_Face_GetCharsOfVariant( FT_Face face, + FT_ULong variantSelector ); + + + /************************************************************************** + * + * @section: + * computations + * + * @title: + * Computations + * + * @abstract: + * Crunching fixed numbers and vectors. + * + * @description: + * This section contains various functions used to perform computations + * on 16.16 fixed-point numbers or 2D vectors. FreeType does not use + * floating-point data types. + * + * **Attention**: Most arithmetic functions take `FT_Long` as arguments. + * For historical reasons, FreeType was designed under the assumption + * that `FT_Long` is a 32-bit integer; results can thus be undefined if + * the arguments don't fit into 32 bits. + * + * @order: + * FT_MulDiv + * FT_MulFix + * FT_DivFix + * FT_RoundFix + * FT_CeilFix + * FT_FloorFix + * FT_Vector_Transform + * FT_Matrix_Multiply + * FT_Matrix_Invert + * + */ + + + /************************************************************************** + * + * @function: + * FT_MulDiv + * + * @description: + * Compute `(a*b)/c` with maximum accuracy, using a 64-bit intermediate + * integer whenever necessary. + * + * This function isn't necessarily as fast as some processor-specific + * operations, but is at least completely portable. + * + * @input: + * a :: + * The first multiplier. + * + * b :: + * The second multiplier. + * + * c :: + * The divisor. + * + * @return: + * The result of `(a*b)/c`. This function never traps when trying to + * divide by zero; it simply returns 'MaxInt' or 'MinInt' depending on + * the signs of `a` and `b`. + */ + FT_EXPORT( FT_Long ) + FT_MulDiv( FT_Long a, + FT_Long b, + FT_Long c ); + + + /************************************************************************** + * + * @function: + * FT_MulFix + * + * @description: + * Compute `(a*b)/0x10000` with maximum accuracy. Its main use is to + * multiply a given value by a 16.16 fixed-point factor. + * + * @input: + * a :: + * The first multiplier. + * + * b :: + * The second multiplier. Use a 16.16 factor here whenever possible + * (see note below). + * + * @return: + * The result of `(a*b)/0x10000`. + * + * @note: + * This function has been optimized for the case where the absolute value + * of `a` is less than 2048, and `b` is a 16.16 scaling factor. As this + * happens mainly when scaling from notional units to fractional pixels + * in FreeType, it resulted in noticeable speed improvements between + * versions 2.x and 1.x. + * + * As a conclusion, always try to place a 16.16 factor as the _second_ + * argument of this function; this can make a great difference. + */ + FT_EXPORT( FT_Long ) + FT_MulFix( FT_Long a, + FT_Long b ); + + + /************************************************************************** + * + * @function: + * FT_DivFix + * + * @description: + * Compute `(a*0x10000)/b` with maximum accuracy. Its main use is to + * divide a given value by a 16.16 fixed-point factor. + * + * @input: + * a :: + * The numerator. + * + * b :: + * The denominator. Use a 16.16 factor here. + * + * @return: + * The result of `(a*0x10000)/b`. + */ + FT_EXPORT( FT_Long ) + FT_DivFix( FT_Long a, + FT_Long b ); + + + /************************************************************************** + * + * @function: + * FT_RoundFix + * + * @description: + * Round a 16.16 fixed number. + * + * @input: + * a :: + * The number to be rounded. + * + * @return: + * `a` rounded to the nearest 16.16 fixed integer, halfway cases away + * from zero. + * + * @note: + * The function uses wrap-around arithmetic. + */ + FT_EXPORT( FT_Fixed ) + FT_RoundFix( FT_Fixed a ); + + + /************************************************************************** + * + * @function: + * FT_CeilFix + * + * @description: + * Compute the smallest following integer of a 16.16 fixed number. + * + * @input: + * a :: + * The number for which the ceiling function is to be computed. + * + * @return: + * `a` rounded towards plus infinity. + * + * @note: + * The function uses wrap-around arithmetic. + */ + FT_EXPORT( FT_Fixed ) + FT_CeilFix( FT_Fixed a ); + + + /************************************************************************** + * + * @function: + * FT_FloorFix + * + * @description: + * Compute the largest previous integer of a 16.16 fixed number. + * + * @input: + * a :: + * The number for which the floor function is to be computed. + * + * @return: + * `a` rounded towards minus infinity. + */ + FT_EXPORT( FT_Fixed ) + FT_FloorFix( FT_Fixed a ); + + + /************************************************************************** + * + * @function: + * FT_Vector_Transform + * + * @description: + * Transform a single vector through a 2x2 matrix. + * + * @inout: + * vector :: + * The target vector to transform. + * + * @input: + * matrix :: + * A pointer to the source 2x2 matrix. + * + * @note: + * The result is undefined if either `vector` or `matrix` is invalid. + */ + FT_EXPORT( void ) + FT_Vector_Transform( FT_Vector* vector, + const FT_Matrix* matrix ); + + + /************************************************************************** + * + * @section: + * library_setup + * + */ + + /************************************************************************** + * + * @enum: + * FREETYPE_XXX + * + * @description: + * These three macros identify the FreeType source code version. Use + * @FT_Library_Version to access them at runtime. + * + * @values: + * FREETYPE_MAJOR :: + * The major version number. + * FREETYPE_MINOR :: + * The minor version number. + * FREETYPE_PATCH :: + * The patch level. + * + * @note: + * The version number of FreeType if built as a dynamic link library with + * the 'libtool' package is _not_ controlled by these three macros. + * + */ +#define FREETYPE_MAJOR 2 +#define FREETYPE_MINOR 13 +#define FREETYPE_PATCH 3 + + + /************************************************************************** + * + * @function: + * FT_Library_Version + * + * @description: + * Return the version of the FreeType library being used. This is useful + * when dynamically linking to the library, since one cannot use the + * macros @FREETYPE_MAJOR, @FREETYPE_MINOR, and @FREETYPE_PATCH. + * + * @input: + * library :: + * A source library handle. + * + * @output: + * amajor :: + * The major version number. + * + * aminor :: + * The minor version number. + * + * apatch :: + * The patch version number. + * + * @note: + * The reason why this function takes a `library` argument is because + * certain programs implement library initialization in a custom way that + * doesn't use @FT_Init_FreeType. + * + * In such cases, the library version might not be available before the + * library object has been created. + */ + FT_EXPORT( void ) + FT_Library_Version( FT_Library library, + FT_Int *amajor, + FT_Int *aminor, + FT_Int *apatch ); + + + /************************************************************************** + * + * @section: + * other_api_data + * + */ + + /************************************************************************** + * + * @function: + * FT_Face_CheckTrueTypePatents + * + * @description: + * Deprecated, does nothing. + * + * @input: + * face :: + * A face handle. + * + * @return: + * Always returns false. + * + * @note: + * Since May 2010, TrueType hinting is no longer patented. + * + * @since: + * 2.3.5 + * + */ + FT_EXPORT( FT_Bool ) + FT_Face_CheckTrueTypePatents( FT_Face face ); + + + /************************************************************************** + * + * @function: + * FT_Face_SetUnpatentedHinting + * + * @description: + * Deprecated, does nothing. + * + * @input: + * face :: + * A face handle. + * + * value :: + * New boolean setting. + * + * @return: + * Always returns false. + * + * @note: + * Since May 2010, TrueType hinting is no longer patented. + * + * @since: + * 2.3.5 + * + */ + FT_EXPORT( FT_Bool ) + FT_Face_SetUnpatentedHinting( FT_Face face, + FT_Bool value ); + + /* */ + + +FT_END_HEADER + +#endif /* FREETYPE_H_ */ + + +/* END */ diff --git a/dependencies/winx64/include/freetype2/freetype/ftadvanc.h b/dependencies/winx64/include/freetype2/freetype/ftadvanc.h new file mode 100644 index 0000000..85b8ba2 --- /dev/null +++ b/dependencies/winx64/include/freetype2/freetype/ftadvanc.h @@ -0,0 +1,188 @@ +/**************************************************************************** + * + * ftadvanc.h + * + * Quick computation of advance widths (specification only). + * + * Copyright (C) 2008-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + +#ifndef FTADVANC_H_ +#define FTADVANC_H_ + + +#include + +#ifdef FREETYPE_H +#error "freetype.h of FreeType 1 has been loaded!" +#error "Please fix the directory search order for header files" +#error "so that freetype.h of FreeType 2 is found first." +#endif + + +FT_BEGIN_HEADER + + + /************************************************************************** + * + * @section: + * quick_advance + * + * @title: + * Quick retrieval of advance values + * + * @abstract: + * Retrieve horizontal and vertical advance values without processing + * glyph outlines, if possible. + * + * @description: + * This section contains functions to quickly extract advance values + * without handling glyph outlines, if possible. + * + * @order: + * FT_Get_Advance + * FT_Get_Advances + * + */ + + + /************************************************************************** + * + * @enum: + * FT_ADVANCE_FLAG_FAST_ONLY + * + * @description: + * A bit-flag to be OR-ed with the `flags` parameter of the + * @FT_Get_Advance and @FT_Get_Advances functions. + * + * If set, it indicates that you want these functions to fail if the + * corresponding hinting mode or font driver doesn't allow for very quick + * advance computation. + * + * Typically, glyphs that are either unscaled, unhinted, bitmapped, or + * light-hinted can have their advance width computed very quickly. + * + * Normal and bytecode hinted modes that require loading, scaling, and + * hinting of the glyph outline, are extremely slow by comparison. + */ +#define FT_ADVANCE_FLAG_FAST_ONLY 0x20000000L + + + /************************************************************************** + * + * @function: + * FT_Get_Advance + * + * @description: + * Retrieve the advance value of a given glyph outline in an @FT_Face. + * + * @input: + * face :: + * The source @FT_Face handle. + * + * gindex :: + * The glyph index. + * + * load_flags :: + * A set of bit flags similar to those used when calling + * @FT_Load_Glyph, used to determine what kind of advances you need. + * + * @output: + * padvance :: + * The advance value. If scaling is performed (based on the value of + * `load_flags`), the advance value is in 16.16 format. Otherwise, it + * is in font units. + * + * If @FT_LOAD_VERTICAL_LAYOUT is set, this is the vertical advance + * corresponding to a vertical layout. Otherwise, it is the horizontal + * advance in a horizontal layout. + * + * @return: + * FreeType error code. 0 means success. + * + * @note: + * This function may fail if you use @FT_ADVANCE_FLAG_FAST_ONLY and if + * the corresponding font backend doesn't have a quick way to retrieve + * the advances. + * + * A scaled advance is returned in 16.16 format but isn't transformed by + * the affine transformation specified by @FT_Set_Transform. + */ + FT_EXPORT( FT_Error ) + FT_Get_Advance( FT_Face face, + FT_UInt gindex, + FT_Int32 load_flags, + FT_Fixed *padvance ); + + + /************************************************************************** + * + * @function: + * FT_Get_Advances + * + * @description: + * Retrieve the advance values of several glyph outlines in an @FT_Face. + * + * @input: + * face :: + * The source @FT_Face handle. + * + * start :: + * The first glyph index. + * + * count :: + * The number of advance values you want to retrieve. + * + * load_flags :: + * A set of bit flags similar to those used when calling + * @FT_Load_Glyph. + * + * @output: + * padvance :: + * The advance values. This array, to be provided by the caller, must + * contain at least `count` elements. + * + * If scaling is performed (based on the value of `load_flags`), the + * advance values are in 16.16 format. Otherwise, they are in font + * units. + * + * If @FT_LOAD_VERTICAL_LAYOUT is set, these are the vertical advances + * corresponding to a vertical layout. Otherwise, they are the + * horizontal advances in a horizontal layout. + * + * @return: + * FreeType error code. 0 means success. + * + * @note: + * This function may fail if you use @FT_ADVANCE_FLAG_FAST_ONLY and if + * the corresponding font backend doesn't have a quick way to retrieve + * the advances. + * + * Scaled advances are returned in 16.16 format but aren't transformed by + * the affine transformation specified by @FT_Set_Transform. + */ + FT_EXPORT( FT_Error ) + FT_Get_Advances( FT_Face face, + FT_UInt start, + FT_UInt count, + FT_Int32 load_flags, + FT_Fixed *padvances ); + + /* */ + + +FT_END_HEADER + +#endif /* FTADVANC_H_ */ + + +/* END */ diff --git a/dependencies/winx64/include/freetype2/freetype/ftbbox.h b/dependencies/winx64/include/freetype2/freetype/ftbbox.h new file mode 100644 index 0000000..12bbfa6 --- /dev/null +++ b/dependencies/winx64/include/freetype2/freetype/ftbbox.h @@ -0,0 +1,101 @@ +/**************************************************************************** + * + * ftbbox.h + * + * FreeType exact bbox computation (specification). + * + * Copyright (C) 1996-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + + /************************************************************************** + * + * This component has a _single_ role: to compute exact outline bounding + * boxes. + * + * It is separated from the rest of the engine for various technical + * reasons. It may well be integrated in 'ftoutln' later. + * + */ + + +#ifndef FTBBOX_H_ +#define FTBBOX_H_ + + +#include + +#ifdef FREETYPE_H +#error "freetype.h of FreeType 1 has been loaded!" +#error "Please fix the directory search order for header files" +#error "so that freetype.h of FreeType 2 is found first." +#endif + + +FT_BEGIN_HEADER + + + /************************************************************************** + * + * @section: + * outline_processing + * + */ + + + /************************************************************************** + * + * @function: + * FT_Outline_Get_BBox + * + * @description: + * Compute the exact bounding box of an outline. This is slower than + * computing the control box. However, it uses an advanced algorithm + * that returns _very_ quickly when the two boxes coincide. Otherwise, + * the outline Bezier arcs are traversed to extract their extrema. + * + * @input: + * outline :: + * A pointer to the source outline. + * + * @output: + * abbox :: + * The outline's exact bounding box. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * If the font is tricky and the glyph has been loaded with + * @FT_LOAD_NO_SCALE, the resulting BBox is meaningless. To get + * reasonable values for the BBox it is necessary to load the glyph at a + * large ppem value (so that the hinting instructions can properly shift + * and scale the subglyphs), then extracting the BBox, which can be + * eventually converted back to font units. + */ + FT_EXPORT( FT_Error ) + FT_Outline_Get_BBox( FT_Outline* outline, + FT_BBox *abbox ); + + /* */ + + +FT_END_HEADER + +#endif /* FTBBOX_H_ */ + + +/* END */ + + +/* Local Variables: */ +/* coding: utf-8 */ +/* End: */ diff --git a/dependencies/winx64/include/freetype2/freetype/ftbdf.h b/dependencies/winx64/include/freetype2/freetype/ftbdf.h new file mode 100644 index 0000000..6f63b0b --- /dev/null +++ b/dependencies/winx64/include/freetype2/freetype/ftbdf.h @@ -0,0 +1,212 @@ +/**************************************************************************** + * + * ftbdf.h + * + * FreeType API for accessing BDF-specific strings (specification). + * + * Copyright (C) 2002-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + +#ifndef FTBDF_H_ +#define FTBDF_H_ + +#include + +#ifdef FREETYPE_H +#error "freetype.h of FreeType 1 has been loaded!" +#error "Please fix the directory search order for header files" +#error "so that freetype.h of FreeType 2 is found first." +#endif + + +FT_BEGIN_HEADER + + + /************************************************************************** + * + * @section: + * bdf_fonts + * + * @title: + * BDF and PCF Files + * + * @abstract: + * BDF and PCF specific API. + * + * @description: + * This section contains the declaration of functions specific to BDF and + * PCF fonts. + * + */ + + + /************************************************************************** + * + * @enum: + * BDF_PropertyType + * + * @description: + * A list of BDF property types. + * + * @values: + * BDF_PROPERTY_TYPE_NONE :: + * Value~0 is used to indicate a missing property. + * + * BDF_PROPERTY_TYPE_ATOM :: + * Property is a string atom. + * + * BDF_PROPERTY_TYPE_INTEGER :: + * Property is a 32-bit signed integer. + * + * BDF_PROPERTY_TYPE_CARDINAL :: + * Property is a 32-bit unsigned integer. + */ + typedef enum BDF_PropertyType_ + { + BDF_PROPERTY_TYPE_NONE = 0, + BDF_PROPERTY_TYPE_ATOM = 1, + BDF_PROPERTY_TYPE_INTEGER = 2, + BDF_PROPERTY_TYPE_CARDINAL = 3 + + } BDF_PropertyType; + + + /************************************************************************** + * + * @type: + * BDF_Property + * + * @description: + * A handle to a @BDF_PropertyRec structure to model a given BDF/PCF + * property. + */ + typedef struct BDF_PropertyRec_* BDF_Property; + + + /************************************************************************** + * + * @struct: + * BDF_PropertyRec + * + * @description: + * This structure models a given BDF/PCF property. + * + * @fields: + * type :: + * The property type. + * + * u.atom :: + * The atom string, if type is @BDF_PROPERTY_TYPE_ATOM. May be + * `NULL`, indicating an empty string. + * + * u.integer :: + * A signed integer, if type is @BDF_PROPERTY_TYPE_INTEGER. + * + * u.cardinal :: + * An unsigned integer, if type is @BDF_PROPERTY_TYPE_CARDINAL. + */ + typedef struct BDF_PropertyRec_ + { + BDF_PropertyType type; + union { + const char* atom; + FT_Int32 integer; + FT_UInt32 cardinal; + + } u; + + } BDF_PropertyRec; + + + /************************************************************************** + * + * @function: + * FT_Get_BDF_Charset_ID + * + * @description: + * Retrieve a BDF font character set identity, according to the BDF + * specification. + * + * @input: + * face :: + * A handle to the input face. + * + * @output: + * acharset_encoding :: + * Charset encoding, as a C~string, owned by the face. + * + * acharset_registry :: + * Charset registry, as a C~string, owned by the face. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * This function only works with BDF faces, returning an error otherwise. + */ + FT_EXPORT( FT_Error ) + FT_Get_BDF_Charset_ID( FT_Face face, + const char* *acharset_encoding, + const char* *acharset_registry ); + + + /************************************************************************** + * + * @function: + * FT_Get_BDF_Property + * + * @description: + * Retrieve a BDF property from a BDF or PCF font file. + * + * @input: + * face :: + * A handle to the input face. + * + * name :: + * The property name. + * + * @output: + * aproperty :: + * The property. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * This function works with BDF _and_ PCF fonts. It returns an error + * otherwise. It also returns an error if the property is not in the + * font. + * + * A 'property' is a either key-value pair within the STARTPROPERTIES + * ... ENDPROPERTIES block of a BDF font or a key-value pair from the + * `info->props` array within a `FontRec` structure of a PCF font. + * + * Integer properties are always stored as 'signed' within PCF fonts; + * consequently, @BDF_PROPERTY_TYPE_CARDINAL is a possible return value + * for BDF fonts only. + * + * In case of error, `aproperty->type` is always set to + * @BDF_PROPERTY_TYPE_NONE. + */ + FT_EXPORT( FT_Error ) + FT_Get_BDF_Property( FT_Face face, + const char* prop_name, + BDF_PropertyRec *aproperty ); + + /* */ + +FT_END_HEADER + +#endif /* FTBDF_H_ */ + + +/* END */ diff --git a/dependencies/winx64/include/freetype2/freetype/ftbitmap.h b/dependencies/winx64/include/freetype2/freetype/ftbitmap.h new file mode 100644 index 0000000..df9d462 --- /dev/null +++ b/dependencies/winx64/include/freetype2/freetype/ftbitmap.h @@ -0,0 +1,329 @@ +/**************************************************************************** + * + * ftbitmap.h + * + * FreeType utility functions for bitmaps (specification). + * + * Copyright (C) 2004-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + +#ifndef FTBITMAP_H_ +#define FTBITMAP_H_ + + +#include +#include + +#ifdef FREETYPE_H +#error "freetype.h of FreeType 1 has been loaded!" +#error "Please fix the directory search order for header files" +#error "so that freetype.h of FreeType 2 is found first." +#endif + + +FT_BEGIN_HEADER + + + /************************************************************************** + * + * @section: + * bitmap_handling + * + * @title: + * Bitmap Handling + * + * @abstract: + * Handling FT_Bitmap objects. + * + * @description: + * This section contains functions for handling @FT_Bitmap objects, + * automatically adjusting the target's bitmap buffer size as needed. + * + * Note that none of the functions changes the bitmap's 'flow' (as + * indicated by the sign of the `pitch` field in @FT_Bitmap). + * + * To set the flow, assign an appropriate positive or negative value to + * the `pitch` field of the target @FT_Bitmap object after calling + * @FT_Bitmap_Init but before calling any of the other functions + * described here. + */ + + + /************************************************************************** + * + * @function: + * FT_Bitmap_Init + * + * @description: + * Initialize a pointer to an @FT_Bitmap structure. + * + * @inout: + * abitmap :: + * A pointer to the bitmap structure. + * + * @note: + * A deprecated name for the same function is `FT_Bitmap_New`. + */ + FT_EXPORT( void ) + FT_Bitmap_Init( FT_Bitmap *abitmap ); + + + /* deprecated */ + FT_EXPORT( void ) + FT_Bitmap_New( FT_Bitmap *abitmap ); + + + /************************************************************************** + * + * @function: + * FT_Bitmap_Copy + * + * @description: + * Copy a bitmap into another one. + * + * @input: + * library :: + * A handle to a library object. + * + * source :: + * A handle to the source bitmap. + * + * @output: + * target :: + * A handle to the target bitmap. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * `source->buffer` and `target->buffer` must neither be equal nor + * overlap. + */ + FT_EXPORT( FT_Error ) + FT_Bitmap_Copy( FT_Library library, + const FT_Bitmap *source, + FT_Bitmap *target ); + + + /************************************************************************** + * + * @function: + * FT_Bitmap_Embolden + * + * @description: + * Embolden a bitmap. The new bitmap will be about `xStrength` pixels + * wider and `yStrength` pixels higher. The left and bottom borders are + * kept unchanged. + * + * @input: + * library :: + * A handle to a library object. + * + * xStrength :: + * How strong the glyph is emboldened horizontally. Expressed in 26.6 + * pixel format. + * + * yStrength :: + * How strong the glyph is emboldened vertically. Expressed in 26.6 + * pixel format. + * + * @inout: + * bitmap :: + * A handle to the target bitmap. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * The current implementation restricts `xStrength` to be less than or + * equal to~8 if bitmap is of pixel_mode @FT_PIXEL_MODE_MONO. + * + * If you want to embolden the bitmap owned by a @FT_GlyphSlotRec, you + * should call @FT_GlyphSlot_Own_Bitmap on the slot first. + * + * Bitmaps in @FT_PIXEL_MODE_GRAY2 and @FT_PIXEL_MODE_GRAY@ format are + * converted to @FT_PIXEL_MODE_GRAY format (i.e., 8bpp). + */ + FT_EXPORT( FT_Error ) + FT_Bitmap_Embolden( FT_Library library, + FT_Bitmap* bitmap, + FT_Pos xStrength, + FT_Pos yStrength ); + + + /************************************************************************** + * + * @function: + * FT_Bitmap_Convert + * + * @description: + * Convert a bitmap object with depth 1bpp, 2bpp, 4bpp, 8bpp or 32bpp to + * a bitmap object with depth 8bpp, making the number of used bytes per + * line (a.k.a. the 'pitch') a multiple of `alignment`. + * + * @input: + * library :: + * A handle to a library object. + * + * source :: + * The source bitmap. + * + * alignment :: + * The pitch of the bitmap is a multiple of this argument. Common + * values are 1, 2, or 4. + * + * @output: + * target :: + * The target bitmap. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * It is possible to call @FT_Bitmap_Convert multiple times without + * calling @FT_Bitmap_Done (the memory is simply reallocated). + * + * Use @FT_Bitmap_Done to finally remove the bitmap object. + * + * The `library` argument is taken to have access to FreeType's memory + * handling functions. + * + * `source->buffer` and `target->buffer` must neither be equal nor + * overlap. + */ + FT_EXPORT( FT_Error ) + FT_Bitmap_Convert( FT_Library library, + const FT_Bitmap *source, + FT_Bitmap *target, + FT_Int alignment ); + + + /************************************************************************** + * + * @function: + * FT_Bitmap_Blend + * + * @description: + * Blend a bitmap onto another bitmap, using a given color. + * + * @input: + * library :: + * A handle to a library object. + * + * source :: + * The source bitmap, which can have any @FT_Pixel_Mode format. + * + * source_offset :: + * The offset vector to the upper left corner of the source bitmap in + * 26.6 pixel format. It should represent an integer offset; the + * function will set the lowest six bits to zero to enforce that. + * + * color :: + * The color used to draw `source` onto `target`. + * + * @inout: + * target :: + * A handle to an `FT_Bitmap` object. It should be either initialized + * as empty with a call to @FT_Bitmap_Init, or it should be of type + * @FT_PIXEL_MODE_BGRA. + * + * atarget_offset :: + * The offset vector to the upper left corner of the target bitmap in + * 26.6 pixel format. It should represent an integer offset; the + * function will set the lowest six bits to zero to enforce that. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * This function doesn't perform clipping. + * + * The bitmap in `target` gets allocated or reallocated as needed; the + * vector `atarget_offset` is updated accordingly. + * + * In case of allocation or reallocation, the bitmap's pitch is set to + * `4 * width`. Both `source` and `target` must have the same bitmap + * flow (as indicated by the sign of the `pitch` field). + * + * `source->buffer` and `target->buffer` must neither be equal nor + * overlap. + * + * @since: + * 2.10 + */ + FT_EXPORT( FT_Error ) + FT_Bitmap_Blend( FT_Library library, + const FT_Bitmap* source, + const FT_Vector source_offset, + FT_Bitmap* target, + FT_Vector *atarget_offset, + FT_Color color ); + + + /************************************************************************** + * + * @function: + * FT_GlyphSlot_Own_Bitmap + * + * @description: + * Make sure that a glyph slot owns `slot->bitmap`. + * + * @input: + * slot :: + * The glyph slot. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * This function is to be used in combination with @FT_Bitmap_Embolden. + */ + FT_EXPORT( FT_Error ) + FT_GlyphSlot_Own_Bitmap( FT_GlyphSlot slot ); + + + /************************************************************************** + * + * @function: + * FT_Bitmap_Done + * + * @description: + * Destroy a bitmap object initialized with @FT_Bitmap_Init. + * + * @input: + * library :: + * A handle to a library object. + * + * bitmap :: + * The bitmap object to be freed. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * The `library` argument is taken to have access to FreeType's memory + * handling functions. + */ + FT_EXPORT( FT_Error ) + FT_Bitmap_Done( FT_Library library, + FT_Bitmap *bitmap ); + + + /* */ + + +FT_END_HEADER + +#endif /* FTBITMAP_H_ */ + + +/* END */ diff --git a/dependencies/winx64/include/freetype2/freetype/ftbzip2.h b/dependencies/winx64/include/freetype2/freetype/ftbzip2.h new file mode 100644 index 0000000..c5baea8 --- /dev/null +++ b/dependencies/winx64/include/freetype2/freetype/ftbzip2.h @@ -0,0 +1,102 @@ +/**************************************************************************** + * + * ftbzip2.h + * + * Bzip2-compressed stream support. + * + * Copyright (C) 2010-2024 by + * Joel Klinghed. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + +#ifndef FTBZIP2_H_ +#define FTBZIP2_H_ + +#include + +#ifdef FREETYPE_H +#error "freetype.h of FreeType 1 has been loaded!" +#error "Please fix the directory search order for header files" +#error "so that freetype.h of FreeType 2 is found first." +#endif + + +FT_BEGIN_HEADER + + /************************************************************************** + * + * @section: + * bzip2 + * + * @title: + * BZIP2 Streams + * + * @abstract: + * Using bzip2-compressed font files. + * + * @description: + * In certain builds of the library, bzip2 compression recognition is + * automatically handled when calling @FT_New_Face or @FT_Open_Face. + * This means that if no font driver is capable of handling the raw + * compressed file, the library will try to open a bzip2 compressed + * stream from it and re-open the face with it. + * + * The stream implementation is very basic and resets the decompression + * process each time seeking backwards is needed within the stream, + * which significantly undermines the performance. + * + * This section contains the declaration of Bzip2-specific functions. + * + */ + + + /************************************************************************** + * + * @function: + * FT_Stream_OpenBzip2 + * + * @description: + * Open a new stream to parse bzip2-compressed font files. This is + * mainly used to support the compressed `*.pcf.bz2` fonts that come with + * XFree86. + * + * @input: + * stream :: + * The target embedding stream. + * + * source :: + * The source stream. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * The source stream must be opened _before_ calling this function. + * + * Calling the internal function `FT_Stream_Close` on the new stream will + * **not** call `FT_Stream_Close` on the source stream. None of the + * stream objects will be released to the heap. + * + * This function may return `FT_Err_Unimplemented_Feature` if your build + * of FreeType was not compiled with bzip2 support. + */ + FT_EXPORT( FT_Error ) + FT_Stream_OpenBzip2( FT_Stream stream, + FT_Stream source ); + + /* */ + + +FT_END_HEADER + +#endif /* FTBZIP2_H_ */ + + +/* END */ diff --git a/dependencies/winx64/include/freetype2/freetype/ftcache.h b/dependencies/winx64/include/freetype2/freetype/ftcache.h new file mode 100644 index 0000000..140df4c --- /dev/null +++ b/dependencies/winx64/include/freetype2/freetype/ftcache.h @@ -0,0 +1,1087 @@ +/**************************************************************************** + * + * ftcache.h + * + * FreeType Cache subsystem (specification). + * + * Copyright (C) 1996-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + +#ifndef FTCACHE_H_ +#define FTCACHE_H_ + + +#include + + +FT_BEGIN_HEADER + + + /************************************************************************** + * + * @section: + * cache_subsystem + * + * @title: + * Cache Sub-System + * + * @abstract: + * How to cache face, size, and glyph data with FreeType~2. + * + * @description: + * This section describes the FreeType~2 cache sub-system, which is used + * to limit the number of concurrently opened @FT_Face and @FT_Size + * objects, as well as caching information like character maps and glyph + * images while limiting their maximum memory usage. + * + * Note that all types and functions begin with the `FTC_` prefix rather + * than the usual `FT_` prefix in the rest of FreeType. + * + * The cache is highly portable and, thus, doesn't know anything about + * the fonts installed on your system, or how to access them. Therefore, + * it requires the following. + * + * * @FTC_FaceID, an arbitrary non-zero value that uniquely identifies + * available or installed font faces, has to be provided to the + * cache by the client. Note that the cache only stores and compares + * these values and doesn't try to interpret them in any way, but they + * have to be persistent on the client side. + * + * * @FTC_Face_Requester, a method to convert an @FTC_FaceID into a new + * @FT_Face object when necessary, has to be provided to the cache by + * the client. The @FT_Face object is completely managed by the cache, + * including its termination through @FT_Done_Face. To monitor + * termination of face objects, the finalizer callback in the `generic` + * field of the @FT_Face object can be used, which might also be used + * to store the @FTC_FaceID of the face. + * + * Clients are free to map face IDs to anything useful. The most simple + * usage is, for example, to associate them to a `{pathname,face_index}` + * pair that is then used by @FTC_Face_Requester to call @FT_New_Face. + * However, more complex schemes are also possible. + * + * Note that for the cache to work correctly, the face ID values must be + * **persistent**, which means that the contents they point to should not + * change at runtime, or that their value should not become invalid. + * If this is unavoidable (e.g., when a font is uninstalled at runtime), + * you should call @FTC_Manager_RemoveFaceID as soon as possible to let + * the cache get rid of any references to the old @FTC_FaceID it may keep + * internally. Failure to do so will lead to incorrect behaviour or even + * crashes in @FTC_Face_Requester. + * + * To use the cache, start with calling @FTC_Manager_New to create a new + * @FTC_Manager object, which models a single cache instance. You can + * then look up @FT_Face and @FT_Size objects with + * @FTC_Manager_LookupFace and @FTC_Manager_LookupSize, respectively, and + * use them in any FreeType work stream. You can also cache other + * FreeType objects as follows. + * + * * If you want to use the charmap caching, call @FTC_CMapCache_New, + * then later use @FTC_CMapCache_Lookup to perform the equivalent of + * @FT_Get_Char_Index, only much faster. + * + * * If you want to use the @FT_Glyph caching, call @FTC_ImageCache_New, + * then later use @FTC_ImageCache_Lookup to retrieve the corresponding + * @FT_Glyph objects from the cache. + * + * * If you need lots of small bitmaps, it is much more memory-efficient + * to call @FTC_SBitCache_New followed by @FTC_SBitCache_Lookup. This + * returns @FTC_SBitRec structures, which are used to store small + * bitmaps directly. (A small bitmap is one whose metrics and + * dimensions all fit into 8-bit integers). + * + * @order: + * FTC_Manager + * FTC_FaceID + * FTC_Face_Requester + * + * FTC_Manager_New + * FTC_Manager_Reset + * FTC_Manager_Done + * FTC_Manager_LookupFace + * FTC_Manager_LookupSize + * FTC_Manager_RemoveFaceID + * + * FTC_Node + * FTC_Node_Unref + * + * FTC_ImageCache + * FTC_ImageCache_New + * FTC_ImageCache_Lookup + * + * FTC_SBit + * FTC_SBitCache + * FTC_SBitCache_New + * FTC_SBitCache_Lookup + * + * FTC_CMapCache + * FTC_CMapCache_New + * FTC_CMapCache_Lookup + * + *************************************************************************/ + + + /*************************************************************************/ + /*************************************************************************/ + /*************************************************************************/ + /***** *****/ + /***** BASIC TYPE DEFINITIONS *****/ + /***** *****/ + /*************************************************************************/ + /*************************************************************************/ + /*************************************************************************/ + + + /************************************************************************** + * + * @type: + * FTC_FaceID + * + * @description: + * An opaque pointer type that is used to identity face objects. The + * contents of such objects is application-dependent. + * + * These pointers are typically used to point to a user-defined structure + * containing a font file path, and face index. + * + * @note: + * Never use `NULL` as a valid @FTC_FaceID. + * + * Face IDs are passed by the client to the cache manager that calls, + * when needed, the @FTC_Face_Requester to translate them into new + * @FT_Face objects. + * + * If the content of a given face ID changes at runtime, or if the value + * becomes invalid (e.g., when uninstalling a font), you should + * immediately call @FTC_Manager_RemoveFaceID before any other cache + * function. + * + * Failure to do so will result in incorrect behaviour or even memory + * leaks and crashes. + */ + typedef FT_Pointer FTC_FaceID; + + + /************************************************************************** + * + * @functype: + * FTC_Face_Requester + * + * @description: + * A callback function provided by client applications. It is used by + * the cache manager to translate a given @FTC_FaceID into a new valid + * @FT_Face object, on demand. + * + * @input: + * face_id :: + * The face ID to resolve. + * + * library :: + * A handle to a FreeType library object. + * + * req_data :: + * Application-provided request data (see note below). + * + * @output: + * aface :: + * A new @FT_Face handle. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * The third parameter `req_data` is the same as the one passed by the + * client when @FTC_Manager_New is called. + * + * The face requester should not perform funny things on the returned + * face object, like creating a new @FT_Size for it, or setting a + * transformation through @FT_Set_Transform! + */ + typedef FT_Error + (*FTC_Face_Requester)( FTC_FaceID face_id, + FT_Library library, + FT_Pointer req_data, + FT_Face* aface ); + + /* */ + + + /*************************************************************************/ + /*************************************************************************/ + /*************************************************************************/ + /***** *****/ + /***** CACHE MANAGER OBJECT *****/ + /***** *****/ + /*************************************************************************/ + /*************************************************************************/ + /*************************************************************************/ + + + /************************************************************************** + * + * @type: + * FTC_Manager + * + * @description: + * This object corresponds to one instance of the cache-subsystem. It is + * used to cache one or more @FT_Face objects, along with corresponding + * @FT_Size objects. + * + * The manager intentionally limits the total number of opened @FT_Face + * and @FT_Size objects to control memory usage. See the `max_faces` and + * `max_sizes` parameters of @FTC_Manager_New. + * + * The manager is also used to cache 'nodes' of various types while + * limiting their total memory usage. + * + * All limitations are enforced by keeping lists of managed objects in + * most-recently-used order, and flushing old nodes to make room for new + * ones. + */ + typedef struct FTC_ManagerRec_* FTC_Manager; + + + /************************************************************************** + * + * @type: + * FTC_Node + * + * @description: + * An opaque handle to a cache node object. Each cache node is + * reference-counted. A node with a count of~0 might be flushed out of a + * full cache whenever a lookup request is performed. + * + * If you look up nodes, you have the ability to 'acquire' them, i.e., to + * increment their reference count. This will prevent the node from + * being flushed out of the cache until you explicitly 'release' it (see + * @FTC_Node_Unref). + * + * See also @FTC_SBitCache_Lookup and @FTC_ImageCache_Lookup. + */ + typedef struct FTC_NodeRec_* FTC_Node; + + + /************************************************************************** + * + * @function: + * FTC_Manager_New + * + * @description: + * Create a new cache manager. + * + * @input: + * library :: + * The parent FreeType library handle to use. + * + * max_faces :: + * Maximum number of opened @FT_Face objects managed by this cache + * instance. Use~0 for defaults. + * + * max_sizes :: + * Maximum number of opened @FT_Size objects managed by this cache + * instance. Use~0 for defaults. + * + * max_bytes :: + * Maximum number of bytes to use for cached data nodes. Use~0 for + * defaults. Note that this value does not account for managed + * @FT_Face and @FT_Size objects. + * + * requester :: + * An application-provided callback used to translate face IDs into + * real @FT_Face objects. + * + * req_data :: + * A generic pointer that is passed to the requester each time it is + * called (see @FTC_Face_Requester). + * + * @output: + * amanager :: + * A handle to a new manager object. 0~in case of failure. + * + * @return: + * FreeType error code. 0~means success. + */ + FT_EXPORT( FT_Error ) + FTC_Manager_New( FT_Library library, + FT_UInt max_faces, + FT_UInt max_sizes, + FT_ULong max_bytes, + FTC_Face_Requester requester, + FT_Pointer req_data, + FTC_Manager *amanager ); + + + /************************************************************************** + * + * @function: + * FTC_Manager_Reset + * + * @description: + * Empty a given cache manager. This simply gets rid of all the + * currently cached @FT_Face and @FT_Size objects within the manager. + * + * @inout: + * manager :: + * A handle to the manager. + */ + FT_EXPORT( void ) + FTC_Manager_Reset( FTC_Manager manager ); + + + /************************************************************************** + * + * @function: + * FTC_Manager_Done + * + * @description: + * Destroy a given manager after emptying it. + * + * @input: + * manager :: + * A handle to the target cache manager object. + */ + FT_EXPORT( void ) + FTC_Manager_Done( FTC_Manager manager ); + + + /************************************************************************** + * + * @function: + * FTC_Manager_LookupFace + * + * @description: + * Retrieve the @FT_Face object that corresponds to a given face ID + * through a cache manager. + * + * @input: + * manager :: + * A handle to the cache manager. + * + * face_id :: + * The ID of the face object. + * + * @output: + * aface :: + * A handle to the face object. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * The returned @FT_Face object is always owned by the manager. You + * should never try to discard it yourself. + * + * The @FT_Face object doesn't necessarily have a current size object + * (i.e., face->size can be~0). If you need a specific 'font size', use + * @FTC_Manager_LookupSize instead. + * + * Never change the face's transformation matrix (i.e., never call the + * @FT_Set_Transform function) on a returned face! If you need to + * transform glyphs, do it yourself after glyph loading. + * + * When you perform a lookup, out-of-memory errors are detected _within_ + * the lookup and force incremental flushes of the cache until enough + * memory is released for the lookup to succeed. + * + * If a lookup fails with `FT_Err_Out_Of_Memory` the cache has already + * been completely flushed, and still no memory was available for the + * operation. + */ + FT_EXPORT( FT_Error ) + FTC_Manager_LookupFace( FTC_Manager manager, + FTC_FaceID face_id, + FT_Face *aface ); + + + /************************************************************************** + * + * @struct: + * FTC_ScalerRec + * + * @description: + * A structure used to describe a given character size in either pixels + * or points to the cache manager. See @FTC_Manager_LookupSize. + * + * @fields: + * face_id :: + * The source face ID. + * + * width :: + * The character width. + * + * height :: + * The character height. + * + * pixel :: + * A Boolean. If 1, the `width` and `height` fields are interpreted as + * integer pixel character sizes. Otherwise, they are expressed as + * 1/64 of points. + * + * x_res :: + * Only used when `pixel` is value~0 to indicate the horizontal + * resolution in dpi. + * + * y_res :: + * Only used when `pixel` is value~0 to indicate the vertical + * resolution in dpi. + * + * @note: + * This type is mainly used to retrieve @FT_Size objects through the + * cache manager. + */ + typedef struct FTC_ScalerRec_ + { + FTC_FaceID face_id; + FT_UInt width; + FT_UInt height; + FT_Int pixel; + FT_UInt x_res; + FT_UInt y_res; + + } FTC_ScalerRec; + + + /************************************************************************** + * + * @struct: + * FTC_Scaler + * + * @description: + * A handle to an @FTC_ScalerRec structure. + */ + typedef struct FTC_ScalerRec_* FTC_Scaler; + + + /************************************************************************** + * + * @function: + * FTC_Manager_LookupSize + * + * @description: + * Retrieve the @FT_Size object that corresponds to a given + * @FTC_ScalerRec pointer through a cache manager. + * + * @input: + * manager :: + * A handle to the cache manager. + * + * scaler :: + * A scaler handle. + * + * @output: + * asize :: + * A handle to the size object. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * The returned @FT_Size object is always owned by the manager. You + * should never try to discard it by yourself. + * + * You can access the parent @FT_Face object simply as `size->face` if + * you need it. Note that this object is also owned by the manager. + * + * @note: + * When you perform a lookup, out-of-memory errors are detected _within_ + * the lookup and force incremental flushes of the cache until enough + * memory is released for the lookup to succeed. + * + * If a lookup fails with `FT_Err_Out_Of_Memory` the cache has already + * been completely flushed, and still no memory is available for the + * operation. + */ + FT_EXPORT( FT_Error ) + FTC_Manager_LookupSize( FTC_Manager manager, + FTC_Scaler scaler, + FT_Size *asize ); + + + /************************************************************************** + * + * @function: + * FTC_Node_Unref + * + * @description: + * Decrement a cache node's internal reference count. When the count + * reaches 0, it is not destroyed but becomes eligible for subsequent + * cache flushes. + * + * @input: + * node :: + * The cache node handle. + * + * manager :: + * The cache manager handle. + */ + FT_EXPORT( void ) + FTC_Node_Unref( FTC_Node node, + FTC_Manager manager ); + + + /************************************************************************** + * + * @function: + * FTC_Manager_RemoveFaceID + * + * @description: + * A special function used to indicate to the cache manager that a given + * @FTC_FaceID is no longer valid, either because its content changed, or + * because it was deallocated or uninstalled. + * + * @input: + * manager :: + * The cache manager handle. + * + * face_id :: + * The @FTC_FaceID to be removed. + * + * @note: + * This function flushes all nodes from the cache corresponding to this + * `face_id`, with the exception of nodes with a non-null reference + * count. + * + * Such nodes are however modified internally so as to never appear in + * later lookups with the same `face_id` value, and to be immediately + * destroyed when released by all their users. + * + */ + FT_EXPORT( void ) + FTC_Manager_RemoveFaceID( FTC_Manager manager, + FTC_FaceID face_id ); + + + /************************************************************************** + * + * @type: + * FTC_CMapCache + * + * @description: + * An opaque handle used to model a charmap cache. This cache is to hold + * character codes -> glyph indices mappings. + * + */ + typedef struct FTC_CMapCacheRec_* FTC_CMapCache; + + + /************************************************************************** + * + * @function: + * FTC_CMapCache_New + * + * @description: + * Create a new charmap cache. + * + * @input: + * manager :: + * A handle to the cache manager. + * + * @output: + * acache :: + * A new cache handle. `NULL` in case of error. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * Like all other caches, this one will be destroyed with the cache + * manager. + * + */ + FT_EXPORT( FT_Error ) + FTC_CMapCache_New( FTC_Manager manager, + FTC_CMapCache *acache ); + + + /************************************************************************** + * + * @function: + * FTC_CMapCache_Lookup + * + * @description: + * Translate a character code into a glyph index, using the charmap + * cache. + * + * @input: + * cache :: + * A charmap cache handle. + * + * face_id :: + * The source face ID. + * + * cmap_index :: + * The index of the charmap in the source face. Any negative value + * means to use the cache @FT_Face's default charmap. + * + * char_code :: + * The character code (in the corresponding charmap). + * + * @return: + * Glyph index. 0~means 'no glyph'. + * + */ + FT_EXPORT( FT_UInt ) + FTC_CMapCache_Lookup( FTC_CMapCache cache, + FTC_FaceID face_id, + FT_Int cmap_index, + FT_UInt32 char_code ); + + + /*************************************************************************/ + /*************************************************************************/ + /*************************************************************************/ + /***** *****/ + /***** IMAGE CACHE OBJECT *****/ + /***** *****/ + /*************************************************************************/ + /*************************************************************************/ + /*************************************************************************/ + + + /************************************************************************** + * + * @struct: + * FTC_ImageTypeRec + * + * @description: + * A structure used to model the type of images in a glyph cache. + * + * @fields: + * face_id :: + * The face ID. + * + * width :: + * The width in pixels. + * + * height :: + * The height in pixels. + * + * flags :: + * The load flags, as in @FT_Load_Glyph. + * + */ + typedef struct FTC_ImageTypeRec_ + { + FTC_FaceID face_id; + FT_UInt width; + FT_UInt height; + FT_Int32 flags; + + } FTC_ImageTypeRec; + + + /************************************************************************** + * + * @type: + * FTC_ImageType + * + * @description: + * A handle to an @FTC_ImageTypeRec structure. + * + */ + typedef struct FTC_ImageTypeRec_* FTC_ImageType; + + + /* */ + + +#define FTC_IMAGE_TYPE_COMPARE( d1, d2 ) \ + ( (d1)->face_id == (d2)->face_id && \ + (d1)->width == (d2)->width && \ + (d1)->flags == (d2)->flags ) + + + /************************************************************************** + * + * @type: + * FTC_ImageCache + * + * @description: + * A handle to a glyph image cache object. They are designed to hold + * many distinct glyph images while not exceeding a certain memory + * threshold. + */ + typedef struct FTC_ImageCacheRec_* FTC_ImageCache; + + + /************************************************************************** + * + * @function: + * FTC_ImageCache_New + * + * @description: + * Create a new glyph image cache. + * + * @input: + * manager :: + * The parent manager for the image cache. + * + * @output: + * acache :: + * A handle to the new glyph image cache object. + * + * @return: + * FreeType error code. 0~means success. + */ + FT_EXPORT( FT_Error ) + FTC_ImageCache_New( FTC_Manager manager, + FTC_ImageCache *acache ); + + + /************************************************************************** + * + * @function: + * FTC_ImageCache_Lookup + * + * @description: + * Retrieve a given glyph image from a glyph image cache. + * + * @input: + * cache :: + * A handle to the source glyph image cache. + * + * type :: + * A pointer to a glyph image type descriptor. + * + * gindex :: + * The glyph index to retrieve. + * + * @output: + * aglyph :: + * The corresponding @FT_Glyph object. 0~in case of failure. + * + * anode :: + * Used to return the address of the corresponding cache node after + * incrementing its reference count (see note below). + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * The returned glyph is owned and managed by the glyph image cache. + * Never try to transform or discard it manually! You can however create + * a copy with @FT_Glyph_Copy and modify the new one. + * + * If `anode` is _not_ `NULL`, it receives the address of the cache node + * containing the glyph image, after increasing its reference count. + * This ensures that the node (as well as the @FT_Glyph) will always be + * kept in the cache until you call @FTC_Node_Unref to 'release' it. + * + * If `anode` is `NULL`, the cache node is left unchanged, which means + * that the @FT_Glyph could be flushed out of the cache on the next call + * to one of the caching sub-system APIs. Don't assume that it is + * persistent! + */ + FT_EXPORT( FT_Error ) + FTC_ImageCache_Lookup( FTC_ImageCache cache, + FTC_ImageType type, + FT_UInt gindex, + FT_Glyph *aglyph, + FTC_Node *anode ); + + + /************************************************************************** + * + * @function: + * FTC_ImageCache_LookupScaler + * + * @description: + * A variant of @FTC_ImageCache_Lookup that uses an @FTC_ScalerRec to + * specify the face ID and its size. + * + * @input: + * cache :: + * A handle to the source glyph image cache. + * + * scaler :: + * A pointer to a scaler descriptor. + * + * load_flags :: + * The corresponding load flags. + * + * gindex :: + * The glyph index to retrieve. + * + * @output: + * aglyph :: + * The corresponding @FT_Glyph object. 0~in case of failure. + * + * anode :: + * Used to return the address of the corresponding cache node after + * incrementing its reference count (see note below). + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * The returned glyph is owned and managed by the glyph image cache. + * Never try to transform or discard it manually! You can however create + * a copy with @FT_Glyph_Copy and modify the new one. + * + * If `anode` is _not_ `NULL`, it receives the address of the cache node + * containing the glyph image, after increasing its reference count. + * This ensures that the node (as well as the @FT_Glyph) will always be + * kept in the cache until you call @FTC_Node_Unref to 'release' it. + * + * If `anode` is `NULL`, the cache node is left unchanged, which means + * that the @FT_Glyph could be flushed out of the cache on the next call + * to one of the caching sub-system APIs. Don't assume that it is + * persistent! + * + * Calls to @FT_Set_Char_Size and friends have no effect on cached + * glyphs; you should always use the FreeType cache API instead. + */ + FT_EXPORT( FT_Error ) + FTC_ImageCache_LookupScaler( FTC_ImageCache cache, + FTC_Scaler scaler, + FT_ULong load_flags, + FT_UInt gindex, + FT_Glyph *aglyph, + FTC_Node *anode ); + + + /************************************************************************** + * + * @type: + * FTC_SBit + * + * @description: + * A handle to a small bitmap descriptor. See the @FTC_SBitRec structure + * for details. + */ + typedef struct FTC_SBitRec_* FTC_SBit; + + + /************************************************************************** + * + * @struct: + * FTC_SBitRec + * + * @description: + * A very compact structure used to describe a small glyph bitmap. + * + * @fields: + * width :: + * The bitmap width in pixels. + * + * height :: + * The bitmap height in pixels. + * + * left :: + * The horizontal distance from the pen position to the left bitmap + * border (a.k.a. 'left side bearing', or 'lsb'). + * + * top :: + * The vertical distance from the pen position (on the baseline) to the + * upper bitmap border (a.k.a. 'top side bearing'). The distance is + * positive for upwards y~coordinates. + * + * format :: + * The format of the glyph bitmap (monochrome or gray). + * + * max_grays :: + * Maximum gray level value (in the range 1 to~255). + * + * pitch :: + * The number of bytes per bitmap line. May be positive or negative. + * + * xadvance :: + * The horizontal advance width in pixels. + * + * yadvance :: + * The vertical advance height in pixels. + * + * buffer :: + * A pointer to the bitmap pixels. + */ + typedef struct FTC_SBitRec_ + { + FT_Byte width; + FT_Byte height; + FT_Char left; + FT_Char top; + + FT_Byte format; + FT_Byte max_grays; + FT_Short pitch; + FT_Char xadvance; + FT_Char yadvance; + + FT_Byte* buffer; + + } FTC_SBitRec; + + + /************************************************************************** + * + * @type: + * FTC_SBitCache + * + * @description: + * A handle to a small bitmap cache. These are special cache objects + * used to store small glyph bitmaps (and anti-aliased pixmaps) in a much + * more efficient way than the traditional glyph image cache implemented + * by @FTC_ImageCache. + */ + typedef struct FTC_SBitCacheRec_* FTC_SBitCache; + + + /************************************************************************** + * + * @function: + * FTC_SBitCache_New + * + * @description: + * Create a new cache to store small glyph bitmaps. + * + * @input: + * manager :: + * A handle to the source cache manager. + * + * @output: + * acache :: + * A handle to the new sbit cache. `NULL` in case of error. + * + * @return: + * FreeType error code. 0~means success. + */ + FT_EXPORT( FT_Error ) + FTC_SBitCache_New( FTC_Manager manager, + FTC_SBitCache *acache ); + + + /************************************************************************** + * + * @function: + * FTC_SBitCache_Lookup + * + * @description: + * Look up a given small glyph bitmap in a given sbit cache and 'lock' it + * to prevent its flushing from the cache until needed. + * + * @input: + * cache :: + * A handle to the source sbit cache. + * + * type :: + * A pointer to the glyph image type descriptor. + * + * gindex :: + * The glyph index. + * + * @output: + * sbit :: + * A handle to a small bitmap descriptor. + * + * anode :: + * Used to return the address of the corresponding cache node after + * incrementing its reference count (see note below). + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * The small bitmap descriptor and its bit buffer are owned by the cache + * and should never be freed by the application. They might as well + * disappear from memory on the next cache lookup, so don't treat them as + * persistent data. + * + * The descriptor's `buffer` field is set to~0 to indicate a missing + * glyph bitmap. + * + * If `anode` is _not_ `NULL`, it receives the address of the cache node + * containing the bitmap, after increasing its reference count. This + * ensures that the node (as well as the image) will always be kept in + * the cache until you call @FTC_Node_Unref to 'release' it. + * + * If `anode` is `NULL`, the cache node is left unchanged, which means + * that the bitmap could be flushed out of the cache on the next call to + * one of the caching sub-system APIs. Don't assume that it is + * persistent! + */ + FT_EXPORT( FT_Error ) + FTC_SBitCache_Lookup( FTC_SBitCache cache, + FTC_ImageType type, + FT_UInt gindex, + FTC_SBit *sbit, + FTC_Node *anode ); + + + /************************************************************************** + * + * @function: + * FTC_SBitCache_LookupScaler + * + * @description: + * A variant of @FTC_SBitCache_Lookup that uses an @FTC_ScalerRec to + * specify the face ID and its size. + * + * @input: + * cache :: + * A handle to the source sbit cache. + * + * scaler :: + * A pointer to the scaler descriptor. + * + * load_flags :: + * The corresponding load flags. + * + * gindex :: + * The glyph index. + * + * @output: + * sbit :: + * A handle to a small bitmap descriptor. + * + * anode :: + * Used to return the address of the corresponding cache node after + * incrementing its reference count (see note below). + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * The small bitmap descriptor and its bit buffer are owned by the cache + * and should never be freed by the application. They might as well + * disappear from memory on the next cache lookup, so don't treat them as + * persistent data. + * + * The descriptor's `buffer` field is set to~0 to indicate a missing + * glyph bitmap. + * + * If `anode` is _not_ `NULL`, it receives the address of the cache node + * containing the bitmap, after increasing its reference count. This + * ensures that the node (as well as the image) will always be kept in + * the cache until you call @FTC_Node_Unref to 'release' it. + * + * If `anode` is `NULL`, the cache node is left unchanged, which means + * that the bitmap could be flushed out of the cache on the next call to + * one of the caching sub-system APIs. Don't assume that it is + * persistent! + */ + FT_EXPORT( FT_Error ) + FTC_SBitCache_LookupScaler( FTC_SBitCache cache, + FTC_Scaler scaler, + FT_ULong load_flags, + FT_UInt gindex, + FTC_SBit *sbit, + FTC_Node *anode ); + + /* */ + + +FT_END_HEADER + +#endif /* FTCACHE_H_ */ + + +/* END */ diff --git a/dependencies/winx64/include/freetype2/freetype/ftchapters.h b/dependencies/winx64/include/freetype2/freetype/ftchapters.h new file mode 100644 index 0000000..7566fbd --- /dev/null +++ b/dependencies/winx64/include/freetype2/freetype/ftchapters.h @@ -0,0 +1,168 @@ +/**************************************************************************** + * + * This file defines the structure of the FreeType reference. + * It is used by the python script that generates the HTML files. + * + */ + + + /************************************************************************** + * + * @chapter: + * general_remarks + * + * @title: + * General Remarks + * + * @sections: + * preamble + * header_inclusion + * user_allocation + * + */ + + + /************************************************************************** + * + * @chapter: + * core_api + * + * @title: + * Core API + * + * @sections: + * basic_types + * library_setup + * face_creation + * font_testing_macros + * sizing_and_scaling + * glyph_retrieval + * character_mapping + * information_retrieval + * other_api_data + * + */ + + + /************************************************************************** + * + * @chapter: + * extended_api + * + * @title: + * Extended API + * + * @sections: + * glyph_variants + * color_management + * layer_management + * glyph_management + * mac_specific + * sizes_management + * header_file_macros + * + */ + + + /************************************************************************** + * + * @chapter: + * format_specific + * + * @title: + * Format-Specific API + * + * @sections: + * multiple_masters + * truetype_tables + * type1_tables + * sfnt_names + * bdf_fonts + * cid_fonts + * pfr_fonts + * winfnt_fonts + * svg_fonts + * font_formats + * gasp_table + * + */ + + + /************************************************************************** + * + * @chapter: + * module_specific + * + * @title: + * Controlling FreeType Modules + * + * @sections: + * auto_hinter + * cff_driver + * t1_cid_driver + * tt_driver + * pcf_driver + * ot_svg_driver + * properties + * parameter_tags + * lcd_rendering + * + */ + + + /************************************************************************** + * + * @chapter: + * cache_subsystem + * + * @title: + * Cache Sub-System + * + * @sections: + * cache_subsystem + * + */ + + + /************************************************************************** + * + * @chapter: + * support_api + * + * @title: + * Support API + * + * @sections: + * computations + * list_processing + * outline_processing + * quick_advance + * bitmap_handling + * raster + * glyph_stroker + * system_interface + * module_management + * gzip + * lzw + * bzip2 + * debugging_apis + * + */ + + + /************************************************************************** + * + * @chapter: + * error_codes + * + * @title: + * Error Codes + * + * @sections: + * error_enumerations + * error_code_values + * + */ + + +/* END */ diff --git a/dependencies/winx64/include/freetype2/freetype/ftcid.h b/dependencies/winx64/include/freetype2/freetype/ftcid.h new file mode 100644 index 0000000..96b2a90 --- /dev/null +++ b/dependencies/winx64/include/freetype2/freetype/ftcid.h @@ -0,0 +1,167 @@ +/**************************************************************************** + * + * ftcid.h + * + * FreeType API for accessing CID font information (specification). + * + * Copyright (C) 2007-2024 by + * Dereg Clegg and Michael Toftdal. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + +#ifndef FTCID_H_ +#define FTCID_H_ + +#include + +#ifdef FREETYPE_H +#error "freetype.h of FreeType 1 has been loaded!" +#error "Please fix the directory search order for header files" +#error "so that freetype.h of FreeType 2 is found first." +#endif + + +FT_BEGIN_HEADER + + + /************************************************************************** + * + * @section: + * cid_fonts + * + * @title: + * CID Fonts + * + * @abstract: + * CID-keyed font-specific API. + * + * @description: + * This section contains the declaration of CID-keyed font-specific + * functions. + * + */ + + + /************************************************************************** + * + * @function: + * FT_Get_CID_Registry_Ordering_Supplement + * + * @description: + * Retrieve the Registry/Ordering/Supplement triple (also known as the + * "R/O/S") from a CID-keyed font. + * + * @input: + * face :: + * A handle to the input face. + * + * @output: + * registry :: + * The registry, as a C~string, owned by the face. + * + * ordering :: + * The ordering, as a C~string, owned by the face. + * + * supplement :: + * The supplement. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * This function only works with CID faces, returning an error + * otherwise. + * + * @since: + * 2.3.6 + */ + FT_EXPORT( FT_Error ) + FT_Get_CID_Registry_Ordering_Supplement( FT_Face face, + const char* *registry, + const char* *ordering, + FT_Int *supplement ); + + + /************************************************************************** + * + * @function: + * FT_Get_CID_Is_Internally_CID_Keyed + * + * @description: + * Retrieve the type of the input face, CID keyed or not. In contrast + * to the @FT_IS_CID_KEYED macro this function returns successfully also + * for CID-keyed fonts in an SFNT wrapper. + * + * @input: + * face :: + * A handle to the input face. + * + * @output: + * is_cid :: + * The type of the face as an @FT_Bool. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * This function only works with CID faces and OpenType fonts, returning + * an error otherwise. + * + * @since: + * 2.3.9 + */ + FT_EXPORT( FT_Error ) + FT_Get_CID_Is_Internally_CID_Keyed( FT_Face face, + FT_Bool *is_cid ); + + + /************************************************************************** + * + * @function: + * FT_Get_CID_From_Glyph_Index + * + * @description: + * Retrieve the CID of the input glyph index. + * + * @input: + * face :: + * A handle to the input face. + * + * glyph_index :: + * The input glyph index. + * + * @output: + * cid :: + * The CID as an @FT_UInt. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * This function only works with CID faces and OpenType fonts, returning + * an error otherwise. + * + * @since: + * 2.3.9 + */ + FT_EXPORT( FT_Error ) + FT_Get_CID_From_Glyph_Index( FT_Face face, + FT_UInt glyph_index, + FT_UInt *cid ); + + /* */ + + +FT_END_HEADER + +#endif /* FTCID_H_ */ + + +/* END */ diff --git a/dependencies/winx64/include/freetype2/freetype/ftcolor.h b/dependencies/winx64/include/freetype2/freetype/ftcolor.h new file mode 100644 index 0000000..8d0a77a --- /dev/null +++ b/dependencies/winx64/include/freetype2/freetype/ftcolor.h @@ -0,0 +1,1676 @@ +/**************************************************************************** + * + * ftcolor.h + * + * FreeType's glyph color management (specification). + * + * Copyright (C) 2018-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + +#ifndef FTCOLOR_H_ +#define FTCOLOR_H_ + +#include + +#ifdef FREETYPE_H +#error "freetype.h of FreeType 1 has been loaded!" +#error "Please fix the directory search order for header files" +#error "so that freetype.h of FreeType 2 is found first." +#endif + + +FT_BEGIN_HEADER + + + /************************************************************************** + * + * @section: + * color_management + * + * @title: + * Glyph Color Management + * + * @abstract: + * Retrieving and manipulating OpenType's 'CPAL' table data. + * + * @description: + * The functions described here allow access and manipulation of color + * palette entries in OpenType's 'CPAL' tables. + */ + + + /************************************************************************** + * + * @struct: + * FT_Color + * + * @description: + * This structure models a BGRA color value of a 'CPAL' palette entry. + * + * The used color space is sRGB; the colors are not pre-multiplied, and + * alpha values must be explicitly set. + * + * @fields: + * blue :: + * Blue value. + * + * green :: + * Green value. + * + * red :: + * Red value. + * + * alpha :: + * Alpha value, giving the red, green, and blue color's opacity. + * + * @since: + * 2.10 + */ + typedef struct FT_Color_ + { + FT_Byte blue; + FT_Byte green; + FT_Byte red; + FT_Byte alpha; + + } FT_Color; + + + /************************************************************************** + * + * @enum: + * FT_PALETTE_XXX + * + * @description: + * A list of bit field constants used in the `palette_flags` array of the + * @FT_Palette_Data structure to indicate for which background a palette + * with a given index is usable. + * + * @values: + * FT_PALETTE_FOR_LIGHT_BACKGROUND :: + * The palette is appropriate to use when displaying the font on a + * light background such as white. + * + * FT_PALETTE_FOR_DARK_BACKGROUND :: + * The palette is appropriate to use when displaying the font on a dark + * background such as black. + * + * @since: + * 2.10 + */ +#define FT_PALETTE_FOR_LIGHT_BACKGROUND 0x01 +#define FT_PALETTE_FOR_DARK_BACKGROUND 0x02 + + + /************************************************************************** + * + * @struct: + * FT_Palette_Data + * + * @description: + * This structure holds the data of the 'CPAL' table. + * + * @fields: + * num_palettes :: + * The number of palettes. + * + * palette_name_ids :: + * An optional read-only array of palette name IDs with `num_palettes` + * elements, corresponding to entries like 'dark' or 'light' in the + * font's 'name' table. + * + * An empty name ID in the 'CPAL' table gets represented as value + * 0xFFFF. + * + * `NULL` if the font's 'CPAL' table doesn't contain appropriate data. + * + * palette_flags :: + * An optional read-only array of palette flags with `num_palettes` + * elements. Possible values are an ORed combination of + * @FT_PALETTE_FOR_LIGHT_BACKGROUND and + * @FT_PALETTE_FOR_DARK_BACKGROUND. + * + * `NULL` if the font's 'CPAL' table doesn't contain appropriate data. + * + * num_palette_entries :: + * The number of entries in a single palette. All palettes have the + * same size. + * + * palette_entry_name_ids :: + * An optional read-only array of palette entry name IDs with + * `num_palette_entries`. In each palette, entries with the same index + * have the same function. For example, index~0 might correspond to + * string 'outline' in the font's 'name' table to indicate that this + * palette entry is used for outlines, index~1 might correspond to + * 'fill' to indicate the filling color palette entry, etc. + * + * An empty entry name ID in the 'CPAL' table gets represented as value + * 0xFFFF. + * + * `NULL` if the font's 'CPAL' table doesn't contain appropriate data. + * + * @note: + * Use function @FT_Get_Sfnt_Name to map name IDs and entry name IDs to + * name strings. + * + * Use function @FT_Palette_Select to get the colors associated with a + * palette entry. + * + * @since: + * 2.10 + */ + typedef struct FT_Palette_Data_ { + FT_UShort num_palettes; + const FT_UShort* palette_name_ids; + const FT_UShort* palette_flags; + + FT_UShort num_palette_entries; + const FT_UShort* palette_entry_name_ids; + + } FT_Palette_Data; + + + /************************************************************************** + * + * @function: + * FT_Palette_Data_Get + * + * @description: + * Retrieve the face's color palette data. + * + * @input: + * face :: + * The source face handle. + * + * @output: + * apalette :: + * A pointer to an @FT_Palette_Data structure. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * All arrays in the returned @FT_Palette_Data structure are read-only. + * + * This function always returns an error if the config macro + * `TT_CONFIG_OPTION_COLOR_LAYERS` is not defined in `ftoption.h`. + * + * @since: + * 2.10 + */ + FT_EXPORT( FT_Error ) + FT_Palette_Data_Get( FT_Face face, + FT_Palette_Data *apalette ); + + + /************************************************************************** + * + * @function: + * FT_Palette_Select + * + * @description: + * This function has two purposes. + * + * (1) It activates a palette for rendering color glyphs, and + * + * (2) it retrieves all (unmodified) color entries of this palette. This + * function returns a read-write array, which means that a calling + * application can modify the palette entries on demand. + * + * A corollary of (2) is that calling the function, then modifying some + * values, then calling the function again with the same arguments resets + * all color entries to the original 'CPAL' values; all user modifications + * are lost. + * + * @input: + * face :: + * The source face handle. + * + * palette_index :: + * The palette index. + * + * @output: + * apalette :: + * An array of color entries for a palette with index `palette_index`, + * having `num_palette_entries` elements (as found in the + * `FT_Palette_Data` structure). If `apalette` is set to `NULL`, no + * array gets returned (and no color entries can be modified). + * + * In case the font doesn't support color palettes, `NULL` is returned. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * The array pointed to by `apalette_entries` is owned and managed by + * FreeType. + * + * This function always returns an error if the config macro + * `TT_CONFIG_OPTION_COLOR_LAYERS` is not defined in `ftoption.h`. + * + * @since: + * 2.10 + */ + FT_EXPORT( FT_Error ) + FT_Palette_Select( FT_Face face, + FT_UShort palette_index, + FT_Color* *apalette ); + + + /************************************************************************** + * + * @function: + * FT_Palette_Set_Foreground_Color + * + * @description: + * 'COLR' uses palette index 0xFFFF to indicate a 'text foreground + * color'. This function sets this value. + * + * @input: + * face :: + * The source face handle. + * + * foreground_color :: + * An `FT_Color` structure to define the text foreground color. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * If this function isn't called, the text foreground color is set to + * white opaque (BGRA value 0xFFFFFFFF) if + * @FT_PALETTE_FOR_DARK_BACKGROUND is present for the current palette, + * and black opaque (BGRA value 0x000000FF) otherwise, including the case + * that no palette types are available in the 'CPAL' table. + * + * This function always returns an error if the config macro + * `TT_CONFIG_OPTION_COLOR_LAYERS` is not defined in `ftoption.h`. + * + * @since: + * 2.10 + */ + FT_EXPORT( FT_Error ) + FT_Palette_Set_Foreground_Color( FT_Face face, + FT_Color foreground_color ); + + + /************************************************************************** + * + * @section: + * layer_management + * + * @title: + * Glyph Layer Management + * + * @abstract: + * Retrieving and manipulating OpenType's 'COLR' table data. + * + * @description: + * The functions described here allow access of colored glyph layer data + * in OpenType's 'COLR' tables. + * + * Note that FreeType does *not* provide rendering in general of glyphs + * that use a 'COLR' table! While FreeType has very limited rendering + * support for 'COLR' v0 tables (without a possibility to change the + * color palette) via @FT_Render_Glyph, there is no such convenience + * code for 'COLR' v1 tables -- while it appears that v1 is simply an + * 'improved' version of v0, this is not the case: it is a completely + * different color font format, and you need a dedicated graphics + * library like Skia or Cairo to handle a v1 table's drawing commands. + */ + + + /************************************************************************** + * + * @struct: + * FT_LayerIterator + * + * @description: + * This iterator object is needed for @FT_Get_Color_Glyph_Layer. + * + * @fields: + * num_layers :: + * The number of glyph layers for the requested glyph index. Will be + * set by @FT_Get_Color_Glyph_Layer. + * + * layer :: + * The current layer. Will be set by @FT_Get_Color_Glyph_Layer. + * + * p :: + * An opaque pointer into 'COLR' table data. The caller must set this + * to `NULL` before the first call of @FT_Get_Color_Glyph_Layer. + */ + typedef struct FT_LayerIterator_ + { + FT_UInt num_layers; + FT_UInt layer; + FT_Byte* p; + + } FT_LayerIterator; + + + /************************************************************************** + * + * @function: + * FT_Get_Color_Glyph_Layer + * + * @description: + * This is an interface to the 'COLR' table in OpenType fonts to + * iteratively retrieve the colored glyph layers associated with the + * current glyph slot. + * + * https://learn.microsoft.com/typography/opentype/spec/colr + * + * The glyph layer data for a given glyph index, if present, provides an + * alternative, multi-color glyph representation: Instead of rendering + * the outline or bitmap with the given glyph index, glyphs with the + * indices and colors returned by this function are rendered layer by + * layer. + * + * The returned elements are ordered in the z~direction from bottom to + * top; the 'n'th element should be rendered with the associated palette + * color and blended on top of the already rendered layers (elements 0, + * 1, ..., n-1). + * + * @input: + * face :: + * A handle to the parent face object. + * + * base_glyph :: + * The glyph index the colored glyph layers are associated with. + * + * @inout: + * iterator :: + * An @FT_LayerIterator object. For the first call you should set + * `iterator->p` to `NULL`. For all following calls, simply use the + * same object again. + * + * @output: + * aglyph_index :: + * The glyph index of the current layer. + * + * acolor_index :: + * The color index into the font face's color palette of the current + * layer. The value 0xFFFF is special; it doesn't reference a palette + * entry but indicates that the text foreground color should be used + * instead (to be set up by the application outside of FreeType). + * + * The color palette can be retrieved with @FT_Palette_Select. + * + * @return: + * Value~1 if everything is OK. If there are no more layers (or if there + * are no layers at all), value~0 gets returned. In case of an error, + * value~0 is returned also. + * + * @note: + * This function is necessary if you want to handle glyph layers by + * yourself. In particular, functions that operate with @FT_GlyphRec + * objects (like @FT_Get_Glyph or @FT_Glyph_To_Bitmap) don't have access + * to this information. + * + * Note that @FT_Render_Glyph is able to handle colored glyph layers + * automatically if the @FT_LOAD_COLOR flag is passed to a previous call + * to @FT_Load_Glyph. [This is an experimental feature.] + * + * @example: + * ``` + * FT_Color* palette; + * FT_LayerIterator iterator; + * + * FT_Bool have_layers; + * FT_UInt layer_glyph_index; + * FT_UInt layer_color_index; + * + * + * error = FT_Palette_Select( face, palette_index, &palette ); + * if ( error ) + * palette = NULL; + * + * iterator.p = NULL; + * have_layers = FT_Get_Color_Glyph_Layer( face, + * glyph_index, + * &layer_glyph_index, + * &layer_color_index, + * &iterator ); + * + * if ( palette && have_layers ) + * { + * do + * { + * FT_Color layer_color; + * + * + * if ( layer_color_index == 0xFFFF ) + * layer_color = text_foreground_color; + * else + * layer_color = palette[layer_color_index]; + * + * // Load and render glyph `layer_glyph_index', then + * // blend resulting pixmap (using color `layer_color') + * // with previously created pixmaps. + * + * } while ( FT_Get_Color_Glyph_Layer( face, + * glyph_index, + * &layer_glyph_index, + * &layer_color_index, + * &iterator ) ); + * } + * ``` + * + * @since: + * 2.10 + */ + FT_EXPORT( FT_Bool ) + FT_Get_Color_Glyph_Layer( FT_Face face, + FT_UInt base_glyph, + FT_UInt *aglyph_index, + FT_UInt *acolor_index, + FT_LayerIterator* iterator ); + + + /************************************************************************** + * + * @enum: + * FT_PaintFormat + * + * @description: + * Enumeration describing the different paint format types of the v1 + * extensions to the 'COLR' table, see + * 'https://github.com/googlefonts/colr-gradients-spec'. + * + * The enumeration values loosely correspond with the format numbers of + * the specification: FreeType always returns a fully specified 'Paint' + * structure for the 'Transform', 'Translate', 'Scale', 'Rotate', and + * 'Skew' table types even though the specification has different formats + * depending on whether or not a center is specified, whether the scale + * is uniform in x and y~direction or not, etc. Also, only non-variable + * format identifiers are listed in this enumeration; as soon as support + * for variable 'COLR' v1 fonts is implemented, interpolation is + * performed dependent on axis coordinates, which are configured on the + * @FT_Face through @FT_Set_Var_Design_Coordinates. This implies that + * always static, readily interpolated values are returned in the 'Paint' + * structures. + * + * @since: + * 2.13 + */ + typedef enum FT_PaintFormat_ + { + FT_COLR_PAINTFORMAT_COLR_LAYERS = 1, + FT_COLR_PAINTFORMAT_SOLID = 2, + FT_COLR_PAINTFORMAT_LINEAR_GRADIENT = 4, + FT_COLR_PAINTFORMAT_RADIAL_GRADIENT = 6, + FT_COLR_PAINTFORMAT_SWEEP_GRADIENT = 8, + FT_COLR_PAINTFORMAT_GLYPH = 10, + FT_COLR_PAINTFORMAT_COLR_GLYPH = 11, + FT_COLR_PAINTFORMAT_TRANSFORM = 12, + FT_COLR_PAINTFORMAT_TRANSLATE = 14, + FT_COLR_PAINTFORMAT_SCALE = 16, + FT_COLR_PAINTFORMAT_ROTATE = 24, + FT_COLR_PAINTFORMAT_SKEW = 28, + FT_COLR_PAINTFORMAT_COMPOSITE = 32, + FT_COLR_PAINT_FORMAT_MAX = 33, + FT_COLR_PAINTFORMAT_UNSUPPORTED = 255 + + } FT_PaintFormat; + + + /************************************************************************** + * + * @struct: + * FT_ColorStopIterator + * + * @description: + * This iterator object is needed for @FT_Get_Colorline_Stops. It keeps + * state while iterating over the stops of an @FT_ColorLine, representing + * the `ColorLine` struct of the v1 extensions to 'COLR', see + * 'https://github.com/googlefonts/colr-gradients-spec'. Do not manually + * modify fields of this iterator. + * + * @fields: + * num_color_stops :: + * The number of color stops for the requested glyph index. Set by + * @FT_Get_Paint. + * + * current_color_stop :: + * The current color stop. Set by @FT_Get_Colorline_Stops. + * + * p :: + * An opaque pointer into 'COLR' table data. Set by @FT_Get_Paint. + * Updated by @FT_Get_Colorline_Stops. + * + * read_variable :: + * A boolean keeping track of whether variable color lines are to be + * read. Set by @FT_Get_Paint. + * + * @since: + * 2.13 + */ + typedef struct FT_ColorStopIterator_ + { + FT_UInt num_color_stops; + FT_UInt current_color_stop; + + FT_Byte* p; + + FT_Bool read_variable; + + } FT_ColorStopIterator; + + + /************************************************************************** + * + * @struct: + * FT_ColorIndex + * + * @description: + * A structure representing a `ColorIndex` value of the 'COLR' v1 + * extensions, see 'https://github.com/googlefonts/colr-gradients-spec'. + * + * @fields: + * palette_index :: + * The palette index into a 'CPAL' palette. + * + * alpha :: + * Alpha transparency value multiplied with the value from 'CPAL'. + * + * @since: + * 2.13 + */ + typedef struct FT_ColorIndex_ + { + FT_UInt16 palette_index; + FT_F2Dot14 alpha; + + } FT_ColorIndex; + + + /************************************************************************** + * + * @struct: + * FT_ColorStop + * + * @description: + * A structure representing a `ColorStop` value of the 'COLR' v1 + * extensions, see 'https://github.com/googlefonts/colr-gradients-spec'. + * + * @fields: + * stop_offset :: + * The stop offset along the gradient, expressed as a 16.16 fixed-point + * coordinate. + * + * color :: + * The color information for this stop, see @FT_ColorIndex. + * + * @since: + * 2.13 + */ + typedef struct FT_ColorStop_ + { + FT_Fixed stop_offset; + FT_ColorIndex color; + + } FT_ColorStop; + + + /************************************************************************** + * + * @enum: + * FT_PaintExtend + * + * @description: + * An enumeration representing the 'Extend' mode of the 'COLR' v1 + * extensions, see 'https://github.com/googlefonts/colr-gradients-spec'. + * It describes how the gradient fill continues at the other boundaries. + * + * @since: + * 2.13 + */ + typedef enum FT_PaintExtend_ + { + FT_COLR_PAINT_EXTEND_PAD = 0, + FT_COLR_PAINT_EXTEND_REPEAT = 1, + FT_COLR_PAINT_EXTEND_REFLECT = 2 + + } FT_PaintExtend; + + + /************************************************************************** + * + * @struct: + * FT_ColorLine + * + * @description: + * A structure representing a `ColorLine` value of the 'COLR' v1 + * extensions, see 'https://github.com/googlefonts/colr-gradients-spec'. + * It describes a list of color stops along the defined gradient. + * + * @fields: + * extend :: + * The extend mode at the outer boundaries, see @FT_PaintExtend. + * + * color_stop_iterator :: + * The @FT_ColorStopIterator used to enumerate and retrieve the + * actual @FT_ColorStop's. + * + * @since: + * 2.13 + */ + typedef struct FT_ColorLine_ + { + FT_PaintExtend extend; + FT_ColorStopIterator color_stop_iterator; + + } FT_ColorLine; + + + /************************************************************************** + * + * @struct: + * FT_Affine23 + * + * @description: + * A structure used to store a 2x3 matrix. Coefficients are in + * 16.16 fixed-point format. The computation performed is + * + * ``` + * x' = x*xx + y*xy + dx + * y' = x*yx + y*yy + dy + * ``` + * + * @fields: + * xx :: + * Matrix coefficient. + * + * xy :: + * Matrix coefficient. + * + * dx :: + * x translation. + * + * yx :: + * Matrix coefficient. + * + * yy :: + * Matrix coefficient. + * + * dy :: + * y translation. + * + * @since: + * 2.13 + */ + typedef struct FT_Affine_23_ + { + FT_Fixed xx, xy, dx; + FT_Fixed yx, yy, dy; + + } FT_Affine23; + + + /************************************************************************** + * + * @enum: + * FT_Composite_Mode + * + * @description: + * An enumeration listing the 'COLR' v1 composite modes used in + * @FT_PaintComposite. For more details on each paint mode, see + * 'https://www.w3.org/TR/compositing-1/#porterduffcompositingoperators'. + * + * @since: + * 2.13 + */ + typedef enum FT_Composite_Mode_ + { + FT_COLR_COMPOSITE_CLEAR = 0, + FT_COLR_COMPOSITE_SRC = 1, + FT_COLR_COMPOSITE_DEST = 2, + FT_COLR_COMPOSITE_SRC_OVER = 3, + FT_COLR_COMPOSITE_DEST_OVER = 4, + FT_COLR_COMPOSITE_SRC_IN = 5, + FT_COLR_COMPOSITE_DEST_IN = 6, + FT_COLR_COMPOSITE_SRC_OUT = 7, + FT_COLR_COMPOSITE_DEST_OUT = 8, + FT_COLR_COMPOSITE_SRC_ATOP = 9, + FT_COLR_COMPOSITE_DEST_ATOP = 10, + FT_COLR_COMPOSITE_XOR = 11, + FT_COLR_COMPOSITE_PLUS = 12, + FT_COLR_COMPOSITE_SCREEN = 13, + FT_COLR_COMPOSITE_OVERLAY = 14, + FT_COLR_COMPOSITE_DARKEN = 15, + FT_COLR_COMPOSITE_LIGHTEN = 16, + FT_COLR_COMPOSITE_COLOR_DODGE = 17, + FT_COLR_COMPOSITE_COLOR_BURN = 18, + FT_COLR_COMPOSITE_HARD_LIGHT = 19, + FT_COLR_COMPOSITE_SOFT_LIGHT = 20, + FT_COLR_COMPOSITE_DIFFERENCE = 21, + FT_COLR_COMPOSITE_EXCLUSION = 22, + FT_COLR_COMPOSITE_MULTIPLY = 23, + FT_COLR_COMPOSITE_HSL_HUE = 24, + FT_COLR_COMPOSITE_HSL_SATURATION = 25, + FT_COLR_COMPOSITE_HSL_COLOR = 26, + FT_COLR_COMPOSITE_HSL_LUMINOSITY = 27, + FT_COLR_COMPOSITE_MAX = 28 + + } FT_Composite_Mode; + + + /************************************************************************** + * + * @struct: + * FT_OpaquePaint + * + * @description: + * A structure representing an offset to a `Paint` value stored in any + * of the paint tables of a 'COLR' v1 font. Compare Offset<24> there. + * When 'COLR' v1 paint tables represented by FreeType objects such as + * @FT_PaintColrLayers, @FT_PaintComposite, or @FT_PaintTransform + * reference downstream nested paint tables, we do not immediately + * retrieve them but encapsulate their location in this type. Use + * @FT_Get_Paint to retrieve the actual @FT_COLR_Paint object that + * describes the details of the respective paint table. + * + * @fields: + * p :: + * An internal offset to a Paint table, needs to be set to NULL before + * passing this struct as an argument to @FT_Get_Paint. + * + * insert_root_transform :: + * An internal boolean to track whether an initial root transform is + * to be provided. Do not set this value. + * + * @since: + * 2.13 + */ + typedef struct FT_Opaque_Paint_ + { + FT_Byte* p; + FT_Bool insert_root_transform; + } FT_OpaquePaint; + + + /************************************************************************** + * + * @struct: + * FT_PaintColrLayers + * + * @description: + * A structure representing a `PaintColrLayers` table of a 'COLR' v1 + * font. This table describes a set of layers that are to be composited + * with composite mode `FT_COLR_COMPOSITE_SRC_OVER`. The return value + * of this function is an @FT_LayerIterator initialized so that it can + * be used with @FT_Get_Paint_Layers to retrieve the @FT_OpaquePaint + * objects as references to each layer. + * + * @fields: + * layer_iterator :: + * The layer iterator that describes the layers of this paint. + * + * @since: + * 2.13 + */ + typedef struct FT_PaintColrLayers_ + { + FT_LayerIterator layer_iterator; + + } FT_PaintColrLayers; + + + /************************************************************************** + * + * @struct: + * FT_PaintSolid + * + * @description: + * A structure representing a `PaintSolid` value of the 'COLR' v1 + * extensions, see 'https://github.com/googlefonts/colr-gradients-spec'. + * Using a `PaintSolid` value means that the glyph layer filled with + * this paint is solid-colored and does not contain a gradient. + * + * @fields: + * color :: + * The color information for this solid paint, see @FT_ColorIndex. + * + * @since: + * 2.13 + */ + typedef struct FT_PaintSolid_ + { + FT_ColorIndex color; + + } FT_PaintSolid; + + + /************************************************************************** + * + * @struct: + * FT_PaintLinearGradient + * + * @description: + * A structure representing a `PaintLinearGradient` value of the 'COLR' + * v1 extensions, see + * 'https://github.com/googlefonts/colr-gradients-spec'. The glyph + * layer filled with this paint is drawn filled with a linear gradient. + * + * @fields: + * colorline :: + * The @FT_ColorLine information for this paint, i.e., the list of + * color stops along the gradient. + * + * p0 :: + * The starting point of the gradient definition in font units + * represented as a 16.16 fixed-point `FT_Vector`. + * + * p1 :: + * The end point of the gradient definition in font units + * represented as a 16.16 fixed-point `FT_Vector`. + * + * p2 :: + * Optional point~p2 to rotate the gradient in font units + * represented as a 16.16 fixed-point `FT_Vector`. + * Otherwise equal to~p0. + * + * @since: + * 2.13 + */ + typedef struct FT_PaintLinearGradient_ + { + FT_ColorLine colorline; + + /* TODO: Potentially expose those as x0, y0 etc. */ + FT_Vector p0; + FT_Vector p1; + FT_Vector p2; + + } FT_PaintLinearGradient; + + + /************************************************************************** + * + * @struct: + * FT_PaintRadialGradient + * + * @description: + * A structure representing a `PaintRadialGradient` value of the 'COLR' + * v1 extensions, see + * 'https://github.com/googlefonts/colr-gradients-spec'. The glyph + * layer filled with this paint is drawn filled with a radial gradient. + * + * @fields: + * colorline :: + * The @FT_ColorLine information for this paint, i.e., the list of + * color stops along the gradient. + * + * c0 :: + * The center of the starting point of the radial gradient in font + * units represented as a 16.16 fixed-point `FT_Vector`. + * + * r0 :: + * The radius of the starting circle of the radial gradient in font + * units represented as a 16.16 fixed-point value. + * + * c1 :: + * The center of the end point of the radial gradient in font units + * represented as a 16.16 fixed-point `FT_Vector`. + * + * r1 :: + * The radius of the end circle of the radial gradient in font + * units represented as a 16.16 fixed-point value. + * + * @since: + * 2.13 + */ + typedef struct FT_PaintRadialGradient_ + { + FT_ColorLine colorline; + + FT_Vector c0; + FT_Pos r0; + FT_Vector c1; + FT_Pos r1; + + } FT_PaintRadialGradient; + + + /************************************************************************** + * + * @struct: + * FT_PaintSweepGradient + * + * @description: + * A structure representing a `PaintSweepGradient` value of the 'COLR' + * v1 extensions, see + * 'https://github.com/googlefonts/colr-gradients-spec'. The glyph + * layer filled with this paint is drawn filled with a sweep gradient + * from `start_angle` to `end_angle`. + * + * @fields: + * colorline :: + * The @FT_ColorLine information for this paint, i.e., the list of + * color stops along the gradient. + * + * center :: + * The center of the sweep gradient in font units represented as a + * vector of 16.16 fixed-point values. + * + * start_angle :: + * The start angle of the sweep gradient in 16.16 fixed-point + * format specifying degrees divided by 180.0 (as in the + * spec). Multiply by 180.0f to receive degrees value. Values are + * given counter-clockwise, starting from the (positive) y~axis. + * + * end_angle :: + * The end angle of the sweep gradient in 16.16 fixed-point + * format specifying degrees divided by 180.0 (as in the + * spec). Multiply by 180.0f to receive degrees value. Values are + * given counter-clockwise, starting from the (positive) y~axis. + * + * @since: + * 2.13 + */ + typedef struct FT_PaintSweepGradient_ + { + FT_ColorLine colorline; + + FT_Vector center; + FT_Fixed start_angle; + FT_Fixed end_angle; + + } FT_PaintSweepGradient; + + + /************************************************************************** + * + * @struct: + * FT_PaintGlyph + * + * @description: + * A structure representing a 'COLR' v1 `PaintGlyph` paint table. + * + * @fields: + * paint :: + * An opaque paint object pointing to a `Paint` table that serves as + * the fill for the glyph ID. + * + * glyphID :: + * The glyph ID from the 'glyf' table, which serves as the contour + * information that is filled with paint. + * + * @since: + * 2.13 + */ + typedef struct FT_PaintGlyph_ + { + FT_OpaquePaint paint; + FT_UInt glyphID; + + } FT_PaintGlyph; + + + /************************************************************************** + * + * @struct: + * FT_PaintColrGlyph + * + * @description: + * A structure representing a 'COLR' v1 `PaintColorGlyph` paint table. + * + * @fields: + * glyphID :: + * The glyph ID from the `BaseGlyphV1List` table that is drawn for + * this paint. + * + * @since: + * 2.13 + */ + typedef struct FT_PaintColrGlyph_ + { + FT_UInt glyphID; + + } FT_PaintColrGlyph; + + + /************************************************************************** + * + * @struct: + * FT_PaintTransform + * + * @description: + * A structure representing a 'COLR' v1 `PaintTransform` paint table. + * + * @fields: + * paint :: + * An opaque paint that is subject to being transformed. + * + * affine :: + * A 2x3 transformation matrix in @FT_Affine23 format containing + * 16.16 fixed-point values. + * + * @since: + * 2.13 + */ + typedef struct FT_PaintTransform_ + { + FT_OpaquePaint paint; + FT_Affine23 affine; + + } FT_PaintTransform; + + + /************************************************************************** + * + * @struct: + * FT_PaintTranslate + * + * @description: + * A structure representing a 'COLR' v1 `PaintTranslate` paint table. + * Used for translating downstream paints by a given x and y~delta. + * + * @fields: + * paint :: + * An @FT_OpaquePaint object referencing the paint that is to be + * rotated. + * + * dx :: + * Translation in x~direction in font units represented as a + * 16.16 fixed-point value. + * + * dy :: + * Translation in y~direction in font units represented as a + * 16.16 fixed-point value. + * + * @since: + * 2.13 + */ + typedef struct FT_PaintTranslate_ + { + FT_OpaquePaint paint; + + FT_Fixed dx; + FT_Fixed dy; + + } FT_PaintTranslate; + + + /************************************************************************** + * + * @struct: + * FT_PaintScale + * + * @description: + * A structure representing all of the 'COLR' v1 'PaintScale*' paint + * tables. Used for scaling downstream paints by a given x and y~scale, + * with a given center. This structure is used for all 'PaintScale*' + * types that are part of specification; fields of this structure are + * filled accordingly. If there is a center, the center values are set, + * otherwise they are set to the zero coordinate. If the source font + * file has 'PaintScaleUniform*' set, the scale values are set + * accordingly to the same value. + * + * @fields: + * paint :: + * An @FT_OpaquePaint object referencing the paint that is to be + * scaled. + * + * scale_x :: + * Scale factor in x~direction represented as a + * 16.16 fixed-point value. + * + * scale_y :: + * Scale factor in y~direction represented as a + * 16.16 fixed-point value. + * + * center_x :: + * x~coordinate of center point to scale from represented as a + * 16.16 fixed-point value. + * + * center_y :: + * y~coordinate of center point to scale from represented as a + * 16.16 fixed-point value. + * + * @since: + * 2.13 + */ + typedef struct FT_PaintScale_ + { + FT_OpaquePaint paint; + + FT_Fixed scale_x; + FT_Fixed scale_y; + + FT_Fixed center_x; + FT_Fixed center_y; + + } FT_PaintScale; + + + /************************************************************************** + * + * @struct: + * FT_PaintRotate + * + * @description: + * A structure representing a 'COLR' v1 `PaintRotate` paint table. Used + * for rotating downstream paints with a given center and angle. + * + * @fields: + * paint :: + * An @FT_OpaquePaint object referencing the paint that is to be + * rotated. + * + * angle :: + * The rotation angle that is to be applied in degrees divided by + * 180.0 (as in the spec) represented as a 16.16 fixed-point + * value. Multiply by 180.0f to receive degrees value. + * + * center_x :: + * The x~coordinate of the pivot point of the rotation in font + * units represented as a 16.16 fixed-point value. + * + * center_y :: + * The y~coordinate of the pivot point of the rotation in font + * units represented as a 16.16 fixed-point value. + * + * @since: + * 2.13 + */ + + typedef struct FT_PaintRotate_ + { + FT_OpaquePaint paint; + + FT_Fixed angle; + + FT_Fixed center_x; + FT_Fixed center_y; + + } FT_PaintRotate; + + + /************************************************************************** + * + * @struct: + * FT_PaintSkew + * + * @description: + * A structure representing a 'COLR' v1 `PaintSkew` paint table. Used + * for skewing or shearing downstream paints by a given center and + * angle. + * + * @fields: + * paint :: + * An @FT_OpaquePaint object referencing the paint that is to be + * skewed. + * + * x_skew_angle :: + * The skewing angle in x~direction in degrees divided by 180.0 + * (as in the spec) represented as a 16.16 fixed-point + * value. Multiply by 180.0f to receive degrees. + * + * y_skew_angle :: + * The skewing angle in y~direction in degrees divided by 180.0 + * (as in the spec) represented as a 16.16 fixed-point + * value. Multiply by 180.0f to receive degrees. + * + * center_x :: + * The x~coordinate of the pivot point of the skew in font units + * represented as a 16.16 fixed-point value. + * + * center_y :: + * The y~coordinate of the pivot point of the skew in font units + * represented as a 16.16 fixed-point value. + * + * @since: + * 2.13 + */ + typedef struct FT_PaintSkew_ + { + FT_OpaquePaint paint; + + FT_Fixed x_skew_angle; + FT_Fixed y_skew_angle; + + FT_Fixed center_x; + FT_Fixed center_y; + + } FT_PaintSkew; + + + /************************************************************************** + * + * @struct: + * FT_PaintComposite + * + * @description: + * A structure representing a 'COLR' v1 `PaintComposite` paint table. + * Used for compositing two paints in a 'COLR' v1 directed acyclic graph. + * + * @fields: + * source_paint :: + * An @FT_OpaquePaint object referencing the source that is to be + * composited. + * + * composite_mode :: + * An @FT_Composite_Mode enum value determining the composition + * operation. + * + * backdrop_paint :: + * An @FT_OpaquePaint object referencing the backdrop paint that + * `source_paint` is composited onto. + * + * @since: + * 2.13 + */ + typedef struct FT_PaintComposite_ + { + FT_OpaquePaint source_paint; + FT_Composite_Mode composite_mode; + FT_OpaquePaint backdrop_paint; + + } FT_PaintComposite; + + + /************************************************************************** + * + * @union: + * FT_COLR_Paint + * + * @description: + * A union object representing format and details of a paint table of a + * 'COLR' v1 font, see + * 'https://github.com/googlefonts/colr-gradients-spec'. Use + * @FT_Get_Paint to retrieve a @FT_COLR_Paint for an @FT_OpaquePaint + * object. + * + * @fields: + * format :: + * The gradient format for this Paint structure. + * + * u :: + * Union of all paint table types: + * + * * @FT_PaintColrLayers + * * @FT_PaintGlyph + * * @FT_PaintSolid + * * @FT_PaintLinearGradient + * * @FT_PaintRadialGradient + * * @FT_PaintSweepGradient + * * @FT_PaintTransform + * * @FT_PaintTranslate + * * @FT_PaintRotate + * * @FT_PaintSkew + * * @FT_PaintComposite + * * @FT_PaintColrGlyph + * + * @since: + * 2.13 + */ + typedef struct FT_COLR_Paint_ + { + FT_PaintFormat format; + + union + { + FT_PaintColrLayers colr_layers; + FT_PaintGlyph glyph; + FT_PaintSolid solid; + FT_PaintLinearGradient linear_gradient; + FT_PaintRadialGradient radial_gradient; + FT_PaintSweepGradient sweep_gradient; + FT_PaintTransform transform; + FT_PaintTranslate translate; + FT_PaintScale scale; + FT_PaintRotate rotate; + FT_PaintSkew skew; + FT_PaintComposite composite; + FT_PaintColrGlyph colr_glyph; + + } u; + + } FT_COLR_Paint; + + + /************************************************************************** + * + * @enum: + * FT_Color_Root_Transform + * + * @description: + * An enumeration to specify whether @FT_Get_Color_Glyph_Paint is to + * return a root transform to configure the client's graphics context + * matrix. + * + * @values: + * FT_COLOR_INCLUDE_ROOT_TRANSFORM :: + * Do include the root transform as the initial @FT_COLR_Paint object. + * + * FT_COLOR_NO_ROOT_TRANSFORM :: + * Do not output an initial root transform. + * + * @since: + * 2.13 + */ + typedef enum FT_Color_Root_Transform_ + { + FT_COLOR_INCLUDE_ROOT_TRANSFORM, + FT_COLOR_NO_ROOT_TRANSFORM, + + FT_COLOR_ROOT_TRANSFORM_MAX + + } FT_Color_Root_Transform; + + + /************************************************************************** + * + * @struct: + * FT_ClipBox + * + * @description: + * A structure representing a 'COLR' v1 'ClipBox' table. 'COLR' v1 + * glyphs may optionally define a clip box for aiding allocation or + * defining a maximum drawable region. Use @FT_Get_Color_Glyph_ClipBox + * to retrieve it. + * + * @fields: + * bottom_left :: + * The bottom left corner of the clip box as an @FT_Vector with + * fixed-point coordinates in 26.6 format. + * + * top_left :: + * The top left corner of the clip box as an @FT_Vector with + * fixed-point coordinates in 26.6 format. + * + * top_right :: + * The top right corner of the clip box as an @FT_Vector with + * fixed-point coordinates in 26.6 format. + * + * bottom_right :: + * The bottom right corner of the clip box as an @FT_Vector with + * fixed-point coordinates in 26.6 format. + * + * @since: + * 2.13 + */ + typedef struct FT_ClipBox_ + { + FT_Vector bottom_left; + FT_Vector top_left; + FT_Vector top_right; + FT_Vector bottom_right; + + } FT_ClipBox; + + + /************************************************************************** + * + * @function: + * FT_Get_Color_Glyph_Paint + * + * @description: + * This is the starting point and interface to color gradient + * information in a 'COLR' v1 table in OpenType fonts to recursively + * retrieve the paint tables for the directed acyclic graph of a colored + * glyph, given a glyph ID. + * + * https://github.com/googlefonts/colr-gradients-spec + * + * In a 'COLR' v1 font, each color glyph defines a directed acyclic + * graph of nested paint tables, such as `PaintGlyph`, `PaintSolid`, + * `PaintLinearGradient`, `PaintRadialGradient`, and so on. Using this + * function and specifying a glyph ID, one retrieves the root paint + * table for this glyph ID. + * + * This function allows control whether an initial root transform is + * returned to configure scaling, transform, and translation correctly + * on the client's graphics context. The initial root transform is + * computed and returned according to the values configured for @FT_Size + * and @FT_Set_Transform on the @FT_Face object, see below for details + * of the `root_transform` parameter. This has implications for a + * client 'COLR' v1 implementation: When this function returns an + * initially computed root transform, at the time of executing the + * @FT_PaintGlyph operation, the contours should be retrieved using + * @FT_Load_Glyph at unscaled, untransformed size. This is because the + * root transform applied to the graphics context will take care of + * correct scaling. + * + * Alternatively, to allow hinting of contours, at the time of executing + * @FT_Load_Glyph, the current graphics context transformation matrix + * can be decomposed into a scaling matrix and a remainder, and + * @FT_Load_Glyph can be used to retrieve the contours at scaled size. + * Care must then be taken to blit or clip to the graphics context with + * taking this remainder transformation into account. + * + * @input: + * face :: + * A handle to the parent face object. + * + * base_glyph :: + * The glyph index for which to retrieve the root paint table. + * + * root_transform :: + * Specifies whether an initially computed root is returned by the + * @FT_PaintTransform operation to account for the activated size + * (see @FT_Activate_Size) and the configured transform and translate + * (see @FT_Set_Transform). + * + * This root transform is returned before nodes of the glyph graph of + * the font are returned. Subsequent @FT_COLR_Paint structures + * contain unscaled and untransformed values. The inserted root + * transform enables the client application to apply an initial + * transform to its graphics context. When executing subsequent + * FT_COLR_Paint operations, values from @FT_COLR_Paint operations + * will ultimately be correctly scaled because of the root transform + * applied to the graphics context. Use + * @FT_COLOR_INCLUDE_ROOT_TRANSFORM to include the root transform, use + * @FT_COLOR_NO_ROOT_TRANSFORM to not include it. The latter may be + * useful when traversing the 'COLR' v1 glyph graph and reaching a + * @FT_PaintColrGlyph. When recursing into @FT_PaintColrGlyph and + * painting that inline, no additional root transform is needed as it + * has already been applied to the graphics context at the beginning + * of drawing this glyph. + * + * @output: + * paint :: + * The @FT_OpaquePaint object that references the actual paint table. + * + * The respective actual @FT_COLR_Paint object is retrieved via + * @FT_Get_Paint. + * + * @return: + * Value~1 if everything is OK. If no color glyph is found, or the root + * paint could not be retrieved, value~0 gets returned. In case of an + * error, value~0 is returned also. + * + * @since: + * 2.13 + */ + FT_EXPORT( FT_Bool ) + FT_Get_Color_Glyph_Paint( FT_Face face, + FT_UInt base_glyph, + FT_Color_Root_Transform root_transform, + FT_OpaquePaint* paint ); + + + /************************************************************************** + * + * @function: + * FT_Get_Color_Glyph_ClipBox + * + * @description: + * Search for a 'COLR' v1 clip box for the specified `base_glyph` and + * fill the `clip_box` parameter with the 'COLR' v1 'ClipBox' information + * if one is found. + * + * @input: + * face :: + * A handle to the parent face object. + * + * base_glyph :: + * The glyph index for which to retrieve the clip box. + * + * @output: + * clip_box :: + * The clip box for the requested `base_glyph` if one is found. The + * clip box is computed taking scale and transformations configured on + * the @FT_Face into account. @FT_ClipBox contains @FT_Vector values + * in 26.6 format. + * + * @return: + * Value~1 if a clip box is found. If no clip box is found or an error + * occurred, value~0 is returned. + * + * @note: + * To retrieve the clip box in font units, reset scale to units-per-em + * and remove transforms configured using @FT_Set_Transform. + * + * @since: + * 2.13 + */ + FT_EXPORT( FT_Bool ) + FT_Get_Color_Glyph_ClipBox( FT_Face face, + FT_UInt base_glyph, + FT_ClipBox* clip_box ); + + + /************************************************************************** + * + * @function: + * FT_Get_Paint_Layers + * + * @description: + * Access the layers of a `PaintColrLayers` table. + * + * If the root paint of a color glyph, or a nested paint of a 'COLR' + * glyph is a `PaintColrLayers` table, this function retrieves the + * layers of the `PaintColrLayers` table. + * + * The @FT_PaintColrLayers object contains an @FT_LayerIterator, which + * is used here to iterate over the layers. Each layer is returned as + * an @FT_OpaquePaint object, which then can be used with @FT_Get_Paint + * to retrieve the actual paint object. + * + * @input: + * face :: + * A handle to the parent face object. + * + * @inout: + * iterator :: + * The @FT_LayerIterator from an @FT_PaintColrLayers object, for which + * the layers are to be retrieved. The internal state of the iterator + * is incremented after one call to this function for retrieving one + * layer. + * + * @output: + * paint :: + * The @FT_OpaquePaint object that references the actual paint table. + * The respective actual @FT_COLR_Paint object is retrieved via + * @FT_Get_Paint. + * + * @return: + * Value~1 if everything is OK. Value~0 gets returned when the paint + * object can not be retrieved or any other error occurs. + * + * @since: + * 2.13 + */ + FT_EXPORT( FT_Bool ) + FT_Get_Paint_Layers( FT_Face face, + FT_LayerIterator* iterator, + FT_OpaquePaint* paint ); + + + /************************************************************************** + * + * @function: + * FT_Get_Colorline_Stops + * + * @description: + * This is an interface to color gradient information in a 'COLR' v1 + * table in OpenType fonts to iteratively retrieve the gradient and + * solid fill information for colored glyph layers for a specified glyph + * ID. + * + * https://github.com/googlefonts/colr-gradients-spec + * + * @input: + * face :: + * A handle to the parent face object. + * + * @inout: + * iterator :: + * The retrieved @FT_ColorStopIterator, configured on an @FT_ColorLine, + * which in turn got retrieved via paint information in + * @FT_PaintLinearGradient or @FT_PaintRadialGradient. + * + * @output: + * color_stop :: + * Color index and alpha value for the retrieved color stop. + * + * @return: + * Value~1 if everything is OK. If there are no more color stops, + * value~0 gets returned. In case of an error, value~0 is returned + * also. + * + * @since: + * 2.13 + */ + FT_EXPORT( FT_Bool ) + FT_Get_Colorline_Stops( FT_Face face, + FT_ColorStop* color_stop, + FT_ColorStopIterator* iterator ); + + + /************************************************************************** + * + * @function: + * FT_Get_Paint + * + * @description: + * Access the details of a paint using an @FT_OpaquePaint opaque paint + * object, which internally stores the offset to the respective `Paint` + * object in the 'COLR' table. + * + * @input: + * face :: + * A handle to the parent face object. + * + * opaque_paint :: + * The opaque paint object for which the underlying @FT_COLR_Paint + * data is to be retrieved. + * + * @output: + * paint :: + * The specific @FT_COLR_Paint object containing information coming + * from one of the font's `Paint*` tables. + * + * @return: + * Value~1 if everything is OK. Value~0 if no details can be found for + * this paint or any other error occurred. + * + * @since: + * 2.13 + */ + FT_EXPORT( FT_Bool ) + FT_Get_Paint( FT_Face face, + FT_OpaquePaint opaque_paint, + FT_COLR_Paint* paint ); + + /* */ + + +FT_END_HEADER + +#endif /* FTCOLOR_H_ */ + + +/* END */ diff --git a/dependencies/winx64/include/freetype2/freetype/ftdriver.h b/dependencies/winx64/include/freetype2/freetype/ftdriver.h new file mode 100644 index 0000000..3e84687 --- /dev/null +++ b/dependencies/winx64/include/freetype2/freetype/ftdriver.h @@ -0,0 +1,1320 @@ +/**************************************************************************** + * + * ftdriver.h + * + * FreeType API for controlling driver modules (specification only). + * + * Copyright (C) 2017-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + +#ifndef FTDRIVER_H_ +#define FTDRIVER_H_ + +#include +#include + +#ifdef FREETYPE_H +#error "freetype.h of FreeType 1 has been loaded!" +#error "Please fix the directory search order for header files" +#error "so that freetype.h of FreeType 2 is found first." +#endif + + +FT_BEGIN_HEADER + + + /************************************************************************** + * + * @section: + * auto_hinter + * + * @title: + * The auto-hinter + * + * @abstract: + * Controlling the auto-hinting module. + * + * @description: + * While FreeType's auto-hinter doesn't expose API functions by itself, + * it is possible to control its behaviour with @FT_Property_Set and + * @FT_Property_Get. The following lists the available properties + * together with the necessary macros and structures. + * + * Note that the auto-hinter's module name is 'autofitter' for historical + * reasons. + * + * Available properties are @increase-x-height, @no-stem-darkening + * (experimental), @darkening-parameters (experimental), + * @glyph-to-script-map (experimental), @fallback-script (experimental), + * and @default-script (experimental), as documented in the @properties + * section. + * + */ + + + /************************************************************************** + * + * @section: + * cff_driver + * + * @title: + * The CFF driver + * + * @abstract: + * Controlling the CFF driver module. + * + * @description: + * While FreeType's CFF driver doesn't expose API functions by itself, it + * is possible to control its behaviour with @FT_Property_Set and + * @FT_Property_Get. + * + * The CFF driver's module name is 'cff'. + * + * Available properties are @hinting-engine, @no-stem-darkening, + * @darkening-parameters, and @random-seed, as documented in the + * @properties section. + * + * + * **Hinting and anti-aliasing principles of the new engine** + * + * The rasterizer is positioning horizontal features (e.g., ascender + * height & x-height, or crossbars) on the pixel grid and minimizing the + * amount of anti-aliasing applied to them, while placing vertical + * features (vertical stems) on the pixel grid without hinting, thus + * representing the stem position and weight accurately. Sometimes the + * vertical stems may be only partially black. In this context, + * 'anti-aliasing' means that stems are not positioned exactly on pixel + * borders, causing a fuzzy appearance. + * + * There are two principles behind this approach. + * + * 1) No hinting in the horizontal direction: Unlike 'superhinted' + * TrueType, which changes glyph widths to accommodate regular + * inter-glyph spacing, Adobe's approach is 'faithful to the design' in + * representing both the glyph width and the inter-glyph spacing designed + * for the font. This makes the screen display as close as it can be to + * the result one would get with infinite resolution, while preserving + * what is considered the key characteristics of each glyph. Note that + * the distances between unhinted and grid-fitted positions at small + * sizes are comparable to kerning values and thus would be noticeable + * (and distracting) while reading if hinting were applied. + * + * One of the reasons to not hint horizontally is anti-aliasing for LCD + * screens: The pixel geometry of modern displays supplies three vertical + * subpixels as the eye moves horizontally across each visible pixel. On + * devices where we can be certain this characteristic is present a + * rasterizer can take advantage of the subpixels to add increments of + * weight. In Western writing systems this turns out to be the more + * critical direction anyway; the weights and spacing of vertical stems + * (see above) are central to Armenian, Cyrillic, Greek, and Latin type + * designs. Even when the rasterizer uses greyscale anti-aliasing instead + * of color (a necessary compromise when one doesn't know the screen + * characteristics), the unhinted vertical features preserve the design's + * weight and spacing much better than aliased type would. + * + * 2) Alignment in the vertical direction: Weights and spacing along the + * y~axis are less critical; what is much more important is the visual + * alignment of related features (like cap-height and x-height). The + * sense of alignment for these is enhanced by the sharpness of grid-fit + * edges, while the cruder vertical resolution (full pixels instead of + * 1/3 pixels) is less of a problem. + * + * On the technical side, horizontal alignment zones for ascender, + * x-height, and other important height values (traditionally called + * 'blue zones') as defined in the font are positioned independently, + * each being rounded to the nearest pixel edge, taking care of overshoot + * suppression at small sizes, stem darkening, and scaling. + * + * Hstems (that is, hint values defined in the font to help align + * horizontal features) that fall within a blue zone are said to be + * 'captured' and are aligned to that zone. Uncaptured stems are moved + * in one of four ways, top edge up or down, bottom edge up or down. + * Unless there are conflicting hstems, the smallest movement is taken to + * minimize distortion. + * + */ + + + /************************************************************************** + * + * @section: + * pcf_driver + * + * @title: + * The PCF driver + * + * @abstract: + * Controlling the PCF driver module. + * + * @description: + * While FreeType's PCF driver doesn't expose API functions by itself, it + * is possible to control its behaviour with @FT_Property_Set and + * @FT_Property_Get. Right now, there is a single property + * @no-long-family-names available if FreeType is compiled with + * PCF_CONFIG_OPTION_LONG_FAMILY_NAMES. + * + * The PCF driver's module name is 'pcf'. + * + */ + + + /************************************************************************** + * + * @section: + * t1_cid_driver + * + * @title: + * The Type 1 and CID drivers + * + * @abstract: + * Controlling the Type~1 and CID driver modules. + * + * @description: + * It is possible to control the behaviour of FreeType's Type~1 and + * Type~1 CID drivers with @FT_Property_Set and @FT_Property_Get. + * + * Behind the scenes, both drivers use the Adobe CFF engine for hinting; + * however, the used properties must be specified separately. + * + * The Type~1 driver's module name is 'type1'; the CID driver's module + * name is 't1cid'. + * + * Available properties are @hinting-engine, @no-stem-darkening, + * @darkening-parameters, and @random-seed, as documented in the + * @properties section. + * + * Please see the @cff_driver section for more details on the new hinting + * engine. + * + */ + + + /************************************************************************** + * + * @section: + * tt_driver + * + * @title: + * The TrueType driver + * + * @abstract: + * Controlling the TrueType driver module. + * + * @description: + * While FreeType's TrueType driver doesn't expose API functions by + * itself, it is possible to control its behaviour with @FT_Property_Set + * and @FT_Property_Get. + * + * The TrueType driver's module name is 'truetype'; a single property + * @interpreter-version is available, as documented in the @properties + * section. + * + * To help understand the differences between interpreter versions, we + * introduce a list of definitions, kindly provided by Greg Hitchcock. + * + * _Bi-Level Rendering_ + * + * Monochromatic rendering, exclusively used in the early days of + * TrueType by both Apple and Microsoft. Microsoft's GDI interface + * supported hinting of the right-side bearing point, such that the + * advance width could be non-linear. Most often this was done to + * achieve some level of glyph symmetry. To enable reasonable + * performance (e.g., not having to run hinting on all glyphs just to get + * the widths) there was a bit in the head table indicating if the side + * bearing was hinted, and additional tables, 'hdmx' and 'LTSH', to cache + * hinting widths across multiple sizes and device aspect ratios. + * + * _Font Smoothing_ + * + * Microsoft's GDI implementation of anti-aliasing. Not traditional + * anti-aliasing as the outlines were hinted before the sampling. The + * widths matched the bi-level rendering. + * + * _ClearType Rendering_ + * + * Technique that uses physical subpixels to improve rendering on LCD + * (and other) displays. Because of the higher resolution, many methods + * of improving symmetry in glyphs through hinting the right-side bearing + * were no longer necessary. This lead to what GDI calls 'natural + * widths' ClearType, see + * http://rastertragedy.com/RTRCh4.htm#Sec21. Since hinting + * has extra resolution, most non-linearity went away, but it is still + * possible for hints to change the advance widths in this mode. + * + * _ClearType Compatible Widths_ + * + * One of the earliest challenges with ClearType was allowing the + * implementation in GDI to be selected without requiring all UI and + * documents to reflow. To address this, a compatible method of + * rendering ClearType was added where the font hints are executed once + * to determine the width in bi-level rendering, and then re-run in + * ClearType, with the difference in widths being absorbed in the font + * hints for ClearType (mostly in the white space of hints); see + * http://rastertragedy.com/RTRCh4.htm#Sec20. Somewhat by + * definition, compatible width ClearType allows for non-linear widths, + * but only when the bi-level version has non-linear widths. + * + * _ClearType Subpixel Positioning_ + * + * One of the nice benefits of ClearType is the ability to more crisply + * display fractional widths; unfortunately, the GDI model of integer + * bitmaps did not support this. However, the WPF and Direct Write + * frameworks do support fractional widths. DWrite calls this 'natural + * mode', not to be confused with GDI's 'natural widths'. Subpixel + * positioning, in the current implementation of Direct Write, + * unfortunately does not support hinted advance widths, see + * http://rastertragedy.com/RTRCh4.htm#Sec22. Note that the + * TrueType interpreter fully allows the advance width to be adjusted in + * this mode, just the DWrite client will ignore those changes. + * + * _ClearType Backward Compatibility_ + * + * This is a set of exceptions made in the TrueType interpreter to + * minimize hinting techniques that were problematic with the extra + * resolution of ClearType; see + * http://rastertragedy.com/RTRCh4.htm#Sec1 and + * https://learn.microsoft.com/typography/cleartype/truetypecleartype. + * This technique is not to be confused with ClearType compatible widths. + * ClearType backward compatibility has no direct impact on changing + * advance widths, but there might be an indirect impact on disabling + * some deltas. This could be worked around in backward compatibility + * mode. + * + * _Native ClearType Mode_ + * + * (Not to be confused with 'natural widths'.) This mode removes all the + * exceptions in the TrueType interpreter when running with ClearType. + * Any issues on widths would still apply, though. + * + */ + + + /************************************************************************** + * + * @section: + * ot_svg_driver + * + * @title: + * The SVG driver + * + * @abstract: + * Controlling the external rendering of OT-SVG glyphs. + * + * @description: + * By default, FreeType can only load the 'SVG~' table of OpenType fonts + * if configuration macro `FT_CONFIG_OPTION_SVG` is defined. To make it + * render SVG glyphs, an external SVG rendering library is needed. All + * details on the interface between FreeType and the external library + * via function hooks can be found in section @svg_fonts. + * + * The OT-SVG driver's module name is 'ot-svg'; it supports a single + * property called @svg-hooks, documented below in the @properties + * section. + * + */ + + + /************************************************************************** + * + * @section: + * properties + * + * @title: + * Driver properties + * + * @abstract: + * Controlling driver modules. + * + * @description: + * Driver modules can be controlled by setting and unsetting properties, + * using the functions @FT_Property_Set and @FT_Property_Get. This + * section documents the available properties, together with auxiliary + * macros and structures. + * + */ + + + /************************************************************************** + * + * @enum: + * FT_HINTING_XXX + * + * @description: + * A list of constants used for the @hinting-engine property to select + * the hinting engine for CFF, Type~1, and CID fonts. + * + * @values: + * FT_HINTING_FREETYPE :: + * Use the old FreeType hinting engine. + * + * FT_HINTING_ADOBE :: + * Use the hinting engine contributed by Adobe. + * + * @since: + * 2.9 + * + */ +#define FT_HINTING_FREETYPE 0 +#define FT_HINTING_ADOBE 1 + + /* these constants (introduced in 2.4.12) are deprecated */ +#define FT_CFF_HINTING_FREETYPE FT_HINTING_FREETYPE +#define FT_CFF_HINTING_ADOBE FT_HINTING_ADOBE + + + /************************************************************************** + * + * @property: + * hinting-engine + * + * @description: + * Thanks to Adobe, which contributed a new hinting (and parsing) engine, + * an application can select between 'freetype' and 'adobe' if compiled + * with `CFF_CONFIG_OPTION_OLD_ENGINE`. If this configuration macro + * isn't defined, 'hinting-engine' does nothing. + * + * The same holds for the Type~1 and CID modules if compiled with + * `T1_CONFIG_OPTION_OLD_ENGINE`. + * + * For the 'cff' module, the default engine is 'adobe'. For both the + * 'type1' and 't1cid' modules, the default engine is 'adobe', too. + * + * @note: + * This property can be used with @FT_Property_Get also. + * + * This property can be set via the `FREETYPE_PROPERTIES` environment + * variable (using values 'adobe' or 'freetype'). + * + * @example: + * The following example code demonstrates how to select Adobe's hinting + * engine for the 'cff' module (omitting the error handling). + * + * ``` + * FT_Library library; + * FT_UInt hinting_engine = FT_HINTING_ADOBE; + * + * + * FT_Init_FreeType( &library ); + * + * FT_Property_Set( library, "cff", + * "hinting-engine", &hinting_engine ); + * ``` + * + * @since: + * 2.4.12 (for 'cff' module) + * + * 2.9 (for 'type1' and 't1cid' modules) + * + */ + + + /************************************************************************** + * + * @property: + * no-stem-darkening + * + * @description: + * All glyphs that pass through the auto-hinter will be emboldened unless + * this property is set to TRUE. The same is true for the CFF, Type~1, + * and CID font modules if the 'Adobe' engine is selected (which is the + * default). + * + * Stem darkening emboldens glyphs at smaller sizes to make them more + * readable on common low-DPI screens when using linear alpha blending + * and gamma correction, see @FT_Render_Glyph. When not using linear + * alpha blending and gamma correction, glyphs will appear heavy and + * fuzzy! + * + * Gamma correction essentially lightens fonts since shades of grey are + * shifted to higher pixel values (=~higher brightness) to match the + * original intention to the reality of our screens. The side-effect is + * that glyphs 'thin out'. Mac OS~X and Adobe's proprietary font + * rendering library implement a counter-measure: stem darkening at + * smaller sizes where shades of gray dominate. By emboldening a glyph + * slightly in relation to its pixel size, individual pixels get higher + * coverage of filled-in outlines and are therefore 'blacker'. This + * counteracts the 'thinning out' of glyphs, making text remain readable + * at smaller sizes. + * + * For the auto-hinter, stem-darkening is experimental currently and thus + * switched off by default (that is, `no-stem-darkening` is set to TRUE + * by default). Total consistency with the CFF driver is not achieved + * right now because the emboldening method differs and glyphs must be + * scaled down on the Y-axis to keep outline points inside their + * precomputed blue zones. The smaller the size (especially 9ppem and + * down), the higher the loss of emboldening versus the CFF driver. + * + * Note that stem darkening is never applied if @FT_LOAD_NO_SCALE is set. + * + * @note: + * This property can be used with @FT_Property_Get also. + * + * This property can be set via the `FREETYPE_PROPERTIES` environment + * variable (using values 1 and 0 for 'on' and 'off', respectively). It + * can also be set per face using @FT_Face_Properties with + * @FT_PARAM_TAG_STEM_DARKENING. + * + * @example: + * ``` + * FT_Library library; + * FT_Bool no_stem_darkening = TRUE; + * + * + * FT_Init_FreeType( &library ); + * + * FT_Property_Set( library, "cff", + * "no-stem-darkening", &no_stem_darkening ); + * ``` + * + * @since: + * 2.4.12 (for 'cff' module) + * + * 2.6.2 (for 'autofitter' module) + * + * 2.9 (for 'type1' and 't1cid' modules) + * + */ + + + /************************************************************************** + * + * @property: + * darkening-parameters + * + * @description: + * By default, the Adobe hinting engine, as used by the CFF, Type~1, and + * CID font drivers, darkens stems as follows (if the `no-stem-darkening` + * property isn't set): + * + * ``` + * stem width <= 0.5px: darkening amount = 0.4px + * stem width = 1px: darkening amount = 0.275px + * stem width = 1.667px: darkening amount = 0.275px + * stem width >= 2.333px: darkening amount = 0px + * ``` + * + * and piecewise linear in-between. At configuration time, these four + * control points can be set with the macro + * `CFF_CONFIG_OPTION_DARKENING_PARAMETERS`; the CFF, Type~1, and CID + * drivers share these values. At runtime, the control points can be + * changed using the `darkening-parameters` property (see the example + * below that demonstrates this for the Type~1 driver). + * + * The x~values give the stem width, and the y~values the darkening + * amount. The unit is 1000th of pixels. All coordinate values must be + * positive; the x~values must be monotonically increasing; the y~values + * must be monotonically decreasing and smaller than or equal to 500 + * (corresponding to half a pixel); the slope of each linear piece must + * be shallower than -1 (e.g., -.4). + * + * The auto-hinter provides this property, too, as an experimental + * feature. See @no-stem-darkening for more. + * + * @note: + * This property can be used with @FT_Property_Get also. + * + * This property can be set via the `FREETYPE_PROPERTIES` environment + * variable, using eight comma-separated integers without spaces. Here + * the above example, using `\` to break the line for readability. + * + * ``` + * FREETYPE_PROPERTIES=\ + * type1:darkening-parameters=500,300,1000,200,1500,100,2000,0 + * ``` + * + * @example: + * ``` + * FT_Library library; + * FT_Int darken_params[8] = { 500, 300, // x1, y1 + * 1000, 200, // x2, y2 + * 1500, 100, // x3, y3 + * 2000, 0 }; // x4, y4 + * + * + * FT_Init_FreeType( &library ); + * + * FT_Property_Set( library, "type1", + * "darkening-parameters", darken_params ); + * ``` + * + * @since: + * 2.5.1 (for 'cff' module) + * + * 2.6.2 (for 'autofitter' module) + * + * 2.9 (for 'type1' and 't1cid' modules) + * + */ + + + /************************************************************************** + * + * @property: + * random-seed + * + * @description: + * By default, the seed value for the CFF 'random' operator and the + * similar '0 28 callothersubr pop' command for the Type~1 and CID + * drivers is set to a random value. However, mainly for debugging + * purposes, it is often necessary to use a known value as a seed so that + * the pseudo-random number sequences generated by 'random' are + * repeatable. + * + * The `random-seed` property does that. Its argument is a signed 32bit + * integer; if the value is zero or negative, the seed given by the + * `intitialRandomSeed` private DICT operator in a CFF file gets used (or + * a default value if there is no such operator). If the value is + * positive, use it instead of `initialRandomSeed`, which is consequently + * ignored. + * + * @note: + * This property can be set via the `FREETYPE_PROPERTIES` environment + * variable. It can also be set per face using @FT_Face_Properties with + * @FT_PARAM_TAG_RANDOM_SEED. + * + * @since: + * 2.8 (for 'cff' module) + * + * 2.9 (for 'type1' and 't1cid' modules) + * + */ + + + /************************************************************************** + * + * @property: + * no-long-family-names + * + * @description: + * If `PCF_CONFIG_OPTION_LONG_FAMILY_NAMES` is active while compiling + * FreeType, the PCF driver constructs long family names. + * + * There are many PCF fonts just called 'Fixed' which look completely + * different, and which have nothing to do with each other. When + * selecting 'Fixed' in KDE or Gnome one gets results that appear rather + * random, the style changes often if one changes the size and one cannot + * select some fonts at all. The improve this situation, the PCF module + * prepends the foundry name (plus a space) to the family name. It also + * checks whether there are 'wide' characters; all put together, family + * names like 'Sony Fixed' or 'Misc Fixed Wide' are constructed. + * + * If `no-long-family-names` is set, this feature gets switched off. + * + * @note: + * This property can be used with @FT_Property_Get also. + * + * This property can be set via the `FREETYPE_PROPERTIES` environment + * variable (using values 1 and 0 for 'on' and 'off', respectively). + * + * @example: + * ``` + * FT_Library library; + * FT_Bool no_long_family_names = TRUE; + * + * + * FT_Init_FreeType( &library ); + * + * FT_Property_Set( library, "pcf", + * "no-long-family-names", + * &no_long_family_names ); + * ``` + * + * @since: + * 2.8 + */ + + + /************************************************************************** + * + * @enum: + * TT_INTERPRETER_VERSION_XXX + * + * @description: + * A list of constants used for the @interpreter-version property to + * select the hinting engine for Truetype fonts. + * + * The numeric value in the constant names represents the version number + * as returned by the 'GETINFO' bytecode instruction. + * + * @values: + * TT_INTERPRETER_VERSION_35 :: + * Version~35 corresponds to MS rasterizer v.1.7 as used e.g. in + * Windows~98; only grayscale and B/W rasterizing is supported. + * + * TT_INTERPRETER_VERSION_38 :: + * Version~38 is the same Version~40. The original 'Infinality' code is + * no longer available. + * + * TT_INTERPRETER_VERSION_40 :: + * Version~40 corresponds to MS rasterizer v.2.1; it is roughly + * equivalent to the hinting provided by DirectWrite ClearType (as can + * be found, for example, in Microsoft's Edge Browser on Windows~10). + * It is used in FreeType to select the 'minimal' subpixel hinting + * code, a stripped-down and higher performance version of the + * 'Infinality' code. + * + * @note: + * This property controls the behaviour of the bytecode interpreter and + * thus how outlines get hinted. It does **not** control how glyph get + * rasterized! In particular, it does not control subpixel color + * filtering. + * + * If FreeType has not been compiled with the configuration option + * `TT_CONFIG_OPTION_SUBPIXEL_HINTING`, selecting version~38 or~40 causes + * an `FT_Err_Unimplemented_Feature` error. + * + * Depending on the graphics framework, Microsoft uses different bytecode + * and rendering engines. As a consequence, the version numbers returned + * by a call to the 'GETINFO' bytecode instruction are more convoluted + * than desired. + * + * Here are two tables that try to shed some light on the possible values + * for the MS rasterizer engine, together with the additional features + * introduced by it. + * + * ``` + * GETINFO framework version feature + * ------------------------------------------------------------------- + * 3 GDI (Win 3.1), v1.0 16-bit, first version + * TrueImage + * 33 GDI (Win NT 3.1), v1.5 32-bit + * HP Laserjet + * 34 GDI (Win 95) v1.6 font smoothing, + * new SCANTYPE opcode + * 35 GDI (Win 98/2000) v1.7 (UN)SCALED_COMPONENT_OFFSET + * bits in composite glyphs + * 36 MGDI (Win CE 2) v1.6+ classic ClearType + * 37 GDI (XP and later), v1.8 ClearType + * GDI+ old (before Vista) + * 38 GDI+ old (Vista, Win 7), v1.9 subpixel ClearType, + * WPF Y-direction ClearType, + * additional error checking + * 39 DWrite (before Win 8) v2.0 subpixel ClearType flags + * in GETINFO opcode, + * bug fixes + * 40 GDI+ (after Win 7), v2.1 Y-direction ClearType flag + * DWrite (Win 8) in GETINFO opcode, + * Gray ClearType + * ``` + * + * The 'version' field gives a rough orientation only, since some + * applications provided certain features much earlier (as an example, + * Microsoft Reader used subpixel and Y-direction ClearType already in + * Windows 2000). Similarly, updates to a given framework might include + * improved hinting support. + * + * ``` + * version sampling rendering comment + * x y x y + * -------------------------------------------------------------- + * v1.0 normal normal B/W B/W bi-level + * v1.6 high high gray gray grayscale + * v1.8 high normal color-filter B/W (GDI) ClearType + * v1.9 high high color-filter gray Color ClearType + * v2.1 high normal gray B/W Gray ClearType + * v2.1 high high gray gray Gray ClearType + * ``` + * + * Color and Gray ClearType are the two available variants of + * 'Y-direction ClearType', meaning grayscale rasterization along the + * Y-direction; the name used in the TrueType specification for this + * feature is 'symmetric smoothing'. 'Classic ClearType' is the original + * algorithm used before introducing a modified version in Win~XP. + * Another name for v1.6's grayscale rendering is 'font smoothing', and + * 'Color ClearType' is sometimes also called 'DWrite ClearType'. To + * differentiate between today's Color ClearType and the earlier + * ClearType variant with B/W rendering along the vertical axis, the + * latter is sometimes called 'GDI ClearType'. + * + * 'Normal' and 'high' sampling describe the (virtual) resolution to + * access the rasterized outline after the hinting process. 'Normal' + * means 1 sample per grid line (i.e., B/W). In the current Microsoft + * implementation, 'high' means an extra virtual resolution of 16x16 (or + * 16x1) grid lines per pixel for bytecode instructions like 'MIRP'. + * After hinting, these 16 grid lines are mapped to 6x5 (or 6x1) grid + * lines for color filtering if Color ClearType is activated. + * + * Note that 'Gray ClearType' is essentially the same as v1.6's grayscale + * rendering. However, the GETINFO instruction handles it differently: + * v1.6 returns bit~12 (hinting for grayscale), while v2.1 returns + * bits~13 (hinting for ClearType), 18 (symmetrical smoothing), and~19 + * (Gray ClearType). Also, this mode respects bits 2 and~3 for the + * version~1 gasp table exclusively (like Color ClearType), while v1.6 + * only respects the values of version~0 (bits 0 and~1). + * + * Keep in mind that the features of the above interpreter versions might + * not map exactly to FreeType features or behavior because it is a + * fundamentally different library with different internals. + * + */ +#define TT_INTERPRETER_VERSION_35 35 +#define TT_INTERPRETER_VERSION_38 38 +#define TT_INTERPRETER_VERSION_40 40 + + + /************************************************************************** + * + * @property: + * interpreter-version + * + * @description: + * Currently, three versions are available, two representing the bytecode + * interpreter with subpixel hinting support (old 'Infinality' code and + * new stripped-down and higher performance 'minimal' code) and one + * without, respectively. The default is subpixel support if + * `TT_CONFIG_OPTION_SUBPIXEL_HINTING` is defined, and no subpixel + * support otherwise (since it isn't available then). + * + * If subpixel hinting is on, many TrueType bytecode instructions behave + * differently compared to B/W or grayscale rendering (except if 'native + * ClearType' is selected by the font). Microsoft's main idea is to + * render at a much increased horizontal resolution, then sampling down + * the created output to subpixel precision. However, many older fonts + * are not suited to this and must be specially taken care of by applying + * (hardcoded) tweaks in Microsoft's interpreter. + * + * Details on subpixel hinting and some of the necessary tweaks can be + * found in Greg Hitchcock's whitepaper at + * 'https://learn.microsoft.com/typography/cleartype/truetypecleartype'. + * Note that FreeType currently doesn't really 'subpixel hint' (6x1, 6x2, + * or 6x5 supersampling) like discussed in the paper. Depending on the + * chosen interpreter, it simply ignores instructions on vertical stems + * to arrive at very similar results. + * + * @note: + * This property can be used with @FT_Property_Get also. + * + * This property can be set via the `FREETYPE_PROPERTIES` environment + * variable (using values '35', '38', or '40'). + * + * @example: + * The following example code demonstrates how to deactivate subpixel + * hinting (omitting the error handling). + * + * ``` + * FT_Library library; + * FT_Face face; + * FT_UInt interpreter_version = TT_INTERPRETER_VERSION_35; + * + * + * FT_Init_FreeType( &library ); + * + * FT_Property_Set( library, "truetype", + * "interpreter-version", + * &interpreter_version ); + * ``` + * + * @since: + * 2.5 + */ + + + /************************************************************************** + * + * @property: + * spread + * + * @description: + * This property of the 'sdf' and 'bsdf' renderers defines how the signed + * distance field (SDF) is represented in the output bitmap. The output + * values are calculated as follows, '128 * ( SDF / spread + 1 )', with + * the result clamped to the 8-bit range [0..255]. Therefore, 'spread' + * is also the maximum euclidean distance from the edge after which the + * values are clamped. The spread is specified in pixels with the + * default value of 8. For accurate SDF texture mapping (interpolation), + * the spread should be large enough to accommodate the target grid unit. + * + * @example: + * The following example code demonstrates how to set the SDF spread + * (omitting the error handling). + * + * ``` + * FT_Library library; + * FT_Int spread = 2; + * + * + * FT_Init_FreeType( &library ); + * + * FT_Property_Set( library, "sdf", "spread", &spread ); + * ``` + * + * @note: + * FreeType has two rasterizers for generating SDF, namely: + * + * 1. `sdf` for generating SDF directly from glyph's outline, and + * + * 2. `bsdf` for generating SDF from rasterized bitmaps. + * + * Depending on the glyph type (i.e., outline or bitmap), one of the two + * rasterizers is chosen at runtime and used for generating SDFs. To + * force the use of `bsdf` you should render the glyph with any of the + * FreeType's other rendering modes (e.g., `FT_RENDER_MODE_NORMAL`) and + * then re-render with `FT_RENDER_MODE_SDF`. + * + * There are some issues with stability and possible failures of the SDF + * renderers (specifically `sdf`). + * + * 1. The `sdf` rasterizer is sensitive to really small features (e.g., + * sharp turns that are less than 1~pixel) and imperfections in the + * glyph's outline, causing artifacts in the final output. + * + * 2. The `sdf` rasterizer has limited support for handling intersecting + * contours and *cannot* handle self-intersecting contours whatsoever. + * Self-intersection happens when a single connected contour + * intersects itself at some point; having these in your font + * definitely poses a problem to the rasterizer and cause artifacts, + * too. + * + * 3. Generating SDF for really small glyphs may result in undesirable + * output; the pixel grid (which stores distance information) becomes + * too coarse. + * + * 4. Since the output buffer is normalized, precision at smaller spreads + * is greater than precision at larger spread values because the + * output range of [0..255] gets mapped to a smaller SDF range. A + * spread of~2 should be sufficient in most cases. + * + * Points (1) and (2) can be avoided by using the `bsdf` rasterizer, + * which is more stable than the `sdf` rasterizer in general. + * + * @since: + * 2.11 + */ + + + /************************************************************************** + * + * @property: + * svg-hooks + * + * @description: + * Set up the interface between FreeType and an extern SVG rendering + * library like 'librsvg'. All details on the function hooks can be + * found in section @svg_fonts. + * + * @example: + * The following example code expects that the four hook functions + * `svg_*` are defined elsewhere. Error handling is omitted, too. + * + * ``` + * FT_Library library; + * SVG_RendererHooks hooks = { + * (SVG_Lib_Init_Func)svg_init, + * (SVG_Lib_Free_Func)svg_free, + * (SVG_Lib_Render_Func)svg_render, + * (SVG_Lib_Preset_Slot_Func)svg_preset_slot }; + * + * + * FT_Init_FreeType( &library ); + * + * FT_Property_Set( library, "ot-svg", + * "svg-hooks", &hooks ); + * ``` + * + * @since: + * 2.12 + */ + + + /************************************************************************** + * + * @property: + * glyph-to-script-map + * + * @description: + * **Experimental only** + * + * The auto-hinter provides various script modules to hint glyphs. + * Examples of supported scripts are Latin or CJK. Before a glyph is + * auto-hinted, the Unicode character map of the font gets examined, and + * the script is then determined based on Unicode character ranges, see + * below. + * + * OpenType fonts, however, often provide much more glyphs than character + * codes (small caps, superscripts, ligatures, swashes, etc.), to be + * controlled by so-called 'features'. Handling OpenType features can be + * quite complicated and thus needs a separate library on top of + * FreeType. + * + * The mapping between glyph indices and scripts (in the auto-hinter + * sense, see the @FT_AUTOHINTER_SCRIPT_XXX values) is stored as an array + * with `num_glyphs` elements, as found in the font's @FT_Face structure. + * The `glyph-to-script-map` property returns a pointer to this array, + * which can be modified as needed. Note that the modification should + * happen before the first glyph gets processed by the auto-hinter so + * that the global analysis of the font shapes actually uses the modified + * mapping. + * + * @example: + * The following example code demonstrates how to access it (omitting the + * error handling). + * + * ``` + * FT_Library library; + * FT_Face face; + * FT_Prop_GlyphToScriptMap prop; + * + * + * FT_Init_FreeType( &library ); + * FT_New_Face( library, "foo.ttf", 0, &face ); + * + * prop.face = face; + * + * FT_Property_Get( library, "autofitter", + * "glyph-to-script-map", &prop ); + * + * // adjust `prop.map' as needed right here + * + * FT_Load_Glyph( face, ..., FT_LOAD_FORCE_AUTOHINT ); + * ``` + * + * @since: + * 2.4.11 + * + */ + + + /************************************************************************** + * + * @enum: + * FT_AUTOHINTER_SCRIPT_XXX + * + * @description: + * **Experimental only** + * + * A list of constants used for the @glyph-to-script-map property to + * specify the script submodule the auto-hinter should use for hinting a + * particular glyph. + * + * @values: + * FT_AUTOHINTER_SCRIPT_NONE :: + * Don't auto-hint this glyph. + * + * FT_AUTOHINTER_SCRIPT_LATIN :: + * Apply the latin auto-hinter. For the auto-hinter, 'latin' is a very + * broad term, including Cyrillic and Greek also since characters from + * those scripts share the same design constraints. + * + * By default, characters from the following Unicode ranges are + * assigned to this submodule. + * + * ``` + * U+0020 - U+007F // Basic Latin (no control characters) + * U+00A0 - U+00FF // Latin-1 Supplement (no control characters) + * U+0100 - U+017F // Latin Extended-A + * U+0180 - U+024F // Latin Extended-B + * U+0250 - U+02AF // IPA Extensions + * U+02B0 - U+02FF // Spacing Modifier Letters + * U+0300 - U+036F // Combining Diacritical Marks + * U+0370 - U+03FF // Greek and Coptic + * U+0400 - U+04FF // Cyrillic + * U+0500 - U+052F // Cyrillic Supplement + * U+1D00 - U+1D7F // Phonetic Extensions + * U+1D80 - U+1DBF // Phonetic Extensions Supplement + * U+1DC0 - U+1DFF // Combining Diacritical Marks Supplement + * U+1E00 - U+1EFF // Latin Extended Additional + * U+1F00 - U+1FFF // Greek Extended + * U+2000 - U+206F // General Punctuation + * U+2070 - U+209F // Superscripts and Subscripts + * U+20A0 - U+20CF // Currency Symbols + * U+2150 - U+218F // Number Forms + * U+2460 - U+24FF // Enclosed Alphanumerics + * U+2C60 - U+2C7F // Latin Extended-C + * U+2DE0 - U+2DFF // Cyrillic Extended-A + * U+2E00 - U+2E7F // Supplemental Punctuation + * U+A640 - U+A69F // Cyrillic Extended-B + * U+A720 - U+A7FF // Latin Extended-D + * U+FB00 - U+FB06 // Alphab. Present. Forms (Latin Ligatures) + * U+1D400 - U+1D7FF // Mathematical Alphanumeric Symbols + * U+1F100 - U+1F1FF // Enclosed Alphanumeric Supplement + * ``` + * + * FT_AUTOHINTER_SCRIPT_CJK :: + * Apply the CJK auto-hinter, covering Chinese, Japanese, Korean, old + * Vietnamese, and some other scripts. + * + * By default, characters from the following Unicode ranges are + * assigned to this submodule. + * + * ``` + * U+1100 - U+11FF // Hangul Jamo + * U+2E80 - U+2EFF // CJK Radicals Supplement + * U+2F00 - U+2FDF // Kangxi Radicals + * U+2FF0 - U+2FFF // Ideographic Description Characters + * U+3000 - U+303F // CJK Symbols and Punctuation + * U+3040 - U+309F // Hiragana + * U+30A0 - U+30FF // Katakana + * U+3100 - U+312F // Bopomofo + * U+3130 - U+318F // Hangul Compatibility Jamo + * U+3190 - U+319F // Kanbun + * U+31A0 - U+31BF // Bopomofo Extended + * U+31C0 - U+31EF // CJK Strokes + * U+31F0 - U+31FF // Katakana Phonetic Extensions + * U+3200 - U+32FF // Enclosed CJK Letters and Months + * U+3300 - U+33FF // CJK Compatibility + * U+3400 - U+4DBF // CJK Unified Ideographs Extension A + * U+4DC0 - U+4DFF // Yijing Hexagram Symbols + * U+4E00 - U+9FFF // CJK Unified Ideographs + * U+A960 - U+A97F // Hangul Jamo Extended-A + * U+AC00 - U+D7AF // Hangul Syllables + * U+D7B0 - U+D7FF // Hangul Jamo Extended-B + * U+F900 - U+FAFF // CJK Compatibility Ideographs + * U+FE10 - U+FE1F // Vertical forms + * U+FE30 - U+FE4F // CJK Compatibility Forms + * U+FF00 - U+FFEF // Halfwidth and Fullwidth Forms + * U+1B000 - U+1B0FF // Kana Supplement + * U+1D300 - U+1D35F // Tai Xuan Hing Symbols + * U+1F200 - U+1F2FF // Enclosed Ideographic Supplement + * U+20000 - U+2A6DF // CJK Unified Ideographs Extension B + * U+2A700 - U+2B73F // CJK Unified Ideographs Extension C + * U+2B740 - U+2B81F // CJK Unified Ideographs Extension D + * U+2F800 - U+2FA1F // CJK Compatibility Ideographs Supplement + * ``` + * + * FT_AUTOHINTER_SCRIPT_INDIC :: + * Apply the indic auto-hinter, covering all major scripts from the + * Indian sub-continent and some other related scripts like Thai, Lao, + * or Tibetan. + * + * By default, characters from the following Unicode ranges are + * assigned to this submodule. + * + * ``` + * U+0900 - U+0DFF // Indic Range + * U+0F00 - U+0FFF // Tibetan + * U+1900 - U+194F // Limbu + * U+1B80 - U+1BBF // Sundanese + * U+A800 - U+A82F // Syloti Nagri + * U+ABC0 - U+ABFF // Meetei Mayek + * U+11800 - U+118DF // Sharada + * ``` + * + * Note that currently Indic support is rudimentary only, missing blue + * zone support. + * + * @since: + * 2.4.11 + * + */ +#define FT_AUTOHINTER_SCRIPT_NONE 0 +#define FT_AUTOHINTER_SCRIPT_LATIN 1 +#define FT_AUTOHINTER_SCRIPT_CJK 2 +#define FT_AUTOHINTER_SCRIPT_INDIC 3 + + + /************************************************************************** + * + * @struct: + * FT_Prop_GlyphToScriptMap + * + * @description: + * **Experimental only** + * + * The data exchange structure for the @glyph-to-script-map property. + * + * @since: + * 2.4.11 + * + */ + typedef struct FT_Prop_GlyphToScriptMap_ + { + FT_Face face; + FT_UShort* map; + + } FT_Prop_GlyphToScriptMap; + + + /************************************************************************** + * + * @property: + * fallback-script + * + * @description: + * **Experimental only** + * + * If no auto-hinter script module can be assigned to a glyph, a fallback + * script gets assigned to it (see also the @glyph-to-script-map + * property). By default, this is @FT_AUTOHINTER_SCRIPT_CJK. Using the + * `fallback-script` property, this fallback value can be changed. + * + * @note: + * This property can be used with @FT_Property_Get also. + * + * It's important to use the right timing for changing this value: The + * creation of the glyph-to-script map that eventually uses the fallback + * script value gets triggered either by setting or reading a + * face-specific property like @glyph-to-script-map, or by auto-hinting + * any glyph from that face. In particular, if you have already created + * an @FT_Face structure but not loaded any glyph (using the + * auto-hinter), a change of the fallback script will affect this face. + * + * @example: + * ``` + * FT_Library library; + * FT_UInt fallback_script = FT_AUTOHINTER_SCRIPT_NONE; + * + * + * FT_Init_FreeType( &library ); + * + * FT_Property_Set( library, "autofitter", + * "fallback-script", &fallback_script ); + * ``` + * + * @since: + * 2.4.11 + * + */ + + + /************************************************************************** + * + * @property: + * default-script + * + * @description: + * **Experimental only** + * + * If FreeType gets compiled with `FT_CONFIG_OPTION_USE_HARFBUZZ` to make + * the HarfBuzz library access OpenType features for getting better glyph + * coverages, this property sets the (auto-fitter) script to be used for + * the default (OpenType) script data of a font's GSUB table. Features + * for the default script are intended for all scripts not explicitly + * handled in GSUB; an example is a 'dlig' feature, containing the + * combination of the characters 'T', 'E', and 'L' to form a 'TEL' + * ligature. + * + * By default, this is @FT_AUTOHINTER_SCRIPT_LATIN. Using the + * `default-script` property, this default value can be changed. + * + * @note: + * This property can be used with @FT_Property_Get also. + * + * It's important to use the right timing for changing this value: The + * creation of the glyph-to-script map that eventually uses the default + * script value gets triggered either by setting or reading a + * face-specific property like @glyph-to-script-map, or by auto-hinting + * any glyph from that face. In particular, if you have already created + * an @FT_Face structure but not loaded any glyph (using the + * auto-hinter), a change of the default script will affect this face. + * + * @example: + * ``` + * FT_Library library; + * FT_UInt default_script = FT_AUTOHINTER_SCRIPT_NONE; + * + * + * FT_Init_FreeType( &library ); + * + * FT_Property_Set( library, "autofitter", + * "default-script", &default_script ); + * ``` + * + * @since: + * 2.5.3 + * + */ + + + /************************************************************************** + * + * @property: + * increase-x-height + * + * @description: + * For ppem values in the range 6~<= ppem <= `increase-x-height`, round + * up the font's x~height much more often than normally. If the value is + * set to~0, which is the default, this feature is switched off. Use + * this property to improve the legibility of small font sizes if + * necessary. + * + * @note: + * This property can be used with @FT_Property_Get also. + * + * Set this value right after calling @FT_Set_Char_Size, but before + * loading any glyph (using the auto-hinter). + * + * @example: + * ``` + * FT_Library library; + * FT_Face face; + * FT_Prop_IncreaseXHeight prop; + * + * + * FT_Init_FreeType( &library ); + * FT_New_Face( library, "foo.ttf", 0, &face ); + * FT_Set_Char_Size( face, 10 * 64, 0, 72, 0 ); + * + * prop.face = face; + * prop.limit = 14; + * + * FT_Property_Set( library, "autofitter", + * "increase-x-height", &prop ); + * ``` + * + * @since: + * 2.4.11 + * + */ + + + /************************************************************************** + * + * @struct: + * FT_Prop_IncreaseXHeight + * + * @description: + * The data exchange structure for the @increase-x-height property. + * + */ + typedef struct FT_Prop_IncreaseXHeight_ + { + FT_Face face; + FT_UInt limit; + + } FT_Prop_IncreaseXHeight; + + + /************************************************************************** + * + * @property: + * warping + * + * @description: + * **Obsolete** + * + * This property was always experimental and probably never worked + * correctly. It was entirely removed from the FreeType~2 sources. This + * entry is only here for historical reference. + * + * Warping only worked in 'normal' auto-hinting mode replacing it. The + * idea of the code was to slightly scale and shift a glyph along the + * non-hinted dimension (which is usually the horizontal axis) so that as + * much of its segments were aligned (more or less) to the grid. To find + * out a glyph's optimal scaling and shifting value, various parameter + * combinations were tried and scored. + * + * @since: + * 2.6 + * + */ + + + /* */ + + +FT_END_HEADER + + +#endif /* FTDRIVER_H_ */ + + +/* END */ diff --git a/dependencies/winx64/include/freetype2/freetype/fterrdef.h b/dependencies/winx64/include/freetype2/freetype/fterrdef.h new file mode 100644 index 0000000..710ca91 --- /dev/null +++ b/dependencies/winx64/include/freetype2/freetype/fterrdef.h @@ -0,0 +1,283 @@ +/**************************************************************************** + * + * fterrdef.h + * + * FreeType error codes (specification). + * + * Copyright (C) 2002-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + + /************************************************************************** + * + * @section: + * error_code_values + * + * @title: + * Error Code Values + * + * @abstract: + * All possible error codes returned by FreeType functions. + * + * @description: + * The list below is taken verbatim from the file `fterrdef.h` (loaded + * automatically by including `FT_FREETYPE_H`). The first argument of the + * `FT_ERROR_DEF_` macro is the error label; by default, the prefix + * `FT_Err_` gets added so that you get error names like + * `FT_Err_Cannot_Open_Resource`. The second argument is the error code, + * and the last argument an error string, which is not used by FreeType. + * + * Within your application you should **only** use error names and + * **never** its numeric values! The latter might (and actually do) + * change in forthcoming FreeType versions. + * + * Macro `FT_NOERRORDEF_` defines `FT_Err_Ok`, which is always zero. See + * the 'Error Enumerations' subsection how to automatically generate a + * list of error strings. + * + */ + + + /************************************************************************** + * + * @enum: + * FT_Err_XXX + * + */ + + /* generic errors */ + + FT_NOERRORDEF_( Ok, 0x00, + "no error" ) + + FT_ERRORDEF_( Cannot_Open_Resource, 0x01, + "cannot open resource" ) + FT_ERRORDEF_( Unknown_File_Format, 0x02, + "unknown file format" ) + FT_ERRORDEF_( Invalid_File_Format, 0x03, + "broken file" ) + FT_ERRORDEF_( Invalid_Version, 0x04, + "invalid FreeType version" ) + FT_ERRORDEF_( Lower_Module_Version, 0x05, + "module version is too low" ) + FT_ERRORDEF_( Invalid_Argument, 0x06, + "invalid argument" ) + FT_ERRORDEF_( Unimplemented_Feature, 0x07, + "unimplemented feature" ) + FT_ERRORDEF_( Invalid_Table, 0x08, + "broken table" ) + FT_ERRORDEF_( Invalid_Offset, 0x09, + "broken offset within table" ) + FT_ERRORDEF_( Array_Too_Large, 0x0A, + "array allocation size too large" ) + FT_ERRORDEF_( Missing_Module, 0x0B, + "missing module" ) + FT_ERRORDEF_( Missing_Property, 0x0C, + "missing property" ) + + /* glyph/character errors */ + + FT_ERRORDEF_( Invalid_Glyph_Index, 0x10, + "invalid glyph index" ) + FT_ERRORDEF_( Invalid_Character_Code, 0x11, + "invalid character code" ) + FT_ERRORDEF_( Invalid_Glyph_Format, 0x12, + "unsupported glyph image format" ) + FT_ERRORDEF_( Cannot_Render_Glyph, 0x13, + "cannot render this glyph format" ) + FT_ERRORDEF_( Invalid_Outline, 0x14, + "invalid outline" ) + FT_ERRORDEF_( Invalid_Composite, 0x15, + "invalid composite glyph" ) + FT_ERRORDEF_( Too_Many_Hints, 0x16, + "too many hints" ) + FT_ERRORDEF_( Invalid_Pixel_Size, 0x17, + "invalid pixel size" ) + FT_ERRORDEF_( Invalid_SVG_Document, 0x18, + "invalid SVG document" ) + + /* handle errors */ + + FT_ERRORDEF_( Invalid_Handle, 0x20, + "invalid object handle" ) + FT_ERRORDEF_( Invalid_Library_Handle, 0x21, + "invalid library handle" ) + FT_ERRORDEF_( Invalid_Driver_Handle, 0x22, + "invalid module handle" ) + FT_ERRORDEF_( Invalid_Face_Handle, 0x23, + "invalid face handle" ) + FT_ERRORDEF_( Invalid_Size_Handle, 0x24, + "invalid size handle" ) + FT_ERRORDEF_( Invalid_Slot_Handle, 0x25, + "invalid glyph slot handle" ) + FT_ERRORDEF_( Invalid_CharMap_Handle, 0x26, + "invalid charmap handle" ) + FT_ERRORDEF_( Invalid_Cache_Handle, 0x27, + "invalid cache manager handle" ) + FT_ERRORDEF_( Invalid_Stream_Handle, 0x28, + "invalid stream handle" ) + + /* driver errors */ + + FT_ERRORDEF_( Too_Many_Drivers, 0x30, + "too many modules" ) + FT_ERRORDEF_( Too_Many_Extensions, 0x31, + "too many extensions" ) + + /* memory errors */ + + FT_ERRORDEF_( Out_Of_Memory, 0x40, + "out of memory" ) + FT_ERRORDEF_( Unlisted_Object, 0x41, + "unlisted object" ) + + /* stream errors */ + + FT_ERRORDEF_( Cannot_Open_Stream, 0x51, + "cannot open stream" ) + FT_ERRORDEF_( Invalid_Stream_Seek, 0x52, + "invalid stream seek" ) + FT_ERRORDEF_( Invalid_Stream_Skip, 0x53, + "invalid stream skip" ) + FT_ERRORDEF_( Invalid_Stream_Read, 0x54, + "invalid stream read" ) + FT_ERRORDEF_( Invalid_Stream_Operation, 0x55, + "invalid stream operation" ) + FT_ERRORDEF_( Invalid_Frame_Operation, 0x56, + "invalid frame operation" ) + FT_ERRORDEF_( Nested_Frame_Access, 0x57, + "nested frame access" ) + FT_ERRORDEF_( Invalid_Frame_Read, 0x58, + "invalid frame read" ) + + /* raster errors */ + + FT_ERRORDEF_( Raster_Uninitialized, 0x60, + "raster uninitialized" ) + FT_ERRORDEF_( Raster_Corrupted, 0x61, + "raster corrupted" ) + FT_ERRORDEF_( Raster_Overflow, 0x62, + "raster overflow" ) + FT_ERRORDEF_( Raster_Negative_Height, 0x63, + "negative height while rastering" ) + + /* cache errors */ + + FT_ERRORDEF_( Too_Many_Caches, 0x70, + "too many registered caches" ) + + /* TrueType and SFNT errors */ + + FT_ERRORDEF_( Invalid_Opcode, 0x80, + "invalid opcode" ) + FT_ERRORDEF_( Too_Few_Arguments, 0x81, + "too few arguments" ) + FT_ERRORDEF_( Stack_Overflow, 0x82, + "stack overflow" ) + FT_ERRORDEF_( Code_Overflow, 0x83, + "code overflow" ) + FT_ERRORDEF_( Bad_Argument, 0x84, + "bad argument" ) + FT_ERRORDEF_( Divide_By_Zero, 0x85, + "division by zero" ) + FT_ERRORDEF_( Invalid_Reference, 0x86, + "invalid reference" ) + FT_ERRORDEF_( Debug_OpCode, 0x87, + "found debug opcode" ) + FT_ERRORDEF_( ENDF_In_Exec_Stream, 0x88, + "found ENDF opcode in execution stream" ) + FT_ERRORDEF_( Nested_DEFS, 0x89, + "nested DEFS" ) + FT_ERRORDEF_( Invalid_CodeRange, 0x8A, + "invalid code range" ) + FT_ERRORDEF_( Execution_Too_Long, 0x8B, + "execution context too long" ) + FT_ERRORDEF_( Too_Many_Function_Defs, 0x8C, + "too many function definitions" ) + FT_ERRORDEF_( Too_Many_Instruction_Defs, 0x8D, + "too many instruction definitions" ) + FT_ERRORDEF_( Table_Missing, 0x8E, + "SFNT font table missing" ) + FT_ERRORDEF_( Horiz_Header_Missing, 0x8F, + "horizontal header (hhea) table missing" ) + FT_ERRORDEF_( Locations_Missing, 0x90, + "locations (loca) table missing" ) + FT_ERRORDEF_( Name_Table_Missing, 0x91, + "name table missing" ) + FT_ERRORDEF_( CMap_Table_Missing, 0x92, + "character map (cmap) table missing" ) + FT_ERRORDEF_( Hmtx_Table_Missing, 0x93, + "horizontal metrics (hmtx) table missing" ) + FT_ERRORDEF_( Post_Table_Missing, 0x94, + "PostScript (post) table missing" ) + FT_ERRORDEF_( Invalid_Horiz_Metrics, 0x95, + "invalid horizontal metrics" ) + FT_ERRORDEF_( Invalid_CharMap_Format, 0x96, + "invalid character map (cmap) format" ) + FT_ERRORDEF_( Invalid_PPem, 0x97, + "invalid ppem value" ) + FT_ERRORDEF_( Invalid_Vert_Metrics, 0x98, + "invalid vertical metrics" ) + FT_ERRORDEF_( Could_Not_Find_Context, 0x99, + "could not find context" ) + FT_ERRORDEF_( Invalid_Post_Table_Format, 0x9A, + "invalid PostScript (post) table format" ) + FT_ERRORDEF_( Invalid_Post_Table, 0x9B, + "invalid PostScript (post) table" ) + FT_ERRORDEF_( DEF_In_Glyf_Bytecode, 0x9C, + "found FDEF or IDEF opcode in glyf bytecode" ) + FT_ERRORDEF_( Missing_Bitmap, 0x9D, + "missing bitmap in strike" ) + FT_ERRORDEF_( Missing_SVG_Hooks, 0x9E, + "SVG hooks have not been set" ) + + /* CFF, CID, and Type 1 errors */ + + FT_ERRORDEF_( Syntax_Error, 0xA0, + "opcode syntax error" ) + FT_ERRORDEF_( Stack_Underflow, 0xA1, + "argument stack underflow" ) + FT_ERRORDEF_( Ignore, 0xA2, + "ignore" ) + FT_ERRORDEF_( No_Unicode_Glyph_Name, 0xA3, + "no Unicode glyph name found" ) + FT_ERRORDEF_( Glyph_Too_Big, 0xA4, + "glyph too big for hinting" ) + + /* BDF errors */ + + FT_ERRORDEF_( Missing_Startfont_Field, 0xB0, + "`STARTFONT' field missing" ) + FT_ERRORDEF_( Missing_Font_Field, 0xB1, + "`FONT' field missing" ) + FT_ERRORDEF_( Missing_Size_Field, 0xB2, + "`SIZE' field missing" ) + FT_ERRORDEF_( Missing_Fontboundingbox_Field, 0xB3, + "`FONTBOUNDINGBOX' field missing" ) + FT_ERRORDEF_( Missing_Chars_Field, 0xB4, + "`CHARS' field missing" ) + FT_ERRORDEF_( Missing_Startchar_Field, 0xB5, + "`STARTCHAR' field missing" ) + FT_ERRORDEF_( Missing_Encoding_Field, 0xB6, + "`ENCODING' field missing" ) + FT_ERRORDEF_( Missing_Bbx_Field, 0xB7, + "`BBX' field missing" ) + FT_ERRORDEF_( Bbx_Too_Big, 0xB8, + "`BBX' too big" ) + FT_ERRORDEF_( Corrupted_Font_Header, 0xB9, + "Font header corrupted or missing fields" ) + FT_ERRORDEF_( Corrupted_Font_Glyphs, 0xBA, + "Font glyphs corrupted or missing fields" ) + + /* */ + + +/* END */ diff --git a/dependencies/winx64/include/freetype2/freetype/fterrors.h b/dependencies/winx64/include/freetype2/freetype/fterrors.h new file mode 100644 index 0000000..27c0ece --- /dev/null +++ b/dependencies/winx64/include/freetype2/freetype/fterrors.h @@ -0,0 +1,296 @@ +/**************************************************************************** + * + * fterrors.h + * + * FreeType error code handling (specification). + * + * Copyright (C) 1996-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + + /************************************************************************** + * + * @section: + * error_enumerations + * + * @title: + * Error Enumerations + * + * @abstract: + * How to handle errors and error strings. + * + * @description: + * The header file `fterrors.h` (which is automatically included by + * `freetype.h`) defines the handling of FreeType's enumeration + * constants. It can also be used to generate error message strings + * with a small macro trick explained below. + * + * **Error Formats** + * + * The configuration macro `FT_CONFIG_OPTION_USE_MODULE_ERRORS` can be + * defined in `ftoption.h` in order to make the higher byte indicate the + * module where the error has happened (this is not compatible with + * standard builds of FreeType~2, however). See the file `ftmoderr.h` + * for more details. + * + * **Error Message Strings** + * + * Error definitions are set up with special macros that allow client + * applications to build a table of error message strings. The strings + * are not included in a normal build of FreeType~2 to save space (most + * client applications do not use them). + * + * To do so, you have to define the following macros before including + * this file. + * + * ``` + * FT_ERROR_START_LIST + * ``` + * + * This macro is called before anything else to define the start of the + * error list. It is followed by several `FT_ERROR_DEF` calls. + * + * ``` + * FT_ERROR_DEF( e, v, s ) + * ``` + * + * This macro is called to define one single error. 'e' is the error + * code identifier (e.g., `Invalid_Argument`), 'v' is the error's + * numerical value, and 's' is the corresponding error string. + * + * ``` + * FT_ERROR_END_LIST + * ``` + * + * This macro ends the list. + * + * Additionally, you have to undefine `FTERRORS_H_` before #including + * this file. + * + * Here is a simple example. + * + * ``` + * #undef FTERRORS_H_ + * #define FT_ERRORDEF( e, v, s ) { e, s }, + * #define FT_ERROR_START_LIST { + * #define FT_ERROR_END_LIST { 0, NULL } }; + * + * const struct + * { + * int err_code; + * const char* err_msg; + * } ft_errors[] = + * + * #include + * ``` + * + * An alternative to using an array is a switch statement. + * + * ``` + * #undef FTERRORS_H_ + * #define FT_ERROR_START_LIST switch ( error_code ) { + * #define FT_ERRORDEF( e, v, s ) case v: return s; + * #define FT_ERROR_END_LIST } + * ``` + * + * If you use `FT_CONFIG_OPTION_USE_MODULE_ERRORS`, `error_code` should + * be replaced with `FT_ERROR_BASE(error_code)` in the last example. + */ + + /* */ + + /* In previous FreeType versions we used `__FTERRORS_H__`. However, */ + /* using two successive underscores in a non-system symbol name */ + /* violates the C (and C++) standard, so it was changed to the */ + /* current form. In spite of this, we have to make */ + /* */ + /* ``` */ + /* #undefine __FTERRORS_H__ */ + /* ``` */ + /* */ + /* work for backward compatibility. */ + /* */ +#if !( defined( FTERRORS_H_ ) && defined ( __FTERRORS_H__ ) ) +#define FTERRORS_H_ +#define __FTERRORS_H__ + + + /* include module base error codes */ +#include + + + /*******************************************************************/ + /*******************************************************************/ + /***** *****/ + /***** SETUP MACROS *****/ + /***** *****/ + /*******************************************************************/ + /*******************************************************************/ + + +#undef FT_NEED_EXTERN_C + + + /* FT_ERR_PREFIX is used as a prefix for error identifiers. */ + /* By default, we use `FT_Err_`. */ + /* */ +#ifndef FT_ERR_PREFIX +#define FT_ERR_PREFIX FT_Err_ +#endif + + + /* FT_ERR_BASE is used as the base for module-specific errors. */ + /* */ +#ifdef FT_CONFIG_OPTION_USE_MODULE_ERRORS + +#ifndef FT_ERR_BASE +#define FT_ERR_BASE FT_Mod_Err_Base +#endif + +#else + +#undef FT_ERR_BASE +#define FT_ERR_BASE 0 + +#endif /* FT_CONFIG_OPTION_USE_MODULE_ERRORS */ + + + /* If FT_ERRORDEF is not defined, we need to define a simple */ + /* enumeration type. */ + /* */ +#ifndef FT_ERRORDEF + +#define FT_INCLUDE_ERR_PROTOS + +#define FT_ERRORDEF( e, v, s ) e = v, +#define FT_ERROR_START_LIST enum { +#define FT_ERROR_END_LIST FT_ERR_CAT( FT_ERR_PREFIX, Max ) }; + +#ifdef __cplusplus +#define FT_NEED_EXTERN_C + extern "C" { +#endif + +#endif /* !FT_ERRORDEF */ + + + /* this macro is used to define an error */ +#define FT_ERRORDEF_( e, v, s ) \ + FT_ERRORDEF( FT_ERR_CAT( FT_ERR_PREFIX, e ), v + FT_ERR_BASE, s ) + + /* this is only used for _Err_Ok, which must be 0! */ +#define FT_NOERRORDEF_( e, v, s ) \ + FT_ERRORDEF( FT_ERR_CAT( FT_ERR_PREFIX, e ), v, s ) + + +#ifdef FT_ERROR_START_LIST + FT_ERROR_START_LIST +#endif + + + /* now include the error codes */ +#include + + +#ifdef FT_ERROR_END_LIST + FT_ERROR_END_LIST +#endif + + + /*******************************************************************/ + /*******************************************************************/ + /***** *****/ + /***** SIMPLE CLEANUP *****/ + /***** *****/ + /*******************************************************************/ + /*******************************************************************/ + +#ifdef FT_NEED_EXTERN_C + } +#endif + +#undef FT_ERROR_START_LIST +#undef FT_ERROR_END_LIST + +#undef FT_ERRORDEF +#undef FT_ERRORDEF_ +#undef FT_NOERRORDEF_ + +#undef FT_NEED_EXTERN_C +#undef FT_ERR_BASE + + /* FT_ERR_PREFIX is needed internally */ +#ifndef FT2_BUILD_LIBRARY +#undef FT_ERR_PREFIX +#endif + + /* FT_INCLUDE_ERR_PROTOS: Control whether function prototypes should be */ + /* included with */ + /* */ + /* #include */ + /* */ + /* This is only true where `FT_ERRORDEF` is */ + /* undefined. */ + /* */ + /* FT_ERR_PROTOS_DEFINED: Actual multiple-inclusion protection of */ + /* `fterrors.h`. */ +#ifdef FT_INCLUDE_ERR_PROTOS +#undef FT_INCLUDE_ERR_PROTOS + +#ifndef FT_ERR_PROTOS_DEFINED +#define FT_ERR_PROTOS_DEFINED + + +FT_BEGIN_HEADER + + /************************************************************************** + * + * @function: + * FT_Error_String + * + * @description: + * Retrieve the description of a valid FreeType error code. + * + * @input: + * error_code :: + * A valid FreeType error code. + * + * @return: + * A C~string or `NULL`, if any error occurred. + * + * @note: + * FreeType has to be compiled with `FT_CONFIG_OPTION_ERROR_STRINGS` or + * `FT_DEBUG_LEVEL_ERROR` to get meaningful descriptions. + * 'error_string' will be `NULL` otherwise. + * + * Module identification will be ignored: + * + * ```c + * strcmp( FT_Error_String( FT_Err_Unknown_File_Format ), + * FT_Error_String( BDF_Err_Unknown_File_Format ) ) == 0; + * ``` + */ + FT_EXPORT( const char* ) + FT_Error_String( FT_Error error_code ); + + /* */ + +FT_END_HEADER + + +#endif /* FT_ERR_PROTOS_DEFINED */ + +#endif /* FT_INCLUDE_ERR_PROTOS */ + +#endif /* !(FTERRORS_H_ && __FTERRORS_H__) */ + + +/* END */ diff --git a/dependencies/winx64/include/freetype2/freetype/ftfntfmt.h b/dependencies/winx64/include/freetype2/freetype/ftfntfmt.h new file mode 100644 index 0000000..7c8b087 --- /dev/null +++ b/dependencies/winx64/include/freetype2/freetype/ftfntfmt.h @@ -0,0 +1,93 @@ +/**************************************************************************** + * + * ftfntfmt.h + * + * Support functions for font formats. + * + * Copyright (C) 2002-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + +#ifndef FTFNTFMT_H_ +#define FTFNTFMT_H_ + +#include + +#ifdef FREETYPE_H +#error "freetype.h of FreeType 1 has been loaded!" +#error "Please fix the directory search order for header files" +#error "so that freetype.h of FreeType 2 is found first." +#endif + + +FT_BEGIN_HEADER + + + /************************************************************************** + * + * @section: + * font_formats + * + * @title: + * Font Formats + * + * @abstract: + * Getting the font format. + * + * @description: + * The single function in this section can be used to get the font format. + * Note that this information is not needed normally; however, there are + * special cases (like in PDF devices) where it is important to + * differentiate, in spite of FreeType's uniform API. + * + */ + + + /************************************************************************** + * + * @function: + * FT_Get_Font_Format + * + * @description: + * Return a string describing the format of a given face. Possible values + * are 'TrueType', 'Type~1', 'BDF', 'PCF', 'Type~42', 'CID~Type~1', 'CFF', + * 'PFR', and 'Windows~FNT'. + * + * The return value is suitable to be used as an X11 FONT_PROPERTY. + * + * @input: + * face :: + * Input face handle. + * + * @return: + * Font format string. `NULL` in case of error. + * + * @note: + * A deprecated name for the same function is `FT_Get_X11_Font_Format`. + */ + FT_EXPORT( const char* ) + FT_Get_Font_Format( FT_Face face ); + + + /* deprecated */ + FT_EXPORT( const char* ) + FT_Get_X11_Font_Format( FT_Face face ); + + + /* */ + + +FT_END_HEADER + +#endif /* FTFNTFMT_H_ */ + + +/* END */ diff --git a/dependencies/winx64/include/freetype2/freetype/ftgasp.h b/dependencies/winx64/include/freetype2/freetype/ftgasp.h new file mode 100644 index 0000000..30e5a9b --- /dev/null +++ b/dependencies/winx64/include/freetype2/freetype/ftgasp.h @@ -0,0 +1,143 @@ +/**************************************************************************** + * + * ftgasp.h + * + * Access of TrueType's 'gasp' table (specification). + * + * Copyright (C) 2007-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + +#ifndef FTGASP_H_ +#define FTGASP_H_ + +#include + +#ifdef FREETYPE_H +#error "freetype.h of FreeType 1 has been loaded!" +#error "Please fix the directory search order for header files" +#error "so that freetype.h of FreeType 2 is found first." +#endif + + +FT_BEGIN_HEADER + + + /************************************************************************** + * + * @section: + * gasp_table + * + * @title: + * Gasp Table + * + * @abstract: + * Retrieving TrueType 'gasp' table entries. + * + * @description: + * The function @FT_Get_Gasp can be used to query a TrueType or OpenType + * font for specific entries in its 'gasp' table, if any. This is mainly + * useful when implementing native TrueType hinting with the bytecode + * interpreter to duplicate the Windows text rendering results. + */ + + /************************************************************************** + * + * @enum: + * FT_GASP_XXX + * + * @description: + * A list of values and/or bit-flags returned by the @FT_Get_Gasp + * function. + * + * @values: + * FT_GASP_NO_TABLE :: + * This special value means that there is no GASP table in this face. + * It is up to the client to decide what to do. + * + * FT_GASP_DO_GRIDFIT :: + * Grid-fitting and hinting should be performed at the specified ppem. + * This **really** means TrueType bytecode interpretation. If this bit + * is not set, no hinting gets applied. + * + * FT_GASP_DO_GRAY :: + * Anti-aliased rendering should be performed at the specified ppem. + * If not set, do monochrome rendering. + * + * FT_GASP_SYMMETRIC_SMOOTHING :: + * If set, smoothing along multiple axes must be used with ClearType. + * + * FT_GASP_SYMMETRIC_GRIDFIT :: + * Grid-fitting must be used with ClearType's symmetric smoothing. + * + * @note: + * The bit-flags `FT_GASP_DO_GRIDFIT` and `FT_GASP_DO_GRAY` are to be + * used for standard font rasterization only. Independently of that, + * `FT_GASP_SYMMETRIC_SMOOTHING` and `FT_GASP_SYMMETRIC_GRIDFIT` are to + * be used if ClearType is enabled (and `FT_GASP_DO_GRIDFIT` and + * `FT_GASP_DO_GRAY` are consequently ignored). + * + * 'ClearType' is Microsoft's implementation of LCD rendering, partly + * protected by patents. + * + * @since: + * 2.3.0 + */ +#define FT_GASP_NO_TABLE -1 +#define FT_GASP_DO_GRIDFIT 0x01 +#define FT_GASP_DO_GRAY 0x02 +#define FT_GASP_SYMMETRIC_GRIDFIT 0x04 +#define FT_GASP_SYMMETRIC_SMOOTHING 0x08 + + + /************************************************************************** + * + * @function: + * FT_Get_Gasp + * + * @description: + * For a TrueType or OpenType font file, return the rasterizer behaviour + * flags from the font's 'gasp' table corresponding to a given character + * pixel size. + * + * @input: + * face :: + * The source face handle. + * + * ppem :: + * The vertical character pixel size. + * + * @return: + * Bit flags (see @FT_GASP_XXX), or @FT_GASP_NO_TABLE if there is no + * 'gasp' table in the face. + * + * @note: + * If you want to use the MM functionality of OpenType variation fonts + * (i.e., using @FT_Set_Var_Design_Coordinates and friends), call this + * function **after** setting an instance since the return values can + * change. + * + * @since: + * 2.3.0 + */ + FT_EXPORT( FT_Int ) + FT_Get_Gasp( FT_Face face, + FT_UInt ppem ); + + /* */ + + +FT_END_HEADER + +#endif /* FTGASP_H_ */ + + +/* END */ diff --git a/dependencies/winx64/include/freetype2/freetype/ftglyph.h b/dependencies/winx64/include/freetype2/freetype/ftglyph.h new file mode 100644 index 0000000..dc1eb88 --- /dev/null +++ b/dependencies/winx64/include/freetype2/freetype/ftglyph.h @@ -0,0 +1,750 @@ +/**************************************************************************** + * + * ftglyph.h + * + * FreeType convenience functions to handle glyphs (specification). + * + * Copyright (C) 1996-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + + /************************************************************************** + * + * This file contains the definition of several convenience functions that + * can be used by client applications to easily retrieve glyph bitmaps and + * outlines from a given face. + * + * These functions should be optional if you are writing a font server or + * text layout engine on top of FreeType. However, they are pretty handy + * for many other simple uses of the library. + * + */ + + +#ifndef FTGLYPH_H_ +#define FTGLYPH_H_ + + +#include + +#ifdef FREETYPE_H +#error "freetype.h of FreeType 1 has been loaded!" +#error "Please fix the directory search order for header files" +#error "so that freetype.h of FreeType 2 is found first." +#endif + + +FT_BEGIN_HEADER + + + /************************************************************************** + * + * @section: + * glyph_management + * + * @title: + * Glyph Management + * + * @abstract: + * Generic interface to manage individual glyph data. + * + * @description: + * This section contains definitions used to manage glyph data through + * generic @FT_Glyph objects. Each of them can contain a bitmap, + * a vector outline, or even images in other formats. These objects are + * detached from @FT_Face, contrary to @FT_GlyphSlot. + * + */ + + + /* forward declaration to a private type */ + typedef struct FT_Glyph_Class_ FT_Glyph_Class; + + + /************************************************************************** + * + * @type: + * FT_Glyph + * + * @description: + * Handle to an object used to model generic glyph images. It is a + * pointer to the @FT_GlyphRec structure and can contain a glyph bitmap + * or pointer. + * + * @note: + * Glyph objects are not owned by the library. You must thus release + * them manually (through @FT_Done_Glyph) _before_ calling + * @FT_Done_FreeType. + */ + typedef struct FT_GlyphRec_* FT_Glyph; + + + /************************************************************************** + * + * @struct: + * FT_GlyphRec + * + * @description: + * The root glyph structure contains a given glyph image plus its advance + * width in 16.16 fixed-point format. + * + * @fields: + * library :: + * A handle to the FreeType library object. + * + * clazz :: + * A pointer to the glyph's class. Private. + * + * format :: + * The format of the glyph's image. + * + * advance :: + * A 16.16 vector that gives the glyph's advance width. + */ + typedef struct FT_GlyphRec_ + { + FT_Library library; + const FT_Glyph_Class* clazz; + FT_Glyph_Format format; + FT_Vector advance; + + } FT_GlyphRec; + + + /************************************************************************** + * + * @type: + * FT_BitmapGlyph + * + * @description: + * A handle to an object used to model a bitmap glyph image. This is a + * 'sub-class' of @FT_Glyph, and a pointer to @FT_BitmapGlyphRec. + */ + typedef struct FT_BitmapGlyphRec_* FT_BitmapGlyph; + + + /************************************************************************** + * + * @struct: + * FT_BitmapGlyphRec + * + * @description: + * A structure used for bitmap glyph images. This really is a + * 'sub-class' of @FT_GlyphRec. + * + * @fields: + * root :: + * The root fields of @FT_Glyph. + * + * left :: + * The left-side bearing, i.e., the horizontal distance from the + * current pen position to the left border of the glyph bitmap. + * + * top :: + * The top-side bearing, i.e., the vertical distance from the current + * pen position to the top border of the glyph bitmap. This distance + * is positive for upwards~y! + * + * bitmap :: + * A descriptor for the bitmap. + * + * @note: + * You can typecast an @FT_Glyph to @FT_BitmapGlyph if you have + * `glyph->format == FT_GLYPH_FORMAT_BITMAP`. This lets you access the + * bitmap's contents easily. + * + * The corresponding pixel buffer is always owned by @FT_BitmapGlyph and + * is thus created and destroyed with it. + */ + typedef struct FT_BitmapGlyphRec_ + { + FT_GlyphRec root; + FT_Int left; + FT_Int top; + FT_Bitmap bitmap; + + } FT_BitmapGlyphRec; + + + /************************************************************************** + * + * @type: + * FT_OutlineGlyph + * + * @description: + * A handle to an object used to model an outline glyph image. This is a + * 'sub-class' of @FT_Glyph, and a pointer to @FT_OutlineGlyphRec. + */ + typedef struct FT_OutlineGlyphRec_* FT_OutlineGlyph; + + + /************************************************************************** + * + * @struct: + * FT_OutlineGlyphRec + * + * @description: + * A structure used for outline (vectorial) glyph images. This really is + * a 'sub-class' of @FT_GlyphRec. + * + * @fields: + * root :: + * The root @FT_Glyph fields. + * + * outline :: + * A descriptor for the outline. + * + * @note: + * You can typecast an @FT_Glyph to @FT_OutlineGlyph if you have + * `glyph->format == FT_GLYPH_FORMAT_OUTLINE`. This lets you access the + * outline's content easily. + * + * As the outline is extracted from a glyph slot, its coordinates are + * expressed normally in 26.6 pixels, unless the flag @FT_LOAD_NO_SCALE + * was used in @FT_Load_Glyph or @FT_Load_Char. + * + * The outline's tables are always owned by the object and are destroyed + * with it. + */ + typedef struct FT_OutlineGlyphRec_ + { + FT_GlyphRec root; + FT_Outline outline; + + } FT_OutlineGlyphRec; + + + /************************************************************************** + * + * @type: + * FT_SvgGlyph + * + * @description: + * A handle to an object used to model an SVG glyph. This is a + * 'sub-class' of @FT_Glyph, and a pointer to @FT_SvgGlyphRec. + * + * @since: + * 2.12 + */ + typedef struct FT_SvgGlyphRec_* FT_SvgGlyph; + + + /************************************************************************** + * + * @struct: + * FT_SvgGlyphRec + * + * @description: + * A structure used for OT-SVG glyphs. This is a 'sub-class' of + * @FT_GlyphRec. + * + * @fields: + * root :: + * The root @FT_GlyphRec fields. + * + * svg_document :: + * A pointer to the SVG document. + * + * svg_document_length :: + * The length of `svg_document`. + * + * glyph_index :: + * The index of the glyph to be rendered. + * + * metrics :: + * A metrics object storing the size information. + * + * units_per_EM :: + * The size of the EM square. + * + * start_glyph_id :: + * The first glyph ID in the glyph range covered by this document. + * + * end_glyph_id :: + * The last glyph ID in the glyph range covered by this document. + * + * transform :: + * A 2x2 transformation matrix to apply to the glyph while rendering + * it. + * + * delta :: + * Translation to apply to the glyph while rendering. + * + * @note: + * The Glyph Management API requires @FT_Glyph or its 'sub-class' to have + * all the information needed to completely define the glyph's rendering. + * Outline-based glyphs can directly apply transformations to the outline + * but this is not possible for an SVG document that hasn't been parsed. + * Therefore, the transformation is stored along with the document. In + * the absence of a 'ViewBox' or 'Width'/'Height' attribute, the size of + * the ViewPort should be assumed to be 'units_per_EM'. + */ + typedef struct FT_SvgGlyphRec_ + { + FT_GlyphRec root; + + FT_Byte* svg_document; + FT_ULong svg_document_length; + + FT_UInt glyph_index; + + FT_Size_Metrics metrics; + FT_UShort units_per_EM; + + FT_UShort start_glyph_id; + FT_UShort end_glyph_id; + + FT_Matrix transform; + FT_Vector delta; + + } FT_SvgGlyphRec; + + + /************************************************************************** + * + * @function: + * FT_New_Glyph + * + * @description: + * A function used to create a new empty glyph image. Note that the + * created @FT_Glyph object must be released with @FT_Done_Glyph. + * + * @input: + * library :: + * A handle to the FreeType library object. + * + * format :: + * The format of the glyph's image. + * + * @output: + * aglyph :: + * A handle to the glyph object. + * + * @return: + * FreeType error code. 0~means success. + * + * @since: + * 2.10 + */ + FT_EXPORT( FT_Error ) + FT_New_Glyph( FT_Library library, + FT_Glyph_Format format, + FT_Glyph *aglyph ); + + + /************************************************************************** + * + * @function: + * FT_Get_Glyph + * + * @description: + * A function used to extract a glyph image from a slot. Note that the + * created @FT_Glyph object must be released with @FT_Done_Glyph. + * + * @input: + * slot :: + * A handle to the source glyph slot. + * + * @output: + * aglyph :: + * A handle to the glyph object. `NULL` in case of error. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * Because `*aglyph->advance.x` and `*aglyph->advance.y` are 16.16 + * fixed-point numbers, `slot->advance.x` and `slot->advance.y` (which + * are in 26.6 fixed-point format) must be in the range ]-32768;32768[. + */ + FT_EXPORT( FT_Error ) + FT_Get_Glyph( FT_GlyphSlot slot, + FT_Glyph *aglyph ); + + + /************************************************************************** + * + * @function: + * FT_Glyph_Copy + * + * @description: + * A function used to copy a glyph image. Note that the created + * @FT_Glyph object must be released with @FT_Done_Glyph. + * + * @input: + * source :: + * A handle to the source glyph object. + * + * @output: + * target :: + * A handle to the target glyph object. `NULL` in case of error. + * + * @return: + * FreeType error code. 0~means success. + */ + FT_EXPORT( FT_Error ) + FT_Glyph_Copy( FT_Glyph source, + FT_Glyph *target ); + + + /************************************************************************** + * + * @function: + * FT_Glyph_Transform + * + * @description: + * Transform a glyph image if its format is scalable. + * + * @inout: + * glyph :: + * A handle to the target glyph object. + * + * @input: + * matrix :: + * A pointer to a 2x2 matrix to apply. + * + * delta :: + * A pointer to a 2d vector to apply. Coordinates are expressed in + * 1/64 of a pixel. + * + * @return: + * FreeType error code (if not 0, the glyph format is not scalable). + * + * @note: + * The 2x2 transformation matrix is also applied to the glyph's advance + * vector. + */ + FT_EXPORT( FT_Error ) + FT_Glyph_Transform( FT_Glyph glyph, + const FT_Matrix* matrix, + const FT_Vector* delta ); + + + /************************************************************************** + * + * @enum: + * FT_Glyph_BBox_Mode + * + * @description: + * The mode how the values of @FT_Glyph_Get_CBox are returned. + * + * @values: + * FT_GLYPH_BBOX_UNSCALED :: + * Return unscaled font units. + * + * FT_GLYPH_BBOX_SUBPIXELS :: + * Return unfitted 26.6 coordinates. + * + * FT_GLYPH_BBOX_GRIDFIT :: + * Return grid-fitted 26.6 coordinates. + * + * FT_GLYPH_BBOX_TRUNCATE :: + * Return coordinates in integer pixels. + * + * FT_GLYPH_BBOX_PIXELS :: + * Return grid-fitted pixel coordinates. + */ + typedef enum FT_Glyph_BBox_Mode_ + { + FT_GLYPH_BBOX_UNSCALED = 0, + FT_GLYPH_BBOX_SUBPIXELS = 0, + FT_GLYPH_BBOX_GRIDFIT = 1, + FT_GLYPH_BBOX_TRUNCATE = 2, + FT_GLYPH_BBOX_PIXELS = 3 + + } FT_Glyph_BBox_Mode; + + + /* these constants are deprecated; use the corresponding */ + /* `FT_Glyph_BBox_Mode` values instead */ +#define ft_glyph_bbox_unscaled FT_GLYPH_BBOX_UNSCALED +#define ft_glyph_bbox_subpixels FT_GLYPH_BBOX_SUBPIXELS +#define ft_glyph_bbox_gridfit FT_GLYPH_BBOX_GRIDFIT +#define ft_glyph_bbox_truncate FT_GLYPH_BBOX_TRUNCATE +#define ft_glyph_bbox_pixels FT_GLYPH_BBOX_PIXELS + + + /************************************************************************** + * + * @function: + * FT_Glyph_Get_CBox + * + * @description: + * Return a glyph's 'control box'. The control box encloses all the + * outline's points, including Bezier control points. Though it + * coincides with the exact bounding box for most glyphs, it can be + * slightly larger in some situations (like when rotating an outline that + * contains Bezier outside arcs). + * + * Computing the control box is very fast, while getting the bounding box + * can take much more time as it needs to walk over all segments and arcs + * in the outline. To get the latter, you can use the 'ftbbox' + * component, which is dedicated to this single task. + * + * @input: + * glyph :: + * A handle to the source glyph object. + * + * mode :: + * The mode that indicates how to interpret the returned bounding box + * values. + * + * @output: + * acbox :: + * The glyph coordinate bounding box. Coordinates are expressed in + * 1/64 of pixels if it is grid-fitted. + * + * @note: + * Coordinates are relative to the glyph origin, using the y~upwards + * convention. + * + * If the glyph has been loaded with @FT_LOAD_NO_SCALE, `bbox_mode` must + * be set to @FT_GLYPH_BBOX_UNSCALED to get unscaled font units in 26.6 + * pixel format. The value @FT_GLYPH_BBOX_SUBPIXELS is another name for + * this constant. + * + * If the font is tricky and the glyph has been loaded with + * @FT_LOAD_NO_SCALE, the resulting CBox is meaningless. To get + * reasonable values for the CBox it is necessary to load the glyph at a + * large ppem value (so that the hinting instructions can properly shift + * and scale the subglyphs), then extracting the CBox, which can be + * eventually converted back to font units. + * + * Note that the maximum coordinates are exclusive, which means that one + * can compute the width and height of the glyph image (be it in integer + * or 26.6 pixels) as: + * + * ``` + * width = bbox.xMax - bbox.xMin; + * height = bbox.yMax - bbox.yMin; + * ``` + * + * Note also that for 26.6 coordinates, if `bbox_mode` is set to + * @FT_GLYPH_BBOX_GRIDFIT, the coordinates will also be grid-fitted, + * which corresponds to: + * + * ``` + * bbox.xMin = FLOOR(bbox.xMin); + * bbox.yMin = FLOOR(bbox.yMin); + * bbox.xMax = CEILING(bbox.xMax); + * bbox.yMax = CEILING(bbox.yMax); + * ``` + * + * To get the bbox in pixel coordinates, set `bbox_mode` to + * @FT_GLYPH_BBOX_TRUNCATE. + * + * To get the bbox in grid-fitted pixel coordinates, set `bbox_mode` to + * @FT_GLYPH_BBOX_PIXELS. + */ + FT_EXPORT( void ) + FT_Glyph_Get_CBox( FT_Glyph glyph, + FT_UInt bbox_mode, + FT_BBox *acbox ); + + + /************************************************************************** + * + * @function: + * FT_Glyph_To_Bitmap + * + * @description: + * Convert a given glyph object to a bitmap glyph object. + * + * @inout: + * the_glyph :: + * A pointer to a handle to the target glyph. + * + * @input: + * render_mode :: + * An enumeration that describes how the data is rendered. + * + * origin :: + * A pointer to a vector used to translate the glyph image before + * rendering. Can be~0 (if no translation). The origin is expressed + * in 26.6 pixels. + * + * destroy :: + * A boolean that indicates that the original glyph image should be + * destroyed by this function. It is never destroyed in case of error. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * This function does nothing if the glyph format isn't scalable. + * + * The glyph image is translated with the `origin` vector before + * rendering. + * + * The first parameter is a pointer to an @FT_Glyph handle that will be + * _replaced_ by this function (with newly allocated data). Typically, + * you would do something like the following (omitting error handling). + * + * ``` + * FT_Glyph glyph; + * FT_BitmapGlyph glyph_bitmap; + * + * + * // load glyph + * error = FT_Load_Char( face, glyph_index, FT_LOAD_DEFAULT ); + * + * // extract glyph image + * error = FT_Get_Glyph( face->glyph, &glyph ); + * + * // convert to a bitmap (default render mode + destroying old) + * if ( glyph->format != FT_GLYPH_FORMAT_BITMAP ) + * { + * error = FT_Glyph_To_Bitmap( &glyph, FT_RENDER_MODE_NORMAL, + * 0, 1 ); + * if ( error ) // `glyph' unchanged + * ... + * } + * + * // access bitmap content by typecasting + * glyph_bitmap = (FT_BitmapGlyph)glyph; + * + * // do funny stuff with it, like blitting/drawing + * ... + * + * // discard glyph image (bitmap or not) + * FT_Done_Glyph( glyph ); + * ``` + * + * Here is another example, again without error handling. + * + * ``` + * FT_Glyph glyphs[MAX_GLYPHS] + * + * + * ... + * + * for ( idx = 0; i < MAX_GLYPHS; i++ ) + * error = FT_Load_Glyph( face, idx, FT_LOAD_DEFAULT ) || + * FT_Get_Glyph ( face->glyph, &glyphs[idx] ); + * + * ... + * + * for ( idx = 0; i < MAX_GLYPHS; i++ ) + * { + * FT_Glyph bitmap = glyphs[idx]; + * + * + * ... + * + * // after this call, `bitmap' no longer points into + * // the `glyphs' array (and the old value isn't destroyed) + * FT_Glyph_To_Bitmap( &bitmap, FT_RENDER_MODE_MONO, 0, 0 ); + * + * ... + * + * FT_Done_Glyph( bitmap ); + * } + * + * ... + * + * for ( idx = 0; i < MAX_GLYPHS; i++ ) + * FT_Done_Glyph( glyphs[idx] ); + * ``` + */ + FT_EXPORT( FT_Error ) + FT_Glyph_To_Bitmap( FT_Glyph* the_glyph, + FT_Render_Mode render_mode, + const FT_Vector* origin, + FT_Bool destroy ); + + + /************************************************************************** + * + * @function: + * FT_Done_Glyph + * + * @description: + * Destroy a given glyph. + * + * @input: + * glyph :: + * A handle to the target glyph object. Can be `NULL`. + */ + FT_EXPORT( void ) + FT_Done_Glyph( FT_Glyph glyph ); + + /* */ + + + /* other helpful functions */ + + /************************************************************************** + * + * @section: + * computations + * + */ + + + /************************************************************************** + * + * @function: + * FT_Matrix_Multiply + * + * @description: + * Perform the matrix operation `b = a*b`. + * + * @input: + * a :: + * A pointer to matrix `a`. + * + * @inout: + * b :: + * A pointer to matrix `b`. + * + * @note: + * The result is undefined if either `a` or `b` is zero. + * + * Since the function uses wrap-around arithmetic, results become + * meaningless if the arguments are very large. + */ + FT_EXPORT( void ) + FT_Matrix_Multiply( const FT_Matrix* a, + FT_Matrix* b ); + + + /************************************************************************** + * + * @function: + * FT_Matrix_Invert + * + * @description: + * Invert a 2x2 matrix. Return an error if it can't be inverted. + * + * @inout: + * matrix :: + * A pointer to the target matrix. Remains untouched in case of error. + * + * @return: + * FreeType error code. 0~means success. + */ + FT_EXPORT( FT_Error ) + FT_Matrix_Invert( FT_Matrix* matrix ); + + /* */ + + +FT_END_HEADER + +#endif /* FTGLYPH_H_ */ + + +/* END */ + + +/* Local Variables: */ +/* coding: utf-8 */ +/* End: */ diff --git a/dependencies/winx64/include/freetype2/freetype/ftgxval.h b/dependencies/winx64/include/freetype2/freetype/ftgxval.h new file mode 100644 index 0000000..065cd53 --- /dev/null +++ b/dependencies/winx64/include/freetype2/freetype/ftgxval.h @@ -0,0 +1,354 @@ +/**************************************************************************** + * + * ftgxval.h + * + * FreeType API for validating TrueTypeGX/AAT tables (specification). + * + * Copyright (C) 2004-2024 by + * Masatake YAMATO, Redhat K.K, + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + +/**************************************************************************** + * + * gxvalid is derived from both gxlayout module and otvalid module. + * Development of gxlayout is supported by the Information-technology + * Promotion Agency(IPA), Japan. + * + */ + + +#ifndef FTGXVAL_H_ +#define FTGXVAL_H_ + +#include + +#ifdef FREETYPE_H +#error "freetype.h of FreeType 1 has been loaded!" +#error "Please fix the directory search order for header files" +#error "so that freetype.h of FreeType 2 is found first." +#endif + + +FT_BEGIN_HEADER + + + /************************************************************************** + * + * @section: + * gx_validation + * + * @title: + * TrueTypeGX/AAT Validation + * + * @abstract: + * An API to validate TrueTypeGX/AAT tables. + * + * @description: + * This section contains the declaration of functions to validate some + * TrueTypeGX tables (feat, mort, morx, bsln, just, kern, opbd, trak, + * prop, lcar). + * + * @order: + * FT_TrueTypeGX_Validate + * FT_TrueTypeGX_Free + * + * FT_ClassicKern_Validate + * FT_ClassicKern_Free + * + * FT_VALIDATE_GX_LENGTH + * FT_VALIDATE_GXXXX + * FT_VALIDATE_CKERNXXX + * + */ + + /************************************************************************** + * + * + * Warning: Use `FT_VALIDATE_XXX` to validate a table. + * Following definitions are for gxvalid developers. + * + * + */ + +#define FT_VALIDATE_feat_INDEX 0 +#define FT_VALIDATE_mort_INDEX 1 +#define FT_VALIDATE_morx_INDEX 2 +#define FT_VALIDATE_bsln_INDEX 3 +#define FT_VALIDATE_just_INDEX 4 +#define FT_VALIDATE_kern_INDEX 5 +#define FT_VALIDATE_opbd_INDEX 6 +#define FT_VALIDATE_trak_INDEX 7 +#define FT_VALIDATE_prop_INDEX 8 +#define FT_VALIDATE_lcar_INDEX 9 +#define FT_VALIDATE_GX_LAST_INDEX FT_VALIDATE_lcar_INDEX + + + /************************************************************************** + * + * @macro: + * FT_VALIDATE_GX_LENGTH + * + * @description: + * The number of tables checked in this module. Use it as a parameter + * for the `table-length` argument of function @FT_TrueTypeGX_Validate. + */ +#define FT_VALIDATE_GX_LENGTH ( FT_VALIDATE_GX_LAST_INDEX + 1 ) + + /* */ + + /* Up to 0x1000 is used by otvalid. + Ox2xxx is reserved for feature OT extension. */ +#define FT_VALIDATE_GX_START 0x4000 +#define FT_VALIDATE_GX_BITFIELD( tag ) \ + ( FT_VALIDATE_GX_START << FT_VALIDATE_##tag##_INDEX ) + + + /************************************************************************** + * + * @enum: + * FT_VALIDATE_GXXXX + * + * @description: + * A list of bit-field constants used with @FT_TrueTypeGX_Validate to + * indicate which TrueTypeGX/AAT Type tables should be validated. + * + * @values: + * FT_VALIDATE_feat :: + * Validate 'feat' table. + * + * FT_VALIDATE_mort :: + * Validate 'mort' table. + * + * FT_VALIDATE_morx :: + * Validate 'morx' table. + * + * FT_VALIDATE_bsln :: + * Validate 'bsln' table. + * + * FT_VALIDATE_just :: + * Validate 'just' table. + * + * FT_VALIDATE_kern :: + * Validate 'kern' table. + * + * FT_VALIDATE_opbd :: + * Validate 'opbd' table. + * + * FT_VALIDATE_trak :: + * Validate 'trak' table. + * + * FT_VALIDATE_prop :: + * Validate 'prop' table. + * + * FT_VALIDATE_lcar :: + * Validate 'lcar' table. + * + * FT_VALIDATE_GX :: + * Validate all TrueTypeGX tables (feat, mort, morx, bsln, just, kern, + * opbd, trak, prop and lcar). + * + */ + +#define FT_VALIDATE_feat FT_VALIDATE_GX_BITFIELD( feat ) +#define FT_VALIDATE_mort FT_VALIDATE_GX_BITFIELD( mort ) +#define FT_VALIDATE_morx FT_VALIDATE_GX_BITFIELD( morx ) +#define FT_VALIDATE_bsln FT_VALIDATE_GX_BITFIELD( bsln ) +#define FT_VALIDATE_just FT_VALIDATE_GX_BITFIELD( just ) +#define FT_VALIDATE_kern FT_VALIDATE_GX_BITFIELD( kern ) +#define FT_VALIDATE_opbd FT_VALIDATE_GX_BITFIELD( opbd ) +#define FT_VALIDATE_trak FT_VALIDATE_GX_BITFIELD( trak ) +#define FT_VALIDATE_prop FT_VALIDATE_GX_BITFIELD( prop ) +#define FT_VALIDATE_lcar FT_VALIDATE_GX_BITFIELD( lcar ) + +#define FT_VALIDATE_GX ( FT_VALIDATE_feat | \ + FT_VALIDATE_mort | \ + FT_VALIDATE_morx | \ + FT_VALIDATE_bsln | \ + FT_VALIDATE_just | \ + FT_VALIDATE_kern | \ + FT_VALIDATE_opbd | \ + FT_VALIDATE_trak | \ + FT_VALIDATE_prop | \ + FT_VALIDATE_lcar ) + + + /************************************************************************** + * + * @function: + * FT_TrueTypeGX_Validate + * + * @description: + * Validate various TrueTypeGX tables to assure that all offsets and + * indices are valid. The idea is that a higher-level library that + * actually does the text layout can access those tables without error + * checking (which can be quite time consuming). + * + * @input: + * face :: + * A handle to the input face. + * + * validation_flags :: + * A bit field that specifies the tables to be validated. See + * @FT_VALIDATE_GXXXX for possible values. + * + * table_length :: + * The size of the `tables` array. Normally, @FT_VALIDATE_GX_LENGTH + * should be passed. + * + * @output: + * tables :: + * The array where all validated sfnt tables are stored. The array + * itself must be allocated by a client. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * This function only works with TrueTypeGX fonts, returning an error + * otherwise. + * + * After use, the application should deallocate the buffers pointed to by + * each `tables` element, by calling @FT_TrueTypeGX_Free. A `NULL` value + * indicates that the table either doesn't exist in the font, the + * application hasn't asked for validation, or the validator doesn't have + * the ability to validate the sfnt table. + */ + FT_EXPORT( FT_Error ) + FT_TrueTypeGX_Validate( FT_Face face, + FT_UInt validation_flags, + FT_Bytes tables[FT_VALIDATE_GX_LENGTH], + FT_UInt table_length ); + + + /************************************************************************** + * + * @function: + * FT_TrueTypeGX_Free + * + * @description: + * Free the buffer allocated by TrueTypeGX validator. + * + * @input: + * face :: + * A handle to the input face. + * + * table :: + * The pointer to the buffer allocated by @FT_TrueTypeGX_Validate. + * + * @note: + * This function must be used to free the buffer allocated by + * @FT_TrueTypeGX_Validate only. + */ + FT_EXPORT( void ) + FT_TrueTypeGX_Free( FT_Face face, + FT_Bytes table ); + + + /************************************************************************** + * + * @enum: + * FT_VALIDATE_CKERNXXX + * + * @description: + * A list of bit-field constants used with @FT_ClassicKern_Validate to + * indicate the classic kern dialect or dialects. If the selected type + * doesn't fit, @FT_ClassicKern_Validate regards the table as invalid. + * + * @values: + * FT_VALIDATE_MS :: + * Handle the 'kern' table as a classic Microsoft kern table. + * + * FT_VALIDATE_APPLE :: + * Handle the 'kern' table as a classic Apple kern table. + * + * FT_VALIDATE_CKERN :: + * Handle the 'kern' as either classic Apple or Microsoft kern table. + */ +#define FT_VALIDATE_MS ( FT_VALIDATE_GX_START << 0 ) +#define FT_VALIDATE_APPLE ( FT_VALIDATE_GX_START << 1 ) + +#define FT_VALIDATE_CKERN ( FT_VALIDATE_MS | FT_VALIDATE_APPLE ) + + + /************************************************************************** + * + * @function: + * FT_ClassicKern_Validate + * + * @description: + * Validate classic (16-bit format) kern table to assure that the + * offsets and indices are valid. The idea is that a higher-level + * library that actually does the text layout can access those tables + * without error checking (which can be quite time consuming). + * + * The 'kern' table validator in @FT_TrueTypeGX_Validate deals with both + * the new 32-bit format and the classic 16-bit format, while + * FT_ClassicKern_Validate only supports the classic 16-bit format. + * + * @input: + * face :: + * A handle to the input face. + * + * validation_flags :: + * A bit field that specifies the dialect to be validated. See + * @FT_VALIDATE_CKERNXXX for possible values. + * + * @output: + * ckern_table :: + * A pointer to the kern table. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * After use, the application should deallocate the buffers pointed to by + * `ckern_table`, by calling @FT_ClassicKern_Free. A `NULL` value + * indicates that the table doesn't exist in the font. + */ + FT_EXPORT( FT_Error ) + FT_ClassicKern_Validate( FT_Face face, + FT_UInt validation_flags, + FT_Bytes *ckern_table ); + + + /************************************************************************** + * + * @function: + * FT_ClassicKern_Free + * + * @description: + * Free the buffer allocated by classic Kern validator. + * + * @input: + * face :: + * A handle to the input face. + * + * table :: + * The pointer to the buffer that is allocated by + * @FT_ClassicKern_Validate. + * + * @note: + * This function must be used to free the buffer allocated by + * @FT_ClassicKern_Validate only. + */ + FT_EXPORT( void ) + FT_ClassicKern_Free( FT_Face face, + FT_Bytes table ); + + /* */ + + +FT_END_HEADER + +#endif /* FTGXVAL_H_ */ + + +/* END */ diff --git a/dependencies/winx64/include/freetype2/freetype/ftgzip.h b/dependencies/winx64/include/freetype2/freetype/ftgzip.h new file mode 100644 index 0000000..9516dc0 --- /dev/null +++ b/dependencies/winx64/include/freetype2/freetype/ftgzip.h @@ -0,0 +1,151 @@ +/**************************************************************************** + * + * ftgzip.h + * + * Gzip-compressed stream support. + * + * Copyright (C) 2002-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + +#ifndef FTGZIP_H_ +#define FTGZIP_H_ + +#include + +#ifdef FREETYPE_H +#error "freetype.h of FreeType 1 has been loaded!" +#error "Please fix the directory search order for header files" +#error "so that freetype.h of FreeType 2 is found first." +#endif + + +FT_BEGIN_HEADER + + /************************************************************************** + * + * @section: + * gzip + * + * @title: + * GZIP Streams + * + * @abstract: + * Using gzip-compressed font files. + * + * @description: + * In certain builds of the library, gzip compression recognition is + * automatically handled when calling @FT_New_Face or @FT_Open_Face. + * This means that if no font driver is capable of handling the raw + * compressed file, the library will try to open a gzipped stream from it + * and re-open the face with it. + * + * The stream implementation is very basic and resets the decompression + * process each time seeking backwards is needed within the stream, + * which significantly undermines the performance. + * + * This section contains the declaration of Gzip-specific functions. + * + */ + + + /************************************************************************** + * + * @function: + * FT_Stream_OpenGzip + * + * @description: + * Open a new stream to parse gzip-compressed font files. This is mainly + * used to support the compressed `*.pcf.gz` fonts that come with + * XFree86. + * + * @input: + * stream :: + * The target embedding stream. + * + * source :: + * The source stream. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * The source stream must be opened _before_ calling this function. + * + * Calling the internal function `FT_Stream_Close` on the new stream will + * **not** call `FT_Stream_Close` on the source stream. None of the + * stream objects will be released to the heap. + * + * This function may return `FT_Err_Unimplemented_Feature` if your build + * of FreeType was not compiled with zlib support. + */ + FT_EXPORT( FT_Error ) + FT_Stream_OpenGzip( FT_Stream stream, + FT_Stream source ); + + + /************************************************************************** + * + * @function: + * FT_Gzip_Uncompress + * + * @description: + * Decompress a zipped input buffer into an output buffer. This function + * is modeled after zlib's `uncompress` function. + * + * @input: + * memory :: + * A FreeType memory handle. + * + * input :: + * The input buffer. + * + * input_len :: + * The length of the input buffer. + * + * @output: + * output :: + * The output buffer. + * + * @inout: + * output_len :: + * Before calling the function, this is the total size of the output + * buffer, which must be large enough to hold the entire uncompressed + * data (so the size of the uncompressed data must be known in + * advance). After calling the function, `output_len` is the size of + * the used data in `output`. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * This function may return `FT_Err_Unimplemented_Feature` if your build + * of FreeType was not compiled with zlib support. + * + * @since: + * 2.5.1 + */ + FT_EXPORT( FT_Error ) + FT_Gzip_Uncompress( FT_Memory memory, + FT_Byte* output, + FT_ULong* output_len, + const FT_Byte* input, + FT_ULong input_len ); + + /* */ + + +FT_END_HEADER + +#endif /* FTGZIP_H_ */ + + +/* END */ diff --git a/dependencies/winx64/include/freetype2/freetype/ftimage.h b/dependencies/winx64/include/freetype2/freetype/ftimage.h new file mode 100644 index 0000000..894dbdc --- /dev/null +++ b/dependencies/winx64/include/freetype2/freetype/ftimage.h @@ -0,0 +1,1293 @@ +/**************************************************************************** + * + * ftimage.h + * + * FreeType glyph image formats and default raster interface + * (specification). + * + * Copyright (C) 1996-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + /************************************************************************** + * + * Note: A 'raster' is simply a scan-line converter, used to render + * `FT_Outline`s into `FT_Bitmap`s. + * + * Note: This file can be used for `STANDALONE_` compilation of raster + * (B/W) and smooth (anti-aliased) renderers. Therefore, it must + * rely on standard variable types only instead of aliases in + * `fttypes.h`. + * + */ + + +#ifndef FTIMAGE_H_ +#define FTIMAGE_H_ + + +FT_BEGIN_HEADER + + + /************************************************************************** + * + * @section: + * basic_types + * + */ + + + /************************************************************************** + * + * @type: + * FT_Pos + * + * @description: + * The type FT_Pos is used to store vectorial coordinates. Depending on + * the context, these can represent distances in integer font units, or + * 16.16, or 26.6 fixed-point pixel coordinates. + */ + typedef signed long FT_Pos; + + + /************************************************************************** + * + * @struct: + * FT_Vector + * + * @description: + * A simple structure used to store a 2D vector; coordinates are of the + * FT_Pos type. + * + * @fields: + * x :: + * The horizontal coordinate. + * y :: + * The vertical coordinate. + */ + typedef struct FT_Vector_ + { + FT_Pos x; + FT_Pos y; + + } FT_Vector; + + + /************************************************************************** + * + * @struct: + * FT_BBox + * + * @description: + * A structure used to hold an outline's bounding box, i.e., the + * coordinates of its extrema in the horizontal and vertical directions. + * + * @fields: + * xMin :: + * The horizontal minimum (left-most). + * + * yMin :: + * The vertical minimum (bottom-most). + * + * xMax :: + * The horizontal maximum (right-most). + * + * yMax :: + * The vertical maximum (top-most). + * + * @note: + * The bounding box is specified with the coordinates of the lower left + * and the upper right corner. In PostScript, those values are often + * called (llx,lly) and (urx,ury), respectively. + * + * If `yMin` is negative, this value gives the glyph's descender. + * Otherwise, the glyph doesn't descend below the baseline. Similarly, + * if `ymax` is positive, this value gives the glyph's ascender. + * + * `xMin` gives the horizontal distance from the glyph's origin to the + * left edge of the glyph's bounding box. If `xMin` is negative, the + * glyph extends to the left of the origin. + */ + typedef struct FT_BBox_ + { + FT_Pos xMin, yMin; + FT_Pos xMax, yMax; + + } FT_BBox; + + + /************************************************************************** + * + * @enum: + * FT_Pixel_Mode + * + * @description: + * An enumeration type used to describe the format of pixels in a given + * bitmap. Note that additional formats may be added in the future. + * + * @values: + * FT_PIXEL_MODE_NONE :: + * Value~0 is reserved. + * + * FT_PIXEL_MODE_MONO :: + * A monochrome bitmap, using 1~bit per pixel. Note that pixels are + * stored in most-significant order (MSB), which means that the + * left-most pixel in a byte has value 128. + * + * FT_PIXEL_MODE_GRAY :: + * An 8-bit bitmap, generally used to represent anti-aliased glyph + * images. Each pixel is stored in one byte. Note that the number of + * 'gray' levels is stored in the `num_grays` field of the @FT_Bitmap + * structure (it generally is 256). + * + * FT_PIXEL_MODE_GRAY2 :: + * A 2-bit per pixel bitmap, used to represent embedded anti-aliased + * bitmaps in font files according to the OpenType specification. We + * haven't found a single font using this format, however. + * + * FT_PIXEL_MODE_GRAY4 :: + * A 4-bit per pixel bitmap, representing embedded anti-aliased bitmaps + * in font files according to the OpenType specification. We haven't + * found a single font using this format, however. + * + * FT_PIXEL_MODE_LCD :: + * An 8-bit bitmap, representing RGB or BGR decimated glyph images used + * for display on LCD displays; the bitmap is three times wider than + * the original glyph image. See also @FT_RENDER_MODE_LCD. + * + * FT_PIXEL_MODE_LCD_V :: + * An 8-bit bitmap, representing RGB or BGR decimated glyph images used + * for display on rotated LCD displays; the bitmap is three times + * taller than the original glyph image. See also + * @FT_RENDER_MODE_LCD_V. + * + * FT_PIXEL_MODE_BGRA :: + * [Since 2.5] An image with four 8-bit channels per pixel, + * representing a color image (such as emoticons) with alpha channel. + * For each pixel, the format is BGRA, which means, the blue channel + * comes first in memory. The color channels are pre-multiplied and in + * the sRGB colorspace. For example, full red at half-translucent + * opacity will be represented as '00,00,80,80', not '00,00,FF,80'. + * See also @FT_LOAD_COLOR. + */ + typedef enum FT_Pixel_Mode_ + { + FT_PIXEL_MODE_NONE = 0, + FT_PIXEL_MODE_MONO, + FT_PIXEL_MODE_GRAY, + FT_PIXEL_MODE_GRAY2, + FT_PIXEL_MODE_GRAY4, + FT_PIXEL_MODE_LCD, + FT_PIXEL_MODE_LCD_V, + FT_PIXEL_MODE_BGRA, + + FT_PIXEL_MODE_MAX /* do not remove */ + + } FT_Pixel_Mode; + + + /* these constants are deprecated; use the corresponding `FT_Pixel_Mode` */ + /* values instead. */ +#define ft_pixel_mode_none FT_PIXEL_MODE_NONE +#define ft_pixel_mode_mono FT_PIXEL_MODE_MONO +#define ft_pixel_mode_grays FT_PIXEL_MODE_GRAY +#define ft_pixel_mode_pal2 FT_PIXEL_MODE_GRAY2 +#define ft_pixel_mode_pal4 FT_PIXEL_MODE_GRAY4 + + /* */ + + /* For debugging, the @FT_Pixel_Mode enumeration must stay in sync */ + /* with the `pixel_modes` array in file `ftobjs.c`. */ + + + /************************************************************************** + * + * @struct: + * FT_Bitmap + * + * @description: + * A structure used to describe a bitmap or pixmap to the raster. Note + * that we now manage pixmaps of various depths through the `pixel_mode` + * field. + * + * @fields: + * rows :: + * The number of bitmap rows. + * + * width :: + * The number of pixels in bitmap row. + * + * pitch :: + * The pitch's absolute value is the number of bytes taken by one + * bitmap row, including padding. However, the pitch is positive when + * the bitmap has a 'down' flow, and negative when it has an 'up' flow. + * In all cases, the pitch is an offset to add to a bitmap pointer in + * order to go down one row. + * + * Note that 'padding' means the alignment of a bitmap to a byte + * border, and FreeType functions normally align to the smallest + * possible integer value. + * + * For the B/W rasterizer, `pitch` is always an even number. + * + * To change the pitch of a bitmap (say, to make it a multiple of 4), + * use @FT_Bitmap_Convert. Alternatively, you might use callback + * functions to directly render to the application's surface; see the + * file `example2.cpp` in the tutorial for a demonstration. + * + * buffer :: + * A typeless pointer to the bitmap buffer. This value should be + * aligned on 32-bit boundaries in most cases. + * + * num_grays :: + * This field is only used with @FT_PIXEL_MODE_GRAY; it gives the + * number of gray levels used in the bitmap. + * + * pixel_mode :: + * The pixel mode, i.e., how pixel bits are stored. See @FT_Pixel_Mode + * for possible values. + * + * palette_mode :: + * This field is intended for paletted pixel modes; it indicates how + * the palette is stored. Not used currently. + * + * palette :: + * A typeless pointer to the bitmap palette; this field is intended for + * paletted pixel modes. Not used currently. + * + * @note: + * `width` and `rows` refer to the *physical* size of the bitmap, not the + * *logical* one. For example, if @FT_Pixel_Mode is set to + * `FT_PIXEL_MODE_LCD`, the logical width is a just a third of the + * physical one. + * + * An empty bitmap with a NULL `buffer` is valid, with `rows` and/or + * `pitch` also set to 0. Such bitmaps might be produced while rendering + * empty or degenerate outlines. + */ + typedef struct FT_Bitmap_ + { + unsigned int rows; + unsigned int width; + int pitch; + unsigned char* buffer; + unsigned short num_grays; + unsigned char pixel_mode; + unsigned char palette_mode; + void* palette; + + } FT_Bitmap; + + + /************************************************************************** + * + * @section: + * outline_processing + * + */ + + + /************************************************************************** + * + * @struct: + * FT_Outline + * + * @description: + * This structure is used to describe an outline to the scan-line + * converter. + * + * @fields: + * n_contours :: + * The number of contours in the outline. + * + * n_points :: + * The number of points in the outline. + * + * points :: + * A pointer to an array of `n_points` @FT_Vector elements, giving the + * outline's point coordinates. + * + * tags :: + * A pointer to an array of `n_points` chars, giving each outline + * point's type. + * + * If bit~0 is unset, the point is 'off' the curve, i.e., a Bezier + * control point, while it is 'on' if set. + * + * Bit~1 is meaningful for 'off' points only. If set, it indicates a + * third-order Bezier arc control point; and a second-order control + * point if unset. + * + * If bit~2 is set, bits 5-7 contain the drop-out mode (as defined in + * the OpenType specification; the value is the same as the argument to + * the 'SCANTYPE' instruction). + * + * Bits 3 and~4 are reserved for internal purposes. + * + * contours :: + * An array of `n_contours` shorts, giving the end point of each + * contour within the outline. For example, the first contour is + * defined by the points '0' to `contours[0]`, the second one is + * defined by the points `contours[0]+1` to `contours[1]`, etc. + * + * flags :: + * A set of bit flags used to characterize the outline and give hints + * to the scan-converter and hinter on how to convert/grid-fit it. See + * @FT_OUTLINE_XXX. + * + * @note: + * The B/W rasterizer only checks bit~2 in the `tags` array for the first + * point of each contour. The drop-out mode as given with + * @FT_OUTLINE_IGNORE_DROPOUTS, @FT_OUTLINE_SMART_DROPOUTS, and + * @FT_OUTLINE_INCLUDE_STUBS in `flags` is then overridden. + */ + typedef struct FT_Outline_ + { + unsigned short n_contours; /* number of contours in glyph */ + unsigned short n_points; /* number of points in the glyph */ + + FT_Vector* points; /* the outline's points */ + unsigned char* tags; /* the points flags */ + unsigned short* contours; /* the contour end points */ + + int flags; /* outline masks */ + + } FT_Outline; + + /* */ + + /* Following limits must be consistent with */ + /* FT_Outline.{n_contours,n_points} */ +#define FT_OUTLINE_CONTOURS_MAX USHRT_MAX +#define FT_OUTLINE_POINTS_MAX USHRT_MAX + + + /************************************************************************** + * + * @enum: + * FT_OUTLINE_XXX + * + * @description: + * A list of bit-field constants used for the flags in an outline's + * `flags` field. + * + * @values: + * FT_OUTLINE_NONE :: + * Value~0 is reserved. + * + * FT_OUTLINE_OWNER :: + * If set, this flag indicates that the outline's field arrays (i.e., + * `points`, `flags`, and `contours`) are 'owned' by the outline + * object, and should thus be freed when it is destroyed. + * + * FT_OUTLINE_EVEN_ODD_FILL :: + * By default, outlines are filled using the non-zero winding rule. If + * set to 1, the outline will be filled using the even-odd fill rule + * (only works with the smooth rasterizer). + * + * FT_OUTLINE_REVERSE_FILL :: + * By default, outside contours of an outline are oriented in + * clock-wise direction, as defined in the TrueType specification. + * This flag is set if the outline uses the opposite direction + * (typically for Type~1 fonts). This flag is ignored by the scan + * converter. + * + * FT_OUTLINE_IGNORE_DROPOUTS :: + * By default, the scan converter will try to detect drop-outs in an + * outline and correct the glyph bitmap to ensure consistent shape + * continuity. If set, this flag hints the scan-line converter to + * ignore such cases. See below for more information. + * + * FT_OUTLINE_SMART_DROPOUTS :: + * Select smart dropout control. If unset, use simple dropout control. + * Ignored if @FT_OUTLINE_IGNORE_DROPOUTS is set. See below for more + * information. + * + * FT_OUTLINE_INCLUDE_STUBS :: + * If set, turn pixels on for 'stubs', otherwise exclude them. Ignored + * if @FT_OUTLINE_IGNORE_DROPOUTS is set. See below for more + * information. + * + * FT_OUTLINE_OVERLAP :: + * [Since 2.10.3] This flag indicates that this outline contains + * overlapping contours and the anti-aliased renderer should perform + * oversampling to mitigate possible artifacts. This flag should _not_ + * be set for well designed glyphs without overlaps because it quadruples + * the rendering time. + * + * FT_OUTLINE_HIGH_PRECISION :: + * This flag indicates that the scan-line converter should try to + * convert this outline to bitmaps with the highest possible quality. + * It is typically set for small character sizes. Note that this is + * only a hint that might be completely ignored by a given + * scan-converter. + * + * FT_OUTLINE_SINGLE_PASS :: + * This flag is set to force a given scan-converter to only use a + * single pass over the outline to render a bitmap glyph image. + * Normally, it is set for very large character sizes. It is only a + * hint that might be completely ignored by a given scan-converter. + * + * @note: + * The flags @FT_OUTLINE_IGNORE_DROPOUTS, @FT_OUTLINE_SMART_DROPOUTS, and + * @FT_OUTLINE_INCLUDE_STUBS are ignored by the smooth rasterizer. + * + * There exists a second mechanism to pass the drop-out mode to the B/W + * rasterizer; see the `tags` field in @FT_Outline. + * + * Please refer to the description of the 'SCANTYPE' instruction in the + * [OpenType specification](https://learn.microsoft.com/typography/opentype/spec/tt_instructions#scantype) + * how simple drop-outs, smart drop-outs, and stubs are defined. + */ +#define FT_OUTLINE_NONE 0x0 +#define FT_OUTLINE_OWNER 0x1 +#define FT_OUTLINE_EVEN_ODD_FILL 0x2 +#define FT_OUTLINE_REVERSE_FILL 0x4 +#define FT_OUTLINE_IGNORE_DROPOUTS 0x8 +#define FT_OUTLINE_SMART_DROPOUTS 0x10 +#define FT_OUTLINE_INCLUDE_STUBS 0x20 +#define FT_OUTLINE_OVERLAP 0x40 + +#define FT_OUTLINE_HIGH_PRECISION 0x100 +#define FT_OUTLINE_SINGLE_PASS 0x200 + + + /* these constants are deprecated; use the corresponding */ + /* `FT_OUTLINE_XXX` values instead */ +#define ft_outline_none FT_OUTLINE_NONE +#define ft_outline_owner FT_OUTLINE_OWNER +#define ft_outline_even_odd_fill FT_OUTLINE_EVEN_ODD_FILL +#define ft_outline_reverse_fill FT_OUTLINE_REVERSE_FILL +#define ft_outline_ignore_dropouts FT_OUTLINE_IGNORE_DROPOUTS +#define ft_outline_high_precision FT_OUTLINE_HIGH_PRECISION +#define ft_outline_single_pass FT_OUTLINE_SINGLE_PASS + + /* */ + +#define FT_CURVE_TAG( flag ) ( flag & 0x03 ) + + /* see the `tags` field in `FT_Outline` for a description of the values */ +#define FT_CURVE_TAG_ON 0x01 +#define FT_CURVE_TAG_CONIC 0x00 +#define FT_CURVE_TAG_CUBIC 0x02 + +#define FT_CURVE_TAG_HAS_SCANMODE 0x04 + +#define FT_CURVE_TAG_TOUCH_X 0x08 /* reserved for TrueType hinter */ +#define FT_CURVE_TAG_TOUCH_Y 0x10 /* reserved for TrueType hinter */ + +#define FT_CURVE_TAG_TOUCH_BOTH ( FT_CURVE_TAG_TOUCH_X | \ + FT_CURVE_TAG_TOUCH_Y ) + /* values 0x20, 0x40, and 0x80 are reserved */ + + + /* these constants are deprecated; use the corresponding */ + /* `FT_CURVE_TAG_XXX` values instead */ +#define FT_Curve_Tag_On FT_CURVE_TAG_ON +#define FT_Curve_Tag_Conic FT_CURVE_TAG_CONIC +#define FT_Curve_Tag_Cubic FT_CURVE_TAG_CUBIC +#define FT_Curve_Tag_Touch_X FT_CURVE_TAG_TOUCH_X +#define FT_Curve_Tag_Touch_Y FT_CURVE_TAG_TOUCH_Y + + + /************************************************************************** + * + * @functype: + * FT_Outline_MoveToFunc + * + * @description: + * A function pointer type used to describe the signature of a 'move to' + * function during outline walking/decomposition. + * + * A 'move to' is emitted to start a new contour in an outline. + * + * @input: + * to :: + * A pointer to the target point of the 'move to'. + * + * user :: + * A typeless pointer, which is passed from the caller of the + * decomposition function. + * + * @return: + * Error code. 0~means success. + */ + typedef int + (*FT_Outline_MoveToFunc)( const FT_Vector* to, + void* user ); + +#define FT_Outline_MoveTo_Func FT_Outline_MoveToFunc + + + /************************************************************************** + * + * @functype: + * FT_Outline_LineToFunc + * + * @description: + * A function pointer type used to describe the signature of a 'line to' + * function during outline walking/decomposition. + * + * A 'line to' is emitted to indicate a segment in the outline. + * + * @input: + * to :: + * A pointer to the target point of the 'line to'. + * + * user :: + * A typeless pointer, which is passed from the caller of the + * decomposition function. + * + * @return: + * Error code. 0~means success. + */ + typedef int + (*FT_Outline_LineToFunc)( const FT_Vector* to, + void* user ); + +#define FT_Outline_LineTo_Func FT_Outline_LineToFunc + + + /************************************************************************** + * + * @functype: + * FT_Outline_ConicToFunc + * + * @description: + * A function pointer type used to describe the signature of a 'conic to' + * function during outline walking or decomposition. + * + * A 'conic to' is emitted to indicate a second-order Bezier arc in the + * outline. + * + * @input: + * control :: + * An intermediate control point between the last position and the new + * target in `to`. + * + * to :: + * A pointer to the target end point of the conic arc. + * + * user :: + * A typeless pointer, which is passed from the caller of the + * decomposition function. + * + * @return: + * Error code. 0~means success. + */ + typedef int + (*FT_Outline_ConicToFunc)( const FT_Vector* control, + const FT_Vector* to, + void* user ); + +#define FT_Outline_ConicTo_Func FT_Outline_ConicToFunc + + + /************************************************************************** + * + * @functype: + * FT_Outline_CubicToFunc + * + * @description: + * A function pointer type used to describe the signature of a 'cubic to' + * function during outline walking or decomposition. + * + * A 'cubic to' is emitted to indicate a third-order Bezier arc. + * + * @input: + * control1 :: + * A pointer to the first Bezier control point. + * + * control2 :: + * A pointer to the second Bezier control point. + * + * to :: + * A pointer to the target end point. + * + * user :: + * A typeless pointer, which is passed from the caller of the + * decomposition function. + * + * @return: + * Error code. 0~means success. + */ + typedef int + (*FT_Outline_CubicToFunc)( const FT_Vector* control1, + const FT_Vector* control2, + const FT_Vector* to, + void* user ); + +#define FT_Outline_CubicTo_Func FT_Outline_CubicToFunc + + + /************************************************************************** + * + * @struct: + * FT_Outline_Funcs + * + * @description: + * A structure to hold various function pointers used during outline + * decomposition in order to emit segments, conic, and cubic Beziers. + * + * @fields: + * move_to :: + * The 'move to' emitter. + * + * line_to :: + * The segment emitter. + * + * conic_to :: + * The second-order Bezier arc emitter. + * + * cubic_to :: + * The third-order Bezier arc emitter. + * + * shift :: + * The shift that is applied to coordinates before they are sent to the + * emitter. + * + * delta :: + * The delta that is applied to coordinates before they are sent to the + * emitter, but after the shift. + * + * @note: + * The point coordinates sent to the emitters are the transformed version + * of the original coordinates (this is important for high accuracy + * during scan-conversion). The transformation is simple: + * + * ``` + * x' = (x << shift) - delta + * y' = (y << shift) - delta + * ``` + * + * Set the values of `shift` and `delta` to~0 to get the original point + * coordinates. + */ + typedef struct FT_Outline_Funcs_ + { + FT_Outline_MoveToFunc move_to; + FT_Outline_LineToFunc line_to; + FT_Outline_ConicToFunc conic_to; + FT_Outline_CubicToFunc cubic_to; + + int shift; + FT_Pos delta; + + } FT_Outline_Funcs; + + + /************************************************************************** + * + * @section: + * basic_types + * + */ + + + /************************************************************************** + * + * @macro: + * FT_IMAGE_TAG + * + * @description: + * This macro converts four-letter tags to an unsigned long type. + * + * @note: + * Since many 16-bit compilers don't like 32-bit enumerations, you should + * redefine this macro in case of problems to something like this: + * + * ``` + * #define FT_IMAGE_TAG( value, _x1, _x2, _x3, _x4 ) value + * ``` + * + * to get a simple enumeration without assigning special numbers. + */ +#ifndef FT_IMAGE_TAG + +#define FT_IMAGE_TAG( value, _x1, _x2, _x3, _x4 ) \ + value = ( ( FT_STATIC_BYTE_CAST( unsigned long, _x1 ) << 24 ) | \ + ( FT_STATIC_BYTE_CAST( unsigned long, _x2 ) << 16 ) | \ + ( FT_STATIC_BYTE_CAST( unsigned long, _x3 ) << 8 ) | \ + FT_STATIC_BYTE_CAST( unsigned long, _x4 ) ) + +#endif /* FT_IMAGE_TAG */ + + + /************************************************************************** + * + * @enum: + * FT_Glyph_Format + * + * @description: + * An enumeration type used to describe the format of a given glyph + * image. Note that this version of FreeType only supports two image + * formats, even though future font drivers will be able to register + * their own format. + * + * @values: + * FT_GLYPH_FORMAT_NONE :: + * The value~0 is reserved. + * + * FT_GLYPH_FORMAT_COMPOSITE :: + * The glyph image is a composite of several other images. This format + * is _only_ used with @FT_LOAD_NO_RECURSE, and is used to report + * compound glyphs (like accented characters). + * + * FT_GLYPH_FORMAT_BITMAP :: + * The glyph image is a bitmap, and can be described as an @FT_Bitmap. + * You generally need to access the `bitmap` field of the + * @FT_GlyphSlotRec structure to read it. + * + * FT_GLYPH_FORMAT_OUTLINE :: + * The glyph image is a vectorial outline made of line segments and + * Bezier arcs; it can be described as an @FT_Outline; you generally + * want to access the `outline` field of the @FT_GlyphSlotRec structure + * to read it. + * + * FT_GLYPH_FORMAT_PLOTTER :: + * The glyph image is a vectorial path with no inside and outside + * contours. Some Type~1 fonts, like those in the Hershey family, + * contain glyphs in this format. These are described as @FT_Outline, + * but FreeType isn't currently capable of rendering them correctly. + * + * FT_GLYPH_FORMAT_SVG :: + * [Since 2.12] The glyph is represented by an SVG document in the + * 'SVG~' table. + */ + typedef enum FT_Glyph_Format_ + { + FT_IMAGE_TAG( FT_GLYPH_FORMAT_NONE, 0, 0, 0, 0 ), + + FT_IMAGE_TAG( FT_GLYPH_FORMAT_COMPOSITE, 'c', 'o', 'm', 'p' ), + FT_IMAGE_TAG( FT_GLYPH_FORMAT_BITMAP, 'b', 'i', 't', 's' ), + FT_IMAGE_TAG( FT_GLYPH_FORMAT_OUTLINE, 'o', 'u', 't', 'l' ), + FT_IMAGE_TAG( FT_GLYPH_FORMAT_PLOTTER, 'p', 'l', 'o', 't' ), + FT_IMAGE_TAG( FT_GLYPH_FORMAT_SVG, 'S', 'V', 'G', ' ' ) + + } FT_Glyph_Format; + + + /* these constants are deprecated; use the corresponding */ + /* `FT_Glyph_Format` values instead. */ +#define ft_glyph_format_none FT_GLYPH_FORMAT_NONE +#define ft_glyph_format_composite FT_GLYPH_FORMAT_COMPOSITE +#define ft_glyph_format_bitmap FT_GLYPH_FORMAT_BITMAP +#define ft_glyph_format_outline FT_GLYPH_FORMAT_OUTLINE +#define ft_glyph_format_plotter FT_GLYPH_FORMAT_PLOTTER + + + /*************************************************************************/ + /*************************************************************************/ + /*************************************************************************/ + /***** *****/ + /***** R A S T E R D E F I N I T I O N S *****/ + /***** *****/ + /*************************************************************************/ + /*************************************************************************/ + /*************************************************************************/ + + + + /************************************************************************** + * + * @section: + * raster + * + * @title: + * Scanline Converter + * + * @abstract: + * How vectorial outlines are converted into bitmaps and pixmaps. + * + * @description: + * A raster or a rasterizer is a scan converter in charge of producing a + * pixel coverage bitmap that can be used as an alpha channel when + * compositing a glyph with a background. FreeType comes with two + * rasterizers: bilevel `raster1` and anti-aliased `smooth` are two + * separate modules. They are usually called from the high-level + * @FT_Load_Glyph or @FT_Render_Glyph functions and produce the entire + * coverage bitmap at once, while staying largely invisible to users. + * + * Instead of working with complete coverage bitmaps, it is also possible + * to intercept consecutive pixel runs on the same scanline with the same + * coverage, called _spans_, and process them individually. Only the + * `smooth` rasterizer permits this when calling @FT_Outline_Render with + * @FT_Raster_Params as described below. + * + * Working with either complete bitmaps or spans it is important to think + * of them as colorless coverage objects suitable as alpha channels to + * blend arbitrary colors with a background. For best results, it is + * recommended to use gamma correction, too. + * + * This section also describes the public API needed to set up alternative + * @FT_Renderer modules. + * + * @order: + * FT_Span + * FT_SpanFunc + * FT_Raster_Params + * FT_RASTER_FLAG_XXX + * + * FT_Raster + * FT_Raster_NewFunc + * FT_Raster_DoneFunc + * FT_Raster_ResetFunc + * FT_Raster_SetModeFunc + * FT_Raster_RenderFunc + * FT_Raster_Funcs + * + */ + + + /************************************************************************** + * + * @struct: + * FT_Span + * + * @description: + * A structure to model a single span of consecutive pixels when + * rendering an anti-aliased bitmap. + * + * @fields: + * x :: + * The span's horizontal start position. + * + * len :: + * The span's length in pixels. + * + * coverage :: + * The span color/coverage, ranging from 0 (background) to 255 + * (foreground). + * + * @note: + * This structure is used by the span drawing callback type named + * @FT_SpanFunc that takes the y~coordinate of the span as a parameter. + * + * The anti-aliased rasterizer produces coverage values from 0 to 255, + * that is, from completely transparent to completely opaque. + */ + typedef struct FT_Span_ + { + short x; + unsigned short len; + unsigned char coverage; + + } FT_Span; + + + /************************************************************************** + * + * @functype: + * FT_SpanFunc + * + * @description: + * A function used as a call-back by the anti-aliased renderer in order + * to let client applications draw themselves the pixel spans on each + * scan line. + * + * @input: + * y :: + * The scanline's upward y~coordinate. + * + * count :: + * The number of spans to draw on this scanline. + * + * spans :: + * A table of `count` spans to draw on the scanline. + * + * user :: + * User-supplied data that is passed to the callback. + * + * @note: + * This callback allows client applications to directly render the spans + * of the anti-aliased bitmap to any kind of surfaces. + * + * This can be used to write anti-aliased outlines directly to a given + * background bitmap using alpha compositing. It can also be used for + * oversampling and averaging. + */ + typedef void + (*FT_SpanFunc)( int y, + int count, + const FT_Span* spans, + void* user ); + +#define FT_Raster_Span_Func FT_SpanFunc + + + /************************************************************************** + * + * @functype: + * FT_Raster_BitTest_Func + * + * @description: + * Deprecated, unimplemented. + */ + typedef int + (*FT_Raster_BitTest_Func)( int y, + int x, + void* user ); + + + /************************************************************************** + * + * @functype: + * FT_Raster_BitSet_Func + * + * @description: + * Deprecated, unimplemented. + */ + typedef void + (*FT_Raster_BitSet_Func)( int y, + int x, + void* user ); + + + /************************************************************************** + * + * @enum: + * FT_RASTER_FLAG_XXX + * + * @description: + * A list of bit flag constants as used in the `flags` field of a + * @FT_Raster_Params structure. + * + * @values: + * FT_RASTER_FLAG_DEFAULT :: + * This value is 0. + * + * FT_RASTER_FLAG_AA :: + * This flag is set to indicate that an anti-aliased glyph image should + * be generated. Otherwise, it will be monochrome (1-bit). + * + * FT_RASTER_FLAG_DIRECT :: + * This flag is set to indicate direct rendering. In this mode, client + * applications must provide their own span callback. This lets them + * directly draw or compose over an existing bitmap. If this bit is + * _not_ set, the target pixmap's buffer _must_ be zeroed before + * rendering and the output will be clipped to its size. + * + * Direct rendering is only possible with anti-aliased glyphs. + * + * FT_RASTER_FLAG_CLIP :: + * This flag is only used in direct rendering mode. If set, the output + * will be clipped to a box specified in the `clip_box` field of the + * @FT_Raster_Params structure. Otherwise, the `clip_box` is + * effectively set to the bounding box and all spans are generated. + * + * FT_RASTER_FLAG_SDF :: + * This flag is set to indicate that a signed distance field glyph + * image should be generated. This is only used while rendering with + * the @FT_RENDER_MODE_SDF render mode. + */ +#define FT_RASTER_FLAG_DEFAULT 0x0 +#define FT_RASTER_FLAG_AA 0x1 +#define FT_RASTER_FLAG_DIRECT 0x2 +#define FT_RASTER_FLAG_CLIP 0x4 +#define FT_RASTER_FLAG_SDF 0x8 + + /* these constants are deprecated; use the corresponding */ + /* `FT_RASTER_FLAG_XXX` values instead */ +#define ft_raster_flag_default FT_RASTER_FLAG_DEFAULT +#define ft_raster_flag_aa FT_RASTER_FLAG_AA +#define ft_raster_flag_direct FT_RASTER_FLAG_DIRECT +#define ft_raster_flag_clip FT_RASTER_FLAG_CLIP + + + /************************************************************************** + * + * @struct: + * FT_Raster_Params + * + * @description: + * A structure to hold the parameters used by a raster's render function, + * passed as an argument to @FT_Outline_Render. + * + * @fields: + * target :: + * The target bitmap. + * + * source :: + * A pointer to the source glyph image (e.g., an @FT_Outline). + * + * flags :: + * The rendering flags. + * + * gray_spans :: + * The gray span drawing callback. + * + * black_spans :: + * Unused. + * + * bit_test :: + * Unused. + * + * bit_set :: + * Unused. + * + * user :: + * User-supplied data that is passed to each drawing callback. + * + * clip_box :: + * An optional span clipping box expressed in _integer_ pixels + * (not in 26.6 fixed-point units). + * + * @note: + * The @FT_RASTER_FLAG_AA bit flag must be set in the `flags` to + * generate an anti-aliased glyph bitmap, otherwise a monochrome bitmap + * is generated. The `target` should have appropriate pixel mode and its + * dimensions define the clipping region. + * + * If both @FT_RASTER_FLAG_AA and @FT_RASTER_FLAG_DIRECT bit flags + * are set in `flags`, the raster calls an @FT_SpanFunc callback + * `gray_spans` with `user` data as an argument ignoring `target`. This + * allows direct composition over a pre-existing user surface to perform + * the span drawing and composition. To optionally clip the spans, set + * the @FT_RASTER_FLAG_CLIP flag and `clip_box`. The monochrome raster + * does not support the direct mode. + * + * The gray-level rasterizer always uses 256 gray levels. If you want + * fewer gray levels, you have to use @FT_RASTER_FLAG_DIRECT and reduce + * the levels in the callback function. + */ + typedef struct FT_Raster_Params_ + { + const FT_Bitmap* target; + const void* source; + int flags; + FT_SpanFunc gray_spans; + FT_SpanFunc black_spans; /* unused */ + FT_Raster_BitTest_Func bit_test; /* unused */ + FT_Raster_BitSet_Func bit_set; /* unused */ + void* user; + FT_BBox clip_box; + + } FT_Raster_Params; + + + /************************************************************************** + * + * @type: + * FT_Raster + * + * @description: + * An opaque handle (pointer) to a raster object. Each object can be + * used independently to convert an outline into a bitmap or pixmap. + * + * @note: + * In FreeType 2, all rasters are now encapsulated within specific + * @FT_Renderer modules and only used in their context. + * + */ + typedef struct FT_RasterRec_* FT_Raster; + + + /************************************************************************** + * + * @functype: + * FT_Raster_NewFunc + * + * @description: + * A function used to create a new raster object. + * + * @input: + * memory :: + * A handle to the memory allocator. + * + * @output: + * raster :: + * A handle to the new raster object. + * + * @return: + * Error code. 0~means success. + * + * @note: + * The `memory` parameter is a typeless pointer in order to avoid + * un-wanted dependencies on the rest of the FreeType code. In practice, + * it is an @FT_Memory object, i.e., a handle to the standard FreeType + * memory allocator. However, this field can be completely ignored by a + * given raster implementation. + */ + typedef int + (*FT_Raster_NewFunc)( void* memory, + FT_Raster* raster ); + +#define FT_Raster_New_Func FT_Raster_NewFunc + + + /************************************************************************** + * + * @functype: + * FT_Raster_DoneFunc + * + * @description: + * A function used to destroy a given raster object. + * + * @input: + * raster :: + * A handle to the raster object. + */ + typedef void + (*FT_Raster_DoneFunc)( FT_Raster raster ); + +#define FT_Raster_Done_Func FT_Raster_DoneFunc + + + /************************************************************************** + * + * @functype: + * FT_Raster_ResetFunc + * + * @description: + * FreeType used to provide an area of memory called the 'render pool' + * available to all registered rasterizers. This was not thread safe, + * however, and now FreeType never allocates this pool. + * + * This function is called after a new raster object is created. + * + * @input: + * raster :: + * A handle to the new raster object. + * + * pool_base :: + * Previously, the address in memory of the render pool. Set this to + * `NULL`. + * + * pool_size :: + * Previously, the size in bytes of the render pool. Set this to 0. + * + * @note: + * Rasterizers should rely on dynamic or stack allocation if they want to + * (a handle to the memory allocator is passed to the rasterizer + * constructor). + */ + typedef void + (*FT_Raster_ResetFunc)( FT_Raster raster, + unsigned char* pool_base, + unsigned long pool_size ); + +#define FT_Raster_Reset_Func FT_Raster_ResetFunc + + + /************************************************************************** + * + * @functype: + * FT_Raster_SetModeFunc + * + * @description: + * This function is a generic facility to change modes or attributes in a + * given raster. This can be used for debugging purposes, or simply to + * allow implementation-specific 'features' in a given raster module. + * + * @input: + * raster :: + * A handle to the new raster object. + * + * mode :: + * A 4-byte tag used to name the mode or property. + * + * args :: + * A pointer to the new mode/property to use. + */ + typedef int + (*FT_Raster_SetModeFunc)( FT_Raster raster, + unsigned long mode, + void* args ); + +#define FT_Raster_Set_Mode_Func FT_Raster_SetModeFunc + + + /************************************************************************** + * + * @functype: + * FT_Raster_RenderFunc + * + * @description: + * Invoke a given raster to scan-convert a given glyph image into a + * target bitmap. + * + * @input: + * raster :: + * A handle to the raster object. + * + * params :: + * A pointer to an @FT_Raster_Params structure used to store the + * rendering parameters. + * + * @return: + * Error code. 0~means success. + * + * @note: + * The exact format of the source image depends on the raster's glyph + * format defined in its @FT_Raster_Funcs structure. It can be an + * @FT_Outline or anything else in order to support a large array of + * glyph formats. + * + * Note also that the render function can fail and return a + * `FT_Err_Unimplemented_Feature` error code if the raster used does not + * support direct composition. + */ + typedef int + (*FT_Raster_RenderFunc)( FT_Raster raster, + const FT_Raster_Params* params ); + +#define FT_Raster_Render_Func FT_Raster_RenderFunc + + + /************************************************************************** + * + * @struct: + * FT_Raster_Funcs + * + * @description: + * A structure used to describe a given raster class to the library. + * + * @fields: + * glyph_format :: + * The supported glyph format for this raster. + * + * raster_new :: + * The raster constructor. + * + * raster_reset :: + * Used to reset the render pool within the raster. + * + * raster_render :: + * A function to render a glyph into a given bitmap. + * + * raster_done :: + * The raster destructor. + */ + typedef struct FT_Raster_Funcs_ + { + FT_Glyph_Format glyph_format; + + FT_Raster_NewFunc raster_new; + FT_Raster_ResetFunc raster_reset; + FT_Raster_SetModeFunc raster_set_mode; + FT_Raster_RenderFunc raster_render; + FT_Raster_DoneFunc raster_done; + + } FT_Raster_Funcs; + + /* */ + + +FT_END_HEADER + +#endif /* FTIMAGE_H_ */ + + +/* END */ + + +/* Local Variables: */ +/* coding: utf-8 */ +/* End: */ diff --git a/dependencies/winx64/include/freetype2/freetype/ftincrem.h b/dependencies/winx64/include/freetype2/freetype/ftincrem.h new file mode 100644 index 0000000..816581b --- /dev/null +++ b/dependencies/winx64/include/freetype2/freetype/ftincrem.h @@ -0,0 +1,348 @@ +/**************************************************************************** + * + * ftincrem.h + * + * FreeType incremental loading (specification). + * + * Copyright (C) 2002-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + +#ifndef FTINCREM_H_ +#define FTINCREM_H_ + +#include +#include + +#ifdef FREETYPE_H +#error "freetype.h of FreeType 1 has been loaded!" +#error "Please fix the directory search order for header files" +#error "so that freetype.h of FreeType 2 is found first." +#endif + + +FT_BEGIN_HEADER + + /************************************************************************** + * + * @section: + * incremental + * + * @title: + * Incremental Loading + * + * @abstract: + * Custom Glyph Loading. + * + * @description: + * This section contains various functions used to perform so-called + * 'incremental' glyph loading. This is a mode where all glyphs loaded + * from a given @FT_Face are provided by the client application. + * + * Apart from that, all other tables are loaded normally from the font + * file. This mode is useful when FreeType is used within another + * engine, e.g., a PostScript Imaging Processor. + * + * To enable this mode, you must use @FT_Open_Face, passing an + * @FT_Parameter with the @FT_PARAM_TAG_INCREMENTAL tag and an + * @FT_Incremental_Interface value. See the comments for + * @FT_Incremental_InterfaceRec for an example. + * + */ + + + /************************************************************************** + * + * @type: + * FT_Incremental + * + * @description: + * An opaque type describing a user-provided object used to implement + * 'incremental' glyph loading within FreeType. This is used to support + * embedded fonts in certain environments (e.g., PostScript + * interpreters), where the glyph data isn't in the font file, or must be + * overridden by different values. + * + * @note: + * It is up to client applications to create and implement + * @FT_Incremental objects, as long as they provide implementations for + * the methods @FT_Incremental_GetGlyphDataFunc, + * @FT_Incremental_FreeGlyphDataFunc and + * @FT_Incremental_GetGlyphMetricsFunc. + * + * See the description of @FT_Incremental_InterfaceRec to understand how + * to use incremental objects with FreeType. + * + */ + typedef struct FT_IncrementalRec_* FT_Incremental; + + + /************************************************************************** + * + * @struct: + * FT_Incremental_MetricsRec + * + * @description: + * A small structure used to contain the basic glyph metrics returned by + * the @FT_Incremental_GetGlyphMetricsFunc method. + * + * @fields: + * bearing_x :: + * Left bearing, in font units. + * + * bearing_y :: + * Top bearing, in font units. + * + * advance :: + * Horizontal component of glyph advance, in font units. + * + * advance_v :: + * Vertical component of glyph advance, in font units. + * + * @note: + * These correspond to horizontal or vertical metrics depending on the + * value of the `vertical` argument to the function + * @FT_Incremental_GetGlyphMetricsFunc. + * + */ + typedef struct FT_Incremental_MetricsRec_ + { + FT_Long bearing_x; + FT_Long bearing_y; + FT_Long advance; + FT_Long advance_v; /* since 2.3.12 */ + + } FT_Incremental_MetricsRec; + + + /************************************************************************** + * + * @struct: + * FT_Incremental_Metrics + * + * @description: + * A handle to an @FT_Incremental_MetricsRec structure. + * + */ + typedef struct FT_Incremental_MetricsRec_* FT_Incremental_Metrics; + + + /************************************************************************** + * + * @type: + * FT_Incremental_GetGlyphDataFunc + * + * @description: + * A function called by FreeType to access a given glyph's data bytes + * during @FT_Load_Glyph or @FT_Load_Char if incremental loading is + * enabled. + * + * Note that the format of the glyph's data bytes depends on the font + * file format. For TrueType, it must correspond to the raw bytes within + * the 'glyf' table. For PostScript formats, it must correspond to the + * **unencrypted** charstring bytes, without any `lenIV` header. It is + * undefined for any other format. + * + * @input: + * incremental :: + * Handle to an opaque @FT_Incremental handle provided by the client + * application. + * + * glyph_index :: + * Index of relevant glyph. + * + * @output: + * adata :: + * A structure describing the returned glyph data bytes (which will be + * accessed as a read-only byte block). + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * If this function returns successfully the method + * @FT_Incremental_FreeGlyphDataFunc will be called later to release the + * data bytes. + * + * Nested calls to @FT_Incremental_GetGlyphDataFunc can happen for + * compound glyphs. + * + */ + typedef FT_Error + (*FT_Incremental_GetGlyphDataFunc)( FT_Incremental incremental, + FT_UInt glyph_index, + FT_Data* adata ); + + + /************************************************************************** + * + * @type: + * FT_Incremental_FreeGlyphDataFunc + * + * @description: + * A function used to release the glyph data bytes returned by a + * successful call to @FT_Incremental_GetGlyphDataFunc. + * + * @input: + * incremental :: + * A handle to an opaque @FT_Incremental handle provided by the client + * application. + * + * data :: + * A structure describing the glyph data bytes (which will be accessed + * as a read-only byte block). + * + */ + typedef void + (*FT_Incremental_FreeGlyphDataFunc)( FT_Incremental incremental, + FT_Data* data ); + + + /************************************************************************** + * + * @type: + * FT_Incremental_GetGlyphMetricsFunc + * + * @description: + * A function used to retrieve the basic metrics of a given glyph index + * before accessing its data. This allows for handling font types such + * as PCL~XL Format~1, Class~2 downloaded TrueType fonts, where the glyph + * metrics (`hmtx` and `vmtx` tables) are permitted to be omitted from + * the font, and the relevant metrics included in the header of the glyph + * outline data. Importantly, this is not intended to allow custom glyph + * metrics (for example, Postscript Metrics dictionaries), because that + * conflicts with the requirements of outline hinting. Such custom + * metrics must be handled separately, by the calling application. + * + * @input: + * incremental :: + * A handle to an opaque @FT_Incremental handle provided by the client + * application. + * + * glyph_index :: + * Index of relevant glyph. + * + * vertical :: + * If true, return vertical metrics. + * + * ametrics :: + * This parameter is used for both input and output. The original + * glyph metrics, if any, in font units. If metrics are not available + * all the values must be set to zero. + * + * @output: + * ametrics :: + * The glyph metrics in font units. + * + */ + typedef FT_Error + (*FT_Incremental_GetGlyphMetricsFunc) + ( FT_Incremental incremental, + FT_UInt glyph_index, + FT_Bool vertical, + FT_Incremental_MetricsRec *ametrics ); + + + /************************************************************************** + * + * @struct: + * FT_Incremental_FuncsRec + * + * @description: + * A table of functions for accessing fonts that load data incrementally. + * Used in @FT_Incremental_InterfaceRec. + * + * @fields: + * get_glyph_data :: + * The function to get glyph data. Must not be null. + * + * free_glyph_data :: + * The function to release glyph data. Must not be null. + * + * get_glyph_metrics :: + * The function to get glyph metrics. May be null if the font does not + * require it. + * + */ + typedef struct FT_Incremental_FuncsRec_ + { + FT_Incremental_GetGlyphDataFunc get_glyph_data; + FT_Incremental_FreeGlyphDataFunc free_glyph_data; + FT_Incremental_GetGlyphMetricsFunc get_glyph_metrics; + + } FT_Incremental_FuncsRec; + + + /************************************************************************** + * + * @struct: + * FT_Incremental_InterfaceRec + * + * @description: + * A structure to be used with @FT_Open_Face to indicate that the user + * wants to support incremental glyph loading. You should use it with + * @FT_PARAM_TAG_INCREMENTAL as in the following example: + * + * ``` + * FT_Incremental_InterfaceRec inc_int; + * FT_Parameter parameter; + * FT_Open_Args open_args; + * + * + * // set up incremental descriptor + * inc_int.funcs = my_funcs; + * inc_int.object = my_object; + * + * // set up optional parameter + * parameter.tag = FT_PARAM_TAG_INCREMENTAL; + * parameter.data = &inc_int; + * + * // set up FT_Open_Args structure + * open_args.flags = FT_OPEN_PATHNAME | FT_OPEN_PARAMS; + * open_args.pathname = my_font_pathname; + * open_args.num_params = 1; + * open_args.params = ¶meter; // we use one optional argument + * + * // open the font + * error = FT_Open_Face( library, &open_args, index, &face ); + * ... + * ``` + * + */ + typedef struct FT_Incremental_InterfaceRec_ + { + const FT_Incremental_FuncsRec* funcs; + FT_Incremental object; + + } FT_Incremental_InterfaceRec; + + + /************************************************************************** + * + * @type: + * FT_Incremental_Interface + * + * @description: + * A pointer to an @FT_Incremental_InterfaceRec structure. + * + */ + typedef FT_Incremental_InterfaceRec* FT_Incremental_Interface; + + + /* */ + + +FT_END_HEADER + +#endif /* FTINCREM_H_ */ + + +/* END */ diff --git a/dependencies/winx64/include/freetype2/freetype/ftlcdfil.h b/dependencies/winx64/include/freetype2/freetype/ftlcdfil.h new file mode 100644 index 0000000..25274dc --- /dev/null +++ b/dependencies/winx64/include/freetype2/freetype/ftlcdfil.h @@ -0,0 +1,323 @@ +/**************************************************************************** + * + * ftlcdfil.h + * + * FreeType API for color filtering of subpixel bitmap glyphs + * (specification). + * + * Copyright (C) 2006-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + +#ifndef FTLCDFIL_H_ +#define FTLCDFIL_H_ + +#include +#include + +#ifdef FREETYPE_H +#error "freetype.h of FreeType 1 has been loaded!" +#error "Please fix the directory search order for header files" +#error "so that freetype.h of FreeType 2 is found first." +#endif + + +FT_BEGIN_HEADER + + /************************************************************************** + * + * @section: + * lcd_rendering + * + * @title: + * Subpixel Rendering + * + * @abstract: + * API to control subpixel rendering. + * + * @description: + * FreeType provides two alternative subpixel rendering technologies. + * Should you define `FT_CONFIG_OPTION_SUBPIXEL_RENDERING` in your + * `ftoption.h` file, this enables ClearType-style rendering. + * Otherwise, Harmony LCD rendering is enabled. These technologies are + * controlled differently and API described below, although always + * available, performs its function when appropriate method is enabled + * and does nothing otherwise. + * + * ClearType-style LCD rendering exploits the color-striped structure of + * LCD pixels, increasing the available resolution in the direction of + * the stripe (usually horizontal RGB) by a factor of~3. Using the + * subpixel coverages unfiltered can create severe color fringes + * especially when rendering thin features. Indeed, to produce + * black-on-white text, the nearby color subpixels must be dimmed + * evenly. Therefore, an equalizing 5-tap FIR filter should be applied + * to subpixel coverages regardless of pixel boundaries and should have + * these properties: + * + * 1. It should be symmetrical, like {~a, b, c, b, a~}, to avoid + * any shifts in appearance. + * + * 2. It should be color-balanced, meaning a~+ b~=~c, to reduce color + * fringes by distributing the computed coverage for one subpixel to + * all subpixels equally. + * + * 3. It should be normalized, meaning 2a~+ 2b~+ c~=~1.0 to maintain + * overall brightness. + * + * Boxy 3-tap filter {0, 1/3, 1/3, 1/3, 0} is sharper but is less + * forgiving of non-ideal gamma curves of a screen (and viewing angles), + * beveled filters are fuzzier but more tolerant. + * + * Use the @FT_Library_SetLcdFilter or @FT_Library_SetLcdFilterWeights + * API to specify a low-pass filter, which is then applied to + * subpixel-rendered bitmaps generated through @FT_Render_Glyph. + * + * Harmony LCD rendering is suitable to panels with any regular subpixel + * structure, not just monitors with 3 color striped subpixels, as long + * as the color subpixels have fixed positions relative to the pixel + * center. In this case, each color channel can be rendered separately + * after shifting the outline opposite to the subpixel shift so that the + * coverage maps are aligned. This method is immune to color fringes + * because the shifts do not change integral coverage. + * + * The subpixel geometry must be specified by xy-coordinates for each + * subpixel. By convention they may come in the RGB order: {{-1/3, 0}, + * {0, 0}, {1/3, 0}} for standard RGB striped panel or {{-1/6, 1/4}, + * {-1/6, -1/4}, {1/3, 0}} for a certain PenTile panel. + * + * Use the @FT_Library_SetLcdGeometry API to specify subpixel positions. + * If one follows the RGB order convention, the same order applies to the + * resulting @FT_PIXEL_MODE_LCD and @FT_PIXEL_MODE_LCD_V bitmaps. Note, + * however, that the coordinate frame for the latter must be rotated + * clockwise. Harmony with default LCD geometry is equivalent to + * ClearType with light filter. + * + * As a result of ClearType filtering or Harmony shifts, the resulting + * dimensions of LCD bitmaps can be slightly wider or taller than the + * dimensions the original outline with regard to the pixel grid. + * For example, for @FT_RENDER_MODE_LCD, the filter adds 2~subpixels to + * the left, and 2~subpixels to the right. The bitmap offset values are + * adjusted accordingly, so clients shouldn't need to modify their layout + * and glyph positioning code when enabling the filter. + * + * The ClearType and Harmony rendering is applicable to glyph bitmaps + * rendered through @FT_Render_Glyph, @FT_Load_Glyph, @FT_Load_Char, and + * @FT_Glyph_To_Bitmap, when @FT_RENDER_MODE_LCD or @FT_RENDER_MODE_LCD_V + * is specified. This API does not control @FT_Outline_Render and + * @FT_Outline_Get_Bitmap. + * + * The described algorithms can completely remove color artefacts when + * combined with gamma-corrected alpha blending in linear space. Each of + * the 3~alpha values (subpixels) must by independently used to blend one + * color channel. That is, red alpha blends the red channel of the text + * color with the red channel of the background pixel. + */ + + + /************************************************************************** + * + * @enum: + * FT_LcdFilter + * + * @description: + * A list of values to identify various types of LCD filters. + * + * @values: + * FT_LCD_FILTER_NONE :: + * Do not perform filtering. When used with subpixel rendering, this + * results in sometimes severe color fringes. + * + * FT_LCD_FILTER_DEFAULT :: + * This is a beveled, normalized, and color-balanced five-tap filter + * with weights of [0x08 0x4D 0x56 0x4D 0x08] in 1/256 units. + * + * FT_LCD_FILTER_LIGHT :: + * this is a boxy, normalized, and color-balanced three-tap filter with + * weights of [0x00 0x55 0x56 0x55 0x00] in 1/256 units. + * + * FT_LCD_FILTER_LEGACY :: + * FT_LCD_FILTER_LEGACY1 :: + * This filter corresponds to the original libXft color filter. It + * provides high contrast output but can exhibit really bad color + * fringes if glyphs are not extremely well hinted to the pixel grid. + * This filter is only provided for comparison purposes, and might be + * disabled or stay unsupported in the future. The second value is + * provided for compatibility with FontConfig, which historically used + * different enumeration, sometimes incorrectly forwarded to FreeType. + * + * @since: + * 2.3.0 (`FT_LCD_FILTER_LEGACY1` since 2.6.2) + */ + typedef enum FT_LcdFilter_ + { + FT_LCD_FILTER_NONE = 0, + FT_LCD_FILTER_DEFAULT = 1, + FT_LCD_FILTER_LIGHT = 2, + FT_LCD_FILTER_LEGACY1 = 3, + FT_LCD_FILTER_LEGACY = 16, + + FT_LCD_FILTER_MAX /* do not remove */ + + } FT_LcdFilter; + + + /************************************************************************** + * + * @function: + * FT_Library_SetLcdFilter + * + * @description: + * This function is used to change filter applied to LCD decimated + * bitmaps, like the ones used when calling @FT_Render_Glyph with + * @FT_RENDER_MODE_LCD or @FT_RENDER_MODE_LCD_V. + * + * @input: + * library :: + * A handle to the target library instance. + * + * filter :: + * The filter type. + * + * You can use @FT_LCD_FILTER_NONE here to disable this feature, or + * @FT_LCD_FILTER_DEFAULT to use a default filter that should work well + * on most LCD screens. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * Since 2.10.3 the LCD filtering is enabled with @FT_LCD_FILTER_DEFAULT. + * It is no longer necessary to call this function explicitly except + * to choose a different filter or disable filtering altogether with + * @FT_LCD_FILTER_NONE. + * + * This function does nothing but returns `FT_Err_Unimplemented_Feature` + * if the configuration macro `FT_CONFIG_OPTION_SUBPIXEL_RENDERING` is + * not defined in your build of the library. + * + * @since: + * 2.3.0 + */ + FT_EXPORT( FT_Error ) + FT_Library_SetLcdFilter( FT_Library library, + FT_LcdFilter filter ); + + + /************************************************************************** + * + * @function: + * FT_Library_SetLcdFilterWeights + * + * @description: + * This function can be used to enable LCD filter with custom weights, + * instead of using presets in @FT_Library_SetLcdFilter. + * + * @input: + * library :: + * A handle to the target library instance. + * + * weights :: + * A pointer to an array; the function copies the first five bytes and + * uses them to specify the filter weights in 1/256 units. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * This function does nothing but returns `FT_Err_Unimplemented_Feature` + * if the configuration macro `FT_CONFIG_OPTION_SUBPIXEL_RENDERING` is + * not defined in your build of the library. + * + * LCD filter weights can also be set per face using @FT_Face_Properties + * with @FT_PARAM_TAG_LCD_FILTER_WEIGHTS. + * + * @since: + * 2.4.0 + */ + FT_EXPORT( FT_Error ) + FT_Library_SetLcdFilterWeights( FT_Library library, + unsigned char *weights ); + + + /************************************************************************** + * + * @type: + * FT_LcdFiveTapFilter + * + * @description: + * A typedef for passing the five LCD filter weights to + * @FT_Face_Properties within an @FT_Parameter structure. + * + * @since: + * 2.8 + * + */ +#define FT_LCD_FILTER_FIVE_TAPS 5 + + typedef FT_Byte FT_LcdFiveTapFilter[FT_LCD_FILTER_FIVE_TAPS]; + + + /************************************************************************** + * + * @function: + * FT_Library_SetLcdGeometry + * + * @description: + * This function can be used to modify default positions of color + * subpixels, which controls Harmony LCD rendering. + * + * @input: + * library :: + * A handle to the target library instance. + * + * sub :: + * A pointer to an array of 3 vectors in 26.6 fractional pixel format; + * the function modifies the default values, see the note below. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * Subpixel geometry examples: + * + * - {{-21, 0}, {0, 0}, {21, 0}} is the default, corresponding to 3 color + * stripes shifted by a third of a pixel. This could be an RGB panel. + * + * - {{21, 0}, {0, 0}, {-21, 0}} looks the same as the default but can + * specify a BGR panel instead, while keeping the bitmap in the same + * RGB888 format. + * + * - {{0, 21}, {0, 0}, {0, -21}} is the vertical RGB, but the bitmap + * stays RGB888 as a result. + * + * - {{-11, 16}, {-11, -16}, {22, 0}} is a certain PenTile arrangement. + * + * This function does nothing and returns `FT_Err_Unimplemented_Feature` + * in the context of ClearType-style subpixel rendering when + * `FT_CONFIG_OPTION_SUBPIXEL_RENDERING` is defined in your build of the + * library. + * + * @since: + * 2.10.0 + */ + FT_EXPORT( FT_Error ) + FT_Library_SetLcdGeometry( FT_Library library, + FT_Vector sub[3] ); + + /* */ + + +FT_END_HEADER + +#endif /* FTLCDFIL_H_ */ + + +/* END */ diff --git a/dependencies/winx64/include/freetype2/freetype/ftlist.h b/dependencies/winx64/include/freetype2/freetype/ftlist.h new file mode 100644 index 0000000..972fbfa --- /dev/null +++ b/dependencies/winx64/include/freetype2/freetype/ftlist.h @@ -0,0 +1,296 @@ +/**************************************************************************** + * + * ftlist.h + * + * Generic list support for FreeType (specification). + * + * Copyright (C) 1996-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + + /************************************************************************** + * + * This file implements functions relative to list processing. Its data + * structures are defined in `freetype.h`. + * + */ + + +#ifndef FTLIST_H_ +#define FTLIST_H_ + + +#include + +#ifdef FREETYPE_H +#error "freetype.h of FreeType 1 has been loaded!" +#error "Please fix the directory search order for header files" +#error "so that freetype.h of FreeType 2 is found first." +#endif + + +FT_BEGIN_HEADER + + + /************************************************************************** + * + * @section: + * list_processing + * + * @title: + * List Processing + * + * @abstract: + * Simple management of lists. + * + * @description: + * This section contains various definitions related to list processing + * using doubly-linked nodes. + * + * @order: + * FT_List + * FT_ListNode + * FT_ListRec + * FT_ListNodeRec + * + * FT_List_Add + * FT_List_Insert + * FT_List_Find + * FT_List_Remove + * FT_List_Up + * FT_List_Iterate + * FT_List_Iterator + * FT_List_Finalize + * FT_List_Destructor + * + */ + + + /************************************************************************** + * + * @function: + * FT_List_Find + * + * @description: + * Find the list node for a given listed object. + * + * @input: + * list :: + * A pointer to the parent list. + * data :: + * The address of the listed object. + * + * @return: + * List node. `NULL` if it wasn't found. + */ + FT_EXPORT( FT_ListNode ) + FT_List_Find( FT_List list, + void* data ); + + + /************************************************************************** + * + * @function: + * FT_List_Add + * + * @description: + * Append an element to the end of a list. + * + * @inout: + * list :: + * A pointer to the parent list. + * node :: + * The node to append. + */ + FT_EXPORT( void ) + FT_List_Add( FT_List list, + FT_ListNode node ); + + + /************************************************************************** + * + * @function: + * FT_List_Insert + * + * @description: + * Insert an element at the head of a list. + * + * @inout: + * list :: + * A pointer to parent list. + * node :: + * The node to insert. + */ + FT_EXPORT( void ) + FT_List_Insert( FT_List list, + FT_ListNode node ); + + + /************************************************************************** + * + * @function: + * FT_List_Remove + * + * @description: + * Remove a node from a list. This function doesn't check whether the + * node is in the list! + * + * @input: + * node :: + * The node to remove. + * + * @inout: + * list :: + * A pointer to the parent list. + */ + FT_EXPORT( void ) + FT_List_Remove( FT_List list, + FT_ListNode node ); + + + /************************************************************************** + * + * @function: + * FT_List_Up + * + * @description: + * Move a node to the head/top of a list. Used to maintain LRU lists. + * + * @inout: + * list :: + * A pointer to the parent list. + * node :: + * The node to move. + */ + FT_EXPORT( void ) + FT_List_Up( FT_List list, + FT_ListNode node ); + + + /************************************************************************** + * + * @functype: + * FT_List_Iterator + * + * @description: + * An FT_List iterator function that is called during a list parse by + * @FT_List_Iterate. + * + * @input: + * node :: + * The current iteration list node. + * + * user :: + * A typeless pointer passed to @FT_List_Iterate. Can be used to point + * to the iteration's state. + */ + typedef FT_Error + (*FT_List_Iterator)( FT_ListNode node, + void* user ); + + + /************************************************************************** + * + * @function: + * FT_List_Iterate + * + * @description: + * Parse a list and calls a given iterator function on each element. + * Note that parsing is stopped as soon as one of the iterator calls + * returns a non-zero value. + * + * @input: + * list :: + * A handle to the list. + * iterator :: + * An iterator function, called on each node of the list. + * user :: + * A user-supplied field that is passed as the second argument to the + * iterator. + * + * @return: + * The result (a FreeType error code) of the last iterator call. + */ + FT_EXPORT( FT_Error ) + FT_List_Iterate( FT_List list, + FT_List_Iterator iterator, + void* user ); + + + /************************************************************************** + * + * @functype: + * FT_List_Destructor + * + * @description: + * An @FT_List iterator function that is called during a list + * finalization by @FT_List_Finalize to destroy all elements in a given + * list. + * + * @input: + * system :: + * The current system object. + * + * data :: + * The current object to destroy. + * + * user :: + * A typeless pointer passed to @FT_List_Iterate. It can be used to + * point to the iteration's state. + */ + typedef void + (*FT_List_Destructor)( FT_Memory memory, + void* data, + void* user ); + + + /************************************************************************** + * + * @function: + * FT_List_Finalize + * + * @description: + * Destroy all elements in the list as well as the list itself. + * + * @input: + * list :: + * A handle to the list. + * + * destroy :: + * A list destructor that will be applied to each element of the list. + * Set this to `NULL` if not needed. + * + * memory :: + * The current memory object that handles deallocation. + * + * user :: + * A user-supplied field that is passed as the last argument to the + * destructor. + * + * @note: + * This function expects that all nodes added by @FT_List_Add or + * @FT_List_Insert have been dynamically allocated. + */ + FT_EXPORT( void ) + FT_List_Finalize( FT_List list, + FT_List_Destructor destroy, + FT_Memory memory, + void* user ); + + /* */ + + +FT_END_HEADER + +#endif /* FTLIST_H_ */ + + +/* END */ diff --git a/dependencies/winx64/include/freetype2/freetype/ftlogging.h b/dependencies/winx64/include/freetype2/freetype/ftlogging.h new file mode 100644 index 0000000..1813cfc --- /dev/null +++ b/dependencies/winx64/include/freetype2/freetype/ftlogging.h @@ -0,0 +1,184 @@ +/**************************************************************************** + * + * ftlogging.h + * + * Additional debugging APIs. + * + * Copyright (C) 2020-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + +#ifndef FTLOGGING_H_ +#define FTLOGGING_H_ + + +#include +#include FT_CONFIG_CONFIG_H + + +FT_BEGIN_HEADER + + + /************************************************************************** + * + * @section: + * debugging_apis + * + * @title: + * External Debugging APIs + * + * @abstract: + * Public APIs to control the `FT_DEBUG_LOGGING` macro. + * + * @description: + * This section contains the declarations of public functions that + * enables fine control of what the `FT_DEBUG_LOGGING` macro outputs. + * + */ + + + /************************************************************************** + * + * @function: + * FT_Trace_Set_Level + * + * @description: + * Change the levels of tracing components of FreeType at run time. + * + * @input: + * tracing_level :: + * New tracing value. + * + * @example: + * The following call makes FreeType trace everything but the 'memory' + * component. + * + * ``` + * FT_Trace_Set_Level( "any:7 memory:0" ); + * ``` + * + * @note: + * This function does nothing if compilation option `FT_DEBUG_LOGGING` + * isn't set. + * + * @since: + * 2.11 + * + */ + FT_EXPORT( void ) + FT_Trace_Set_Level( const char* tracing_level ); + + + /************************************************************************** + * + * @function: + * FT_Trace_Set_Default_Level + * + * @description: + * Reset tracing value of FreeType's components to the default value + * (i.e., to the value of the `FT2_DEBUG` environment value or to NULL + * if `FT2_DEBUG` is not set). + * + * @note: + * This function does nothing if compilation option `FT_DEBUG_LOGGING` + * isn't set. + * + * @since: + * 2.11 + * + */ + FT_EXPORT( void ) + FT_Trace_Set_Default_Level( void ); + + + /************************************************************************** + * + * @functype: + * FT_Custom_Log_Handler + * + * @description: + * A function typedef that is used to handle the logging of tracing and + * debug messages on a file system. + * + * @input: + * ft_component :: + * The name of `FT_COMPONENT` from which the current debug or error + * message is produced. + * + * fmt :: + * Actual debug or tracing message. + * + * args:: + * Arguments of debug or tracing messages. + * + * @since: + * 2.11 + * + */ + typedef void + (*FT_Custom_Log_Handler)( const char* ft_component, + const char* fmt, + va_list args ); + + + /************************************************************************** + * + * @function: + * FT_Set_Log_Handler + * + * @description: + * A function to set a custom log handler. + * + * @input: + * handler :: + * New logging function. + * + * @note: + * This function does nothing if compilation option `FT_DEBUG_LOGGING` + * isn't set. + * + * @since: + * 2.11 + * + */ + FT_EXPORT( void ) + FT_Set_Log_Handler( FT_Custom_Log_Handler handler ); + + + /************************************************************************** + * + * @function: + * FT_Set_Default_Log_Handler + * + * @description: + * A function to undo the effect of @FT_Set_Log_Handler, resetting the + * log handler to FreeType's built-in version. + * + * @note: + * This function does nothing if compilation option `FT_DEBUG_LOGGING` + * isn't set. + * + * @since: + * 2.11 + * + */ + FT_EXPORT( void ) + FT_Set_Default_Log_Handler( void ); + + /* */ + + +FT_END_HEADER + +#endif /* FTLOGGING_H_ */ + + +/* END */ diff --git a/dependencies/winx64/include/freetype2/freetype/ftlzw.h b/dependencies/winx64/include/freetype2/freetype/ftlzw.h new file mode 100644 index 0000000..bcf59ba --- /dev/null +++ b/dependencies/winx64/include/freetype2/freetype/ftlzw.h @@ -0,0 +1,100 @@ +/**************************************************************************** + * + * ftlzw.h + * + * LZW-compressed stream support. + * + * Copyright (C) 2004-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + +#ifndef FTLZW_H_ +#define FTLZW_H_ + +#include + +#ifdef FREETYPE_H +#error "freetype.h of FreeType 1 has been loaded!" +#error "Please fix the directory search order for header files" +#error "so that freetype.h of FreeType 2 is found first." +#endif + + +FT_BEGIN_HEADER + + /************************************************************************** + * + * @section: + * lzw + * + * @title: + * LZW Streams + * + * @abstract: + * Using LZW-compressed font files. + * + * @description: + * In certain builds of the library, LZW compression recognition is + * automatically handled when calling @FT_New_Face or @FT_Open_Face. + * This means that if no font driver is capable of handling the raw + * compressed file, the library will try to open a LZW stream from it and + * re-open the face with it. + * + * The stream implementation is very basic and resets the decompression + * process each time seeking backwards is needed within the stream, + * which significantly undermines the performance. + * + * This section contains the declaration of LZW-specific functions. + * + */ + + /************************************************************************** + * + * @function: + * FT_Stream_OpenLZW + * + * @description: + * Open a new stream to parse LZW-compressed font files. This is mainly + * used to support the compressed `*.pcf.Z` fonts that come with XFree86. + * + * @input: + * stream :: + * The target embedding stream. + * + * source :: + * The source stream. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * The source stream must be opened _before_ calling this function. + * + * Calling the internal function `FT_Stream_Close` on the new stream will + * **not** call `FT_Stream_Close` on the source stream. None of the + * stream objects will be released to the heap. + * + * This function may return `FT_Err_Unimplemented_Feature` if your build + * of FreeType was not compiled with LZW support. + */ + FT_EXPORT( FT_Error ) + FT_Stream_OpenLZW( FT_Stream stream, + FT_Stream source ); + + /* */ + + +FT_END_HEADER + +#endif /* FTLZW_H_ */ + + +/* END */ diff --git a/dependencies/winx64/include/freetype2/freetype/ftmac.h b/dependencies/winx64/include/freetype2/freetype/ftmac.h new file mode 100644 index 0000000..e4efde3 --- /dev/null +++ b/dependencies/winx64/include/freetype2/freetype/ftmac.h @@ -0,0 +1,289 @@ +/**************************************************************************** + * + * ftmac.h + * + * Additional Mac-specific API. + * + * Copyright (C) 1996-2024 by + * Just van Rossum, David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + +/**************************************************************************** + * + * NOTE: Include this file after `FT_FREETYPE_H` and after any + * Mac-specific headers (because this header uses Mac types such as + * 'Handle', 'FSSpec', 'FSRef', etc.) + * + */ + + +#ifndef FTMAC_H_ +#define FTMAC_H_ + + + + +FT_BEGIN_HEADER + + + /* gcc-3.1 and later can warn about functions tagged as deprecated */ +#ifndef FT_DEPRECATED_ATTRIBUTE +#if defined( __GNUC__ ) && \ + ( ( __GNUC__ >= 4 ) || \ + ( ( __GNUC__ == 3 ) && ( __GNUC_MINOR__ >= 1 ) ) ) +#define FT_DEPRECATED_ATTRIBUTE __attribute__(( deprecated )) +#else +#define FT_DEPRECATED_ATTRIBUTE +#endif +#endif + + + /************************************************************************** + * + * @section: + * mac_specific + * + * @title: + * Mac Specific Interface + * + * @abstract: + * Only available on the Macintosh. + * + * @description: + * The following definitions are only available if FreeType is compiled + * on a Macintosh. + * + */ + + + /************************************************************************** + * + * @function: + * FT_New_Face_From_FOND + * + * @description: + * Create a new face object from a FOND resource. + * + * @inout: + * library :: + * A handle to the library resource. + * + * @input: + * fond :: + * A FOND resource. + * + * face_index :: + * Only supported for the -1 'sanity check' special case. + * + * @output: + * aface :: + * A handle to a new face object. + * + * @return: + * FreeType error code. 0~means success. + * + * @example: + * This function can be used to create @FT_Face objects from fonts that + * are installed in the system as follows. + * + * ``` + * fond = GetResource( 'FOND', fontName ); + * error = FT_New_Face_From_FOND( library, fond, 0, &face ); + * ``` + */ + FT_EXPORT( FT_Error ) + FT_New_Face_From_FOND( FT_Library library, + Handle fond, + FT_Long face_index, + FT_Face *aface ) + FT_DEPRECATED_ATTRIBUTE; + + + /************************************************************************** + * + * @function: + * FT_GetFile_From_Mac_Name + * + * @description: + * Return an FSSpec for the disk file containing the named font. + * + * @input: + * fontName :: + * Mac OS name of the font (e.g., Times New Roman Bold). + * + * @output: + * pathSpec :: + * FSSpec to the file. For passing to @FT_New_Face_From_FSSpec. + * + * face_index :: + * Index of the face. For passing to @FT_New_Face_From_FSSpec. + * + * @return: + * FreeType error code. 0~means success. + */ + FT_EXPORT( FT_Error ) + FT_GetFile_From_Mac_Name( const char* fontName, + FSSpec* pathSpec, + FT_Long* face_index ) + FT_DEPRECATED_ATTRIBUTE; + + + /************************************************************************** + * + * @function: + * FT_GetFile_From_Mac_ATS_Name + * + * @description: + * Return an FSSpec for the disk file containing the named font. + * + * @input: + * fontName :: + * Mac OS name of the font in ATS framework. + * + * @output: + * pathSpec :: + * FSSpec to the file. For passing to @FT_New_Face_From_FSSpec. + * + * face_index :: + * Index of the face. For passing to @FT_New_Face_From_FSSpec. + * + * @return: + * FreeType error code. 0~means success. + */ + FT_EXPORT( FT_Error ) + FT_GetFile_From_Mac_ATS_Name( const char* fontName, + FSSpec* pathSpec, + FT_Long* face_index ) + FT_DEPRECATED_ATTRIBUTE; + + + /************************************************************************** + * + * @function: + * FT_GetFilePath_From_Mac_ATS_Name + * + * @description: + * Return a pathname of the disk file and face index for given font name + * that is handled by ATS framework. + * + * @input: + * fontName :: + * Mac OS name of the font in ATS framework. + * + * @output: + * path :: + * Buffer to store pathname of the file. For passing to @FT_New_Face. + * The client must allocate this buffer before calling this function. + * + * maxPathSize :: + * Lengths of the buffer `path` that client allocated. + * + * face_index :: + * Index of the face. For passing to @FT_New_Face. + * + * @return: + * FreeType error code. 0~means success. + */ + FT_EXPORT( FT_Error ) + FT_GetFilePath_From_Mac_ATS_Name( const char* fontName, + UInt8* path, + UInt32 maxPathSize, + FT_Long* face_index ) + FT_DEPRECATED_ATTRIBUTE; + + + /************************************************************************** + * + * @function: + * FT_New_Face_From_FSSpec + * + * @description: + * Create a new face object from a given resource and typeface index + * using an FSSpec to the font file. + * + * @inout: + * library :: + * A handle to the library resource. + * + * @input: + * spec :: + * FSSpec to the font file. + * + * face_index :: + * The index of the face within the resource. The first face has + * index~0. + * @output: + * aface :: + * A handle to a new face object. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * @FT_New_Face_From_FSSpec is identical to @FT_New_Face except it + * accepts an FSSpec instead of a path. + */ + FT_EXPORT( FT_Error ) + FT_New_Face_From_FSSpec( FT_Library library, + const FSSpec *spec, + FT_Long face_index, + FT_Face *aface ) + FT_DEPRECATED_ATTRIBUTE; + + + /************************************************************************** + * + * @function: + * FT_New_Face_From_FSRef + * + * @description: + * Create a new face object from a given resource and typeface index + * using an FSRef to the font file. + * + * @inout: + * library :: + * A handle to the library resource. + * + * @input: + * spec :: + * FSRef to the font file. + * + * face_index :: + * The index of the face within the resource. The first face has + * index~0. + * @output: + * aface :: + * A handle to a new face object. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * @FT_New_Face_From_FSRef is identical to @FT_New_Face except it accepts + * an FSRef instead of a path. + */ + FT_EXPORT( FT_Error ) + FT_New_Face_From_FSRef( FT_Library library, + const FSRef *ref, + FT_Long face_index, + FT_Face *aface ) + FT_DEPRECATED_ATTRIBUTE; + + /* */ + + +FT_END_HEADER + + +#endif /* FTMAC_H_ */ + + +/* END */ diff --git a/dependencies/winx64/include/freetype2/freetype/ftmm.h b/dependencies/winx64/include/freetype2/freetype/ftmm.h new file mode 100644 index 0000000..9a4dab5 --- /dev/null +++ b/dependencies/winx64/include/freetype2/freetype/ftmm.h @@ -0,0 +1,846 @@ +/**************************************************************************** + * + * ftmm.h + * + * FreeType Multiple Master font interface (specification). + * + * Copyright (C) 1996-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + +#ifndef FTMM_H_ +#define FTMM_H_ + +#include + +#ifdef FREETYPE_H +#error "freetype.h of FreeType 1 has been loaded!" +#error "Please fix the directory search order for header files" +#error "so that freetype.h of FreeType 2 is found first." +#endif + + +FT_BEGIN_HEADER + + + /************************************************************************** + * + * @section: + * multiple_masters + * + * @title: + * Multiple Masters + * + * @abstract: + * How to manage Multiple Masters fonts. + * + * @description: + * The following types and functions are used to manage Multiple Master + * fonts, i.e., the selection of specific design instances by setting + * design axis coordinates. + * + * Besides Adobe MM fonts, the interface supports Apple's TrueType GX and + * OpenType variation fonts. Some of the routines only work with Adobe + * MM fonts, others will work with all three types. They are similar + * enough that a consistent interface makes sense. + * + * For Adobe MM fonts, macro @FT_IS_SFNT returns false. For GX and + * OpenType variation fonts, it returns true. + * + */ + + + /************************************************************************** + * + * @enum: + * T1_MAX_MM_XXX + * + * @description: + * Multiple Masters limits as defined in their specifications. + * + * @values: + * T1_MAX_MM_AXIS :: + * The maximum number of Multiple Masters axes. + * + * T1_MAX_MM_DESIGNS :: + * The maximum number of Multiple Masters designs. + * + * T1_MAX_MM_MAP_POINTS :: + * The maximum number of elements in a design map. + * + */ +#define T1_MAX_MM_AXIS 4 +#define T1_MAX_MM_DESIGNS 16 +#define T1_MAX_MM_MAP_POINTS 20 + + + /************************************************************************** + * + * @struct: + * FT_MM_Axis + * + * @description: + * A structure to model a given axis in design space for Multiple Masters + * fonts. + * + * This structure can't be used for TrueType GX or OpenType variation + * fonts. + * + * @fields: + * name :: + * The axis's name. + * + * minimum :: + * The axis's minimum design coordinate. + * + * maximum :: + * The axis's maximum design coordinate. + */ + typedef struct FT_MM_Axis_ + { + FT_String* name; + FT_Long minimum; + FT_Long maximum; + + } FT_MM_Axis; + + + /************************************************************************** + * + * @struct: + * FT_Multi_Master + * + * @description: + * A structure to model the axes and space of a Multiple Masters font. + * + * This structure can't be used for TrueType GX or OpenType variation + * fonts. + * + * @fields: + * num_axis :: + * Number of axes. Cannot exceed~4. + * + * num_designs :: + * Number of designs; should be normally 2^num_axis even though the + * Type~1 specification strangely allows for intermediate designs to be + * present. This number cannot exceed~16. + * + * axis :: + * A table of axis descriptors. + */ + typedef struct FT_Multi_Master_ + { + FT_UInt num_axis; + FT_UInt num_designs; + FT_MM_Axis axis[T1_MAX_MM_AXIS]; + + } FT_Multi_Master; + + + /************************************************************************** + * + * @struct: + * FT_Var_Axis + * + * @description: + * A structure to model a given axis in design space for Multiple + * Masters, TrueType GX, and OpenType variation fonts. + * + * @fields: + * name :: + * The axis's name. Not always meaningful for TrueType GX or OpenType + * variation fonts. + * + * minimum :: + * The axis's minimum design coordinate. + * + * def :: + * The axis's default design coordinate. FreeType computes meaningful + * default values for Adobe MM fonts. + * + * maximum :: + * The axis's maximum design coordinate. + * + * tag :: + * The axis's tag (the equivalent to 'name' for TrueType GX and + * OpenType variation fonts). FreeType provides default values for + * Adobe MM fonts if possible. + * + * strid :: + * The axis name entry in the font's 'name' table. This is another + * (and often better) version of the 'name' field for TrueType GX or + * OpenType variation fonts. Not meaningful for Adobe MM fonts. + * + * @note: + * The fields `minimum`, `def`, and `maximum` are 16.16 fractional values + * for TrueType GX and OpenType variation fonts. For Adobe MM fonts, the + * values are whole numbers (i.e., the fractional part is zero). + */ + typedef struct FT_Var_Axis_ + { + FT_String* name; + + FT_Fixed minimum; + FT_Fixed def; + FT_Fixed maximum; + + FT_ULong tag; + FT_UInt strid; + + } FT_Var_Axis; + + + /************************************************************************** + * + * @struct: + * FT_Var_Named_Style + * + * @description: + * A structure to model a named instance in a TrueType GX or OpenType + * variation font. + * + * This structure can't be used for Adobe MM fonts. + * + * @fields: + * coords :: + * The design coordinates for this instance. This is an array with one + * entry for each axis. + * + * strid :: + * The entry in 'name' table identifying this instance. + * + * psid :: + * The entry in 'name' table identifying a PostScript name for this + * instance. Value 0xFFFF indicates a missing entry. + */ + typedef struct FT_Var_Named_Style_ + { + FT_Fixed* coords; + FT_UInt strid; + FT_UInt psid; /* since 2.7.1 */ + + } FT_Var_Named_Style; + + + /************************************************************************** + * + * @struct: + * FT_MM_Var + * + * @description: + * A structure to model the axes and space of an Adobe MM, TrueType GX, + * or OpenType variation font. + * + * Some fields are specific to one format and not to the others. + * + * @fields: + * num_axis :: + * The number of axes. The maximum value is~4 for Adobe MM fonts; no + * limit in TrueType GX or OpenType variation fonts. + * + * num_designs :: + * The number of designs; should be normally 2^num_axis for Adobe MM + * fonts. Not meaningful for TrueType GX or OpenType variation fonts + * (where every glyph could have a different number of designs). + * + * num_namedstyles :: + * The number of named styles; a 'named style' is a tuple of design + * coordinates that has a string ID (in the 'name' table) associated + * with it. The font can tell the user that, for example, + * [Weight=1.5,Width=1.1] is 'Bold'. Another name for 'named style' is + * 'named instance'. + * + * For Adobe Multiple Masters fonts, this value is always zero because + * the format does not support named styles. + * + * axis :: + * An axis descriptor table. TrueType GX and OpenType variation fonts + * contain slightly more data than Adobe MM fonts. Memory management + * of this pointer is done internally by FreeType. + * + * namedstyle :: + * A named style (instance) table. Only meaningful for TrueType GX and + * OpenType variation fonts. Memory management of this pointer is done + * internally by FreeType. + */ + typedef struct FT_MM_Var_ + { + FT_UInt num_axis; + FT_UInt num_designs; + FT_UInt num_namedstyles; + FT_Var_Axis* axis; + FT_Var_Named_Style* namedstyle; + + } FT_MM_Var; + + + /************************************************************************** + * + * @function: + * FT_Get_Multi_Master + * + * @description: + * Retrieve a variation descriptor of a given Adobe MM font. + * + * This function can't be used with TrueType GX or OpenType variation + * fonts. + * + * @input: + * face :: + * A handle to the source face. + * + * @output: + * amaster :: + * The Multiple Masters descriptor. + * + * @return: + * FreeType error code. 0~means success. + */ + FT_EXPORT( FT_Error ) + FT_Get_Multi_Master( FT_Face face, + FT_Multi_Master *amaster ); + + + /************************************************************************** + * + * @function: + * FT_Get_MM_Var + * + * @description: + * Retrieve a variation descriptor for a given font. + * + * This function works with all supported variation formats. + * + * @input: + * face :: + * A handle to the source face. + * + * @output: + * amaster :: + * The variation descriptor. Allocates a data structure, which the + * user must deallocate with a call to @FT_Done_MM_Var after use. + * + * @return: + * FreeType error code. 0~means success. + */ + FT_EXPORT( FT_Error ) + FT_Get_MM_Var( FT_Face face, + FT_MM_Var* *amaster ); + + + /************************************************************************** + * + * @function: + * FT_Done_MM_Var + * + * @description: + * Free the memory allocated by @FT_Get_MM_Var. + * + * @input: + * library :: + * A handle of the face's parent library object that was used in the + * call to @FT_Get_MM_Var to create `amaster`. + * + * @return: + * FreeType error code. 0~means success. + */ + FT_EXPORT( FT_Error ) + FT_Done_MM_Var( FT_Library library, + FT_MM_Var *amaster ); + + + /************************************************************************** + * + * @function: + * FT_Set_MM_Design_Coordinates + * + * @description: + * For Adobe MM fonts, choose an interpolated font design through design + * coordinates. + * + * This function can't be used with TrueType GX or OpenType variation + * fonts. + * + * @inout: + * face :: + * A handle to the source face. + * + * @input: + * num_coords :: + * The number of available design coordinates. If it is larger than + * the number of axes, ignore the excess values. If it is smaller than + * the number of axes, use default values for the remaining axes. + * + * coords :: + * An array of design coordinates. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * [Since 2.8.1] To reset all axes to the default values, call the + * function with `num_coords` set to zero and `coords` set to `NULL`. + * + * [Since 2.9] If `num_coords` is larger than zero, this function sets + * the @FT_FACE_FLAG_VARIATION bit in @FT_Face's `face_flags` field + * (i.e., @FT_IS_VARIATION will return true). If `num_coords` is zero, + * this bit flag gets unset. + */ + FT_EXPORT( FT_Error ) + FT_Set_MM_Design_Coordinates( FT_Face face, + FT_UInt num_coords, + FT_Long* coords ); + + + /************************************************************************** + * + * @function: + * FT_Set_Var_Design_Coordinates + * + * @description: + * Choose an interpolated font design through design coordinates. + * + * This function works with all supported variation formats. + * + * @inout: + * face :: + * A handle to the source face. + * + * @input: + * num_coords :: + * The number of available design coordinates. If it is larger than + * the number of axes, ignore the excess values. If it is smaller than + * the number of axes, use default values for the remaining axes. + * + * coords :: + * An array of design coordinates. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * The design coordinates are 16.16 fractional values for TrueType GX and + * OpenType variation fonts. For Adobe MM fonts, the values are supposed + * to be whole numbers (i.e., the fractional part is zero). + * + * [Since 2.8.1] To reset all axes to the default values, call the + * function with `num_coords` set to zero and `coords` set to `NULL`. + * [Since 2.9] 'Default values' means the currently selected named + * instance (or the base font if no named instance is selected). + * + * [Since 2.9] If `num_coords` is larger than zero, this function sets + * the @FT_FACE_FLAG_VARIATION bit in @FT_Face's `face_flags` field + * (i.e., @FT_IS_VARIATION will return true). If `num_coords` is zero, + * this bit flag gets unset. + * + * [Since 2.14] This function also sets the @FT_FACE_FLAG_VARIATION bit + * in @FT_Face's `face_flags` field (i.e., @FT_IS_VARIATION will return + * true) if any of the provided coordinates is different from the face's + * default value for the corresponding axis, that is, the set up face is + * not at its default position. + */ + FT_EXPORT( FT_Error ) + FT_Set_Var_Design_Coordinates( FT_Face face, + FT_UInt num_coords, + FT_Fixed* coords ); + + + /************************************************************************** + * + * @function: + * FT_Get_Var_Design_Coordinates + * + * @description: + * Get the design coordinates of the currently selected interpolated + * font. + * + * This function works with all supported variation formats. + * + * @input: + * face :: + * A handle to the source face. + * + * num_coords :: + * The number of design coordinates to retrieve. If it is larger than + * the number of axes, set the excess values to~0. + * + * @output: + * coords :: + * The design coordinates array. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * The design coordinates are 16.16 fractional values for TrueType GX and + * OpenType variation fonts. For Adobe MM fonts, the values are whole + * numbers (i.e., the fractional part is zero). + * + * @since: + * 2.7.1 + */ + FT_EXPORT( FT_Error ) + FT_Get_Var_Design_Coordinates( FT_Face face, + FT_UInt num_coords, + FT_Fixed* coords ); + + + /************************************************************************** + * + * @function: + * FT_Set_MM_Blend_Coordinates + * + * @description: + * Choose an interpolated font design through normalized blend + * coordinates. + * + * This function works with all supported variation formats. + * + * @inout: + * face :: + * A handle to the source face. + * + * @input: + * num_coords :: + * The number of available design coordinates. If it is larger than + * the number of axes, ignore the excess values. If it is smaller than + * the number of axes, use default values for the remaining axes. + * + * coords :: + * The design coordinates array. Each element is a 16.16 fractional + * value and must be between 0 and 1.0 for Adobe MM fonts, and between + * -1.0 and 1.0 for TrueType GX and OpenType variation fonts. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * [Since 2.8.1] To reset all axes to the default values, call the + * function with `num_coords` set to zero and `coords` set to `NULL`. + * [Since 2.9] 'Default values' means the currently selected named + * instance (or the base font if no named instance is selected). + * + * [Since 2.9] If `num_coords` is larger than zero, this function sets + * the @FT_FACE_FLAG_VARIATION bit in @FT_Face's `face_flags` field + * (i.e., @FT_IS_VARIATION will return true). If `num_coords` is zero, + * this bit flag gets unset. + * + * [Since 2.14] This function also sets the @FT_FACE_FLAG_VARIATION bit + * in @FT_Face's `face_flags` field (i.e., @FT_IS_VARIATION will return + * true) if any of the provided coordinates is different from the face's + * default value for the corresponding axis, that is, the set up face is + * not at its default position. + */ + FT_EXPORT( FT_Error ) + FT_Set_MM_Blend_Coordinates( FT_Face face, + FT_UInt num_coords, + FT_Fixed* coords ); + + + /************************************************************************** + * + * @function: + * FT_Get_MM_Blend_Coordinates + * + * @description: + * Get the normalized blend coordinates of the currently selected + * interpolated font. + * + * This function works with all supported variation formats. + * + * @input: + * face :: + * A handle to the source face. + * + * num_coords :: + * The number of normalized blend coordinates to retrieve. If it is + * larger than the number of axes, set the excess values to~0.5 for + * Adobe MM fonts, and to~0 for TrueType GX and OpenType variation + * fonts. + * + * @output: + * coords :: + * The normalized blend coordinates array (as 16.16 fractional values). + * + * @return: + * FreeType error code. 0~means success. + * + * @since: + * 2.7.1 + */ + FT_EXPORT( FT_Error ) + FT_Get_MM_Blend_Coordinates( FT_Face face, + FT_UInt num_coords, + FT_Fixed* coords ); + + + /************************************************************************** + * + * @function: + * FT_Set_Var_Blend_Coordinates + * + * @description: + * This is another name of @FT_Set_MM_Blend_Coordinates. + */ + FT_EXPORT( FT_Error ) + FT_Set_Var_Blend_Coordinates( FT_Face face, + FT_UInt num_coords, + FT_Fixed* coords ); + + + /************************************************************************** + * + * @function: + * FT_Get_Var_Blend_Coordinates + * + * @description: + * This is another name of @FT_Get_MM_Blend_Coordinates. + * + * @since: + * 2.7.1 + */ + FT_EXPORT( FT_Error ) + FT_Get_Var_Blend_Coordinates( FT_Face face, + FT_UInt num_coords, + FT_Fixed* coords ); + + + /************************************************************************** + * + * @function: + * FT_Set_MM_WeightVector + * + * @description: + * For Adobe MM fonts, choose an interpolated font design by directly + * setting the weight vector. + * + * This function can't be used with TrueType GX or OpenType variation + * fonts. + * + * @inout: + * face :: + * A handle to the source face. + * + * @input: + * len :: + * The length of the weight vector array. If it is larger than the + * number of designs, the extra values are ignored. If it is less than + * the number of designs, the remaining values are set to zero. + * + * weightvector :: + * An array representing the weight vector. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * Adobe Multiple Master fonts limit the number of designs, and thus the + * length of the weight vector to 16~elements. + * + * If `len` is larger than zero, this function sets the + * @FT_FACE_FLAG_VARIATION bit in @FT_Face's `face_flags` field (i.e., + * @FT_IS_VARIATION will return true). If `len` is zero, this bit flag + * is unset and the weight vector array is reset to the default values. + * + * The Adobe documentation also states that the values in the + * WeightVector array must total 1.0 +/-~0.001. In practice this does + * not seem to be enforced, so is not enforced here, either. + * + * @since: + * 2.10 + */ + FT_EXPORT( FT_Error ) + FT_Set_MM_WeightVector( FT_Face face, + FT_UInt len, + FT_Fixed* weightvector ); + + + /************************************************************************** + * + * @function: + * FT_Get_MM_WeightVector + * + * @description: + * For Adobe MM fonts, retrieve the current weight vector of the font. + * + * This function can't be used with TrueType GX or OpenType variation + * fonts. + * + * @inout: + * face :: + * A handle to the source face. + * + * len :: + * A pointer to the size of the array to be filled. If the size of the + * array is less than the number of designs, `FT_Err_Invalid_Argument` + * is returned, and `len` is set to the required size (the number of + * designs). If the size of the array is greater than the number of + * designs, the remaining entries are set to~0. On successful + * completion, `len` is set to the number of designs (i.e., the number + * of values written to the array). + * + * @output: + * weightvector :: + * An array to be filled. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * Adobe Multiple Master fonts limit the number of designs, and thus the + * length of the WeightVector to~16. + * + * @since: + * 2.10 + */ + FT_EXPORT( FT_Error ) + FT_Get_MM_WeightVector( FT_Face face, + FT_UInt* len, + FT_Fixed* weightvector ); + + + /************************************************************************** + * + * @enum: + * FT_VAR_AXIS_FLAG_XXX + * + * @description: + * A list of bit flags used in the return value of + * @FT_Get_Var_Axis_Flags. + * + * @values: + * FT_VAR_AXIS_FLAG_HIDDEN :: + * The variation axis should not be exposed to user interfaces. + * + * @since: + * 2.8.1 + */ +#define FT_VAR_AXIS_FLAG_HIDDEN 1 + + + /************************************************************************** + * + * @function: + * FT_Get_Var_Axis_Flags + * + * @description: + * Get the 'flags' field of an OpenType Variation Axis Record. + * + * Not meaningful for Adobe MM fonts (`*flags` is always zero). + * + * @input: + * master :: + * The variation descriptor. + * + * axis_index :: + * The index of the requested variation axis. + * + * @output: + * flags :: + * The 'flags' field. See @FT_VAR_AXIS_FLAG_XXX for possible values. + * + * @return: + * FreeType error code. 0~means success. + * + * @since: + * 2.8.1 + */ + FT_EXPORT( FT_Error ) + FT_Get_Var_Axis_Flags( FT_MM_Var* master, + FT_UInt axis_index, + FT_UInt* flags ); + + + /************************************************************************** + * + * @function: + * FT_Set_Named_Instance + * + * @description: + * Set or change the current named instance. + * + * @input: + * face :: + * A handle to the source face. + * + * instance_index :: + * The index of the requested instance, starting with value 1. If set + * to value 0, FreeType switches to font access without a named + * instance. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * The function uses the value of `instance_index` to set bits 16-30 of + * the face's `face_index` field. It also resets any variation applied + * to the font, and the @FT_FACE_FLAG_VARIATION bit of the face's + * `face_flags` field gets reset to zero (i.e., @FT_IS_VARIATION will + * return false). + * + * For Adobe MM fonts (which don't have named instances) this function + * simply resets the current face to the default instance. + * + * @since: + * 2.9 + */ + FT_EXPORT( FT_Error ) + FT_Set_Named_Instance( FT_Face face, + FT_UInt instance_index ); + + + /************************************************************************** + * + * @function: + * FT_Get_Default_Named_Instance + * + * @description: + * Retrieve the index of the default named instance, to be used with + * @FT_Set_Named_Instance. + * + * The default instance of a variation font is that instance for which + * the nth axis coordinate is equal to `axis[n].def` (as specified in the + * @FT_MM_Var structure), with~n covering all axes. + * + * FreeType synthesizes a named instance for the default instance if the + * font does not contain such an entry. + * + * @input: + * face :: + * A handle to the source face. + * + * @output: + * instance_index :: + * The index of the default named instance. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * For Adobe MM fonts (which don't have named instances) this function + * always returns zero for `instance_index`. + * + * @since: + * 2.13.1 + */ + FT_EXPORT( FT_Error ) + FT_Get_Default_Named_Instance( FT_Face face, + FT_UInt *instance_index ); + + /* */ + + +FT_END_HEADER + +#endif /* FTMM_H_ */ + + +/* END */ diff --git a/dependencies/winx64/include/freetype2/freetype/ftmodapi.h b/dependencies/winx64/include/freetype2/freetype/ftmodapi.h new file mode 100644 index 0000000..0ee7158 --- /dev/null +++ b/dependencies/winx64/include/freetype2/freetype/ftmodapi.h @@ -0,0 +1,807 @@ +/**************************************************************************** + * + * ftmodapi.h + * + * FreeType modules public interface (specification). + * + * Copyright (C) 1996-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + +#ifndef FTMODAPI_H_ +#define FTMODAPI_H_ + + +#include + +#ifdef FREETYPE_H +#error "freetype.h of FreeType 1 has been loaded!" +#error "Please fix the directory search order for header files" +#error "so that freetype.h of FreeType 2 is found first." +#endif + + +FT_BEGIN_HEADER + + + /************************************************************************** + * + * @section: + * module_management + * + * @title: + * Module Management + * + * @abstract: + * How to add, upgrade, remove, and control modules from FreeType. + * + * @description: + * The definitions below are used to manage modules within FreeType. + * Internal and external modules can be added, upgraded, and removed at + * runtime. For example, an alternative renderer or proprietary font + * driver can be registered and prioritized. Additionally, some module + * properties can also be controlled. + * + * Here is a list of existing values of the `module_name` field in the + * @FT_Module_Class structure. + * + * ``` + * autofitter + * bdf + * cff + * gxvalid + * otvalid + * pcf + * pfr + * psaux + * pshinter + * psnames + * raster1 + * sfnt + * smooth + * truetype + * type1 + * type42 + * t1cid + * winfonts + * ``` + * + * Note that the FreeType Cache sub-system is not a FreeType module. + * + * @order: + * FT_Module + * FT_Module_Constructor + * FT_Module_Destructor + * FT_Module_Requester + * FT_Module_Class + * + * FT_Add_Module + * FT_Get_Module + * FT_Remove_Module + * FT_Add_Default_Modules + * + * FT_FACE_DRIVER_NAME + * FT_Property_Set + * FT_Property_Get + * FT_Set_Default_Properties + * + * FT_New_Library + * FT_Done_Library + * FT_Reference_Library + * + * FT_Renderer + * FT_Renderer_Class + * + * FT_Get_Renderer + * FT_Set_Renderer + * + * FT_Set_Debug_Hook + * + */ + + + /* module bit flags */ +#define FT_MODULE_FONT_DRIVER 1 /* this module is a font driver */ +#define FT_MODULE_RENDERER 2 /* this module is a renderer */ +#define FT_MODULE_HINTER 4 /* this module is a glyph hinter */ +#define FT_MODULE_STYLER 8 /* this module is a styler */ + +#define FT_MODULE_DRIVER_SCALABLE 0x100 /* the driver supports */ + /* scalable fonts */ +#define FT_MODULE_DRIVER_NO_OUTLINES 0x200 /* the driver does not */ + /* support vector outlines */ +#define FT_MODULE_DRIVER_HAS_HINTER 0x400 /* the driver provides its */ + /* own hinter */ +#define FT_MODULE_DRIVER_HINTS_LIGHTLY 0x800 /* the driver's hinter */ + /* produces LIGHT hints */ + + + /* deprecated values */ +#define ft_module_font_driver FT_MODULE_FONT_DRIVER +#define ft_module_renderer FT_MODULE_RENDERER +#define ft_module_hinter FT_MODULE_HINTER +#define ft_module_styler FT_MODULE_STYLER + +#define ft_module_driver_scalable FT_MODULE_DRIVER_SCALABLE +#define ft_module_driver_no_outlines FT_MODULE_DRIVER_NO_OUTLINES +#define ft_module_driver_has_hinter FT_MODULE_DRIVER_HAS_HINTER +#define ft_module_driver_hints_lightly FT_MODULE_DRIVER_HINTS_LIGHTLY + + + typedef FT_Pointer FT_Module_Interface; + + + /************************************************************************** + * + * @functype: + * FT_Module_Constructor + * + * @description: + * A function used to initialize (not create) a new module object. + * + * @input: + * module :: + * The module to initialize. + */ + typedef FT_Error + (*FT_Module_Constructor)( FT_Module module ); + + + /************************************************************************** + * + * @functype: + * FT_Module_Destructor + * + * @description: + * A function used to finalize (not destroy) a given module object. + * + * @input: + * module :: + * The module to finalize. + */ + typedef void + (*FT_Module_Destructor)( FT_Module module ); + + + /************************************************************************** + * + * @functype: + * FT_Module_Requester + * + * @description: + * A function used to query a given module for a specific interface. + * + * @input: + * module :: + * The module to be searched. + * + * name :: + * The name of the interface in the module. + */ + typedef FT_Module_Interface + (*FT_Module_Requester)( FT_Module module, + const char* name ); + + + /************************************************************************** + * + * @struct: + * FT_Module_Class + * + * @description: + * The module class descriptor. While being a public structure necessary + * for FreeType's module bookkeeping, most of the fields are essentially + * internal, not to be used directly by an application. + * + * @fields: + * module_flags :: + * Bit flags describing the module. + * + * module_size :: + * The size of one module object/instance in bytes. + * + * module_name :: + * The name of the module. + * + * module_version :: + * The version, as a 16.16 fixed number (major.minor). + * + * module_requires :: + * The version of FreeType this module requires, as a 16.16 fixed + * number (major.minor). Starts at version 2.0, i.e., 0x20000. + * + * module_interface :: + * A typeless pointer to a structure (which varies between different + * modules) that holds the module's interface functions. This is + * essentially what `get_interface` returns. + * + * module_init :: + * The initializing function. + * + * module_done :: + * The finalizing function. + * + * get_interface :: + * The interface requesting function. + */ + typedef struct FT_Module_Class_ + { + FT_ULong module_flags; + FT_Long module_size; + const FT_String* module_name; + FT_Fixed module_version; + FT_Fixed module_requires; + + const void* module_interface; + + FT_Module_Constructor module_init; + FT_Module_Destructor module_done; + FT_Module_Requester get_interface; + + } FT_Module_Class; + + + /************************************************************************** + * + * @function: + * FT_Add_Module + * + * @description: + * Add a new module to a given library instance. + * + * @inout: + * library :: + * A handle to the library object. + * + * @input: + * clazz :: + * A pointer to class descriptor for the module. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * An error will be returned if a module already exists by that name, or + * if the module requires a version of FreeType that is too great. + */ + FT_EXPORT( FT_Error ) + FT_Add_Module( FT_Library library, + const FT_Module_Class* clazz ); + + + /************************************************************************** + * + * @function: + * FT_Get_Module + * + * @description: + * Find a module by its name. + * + * @input: + * library :: + * A handle to the library object. + * + * module_name :: + * The module's name (as an ASCII string). + * + * @return: + * A module handle. 0~if none was found. + * + * @note: + * FreeType's internal modules aren't documented very well, and you + * should look up the source code for details. + */ + FT_EXPORT( FT_Module ) + FT_Get_Module( FT_Library library, + const char* module_name ); + + + /************************************************************************** + * + * @function: + * FT_Remove_Module + * + * @description: + * Remove a given module from a library instance. + * + * @inout: + * library :: + * A handle to a library object. + * + * @input: + * module :: + * A handle to a module object. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * The module object is destroyed by the function in case of success. + */ + FT_EXPORT( FT_Error ) + FT_Remove_Module( FT_Library library, + FT_Module module ); + + + /************************************************************************** + * + * @macro: + * FT_FACE_DRIVER_NAME + * + * @description: + * A macro that retrieves the name of a font driver from a face object. + * + * @note: + * The font driver name is a valid `module_name` for @FT_Property_Set + * and @FT_Property_Get. This is not the same as @FT_Get_Font_Format. + * + * @since: + * 2.11 + * + */ +#define FT_FACE_DRIVER_NAME( face ) \ + ( ( *FT_REINTERPRET_CAST( FT_Module_Class**, \ + ( face )->driver ) )->module_name ) + + + /************************************************************************** + * + * @function: + * FT_Property_Set + * + * @description: + * Set a property for a given module. + * + * @input: + * library :: + * A handle to the library the module is part of. + * + * module_name :: + * The module name. + * + * property_name :: + * The property name. Properties are described in section + * @properties. + * + * Note that only a few modules have properties. + * + * value :: + * A generic pointer to a variable or structure that gives the new + * value of the property. The exact definition of `value` is + * dependent on the property; see section @properties. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * If `module_name` isn't a valid module name, or `property_name` + * doesn't specify a valid property, or if `value` doesn't represent a + * valid value for the given property, an error is returned. + * + * The following example sets property 'bar' (a simple integer) in + * module 'foo' to value~1. + * + * ``` + * FT_UInt bar; + * + * + * bar = 1; + * FT_Property_Set( library, "foo", "bar", &bar ); + * ``` + * + * Note that the FreeType Cache sub-system doesn't recognize module + * property changes. To avoid glyph lookup confusion within the cache + * you should call @FTC_Manager_Reset to completely flush the cache if a + * module property gets changed after @FTC_Manager_New has been called. + * + * It is not possible to set properties of the FreeType Cache sub-system + * itself with FT_Property_Set; use @FTC_Property_Set instead. + * + * @since: + * 2.4.11 + * + */ + FT_EXPORT( FT_Error ) + FT_Property_Set( FT_Library library, + const FT_String* module_name, + const FT_String* property_name, + const void* value ); + + + /************************************************************************** + * + * @function: + * FT_Property_Get + * + * @description: + * Get a module's property value. + * + * @input: + * library :: + * A handle to the library the module is part of. + * + * module_name :: + * The module name. + * + * property_name :: + * The property name. Properties are described in section + * @properties. + * + * @inout: + * value :: + * A generic pointer to a variable or structure that gives the value + * of the property. The exact definition of `value` is dependent on + * the property; see section @properties. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * If `module_name` isn't a valid module name, or `property_name` + * doesn't specify a valid property, or if `value` doesn't represent a + * valid value for the given property, an error is returned. + * + * The following example gets property 'baz' (a range) in module 'foo'. + * + * ``` + * typedef range_ + * { + * FT_Int32 min; + * FT_Int32 max; + * + * } range; + * + * range baz; + * + * + * FT_Property_Get( library, "foo", "baz", &baz ); + * ``` + * + * It is not possible to retrieve properties of the FreeType Cache + * sub-system with FT_Property_Get; use @FTC_Property_Get instead. + * + * @since: + * 2.4.11 + * + */ + FT_EXPORT( FT_Error ) + FT_Property_Get( FT_Library library, + const FT_String* module_name, + const FT_String* property_name, + void* value ); + + + /************************************************************************** + * + * @function: + * FT_Set_Default_Properties + * + * @description: + * If compilation option `FT_CONFIG_OPTION_ENVIRONMENT_PROPERTIES` is + * set, this function reads the `FREETYPE_PROPERTIES` environment + * variable to control driver properties. See section @properties for + * more. + * + * If the compilation option is not set, this function does nothing. + * + * `FREETYPE_PROPERTIES` has the following syntax form (broken here into + * multiple lines for better readability). + * + * ``` + * + * ':' + * '=' + * + * ':' + * '=' + * ... + * ``` + * + * Example: + * + * ``` + * FREETYPE_PROPERTIES=truetype:interpreter-version=35 \ + * cff:no-stem-darkening=0 + * ``` + * + * @inout: + * library :: + * A handle to a new library object. + * + * @since: + * 2.8 + */ + FT_EXPORT( void ) + FT_Set_Default_Properties( FT_Library library ); + + + /************************************************************************** + * + * @function: + * FT_Reference_Library + * + * @description: + * A counter gets initialized to~1 at the time an @FT_Library structure + * is created. This function increments the counter. @FT_Done_Library + * then only destroys a library if the counter is~1, otherwise it simply + * decrements the counter. + * + * This function helps in managing life-cycles of structures that + * reference @FT_Library objects. + * + * @input: + * library :: + * A handle to a target library object. + * + * @return: + * FreeType error code. 0~means success. + * + * @since: + * 2.4.2 + */ + FT_EXPORT( FT_Error ) + FT_Reference_Library( FT_Library library ); + + + /************************************************************************** + * + * @function: + * FT_New_Library + * + * @description: + * This function is used to create a new FreeType library instance from a + * given memory object. It is thus possible to use libraries with + * distinct memory allocators within the same program. Note, however, + * that the used @FT_Memory structure is expected to remain valid for the + * life of the @FT_Library object. + * + * Normally, you would call this function (followed by a call to + * @FT_Add_Default_Modules or a series of calls to @FT_Add_Module, and a + * call to @FT_Set_Default_Properties) instead of @FT_Init_FreeType to + * initialize the FreeType library. + * + * Don't use @FT_Done_FreeType but @FT_Done_Library to destroy a library + * instance. + * + * @input: + * memory :: + * A handle to the original memory object. + * + * @output: + * alibrary :: + * A pointer to handle of a new library object. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * See the discussion of reference counters in the description of + * @FT_Reference_Library. + */ + FT_EXPORT( FT_Error ) + FT_New_Library( FT_Memory memory, + FT_Library *alibrary ); + + + /************************************************************************** + * + * @function: + * FT_Done_Library + * + * @description: + * Discard a given library object. This closes all drivers and discards + * all resource objects. + * + * @input: + * library :: + * A handle to the target library. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * See the discussion of reference counters in the description of + * @FT_Reference_Library. + */ + FT_EXPORT( FT_Error ) + FT_Done_Library( FT_Library library ); + + + /************************************************************************** + * + * @functype: + * FT_DebugHook_Func + * + * @description: + * A drop-in replacement (or rather a wrapper) for the bytecode or + * charstring interpreter's main loop function. + * + * Its job is essentially + * + * - to activate debug mode to enforce single-stepping, + * + * - to call the main loop function to interpret the next opcode, and + * + * - to show the changed context to the user. + * + * An example for such a main loop function is `TT_RunIns` (declared in + * FreeType's internal header file `src/truetype/ttinterp.h`). + * + * Have a look at the source code of the `ttdebug` FreeType demo program + * for an example of a drop-in replacement. + * + * @inout: + * arg :: + * A typeless pointer, to be cast to the main loop function's data + * structure (which depends on the font module). For TrueType fonts + * it is bytecode interpreter's execution context, `TT_ExecContext`, + * which is declared in FreeType's internal header file `tttypes.h`. + */ + typedef FT_Error + (*FT_DebugHook_Func)( void* arg ); + + + /************************************************************************** + * + * @enum: + * FT_DEBUG_HOOK_XXX + * + * @description: + * A list of named debug hook indices. + * + * @values: + * FT_DEBUG_HOOK_TRUETYPE:: + * This hook index identifies the TrueType bytecode debugger. + */ +#define FT_DEBUG_HOOK_TRUETYPE 0 + + + /************************************************************************** + * + * @function: + * FT_Set_Debug_Hook + * + * @description: + * Set a debug hook function for debugging the interpreter of a font + * format. + * + * While this is a public API function, an application needs access to + * FreeType's internal header files to do something useful. + * + * Have a look at the source code of the `ttdebug` FreeType demo program + * for an example of its usage. + * + * @inout: + * library :: + * A handle to the library object. + * + * @input: + * hook_index :: + * The index of the debug hook. You should use defined enumeration + * macros like @FT_DEBUG_HOOK_TRUETYPE. + * + * debug_hook :: + * The function used to debug the interpreter. + * + * @note: + * Currently, four debug hook slots are available, but only one (for the + * TrueType interpreter) is defined. + */ + FT_EXPORT( void ) + FT_Set_Debug_Hook( FT_Library library, + FT_UInt hook_index, + FT_DebugHook_Func debug_hook ); + + + /************************************************************************** + * + * @function: + * FT_Add_Default_Modules + * + * @description: + * Add the set of default drivers to a given library object. This is + * only useful when you create a library object with @FT_New_Library + * (usually to plug a custom memory manager). + * + * @inout: + * library :: + * A handle to a new library object. + */ + FT_EXPORT( void ) + FT_Add_Default_Modules( FT_Library library ); + + + + /************************************************************************** + * + * @section: + * truetype_engine + * + * @title: + * The TrueType Engine + * + * @abstract: + * TrueType bytecode support. + * + * @description: + * This section contains a function used to query the level of TrueType + * bytecode support compiled in this version of the library. + * + */ + + + /************************************************************************** + * + * @enum: + * FT_TrueTypeEngineType + * + * @description: + * A list of values describing which kind of TrueType bytecode engine is + * implemented in a given FT_Library instance. It is used by the + * @FT_Get_TrueType_Engine_Type function. + * + * @values: + * FT_TRUETYPE_ENGINE_TYPE_NONE :: + * The library doesn't implement any kind of bytecode interpreter. + * + * FT_TRUETYPE_ENGINE_TYPE_UNPATENTED :: + * Deprecated and removed. + * + * FT_TRUETYPE_ENGINE_TYPE_PATENTED :: + * The library implements a bytecode interpreter that covers the full + * instruction set of the TrueType virtual machine (this was governed + * by patents until May 2010, hence the name). + * + * @since: + * 2.2 + * + */ + typedef enum FT_TrueTypeEngineType_ + { + FT_TRUETYPE_ENGINE_TYPE_NONE = 0, + FT_TRUETYPE_ENGINE_TYPE_UNPATENTED, + FT_TRUETYPE_ENGINE_TYPE_PATENTED + + } FT_TrueTypeEngineType; + + + /************************************************************************** + * + * @function: + * FT_Get_TrueType_Engine_Type + * + * @description: + * Return an @FT_TrueTypeEngineType value to indicate which level of the + * TrueType virtual machine a given library instance supports. + * + * @input: + * library :: + * A library instance. + * + * @return: + * A value indicating which level is supported. + * + * @since: + * 2.2 + * + */ + FT_EXPORT( FT_TrueTypeEngineType ) + FT_Get_TrueType_Engine_Type( FT_Library library ); + + /* */ + + +FT_END_HEADER + +#endif /* FTMODAPI_H_ */ + + +/* END */ diff --git a/dependencies/winx64/include/freetype2/freetype/ftmoderr.h b/dependencies/winx64/include/freetype2/freetype/ftmoderr.h new file mode 100644 index 0000000..6722fbf --- /dev/null +++ b/dependencies/winx64/include/freetype2/freetype/ftmoderr.h @@ -0,0 +1,204 @@ +/**************************************************************************** + * + * ftmoderr.h + * + * FreeType module error offsets (specification). + * + * Copyright (C) 2001-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + + /************************************************************************** + * + * This file is used to define the FreeType module error codes. + * + * If the macro `FT_CONFIG_OPTION_USE_MODULE_ERRORS` in `ftoption.h` is + * set, the lower byte of an error value identifies the error code as + * usual. In addition, the higher byte identifies the module. For + * example, the error `FT_Err_Invalid_File_Format` has value 0x0003, the + * error `TT_Err_Invalid_File_Format` has value 0x1303, the error + * `T1_Err_Invalid_File_Format` has value 0x1403, etc. + * + * Note that `FT_Err_Ok`, `TT_Err_Ok`, etc. are always equal to zero, + * including the high byte. + * + * If `FT_CONFIG_OPTION_USE_MODULE_ERRORS` isn't set, the higher byte of an + * error value is set to zero. + * + * To hide the various `XXX_Err_` prefixes in the source code, FreeType + * provides some macros in `fttypes.h`. + * + * FT_ERR( err ) + * + * Add current error module prefix (as defined with the `FT_ERR_PREFIX` + * macro) to `err`. For example, in the BDF module the line + * + * ``` + * error = FT_ERR( Invalid_Outline ); + * ``` + * + * expands to + * + * ``` + * error = BDF_Err_Invalid_Outline; + * ``` + * + * For simplicity, you can always use `FT_Err_Ok` directly instead of + * `FT_ERR( Ok )`. + * + * FT_ERR_EQ( errcode, err ) + * FT_ERR_NEQ( errcode, err ) + * + * Compare error code `errcode` with the error `err` for equality and + * inequality, respectively. Example: + * + * ``` + * if ( FT_ERR_EQ( error, Invalid_Outline ) ) + * ... + * ``` + * + * Using this macro you don't have to think about error prefixes. Of + * course, if module errors are not active, the above example is the + * same as + * + * ``` + * if ( error == FT_Err_Invalid_Outline ) + * ... + * ``` + * + * FT_ERROR_BASE( errcode ) + * FT_ERROR_MODULE( errcode ) + * + * Get base error and module error code, respectively. + * + * It can also be used to create a module error message table easily with + * something like + * + * ``` + * #undef FTMODERR_H_ + * #define FT_MODERRDEF( e, v, s ) { FT_Mod_Err_ ## e, s }, + * #define FT_MODERR_START_LIST { + * #define FT_MODERR_END_LIST { 0, 0 } }; + * + * const struct + * { + * int mod_err_offset; + * const char* mod_err_msg + * } ft_mod_errors[] = + * + * #include + * ``` + * + */ + + +#ifndef FTMODERR_H_ +#define FTMODERR_H_ + + + /*******************************************************************/ + /*******************************************************************/ + /***** *****/ + /***** SETUP MACROS *****/ + /***** *****/ + /*******************************************************************/ + /*******************************************************************/ + + +#undef FT_NEED_EXTERN_C + +#ifndef FT_MODERRDEF + +#ifdef FT_CONFIG_OPTION_USE_MODULE_ERRORS +#define FT_MODERRDEF( e, v, s ) FT_Mod_Err_ ## e = v, +#else +#define FT_MODERRDEF( e, v, s ) FT_Mod_Err_ ## e = 0, +#endif + +#define FT_MODERR_START_LIST enum { +#define FT_MODERR_END_LIST FT_Mod_Err_Max }; + +#ifdef __cplusplus +#define FT_NEED_EXTERN_C + extern "C" { +#endif + +#endif /* !FT_MODERRDEF */ + + + /*******************************************************************/ + /*******************************************************************/ + /***** *****/ + /***** LIST MODULE ERROR BASES *****/ + /***** *****/ + /*******************************************************************/ + /*******************************************************************/ + + +#ifdef FT_MODERR_START_LIST + FT_MODERR_START_LIST +#endif + + + FT_MODERRDEF( Base, 0x000, "base module" ) + FT_MODERRDEF( Autofit, 0x100, "autofitter module" ) + FT_MODERRDEF( BDF, 0x200, "BDF module" ) + FT_MODERRDEF( Bzip2, 0x300, "Bzip2 module" ) + FT_MODERRDEF( Cache, 0x400, "cache module" ) + FT_MODERRDEF( CFF, 0x500, "CFF module" ) + FT_MODERRDEF( CID, 0x600, "CID module" ) + FT_MODERRDEF( Gzip, 0x700, "Gzip module" ) + FT_MODERRDEF( LZW, 0x800, "LZW module" ) + FT_MODERRDEF( OTvalid, 0x900, "OpenType validation module" ) + FT_MODERRDEF( PCF, 0xA00, "PCF module" ) + FT_MODERRDEF( PFR, 0xB00, "PFR module" ) + FT_MODERRDEF( PSaux, 0xC00, "PS auxiliary module" ) + FT_MODERRDEF( PShinter, 0xD00, "PS hinter module" ) + FT_MODERRDEF( PSnames, 0xE00, "PS names module" ) + FT_MODERRDEF( Raster, 0xF00, "raster module" ) + FT_MODERRDEF( SFNT, 0x1000, "SFNT module" ) + FT_MODERRDEF( Smooth, 0x1100, "smooth raster module" ) + FT_MODERRDEF( TrueType, 0x1200, "TrueType module" ) + FT_MODERRDEF( Type1, 0x1300, "Type 1 module" ) + FT_MODERRDEF( Type42, 0x1400, "Type 42 module" ) + FT_MODERRDEF( Winfonts, 0x1500, "Windows FON/FNT module" ) + FT_MODERRDEF( GXvalid, 0x1600, "GX validation module" ) + FT_MODERRDEF( Sdf, 0x1700, "Signed distance field raster module" ) + + +#ifdef FT_MODERR_END_LIST + FT_MODERR_END_LIST +#endif + + + /*******************************************************************/ + /*******************************************************************/ + /***** *****/ + /***** CLEANUP *****/ + /***** *****/ + /*******************************************************************/ + /*******************************************************************/ + + +#ifdef FT_NEED_EXTERN_C + } +#endif + +#undef FT_MODERR_START_LIST +#undef FT_MODERR_END_LIST +#undef FT_MODERRDEF +#undef FT_NEED_EXTERN_C + + +#endif /* FTMODERR_H_ */ + + +/* END */ diff --git a/dependencies/winx64/include/freetype2/freetype/ftotval.h b/dependencies/winx64/include/freetype2/freetype/ftotval.h new file mode 100644 index 0000000..810200b --- /dev/null +++ b/dependencies/winx64/include/freetype2/freetype/ftotval.h @@ -0,0 +1,206 @@ +/**************************************************************************** + * + * ftotval.h + * + * FreeType API for validating OpenType tables (specification). + * + * Copyright (C) 2004-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + +/**************************************************************************** + * + * + * Warning: This module might be moved to a different library in the + * future to avoid a tight dependency between FreeType and the + * OpenType specification. + * + * + */ + + +#ifndef FTOTVAL_H_ +#define FTOTVAL_H_ + +#include + +#ifdef FREETYPE_H +#error "freetype.h of FreeType 1 has been loaded!" +#error "Please fix the directory search order for header files" +#error "so that freetype.h of FreeType 2 is found first." +#endif + + +FT_BEGIN_HEADER + + + /************************************************************************** + * + * @section: + * ot_validation + * + * @title: + * OpenType Validation + * + * @abstract: + * An API to validate OpenType tables. + * + * @description: + * This section contains the declaration of functions to validate some + * OpenType tables (BASE, GDEF, GPOS, GSUB, JSTF, MATH). + * + * @order: + * FT_OpenType_Validate + * FT_OpenType_Free + * + * FT_VALIDATE_OTXXX + * + */ + + + /************************************************************************** + * + * @enum: + * FT_VALIDATE_OTXXX + * + * @description: + * A list of bit-field constants used with @FT_OpenType_Validate to + * indicate which OpenType tables should be validated. + * + * @values: + * FT_VALIDATE_BASE :: + * Validate BASE table. + * + * FT_VALIDATE_GDEF :: + * Validate GDEF table. + * + * FT_VALIDATE_GPOS :: + * Validate GPOS table. + * + * FT_VALIDATE_GSUB :: + * Validate GSUB table. + * + * FT_VALIDATE_JSTF :: + * Validate JSTF table. + * + * FT_VALIDATE_MATH :: + * Validate MATH table. + * + * FT_VALIDATE_OT :: + * Validate all OpenType tables (BASE, GDEF, GPOS, GSUB, JSTF, MATH). + * + */ +#define FT_VALIDATE_BASE 0x0100 +#define FT_VALIDATE_GDEF 0x0200 +#define FT_VALIDATE_GPOS 0x0400 +#define FT_VALIDATE_GSUB 0x0800 +#define FT_VALIDATE_JSTF 0x1000 +#define FT_VALIDATE_MATH 0x2000 + +#define FT_VALIDATE_OT ( FT_VALIDATE_BASE | \ + FT_VALIDATE_GDEF | \ + FT_VALIDATE_GPOS | \ + FT_VALIDATE_GSUB | \ + FT_VALIDATE_JSTF | \ + FT_VALIDATE_MATH ) + + + /************************************************************************** + * + * @function: + * FT_OpenType_Validate + * + * @description: + * Validate various OpenType tables to assure that all offsets and + * indices are valid. The idea is that a higher-level library that + * actually does the text layout can access those tables without error + * checking (which can be quite time consuming). + * + * @input: + * face :: + * A handle to the input face. + * + * validation_flags :: + * A bit field that specifies the tables to be validated. See + * @FT_VALIDATE_OTXXX for possible values. + * + * @output: + * BASE_table :: + * A pointer to the BASE table. + * + * GDEF_table :: + * A pointer to the GDEF table. + * + * GPOS_table :: + * A pointer to the GPOS table. + * + * GSUB_table :: + * A pointer to the GSUB table. + * + * JSTF_table :: + * A pointer to the JSTF table. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * This function only works with OpenType fonts, returning an error + * otherwise. + * + * After use, the application should deallocate the five tables with + * @FT_OpenType_Free. A `NULL` value indicates that the table either + * doesn't exist in the font, or the application hasn't asked for + * validation. + */ + FT_EXPORT( FT_Error ) + FT_OpenType_Validate( FT_Face face, + FT_UInt validation_flags, + FT_Bytes *BASE_table, + FT_Bytes *GDEF_table, + FT_Bytes *GPOS_table, + FT_Bytes *GSUB_table, + FT_Bytes *JSTF_table ); + + + /************************************************************************** + * + * @function: + * FT_OpenType_Free + * + * @description: + * Free the buffer allocated by OpenType validator. + * + * @input: + * face :: + * A handle to the input face. + * + * table :: + * The pointer to the buffer that is allocated by + * @FT_OpenType_Validate. + * + * @note: + * This function must be used to free the buffer allocated by + * @FT_OpenType_Validate only. + */ + FT_EXPORT( void ) + FT_OpenType_Free( FT_Face face, + FT_Bytes table ); + + + /* */ + + +FT_END_HEADER + +#endif /* FTOTVAL_H_ */ + + +/* END */ diff --git a/dependencies/winx64/include/freetype2/freetype/ftoutln.h b/dependencies/winx64/include/freetype2/freetype/ftoutln.h new file mode 100644 index 0000000..44e94b4 --- /dev/null +++ b/dependencies/winx64/include/freetype2/freetype/ftoutln.h @@ -0,0 +1,588 @@ +/**************************************************************************** + * + * ftoutln.h + * + * Support for the FT_Outline type used to store glyph shapes of + * most scalable font formats (specification). + * + * Copyright (C) 1996-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + +#ifndef FTOUTLN_H_ +#define FTOUTLN_H_ + + +#include + +#ifdef FREETYPE_H +#error "freetype.h of FreeType 1 has been loaded!" +#error "Please fix the directory search order for header files" +#error "so that freetype.h of FreeType 2 is found first." +#endif + + +FT_BEGIN_HEADER + + + /************************************************************************** + * + * @section: + * outline_processing + * + * @title: + * Outline Processing + * + * @abstract: + * Functions to create, transform, and render vectorial glyph images. + * + * @description: + * This section contains routines used to create and destroy scalable + * glyph images known as 'outlines'. These can also be measured, + * transformed, and converted into bitmaps and pixmaps. + * + * @order: + * FT_Outline + * FT_Outline_New + * FT_Outline_Done + * FT_Outline_Copy + * FT_Outline_Translate + * FT_Outline_Transform + * FT_Outline_Embolden + * FT_Outline_EmboldenXY + * FT_Outline_Reverse + * FT_Outline_Check + * + * FT_Outline_Get_CBox + * FT_Outline_Get_BBox + * + * FT_Outline_Get_Bitmap + * FT_Outline_Render + * FT_Outline_Decompose + * FT_Outline_Funcs + * FT_Outline_MoveToFunc + * FT_Outline_LineToFunc + * FT_Outline_ConicToFunc + * FT_Outline_CubicToFunc + * + * FT_Orientation + * FT_Outline_Get_Orientation + * + * FT_OUTLINE_XXX + * + */ + + + /************************************************************************** + * + * @function: + * FT_Outline_Decompose + * + * @description: + * Walk over an outline's structure to decompose it into individual + * segments and Bezier arcs. This function also emits 'move to' + * operations to indicate the start of new contours in the outline. + * + * @input: + * outline :: + * A pointer to the source target. + * + * func_interface :: + * A table of 'emitters', i.e., function pointers called during + * decomposition to indicate path operations. + * + * @inout: + * user :: + * A typeless pointer that is passed to each emitter during the + * decomposition. It can be used to store the state during the + * decomposition. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * Degenerate contours, segments, and Bezier arcs may be reported. In + * most cases, it is best to filter these out before using the outline + * for stroking or other path modification purposes (which may cause + * degenerate segments to become non-degenerate and visible, like when + * stroke caps are used or the path is otherwise outset). Some glyph + * outlines may contain deliberate degenerate single points for mark + * attachement. + * + * Similarly, the function returns success for an empty outline also + * (doing nothing, that is, not calling any emitter); if necessary, you + * should filter this out, too. + */ + FT_EXPORT( FT_Error ) + FT_Outline_Decompose( FT_Outline* outline, + const FT_Outline_Funcs* func_interface, + void* user ); + + + /************************************************************************** + * + * @function: + * FT_Outline_New + * + * @description: + * Create a new outline of a given size. + * + * @input: + * library :: + * A handle to the library object from where the outline is allocated. + * Note however that the new outline will **not** necessarily be + * **freed**, when destroying the library, by @FT_Done_FreeType. + * + * numPoints :: + * The maximum number of points within the outline. Must be smaller + * than or equal to 0xFFFF (65535). + * + * numContours :: + * The maximum number of contours within the outline. This value must + * be in the range 0 to `numPoints`. + * + * @output: + * anoutline :: + * A handle to the new outline. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * The reason why this function takes a `library` parameter is simply to + * use the library's memory allocator. + */ + FT_EXPORT( FT_Error ) + FT_Outline_New( FT_Library library, + FT_UInt numPoints, + FT_Int numContours, + FT_Outline *anoutline ); + + + /************************************************************************** + * + * @function: + * FT_Outline_Done + * + * @description: + * Destroy an outline created with @FT_Outline_New. + * + * @input: + * library :: + * A handle of the library object used to allocate the outline. + * + * outline :: + * A pointer to the outline object to be discarded. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * If the outline's 'owner' field is not set, only the outline descriptor + * will be released. + */ + FT_EXPORT( FT_Error ) + FT_Outline_Done( FT_Library library, + FT_Outline* outline ); + + + /************************************************************************** + * + * @function: + * FT_Outline_Check + * + * @description: + * Check the contents of an outline descriptor. + * + * @input: + * outline :: + * A handle to a source outline. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * An empty outline, or an outline with a single point only is also + * valid. + */ + FT_EXPORT( FT_Error ) + FT_Outline_Check( FT_Outline* outline ); + + + /************************************************************************** + * + * @function: + * FT_Outline_Get_CBox + * + * @description: + * Return an outline's 'control box'. The control box encloses all the + * outline's points, including Bezier control points. Though it + * coincides with the exact bounding box for most glyphs, it can be + * slightly larger in some situations (like when rotating an outline that + * contains Bezier outside arcs). + * + * Computing the control box is very fast, while getting the bounding box + * can take much more time as it needs to walk over all segments and arcs + * in the outline. To get the latter, you can use the 'ftbbox' + * component, which is dedicated to this single task. + * + * @input: + * outline :: + * A pointer to the source outline descriptor. + * + * @output: + * acbox :: + * The outline's control box. + * + * @note: + * See @FT_Glyph_Get_CBox for a discussion of tricky fonts. + */ + FT_EXPORT( void ) + FT_Outline_Get_CBox( const FT_Outline* outline, + FT_BBox *acbox ); + + + /************************************************************************** + * + * @function: + * FT_Outline_Translate + * + * @description: + * Apply a simple translation to the points of an outline. + * + * @inout: + * outline :: + * A pointer to the target outline descriptor. + * + * @input: + * xOffset :: + * The horizontal offset. + * + * yOffset :: + * The vertical offset. + */ + FT_EXPORT( void ) + FT_Outline_Translate( const FT_Outline* outline, + FT_Pos xOffset, + FT_Pos yOffset ); + + + /************************************************************************** + * + * @function: + * FT_Outline_Copy + * + * @description: + * Copy an outline into another one. Both objects must have the same + * sizes (number of points & number of contours) when this function is + * called. + * + * @input: + * source :: + * A handle to the source outline. + * + * @output: + * target :: + * A handle to the target outline. + * + * @return: + * FreeType error code. 0~means success. + */ + FT_EXPORT( FT_Error ) + FT_Outline_Copy( const FT_Outline* source, + FT_Outline *target ); + + + /************************************************************************** + * + * @function: + * FT_Outline_Transform + * + * @description: + * Apply a simple 2x2 matrix to all of an outline's points. Useful for + * applying rotations, slanting, flipping, etc. + * + * @inout: + * outline :: + * A pointer to the target outline descriptor. + * + * @input: + * matrix :: + * A pointer to the transformation matrix. + * + * @note: + * You can use @FT_Outline_Translate if you need to translate the + * outline's points. + */ + FT_EXPORT( void ) + FT_Outline_Transform( const FT_Outline* outline, + const FT_Matrix* matrix ); + + + /************************************************************************** + * + * @function: + * FT_Outline_Embolden + * + * @description: + * Embolden an outline. The new outline will be at most 4~times + * `strength` pixels wider and higher. You may think of the left and + * bottom borders as unchanged. + * + * Negative `strength` values to reduce the outline thickness are + * possible also. + * + * @inout: + * outline :: + * A handle to the target outline. + * + * @input: + * strength :: + * How strong the glyph is emboldened. Expressed in 26.6 pixel format. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * The used algorithm to increase or decrease the thickness of the glyph + * doesn't change the number of points; this means that certain + * situations like acute angles or intersections are sometimes handled + * incorrectly. + * + * If you need 'better' metrics values you should call + * @FT_Outline_Get_CBox or @FT_Outline_Get_BBox. + * + * To get meaningful results, font scaling values must be set with + * functions like @FT_Set_Char_Size before calling FT_Render_Glyph. + * + * @example: + * ``` + * FT_Load_Glyph( face, index, FT_LOAD_DEFAULT ); + * + * if ( face->glyph->format == FT_GLYPH_FORMAT_OUTLINE ) + * FT_Outline_Embolden( &face->glyph->outline, strength ); + * ``` + * + */ + FT_EXPORT( FT_Error ) + FT_Outline_Embolden( FT_Outline* outline, + FT_Pos strength ); + + + /************************************************************************** + * + * @function: + * FT_Outline_EmboldenXY + * + * @description: + * Embolden an outline. The new outline will be `xstrength` pixels wider + * and `ystrength` pixels higher. Otherwise, it is similar to + * @FT_Outline_Embolden, which uses the same strength in both directions. + * + * @since: + * 2.4.10 + */ + FT_EXPORT( FT_Error ) + FT_Outline_EmboldenXY( FT_Outline* outline, + FT_Pos xstrength, + FT_Pos ystrength ); + + + /************************************************************************** + * + * @function: + * FT_Outline_Reverse + * + * @description: + * Reverse the drawing direction of an outline. This is used to ensure + * consistent fill conventions for mirrored glyphs. + * + * @inout: + * outline :: + * A pointer to the target outline descriptor. + * + * @note: + * This function toggles the bit flag @FT_OUTLINE_REVERSE_FILL in the + * outline's `flags` field. + * + * It shouldn't be used by a normal client application, unless it knows + * what it is doing. + */ + FT_EXPORT( void ) + FT_Outline_Reverse( FT_Outline* outline ); + + + /************************************************************************** + * + * @function: + * FT_Outline_Get_Bitmap + * + * @description: + * Render an outline within a bitmap. The outline's image is simply + * OR-ed to the target bitmap. + * + * @input: + * library :: + * A handle to a FreeType library object. + * + * outline :: + * A pointer to the source outline descriptor. + * + * @inout: + * abitmap :: + * A pointer to the target bitmap descriptor. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * This function does **not create** the bitmap, it only renders an + * outline image within the one you pass to it! Consequently, the + * various fields in `abitmap` should be set accordingly. + * + * It will use the raster corresponding to the default glyph format. + * + * The value of the `num_grays` field in `abitmap` is ignored. If you + * select the gray-level rasterizer, and you want less than 256 gray + * levels, you have to use @FT_Outline_Render directly. + */ + FT_EXPORT( FT_Error ) + FT_Outline_Get_Bitmap( FT_Library library, + FT_Outline* outline, + const FT_Bitmap *abitmap ); + + + /************************************************************************** + * + * @function: + * FT_Outline_Render + * + * @description: + * Render an outline within a bitmap using the current scan-convert. + * + * @input: + * library :: + * A handle to a FreeType library object. + * + * outline :: + * A pointer to the source outline descriptor. + * + * @inout: + * params :: + * A pointer to an @FT_Raster_Params structure used to describe the + * rendering operation. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * This advanced function uses @FT_Raster_Params as an argument. + * The field `params.source` will be set to `outline` before the scan + * converter is called, which means that the value you give to it is + * actually ignored. Either `params.target` must point to preallocated + * bitmap, or @FT_RASTER_FLAG_DIRECT must be set in `params.flags` + * allowing FreeType rasterizer to be used for direct composition, + * translucency, etc. See @FT_Raster_Params for more details. + */ + FT_EXPORT( FT_Error ) + FT_Outline_Render( FT_Library library, + FT_Outline* outline, + FT_Raster_Params* params ); + + + /************************************************************************** + * + * @enum: + * FT_Orientation + * + * @description: + * A list of values used to describe an outline's contour orientation. + * + * The TrueType and PostScript specifications use different conventions + * to determine whether outline contours should be filled or unfilled. + * + * @values: + * FT_ORIENTATION_TRUETYPE :: + * According to the TrueType specification, clockwise contours must be + * filled, and counter-clockwise ones must be unfilled. + * + * FT_ORIENTATION_POSTSCRIPT :: + * According to the PostScript specification, counter-clockwise + * contours must be filled, and clockwise ones must be unfilled. + * + * FT_ORIENTATION_FILL_RIGHT :: + * This is identical to @FT_ORIENTATION_TRUETYPE, but is used to + * remember that in TrueType, everything that is to the right of the + * drawing direction of a contour must be filled. + * + * FT_ORIENTATION_FILL_LEFT :: + * This is identical to @FT_ORIENTATION_POSTSCRIPT, but is used to + * remember that in PostScript, everything that is to the left of the + * drawing direction of a contour must be filled. + * + * FT_ORIENTATION_NONE :: + * The orientation cannot be determined. That is, different parts of + * the glyph have different orientation. + * + */ + typedef enum FT_Orientation_ + { + FT_ORIENTATION_TRUETYPE = 0, + FT_ORIENTATION_POSTSCRIPT = 1, + FT_ORIENTATION_FILL_RIGHT = FT_ORIENTATION_TRUETYPE, + FT_ORIENTATION_FILL_LEFT = FT_ORIENTATION_POSTSCRIPT, + FT_ORIENTATION_NONE + + } FT_Orientation; + + + /************************************************************************** + * + * @function: + * FT_Outline_Get_Orientation + * + * @description: + * This function analyzes a glyph outline and tries to compute its fill + * orientation (see @FT_Orientation). This is done by integrating the + * total area covered by the outline. The positive integral corresponds + * to the clockwise orientation and @FT_ORIENTATION_POSTSCRIPT is + * returned. The negative integral corresponds to the counter-clockwise + * orientation and @FT_ORIENTATION_TRUETYPE is returned. + * + * Note that this will return @FT_ORIENTATION_TRUETYPE for empty + * outlines. + * + * @input: + * outline :: + * A handle to the source outline. + * + * @return: + * The orientation. + * + */ + FT_EXPORT( FT_Orientation ) + FT_Outline_Get_Orientation( FT_Outline* outline ); + + + /* */ + + +FT_END_HEADER + +#endif /* FTOUTLN_H_ */ + + +/* END */ + + +/* Local Variables: */ +/* coding: utf-8 */ +/* End: */ diff --git a/dependencies/winx64/include/freetype2/freetype/ftparams.h b/dependencies/winx64/include/freetype2/freetype/ftparams.h new file mode 100644 index 0000000..43bf69c --- /dev/null +++ b/dependencies/winx64/include/freetype2/freetype/ftparams.h @@ -0,0 +1,218 @@ +/**************************************************************************** + * + * ftparams.h + * + * FreeType API for possible FT_Parameter tags (specification only). + * + * Copyright (C) 2017-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + +#ifndef FTPARAMS_H_ +#define FTPARAMS_H_ + +#include + +#ifdef FREETYPE_H +#error "freetype.h of FreeType 1 has been loaded!" +#error "Please fix the directory search order for header files" +#error "so that freetype.h of FreeType 2 is found first." +#endif + + +FT_BEGIN_HEADER + + + /************************************************************************** + * + * @section: + * parameter_tags + * + * @title: + * Parameter Tags + * + * @abstract: + * Macros for driver property and font loading parameter tags. + * + * @description: + * This section contains macros for the @FT_Parameter structure that are + * used with various functions to activate some special functionality or + * different behaviour of various components of FreeType. + * + */ + + + /************************************************************************** + * + * @enum: + * FT_PARAM_TAG_IGNORE_TYPOGRAPHIC_FAMILY + * + * @description: + * A tag for @FT_Parameter to make @FT_Open_Face ignore typographic + * family names in the 'name' table (introduced in OpenType version 1.4). + * Use this for backward compatibility with legacy systems that have a + * four-faces-per-family restriction. + * + * @since: + * 2.8 + * + */ +#define FT_PARAM_TAG_IGNORE_TYPOGRAPHIC_FAMILY \ + FT_MAKE_TAG( 'i', 'g', 'p', 'f' ) + + + /* this constant is deprecated */ +#define FT_PARAM_TAG_IGNORE_PREFERRED_FAMILY \ + FT_PARAM_TAG_IGNORE_TYPOGRAPHIC_FAMILY + + + /************************************************************************** + * + * @enum: + * FT_PARAM_TAG_IGNORE_TYPOGRAPHIC_SUBFAMILY + * + * @description: + * A tag for @FT_Parameter to make @FT_Open_Face ignore typographic + * subfamily names in the 'name' table (introduced in OpenType version + * 1.4). Use this for backward compatibility with legacy systems that + * have a four-faces-per-family restriction. + * + * @since: + * 2.8 + * + */ +#define FT_PARAM_TAG_IGNORE_TYPOGRAPHIC_SUBFAMILY \ + FT_MAKE_TAG( 'i', 'g', 'p', 's' ) + + + /* this constant is deprecated */ +#define FT_PARAM_TAG_IGNORE_PREFERRED_SUBFAMILY \ + FT_PARAM_TAG_IGNORE_TYPOGRAPHIC_SUBFAMILY + + + /************************************************************************** + * + * @enum: + * FT_PARAM_TAG_INCREMENTAL + * + * @description: + * An @FT_Parameter tag to be used with @FT_Open_Face to indicate + * incremental glyph loading. + * + */ +#define FT_PARAM_TAG_INCREMENTAL \ + FT_MAKE_TAG( 'i', 'n', 'c', 'r' ) + + + /************************************************************************** + * + * @enum: + * FT_PARAM_TAG_IGNORE_SBIX + * + * @description: + * A tag for @FT_Parameter to make @FT_Open_Face ignore an 'sbix' table + * while loading a font. Use this if @FT_FACE_FLAG_SBIX is set and you + * want to access the outline glyphs in the font. + * + */ +#define FT_PARAM_TAG_IGNORE_SBIX \ + FT_MAKE_TAG( 'i', 's', 'b', 'x' ) + + + /************************************************************************** + * + * @enum: + * FT_PARAM_TAG_LCD_FILTER_WEIGHTS + * + * @description: + * An @FT_Parameter tag to be used with @FT_Face_Properties. The + * corresponding argument specifies the five LCD filter weights for a + * given face (if using @FT_LOAD_TARGET_LCD, for example), overriding the + * global default values or the values set up with + * @FT_Library_SetLcdFilterWeights. + * + * @since: + * 2.8 + * + */ +#define FT_PARAM_TAG_LCD_FILTER_WEIGHTS \ + FT_MAKE_TAG( 'l', 'c', 'd', 'f' ) + + + /************************************************************************** + * + * @enum: + * FT_PARAM_TAG_RANDOM_SEED + * + * @description: + * An @FT_Parameter tag to be used with @FT_Face_Properties. The + * corresponding 32bit signed integer argument overrides the font + * driver's random seed value with a face-specific one; see @random-seed. + * + * @since: + * 2.8 + * + */ +#define FT_PARAM_TAG_RANDOM_SEED \ + FT_MAKE_TAG( 's', 'e', 'e', 'd' ) + + + /************************************************************************** + * + * @enum: + * FT_PARAM_TAG_STEM_DARKENING + * + * @description: + * An @FT_Parameter tag to be used with @FT_Face_Properties. The + * corresponding Boolean argument specifies whether to apply stem + * darkening, overriding the global default values or the values set up + * with @FT_Property_Set (see @no-stem-darkening). + * + * This is a passive setting that only takes effect if the font driver or + * autohinter honors it, which the CFF, Type~1, and CID drivers always + * do, but the autohinter only in 'light' hinting mode (as of version + * 2.9). + * + * @since: + * 2.8 + * + */ +#define FT_PARAM_TAG_STEM_DARKENING \ + FT_MAKE_TAG( 'd', 'a', 'r', 'k' ) + + + /************************************************************************** + * + * @enum: + * FT_PARAM_TAG_UNPATENTED_HINTING + * + * @description: + * Deprecated, no effect. + * + * Previously: A constant used as the tag of an @FT_Parameter structure + * to indicate that unpatented methods only should be used by the + * TrueType bytecode interpreter for a typeface opened by @FT_Open_Face. + * + */ +#define FT_PARAM_TAG_UNPATENTED_HINTING \ + FT_MAKE_TAG( 'u', 'n', 'p', 'a' ) + + + /* */ + + +FT_END_HEADER + + +#endif /* FTPARAMS_H_ */ + + +/* END */ diff --git a/dependencies/winx64/include/freetype2/freetype/ftpfr.h b/dependencies/winx64/include/freetype2/freetype/ftpfr.h new file mode 100644 index 0000000..1a712b9 --- /dev/null +++ b/dependencies/winx64/include/freetype2/freetype/ftpfr.h @@ -0,0 +1,179 @@ +/**************************************************************************** + * + * ftpfr.h + * + * FreeType API for accessing PFR-specific data (specification only). + * + * Copyright (C) 2002-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + +#ifndef FTPFR_H_ +#define FTPFR_H_ + +#include + +#ifdef FREETYPE_H +#error "freetype.h of FreeType 1 has been loaded!" +#error "Please fix the directory search order for header files" +#error "so that freetype.h of FreeType 2 is found first." +#endif + + +FT_BEGIN_HEADER + + + /************************************************************************** + * + * @section: + * pfr_fonts + * + * @title: + * PFR Fonts + * + * @abstract: + * PFR/TrueDoc-specific API. + * + * @description: + * This section contains the declaration of PFR-specific functions. + * + */ + + + /************************************************************************** + * + * @function: + * FT_Get_PFR_Metrics + * + * @description: + * Return the outline and metrics resolutions of a given PFR face. + * + * @input: + * face :: + * Handle to the input face. It can be a non-PFR face. + * + * @output: + * aoutline_resolution :: + * Outline resolution. This is equivalent to `face->units_per_EM` for + * non-PFR fonts. Optional (parameter can be `NULL`). + * + * ametrics_resolution :: + * Metrics resolution. This is equivalent to `outline_resolution` for + * non-PFR fonts. Optional (parameter can be `NULL`). + * + * ametrics_x_scale :: + * A 16.16 fixed-point number used to scale distance expressed in + * metrics units to device subpixels. This is equivalent to + * `face->size->x_scale`, but for metrics only. Optional (parameter + * can be `NULL`). + * + * ametrics_y_scale :: + * Same as `ametrics_x_scale` but for the vertical direction. + * optional (parameter can be `NULL`). + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * If the input face is not a PFR, this function will return an error. + * However, in all cases, it will return valid values. + */ + FT_EXPORT( FT_Error ) + FT_Get_PFR_Metrics( FT_Face face, + FT_UInt *aoutline_resolution, + FT_UInt *ametrics_resolution, + FT_Fixed *ametrics_x_scale, + FT_Fixed *ametrics_y_scale ); + + + /************************************************************************** + * + * @function: + * FT_Get_PFR_Kerning + * + * @description: + * Return the kerning pair corresponding to two glyphs in a PFR face. + * The distance is expressed in metrics units, unlike the result of + * @FT_Get_Kerning. + * + * @input: + * face :: + * A handle to the input face. + * + * left :: + * Index of the left glyph. + * + * right :: + * Index of the right glyph. + * + * @output: + * avector :: + * A kerning vector. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * This function always return distances in original PFR metrics units. + * This is unlike @FT_Get_Kerning with the @FT_KERNING_UNSCALED mode, + * which always returns distances converted to outline units. + * + * You can use the value of the `x_scale` and `y_scale` parameters + * returned by @FT_Get_PFR_Metrics to scale these to device subpixels. + */ + FT_EXPORT( FT_Error ) + FT_Get_PFR_Kerning( FT_Face face, + FT_UInt left, + FT_UInt right, + FT_Vector *avector ); + + + /************************************************************************** + * + * @function: + * FT_Get_PFR_Advance + * + * @description: + * Return a given glyph advance, expressed in original metrics units, + * from a PFR font. + * + * @input: + * face :: + * A handle to the input face. + * + * gindex :: + * The glyph index. + * + * @output: + * aadvance :: + * The glyph advance in metrics units. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * You can use the `x_scale` or `y_scale` results of @FT_Get_PFR_Metrics + * to convert the advance to device subpixels (i.e., 1/64 of pixels). + */ + FT_EXPORT( FT_Error ) + FT_Get_PFR_Advance( FT_Face face, + FT_UInt gindex, + FT_Pos *aadvance ); + + /* */ + + +FT_END_HEADER + +#endif /* FTPFR_H_ */ + + +/* END */ diff --git a/dependencies/winx64/include/freetype2/freetype/ftrender.h b/dependencies/winx64/include/freetype2/freetype/ftrender.h new file mode 100644 index 0000000..dc5018a --- /dev/null +++ b/dependencies/winx64/include/freetype2/freetype/ftrender.h @@ -0,0 +1,244 @@ +/**************************************************************************** + * + * ftrender.h + * + * FreeType renderer modules public interface (specification). + * + * Copyright (C) 1996-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + +#ifndef FTRENDER_H_ +#define FTRENDER_H_ + + +#include +#include + + +FT_BEGIN_HEADER + + + /************************************************************************** + * + * @section: + * module_management + * + */ + + + /* create a new glyph object */ + typedef FT_Error + (*FT_Glyph_InitFunc)( FT_Glyph glyph, + FT_GlyphSlot slot ); + + /* destroys a given glyph object */ + typedef void + (*FT_Glyph_DoneFunc)( FT_Glyph glyph ); + + typedef void + (*FT_Glyph_TransformFunc)( FT_Glyph glyph, + const FT_Matrix* matrix, + const FT_Vector* delta ); + + typedef void + (*FT_Glyph_GetBBoxFunc)( FT_Glyph glyph, + FT_BBox* abbox ); + + typedef FT_Error + (*FT_Glyph_CopyFunc)( FT_Glyph source, + FT_Glyph target ); + + typedef FT_Error + (*FT_Glyph_PrepareFunc)( FT_Glyph glyph, + FT_GlyphSlot slot ); + +/* deprecated */ +#define FT_Glyph_Init_Func FT_Glyph_InitFunc +#define FT_Glyph_Done_Func FT_Glyph_DoneFunc +#define FT_Glyph_Transform_Func FT_Glyph_TransformFunc +#define FT_Glyph_BBox_Func FT_Glyph_GetBBoxFunc +#define FT_Glyph_Copy_Func FT_Glyph_CopyFunc +#define FT_Glyph_Prepare_Func FT_Glyph_PrepareFunc + + + struct FT_Glyph_Class_ + { + FT_Long glyph_size; + FT_Glyph_Format glyph_format; + + FT_Glyph_InitFunc glyph_init; + FT_Glyph_DoneFunc glyph_done; + FT_Glyph_CopyFunc glyph_copy; + FT_Glyph_TransformFunc glyph_transform; + FT_Glyph_GetBBoxFunc glyph_bbox; + FT_Glyph_PrepareFunc glyph_prepare; + }; + + + typedef FT_Error + (*FT_Renderer_RenderFunc)( FT_Renderer renderer, + FT_GlyphSlot slot, + FT_Render_Mode mode, + const FT_Vector* origin ); + + typedef FT_Error + (*FT_Renderer_TransformFunc)( FT_Renderer renderer, + FT_GlyphSlot slot, + const FT_Matrix* matrix, + const FT_Vector* delta ); + + + typedef void + (*FT_Renderer_GetCBoxFunc)( FT_Renderer renderer, + FT_GlyphSlot slot, + FT_BBox* cbox ); + + + typedef FT_Error + (*FT_Renderer_SetModeFunc)( FT_Renderer renderer, + FT_ULong mode_tag, + FT_Pointer mode_ptr ); + +/* deprecated identifiers */ +#define FTRenderer_render FT_Renderer_RenderFunc +#define FTRenderer_transform FT_Renderer_TransformFunc +#define FTRenderer_getCBox FT_Renderer_GetCBoxFunc +#define FTRenderer_setMode FT_Renderer_SetModeFunc + + + /************************************************************************** + * + * @struct: + * FT_Renderer_Class + * + * @description: + * The renderer module class descriptor. + * + * @fields: + * root :: + * The root @FT_Module_Class fields. + * + * glyph_format :: + * The glyph image format this renderer handles. + * + * render_glyph :: + * A method used to render the image that is in a given glyph slot into + * a bitmap. + * + * transform_glyph :: + * A method used to transform the image that is in a given glyph slot. + * + * get_glyph_cbox :: + * A method used to access the glyph's cbox. + * + * set_mode :: + * A method used to pass additional parameters. + * + * raster_class :: + * For @FT_GLYPH_FORMAT_OUTLINE renderers only. This is a pointer to + * its raster's class. + */ + typedef struct FT_Renderer_Class_ + { + FT_Module_Class root; + + FT_Glyph_Format glyph_format; + + FT_Renderer_RenderFunc render_glyph; + FT_Renderer_TransformFunc transform_glyph; + FT_Renderer_GetCBoxFunc get_glyph_cbox; + FT_Renderer_SetModeFunc set_mode; + + const FT_Raster_Funcs* raster_class; + + } FT_Renderer_Class; + + + /************************************************************************** + * + * @function: + * FT_Get_Renderer + * + * @description: + * Retrieve the current renderer for a given glyph format. + * + * @input: + * library :: + * A handle to the library object. + * + * format :: + * The glyph format. + * + * @return: + * A renderer handle. 0~if none found. + * + * @note: + * An error will be returned if a module already exists by that name, or + * if the module requires a version of FreeType that is too great. + * + * To add a new renderer, simply use @FT_Add_Module. To retrieve a + * renderer by its name, use @FT_Get_Module. + */ + FT_EXPORT( FT_Renderer ) + FT_Get_Renderer( FT_Library library, + FT_Glyph_Format format ); + + + /************************************************************************** + * + * @function: + * FT_Set_Renderer + * + * @description: + * Set the current renderer to use, and set additional mode. + * + * @inout: + * library :: + * A handle to the library object. + * + * @input: + * renderer :: + * A handle to the renderer object. + * + * num_params :: + * The number of additional parameters. + * + * parameters :: + * Additional parameters. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * In case of success, the renderer will be used to convert glyph images + * in the renderer's known format into bitmaps. + * + * This doesn't change the current renderer for other formats. + * + * Currently, no FreeType renderer module uses `parameters`; you should + * thus always pass `NULL` as the value. + */ + FT_EXPORT( FT_Error ) + FT_Set_Renderer( FT_Library library, + FT_Renderer renderer, + FT_UInt num_params, + FT_Parameter* parameters ); + + /* */ + + +FT_END_HEADER + +#endif /* FTRENDER_H_ */ + + +/* END */ diff --git a/dependencies/winx64/include/freetype2/freetype/ftsizes.h b/dependencies/winx64/include/freetype2/freetype/ftsizes.h new file mode 100644 index 0000000..4ef5c79 --- /dev/null +++ b/dependencies/winx64/include/freetype2/freetype/ftsizes.h @@ -0,0 +1,159 @@ +/**************************************************************************** + * + * ftsizes.h + * + * FreeType size objects management (specification). + * + * Copyright (C) 1996-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + + /************************************************************************** + * + * Typical application would normally not need to use these functions. + * However, they have been placed in a public API for the rare cases where + * they are needed. + * + */ + + +#ifndef FTSIZES_H_ +#define FTSIZES_H_ + + +#include + +#ifdef FREETYPE_H +#error "freetype.h of FreeType 1 has been loaded!" +#error "Please fix the directory search order for header files" +#error "so that freetype.h of FreeType 2 is found first." +#endif + + +FT_BEGIN_HEADER + + + /************************************************************************** + * + * @section: + * sizes_management + * + * @title: + * Size Management + * + * @abstract: + * Managing multiple sizes per face. + * + * @description: + * When creating a new face object (e.g., with @FT_New_Face), an @FT_Size + * object is automatically created and used to store all pixel-size + * dependent information, available in the `face->size` field. + * + * It is however possible to create more sizes for a given face, mostly + * in order to manage several character pixel sizes of the same font + * family and style. See @FT_New_Size and @FT_Done_Size. + * + * Note that @FT_Set_Pixel_Sizes and @FT_Set_Char_Size only modify the + * contents of the current 'active' size; you thus need to use + * @FT_Activate_Size to change it. + * + * 99% of applications won't need the functions provided here, especially + * if they use the caching sub-system, so be cautious when using these. + * + */ + + + /************************************************************************** + * + * @function: + * FT_New_Size + * + * @description: + * Create a new size object from a given face object. + * + * @input: + * face :: + * A handle to a parent face object. + * + * @output: + * asize :: + * A handle to a new size object. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * You need to call @FT_Activate_Size in order to select the new size for + * upcoming calls to @FT_Set_Pixel_Sizes, @FT_Set_Char_Size, + * @FT_Load_Glyph, @FT_Load_Char, etc. + */ + FT_EXPORT( FT_Error ) + FT_New_Size( FT_Face face, + FT_Size* size ); + + + /************************************************************************** + * + * @function: + * FT_Done_Size + * + * @description: + * Discard a given size object. Note that @FT_Done_Face automatically + * discards all size objects allocated with @FT_New_Size. + * + * @input: + * size :: + * A handle to a target size object. + * + * @return: + * FreeType error code. 0~means success. + */ + FT_EXPORT( FT_Error ) + FT_Done_Size( FT_Size size ); + + + /************************************************************************** + * + * @function: + * FT_Activate_Size + * + * @description: + * Even though it is possible to create several size objects for a given + * face (see @FT_New_Size for details), functions like @FT_Load_Glyph or + * @FT_Load_Char only use the one that has been activated last to + * determine the 'current character pixel size'. + * + * This function can be used to 'activate' a previously created size + * object. + * + * @input: + * size :: + * A handle to a target size object. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * If `face` is the size's parent face object, this function changes the + * value of `face->size` to the input size handle. + */ + FT_EXPORT( FT_Error ) + FT_Activate_Size( FT_Size size ); + + /* */ + + +FT_END_HEADER + +#endif /* FTSIZES_H_ */ + + +/* END */ diff --git a/dependencies/winx64/include/freetype2/freetype/ftsnames.h b/dependencies/winx64/include/freetype2/freetype/ftsnames.h new file mode 100644 index 0000000..d5d5cd9 --- /dev/null +++ b/dependencies/winx64/include/freetype2/freetype/ftsnames.h @@ -0,0 +1,272 @@ +/**************************************************************************** + * + * ftsnames.h + * + * Simple interface to access SFNT 'name' tables (which are used + * to hold font names, copyright info, notices, etc.) (specification). + * + * This is _not_ used to retrieve glyph names! + * + * Copyright (C) 1996-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + +#ifndef FTSNAMES_H_ +#define FTSNAMES_H_ + + +#include +#include + +#ifdef FREETYPE_H +#error "freetype.h of FreeType 1 has been loaded!" +#error "Please fix the directory search order for header files" +#error "so that freetype.h of FreeType 2 is found first." +#endif + + +FT_BEGIN_HEADER + + + /************************************************************************** + * + * @section: + * sfnt_names + * + * @title: + * SFNT Names + * + * @abstract: + * Access the names embedded in TrueType and OpenType files. + * + * @description: + * The TrueType and OpenType specifications allow the inclusion of a + * special names table ('name') in font files. This table contains + * textual (and internationalized) information regarding the font, like + * family name, copyright, version, etc. + * + * The definitions below are used to access them if available. + * + * Note that this has nothing to do with glyph names! + * + */ + + + /************************************************************************** + * + * @struct: + * FT_SfntName + * + * @description: + * A structure used to model an SFNT 'name' table entry. + * + * @fields: + * platform_id :: + * The platform ID for `string`. See @TT_PLATFORM_XXX for possible + * values. + * + * encoding_id :: + * The encoding ID for `string`. See @TT_APPLE_ID_XXX, @TT_MAC_ID_XXX, + * @TT_ISO_ID_XXX, @TT_MS_ID_XXX, and @TT_ADOBE_ID_XXX for possible + * values. + * + * language_id :: + * The language ID for `string`. See @TT_MAC_LANGID_XXX and + * @TT_MS_LANGID_XXX for possible values. + * + * Registered OpenType values for `language_id` are always smaller than + * 0x8000; values equal or larger than 0x8000 usually indicate a + * language tag string (introduced in OpenType version 1.6). Use + * function @FT_Get_Sfnt_LangTag with `language_id` as its argument to + * retrieve the associated language tag. + * + * name_id :: + * An identifier for `string`. See @TT_NAME_ID_XXX for possible + * values. + * + * string :: + * The 'name' string. Note that its format differs depending on the + * (platform,encoding) pair, being either a string of bytes (without a + * terminating `NULL` byte) or containing UTF-16BE entities. + * + * string_len :: + * The length of `string` in bytes. + * + * @note: + * Please refer to the TrueType or OpenType specification for more + * details. + */ + typedef struct FT_SfntName_ + { + FT_UShort platform_id; + FT_UShort encoding_id; + FT_UShort language_id; + FT_UShort name_id; + + FT_Byte* string; /* this string is *not* null-terminated! */ + FT_UInt string_len; /* in bytes */ + + } FT_SfntName; + + + /************************************************************************** + * + * @function: + * FT_Get_Sfnt_Name_Count + * + * @description: + * Retrieve the number of name strings in the SFNT 'name' table. + * + * @input: + * face :: + * A handle to the source face. + * + * @return: + * The number of strings in the 'name' table. + * + * @note: + * This function always returns an error if the config macro + * `TT_CONFIG_OPTION_SFNT_NAMES` is not defined in `ftoption.h`. + */ + FT_EXPORT( FT_UInt ) + FT_Get_Sfnt_Name_Count( FT_Face face ); + + + /************************************************************************** + * + * @function: + * FT_Get_Sfnt_Name + * + * @description: + * Retrieve a string of the SFNT 'name' table for a given index. + * + * @input: + * face :: + * A handle to the source face. + * + * idx :: + * The index of the 'name' string. + * + * @output: + * aname :: + * The indexed @FT_SfntName structure. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * The `string` array returned in the `aname` structure is not + * null-terminated. Note that you don't have to deallocate `string` by + * yourself; FreeType takes care of it if you call @FT_Done_Face. + * + * Use @FT_Get_Sfnt_Name_Count to get the total number of available + * 'name' table entries, then do a loop until you get the right platform, + * encoding, and name ID. + * + * 'name' table format~1 entries can use language tags also, see + * @FT_Get_Sfnt_LangTag. + * + * This function always returns an error if the config macro + * `TT_CONFIG_OPTION_SFNT_NAMES` is not defined in `ftoption.h`. + */ + FT_EXPORT( FT_Error ) + FT_Get_Sfnt_Name( FT_Face face, + FT_UInt idx, + FT_SfntName *aname ); + + + /************************************************************************** + * + * @struct: + * FT_SfntLangTag + * + * @description: + * A structure to model a language tag entry from an SFNT 'name' table. + * + * @fields: + * string :: + * The language tag string, encoded in UTF-16BE (without trailing + * `NULL` bytes). + * + * string_len :: + * The length of `string` in **bytes**. + * + * @note: + * Please refer to the TrueType or OpenType specification for more + * details. + * + * @since: + * 2.8 + */ + typedef struct FT_SfntLangTag_ + { + FT_Byte* string; /* this string is *not* null-terminated! */ + FT_UInt string_len; /* in bytes */ + + } FT_SfntLangTag; + + + /************************************************************************** + * + * @function: + * FT_Get_Sfnt_LangTag + * + * @description: + * Retrieve the language tag associated with a language ID of an SFNT + * 'name' table entry. + * + * @input: + * face :: + * A handle to the source face. + * + * langID :: + * The language ID, as returned by @FT_Get_Sfnt_Name. This is always a + * value larger than 0x8000. + * + * @output: + * alangTag :: + * The language tag associated with the 'name' table entry's language + * ID. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * The `string` array returned in the `alangTag` structure is not + * null-terminated. Note that you don't have to deallocate `string` by + * yourself; FreeType takes care of it if you call @FT_Done_Face. + * + * Only 'name' table format~1 supports language tags. For format~0 + * tables, this function always returns FT_Err_Invalid_Table. For + * invalid format~1 language ID values, FT_Err_Invalid_Argument is + * returned. + * + * This function always returns an error if the config macro + * `TT_CONFIG_OPTION_SFNT_NAMES` is not defined in `ftoption.h`. + * + * @since: + * 2.8 + */ + FT_EXPORT( FT_Error ) + FT_Get_Sfnt_LangTag( FT_Face face, + FT_UInt langID, + FT_SfntLangTag *alangTag ); + + + /* */ + + +FT_END_HEADER + +#endif /* FTSNAMES_H_ */ + + +/* END */ diff --git a/dependencies/winx64/include/freetype2/freetype/ftstroke.h b/dependencies/winx64/include/freetype2/freetype/ftstroke.h new file mode 100644 index 0000000..41626dc --- /dev/null +++ b/dependencies/winx64/include/freetype2/freetype/ftstroke.h @@ -0,0 +1,773 @@ +/**************************************************************************** + * + * ftstroke.h + * + * FreeType path stroker (specification). + * + * Copyright (C) 2002-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + +#ifndef FTSTROKE_H_ +#define FTSTROKE_H_ + +#include +#include + + +FT_BEGIN_HEADER + + + /************************************************************************** + * + * @section: + * glyph_stroker + * + * @title: + * Glyph Stroker + * + * @abstract: + * Generating bordered and stroked glyphs. + * + * @description: + * This component generates stroked outlines of a given vectorial glyph. + * It also allows you to retrieve the 'outside' and/or the 'inside' + * borders of the stroke. + * + * This can be useful to generate 'bordered' glyph, i.e., glyphs + * displayed with a colored (and anti-aliased) border around their + * shape. + * + * @order: + * FT_Stroker + * + * FT_Stroker_LineJoin + * FT_Stroker_LineCap + * FT_StrokerBorder + * + * FT_Outline_GetInsideBorder + * FT_Outline_GetOutsideBorder + * + * FT_Glyph_Stroke + * FT_Glyph_StrokeBorder + * + * FT_Stroker_New + * FT_Stroker_Set + * FT_Stroker_Rewind + * FT_Stroker_ParseOutline + * FT_Stroker_Done + * + * FT_Stroker_BeginSubPath + * FT_Stroker_EndSubPath + * + * FT_Stroker_LineTo + * FT_Stroker_ConicTo + * FT_Stroker_CubicTo + * + * FT_Stroker_GetBorderCounts + * FT_Stroker_ExportBorder + * FT_Stroker_GetCounts + * FT_Stroker_Export + * + */ + + + /************************************************************************** + * + * @type: + * FT_Stroker + * + * @description: + * Opaque handle to a path stroker object. + */ + typedef struct FT_StrokerRec_* FT_Stroker; + + + /************************************************************************** + * + * @enum: + * FT_Stroker_LineJoin + * + * @description: + * These values determine how two joining lines are rendered in a + * stroker. + * + * @values: + * FT_STROKER_LINEJOIN_ROUND :: + * Used to render rounded line joins. Circular arcs are used to join + * two lines smoothly. + * + * FT_STROKER_LINEJOIN_BEVEL :: + * Used to render beveled line joins. The outer corner of the joined + * lines is filled by enclosing the triangular region of the corner + * with a straight line between the outer corners of each stroke. + * + * FT_STROKER_LINEJOIN_MITER_FIXED :: + * Used to render mitered line joins, with fixed bevels if the miter + * limit is exceeded. The outer edges of the strokes for the two + * segments are extended until they meet at an angle. A bevel join + * (see above) is used if the segments meet at too sharp an angle and + * the outer edges meet beyond a distance corresponding to the meter + * limit. This prevents long spikes being created. + * `FT_STROKER_LINEJOIN_MITER_FIXED` generates a miter line join as + * used in PostScript and PDF. + * + * FT_STROKER_LINEJOIN_MITER_VARIABLE :: + * FT_STROKER_LINEJOIN_MITER :: + * Used to render mitered line joins, with variable bevels if the miter + * limit is exceeded. The intersection of the strokes is clipped + * perpendicularly to the bisector, at a distance corresponding to + * the miter limit. This prevents long spikes being created. + * `FT_STROKER_LINEJOIN_MITER_VARIABLE` generates a mitered line join + * as used in XPS. `FT_STROKER_LINEJOIN_MITER` is an alias for + * `FT_STROKER_LINEJOIN_MITER_VARIABLE`, retained for backward + * compatibility. + */ + typedef enum FT_Stroker_LineJoin_ + { + FT_STROKER_LINEJOIN_ROUND = 0, + FT_STROKER_LINEJOIN_BEVEL = 1, + FT_STROKER_LINEJOIN_MITER_VARIABLE = 2, + FT_STROKER_LINEJOIN_MITER = FT_STROKER_LINEJOIN_MITER_VARIABLE, + FT_STROKER_LINEJOIN_MITER_FIXED = 3 + + } FT_Stroker_LineJoin; + + + /************************************************************************** + * + * @enum: + * FT_Stroker_LineCap + * + * @description: + * These values determine how the end of opened sub-paths are rendered in + * a stroke. + * + * @values: + * FT_STROKER_LINECAP_BUTT :: + * The end of lines is rendered as a full stop on the last point + * itself. + * + * FT_STROKER_LINECAP_ROUND :: + * The end of lines is rendered as a half-circle around the last point. + * + * FT_STROKER_LINECAP_SQUARE :: + * The end of lines is rendered as a square around the last point. + */ + typedef enum FT_Stroker_LineCap_ + { + FT_STROKER_LINECAP_BUTT = 0, + FT_STROKER_LINECAP_ROUND, + FT_STROKER_LINECAP_SQUARE + + } FT_Stroker_LineCap; + + + /************************************************************************** + * + * @enum: + * FT_StrokerBorder + * + * @description: + * These values are used to select a given stroke border in + * @FT_Stroker_GetBorderCounts and @FT_Stroker_ExportBorder. + * + * @values: + * FT_STROKER_BORDER_LEFT :: + * Select the left border, relative to the drawing direction. + * + * FT_STROKER_BORDER_RIGHT :: + * Select the right border, relative to the drawing direction. + * + * @note: + * Applications are generally interested in the 'inside' and 'outside' + * borders. However, there is no direct mapping between these and the + * 'left' and 'right' ones, since this really depends on the glyph's + * drawing orientation, which varies between font formats. + * + * You can however use @FT_Outline_GetInsideBorder and + * @FT_Outline_GetOutsideBorder to get these. + */ + typedef enum FT_StrokerBorder_ + { + FT_STROKER_BORDER_LEFT = 0, + FT_STROKER_BORDER_RIGHT + + } FT_StrokerBorder; + + + /************************************************************************** + * + * @function: + * FT_Outline_GetInsideBorder + * + * @description: + * Retrieve the @FT_StrokerBorder value corresponding to the 'inside' + * borders of a given outline. + * + * @input: + * outline :: + * The source outline handle. + * + * @return: + * The border index. @FT_STROKER_BORDER_RIGHT for empty or invalid + * outlines. + */ + FT_EXPORT( FT_StrokerBorder ) + FT_Outline_GetInsideBorder( FT_Outline* outline ); + + + /************************************************************************** + * + * @function: + * FT_Outline_GetOutsideBorder + * + * @description: + * Retrieve the @FT_StrokerBorder value corresponding to the 'outside' + * borders of a given outline. + * + * @input: + * outline :: + * The source outline handle. + * + * @return: + * The border index. @FT_STROKER_BORDER_LEFT for empty or invalid + * outlines. + */ + FT_EXPORT( FT_StrokerBorder ) + FT_Outline_GetOutsideBorder( FT_Outline* outline ); + + + /************************************************************************** + * + * @function: + * FT_Stroker_New + * + * @description: + * Create a new stroker object. + * + * @input: + * library :: + * FreeType library handle. + * + * @output: + * astroker :: + * A new stroker object handle. `NULL` in case of error. + * + * @return: + * FreeType error code. 0~means success. + */ + FT_EXPORT( FT_Error ) + FT_Stroker_New( FT_Library library, + FT_Stroker *astroker ); + + + /************************************************************************** + * + * @function: + * FT_Stroker_Set + * + * @description: + * Reset a stroker object's attributes. + * + * @input: + * stroker :: + * The target stroker handle. + * + * radius :: + * The border radius. + * + * line_cap :: + * The line cap style. + * + * line_join :: + * The line join style. + * + * miter_limit :: + * The maximum reciprocal sine of half-angle at the miter join, + * expressed as 16.16 fixed-point value. + * + * @note: + * The `radius` is expressed in the same units as the outline + * coordinates. + * + * The `miter_limit` multiplied by the `radius` gives the maximum size + * of a miter spike, at which it is clipped for + * @FT_STROKER_LINEJOIN_MITER_VARIABLE or replaced with a bevel join for + * @FT_STROKER_LINEJOIN_MITER_FIXED. + * + * This function calls @FT_Stroker_Rewind automatically. + */ + FT_EXPORT( void ) + FT_Stroker_Set( FT_Stroker stroker, + FT_Fixed radius, + FT_Stroker_LineCap line_cap, + FT_Stroker_LineJoin line_join, + FT_Fixed miter_limit ); + + + /************************************************************************** + * + * @function: + * FT_Stroker_Rewind + * + * @description: + * Reset a stroker object without changing its attributes. You should + * call this function before beginning a new series of calls to + * @FT_Stroker_BeginSubPath or @FT_Stroker_EndSubPath. + * + * @input: + * stroker :: + * The target stroker handle. + */ + FT_EXPORT( void ) + FT_Stroker_Rewind( FT_Stroker stroker ); + + + /************************************************************************** + * + * @function: + * FT_Stroker_ParseOutline + * + * @description: + * A convenience function used to parse a whole outline with the stroker. + * The resulting outline(s) can be retrieved later by functions like + * @FT_Stroker_GetCounts and @FT_Stroker_Export. + * + * @input: + * stroker :: + * The target stroker handle. + * + * outline :: + * The source outline. + * + * opened :: + * A boolean. If~1, the outline is treated as an open path instead of + * a closed one. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * If `opened` is~0 (the default), the outline is treated as a closed + * path, and the stroker generates two distinct 'border' outlines. + * + * If `opened` is~1, the outline is processed as an open path, and the + * stroker generates a single 'stroke' outline. + * + * This function calls @FT_Stroker_Rewind automatically. + */ + FT_EXPORT( FT_Error ) + FT_Stroker_ParseOutline( FT_Stroker stroker, + FT_Outline* outline, + FT_Bool opened ); + + + /************************************************************************** + * + * @function: + * FT_Stroker_BeginSubPath + * + * @description: + * Start a new sub-path in the stroker. + * + * @input: + * stroker :: + * The target stroker handle. + * + * to :: + * A pointer to the start vector. + * + * open :: + * A boolean. If~1, the sub-path is treated as an open one. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * This function is useful when you need to stroke a path that is not + * stored as an @FT_Outline object. + */ + FT_EXPORT( FT_Error ) + FT_Stroker_BeginSubPath( FT_Stroker stroker, + FT_Vector* to, + FT_Bool open ); + + + /************************************************************************** + * + * @function: + * FT_Stroker_EndSubPath + * + * @description: + * Close the current sub-path in the stroker. + * + * @input: + * stroker :: + * The target stroker handle. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * You should call this function after @FT_Stroker_BeginSubPath. If the + * subpath was not 'opened', this function 'draws' a single line segment + * to the start position when needed. + */ + FT_EXPORT( FT_Error ) + FT_Stroker_EndSubPath( FT_Stroker stroker ); + + + /************************************************************************** + * + * @function: + * FT_Stroker_LineTo + * + * @description: + * 'Draw' a single line segment in the stroker's current sub-path, from + * the last position. + * + * @input: + * stroker :: + * The target stroker handle. + * + * to :: + * A pointer to the destination point. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * You should call this function between @FT_Stroker_BeginSubPath and + * @FT_Stroker_EndSubPath. + */ + FT_EXPORT( FT_Error ) + FT_Stroker_LineTo( FT_Stroker stroker, + FT_Vector* to ); + + + /************************************************************************** + * + * @function: + * FT_Stroker_ConicTo + * + * @description: + * 'Draw' a single quadratic Bezier in the stroker's current sub-path, + * from the last position. + * + * @input: + * stroker :: + * The target stroker handle. + * + * control :: + * A pointer to a Bezier control point. + * + * to :: + * A pointer to the destination point. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * You should call this function between @FT_Stroker_BeginSubPath and + * @FT_Stroker_EndSubPath. + */ + FT_EXPORT( FT_Error ) + FT_Stroker_ConicTo( FT_Stroker stroker, + FT_Vector* control, + FT_Vector* to ); + + + /************************************************************************** + * + * @function: + * FT_Stroker_CubicTo + * + * @description: + * 'Draw' a single cubic Bezier in the stroker's current sub-path, from + * the last position. + * + * @input: + * stroker :: + * The target stroker handle. + * + * control1 :: + * A pointer to the first Bezier control point. + * + * control2 :: + * A pointer to second Bezier control point. + * + * to :: + * A pointer to the destination point. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * You should call this function between @FT_Stroker_BeginSubPath and + * @FT_Stroker_EndSubPath. + */ + FT_EXPORT( FT_Error ) + FT_Stroker_CubicTo( FT_Stroker stroker, + FT_Vector* control1, + FT_Vector* control2, + FT_Vector* to ); + + + /************************************************************************** + * + * @function: + * FT_Stroker_GetBorderCounts + * + * @description: + * Call this function once you have finished parsing your paths with the + * stroker. It returns the number of points and contours necessary to + * export one of the 'border' or 'stroke' outlines generated by the + * stroker. + * + * @input: + * stroker :: + * The target stroker handle. + * + * border :: + * The border index. + * + * @output: + * anum_points :: + * The number of points. + * + * anum_contours :: + * The number of contours. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * When an outline, or a sub-path, is 'closed', the stroker generates two + * independent 'border' outlines, named 'left' and 'right'. + * + * When the outline, or a sub-path, is 'opened', the stroker merges the + * 'border' outlines with caps. The 'left' border receives all points, + * while the 'right' border becomes empty. + * + * Use the function @FT_Stroker_GetCounts instead if you want to retrieve + * the counts associated to both borders. + */ + FT_EXPORT( FT_Error ) + FT_Stroker_GetBorderCounts( FT_Stroker stroker, + FT_StrokerBorder border, + FT_UInt *anum_points, + FT_UInt *anum_contours ); + + + /************************************************************************** + * + * @function: + * FT_Stroker_ExportBorder + * + * @description: + * Call this function after @FT_Stroker_GetBorderCounts to export the + * corresponding border to your own @FT_Outline structure. + * + * Note that this function appends the border points and contours to your + * outline, but does not try to resize its arrays. + * + * @input: + * stroker :: + * The target stroker handle. + * + * border :: + * The border index. + * + * outline :: + * The target outline handle. + * + * @note: + * Always call this function after @FT_Stroker_GetBorderCounts to get + * sure that there is enough room in your @FT_Outline object to receive + * all new data. + * + * When an outline, or a sub-path, is 'closed', the stroker generates two + * independent 'border' outlines, named 'left' and 'right'. + * + * When the outline, or a sub-path, is 'opened', the stroker merges the + * 'border' outlines with caps. The 'left' border receives all points, + * while the 'right' border becomes empty. + * + * Use the function @FT_Stroker_Export instead if you want to retrieve + * all borders at once. + */ + FT_EXPORT( void ) + FT_Stroker_ExportBorder( FT_Stroker stroker, + FT_StrokerBorder border, + FT_Outline* outline ); + + + /************************************************************************** + * + * @function: + * FT_Stroker_GetCounts + * + * @description: + * Call this function once you have finished parsing your paths with the + * stroker. It returns the number of points and contours necessary to + * export all points/borders from the stroked outline/path. + * + * @input: + * stroker :: + * The target stroker handle. + * + * @output: + * anum_points :: + * The number of points. + * + * anum_contours :: + * The number of contours. + * + * @return: + * FreeType error code. 0~means success. + */ + FT_EXPORT( FT_Error ) + FT_Stroker_GetCounts( FT_Stroker stroker, + FT_UInt *anum_points, + FT_UInt *anum_contours ); + + + /************************************************************************** + * + * @function: + * FT_Stroker_Export + * + * @description: + * Call this function after @FT_Stroker_GetBorderCounts to export all + * borders to your own @FT_Outline structure. + * + * Note that this function appends the border points and contours to your + * outline, but does not try to resize its arrays. + * + * @input: + * stroker :: + * The target stroker handle. + * + * outline :: + * The target outline handle. + */ + FT_EXPORT( void ) + FT_Stroker_Export( FT_Stroker stroker, + FT_Outline* outline ); + + + /************************************************************************** + * + * @function: + * FT_Stroker_Done + * + * @description: + * Destroy a stroker object. + * + * @input: + * stroker :: + * A stroker handle. Can be `NULL`. + */ + FT_EXPORT( void ) + FT_Stroker_Done( FT_Stroker stroker ); + + + /************************************************************************** + * + * @function: + * FT_Glyph_Stroke + * + * @description: + * Stroke a given outline glyph object with a given stroker. + * + * @inout: + * pglyph :: + * Source glyph handle on input, new glyph handle on output. + * + * @input: + * stroker :: + * A stroker handle. + * + * destroy :: + * A Boolean. If~1, the source glyph object is destroyed on success. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * The source glyph is untouched in case of error. + * + * Adding stroke may yield a significantly wider and taller glyph + * depending on how large of a radius was used to stroke the glyph. You + * may need to manually adjust horizontal and vertical advance amounts to + * account for this added size. + */ + FT_EXPORT( FT_Error ) + FT_Glyph_Stroke( FT_Glyph *pglyph, + FT_Stroker stroker, + FT_Bool destroy ); + + + /************************************************************************** + * + * @function: + * FT_Glyph_StrokeBorder + * + * @description: + * Stroke a given outline glyph object with a given stroker, but only + * return either its inside or outside border. + * + * @inout: + * pglyph :: + * Source glyph handle on input, new glyph handle on output. + * + * @input: + * stroker :: + * A stroker handle. + * + * inside :: + * A Boolean. If~1, return the inside border, otherwise the outside + * border. + * + * destroy :: + * A Boolean. If~1, the source glyph object is destroyed on success. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * The source glyph is untouched in case of error. + * + * Adding stroke may yield a significantly wider and taller glyph + * depending on how large of a radius was used to stroke the glyph. You + * may need to manually adjust horizontal and vertical advance amounts to + * account for this added size. + */ + FT_EXPORT( FT_Error ) + FT_Glyph_StrokeBorder( FT_Glyph *pglyph, + FT_Stroker stroker, + FT_Bool inside, + FT_Bool destroy ); + + /* */ + +FT_END_HEADER + +#endif /* FTSTROKE_H_ */ + + +/* END */ + + +/* Local Variables: */ +/* coding: utf-8 */ +/* End: */ diff --git a/dependencies/winx64/include/freetype2/freetype/ftsynth.h b/dependencies/winx64/include/freetype2/freetype/ftsynth.h new file mode 100644 index 0000000..43081b6 --- /dev/null +++ b/dependencies/winx64/include/freetype2/freetype/ftsynth.h @@ -0,0 +1,104 @@ +/**************************************************************************** + * + * ftsynth.h + * + * FreeType synthesizing code for emboldening and slanting + * (specification). + * + * Copyright (C) 2000-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + + /*************************************************************************/ + /*************************************************************************/ + /*************************************************************************/ + /*************************************************************************/ + /*************************************************************************/ + /********* *********/ + /********* WARNING, THIS IS ALPHA CODE! THIS API *********/ + /********* IS DUE TO CHANGE UNTIL STRICTLY NOTIFIED BY THE *********/ + /********* FREETYPE DEVELOPMENT TEAM *********/ + /********* *********/ + /*************************************************************************/ + /*************************************************************************/ + /*************************************************************************/ + /*************************************************************************/ + /*************************************************************************/ + + + /* Main reason for not lifting the functions in this module to a */ + /* 'standard' API is that the used parameters for emboldening and */ + /* slanting are not configurable. Consider the functions as a */ + /* code resource that should be copied into the application and */ + /* adapted to the particular needs. */ + + +#ifndef FTSYNTH_H_ +#define FTSYNTH_H_ + + +#include + +#ifdef FREETYPE_H +#error "freetype.h of FreeType 1 has been loaded!" +#error "Please fix the directory search order for header files" +#error "so that freetype.h of FreeType 2 is found first." +#endif + + +FT_BEGIN_HEADER + + /* Embolden a glyph by a 'reasonable' value (which is highly a matter of */ + /* taste). This function is actually a convenience function, providing */ + /* a wrapper for @FT_Outline_Embolden and @FT_Bitmap_Embolden. */ + /* */ + /* For emboldened outlines the height, width, and advance metrics are */ + /* increased by the strength of the emboldening -- this even affects */ + /* mono-width fonts! */ + /* */ + /* You can also call @FT_Outline_Get_CBox to get precise values. */ + FT_EXPORT( void ) + FT_GlyphSlot_Embolden( FT_GlyphSlot slot ); + + /* Precisely adjust the glyph weight either horizontally or vertically. */ + /* The `xdelta` and `ydelta` values are fractions of the face Em size */ + /* (in fixed-point format). Considering that a regular face would have */ + /* stem widths on the order of 0.1 Em, a delta of 0.05 (0x0CCC) should */ + /* be very noticeable. To increase or decrease the weight, use positive */ + /* or negative values, respectively. */ + FT_EXPORT( void ) + FT_GlyphSlot_AdjustWeight( FT_GlyphSlot slot, + FT_Fixed xdelta, + FT_Fixed ydelta ); + + + /* Slant an outline glyph to the right by about 12 degrees. */ + FT_EXPORT( void ) + FT_GlyphSlot_Oblique( FT_GlyphSlot slot ); + + /* Slant an outline glyph by a given sine of an angle. You can apply */ + /* slant along either x- or y-axis by choosing a corresponding non-zero */ + /* argument. If both slants are non-zero, some affine transformation */ + /* will result. */ + FT_EXPORT( void ) + FT_GlyphSlot_Slant( FT_GlyphSlot slot, + FT_Fixed xslant, + FT_Fixed yslant ); + + /* */ + + +FT_END_HEADER + +#endif /* FTSYNTH_H_ */ + + +/* END */ diff --git a/dependencies/winx64/include/freetype2/freetype/ftsystem.h b/dependencies/winx64/include/freetype2/freetype/ftsystem.h new file mode 100644 index 0000000..1eacb3a --- /dev/null +++ b/dependencies/winx64/include/freetype2/freetype/ftsystem.h @@ -0,0 +1,350 @@ +/**************************************************************************** + * + * ftsystem.h + * + * FreeType low-level system interface definition (specification). + * + * Copyright (C) 1996-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + +#ifndef FTSYSTEM_H_ +#define FTSYSTEM_H_ + + + + +FT_BEGIN_HEADER + + + /************************************************************************** + * + * @section: + * system_interface + * + * @title: + * System Interface + * + * @abstract: + * How FreeType manages memory and i/o. + * + * @description: + * This section contains various definitions related to memory management + * and i/o access. You need to understand this information if you want to + * use a custom memory manager or you own i/o streams. + * + */ + + + /************************************************************************** + * + * M E M O R Y M A N A G E M E N T + * + */ + + + /************************************************************************** + * + * @type: + * FT_Memory + * + * @description: + * A handle to a given memory manager object, defined with an + * @FT_MemoryRec structure. + * + */ + typedef struct FT_MemoryRec_* FT_Memory; + + + /************************************************************************** + * + * @functype: + * FT_Alloc_Func + * + * @description: + * A function used to allocate `size` bytes from `memory`. + * + * @input: + * memory :: + * A handle to the source memory manager. + * + * size :: + * The size in bytes to allocate. + * + * @return: + * Address of new memory block. 0~in case of failure. + * + */ + typedef void* + (*FT_Alloc_Func)( FT_Memory memory, + long size ); + + + /************************************************************************** + * + * @functype: + * FT_Free_Func + * + * @description: + * A function used to release a given block of memory. + * + * @input: + * memory :: + * A handle to the source memory manager. + * + * block :: + * The address of the target memory block. + * + */ + typedef void + (*FT_Free_Func)( FT_Memory memory, + void* block ); + + + /************************************************************************** + * + * @functype: + * FT_Realloc_Func + * + * @description: + * A function used to re-allocate a given block of memory. + * + * @input: + * memory :: + * A handle to the source memory manager. + * + * cur_size :: + * The block's current size in bytes. + * + * new_size :: + * The block's requested new size. + * + * block :: + * The block's current address. + * + * @return: + * New block address. 0~in case of memory shortage. + * + * @note: + * In case of error, the old block must still be available. + * + */ + typedef void* + (*FT_Realloc_Func)( FT_Memory memory, + long cur_size, + long new_size, + void* block ); + + + /************************************************************************** + * + * @struct: + * FT_MemoryRec + * + * @description: + * A structure used to describe a given memory manager to FreeType~2. + * + * @fields: + * user :: + * A generic typeless pointer for user data. + * + * alloc :: + * A pointer type to an allocation function. + * + * free :: + * A pointer type to an memory freeing function. + * + * realloc :: + * A pointer type to a reallocation function. + * + */ + struct FT_MemoryRec_ + { + void* user; + FT_Alloc_Func alloc; + FT_Free_Func free; + FT_Realloc_Func realloc; + }; + + + /************************************************************************** + * + * I / O M A N A G E M E N T + * + */ + + + /************************************************************************** + * + * @type: + * FT_Stream + * + * @description: + * A handle to an input stream. + * + * @also: + * See @FT_StreamRec for the publicly accessible fields of a given stream + * object. + * + */ + typedef struct FT_StreamRec_* FT_Stream; + + + /************************************************************************** + * + * @struct: + * FT_StreamDesc + * + * @description: + * A union type used to store either a long or a pointer. This is used + * to store a file descriptor or a `FILE*` in an input stream. + * + */ + typedef union FT_StreamDesc_ + { + long value; + void* pointer; + + } FT_StreamDesc; + + + /************************************************************************** + * + * @functype: + * FT_Stream_IoFunc + * + * @description: + * A function used to seek and read data from a given input stream. + * + * @input: + * stream :: + * A handle to the source stream. + * + * offset :: + * The offset from the start of the stream to seek to. + * + * buffer :: + * The address of the read buffer. + * + * count :: + * The number of bytes to read from the stream. + * + * @return: + * If count >~0, return the number of bytes effectively read by the + * stream (after seeking to `offset`). If count ==~0, return the status + * of the seek operation (non-zero indicates an error). + * + */ + typedef unsigned long + (*FT_Stream_IoFunc)( FT_Stream stream, + unsigned long offset, + unsigned char* buffer, + unsigned long count ); + + + /************************************************************************** + * + * @functype: + * FT_Stream_CloseFunc + * + * @description: + * A function used to close a given input stream. + * + * @input: + * stream :: + * A handle to the target stream. + * + */ + typedef void + (*FT_Stream_CloseFunc)( FT_Stream stream ); + + + /************************************************************************** + * + * @struct: + * FT_StreamRec + * + * @description: + * A structure used to describe an input stream. + * + * @input: + * base :: + * For memory-based streams, this is the address of the first stream + * byte in memory. This field should always be set to `NULL` for + * disk-based streams. + * + * size :: + * The stream size in bytes. + * + * In case of compressed streams where the size is unknown before + * actually doing the decompression, the value is set to 0x7FFFFFFF. + * (Note that this size value can occur for normal streams also; it is + * thus just a hint.) + * + * pos :: + * The current position within the stream. + * + * descriptor :: + * This field is a union that can hold an integer or a pointer. It is + * used by stream implementations to store file descriptors or `FILE*` + * pointers. + * + * pathname :: + * This field is completely ignored by FreeType. However, it is often + * useful during debugging to use it to store the stream's filename + * (where available). + * + * read :: + * The stream's input function. + * + * close :: + * The stream's close function. + * + * memory :: + * The memory manager to use to preload frames. This is set internally + * by FreeType and shouldn't be touched by stream implementations. + * + * cursor :: + * This field is set and used internally by FreeType when parsing + * frames. In particular, the `FT_GET_XXX` macros use this instead of + * the `pos` field. + * + * limit :: + * This field is set and used internally by FreeType when parsing + * frames. + * + */ + typedef struct FT_StreamRec_ + { + unsigned char* base; + unsigned long size; + unsigned long pos; + + FT_StreamDesc descriptor; + FT_StreamDesc pathname; + FT_Stream_IoFunc read; + FT_Stream_CloseFunc close; + + FT_Memory memory; + unsigned char* cursor; + unsigned char* limit; + + } FT_StreamRec; + + /* */ + + +FT_END_HEADER + +#endif /* FTSYSTEM_H_ */ + + +/* END */ diff --git a/dependencies/winx64/include/freetype2/freetype/fttrigon.h b/dependencies/winx64/include/freetype2/freetype/fttrigon.h new file mode 100644 index 0000000..a5299e9 --- /dev/null +++ b/dependencies/winx64/include/freetype2/freetype/fttrigon.h @@ -0,0 +1,350 @@ +/**************************************************************************** + * + * fttrigon.h + * + * FreeType trigonometric functions (specification). + * + * Copyright (C) 2001-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + +#ifndef FTTRIGON_H_ +#define FTTRIGON_H_ + +#include + +#ifdef FREETYPE_H +#error "freetype.h of FreeType 1 has been loaded!" +#error "Please fix the directory search order for header files" +#error "so that freetype.h of FreeType 2 is found first." +#endif + + +FT_BEGIN_HEADER + + + /************************************************************************** + * + * @section: + * computations + * + */ + + + /************************************************************************** + * + * @type: + * FT_Angle + * + * @description: + * This type is used to model angle values in FreeType. Note that the + * angle is a 16.16 fixed-point value expressed in degrees. + * + */ + typedef FT_Fixed FT_Angle; + + + /************************************************************************** + * + * @macro: + * FT_ANGLE_PI + * + * @description: + * The angle pi expressed in @FT_Angle units. + * + */ +#define FT_ANGLE_PI ( 180L << 16 ) + + + /************************************************************************** + * + * @macro: + * FT_ANGLE_2PI + * + * @description: + * The angle 2*pi expressed in @FT_Angle units. + * + */ +#define FT_ANGLE_2PI ( FT_ANGLE_PI * 2 ) + + + /************************************************************************** + * + * @macro: + * FT_ANGLE_PI2 + * + * @description: + * The angle pi/2 expressed in @FT_Angle units. + * + */ +#define FT_ANGLE_PI2 ( FT_ANGLE_PI / 2 ) + + + /************************************************************************** + * + * @macro: + * FT_ANGLE_PI4 + * + * @description: + * The angle pi/4 expressed in @FT_Angle units. + * + */ +#define FT_ANGLE_PI4 ( FT_ANGLE_PI / 4 ) + + + /************************************************************************** + * + * @function: + * FT_Sin + * + * @description: + * Return the sinus of a given angle in fixed-point format. + * + * @input: + * angle :: + * The input angle. + * + * @return: + * The sinus value. + * + * @note: + * If you need both the sinus and cosinus for a given angle, use the + * function @FT_Vector_Unit. + * + */ + FT_EXPORT( FT_Fixed ) + FT_Sin( FT_Angle angle ); + + + /************************************************************************** + * + * @function: + * FT_Cos + * + * @description: + * Return the cosinus of a given angle in fixed-point format. + * + * @input: + * angle :: + * The input angle. + * + * @return: + * The cosinus value. + * + * @note: + * If you need both the sinus and cosinus for a given angle, use the + * function @FT_Vector_Unit. + * + */ + FT_EXPORT( FT_Fixed ) + FT_Cos( FT_Angle angle ); + + + /************************************************************************** + * + * @function: + * FT_Tan + * + * @description: + * Return the tangent of a given angle in fixed-point format. + * + * @input: + * angle :: + * The input angle. + * + * @return: + * The tangent value. + * + */ + FT_EXPORT( FT_Fixed ) + FT_Tan( FT_Angle angle ); + + + /************************************************************************** + * + * @function: + * FT_Atan2 + * + * @description: + * Return the arc-tangent corresponding to a given vector (x,y) in the 2d + * plane. + * + * @input: + * x :: + * The horizontal vector coordinate. + * + * y :: + * The vertical vector coordinate. + * + * @return: + * The arc-tangent value (i.e. angle). + * + */ + FT_EXPORT( FT_Angle ) + FT_Atan2( FT_Fixed x, + FT_Fixed y ); + + + /************************************************************************** + * + * @function: + * FT_Angle_Diff + * + * @description: + * Return the difference between two angles. The result is always + * constrained to the ]-PI..PI] interval. + * + * @input: + * angle1 :: + * First angle. + * + * angle2 :: + * Second angle. + * + * @return: + * Constrained value of `angle2-angle1`. + * + */ + FT_EXPORT( FT_Angle ) + FT_Angle_Diff( FT_Angle angle1, + FT_Angle angle2 ); + + + /************************************************************************** + * + * @function: + * FT_Vector_Unit + * + * @description: + * Return the unit vector corresponding to a given angle. After the + * call, the value of `vec.x` will be `cos(angle)`, and the value of + * `vec.y` will be `sin(angle)`. + * + * This function is useful to retrieve both the sinus and cosinus of a + * given angle quickly. + * + * @output: + * vec :: + * The address of target vector. + * + * @input: + * angle :: + * The input angle. + * + */ + FT_EXPORT( void ) + FT_Vector_Unit( FT_Vector* vec, + FT_Angle angle ); + + + /************************************************************************** + * + * @function: + * FT_Vector_Rotate + * + * @description: + * Rotate a vector by a given angle. + * + * @inout: + * vec :: + * The address of target vector. + * + * @input: + * angle :: + * The input angle. + * + */ + FT_EXPORT( void ) + FT_Vector_Rotate( FT_Vector* vec, + FT_Angle angle ); + + + /************************************************************************** + * + * @function: + * FT_Vector_Length + * + * @description: + * Return the length of a given vector. + * + * @input: + * vec :: + * The address of target vector. + * + * @return: + * The vector length, expressed in the same units that the original + * vector coordinates. + * + */ + FT_EXPORT( FT_Fixed ) + FT_Vector_Length( FT_Vector* vec ); + + + /************************************************************************** + * + * @function: + * FT_Vector_Polarize + * + * @description: + * Compute both the length and angle of a given vector. + * + * @input: + * vec :: + * The address of source vector. + * + * @output: + * length :: + * The vector length. + * + * angle :: + * The vector angle. + * + */ + FT_EXPORT( void ) + FT_Vector_Polarize( FT_Vector* vec, + FT_Fixed *length, + FT_Angle *angle ); + + + /************************************************************************** + * + * @function: + * FT_Vector_From_Polar + * + * @description: + * Compute vector coordinates from a length and angle. + * + * @output: + * vec :: + * The address of source vector. + * + * @input: + * length :: + * The vector length. + * + * angle :: + * The vector angle. + * + */ + FT_EXPORT( void ) + FT_Vector_From_Polar( FT_Vector* vec, + FT_Fixed length, + FT_Angle angle ); + + /* */ + + +FT_END_HEADER + +#endif /* FTTRIGON_H_ */ + + +/* END */ diff --git a/dependencies/winx64/include/freetype2/freetype/fttypes.h b/dependencies/winx64/include/freetype2/freetype/fttypes.h new file mode 100644 index 0000000..2781514 --- /dev/null +++ b/dependencies/winx64/include/freetype2/freetype/fttypes.h @@ -0,0 +1,617 @@ +/**************************************************************************** + * + * fttypes.h + * + * FreeType simple types definitions (specification only). + * + * Copyright (C) 1996-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + +#ifndef FTTYPES_H_ +#define FTTYPES_H_ + + +#include +#include FT_CONFIG_CONFIG_H +#include +#include + +#include + + +FT_BEGIN_HEADER + + + /************************************************************************** + * + * @section: + * basic_types + * + * @title: + * Basic Data Types + * + * @abstract: + * The basic data types defined by the library. + * + * @description: + * This section contains the basic data types defined by FreeType~2, + * ranging from simple scalar types to bitmap descriptors. More + * font-specific structures are defined in a different section. Note + * that FreeType does not use floating-point data types. Fractional + * values are represented by fixed-point integers, with lower bits + * storing the fractional part. + * + * @order: + * FT_Byte + * FT_Bytes + * FT_Char + * FT_Int + * FT_UInt + * FT_Int16 + * FT_UInt16 + * FT_Int32 + * FT_UInt32 + * FT_Int64 + * FT_UInt64 + * FT_Short + * FT_UShort + * FT_Long + * FT_ULong + * FT_Bool + * FT_Offset + * FT_PtrDist + * FT_String + * FT_Tag + * FT_Error + * FT_Fixed + * FT_Pointer + * FT_Pos + * FT_Vector + * FT_BBox + * FT_Matrix + * FT_FWord + * FT_UFWord + * FT_F2Dot14 + * FT_UnitVector + * FT_F26Dot6 + * FT_Data + * + * FT_MAKE_TAG + * + * FT_Generic + * FT_Generic_Finalizer + * + * FT_Bitmap + * FT_Pixel_Mode + * FT_Palette_Mode + * FT_Glyph_Format + * FT_IMAGE_TAG + * + */ + + + /************************************************************************** + * + * @type: + * FT_Bool + * + * @description: + * A typedef of unsigned char, used for simple booleans. As usual, + * values 1 and~0 represent true and false, respectively. + */ + typedef unsigned char FT_Bool; + + + /************************************************************************** + * + * @type: + * FT_FWord + * + * @description: + * A signed 16-bit integer used to store a distance in original font + * units. + */ + typedef signed short FT_FWord; /* distance in FUnits */ + + + /************************************************************************** + * + * @type: + * FT_UFWord + * + * @description: + * An unsigned 16-bit integer used to store a distance in original font + * units. + */ + typedef unsigned short FT_UFWord; /* unsigned distance */ + + + /************************************************************************** + * + * @type: + * FT_Char + * + * @description: + * A simple typedef for the _signed_ char type. + */ + typedef signed char FT_Char; + + + /************************************************************************** + * + * @type: + * FT_Byte + * + * @description: + * A simple typedef for the _unsigned_ char type. + */ + typedef unsigned char FT_Byte; + + + /************************************************************************** + * + * @type: + * FT_Bytes + * + * @description: + * A typedef for constant memory areas. + */ + typedef const FT_Byte* FT_Bytes; + + + /************************************************************************** + * + * @type: + * FT_Tag + * + * @description: + * A typedef for 32-bit tags (as used in the SFNT format). + */ + typedef FT_UInt32 FT_Tag; + + + /************************************************************************** + * + * @type: + * FT_String + * + * @description: + * A simple typedef for the char type, usually used for strings. + */ + typedef char FT_String; + + + /************************************************************************** + * + * @type: + * FT_Short + * + * @description: + * A typedef for signed short. + */ + typedef signed short FT_Short; + + + /************************************************************************** + * + * @type: + * FT_UShort + * + * @description: + * A typedef for unsigned short. + */ + typedef unsigned short FT_UShort; + + + /************************************************************************** + * + * @type: + * FT_Int + * + * @description: + * A typedef for the int type. + */ + typedef signed int FT_Int; + + + /************************************************************************** + * + * @type: + * FT_UInt + * + * @description: + * A typedef for the unsigned int type. + */ + typedef unsigned int FT_UInt; + + + /************************************************************************** + * + * @type: + * FT_Long + * + * @description: + * A typedef for signed long. + */ + typedef signed long FT_Long; + + + /************************************************************************** + * + * @type: + * FT_ULong + * + * @description: + * A typedef for unsigned long. + */ + typedef unsigned long FT_ULong; + + + /************************************************************************** + * + * @type: + * FT_F2Dot14 + * + * @description: + * A signed 2.14 fixed-point type used for unit vectors. + */ + typedef signed short FT_F2Dot14; + + + /************************************************************************** + * + * @type: + * FT_F26Dot6 + * + * @description: + * A signed 26.6 fixed-point type used for vectorial pixel coordinates. + */ + typedef signed long FT_F26Dot6; + + + /************************************************************************** + * + * @type: + * FT_Fixed + * + * @description: + * This type is used to store 16.16 fixed-point values, like scaling + * values or matrix coefficients. + */ + typedef signed long FT_Fixed; + + + /************************************************************************** + * + * @type: + * FT_Error + * + * @description: + * The FreeType error code type. A value of~0 is always interpreted as a + * successful operation. + */ + typedef int FT_Error; + + + /************************************************************************** + * + * @type: + * FT_Pointer + * + * @description: + * A simple typedef for a typeless pointer. + */ + typedef void* FT_Pointer; + + + /************************************************************************** + * + * @type: + * FT_Offset + * + * @description: + * This is equivalent to the ANSI~C `size_t` type, i.e., the largest + * _unsigned_ integer type used to express a file size or position, or a + * memory block size. + */ + typedef size_t FT_Offset; + + + /************************************************************************** + * + * @type: + * FT_PtrDist + * + * @description: + * This is equivalent to the ANSI~C `ptrdiff_t` type, i.e., the largest + * _signed_ integer type used to express the distance between two + * pointers. + */ + typedef ft_ptrdiff_t FT_PtrDist; + + + /************************************************************************** + * + * @struct: + * FT_UnitVector + * + * @description: + * A simple structure used to store a 2D vector unit vector. Uses + * FT_F2Dot14 types. + * + * @fields: + * x :: + * Horizontal coordinate. + * + * y :: + * Vertical coordinate. + */ + typedef struct FT_UnitVector_ + { + FT_F2Dot14 x; + FT_F2Dot14 y; + + } FT_UnitVector; + + + /************************************************************************** + * + * @struct: + * FT_Matrix + * + * @description: + * A simple structure used to store a 2x2 matrix. Coefficients are in + * 16.16 fixed-point format. The computation performed is: + * + * ``` + * x' = x*xx + y*xy + * y' = x*yx + y*yy + * ``` + * + * @fields: + * xx :: + * Matrix coefficient. + * + * xy :: + * Matrix coefficient. + * + * yx :: + * Matrix coefficient. + * + * yy :: + * Matrix coefficient. + */ + typedef struct FT_Matrix_ + { + FT_Fixed xx, xy; + FT_Fixed yx, yy; + + } FT_Matrix; + + + /************************************************************************** + * + * @struct: + * FT_Data + * + * @description: + * Read-only binary data represented as a pointer and a length. + * + * @fields: + * pointer :: + * The data. + * + * length :: + * The length of the data in bytes. + */ + typedef struct FT_Data_ + { + const FT_Byte* pointer; + FT_UInt length; + + } FT_Data; + + + /************************************************************************** + * + * @functype: + * FT_Generic_Finalizer + * + * @description: + * Describe a function used to destroy the 'client' data of any FreeType + * object. See the description of the @FT_Generic type for details of + * usage. + * + * @input: + * The address of the FreeType object that is under finalization. Its + * client data is accessed through its `generic` field. + */ + typedef void (*FT_Generic_Finalizer)( void* object ); + + + /************************************************************************** + * + * @struct: + * FT_Generic + * + * @description: + * Client applications often need to associate their own data to a + * variety of FreeType core objects. For example, a text layout API + * might want to associate a glyph cache to a given size object. + * + * Some FreeType object contains a `generic` field, of type `FT_Generic`, + * which usage is left to client applications and font servers. + * + * It can be used to store a pointer to client-specific data, as well as + * the address of a 'finalizer' function, which will be called by + * FreeType when the object is destroyed (for example, the previous + * client example would put the address of the glyph cache destructor in + * the `finalizer` field). + * + * @fields: + * data :: + * A typeless pointer to any client-specified data. This field is + * completely ignored by the FreeType library. + * + * finalizer :: + * A pointer to a 'generic finalizer' function, which will be called + * when the object is destroyed. If this field is set to `NULL`, no + * code will be called. + */ + typedef struct FT_Generic_ + { + void* data; + FT_Generic_Finalizer finalizer; + + } FT_Generic; + + + /************************************************************************** + * + * @macro: + * FT_MAKE_TAG + * + * @description: + * This macro converts four-letter tags that are used to label TrueType + * tables into an `FT_Tag` type, to be used within FreeType. + * + * @note: + * The produced values **must** be 32-bit integers. Don't redefine this + * macro. + */ +#define FT_MAKE_TAG( _x1, _x2, _x3, _x4 ) \ + ( ( FT_STATIC_BYTE_CAST( FT_Tag, _x1 ) << 24 ) | \ + ( FT_STATIC_BYTE_CAST( FT_Tag, _x2 ) << 16 ) | \ + ( FT_STATIC_BYTE_CAST( FT_Tag, _x3 ) << 8 ) | \ + FT_STATIC_BYTE_CAST( FT_Tag, _x4 ) ) + + + /*************************************************************************/ + /*************************************************************************/ + /* */ + /* L I S T M A N A G E M E N T */ + /* */ + /*************************************************************************/ + /*************************************************************************/ + + + /************************************************************************** + * + * @section: + * list_processing + * + */ + + + /************************************************************************** + * + * @type: + * FT_ListNode + * + * @description: + * Many elements and objects in FreeType are listed through an @FT_List + * record (see @FT_ListRec). As its name suggests, an FT_ListNode is a + * handle to a single list element. + */ + typedef struct FT_ListNodeRec_* FT_ListNode; + + + /************************************************************************** + * + * @type: + * FT_List + * + * @description: + * A handle to a list record (see @FT_ListRec). + */ + typedef struct FT_ListRec_* FT_List; + + + /************************************************************************** + * + * @struct: + * FT_ListNodeRec + * + * @description: + * A structure used to hold a single list element. + * + * @fields: + * prev :: + * The previous element in the list. `NULL` if first. + * + * next :: + * The next element in the list. `NULL` if last. + * + * data :: + * A typeless pointer to the listed object. + */ + typedef struct FT_ListNodeRec_ + { + FT_ListNode prev; + FT_ListNode next; + void* data; + + } FT_ListNodeRec; + + + /************************************************************************** + * + * @struct: + * FT_ListRec + * + * @description: + * A structure used to hold a simple doubly-linked list. These are used + * in many parts of FreeType. + * + * @fields: + * head :: + * The head (first element) of doubly-linked list. + * + * tail :: + * The tail (last element) of doubly-linked list. + */ + typedef struct FT_ListRec_ + { + FT_ListNode head; + FT_ListNode tail; + + } FT_ListRec; + + /* */ + + +#define FT_IS_EMPTY( list ) ( (list).head == 0 ) +#define FT_BOOL( x ) FT_STATIC_CAST( FT_Bool, (x) != 0 ) + + /* concatenate C tokens */ +#define FT_ERR_XCAT( x, y ) x ## y +#define FT_ERR_CAT( x, y ) FT_ERR_XCAT( x, y ) + + /* see `ftmoderr.h` for descriptions of the following macros */ + +#define FT_ERR( e ) FT_ERR_CAT( FT_ERR_PREFIX, e ) + +#define FT_ERROR_BASE( x ) ( (x) & 0xFF ) +#define FT_ERROR_MODULE( x ) ( (x) & 0xFF00U ) + +#define FT_ERR_EQ( x, e ) \ + ( FT_ERROR_BASE( x ) == FT_ERROR_BASE( FT_ERR( e ) ) ) +#define FT_ERR_NEQ( x, e ) \ + ( FT_ERROR_BASE( x ) != FT_ERROR_BASE( FT_ERR( e ) ) ) + + +FT_END_HEADER + +#endif /* FTTYPES_H_ */ + + +/* END */ diff --git a/dependencies/winx64/include/freetype2/freetype/ftwinfnt.h b/dependencies/winx64/include/freetype2/freetype/ftwinfnt.h new file mode 100644 index 0000000..ffc0645 --- /dev/null +++ b/dependencies/winx64/include/freetype2/freetype/ftwinfnt.h @@ -0,0 +1,275 @@ +/**************************************************************************** + * + * ftwinfnt.h + * + * FreeType API for accessing Windows fnt-specific data. + * + * Copyright (C) 2003-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + +#ifndef FTWINFNT_H_ +#define FTWINFNT_H_ + +#include + +#ifdef FREETYPE_H +#error "freetype.h of FreeType 1 has been loaded!" +#error "Please fix the directory search order for header files" +#error "so that freetype.h of FreeType 2 is found first." +#endif + + +FT_BEGIN_HEADER + + + /************************************************************************** + * + * @section: + * winfnt_fonts + * + * @title: + * Window FNT Files + * + * @abstract: + * Windows FNT-specific API. + * + * @description: + * This section contains the declaration of Windows FNT-specific + * functions. + * + */ + + + /************************************************************************** + * + * @enum: + * FT_WinFNT_ID_XXX + * + * @description: + * A list of valid values for the `charset` byte in @FT_WinFNT_HeaderRec. + * Exact mapping tables for the various 'cpXXXX' encodings (except for + * 'cp1361') can be found at 'ftp://ftp.unicode.org/Public/' in the + * `MAPPINGS/VENDORS/MICSFT/WINDOWS` subdirectory. 'cp1361' is roughly a + * superset of `MAPPINGS/OBSOLETE/EASTASIA/KSC/JOHAB.TXT`. + * + * @values: + * FT_WinFNT_ID_DEFAULT :: + * This is used for font enumeration and font creation as a 'don't + * care' value. Valid font files don't contain this value. When + * querying for information about the character set of the font that is + * currently selected into a specified device context, this return + * value (of the related Windows API) simply denotes failure. + * + * FT_WinFNT_ID_SYMBOL :: + * There is no known mapping table available. + * + * FT_WinFNT_ID_MAC :: + * Mac Roman encoding. + * + * FT_WinFNT_ID_OEM :: + * From Michael Poettgen : + * + * The 'Windows Font Mapping' article says that `FT_WinFNT_ID_OEM` is + * used for the charset of vector fonts, like `modern.fon`, + * `roman.fon`, and `script.fon` on Windows. + * + * The 'CreateFont' documentation says: The `FT_WinFNT_ID_OEM` value + * specifies a character set that is operating-system dependent. + * + * The 'IFIMETRICS' documentation from the 'Windows Driver Development + * Kit' says: This font supports an OEM-specific character set. The + * OEM character set is system dependent. + * + * In general OEM, as opposed to ANSI (i.e., 'cp1252'), denotes the + * second default codepage that most international versions of Windows + * have. It is one of the OEM codepages from + * + * https://learn.microsoft.com/windows/win32/intl/code-page-identifiers , + * + * and is used for the 'DOS boxes', to support legacy applications. A + * German Windows version for example usually uses ANSI codepage 1252 + * and OEM codepage 850. + * + * FT_WinFNT_ID_CP874 :: + * A superset of Thai TIS 620 and ISO 8859-11. + * + * FT_WinFNT_ID_CP932 :: + * A superset of Japanese Shift-JIS (with minor deviations). + * + * FT_WinFNT_ID_CP936 :: + * A superset of simplified Chinese GB 2312-1980 (with different + * ordering and minor deviations). + * + * FT_WinFNT_ID_CP949 :: + * A superset of Korean Hangul KS~C 5601-1987 (with different ordering + * and minor deviations). + * + * FT_WinFNT_ID_CP950 :: + * A superset of traditional Chinese Big~5 ETen (with different + * ordering and minor deviations). + * + * FT_WinFNT_ID_CP1250 :: + * A superset of East European ISO 8859-2 (with slightly different + * ordering). + * + * FT_WinFNT_ID_CP1251 :: + * A superset of Russian ISO 8859-5 (with different ordering). + * + * FT_WinFNT_ID_CP1252 :: + * ANSI encoding. A superset of ISO 8859-1. + * + * FT_WinFNT_ID_CP1253 :: + * A superset of Greek ISO 8859-7 (with minor modifications). + * + * FT_WinFNT_ID_CP1254 :: + * A superset of Turkish ISO 8859-9. + * + * FT_WinFNT_ID_CP1255 :: + * A superset of Hebrew ISO 8859-8 (with some modifications). + * + * FT_WinFNT_ID_CP1256 :: + * A superset of Arabic ISO 8859-6 (with different ordering). + * + * FT_WinFNT_ID_CP1257 :: + * A superset of Baltic ISO 8859-13 (with some deviations). + * + * FT_WinFNT_ID_CP1258 :: + * For Vietnamese. This encoding doesn't cover all necessary + * characters. + * + * FT_WinFNT_ID_CP1361 :: + * Korean (Johab). + */ + +#define FT_WinFNT_ID_CP1252 0 +#define FT_WinFNT_ID_DEFAULT 1 +#define FT_WinFNT_ID_SYMBOL 2 +#define FT_WinFNT_ID_MAC 77 +#define FT_WinFNT_ID_CP932 128 +#define FT_WinFNT_ID_CP949 129 +#define FT_WinFNT_ID_CP1361 130 +#define FT_WinFNT_ID_CP936 134 +#define FT_WinFNT_ID_CP950 136 +#define FT_WinFNT_ID_CP1253 161 +#define FT_WinFNT_ID_CP1254 162 +#define FT_WinFNT_ID_CP1258 163 +#define FT_WinFNT_ID_CP1255 177 +#define FT_WinFNT_ID_CP1256 178 +#define FT_WinFNT_ID_CP1257 186 +#define FT_WinFNT_ID_CP1251 204 +#define FT_WinFNT_ID_CP874 222 +#define FT_WinFNT_ID_CP1250 238 +#define FT_WinFNT_ID_OEM 255 + + + /************************************************************************** + * + * @struct: + * FT_WinFNT_HeaderRec + * + * @description: + * Windows FNT Header info. + */ + typedef struct FT_WinFNT_HeaderRec_ + { + FT_UShort version; + FT_ULong file_size; + FT_Byte copyright[60]; + FT_UShort file_type; + FT_UShort nominal_point_size; + FT_UShort vertical_resolution; + FT_UShort horizontal_resolution; + FT_UShort ascent; + FT_UShort internal_leading; + FT_UShort external_leading; + FT_Byte italic; + FT_Byte underline; + FT_Byte strike_out; + FT_UShort weight; + FT_Byte charset; + FT_UShort pixel_width; + FT_UShort pixel_height; + FT_Byte pitch_and_family; + FT_UShort avg_width; + FT_UShort max_width; + FT_Byte first_char; + FT_Byte last_char; + FT_Byte default_char; + FT_Byte break_char; + FT_UShort bytes_per_row; + FT_ULong device_offset; + FT_ULong face_name_offset; + FT_ULong bits_pointer; + FT_ULong bits_offset; + FT_Byte reserved; + FT_ULong flags; + FT_UShort A_space; + FT_UShort B_space; + FT_UShort C_space; + FT_UShort color_table_offset; + FT_ULong reserved1[4]; + + } FT_WinFNT_HeaderRec; + + + /************************************************************************** + * + * @struct: + * FT_WinFNT_Header + * + * @description: + * A handle to an @FT_WinFNT_HeaderRec structure. + */ + typedef struct FT_WinFNT_HeaderRec_* FT_WinFNT_Header; + + + /************************************************************************** + * + * @function: + * FT_Get_WinFNT_Header + * + * @description: + * Retrieve a Windows FNT font info header. + * + * @input: + * face :: + * A handle to the input face. + * + * @output: + * aheader :: + * The WinFNT header. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * This function only works with Windows FNT faces, returning an error + * otherwise. + */ + FT_EXPORT( FT_Error ) + FT_Get_WinFNT_Header( FT_Face face, + FT_WinFNT_HeaderRec *aheader ); + + /* */ + + +FT_END_HEADER + +#endif /* FTWINFNT_H_ */ + + +/* END */ + + +/* Local Variables: */ +/* coding: utf-8 */ +/* End: */ diff --git a/dependencies/winx64/include/freetype2/freetype/otsvg.h b/dependencies/winx64/include/freetype2/freetype/otsvg.h new file mode 100644 index 0000000..9d35693 --- /dev/null +++ b/dependencies/winx64/include/freetype2/freetype/otsvg.h @@ -0,0 +1,336 @@ +/**************************************************************************** + * + * otsvg.h + * + * Interface for OT-SVG support related things (specification). + * + * Copyright (C) 2022-2024 by + * David Turner, Robert Wilhelm, Werner Lemberg, and Moazin Khatti. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + +#ifndef OTSVG_H_ +#define OTSVG_H_ + +#include + +#ifdef FREETYPE_H +#error "freetype.h of FreeType 1 has been loaded!" +#error "Please fix the directory search order for header files" +#error "so that freetype.h of FreeType 2 is found first." +#endif + + +FT_BEGIN_HEADER + + + /************************************************************************** + * + * @section: + * svg_fonts + * + * @title: + * OpenType SVG Fonts + * + * @abstract: + * OT-SVG API between FreeType and an external SVG rendering library. + * + * @description: + * This section describes the four hooks necessary to render SVG + * 'documents' that are contained in an OpenType font's 'SVG~' table. + * + * For more information on the implementation, see our standard hooks + * based on 'librsvg' in the [FreeType Demo + * Programs](https://gitlab.freedesktop.org/freetype/freetype-demos) + * repository. + * + */ + + + /************************************************************************** + * + * @functype: + * SVG_Lib_Init_Func + * + * @description: + * A callback that is called when the first OT-SVG glyph is rendered in + * the lifetime of an @FT_Library object. In a typical implementation, + * one would want to allocate a structure and point the `data_pointer` + * to it and perform any library initializations that might be needed. + * + * @inout: + * data_pointer :: + * The SVG rendering module stores a pointer variable that can be used + * by clients to store any data that needs to be shared across + * different hooks. `data_pointer` is essentially a pointer to that + * pointer such that it can be written to as well as read from. + * + * @return: + * FreeType error code. 0 means success. + * + * @since: + * 2.12 + */ + typedef FT_Error + (*SVG_Lib_Init_Func)( FT_Pointer *data_pointer ); + + + /************************************************************************** + * + * @functype: + * SVG_Lib_Free_Func + * + * @description: + * A callback that is called when the `ot-svg` module is being freed. + * It is only called if the init hook was called earlier. This means + * that neither the init nor the free hook is called if no OT-SVG glyph + * is rendered. + * + * In a typical implementation, one would want to free any state + * structure that was allocated in the init hook and perform any + * library-related closure that might be needed. + * + * @inout: + * data_pointer :: + * The SVG rendering module stores a pointer variable that can be used + * by clients to store any data that needs to be shared across + * different hooks. `data_pointer` is essentially a pointer to that + * pointer such that it can be written to as well as read from. + * + * @since: + * 2.12 + */ + typedef void + (*SVG_Lib_Free_Func)( FT_Pointer *data_pointer ); + + + /************************************************************************** + * + * @functype: + * SVG_Lib_Render_Func + * + * @description: + * A callback that is called to render an OT-SVG glyph. This callback + * hook is called right after the preset hook @SVG_Lib_Preset_Slot_Func + * has been called with `cache` set to `TRUE`. The data necessary to + * render is available through the handle @FT_SVG_Document, which is set + * in the `other` field of @FT_GlyphSlotRec. + * + * The render hook is expected to render the SVG glyph to the bitmap + * buffer that is allocated already at `slot->bitmap.buffer`. It also + * sets the `num_grays` value as well as `slot->format`. + * + * @input: + * slot :: + * The slot to render. + * + * @inout: + * data_pointer :: + * The SVG rendering module stores a pointer variable that can be used + * by clients to store any data that needs to be shared across + * different hooks. `data_pointer` is essentially a pointer to that + * pointer such that it can be written to as well as read from. + * + * @return: + * FreeType error code. 0 means success. + * + * @since: + * 2.12 + */ + typedef FT_Error + (*SVG_Lib_Render_Func)( FT_GlyphSlot slot, + FT_Pointer *data_pointer ); + + + /************************************************************************** + * + * @functype: + * SVG_Lib_Preset_Slot_Func + * + * @description: + * A callback that is called to preset the glyph slot. It is called from + * two places. + * + * 1. When `FT_Load_Glyph` needs to preset the glyph slot. + * + * 2. Right before the `svg` module calls the render callback hook. + * + * When it is the former, the argument `cache` is set to `FALSE`. When + * it is the latter, the argument `cache` is set to `TRUE`. This + * distinction has been made because many calculations that are necessary + * for presetting a glyph slot are the same needed later for the render + * callback hook. Thus, if `cache` is `TRUE`, the hook can _cache_ those + * calculations in a memory block referenced by the state pointer. + * + * This hook is expected to preset the slot by setting parameters such as + * `bitmap_left`, `bitmap_top`, `width`, `rows`, `pitch`, and + * `pixel_mode`. It is also expected to set all the metrics for the slot + * including the vertical advance if it is not already set. Typically, + * fonts have horizontal advances but not vertical ones. If those are + * available, they had already been set, otherwise they have to be + * estimated and set manually. The hook must take into account the + * transformations that have been set, and translate the transformation + * matrices into the SVG coordinate system, as the original matrix is + * intended for the TTF/CFF coordinate system. + * + * @input: + * slot :: + * The glyph slot that has the SVG document loaded. + * + * cache :: + * See description. + * + * @inout: + * data_pointer :: + * The SVG rendering module stores a pointer variable that can be used + * by clients to store any data that needs to be shared across + * different hooks. `data_pointer` is essentially a pointer to that + * pointer such that it can be written to as well as read from. + * + * @return: + * FreeType error code. 0 means success. + * + * @since: + * 2.12 + */ + typedef FT_Error + (*SVG_Lib_Preset_Slot_Func)( FT_GlyphSlot slot, + FT_Bool cache, + FT_Pointer *state ); + + + /************************************************************************** + * + * @struct: + * SVG_RendererHooks + * + * @description: + * A structure that stores the four hooks needed to render OT-SVG glyphs + * properly. The structure is publicly used to set the hooks via the + * @svg-hooks driver property. + * + * The behavior of each hook is described in its documentation. One + * thing to note is that the preset hook and the render hook often need + * to do the same operations; therefore, it's better to cache the + * intermediate data in a state structure to avoid calculating it twice. + * For example, in the preset hook one can draw the glyph on a recorder + * surface and later create a bitmap surface from it in the render hook. + * + * All four hooks must be non-NULL. + * + * @fields: + * init_svg :: + * The initialization hook. + * + * free_svg :: + * The cleanup hook. + * + * render_hook :: + * The render hook. + * + * preset_slot :: + * The preset hook. + * + * @since: + * 2.12 + */ + typedef struct SVG_RendererHooks_ + { + SVG_Lib_Init_Func init_svg; + SVG_Lib_Free_Func free_svg; + SVG_Lib_Render_Func render_svg; + + SVG_Lib_Preset_Slot_Func preset_slot; + + } SVG_RendererHooks; + + + /************************************************************************** + * + * @struct: + * FT_SVG_DocumentRec + * + * @description: + * A structure that models one SVG document. + * + * @fields: + * svg_document :: + * A pointer to the SVG document. + * + * svg_document_length :: + * The length of `svg_document`. + * + * metrics :: + * A metrics object storing the size information. + * + * units_per_EM :: + * The size of the EM square. + * + * start_glyph_id :: + * The first glyph ID in the glyph range covered by this document. + * + * end_glyph_id :: + * The last glyph ID in the glyph range covered by this document. + * + * transform :: + * A 2x2 transformation matrix to apply to the glyph while rendering + * it. + * + * delta :: + * The translation to apply to the glyph while rendering. + * + * @note: + * When an @FT_GlyphSlot object `slot` is passed down to a renderer, the + * renderer can only access the `metrics` and `units_per_EM` fields via + * `slot->face`. However, when @FT_Glyph_To_Bitmap sets up a dummy + * object, it has no way to set a `face` object. Thus, metrics + * information and `units_per_EM` (which is necessary for OT-SVG) has to + * be stored separately. + * + * @since: + * 2.12 + */ + typedef struct FT_SVG_DocumentRec_ + { + FT_Byte* svg_document; + FT_ULong svg_document_length; + + FT_Size_Metrics metrics; + FT_UShort units_per_EM; + + FT_UShort start_glyph_id; + FT_UShort end_glyph_id; + + FT_Matrix transform; + FT_Vector delta; + + } FT_SVG_DocumentRec; + + + /************************************************************************** + * + * @type: + * FT_SVG_Document + * + * @description: + * A handle to an @FT_SVG_DocumentRec object. + * + * @since: + * 2.12 + */ + typedef struct FT_SVG_DocumentRec_* FT_SVG_Document; + + +FT_END_HEADER + +#endif /* OTSVG_H_ */ + + +/* END */ diff --git a/dependencies/winx64/include/freetype2/freetype/t1tables.h b/dependencies/winx64/include/freetype2/freetype/t1tables.h new file mode 100644 index 0000000..fbd558a --- /dev/null +++ b/dependencies/winx64/include/freetype2/freetype/t1tables.h @@ -0,0 +1,735 @@ +/**************************************************************************** + * + * t1tables.h + * + * Basic Type 1/Type 2 tables definitions and interface (specification + * only). + * + * Copyright (C) 1996-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + +#ifndef T1TABLES_H_ +#define T1TABLES_H_ + + +#include + +#ifdef FREETYPE_H +#error "freetype.h of FreeType 1 has been loaded!" +#error "Please fix the directory search order for header files" +#error "so that freetype.h of FreeType 2 is found first." +#endif + + +FT_BEGIN_HEADER + + + /************************************************************************** + * + * @section: + * type1_tables + * + * @title: + * Type 1 Tables + * + * @abstract: + * Type~1-specific font tables. + * + * @description: + * This section contains the definition of Type~1-specific tables, + * including structures related to other PostScript font formats. + * + * @order: + * PS_FontInfoRec + * PS_FontInfo + * PS_PrivateRec + * PS_Private + * + * CID_FaceDictRec + * CID_FaceDict + * CID_FaceInfoRec + * CID_FaceInfo + * + * FT_Has_PS_Glyph_Names + * FT_Get_PS_Font_Info + * FT_Get_PS_Font_Private + * FT_Get_PS_Font_Value + * + * T1_Blend_Flags + * T1_EncodingType + * PS_Dict_Keys + * + */ + + + /* Note that we separate font data in PS_FontInfoRec and PS_PrivateRec */ + /* structures in order to support Multiple Master fonts. */ + + + /************************************************************************** + * + * @struct: + * PS_FontInfoRec + * + * @description: + * A structure used to model a Type~1 or Type~2 FontInfo dictionary. + * Note that for Multiple Master fonts, each instance has its own + * FontInfo dictionary. + */ + typedef struct PS_FontInfoRec_ + { + FT_String* version; + FT_String* notice; + FT_String* full_name; + FT_String* family_name; + FT_String* weight; + FT_Long italic_angle; + FT_Bool is_fixed_pitch; + FT_Short underline_position; + FT_UShort underline_thickness; + + } PS_FontInfoRec; + + + /************************************************************************** + * + * @struct: + * PS_FontInfo + * + * @description: + * A handle to a @PS_FontInfoRec structure. + */ + typedef struct PS_FontInfoRec_* PS_FontInfo; + + + /************************************************************************** + * + * @struct: + * T1_FontInfo + * + * @description: + * This type is equivalent to @PS_FontInfoRec. It is deprecated but kept + * to maintain source compatibility between various versions of FreeType. + */ + typedef PS_FontInfoRec T1_FontInfo; + + + /************************************************************************** + * + * @struct: + * PS_PrivateRec + * + * @description: + * A structure used to model a Type~1 or Type~2 private dictionary. Note + * that for Multiple Master fonts, each instance has its own Private + * dictionary. + */ + typedef struct PS_PrivateRec_ + { + FT_Int unique_id; + FT_Int lenIV; + + FT_Byte num_blue_values; + FT_Byte num_other_blues; + FT_Byte num_family_blues; + FT_Byte num_family_other_blues; + + FT_Short blue_values[14]; + FT_Short other_blues[10]; + + FT_Short family_blues [14]; + FT_Short family_other_blues[10]; + + FT_Fixed blue_scale; + FT_Int blue_shift; + FT_Int blue_fuzz; + + FT_UShort standard_width[1]; + FT_UShort standard_height[1]; + + FT_Byte num_snap_widths; + FT_Byte num_snap_heights; + FT_Bool force_bold; + FT_Bool round_stem_up; + + FT_Short snap_widths [13]; /* including std width */ + FT_Short snap_heights[13]; /* including std height */ + + FT_Fixed expansion_factor; + + FT_Long language_group; + FT_Long password; + + FT_Short min_feature[2]; + + } PS_PrivateRec; + + + /************************************************************************** + * + * @struct: + * PS_Private + * + * @description: + * A handle to a @PS_PrivateRec structure. + */ + typedef struct PS_PrivateRec_* PS_Private; + + + /************************************************************************** + * + * @struct: + * T1_Private + * + * @description: + * This type is equivalent to @PS_PrivateRec. It is deprecated but kept + * to maintain source compatibility between various versions of FreeType. + */ + typedef PS_PrivateRec T1_Private; + + + /************************************************************************** + * + * @enum: + * T1_Blend_Flags + * + * @description: + * A set of flags used to indicate which fields are present in a given + * blend dictionary (font info or private). Used to support Multiple + * Masters fonts. + * + * @values: + * T1_BLEND_UNDERLINE_POSITION :: + * T1_BLEND_UNDERLINE_THICKNESS :: + * T1_BLEND_ITALIC_ANGLE :: + * T1_BLEND_BLUE_VALUES :: + * T1_BLEND_OTHER_BLUES :: + * T1_BLEND_STANDARD_WIDTH :: + * T1_BLEND_STANDARD_HEIGHT :: + * T1_BLEND_STEM_SNAP_WIDTHS :: + * T1_BLEND_STEM_SNAP_HEIGHTS :: + * T1_BLEND_BLUE_SCALE :: + * T1_BLEND_BLUE_SHIFT :: + * T1_BLEND_FAMILY_BLUES :: + * T1_BLEND_FAMILY_OTHER_BLUES :: + * T1_BLEND_FORCE_BOLD :: + */ + typedef enum T1_Blend_Flags_ + { + /* required fields in a FontInfo blend dictionary */ + T1_BLEND_UNDERLINE_POSITION = 0, + T1_BLEND_UNDERLINE_THICKNESS, + T1_BLEND_ITALIC_ANGLE, + + /* required fields in a Private blend dictionary */ + T1_BLEND_BLUE_VALUES, + T1_BLEND_OTHER_BLUES, + T1_BLEND_STANDARD_WIDTH, + T1_BLEND_STANDARD_HEIGHT, + T1_BLEND_STEM_SNAP_WIDTHS, + T1_BLEND_STEM_SNAP_HEIGHTS, + T1_BLEND_BLUE_SCALE, + T1_BLEND_BLUE_SHIFT, + T1_BLEND_FAMILY_BLUES, + T1_BLEND_FAMILY_OTHER_BLUES, + T1_BLEND_FORCE_BOLD, + + T1_BLEND_MAX /* do not remove */ + + } T1_Blend_Flags; + + + /* these constants are deprecated; use the corresponding */ + /* `T1_Blend_Flags` values instead */ +#define t1_blend_underline_position T1_BLEND_UNDERLINE_POSITION +#define t1_blend_underline_thickness T1_BLEND_UNDERLINE_THICKNESS +#define t1_blend_italic_angle T1_BLEND_ITALIC_ANGLE +#define t1_blend_blue_values T1_BLEND_BLUE_VALUES +#define t1_blend_other_blues T1_BLEND_OTHER_BLUES +#define t1_blend_standard_widths T1_BLEND_STANDARD_WIDTH +#define t1_blend_standard_height T1_BLEND_STANDARD_HEIGHT +#define t1_blend_stem_snap_widths T1_BLEND_STEM_SNAP_WIDTHS +#define t1_blend_stem_snap_heights T1_BLEND_STEM_SNAP_HEIGHTS +#define t1_blend_blue_scale T1_BLEND_BLUE_SCALE +#define t1_blend_blue_shift T1_BLEND_BLUE_SHIFT +#define t1_blend_family_blues T1_BLEND_FAMILY_BLUES +#define t1_blend_family_other_blues T1_BLEND_FAMILY_OTHER_BLUES +#define t1_blend_force_bold T1_BLEND_FORCE_BOLD +#define t1_blend_max T1_BLEND_MAX + + /* */ + + + /************************************************************************** + * + * @struct: + * CID_FaceDictRec + * + * @description: + * A structure used to represent data in a CID top-level dictionary. In + * most cases, they are part of the font's '/FDArray' array. Within a + * CID font file, such (internal) subfont dictionaries are enclosed by + * '%ADOBeginFontDict' and '%ADOEndFontDict' comments. + * + * Note that `CID_FaceDictRec` misses a field for the '/FontName' + * keyword, specifying the subfont's name (the top-level font name is + * given by the '/CIDFontName' keyword). This is an oversight, but it + * doesn't limit the 'cid' font module's functionality because FreeType + * neither needs this entry nor gives access to CID subfonts. + */ + typedef struct CID_FaceDictRec_ + { + PS_PrivateRec private_dict; + + FT_UInt len_buildchar; + FT_Fixed forcebold_threshold; + FT_Pos stroke_width; + FT_Fixed expansion_factor; /* this is a duplicate of */ + /* `private_dict->expansion_factor' */ + FT_Byte paint_type; + FT_Byte font_type; + FT_Matrix font_matrix; + FT_Vector font_offset; + + FT_UInt num_subrs; + FT_ULong subrmap_offset; + FT_UInt sd_bytes; + + } CID_FaceDictRec; + + + /************************************************************************** + * + * @struct: + * CID_FaceDict + * + * @description: + * A handle to a @CID_FaceDictRec structure. + */ + typedef struct CID_FaceDictRec_* CID_FaceDict; + + + /************************************************************************** + * + * @struct: + * CID_FontDict + * + * @description: + * This type is equivalent to @CID_FaceDictRec. It is deprecated but + * kept to maintain source compatibility between various versions of + * FreeType. + */ + typedef CID_FaceDictRec CID_FontDict; + + + /************************************************************************** + * + * @struct: + * CID_FaceInfoRec + * + * @description: + * A structure used to represent CID Face information. + */ + typedef struct CID_FaceInfoRec_ + { + FT_String* cid_font_name; + FT_Fixed cid_version; + FT_Int cid_font_type; + + FT_String* registry; + FT_String* ordering; + FT_Int supplement; + + PS_FontInfoRec font_info; + FT_BBox font_bbox; + FT_ULong uid_base; + + FT_Int num_xuid; + FT_ULong xuid[16]; + + FT_ULong cidmap_offset; + FT_UInt fd_bytes; + FT_UInt gd_bytes; + FT_ULong cid_count; + + FT_UInt num_dicts; + CID_FaceDict font_dicts; + + FT_ULong data_offset; + + } CID_FaceInfoRec; + + + /************************************************************************** + * + * @struct: + * CID_FaceInfo + * + * @description: + * A handle to a @CID_FaceInfoRec structure. + */ + typedef struct CID_FaceInfoRec_* CID_FaceInfo; + + + /************************************************************************** + * + * @struct: + * CID_Info + * + * @description: + * This type is equivalent to @CID_FaceInfoRec. It is deprecated but kept + * to maintain source compatibility between various versions of FreeType. + */ + typedef CID_FaceInfoRec CID_Info; + + + /************************************************************************** + * + * @function: + * FT_Has_PS_Glyph_Names + * + * @description: + * Return true if a given face provides reliable PostScript glyph names. + * This is similar to using the @FT_HAS_GLYPH_NAMES macro, except that + * certain fonts (mostly TrueType) contain incorrect glyph name tables. + * + * When this function returns true, the caller is sure that the glyph + * names returned by @FT_Get_Glyph_Name are reliable. + * + * @input: + * face :: + * face handle + * + * @return: + * Boolean. True if glyph names are reliable. + * + */ + FT_EXPORT( FT_Int ) + FT_Has_PS_Glyph_Names( FT_Face face ); + + + /************************************************************************** + * + * @function: + * FT_Get_PS_Font_Info + * + * @description: + * Retrieve the @PS_FontInfoRec structure corresponding to a given + * PostScript font. + * + * @input: + * face :: + * PostScript face handle. + * + * @output: + * afont_info :: + * A pointer to a @PS_FontInfoRec object. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * String pointers within the @PS_FontInfoRec structure are owned by the + * face and don't need to be freed by the caller. Missing entries in the + * font's FontInfo dictionary are represented by `NULL` pointers. + * + * The following font formats support this feature: 'Type~1', 'Type~42', + * 'CFF', 'CID~Type~1'. For other font formats this function returns the + * `FT_Err_Invalid_Argument` error code. + * + * @example: + * ``` + * PS_FontInfoRec font_info; + * + * + * error = FT_Get_PS_Font_Info( face, &font_info ); + * ... + * ``` + * + */ + FT_EXPORT( FT_Error ) + FT_Get_PS_Font_Info( FT_Face face, + PS_FontInfo afont_info ); + + + /************************************************************************** + * + * @function: + * FT_Get_PS_Font_Private + * + * @description: + * Retrieve the @PS_PrivateRec structure corresponding to a given + * PostScript font. + * + * @input: + * face :: + * PostScript face handle. + * + * @output: + * afont_private :: + * A pointer to a @PS_PrivateRec object. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * The string pointers within the @PS_PrivateRec structure are owned by + * the face and don't need to be freed by the caller. + * + * Only the 'Type~1' font format supports this feature. For other font + * formats this function returns the `FT_Err_Invalid_Argument` error + * code. + * + * @example: + * ``` + * PS_PrivateRec font_private; + * + * + * error = FT_Get_PS_Font_Private( face, &font_private ); + * ... + * ``` + * + */ + FT_EXPORT( FT_Error ) + FT_Get_PS_Font_Private( FT_Face face, + PS_Private afont_private ); + + + /************************************************************************** + * + * @enum: + * T1_EncodingType + * + * @description: + * An enumeration describing the 'Encoding' entry in a Type 1 dictionary. + * + * @values: + * T1_ENCODING_TYPE_NONE :: + * T1_ENCODING_TYPE_ARRAY :: + * T1_ENCODING_TYPE_STANDARD :: + * T1_ENCODING_TYPE_ISOLATIN1 :: + * T1_ENCODING_TYPE_EXPERT :: + * + * @since: + * 2.4.8 + */ + typedef enum T1_EncodingType_ + { + T1_ENCODING_TYPE_NONE = 0, + T1_ENCODING_TYPE_ARRAY, + T1_ENCODING_TYPE_STANDARD, + T1_ENCODING_TYPE_ISOLATIN1, + T1_ENCODING_TYPE_EXPERT + + } T1_EncodingType; + + + /************************************************************************** + * + * @enum: + * PS_Dict_Keys + * + * @description: + * An enumeration used in calls to @FT_Get_PS_Font_Value to identify the + * Type~1 dictionary entry to retrieve. + * + * @values: + * PS_DICT_FONT_TYPE :: + * PS_DICT_FONT_MATRIX :: + * PS_DICT_FONT_BBOX :: + * PS_DICT_PAINT_TYPE :: + * PS_DICT_FONT_NAME :: + * PS_DICT_UNIQUE_ID :: + * PS_DICT_NUM_CHAR_STRINGS :: + * PS_DICT_CHAR_STRING_KEY :: + * PS_DICT_CHAR_STRING :: + * PS_DICT_ENCODING_TYPE :: + * PS_DICT_ENCODING_ENTRY :: + * PS_DICT_NUM_SUBRS :: + * PS_DICT_SUBR :: + * PS_DICT_STD_HW :: + * PS_DICT_STD_VW :: + * PS_DICT_NUM_BLUE_VALUES :: + * PS_DICT_BLUE_VALUE :: + * PS_DICT_BLUE_FUZZ :: + * PS_DICT_NUM_OTHER_BLUES :: + * PS_DICT_OTHER_BLUE :: + * PS_DICT_NUM_FAMILY_BLUES :: + * PS_DICT_FAMILY_BLUE :: + * PS_DICT_NUM_FAMILY_OTHER_BLUES :: + * PS_DICT_FAMILY_OTHER_BLUE :: + * PS_DICT_BLUE_SCALE :: + * PS_DICT_BLUE_SHIFT :: + * PS_DICT_NUM_STEM_SNAP_H :: + * PS_DICT_STEM_SNAP_H :: + * PS_DICT_NUM_STEM_SNAP_V :: + * PS_DICT_STEM_SNAP_V :: + * PS_DICT_FORCE_BOLD :: + * PS_DICT_RND_STEM_UP :: + * PS_DICT_MIN_FEATURE :: + * PS_DICT_LEN_IV :: + * PS_DICT_PASSWORD :: + * PS_DICT_LANGUAGE_GROUP :: + * PS_DICT_VERSION :: + * PS_DICT_NOTICE :: + * PS_DICT_FULL_NAME :: + * PS_DICT_FAMILY_NAME :: + * PS_DICT_WEIGHT :: + * PS_DICT_IS_FIXED_PITCH :: + * PS_DICT_UNDERLINE_POSITION :: + * PS_DICT_UNDERLINE_THICKNESS :: + * PS_DICT_FS_TYPE :: + * PS_DICT_ITALIC_ANGLE :: + * + * @since: + * 2.4.8 + */ + typedef enum PS_Dict_Keys_ + { + /* conventionally in the font dictionary */ + PS_DICT_FONT_TYPE, /* FT_Byte */ + PS_DICT_FONT_MATRIX, /* FT_Fixed */ + PS_DICT_FONT_BBOX, /* FT_Fixed */ + PS_DICT_PAINT_TYPE, /* FT_Byte */ + PS_DICT_FONT_NAME, /* FT_String* */ + PS_DICT_UNIQUE_ID, /* FT_Int */ + PS_DICT_NUM_CHAR_STRINGS, /* FT_Int */ + PS_DICT_CHAR_STRING_KEY, /* FT_String* */ + PS_DICT_CHAR_STRING, /* FT_String* */ + PS_DICT_ENCODING_TYPE, /* T1_EncodingType */ + PS_DICT_ENCODING_ENTRY, /* FT_String* */ + + /* conventionally in the font Private dictionary */ + PS_DICT_NUM_SUBRS, /* FT_Int */ + PS_DICT_SUBR, /* FT_String* */ + PS_DICT_STD_HW, /* FT_UShort */ + PS_DICT_STD_VW, /* FT_UShort */ + PS_DICT_NUM_BLUE_VALUES, /* FT_Byte */ + PS_DICT_BLUE_VALUE, /* FT_Short */ + PS_DICT_BLUE_FUZZ, /* FT_Int */ + PS_DICT_NUM_OTHER_BLUES, /* FT_Byte */ + PS_DICT_OTHER_BLUE, /* FT_Short */ + PS_DICT_NUM_FAMILY_BLUES, /* FT_Byte */ + PS_DICT_FAMILY_BLUE, /* FT_Short */ + PS_DICT_NUM_FAMILY_OTHER_BLUES, /* FT_Byte */ + PS_DICT_FAMILY_OTHER_BLUE, /* FT_Short */ + PS_DICT_BLUE_SCALE, /* FT_Fixed */ + PS_DICT_BLUE_SHIFT, /* FT_Int */ + PS_DICT_NUM_STEM_SNAP_H, /* FT_Byte */ + PS_DICT_STEM_SNAP_H, /* FT_Short */ + PS_DICT_NUM_STEM_SNAP_V, /* FT_Byte */ + PS_DICT_STEM_SNAP_V, /* FT_Short */ + PS_DICT_FORCE_BOLD, /* FT_Bool */ + PS_DICT_RND_STEM_UP, /* FT_Bool */ + PS_DICT_MIN_FEATURE, /* FT_Short */ + PS_DICT_LEN_IV, /* FT_Int */ + PS_DICT_PASSWORD, /* FT_Long */ + PS_DICT_LANGUAGE_GROUP, /* FT_Long */ + + /* conventionally in the font FontInfo dictionary */ + PS_DICT_VERSION, /* FT_String* */ + PS_DICT_NOTICE, /* FT_String* */ + PS_DICT_FULL_NAME, /* FT_String* */ + PS_DICT_FAMILY_NAME, /* FT_String* */ + PS_DICT_WEIGHT, /* FT_String* */ + PS_DICT_IS_FIXED_PITCH, /* FT_Bool */ + PS_DICT_UNDERLINE_POSITION, /* FT_Short */ + PS_DICT_UNDERLINE_THICKNESS, /* FT_UShort */ + PS_DICT_FS_TYPE, /* FT_UShort */ + PS_DICT_ITALIC_ANGLE, /* FT_Long */ + + PS_DICT_MAX = PS_DICT_ITALIC_ANGLE + + } PS_Dict_Keys; + + + /************************************************************************** + * + * @function: + * FT_Get_PS_Font_Value + * + * @description: + * Retrieve the value for the supplied key from a PostScript font. + * + * @input: + * face :: + * PostScript face handle. + * + * key :: + * An enumeration value representing the dictionary key to retrieve. + * + * idx :: + * For array values, this specifies the index to be returned. + * + * value :: + * A pointer to memory into which to write the value. + * + * valen_len :: + * The size, in bytes, of the memory supplied for the value. + * + * @output: + * value :: + * The value matching the above key, if it exists. + * + * @return: + * The amount of memory (in bytes) required to hold the requested value + * (if it exists, -1 otherwise). + * + * @note: + * The values returned are not pointers into the internal structures of + * the face, but are 'fresh' copies, so that the memory containing them + * belongs to the calling application. This also enforces the + * 'read-only' nature of these values, i.e., this function cannot be + * used to manipulate the face. + * + * `value` is a void pointer because the values returned can be of + * various types. + * + * If either `value` is `NULL` or `value_len` is too small, just the + * required memory size for the requested entry is returned. + * + * The `idx` parameter is used, not only to retrieve elements of, for + * example, the FontMatrix or FontBBox, but also to retrieve name keys + * from the CharStrings dictionary, and the charstrings themselves. It + * is ignored for atomic values. + * + * `PS_DICT_BLUE_SCALE` returns a value that is scaled up by 1000. To + * get the value as in the font stream, you need to divide by 65536000.0 + * (to remove the FT_Fixed scale, and the x1000 scale). + * + * IMPORTANT: Only key/value pairs read by the FreeType interpreter can + * be retrieved. So, for example, PostScript procedures such as NP, ND, + * and RD are not available. Arbitrary keys are, obviously, not be + * available either. + * + * If the font's format is not PostScript-based, this function returns + * the `FT_Err_Invalid_Argument` error code. + * + * @since: + * 2.4.8 + * + */ + FT_EXPORT( FT_Long ) + FT_Get_PS_Font_Value( FT_Face face, + PS_Dict_Keys key, + FT_UInt idx, + void *value, + FT_Long value_len ); + + /* */ + +FT_END_HEADER + +#endif /* T1TABLES_H_ */ + + +/* END */ diff --git a/dependencies/winx64/include/freetype2/freetype/ttnameid.h b/dependencies/winx64/include/freetype2/freetype/ttnameid.h new file mode 100644 index 0000000..0beeca2 --- /dev/null +++ b/dependencies/winx64/include/freetype2/freetype/ttnameid.h @@ -0,0 +1,1235 @@ +/**************************************************************************** + * + * ttnameid.h + * + * TrueType name ID definitions (specification only). + * + * Copyright (C) 1996-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + +#ifndef TTNAMEID_H_ +#define TTNAMEID_H_ + + + + +FT_BEGIN_HEADER + + + /************************************************************************** + * + * @section: + * truetype_tables + */ + + + /************************************************************************** + * + * Possible values for the 'platform' identifier code in the name records + * of an SFNT 'name' table. + * + */ + + + /************************************************************************** + * + * @enum: + * TT_PLATFORM_XXX + * + * @description: + * A list of valid values for the `platform_id` identifier code in + * @FT_CharMapRec and @FT_SfntName structures. + * + * @values: + * TT_PLATFORM_APPLE_UNICODE :: + * Used by Apple to indicate a Unicode character map and/or name entry. + * See @TT_APPLE_ID_XXX for corresponding `encoding_id` values. Note + * that name entries in this format are coded as big-endian UCS-2 + * character codes _only_. + * + * TT_PLATFORM_MACINTOSH :: + * Used by Apple to indicate a MacOS-specific charmap and/or name + * entry. See @TT_MAC_ID_XXX for corresponding `encoding_id` values. + * Note that most TrueType fonts contain an Apple roman charmap to be + * usable on MacOS systems (even if they contain a Microsoft charmap as + * well). + * + * TT_PLATFORM_ISO :: + * This value was used to specify ISO/IEC 10646 charmaps. It is + * however now deprecated. See @TT_ISO_ID_XXX for a list of + * corresponding `encoding_id` values. + * + * TT_PLATFORM_MICROSOFT :: + * Used by Microsoft to indicate Windows-specific charmaps. See + * @TT_MS_ID_XXX for a list of corresponding `encoding_id` values. + * Note that most fonts contain a Unicode charmap using + * (`TT_PLATFORM_MICROSOFT`, @TT_MS_ID_UNICODE_CS). + * + * TT_PLATFORM_CUSTOM :: + * Used to indicate application-specific charmaps. + * + * TT_PLATFORM_ADOBE :: + * This value isn't part of any font format specification, but is used + * by FreeType to report Adobe-specific charmaps in an @FT_CharMapRec + * structure. See @TT_ADOBE_ID_XXX. + */ + +#define TT_PLATFORM_APPLE_UNICODE 0 +#define TT_PLATFORM_MACINTOSH 1 +#define TT_PLATFORM_ISO 2 /* deprecated */ +#define TT_PLATFORM_MICROSOFT 3 +#define TT_PLATFORM_CUSTOM 4 +#define TT_PLATFORM_ADOBE 7 /* artificial */ + + + /************************************************************************** + * + * @enum: + * TT_APPLE_ID_XXX + * + * @description: + * A list of valid values for the `encoding_id` for + * @TT_PLATFORM_APPLE_UNICODE charmaps and name entries. + * + * @values: + * TT_APPLE_ID_DEFAULT :: + * Unicode version 1.0. + * + * TT_APPLE_ID_UNICODE_1_1 :: + * Unicode 1.1; specifies Hangul characters starting at U+34xx. + * + * TT_APPLE_ID_ISO_10646 :: + * Deprecated (identical to preceding). + * + * TT_APPLE_ID_UNICODE_2_0 :: + * Unicode 2.0 and beyond (UTF-16 BMP only). + * + * TT_APPLE_ID_UNICODE_32 :: + * Unicode 3.1 and beyond, using UTF-32. + * + * TT_APPLE_ID_VARIANT_SELECTOR :: + * From Adobe, not Apple. Not a normal cmap. Specifies variations on + * a real cmap. + * + * TT_APPLE_ID_FULL_UNICODE :: + * Used for fallback fonts that provide complete Unicode coverage with + * a type~13 cmap. + */ + +#define TT_APPLE_ID_DEFAULT 0 /* Unicode 1.0 */ +#define TT_APPLE_ID_UNICODE_1_1 1 /* specify Hangul at U+34xx */ +#define TT_APPLE_ID_ISO_10646 2 /* deprecated */ +#define TT_APPLE_ID_UNICODE_2_0 3 /* or later */ +#define TT_APPLE_ID_UNICODE_32 4 /* 2.0 or later, full repertoire */ +#define TT_APPLE_ID_VARIANT_SELECTOR 5 /* variation selector data */ +#define TT_APPLE_ID_FULL_UNICODE 6 /* used with type 13 cmaps */ + + + /************************************************************************** + * + * @enum: + * TT_MAC_ID_XXX + * + * @description: + * A list of valid values for the `encoding_id` for + * @TT_PLATFORM_MACINTOSH charmaps and name entries. + */ + +#define TT_MAC_ID_ROMAN 0 +#define TT_MAC_ID_JAPANESE 1 +#define TT_MAC_ID_TRADITIONAL_CHINESE 2 +#define TT_MAC_ID_KOREAN 3 +#define TT_MAC_ID_ARABIC 4 +#define TT_MAC_ID_HEBREW 5 +#define TT_MAC_ID_GREEK 6 +#define TT_MAC_ID_RUSSIAN 7 +#define TT_MAC_ID_RSYMBOL 8 +#define TT_MAC_ID_DEVANAGARI 9 +#define TT_MAC_ID_GURMUKHI 10 +#define TT_MAC_ID_GUJARATI 11 +#define TT_MAC_ID_ORIYA 12 +#define TT_MAC_ID_BENGALI 13 +#define TT_MAC_ID_TAMIL 14 +#define TT_MAC_ID_TELUGU 15 +#define TT_MAC_ID_KANNADA 16 +#define TT_MAC_ID_MALAYALAM 17 +#define TT_MAC_ID_SINHALESE 18 +#define TT_MAC_ID_BURMESE 19 +#define TT_MAC_ID_KHMER 20 +#define TT_MAC_ID_THAI 21 +#define TT_MAC_ID_LAOTIAN 22 +#define TT_MAC_ID_GEORGIAN 23 +#define TT_MAC_ID_ARMENIAN 24 +#define TT_MAC_ID_MALDIVIAN 25 +#define TT_MAC_ID_SIMPLIFIED_CHINESE 25 +#define TT_MAC_ID_TIBETAN 26 +#define TT_MAC_ID_MONGOLIAN 27 +#define TT_MAC_ID_GEEZ 28 +#define TT_MAC_ID_SLAVIC 29 +#define TT_MAC_ID_VIETNAMESE 30 +#define TT_MAC_ID_SINDHI 31 +#define TT_MAC_ID_UNINTERP 32 + + + /************************************************************************** + * + * @enum: + * TT_ISO_ID_XXX + * + * @description: + * A list of valid values for the `encoding_id` for @TT_PLATFORM_ISO + * charmaps and name entries. + * + * Their use is now deprecated. + * + * @values: + * TT_ISO_ID_7BIT_ASCII :: + * ASCII. + * TT_ISO_ID_10646 :: + * ISO/10646. + * TT_ISO_ID_8859_1 :: + * Also known as Latin-1. + */ + +#define TT_ISO_ID_7BIT_ASCII 0 +#define TT_ISO_ID_10646 1 +#define TT_ISO_ID_8859_1 2 + + + /************************************************************************** + * + * @enum: + * TT_MS_ID_XXX + * + * @description: + * A list of valid values for the `encoding_id` for + * @TT_PLATFORM_MICROSOFT charmaps and name entries. + * + * @values: + * TT_MS_ID_SYMBOL_CS :: + * Microsoft symbol encoding. See @FT_ENCODING_MS_SYMBOL. + * + * TT_MS_ID_UNICODE_CS :: + * Microsoft WGL4 charmap, matching Unicode. See @FT_ENCODING_UNICODE. + * + * TT_MS_ID_SJIS :: + * Shift JIS Japanese encoding. See @FT_ENCODING_SJIS. + * + * TT_MS_ID_PRC :: + * Chinese encodings as used in the People's Republic of China (PRC). + * This means the encodings GB~2312 and its supersets GBK and GB~18030. + * See @FT_ENCODING_PRC. + * + * TT_MS_ID_BIG_5 :: + * Traditional Chinese as used in Taiwan and Hong Kong. See + * @FT_ENCODING_BIG5. + * + * TT_MS_ID_WANSUNG :: + * Korean Extended Wansung encoding. See @FT_ENCODING_WANSUNG. + * + * TT_MS_ID_JOHAB :: + * Korean Johab encoding. See @FT_ENCODING_JOHAB. + * + * TT_MS_ID_UCS_4 :: + * UCS-4 or UTF-32 charmaps. This has been added to the OpenType + * specification version 1.4 (mid-2001). + */ + +#define TT_MS_ID_SYMBOL_CS 0 +#define TT_MS_ID_UNICODE_CS 1 +#define TT_MS_ID_SJIS 2 +#define TT_MS_ID_PRC 3 +#define TT_MS_ID_BIG_5 4 +#define TT_MS_ID_WANSUNG 5 +#define TT_MS_ID_JOHAB 6 +#define TT_MS_ID_UCS_4 10 + + /* this value is deprecated */ +#define TT_MS_ID_GB2312 TT_MS_ID_PRC + + + /************************************************************************** + * + * @enum: + * TT_ADOBE_ID_XXX + * + * @description: + * A list of valid values for the `encoding_id` for @TT_PLATFORM_ADOBE + * charmaps. This is a FreeType-specific extension! + * + * @values: + * TT_ADOBE_ID_STANDARD :: + * Adobe standard encoding. + * TT_ADOBE_ID_EXPERT :: + * Adobe expert encoding. + * TT_ADOBE_ID_CUSTOM :: + * Adobe custom encoding. + * TT_ADOBE_ID_LATIN_1 :: + * Adobe Latin~1 encoding. + */ + +#define TT_ADOBE_ID_STANDARD 0 +#define TT_ADOBE_ID_EXPERT 1 +#define TT_ADOBE_ID_CUSTOM 2 +#define TT_ADOBE_ID_LATIN_1 3 + + + /************************************************************************** + * + * @enum: + * TT_MAC_LANGID_XXX + * + * @description: + * Possible values of the language identifier field in the name records + * of the SFNT 'name' table if the 'platform' identifier code is + * @TT_PLATFORM_MACINTOSH. These values are also used as return values + * for function @FT_Get_CMap_Language_ID. + * + * The canonical source for Apple's IDs is + * + * https://developer.apple.com/fonts/TrueType-Reference-Manual/RM06/Chap6name.html + */ + +#define TT_MAC_LANGID_ENGLISH 0 +#define TT_MAC_LANGID_FRENCH 1 +#define TT_MAC_LANGID_GERMAN 2 +#define TT_MAC_LANGID_ITALIAN 3 +#define TT_MAC_LANGID_DUTCH 4 +#define TT_MAC_LANGID_SWEDISH 5 +#define TT_MAC_LANGID_SPANISH 6 +#define TT_MAC_LANGID_DANISH 7 +#define TT_MAC_LANGID_PORTUGUESE 8 +#define TT_MAC_LANGID_NORWEGIAN 9 +#define TT_MAC_LANGID_HEBREW 10 +#define TT_MAC_LANGID_JAPANESE 11 +#define TT_MAC_LANGID_ARABIC 12 +#define TT_MAC_LANGID_FINNISH 13 +#define TT_MAC_LANGID_GREEK 14 +#define TT_MAC_LANGID_ICELANDIC 15 +#define TT_MAC_LANGID_MALTESE 16 +#define TT_MAC_LANGID_TURKISH 17 +#define TT_MAC_LANGID_CROATIAN 18 +#define TT_MAC_LANGID_CHINESE_TRADITIONAL 19 +#define TT_MAC_LANGID_URDU 20 +#define TT_MAC_LANGID_HINDI 21 +#define TT_MAC_LANGID_THAI 22 +#define TT_MAC_LANGID_KOREAN 23 +#define TT_MAC_LANGID_LITHUANIAN 24 +#define TT_MAC_LANGID_POLISH 25 +#define TT_MAC_LANGID_HUNGARIAN 26 +#define TT_MAC_LANGID_ESTONIAN 27 +#define TT_MAC_LANGID_LETTISH 28 +#define TT_MAC_LANGID_SAAMISK 29 +#define TT_MAC_LANGID_FAEROESE 30 +#define TT_MAC_LANGID_FARSI 31 +#define TT_MAC_LANGID_RUSSIAN 32 +#define TT_MAC_LANGID_CHINESE_SIMPLIFIED 33 +#define TT_MAC_LANGID_FLEMISH 34 +#define TT_MAC_LANGID_IRISH 35 +#define TT_MAC_LANGID_ALBANIAN 36 +#define TT_MAC_LANGID_ROMANIAN 37 +#define TT_MAC_LANGID_CZECH 38 +#define TT_MAC_LANGID_SLOVAK 39 +#define TT_MAC_LANGID_SLOVENIAN 40 +#define TT_MAC_LANGID_YIDDISH 41 +#define TT_MAC_LANGID_SERBIAN 42 +#define TT_MAC_LANGID_MACEDONIAN 43 +#define TT_MAC_LANGID_BULGARIAN 44 +#define TT_MAC_LANGID_UKRAINIAN 45 +#define TT_MAC_LANGID_BYELORUSSIAN 46 +#define TT_MAC_LANGID_UZBEK 47 +#define TT_MAC_LANGID_KAZAKH 48 +#define TT_MAC_LANGID_AZERBAIJANI 49 +#define TT_MAC_LANGID_AZERBAIJANI_CYRILLIC_SCRIPT 49 +#define TT_MAC_LANGID_AZERBAIJANI_ARABIC_SCRIPT 50 +#define TT_MAC_LANGID_ARMENIAN 51 +#define TT_MAC_LANGID_GEORGIAN 52 +#define TT_MAC_LANGID_MOLDAVIAN 53 +#define TT_MAC_LANGID_KIRGHIZ 54 +#define TT_MAC_LANGID_TAJIKI 55 +#define TT_MAC_LANGID_TURKMEN 56 +#define TT_MAC_LANGID_MONGOLIAN 57 +#define TT_MAC_LANGID_MONGOLIAN_MONGOLIAN_SCRIPT 57 +#define TT_MAC_LANGID_MONGOLIAN_CYRILLIC_SCRIPT 58 +#define TT_MAC_LANGID_PASHTO 59 +#define TT_MAC_LANGID_KURDISH 60 +#define TT_MAC_LANGID_KASHMIRI 61 +#define TT_MAC_LANGID_SINDHI 62 +#define TT_MAC_LANGID_TIBETAN 63 +#define TT_MAC_LANGID_NEPALI 64 +#define TT_MAC_LANGID_SANSKRIT 65 +#define TT_MAC_LANGID_MARATHI 66 +#define TT_MAC_LANGID_BENGALI 67 +#define TT_MAC_LANGID_ASSAMESE 68 +#define TT_MAC_LANGID_GUJARATI 69 +#define TT_MAC_LANGID_PUNJABI 70 +#define TT_MAC_LANGID_ORIYA 71 +#define TT_MAC_LANGID_MALAYALAM 72 +#define TT_MAC_LANGID_KANNADA 73 +#define TT_MAC_LANGID_TAMIL 74 +#define TT_MAC_LANGID_TELUGU 75 +#define TT_MAC_LANGID_SINHALESE 76 +#define TT_MAC_LANGID_BURMESE 77 +#define TT_MAC_LANGID_KHMER 78 +#define TT_MAC_LANGID_LAO 79 +#define TT_MAC_LANGID_VIETNAMESE 80 +#define TT_MAC_LANGID_INDONESIAN 81 +#define TT_MAC_LANGID_TAGALOG 82 +#define TT_MAC_LANGID_MALAY_ROMAN_SCRIPT 83 +#define TT_MAC_LANGID_MALAY_ARABIC_SCRIPT 84 +#define TT_MAC_LANGID_AMHARIC 85 +#define TT_MAC_LANGID_TIGRINYA 86 +#define TT_MAC_LANGID_GALLA 87 +#define TT_MAC_LANGID_SOMALI 88 +#define TT_MAC_LANGID_SWAHILI 89 +#define TT_MAC_LANGID_RUANDA 90 +#define TT_MAC_LANGID_RUNDI 91 +#define TT_MAC_LANGID_CHEWA 92 +#define TT_MAC_LANGID_MALAGASY 93 +#define TT_MAC_LANGID_ESPERANTO 94 +#define TT_MAC_LANGID_WELSH 128 +#define TT_MAC_LANGID_BASQUE 129 +#define TT_MAC_LANGID_CATALAN 130 +#define TT_MAC_LANGID_LATIN 131 +#define TT_MAC_LANGID_QUECHUA 132 +#define TT_MAC_LANGID_GUARANI 133 +#define TT_MAC_LANGID_AYMARA 134 +#define TT_MAC_LANGID_TATAR 135 +#define TT_MAC_LANGID_UIGHUR 136 +#define TT_MAC_LANGID_DZONGKHA 137 +#define TT_MAC_LANGID_JAVANESE 138 +#define TT_MAC_LANGID_SUNDANESE 139 + + /* The following codes are new as of 2000-03-10 */ +#define TT_MAC_LANGID_GALICIAN 140 +#define TT_MAC_LANGID_AFRIKAANS 141 +#define TT_MAC_LANGID_BRETON 142 +#define TT_MAC_LANGID_INUKTITUT 143 +#define TT_MAC_LANGID_SCOTTISH_GAELIC 144 +#define TT_MAC_LANGID_MANX_GAELIC 145 +#define TT_MAC_LANGID_IRISH_GAELIC 146 +#define TT_MAC_LANGID_TONGAN 147 +#define TT_MAC_LANGID_GREEK_POLYTONIC 148 +#define TT_MAC_LANGID_GREELANDIC 149 +#define TT_MAC_LANGID_AZERBAIJANI_ROMAN_SCRIPT 150 + + + /************************************************************************** + * + * @enum: + * TT_MS_LANGID_XXX + * + * @description: + * Possible values of the language identifier field in the name records + * of the SFNT 'name' table if the 'platform' identifier code is + * @TT_PLATFORM_MICROSOFT. These values are also used as return values + * for function @FT_Get_CMap_Language_ID. + * + * The canonical source for Microsoft's IDs is + * + * https://learn.microsoft.com/windows/win32/intl/language-identifier-constants-and-strings , + * + * however, we only provide macros for language identifiers present in + * the OpenType specification: Microsoft has abandoned the concept of + * LCIDs (language code identifiers), and format~1 of the 'name' table + * provides a better mechanism for languages not covered here. + * + * More legacy values not listed in the reference can be found in the + * @FT_TRUETYPE_IDS_H header file. + */ + +#define TT_MS_LANGID_ARABIC_SAUDI_ARABIA 0x0401 +#define TT_MS_LANGID_ARABIC_IRAQ 0x0801 +#define TT_MS_LANGID_ARABIC_EGYPT 0x0C01 +#define TT_MS_LANGID_ARABIC_LIBYA 0x1001 +#define TT_MS_LANGID_ARABIC_ALGERIA 0x1401 +#define TT_MS_LANGID_ARABIC_MOROCCO 0x1801 +#define TT_MS_LANGID_ARABIC_TUNISIA 0x1C01 +#define TT_MS_LANGID_ARABIC_OMAN 0x2001 +#define TT_MS_LANGID_ARABIC_YEMEN 0x2401 +#define TT_MS_LANGID_ARABIC_SYRIA 0x2801 +#define TT_MS_LANGID_ARABIC_JORDAN 0x2C01 +#define TT_MS_LANGID_ARABIC_LEBANON 0x3001 +#define TT_MS_LANGID_ARABIC_KUWAIT 0x3401 +#define TT_MS_LANGID_ARABIC_UAE 0x3801 +#define TT_MS_LANGID_ARABIC_BAHRAIN 0x3C01 +#define TT_MS_LANGID_ARABIC_QATAR 0x4001 +#define TT_MS_LANGID_BULGARIAN_BULGARIA 0x0402 +#define TT_MS_LANGID_CATALAN_CATALAN 0x0403 +#define TT_MS_LANGID_CHINESE_TAIWAN 0x0404 +#define TT_MS_LANGID_CHINESE_PRC 0x0804 +#define TT_MS_LANGID_CHINESE_HONG_KONG 0x0C04 +#define TT_MS_LANGID_CHINESE_SINGAPORE 0x1004 +#define TT_MS_LANGID_CHINESE_MACAO 0x1404 +#define TT_MS_LANGID_CZECH_CZECH_REPUBLIC 0x0405 +#define TT_MS_LANGID_DANISH_DENMARK 0x0406 +#define TT_MS_LANGID_GERMAN_GERMANY 0x0407 +#define TT_MS_LANGID_GERMAN_SWITZERLAND 0x0807 +#define TT_MS_LANGID_GERMAN_AUSTRIA 0x0C07 +#define TT_MS_LANGID_GERMAN_LUXEMBOURG 0x1007 +#define TT_MS_LANGID_GERMAN_LIECHTENSTEIN 0x1407 +#define TT_MS_LANGID_GREEK_GREECE 0x0408 +#define TT_MS_LANGID_ENGLISH_UNITED_STATES 0x0409 +#define TT_MS_LANGID_ENGLISH_UNITED_KINGDOM 0x0809 +#define TT_MS_LANGID_ENGLISH_AUSTRALIA 0x0C09 +#define TT_MS_LANGID_ENGLISH_CANADA 0x1009 +#define TT_MS_LANGID_ENGLISH_NEW_ZEALAND 0x1409 +#define TT_MS_LANGID_ENGLISH_IRELAND 0x1809 +#define TT_MS_LANGID_ENGLISH_SOUTH_AFRICA 0x1C09 +#define TT_MS_LANGID_ENGLISH_JAMAICA 0x2009 +#define TT_MS_LANGID_ENGLISH_CARIBBEAN 0x2409 +#define TT_MS_LANGID_ENGLISH_BELIZE 0x2809 +#define TT_MS_LANGID_ENGLISH_TRINIDAD 0x2C09 +#define TT_MS_LANGID_ENGLISH_ZIMBABWE 0x3009 +#define TT_MS_LANGID_ENGLISH_PHILIPPINES 0x3409 +#define TT_MS_LANGID_ENGLISH_INDIA 0x4009 +#define TT_MS_LANGID_ENGLISH_MALAYSIA 0x4409 +#define TT_MS_LANGID_ENGLISH_SINGAPORE 0x4809 +#define TT_MS_LANGID_SPANISH_SPAIN_TRADITIONAL_SORT 0x040A +#define TT_MS_LANGID_SPANISH_MEXICO 0x080A +#define TT_MS_LANGID_SPANISH_SPAIN_MODERN_SORT 0x0C0A +#define TT_MS_LANGID_SPANISH_GUATEMALA 0x100A +#define TT_MS_LANGID_SPANISH_COSTA_RICA 0x140A +#define TT_MS_LANGID_SPANISH_PANAMA 0x180A +#define TT_MS_LANGID_SPANISH_DOMINICAN_REPUBLIC 0x1C0A +#define TT_MS_LANGID_SPANISH_VENEZUELA 0x200A +#define TT_MS_LANGID_SPANISH_COLOMBIA 0x240A +#define TT_MS_LANGID_SPANISH_PERU 0x280A +#define TT_MS_LANGID_SPANISH_ARGENTINA 0x2C0A +#define TT_MS_LANGID_SPANISH_ECUADOR 0x300A +#define TT_MS_LANGID_SPANISH_CHILE 0x340A +#define TT_MS_LANGID_SPANISH_URUGUAY 0x380A +#define TT_MS_LANGID_SPANISH_PARAGUAY 0x3C0A +#define TT_MS_LANGID_SPANISH_BOLIVIA 0x400A +#define TT_MS_LANGID_SPANISH_EL_SALVADOR 0x440A +#define TT_MS_LANGID_SPANISH_HONDURAS 0x480A +#define TT_MS_LANGID_SPANISH_NICARAGUA 0x4C0A +#define TT_MS_LANGID_SPANISH_PUERTO_RICO 0x500A +#define TT_MS_LANGID_SPANISH_UNITED_STATES 0x540A +#define TT_MS_LANGID_FINNISH_FINLAND 0x040B +#define TT_MS_LANGID_FRENCH_FRANCE 0x040C +#define TT_MS_LANGID_FRENCH_BELGIUM 0x080C +#define TT_MS_LANGID_FRENCH_CANADA 0x0C0C +#define TT_MS_LANGID_FRENCH_SWITZERLAND 0x100C +#define TT_MS_LANGID_FRENCH_LUXEMBOURG 0x140C +#define TT_MS_LANGID_FRENCH_MONACO 0x180C +#define TT_MS_LANGID_HEBREW_ISRAEL 0x040D +#define TT_MS_LANGID_HUNGARIAN_HUNGARY 0x040E +#define TT_MS_LANGID_ICELANDIC_ICELAND 0x040F +#define TT_MS_LANGID_ITALIAN_ITALY 0x0410 +#define TT_MS_LANGID_ITALIAN_SWITZERLAND 0x0810 +#define TT_MS_LANGID_JAPANESE_JAPAN 0x0411 +#define TT_MS_LANGID_KOREAN_KOREA 0x0412 +#define TT_MS_LANGID_DUTCH_NETHERLANDS 0x0413 +#define TT_MS_LANGID_DUTCH_BELGIUM 0x0813 +#define TT_MS_LANGID_NORWEGIAN_NORWAY_BOKMAL 0x0414 +#define TT_MS_LANGID_NORWEGIAN_NORWAY_NYNORSK 0x0814 +#define TT_MS_LANGID_POLISH_POLAND 0x0415 +#define TT_MS_LANGID_PORTUGUESE_BRAZIL 0x0416 +#define TT_MS_LANGID_PORTUGUESE_PORTUGAL 0x0816 +#define TT_MS_LANGID_ROMANSH_SWITZERLAND 0x0417 +#define TT_MS_LANGID_ROMANIAN_ROMANIA 0x0418 +#define TT_MS_LANGID_RUSSIAN_RUSSIA 0x0419 +#define TT_MS_LANGID_CROATIAN_CROATIA 0x041A +#define TT_MS_LANGID_SERBIAN_SERBIA_LATIN 0x081A +#define TT_MS_LANGID_SERBIAN_SERBIA_CYRILLIC 0x0C1A +#define TT_MS_LANGID_CROATIAN_BOSNIA_HERZEGOVINA 0x101A +#define TT_MS_LANGID_BOSNIAN_BOSNIA_HERZEGOVINA 0x141A +#define TT_MS_LANGID_SERBIAN_BOSNIA_HERZ_LATIN 0x181A +#define TT_MS_LANGID_SERBIAN_BOSNIA_HERZ_CYRILLIC 0x1C1A +#define TT_MS_LANGID_BOSNIAN_BOSNIA_HERZ_CYRILLIC 0x201A +#define TT_MS_LANGID_SLOVAK_SLOVAKIA 0x041B +#define TT_MS_LANGID_ALBANIAN_ALBANIA 0x041C +#define TT_MS_LANGID_SWEDISH_SWEDEN 0x041D +#define TT_MS_LANGID_SWEDISH_FINLAND 0x081D +#define TT_MS_LANGID_THAI_THAILAND 0x041E +#define TT_MS_LANGID_TURKISH_TURKEY 0x041F +#define TT_MS_LANGID_URDU_PAKISTAN 0x0420 +#define TT_MS_LANGID_INDONESIAN_INDONESIA 0x0421 +#define TT_MS_LANGID_UKRAINIAN_UKRAINE 0x0422 +#define TT_MS_LANGID_BELARUSIAN_BELARUS 0x0423 +#define TT_MS_LANGID_SLOVENIAN_SLOVENIA 0x0424 +#define TT_MS_LANGID_ESTONIAN_ESTONIA 0x0425 +#define TT_MS_LANGID_LATVIAN_LATVIA 0x0426 +#define TT_MS_LANGID_LITHUANIAN_LITHUANIA 0x0427 +#define TT_MS_LANGID_TAJIK_TAJIKISTAN 0x0428 +#define TT_MS_LANGID_VIETNAMESE_VIET_NAM 0x042A +#define TT_MS_LANGID_ARMENIAN_ARMENIA 0x042B +#define TT_MS_LANGID_AZERI_AZERBAIJAN_LATIN 0x042C +#define TT_MS_LANGID_AZERI_AZERBAIJAN_CYRILLIC 0x082C +#define TT_MS_LANGID_BASQUE_BASQUE 0x042D +#define TT_MS_LANGID_UPPER_SORBIAN_GERMANY 0x042E +#define TT_MS_LANGID_LOWER_SORBIAN_GERMANY 0x082E +#define TT_MS_LANGID_MACEDONIAN_MACEDONIA 0x042F +#define TT_MS_LANGID_SETSWANA_SOUTH_AFRICA 0x0432 +#define TT_MS_LANGID_ISIXHOSA_SOUTH_AFRICA 0x0434 +#define TT_MS_LANGID_ISIZULU_SOUTH_AFRICA 0x0435 +#define TT_MS_LANGID_AFRIKAANS_SOUTH_AFRICA 0x0436 +#define TT_MS_LANGID_GEORGIAN_GEORGIA 0x0437 +#define TT_MS_LANGID_FAEROESE_FAEROE_ISLANDS 0x0438 +#define TT_MS_LANGID_HINDI_INDIA 0x0439 +#define TT_MS_LANGID_MALTESE_MALTA 0x043A +#define TT_MS_LANGID_SAMI_NORTHERN_NORWAY 0x043B +#define TT_MS_LANGID_SAMI_NORTHERN_SWEDEN 0x083B +#define TT_MS_LANGID_SAMI_NORTHERN_FINLAND 0x0C3B +#define TT_MS_LANGID_SAMI_LULE_NORWAY 0x103B +#define TT_MS_LANGID_SAMI_LULE_SWEDEN 0x143B +#define TT_MS_LANGID_SAMI_SOUTHERN_NORWAY 0x183B +#define TT_MS_LANGID_SAMI_SOUTHERN_SWEDEN 0x1C3B +#define TT_MS_LANGID_SAMI_SKOLT_FINLAND 0x203B +#define TT_MS_LANGID_SAMI_INARI_FINLAND 0x243B +#define TT_MS_LANGID_IRISH_IRELAND 0x083C +#define TT_MS_LANGID_MALAY_MALAYSIA 0x043E +#define TT_MS_LANGID_MALAY_BRUNEI_DARUSSALAM 0x083E +#define TT_MS_LANGID_KAZAKH_KAZAKHSTAN 0x043F +#define TT_MS_LANGID_KYRGYZ_KYRGYZSTAN /* Cyrillic */ 0x0440 +#define TT_MS_LANGID_KISWAHILI_KENYA 0x0441 +#define TT_MS_LANGID_TURKMEN_TURKMENISTAN 0x0442 +#define TT_MS_LANGID_UZBEK_UZBEKISTAN_LATIN 0x0443 +#define TT_MS_LANGID_UZBEK_UZBEKISTAN_CYRILLIC 0x0843 +#define TT_MS_LANGID_TATAR_RUSSIA 0x0444 +#define TT_MS_LANGID_BENGALI_INDIA 0x0445 +#define TT_MS_LANGID_BENGALI_BANGLADESH 0x0845 +#define TT_MS_LANGID_PUNJABI_INDIA 0x0446 +#define TT_MS_LANGID_GUJARATI_INDIA 0x0447 +#define TT_MS_LANGID_ODIA_INDIA 0x0448 +#define TT_MS_LANGID_TAMIL_INDIA 0x0449 +#define TT_MS_LANGID_TELUGU_INDIA 0x044A +#define TT_MS_LANGID_KANNADA_INDIA 0x044B +#define TT_MS_LANGID_MALAYALAM_INDIA 0x044C +#define TT_MS_LANGID_ASSAMESE_INDIA 0x044D +#define TT_MS_LANGID_MARATHI_INDIA 0x044E +#define TT_MS_LANGID_SANSKRIT_INDIA 0x044F +#define TT_MS_LANGID_MONGOLIAN_MONGOLIA /* Cyrillic */ 0x0450 +#define TT_MS_LANGID_MONGOLIAN_PRC 0x0850 +#define TT_MS_LANGID_TIBETAN_PRC 0x0451 +#define TT_MS_LANGID_WELSH_UNITED_KINGDOM 0x0452 +#define TT_MS_LANGID_KHMER_CAMBODIA 0x0453 +#define TT_MS_LANGID_LAO_LAOS 0x0454 +#define TT_MS_LANGID_GALICIAN_GALICIAN 0x0456 +#define TT_MS_LANGID_KONKANI_INDIA 0x0457 +#define TT_MS_LANGID_SYRIAC_SYRIA 0x045A +#define TT_MS_LANGID_SINHALA_SRI_LANKA 0x045B +#define TT_MS_LANGID_INUKTITUT_CANADA 0x045D +#define TT_MS_LANGID_INUKTITUT_CANADA_LATIN 0x085D +#define TT_MS_LANGID_AMHARIC_ETHIOPIA 0x045E +#define TT_MS_LANGID_TAMAZIGHT_ALGERIA 0x085F +#define TT_MS_LANGID_NEPALI_NEPAL 0x0461 +#define TT_MS_LANGID_FRISIAN_NETHERLANDS 0x0462 +#define TT_MS_LANGID_PASHTO_AFGHANISTAN 0x0463 +#define TT_MS_LANGID_FILIPINO_PHILIPPINES 0x0464 +#define TT_MS_LANGID_DHIVEHI_MALDIVES 0x0465 +#define TT_MS_LANGID_HAUSA_NIGERIA 0x0468 +#define TT_MS_LANGID_YORUBA_NIGERIA 0x046A +#define TT_MS_LANGID_QUECHUA_BOLIVIA 0x046B +#define TT_MS_LANGID_QUECHUA_ECUADOR 0x086B +#define TT_MS_LANGID_QUECHUA_PERU 0x0C6B +#define TT_MS_LANGID_SESOTHO_SA_LEBOA_SOUTH_AFRICA 0x046C +#define TT_MS_LANGID_BASHKIR_RUSSIA 0x046D +#define TT_MS_LANGID_LUXEMBOURGISH_LUXEMBOURG 0x046E +#define TT_MS_LANGID_GREENLANDIC_GREENLAND 0x046F +#define TT_MS_LANGID_IGBO_NIGERIA 0x0470 +#define TT_MS_LANGID_YI_PRC 0x0478 +#define TT_MS_LANGID_MAPUDUNGUN_CHILE 0x047A +#define TT_MS_LANGID_MOHAWK_MOHAWK 0x047C +#define TT_MS_LANGID_BRETON_FRANCE 0x047E +#define TT_MS_LANGID_UIGHUR_PRC 0x0480 +#define TT_MS_LANGID_MAORI_NEW_ZEALAND 0x0481 +#define TT_MS_LANGID_OCCITAN_FRANCE 0x0482 +#define TT_MS_LANGID_CORSICAN_FRANCE 0x0483 +#define TT_MS_LANGID_ALSATIAN_FRANCE 0x0484 +#define TT_MS_LANGID_YAKUT_RUSSIA 0x0485 +#define TT_MS_LANGID_KICHE_GUATEMALA 0x0486 +#define TT_MS_LANGID_KINYARWANDA_RWANDA 0x0487 +#define TT_MS_LANGID_WOLOF_SENEGAL 0x0488 +#define TT_MS_LANGID_DARI_AFGHANISTAN 0x048C + + /* */ + + + /* legacy macro definitions not present in OpenType 1.8.1 */ +#define TT_MS_LANGID_ARABIC_GENERAL 0x0001 +#define TT_MS_LANGID_CATALAN_SPAIN \ + TT_MS_LANGID_CATALAN_CATALAN +#define TT_MS_LANGID_CHINESE_GENERAL 0x0004 +#define TT_MS_LANGID_CHINESE_MACAU \ + TT_MS_LANGID_CHINESE_MACAO +#define TT_MS_LANGID_GERMAN_LIECHTENSTEI \ + TT_MS_LANGID_GERMAN_LIECHTENSTEIN +#define TT_MS_LANGID_ENGLISH_GENERAL 0x0009 +#define TT_MS_LANGID_ENGLISH_INDONESIA 0x3809 +#define TT_MS_LANGID_ENGLISH_HONG_KONG 0x3C09 +#define TT_MS_LANGID_SPANISH_SPAIN_INTERNATIONAL_SORT \ + TT_MS_LANGID_SPANISH_SPAIN_MODERN_SORT +#define TT_MS_LANGID_SPANISH_LATIN_AMERICA 0xE40AU +#define TT_MS_LANGID_FRENCH_WEST_INDIES 0x1C0C +#define TT_MS_LANGID_FRENCH_REUNION 0x200C +#define TT_MS_LANGID_FRENCH_CONGO 0x240C + /* which was formerly: */ +#define TT_MS_LANGID_FRENCH_ZAIRE \ + TT_MS_LANGID_FRENCH_CONGO +#define TT_MS_LANGID_FRENCH_SENEGAL 0x280C +#define TT_MS_LANGID_FRENCH_CAMEROON 0x2C0C +#define TT_MS_LANGID_FRENCH_COTE_D_IVOIRE 0x300C +#define TT_MS_LANGID_FRENCH_MALI 0x340C +#define TT_MS_LANGID_FRENCH_MOROCCO 0x380C +#define TT_MS_LANGID_FRENCH_HAITI 0x3C0C +#define TT_MS_LANGID_FRENCH_NORTH_AFRICA 0xE40CU +#define TT_MS_LANGID_KOREAN_EXTENDED_WANSUNG_KOREA \ + TT_MS_LANGID_KOREAN_KOREA +#define TT_MS_LANGID_KOREAN_JOHAB_KOREA 0x0812 +#define TT_MS_LANGID_RHAETO_ROMANIC_SWITZERLAND \ + TT_MS_LANGID_ROMANSH_SWITZERLAND +#define TT_MS_LANGID_MOLDAVIAN_MOLDAVIA 0x0818 +#define TT_MS_LANGID_RUSSIAN_MOLDAVIA 0x0819 +#define TT_MS_LANGID_URDU_INDIA 0x0820 +#define TT_MS_LANGID_CLASSIC_LITHUANIAN_LITHUANIA 0x0827 +#define TT_MS_LANGID_SLOVENE_SLOVENIA \ + TT_MS_LANGID_SLOVENIAN_SLOVENIA +#define TT_MS_LANGID_FARSI_IRAN 0x0429 +#define TT_MS_LANGID_BASQUE_SPAIN \ + TT_MS_LANGID_BASQUE_BASQUE +#define TT_MS_LANGID_SORBIAN_GERMANY \ + TT_MS_LANGID_UPPER_SORBIAN_GERMANY +#define TT_MS_LANGID_SUTU_SOUTH_AFRICA 0x0430 +#define TT_MS_LANGID_TSONGA_SOUTH_AFRICA 0x0431 +#define TT_MS_LANGID_TSWANA_SOUTH_AFRICA \ + TT_MS_LANGID_SETSWANA_SOUTH_AFRICA +#define TT_MS_LANGID_VENDA_SOUTH_AFRICA 0x0433 +#define TT_MS_LANGID_XHOSA_SOUTH_AFRICA \ + TT_MS_LANGID_ISIXHOSA_SOUTH_AFRICA +#define TT_MS_LANGID_ZULU_SOUTH_AFRICA \ + TT_MS_LANGID_ISIZULU_SOUTH_AFRICA +#define TT_MS_LANGID_SAAMI_LAPONIA 0x043B + /* the next two values are incorrectly inverted */ +#define TT_MS_LANGID_IRISH_GAELIC_IRELAND 0x043C +#define TT_MS_LANGID_SCOTTISH_GAELIC_UNITED_KINGDOM 0x083C +#define TT_MS_LANGID_YIDDISH_GERMANY 0x043D +#define TT_MS_LANGID_KAZAK_KAZAKSTAN \ + TT_MS_LANGID_KAZAKH_KAZAKHSTAN +#define TT_MS_LANGID_KIRGHIZ_KIRGHIZ_REPUBLIC \ + TT_MS_LANGID_KYRGYZ_KYRGYZSTAN +#define TT_MS_LANGID_KIRGHIZ_KIRGHIZSTAN \ + TT_MS_LANGID_KYRGYZ_KYRGYZSTAN +#define TT_MS_LANGID_SWAHILI_KENYA \ + TT_MS_LANGID_KISWAHILI_KENYA +#define TT_MS_LANGID_TATAR_TATARSTAN \ + TT_MS_LANGID_TATAR_RUSSIA +#define TT_MS_LANGID_PUNJABI_ARABIC_PAKISTAN 0x0846 +#define TT_MS_LANGID_ORIYA_INDIA \ + TT_MS_LANGID_ODIA_INDIA +#define TT_MS_LANGID_MONGOLIAN_MONGOLIA_MONGOLIAN \ + TT_MS_LANGID_MONGOLIAN_PRC +#define TT_MS_LANGID_TIBETAN_CHINA \ + TT_MS_LANGID_TIBETAN_PRC +#define TT_MS_LANGID_DZONGHKA_BHUTAN 0x0851 +#define TT_MS_LANGID_TIBETAN_BHUTAN \ + TT_MS_LANGID_DZONGHKA_BHUTAN +#define TT_MS_LANGID_WELSH_WALES \ + TT_MS_LANGID_WELSH_UNITED_KINGDOM +#define TT_MS_LANGID_BURMESE_MYANMAR 0x0455 +#define TT_MS_LANGID_GALICIAN_SPAIN \ + TT_MS_LANGID_GALICIAN_GALICIAN +#define TT_MS_LANGID_MANIPURI_INDIA /* Bengali */ 0x0458 +#define TT_MS_LANGID_SINDHI_INDIA /* Arabic */ 0x0459 +#define TT_MS_LANGID_SINDHI_PAKISTAN 0x0859 +#define TT_MS_LANGID_SINHALESE_SRI_LANKA \ + TT_MS_LANGID_SINHALA_SRI_LANKA +#define TT_MS_LANGID_CHEROKEE_UNITED_STATES 0x045C +#define TT_MS_LANGID_TAMAZIGHT_MOROCCO /* Arabic */ 0x045F +#define TT_MS_LANGID_TAMAZIGHT_MOROCCO_LATIN \ + TT_MS_LANGID_TAMAZIGHT_ALGERIA +#define TT_MS_LANGID_KASHMIRI_PAKISTAN /* Arabic */ 0x0460 +#define TT_MS_LANGID_KASHMIRI_SASIA 0x0860 +#define TT_MS_LANGID_KASHMIRI_INDIA \ + TT_MS_LANGID_KASHMIRI_SASIA +#define TT_MS_LANGID_NEPALI_INDIA 0x0861 +#define TT_MS_LANGID_DIVEHI_MALDIVES \ + TT_MS_LANGID_DHIVEHI_MALDIVES +#define TT_MS_LANGID_EDO_NIGERIA 0x0466 +#define TT_MS_LANGID_FULFULDE_NIGERIA 0x0467 +#define TT_MS_LANGID_IBIBIO_NIGERIA 0x0469 +#define TT_MS_LANGID_SEPEDI_SOUTH_AFRICA \ + TT_MS_LANGID_SESOTHO_SA_LEBOA_SOUTH_AFRICA +#define TT_MS_LANGID_SOTHO_SOUTHERN_SOUTH_AFRICA \ + TT_MS_LANGID_SESOTHO_SA_LEBOA_SOUTH_AFRICA +#define TT_MS_LANGID_KANURI_NIGERIA 0x0471 +#define TT_MS_LANGID_OROMO_ETHIOPIA 0x0472 +#define TT_MS_LANGID_TIGRIGNA_ETHIOPIA 0x0473 +#define TT_MS_LANGID_TIGRIGNA_ERYTHREA 0x0873 +#define TT_MS_LANGID_TIGRIGNA_ERYTREA \ + TT_MS_LANGID_TIGRIGNA_ERYTHREA +#define TT_MS_LANGID_GUARANI_PARAGUAY 0x0474 +#define TT_MS_LANGID_HAWAIIAN_UNITED_STATES 0x0475 +#define TT_MS_LANGID_LATIN 0x0476 +#define TT_MS_LANGID_SOMALI_SOMALIA 0x0477 +#define TT_MS_LANGID_YI_CHINA \ + TT_MS_LANGID_YI_PRC +#define TT_MS_LANGID_PAPIAMENTU_NETHERLANDS_ANTILLES 0x0479 +#define TT_MS_LANGID_UIGHUR_CHINA \ + TT_MS_LANGID_UIGHUR_PRC + + + /************************************************************************** + * + * @enum: + * TT_NAME_ID_XXX + * + * @description: + * Possible values of the 'name' identifier field in the name records of + * an SFNT 'name' table. These values are platform independent. + */ + +#define TT_NAME_ID_COPYRIGHT 0 +#define TT_NAME_ID_FONT_FAMILY 1 +#define TT_NAME_ID_FONT_SUBFAMILY 2 +#define TT_NAME_ID_UNIQUE_ID 3 +#define TT_NAME_ID_FULL_NAME 4 +#define TT_NAME_ID_VERSION_STRING 5 +#define TT_NAME_ID_PS_NAME 6 +#define TT_NAME_ID_TRADEMARK 7 + + /* the following values are from the OpenType spec */ +#define TT_NAME_ID_MANUFACTURER 8 +#define TT_NAME_ID_DESIGNER 9 +#define TT_NAME_ID_DESCRIPTION 10 +#define TT_NAME_ID_VENDOR_URL 11 +#define TT_NAME_ID_DESIGNER_URL 12 +#define TT_NAME_ID_LICENSE 13 +#define TT_NAME_ID_LICENSE_URL 14 + /* number 15 is reserved */ +#define TT_NAME_ID_TYPOGRAPHIC_FAMILY 16 +#define TT_NAME_ID_TYPOGRAPHIC_SUBFAMILY 17 +#define TT_NAME_ID_MAC_FULL_NAME 18 + + /* The following code is new as of 2000-01-21 */ +#define TT_NAME_ID_SAMPLE_TEXT 19 + + /* This is new in OpenType 1.3 */ +#define TT_NAME_ID_CID_FINDFONT_NAME 20 + + /* This is new in OpenType 1.5 */ +#define TT_NAME_ID_WWS_FAMILY 21 +#define TT_NAME_ID_WWS_SUBFAMILY 22 + + /* This is new in OpenType 1.7 */ +#define TT_NAME_ID_LIGHT_BACKGROUND 23 +#define TT_NAME_ID_DARK_BACKGROUND 24 + + /* This is new in OpenType 1.8 */ +#define TT_NAME_ID_VARIATIONS_PREFIX 25 + + /* these two values are deprecated */ +#define TT_NAME_ID_PREFERRED_FAMILY TT_NAME_ID_TYPOGRAPHIC_FAMILY +#define TT_NAME_ID_PREFERRED_SUBFAMILY TT_NAME_ID_TYPOGRAPHIC_SUBFAMILY + + + /************************************************************************** + * + * @enum: + * TT_UCR_XXX + * + * @description: + * Possible bit mask values for the `ulUnicodeRangeX` fields in an SFNT + * 'OS/2' table. + */ + + /* ulUnicodeRange1 */ + /* --------------- */ + + /* Bit 0 Basic Latin */ +#define TT_UCR_BASIC_LATIN (1UL << 0) /* U+0020-U+007E */ + /* Bit 1 C1 Controls and Latin-1 Supplement */ +#define TT_UCR_LATIN1_SUPPLEMENT (1UL << 1) /* U+0080-U+00FF */ + /* Bit 2 Latin Extended-A */ +#define TT_UCR_LATIN_EXTENDED_A (1UL << 2) /* U+0100-U+017F */ + /* Bit 3 Latin Extended-B */ +#define TT_UCR_LATIN_EXTENDED_B (1UL << 3) /* U+0180-U+024F */ + /* Bit 4 IPA Extensions */ + /* Phonetic Extensions */ + /* Phonetic Extensions Supplement */ +#define TT_UCR_IPA_EXTENSIONS (1UL << 4) /* U+0250-U+02AF */ + /* U+1D00-U+1D7F */ + /* U+1D80-U+1DBF */ + /* Bit 5 Spacing Modifier Letters */ + /* Modifier Tone Letters */ +#define TT_UCR_SPACING_MODIFIER (1UL << 5) /* U+02B0-U+02FF */ + /* U+A700-U+A71F */ + /* Bit 6 Combining Diacritical Marks */ + /* Combining Diacritical Marks Supplement */ +#define TT_UCR_COMBINING_DIACRITICAL_MARKS (1UL << 6) /* U+0300-U+036F */ + /* U+1DC0-U+1DFF */ + /* Bit 7 Greek and Coptic */ +#define TT_UCR_GREEK (1UL << 7) /* U+0370-U+03FF */ + /* Bit 8 Coptic */ +#define TT_UCR_COPTIC (1UL << 8) /* U+2C80-U+2CFF */ + /* Bit 9 Cyrillic */ + /* Cyrillic Supplement */ + /* Cyrillic Extended-A */ + /* Cyrillic Extended-B */ +#define TT_UCR_CYRILLIC (1UL << 9) /* U+0400-U+04FF */ + /* U+0500-U+052F */ + /* U+2DE0-U+2DFF */ + /* U+A640-U+A69F */ + /* Bit 10 Armenian */ +#define TT_UCR_ARMENIAN (1UL << 10) /* U+0530-U+058F */ + /* Bit 11 Hebrew */ +#define TT_UCR_HEBREW (1UL << 11) /* U+0590-U+05FF */ + /* Bit 12 Vai */ +#define TT_UCR_VAI (1UL << 12) /* U+A500-U+A63F */ + /* Bit 13 Arabic */ + /* Arabic Supplement */ +#define TT_UCR_ARABIC (1UL << 13) /* U+0600-U+06FF */ + /* U+0750-U+077F */ + /* Bit 14 NKo */ +#define TT_UCR_NKO (1UL << 14) /* U+07C0-U+07FF */ + /* Bit 15 Devanagari */ +#define TT_UCR_DEVANAGARI (1UL << 15) /* U+0900-U+097F */ + /* Bit 16 Bangla (Bengali) */ +#define TT_UCR_BENGALI (1UL << 16) /* U+0980-U+09FF */ + /* Bit 17 Gurmukhi */ +#define TT_UCR_GURMUKHI (1UL << 17) /* U+0A00-U+0A7F */ + /* Bit 18 Gujarati */ +#define TT_UCR_GUJARATI (1UL << 18) /* U+0A80-U+0AFF */ + /* Bit 19 Oriya (Odia) */ +#define TT_UCR_ORIYA (1UL << 19) /* U+0B00-U+0B7F */ + /* Bit 20 Tamil */ +#define TT_UCR_TAMIL (1UL << 20) /* U+0B80-U+0BFF */ + /* Bit 21 Telugu */ +#define TT_UCR_TELUGU (1UL << 21) /* U+0C00-U+0C7F */ + /* Bit 22 Kannada */ +#define TT_UCR_KANNADA (1UL << 22) /* U+0C80-U+0CFF */ + /* Bit 23 Malayalam */ +#define TT_UCR_MALAYALAM (1UL << 23) /* U+0D00-U+0D7F */ + /* Bit 24 Thai */ +#define TT_UCR_THAI (1UL << 24) /* U+0E00-U+0E7F */ + /* Bit 25 Lao */ +#define TT_UCR_LAO (1UL << 25) /* U+0E80-U+0EFF */ + /* Bit 26 Georgian */ + /* Georgian Supplement */ +#define TT_UCR_GEORGIAN (1UL << 26) /* U+10A0-U+10FF */ + /* U+2D00-U+2D2F */ + /* Bit 27 Balinese */ +#define TT_UCR_BALINESE (1UL << 27) /* U+1B00-U+1B7F */ + /* Bit 28 Hangul Jamo */ +#define TT_UCR_HANGUL_JAMO (1UL << 28) /* U+1100-U+11FF */ + /* Bit 29 Latin Extended Additional */ + /* Latin Extended-C */ + /* Latin Extended-D */ +#define TT_UCR_LATIN_EXTENDED_ADDITIONAL (1UL << 29) /* U+1E00-U+1EFF */ + /* U+2C60-U+2C7F */ + /* U+A720-U+A7FF */ + /* Bit 30 Greek Extended */ +#define TT_UCR_GREEK_EXTENDED (1UL << 30) /* U+1F00-U+1FFF */ + /* Bit 31 General Punctuation */ + /* Supplemental Punctuation */ +#define TT_UCR_GENERAL_PUNCTUATION (1UL << 31) /* U+2000-U+206F */ + /* U+2E00-U+2E7F */ + + /* ulUnicodeRange2 */ + /* --------------- */ + + /* Bit 32 Superscripts And Subscripts */ +#define TT_UCR_SUPERSCRIPTS_SUBSCRIPTS (1UL << 0) /* U+2070-U+209F */ + /* Bit 33 Currency Symbols */ +#define TT_UCR_CURRENCY_SYMBOLS (1UL << 1) /* U+20A0-U+20CF */ + /* Bit 34 Combining Diacritical Marks For Symbols */ +#define TT_UCR_COMBINING_DIACRITICAL_MARKS_SYMB \ + (1UL << 2) /* U+20D0-U+20FF */ + /* Bit 35 Letterlike Symbols */ +#define TT_UCR_LETTERLIKE_SYMBOLS (1UL << 3) /* U+2100-U+214F */ + /* Bit 36 Number Forms */ +#define TT_UCR_NUMBER_FORMS (1UL << 4) /* U+2150-U+218F */ + /* Bit 37 Arrows */ + /* Supplemental Arrows-A */ + /* Supplemental Arrows-B */ + /* Miscellaneous Symbols and Arrows */ +#define TT_UCR_ARROWS (1UL << 5) /* U+2190-U+21FF */ + /* U+27F0-U+27FF */ + /* U+2900-U+297F */ + /* U+2B00-U+2BFF */ + /* Bit 38 Mathematical Operators */ + /* Supplemental Mathematical Operators */ + /* Miscellaneous Mathematical Symbols-A */ + /* Miscellaneous Mathematical Symbols-B */ +#define TT_UCR_MATHEMATICAL_OPERATORS (1UL << 6) /* U+2200-U+22FF */ + /* U+2A00-U+2AFF */ + /* U+27C0-U+27EF */ + /* U+2980-U+29FF */ + /* Bit 39 Miscellaneous Technical */ +#define TT_UCR_MISCELLANEOUS_TECHNICAL (1UL << 7) /* U+2300-U+23FF */ + /* Bit 40 Control Pictures */ +#define TT_UCR_CONTROL_PICTURES (1UL << 8) /* U+2400-U+243F */ + /* Bit 41 Optical Character Recognition */ +#define TT_UCR_OCR (1UL << 9) /* U+2440-U+245F */ + /* Bit 42 Enclosed Alphanumerics */ +#define TT_UCR_ENCLOSED_ALPHANUMERICS (1UL << 10) /* U+2460-U+24FF */ + /* Bit 43 Box Drawing */ +#define TT_UCR_BOX_DRAWING (1UL << 11) /* U+2500-U+257F */ + /* Bit 44 Block Elements */ +#define TT_UCR_BLOCK_ELEMENTS (1UL << 12) /* U+2580-U+259F */ + /* Bit 45 Geometric Shapes */ +#define TT_UCR_GEOMETRIC_SHAPES (1UL << 13) /* U+25A0-U+25FF */ + /* Bit 46 Miscellaneous Symbols */ +#define TT_UCR_MISCELLANEOUS_SYMBOLS (1UL << 14) /* U+2600-U+26FF */ + /* Bit 47 Dingbats */ +#define TT_UCR_DINGBATS (1UL << 15) /* U+2700-U+27BF */ + /* Bit 48 CJK Symbols and Punctuation */ +#define TT_UCR_CJK_SYMBOLS (1UL << 16) /* U+3000-U+303F */ + /* Bit 49 Hiragana */ +#define TT_UCR_HIRAGANA (1UL << 17) /* U+3040-U+309F */ + /* Bit 50 Katakana */ + /* Katakana Phonetic Extensions */ +#define TT_UCR_KATAKANA (1UL << 18) /* U+30A0-U+30FF */ + /* U+31F0-U+31FF */ + /* Bit 51 Bopomofo */ + /* Bopomofo Extended */ +#define TT_UCR_BOPOMOFO (1UL << 19) /* U+3100-U+312F */ + /* U+31A0-U+31BF */ + /* Bit 52 Hangul Compatibility Jamo */ +#define TT_UCR_HANGUL_COMPATIBILITY_JAMO (1UL << 20) /* U+3130-U+318F */ + /* Bit 53 Phags-Pa */ +#define TT_UCR_PHAGSPA (1UL << 21) /* U+A840-U+A87F */ +#define TT_UCR_KANBUN TT_UCR_PHAGSPA /* deprecated */ +#define TT_UCR_CJK_MISC TT_UCR_PHAGSPA /* deprecated */ + /* Bit 54 Enclosed CJK Letters and Months */ +#define TT_UCR_ENCLOSED_CJK_LETTERS_MONTHS (1UL << 22) /* U+3200-U+32FF */ + /* Bit 55 CJK Compatibility */ +#define TT_UCR_CJK_COMPATIBILITY (1UL << 23) /* U+3300-U+33FF */ + /* Bit 56 Hangul Syllables */ +#define TT_UCR_HANGUL (1UL << 24) /* U+AC00-U+D7A3 */ + /* Bit 57 High Surrogates */ + /* High Private Use Surrogates */ + /* Low Surrogates */ + + /* According to OpenType specs v.1.3+, */ + /* setting bit 57 implies that there is */ + /* at least one codepoint beyond the */ + /* Basic Multilingual Plane that is */ + /* supported by this font. So it really */ + /* means >= U+10000. */ +#define TT_UCR_SURROGATES (1UL << 25) /* U+D800-U+DB7F */ + /* U+DB80-U+DBFF */ + /* U+DC00-U+DFFF */ +#define TT_UCR_NON_PLANE_0 TT_UCR_SURROGATES + /* Bit 58 Phoenician */ +#define TT_UCR_PHOENICIAN (1UL << 26) /*U+10900-U+1091F*/ + /* Bit 59 CJK Unified Ideographs */ + /* CJK Radicals Supplement */ + /* Kangxi Radicals */ + /* Ideographic Description Characters */ + /* CJK Unified Ideographs Extension A */ + /* CJK Unified Ideographs Extension B */ + /* Kanbun */ +#define TT_UCR_CJK_UNIFIED_IDEOGRAPHS (1UL << 27) /* U+4E00-U+9FFF */ + /* U+2E80-U+2EFF */ + /* U+2F00-U+2FDF */ + /* U+2FF0-U+2FFF */ + /* U+3400-U+4DB5 */ + /*U+20000-U+2A6DF*/ + /* U+3190-U+319F */ + /* Bit 60 Private Use */ +#define TT_UCR_PRIVATE_USE (1UL << 28) /* U+E000-U+F8FF */ + /* Bit 61 CJK Strokes */ + /* CJK Compatibility Ideographs */ + /* CJK Compatibility Ideographs Supplement */ +#define TT_UCR_CJK_COMPATIBILITY_IDEOGRAPHS (1UL << 29) /* U+31C0-U+31EF */ + /* U+F900-U+FAFF */ + /*U+2F800-U+2FA1F*/ + /* Bit 62 Alphabetic Presentation Forms */ +#define TT_UCR_ALPHABETIC_PRESENTATION_FORMS (1UL << 30) /* U+FB00-U+FB4F */ + /* Bit 63 Arabic Presentation Forms-A */ +#define TT_UCR_ARABIC_PRESENTATION_FORMS_A (1UL << 31) /* U+FB50-U+FDFF */ + + /* ulUnicodeRange3 */ + /* --------------- */ + + /* Bit 64 Combining Half Marks */ +#define TT_UCR_COMBINING_HALF_MARKS (1UL << 0) /* U+FE20-U+FE2F */ + /* Bit 65 Vertical forms */ + /* CJK Compatibility Forms */ +#define TT_UCR_CJK_COMPATIBILITY_FORMS (1UL << 1) /* U+FE10-U+FE1F */ + /* U+FE30-U+FE4F */ + /* Bit 66 Small Form Variants */ +#define TT_UCR_SMALL_FORM_VARIANTS (1UL << 2) /* U+FE50-U+FE6F */ + /* Bit 67 Arabic Presentation Forms-B */ +#define TT_UCR_ARABIC_PRESENTATION_FORMS_B (1UL << 3) /* U+FE70-U+FEFF */ + /* Bit 68 Halfwidth and Fullwidth Forms */ +#define TT_UCR_HALFWIDTH_FULLWIDTH_FORMS (1UL << 4) /* U+FF00-U+FFEF */ + /* Bit 69 Specials */ +#define TT_UCR_SPECIALS (1UL << 5) /* U+FFF0-U+FFFF */ + /* Bit 70 Tibetan */ +#define TT_UCR_TIBETAN (1UL << 6) /* U+0F00-U+0FFF */ + /* Bit 71 Syriac */ +#define TT_UCR_SYRIAC (1UL << 7) /* U+0700-U+074F */ + /* Bit 72 Thaana */ +#define TT_UCR_THAANA (1UL << 8) /* U+0780-U+07BF */ + /* Bit 73 Sinhala */ +#define TT_UCR_SINHALA (1UL << 9) /* U+0D80-U+0DFF */ + /* Bit 74 Myanmar */ +#define TT_UCR_MYANMAR (1UL << 10) /* U+1000-U+109F */ + /* Bit 75 Ethiopic */ + /* Ethiopic Supplement */ + /* Ethiopic Extended */ +#define TT_UCR_ETHIOPIC (1UL << 11) /* U+1200-U+137F */ + /* U+1380-U+139F */ + /* U+2D80-U+2DDF */ + /* Bit 76 Cherokee */ +#define TT_UCR_CHEROKEE (1UL << 12) /* U+13A0-U+13FF */ + /* Bit 77 Unified Canadian Aboriginal Syllabics */ +#define TT_UCR_CANADIAN_ABORIGINAL_SYLLABICS (1UL << 13) /* U+1400-U+167F */ + /* Bit 78 Ogham */ +#define TT_UCR_OGHAM (1UL << 14) /* U+1680-U+169F */ + /* Bit 79 Runic */ +#define TT_UCR_RUNIC (1UL << 15) /* U+16A0-U+16FF */ + /* Bit 80 Khmer */ + /* Khmer Symbols */ +#define TT_UCR_KHMER (1UL << 16) /* U+1780-U+17FF */ + /* U+19E0-U+19FF */ + /* Bit 81 Mongolian */ +#define TT_UCR_MONGOLIAN (1UL << 17) /* U+1800-U+18AF */ + /* Bit 82 Braille Patterns */ +#define TT_UCR_BRAILLE (1UL << 18) /* U+2800-U+28FF */ + /* Bit 83 Yi Syllables */ + /* Yi Radicals */ +#define TT_UCR_YI (1UL << 19) /* U+A000-U+A48F */ + /* U+A490-U+A4CF */ + /* Bit 84 Tagalog */ + /* Hanunoo */ + /* Buhid */ + /* Tagbanwa */ +#define TT_UCR_PHILIPPINE (1UL << 20) /* U+1700-U+171F */ + /* U+1720-U+173F */ + /* U+1740-U+175F */ + /* U+1760-U+177F */ + /* Bit 85 Old Italic */ +#define TT_UCR_OLD_ITALIC (1UL << 21) /*U+10300-U+1032F*/ + /* Bit 86 Gothic */ +#define TT_UCR_GOTHIC (1UL << 22) /*U+10330-U+1034F*/ + /* Bit 87 Deseret */ +#define TT_UCR_DESERET (1UL << 23) /*U+10400-U+1044F*/ + /* Bit 88 Byzantine Musical Symbols */ + /* Musical Symbols */ + /* Ancient Greek Musical Notation */ +#define TT_UCR_MUSICAL_SYMBOLS (1UL << 24) /*U+1D000-U+1D0FF*/ + /*U+1D100-U+1D1FF*/ + /*U+1D200-U+1D24F*/ + /* Bit 89 Mathematical Alphanumeric Symbols */ +#define TT_UCR_MATH_ALPHANUMERIC_SYMBOLS (1UL << 25) /*U+1D400-U+1D7FF*/ + /* Bit 90 Private Use (plane 15) */ + /* Private Use (plane 16) */ +#define TT_UCR_PRIVATE_USE_SUPPLEMENTARY (1UL << 26) /*U+F0000-U+FFFFD*/ + /*U+100000-U+10FFFD*/ + /* Bit 91 Variation Selectors */ + /* Variation Selectors Supplement */ +#define TT_UCR_VARIATION_SELECTORS (1UL << 27) /* U+FE00-U+FE0F */ + /*U+E0100-U+E01EF*/ + /* Bit 92 Tags */ +#define TT_UCR_TAGS (1UL << 28) /*U+E0000-U+E007F*/ + /* Bit 93 Limbu */ +#define TT_UCR_LIMBU (1UL << 29) /* U+1900-U+194F */ + /* Bit 94 Tai Le */ +#define TT_UCR_TAI_LE (1UL << 30) /* U+1950-U+197F */ + /* Bit 95 New Tai Lue */ +#define TT_UCR_NEW_TAI_LUE (1UL << 31) /* U+1980-U+19DF */ + + /* ulUnicodeRange4 */ + /* --------------- */ + + /* Bit 96 Buginese */ +#define TT_UCR_BUGINESE (1UL << 0) /* U+1A00-U+1A1F */ + /* Bit 97 Glagolitic */ +#define TT_UCR_GLAGOLITIC (1UL << 1) /* U+2C00-U+2C5F */ + /* Bit 98 Tifinagh */ +#define TT_UCR_TIFINAGH (1UL << 2) /* U+2D30-U+2D7F */ + /* Bit 99 Yijing Hexagram Symbols */ +#define TT_UCR_YIJING (1UL << 3) /* U+4DC0-U+4DFF */ + /* Bit 100 Syloti Nagri */ +#define TT_UCR_SYLOTI_NAGRI (1UL << 4) /* U+A800-U+A82F */ + /* Bit 101 Linear B Syllabary */ + /* Linear B Ideograms */ + /* Aegean Numbers */ +#define TT_UCR_LINEAR_B (1UL << 5) /*U+10000-U+1007F*/ + /*U+10080-U+100FF*/ + /*U+10100-U+1013F*/ + /* Bit 102 Ancient Greek Numbers */ +#define TT_UCR_ANCIENT_GREEK_NUMBERS (1UL << 6) /*U+10140-U+1018F*/ + /* Bit 103 Ugaritic */ +#define TT_UCR_UGARITIC (1UL << 7) /*U+10380-U+1039F*/ + /* Bit 104 Old Persian */ +#define TT_UCR_OLD_PERSIAN (1UL << 8) /*U+103A0-U+103DF*/ + /* Bit 105 Shavian */ +#define TT_UCR_SHAVIAN (1UL << 9) /*U+10450-U+1047F*/ + /* Bit 106 Osmanya */ +#define TT_UCR_OSMANYA (1UL << 10) /*U+10480-U+104AF*/ + /* Bit 107 Cypriot Syllabary */ +#define TT_UCR_CYPRIOT_SYLLABARY (1UL << 11) /*U+10800-U+1083F*/ + /* Bit 108 Kharoshthi */ +#define TT_UCR_KHAROSHTHI (1UL << 12) /*U+10A00-U+10A5F*/ + /* Bit 109 Tai Xuan Jing Symbols */ +#define TT_UCR_TAI_XUAN_JING (1UL << 13) /*U+1D300-U+1D35F*/ + /* Bit 110 Cuneiform */ + /* Cuneiform Numbers and Punctuation */ +#define TT_UCR_CUNEIFORM (1UL << 14) /*U+12000-U+123FF*/ + /*U+12400-U+1247F*/ + /* Bit 111 Counting Rod Numerals */ +#define TT_UCR_COUNTING_ROD_NUMERALS (1UL << 15) /*U+1D360-U+1D37F*/ + /* Bit 112 Sundanese */ +#define TT_UCR_SUNDANESE (1UL << 16) /* U+1B80-U+1BBF */ + /* Bit 113 Lepcha */ +#define TT_UCR_LEPCHA (1UL << 17) /* U+1C00-U+1C4F */ + /* Bit 114 Ol Chiki */ +#define TT_UCR_OL_CHIKI (1UL << 18) /* U+1C50-U+1C7F */ + /* Bit 115 Saurashtra */ +#define TT_UCR_SAURASHTRA (1UL << 19) /* U+A880-U+A8DF */ + /* Bit 116 Kayah Li */ +#define TT_UCR_KAYAH_LI (1UL << 20) /* U+A900-U+A92F */ + /* Bit 117 Rejang */ +#define TT_UCR_REJANG (1UL << 21) /* U+A930-U+A95F */ + /* Bit 118 Cham */ +#define TT_UCR_CHAM (1UL << 22) /* U+AA00-U+AA5F */ + /* Bit 119 Ancient Symbols */ +#define TT_UCR_ANCIENT_SYMBOLS (1UL << 23) /*U+10190-U+101CF*/ + /* Bit 120 Phaistos Disc */ +#define TT_UCR_PHAISTOS_DISC (1UL << 24) /*U+101D0-U+101FF*/ + /* Bit 121 Carian */ + /* Lycian */ + /* Lydian */ +#define TT_UCR_OLD_ANATOLIAN (1UL << 25) /*U+102A0-U+102DF*/ + /*U+10280-U+1029F*/ + /*U+10920-U+1093F*/ + /* Bit 122 Domino Tiles */ + /* Mahjong Tiles */ +#define TT_UCR_GAME_TILES (1UL << 26) /*U+1F030-U+1F09F*/ + /*U+1F000-U+1F02F*/ + /* Bit 123-127 Reserved for process-internal usage */ + + /* */ + + /* for backward compatibility with older FreeType versions */ +#define TT_UCR_ARABIC_PRESENTATION_A \ + TT_UCR_ARABIC_PRESENTATION_FORMS_A +#define TT_UCR_ARABIC_PRESENTATION_B \ + TT_UCR_ARABIC_PRESENTATION_FORMS_B + +#define TT_UCR_COMBINING_DIACRITICS \ + TT_UCR_COMBINING_DIACRITICAL_MARKS +#define TT_UCR_COMBINING_DIACRITICS_SYMB \ + TT_UCR_COMBINING_DIACRITICAL_MARKS_SYMB + + +FT_END_HEADER + +#endif /* TTNAMEID_H_ */ + + +/* END */ diff --git a/dependencies/winx64/include/freetype2/freetype/tttables.h b/dependencies/winx64/include/freetype2/freetype/tttables.h new file mode 100644 index 0000000..ae95533 --- /dev/null +++ b/dependencies/winx64/include/freetype2/freetype/tttables.h @@ -0,0 +1,859 @@ +/**************************************************************************** + * + * tttables.h + * + * Basic SFNT/TrueType tables definitions and interface + * (specification only). + * + * Copyright (C) 1996-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + +#ifndef TTTABLES_H_ +#define TTTABLES_H_ + + +#include + +#ifdef FREETYPE_H +#error "freetype.h of FreeType 1 has been loaded!" +#error "Please fix the directory search order for header files" +#error "so that freetype.h of FreeType 2 is found first." +#endif + + +FT_BEGIN_HEADER + + /************************************************************************** + * + * @section: + * truetype_tables + * + * @title: + * TrueType Tables + * + * @abstract: + * TrueType-specific table types and functions. + * + * @description: + * This section contains definitions of some basic tables specific to + * TrueType and OpenType as well as some routines used to access and + * process them. + * + * @order: + * TT_Header + * TT_HoriHeader + * TT_VertHeader + * TT_OS2 + * TT_Postscript + * TT_PCLT + * TT_MaxProfile + * + * FT_Sfnt_Tag + * FT_Get_Sfnt_Table + * FT_Load_Sfnt_Table + * FT_Sfnt_Table_Info + * + * FT_Get_CMap_Language_ID + * FT_Get_CMap_Format + * + * FT_PARAM_TAG_UNPATENTED_HINTING + * + */ + + + /************************************************************************** + * + * @struct: + * TT_Header + * + * @description: + * A structure to model a TrueType font header table. All fields follow + * the OpenType specification. The 64-bit timestamps are stored in + * two-element arrays `Created` and `Modified`, first the upper then + * the lower 32~bits. + */ + typedef struct TT_Header_ + { + FT_Fixed Table_Version; + FT_Fixed Font_Revision; + + FT_Long CheckSum_Adjust; + FT_Long Magic_Number; + + FT_UShort Flags; + FT_UShort Units_Per_EM; + + FT_ULong Created [2]; + FT_ULong Modified[2]; + + FT_Short xMin; + FT_Short yMin; + FT_Short xMax; + FT_Short yMax; + + FT_UShort Mac_Style; + FT_UShort Lowest_Rec_PPEM; + + FT_Short Font_Direction; + FT_Short Index_To_Loc_Format; + FT_Short Glyph_Data_Format; + + } TT_Header; + + + /************************************************************************** + * + * @struct: + * TT_HoriHeader + * + * @description: + * A structure to model a TrueType horizontal header, the 'hhea' table, + * as well as the corresponding horizontal metrics table, 'hmtx'. + * + * @fields: + * Version :: + * The table version. + * + * Ascender :: + * The font's ascender, i.e., the distance from the baseline to the + * top-most of all glyph points found in the font. + * + * This value is invalid in many fonts, as it is usually set by the + * font designer, and often reflects only a portion of the glyphs found + * in the font (maybe ASCII). + * + * You should use the `sTypoAscender` field of the 'OS/2' table instead + * if you want the correct one. + * + * Descender :: + * The font's descender, i.e., the distance from the baseline to the + * bottom-most of all glyph points found in the font. It is negative. + * + * This value is invalid in many fonts, as it is usually set by the + * font designer, and often reflects only a portion of the glyphs found + * in the font (maybe ASCII). + * + * You should use the `sTypoDescender` field of the 'OS/2' table + * instead if you want the correct one. + * + * Line_Gap :: + * The font's line gap, i.e., the distance to add to the ascender and + * descender to get the BTB, i.e., the baseline-to-baseline distance + * for the font. + * + * advance_Width_Max :: + * This field is the maximum of all advance widths found in the font. + * It can be used to compute the maximum width of an arbitrary string + * of text. + * + * min_Left_Side_Bearing :: + * The minimum left side bearing of all glyphs within the font. + * + * min_Right_Side_Bearing :: + * The minimum right side bearing of all glyphs within the font. + * + * xMax_Extent :: + * The maximum horizontal extent (i.e., the 'width' of a glyph's + * bounding box) for all glyphs in the font. + * + * caret_Slope_Rise :: + * The rise coefficient of the cursor's slope of the cursor + * (slope=rise/run). + * + * caret_Slope_Run :: + * The run coefficient of the cursor's slope. + * + * caret_Offset :: + * The cursor's offset for slanted fonts. + * + * Reserved :: + * 8~reserved bytes. + * + * metric_Data_Format :: + * Always~0. + * + * number_Of_HMetrics :: + * Number of HMetrics entries in the 'hmtx' table -- this value can be + * smaller than the total number of glyphs in the font. + * + * long_metrics :: + * A pointer into the 'hmtx' table. + * + * short_metrics :: + * A pointer into the 'hmtx' table. + * + * @note: + * For an OpenType variation font, the values of the following fields can + * change after a call to @FT_Set_Var_Design_Coordinates (and friends) if + * the font contains an 'MVAR' table: `caret_Slope_Rise`, + * `caret_Slope_Run`, and `caret_Offset`. + */ + typedef struct TT_HoriHeader_ + { + FT_Fixed Version; + FT_Short Ascender; + FT_Short Descender; + FT_Short Line_Gap; + + FT_UShort advance_Width_Max; /* advance width maximum */ + + FT_Short min_Left_Side_Bearing; /* minimum left-sb */ + FT_Short min_Right_Side_Bearing; /* minimum right-sb */ + FT_Short xMax_Extent; /* xmax extents */ + FT_Short caret_Slope_Rise; + FT_Short caret_Slope_Run; + FT_Short caret_Offset; + + FT_Short Reserved[4]; + + FT_Short metric_Data_Format; + FT_UShort number_Of_HMetrics; + + /* The following fields are not defined by the OpenType specification */ + /* but they are used to connect the metrics header to the relevant */ + /* 'hmtx' table. */ + + void* long_metrics; + void* short_metrics; + + } TT_HoriHeader; + + + /************************************************************************** + * + * @struct: + * TT_VertHeader + * + * @description: + * A structure used to model a TrueType vertical header, the 'vhea' + * table, as well as the corresponding vertical metrics table, 'vmtx'. + * + * @fields: + * Version :: + * The table version. + * + * Ascender :: + * The font's ascender, i.e., the distance from the baseline to the + * top-most of all glyph points found in the font. + * + * This value is invalid in many fonts, as it is usually set by the + * font designer, and often reflects only a portion of the glyphs found + * in the font (maybe ASCII). + * + * You should use the `sTypoAscender` field of the 'OS/2' table instead + * if you want the correct one. + * + * Descender :: + * The font's descender, i.e., the distance from the baseline to the + * bottom-most of all glyph points found in the font. It is negative. + * + * This value is invalid in many fonts, as it is usually set by the + * font designer, and often reflects only a portion of the glyphs found + * in the font (maybe ASCII). + * + * You should use the `sTypoDescender` field of the 'OS/2' table + * instead if you want the correct one. + * + * Line_Gap :: + * The font's line gap, i.e., the distance to add to the ascender and + * descender to get the BTB, i.e., the baseline-to-baseline distance + * for the font. + * + * advance_Height_Max :: + * This field is the maximum of all advance heights found in the font. + * It can be used to compute the maximum height of an arbitrary string + * of text. + * + * min_Top_Side_Bearing :: + * The minimum top side bearing of all glyphs within the font. + * + * min_Bottom_Side_Bearing :: + * The minimum bottom side bearing of all glyphs within the font. + * + * yMax_Extent :: + * The maximum vertical extent (i.e., the 'height' of a glyph's + * bounding box) for all glyphs in the font. + * + * caret_Slope_Rise :: + * The rise coefficient of the cursor's slope of the cursor + * (slope=rise/run). + * + * caret_Slope_Run :: + * The run coefficient of the cursor's slope. + * + * caret_Offset :: + * The cursor's offset for slanted fonts. + * + * Reserved :: + * 8~reserved bytes. + * + * metric_Data_Format :: + * Always~0. + * + * number_Of_VMetrics :: + * Number of VMetrics entries in the 'vmtx' table -- this value can be + * smaller than the total number of glyphs in the font. + * + * long_metrics :: + * A pointer into the 'vmtx' table. + * + * short_metrics :: + * A pointer into the 'vmtx' table. + * + * @note: + * For an OpenType variation font, the values of the following fields can + * change after a call to @FT_Set_Var_Design_Coordinates (and friends) if + * the font contains an 'MVAR' table: `Ascender`, `Descender`, + * `Line_Gap`, `caret_Slope_Rise`, `caret_Slope_Run`, and `caret_Offset`. + */ + typedef struct TT_VertHeader_ + { + FT_Fixed Version; + FT_Short Ascender; + FT_Short Descender; + FT_Short Line_Gap; + + FT_UShort advance_Height_Max; /* advance height maximum */ + + FT_Short min_Top_Side_Bearing; /* minimum top-sb */ + FT_Short min_Bottom_Side_Bearing; /* minimum bottom-sb */ + FT_Short yMax_Extent; /* ymax extents */ + FT_Short caret_Slope_Rise; + FT_Short caret_Slope_Run; + FT_Short caret_Offset; + + FT_Short Reserved[4]; + + FT_Short metric_Data_Format; + FT_UShort number_Of_VMetrics; + + /* The following fields are not defined by the OpenType specification */ + /* but they are used to connect the metrics header to the relevant */ + /* 'vmtx' table. */ + + void* long_metrics; + void* short_metrics; + + } TT_VertHeader; + + + /************************************************************************** + * + * @struct: + * TT_OS2 + * + * @description: + * A structure to model a TrueType 'OS/2' table. All fields comply to + * the OpenType specification. + * + * Note that we now support old Mac fonts that do not include an 'OS/2' + * table. In this case, the `version` field is always set to 0xFFFF. + * + * @note: + * For an OpenType variation font, the values of the following fields can + * change after a call to @FT_Set_Var_Design_Coordinates (and friends) if + * the font contains an 'MVAR' table: `sCapHeight`, `sTypoAscender`, + * `sTypoDescender`, `sTypoLineGap`, `sxHeight`, `usWinAscent`, + * `usWinDescent`, `yStrikeoutPosition`, `yStrikeoutSize`, + * `ySubscriptXOffset`, `ySubScriptXSize`, `ySubscriptYOffset`, + * `ySubscriptYSize`, `ySuperscriptXOffset`, `ySuperscriptXSize`, + * `ySuperscriptYOffset`, and `ySuperscriptYSize`. + * + * Possible values for bits in the `ulUnicodeRangeX` fields are given by + * the @TT_UCR_XXX macros. + */ + + typedef struct TT_OS2_ + { + FT_UShort version; /* 0x0001 - more or 0xFFFF */ + FT_Short xAvgCharWidth; + FT_UShort usWeightClass; + FT_UShort usWidthClass; + FT_UShort fsType; + FT_Short ySubscriptXSize; + FT_Short ySubscriptYSize; + FT_Short ySubscriptXOffset; + FT_Short ySubscriptYOffset; + FT_Short ySuperscriptXSize; + FT_Short ySuperscriptYSize; + FT_Short ySuperscriptXOffset; + FT_Short ySuperscriptYOffset; + FT_Short yStrikeoutSize; + FT_Short yStrikeoutPosition; + FT_Short sFamilyClass; + + FT_Byte panose[10]; + + FT_ULong ulUnicodeRange1; /* Bits 0-31 */ + FT_ULong ulUnicodeRange2; /* Bits 32-63 */ + FT_ULong ulUnicodeRange3; /* Bits 64-95 */ + FT_ULong ulUnicodeRange4; /* Bits 96-127 */ + + FT_Char achVendID[4]; + + FT_UShort fsSelection; + FT_UShort usFirstCharIndex; + FT_UShort usLastCharIndex; + FT_Short sTypoAscender; + FT_Short sTypoDescender; + FT_Short sTypoLineGap; + FT_UShort usWinAscent; + FT_UShort usWinDescent; + + /* only version 1 and higher: */ + + FT_ULong ulCodePageRange1; /* Bits 0-31 */ + FT_ULong ulCodePageRange2; /* Bits 32-63 */ + + /* only version 2 and higher: */ + + FT_Short sxHeight; + FT_Short sCapHeight; + FT_UShort usDefaultChar; + FT_UShort usBreakChar; + FT_UShort usMaxContext; + + /* only version 5 and higher: */ + + FT_UShort usLowerOpticalPointSize; /* in twips (1/20 points) */ + FT_UShort usUpperOpticalPointSize; /* in twips (1/20 points) */ + + } TT_OS2; + + + /************************************************************************** + * + * @struct: + * TT_Postscript + * + * @description: + * A structure to model a TrueType 'post' table. All fields comply to + * the OpenType specification. This structure does not reference a + * font's PostScript glyph names; use @FT_Get_Glyph_Name to retrieve + * them. + * + * @note: + * For an OpenType variation font, the values of the following fields can + * change after a call to @FT_Set_Var_Design_Coordinates (and friends) if + * the font contains an 'MVAR' table: `underlinePosition` and + * `underlineThickness`. + */ + typedef struct TT_Postscript_ + { + FT_Fixed FormatType; + FT_Fixed italicAngle; + FT_Short underlinePosition; + FT_Short underlineThickness; + FT_ULong isFixedPitch; + FT_ULong minMemType42; + FT_ULong maxMemType42; + FT_ULong minMemType1; + FT_ULong maxMemType1; + + /* Glyph names follow in the 'post' table, but we don't */ + /* load them by default. */ + + } TT_Postscript; + + + /************************************************************************** + * + * @struct: + * TT_PCLT + * + * @description: + * A structure to model a TrueType 'PCLT' table. All fields comply to + * the OpenType specification. + */ + typedef struct TT_PCLT_ + { + FT_Fixed Version; + FT_ULong FontNumber; + FT_UShort Pitch; + FT_UShort xHeight; + FT_UShort Style; + FT_UShort TypeFamily; + FT_UShort CapHeight; + FT_UShort SymbolSet; + FT_Char TypeFace[16]; + FT_Char CharacterComplement[8]; + FT_Char FileName[6]; + FT_Char StrokeWeight; + FT_Char WidthType; + FT_Byte SerifStyle; + FT_Byte Reserved; + + } TT_PCLT; + + + /************************************************************************** + * + * @struct: + * TT_MaxProfile + * + * @description: + * The maximum profile ('maxp') table contains many max values, which can + * be used to pre-allocate arrays for speeding up glyph loading and + * hinting. + * + * @fields: + * version :: + * The version number. + * + * numGlyphs :: + * The number of glyphs in this TrueType font. + * + * maxPoints :: + * The maximum number of points in a non-composite TrueType glyph. See + * also `maxCompositePoints`. + * + * maxContours :: + * The maximum number of contours in a non-composite TrueType glyph. + * See also `maxCompositeContours`. + * + * maxCompositePoints :: + * The maximum number of points in a composite TrueType glyph. See + * also `maxPoints`. + * + * maxCompositeContours :: + * The maximum number of contours in a composite TrueType glyph. See + * also `maxContours`. + * + * maxZones :: + * The maximum number of zones used for glyph hinting. + * + * maxTwilightPoints :: + * The maximum number of points in the twilight zone used for glyph + * hinting. + * + * maxStorage :: + * The maximum number of elements in the storage area used for glyph + * hinting. + * + * maxFunctionDefs :: + * The maximum number of function definitions in the TrueType bytecode + * for this font. + * + * maxInstructionDefs :: + * The maximum number of instruction definitions in the TrueType + * bytecode for this font. + * + * maxStackElements :: + * The maximum number of stack elements used during bytecode + * interpretation. + * + * maxSizeOfInstructions :: + * The maximum number of TrueType opcodes used for glyph hinting. + * + * maxComponentElements :: + * The maximum number of simple (i.e., non-composite) glyphs in a + * composite glyph. + * + * maxComponentDepth :: + * The maximum nesting depth of composite glyphs. + * + * @note: + * This structure is only used during font loading. + */ + typedef struct TT_MaxProfile_ + { + FT_Fixed version; + FT_UShort numGlyphs; + FT_UShort maxPoints; + FT_UShort maxContours; + FT_UShort maxCompositePoints; + FT_UShort maxCompositeContours; + FT_UShort maxZones; + FT_UShort maxTwilightPoints; + FT_UShort maxStorage; + FT_UShort maxFunctionDefs; + FT_UShort maxInstructionDefs; + FT_UShort maxStackElements; + FT_UShort maxSizeOfInstructions; + FT_UShort maxComponentElements; + FT_UShort maxComponentDepth; + + } TT_MaxProfile; + + + /************************************************************************** + * + * @enum: + * FT_Sfnt_Tag + * + * @description: + * An enumeration to specify indices of SFNT tables loaded and parsed by + * FreeType during initialization of an SFNT font. Used in the + * @FT_Get_Sfnt_Table API function. + * + * @values: + * FT_SFNT_HEAD :: + * To access the font's @TT_Header structure. + * + * FT_SFNT_MAXP :: + * To access the font's @TT_MaxProfile structure. + * + * FT_SFNT_OS2 :: + * To access the font's @TT_OS2 structure. + * + * FT_SFNT_HHEA :: + * To access the font's @TT_HoriHeader structure. + * + * FT_SFNT_VHEA :: + * To access the font's @TT_VertHeader structure. + * + * FT_SFNT_POST :: + * To access the font's @TT_Postscript structure. + * + * FT_SFNT_PCLT :: + * To access the font's @TT_PCLT structure. + */ + typedef enum FT_Sfnt_Tag_ + { + FT_SFNT_HEAD, + FT_SFNT_MAXP, + FT_SFNT_OS2, + FT_SFNT_HHEA, + FT_SFNT_VHEA, + FT_SFNT_POST, + FT_SFNT_PCLT, + + FT_SFNT_MAX + + } FT_Sfnt_Tag; + + /* these constants are deprecated; use the corresponding `FT_Sfnt_Tag` */ + /* values instead */ +#define ft_sfnt_head FT_SFNT_HEAD +#define ft_sfnt_maxp FT_SFNT_MAXP +#define ft_sfnt_os2 FT_SFNT_OS2 +#define ft_sfnt_hhea FT_SFNT_HHEA +#define ft_sfnt_vhea FT_SFNT_VHEA +#define ft_sfnt_post FT_SFNT_POST +#define ft_sfnt_pclt FT_SFNT_PCLT + + + /************************************************************************** + * + * @function: + * FT_Get_Sfnt_Table + * + * @description: + * Return a pointer to a given SFNT table stored within a face. + * + * @input: + * face :: + * A handle to the source. + * + * tag :: + * The index of the SFNT table. + * + * @return: + * A type-less pointer to the table. This will be `NULL` in case of + * error, or if the corresponding table was not found **OR** loaded from + * the file. + * + * Use a typecast according to `tag` to access the structure elements. + * + * @note: + * The table is owned by the face object and disappears with it. + * + * This function is only useful to access SFNT tables that are loaded by + * the sfnt, truetype, and opentype drivers. See @FT_Sfnt_Tag for a + * list. + * + * @example: + * Here is an example demonstrating access to the 'vhea' table. + * + * ``` + * TT_VertHeader* vert_header; + * + * + * vert_header = + * (TT_VertHeader*)FT_Get_Sfnt_Table( face, FT_SFNT_VHEA ); + * ``` + */ + FT_EXPORT( void* ) + FT_Get_Sfnt_Table( FT_Face face, + FT_Sfnt_Tag tag ); + + + /************************************************************************** + * + * @function: + * FT_Load_Sfnt_Table + * + * @description: + * Load any SFNT font table into client memory. + * + * @input: + * face :: + * A handle to the source face. + * + * tag :: + * The four-byte tag of the table to load. Use value~0 if you want to + * access the whole font file. Otherwise, you can use one of the + * definitions found in the @FT_TRUETYPE_TAGS_H file, or forge a new + * one with @FT_MAKE_TAG. + * + * [Since 2.14] Use value~1 if you want to access the table directory + * of the (currently selected) font. + * + * offset :: + * The starting offset in the table (or file if tag~==~0). + * + * @output: + * buffer :: + * The target buffer address. The client must ensure that the memory + * array is big enough to hold the data. + * + * @inout: + * length :: + * If the `length` parameter is `NULL`, try to load the whole table. + * Return an error code if it fails. + * + * Else, if `*length` is~0, exit immediately while returning the + * table's (or file) full size in it. + * + * Else the number of bytes to read from the table or file, from the + * starting offset. + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * If you need to determine the table's length you should first call this + * function with `*length` set to~0, as in the following example: + * + * ``` + * FT_ULong length = 0; + * + * + * error = FT_Load_Sfnt_Table( face, tag, 0, NULL, &length ); + * if ( error ) { ... table does not exist ... } + * + * buffer = malloc( length ); + * if ( buffer == NULL ) { ... not enough memory ... } + * + * error = FT_Load_Sfnt_Table( face, tag, 0, buffer, &length ); + * if ( error ) { ... could not load table ... } + * ``` + * + * Note that structures like @TT_Header or @TT_OS2 can't be used with + * this function; they are limited to @FT_Get_Sfnt_Table. Reason is that + * those structures depend on the processor architecture, with varying + * size (e.g. 32bit vs. 64bit) or order (big endian vs. little endian). + * + */ + FT_EXPORT( FT_Error ) + FT_Load_Sfnt_Table( FT_Face face, + FT_ULong tag, + FT_Long offset, + FT_Byte* buffer, + FT_ULong* length ); + + + /************************************************************************** + * + * @function: + * FT_Sfnt_Table_Info + * + * @description: + * Return information on an SFNT table. + * + * @input: + * face :: + * A handle to the source face. + * + * table_index :: + * The index of an SFNT table. The function returns + * FT_Err_Table_Missing for an invalid value. + * + * @inout: + * tag :: + * The name tag of the SFNT table. If the value is `NULL`, + * `table_index` is ignored, and `length` returns the number of SFNT + * tables in the font. + * + * @output: + * length :: + * The length of the SFNT table (or the number of SFNT tables, + * depending on `tag`). + * + * @return: + * FreeType error code. 0~means success. + * + * @note: + * While parsing fonts, FreeType handles SFNT tables with length zero as + * missing. + * + */ + FT_EXPORT( FT_Error ) + FT_Sfnt_Table_Info( FT_Face face, + FT_UInt table_index, + FT_ULong *tag, + FT_ULong *length ); + + + /************************************************************************** + * + * @function: + * FT_Get_CMap_Language_ID + * + * @description: + * Return cmap language ID as specified in the OpenType standard. + * Definitions of language ID values are in file @FT_TRUETYPE_IDS_H. + * + * @input: + * charmap :: + * The target charmap. + * + * @return: + * The language ID of `charmap`. If `charmap` doesn't belong to an SFNT + * face, just return~0 as the default value. + * + * For a format~14 cmap (to access Unicode IVS), the return value is + * 0xFFFFFFFF. + */ + FT_EXPORT( FT_ULong ) + FT_Get_CMap_Language_ID( FT_CharMap charmap ); + + + /************************************************************************** + * + * @function: + * FT_Get_CMap_Format + * + * @description: + * Return the format of an SFNT 'cmap' table. + * + * @input: + * charmap :: + * The target charmap. + * + * @return: + * The format of `charmap`. If `charmap` doesn't belong to an SFNT face + * (including the synthetic Unicode charmap sometimes created by + * FreeType), return -1. + */ + FT_EXPORT( FT_Long ) + FT_Get_CMap_Format( FT_CharMap charmap ); + + /* */ + + +FT_END_HEADER + +#endif /* TTTABLES_H_ */ + + +/* END */ diff --git a/dependencies/winx64/include/freetype2/freetype/tttags.h b/dependencies/winx64/include/freetype2/freetype/tttags.h new file mode 100644 index 0000000..da0af5d --- /dev/null +++ b/dependencies/winx64/include/freetype2/freetype/tttags.h @@ -0,0 +1,124 @@ +/**************************************************************************** + * + * tttags.h + * + * Tags for TrueType and OpenType tables (specification only). + * + * Copyright (C) 1996-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + +#ifndef TTAGS_H_ +#define TTAGS_H_ + + +#include + +#ifdef FREETYPE_H +#error "freetype.h of FreeType 1 has been loaded!" +#error "Please fix the directory search order for header files" +#error "so that freetype.h of FreeType 2 is found first." +#endif + + +FT_BEGIN_HEADER + + +#define TTAG_avar FT_MAKE_TAG( 'a', 'v', 'a', 'r' ) +#define TTAG_BASE FT_MAKE_TAG( 'B', 'A', 'S', 'E' ) +#define TTAG_bdat FT_MAKE_TAG( 'b', 'd', 'a', 't' ) +#define TTAG_BDF FT_MAKE_TAG( 'B', 'D', 'F', ' ' ) +#define TTAG_bhed FT_MAKE_TAG( 'b', 'h', 'e', 'd' ) +#define TTAG_bloc FT_MAKE_TAG( 'b', 'l', 'o', 'c' ) +#define TTAG_bsln FT_MAKE_TAG( 'b', 's', 'l', 'n' ) +#define TTAG_CBDT FT_MAKE_TAG( 'C', 'B', 'D', 'T' ) +#define TTAG_CBLC FT_MAKE_TAG( 'C', 'B', 'L', 'C' ) +#define TTAG_CFF FT_MAKE_TAG( 'C', 'F', 'F', ' ' ) +#define TTAG_CFF2 FT_MAKE_TAG( 'C', 'F', 'F', '2' ) +#define TTAG_CID FT_MAKE_TAG( 'C', 'I', 'D', ' ' ) +#define TTAG_cmap FT_MAKE_TAG( 'c', 'm', 'a', 'p' ) +#define TTAG_COLR FT_MAKE_TAG( 'C', 'O', 'L', 'R' ) +#define TTAG_CPAL FT_MAKE_TAG( 'C', 'P', 'A', 'L' ) +#define TTAG_cvar FT_MAKE_TAG( 'c', 'v', 'a', 'r' ) +#define TTAG_cvt FT_MAKE_TAG( 'c', 'v', 't', ' ' ) +#define TTAG_DSIG FT_MAKE_TAG( 'D', 'S', 'I', 'G' ) +#define TTAG_EBDT FT_MAKE_TAG( 'E', 'B', 'D', 'T' ) +#define TTAG_EBLC FT_MAKE_TAG( 'E', 'B', 'L', 'C' ) +#define TTAG_EBSC FT_MAKE_TAG( 'E', 'B', 'S', 'C' ) +#define TTAG_feat FT_MAKE_TAG( 'f', 'e', 'a', 't' ) +#define TTAG_FOND FT_MAKE_TAG( 'F', 'O', 'N', 'D' ) +#define TTAG_fpgm FT_MAKE_TAG( 'f', 'p', 'g', 'm' ) +#define TTAG_fvar FT_MAKE_TAG( 'f', 'v', 'a', 'r' ) +#define TTAG_gasp FT_MAKE_TAG( 'g', 'a', 's', 'p' ) +#define TTAG_GDEF FT_MAKE_TAG( 'G', 'D', 'E', 'F' ) +#define TTAG_glyf FT_MAKE_TAG( 'g', 'l', 'y', 'f' ) +#define TTAG_GPOS FT_MAKE_TAG( 'G', 'P', 'O', 'S' ) +#define TTAG_GSUB FT_MAKE_TAG( 'G', 'S', 'U', 'B' ) +#define TTAG_gvar FT_MAKE_TAG( 'g', 'v', 'a', 'r' ) +#define TTAG_HVAR FT_MAKE_TAG( 'H', 'V', 'A', 'R' ) +#define TTAG_hdmx FT_MAKE_TAG( 'h', 'd', 'm', 'x' ) +#define TTAG_head FT_MAKE_TAG( 'h', 'e', 'a', 'd' ) +#define TTAG_hhea FT_MAKE_TAG( 'h', 'h', 'e', 'a' ) +#define TTAG_hmtx FT_MAKE_TAG( 'h', 'm', 't', 'x' ) +#define TTAG_JSTF FT_MAKE_TAG( 'J', 'S', 'T', 'F' ) +#define TTAG_just FT_MAKE_TAG( 'j', 'u', 's', 't' ) +#define TTAG_kern FT_MAKE_TAG( 'k', 'e', 'r', 'n' ) +#define TTAG_lcar FT_MAKE_TAG( 'l', 'c', 'a', 'r' ) +#define TTAG_loca FT_MAKE_TAG( 'l', 'o', 'c', 'a' ) +#define TTAG_LTSH FT_MAKE_TAG( 'L', 'T', 'S', 'H' ) +#define TTAG_LWFN FT_MAKE_TAG( 'L', 'W', 'F', 'N' ) +#define TTAG_MATH FT_MAKE_TAG( 'M', 'A', 'T', 'H' ) +#define TTAG_maxp FT_MAKE_TAG( 'm', 'a', 'x', 'p' ) +#define TTAG_META FT_MAKE_TAG( 'M', 'E', 'T', 'A' ) +#define TTAG_MMFX FT_MAKE_TAG( 'M', 'M', 'F', 'X' ) +#define TTAG_MMSD FT_MAKE_TAG( 'M', 'M', 'S', 'D' ) +#define TTAG_mort FT_MAKE_TAG( 'm', 'o', 'r', 't' ) +#define TTAG_morx FT_MAKE_TAG( 'm', 'o', 'r', 'x' ) +#define TTAG_MVAR FT_MAKE_TAG( 'M', 'V', 'A', 'R' ) +#define TTAG_name FT_MAKE_TAG( 'n', 'a', 'm', 'e' ) +#define TTAG_opbd FT_MAKE_TAG( 'o', 'p', 'b', 'd' ) +#define TTAG_OS2 FT_MAKE_TAG( 'O', 'S', '/', '2' ) +#define TTAG_OTTO FT_MAKE_TAG( 'O', 'T', 'T', 'O' ) +#define TTAG_PCLT FT_MAKE_TAG( 'P', 'C', 'L', 'T' ) +#define TTAG_POST FT_MAKE_TAG( 'P', 'O', 'S', 'T' ) +#define TTAG_post FT_MAKE_TAG( 'p', 'o', 's', 't' ) +#define TTAG_prep FT_MAKE_TAG( 'p', 'r', 'e', 'p' ) +#define TTAG_prop FT_MAKE_TAG( 'p', 'r', 'o', 'p' ) +#define TTAG_sbix FT_MAKE_TAG( 's', 'b', 'i', 'x' ) +#define TTAG_sfnt FT_MAKE_TAG( 's', 'f', 'n', 't' ) +#define TTAG_SING FT_MAKE_TAG( 'S', 'I', 'N', 'G' ) +#define TTAG_SVG FT_MAKE_TAG( 'S', 'V', 'G', ' ' ) +#define TTAG_trak FT_MAKE_TAG( 't', 'r', 'a', 'k' ) +#define TTAG_true FT_MAKE_TAG( 't', 'r', 'u', 'e' ) +#define TTAG_ttc FT_MAKE_TAG( 't', 't', 'c', ' ' ) +#define TTAG_ttcf FT_MAKE_TAG( 't', 't', 'c', 'f' ) +#define TTAG_TYP1 FT_MAKE_TAG( 'T', 'Y', 'P', '1' ) +#define TTAG_typ1 FT_MAKE_TAG( 't', 'y', 'p', '1' ) +#define TTAG_VDMX FT_MAKE_TAG( 'V', 'D', 'M', 'X' ) +#define TTAG_vhea FT_MAKE_TAG( 'v', 'h', 'e', 'a' ) +#define TTAG_vmtx FT_MAKE_TAG( 'v', 'm', 't', 'x' ) +#define TTAG_VVAR FT_MAKE_TAG( 'V', 'V', 'A', 'R' ) +#define TTAG_wOFF FT_MAKE_TAG( 'w', 'O', 'F', 'F' ) +#define TTAG_wOF2 FT_MAKE_TAG( 'w', 'O', 'F', '2' ) + +/* used by "Keyboard.dfont" on legacy Mac OS X */ +#define TTAG_0xA5kbd FT_MAKE_TAG( 0xA5, 'k', 'b', 'd' ) + +/* used by "LastResort.dfont" on legacy Mac OS X */ +#define TTAG_0xA5lst FT_MAKE_TAG( 0xA5, 'l', 's', 't' ) + + +FT_END_HEADER + +#endif /* TTAGS_H_ */ + + +/* END */ diff --git a/dependencies/winx64/include/freetype2/ft2build.h b/dependencies/winx64/include/freetype2/ft2build.h new file mode 100644 index 0000000..d3d7685 --- /dev/null +++ b/dependencies/winx64/include/freetype2/ft2build.h @@ -0,0 +1,42 @@ +/**************************************************************************** + * + * ft2build.h + * + * FreeType 2 build and setup macros. + * + * Copyright (C) 1996-2024 by + * David Turner, Robert Wilhelm, and Werner Lemberg. + * + * This file is part of the FreeType project, and may only be used, + * modified, and distributed under the terms of the FreeType project + * license, LICENSE.TXT. By continuing to use, modify, or distribute + * this file you indicate that you have read the license and + * understand and accept it fully. + * + */ + + + /************************************************************************** + * + * This is the 'entry point' for FreeType header file inclusions, to be + * loaded before all other header files. + * + * A typical example is + * + * ``` + * #include + * #include + * ``` + * + */ + + +#ifndef FT2BUILD_H_ +#define FT2BUILD_H_ + +#include + +#endif /* FT2BUILD_H_ */ + + +/* END */ diff --git a/dependencies/winx64/include/harfbuzz/hb-aat-layout.h b/dependencies/winx64/include/harfbuzz/hb-aat-layout.h new file mode 100644 index 0000000..c682a2f --- /dev/null +++ b/dependencies/winx64/include/harfbuzz/hb-aat-layout.h @@ -0,0 +1,795 @@ +/* + * Copyright © 2018 Ebrahim Byagowi + * + * This is part of HarfBuzz, a text shaping library. + * + * Permission is hereby granted, without written agreement and without + * license or royalty fees, to use, copy, modify, and distribute this + * software and its documentation for any purpose, provided that the + * above copyright notice and the following two paragraphs appear in + * all copies of this software. + * + * IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE TO ANY PARTY FOR + * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES + * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN + * IF THE COPYRIGHT HOLDER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + * THE COPYRIGHT HOLDER SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, + * BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND + * FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS + * ON AN "AS IS" BASIS, AND THE COPYRIGHT HOLDER HAS NO OBLIGATION TO + * PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. + */ + +#if !defined(HB_AAT_H_IN) && !defined(HB_NO_SINGLE_HEADER_ERROR) +#error "Include instead." +#endif + +#ifndef HB_AAT_LAYOUT_H +#define HB_AAT_LAYOUT_H + +#include "hb.h" + +#include "hb-ot.h" + +HB_BEGIN_DECLS + +/** + * hb_aat_layout_feature_type_t: + * @HB_AAT_LAYOUT_FEATURE_TYPE_INVALID: Initial, unset feature type + * @HB_AAT_LAYOUT_FEATURE_TYPE_ALL_TYPOGRAPHIC: [All Typographic Features](https://developer.apple.com/fonts/TrueType-Reference-Manual/RM09/AppendixF.html#Type0) + * @HB_AAT_LAYOUT_FEATURE_TYPE_LIGATURES: [Ligatures](https://developer.apple.com/fonts/TrueType-Reference-Manual/RM09/AppendixF.html#Type1) + * @HB_AAT_LAYOUT_FEATURE_TYPE_CURSIVE_CONNECTION: [Cursive Connection](https://developer.apple.com/fonts/TrueType-Reference-Manual/RM09/AppendixF.html#Type2) + * @HB_AAT_LAYOUT_FEATURE_TYPE_LETTER_CASE: [Letter Case](https://developer.apple.com/fonts/TrueType-Reference-Manual/RM09/AppendixF.html#Type3) + * @HB_AAT_LAYOUT_FEATURE_TYPE_VERTICAL_SUBSTITUTION: [Vertical Substitution](https://developer.apple.com/fonts/TrueType-Reference-Manual/RM09/AppendixF.html#Type4) + * @HB_AAT_LAYOUT_FEATURE_TYPE_LINGUISTIC_REARRANGEMENT: [Linguistic Rearrangement](https://developer.apple.com/fonts/TrueType-Reference-Manual/RM09/AppendixF.html#Type5) + * @HB_AAT_LAYOUT_FEATURE_TYPE_NUMBER_SPACING: [Number Spacing](https://developer.apple.com/fonts/TrueType-Reference-Manual/RM09/AppendixF.html#Type6) + * @HB_AAT_LAYOUT_FEATURE_TYPE_SMART_SWASH_TYPE: [Smart Swash](https://developer.apple.com/fonts/TrueType-Reference-Manual/RM09/AppendixF.html#Type8) + * @HB_AAT_LAYOUT_FEATURE_TYPE_DIACRITICS_TYPE: [Diacritics](https://developer.apple.com/fonts/TrueType-Reference-Manual/RM09/AppendixF.html#Type9) + * @HB_AAT_LAYOUT_FEATURE_TYPE_VERTICAL_POSITION: [Vertical Position](https://developer.apple.com/fonts/TrueType-Reference-Manual/RM09/AppendixF.html#Type10) + * @HB_AAT_LAYOUT_FEATURE_TYPE_FRACTIONS: [Fractions](https://developer.apple.com/fonts/TrueType-Reference-Manual/RM09/AppendixF.html#Type11) + * @HB_AAT_LAYOUT_FEATURE_TYPE_OVERLAPPING_CHARACTERS_TYPE: [Overlapping Characters](https://developer.apple.com/fonts/TrueType-Reference-Manual/RM09/AppendixF.html#Type13) + * @HB_AAT_LAYOUT_FEATURE_TYPE_TYPOGRAPHIC_EXTRAS: [Typographic Extras](https://developer.apple.com/fonts/TrueType-Reference-Manual/RM09/AppendixF.html#Type14) + * @HB_AAT_LAYOUT_FEATURE_TYPE_MATHEMATICAL_EXTRAS: [Mathematical Extras](https://developer.apple.com/fonts/TrueType-Reference-Manual/RM09/AppendixF.html#Type15) + * @HB_AAT_LAYOUT_FEATURE_TYPE_ORNAMENT_SETS_TYPE: [Ornament Sets](https://developer.apple.com/fonts/TrueType-Reference-Manual/RM09/AppendixF.html#Type16) + * @HB_AAT_LAYOUT_FEATURE_TYPE_CHARACTER_ALTERNATIVES: [Character Alternatives](https://developer.apple.com/fonts/TrueType-Reference-Manual/RM09/AppendixF.html#Type17) + * @HB_AAT_LAYOUT_FEATURE_TYPE_DESIGN_COMPLEXITY_TYPE: [Design Complexity](https://developer.apple.com/fonts/TrueType-Reference-Manual/RM09/AppendixF.html#Type18) + * @HB_AAT_LAYOUT_FEATURE_TYPE_STYLE_OPTIONS: [Style Options](https://developer.apple.com/fonts/TrueType-Reference-Manual/RM09/AppendixF.html#Type19) + * @HB_AAT_LAYOUT_FEATURE_TYPE_CHARACTER_SHAPE: [Character Shape](https://developer.apple.com/fonts/TrueType-Reference-Manual/RM09/AppendixF.html#Type20) + * @HB_AAT_LAYOUT_FEATURE_TYPE_NUMBER_CASE: [Number Case](https://developer.apple.com/fonts/TrueType-Reference-Manual/RM09/AppendixF.html#Type21) + * @HB_AAT_LAYOUT_FEATURE_TYPE_TEXT_SPACING: [Text Spacing](https://developer.apple.com/fonts/TrueType-Reference-Manual/RM09/AppendixF.html#Type22) + * @HB_AAT_LAYOUT_FEATURE_TYPE_TRANSLITERATION: [Transliteration](https://developer.apple.com/fonts/TrueType-Reference-Manual/RM09/AppendixF.html#Type23) + * @HB_AAT_LAYOUT_FEATURE_TYPE_ANNOTATION_TYPE: [Annotation](https://developer.apple.com/fonts/TrueType-Reference-Manual/RM09/AppendixF.html#Type24) + * @HB_AAT_LAYOUT_FEATURE_TYPE_KANA_SPACING_TYPE: [Kana Spacing](https://developer.apple.com/fonts/TrueType-Reference-Manual/RM09/AppendixF.html#Type25) + * @HB_AAT_LAYOUT_FEATURE_TYPE_IDEOGRAPHIC_SPACING_TYPE: [Ideographic Spacing](https://developer.apple.com/fonts/TrueType-Reference-Manual/RM09/AppendixF.html#Type26) + * @HB_AAT_LAYOUT_FEATURE_TYPE_UNICODE_DECOMPOSITION_TYPE: [Unicode Decomposition](https://developer.apple.com/fonts/TrueType-Reference-Manual/RM09/AppendixF.html#Type27) + * @HB_AAT_LAYOUT_FEATURE_TYPE_RUBY_KANA: [Ruby Kana](https://developer.apple.com/fonts/TrueType-Reference-Manual/RM09/AppendixF.html#Type28) + * @HB_AAT_LAYOUT_FEATURE_TYPE_CJK_SYMBOL_ALTERNATIVES_TYPE: [CJK Symbol Alternatives](https://developer.apple.com/fonts/TrueType-Reference-Manual/RM09/AppendixF.html#Type29) + * @HB_AAT_LAYOUT_FEATURE_TYPE_IDEOGRAPHIC_ALTERNATIVES_TYPE: [Ideographic Alternatives](https://developer.apple.com/fonts/TrueType-Reference-Manual/RM09/AppendixF.html#Type30) + * @HB_AAT_LAYOUT_FEATURE_TYPE_CJK_VERTICAL_ROMAN_PLACEMENT_TYPE: [CJK Vertical Roman Placement](https://developer.apple.com/fonts/TrueType-Reference-Manual/RM09/AppendixF.html#Type31) + * @HB_AAT_LAYOUT_FEATURE_TYPE_ITALIC_CJK_ROMAN: [Italic CJK Roman](https://developer.apple.com/fonts/TrueType-Reference-Manual/RM09/AppendixF.html#Type32) + * @HB_AAT_LAYOUT_FEATURE_TYPE_CASE_SENSITIVE_LAYOUT: [Case Sensitive Layout](https://developer.apple.com/fonts/TrueType-Reference-Manual/RM09/AppendixF.html#Type33) + * @HB_AAT_LAYOUT_FEATURE_TYPE_ALTERNATE_KANA: [Alternate Kana](https://developer.apple.com/fonts/TrueType-Reference-Manual/RM09/AppendixF.html#Type34) + * @HB_AAT_LAYOUT_FEATURE_TYPE_STYLISTIC_ALTERNATIVES: [Stylistic Alternatives](https://developer.apple.com/fonts/TrueType-Reference-Manual/RM09/AppendixF.html#Type35) + * @HB_AAT_LAYOUT_FEATURE_TYPE_CONTEXTUAL_ALTERNATIVES: [Contextual Alternatives](https://developer.apple.com/fonts/TrueType-Reference-Manual/RM09/AppendixF.html#Type36) + * @HB_AAT_LAYOUT_FEATURE_TYPE_LOWER_CASE: [Lower Case](https://developer.apple.com/fonts/TrueType-Reference-Manual/RM09/AppendixF.html#Type37) + * @HB_AAT_LAYOUT_FEATURE_TYPE_UPPER_CASE: [Upper Case](https://developer.apple.com/fonts/TrueType-Reference-Manual/RM09/AppendixF.html#Type38) + * @HB_AAT_LAYOUT_FEATURE_TYPE_LANGUAGE_TAG_TYPE: [Language Tag](https://developer.apple.com/fonts/TrueType-Reference-Manual/RM09/AppendixF.html#Type39) + * @HB_AAT_LAYOUT_FEATURE_TYPE_CJK_ROMAN_SPACING_TYPE: [CJK Roman Spacing](https://developer.apple.com/fonts/TrueType-Reference-Manual/RM09/AppendixF.html#Type103) + * + * The possible feature types defined for AAT shaping, from Apple [Font Feature Registry](https://developer.apple.com/fonts/TrueType-Reference-Manual/RM09/AppendixF.html). + * + * Since: 2.2.0 + */ +typedef enum +{ + HB_AAT_LAYOUT_FEATURE_TYPE_INVALID = 0xFFFF, + + HB_AAT_LAYOUT_FEATURE_TYPE_ALL_TYPOGRAPHIC = 0, + HB_AAT_LAYOUT_FEATURE_TYPE_LIGATURES = 1, + HB_AAT_LAYOUT_FEATURE_TYPE_CURSIVE_CONNECTION = 2, + HB_AAT_LAYOUT_FEATURE_TYPE_LETTER_CASE = 3, + HB_AAT_LAYOUT_FEATURE_TYPE_VERTICAL_SUBSTITUTION = 4, + HB_AAT_LAYOUT_FEATURE_TYPE_LINGUISTIC_REARRANGEMENT = 5, + HB_AAT_LAYOUT_FEATURE_TYPE_NUMBER_SPACING = 6, + HB_AAT_LAYOUT_FEATURE_TYPE_SMART_SWASH_TYPE = 8, + HB_AAT_LAYOUT_FEATURE_TYPE_DIACRITICS_TYPE = 9, + HB_AAT_LAYOUT_FEATURE_TYPE_VERTICAL_POSITION = 10, + HB_AAT_LAYOUT_FEATURE_TYPE_FRACTIONS = 11, + HB_AAT_LAYOUT_FEATURE_TYPE_OVERLAPPING_CHARACTERS_TYPE = 13, + HB_AAT_LAYOUT_FEATURE_TYPE_TYPOGRAPHIC_EXTRAS = 14, + HB_AAT_LAYOUT_FEATURE_TYPE_MATHEMATICAL_EXTRAS = 15, + HB_AAT_LAYOUT_FEATURE_TYPE_ORNAMENT_SETS_TYPE = 16, + HB_AAT_LAYOUT_FEATURE_TYPE_CHARACTER_ALTERNATIVES = 17, + HB_AAT_LAYOUT_FEATURE_TYPE_DESIGN_COMPLEXITY_TYPE = 18, + HB_AAT_LAYOUT_FEATURE_TYPE_STYLE_OPTIONS = 19, + HB_AAT_LAYOUT_FEATURE_TYPE_CHARACTER_SHAPE = 20, + HB_AAT_LAYOUT_FEATURE_TYPE_NUMBER_CASE = 21, + HB_AAT_LAYOUT_FEATURE_TYPE_TEXT_SPACING = 22, + HB_AAT_LAYOUT_FEATURE_TYPE_TRANSLITERATION = 23, + HB_AAT_LAYOUT_FEATURE_TYPE_ANNOTATION_TYPE = 24, + HB_AAT_LAYOUT_FEATURE_TYPE_KANA_SPACING_TYPE = 25, + HB_AAT_LAYOUT_FEATURE_TYPE_IDEOGRAPHIC_SPACING_TYPE = 26, + HB_AAT_LAYOUT_FEATURE_TYPE_UNICODE_DECOMPOSITION_TYPE = 27, + HB_AAT_LAYOUT_FEATURE_TYPE_RUBY_KANA = 28, + HB_AAT_LAYOUT_FEATURE_TYPE_CJK_SYMBOL_ALTERNATIVES_TYPE = 29, + HB_AAT_LAYOUT_FEATURE_TYPE_IDEOGRAPHIC_ALTERNATIVES_TYPE = 30, + HB_AAT_LAYOUT_FEATURE_TYPE_CJK_VERTICAL_ROMAN_PLACEMENT_TYPE = 31, + HB_AAT_LAYOUT_FEATURE_TYPE_ITALIC_CJK_ROMAN = 32, + HB_AAT_LAYOUT_FEATURE_TYPE_CASE_SENSITIVE_LAYOUT = 33, + HB_AAT_LAYOUT_FEATURE_TYPE_ALTERNATE_KANA = 34, + HB_AAT_LAYOUT_FEATURE_TYPE_STYLISTIC_ALTERNATIVES = 35, + HB_AAT_LAYOUT_FEATURE_TYPE_CONTEXTUAL_ALTERNATIVES = 36, + HB_AAT_LAYOUT_FEATURE_TYPE_LOWER_CASE = 37, + HB_AAT_LAYOUT_FEATURE_TYPE_UPPER_CASE = 38, + HB_AAT_LAYOUT_FEATURE_TYPE_LANGUAGE_TAG_TYPE = 39, + HB_AAT_LAYOUT_FEATURE_TYPE_CJK_ROMAN_SPACING_TYPE = 103, + + /*< private >*/ + _HB_AAT_LAYOUT_FEATURE_TYPE_MAX_VALUE = HB_TAG_MAX_SIGNED /*< skip >*/ +} hb_aat_layout_feature_type_t; + +/** + * hb_aat_layout_feature_selector_t: + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_INVALID: Initial, unset feature selector + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_ALL_TYPE_FEATURES_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_ALL_TYPOGRAPHIC + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_ALL_TYPE_FEATURES_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_ALL_TYPOGRAPHIC + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_REQUIRED_LIGATURES_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_LIGATURES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_REQUIRED_LIGATURES_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_LIGATURES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_COMMON_LIGATURES_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_LIGATURES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_COMMON_LIGATURES_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_LIGATURES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_RARE_LIGATURES_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_LIGATURES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_RARE_LIGATURES_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_LIGATURES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_LOGOS_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_LIGATURES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_LOGOS_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_LIGATURES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_REBUS_PICTURES_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_LIGATURES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_REBUS_PICTURES_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_LIGATURES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_DIPHTHONG_LIGATURES_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_LIGATURES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_DIPHTHONG_LIGATURES_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_LIGATURES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_SQUARED_LIGATURES_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_LIGATURES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_SQUARED_LIGATURES_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_LIGATURES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_ABBREV_SQUARED_LIGATURES_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_LIGATURES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_ABBREV_SQUARED_LIGATURES_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_LIGATURES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_SYMBOL_LIGATURES_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_LIGATURES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_SYMBOL_LIGATURES_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_LIGATURES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_CONTEXTUAL_LIGATURES_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_LIGATURES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_CONTEXTUAL_LIGATURES_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_LIGATURES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_HISTORICAL_LIGATURES_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_LIGATURES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_HISTORICAL_LIGATURES_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_LIGATURES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_UNCONNECTED: for #HB_AAT_LAYOUT_FEATURE_TYPE_LIGATURES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_PARTIALLY_CONNECTED: for #HB_AAT_LAYOUT_FEATURE_TYPE_LIGATURES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_CURSIVE: for #HB_AAT_LAYOUT_FEATURE_TYPE_LIGATURES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_UPPER_AND_LOWER_CASE: Deprecated + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_ALL_CAPS: Deprecated + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_ALL_LOWER_CASE: Deprecated + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_SMALL_CAPS: Deprecated + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_INITIAL_CAPS: Deprecated + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_INITIAL_CAPS_AND_SMALL_CAPS: Deprecated + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_SUBSTITUTE_VERTICAL_FORMS_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_VERTICAL_SUBSTITUTION + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_SUBSTITUTE_VERTICAL_FORMS_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_VERTICAL_SUBSTITUTION + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_LINGUISTIC_REARRANGEMENT_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_LINGUISTIC_REARRANGEMENT + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_LINGUISTIC_REARRANGEMENT_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_LINGUISTIC_REARRANGEMENT + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_MONOSPACED_NUMBERS: for #HB_AAT_LAYOUT_FEATURE_TYPE_NUMBER_SPACING + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_PROPORTIONAL_NUMBERS: for #HB_AAT_LAYOUT_FEATURE_TYPE_NUMBER_SPACING + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_THIRD_WIDTH_NUMBERS: for #HB_AAT_LAYOUT_FEATURE_TYPE_NUMBER_SPACING + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_QUARTER_WIDTH_NUMBERS: for #HB_AAT_LAYOUT_FEATURE_TYPE_NUMBER_SPACING + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_WORD_INITIAL_SWASHES_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_SMART_SWASH_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_WORD_INITIAL_SWASHES_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_SMART_SWASH_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_WORD_FINAL_SWASHES_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_SMART_SWASH_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_WORD_FINAL_SWASHES_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_SMART_SWASH_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_LINE_INITIAL_SWASHES_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_SMART_SWASH_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_LINE_INITIAL_SWASHES_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_SMART_SWASH_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_LINE_FINAL_SWASHES_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_SMART_SWASH_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_LINE_FINAL_SWASHES_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_SMART_SWASH_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_NON_FINAL_SWASHES_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_SMART_SWASH_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_NON_FINAL_SWASHES_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_SMART_SWASH_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_SHOW_DIACRITICS: for #HB_AAT_LAYOUT_FEATURE_TYPE_DIACRITICS_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_HIDE_DIACRITICS: for #HB_AAT_LAYOUT_FEATURE_TYPE_DIACRITICS_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_DECOMPOSE_DIACRITICS: for #HB_AAT_LAYOUT_FEATURE_TYPE_DIACRITICS_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_NORMAL_POSITION: for #HB_AAT_LAYOUT_FEATURE_TYPE_VERTICAL_POSITION + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_SUPERIORS: for #HB_AAT_LAYOUT_FEATURE_TYPE_VERTICAL_POSITION + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_INFERIORS: for #HB_AAT_LAYOUT_FEATURE_TYPE_VERTICAL_POSITION + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_ORDINALS: for #HB_AAT_LAYOUT_FEATURE_TYPE_VERTICAL_POSITION + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_SCIENTIFIC_INFERIORS: for #HB_AAT_LAYOUT_FEATURE_TYPE_VERTICAL_POSITION + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_NO_FRACTIONS: for #HB_AAT_LAYOUT_FEATURE_TYPE_FRACTIONS + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_VERTICAL_FRACTIONS: for #HB_AAT_LAYOUT_FEATURE_TYPE_FRACTIONS + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_DIAGONAL_FRACTIONS: for #HB_AAT_LAYOUT_FEATURE_TYPE_FRACTIONS + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_PREVENT_OVERLAP_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_OVERLAPPING_CHARACTERS_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_PREVENT_OVERLAP_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_OVERLAPPING_CHARACTERS_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_HYPHENS_TO_EM_DASH_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_TYPOGRAPHIC_EXTRAS + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_HYPHENS_TO_EM_DASH_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_TYPOGRAPHIC_EXTRAS + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_HYPHEN_TO_EN_DASH_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_TYPOGRAPHIC_EXTRAS + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_HYPHEN_TO_EN_DASH_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_TYPOGRAPHIC_EXTRAS + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_SLASHED_ZERO_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_TYPOGRAPHIC_EXTRAS + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_SLASHED_ZERO_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_TYPOGRAPHIC_EXTRAS + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_FORM_INTERROBANG_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_TYPOGRAPHIC_EXTRAS + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_FORM_INTERROBANG_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_TYPOGRAPHIC_EXTRAS + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_SMART_QUOTES_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_TYPOGRAPHIC_EXTRAS + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_SMART_QUOTES_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_TYPOGRAPHIC_EXTRAS + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_PERIODS_TO_ELLIPSIS_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_TYPOGRAPHIC_EXTRAS + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_PERIODS_TO_ELLIPSIS_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_TYPOGRAPHIC_EXTRAS + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_HYPHEN_TO_MINUS_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_MATHEMATICAL_EXTRAS + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_HYPHEN_TO_MINUS_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_MATHEMATICAL_EXTRAS + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_ASTERISK_TO_MULTIPLY_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_MATHEMATICAL_EXTRAS + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_ASTERISK_TO_MULTIPLY_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_MATHEMATICAL_EXTRAS + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_SLASH_TO_DIVIDE_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_MATHEMATICAL_EXTRAS + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_SLASH_TO_DIVIDE_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_MATHEMATICAL_EXTRAS + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_INEQUALITY_LIGATURES_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_MATHEMATICAL_EXTRAS + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_INEQUALITY_LIGATURES_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_MATHEMATICAL_EXTRAS + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_EXPONENTS_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_MATHEMATICAL_EXTRAS + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_EXPONENTS_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_MATHEMATICAL_EXTRAS + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_MATHEMATICAL_GREEK_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_MATHEMATICAL_EXTRAS + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_MATHEMATICAL_GREEK_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_MATHEMATICAL_EXTRAS + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_NO_ORNAMENTS: for #HB_AAT_LAYOUT_FEATURE_TYPE_ORNAMENT_SETS_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_DINGBATS: for #HB_AAT_LAYOUT_FEATURE_TYPE_ORNAMENT_SETS_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_PI_CHARACTERS: for #HB_AAT_LAYOUT_FEATURE_TYPE_ORNAMENT_SETS_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_FLEURONS: for #HB_AAT_LAYOUT_FEATURE_TYPE_ORNAMENT_SETS_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_DECORATIVE_BORDERS: for #HB_AAT_LAYOUT_FEATURE_TYPE_ORNAMENT_SETS_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_INTERNATIONAL_SYMBOLS: for #HB_AAT_LAYOUT_FEATURE_TYPE_ORNAMENT_SETS_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_MATH_SYMBOLS: for #HB_AAT_LAYOUT_FEATURE_TYPE_ORNAMENT_SETS_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_NO_ALTERNATES: for #HB_AAT_LAYOUT_FEATURE_TYPE_CHARACTER_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_DESIGN_LEVEL1: for #HB_AAT_LAYOUT_FEATURE_TYPE_DESIGN_COMPLEXITY_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_DESIGN_LEVEL2: for #HB_AAT_LAYOUT_FEATURE_TYPE_DESIGN_COMPLEXITY_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_DESIGN_LEVEL3: for #HB_AAT_LAYOUT_FEATURE_TYPE_DESIGN_COMPLEXITY_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_DESIGN_LEVEL4: for #HB_AAT_LAYOUT_FEATURE_TYPE_DESIGN_COMPLEXITY_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_DESIGN_LEVEL5: for #HB_AAT_LAYOUT_FEATURE_TYPE_DESIGN_COMPLEXITY_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_NO_STYLE_OPTIONS: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLE_OPTIONS + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_DISPLAY_TEXT: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLE_OPTIONS + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_ENGRAVED_TEXT: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLE_OPTIONS + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_ILLUMINATED_CAPS: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLE_OPTIONS + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_TITLING_CAPS: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLE_OPTIONS + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_TALL_CAPS: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLE_OPTIONS + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_TRADITIONAL_CHARACTERS: for #HB_AAT_LAYOUT_FEATURE_TYPE_CHARACTER_SHAPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_SIMPLIFIED_CHARACTERS: for #HB_AAT_LAYOUT_FEATURE_TYPE_CHARACTER_SHAPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_JIS1978_CHARACTERS: for #HB_AAT_LAYOUT_FEATURE_TYPE_CHARACTER_SHAPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_JIS1983_CHARACTERS: for #HB_AAT_LAYOUT_FEATURE_TYPE_CHARACTER_SHAPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_JIS1990_CHARACTERS: for #HB_AAT_LAYOUT_FEATURE_TYPE_CHARACTER_SHAPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_TRADITIONAL_ALT_ONE: for #HB_AAT_LAYOUT_FEATURE_TYPE_CHARACTER_SHAPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_TRADITIONAL_ALT_TWO: for #HB_AAT_LAYOUT_FEATURE_TYPE_CHARACTER_SHAPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_TRADITIONAL_ALT_THREE: for #HB_AAT_LAYOUT_FEATURE_TYPE_CHARACTER_SHAPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_TRADITIONAL_ALT_FOUR: for #HB_AAT_LAYOUT_FEATURE_TYPE_CHARACTER_SHAPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_TRADITIONAL_ALT_FIVE: for #HB_AAT_LAYOUT_FEATURE_TYPE_CHARACTER_SHAPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_EXPERT_CHARACTERS: for #HB_AAT_LAYOUT_FEATURE_TYPE_CHARACTER_SHAPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_JIS2004_CHARACTERS: for #HB_AAT_LAYOUT_FEATURE_TYPE_CHARACTER_SHAPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_HOJO_CHARACTERS: for #HB_AAT_LAYOUT_FEATURE_TYPE_CHARACTER_SHAPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_NLCCHARACTERS: for #HB_AAT_LAYOUT_FEATURE_TYPE_CHARACTER_SHAPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_TRADITIONAL_NAMES_CHARACTERS: for #HB_AAT_LAYOUT_FEATURE_TYPE_CHARACTER_SHAPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_LOWER_CASE_NUMBERS: for #HB_AAT_LAYOUT_FEATURE_TYPE_NUMBER_CASE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_UPPER_CASE_NUMBERS: for #HB_AAT_LAYOUT_FEATURE_TYPE_NUMBER_CASE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_PROPORTIONAL_TEXT: for #HB_AAT_LAYOUT_FEATURE_TYPE_TEXT_SPACING + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_MONOSPACED_TEXT: for #HB_AAT_LAYOUT_FEATURE_TYPE_TEXT_SPACING + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_HALF_WIDTH_TEXT: for #HB_AAT_LAYOUT_FEATURE_TYPE_TEXT_SPACING + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_THIRD_WIDTH_TEXT: for #HB_AAT_LAYOUT_FEATURE_TYPE_TEXT_SPACING + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_QUARTER_WIDTH_TEXT: for #HB_AAT_LAYOUT_FEATURE_TYPE_TEXT_SPACING + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_ALT_PROPORTIONAL_TEXT: for #HB_AAT_LAYOUT_FEATURE_TYPE_TEXT_SPACING + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_ALT_HALF_WIDTH_TEXT: for #HB_AAT_LAYOUT_FEATURE_TYPE_TEXT_SPACING + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_NO_TRANSLITERATION: for #HB_AAT_LAYOUT_FEATURE_TYPE_TRANSLITERATION + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_HANJA_TO_HANGUL: for #HB_AAT_LAYOUT_FEATURE_TYPE_TRANSLITERATION + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_HIRAGANA_TO_KATAKANA: for #HB_AAT_LAYOUT_FEATURE_TYPE_TRANSLITERATION + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_KATAKANA_TO_HIRAGANA: for #HB_AAT_LAYOUT_FEATURE_TYPE_TRANSLITERATION + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_KANA_TO_ROMANIZATION: for #HB_AAT_LAYOUT_FEATURE_TYPE_TRANSLITERATION + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_ROMANIZATION_TO_HIRAGANA: for #HB_AAT_LAYOUT_FEATURE_TYPE_TRANSLITERATION + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_ROMANIZATION_TO_KATAKANA: for #HB_AAT_LAYOUT_FEATURE_TYPE_TRANSLITERATION + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_HANJA_TO_HANGUL_ALT_ONE: for #HB_AAT_LAYOUT_FEATURE_TYPE_TRANSLITERATION + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_HANJA_TO_HANGUL_ALT_TWO: for #HB_AAT_LAYOUT_FEATURE_TYPE_TRANSLITERATION + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_HANJA_TO_HANGUL_ALT_THREE: for #HB_AAT_LAYOUT_FEATURE_TYPE_TRANSLITERATION + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_NO_ANNOTATION: for #HB_AAT_LAYOUT_FEATURE_TYPE_ANNOTATION_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_BOX_ANNOTATION: for #HB_AAT_LAYOUT_FEATURE_TYPE_ANNOTATION_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_ROUNDED_BOX_ANNOTATION: for #HB_AAT_LAYOUT_FEATURE_TYPE_ANNOTATION_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_CIRCLE_ANNOTATION: for #HB_AAT_LAYOUT_FEATURE_TYPE_ANNOTATION_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_INVERTED_CIRCLE_ANNOTATION: for #HB_AAT_LAYOUT_FEATURE_TYPE_ANNOTATION_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_PARENTHESIS_ANNOTATION: for #HB_AAT_LAYOUT_FEATURE_TYPE_ANNOTATION_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_PERIOD_ANNOTATION: for #HB_AAT_LAYOUT_FEATURE_TYPE_ANNOTATION_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_ROMAN_NUMERAL_ANNOTATION: for #HB_AAT_LAYOUT_FEATURE_TYPE_ANNOTATION_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_DIAMOND_ANNOTATION: for #HB_AAT_LAYOUT_FEATURE_TYPE_ANNOTATION_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_INVERTED_BOX_ANNOTATION: for #HB_AAT_LAYOUT_FEATURE_TYPE_ANNOTATION_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_INVERTED_ROUNDED_BOX_ANNOTATION: for #HB_AAT_LAYOUT_FEATURE_TYPE_ANNOTATION_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_FULL_WIDTH_KANA: for #HB_AAT_LAYOUT_FEATURE_TYPE_KANA_SPACING_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_PROPORTIONAL_KANA: for #HB_AAT_LAYOUT_FEATURE_TYPE_KANA_SPACING_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_FULL_WIDTH_IDEOGRAPHS: for #HB_AAT_LAYOUT_FEATURE_TYPE_IDEOGRAPHIC_SPACING_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_PROPORTIONAL_IDEOGRAPHS: for #HB_AAT_LAYOUT_FEATURE_TYPE_IDEOGRAPHIC_SPACING_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_HALF_WIDTH_IDEOGRAPHS: for #HB_AAT_LAYOUT_FEATURE_TYPE_IDEOGRAPHIC_SPACING_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_CANONICAL_COMPOSITION_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_UNICODE_DECOMPOSITION_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_CANONICAL_COMPOSITION_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_UNICODE_DECOMPOSITION_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_COMPATIBILITY_COMPOSITION_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_UNICODE_DECOMPOSITION_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_COMPATIBILITY_COMPOSITION_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_UNICODE_DECOMPOSITION_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_TRANSCODING_COMPOSITION_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_UNICODE_DECOMPOSITION_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_TRANSCODING_COMPOSITION_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_UNICODE_DECOMPOSITION_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_NO_RUBY_KANA: Deprecated; use #HB_AAT_LAYOUT_FEATURE_SELECTOR_RUBY_KANA_OFF instead + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_RUBY_KANA: Deprecated; use #HB_AAT_LAYOUT_FEATURE_SELECTOR_RUBY_KANA_ON instead + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_RUBY_KANA_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_RUBY_KANA + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_RUBY_KANA_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_RUBY_KANA + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_NO_CJK_SYMBOL_ALTERNATIVES: for #HB_AAT_LAYOUT_FEATURE_TYPE_CJK_SYMBOL_ALTERNATIVES_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_CJK_SYMBOL_ALT_ONE: for #HB_AAT_LAYOUT_FEATURE_TYPE_CJK_SYMBOL_ALTERNATIVES_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_CJK_SYMBOL_ALT_TWO: for #HB_AAT_LAYOUT_FEATURE_TYPE_CJK_SYMBOL_ALTERNATIVES_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_CJK_SYMBOL_ALT_THREE: for #HB_AAT_LAYOUT_FEATURE_TYPE_CJK_SYMBOL_ALTERNATIVES_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_CJK_SYMBOL_ALT_FOUR: for #HB_AAT_LAYOUT_FEATURE_TYPE_CJK_SYMBOL_ALTERNATIVES_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_CJK_SYMBOL_ALT_FIVE: for #HB_AAT_LAYOUT_FEATURE_TYPE_CJK_SYMBOL_ALTERNATIVES_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_NO_IDEOGRAPHIC_ALTERNATIVES: for #HB_AAT_LAYOUT_FEATURE_TYPE_IDEOGRAPHIC_ALTERNATIVES_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_IDEOGRAPHIC_ALT_ONE: for #HB_AAT_LAYOUT_FEATURE_TYPE_IDEOGRAPHIC_ALTERNATIVES_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_IDEOGRAPHIC_ALT_TWO: for #HB_AAT_LAYOUT_FEATURE_TYPE_IDEOGRAPHIC_ALTERNATIVES_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_IDEOGRAPHIC_ALT_THREE: for #HB_AAT_LAYOUT_FEATURE_TYPE_IDEOGRAPHIC_ALTERNATIVES_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_IDEOGRAPHIC_ALT_FOUR: for #HB_AAT_LAYOUT_FEATURE_TYPE_IDEOGRAPHIC_ALTERNATIVES_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_IDEOGRAPHIC_ALT_FIVE: for #HB_AAT_LAYOUT_FEATURE_TYPE_IDEOGRAPHIC_ALTERNATIVES_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_CJK_VERTICAL_ROMAN_CENTERED: for #HB_AAT_LAYOUT_FEATURE_TYPE_CJK_VERTICAL_ROMAN_PLACEMENT_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_CJK_VERTICAL_ROMAN_HBASELINE: for #HB_AAT_LAYOUT_FEATURE_TYPE_CJK_VERTICAL_ROMAN_PLACEMENT_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_NO_CJK_ITALIC_ROMAN: Deprecated; use #HB_AAT_LAYOUT_FEATURE_SELECTOR_CJK_ITALIC_ROMAN_OFF instead + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_CJK_ITALIC_ROMAN: Deprecated; use #HB_AAT_LAYOUT_FEATURE_SELECTOR_CJK_ITALIC_ROMAN_ON instead + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_CJK_ITALIC_ROMAN_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_ITALIC_CJK_ROMAN + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_CJK_ITALIC_ROMAN_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_ITALIC_CJK_ROMAN + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_CASE_SENSITIVE_LAYOUT_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_CASE_SENSITIVE_LAYOUT + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_CASE_SENSITIVE_LAYOUT_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_CASE_SENSITIVE_LAYOUT + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_CASE_SENSITIVE_SPACING_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_CASE_SENSITIVE_LAYOUT + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_CASE_SENSITIVE_SPACING_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_CASE_SENSITIVE_LAYOUT + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_ALTERNATE_HORIZ_KANA_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_ALTERNATE_KANA + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_ALTERNATE_HORIZ_KANA_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_ALTERNATE_KANA + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_ALTERNATE_VERT_KANA_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_ALTERNATE_KANA + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_ALTERNATE_VERT_KANA_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_ALTERNATE_KANA + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_NO_STYLISTIC_ALTERNATES: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLISTIC_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_ONE_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLISTIC_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_ONE_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLISTIC_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_TWO_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLISTIC_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_TWO_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLISTIC_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_THREE_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLISTIC_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_THREE_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLISTIC_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_FOUR_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLISTIC_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_FOUR_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLISTIC_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_FIVE_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLISTIC_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_FIVE_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLISTIC_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_SIX_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLISTIC_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_SIX_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLISTIC_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_SEVEN_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLISTIC_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_SEVEN_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLISTIC_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_EIGHT_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLISTIC_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_EIGHT_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLISTIC_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_NINE_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLISTIC_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_NINE_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLISTIC_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_TEN_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLISTIC_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_TEN_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLISTIC_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_ELEVEN_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLISTIC_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_ELEVEN_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLISTIC_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_TWELVE_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLISTIC_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_TWELVE_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLISTIC_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_THIRTEEN_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLISTIC_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_THIRTEEN_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLISTIC_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_FOURTEEN_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLISTIC_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_FOURTEEN_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLISTIC_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_FIFTEEN_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLISTIC_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_FIFTEEN_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLISTIC_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_SIXTEEN_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLISTIC_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_SIXTEEN_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLISTIC_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_SEVENTEEN_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLISTIC_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_SEVENTEEN_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLISTIC_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_EIGHTEEN_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLISTIC_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_EIGHTEEN_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLISTIC_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_NINETEEN_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLISTIC_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_NINETEEN_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLISTIC_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_TWENTY_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLISTIC_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_TWENTY_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLISTIC_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_CONTEXTUAL_ALTERNATES_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_CONTEXTUAL_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_CONTEXTUAL_ALTERNATES_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_CONTEXTUAL_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_SWASH_ALTERNATES_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_CONTEXTUAL_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_SWASH_ALTERNATES_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_CONTEXTUAL_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_CONTEXTUAL_SWASH_ALTERNATES_ON: for #HB_AAT_LAYOUT_FEATURE_TYPE_CONTEXTUAL_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_CONTEXTUAL_SWASH_ALTERNATES_OFF: for #HB_AAT_LAYOUT_FEATURE_TYPE_CONTEXTUAL_ALTERNATIVES + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_DEFAULT_LOWER_CASE: for #HB_AAT_LAYOUT_FEATURE_TYPE_LOWER_CASE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_LOWER_CASE_SMALL_CAPS: for #HB_AAT_LAYOUT_FEATURE_TYPE_LOWER_CASE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_LOWER_CASE_PETITE_CAPS: for #HB_AAT_LAYOUT_FEATURE_TYPE_LOWER_CASE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_DEFAULT_UPPER_CASE: for #HB_AAT_LAYOUT_FEATURE_TYPE_UPPER_CASE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_UPPER_CASE_SMALL_CAPS: for #HB_AAT_LAYOUT_FEATURE_TYPE_UPPER_CASE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_UPPER_CASE_PETITE_CAPS: for #HB_AAT_LAYOUT_FEATURE_TYPE_UPPER_CASE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_HALF_WIDTH_CJK_ROMAN: for #HB_AAT_LAYOUT_FEATURE_TYPE_CJK_ROMAN_SPACING_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_PROPORTIONAL_CJK_ROMAN: for #HB_AAT_LAYOUT_FEATURE_TYPE_CJK_ROMAN_SPACING_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_DEFAULT_CJK_ROMAN: for #HB_AAT_LAYOUT_FEATURE_TYPE_CJK_ROMAN_SPACING_TYPE + * @HB_AAT_LAYOUT_FEATURE_SELECTOR_FULL_WIDTH_CJK_ROMAN: for #HB_AAT_LAYOUT_FEATURE_TYPE_CJK_ROMAN_SPACING_TYPE + * + * The selectors defined for specifying AAT feature settings. + * + * Since: 2.2.0 + */ +typedef enum +{ + HB_AAT_LAYOUT_FEATURE_SELECTOR_INVALID = 0xFFFF, + + /* Selectors for #HB_AAT_LAYOUT_FEATURE_TYPE_ALL_TYPOGRAPHIC */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_ALL_TYPE_FEATURES_ON = 0, + HB_AAT_LAYOUT_FEATURE_SELECTOR_ALL_TYPE_FEATURES_OFF = 1, + + /* Selectors for #HB_AAT_LAYOUT_FEATURE_TYPE_LIGATURES */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_REQUIRED_LIGATURES_ON = 0, + HB_AAT_LAYOUT_FEATURE_SELECTOR_REQUIRED_LIGATURES_OFF = 1, + HB_AAT_LAYOUT_FEATURE_SELECTOR_COMMON_LIGATURES_ON = 2, + HB_AAT_LAYOUT_FEATURE_SELECTOR_COMMON_LIGATURES_OFF = 3, + HB_AAT_LAYOUT_FEATURE_SELECTOR_RARE_LIGATURES_ON = 4, + HB_AAT_LAYOUT_FEATURE_SELECTOR_RARE_LIGATURES_OFF = 5, + HB_AAT_LAYOUT_FEATURE_SELECTOR_LOGOS_ON = 6, + HB_AAT_LAYOUT_FEATURE_SELECTOR_LOGOS_OFF = 7, + HB_AAT_LAYOUT_FEATURE_SELECTOR_REBUS_PICTURES_ON = 8, + HB_AAT_LAYOUT_FEATURE_SELECTOR_REBUS_PICTURES_OFF = 9, + HB_AAT_LAYOUT_FEATURE_SELECTOR_DIPHTHONG_LIGATURES_ON = 10, + HB_AAT_LAYOUT_FEATURE_SELECTOR_DIPHTHONG_LIGATURES_OFF = 11, + HB_AAT_LAYOUT_FEATURE_SELECTOR_SQUARED_LIGATURES_ON = 12, + HB_AAT_LAYOUT_FEATURE_SELECTOR_SQUARED_LIGATURES_OFF = 13, + HB_AAT_LAYOUT_FEATURE_SELECTOR_ABBREV_SQUARED_LIGATURES_ON = 14, + HB_AAT_LAYOUT_FEATURE_SELECTOR_ABBREV_SQUARED_LIGATURES_OFF = 15, + HB_AAT_LAYOUT_FEATURE_SELECTOR_SYMBOL_LIGATURES_ON = 16, + HB_AAT_LAYOUT_FEATURE_SELECTOR_SYMBOL_LIGATURES_OFF = 17, + HB_AAT_LAYOUT_FEATURE_SELECTOR_CONTEXTUAL_LIGATURES_ON = 18, + HB_AAT_LAYOUT_FEATURE_SELECTOR_CONTEXTUAL_LIGATURES_OFF = 19, + HB_AAT_LAYOUT_FEATURE_SELECTOR_HISTORICAL_LIGATURES_ON = 20, + HB_AAT_LAYOUT_FEATURE_SELECTOR_HISTORICAL_LIGATURES_OFF = 21, + + /* Selectors for #HB_AAT_LAYOUT_FEATURE_TYPE_LIGATURES */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_UNCONNECTED = 0, + HB_AAT_LAYOUT_FEATURE_SELECTOR_PARTIALLY_CONNECTED = 1, + HB_AAT_LAYOUT_FEATURE_SELECTOR_CURSIVE = 2, + + /* Selectors for #HB_AAT_LAYOUT_FEATURE_TYPE_LETTER_CASE */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_UPPER_AND_LOWER_CASE = 0, /* deprecated */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_ALL_CAPS = 1, /* deprecated */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_ALL_LOWER_CASE = 2, /* deprecated */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_SMALL_CAPS = 3, /* deprecated */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_INITIAL_CAPS = 4, /* deprecated */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_INITIAL_CAPS_AND_SMALL_CAPS = 5, /* deprecated */ + + /* Selectors for #HB_AAT_LAYOUT_FEATURE_TYPE_VERTICAL_SUBSTITUTION */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_SUBSTITUTE_VERTICAL_FORMS_ON = 0, + HB_AAT_LAYOUT_FEATURE_SELECTOR_SUBSTITUTE_VERTICAL_FORMS_OFF = 1, + + /* Selectors for #HB_AAT_LAYOUT_FEATURE_TYPE_LINGUISTIC_REARRANGEMENT */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_LINGUISTIC_REARRANGEMENT_ON = 0, + HB_AAT_LAYOUT_FEATURE_SELECTOR_LINGUISTIC_REARRANGEMENT_OFF = 1, + + /* Selectors for #HB_AAT_LAYOUT_FEATURE_TYPE_NUMBER_SPACING */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_MONOSPACED_NUMBERS = 0, + HB_AAT_LAYOUT_FEATURE_SELECTOR_PROPORTIONAL_NUMBERS = 1, + HB_AAT_LAYOUT_FEATURE_SELECTOR_THIRD_WIDTH_NUMBERS = 2, + HB_AAT_LAYOUT_FEATURE_SELECTOR_QUARTER_WIDTH_NUMBERS = 3, + + /* Selectors for #HB_AAT_LAYOUT_FEATURE_TYPE_SMART_SWASH_TYPE */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_WORD_INITIAL_SWASHES_ON = 0, + HB_AAT_LAYOUT_FEATURE_SELECTOR_WORD_INITIAL_SWASHES_OFF = 1, + HB_AAT_LAYOUT_FEATURE_SELECTOR_WORD_FINAL_SWASHES_ON = 2, + HB_AAT_LAYOUT_FEATURE_SELECTOR_WORD_FINAL_SWASHES_OFF = 3, + HB_AAT_LAYOUT_FEATURE_SELECTOR_LINE_INITIAL_SWASHES_ON = 4, + HB_AAT_LAYOUT_FEATURE_SELECTOR_LINE_INITIAL_SWASHES_OFF = 5, + HB_AAT_LAYOUT_FEATURE_SELECTOR_LINE_FINAL_SWASHES_ON = 6, + HB_AAT_LAYOUT_FEATURE_SELECTOR_LINE_FINAL_SWASHES_OFF = 7, + HB_AAT_LAYOUT_FEATURE_SELECTOR_NON_FINAL_SWASHES_ON = 8, + HB_AAT_LAYOUT_FEATURE_SELECTOR_NON_FINAL_SWASHES_OFF = 9, + + /* Selectors for #HB_AAT_LAYOUT_FEATURE_TYPE_DIACRITICS_TYPE */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_SHOW_DIACRITICS = 0, + HB_AAT_LAYOUT_FEATURE_SELECTOR_HIDE_DIACRITICS = 1, + HB_AAT_LAYOUT_FEATURE_SELECTOR_DECOMPOSE_DIACRITICS = 2, + + /* Selectors for #HB_AAT_LAYOUT_FEATURE_TYPE_VERTICAL_POSITION */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_NORMAL_POSITION = 0, + HB_AAT_LAYOUT_FEATURE_SELECTOR_SUPERIORS = 1, + HB_AAT_LAYOUT_FEATURE_SELECTOR_INFERIORS = 2, + HB_AAT_LAYOUT_FEATURE_SELECTOR_ORDINALS = 3, + HB_AAT_LAYOUT_FEATURE_SELECTOR_SCIENTIFIC_INFERIORS = 4, + + /* Selectors for #HB_AAT_LAYOUT_FEATURE_TYPE_FRACTIONS */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_NO_FRACTIONS = 0, + HB_AAT_LAYOUT_FEATURE_SELECTOR_VERTICAL_FRACTIONS = 1, + HB_AAT_LAYOUT_FEATURE_SELECTOR_DIAGONAL_FRACTIONS = 2, + + /* Selectors for #HB_AAT_LAYOUT_FEATURE_TYPE_OVERLAPPING_CHARACTERS_TYPE */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_PREVENT_OVERLAP_ON = 0, + HB_AAT_LAYOUT_FEATURE_SELECTOR_PREVENT_OVERLAP_OFF = 1, + + /* Selectors for #HB_AAT_LAYOUT_FEATURE_TYPE_TYPOGRAPHIC_EXTRAS */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_HYPHENS_TO_EM_DASH_ON = 0, + HB_AAT_LAYOUT_FEATURE_SELECTOR_HYPHENS_TO_EM_DASH_OFF = 1, + HB_AAT_LAYOUT_FEATURE_SELECTOR_HYPHEN_TO_EN_DASH_ON = 2, + HB_AAT_LAYOUT_FEATURE_SELECTOR_HYPHEN_TO_EN_DASH_OFF = 3, + HB_AAT_LAYOUT_FEATURE_SELECTOR_SLASHED_ZERO_ON = 4, + HB_AAT_LAYOUT_FEATURE_SELECTOR_SLASHED_ZERO_OFF = 5, + HB_AAT_LAYOUT_FEATURE_SELECTOR_FORM_INTERROBANG_ON = 6, + HB_AAT_LAYOUT_FEATURE_SELECTOR_FORM_INTERROBANG_OFF = 7, + HB_AAT_LAYOUT_FEATURE_SELECTOR_SMART_QUOTES_ON = 8, + HB_AAT_LAYOUT_FEATURE_SELECTOR_SMART_QUOTES_OFF = 9, + HB_AAT_LAYOUT_FEATURE_SELECTOR_PERIODS_TO_ELLIPSIS_ON = 10, + HB_AAT_LAYOUT_FEATURE_SELECTOR_PERIODS_TO_ELLIPSIS_OFF = 11, + + /* Selectors for #HB_AAT_LAYOUT_FEATURE_TYPE_MATHEMATICAL_EXTRAS */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_HYPHEN_TO_MINUS_ON = 0, + HB_AAT_LAYOUT_FEATURE_SELECTOR_HYPHEN_TO_MINUS_OFF = 1, + HB_AAT_LAYOUT_FEATURE_SELECTOR_ASTERISK_TO_MULTIPLY_ON = 2, + HB_AAT_LAYOUT_FEATURE_SELECTOR_ASTERISK_TO_MULTIPLY_OFF = 3, + HB_AAT_LAYOUT_FEATURE_SELECTOR_SLASH_TO_DIVIDE_ON = 4, + HB_AAT_LAYOUT_FEATURE_SELECTOR_SLASH_TO_DIVIDE_OFF = 5, + HB_AAT_LAYOUT_FEATURE_SELECTOR_INEQUALITY_LIGATURES_ON = 6, + HB_AAT_LAYOUT_FEATURE_SELECTOR_INEQUALITY_LIGATURES_OFF = 7, + HB_AAT_LAYOUT_FEATURE_SELECTOR_EXPONENTS_ON = 8, + HB_AAT_LAYOUT_FEATURE_SELECTOR_EXPONENTS_OFF = 9, + HB_AAT_LAYOUT_FEATURE_SELECTOR_MATHEMATICAL_GREEK_ON = 10, + HB_AAT_LAYOUT_FEATURE_SELECTOR_MATHEMATICAL_GREEK_OFF = 11, + + /* Selectors for #HB_AAT_LAYOUT_FEATURE_TYPE_ORNAMENT_SETS_TYPE */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_NO_ORNAMENTS = 0, + HB_AAT_LAYOUT_FEATURE_SELECTOR_DINGBATS = 1, + HB_AAT_LAYOUT_FEATURE_SELECTOR_PI_CHARACTERS = 2, + HB_AAT_LAYOUT_FEATURE_SELECTOR_FLEURONS = 3, + HB_AAT_LAYOUT_FEATURE_SELECTOR_DECORATIVE_BORDERS = 4, + HB_AAT_LAYOUT_FEATURE_SELECTOR_INTERNATIONAL_SYMBOLS = 5, + HB_AAT_LAYOUT_FEATURE_SELECTOR_MATH_SYMBOLS = 6, + + /* Selectors for #HB_AAT_LAYOUT_FEATURE_TYPE_CHARACTER_ALTERNATIVES */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_NO_ALTERNATES = 0, + + /* Selectors for #HB_AAT_LAYOUT_FEATURE_TYPE_DESIGN_COMPLEXITY_TYPE */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_DESIGN_LEVEL1 = 0, + HB_AAT_LAYOUT_FEATURE_SELECTOR_DESIGN_LEVEL2 = 1, + HB_AAT_LAYOUT_FEATURE_SELECTOR_DESIGN_LEVEL3 = 2, + HB_AAT_LAYOUT_FEATURE_SELECTOR_DESIGN_LEVEL4 = 3, + HB_AAT_LAYOUT_FEATURE_SELECTOR_DESIGN_LEVEL5 = 4, + + /* Selectors for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLE_OPTIONS */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_NO_STYLE_OPTIONS = 0, + HB_AAT_LAYOUT_FEATURE_SELECTOR_DISPLAY_TEXT = 1, + HB_AAT_LAYOUT_FEATURE_SELECTOR_ENGRAVED_TEXT = 2, + HB_AAT_LAYOUT_FEATURE_SELECTOR_ILLUMINATED_CAPS = 3, + HB_AAT_LAYOUT_FEATURE_SELECTOR_TITLING_CAPS = 4, + HB_AAT_LAYOUT_FEATURE_SELECTOR_TALL_CAPS = 5, + + /* Selectors for #HB_AAT_LAYOUT_FEATURE_TYPE_CHARACTER_SHAPE */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_TRADITIONAL_CHARACTERS = 0, + HB_AAT_LAYOUT_FEATURE_SELECTOR_SIMPLIFIED_CHARACTERS = 1, + HB_AAT_LAYOUT_FEATURE_SELECTOR_JIS1978_CHARACTERS = 2, + HB_AAT_LAYOUT_FEATURE_SELECTOR_JIS1983_CHARACTERS = 3, + HB_AAT_LAYOUT_FEATURE_SELECTOR_JIS1990_CHARACTERS = 4, + HB_AAT_LAYOUT_FEATURE_SELECTOR_TRADITIONAL_ALT_ONE = 5, + HB_AAT_LAYOUT_FEATURE_SELECTOR_TRADITIONAL_ALT_TWO = 6, + HB_AAT_LAYOUT_FEATURE_SELECTOR_TRADITIONAL_ALT_THREE = 7, + HB_AAT_LAYOUT_FEATURE_SELECTOR_TRADITIONAL_ALT_FOUR = 8, + HB_AAT_LAYOUT_FEATURE_SELECTOR_TRADITIONAL_ALT_FIVE = 9, + HB_AAT_LAYOUT_FEATURE_SELECTOR_EXPERT_CHARACTERS = 10, + HB_AAT_LAYOUT_FEATURE_SELECTOR_JIS2004_CHARACTERS = 11, + HB_AAT_LAYOUT_FEATURE_SELECTOR_HOJO_CHARACTERS = 12, + HB_AAT_LAYOUT_FEATURE_SELECTOR_NLCCHARACTERS = 13, + HB_AAT_LAYOUT_FEATURE_SELECTOR_TRADITIONAL_NAMES_CHARACTERS = 14, + + /* Selectors for #HB_AAT_LAYOUT_FEATURE_TYPE_NUMBER_CASE */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_LOWER_CASE_NUMBERS = 0, + HB_AAT_LAYOUT_FEATURE_SELECTOR_UPPER_CASE_NUMBERS = 1, + + /* Selectors for #HB_AAT_LAYOUT_FEATURE_TYPE_TEXT_SPACING */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_PROPORTIONAL_TEXT = 0, + HB_AAT_LAYOUT_FEATURE_SELECTOR_MONOSPACED_TEXT = 1, + HB_AAT_LAYOUT_FEATURE_SELECTOR_HALF_WIDTH_TEXT = 2, + HB_AAT_LAYOUT_FEATURE_SELECTOR_THIRD_WIDTH_TEXT = 3, + HB_AAT_LAYOUT_FEATURE_SELECTOR_QUARTER_WIDTH_TEXT = 4, + HB_AAT_LAYOUT_FEATURE_SELECTOR_ALT_PROPORTIONAL_TEXT = 5, + HB_AAT_LAYOUT_FEATURE_SELECTOR_ALT_HALF_WIDTH_TEXT = 6, + + /* Selectors for #HB_AAT_LAYOUT_FEATURE_TYPE_TRANSLITERATION */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_NO_TRANSLITERATION = 0, + HB_AAT_LAYOUT_FEATURE_SELECTOR_HANJA_TO_HANGUL = 1, + HB_AAT_LAYOUT_FEATURE_SELECTOR_HIRAGANA_TO_KATAKANA = 2, + HB_AAT_LAYOUT_FEATURE_SELECTOR_KATAKANA_TO_HIRAGANA = 3, + HB_AAT_LAYOUT_FEATURE_SELECTOR_KANA_TO_ROMANIZATION = 4, + HB_AAT_LAYOUT_FEATURE_SELECTOR_ROMANIZATION_TO_HIRAGANA = 5, + HB_AAT_LAYOUT_FEATURE_SELECTOR_ROMANIZATION_TO_KATAKANA = 6, + HB_AAT_LAYOUT_FEATURE_SELECTOR_HANJA_TO_HANGUL_ALT_ONE = 7, + HB_AAT_LAYOUT_FEATURE_SELECTOR_HANJA_TO_HANGUL_ALT_TWO = 8, + HB_AAT_LAYOUT_FEATURE_SELECTOR_HANJA_TO_HANGUL_ALT_THREE = 9, + + /* Selectors for #HB_AAT_LAYOUT_FEATURE_TYPE_ANNOTATION_TYPE */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_NO_ANNOTATION = 0, + HB_AAT_LAYOUT_FEATURE_SELECTOR_BOX_ANNOTATION = 1, + HB_AAT_LAYOUT_FEATURE_SELECTOR_ROUNDED_BOX_ANNOTATION = 2, + HB_AAT_LAYOUT_FEATURE_SELECTOR_CIRCLE_ANNOTATION = 3, + HB_AAT_LAYOUT_FEATURE_SELECTOR_INVERTED_CIRCLE_ANNOTATION = 4, + HB_AAT_LAYOUT_FEATURE_SELECTOR_PARENTHESIS_ANNOTATION = 5, + HB_AAT_LAYOUT_FEATURE_SELECTOR_PERIOD_ANNOTATION = 6, + HB_AAT_LAYOUT_FEATURE_SELECTOR_ROMAN_NUMERAL_ANNOTATION = 7, + HB_AAT_LAYOUT_FEATURE_SELECTOR_DIAMOND_ANNOTATION = 8, + HB_AAT_LAYOUT_FEATURE_SELECTOR_INVERTED_BOX_ANNOTATION = 9, + HB_AAT_LAYOUT_FEATURE_SELECTOR_INVERTED_ROUNDED_BOX_ANNOTATION= 10, + + /* Selectors for #HB_AAT_LAYOUT_FEATURE_TYPE_KANA_SPACING_TYPE */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_FULL_WIDTH_KANA = 0, + HB_AAT_LAYOUT_FEATURE_SELECTOR_PROPORTIONAL_KANA = 1, + + /* Selectors for #HB_AAT_LAYOUT_FEATURE_TYPE_IDEOGRAPHIC_SPACING_TYPE */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_FULL_WIDTH_IDEOGRAPHS = 0, + HB_AAT_LAYOUT_FEATURE_SELECTOR_PROPORTIONAL_IDEOGRAPHS = 1, + HB_AAT_LAYOUT_FEATURE_SELECTOR_HALF_WIDTH_IDEOGRAPHS = 2, + + /* Selectors for #HB_AAT_LAYOUT_FEATURE_TYPE_UNICODE_DECOMPOSITION_TYPE */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_CANONICAL_COMPOSITION_ON = 0, + HB_AAT_LAYOUT_FEATURE_SELECTOR_CANONICAL_COMPOSITION_OFF = 1, + HB_AAT_LAYOUT_FEATURE_SELECTOR_COMPATIBILITY_COMPOSITION_ON = 2, + HB_AAT_LAYOUT_FEATURE_SELECTOR_COMPATIBILITY_COMPOSITION_OFF = 3, + HB_AAT_LAYOUT_FEATURE_SELECTOR_TRANSCODING_COMPOSITION_ON = 4, + HB_AAT_LAYOUT_FEATURE_SELECTOR_TRANSCODING_COMPOSITION_OFF = 5, + + /* Selectors for #HB_AAT_LAYOUT_FEATURE_TYPE_RUBY_KANA */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_NO_RUBY_KANA = 0, /* deprecated - use HB_AAT_LAYOUT_FEATURE_SELECTOR_RUBY_KANA_OFF instead */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_RUBY_KANA = 1, /* deprecated - use HB_AAT_LAYOUT_FEATURE_SELECTOR_RUBY_KANA_ON instead */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_RUBY_KANA_ON = 2, + HB_AAT_LAYOUT_FEATURE_SELECTOR_RUBY_KANA_OFF = 3, + + /* Selectors for #HB_AAT_LAYOUT_FEATURE_TYPE_CJK_SYMBOL_ALTERNATIVES_TYPE */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_NO_CJK_SYMBOL_ALTERNATIVES = 0, + HB_AAT_LAYOUT_FEATURE_SELECTOR_CJK_SYMBOL_ALT_ONE = 1, + HB_AAT_LAYOUT_FEATURE_SELECTOR_CJK_SYMBOL_ALT_TWO = 2, + HB_AAT_LAYOUT_FEATURE_SELECTOR_CJK_SYMBOL_ALT_THREE = 3, + HB_AAT_LAYOUT_FEATURE_SELECTOR_CJK_SYMBOL_ALT_FOUR = 4, + HB_AAT_LAYOUT_FEATURE_SELECTOR_CJK_SYMBOL_ALT_FIVE = 5, + + /* Selectors for #HB_AAT_LAYOUT_FEATURE_TYPE_IDEOGRAPHIC_ALTERNATIVES_TYPE */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_NO_IDEOGRAPHIC_ALTERNATIVES = 0, + HB_AAT_LAYOUT_FEATURE_SELECTOR_IDEOGRAPHIC_ALT_ONE = 1, + HB_AAT_LAYOUT_FEATURE_SELECTOR_IDEOGRAPHIC_ALT_TWO = 2, + HB_AAT_LAYOUT_FEATURE_SELECTOR_IDEOGRAPHIC_ALT_THREE = 3, + HB_AAT_LAYOUT_FEATURE_SELECTOR_IDEOGRAPHIC_ALT_FOUR = 4, + HB_AAT_LAYOUT_FEATURE_SELECTOR_IDEOGRAPHIC_ALT_FIVE = 5, + + /* Selectors for #HB_AAT_LAYOUT_FEATURE_TYPE_CJK_VERTICAL_ROMAN_PLACEMENT_TYPE */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_CJK_VERTICAL_ROMAN_CENTERED = 0, + HB_AAT_LAYOUT_FEATURE_SELECTOR_CJK_VERTICAL_ROMAN_HBASELINE = 1, + + /* Selectors for #HB_AAT_LAYOUT_FEATURE_TYPE_ITALIC_CJK_ROMAN */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_NO_CJK_ITALIC_ROMAN = 0, /* deprecated - use HB_AAT_LAYOUT_FEATURE_SELECTOR_CJK_ITALIC_ROMAN_OFF instead */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_CJK_ITALIC_ROMAN = 1, /* deprecated - use HB_AAT_LAYOUT_FEATURE_SELECTOR_CJK_ITALIC_ROMAN_ON instead */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_CJK_ITALIC_ROMAN_ON = 2, + HB_AAT_LAYOUT_FEATURE_SELECTOR_CJK_ITALIC_ROMAN_OFF = 3, + + /* Selectors for #HB_AAT_LAYOUT_FEATURE_TYPE_CASE_SENSITIVE_LAYOUT */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_CASE_SENSITIVE_LAYOUT_ON = 0, + HB_AAT_LAYOUT_FEATURE_SELECTOR_CASE_SENSITIVE_LAYOUT_OFF = 1, + HB_AAT_LAYOUT_FEATURE_SELECTOR_CASE_SENSITIVE_SPACING_ON = 2, + HB_AAT_LAYOUT_FEATURE_SELECTOR_CASE_SENSITIVE_SPACING_OFF = 3, + + /* Selectors for #HB_AAT_LAYOUT_FEATURE_TYPE_ALTERNATE_KANA */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_ALTERNATE_HORIZ_KANA_ON = 0, + HB_AAT_LAYOUT_FEATURE_SELECTOR_ALTERNATE_HORIZ_KANA_OFF = 1, + HB_AAT_LAYOUT_FEATURE_SELECTOR_ALTERNATE_VERT_KANA_ON = 2, + HB_AAT_LAYOUT_FEATURE_SELECTOR_ALTERNATE_VERT_KANA_OFF = 3, + + /* Selectors for #HB_AAT_LAYOUT_FEATURE_TYPE_STYLISTIC_ALTERNATIVES */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_NO_STYLISTIC_ALTERNATES = 0, + HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_ONE_ON = 2, + HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_ONE_OFF = 3, + HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_TWO_ON = 4, + HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_TWO_OFF = 5, + HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_THREE_ON = 6, + HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_THREE_OFF = 7, + HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_FOUR_ON = 8, + HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_FOUR_OFF = 9, + HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_FIVE_ON = 10, + HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_FIVE_OFF = 11, + HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_SIX_ON = 12, + HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_SIX_OFF = 13, + HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_SEVEN_ON = 14, + HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_SEVEN_OFF = 15, + HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_EIGHT_ON = 16, + HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_EIGHT_OFF = 17, + HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_NINE_ON = 18, + HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_NINE_OFF = 19, + HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_TEN_ON = 20, + HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_TEN_OFF = 21, + HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_ELEVEN_ON = 22, + HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_ELEVEN_OFF = 23, + HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_TWELVE_ON = 24, + HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_TWELVE_OFF = 25, + HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_THIRTEEN_ON = 26, + HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_THIRTEEN_OFF = 27, + HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_FOURTEEN_ON = 28, + HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_FOURTEEN_OFF = 29, + HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_FIFTEEN_ON = 30, + HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_FIFTEEN_OFF = 31, + HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_SIXTEEN_ON = 32, + HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_SIXTEEN_OFF = 33, + HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_SEVENTEEN_ON = 34, + HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_SEVENTEEN_OFF = 35, + HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_EIGHTEEN_ON = 36, + HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_EIGHTEEN_OFF = 37, + HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_NINETEEN_ON = 38, + HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_NINETEEN_OFF = 39, + HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_TWENTY_ON = 40, + HB_AAT_LAYOUT_FEATURE_SELECTOR_STYLISTIC_ALT_TWENTY_OFF = 41, + + /* Selectors for #HB_AAT_LAYOUT_FEATURE_TYPE_CONTEXTUAL_ALTERNATIVES */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_CONTEXTUAL_ALTERNATES_ON = 0, + HB_AAT_LAYOUT_FEATURE_SELECTOR_CONTEXTUAL_ALTERNATES_OFF = 1, + HB_AAT_LAYOUT_FEATURE_SELECTOR_SWASH_ALTERNATES_ON = 2, + HB_AAT_LAYOUT_FEATURE_SELECTOR_SWASH_ALTERNATES_OFF = 3, + HB_AAT_LAYOUT_FEATURE_SELECTOR_CONTEXTUAL_SWASH_ALTERNATES_ON = 4, + HB_AAT_LAYOUT_FEATURE_SELECTOR_CONTEXTUAL_SWASH_ALTERNATES_OFF= 5, + + /* Selectors for #HB_AAT_LAYOUT_FEATURE_TYPE_LOWER_CASE */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_DEFAULT_LOWER_CASE = 0, + HB_AAT_LAYOUT_FEATURE_SELECTOR_LOWER_CASE_SMALL_CAPS = 1, + HB_AAT_LAYOUT_FEATURE_SELECTOR_LOWER_CASE_PETITE_CAPS = 2, + + /* Selectors for #HB_AAT_LAYOUT_FEATURE_TYPE_UPPER_CASE */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_DEFAULT_UPPER_CASE = 0, + HB_AAT_LAYOUT_FEATURE_SELECTOR_UPPER_CASE_SMALL_CAPS = 1, + HB_AAT_LAYOUT_FEATURE_SELECTOR_UPPER_CASE_PETITE_CAPS = 2, + + /* Selectors for #HB_AAT_LAYOUT_FEATURE_TYPE_CJK_ROMAN_SPACING_TYPE */ + HB_AAT_LAYOUT_FEATURE_SELECTOR_HALF_WIDTH_CJK_ROMAN = 0, + HB_AAT_LAYOUT_FEATURE_SELECTOR_PROPORTIONAL_CJK_ROMAN = 1, + HB_AAT_LAYOUT_FEATURE_SELECTOR_DEFAULT_CJK_ROMAN = 2, + HB_AAT_LAYOUT_FEATURE_SELECTOR_FULL_WIDTH_CJK_ROMAN = 3, + + /*< private >*/ + _HB_AAT_LAYOUT_FEATURE_SELECTOR_MAX_VALUE = HB_TAG_MAX_SIGNED /*< skip >*/ +} hb_aat_layout_feature_selector_t; + +HB_EXTERN unsigned int +hb_aat_layout_get_feature_types (hb_face_t *face, + unsigned int start_offset, + unsigned int *feature_count, /* IN/OUT. May be NULL. */ + hb_aat_layout_feature_type_t *features /* OUT. May be NULL. */); + +HB_EXTERN hb_ot_name_id_t +hb_aat_layout_feature_type_get_name_id (hb_face_t *face, + hb_aat_layout_feature_type_t feature_type); + +/** + * hb_aat_layout_feature_selector_info_t: + * @name_id: The selector's name identifier + * @enable: The value to turn the selector on + * @disable: The value to turn the selector off + * + * Structure representing a setting for an #hb_aat_layout_feature_type_t. + */ +typedef struct hb_aat_layout_feature_selector_info_t { + hb_ot_name_id_t name_id; + hb_aat_layout_feature_selector_t enable; + hb_aat_layout_feature_selector_t disable; + /*< private >*/ + unsigned int reserved; +} hb_aat_layout_feature_selector_info_t; + +/** + * HB_AAT_LAYOUT_NO_SELECTOR_INDEX + * + * Used when getting or setting AAT feature selectors. Indicates that + * there is no selector index corresponding to the selector of interest. + * + */ +#define HB_AAT_LAYOUT_NO_SELECTOR_INDEX 0xFFFFu + +HB_EXTERN unsigned int +hb_aat_layout_feature_type_get_selector_infos (hb_face_t *face, + hb_aat_layout_feature_type_t feature_type, + unsigned int start_offset, + unsigned int *selector_count, /* IN/OUT. May be NULL. */ + hb_aat_layout_feature_selector_info_t *selectors, /* OUT. May be NULL. */ + unsigned int *default_index /* OUT. May be NULL. */); + + +/* + * morx/mort + */ + +HB_EXTERN hb_bool_t +hb_aat_layout_has_substitution (hb_face_t *face); + + +/* + * kerx + */ + +HB_EXTERN hb_bool_t +hb_aat_layout_has_positioning (hb_face_t *face); + + +/* + * trak + */ + +HB_EXTERN hb_bool_t +hb_aat_layout_has_tracking (hb_face_t *face); + + +HB_END_DECLS + +#endif /* HB_AAT_LAYOUT_H */ diff --git a/dependencies/winx64/include/harfbuzz/hb-aat.h b/dependencies/winx64/include/harfbuzz/hb-aat.h new file mode 100644 index 0000000..c14313d --- /dev/null +++ b/dependencies/winx64/include/harfbuzz/hb-aat.h @@ -0,0 +1,38 @@ +/* + * Copyright © 2018 Ebrahim Byagowi + * + * This is part of HarfBuzz, a text shaping library. + * + * Permission is hereby granted, without written agreement and without + * license or royalty fees, to use, copy, modify, and distribute this + * software and its documentation for any purpose, provided that the + * above copyright notice and the following two paragraphs appear in + * all copies of this software. + * + * IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE TO ANY PARTY FOR + * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES + * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN + * IF THE COPYRIGHT HOLDER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + * THE COPYRIGHT HOLDER SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, + * BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND + * FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS + * ON AN "AS IS" BASIS, AND THE COPYRIGHT HOLDER HAS NO OBLIGATION TO + * PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. + */ + +#ifndef HB_AAT_H +#define HB_AAT_H +#define HB_AAT_H_IN + +#include "hb.h" + +#include "hb-aat-layout.h" + +HB_BEGIN_DECLS + +HB_END_DECLS + +#undef HB_AAT_H_IN +#endif /* HB_AAT_H */ diff --git a/dependencies/winx64/include/harfbuzz/hb-blob.h b/dependencies/winx64/include/harfbuzz/hb-blob.h new file mode 100644 index 0000000..db50067 --- /dev/null +++ b/dependencies/winx64/include/harfbuzz/hb-blob.h @@ -0,0 +1,160 @@ +/* + * Copyright © 2009 Red Hat, Inc. + * + * This is part of HarfBuzz, a text shaping library. + * + * Permission is hereby granted, without written agreement and without + * license or royalty fees, to use, copy, modify, and distribute this + * software and its documentation for any purpose, provided that the + * above copyright notice and the following two paragraphs appear in + * all copies of this software. + * + * IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE TO ANY PARTY FOR + * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES + * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN + * IF THE COPYRIGHT HOLDER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + * THE COPYRIGHT HOLDER SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, + * BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND + * FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS + * ON AN "AS IS" BASIS, AND THE COPYRIGHT HOLDER HAS NO OBLIGATION TO + * PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. + * + * Red Hat Author(s): Behdad Esfahbod + */ + +#if !defined(HB_H_IN) && !defined(HB_NO_SINGLE_HEADER_ERROR) +#error "Include instead." +#endif + +#ifndef HB_BLOB_H +#define HB_BLOB_H + +#include "hb-common.h" + +HB_BEGIN_DECLS + + +/** + * hb_memory_mode_t: + * @HB_MEMORY_MODE_DUPLICATE: HarfBuzz immediately makes a copy of the data. + * @HB_MEMORY_MODE_READONLY: HarfBuzz client will never modify the data, + * and HarfBuzz will never modify the data. + * @HB_MEMORY_MODE_WRITABLE: HarfBuzz client made a copy of the data solely + * for HarfBuzz, so HarfBuzz may modify the data. + * @HB_MEMORY_MODE_READONLY_MAY_MAKE_WRITABLE: See above + * + * Data type holding the memory modes available to + * client programs. + * + * Regarding these various memory-modes: + * + * - In no case shall the HarfBuzz client modify memory + * that is passed to HarfBuzz in a blob. If there is + * any such possibility, @HB_MEMORY_MODE_DUPLICATE should be used + * such that HarfBuzz makes a copy immediately, + * + * - Use @HB_MEMORY_MODE_READONLY otherwise, unless you really really + * really know what you are doing, + * + * - @HB_MEMORY_MODE_WRITABLE is appropriate if you really made a + * copy of data solely for the purpose of passing to + * HarfBuzz and doing that just once (no reuse!), + * + * - If the font is mmap()ed, it's okay to use + * @HB_MEMORY_MODE_READONLY_MAY_MAKE_WRITABLE, however, using that mode + * correctly is very tricky. Use @HB_MEMORY_MODE_READONLY instead. + **/ +typedef enum { + HB_MEMORY_MODE_DUPLICATE, + HB_MEMORY_MODE_READONLY, + HB_MEMORY_MODE_WRITABLE, + HB_MEMORY_MODE_READONLY_MAY_MAKE_WRITABLE +} hb_memory_mode_t; + +/** + * hb_blob_t: + * + * Data type for blobs. A blob wraps a chunk of binary + * data and facilitates its lifecycle management between + * a client program and HarfBuzz. + * + **/ +typedef struct hb_blob_t hb_blob_t; + +HB_EXTERN hb_blob_t * +hb_blob_create (const char *data, + unsigned int length, + hb_memory_mode_t mode, + void *user_data, + hb_destroy_func_t destroy); + +HB_EXTERN hb_blob_t * +hb_blob_create_or_fail (const char *data, + unsigned int length, + hb_memory_mode_t mode, + void *user_data, + hb_destroy_func_t destroy); + +HB_EXTERN hb_blob_t * +hb_blob_create_from_file (const char *file_name); + +HB_EXTERN hb_blob_t * +hb_blob_create_from_file_or_fail (const char *file_name); + +/* Always creates with MEMORY_MODE_READONLY. + * Even if the parent blob is writable, we don't + * want the user of the sub-blob to be able to + * modify the parent data as that data may be + * shared among multiple sub-blobs. + */ +HB_EXTERN hb_blob_t * +hb_blob_create_sub_blob (hb_blob_t *parent, + unsigned int offset, + unsigned int length); + +HB_EXTERN hb_blob_t * +hb_blob_copy_writable_or_fail (hb_blob_t *blob); + +HB_EXTERN hb_blob_t * +hb_blob_get_empty (void); + +HB_EXTERN hb_blob_t * +hb_blob_reference (hb_blob_t *blob); + +HB_EXTERN void +hb_blob_destroy (hb_blob_t *blob); + +HB_EXTERN hb_bool_t +hb_blob_set_user_data (hb_blob_t *blob, + hb_user_data_key_t *key, + void * data, + hb_destroy_func_t destroy, + hb_bool_t replace); + + +HB_EXTERN void * +hb_blob_get_user_data (const hb_blob_t *blob, + hb_user_data_key_t *key); + + +HB_EXTERN void +hb_blob_make_immutable (hb_blob_t *blob); + +HB_EXTERN hb_bool_t +hb_blob_is_immutable (hb_blob_t *blob); + + +HB_EXTERN unsigned int +hb_blob_get_length (hb_blob_t *blob); + +HB_EXTERN const char * +hb_blob_get_data (hb_blob_t *blob, unsigned int *length); + +HB_EXTERN char * +hb_blob_get_data_writable (hb_blob_t *blob, unsigned int *length); + +HB_END_DECLS + +#endif /* HB_BLOB_H */ diff --git a/dependencies/winx64/include/harfbuzz/hb-buffer.h b/dependencies/winx64/include/harfbuzz/hb-buffer.h new file mode 100644 index 0000000..705b767 --- /dev/null +++ b/dependencies/winx64/include/harfbuzz/hb-buffer.h @@ -0,0 +1,871 @@ +/* + * Copyright © 1998-2004 David Turner and Werner Lemberg + * Copyright © 2004,2007,2009 Red Hat, Inc. + * Copyright © 2011,2012 Google, Inc. + * + * This is part of HarfBuzz, a text shaping library. + * + * Permission is hereby granted, without written agreement and without + * license or royalty fees, to use, copy, modify, and distribute this + * software and its documentation for any purpose, provided that the + * above copyright notice and the following two paragraphs appear in + * all copies of this software. + * + * IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE TO ANY PARTY FOR + * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES + * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN + * IF THE COPYRIGHT HOLDER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + * THE COPYRIGHT HOLDER SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, + * BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND + * FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS + * ON AN "AS IS" BASIS, AND THE COPYRIGHT HOLDER HAS NO OBLIGATION TO + * PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. + * + * Red Hat Author(s): Owen Taylor, Behdad Esfahbod + * Google Author(s): Behdad Esfahbod + */ + +#if !defined(HB_H_IN) && !defined(HB_NO_SINGLE_HEADER_ERROR) +#error "Include instead." +#endif + +#ifndef HB_BUFFER_H +#define HB_BUFFER_H + +#include "hb-common.h" +#include "hb-unicode.h" +#include "hb-font.h" + +HB_BEGIN_DECLS + +/** + * hb_glyph_info_t: + * @codepoint: either a Unicode code point (before shaping) or a glyph index + * (after shaping). + * @cluster: the index of the character in the original text that corresponds + * to this #hb_glyph_info_t, or whatever the client passes to + * hb_buffer_add(). More than one #hb_glyph_info_t can have the same + * @cluster value, if they resulted from the same character (e.g. one + * to many glyph substitution), and when more than one character gets + * merged in the same glyph (e.g. many to one glyph substitution) the + * #hb_glyph_info_t will have the smallest cluster value of them. + * By default some characters are merged into the same cluster + * (e.g. combining marks have the same cluster as their bases) + * even if they are separate glyphs, hb_buffer_set_cluster_level() + * allow selecting more fine-grained cluster handling. + * + * The #hb_glyph_info_t is the structure that holds information about the + * glyphs and their relation to input text. + */ +typedef struct hb_glyph_info_t { + hb_codepoint_t codepoint; + /*< private >*/ + hb_mask_t mask; + /*< public >*/ + uint32_t cluster; + + /*< private >*/ + hb_var_int_t var1; + hb_var_int_t var2; +} hb_glyph_info_t; + +/** + * hb_glyph_flags_t: + * @HB_GLYPH_FLAG_UNSAFE_TO_BREAK: Indicates that if input text is broken at the + * beginning of the cluster this glyph is part of, + * then both sides need to be re-shaped, as the + * result might be different. + * On the flip side, it means that when this + * flag is not present, then it is safe to break + * the glyph-run at the beginning of this + * cluster, and the two sides will represent the + * exact same result one would get if breaking + * input text at the beginning of this cluster + * and shaping the two sides separately. + * This can be used to optimize paragraph + * layout, by avoiding re-shaping of each line + * after line-breaking. + * @HB_GLYPH_FLAG_UNSAFE_TO_CONCAT: Indicates that if input text is changed on one + * side of the beginning of the cluster this glyph + * is part of, then the shaping results for the + * other side might change. + * Note that the absence of this flag will NOT by + * itself mean that it IS safe to concat text. + * Only two pieces of text both of which clear of + * this flag can be concatenated safely. + * This can be used to optimize paragraph + * layout, by avoiding re-shaping of each line + * after line-breaking, by limiting the + * reshaping to a small piece around the + * breaking position only, even if the breaking + * position carries the + * #HB_GLYPH_FLAG_UNSAFE_TO_BREAK or when + * hyphenation or other text transformation + * happens at line-break position, in the following + * way: + * 1. Iterate back from the line-break position + * until the first cluster start position that is + * NOT unsafe-to-concat, 2. shape the segment from + * there till the end of line, 3. check whether the + * resulting glyph-run also is clear of the + * unsafe-to-concat at its start-of-text position; + * if it is, just splice it into place and the line + * is shaped; If not, move on to a position further + * back that is clear of unsafe-to-concat and retry + * from there, and repeat. + * At the start of next line a similar algorithm can + * be implemented. That is: 1. Iterate forward from + * the line-break position until the first cluster + * start position that is NOT unsafe-to-concat, 2. + * shape the segment from beginning of the line to + * that position, 3. check whether the resulting + * glyph-run also is clear of the unsafe-to-concat + * at its end-of-text position; if it is, just splice + * it into place and the beginning is shaped; If not, + * move on to a position further forward that is clear + * of unsafe-to-concat and retry up to there, and repeat. + * A slight complication will arise in the + * implementation of the algorithm above, + * because while our buffer API has a way to + * return flags for position corresponding to + * start-of-text, there is currently no position + * corresponding to end-of-text. This limitation + * can be alleviated by shaping more text than needed + * and looking for unsafe-to-concat flag within text + * clusters. + * The #HB_GLYPH_FLAG_UNSAFE_TO_BREAK flag will + * always imply this flag. + * To use this flag, you must enable the buffer flag + * @HB_BUFFER_FLAG_PRODUCE_UNSAFE_TO_CONCAT during + * shaping, otherwise the buffer flag will not be + * reliably produced. + * Since: 4.0.0 + * @HB_GLYPH_FLAG_SAFE_TO_INSERT_TATWEEL: In scripts that use elongation (Arabic, + Mongolian, Syriac, etc.), this flag signifies + that it is safe to insert a U+0640 TATWEEL + character before this cluster for elongation. + This flag does not determine the + script-specific elongation places, but only + when it is safe to do the elongation without + interrupting text shaping. + Since: 5.1.0 + * @HB_GLYPH_FLAG_DEFINED: All the currently defined flags. + * + * Flags for #hb_glyph_info_t. + * + * Since: 1.5.0 + */ +typedef enum { /*< flags >*/ + HB_GLYPH_FLAG_UNSAFE_TO_BREAK = 0x00000001, + HB_GLYPH_FLAG_UNSAFE_TO_CONCAT = 0x00000002, + HB_GLYPH_FLAG_SAFE_TO_INSERT_TATWEEL = 0x00000004, + + HB_GLYPH_FLAG_DEFINED = 0x00000007 /* OR of all defined flags */ +} hb_glyph_flags_t; + +HB_EXTERN hb_glyph_flags_t +hb_glyph_info_get_glyph_flags (const hb_glyph_info_t *info); + +#define hb_glyph_info_get_glyph_flags(info) \ + ((hb_glyph_flags_t) ((unsigned int) (info)->mask & HB_GLYPH_FLAG_DEFINED)) + + +/** + * hb_glyph_position_t: + * @x_advance: how much the line advances after drawing this glyph when setting + * text in horizontal direction. + * @y_advance: how much the line advances after drawing this glyph when setting + * text in vertical direction. + * @x_offset: how much the glyph moves on the X-axis before drawing it, this + * should not affect how much the line advances. + * @y_offset: how much the glyph moves on the Y-axis before drawing it, this + * should not affect how much the line advances. + * + * The #hb_glyph_position_t is the structure that holds the positions of the + * glyph in both horizontal and vertical directions. All positions in + * #hb_glyph_position_t are relative to the current point. + * + */ +typedef struct hb_glyph_position_t { + hb_position_t x_advance; + hb_position_t y_advance; + hb_position_t x_offset; + hb_position_t y_offset; + + /*< private >*/ + hb_var_int_t var; +} hb_glyph_position_t; + +/** + * hb_segment_properties_t: + * @direction: the #hb_direction_t of the buffer, see hb_buffer_set_direction(). + * @script: the #hb_script_t of the buffer, see hb_buffer_set_script(). + * @language: the #hb_language_t of the buffer, see hb_buffer_set_language(). + * + * The structure that holds various text properties of an #hb_buffer_t. Can be + * set and retrieved using hb_buffer_set_segment_properties() and + * hb_buffer_get_segment_properties(), respectively. + */ +typedef struct hb_segment_properties_t { + hb_direction_t direction; + hb_script_t script; + hb_language_t language; + /*< private >*/ + void *reserved1; + void *reserved2; +} hb_segment_properties_t; + +/** + * HB_SEGMENT_PROPERTIES_DEFAULT: + * + * The default #hb_segment_properties_t of of freshly created #hb_buffer_t. + */ +#define HB_SEGMENT_PROPERTIES_DEFAULT {HB_DIRECTION_INVALID, \ + HB_SCRIPT_INVALID, \ + HB_LANGUAGE_INVALID, \ + (void *) 0, \ + (void *) 0} + +HB_EXTERN hb_bool_t +hb_segment_properties_equal (const hb_segment_properties_t *a, + const hb_segment_properties_t *b); + +HB_EXTERN unsigned int +hb_segment_properties_hash (const hb_segment_properties_t *p); + +HB_EXTERN void +hb_segment_properties_overlay (hb_segment_properties_t *p, + const hb_segment_properties_t *src); + + +/** + * hb_buffer_t: + * + * The main structure holding the input text and its properties before shaping, + * and output glyphs and their information after shaping. + */ + +typedef struct hb_buffer_t hb_buffer_t; + +HB_EXTERN hb_buffer_t * +hb_buffer_create (void); + +HB_EXTERN hb_buffer_t * +hb_buffer_create_similar (const hb_buffer_t *src); + +HB_EXTERN void +hb_buffer_reset (hb_buffer_t *buffer); + + +HB_EXTERN hb_buffer_t * +hb_buffer_get_empty (void); + +HB_EXTERN hb_buffer_t * +hb_buffer_reference (hb_buffer_t *buffer); + +HB_EXTERN void +hb_buffer_destroy (hb_buffer_t *buffer); + +HB_EXTERN hb_bool_t +hb_buffer_set_user_data (hb_buffer_t *buffer, + hb_user_data_key_t *key, + void * data, + hb_destroy_func_t destroy, + hb_bool_t replace); + +HB_EXTERN void * +hb_buffer_get_user_data (const hb_buffer_t *buffer, + hb_user_data_key_t *key); + + +/** + * hb_buffer_content_type_t: + * @HB_BUFFER_CONTENT_TYPE_INVALID: Initial value for new buffer. + * @HB_BUFFER_CONTENT_TYPE_UNICODE: The buffer contains input characters (before shaping). + * @HB_BUFFER_CONTENT_TYPE_GLYPHS: The buffer contains output glyphs (after shaping). + * + * The type of #hb_buffer_t contents. + */ +typedef enum { + HB_BUFFER_CONTENT_TYPE_INVALID = 0, + HB_BUFFER_CONTENT_TYPE_UNICODE, + HB_BUFFER_CONTENT_TYPE_GLYPHS +} hb_buffer_content_type_t; + +HB_EXTERN void +hb_buffer_set_content_type (hb_buffer_t *buffer, + hb_buffer_content_type_t content_type); + +HB_EXTERN hb_buffer_content_type_t +hb_buffer_get_content_type (const hb_buffer_t *buffer); + + +HB_EXTERN void +hb_buffer_set_unicode_funcs (hb_buffer_t *buffer, + hb_unicode_funcs_t *unicode_funcs); + +HB_EXTERN hb_unicode_funcs_t * +hb_buffer_get_unicode_funcs (const hb_buffer_t *buffer); + +HB_EXTERN void +hb_buffer_set_direction (hb_buffer_t *buffer, + hb_direction_t direction); + +HB_EXTERN hb_direction_t +hb_buffer_get_direction (const hb_buffer_t *buffer); + +HB_EXTERN void +hb_buffer_set_script (hb_buffer_t *buffer, + hb_script_t script); + +HB_EXTERN hb_script_t +hb_buffer_get_script (const hb_buffer_t *buffer); + +HB_EXTERN void +hb_buffer_set_language (hb_buffer_t *buffer, + hb_language_t language); + + +HB_EXTERN hb_language_t +hb_buffer_get_language (const hb_buffer_t *buffer); + +HB_EXTERN void +hb_buffer_set_segment_properties (hb_buffer_t *buffer, + const hb_segment_properties_t *props); + +HB_EXTERN void +hb_buffer_get_segment_properties (const hb_buffer_t *buffer, + hb_segment_properties_t *props); + +HB_EXTERN void +hb_buffer_guess_segment_properties (hb_buffer_t *buffer); + + +/** + * hb_buffer_flags_t: + * @HB_BUFFER_FLAG_DEFAULT: the default buffer flag. + * @HB_BUFFER_FLAG_BOT: flag indicating that special handling of the beginning + * of text paragraph can be applied to this buffer. Should usually + * be set, unless you are passing to the buffer only part + * of the text without the full context. + * @HB_BUFFER_FLAG_EOT: flag indicating that special handling of the end of text + * paragraph can be applied to this buffer, similar to + * @HB_BUFFER_FLAG_BOT. + * @HB_BUFFER_FLAG_PRESERVE_DEFAULT_IGNORABLES: + * flag indication that character with Default_Ignorable + * Unicode property should use the corresponding glyph + * from the font, instead of hiding them (done by + * replacing them with the space glyph and zeroing the + * advance width.) This flag takes precedence over + * @HB_BUFFER_FLAG_REMOVE_DEFAULT_IGNORABLES. + * @HB_BUFFER_FLAG_REMOVE_DEFAULT_IGNORABLES: + * flag indication that character with Default_Ignorable + * Unicode property should be removed from glyph string + * instead of hiding them (done by replacing them with the + * space glyph and zeroing the advance width.) + * @HB_BUFFER_FLAG_PRESERVE_DEFAULT_IGNORABLES takes + * precedence over this flag. Since: 1.8.0 + * @HB_BUFFER_FLAG_DO_NOT_INSERT_DOTTED_CIRCLE: + * flag indicating that a dotted circle should + * not be inserted in the rendering of incorrect + * character sequences (such at <0905 093E>). Since: 2.4.0 + * @HB_BUFFER_FLAG_VERIFY: + * flag indicating that the hb_shape() call and its variants + * should perform various verification processes on the results + * of the shaping operation on the buffer. If the verification + * fails, then either a buffer message is sent, if a message + * handler is installed on the buffer, or a message is written + * to standard error. In either case, the shaping result might + * be modified to show the failed output. Since: 3.4.0 + * @HB_BUFFER_FLAG_PRODUCE_UNSAFE_TO_CONCAT: + * flag indicating that the @HB_GLYPH_FLAG_UNSAFE_TO_CONCAT + * glyph-flag should be produced by the shaper. By default + * it will not be produced since it incurs a cost. Since: 4.0.0 + * @HB_BUFFER_FLAG_PRODUCE_SAFE_TO_INSERT_TATWEEL: + * flag indicating that the @HB_GLYPH_FLAG_SAFE_TO_INSERT_TATWEEL + * glyph-flag should be produced by the shaper. By default + * it will not be produced. Since: 5.1.0 + * @HB_BUFFER_FLAG_DEFINED: All currently defined flags: Since: 4.4.0 + * + * Flags for #hb_buffer_t. + * + * Since: 0.9.20 + */ +typedef enum { /*< flags >*/ + HB_BUFFER_FLAG_DEFAULT = 0x00000000u, + HB_BUFFER_FLAG_BOT = 0x00000001u, /* Beginning-of-text */ + HB_BUFFER_FLAG_EOT = 0x00000002u, /* End-of-text */ + HB_BUFFER_FLAG_PRESERVE_DEFAULT_IGNORABLES = 0x00000004u, + HB_BUFFER_FLAG_REMOVE_DEFAULT_IGNORABLES = 0x00000008u, + HB_BUFFER_FLAG_DO_NOT_INSERT_DOTTED_CIRCLE = 0x00000010u, + HB_BUFFER_FLAG_VERIFY = 0x00000020u, + HB_BUFFER_FLAG_PRODUCE_UNSAFE_TO_CONCAT = 0x00000040u, + HB_BUFFER_FLAG_PRODUCE_SAFE_TO_INSERT_TATWEEL = 0x00000080u, + + HB_BUFFER_FLAG_DEFINED = 0x000000FFu +} hb_buffer_flags_t; + +HB_EXTERN void +hb_buffer_set_flags (hb_buffer_t *buffer, + hb_buffer_flags_t flags); + +HB_EXTERN hb_buffer_flags_t +hb_buffer_get_flags (const hb_buffer_t *buffer); + +/** + * hb_buffer_cluster_level_t: + * @HB_BUFFER_CLUSTER_LEVEL_MONOTONE_GRAPHEMES: Return cluster values grouped by graphemes into + * monotone order. + * @HB_BUFFER_CLUSTER_LEVEL_MONOTONE_CHARACTERS: Return cluster values grouped into monotone order. + * @HB_BUFFER_CLUSTER_LEVEL_CHARACTERS: Don't group cluster values. + * @HB_BUFFER_CLUSTER_LEVEL_DEFAULT: Default cluster level, + * equal to @HB_BUFFER_CLUSTER_LEVEL_MONOTONE_GRAPHEMES. + * @HB_BUFFER_CLUSTER_LEVEL_GRAPHEMES: Only group clusters, but don't enforce monotone order. + * + * Data type for holding HarfBuzz's clustering behavior options. The cluster level + * dictates one aspect of how HarfBuzz will treat non-base characters + * during shaping. + * + * In @HB_BUFFER_CLUSTER_LEVEL_MONOTONE_GRAPHEMES, non-base + * characters are merged into the cluster of the base character that precedes them. + * There is also cluster merging every time the clusters will otherwise become non-monotone. + * + * In @HB_BUFFER_CLUSTER_LEVEL_MONOTONE_CHARACTERS, non-base characters are initially + * assigned their own cluster values, which are not merged into preceding base + * clusters. This allows HarfBuzz to perform additional operations like reorder + * sequences of adjacent marks. The output is still monotone, but the cluster + * values are more granular. + * + * In @HB_BUFFER_CLUSTER_LEVEL_CHARACTERS, non-base characters are assigned their + * own cluster values, which are not merged into preceding base clusters. Moreover, + * the cluster values are not merged into monotone order. This is the most granular + * cluster level, and it is useful for clients that need to know the exact cluster + * values of each character, but is harder to use for clients, since clusters + * might appear in any order. + * + * In @HB_BUFFER_CLUSTER_LEVEL_GRAPHEMES, non-base characters are merged into the + * cluster of the base character that precedes them. This is similar to the Unicode + * Grapheme Cluster algorithm, but it is not exactly the same. The output is + * not forced to be monotone. This is useful for clients that want to use HarfBuzz + * as a cheap implementation of the Unicode Grapheme Cluster algorithm. + * + * @HB_BUFFER_CLUSTER_LEVEL_MONOTONE_GRAPHEMES is the default, because it maintains + * backward compatibility with older versions of HarfBuzz. New client programs that + * do not need to maintain such backward compatibility are recommended to use + * @HB_BUFFER_CLUSTER_LEVEL_MONOTONE_CHARACTERS instead of the default. + * + * Since: 0.9.42 + */ +typedef enum { + HB_BUFFER_CLUSTER_LEVEL_MONOTONE_GRAPHEMES = 0, + HB_BUFFER_CLUSTER_LEVEL_MONOTONE_CHARACTERS = 1, + HB_BUFFER_CLUSTER_LEVEL_CHARACTERS = 2, + HB_BUFFER_CLUSTER_LEVEL_GRAPHEMES = 3, + HB_BUFFER_CLUSTER_LEVEL_DEFAULT = HB_BUFFER_CLUSTER_LEVEL_MONOTONE_GRAPHEMES +} hb_buffer_cluster_level_t; + +/** + * HB_BUFFER_CLUSTER_LEVEL_IS_MONOTONE: + * @level: #hb_buffer_cluster_level_t to test + * + * Tests whether a cluster level groups cluster values into monotone order. + * Requires that the level be valid. + * + * Since: 11.0.0 + */ +#define HB_BUFFER_CLUSTER_LEVEL_IS_MONOTONE(level) \ + ((bool) ((1u << (unsigned) (level)) & \ + ((1u << HB_BUFFER_CLUSTER_LEVEL_MONOTONE_GRAPHEMES) | \ + (1u << HB_BUFFER_CLUSTER_LEVEL_MONOTONE_CHARACTERS)))) + +/** + * HB_BUFFER_CLUSTER_LEVEL_IS_GRAPHEMES: + * @level: #hb_buffer_cluster_level_t to test + * + * Tests whether a cluster level groups cluster values by graphemes. Requires + * that the level be valid. + * + * Since: 11.0.0 + */ +#define HB_BUFFER_CLUSTER_LEVEL_IS_GRAPHEMES(level) \ + ((bool) ((1u << (unsigned) (level)) & \ + ((1u << HB_BUFFER_CLUSTER_LEVEL_MONOTONE_GRAPHEMES) | \ + (1u << HB_BUFFER_CLUSTER_LEVEL_GRAPHEMES)))) + +/** + * HB_BUFFER_CLUSTER_LEVEL_IS_CHARACTERS + * @level: #hb_buffer_cluster_level_t to test + * + * Tests whether a cluster level does not group cluster values by graphemes. + * Requires that the level be valid. + * + * Since: 11.0.0 + */ +#define HB_BUFFER_CLUSTER_LEVEL_IS_CHARACTERS(level) \ + ((bool) ((1u << (unsigned) (level)) & \ + ((1u << HB_BUFFER_CLUSTER_LEVEL_MONOTONE_CHARCATERS) | \ + (1u << HB_BUFFER_CLUSTER_LEVEL_CHARACTERS)))) + +HB_EXTERN void +hb_buffer_set_cluster_level (hb_buffer_t *buffer, + hb_buffer_cluster_level_t cluster_level); + +HB_EXTERN hb_buffer_cluster_level_t +hb_buffer_get_cluster_level (const hb_buffer_t *buffer); + +/** + * HB_BUFFER_REPLACEMENT_CODEPOINT_DEFAULT: + * + * The default code point for replacing invalid characters in a given encoding. + * Set to U+FFFD REPLACEMENT CHARACTER. + * + * Since: 0.9.31 + */ +#define HB_BUFFER_REPLACEMENT_CODEPOINT_DEFAULT 0xFFFDu + +HB_EXTERN void +hb_buffer_set_replacement_codepoint (hb_buffer_t *buffer, + hb_codepoint_t replacement); + +HB_EXTERN hb_codepoint_t +hb_buffer_get_replacement_codepoint (const hb_buffer_t *buffer); + +HB_EXTERN void +hb_buffer_set_invisible_glyph (hb_buffer_t *buffer, + hb_codepoint_t invisible); + +HB_EXTERN hb_codepoint_t +hb_buffer_get_invisible_glyph (const hb_buffer_t *buffer); + +HB_EXTERN void +hb_buffer_set_not_found_glyph (hb_buffer_t *buffer, + hb_codepoint_t not_found); + +HB_EXTERN hb_codepoint_t +hb_buffer_get_not_found_glyph (const hb_buffer_t *buffer); + +HB_EXTERN void +hb_buffer_set_not_found_variation_selector_glyph (hb_buffer_t *buffer, + hb_codepoint_t not_found_variation_selector); + +HB_EXTERN hb_codepoint_t +hb_buffer_get_not_found_variation_selector_glyph (const hb_buffer_t *buffer); + +HB_EXTERN void +hb_buffer_set_random_state (hb_buffer_t *buffer, + unsigned state); + +HB_EXTERN unsigned +hb_buffer_get_random_state (const hb_buffer_t *buffer); + +/* + * Content API. + */ + +HB_EXTERN void +hb_buffer_clear_contents (hb_buffer_t *buffer); + +HB_EXTERN hb_bool_t +hb_buffer_pre_allocate (hb_buffer_t *buffer, + unsigned int size); + + +HB_EXTERN hb_bool_t +hb_buffer_allocation_successful (hb_buffer_t *buffer); + +HB_EXTERN void +hb_buffer_reverse (hb_buffer_t *buffer); + +HB_EXTERN void +hb_buffer_reverse_range (hb_buffer_t *buffer, + unsigned int start, unsigned int end); + +HB_EXTERN void +hb_buffer_reverse_clusters (hb_buffer_t *buffer); + + +/* Filling the buffer in */ + +HB_EXTERN void +hb_buffer_add (hb_buffer_t *buffer, + hb_codepoint_t codepoint, + unsigned int cluster); + +HB_EXTERN void +hb_buffer_add_utf8 (hb_buffer_t *buffer, + const char *text, + int text_length, + unsigned int item_offset, + int item_length); + +HB_EXTERN void +hb_buffer_add_utf16 (hb_buffer_t *buffer, + const uint16_t *text, + int text_length, + unsigned int item_offset, + int item_length); + +HB_EXTERN void +hb_buffer_add_utf32 (hb_buffer_t *buffer, + const uint32_t *text, + int text_length, + unsigned int item_offset, + int item_length); + +HB_EXTERN void +hb_buffer_add_latin1 (hb_buffer_t *buffer, + const uint8_t *text, + int text_length, + unsigned int item_offset, + int item_length); + +HB_EXTERN void +hb_buffer_add_codepoints (hb_buffer_t *buffer, + const hb_codepoint_t *text, + int text_length, + unsigned int item_offset, + int item_length); + +HB_EXTERN void +hb_buffer_append (hb_buffer_t *buffer, + const hb_buffer_t *source, + unsigned int start, + unsigned int end); + +HB_EXTERN hb_bool_t +hb_buffer_set_length (hb_buffer_t *buffer, + unsigned int length); + +HB_EXTERN unsigned int +hb_buffer_get_length (const hb_buffer_t *buffer); + +/* Getting glyphs out of the buffer */ + +HB_EXTERN hb_glyph_info_t * +hb_buffer_get_glyph_infos (hb_buffer_t *buffer, + unsigned int *length); + +HB_EXTERN hb_glyph_position_t * +hb_buffer_get_glyph_positions (hb_buffer_t *buffer, + unsigned int *length); + +HB_EXTERN hb_bool_t +hb_buffer_has_positions (hb_buffer_t *buffer); + + +HB_EXTERN void +hb_buffer_normalize_glyphs (hb_buffer_t *buffer); + + +/* + * Serialize + */ + +/** + * hb_buffer_serialize_flags_t: + * @HB_BUFFER_SERIALIZE_FLAG_DEFAULT: serialize glyph names, clusters and positions. + * @HB_BUFFER_SERIALIZE_FLAG_NO_CLUSTERS: do not serialize glyph cluster. + * @HB_BUFFER_SERIALIZE_FLAG_NO_POSITIONS: do not serialize glyph position information. + * @HB_BUFFER_SERIALIZE_FLAG_NO_GLYPH_NAMES: do no serialize glyph name. + * @HB_BUFFER_SERIALIZE_FLAG_GLYPH_EXTENTS: serialize glyph extents. + * @HB_BUFFER_SERIALIZE_FLAG_GLYPH_FLAGS: serialize glyph flags. Since: 1.5.0 + * @HB_BUFFER_SERIALIZE_FLAG_NO_ADVANCES: do not serialize glyph advances, + * glyph offsets will reflect absolute glyph positions. Since: 1.8.0 + * @HB_BUFFER_SERIALIZE_FLAG_DEFINED: All currently defined flags. Since: 4.4.0 + * + * Flags that control what glyph information are serialized in hb_buffer_serialize_glyphs(). + * + * Since: 0.9.20 + */ +typedef enum { /*< flags >*/ + HB_BUFFER_SERIALIZE_FLAG_DEFAULT = 0x00000000u, + HB_BUFFER_SERIALIZE_FLAG_NO_CLUSTERS = 0x00000001u, + HB_BUFFER_SERIALIZE_FLAG_NO_POSITIONS = 0x00000002u, + HB_BUFFER_SERIALIZE_FLAG_NO_GLYPH_NAMES = 0x00000004u, + HB_BUFFER_SERIALIZE_FLAG_GLYPH_EXTENTS = 0x00000008u, + HB_BUFFER_SERIALIZE_FLAG_GLYPH_FLAGS = 0x00000010u, + HB_BUFFER_SERIALIZE_FLAG_NO_ADVANCES = 0x00000020u, + + HB_BUFFER_SERIALIZE_FLAG_DEFINED = 0x0000003Fu +} hb_buffer_serialize_flags_t; + +/** + * hb_buffer_serialize_format_t: + * @HB_BUFFER_SERIALIZE_FORMAT_TEXT: a human-readable, plain text format. + * @HB_BUFFER_SERIALIZE_FORMAT_JSON: a machine-readable JSON format. + * @HB_BUFFER_SERIALIZE_FORMAT_INVALID: invalid format. + * + * The buffer serialization and de-serialization format used in + * hb_buffer_serialize_glyphs() and hb_buffer_deserialize_glyphs(). + * + * Since: 0.9.2 + */ +typedef enum { + HB_BUFFER_SERIALIZE_FORMAT_TEXT = HB_TAG('T','E','X','T'), + HB_BUFFER_SERIALIZE_FORMAT_JSON = HB_TAG('J','S','O','N'), + HB_BUFFER_SERIALIZE_FORMAT_INVALID = HB_TAG_NONE +} hb_buffer_serialize_format_t; + +HB_EXTERN hb_buffer_serialize_format_t +hb_buffer_serialize_format_from_string (const char *str, int len); + +HB_EXTERN const char * +hb_buffer_serialize_format_to_string (hb_buffer_serialize_format_t format); + +HB_EXTERN const char ** +hb_buffer_serialize_list_formats (void); + +HB_EXTERN unsigned int +hb_buffer_serialize_glyphs (hb_buffer_t *buffer, + unsigned int start, + unsigned int end, + char *buf, + unsigned int buf_size, + unsigned int *buf_consumed, + hb_font_t *font, + hb_buffer_serialize_format_t format, + hb_buffer_serialize_flags_t flags); + +HB_EXTERN unsigned int +hb_buffer_serialize_unicode (hb_buffer_t *buffer, + unsigned int start, + unsigned int end, + char *buf, + unsigned int buf_size, + unsigned int *buf_consumed, + hb_buffer_serialize_format_t format, + hb_buffer_serialize_flags_t flags); + +HB_EXTERN unsigned int +hb_buffer_serialize (hb_buffer_t *buffer, + unsigned int start, + unsigned int end, + char *buf, + unsigned int buf_size, + unsigned int *buf_consumed, + hb_font_t *font, + hb_buffer_serialize_format_t format, + hb_buffer_serialize_flags_t flags); + +HB_EXTERN hb_bool_t +hb_buffer_deserialize_glyphs (hb_buffer_t *buffer, + const char *buf, + int buf_len, + const char **end_ptr, + hb_font_t *font, + hb_buffer_serialize_format_t format); + +HB_EXTERN hb_bool_t +hb_buffer_deserialize_unicode (hb_buffer_t *buffer, + const char *buf, + int buf_len, + const char **end_ptr, + hb_buffer_serialize_format_t format); + + + +/* + * Compare buffers + */ + +/** + * hb_buffer_diff_flags_t: + * @HB_BUFFER_DIFF_FLAG_EQUAL: equal buffers. + * @HB_BUFFER_DIFF_FLAG_CONTENT_TYPE_MISMATCH: buffers with different + * #hb_buffer_content_type_t. + * @HB_BUFFER_DIFF_FLAG_LENGTH_MISMATCH: buffers with differing length. + * @HB_BUFFER_DIFF_FLAG_NOTDEF_PRESENT: `.notdef` glyph is present in the + * reference buffer. + * @HB_BUFFER_DIFF_FLAG_DOTTED_CIRCLE_PRESENT: dotted circle glyph is present + * in the reference buffer. + * @HB_BUFFER_DIFF_FLAG_CODEPOINT_MISMATCH: difference in #hb_glyph_info_t.codepoint + * @HB_BUFFER_DIFF_FLAG_CLUSTER_MISMATCH: difference in #hb_glyph_info_t.cluster + * @HB_BUFFER_DIFF_FLAG_GLYPH_FLAGS_MISMATCH: difference in #hb_glyph_flags_t. + * @HB_BUFFER_DIFF_FLAG_POSITION_MISMATCH: difference in #hb_glyph_position_t. + * + * Flags from comparing two #hb_buffer_t's. + * + * Buffer with different #hb_buffer_content_type_t cannot be meaningfully + * compared in any further detail. + * + * For buffers with differing length, the per-glyph comparison is not + * attempted, though we do still scan reference buffer for dotted circle and + * `.notdef` glyphs. + * + * If the buffers have the same length, we compare them glyph-by-glyph and + * report which aspect(s) of the glyph info/position are different. + * + * Since: 1.5.0 + */ +typedef enum { /*< flags >*/ + HB_BUFFER_DIFF_FLAG_EQUAL = 0x0000, + + /* Buffers with different content_type cannot be meaningfully compared + * in any further detail. */ + HB_BUFFER_DIFF_FLAG_CONTENT_TYPE_MISMATCH = 0x0001, + + /* For buffers with differing length, the per-glyph comparison is not + * attempted, though we do still scan reference for dottedcircle / .notdef + * glyphs. */ + HB_BUFFER_DIFF_FLAG_LENGTH_MISMATCH = 0x0002, + + /* We want to know if dottedcircle / .notdef glyphs are present in the + * reference, as we may not care so much about other differences in this + * case. */ + HB_BUFFER_DIFF_FLAG_NOTDEF_PRESENT = 0x0004, + HB_BUFFER_DIFF_FLAG_DOTTED_CIRCLE_PRESENT = 0x0008, + + /* If the buffers have the same length, we compare them glyph-by-glyph + * and report which aspect(s) of the glyph info/position are different. */ + HB_BUFFER_DIFF_FLAG_CODEPOINT_MISMATCH = 0x0010, + HB_BUFFER_DIFF_FLAG_CLUSTER_MISMATCH = 0x0020, + HB_BUFFER_DIFF_FLAG_GLYPH_FLAGS_MISMATCH = 0x0040, + HB_BUFFER_DIFF_FLAG_POSITION_MISMATCH = 0x0080 + +} hb_buffer_diff_flags_t; + +/* Compare the contents of two buffers, report types of differences. */ +HB_EXTERN hb_buffer_diff_flags_t +hb_buffer_diff (hb_buffer_t *buffer, + hb_buffer_t *reference, + hb_codepoint_t dottedcircle_glyph, + unsigned int position_fuzz); + + +/* + * Tracing. + */ + +/** + * hb_buffer_message_func_t: + * @buffer: An #hb_buffer_t to work upon + * @font: The #hb_font_t the @buffer is shaped with + * @message: `NULL`-terminated message passed to the function + * @user_data: User data pointer passed by the caller + * + * A callback method for #hb_buffer_t. The method gets called with the + * #hb_buffer_t it was set on, the #hb_font_t the buffer is shaped with and a + * message describing what step of the shaping process will be performed. + * Returning `false` from this method will skip this shaping step and move to + * the next one. + * + * Return value: `true` to perform the shaping step, `false` to skip it. + * + * Since: 1.1.3 + */ +typedef hb_bool_t (*hb_buffer_message_func_t) (hb_buffer_t *buffer, + hb_font_t *font, + const char *message, + void *user_data); + +HB_EXTERN void +hb_buffer_set_message_func (hb_buffer_t *buffer, + hb_buffer_message_func_t func, + void *user_data, hb_destroy_func_t destroy); + + +HB_END_DECLS + +#endif /* HB_BUFFER_H */ diff --git a/dependencies/winx64/include/harfbuzz/hb-common.h b/dependencies/winx64/include/harfbuzz/hb-common.h new file mode 100644 index 0000000..49d4294 --- /dev/null +++ b/dependencies/winx64/include/harfbuzz/hb-common.h @@ -0,0 +1,534 @@ +/* + * Copyright © 2007,2008,2009 Red Hat, Inc. + * Copyright © 2011,2012 Google, Inc. + * + * This is part of HarfBuzz, a text shaping library. + * + * Permission is hereby granted, without written agreement and without + * license or royalty fees, to use, copy, modify, and distribute this + * software and its documentation for any purpose, provided that the + * above copyright notice and the following two paragraphs appear in + * all copies of this software. + * + * IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE TO ANY PARTY FOR + * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES + * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN + * IF THE COPYRIGHT HOLDER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + * THE COPYRIGHT HOLDER SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, + * BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND + * FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS + * ON AN "AS IS" BASIS, AND THE COPYRIGHT HOLDER HAS NO OBLIGATION TO + * PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. + * + * Red Hat Author(s): Behdad Esfahbod + * Google Author(s): Behdad Esfahbod + */ + +#if !defined(HB_H_IN) && !defined(HB_NO_SINGLE_HEADER_ERROR) +#error "Include instead." +#endif + +#ifndef HB_COMMON_H +#define HB_COMMON_H + +#ifndef HB_EXTERN +#define HB_EXTERN extern +#endif + +#ifndef HB_BEGIN_DECLS +# ifdef __cplusplus +# define HB_BEGIN_DECLS extern "C" { +# define HB_END_DECLS } +# else /* !__cplusplus */ +# define HB_BEGIN_DECLS +# define HB_END_DECLS +# endif /* !__cplusplus */ +#endif + +#if defined (_AIX) +# include +#elif defined (_MSC_VER) && _MSC_VER < 1600 +/* VS 2010 (_MSC_VER 1600) has stdint.h */ +typedef __int8 int8_t; +typedef unsigned __int8 uint8_t; +typedef __int16 int16_t; +typedef unsigned __int16 uint16_t; +typedef __int32 int32_t; +typedef unsigned __int32 uint32_t; +typedef __int64 int64_t; +typedef unsigned __int64 uint64_t; +#elif defined (_MSC_VER) && _MSC_VER < 1800 +/* VS 2013 (_MSC_VER 1800) has inttypes.h */ +# include +#else +# include +#endif +#include + +#if defined(__GNUC__) && ((__GNUC__ > 3) || (__GNUC__ == 3 && __GNUC_MINOR__ >= 1)) +#define HB_DEPRECATED __attribute__((__deprecated__)) +#elif defined(_MSC_VER) && (_MSC_VER >= 1300) +#define HB_DEPRECATED __declspec(deprecated) +#else +#define HB_DEPRECATED +#endif + +#if defined(__GNUC__) && ((__GNUC__ > 4) || (__GNUC__ == 4 && __GNUC_MINOR__ >= 5)) +#define HB_DEPRECATED_FOR(f) __attribute__((__deprecated__("Use '" #f "' instead"))) +#elif defined(_MSC_FULL_VER) && (_MSC_FULL_VER > 140050320) +#define HB_DEPRECATED_FOR(f) __declspec(deprecated("is deprecated. Use '" #f "' instead")) +#else +#define HB_DEPRECATED_FOR(f) HB_DEPRECATED +#endif + + +HB_BEGIN_DECLS + +/** + * hb_bool_t: + * + * Data type for booleans. + * + **/ +typedef int hb_bool_t; + +/** + * hb_codepoint_t: + * + * Data type for holding Unicode codepoints. Also + * used to hold glyph IDs. + * + **/ +typedef uint32_t hb_codepoint_t; + +/** + * HB_CODEPOINT_INVALID: + * + * Unused #hb_codepoint_t value. + * + * Since: 8.0.0 + */ +#define HB_CODEPOINT_INVALID ((hb_codepoint_t) -1) + +/** + * hb_position_t: + * + * Data type for holding a single coordinate value. + * Contour points and other multi-dimensional data are + * stored as tuples of #hb_position_t's. + * + **/ +typedef int32_t hb_position_t; +/** + * hb_mask_t: + * + * Data type for bitmasks. + * + **/ +typedef uint32_t hb_mask_t; + +typedef union _hb_var_int_t { + uint32_t u32; + int32_t i32; + uint16_t u16[2]; + int16_t i16[2]; + uint8_t u8[4]; + int8_t i8[4]; +} hb_var_int_t; + +typedef union _hb_var_num_t { + float f; + uint32_t u32; + int32_t i32; + uint16_t u16[2]; + int16_t i16[2]; + uint8_t u8[4]; + int8_t i8[4]; +} hb_var_num_t; + + +/* hb_tag_t */ + +/** + * hb_tag_t: + * + * Data type for tag identifiers. Tags are four + * byte integers, each byte representing a character. + * + * Tags are used to identify tables, design-variation axes, + * scripts, languages, font features, and baselines with + * human-readable names. + * + **/ +typedef uint32_t hb_tag_t; + +/** + * HB_TAG: + * @c1: 1st character of the tag + * @c2: 2nd character of the tag + * @c3: 3rd character of the tag + * @c4: 4th character of the tag + * + * Constructs an #hb_tag_t from four character literals. + * + **/ +#define HB_TAG(c1,c2,c3,c4) ((hb_tag_t)((((uint32_t)(c1)&0xFF)<<24)|(((uint32_t)(c2)&0xFF)<<16)|(((uint32_t)(c3)&0xFF)<<8)|((uint32_t)(c4)&0xFF))) + +/** + * HB_UNTAG: + * @tag: an #hb_tag_t + * + * Extracts four character literals from an #hb_tag_t. + * + * Since: 0.6.0 + * + **/ +#define HB_UNTAG(tag) (uint8_t)(((tag)>>24)&0xFF), (uint8_t)(((tag)>>16)&0xFF), (uint8_t)(((tag)>>8)&0xFF), (uint8_t)((tag)&0xFF) + +/** + * HB_TAG_NONE: + * + * Unset #hb_tag_t. + */ +#define HB_TAG_NONE HB_TAG(0,0,0,0) +/** + * HB_TAG_MAX: + * + * Maximum possible unsigned #hb_tag_t. + * + * Since: 0.9.26 + */ +#define HB_TAG_MAX HB_TAG(0xff,0xff,0xff,0xff) +/** + * HB_TAG_MAX_SIGNED: + * + * Maximum possible signed #hb_tag_t. + * + * Since: 0.9.33 + */ +#define HB_TAG_MAX_SIGNED HB_TAG(0x7f,0xff,0xff,0xff) + +/* len=-1 means str is NUL-terminated. */ +HB_EXTERN hb_tag_t +hb_tag_from_string (const char *str, int len); + +/* buf should have 4 bytes. */ +HB_EXTERN void +hb_tag_to_string (hb_tag_t tag, char *buf); + + +/** + * hb_direction_t: + * @HB_DIRECTION_INVALID: Initial, unset direction. + * @HB_DIRECTION_LTR: Text is set horizontally from left to right. + * @HB_DIRECTION_RTL: Text is set horizontally from right to left. + * @HB_DIRECTION_TTB: Text is set vertically from top to bottom. + * @HB_DIRECTION_BTT: Text is set vertically from bottom to top. + * + * The direction of a text segment or buffer. + * + * A segment can also be tested for horizontal or vertical + * orientation (irrespective of specific direction) with + * HB_DIRECTION_IS_HORIZONTAL() or HB_DIRECTION_IS_VERTICAL(). + * + */ +typedef enum { + HB_DIRECTION_INVALID = 0, + HB_DIRECTION_LTR = 4, + HB_DIRECTION_RTL, + HB_DIRECTION_TTB, + HB_DIRECTION_BTT +} hb_direction_t; + +/* len=-1 means str is NUL-terminated */ +HB_EXTERN hb_direction_t +hb_direction_from_string (const char *str, int len); + +HB_EXTERN const char * +hb_direction_to_string (hb_direction_t direction); + +/** + * HB_DIRECTION_IS_VALID: + * @dir: #hb_direction_t to test + * + * Tests whether a text direction is valid. + * + **/ +#define HB_DIRECTION_IS_VALID(dir) ((((unsigned int) (dir)) & ~3U) == 4) +/* Direction must be valid for the following */ +/** + * HB_DIRECTION_IS_HORIZONTAL: + * @dir: #hb_direction_t to test + * + * Tests whether a text direction is horizontal. Requires + * that the direction be valid. + * + **/ +#define HB_DIRECTION_IS_HORIZONTAL(dir) ((((unsigned int) (dir)) & ~1U) == 4) +/** + * HB_DIRECTION_IS_VERTICAL: + * @dir: #hb_direction_t to test + * + * Tests whether a text direction is vertical. Requires + * that the direction be valid. + * + **/ +#define HB_DIRECTION_IS_VERTICAL(dir) ((((unsigned int) (dir)) & ~1U) == 6) +/** + * HB_DIRECTION_IS_FORWARD: + * @dir: #hb_direction_t to test + * + * Tests whether a text direction moves forward (from left to right, or from + * top to bottom). Requires that the direction be valid. + * + **/ +#define HB_DIRECTION_IS_FORWARD(dir) ((((unsigned int) (dir)) & ~2U) == 4) +/** + * HB_DIRECTION_IS_BACKWARD: + * @dir: #hb_direction_t to test + * + * Tests whether a text direction moves backward (from right to left, or from + * bottom to top). Requires that the direction be valid. + * + **/ +#define HB_DIRECTION_IS_BACKWARD(dir) ((((unsigned int) (dir)) & ~2U) == 5) +/** + * HB_DIRECTION_REVERSE: + * @dir: #hb_direction_t to reverse + * + * Reverses a text direction. Requires that the direction + * be valid. + * + **/ +#define HB_DIRECTION_REVERSE(dir) ((hb_direction_t) (((unsigned int) (dir)) ^ 1)) + + +/* hb_language_t */ + +/** + * hb_language_t: + * + * Data type for languages. Each #hb_language_t corresponds to a BCP 47 + * language tag. + * + */ +typedef const struct hb_language_impl_t *hb_language_t; + +HB_EXTERN hb_language_t +hb_language_from_string (const char *str, int len); + +HB_EXTERN const char * +hb_language_to_string (hb_language_t language); + +/** + * HB_LANGUAGE_INVALID: + * + * An unset #hb_language_t. + * + * Since: 0.6.0 + */ +#define HB_LANGUAGE_INVALID ((hb_language_t) 0) + +HB_EXTERN hb_language_t +hb_language_get_default (void); + +HB_EXTERN hb_bool_t +hb_language_matches (hb_language_t language, + hb_language_t specific); + +#include "hb-script-list.h" + +/* Script functions */ + +HB_EXTERN hb_script_t +hb_script_from_iso15924_tag (hb_tag_t tag); + +HB_EXTERN hb_script_t +hb_script_from_string (const char *str, int len); + +HB_EXTERN hb_tag_t +hb_script_to_iso15924_tag (hb_script_t script); + +HB_EXTERN hb_direction_t +hb_script_get_horizontal_direction (hb_script_t script); + + +/* User data */ + +/** + * hb_user_data_key_t: + * + * Data structure for holding user-data keys. + * + **/ +typedef struct hb_user_data_key_t { + /*< private >*/ + char unused; +} hb_user_data_key_t; + +/** + * hb_destroy_func_t: + * @user_data: the data to be destroyed + * + * A virtual method for destroy user-data callbacks. + * + */ +typedef void (*hb_destroy_func_t) (void *user_data); + + +/* Font features and variations. */ + +/** + * HB_FEATURE_GLOBAL_START: + * + * Special setting for #hb_feature_t.start to apply the feature from the start + * of the buffer. + * + * Since: 2.0.0 + */ +#define HB_FEATURE_GLOBAL_START 0 + +/** + * HB_FEATURE_GLOBAL_END: + * + * Special setting for #hb_feature_t.end to apply the feature from to the end + * of the buffer. + * + * Since: 2.0.0 + */ +#define HB_FEATURE_GLOBAL_END ((unsigned int) -1) + +/** + * hb_feature_t: + * @tag: The #hb_tag_t tag of the feature + * @value: The value of the feature. 0 disables the feature, non-zero (usually + * 1) enables the feature. For features implemented as lookup type 3 (like + * 'salt') the @value is a one based index into the alternates. + * @start: the cluster to start applying this feature setting (inclusive). + * @end: the cluster to end applying this feature setting (exclusive). + * + * The #hb_feature_t is the structure that holds information about requested + * feature application. The feature will be applied with the given value to all + * glyphs which are in clusters between @start (inclusive) and @end (exclusive). + * Setting start to #HB_FEATURE_GLOBAL_START and end to #HB_FEATURE_GLOBAL_END + * specifies that the feature always applies to the entire buffer. + */ +typedef struct hb_feature_t { + hb_tag_t tag; + uint32_t value; + unsigned int start; + unsigned int end; +} hb_feature_t; + +HB_EXTERN hb_bool_t +hb_feature_from_string (const char *str, int len, + hb_feature_t *feature); + +HB_EXTERN void +hb_feature_to_string (hb_feature_t *feature, + char *buf, unsigned int size); + +/** + * hb_variation_t: + * @tag: The #hb_tag_t tag of the variation-axis name + * @value: The value of the variation axis + * + * Data type for holding variation data. Registered OpenType + * variation-axis tags are listed in + * [OpenType Axis Tag Registry](https://docs.microsoft.com/en-us/typography/opentype/spec/dvaraxisreg). + * + * Since: 1.4.2 + */ +typedef struct hb_variation_t { + hb_tag_t tag; + float value; +} hb_variation_t; + +HB_EXTERN hb_bool_t +hb_variation_from_string (const char *str, int len, + hb_variation_t *variation); + +HB_EXTERN void +hb_variation_to_string (hb_variation_t *variation, + char *buf, unsigned int size); + +/** + * hb_color_t: + * + * Data type for holding color values. Colors are eight bits per + * channel RGB plus alpha transparency. + * + * Since: 2.1.0 + */ +typedef uint32_t hb_color_t; + +/** + * HB_COLOR: + * @b: blue channel value + * @g: green channel value + * @r: red channel value + * @a: alpha channel value + * + * Constructs an #hb_color_t from four integers. + * + * Since: 2.1.0 + */ +#define HB_COLOR(b,g,r,a) ((hb_color_t) HB_TAG ((b),(g),(r),(a))) + +HB_EXTERN uint8_t +hb_color_get_alpha (hb_color_t color); +#define hb_color_get_alpha(color) ((color) & 0xFF) + +HB_EXTERN uint8_t +hb_color_get_red (hb_color_t color); +#define hb_color_get_red(color) (((color) >> 8) & 0xFF) + +HB_EXTERN uint8_t +hb_color_get_green (hb_color_t color); +#define hb_color_get_green(color) (((color) >> 16) & 0xFF) + +HB_EXTERN uint8_t +hb_color_get_blue (hb_color_t color); +#define hb_color_get_blue(color) (((color) >> 24) & 0xFF) + +/** + * hb_glyph_extents_t: + * @x_bearing: Distance from the x-origin to the left extremum of the glyph. + * @y_bearing: Distance from the top extremum of the glyph to the y-origin. + * @width: Distance from the left extremum of the glyph to the right extremum. + * @height: Distance from the top extremum of the glyph to the bottom extremum. + * + * Glyph extent values, measured in font units. + * + * Note that @height is negative, in coordinate systems that grow up. + **/ +typedef struct hb_glyph_extents_t { + hb_position_t x_bearing; + hb_position_t y_bearing; + hb_position_t width; + hb_position_t height; +} hb_glyph_extents_t; + +/** + * hb_font_t: + * + * Data type for holding fonts. + * + */ +typedef struct hb_font_t hb_font_t; + +/* Not of much use to clients. */ +HB_EXTERN void* +hb_malloc (size_t size); +HB_EXTERN void* +hb_calloc (size_t nmemb, size_t size); +HB_EXTERN void* +hb_realloc (void *ptr, size_t size); +HB_EXTERN void +hb_free (void *ptr); + +HB_END_DECLS + +#endif /* HB_COMMON_H */ diff --git a/dependencies/winx64/include/harfbuzz/hb-cplusplus.hh b/dependencies/winx64/include/harfbuzz/hb-cplusplus.hh new file mode 100644 index 0000000..b6b5c8f --- /dev/null +++ b/dependencies/winx64/include/harfbuzz/hb-cplusplus.hh @@ -0,0 +1,220 @@ +/* + * Copyright © 2022 Behdad Esfahbod + * + * This is part of HarfBuzz, a text shaping library. + * + * Permission is hereby granted, without written agreement and without + * license or royalty fees, to use, copy, modify, and distribute this + * software and its documentation for any purpose, provided that the + * above copyright notice and the following two paragraphs appear in + * all copies of this software. + * + * IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE TO ANY PARTY FOR + * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES + * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN + * IF THE COPYRIGHT HOLDER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + * THE COPYRIGHT HOLDER SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, + * BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND + * FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS + * ON AN "AS IS" BASIS, AND THE COPYRIGHT HOLDER HAS NO OBLIGATION TO + * PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. + */ + +#ifndef HB_CPLUSPLUS_HH +#define HB_CPLUSPLUS_HH + +#include "hb.h" + +#ifdef __cplusplus + +#include +#include + +#if 0 +#if !(__cplusplus >= 201103L) +#error "HarfBuzz C++ helpers require C++11" +#endif +#endif + +namespace hb { + + +template +struct vtable; + +template +struct shared_ptr +{ + using element_type = T; + + using v = vtable; + + explicit shared_ptr (T *p = nullptr) : p (p) {} + shared_ptr (const shared_ptr &o) : p (v::reference (o.p)) {} + shared_ptr (shared_ptr &&o) noexcept : p (o.p) { o.p = nullptr; } + shared_ptr& operator = (const shared_ptr &o) { if (p != o.p) { destroy (); p = o.p; reference (); } return *this; } + shared_ptr& operator = (shared_ptr &&o) noexcept { v::destroy (p); p = o.p; o.p = nullptr; return *this; } + ~shared_ptr () { v::destroy (p); p = nullptr; } + + T* get() const { return p; } + + void swap (shared_ptr &o) noexcept { std::swap (p, o.p); } + friend void swap (shared_ptr &a, shared_ptr &b) noexcept { std::swap (a.p, b.p); } + + operator T * () const { return p; } + T& operator * () const { return *get (); } + T* operator -> () const { return get (); } + operator bool () const { return p; } + bool operator == (const shared_ptr &o) const { return p == o.p; } + bool operator != (const shared_ptr &o) const { return p != o.p; } + + static T* get_empty() { return v::get_empty (); } + T* reference() { return v::reference (p); } + void destroy() { v::destroy (p); } + void set_user_data (hb_user_data_key_t *key, + void *value, + hb_destroy_func_t destroy, + hb_bool_t replace) { v::set_user_data (p, key, value, destroy, replace); } + void * get_user_data (hb_user_data_key_t *key) { return v::get_user_data (p, key); } + + private: + T *p; +}; + +template struct is_shared_ptr : std::false_type {}; +template struct is_shared_ptr> : std::true_type {}; + +template +struct unique_ptr +{ + using element_type = T; + + using v = vtable; + + explicit unique_ptr (T *p = nullptr) : p (p) {} + unique_ptr (const unique_ptr &o) = delete; + unique_ptr (unique_ptr &&o) noexcept : p (o.p) { o.p = nullptr; } + unique_ptr& operator = (const unique_ptr &o) = delete; + unique_ptr& operator = (unique_ptr &&o) noexcept { v::destroy (p); p = o.p; o.p = nullptr; return *this; } + ~unique_ptr () { v::destroy (p); p = nullptr; } + + T* get() const { return p; } + T* release () { T* v = p; p = nullptr; return v; } + + void swap (unique_ptr &o) noexcept { std::swap (p, o.p); } + friend void swap (unique_ptr &a, unique_ptr &b) noexcept { std::swap (a.p, b.p); } + + operator T * () const { return p; } + T& operator * () const { return *get (); } + T* operator -> () const { return get (); } + operator bool () { return p; } + + private: + T *p; +}; + +template struct is_unique_ptr : std::false_type {}; +template struct is_unique_ptr> : std::true_type {}; + +template +struct vtable_t +{ + static constexpr auto get_empty = _get_empty; + static constexpr auto reference = _reference; + static constexpr auto destroy = _destroy; + static constexpr auto set_user_data = _set_user_data; + static constexpr auto get_user_data = _get_user_data; +}; + +#define HB_DEFINE_VTABLE(name) \ + template<> \ + struct vtable \ + : vtable_t {} + +HB_DEFINE_VTABLE (buffer); +HB_DEFINE_VTABLE (blob); +HB_DEFINE_VTABLE (face); +HB_DEFINE_VTABLE (font); +HB_DEFINE_VTABLE (font_funcs); +HB_DEFINE_VTABLE (map); +HB_DEFINE_VTABLE (set); +HB_DEFINE_VTABLE (shape_plan); +HB_DEFINE_VTABLE (unicode_funcs); +HB_DEFINE_VTABLE (draw_funcs); +HB_DEFINE_VTABLE (paint_funcs); + +#undef HB_DEFINE_VTABLE + + +#ifdef HB_SUBSET_H + +#define HB_DEFINE_VTABLE(name) \ + template<> \ + struct vtable \ + : vtable_t {} + + +HB_DEFINE_VTABLE (subset_input); +HB_DEFINE_VTABLE (subset_plan); + +#undef HB_DEFINE_VTABLE + +#endif + + +} // namespace hb + +/* Workaround for GCC < 7, see: + * https://gcc.gnu.org/bugzilla/show_bug.cgi?id=56480 + * https://stackoverflow.com/a/25594741 */ +namespace std { + + +template +struct hash> +{ + std::size_t operator()(const hb::shared_ptr& v) const noexcept + { + std::size_t h = std::hash{}(v.get ()); + return h; + } +}; + +template +struct hash> +{ + std::size_t operator()(const hb::unique_ptr& v) const noexcept + { + std::size_t h = std::hash{}(v.get ()); + return h; + } +}; + + +} // namespace std + +#endif /* __cplusplus */ + +#endif /* HB_CPLUSPLUS_HH */ diff --git a/dependencies/winx64/include/harfbuzz/hb-deprecated.h b/dependencies/winx64/include/harfbuzz/hb-deprecated.h new file mode 100644 index 0000000..62911bb --- /dev/null +++ b/dependencies/winx64/include/harfbuzz/hb-deprecated.h @@ -0,0 +1,396 @@ +/* + * Copyright © 2013 Google, Inc. + * + * This is part of HarfBuzz, a text shaping library. + * + * Permission is hereby granted, without written agreement and without + * license or royalty fees, to use, copy, modify, and distribute this + * software and its documentation for any purpose, provided that the + * above copyright notice and the following two paragraphs appear in + * all copies of this software. + * + * IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE TO ANY PARTY FOR + * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES + * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN + * IF THE COPYRIGHT HOLDER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + * THE COPYRIGHT HOLDER SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, + * BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND + * FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS + * ON AN "AS IS" BASIS, AND THE COPYRIGHT HOLDER HAS NO OBLIGATION TO + * PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. + * + * Google Author(s): Behdad Esfahbod + */ + +#if !defined(HB_H_IN) && !defined(HB_NO_SINGLE_HEADER_ERROR) +#error "Include instead." +#endif + +#ifndef HB_DEPRECATED_H +#define HB_DEPRECATED_H + +#include "hb-common.h" +#include "hb-unicode.h" +#include "hb-font.h" +#include "hb-set.h" + + +/** + * SECTION:hb-deprecated + * @title: hb-deprecated + * @short_description: Deprecated API + * @include: hb.h + * + * These API have been deprecated in favor of newer API, or because they + * were deemed unnecessary. + **/ + + +HB_BEGIN_DECLS + +#ifndef HB_DISABLE_DEPRECATED + + +/** + * HB_SCRIPT_CANADIAN_ABORIGINAL: + * + * Use #HB_SCRIPT_CANADIAN_SYLLABICS instead. + * + * Deprecated: 0.9.20 + */ +#define HB_SCRIPT_CANADIAN_ABORIGINAL HB_SCRIPT_CANADIAN_SYLLABICS + +/** + * HB_BUFFER_FLAGS_DEFAULT: + * + * Use #HB_BUFFER_FLAG_DEFAULT instead. + * + * Deprecated: 0.9.20 + */ +#define HB_BUFFER_FLAGS_DEFAULT HB_BUFFER_FLAG_DEFAULT +/** + * HB_BUFFER_SERIALIZE_FLAGS_DEFAULT: + * + * Use #HB_BUFFER_SERIALIZE_FLAG_DEFAULT instead. + * + * Deprecated: 0.9.20 + */ +#define HB_BUFFER_SERIALIZE_FLAGS_DEFAULT HB_BUFFER_SERIALIZE_FLAG_DEFAULT + +/** + * hb_font_get_glyph_func_t: + * @font: #hb_font_t to work upon + * @font_data: @font user data pointer + * @unicode: The Unicode code point to query + * @variation_selector: The variation-selector code point to query + * @glyph: (out): The glyph ID retrieved + * @user_data: User data pointer passed by the caller + * + * A virtual method for the #hb_font_funcs_t of an #hb_font_t object. + * + * This method should retrieve the glyph ID for a specified Unicode code point + * font, with an optional variation selector. + * + * Return value: `true` if data found, `false` otherwise + * Deprecated: 1.2.3 + * + **/ +typedef hb_bool_t (*hb_font_get_glyph_func_t) (hb_font_t *font, void *font_data, + hb_codepoint_t unicode, hb_codepoint_t variation_selector, + hb_codepoint_t *glyph, + void *user_data); + +HB_DEPRECATED_FOR (hb_font_funcs_set_nominal_glyph_func and hb_font_funcs_set_variation_glyph_func) +HB_EXTERN void +hb_font_funcs_set_glyph_func (hb_font_funcs_t *ffuncs, + hb_font_get_glyph_func_t func, + void *user_data, hb_destroy_func_t destroy); + +/* https://github.com/harfbuzz/harfbuzz/pull/4207 */ +/** + * HB_UNICODE_COMBINING_CLASS_CCC133: + * + * [Tibetan] + * + * Deprecated: 7.2.0 + **/ +#define HB_UNICODE_COMBINING_CLASS_CCC133 133 + +/** + * hb_unicode_eastasian_width_func_t: + * @ufuncs: A Unicode-functions structure + * @unicode: The code point to query + * @user_data: User data pointer passed by the caller + * + * A virtual method for the #hb_unicode_funcs_t structure. + * + * Deprecated: 2.0.0 + */ +typedef unsigned int (*hb_unicode_eastasian_width_func_t) (hb_unicode_funcs_t *ufuncs, + hb_codepoint_t unicode, + void *user_data); + +/** + * hb_unicode_funcs_set_eastasian_width_func: + * @ufuncs: a Unicode-function structure + * @func: (closure user_data) (destroy destroy) (scope notified): The callback function to assign + * @user_data: Data to pass to @func + * @destroy: (nullable): The function to call when @user_data is not needed anymore + * + * Sets the implementation function for #hb_unicode_eastasian_width_func_t. + * + * Since: 0.9.2 + * Deprecated: 2.0.0 + **/ +HB_EXTERN HB_DEPRECATED void +hb_unicode_funcs_set_eastasian_width_func (hb_unicode_funcs_t *ufuncs, + hb_unicode_eastasian_width_func_t func, + void *user_data, hb_destroy_func_t destroy); + +/** + * hb_unicode_eastasian_width: + * @ufuncs: a Unicode-function structure + * @unicode: The code point to query + * + * Don't use. Not used by HarfBuzz. + * + * Since: 0.9.2 + * Deprecated: 2.0.0 + **/ +HB_EXTERN HB_DEPRECATED unsigned int +hb_unicode_eastasian_width (hb_unicode_funcs_t *ufuncs, + hb_codepoint_t unicode); + + +/** + * hb_unicode_decompose_compatibility_func_t: + * @ufuncs: a Unicode function structure + * @u: codepoint to decompose + * @decomposed: address of codepoint array (of length #HB_UNICODE_MAX_DECOMPOSITION_LEN) to write decomposition into + * @user_data: user data pointer as passed to hb_unicode_funcs_set_decompose_compatibility_func() + * + * Fully decompose @u to its Unicode compatibility decomposition. The codepoints of the decomposition will be written to @decomposed. + * The complete length of the decomposition will be returned. + * + * If @u has no compatibility decomposition, zero should be returned. + * + * The Unicode standard guarantees that a buffer of length #HB_UNICODE_MAX_DECOMPOSITION_LEN codepoints will always be sufficient for any + * compatibility decomposition plus an terminating value of 0. Consequently, @decompose must be allocated by the caller to be at least this length. Implementations + * of this function type must ensure that they do not write past the provided array. + * + * Return value: number of codepoints in the full compatibility decomposition of @u, or 0 if no decomposition available. + * + * Deprecated: 2.0.0 + */ +typedef unsigned int (*hb_unicode_decompose_compatibility_func_t) (hb_unicode_funcs_t *ufuncs, + hb_codepoint_t u, + hb_codepoint_t *decomposed, + void *user_data); + +/** + * HB_UNICODE_MAX_DECOMPOSITION_LEN: + * + * See Unicode 6.1 for details on the maximum decomposition length. + * + * Deprecated: 2.0.0 + */ +#define HB_UNICODE_MAX_DECOMPOSITION_LEN (18+1) /* codepoints */ + +/** + * hb_unicode_funcs_set_decompose_compatibility_func: + * @ufuncs: A Unicode-functions structure + * @func: (closure user_data) (destroy destroy) (scope notified): The callback function to assign + * @user_data: Data to pass to @func + * @destroy: (nullable): The function to call when @user_data is not needed anymore + * + * Sets the implementation function for #hb_unicode_decompose_compatibility_func_t. + * + * + * + * Since: 0.9.2 + * Deprecated: 2.0.0 + **/ +HB_EXTERN HB_DEPRECATED void +hb_unicode_funcs_set_decompose_compatibility_func (hb_unicode_funcs_t *ufuncs, + hb_unicode_decompose_compatibility_func_t func, + void *user_data, hb_destroy_func_t destroy); + +HB_EXTERN HB_DEPRECATED unsigned int +hb_unicode_decompose_compatibility (hb_unicode_funcs_t *ufuncs, + hb_codepoint_t u, + hb_codepoint_t *decomposed); + + +/** + * hb_font_get_glyph_v_kerning_func_t: + * + * A virtual method for the #hb_font_funcs_t of an #hb_font_t object. + * + * This method should retrieve the kerning-adjustment value for a glyph-pair in + * the specified font, for vertical text segments. + * + **/ +typedef hb_font_get_glyph_kerning_func_t hb_font_get_glyph_v_kerning_func_t; + +/** + * hb_font_funcs_set_glyph_v_kerning_func: + * @ffuncs: A font-function structure + * @func: (closure user_data) (destroy destroy) (scope notified): The callback function to assign + * @user_data: Data to pass to @func + * @destroy: (nullable): The function to call when @user_data is not needed anymore + * + * Sets the implementation function for #hb_font_get_glyph_v_kerning_func_t. + * + * Since: 0.9.2 + * Deprecated: 2.0.0 + **/ +HB_EXTERN void +hb_font_funcs_set_glyph_v_kerning_func (hb_font_funcs_t *ffuncs, + hb_font_get_glyph_v_kerning_func_t func, + void *user_data, hb_destroy_func_t destroy); + +HB_EXTERN hb_position_t +hb_font_get_glyph_v_kerning (hb_font_t *font, + hb_codepoint_t top_glyph, hb_codepoint_t bottom_glyph); + + +/** + * hb_font_get_glyph_shape_func_t: + * @font: #hb_font_t to work upon + * @font_data: @font user data pointer + * @glyph: The glyph ID to query + * @draw_funcs: The draw functions to send the shape data to + * @draw_data: The data accompanying the draw functions + * @user_data: User data pointer passed by the caller + * + * A virtual method for the #hb_font_funcs_t of an #hb_font_t object. + * + * Since: 4.0.0 + * Deprecated: 7.0.0: Use #hb_font_draw_glyph_func_t instead + **/ +typedef void (*hb_font_get_glyph_shape_func_t) (hb_font_t *font, void *font_data, + hb_codepoint_t glyph, + hb_draw_funcs_t *draw_funcs, void *draw_data, + void *user_data); + +/** + * hb_font_draw_glyph_func_t: + * @font: #hb_font_t to work upon + * @font_data: @font user data pointer + * @glyph: The glyph ID to query + * @draw_funcs: The draw functions to send the shape data to + * @draw_data: The data accompanying the draw functions + * @user_data: User data pointer passed by the caller + * + * A virtual method for the #hb_font_funcs_t of an #hb_font_t object. + * + * Since: 7.0.0 + * XDeprecated: REPLACEME: Use hb_font_draw_glyph_func_or_fail_t instead. + **/ +typedef void (*hb_font_draw_glyph_func_t) (hb_font_t *font, void *font_data, + hb_codepoint_t glyph, + hb_draw_funcs_t *draw_funcs, void *draw_data, + void *user_data); + +/** + * hb_font_paint_glyph_func_t: + * @font: #hb_font_t to work upon + * @font_data: @font user data pointer + * @glyph: The glyph ID to query + * @paint_funcs: The paint functions to use + * @paint_data: The data accompanying the paint functions + * @palette_index: The color palette to use + * @foreground: The foreground color + * @user_data: User data pointer passed by the caller + * + * A virtual method for the #hb_font_funcs_t of an #hb_font_t object. + * + * Since: 7.0.0 + * XDeprecated: REPLACEME: Use hb_font_paint_glyph_or_fail_func_t instead. + */ +typedef hb_bool_t (*hb_font_paint_glyph_func_t) (hb_font_t *font, void *font_data, + hb_codepoint_t glyph, + hb_paint_funcs_t *paint_funcs, void *paint_data, + unsigned int palette_index, + hb_color_t foreground, + void *user_data); + +/** + * hb_font_funcs_set_glyph_shape_func: + * @ffuncs: A font-function structure + * @func: (closure user_data) (destroy destroy) (scope notified): The callback function to assign + * @user_data: Data to pass to @func + * @destroy: (nullable): The function to call when @user_data is not needed anymore + * + * Sets the implementation function for #hb_font_get_glyph_shape_func_t, + * which is the same as #hb_font_draw_glyph_func_t. + * + * Since: 4.0.0 + * Deprecated: 7.0.0: Use hb_font_funcs_set_draw_glyph_func() instead + **/ +HB_DEPRECATED_FOR (hb_font_funcs_set_draw_glyph_or_fail_func) +HB_EXTERN void +hb_font_funcs_set_glyph_shape_func (hb_font_funcs_t *ffuncs, + hb_font_get_glyph_shape_func_t func, + void *user_data, hb_destroy_func_t destroy); + +/** + * hb_font_funcs_set_draw_glyph_func: + * @ffuncs: A font-function structure + * @func: (closure user_data) (destroy destroy) (scope notified): The callback function to assign + * @user_data: Data to pass to @func + * @destroy: (nullable): The function to call when @user_data is not needed anymore + * + * Sets the implementation function for #hb_font_draw_glyph_func_t. + * + * Since: 7.0.0 + * XDeprecated: REPLACEME: Use hb_font_funcs_set_draw_glyph_or_fail_func instead. + **/ +HB_DEPRECATED_FOR (hb_font_funcs_set_draw_glyph_or_fail_func) +HB_EXTERN void +hb_font_funcs_set_draw_glyph_func (hb_font_funcs_t *ffuncs, + hb_font_draw_glyph_func_t func, + void *user_data, hb_destroy_func_t destroy); + +/** + * hb_font_funcs_set_paint_glyph_func: + * @ffuncs: A font-function structure + * @func: (closure user_data) (destroy destroy) (scope notified): The callback function to assign + * @user_data: Data to pass to @func + * @destroy: (nullable): The function to call when @user_data is no longer needed + * + * Sets the implementation function for #hb_font_paint_glyph_func_t. + * + * Since: 7.0.0 + * XDeprecated: REPLACEME: Use hb_font_funcs_set_paint_glyph_or_fail_func() instead. + */ +HB_DEPRECATED_FOR (hb_font_funcs_set_paint_glyph_or_fail_func) +HB_EXTERN void +hb_font_funcs_set_paint_glyph_func (hb_font_funcs_t *ffuncs, + hb_font_paint_glyph_func_t func, + void *user_data, hb_destroy_func_t destroy); + +HB_DEPRECATED_FOR (hb_font_draw_glyph_or_fail) +HB_EXTERN void +hb_font_get_glyph_shape (hb_font_t *font, + hb_codepoint_t glyph, + hb_draw_funcs_t *dfuncs, void *draw_data); + + +/** + * HB_AAT_LAYOUT_FEATURE_TYPE_CURISVE_CONNECTION: + * + * Use #HB_AAT_LAYOUT_FEATURE_TYPE_CURSIVE_CONNECTION instead. + * + * Deprecated: 8.3.0 + */ +#define HB_AAT_LAYOUT_FEATURE_TYPE_CURISVE_CONNECTION HB_AAT_LAYOUT_FEATURE_TYPE_CURSIVE_CONNECTION + +#endif + + +HB_END_DECLS + +#endif /* HB_DEPRECATED_H */ diff --git a/dependencies/winx64/include/harfbuzz/hb-draw.h b/dependencies/winx64/include/harfbuzz/hb-draw.h new file mode 100644 index 0000000..76aa93f --- /dev/null +++ b/dependencies/winx64/include/harfbuzz/hb-draw.h @@ -0,0 +1,340 @@ +/* + * Copyright © 2019-2020 Ebrahim Byagowi + * + * This is part of HarfBuzz, a text shaping library. + * + * Permission is hereby granted, without written agreement and without + * license or royalty fees, to use, copy, modify, and distribute this + * software and its documentation for any purpose, provided that the + * above copyright notice and the following two paragraphs appear in + * all copies of this software. + * + * IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE TO ANY PARTY FOR + * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES + * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN + * IF THE COPYRIGHT HOLDER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + * THE COPYRIGHT HOLDER SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, + * BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND + * FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS + * ON AN "AS IS" BASIS, AND THE COPYRIGHT HOLDER HAS NO OBLIGATION TO + * PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. + */ + +#if !defined(HB_H_IN) && !defined(HB_NO_SINGLE_HEADER_ERROR) +#error "Include instead." +#endif + +#ifndef HB_DRAW_H +#define HB_DRAW_H + +#include "hb.h" + +HB_BEGIN_DECLS + + +/** + * hb_draw_state_t + * @path_open: Whether there is an open path + * @path_start_x: X component of the start of current path + * @path_start_y: Y component of the start of current path + * @current_x: X component of current point + * @current_y: Y component of current point + * + * Current drawing state. + * + * Since: 4.0.0 + **/ +typedef struct hb_draw_state_t { + hb_bool_t path_open; + + float path_start_x; + float path_start_y; + + float current_x; + float current_y; + + /*< private >*/ + hb_var_num_t reserved1; + hb_var_num_t reserved2; + hb_var_num_t reserved3; + hb_var_num_t reserved4; + hb_var_num_t reserved5; + hb_var_num_t reserved6; + hb_var_num_t reserved7; +} hb_draw_state_t; + +/** + * HB_DRAW_STATE_DEFAULT: + * + * The default #hb_draw_state_t at the start of glyph drawing. + */ +#define HB_DRAW_STATE_DEFAULT {0, 0.f, 0.f, 0.f, 0.f, {0}, {0}, {0}, {0}, {0}, {0}, {0}} + + +/** + * hb_draw_funcs_t: + * + * Glyph draw callbacks. + * + * #hb_draw_move_to_func_t, #hb_draw_line_to_func_t and + * #hb_draw_cubic_to_func_t calls are necessary to be defined but we translate + * #hb_draw_quadratic_to_func_t calls to #hb_draw_cubic_to_func_t if the + * callback isn't defined. + * + * Since: 4.0.0 + **/ + +typedef struct hb_draw_funcs_t hb_draw_funcs_t; + + +/** + * hb_draw_move_to_func_t: + * @dfuncs: draw functions object + * @draw_data: The data accompanying the draw functions in hb_font_draw_glyph() + * @st: current draw state + * @to_x: X component of target point + * @to_y: Y component of target point + * @user_data: User data pointer passed to hb_draw_funcs_set_move_to_func() + * + * A virtual method for the #hb_draw_funcs_t to perform a "move-to" draw + * operation. + * + * Since: 4.0.0 + * + **/ +typedef void (*hb_draw_move_to_func_t) (hb_draw_funcs_t *dfuncs, void *draw_data, + hb_draw_state_t *st, + float to_x, float to_y, + void *user_data); + +/** + * hb_draw_line_to_func_t: + * @dfuncs: draw functions object + * @draw_data: The data accompanying the draw functions in hb_font_draw_glyph() + * @st: current draw state + * @to_x: X component of target point + * @to_y: Y component of target point + * @user_data: User data pointer passed to hb_draw_funcs_set_line_to_func() + * + * A virtual method for the #hb_draw_funcs_t to perform a "line-to" draw + * operation. + * + * Since: 4.0.0 + * + **/ +typedef void (*hb_draw_line_to_func_t) (hb_draw_funcs_t *dfuncs, void *draw_data, + hb_draw_state_t *st, + float to_x, float to_y, + void *user_data); + +/** + * hb_draw_quadratic_to_func_t: + * @dfuncs: draw functions object + * @draw_data: The data accompanying the draw functions in hb_font_draw_glyph() + * @st: current draw state + * @control_x: X component of control point + * @control_y: Y component of control point + * @to_x: X component of target point + * @to_y: Y component of target point + * @user_data: User data pointer passed to hb_draw_funcs_set_quadratic_to_func() + * + * A virtual method for the #hb_draw_funcs_t to perform a "quadratic-to" draw + * operation. + * + * Since: 4.0.0 + * + **/ +typedef void (*hb_draw_quadratic_to_func_t) (hb_draw_funcs_t *dfuncs, void *draw_data, + hb_draw_state_t *st, + float control_x, float control_y, + float to_x, float to_y, + void *user_data); + +/** + * hb_draw_cubic_to_func_t: + * @dfuncs: draw functions object + * @draw_data: The data accompanying the draw functions in hb_font_draw_glyph() + * @st: current draw state + * @control1_x: X component of first control point + * @control1_y: Y component of first control point + * @control2_x: X component of second control point + * @control2_y: Y component of second control point + * @to_x: X component of target point + * @to_y: Y component of target point + * @user_data: User data pointer passed to hb_draw_funcs_set_cubic_to_func() + * + * A virtual method for the #hb_draw_funcs_t to perform a "cubic-to" draw + * operation. + * + * Since: 4.0.0 + * + **/ +typedef void (*hb_draw_cubic_to_func_t) (hb_draw_funcs_t *dfuncs, void *draw_data, + hb_draw_state_t *st, + float control1_x, float control1_y, + float control2_x, float control2_y, + float to_x, float to_y, + void *user_data); + +/** + * hb_draw_close_path_func_t: + * @dfuncs: draw functions object + * @draw_data: The data accompanying the draw functions in hb_font_draw_glyph() + * @st: current draw state + * @user_data: User data pointer passed to hb_draw_funcs_set_close_path_func() + * + * A virtual method for the #hb_draw_funcs_t to perform a "close-path" draw + * operation. + * + * Since: 4.0.0 + * + **/ +typedef void (*hb_draw_close_path_func_t) (hb_draw_funcs_t *dfuncs, void *draw_data, + hb_draw_state_t *st, + void *user_data); + +/** + * hb_draw_funcs_set_move_to_func: + * @dfuncs: draw functions object + * @func: (closure user_data) (destroy destroy) (scope notified): move-to callback + * @user_data: Data to pass to @func + * @destroy: (nullable): The function to call when @user_data is not needed anymore + * + * Sets move-to callback to the draw functions object. + * + * Since: 4.0.0 + **/ +HB_EXTERN void +hb_draw_funcs_set_move_to_func (hb_draw_funcs_t *dfuncs, + hb_draw_move_to_func_t func, + void *user_data, hb_destroy_func_t destroy); + +/** + * hb_draw_funcs_set_line_to_func: + * @dfuncs: draw functions object + * @func: (closure user_data) (destroy destroy) (scope notified): line-to callback + * @user_data: Data to pass to @func + * @destroy: (nullable): The function to call when @user_data is not needed anymore + * + * Sets line-to callback to the draw functions object. + * + * Since: 4.0.0 + **/ +HB_EXTERN void +hb_draw_funcs_set_line_to_func (hb_draw_funcs_t *dfuncs, + hb_draw_line_to_func_t func, + void *user_data, hb_destroy_func_t destroy); + +/** + * hb_draw_funcs_set_quadratic_to_func: + * @dfuncs: draw functions object + * @func: (closure user_data) (destroy destroy) (scope notified): quadratic-to callback + * @user_data: Data to pass to @func + * @destroy: (nullable): The function to call when @user_data is not needed anymore + * + * Sets quadratic-to callback to the draw functions object. + * + * Since: 4.0.0 + **/ +HB_EXTERN void +hb_draw_funcs_set_quadratic_to_func (hb_draw_funcs_t *dfuncs, + hb_draw_quadratic_to_func_t func, + void *user_data, hb_destroy_func_t destroy); + +/** + * hb_draw_funcs_set_cubic_to_func: + * @dfuncs: draw functions + * @func: (closure user_data) (destroy destroy) (scope notified): cubic-to callback + * @user_data: Data to pass to @func + * @destroy: (nullable): The function to call when @user_data is not needed anymore + * + * Sets cubic-to callback to the draw functions object. + * + * Since: 4.0.0 + **/ +HB_EXTERN void +hb_draw_funcs_set_cubic_to_func (hb_draw_funcs_t *dfuncs, + hb_draw_cubic_to_func_t func, + void *user_data, hb_destroy_func_t destroy); + +/** + * hb_draw_funcs_set_close_path_func: + * @dfuncs: draw functions object + * @func: (closure user_data) (destroy destroy) (scope notified): close-path callback + * @user_data: Data to pass to @func + * @destroy: (nullable): The function to call when @user_data is not needed anymore + * + * Sets close-path callback to the draw functions object. + * + * Since: 4.0.0 + **/ +HB_EXTERN void +hb_draw_funcs_set_close_path_func (hb_draw_funcs_t *dfuncs, + hb_draw_close_path_func_t func, + void *user_data, hb_destroy_func_t destroy); + + +HB_EXTERN hb_draw_funcs_t * +hb_draw_funcs_create (void); + +HB_EXTERN hb_draw_funcs_t * +hb_draw_funcs_get_empty (void); + +HB_EXTERN hb_draw_funcs_t * +hb_draw_funcs_reference (hb_draw_funcs_t *dfuncs); + +HB_EXTERN void +hb_draw_funcs_destroy (hb_draw_funcs_t *dfuncs); + +HB_EXTERN hb_bool_t +hb_draw_funcs_set_user_data (hb_draw_funcs_t *dfuncs, + hb_user_data_key_t *key, + void * data, + hb_destroy_func_t destroy, + hb_bool_t replace); + + +HB_EXTERN void * +hb_draw_funcs_get_user_data (const hb_draw_funcs_t *dfuncs, + hb_user_data_key_t *key); + +HB_EXTERN void +hb_draw_funcs_make_immutable (hb_draw_funcs_t *dfuncs); + +HB_EXTERN hb_bool_t +hb_draw_funcs_is_immutable (hb_draw_funcs_t *dfuncs); + + +HB_EXTERN void +hb_draw_move_to (hb_draw_funcs_t *dfuncs, void *draw_data, + hb_draw_state_t *st, + float to_x, float to_y); + +HB_EXTERN void +hb_draw_line_to (hb_draw_funcs_t *dfuncs, void *draw_data, + hb_draw_state_t *st, + float to_x, float to_y); + +HB_EXTERN void +hb_draw_quadratic_to (hb_draw_funcs_t *dfuncs, void *draw_data, + hb_draw_state_t *st, + float control_x, float control_y, + float to_x, float to_y); + +HB_EXTERN void +hb_draw_cubic_to (hb_draw_funcs_t *dfuncs, void *draw_data, + hb_draw_state_t *st, + float control1_x, float control1_y, + float control2_x, float control2_y, + float to_x, float to_y); + +HB_EXTERN void +hb_draw_close_path (hb_draw_funcs_t *dfuncs, void *draw_data, + hb_draw_state_t *st); + + +HB_END_DECLS + +#endif /* HB_DRAW_H */ diff --git a/dependencies/winx64/include/harfbuzz/hb-face.h b/dependencies/winx64/include/harfbuzz/hb-face.h new file mode 100644 index 0000000..b8386f0 --- /dev/null +++ b/dependencies/winx64/include/harfbuzz/hb-face.h @@ -0,0 +1,242 @@ +/* + * Copyright © 2009 Red Hat, Inc. + * + * This is part of HarfBuzz, a text shaping library. + * + * Permission is hereby granted, without written agreement and without + * license or royalty fees, to use, copy, modify, and distribute this + * software and its documentation for any purpose, provided that the + * above copyright notice and the following two paragraphs appear in + * all copies of this software. + * + * IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE TO ANY PARTY FOR + * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES + * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN + * IF THE COPYRIGHT HOLDER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + * THE COPYRIGHT HOLDER SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, + * BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND + * FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS + * ON AN "AS IS" BASIS, AND THE COPYRIGHT HOLDER HAS NO OBLIGATION TO + * PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. + * + * Red Hat Author(s): Behdad Esfahbod + */ + +#if !defined(HB_H_IN) && !defined(HB_NO_SINGLE_HEADER_ERROR) +#error "Include instead." +#endif + +#ifndef HB_FACE_H +#define HB_FACE_H + +#include "hb-common.h" +#include "hb-blob.h" +#include "hb-map.h" +#include "hb-set.h" + +HB_BEGIN_DECLS + + +HB_EXTERN unsigned int +hb_face_count (hb_blob_t *blob); + + +/* + * hb_face_t + */ + +/** + * hb_face_t: + * + * Data type for holding font faces. + * + **/ +typedef struct hb_face_t hb_face_t; + +HB_EXTERN hb_face_t * +hb_face_create (hb_blob_t *blob, + unsigned int index); + +HB_EXTERN hb_face_t * +hb_face_create_or_fail (hb_blob_t *blob, + unsigned int index); + +HB_EXTERN hb_face_t * +hb_face_create_or_fail_using (hb_blob_t *blob, + unsigned int index, + const char *loader_name); + +HB_EXTERN hb_face_t * +hb_face_create_from_file_or_fail (const char *file_name, + unsigned int index); + +HB_EXTERN hb_face_t * +hb_face_create_from_file_or_fail_using (const char *file_name, + unsigned int index, + const char *loader_name); + +HB_EXTERN const char ** +hb_face_list_loaders (void); + + +/** + * hb_reference_table_func_t: + * @face: an #hb_face_t to reference table for + * @tag: the tag of the table to reference + * @user_data: User data pointer passed by the caller + * + * Callback function for hb_face_create_for_tables(). The @tag is the tag of the + * table to reference, and the special tag #HB_TAG_NONE is used to reference the + * blob of the face itself. If referencing the face blob is not possible, it is + * recommended to set hb_get_table_tags_func_t on the @face to allow + * hb_face_reference_blob() to create a face blob out of individual table blobs. + * + * Return value: (transfer full): A pointer to the @tag table within @face or + * `NULL` if the table is not found or cannot be referenced. + * + * Since: 0.9.2 + */ + +typedef hb_blob_t * (*hb_reference_table_func_t) (hb_face_t *face, hb_tag_t tag, void *user_data); + +/* calls destroy() when not needing user_data anymore */ +HB_EXTERN hb_face_t * +hb_face_create_for_tables (hb_reference_table_func_t reference_table_func, + void *user_data, + hb_destroy_func_t destroy); + +HB_EXTERN hb_face_t * +hb_face_get_empty (void); + +HB_EXTERN hb_face_t * +hb_face_reference (hb_face_t *face); + +HB_EXTERN void +hb_face_destroy (hb_face_t *face); + +HB_EXTERN hb_bool_t +hb_face_set_user_data (hb_face_t *face, + hb_user_data_key_t *key, + void * data, + hb_destroy_func_t destroy, + hb_bool_t replace); + +HB_EXTERN void * +hb_face_get_user_data (const hb_face_t *face, + hb_user_data_key_t *key); + +HB_EXTERN void +hb_face_make_immutable (hb_face_t *face); + +HB_EXTERN hb_bool_t +hb_face_is_immutable (hb_face_t *face); + + +HB_EXTERN hb_blob_t * +hb_face_reference_table (const hb_face_t *face, + hb_tag_t tag); + +HB_EXTERN hb_blob_t * +hb_face_reference_blob (hb_face_t *face); + +HB_EXTERN void +hb_face_set_index (hb_face_t *face, + unsigned int index); + +HB_EXTERN unsigned int +hb_face_get_index (const hb_face_t *face); + +HB_EXTERN void +hb_face_set_upem (hb_face_t *face, + unsigned int upem); + +HB_EXTERN unsigned int +hb_face_get_upem (const hb_face_t *face); + +HB_EXTERN void +hb_face_set_glyph_count (hb_face_t *face, + unsigned int glyph_count); + +HB_EXTERN unsigned int +hb_face_get_glyph_count (const hb_face_t *face); + + +/** + * hb_get_table_tags_func_t: + * @face: A face object + * @start_offset: The index of first table tag to retrieve + * @table_count: (inout): Input = the maximum number of table tags to return; + * Output = the actual number of table tags returned (may be zero) + * @table_tags: (out) (array length=table_count): The array of table tags found + * @user_data: User data pointer passed by the caller + * + * Callback function for hb_face_get_table_tags(). + * + * Return value: Total number of tables, or zero if it is not possible to list + * + * Since: 10.0.0 + */ +typedef unsigned int (*hb_get_table_tags_func_t) (const hb_face_t *face, + unsigned int start_offset, + unsigned int *table_count, /* IN/OUT */ + hb_tag_t *table_tags /* OUT */, + void *user_data); + +HB_EXTERN void +hb_face_set_get_table_tags_func (hb_face_t *face, + hb_get_table_tags_func_t func, + void *user_data, + hb_destroy_func_t destroy); + +HB_EXTERN unsigned int +hb_face_get_table_tags (const hb_face_t *face, + unsigned int start_offset, + unsigned int *table_count, /* IN/OUT */ + hb_tag_t *table_tags /* OUT */); + + +/* + * Character set. + */ + +HB_EXTERN void +hb_face_collect_unicodes (hb_face_t *face, + hb_set_t *out); + +HB_EXTERN void +hb_face_collect_nominal_glyph_mapping (hb_face_t *face, + hb_map_t *mapping, + hb_set_t *unicodes); + +HB_EXTERN void +hb_face_collect_variation_selectors (hb_face_t *face, + hb_set_t *out); + +HB_EXTERN void +hb_face_collect_variation_unicodes (hb_face_t *face, + hb_codepoint_t variation_selector, + hb_set_t *out); + + +/* + * Builder face. + */ + +HB_EXTERN hb_face_t * +hb_face_builder_create (void); + +HB_EXTERN hb_bool_t +hb_face_builder_add_table (hb_face_t *face, + hb_tag_t tag, + hb_blob_t *blob); + +HB_EXTERN void +hb_face_builder_sort_tables (hb_face_t *face, + const hb_tag_t *tags); + + +HB_END_DECLS + +#endif /* HB_FACE_H */ diff --git a/dependencies/winx64/include/harfbuzz/hb-features.h b/dependencies/winx64/include/harfbuzz/hb-features.h new file mode 100644 index 0000000..0136c27 --- /dev/null +++ b/dependencies/winx64/include/harfbuzz/hb-features.h @@ -0,0 +1,119 @@ +/* + * Copyright © 2022 Red Hat, Inc. + * + * This is part of HarfBuzz, a text shaping library. + * + * Permission is hereby granted, without written agreement and without + * license or royalty fees, to use, copy, modify, and distribute this + * software and its documentation for any purpose, provided that the + * above copyright notice and the following two paragraphs appear in + * all copies of this software. + * + * IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE TO ANY PARTY FOR + * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES + * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN + * IF THE COPYRIGHT HOLDER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + * THE COPYRIGHT HOLDER SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, + * BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND + * FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS + * ON AN "AS IS" BASIS, AND THE COPYRIGHT HOLDER HAS NO OBLIGATION TO + * PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. + */ + +#ifndef HB_FEATURES_H +#define HB_FEATURES_H + +HB_BEGIN_DECLS + +/** + * SECTION: hb-features + * @title: hb-features + * @short_description: Feature detection + * @include: hb-features.h + * + * Macros for detecting optional HarfBuzz features at build time. + **/ + +/** + * HB_HAS_CAIRO: + * + * Defined if Harfbuzz has been built with cairo support. + */ +/* #undef HB_HAS_CAIRO */ + +/** + * HB_HAS_CORETEXT: + * + * Defined if Harfbuzz has been built with CoreText support. + */ +/* #undef HB_HAS_CORETEXT */ + +/** + * HB_HAS_DIRECTWRITE: + * + * Defined if Harfbuzz has been built with DirectWrite support. + */ +/* #undef HB_HAS_DIRECTWRITE */ + +/** + * HB_HAS_FREETYPE: + * + * Defined if Harfbuzz has been built with Freetype support. + */ +/* #undef HB_HAS_FREETYPE */ + +/** + * HB_HAS_GDI: + * + * Defined if Harfbuzz has been built with GDI support. + */ +/* #undef HB_HAS_GDI */ + +/** + * HB_HAS_GLIB: + * + * Defined if Harfbuzz has been built with GLib support. + */ +/* #undef HB_HAS_GLIB */ + +/** + * HB_HAS_GOBJECT: + * + * Defined if Harfbuzz has been built with GObject support. + */ +/* #undef HB_HAS_GOBJECT */ + +/** + * HB_HAS_GRAPHITE: + * + * Defined if Harfbuzz has been built with Graphite support. + */ +/* #undef HB_HAS_GRAPHITE */ + +/** + * HB_HAS_ICU: + * + * Defined if Harfbuzz has been built with ICU support. + */ +/* #undef HB_HAS_ICU */ + +/** + * HB_HAS_UNISCRIBE: + * + * Defined if Harfbuzz has been built with Uniscribe support. + */ +/* #undef HB_HAS_UNISCRIBE */ + +/** + * HB_HAS_WASM: + * + * Defined if Harfbuzz has been built with WebAssembly support. + */ +/* #undef HB_HAS_WASM */ + + +HB_END_DECLS + +#endif /* HB_FEATURES_H */ diff --git a/dependencies/winx64/include/harfbuzz/hb-font.h b/dependencies/winx64/include/harfbuzz/hb-font.h new file mode 100644 index 0000000..77178bf --- /dev/null +++ b/dependencies/winx64/include/harfbuzz/hb-font.h @@ -0,0 +1,1178 @@ +/* + * Copyright © 2009 Red Hat, Inc. + * + * This is part of HarfBuzz, a text shaping library. + * + * Permission is hereby granted, without written agreement and without + * license or royalty fees, to use, copy, modify, and distribute this + * software and its documentation for any purpose, provided that the + * above copyright notice and the following two paragraphs appear in + * all copies of this software. + * + * IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE TO ANY PARTY FOR + * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES + * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN + * IF THE COPYRIGHT HOLDER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + * THE COPYRIGHT HOLDER SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, + * BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND + * FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS + * ON AN "AS IS" BASIS, AND THE COPYRIGHT HOLDER HAS NO OBLIGATION TO + * PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. + * + * Red Hat Author(s): Behdad Esfahbod + */ + +#if !defined(HB_H_IN) && !defined(HB_NO_SINGLE_HEADER_ERROR) +#error "Include instead." +#endif + +#ifndef HB_FONT_H +#define HB_FONT_H + +#include "hb-common.h" +#include "hb-face.h" +#include "hb-draw.h" +#include "hb-paint.h" + +HB_BEGIN_DECLS + +/* + * hb_font_funcs_t + */ + +/** + * hb_font_funcs_t: + * + * Data type containing a set of virtual methods used for + * working on #hb_font_t font objects. + * + * HarfBuzz provides a lightweight default function for each of + * the methods in #hb_font_funcs_t. Client programs can implement + * their own replacements for the individual font functions, as + * needed, and replace the default by calling the setter for a + * method. + * + **/ +typedef struct hb_font_funcs_t hb_font_funcs_t; + +HB_EXTERN hb_font_funcs_t * +hb_font_funcs_create (void); + +HB_EXTERN hb_font_funcs_t * +hb_font_funcs_get_empty (void); + +HB_EXTERN hb_font_funcs_t * +hb_font_funcs_reference (hb_font_funcs_t *ffuncs); + +HB_EXTERN void +hb_font_funcs_destroy (hb_font_funcs_t *ffuncs); + +HB_EXTERN hb_bool_t +hb_font_funcs_set_user_data (hb_font_funcs_t *ffuncs, + hb_user_data_key_t *key, + void * data, + hb_destroy_func_t destroy, + hb_bool_t replace); + + +HB_EXTERN void * +hb_font_funcs_get_user_data (const hb_font_funcs_t *ffuncs, + hb_user_data_key_t *key); + + +HB_EXTERN void +hb_font_funcs_make_immutable (hb_font_funcs_t *ffuncs); + +HB_EXTERN hb_bool_t +hb_font_funcs_is_immutable (hb_font_funcs_t *ffuncs); + + +/* font extents */ + +/** + * hb_font_extents_t: + * @ascender: The height of typographic ascenders. + * @descender: The depth of typographic descenders. + * @line_gap: The suggested line-spacing gap. + * + * Font-wide extent values, measured in font units. + * + * Note that typically @ascender is positive and @descender + * negative, in coordinate systems that grow up. + **/ +typedef struct hb_font_extents_t { + hb_position_t ascender; + hb_position_t descender; + hb_position_t line_gap; + /*< private >*/ + hb_position_t reserved9; + hb_position_t reserved8; + hb_position_t reserved7; + hb_position_t reserved6; + hb_position_t reserved5; + hb_position_t reserved4; + hb_position_t reserved3; + hb_position_t reserved2; + hb_position_t reserved1; +} hb_font_extents_t; + +/* func types */ + +/** + * hb_font_get_font_extents_func_t: + * @font: #hb_font_t to work upon + * @font_data: @font user data pointer + * @extents: (out): The font extents retrieved + * @user_data: User data pointer passed by the caller + * + * This method should retrieve the extents for a font. + * + **/ +typedef hb_bool_t (*hb_font_get_font_extents_func_t) (hb_font_t *font, void *font_data, + hb_font_extents_t *extents, + void *user_data); + +/** + * hb_font_get_font_h_extents_func_t: + * + * A virtual method for the #hb_font_funcs_t of an #hb_font_t object. + * + * This method should retrieve the extents for a font, for horizontal-direction + * text segments. Extents must be returned in an #hb_glyph_extents output + * parameter. + * + **/ +typedef hb_font_get_font_extents_func_t hb_font_get_font_h_extents_func_t; + +/** + * hb_font_get_font_v_extents_func_t: + * + * A virtual method for the #hb_font_funcs_t of an #hb_font_t object. + * + * This method should retrieve the extents for a font, for vertical-direction + * text segments. Extents must be returned in an #hb_glyph_extents output + * parameter. + * + **/ +typedef hb_font_get_font_extents_func_t hb_font_get_font_v_extents_func_t; + + +/** + * hb_font_get_nominal_glyph_func_t: + * @font: #hb_font_t to work upon + * @font_data: @font user data pointer + * @unicode: The Unicode code point to query + * @glyph: (out): The glyph ID retrieved + * @user_data: User data pointer passed by the caller + * + * A virtual method for the #hb_font_funcs_t of an #hb_font_t object. + * + * This method should retrieve the nominal glyph ID for a specified Unicode code + * point. Glyph IDs must be returned in a #hb_codepoint_t output parameter. + * + * Return value: `true` if data found, `false` otherwise + * + **/ +typedef hb_bool_t (*hb_font_get_nominal_glyph_func_t) (hb_font_t *font, void *font_data, + hb_codepoint_t unicode, + hb_codepoint_t *glyph, + void *user_data); + +/** + * hb_font_get_variation_glyph_func_t: + * @font: #hb_font_t to work upon + * @font_data: @font user data pointer + * @unicode: The Unicode code point to query + * @variation_selector: The variation-selector code point to query + * @glyph: (out): The glyph ID retrieved + * @user_data: User data pointer passed by the caller + * + * A virtual method for the #hb_font_funcs_t of an #hb_font_t object. + * + * This method should retrieve the glyph ID for a specified Unicode code point + * followed by a specified Variation Selector code point. Glyph IDs must be + * returned in a #hb_codepoint_t output parameter. + * + * Return value: `true` if data found, `false` otherwise + * + **/ +typedef hb_bool_t (*hb_font_get_variation_glyph_func_t) (hb_font_t *font, void *font_data, + hb_codepoint_t unicode, hb_codepoint_t variation_selector, + hb_codepoint_t *glyph, + void *user_data); + + +/** + * hb_font_get_nominal_glyphs_func_t: + * @font: #hb_font_t to work upon + * @font_data: @font user data pointer + * @count: number of code points to query + * @first_unicode: The first Unicode code point to query + * @unicode_stride: The stride between successive code points + * @first_glyph: (out): The first glyph ID retrieved + * @glyph_stride: The stride between successive glyph IDs + * @user_data: User data pointer passed by the caller + * + * A virtual method for the #hb_font_funcs_t of an #hb_font_t object. + * + * This method should retrieve the nominal glyph IDs for a sequence of + * Unicode code points. Glyph IDs must be returned in a #hb_codepoint_t + * output parameter. + * + * Return value: the number of code points processed + * + **/ +typedef unsigned int (*hb_font_get_nominal_glyphs_func_t) (hb_font_t *font, void *font_data, + unsigned int count, + const hb_codepoint_t *first_unicode, + unsigned int unicode_stride, + hb_codepoint_t *first_glyph, + unsigned int glyph_stride, + void *user_data); + +/** + * hb_font_get_glyph_advance_func_t: + * @font: #hb_font_t to work upon + * @font_data: @font user data pointer + * @glyph: The glyph ID to query + * @user_data: User data pointer passed by the caller + * + * A virtual method for the #hb_font_funcs_t of an #hb_font_t object. + * + * This method should retrieve the advance for a specified glyph. The + * method must return an #hb_position_t. + * + * Return value: The advance of @glyph within @font + * + **/ +typedef hb_position_t (*hb_font_get_glyph_advance_func_t) (hb_font_t *font, void *font_data, + hb_codepoint_t glyph, + void *user_data); + +/** + * hb_font_get_glyph_h_advance_func_t: + * + * A virtual method for the #hb_font_funcs_t of an #hb_font_t object. + * + * This method should retrieve the advance for a specified glyph, in + * horizontal-direction text segments. Advances must be returned in + * an #hb_position_t output parameter. + * + **/ +typedef hb_font_get_glyph_advance_func_t hb_font_get_glyph_h_advance_func_t; + +/** + * hb_font_get_glyph_v_advance_func_t: + * + * A virtual method for the #hb_font_funcs_t of an #hb_font_t object. + * + * This method should retrieve the advance for a specified glyph, in + * vertical-direction text segments. Advances must be returned in + * an #hb_position_t output parameter. + * + **/ +typedef hb_font_get_glyph_advance_func_t hb_font_get_glyph_v_advance_func_t; + +/** + * hb_font_get_glyph_advances_func_t: + * @font: #hb_font_t to work upon + * @font_data: @font user data pointer + * @count: The number of glyph IDs in the sequence queried + * @first_glyph: The first glyph ID to query + * @glyph_stride: The stride between successive glyph IDs + * @first_advance: (out): The first advance retrieved + * @advance_stride: The stride between successive advances + * @user_data: User data pointer passed by the caller + * + * A virtual method for the #hb_font_funcs_t of an #hb_font_t object. + * + * This method should retrieve the advances for a sequence of glyphs. + * + **/ +typedef void (*hb_font_get_glyph_advances_func_t) (hb_font_t* font, void* font_data, + unsigned int count, + const hb_codepoint_t *first_glyph, + unsigned glyph_stride, + hb_position_t *first_advance, + unsigned advance_stride, + void *user_data); + +/** + * hb_font_get_glyph_h_advances_func_t: + * + * A virtual method for the #hb_font_funcs_t of an #hb_font_t object. + * + * This method should retrieve the advances for a sequence of glyphs, in + * horizontal-direction text segments. + * + **/ +typedef hb_font_get_glyph_advances_func_t hb_font_get_glyph_h_advances_func_t; + +/** + * hb_font_get_glyph_v_advances_func_t: + * + * A virtual method for the #hb_font_funcs_t of an #hb_font_t object. + * + * This method should retrieve the advances for a sequence of glyphs, in + * vertical-direction text segments. + * + **/ +typedef hb_font_get_glyph_advances_func_t hb_font_get_glyph_v_advances_func_t; + +/** + * hb_font_get_glyph_origin_func_t: + * @font: #hb_font_t to work upon + * @font_data: @font user data pointer + * @glyph: The glyph ID to query + * @x: (out): The X coordinate of the origin + * @y: (out): The Y coordinate of the origin + * @user_data: User data pointer passed by the caller + * + * A virtual method for the #hb_font_funcs_t of an #hb_font_t object. + * + * This method should retrieve the (X,Y) coordinates (in font units) of the + * origin for a glyph. Each coordinate must be returned in an #hb_position_t + * output parameter. + * + * Return value: `true` if data found, `false` otherwise + * + **/ +typedef hb_bool_t (*hb_font_get_glyph_origin_func_t) (hb_font_t *font, void *font_data, + hb_codepoint_t glyph, + hb_position_t *x, hb_position_t *y, + void *user_data); + +/** + * hb_font_get_glyph_h_origin_func_t: + * + * A virtual method for the #hb_font_funcs_t of an #hb_font_t object. + * + * This method should retrieve the (X,Y) coordinates (in font units) of the + * origin for a glyph, for horizontal-direction text segments. Each + * coordinate must be returned in an #hb_position_t output parameter. + * + **/ +typedef hb_font_get_glyph_origin_func_t hb_font_get_glyph_h_origin_func_t; + +/** + * hb_font_get_glyph_v_origin_func_t: + * + * A virtual method for the #hb_font_funcs_t of an #hb_font_t object. + * + * This method should retrieve the (X,Y) coordinates (in font units) of the + * origin for a glyph, for vertical-direction text segments. Each coordinate + * must be returned in an #hb_position_t output parameter. + * + **/ +typedef hb_font_get_glyph_origin_func_t hb_font_get_glyph_v_origin_func_t; + +/** + * hb_font_get_glyph_kerning_func_t: + * @font: #hb_font_t to work upon + * @font_data: @font user data pointer + * @first_glyph: The glyph ID of the first glyph in the glyph pair + * @second_glyph: The glyph ID of the second glyph in the glyph pair + * @user_data: User data pointer passed by the caller + * + * This method should retrieve the kerning-adjustment value for a glyph-pair in + * the specified font, for horizontal text segments. + * + **/ +typedef hb_position_t (*hb_font_get_glyph_kerning_func_t) (hb_font_t *font, void *font_data, + hb_codepoint_t first_glyph, hb_codepoint_t second_glyph, + void *user_data); +/** + * hb_font_get_glyph_h_kerning_func_t: + * + * A virtual method for the #hb_font_funcs_t of an #hb_font_t object. + * + * This method should retrieve the kerning-adjustment value for a glyph-pair in + * the specified font, for horizontal text segments. + * + **/ +typedef hb_font_get_glyph_kerning_func_t hb_font_get_glyph_h_kerning_func_t; + + +/** + * hb_font_get_glyph_extents_func_t: + * @font: #hb_font_t to work upon + * @font_data: @font user data pointer + * @glyph: The glyph ID to query + * @extents: (out): The #hb_glyph_extents_t retrieved + * @user_data: User data pointer passed by the caller + * + * A virtual method for the #hb_font_funcs_t of an #hb_font_t object. + * + * This method should retrieve the extents for a specified glyph. Extents must be + * returned in an #hb_glyph_extents output parameter. + * + * Return value: `true` if data found, `false` otherwise + * + **/ +typedef hb_bool_t (*hb_font_get_glyph_extents_func_t) (hb_font_t *font, void *font_data, + hb_codepoint_t glyph, + hb_glyph_extents_t *extents, + void *user_data); + +/** + * hb_font_get_glyph_contour_point_func_t: + * @font: #hb_font_t to work upon + * @font_data: @font user data pointer + * @glyph: The glyph ID to query + * @point_index: The contour-point index to query + * @x: (out): The X value retrieved for the contour point + * @y: (out): The Y value retrieved for the contour point + * @user_data: User data pointer passed by the caller + * + * A virtual method for the #hb_font_funcs_t of an #hb_font_t object. + * + * This method should retrieve the (X,Y) coordinates (in font units) for a + * specified contour point in a glyph. Each coordinate must be returned as + * an #hb_position_t output parameter. + * + * Return value: `true` if data found, `false` otherwise + * + **/ +typedef hb_bool_t (*hb_font_get_glyph_contour_point_func_t) (hb_font_t *font, void *font_data, + hb_codepoint_t glyph, unsigned int point_index, + hb_position_t *x, hb_position_t *y, + void *user_data); + + +/** + * hb_font_get_glyph_name_func_t: + * @font: #hb_font_t to work upon + * @font_data: @font user data pointer + * @glyph: The glyph ID to query + * @name: (out) (array length=size): Name string retrieved for the glyph ID + * @size: Length of the glyph-name string retrieved + * @user_data: User data pointer passed by the caller + * + * A virtual method for the #hb_font_funcs_t of an #hb_font_t object. + * + * This method should retrieve the glyph name that corresponds to a + * glyph ID. The name should be returned in a string output parameter. + * + * Return value: `true` if data found, `false` otherwise + * + **/ +typedef hb_bool_t (*hb_font_get_glyph_name_func_t) (hb_font_t *font, void *font_data, + hb_codepoint_t glyph, + char *name, unsigned int size, + void *user_data); + +/** + * hb_font_get_glyph_from_name_func_t: + * @font: #hb_font_t to work upon + * @font_data: @font user data pointer + * @name: (array length=len): The name string to query + * @len: The length of the name queried + * @glyph: (out): The glyph ID retrieved + * @user_data: User data pointer passed by the caller + * + * A virtual method for the #hb_font_funcs_t of an #hb_font_t object. + * + * This method should retrieve the glyph ID that corresponds to a glyph-name + * string. + * + * Return value: `true` if data found, `false` otherwise + * + **/ +typedef hb_bool_t (*hb_font_get_glyph_from_name_func_t) (hb_font_t *font, void *font_data, + const char *name, int len, /* -1 means nul-terminated */ + hb_codepoint_t *glyph, + void *user_data); + +/** + * hb_font_draw_glyph_or_fail_func_t: + * @font: #hb_font_t to work upon + * @font_data: @font user data pointer + * @glyph: The glyph ID to query + * @draw_funcs: The draw functions to send the shape data to + * @draw_data: The data accompanying the draw functions + * @user_data: User data pointer passed by the caller + * + * A virtual method for the #hb_font_funcs_t of an #hb_font_t object. + * + * Return value: `true` if glyph was drawn, `false` otherwise + * + * XSince: REPLACEME + **/ +typedef hb_bool_t (*hb_font_draw_glyph_or_fail_func_t) (hb_font_t *font, void *font_data, + hb_codepoint_t glyph, + hb_draw_funcs_t *draw_funcs, void *draw_data, + void *user_data); + +/** + * hb_font_paint_glyph_or_fail_func_t: + * @font: #hb_font_t to work upon + * @font_data: @font user data pointer + * @glyph: The glyph ID to query + * @paint_funcs: The paint functions to use + * @paint_data: The data accompanying the paint functions + * @palette_index: The color palette to use + * @foreground: The foreground color + * @user_data: User data pointer passed by the caller + * + * A virtual method for the #hb_font_funcs_t of an #hb_font_t object. + * + * Return value: `true` if glyph was painted, `false` otherwise + * + * XSince: REPLACEME + */ +typedef hb_bool_t (*hb_font_paint_glyph_or_fail_func_t) (hb_font_t *font, void *font_data, + hb_codepoint_t glyph, + hb_paint_funcs_t *paint_funcs, void *paint_data, + unsigned int palette_index, + hb_color_t foreground, + void *user_data); + +/* func setters */ + +/** + * hb_font_funcs_set_font_h_extents_func: + * @ffuncs: A font-function structure + * @func: (closure user_data) (destroy destroy) (scope notified): The callback function to assign + * @user_data: Data to pass to @func + * @destroy: (nullable): The function to call when @user_data is not needed anymore + * + * Sets the implementation function for #hb_font_get_font_h_extents_func_t. + * + * Since: 1.1.2 + **/ +HB_EXTERN void +hb_font_funcs_set_font_h_extents_func (hb_font_funcs_t *ffuncs, + hb_font_get_font_h_extents_func_t func, + void *user_data, hb_destroy_func_t destroy); + +/** + * hb_font_funcs_set_font_v_extents_func: + * @ffuncs: A font-function structure + * @func: (closure user_data) (destroy destroy) (scope notified): The callback function to assign + * @user_data: Data to pass to @func + * @destroy: (nullable): The function to call when @user_data is not needed anymore + * + * Sets the implementation function for #hb_font_get_font_v_extents_func_t. + * + * Since: 1.1.2 + **/ +HB_EXTERN void +hb_font_funcs_set_font_v_extents_func (hb_font_funcs_t *ffuncs, + hb_font_get_font_v_extents_func_t func, + void *user_data, hb_destroy_func_t destroy); + +/** + * hb_font_funcs_set_nominal_glyph_func: + * @ffuncs: A font-function structure + * @func: (closure user_data) (destroy destroy) (scope notified): The callback function to assign + * @user_data: Data to pass to @func + * @destroy: (nullable): The function to call when @user_data is not needed anymore + * + * Sets the implementation function for #hb_font_get_nominal_glyph_func_t. + * + * Since: 1.2.3 + **/ +HB_EXTERN void +hb_font_funcs_set_nominal_glyph_func (hb_font_funcs_t *ffuncs, + hb_font_get_nominal_glyph_func_t func, + void *user_data, hb_destroy_func_t destroy); + +/** + * hb_font_funcs_set_nominal_glyphs_func: + * @ffuncs: A font-function structure + * @func: (closure user_data) (destroy destroy) (scope notified): The callback function to assign + * @user_data: Data to pass to @func + * @destroy: (nullable): The function to call when @user_data is not needed anymore + * + * Sets the implementation function for #hb_font_get_nominal_glyphs_func_t. + * + * Since: 2.0.0 + **/ +HB_EXTERN void +hb_font_funcs_set_nominal_glyphs_func (hb_font_funcs_t *ffuncs, + hb_font_get_nominal_glyphs_func_t func, + void *user_data, hb_destroy_func_t destroy); + +/** + * hb_font_funcs_set_variation_glyph_func: + * @ffuncs: A font-function structure + * @func: (closure user_data) (destroy destroy) (scope notified): The callback function to assign + * @user_data: Data to pass to @func + * @destroy: (nullable): The function to call when @user_data is not needed anymore + * + * Sets the implementation function for #hb_font_get_variation_glyph_func_t. + * + * Since: 1.2.3 + **/ +HB_EXTERN void +hb_font_funcs_set_variation_glyph_func (hb_font_funcs_t *ffuncs, + hb_font_get_variation_glyph_func_t func, + void *user_data, hb_destroy_func_t destroy); + +/** + * hb_font_funcs_set_glyph_h_advance_func: + * @ffuncs: A font-function structure + * @func: (closure user_data) (destroy destroy) (scope notified): The callback function to assign + * @user_data: Data to pass to @func + * @destroy: (nullable): The function to call when @user_data is not needed anymore + * + * Sets the implementation function for #hb_font_get_glyph_h_advance_func_t. + * + * Since: 0.9.2 + **/ +HB_EXTERN void +hb_font_funcs_set_glyph_h_advance_func (hb_font_funcs_t *ffuncs, + hb_font_get_glyph_h_advance_func_t func, + void *user_data, hb_destroy_func_t destroy); + +/** + * hb_font_funcs_set_glyph_v_advance_func: + * @ffuncs: A font-function structure + * @func: (closure user_data) (destroy destroy) (scope notified): The callback function to assign + * @user_data: Data to pass to @func + * @destroy: (nullable): The function to call when @user_data is not needed anymore + * + * Sets the implementation function for #hb_font_get_glyph_v_advance_func_t. + * + * Since: 0.9.2 + **/ +HB_EXTERN void +hb_font_funcs_set_glyph_v_advance_func (hb_font_funcs_t *ffuncs, + hb_font_get_glyph_v_advance_func_t func, + void *user_data, hb_destroy_func_t destroy); + +/** + * hb_font_funcs_set_glyph_h_advances_func: + * @ffuncs: A font-function structure + * @func: (closure user_data) (destroy destroy) (scope notified): The callback function to assign + * @user_data: Data to pass to @func + * @destroy: (nullable): The function to call when @user_data is not needed anymore + * + * Sets the implementation function for #hb_font_get_glyph_h_advances_func_t. + * + * Since: 1.8.6 + **/ +HB_EXTERN void +hb_font_funcs_set_glyph_h_advances_func (hb_font_funcs_t *ffuncs, + hb_font_get_glyph_h_advances_func_t func, + void *user_data, hb_destroy_func_t destroy); + +/** + * hb_font_funcs_set_glyph_v_advances_func: + * @ffuncs: A font-function structure + * @func: (closure user_data) (destroy destroy) (scope notified): The callback function to assign + * @user_data: Data to pass to @func + * @destroy: (nullable): The function to call when @user_data is not needed anymore + * + * Sets the implementation function for #hb_font_get_glyph_v_advances_func_t. + * + * Since: 1.8.6 + **/ +HB_EXTERN void +hb_font_funcs_set_glyph_v_advances_func (hb_font_funcs_t *ffuncs, + hb_font_get_glyph_v_advances_func_t func, + void *user_data, hb_destroy_func_t destroy); + +/** + * hb_font_funcs_set_glyph_h_origin_func: + * @ffuncs: A font-function structure + * @func: (closure user_data) (destroy destroy) (scope notified): The callback function to assign + * @user_data: Data to pass to @func + * @destroy: (nullable): The function to call when @user_data is not needed anymore + * + * Sets the implementation function for #hb_font_get_glyph_h_origin_func_t. + * + * Since: 0.9.2 + **/ +HB_EXTERN void +hb_font_funcs_set_glyph_h_origin_func (hb_font_funcs_t *ffuncs, + hb_font_get_glyph_h_origin_func_t func, + void *user_data, hb_destroy_func_t destroy); + +/** + * hb_font_funcs_set_glyph_v_origin_func: + * @ffuncs: A font-function structure + * @func: (closure user_data) (destroy destroy) (scope notified): The callback function to assign + * @user_data: Data to pass to @func + * @destroy: (nullable): The function to call when @user_data is not needed anymore + * + * Sets the implementation function for #hb_font_get_glyph_v_origin_func_t. + * + * Since: 0.9.2 + **/ +HB_EXTERN void +hb_font_funcs_set_glyph_v_origin_func (hb_font_funcs_t *ffuncs, + hb_font_get_glyph_v_origin_func_t func, + void *user_data, hb_destroy_func_t destroy); + +/** + * hb_font_funcs_set_glyph_h_kerning_func: + * @ffuncs: A font-function structure + * @func: (closure user_data) (destroy destroy) (scope notified): The callback function to assign + * @user_data: Data to pass to @func + * @destroy: (nullable): The function to call when @user_data is not needed anymore + * + * Sets the implementation function for #hb_font_get_glyph_h_kerning_func_t. + * + * Since: 0.9.2 + **/ +HB_EXTERN void +hb_font_funcs_set_glyph_h_kerning_func (hb_font_funcs_t *ffuncs, + hb_font_get_glyph_h_kerning_func_t func, + void *user_data, hb_destroy_func_t destroy); + +/** + * hb_font_funcs_set_glyph_extents_func: + * @ffuncs: A font-function structure + * @func: (closure user_data) (destroy destroy) (scope notified): The callback function to assign + * @user_data: Data to pass to @func + * @destroy: (nullable): The function to call when @user_data is not needed anymore + * + * Sets the implementation function for #hb_font_get_glyph_extents_func_t. + * + * Since: 0.9.2 + **/ +HB_EXTERN void +hb_font_funcs_set_glyph_extents_func (hb_font_funcs_t *ffuncs, + hb_font_get_glyph_extents_func_t func, + void *user_data, hb_destroy_func_t destroy); + +/** + * hb_font_funcs_set_glyph_contour_point_func: + * @ffuncs: A font-function structure + * @func: (closure user_data) (destroy destroy) (scope notified): The callback function to assign + * @user_data: Data to pass to @func + * @destroy: (nullable): The function to call when @user_data is not needed anymore + * + * Sets the implementation function for #hb_font_get_glyph_contour_point_func_t. + * + * Since: 0.9.2 + **/ +HB_EXTERN void +hb_font_funcs_set_glyph_contour_point_func (hb_font_funcs_t *ffuncs, + hb_font_get_glyph_contour_point_func_t func, + void *user_data, hb_destroy_func_t destroy); + +/** + * hb_font_funcs_set_glyph_name_func: + * @ffuncs: A font-function structure + * @func: (closure user_data) (destroy destroy) (scope notified): The callback function to assign + * @user_data: Data to pass to @func + * @destroy: (nullable): The function to call when @user_data is not needed anymore + * + * Sets the implementation function for #hb_font_get_glyph_name_func_t. + * + * Since: 0.9.2 + **/ +HB_EXTERN void +hb_font_funcs_set_glyph_name_func (hb_font_funcs_t *ffuncs, + hb_font_get_glyph_name_func_t func, + void *user_data, hb_destroy_func_t destroy); + +/** + * hb_font_funcs_set_glyph_from_name_func: + * @ffuncs: A font-function structure + * @func: (closure user_data) (destroy destroy) (scope notified): The callback function to assign + * @user_data: Data to pass to @func + * @destroy: (nullable): The function to call when @user_data is not needed anymore + * + * Sets the implementation function for #hb_font_get_glyph_from_name_func_t. + * + * Since: 0.9.2 + **/ +HB_EXTERN void +hb_font_funcs_set_glyph_from_name_func (hb_font_funcs_t *ffuncs, + hb_font_get_glyph_from_name_func_t func, + void *user_data, hb_destroy_func_t destroy); + +/** + * hb_font_funcs_set_draw_glyph_or_fail_func: + * @ffuncs: A font-function structure + * @func: (closure user_data) (destroy destroy) (scope notified): The callback function to assign + * @user_data: Data to pass to @func + * @destroy: (nullable): The function to call when @user_data is not needed anymore + * + * Sets the implementation function for #hb_font_draw_glyph_or_fail_func_t. + * + * XSince: REPLACEME + **/ +HB_EXTERN void +hb_font_funcs_set_draw_glyph_or_fail_func (hb_font_funcs_t *ffuncs, + hb_font_draw_glyph_or_fail_func_t func, + void *user_data, hb_destroy_func_t destroy); + +/** + * hb_font_funcs_set_paint_glyph_or_fail_func: + * @ffuncs: A font-function structure + * @func: (closure user_data) (destroy destroy) (scope notified): The callback function to assign + * @user_data: Data to pass to @func + * @destroy: (nullable): The function to call when @user_data is no longer needed + * + * Sets the implementation function for #hb_font_paint_glyph_or_fail_func_t. + * + * XSince: REPLACEME + */ +HB_EXTERN void +hb_font_funcs_set_paint_glyph_or_fail_func (hb_font_funcs_t *ffuncs, + hb_font_paint_glyph_or_fail_func_t func, + void *user_data, hb_destroy_func_t destroy); + +/* func dispatch */ + +HB_EXTERN hb_bool_t +hb_font_get_h_extents (hb_font_t *font, + hb_font_extents_t *extents); +HB_EXTERN hb_bool_t +hb_font_get_v_extents (hb_font_t *font, + hb_font_extents_t *extents); + +HB_EXTERN hb_bool_t +hb_font_get_nominal_glyph (hb_font_t *font, + hb_codepoint_t unicode, + hb_codepoint_t *glyph); +HB_EXTERN hb_bool_t +hb_font_get_variation_glyph (hb_font_t *font, + hb_codepoint_t unicode, hb_codepoint_t variation_selector, + hb_codepoint_t *glyph); + +HB_EXTERN unsigned int +hb_font_get_nominal_glyphs (hb_font_t *font, + unsigned int count, + const hb_codepoint_t *first_unicode, + unsigned int unicode_stride, + hb_codepoint_t *first_glyph, + unsigned int glyph_stride); + +HB_EXTERN hb_position_t +hb_font_get_glyph_h_advance (hb_font_t *font, + hb_codepoint_t glyph); +HB_EXTERN hb_position_t +hb_font_get_glyph_v_advance (hb_font_t *font, + hb_codepoint_t glyph); + +HB_EXTERN void +hb_font_get_glyph_h_advances (hb_font_t* font, + unsigned int count, + const hb_codepoint_t *first_glyph, + unsigned glyph_stride, + hb_position_t *first_advance, + unsigned advance_stride); +HB_EXTERN void +hb_font_get_glyph_v_advances (hb_font_t* font, + unsigned int count, + const hb_codepoint_t *first_glyph, + unsigned glyph_stride, + hb_position_t *first_advance, + unsigned advance_stride); + +HB_EXTERN hb_bool_t +hb_font_get_glyph_h_origin (hb_font_t *font, + hb_codepoint_t glyph, + hb_position_t *x, hb_position_t *y); +HB_EXTERN hb_bool_t +hb_font_get_glyph_v_origin (hb_font_t *font, + hb_codepoint_t glyph, + hb_position_t *x, hb_position_t *y); + +HB_EXTERN hb_position_t +hb_font_get_glyph_h_kerning (hb_font_t *font, + hb_codepoint_t left_glyph, hb_codepoint_t right_glyph); + +HB_EXTERN hb_bool_t +hb_font_get_glyph_extents (hb_font_t *font, + hb_codepoint_t glyph, + hb_glyph_extents_t *extents); + +HB_EXTERN hb_bool_t +hb_font_get_glyph_contour_point (hb_font_t *font, + hb_codepoint_t glyph, unsigned int point_index, + hb_position_t *x, hb_position_t *y); + +HB_EXTERN hb_bool_t +hb_font_get_glyph_name (hb_font_t *font, + hb_codepoint_t glyph, + char *name, unsigned int size); +HB_EXTERN hb_bool_t +hb_font_get_glyph_from_name (hb_font_t *font, + const char *name, int len, /* -1 means nul-terminated */ + hb_codepoint_t *glyph); + +HB_EXTERN hb_bool_t +hb_font_draw_glyph_or_fail (hb_font_t *font, + hb_codepoint_t glyph, + hb_draw_funcs_t *dfuncs, void *draw_data); + +HB_EXTERN hb_bool_t +hb_font_paint_glyph_or_fail (hb_font_t *font, + hb_codepoint_t glyph, + hb_paint_funcs_t *pfuncs, void *paint_data, + unsigned int palette_index, + hb_color_t foreground); + +/* high-level funcs, with fallback */ + +/* Calls either hb_font_get_nominal_glyph() if variation_selector is 0, + * otherwise calls hb_font_get_variation_glyph(). */ +HB_EXTERN hb_bool_t +hb_font_get_glyph (hb_font_t *font, + hb_codepoint_t unicode, hb_codepoint_t variation_selector, + hb_codepoint_t *glyph); + +HB_EXTERN void +hb_font_get_extents_for_direction (hb_font_t *font, + hb_direction_t direction, + hb_font_extents_t *extents); +HB_EXTERN void +hb_font_get_glyph_advance_for_direction (hb_font_t *font, + hb_codepoint_t glyph, + hb_direction_t direction, + hb_position_t *x, hb_position_t *y); +HB_EXTERN void +hb_font_get_glyph_advances_for_direction (hb_font_t* font, + hb_direction_t direction, + unsigned int count, + const hb_codepoint_t *first_glyph, + unsigned glyph_stride, + hb_position_t *first_advance, + unsigned advance_stride); +HB_EXTERN void +hb_font_get_glyph_origin_for_direction (hb_font_t *font, + hb_codepoint_t glyph, + hb_direction_t direction, + hb_position_t *x, hb_position_t *y); +HB_EXTERN void +hb_font_add_glyph_origin_for_direction (hb_font_t *font, + hb_codepoint_t glyph, + hb_direction_t direction, + hb_position_t *x, hb_position_t *y); +HB_EXTERN void +hb_font_subtract_glyph_origin_for_direction (hb_font_t *font, + hb_codepoint_t glyph, + hb_direction_t direction, + hb_position_t *x, hb_position_t *y); + +HB_EXTERN void +hb_font_get_glyph_kerning_for_direction (hb_font_t *font, + hb_codepoint_t first_glyph, hb_codepoint_t second_glyph, + hb_direction_t direction, + hb_position_t *x, hb_position_t *y); + +HB_EXTERN hb_bool_t +hb_font_get_glyph_extents_for_origin (hb_font_t *font, + hb_codepoint_t glyph, + hb_direction_t direction, + hb_glyph_extents_t *extents); + +HB_EXTERN hb_bool_t +hb_font_get_glyph_contour_point_for_origin (hb_font_t *font, + hb_codepoint_t glyph, unsigned int point_index, + hb_direction_t direction, + hb_position_t *x, hb_position_t *y); + +/* Generates gidDDD if glyph has no name. */ +HB_EXTERN void +hb_font_glyph_to_string (hb_font_t *font, + hb_codepoint_t glyph, + char *s, unsigned int size); +/* Parses gidDDD and uniUUUU strings automatically. */ +HB_EXTERN hb_bool_t +hb_font_glyph_from_string (hb_font_t *font, + const char *s, int len, /* -1 means nul-terminated */ + hb_codepoint_t *glyph); + +/* Older alias for hb_font_draw_glyph_or_fail() with no return value. */ +HB_EXTERN void +hb_font_draw_glyph (hb_font_t *font, + hb_codepoint_t glyph, + hb_draw_funcs_t *dfuncs, void *draw_data); + +/* Paints color glyph; if failed, draws outline glyph. */ +HB_EXTERN void +hb_font_paint_glyph (hb_font_t *font, + hb_codepoint_t glyph, + hb_paint_funcs_t *pfuncs, void *paint_data, + unsigned int palette_index, + hb_color_t foreground); + +/* + * hb_font_t + */ + +/* Fonts are very light-weight objects */ + +HB_EXTERN hb_font_t * +hb_font_create (hb_face_t *face); + +HB_EXTERN hb_font_t * +hb_font_create_sub_font (hb_font_t *parent); + +HB_EXTERN hb_font_t * +hb_font_get_empty (void); + +HB_EXTERN hb_font_t * +hb_font_reference (hb_font_t *font); + +HB_EXTERN void +hb_font_destroy (hb_font_t *font); + +HB_EXTERN hb_bool_t +hb_font_set_user_data (hb_font_t *font, + hb_user_data_key_t *key, + void * data, + hb_destroy_func_t destroy, + hb_bool_t replace); + + +HB_EXTERN void * +hb_font_get_user_data (const hb_font_t *font, + hb_user_data_key_t *key); + +HB_EXTERN void +hb_font_make_immutable (hb_font_t *font); + +HB_EXTERN hb_bool_t +hb_font_is_immutable (hb_font_t *font); + +HB_EXTERN unsigned int +hb_font_get_serial (hb_font_t *font); + +HB_EXTERN void +hb_font_changed (hb_font_t *font); + +HB_EXTERN void +hb_font_set_parent (hb_font_t *font, + hb_font_t *parent); + +HB_EXTERN hb_font_t * +hb_font_get_parent (hb_font_t *font); + +HB_EXTERN void +hb_font_set_face (hb_font_t *font, + hb_face_t *face); + +HB_EXTERN hb_face_t * +hb_font_get_face (hb_font_t *font); + + +HB_EXTERN void +hb_font_set_funcs (hb_font_t *font, + hb_font_funcs_t *klass, + void *font_data, + hb_destroy_func_t destroy); + +/* Be *very* careful with this function! */ +HB_EXTERN void +hb_font_set_funcs_data (hb_font_t *font, + void *font_data, + hb_destroy_func_t destroy); + +HB_EXTERN hb_bool_t +hb_font_set_funcs_using (hb_font_t *font, + const char *name); + +HB_EXTERN const char ** +hb_font_list_funcs (void); + +HB_EXTERN void +hb_font_set_scale (hb_font_t *font, + int x_scale, + int y_scale); + +HB_EXTERN void +hb_font_get_scale (hb_font_t *font, + int *x_scale, + int *y_scale); + +/* + * A zero value means "no hinting in that direction" + */ +HB_EXTERN void +hb_font_set_ppem (hb_font_t *font, + unsigned int x_ppem, + unsigned int y_ppem); + +HB_EXTERN void +hb_font_get_ppem (hb_font_t *font, + unsigned int *x_ppem, + unsigned int *y_ppem); + +/* + * Point size per EM. Used for optical-sizing in CoreText. + * A value of zero means "not set". + */ +HB_EXTERN void +hb_font_set_ptem (hb_font_t *font, float ptem); + +HB_EXTERN float +hb_font_get_ptem (hb_font_t *font); + +HB_EXTERN hb_bool_t +hb_font_is_synthetic (hb_font_t *font); + +HB_EXTERN void +hb_font_set_synthetic_bold (hb_font_t *font, + float x_embolden, float y_embolden, + hb_bool_t in_place); + +HB_EXTERN void +hb_font_get_synthetic_bold (hb_font_t *font, + float *x_embolden, float *y_embolden, + hb_bool_t *in_place); + +HB_EXTERN void +hb_font_set_synthetic_slant (hb_font_t *font, float slant); + +HB_EXTERN float +hb_font_get_synthetic_slant (hb_font_t *font); + +HB_EXTERN void +hb_font_set_variations (hb_font_t *font, + const hb_variation_t *variations, + unsigned int variations_length); + +HB_EXTERN void +hb_font_set_variation (hb_font_t *font, + hb_tag_t tag, + float value); + +HB_EXTERN void +hb_font_set_var_coords_design (hb_font_t *font, + const float *coords, + unsigned int coords_length); + +HB_EXTERN const float * +hb_font_get_var_coords_design (hb_font_t *font, + unsigned int *length); + +HB_EXTERN void +hb_font_set_var_coords_normalized (hb_font_t *font, + const int *coords, /* 2.14 normalized */ + unsigned int coords_length); + +HB_EXTERN const int * +hb_font_get_var_coords_normalized (hb_font_t *font, + unsigned int *length); + +/** + * HB_FONT_NO_VAR_NAMED_INSTANCE: + * + * Constant signifying that a font does not have any + * named-instance index set. This is the default of + * a font. + * + * Since: 7.0.0 + */ +#define HB_FONT_NO_VAR_NAMED_INSTANCE 0xFFFFFFFF + +HB_EXTERN void +hb_font_set_var_named_instance (hb_font_t *font, + unsigned int instance_index); + +HB_EXTERN unsigned int +hb_font_get_var_named_instance (hb_font_t *font); + +HB_END_DECLS + +#endif /* HB_FONT_H */ diff --git a/dependencies/winx64/include/harfbuzz/hb-map.h b/dependencies/winx64/include/harfbuzz/hb-map.h new file mode 100644 index 0000000..0ae1717 --- /dev/null +++ b/dependencies/winx64/include/harfbuzz/hb-map.h @@ -0,0 +1,143 @@ +/* + * Copyright © 2018 Google, Inc. + * + * This is part of HarfBuzz, a text shaping library. + * + * Permission is hereby granted, without written agreement and without + * license or royalty fees, to use, copy, modify, and distribute this + * software and its documentation for any purpose, provided that the + * above copyright notice and the following two paragraphs appear in + * all copies of this software. + * + * IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE TO ANY PARTY FOR + * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES + * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN + * IF THE COPYRIGHT HOLDER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + * THE COPYRIGHT HOLDER SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, + * BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND + * FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS + * ON AN "AS IS" BASIS, AND THE COPYRIGHT HOLDER HAS NO OBLIGATION TO + * PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. + * + * Google Author(s): Behdad Esfahbod + */ + +#if !defined(HB_H_IN) && !defined(HB_NO_SINGLE_HEADER_ERROR) +#error "Include instead." +#endif + +#ifndef HB_MAP_H +#define HB_MAP_H + +#include "hb-common.h" +#include "hb-set.h" + +HB_BEGIN_DECLS + + +/** + * HB_MAP_VALUE_INVALID: + * + * Unset #hb_map_t value. + * + * Since: 1.7.7 + */ +#define HB_MAP_VALUE_INVALID HB_CODEPOINT_INVALID + +/** + * hb_map_t: + * + * Data type for holding integer-to-integer hash maps. + * + **/ +typedef struct hb_map_t hb_map_t; + + +HB_EXTERN hb_map_t * +hb_map_create (void); + +HB_EXTERN hb_map_t * +hb_map_get_empty (void); + +HB_EXTERN hb_map_t * +hb_map_reference (hb_map_t *map); + +HB_EXTERN void +hb_map_destroy (hb_map_t *map); + +HB_EXTERN hb_bool_t +hb_map_set_user_data (hb_map_t *map, + hb_user_data_key_t *key, + void * data, + hb_destroy_func_t destroy, + hb_bool_t replace); + +HB_EXTERN void * +hb_map_get_user_data (const hb_map_t *map, + hb_user_data_key_t *key); + + +/* Returns false if allocation has failed before */ +HB_EXTERN hb_bool_t +hb_map_allocation_successful (const hb_map_t *map); + +HB_EXTERN hb_map_t * +hb_map_copy (const hb_map_t *map); + +HB_EXTERN void +hb_map_clear (hb_map_t *map); + +HB_EXTERN hb_bool_t +hb_map_is_empty (const hb_map_t *map); + +HB_EXTERN unsigned int +hb_map_get_population (const hb_map_t *map); + +HB_EXTERN hb_bool_t +hb_map_is_equal (const hb_map_t *map, + const hb_map_t *other); + +HB_EXTERN unsigned int +hb_map_hash (const hb_map_t *map); + +HB_EXTERN void +hb_map_set (hb_map_t *map, + hb_codepoint_t key, + hb_codepoint_t value); + +HB_EXTERN hb_codepoint_t +hb_map_get (const hb_map_t *map, + hb_codepoint_t key); + +HB_EXTERN void +hb_map_del (hb_map_t *map, + hb_codepoint_t key); + +HB_EXTERN hb_bool_t +hb_map_has (const hb_map_t *map, + hb_codepoint_t key); + +HB_EXTERN void +hb_map_update (hb_map_t *map, + const hb_map_t *other); + +/* Pass -1 in for idx to get started. */ +HB_EXTERN hb_bool_t +hb_map_next (const hb_map_t *map, + int *idx, + hb_codepoint_t *key, + hb_codepoint_t *value); + +HB_EXTERN void +hb_map_keys (const hb_map_t *map, + hb_set_t *keys); + +HB_EXTERN void +hb_map_values (const hb_map_t *map, + hb_set_t *values); + +HB_END_DECLS + +#endif /* HB_MAP_H */ diff --git a/dependencies/winx64/include/harfbuzz/hb-ot-color.h b/dependencies/winx64/include/harfbuzz/hb-ot-color.h new file mode 100644 index 0000000..22ee497 --- /dev/null +++ b/dependencies/winx64/include/harfbuzz/hb-ot-color.h @@ -0,0 +1,155 @@ +/* + * Copyright © 2016 Google, Inc. + * Copyright © 2018 Khaled Hosny + * Copyright © 2018 Ebrahim Byagowi + * + * This is part of HarfBuzz, a text shaping library. + * + * Permission is hereby granted, without written agreement and without + * license or royalty fees, to use, copy, modify, and distribute this + * software and its documentation for any purpose, provided that the + * above copyright notice and the following two paragraphs appear in + * all copies of this software. + * + * IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE TO ANY PARTY FOR + * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES + * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN + * IF THE COPYRIGHT HOLDER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + * THE COPYRIGHT HOLDER SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, + * BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND + * FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS + * ON AN "AS IS" BASIS, AND THE COPYRIGHT HOLDER HAS NO OBLIGATION TO + * PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. + * + * Google Author(s): Sascha Brawer, Behdad Esfahbod + */ + +#if !defined(HB_OT_H_IN) && !defined(HB_NO_SINGLE_HEADER_ERROR) +#error "Include instead." +#endif + +#ifndef HB_OT_COLOR_H +#define HB_OT_COLOR_H + +#include "hb.h" +#include "hb-ot-name.h" + +HB_BEGIN_DECLS + + +/* + * Color palettes. + */ + +HB_EXTERN hb_bool_t +hb_ot_color_has_palettes (hb_face_t *face); + +HB_EXTERN unsigned int +hb_ot_color_palette_get_count (hb_face_t *face); + +HB_EXTERN hb_ot_name_id_t +hb_ot_color_palette_get_name_id (hb_face_t *face, + unsigned int palette_index); + +HB_EXTERN hb_ot_name_id_t +hb_ot_color_palette_color_get_name_id (hb_face_t *face, + unsigned int color_index); + +/** + * hb_ot_color_palette_flags_t: + * @HB_OT_COLOR_PALETTE_FLAG_DEFAULT: Default indicating that there is nothing special + * to note about a color palette. + * @HB_OT_COLOR_PALETTE_FLAG_USABLE_WITH_LIGHT_BACKGROUND: Flag indicating that the color + * palette is appropriate to use when displaying the font on a light background such as white. + * @HB_OT_COLOR_PALETTE_FLAG_USABLE_WITH_DARK_BACKGROUND: Flag indicating that the color + * palette is appropriate to use when displaying the font on a dark background such as black. + * + * Flags that describe the properties of color palette. + * + * Since: 2.1.0 + */ +typedef enum { /*< flags >*/ + HB_OT_COLOR_PALETTE_FLAG_DEFAULT = 0x00000000u, + HB_OT_COLOR_PALETTE_FLAG_USABLE_WITH_LIGHT_BACKGROUND = 0x00000001u, + HB_OT_COLOR_PALETTE_FLAG_USABLE_WITH_DARK_BACKGROUND = 0x00000002u +} hb_ot_color_palette_flags_t; + +HB_EXTERN hb_ot_color_palette_flags_t +hb_ot_color_palette_get_flags (hb_face_t *face, + unsigned int palette_index); + +HB_EXTERN unsigned int +hb_ot_color_palette_get_colors (hb_face_t *face, + unsigned int palette_index, + unsigned int start_offset, + unsigned int *color_count, /* IN/OUT. May be NULL. */ + hb_color_t *colors /* OUT. May be NULL. */); + + +/* + * Color layers. + */ + +HB_EXTERN hb_bool_t +hb_ot_color_has_layers (hb_face_t *face); + +/** + * hb_ot_color_layer_t: + * @glyph: the glyph ID of the layer + * @color_index: the palette color index of the layer + * + * Pairs of glyph and color index. + * + * A color index of 0xFFFF does not refer to a palette + * color, but indicates that the foreground color should + * be used. + * + * Since: 2.1.0 + **/ +typedef struct hb_ot_color_layer_t { + hb_codepoint_t glyph; + unsigned int color_index; +} hb_ot_color_layer_t; + +HB_EXTERN unsigned int +hb_ot_color_glyph_get_layers (hb_face_t *face, + hb_codepoint_t glyph, + unsigned int start_offset, + unsigned int *layer_count, /* IN/OUT. May be NULL. */ + hb_ot_color_layer_t *layers /* OUT. May be NULL. */); + +/* COLRv1 */ + +HB_EXTERN hb_bool_t +hb_ot_color_has_paint (hb_face_t *face); + +HB_EXTERN hb_bool_t +hb_ot_color_glyph_has_paint (hb_face_t *face, + hb_codepoint_t glyph); + +/* + * SVG + */ + +HB_EXTERN hb_bool_t +hb_ot_color_has_svg (hb_face_t *face); + +HB_EXTERN hb_blob_t * +hb_ot_color_glyph_reference_svg (hb_face_t *face, hb_codepoint_t glyph); + +/* + * PNG: CBDT or sbix + */ + +HB_EXTERN hb_bool_t +hb_ot_color_has_png (hb_face_t *face); + +HB_EXTERN hb_blob_t * +hb_ot_color_glyph_reference_png (hb_font_t *font, hb_codepoint_t glyph); + + +HB_END_DECLS + +#endif /* HB_OT_COLOR_H */ diff --git a/dependencies/winx64/include/harfbuzz/hb-ot-deprecated.h b/dependencies/winx64/include/harfbuzz/hb-ot-deprecated.h new file mode 100644 index 0000000..60672ab --- /dev/null +++ b/dependencies/winx64/include/harfbuzz/hb-ot-deprecated.h @@ -0,0 +1,147 @@ +/* + * Copyright © 2018 Google, Inc. + * + * This is part of HarfBuzz, a text shaping library. + * + * Permission is hereby granted, without written agreement and without + * license or royalty fees, to use, copy, modify, and distribute this + * software and its documentation for any purpose, provided that the + * above copyright notice and the following two paragraphs appear in + * all copies of this software. + * + * IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE TO ANY PARTY FOR + * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES + * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN + * IF THE COPYRIGHT HOLDER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + * THE COPYRIGHT HOLDER SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, + * BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND + * FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS + * ON AN "AS IS" BASIS, AND THE COPYRIGHT HOLDER HAS NO OBLIGATION TO + * PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. + * + * Google Author(s): Behdad Esfahbod + */ + +#if !defined(HB_OT_H_IN) && !defined(HB_NO_SINGLE_HEADER_ERROR) +#error "Include instead." +#endif + +#ifndef HB_OT_DEPRECATED_H +#define HB_OT_DEPRECATED_H + +#include "hb.h" +#include "hb-ot-name.h" + + +HB_BEGIN_DECLS + +#ifndef HB_DISABLE_DEPRECATED + + +/* https://github.com/harfbuzz/harfbuzz/issues/1734 */ +/** + * HB_MATH_GLYPH_PART_FLAG_EXTENDER: + * + * Use #HB_OT_MATH_GLYPH_PART_FLAG_EXTENDER instead. + * + * Deprecated: 2.5.1 + */ +#define HB_MATH_GLYPH_PART_FLAG_EXTENDER HB_OT_MATH_GLYPH_PART_FLAG_EXTENDER + +/* https://github.com/harfbuzz/harfbuzz/pull/3417 */ +/** + * HB_OT_MATH_SCRIPT: + * + * Use #HB_SCRIPT_MATH or #HB_OT_TAG_MATH_SCRIPT instead. + * + * Previous versions of this documentation recommended passing + * #HB_OT_MATH_SCRIPT to hb_buffer_set_script() to enable math shaping, but this + * usage is no longer supported. Use #HB_SCRIPT_MATH instead. + * + * Since: 1.3.3 + * Deprecated: 3.4.0 + */ +#define HB_OT_MATH_SCRIPT HB_OT_TAG_MATH_SCRIPT + + +/* Like hb_ot_layout_table_find_script, but takes zero-terminated array of scripts to test */ +HB_DEPRECATED_FOR (hb_ot_layout_table_select_script) +HB_EXTERN hb_bool_t +hb_ot_layout_table_choose_script (hb_face_t *face, + hb_tag_t table_tag, + const hb_tag_t *script_tags, + unsigned int *script_index, + hb_tag_t *chosen_script); + +HB_DEPRECATED_FOR (hb_ot_layout_script_select_language) +HB_EXTERN hb_bool_t +hb_ot_layout_script_find_language (hb_face_t *face, + hb_tag_t table_tag, + unsigned int script_index, + hb_tag_t language_tag, + unsigned int *language_index); + +HB_DEPRECATED_FOR (hb_ot_tags_from_script_and_language) +HB_EXTERN void +hb_ot_tags_from_script (hb_script_t script, + hb_tag_t *script_tag_1, + hb_tag_t *script_tag_2); + +HB_DEPRECATED_FOR (hb_ot_tags_from_script_and_language) +HB_EXTERN hb_tag_t +hb_ot_tag_from_language (hb_language_t language); + + +/** + * HB_OT_VAR_NO_AXIS_INDEX: + * + * Do not use. + * + * Since: 1.4.2 + * Deprecated: 2.2.0 + */ +#define HB_OT_VAR_NO_AXIS_INDEX 0xFFFFFFFFu + +/** + * hb_ot_var_axis_t: + * @tag: axis tag + * @name_id: axis name identifier + * @min_value: minimum value of the axis + * @default_value: default value of the axis + * @max_value: maximum value of the axis + * + * Use #hb_ot_var_axis_info_t instead. + * + * Since: 1.4.2 + * Deprecated: 2.2.0 + */ +typedef struct hb_ot_var_axis_t { + hb_tag_t tag; + hb_ot_name_id_t name_id; + float min_value; + float default_value; + float max_value; +} hb_ot_var_axis_t; + +HB_DEPRECATED_FOR (hb_ot_var_get_axis_infos) +HB_EXTERN unsigned int +hb_ot_var_get_axes (hb_face_t *face, + unsigned int start_offset, + unsigned int *axes_count /* IN/OUT */, + hb_ot_var_axis_t *axes_array /* OUT */); + +HB_DEPRECATED_FOR (hb_ot_var_find_axis_info) +HB_EXTERN hb_bool_t +hb_ot_var_find_axis (hb_face_t *face, + hb_tag_t axis_tag, + unsigned int *axis_index, + hb_ot_var_axis_t *axis_info); + + +#endif + +HB_END_DECLS + +#endif /* HB_OT_DEPRECATED_H */ diff --git a/dependencies/winx64/include/harfbuzz/hb-ot-font.h b/dependencies/winx64/include/harfbuzz/hb-ot-font.h new file mode 100644 index 0000000..e7959d1 --- /dev/null +++ b/dependencies/winx64/include/harfbuzz/hb-ot-font.h @@ -0,0 +1,45 @@ +/* + * Copyright © 2014 Google, Inc. + * + * This is part of HarfBuzz, a text shaping library. + * + * Permission is hereby granted, without written agreement and without + * license or royalty fees, to use, copy, modify, and distribute this + * software and its documentation for any purpose, provided that the + * above copyright notice and the following two paragraphs appear in + * all copies of this software. + * + * IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE TO ANY PARTY FOR + * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES + * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN + * IF THE COPYRIGHT HOLDER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + * THE COPYRIGHT HOLDER SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, + * BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND + * FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS + * ON AN "AS IS" BASIS, AND THE COPYRIGHT HOLDER HAS NO OBLIGATION TO + * PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. + * + * Google Author(s): Behdad Esfahbod, Roozbeh Pournader + */ + +#if !defined(HB_OT_H_IN) && !defined(HB_NO_SINGLE_HEADER_ERROR) +#error "Include instead." +#endif + +#ifndef HB_OT_FONT_H +#define HB_OT_FONT_H + +#include "hb.h" + +HB_BEGIN_DECLS + + +HB_EXTERN void +hb_ot_font_set_funcs (hb_font_t *font); + + +HB_END_DECLS + +#endif /* HB_OT_FONT_H */ diff --git a/dependencies/winx64/include/harfbuzz/hb-ot-layout.h b/dependencies/winx64/include/harfbuzz/hb-ot-layout.h new file mode 100644 index 0000000..386b98d --- /dev/null +++ b/dependencies/winx64/include/harfbuzz/hb-ot-layout.h @@ -0,0 +1,549 @@ +/* + * Copyright © 2007,2008,2009 Red Hat, Inc. + * + * This is part of HarfBuzz, a text shaping library. + * + * Permission is hereby granted, without written agreement and without + * license or royalty fees, to use, copy, modify, and distribute this + * software and its documentation for any purpose, provided that the + * above copyright notice and the following two paragraphs appear in + * all copies of this software. + * + * IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE TO ANY PARTY FOR + * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES + * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN + * IF THE COPYRIGHT HOLDER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + * THE COPYRIGHT HOLDER SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, + * BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND + * FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS + * ON AN "AS IS" BASIS, AND THE COPYRIGHT HOLDER HAS NO OBLIGATION TO + * PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. + * + * Red Hat Author(s): Behdad Esfahbod + */ + +#if !defined(HB_OT_H_IN) && !defined(HB_NO_SINGLE_HEADER_ERROR) +#error "Include instead." +#endif + +#ifndef HB_OT_LAYOUT_H +#define HB_OT_LAYOUT_H + +#include "hb.h" + +#include "hb-ot-name.h" + +HB_BEGIN_DECLS + + +/** + * HB_OT_TAG_BASE: + * + * OpenType [Baseline Table](https://docs.microsoft.com/en-us/typography/opentype/spec/base). + */ +#define HB_OT_TAG_BASE HB_TAG('B','A','S','E') +/** + * HB_OT_TAG_GDEF: + * + * OpenType [Glyph Definition Table](https://docs.microsoft.com/en-us/typography/opentype/spec/gdef). + */ +#define HB_OT_TAG_GDEF HB_TAG('G','D','E','F') +/** + * HB_OT_TAG_GSUB: + * + * OpenType [Glyph Substitution Table](https://docs.microsoft.com/en-us/typography/opentype/spec/gsub). + */ +#define HB_OT_TAG_GSUB HB_TAG('G','S','U','B') +/** + * HB_OT_TAG_GPOS: + * + * OpenType [Glyph Positioning Table](https://docs.microsoft.com/en-us/typography/opentype/spec/gpos). + */ +#define HB_OT_TAG_GPOS HB_TAG('G','P','O','S') +/** + * HB_OT_TAG_JSTF: + * + * OpenType [Justification Table](https://docs.microsoft.com/en-us/typography/opentype/spec/jstf). + */ +#define HB_OT_TAG_JSTF HB_TAG('J','S','T','F') + + +/* + * Script & Language tags. + */ + +/** + * HB_OT_TAG_DEFAULT_SCRIPT: + * + * OpenType script tag, `DFLT`, for features that are not script-specific. + * + */ +#define HB_OT_TAG_DEFAULT_SCRIPT HB_TAG ('D', 'F', 'L', 'T') +/** + * HB_OT_TAG_DEFAULT_LANGUAGE: + * + * OpenType language tag, `dflt`. Not a valid language tag, but some fonts + * mistakenly use it. + */ +#define HB_OT_TAG_DEFAULT_LANGUAGE HB_TAG ('d', 'f', 'l', 't') + +/** + * HB_OT_MAX_TAGS_PER_SCRIPT: + * + * Maximum number of OpenType tags that can correspond to a give #hb_script_t. + * + * Since: 2.0.0 + **/ +#define HB_OT_MAX_TAGS_PER_SCRIPT 3u +/** + * HB_OT_MAX_TAGS_PER_LANGUAGE: + * + * Maximum number of OpenType tags that can correspond to a give #hb_language_t. + * + * Since: 2.0.0 + **/ +#define HB_OT_MAX_TAGS_PER_LANGUAGE 3u + +HB_EXTERN void +hb_ot_tags_from_script_and_language (hb_script_t script, + hb_language_t language, + unsigned int *script_count /* IN/OUT */, + hb_tag_t *script_tags /* OUT */, + unsigned int *language_count /* IN/OUT */, + hb_tag_t *language_tags /* OUT */); + +HB_EXTERN hb_script_t +hb_ot_tag_to_script (hb_tag_t tag); + +HB_EXTERN hb_language_t +hb_ot_tag_to_language (hb_tag_t tag); + +HB_EXTERN void +hb_ot_tags_to_script_and_language (hb_tag_t script_tag, + hb_tag_t language_tag, + hb_script_t *script /* OUT */, + hb_language_t *language /* OUT */); + + +/* + * GDEF + */ + +HB_EXTERN hb_bool_t +hb_ot_layout_has_glyph_classes (hb_face_t *face); + +/** + * hb_ot_layout_glyph_class_t: + * @HB_OT_LAYOUT_GLYPH_CLASS_UNCLASSIFIED: Glyphs not matching the other classifications + * @HB_OT_LAYOUT_GLYPH_CLASS_BASE_GLYPH: Spacing, single characters, capable of accepting marks + * @HB_OT_LAYOUT_GLYPH_CLASS_LIGATURE: Glyphs that represent ligation of multiple characters + * @HB_OT_LAYOUT_GLYPH_CLASS_MARK: Non-spacing, combining glyphs that represent marks + * @HB_OT_LAYOUT_GLYPH_CLASS_COMPONENT: Spacing glyphs that represent part of a single character + * + * The GDEF classes defined for glyphs. + * + **/ +typedef enum { + HB_OT_LAYOUT_GLYPH_CLASS_UNCLASSIFIED = 0, + HB_OT_LAYOUT_GLYPH_CLASS_BASE_GLYPH = 1, + HB_OT_LAYOUT_GLYPH_CLASS_LIGATURE = 2, + HB_OT_LAYOUT_GLYPH_CLASS_MARK = 3, + HB_OT_LAYOUT_GLYPH_CLASS_COMPONENT = 4 +} hb_ot_layout_glyph_class_t; + +HB_EXTERN hb_ot_layout_glyph_class_t +hb_ot_layout_get_glyph_class (hb_face_t *face, + hb_codepoint_t glyph); + +HB_EXTERN void +hb_ot_layout_get_glyphs_in_class (hb_face_t *face, + hb_ot_layout_glyph_class_t klass, + hb_set_t *glyphs /* OUT */); + +/* Not that useful. Provides list of attach points for a glyph that a + * client may want to cache */ +HB_EXTERN unsigned int +hb_ot_layout_get_attach_points (hb_face_t *face, + hb_codepoint_t glyph, + unsigned int start_offset, + unsigned int *point_count /* IN/OUT */, + unsigned int *point_array /* OUT */); + +/* Ligature caret positions */ +HB_EXTERN unsigned int +hb_ot_layout_get_ligature_carets (hb_font_t *font, + hb_direction_t direction, + hb_codepoint_t glyph, + unsigned int start_offset, + unsigned int *caret_count /* IN/OUT */, + hb_position_t *caret_array /* OUT */); + + +/* + * GSUB/GPOS feature query and enumeration interface + */ + +/** + * HB_OT_LAYOUT_NO_SCRIPT_INDEX: + * + * Special value for script index indicating unsupported script. + */ +#define HB_OT_LAYOUT_NO_SCRIPT_INDEX 0xFFFFu +/** + * HB_OT_LAYOUT_NO_FEATURE_INDEX: + * + * Special value for feature index indicating unsupported feature. + */ +#define HB_OT_LAYOUT_NO_FEATURE_INDEX 0xFFFFu +/** + * HB_OT_LAYOUT_DEFAULT_LANGUAGE_INDEX: + * + * Special value for language index indicating default or unsupported language. + */ +#define HB_OT_LAYOUT_DEFAULT_LANGUAGE_INDEX 0xFFFFu +/** + * HB_OT_LAYOUT_NO_VARIATIONS_INDEX: + * + * Special value for variations index indicating unsupported variation. + */ +#define HB_OT_LAYOUT_NO_VARIATIONS_INDEX 0xFFFFFFFFu + +HB_EXTERN unsigned int +hb_ot_layout_table_get_script_tags (hb_face_t *face, + hb_tag_t table_tag, + unsigned int start_offset, + unsigned int *script_count /* IN/OUT */, + hb_tag_t *script_tags /* OUT */); + +HB_EXTERN hb_bool_t +hb_ot_layout_table_find_script (hb_face_t *face, + hb_tag_t table_tag, + hb_tag_t script_tag, + unsigned int *script_index /* OUT */); + +HB_EXTERN hb_bool_t +hb_ot_layout_table_select_script (hb_face_t *face, + hb_tag_t table_tag, + unsigned int script_count, + const hb_tag_t *script_tags, + unsigned int *script_index /* OUT */, + hb_tag_t *chosen_script /* OUT */); + +HB_EXTERN unsigned int +hb_ot_layout_table_get_feature_tags (hb_face_t *face, + hb_tag_t table_tag, + unsigned int start_offset, + unsigned int *feature_count /* IN/OUT */, + hb_tag_t *feature_tags /* OUT */); + +HB_EXTERN unsigned int +hb_ot_layout_script_get_language_tags (hb_face_t *face, + hb_tag_t table_tag, + unsigned int script_index, + unsigned int start_offset, + unsigned int *language_count /* IN/OUT */, + hb_tag_t *language_tags /* OUT */); + +HB_EXTERN hb_bool_t +hb_ot_layout_script_select_language (hb_face_t *face, + hb_tag_t table_tag, + unsigned int script_index, + unsigned int language_count, + const hb_tag_t *language_tags, + unsigned int *language_index /* OUT */); + +HB_EXTERN hb_bool_t +hb_ot_layout_script_select_language2 (hb_face_t *face, + hb_tag_t table_tag, + unsigned int script_index, + unsigned int language_count, + const hb_tag_t *language_tags, + unsigned int *language_index /* OUT */, + hb_tag_t *chosen_language /* OUT */); + +HB_EXTERN hb_bool_t +hb_ot_layout_language_get_required_feature_index (hb_face_t *face, + hb_tag_t table_tag, + unsigned int script_index, + unsigned int language_index, + unsigned int *feature_index /* OUT */); + +HB_EXTERN hb_bool_t +hb_ot_layout_language_get_required_feature (hb_face_t *face, + hb_tag_t table_tag, + unsigned int script_index, + unsigned int language_index, + unsigned int *feature_index /* OUT */, + hb_tag_t *feature_tag /* OUT */); + +HB_EXTERN unsigned int +hb_ot_layout_language_get_feature_indexes (hb_face_t *face, + hb_tag_t table_tag, + unsigned int script_index, + unsigned int language_index, + unsigned int start_offset, + unsigned int *feature_count /* IN/OUT */, + unsigned int *feature_indexes /* OUT */); + +HB_EXTERN unsigned int +hb_ot_layout_language_get_feature_tags (hb_face_t *face, + hb_tag_t table_tag, + unsigned int script_index, + unsigned int language_index, + unsigned int start_offset, + unsigned int *feature_count /* IN/OUT */, + hb_tag_t *feature_tags /* OUT */); + +HB_EXTERN hb_bool_t +hb_ot_layout_language_find_feature (hb_face_t *face, + hb_tag_t table_tag, + unsigned int script_index, + unsigned int language_index, + hb_tag_t feature_tag, + unsigned int *feature_index /* OUT */); + +HB_EXTERN unsigned int +hb_ot_layout_feature_get_lookups (hb_face_t *face, + hb_tag_t table_tag, + unsigned int feature_index, + unsigned int start_offset, + unsigned int *lookup_count /* IN/OUT */, + unsigned int *lookup_indexes /* OUT */); + +HB_EXTERN unsigned int +hb_ot_layout_table_get_lookup_count (hb_face_t *face, + hb_tag_t table_tag); + +HB_EXTERN void +hb_ot_layout_collect_features (hb_face_t *face, + hb_tag_t table_tag, + const hb_tag_t *scripts, + const hb_tag_t *languages, + const hb_tag_t *features, + hb_set_t *feature_indexes /* OUT */); + +HB_EXTERN void +hb_ot_layout_collect_features_map (hb_face_t *face, + hb_tag_t table_tag, + unsigned script_index, + unsigned language_index, + hb_map_t *feature_map /* OUT */); + +HB_EXTERN void +hb_ot_layout_collect_lookups (hb_face_t *face, + hb_tag_t table_tag, + const hb_tag_t *scripts, + const hb_tag_t *languages, + const hb_tag_t *features, + hb_set_t *lookup_indexes /* OUT */); + +HB_EXTERN void +hb_ot_layout_lookup_collect_glyphs (hb_face_t *face, + hb_tag_t table_tag, + unsigned int lookup_index, + hb_set_t *glyphs_before, /* OUT. May be NULL */ + hb_set_t *glyphs_input, /* OUT. May be NULL */ + hb_set_t *glyphs_after, /* OUT. May be NULL */ + hb_set_t *glyphs_output /* OUT. May be NULL */); + + +/* Variations support */ + +HB_EXTERN hb_bool_t +hb_ot_layout_table_find_feature_variations (hb_face_t *face, + hb_tag_t table_tag, + const int *coords, + unsigned int num_coords, + unsigned int *variations_index /* out */); + +HB_EXTERN unsigned int +hb_ot_layout_feature_with_variations_get_lookups (hb_face_t *face, + hb_tag_t table_tag, + unsigned int feature_index, + unsigned int variations_index, + unsigned int start_offset, + unsigned int *lookup_count /* IN/OUT */, + unsigned int *lookup_indexes /* OUT */); + + +/* + * GSUB + */ + +HB_EXTERN hb_bool_t +hb_ot_layout_has_substitution (hb_face_t *face); + +HB_EXTERN unsigned +hb_ot_layout_lookup_get_glyph_alternates (hb_face_t *face, + unsigned lookup_index, + hb_codepoint_t glyph, + unsigned start_offset, + unsigned *alternate_count /* IN/OUT */, + hb_codepoint_t *alternate_glyphs /* OUT */); + +HB_EXTERN hb_bool_t +hb_ot_layout_lookup_would_substitute (hb_face_t *face, + unsigned int lookup_index, + const hb_codepoint_t *glyphs, + unsigned int glyphs_length, + hb_bool_t zero_context); + +HB_EXTERN void +hb_ot_layout_lookup_substitute_closure (hb_face_t *face, + unsigned int lookup_index, + hb_set_t *glyphs + /*TODO , hb_bool_t inclusive */); + +HB_EXTERN void +hb_ot_layout_lookups_substitute_closure (hb_face_t *face, + const hb_set_t *lookups, + hb_set_t *glyphs); + + +/* + * GPOS + */ + +HB_EXTERN hb_bool_t +hb_ot_layout_has_positioning (hb_face_t *face); + +/* Optical 'size' feature info. Returns true if found. + * https://docs.microsoft.com/en-us/typography/opentype/spec/features_pt#size */ +HB_EXTERN hb_bool_t +hb_ot_layout_get_size_params (hb_face_t *face, + unsigned int *design_size, /* OUT. May be NULL */ + unsigned int *subfamily_id, /* OUT. May be NULL */ + hb_ot_name_id_t *subfamily_name_id, /* OUT. May be NULL */ + unsigned int *range_start, /* OUT. May be NULL */ + unsigned int *range_end /* OUT. May be NULL */); + +HB_EXTERN hb_position_t +hb_ot_layout_lookup_get_optical_bound (hb_font_t *font, + unsigned lookup_index, + hb_direction_t direction, + hb_codepoint_t glyph); + + +/* + * GSUB/GPOS + */ + +HB_EXTERN hb_bool_t +hb_ot_layout_feature_get_name_ids (hb_face_t *face, + hb_tag_t table_tag, + unsigned int feature_index, + hb_ot_name_id_t *label_id /* OUT. May be NULL */, + hb_ot_name_id_t *tooltip_id /* OUT. May be NULL */, + hb_ot_name_id_t *sample_id /* OUT. May be NULL */, + unsigned int *num_named_parameters /* OUT. May be NULL */, + hb_ot_name_id_t *first_param_id /* OUT. May be NULL */); + + +HB_EXTERN unsigned int +hb_ot_layout_feature_get_characters (hb_face_t *face, + hb_tag_t table_tag, + unsigned int feature_index, + unsigned int start_offset, + unsigned int *char_count /* IN/OUT. May be NULL */, + hb_codepoint_t *characters /* OUT. May be NULL */); + + +/* + * BASE + */ + +HB_EXTERN hb_bool_t +hb_ot_layout_get_font_extents (hb_font_t *font, + hb_direction_t direction, + hb_tag_t script_tag, + hb_tag_t language_tag, + hb_font_extents_t *extents); + +HB_EXTERN hb_bool_t +hb_ot_layout_get_font_extents2 (hb_font_t *font, + hb_direction_t direction, + hb_script_t script, + hb_language_t language, + hb_font_extents_t *extents); + +/** + * hb_ot_layout_baseline_tag_t: + * @HB_OT_LAYOUT_BASELINE_TAG_ROMAN: The baseline used by alphabetic scripts such as Latin, Cyrillic and Greek. + * In vertical writing mode, the alphabetic baseline for characters rotated 90 degrees clockwise. + * (This would not apply to alphabetic characters that remain upright in vertical writing mode, since these + * characters are not rotated.) + * @HB_OT_LAYOUT_BASELINE_TAG_HANGING: The hanging baseline. In horizontal direction, this is the horizontal + * line from which syllables seem, to hang in Tibetan and other similar scripts. In vertical writing mode, + * for Tibetan (or some other similar script) characters rotated 90 degrees clockwise. + * @HB_OT_LAYOUT_BASELINE_TAG_IDEO_FACE_BOTTOM_OR_LEFT: Ideographic character face bottom or left edge, + * if the direction is horizontal or vertical, respectively. + * @HB_OT_LAYOUT_BASELINE_TAG_IDEO_FACE_TOP_OR_RIGHT: Ideographic character face top or right edge, + * if the direction is horizontal or vertical, respectively. + * @HB_OT_LAYOUT_BASELINE_TAG_IDEO_FACE_CENTRAL: The center of the ideographic character face. Since: 4.0.0 + * @HB_OT_LAYOUT_BASELINE_TAG_IDEO_EMBOX_BOTTOM_OR_LEFT: Ideographic em-box bottom or left edge, + * if the direction is horizontal or vertical, respectively. + * @HB_OT_LAYOUT_BASELINE_TAG_IDEO_EMBOX_TOP_OR_RIGHT: Ideographic em-box top or right edge baseline, + * @HB_OT_LAYOUT_BASELINE_TAG_IDEO_EMBOX_CENTRAL: The center of the ideographic em-box. Since: 4.0.0 + * if the direction is horizontal or vertical, respectively. + * @HB_OT_LAYOUT_BASELINE_TAG_MATH: The baseline about which mathematical characters are centered. + * In vertical writing mode when mathematical characters rotated 90 degrees clockwise, are centered. + * + * Baseline tags from [Baseline Tags](https://docs.microsoft.com/en-us/typography/opentype/spec/baselinetags) registry. + * + * Since: 2.6.0 + */ +typedef enum { + HB_OT_LAYOUT_BASELINE_TAG_ROMAN = HB_TAG ('r','o','m','n'), + HB_OT_LAYOUT_BASELINE_TAG_HANGING = HB_TAG ('h','a','n','g'), + HB_OT_LAYOUT_BASELINE_TAG_IDEO_FACE_BOTTOM_OR_LEFT = HB_TAG ('i','c','f','b'), + HB_OT_LAYOUT_BASELINE_TAG_IDEO_FACE_TOP_OR_RIGHT = HB_TAG ('i','c','f','t'), + HB_OT_LAYOUT_BASELINE_TAG_IDEO_FACE_CENTRAL = HB_TAG ('I','c','f','c'), + HB_OT_LAYOUT_BASELINE_TAG_IDEO_EMBOX_BOTTOM_OR_LEFT = HB_TAG ('i','d','e','o'), + HB_OT_LAYOUT_BASELINE_TAG_IDEO_EMBOX_TOP_OR_RIGHT = HB_TAG ('i','d','t','p'), + HB_OT_LAYOUT_BASELINE_TAG_IDEO_EMBOX_CENTRAL = HB_TAG ('I','d','c','e'), + HB_OT_LAYOUT_BASELINE_TAG_MATH = HB_TAG ('m','a','t','h'), + + /*< private >*/ + _HB_OT_LAYOUT_BASELINE_TAG_MAX_VALUE = HB_TAG_MAX_SIGNED /*< skip >*/ +} hb_ot_layout_baseline_tag_t; + +HB_EXTERN hb_ot_layout_baseline_tag_t +hb_ot_layout_get_horizontal_baseline_tag_for_script (hb_script_t script); + +HB_EXTERN hb_bool_t +hb_ot_layout_get_baseline (hb_font_t *font, + hb_ot_layout_baseline_tag_t baseline_tag, + hb_direction_t direction, + hb_tag_t script_tag, + hb_tag_t language_tag, + hb_position_t *coord /* OUT. May be NULL. */); + +HB_EXTERN hb_bool_t +hb_ot_layout_get_baseline2 (hb_font_t *font, + hb_ot_layout_baseline_tag_t baseline_tag, + hb_direction_t direction, + hb_script_t script, + hb_language_t language, + hb_position_t *coord /* OUT. May be NULL. */); + +HB_EXTERN void +hb_ot_layout_get_baseline_with_fallback (hb_font_t *font, + hb_ot_layout_baseline_tag_t baseline_tag, + hb_direction_t direction, + hb_tag_t script_tag, + hb_tag_t language_tag, + hb_position_t *coord /* OUT */); + +HB_EXTERN void +hb_ot_layout_get_baseline_with_fallback2 (hb_font_t *font, + hb_ot_layout_baseline_tag_t baseline_tag, + hb_direction_t direction, + hb_script_t script, + hb_language_t language, + hb_position_t *coord /* OUT */); + +HB_END_DECLS + +#endif /* HB_OT_LAYOUT_H */ diff --git a/dependencies/winx64/include/harfbuzz/hb-ot-math.h b/dependencies/winx64/include/harfbuzz/hb-ot-math.h new file mode 100644 index 0000000..1378a06 --- /dev/null +++ b/dependencies/winx64/include/harfbuzz/hb-ot-math.h @@ -0,0 +1,333 @@ +/* + * Copyright © 2016 Igalia S.L. + * + * This is part of HarfBuzz, a text shaping library. + * + * Permission is hereby granted, without written agreement and without + * license or royalty fees, to use, copy, modify, and distribute this + * software and its documentation for any purpose, provided that the + * above copyright notice and the following two paragraphs appear in + * all copies of this software. + * + * IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE TO ANY PARTY FOR + * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES + * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN + * IF THE COPYRIGHT HOLDER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + * THE COPYRIGHT HOLDER SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, + * BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND + * FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS + * ON AN "AS IS" BASIS, AND THE COPYRIGHT HOLDER HAS NO OBLIGATION TO + * PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. + * + * Igalia Author(s): Frédéric Wang + */ + +#if !defined(HB_OT_H_IN) && !defined(HB_NO_SINGLE_HEADER_ERROR) +#error "Include instead." +#endif + +#ifndef HB_OT_MATH_H +#define HB_OT_MATH_H + +#include "hb.h" + +HB_BEGIN_DECLS + + +/* + * MATH + */ + +/** + * HB_OT_TAG_MATH: + * + * OpenType [Mathematical Typesetting Table](https://docs.microsoft.com/en-us/typography/opentype/spec/math). + * + * Since: 1.3.3 + */ +#define HB_OT_TAG_MATH HB_TAG('M','A','T','H') + +/** + * HB_OT_TAG_MATH_SCRIPT: + * + * OpenType script tag, `math`, for features specific to math shaping. + * + * #HB_OT_TAG_MATH_SCRIPT is not a valid #hb_script_t and should only be + * used with functions that accept raw OpenType script tags, such as + * #hb_ot_layout_collect_features. In other cases, #HB_SCRIPT_MATH should be + * used instead. + * + * Since: 3.4.0 + */ +#define HB_OT_TAG_MATH_SCRIPT HB_TAG('m','a','t','h') + +/* Types */ + +/** + * hb_ot_math_constant_t: + * @HB_OT_MATH_CONSTANT_SCRIPT_PERCENT_SCALE_DOWN: scriptPercentScaleDown + * @HB_OT_MATH_CONSTANT_SCRIPT_SCRIPT_PERCENT_SCALE_DOWN: scriptScriptPercentScaleDown + * @HB_OT_MATH_CONSTANT_DELIMITED_SUB_FORMULA_MIN_HEIGHT: delimitedSubFormulaMinHeight + * @HB_OT_MATH_CONSTANT_DISPLAY_OPERATOR_MIN_HEIGHT: displayOperatorMinHeight + * @HB_OT_MATH_CONSTANT_MATH_LEADING: mathLeading + * @HB_OT_MATH_CONSTANT_AXIS_HEIGHT: axisHeight + * @HB_OT_MATH_CONSTANT_ACCENT_BASE_HEIGHT: accentBaseHeight + * @HB_OT_MATH_CONSTANT_FLATTENED_ACCENT_BASE_HEIGHT: flattenedAccentBaseHeight + * @HB_OT_MATH_CONSTANT_SUBSCRIPT_SHIFT_DOWN: subscriptShiftDown + * @HB_OT_MATH_CONSTANT_SUBSCRIPT_TOP_MAX: subscriptTopMax + * @HB_OT_MATH_CONSTANT_SUBSCRIPT_BASELINE_DROP_MIN: subscriptBaselineDropMin + * @HB_OT_MATH_CONSTANT_SUPERSCRIPT_SHIFT_UP: superscriptShiftUp + * @HB_OT_MATH_CONSTANT_SUPERSCRIPT_SHIFT_UP_CRAMPED: superscriptShiftUpCramped + * @HB_OT_MATH_CONSTANT_SUPERSCRIPT_BOTTOM_MIN: superscriptBottomMin + * @HB_OT_MATH_CONSTANT_SUPERSCRIPT_BASELINE_DROP_MAX: superscriptBaselineDropMax + * @HB_OT_MATH_CONSTANT_SUB_SUPERSCRIPT_GAP_MIN: subSuperscriptGapMin + * @HB_OT_MATH_CONSTANT_SUPERSCRIPT_BOTTOM_MAX_WITH_SUBSCRIPT: superscriptBottomMaxWithSubscript + * @HB_OT_MATH_CONSTANT_SPACE_AFTER_SCRIPT: spaceAfterScript + * @HB_OT_MATH_CONSTANT_UPPER_LIMIT_GAP_MIN: upperLimitGapMin + * @HB_OT_MATH_CONSTANT_UPPER_LIMIT_BASELINE_RISE_MIN: upperLimitBaselineRiseMin + * @HB_OT_MATH_CONSTANT_LOWER_LIMIT_GAP_MIN: lowerLimitGapMin + * @HB_OT_MATH_CONSTANT_LOWER_LIMIT_BASELINE_DROP_MIN: lowerLimitBaselineDropMin + * @HB_OT_MATH_CONSTANT_STACK_TOP_SHIFT_UP: stackTopShiftUp + * @HB_OT_MATH_CONSTANT_STACK_TOP_DISPLAY_STYLE_SHIFT_UP: stackTopDisplayStyleShiftUp + * @HB_OT_MATH_CONSTANT_STACK_BOTTOM_SHIFT_DOWN: stackBottomShiftDown + * @HB_OT_MATH_CONSTANT_STACK_BOTTOM_DISPLAY_STYLE_SHIFT_DOWN: stackBottomDisplayStyleShiftDown + * @HB_OT_MATH_CONSTANT_STACK_GAP_MIN: stackGapMin + * @HB_OT_MATH_CONSTANT_STACK_DISPLAY_STYLE_GAP_MIN: stackDisplayStyleGapMin + * @HB_OT_MATH_CONSTANT_STRETCH_STACK_TOP_SHIFT_UP: stretchStackTopShiftUp + * @HB_OT_MATH_CONSTANT_STRETCH_STACK_BOTTOM_SHIFT_DOWN: stretchStackBottomShiftDown + * @HB_OT_MATH_CONSTANT_STRETCH_STACK_GAP_ABOVE_MIN: stretchStackGapAboveMin + * @HB_OT_MATH_CONSTANT_STRETCH_STACK_GAP_BELOW_MIN: stretchStackGapBelowMin + * @HB_OT_MATH_CONSTANT_FRACTION_NUMERATOR_SHIFT_UP: fractionNumeratorShiftUp + * @HB_OT_MATH_CONSTANT_FRACTION_NUMERATOR_DISPLAY_STYLE_SHIFT_UP: fractionNumeratorDisplayStyleShiftUp + * @HB_OT_MATH_CONSTANT_FRACTION_DENOMINATOR_SHIFT_DOWN: fractionDenominatorShiftDown + * @HB_OT_MATH_CONSTANT_FRACTION_DENOMINATOR_DISPLAY_STYLE_SHIFT_DOWN: fractionDenominatorDisplayStyleShiftDown + * @HB_OT_MATH_CONSTANT_FRACTION_NUMERATOR_GAP_MIN: fractionNumeratorGapMin + * @HB_OT_MATH_CONSTANT_FRACTION_NUM_DISPLAY_STYLE_GAP_MIN: fractionNumDisplayStyleGapMin + * @HB_OT_MATH_CONSTANT_FRACTION_RULE_THICKNESS: fractionRuleThickness + * @HB_OT_MATH_CONSTANT_FRACTION_DENOMINATOR_GAP_MIN: fractionDenominatorGapMin + * @HB_OT_MATH_CONSTANT_FRACTION_DENOM_DISPLAY_STYLE_GAP_MIN: fractionDenomDisplayStyleGapMin + * @HB_OT_MATH_CONSTANT_SKEWED_FRACTION_HORIZONTAL_GAP: skewedFractionHorizontalGap + * @HB_OT_MATH_CONSTANT_SKEWED_FRACTION_VERTICAL_GAP: skewedFractionVerticalGap + * @HB_OT_MATH_CONSTANT_OVERBAR_VERTICAL_GAP: overbarVerticalGap + * @HB_OT_MATH_CONSTANT_OVERBAR_RULE_THICKNESS: overbarRuleThickness + * @HB_OT_MATH_CONSTANT_OVERBAR_EXTRA_ASCENDER: overbarExtraAscender + * @HB_OT_MATH_CONSTANT_UNDERBAR_VERTICAL_GAP: underbarVerticalGap + * @HB_OT_MATH_CONSTANT_UNDERBAR_RULE_THICKNESS: underbarRuleThickness + * @HB_OT_MATH_CONSTANT_UNDERBAR_EXTRA_DESCENDER: underbarExtraDescender + * @HB_OT_MATH_CONSTANT_RADICAL_VERTICAL_GAP: radicalVerticalGap + * @HB_OT_MATH_CONSTANT_RADICAL_DISPLAY_STYLE_VERTICAL_GAP: radicalDisplayStyleVerticalGap + * @HB_OT_MATH_CONSTANT_RADICAL_RULE_THICKNESS: radicalRuleThickness + * @HB_OT_MATH_CONSTANT_RADICAL_EXTRA_ASCENDER: radicalExtraAscender + * @HB_OT_MATH_CONSTANT_RADICAL_KERN_BEFORE_DEGREE: radicalKernBeforeDegree + * @HB_OT_MATH_CONSTANT_RADICAL_KERN_AFTER_DEGREE: radicalKernAfterDegree + * @HB_OT_MATH_CONSTANT_RADICAL_DEGREE_BOTTOM_RAISE_PERCENT: radicalDegreeBottomRaisePercent + * + * The 'MATH' table constants, refer to + * [OpenType documentation](https://docs.microsoft.com/en-us/typography/opentype/spec/math#mathconstants-table) + * For more explanations. + * + * Since: 1.3.3 + */ +typedef enum { + HB_OT_MATH_CONSTANT_SCRIPT_PERCENT_SCALE_DOWN = 0, + HB_OT_MATH_CONSTANT_SCRIPT_SCRIPT_PERCENT_SCALE_DOWN = 1, + HB_OT_MATH_CONSTANT_DELIMITED_SUB_FORMULA_MIN_HEIGHT = 2, + HB_OT_MATH_CONSTANT_DISPLAY_OPERATOR_MIN_HEIGHT = 3, + HB_OT_MATH_CONSTANT_MATH_LEADING = 4, + HB_OT_MATH_CONSTANT_AXIS_HEIGHT = 5, + HB_OT_MATH_CONSTANT_ACCENT_BASE_HEIGHT = 6, + HB_OT_MATH_CONSTANT_FLATTENED_ACCENT_BASE_HEIGHT = 7, + HB_OT_MATH_CONSTANT_SUBSCRIPT_SHIFT_DOWN = 8, + HB_OT_MATH_CONSTANT_SUBSCRIPT_TOP_MAX = 9, + HB_OT_MATH_CONSTANT_SUBSCRIPT_BASELINE_DROP_MIN = 10, + HB_OT_MATH_CONSTANT_SUPERSCRIPT_SHIFT_UP = 11, + HB_OT_MATH_CONSTANT_SUPERSCRIPT_SHIFT_UP_CRAMPED = 12, + HB_OT_MATH_CONSTANT_SUPERSCRIPT_BOTTOM_MIN = 13, + HB_OT_MATH_CONSTANT_SUPERSCRIPT_BASELINE_DROP_MAX = 14, + HB_OT_MATH_CONSTANT_SUB_SUPERSCRIPT_GAP_MIN = 15, + HB_OT_MATH_CONSTANT_SUPERSCRIPT_BOTTOM_MAX_WITH_SUBSCRIPT = 16, + HB_OT_MATH_CONSTANT_SPACE_AFTER_SCRIPT = 17, + HB_OT_MATH_CONSTANT_UPPER_LIMIT_GAP_MIN = 18, + HB_OT_MATH_CONSTANT_UPPER_LIMIT_BASELINE_RISE_MIN = 19, + HB_OT_MATH_CONSTANT_LOWER_LIMIT_GAP_MIN = 20, + HB_OT_MATH_CONSTANT_LOWER_LIMIT_BASELINE_DROP_MIN = 21, + HB_OT_MATH_CONSTANT_STACK_TOP_SHIFT_UP = 22, + HB_OT_MATH_CONSTANT_STACK_TOP_DISPLAY_STYLE_SHIFT_UP = 23, + HB_OT_MATH_CONSTANT_STACK_BOTTOM_SHIFT_DOWN = 24, + HB_OT_MATH_CONSTANT_STACK_BOTTOM_DISPLAY_STYLE_SHIFT_DOWN = 25, + HB_OT_MATH_CONSTANT_STACK_GAP_MIN = 26, + HB_OT_MATH_CONSTANT_STACK_DISPLAY_STYLE_GAP_MIN = 27, + HB_OT_MATH_CONSTANT_STRETCH_STACK_TOP_SHIFT_UP = 28, + HB_OT_MATH_CONSTANT_STRETCH_STACK_BOTTOM_SHIFT_DOWN = 29, + HB_OT_MATH_CONSTANT_STRETCH_STACK_GAP_ABOVE_MIN = 30, + HB_OT_MATH_CONSTANT_STRETCH_STACK_GAP_BELOW_MIN = 31, + HB_OT_MATH_CONSTANT_FRACTION_NUMERATOR_SHIFT_UP = 32, + HB_OT_MATH_CONSTANT_FRACTION_NUMERATOR_DISPLAY_STYLE_SHIFT_UP = 33, + HB_OT_MATH_CONSTANT_FRACTION_DENOMINATOR_SHIFT_DOWN = 34, + HB_OT_MATH_CONSTANT_FRACTION_DENOMINATOR_DISPLAY_STYLE_SHIFT_DOWN = 35, + HB_OT_MATH_CONSTANT_FRACTION_NUMERATOR_GAP_MIN = 36, + HB_OT_MATH_CONSTANT_FRACTION_NUM_DISPLAY_STYLE_GAP_MIN = 37, + HB_OT_MATH_CONSTANT_FRACTION_RULE_THICKNESS = 38, + HB_OT_MATH_CONSTANT_FRACTION_DENOMINATOR_GAP_MIN = 39, + HB_OT_MATH_CONSTANT_FRACTION_DENOM_DISPLAY_STYLE_GAP_MIN = 40, + HB_OT_MATH_CONSTANT_SKEWED_FRACTION_HORIZONTAL_GAP = 41, + HB_OT_MATH_CONSTANT_SKEWED_FRACTION_VERTICAL_GAP = 42, + HB_OT_MATH_CONSTANT_OVERBAR_VERTICAL_GAP = 43, + HB_OT_MATH_CONSTANT_OVERBAR_RULE_THICKNESS = 44, + HB_OT_MATH_CONSTANT_OVERBAR_EXTRA_ASCENDER = 45, + HB_OT_MATH_CONSTANT_UNDERBAR_VERTICAL_GAP = 46, + HB_OT_MATH_CONSTANT_UNDERBAR_RULE_THICKNESS = 47, + HB_OT_MATH_CONSTANT_UNDERBAR_EXTRA_DESCENDER = 48, + HB_OT_MATH_CONSTANT_RADICAL_VERTICAL_GAP = 49, + HB_OT_MATH_CONSTANT_RADICAL_DISPLAY_STYLE_VERTICAL_GAP = 50, + HB_OT_MATH_CONSTANT_RADICAL_RULE_THICKNESS = 51, + HB_OT_MATH_CONSTANT_RADICAL_EXTRA_ASCENDER = 52, + HB_OT_MATH_CONSTANT_RADICAL_KERN_BEFORE_DEGREE = 53, + HB_OT_MATH_CONSTANT_RADICAL_KERN_AFTER_DEGREE = 54, + HB_OT_MATH_CONSTANT_RADICAL_DEGREE_BOTTOM_RAISE_PERCENT = 55 +} hb_ot_math_constant_t; + +/** + * hb_ot_math_kern_t: + * @HB_OT_MATH_KERN_TOP_RIGHT: The top right corner of the glyph. + * @HB_OT_MATH_KERN_TOP_LEFT: The top left corner of the glyph. + * @HB_OT_MATH_KERN_BOTTOM_RIGHT: The bottom right corner of the glyph. + * @HB_OT_MATH_KERN_BOTTOM_LEFT: The bottom left corner of the glyph. + * + * The math kerning-table types defined for the four corners + * of a glyph. + * + * Since: 1.3.3 + */ +typedef enum { + HB_OT_MATH_KERN_TOP_RIGHT = 0, + HB_OT_MATH_KERN_TOP_LEFT = 1, + HB_OT_MATH_KERN_BOTTOM_RIGHT = 2, + HB_OT_MATH_KERN_BOTTOM_LEFT = 3 +} hb_ot_math_kern_t; + +/** + * hb_ot_math_kern_entry_t: + * @max_correction_height: The maximum height at which this entry should be used + * @kern_value: The kern value of the entry + * + * Data type to hold math kerning (cut-in) information for a glyph. + * + * Since: 3.4.0 + */ +typedef struct { + hb_position_t max_correction_height; + hb_position_t kern_value; +} hb_ot_math_kern_entry_t; + +/** + * hb_ot_math_glyph_variant_t: + * @glyph: The glyph index of the variant + * @advance: The advance width of the variant + * + * Data type to hold math-variant information for a glyph. + * + * Since: 1.3.3 + */ +typedef struct hb_ot_math_glyph_variant_t { + hb_codepoint_t glyph; + hb_position_t advance; +} hb_ot_math_glyph_variant_t; + +/** + * hb_ot_math_glyph_part_flags_t: + * @HB_OT_MATH_GLYPH_PART_FLAG_EXTENDER: This is an extender glyph part that + * can be repeated to reach the desired length. + * + * Flags for math glyph parts. + * + * Since: 1.3.3 + */ +typedef enum { /*< flags >*/ + HB_OT_MATH_GLYPH_PART_FLAG_EXTENDER = 0x00000001u /* Extender glyph */ +} hb_ot_math_glyph_part_flags_t; + +/** + * hb_ot_math_glyph_part_t: + * @glyph: The glyph index of the variant part + * @start_connector_length: The length of the connector on the starting side of the variant part + * @end_connector_length: The length of the connector on the ending side of the variant part + * @full_advance: The total advance of the part + * @flags: #hb_ot_math_glyph_part_flags_t flags for the part + * + * Data type to hold information for a "part" component of a math-variant glyph. + * Large variants for stretchable math glyphs (such as parentheses) can be constructed + * on the fly from parts. + * + * Since: 1.3.3 + */ +typedef struct hb_ot_math_glyph_part_t { + hb_codepoint_t glyph; + hb_position_t start_connector_length; + hb_position_t end_connector_length; + hb_position_t full_advance; + hb_ot_math_glyph_part_flags_t flags; +} hb_ot_math_glyph_part_t; + +/* Methods */ + +HB_EXTERN hb_bool_t +hb_ot_math_has_data (hb_face_t *face); + +HB_EXTERN hb_position_t +hb_ot_math_get_constant (hb_font_t *font, + hb_ot_math_constant_t constant); + +HB_EXTERN hb_position_t +hb_ot_math_get_glyph_italics_correction (hb_font_t *font, + hb_codepoint_t glyph); + +HB_EXTERN hb_position_t +hb_ot_math_get_glyph_top_accent_attachment (hb_font_t *font, + hb_codepoint_t glyph); + +HB_EXTERN hb_bool_t +hb_ot_math_is_glyph_extended_shape (hb_face_t *face, + hb_codepoint_t glyph); + +HB_EXTERN hb_position_t +hb_ot_math_get_glyph_kerning (hb_font_t *font, + hb_codepoint_t glyph, + hb_ot_math_kern_t kern, + hb_position_t correction_height); + +HB_EXTERN unsigned int +hb_ot_math_get_glyph_kernings (hb_font_t *font, + hb_codepoint_t glyph, + hb_ot_math_kern_t kern, + unsigned int start_offset, + unsigned int *entries_count, /* IN/OUT */ + hb_ot_math_kern_entry_t *kern_entries /* OUT */); + +HB_EXTERN unsigned int +hb_ot_math_get_glyph_variants (hb_font_t *font, + hb_codepoint_t glyph, + hb_direction_t direction, + unsigned int start_offset, + unsigned int *variants_count, /* IN/OUT */ + hb_ot_math_glyph_variant_t *variants /* OUT */); + +HB_EXTERN hb_position_t +hb_ot_math_get_min_connector_overlap (hb_font_t *font, + hb_direction_t direction); + +HB_EXTERN unsigned int +hb_ot_math_get_glyph_assembly (hb_font_t *font, + hb_codepoint_t glyph, + hb_direction_t direction, + unsigned int start_offset, + unsigned int *parts_count, /* IN/OUT */ + hb_ot_math_glyph_part_t *parts, /* OUT */ + hb_position_t *italics_correction /* OUT */); + + +HB_END_DECLS + +#endif /* HB_OT_MATH_H */ diff --git a/dependencies/winx64/include/harfbuzz/hb-ot-meta.h b/dependencies/winx64/include/harfbuzz/hb-ot-meta.h new file mode 100644 index 0000000..7748eb4 --- /dev/null +++ b/dependencies/winx64/include/harfbuzz/hb-ot-meta.h @@ -0,0 +1,72 @@ +/* + * Copyright © 2019 Ebrahim Byagowi + * + * This is part of HarfBuzz, a text shaping library. + * + * Permission is hereby granted, without written agreement and without + * license or royalty fees, to use, copy, modify, and distribute this + * software and its documentation for any purpose, provided that the + * above copyright notice and the following two paragraphs appear in + * all copies of this software. + * + * IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE TO ANY PARTY FOR + * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES + * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN + * IF THE COPYRIGHT HOLDER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + * THE COPYRIGHT HOLDER SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, + * BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND + * FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS + * ON AN "AS IS" BASIS, AND THE COPYRIGHT HOLDER HAS NO OBLIGATION TO + * PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. + */ + +#if !defined(HB_OT_H_IN) && !defined(HB_NO_SINGLE_HEADER_ERROR) +#error "Include instead." +#endif + +#ifndef HB_OT_META_H +#define HB_OT_META_H + +#include "hb.h" + +HB_BEGIN_DECLS + +/** + * hb_ot_meta_tag_t: + * @HB_OT_META_TAG_DESIGN_LANGUAGES: Design languages. Text, using only + * Basic Latin (ASCII) characters. Indicates languages and/or scripts + * for the user audiences that the font was primarily designed for. + * @HB_OT_META_TAG_SUPPORTED_LANGUAGES: Supported languages. Text, using + * only Basic Latin (ASCII) characters. Indicates languages and/or scripts + * that the font is declared to be capable of supporting. + * + * Known metadata tags from https://docs.microsoft.com/en-us/typography/opentype/spec/meta + * + * Since: 2.6.0 + **/ +typedef enum { +/* + HB_OT_META_TAG_APPL = HB_TAG ('a','p','p','l'), + HB_OT_META_TAG_BILD = HB_TAG ('b','i','l','d'), +*/ + HB_OT_META_TAG_DESIGN_LANGUAGES = HB_TAG ('d','l','n','g'), + HB_OT_META_TAG_SUPPORTED_LANGUAGES = HB_TAG ('s','l','n','g'), + + /*< private >*/ + _HB_OT_META_TAG_MAX_VALUE = HB_TAG_MAX_SIGNED /*< skip >*/ +} hb_ot_meta_tag_t; + +HB_EXTERN unsigned int +hb_ot_meta_get_entry_tags (hb_face_t *face, + unsigned int start_offset, + unsigned int *entries_count, /* IN/OUT. May be NULL. */ + hb_ot_meta_tag_t *entries /* OUT. May be NULL. */); + +HB_EXTERN hb_blob_t * +hb_ot_meta_reference_entry (hb_face_t *face, hb_ot_meta_tag_t meta_tag); + +HB_END_DECLS + +#endif /* HB_OT_META_H */ diff --git a/dependencies/winx64/include/harfbuzz/hb-ot-metrics.h b/dependencies/winx64/include/harfbuzz/hb-ot-metrics.h new file mode 100644 index 0000000..30de500 --- /dev/null +++ b/dependencies/winx64/include/harfbuzz/hb-ot-metrics.h @@ -0,0 +1,129 @@ +/* + * Copyright © 2018 Ebrahim Byagowi + * + * This is part of HarfBuzz, a text shaping library. + * + * Permission is hereby granted, without written agreement and without + * license or royalty fees, to use, copy, modify, and distribute this + * software and its documentation for any purpose, provided that the + * above copyright notice and the following two paragraphs appear in + * all copies of this software. + * + * IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE TO ANY PARTY FOR + * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES + * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN + * IF THE COPYRIGHT HOLDER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + * THE COPYRIGHT HOLDER SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, + * BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND + * FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS + * ON AN "AS IS" BASIS, AND THE COPYRIGHT HOLDER HAS NO OBLIGATION TO + * PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. + */ + +#if !defined(HB_OT_H_IN) && !defined(HB_NO_SINGLE_HEADER_ERROR) +#error "Include instead." +#endif + +#ifndef HB_OT_METRICS_H +#define HB_OT_METRICS_H + +#include "hb.h" +#include "hb-ot-name.h" + +HB_BEGIN_DECLS + + +/** + * hb_ot_metrics_tag_t: + * @HB_OT_METRICS_TAG_HORIZONTAL_ASCENDER: horizontal ascender. + * @HB_OT_METRICS_TAG_HORIZONTAL_DESCENDER: horizontal descender. + * @HB_OT_METRICS_TAG_HORIZONTAL_LINE_GAP: horizontal line gap. + * @HB_OT_METRICS_TAG_HORIZONTAL_CLIPPING_ASCENT: horizontal clipping ascent. + * @HB_OT_METRICS_TAG_HORIZONTAL_CLIPPING_DESCENT: horizontal clipping descent. + * @HB_OT_METRICS_TAG_VERTICAL_ASCENDER: vertical ascender. + * @HB_OT_METRICS_TAG_VERTICAL_DESCENDER: vertical descender. + * @HB_OT_METRICS_TAG_VERTICAL_LINE_GAP: vertical line gap. + * @HB_OT_METRICS_TAG_HORIZONTAL_CARET_RISE: horizontal caret rise. + * @HB_OT_METRICS_TAG_HORIZONTAL_CARET_RUN: horizontal caret run. + * @HB_OT_METRICS_TAG_HORIZONTAL_CARET_OFFSET: horizontal caret offset. + * @HB_OT_METRICS_TAG_VERTICAL_CARET_RISE: vertical caret rise. + * @HB_OT_METRICS_TAG_VERTICAL_CARET_RUN: vertical caret run. + * @HB_OT_METRICS_TAG_VERTICAL_CARET_OFFSET: vertical caret offset. + * @HB_OT_METRICS_TAG_X_HEIGHT: x height. + * @HB_OT_METRICS_TAG_CAP_HEIGHT: cap height. + * @HB_OT_METRICS_TAG_SUBSCRIPT_EM_X_SIZE: subscript em x size. + * @HB_OT_METRICS_TAG_SUBSCRIPT_EM_Y_SIZE: subscript em y size. + * @HB_OT_METRICS_TAG_SUBSCRIPT_EM_X_OFFSET: subscript em x offset. + * @HB_OT_METRICS_TAG_SUBSCRIPT_EM_Y_OFFSET: subscript em y offset. + * @HB_OT_METRICS_TAG_SUPERSCRIPT_EM_X_SIZE: superscript em x size. + * @HB_OT_METRICS_TAG_SUPERSCRIPT_EM_Y_SIZE: superscript em y size. + * @HB_OT_METRICS_TAG_SUPERSCRIPT_EM_X_OFFSET: superscript em x offset. + * @HB_OT_METRICS_TAG_SUPERSCRIPT_EM_Y_OFFSET: superscript em y offset. + * @HB_OT_METRICS_TAG_STRIKEOUT_SIZE: strikeout size. + * @HB_OT_METRICS_TAG_STRIKEOUT_OFFSET: strikeout offset. + * @HB_OT_METRICS_TAG_UNDERLINE_SIZE: underline size. + * @HB_OT_METRICS_TAG_UNDERLINE_OFFSET: underline offset. + * + * Metric tags corresponding to [MVAR Value + * Tags](https://docs.microsoft.com/en-us/typography/opentype/spec/mvar#value-tags) + * + * Since: 2.6.0 + **/ +typedef enum { + HB_OT_METRICS_TAG_HORIZONTAL_ASCENDER = HB_TAG ('h','a','s','c'), + HB_OT_METRICS_TAG_HORIZONTAL_DESCENDER = HB_TAG ('h','d','s','c'), + HB_OT_METRICS_TAG_HORIZONTAL_LINE_GAP = HB_TAG ('h','l','g','p'), + HB_OT_METRICS_TAG_HORIZONTAL_CLIPPING_ASCENT = HB_TAG ('h','c','l','a'), + HB_OT_METRICS_TAG_HORIZONTAL_CLIPPING_DESCENT = HB_TAG ('h','c','l','d'), + HB_OT_METRICS_TAG_VERTICAL_ASCENDER = HB_TAG ('v','a','s','c'), + HB_OT_METRICS_TAG_VERTICAL_DESCENDER = HB_TAG ('v','d','s','c'), + HB_OT_METRICS_TAG_VERTICAL_LINE_GAP = HB_TAG ('v','l','g','p'), + HB_OT_METRICS_TAG_HORIZONTAL_CARET_RISE = HB_TAG ('h','c','r','s'), + HB_OT_METRICS_TAG_HORIZONTAL_CARET_RUN = HB_TAG ('h','c','r','n'), + HB_OT_METRICS_TAG_HORIZONTAL_CARET_OFFSET = HB_TAG ('h','c','o','f'), + HB_OT_METRICS_TAG_VERTICAL_CARET_RISE = HB_TAG ('v','c','r','s'), + HB_OT_METRICS_TAG_VERTICAL_CARET_RUN = HB_TAG ('v','c','r','n'), + HB_OT_METRICS_TAG_VERTICAL_CARET_OFFSET = HB_TAG ('v','c','o','f'), + HB_OT_METRICS_TAG_X_HEIGHT = HB_TAG ('x','h','g','t'), + HB_OT_METRICS_TAG_CAP_HEIGHT = HB_TAG ('c','p','h','t'), + HB_OT_METRICS_TAG_SUBSCRIPT_EM_X_SIZE = HB_TAG ('s','b','x','s'), + HB_OT_METRICS_TAG_SUBSCRIPT_EM_Y_SIZE = HB_TAG ('s','b','y','s'), + HB_OT_METRICS_TAG_SUBSCRIPT_EM_X_OFFSET = HB_TAG ('s','b','x','o'), + HB_OT_METRICS_TAG_SUBSCRIPT_EM_Y_OFFSET = HB_TAG ('s','b','y','o'), + HB_OT_METRICS_TAG_SUPERSCRIPT_EM_X_SIZE = HB_TAG ('s','p','x','s'), + HB_OT_METRICS_TAG_SUPERSCRIPT_EM_Y_SIZE = HB_TAG ('s','p','y','s'), + HB_OT_METRICS_TAG_SUPERSCRIPT_EM_X_OFFSET = HB_TAG ('s','p','x','o'), + HB_OT_METRICS_TAG_SUPERSCRIPT_EM_Y_OFFSET = HB_TAG ('s','p','y','o'), + HB_OT_METRICS_TAG_STRIKEOUT_SIZE = HB_TAG ('s','t','r','s'), + HB_OT_METRICS_TAG_STRIKEOUT_OFFSET = HB_TAG ('s','t','r','o'), + HB_OT_METRICS_TAG_UNDERLINE_SIZE = HB_TAG ('u','n','d','s'), + HB_OT_METRICS_TAG_UNDERLINE_OFFSET = HB_TAG ('u','n','d','o'), + + /*< private >*/ + _HB_OT_METRICS_TAG_MAX_VALUE = HB_TAG_MAX_SIGNED /*< skip >*/ +} hb_ot_metrics_tag_t; + +HB_EXTERN hb_bool_t +hb_ot_metrics_get_position (hb_font_t *font, + hb_ot_metrics_tag_t metrics_tag, + hb_position_t *position /* OUT. May be NULL. */); + +HB_EXTERN void +hb_ot_metrics_get_position_with_fallback (hb_font_t *font, + hb_ot_metrics_tag_t metrics_tag, + hb_position_t *position /* OUT */); + +HB_EXTERN float +hb_ot_metrics_get_variation (hb_font_t *font, hb_ot_metrics_tag_t metrics_tag); + +HB_EXTERN hb_position_t +hb_ot_metrics_get_x_variation (hb_font_t *font, hb_ot_metrics_tag_t metrics_tag); + +HB_EXTERN hb_position_t +hb_ot_metrics_get_y_variation (hb_font_t *font, hb_ot_metrics_tag_t metrics_tag); + +HB_END_DECLS + +#endif /* HB_OT_METRICS_H */ diff --git a/dependencies/winx64/include/harfbuzz/hb-ot-name.h b/dependencies/winx64/include/harfbuzz/hb-ot-name.h new file mode 100644 index 0000000..03e664b --- /dev/null +++ b/dependencies/winx64/include/harfbuzz/hb-ot-name.h @@ -0,0 +1,164 @@ +/* + * Copyright © 2018 Ebrahim Byagowi. + * + * This is part of HarfBuzz, a text shaping library. + * + * Permission is hereby granted, without written agreement and without + * license or royalty fees, to use, copy, modify, and distribute this + * software and its documentation for any purpose, provided that the + * above copyright notice and the following two paragraphs appear in + * all copies of this software. + * + * IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE TO ANY PARTY FOR + * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES + * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN + * IF THE COPYRIGHT HOLDER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + * THE COPYRIGHT HOLDER SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, + * BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND + * FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS + * ON AN "AS IS" BASIS, AND THE COPYRIGHT HOLDER HAS NO OBLIGATION TO + * PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. + */ + +#if !defined(HB_OT_H_IN) && !defined(HB_NO_SINGLE_HEADER_ERROR) +#error "Include instead." +#endif + +#ifndef HB_OT_NAME_H +#define HB_OT_NAME_H + +#include "hb.h" + +HB_BEGIN_DECLS + +/** + * hb_ot_name_id_predefined_t: + * @HB_OT_NAME_ID_COPYRIGHT: Copyright notice + * @HB_OT_NAME_ID_FONT_FAMILY: Font Family name + * @HB_OT_NAME_ID_FONT_SUBFAMILY: Font Subfamily name + * @HB_OT_NAME_ID_UNIQUE_ID: Unique font identifier + * @HB_OT_NAME_ID_FULL_NAME: Full font name that reflects + * all family and relevant subfamily descriptors + * @HB_OT_NAME_ID_VERSION_STRING: Version string + * @HB_OT_NAME_ID_POSTSCRIPT_NAME: PostScript name for the font + * @HB_OT_NAME_ID_TRADEMARK: Trademark + * @HB_OT_NAME_ID_MANUFACTURER: Manufacturer Name + * @HB_OT_NAME_ID_DESIGNER: Designer + * @HB_OT_NAME_ID_DESCRIPTION: Description + * @HB_OT_NAME_ID_VENDOR_URL: URL of font vendor + * @HB_OT_NAME_ID_DESIGNER_URL: URL of typeface designer + * @HB_OT_NAME_ID_LICENSE: License Description + * @HB_OT_NAME_ID_LICENSE_URL: URL where additional licensing + * information can be found + * @HB_OT_NAME_ID_TYPOGRAPHIC_FAMILY: Typographic Family name + * @HB_OT_NAME_ID_TYPOGRAPHIC_SUBFAMILY: Typographic Subfamily name + * @HB_OT_NAME_ID_MAC_FULL_NAME: Compatible Full Name for MacOS + * @HB_OT_NAME_ID_SAMPLE_TEXT: Sample text + * @HB_OT_NAME_ID_CID_FINDFONT_NAME: PostScript CID findfont name + * @HB_OT_NAME_ID_WWS_FAMILY: WWS Family Name + * @HB_OT_NAME_ID_WWS_SUBFAMILY: WWS Subfamily Name + * @HB_OT_NAME_ID_LIGHT_BACKGROUND: Light Background Palette + * @HB_OT_NAME_ID_DARK_BACKGROUND: Dark Background Palette + * @HB_OT_NAME_ID_VARIATIONS_PS_PREFIX: Variations PostScript Name Prefix + * @HB_OT_NAME_ID_INVALID: Value to represent a nonexistent name ID. + * + * An enum type representing the pre-defined name IDs. + * + * For more information on these fields, see the + * [OpenType spec](https://docs.microsoft.com/en-us/typography/opentype/spec/name#name-ids). + * + * Since: 7.0.0 + **/ +typedef enum +{ + HB_OT_NAME_ID_COPYRIGHT = 0, + HB_OT_NAME_ID_FONT_FAMILY = 1, + HB_OT_NAME_ID_FONT_SUBFAMILY = 2, + HB_OT_NAME_ID_UNIQUE_ID = 3, + HB_OT_NAME_ID_FULL_NAME = 4, + HB_OT_NAME_ID_VERSION_STRING = 5, + HB_OT_NAME_ID_POSTSCRIPT_NAME = 6, + HB_OT_NAME_ID_TRADEMARK = 7, + HB_OT_NAME_ID_MANUFACTURER = 8, + HB_OT_NAME_ID_DESIGNER = 9, + HB_OT_NAME_ID_DESCRIPTION = 10, + HB_OT_NAME_ID_VENDOR_URL = 11, + HB_OT_NAME_ID_DESIGNER_URL = 12, + HB_OT_NAME_ID_LICENSE = 13, + HB_OT_NAME_ID_LICENSE_URL = 14, +/*HB_OT_NAME_ID_RESERVED = 15,*/ + HB_OT_NAME_ID_TYPOGRAPHIC_FAMILY = 16, + HB_OT_NAME_ID_TYPOGRAPHIC_SUBFAMILY = 17, + HB_OT_NAME_ID_MAC_FULL_NAME = 18, + HB_OT_NAME_ID_SAMPLE_TEXT = 19, + HB_OT_NAME_ID_CID_FINDFONT_NAME = 20, + HB_OT_NAME_ID_WWS_FAMILY = 21, + HB_OT_NAME_ID_WWS_SUBFAMILY = 22, + HB_OT_NAME_ID_LIGHT_BACKGROUND = 23, + HB_OT_NAME_ID_DARK_BACKGROUND = 24, + HB_OT_NAME_ID_VARIATIONS_PS_PREFIX = 25, + + HB_OT_NAME_ID_INVALID = 0xFFFF +} hb_ot_name_id_predefined_t; + +/** + * hb_ot_name_id_t: + * + * An integral type representing an OpenType 'name' table name identifier. + * There are predefined name IDs, as well as name IDs return from other + * API. These can be used to fetch name strings from a font face. + * + * Since: 2.0.0 + **/ +typedef unsigned int hb_ot_name_id_t; + + +/** + * hb_ot_name_entry_t: + * @name_id: name ID + * @language: language + * + * Structure representing a name ID in a particular language. + * + * Since: 2.1.0 + **/ +typedef struct hb_ot_name_entry_t { + hb_ot_name_id_t name_id; + /*< private >*/ + hb_var_int_t var; + /*< public >*/ + hb_language_t language; +} hb_ot_name_entry_t; + +HB_EXTERN const hb_ot_name_entry_t * +hb_ot_name_list_names (hb_face_t *face, + unsigned int *num_entries /* OUT */); + + +HB_EXTERN unsigned int +hb_ot_name_get_utf8 (hb_face_t *face, + hb_ot_name_id_t name_id, + hb_language_t language, + unsigned int *text_size /* IN/OUT */, + char *text /* OUT */); + +HB_EXTERN unsigned int +hb_ot_name_get_utf16 (hb_face_t *face, + hb_ot_name_id_t name_id, + hb_language_t language, + unsigned int *text_size /* IN/OUT */, + uint16_t *text /* OUT */); + +HB_EXTERN unsigned int +hb_ot_name_get_utf32 (hb_face_t *face, + hb_ot_name_id_t name_id, + hb_language_t language, + unsigned int *text_size /* IN/OUT */, + uint32_t *text /* OUT */); + + +HB_END_DECLS + +#endif /* HB_OT_NAME_H */ diff --git a/dependencies/winx64/include/harfbuzz/hb-ot-shape.h b/dependencies/winx64/include/harfbuzz/hb-ot-shape.h new file mode 100644 index 0000000..80063f7 --- /dev/null +++ b/dependencies/winx64/include/harfbuzz/hb-ot-shape.h @@ -0,0 +1,59 @@ +/* + * Copyright © 2013 Red Hat, Inc. + * + * This is part of HarfBuzz, a text shaping library. + * + * Permission is hereby granted, without written agreement and without + * license or royalty fees, to use, copy, modify, and distribute this + * software and its documentation for any purpose, provided that the + * above copyright notice and the following two paragraphs appear in + * all copies of this software. + * + * IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE TO ANY PARTY FOR + * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES + * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN + * IF THE COPYRIGHT HOLDER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + * THE COPYRIGHT HOLDER SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, + * BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND + * FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS + * ON AN "AS IS" BASIS, AND THE COPYRIGHT HOLDER HAS NO OBLIGATION TO + * PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. + * + * Red Hat Author(s): Behdad Esfahbod + */ + +#if !defined(HB_OT_H_IN) && !defined(HB_NO_SINGLE_HEADER_ERROR) +#error "Include instead." +#endif + +#ifndef HB_OT_SHAPE_H +#define HB_OT_SHAPE_H + +#include "hb.h" + +HB_BEGIN_DECLS + +/* TODO port to shape-plan / set. */ +HB_EXTERN void +hb_ot_shape_glyphs_closure (hb_font_t *font, + hb_buffer_t *buffer, + const hb_feature_t *features, + unsigned int num_features, + hb_set_t *glyphs); + +HB_EXTERN void +hb_ot_shape_plan_collect_lookups (hb_shape_plan_t *shape_plan, + hb_tag_t table_tag, + hb_set_t *lookup_indexes /* OUT */); + +HB_EXTERN unsigned int +hb_ot_shape_plan_get_feature_tags (hb_shape_plan_t *shape_plan, + unsigned int start_offset, + unsigned int *tag_count, /* IN/OUT */ + hb_tag_t *tags /* OUT */); + +HB_END_DECLS + +#endif /* HB_OT_SHAPE_H */ diff --git a/dependencies/winx64/include/harfbuzz/hb-ot-var.h b/dependencies/winx64/include/harfbuzz/hb-ot-var.h new file mode 100644 index 0000000..05147cc --- /dev/null +++ b/dependencies/winx64/include/harfbuzz/hb-ot-var.h @@ -0,0 +1,191 @@ +/* + * Copyright © 2017 Google, Inc. + * + * This is part of HarfBuzz, a text shaping library. + * + * Permission is hereby granted, without written agreement and without + * license or royalty fees, to use, copy, modify, and distribute this + * software and its documentation for any purpose, provided that the + * above copyright notice and the following two paragraphs appear in + * all copies of this software. + * + * IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE TO ANY PARTY FOR + * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES + * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN + * IF THE COPYRIGHT HOLDER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + * THE COPYRIGHT HOLDER SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, + * BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND + * FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS + * ON AN "AS IS" BASIS, AND THE COPYRIGHT HOLDER HAS NO OBLIGATION TO + * PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. + * + * Red Hat Author(s): Behdad Esfahbod + */ + +#if !defined(HB_OT_H_IN) && !defined(HB_NO_SINGLE_HEADER_ERROR) +#error "Include instead." +#endif + +#ifndef HB_OT_VAR_H +#define HB_OT_VAR_H + +#include "hb.h" + +HB_BEGIN_DECLS + +/** + * HB_OT_TAG_VAR_AXIS_ITALIC: + * + * Registered tag for the roman/italic axis. + */ +#define HB_OT_TAG_VAR_AXIS_ITALIC HB_TAG('i','t','a','l') + +/** + * HB_OT_TAG_VAR_AXIS_OPTICAL_SIZE: + * + * Registered tag for the optical-size axis. + * Note: The optical-size axis supersedes the OpenType `size` feature. + */ +#define HB_OT_TAG_VAR_AXIS_OPTICAL_SIZE HB_TAG('o','p','s','z') + +/** + * HB_OT_TAG_VAR_AXIS_SLANT: + * + * Registered tag for the slant axis + */ +#define HB_OT_TAG_VAR_AXIS_SLANT HB_TAG('s','l','n','t') + +/** + * HB_OT_TAG_VAR_AXIS_WIDTH: + * + * Registered tag for the width axis. + */ +#define HB_OT_TAG_VAR_AXIS_WIDTH HB_TAG('w','d','t','h') + +/** + * HB_OT_TAG_VAR_AXIS_WEIGHT: + * + * Registered tag for the weight axis. + */ +#define HB_OT_TAG_VAR_AXIS_WEIGHT HB_TAG('w','g','h','t') + + +/* + * fvar / avar + */ + +HB_EXTERN hb_bool_t +hb_ot_var_has_data (hb_face_t *face); + + +/* + * Variation axes. + */ + + +HB_EXTERN unsigned int +hb_ot_var_get_axis_count (hb_face_t *face); + +/** + * hb_ot_var_axis_flags_t: + * @HB_OT_VAR_AXIS_FLAG_HIDDEN: The axis should not be exposed directly in user interfaces. + * + * Flags for #hb_ot_var_axis_info_t. + * + * Since: 2.2.0 + */ +typedef enum { /*< flags >*/ + HB_OT_VAR_AXIS_FLAG_HIDDEN = 0x00000001u, + + /*< private >*/ + _HB_OT_VAR_AXIS_FLAG_MAX_VALUE= HB_TAG_MAX_SIGNED /*< skip >*/ +} hb_ot_var_axis_flags_t; + +/** + * hb_ot_var_axis_info_t: + * @axis_index: Index of the axis in the variation-axis array + * @tag: The #hb_tag_t tag identifying the design variation of the axis + * @name_id: The `name` table Name ID that provides display names for the axis + * @flags: The #hb_ot_var_axis_flags_t flags for the axis + * @min_value: The minimum value on the variation axis that the font covers + * @default_value: The position on the variation axis corresponding to the font's defaults + * @max_value: The maximum value on the variation axis that the font covers + * + * Data type for holding variation-axis values. + * + * The minimum, default, and maximum values are in un-normalized, user scales. + * + * Note: at present, the only flag defined for @flags is + * #HB_OT_VAR_AXIS_FLAG_HIDDEN. + * + * Since: 2.2.0 + */ +typedef struct hb_ot_var_axis_info_t { + unsigned int axis_index; + hb_tag_t tag; + hb_ot_name_id_t name_id; + hb_ot_var_axis_flags_t flags; + float min_value; + float default_value; + float max_value; + /*< private >*/ + unsigned int reserved; +} hb_ot_var_axis_info_t; + +HB_EXTERN unsigned int +hb_ot_var_get_axis_infos (hb_face_t *face, + unsigned int start_offset, + unsigned int *axes_count /* IN/OUT */, + hb_ot_var_axis_info_t *axes_array /* OUT */); + +HB_EXTERN hb_bool_t +hb_ot_var_find_axis_info (hb_face_t *face, + hb_tag_t axis_tag, + hb_ot_var_axis_info_t *axis_info); + + +/* + * Named instances. + */ + +HB_EXTERN unsigned int +hb_ot_var_get_named_instance_count (hb_face_t *face); + +HB_EXTERN hb_ot_name_id_t +hb_ot_var_named_instance_get_subfamily_name_id (hb_face_t *face, + unsigned int instance_index); + +HB_EXTERN hb_ot_name_id_t +hb_ot_var_named_instance_get_postscript_name_id (hb_face_t *face, + unsigned int instance_index); + +HB_EXTERN unsigned int +hb_ot_var_named_instance_get_design_coords (hb_face_t *face, + unsigned int instance_index, + unsigned int *coords_length, /* IN/OUT */ + float *coords /* OUT */); + + +/* + * Conversions. + */ + +HB_EXTERN void +hb_ot_var_normalize_variations (hb_face_t *face, + const hb_variation_t *variations, /* IN */ + unsigned int variations_length, + int *coords, /* OUT */ + unsigned int coords_length); + +HB_EXTERN void +hb_ot_var_normalize_coords (hb_face_t *face, + unsigned int coords_length, + const float *design_coords, /* IN */ + int *normalized_coords /* OUT */); + + +HB_END_DECLS + +#endif /* HB_OT_VAR_H */ diff --git a/dependencies/winx64/include/harfbuzz/hb-ot.h b/dependencies/winx64/include/harfbuzz/hb-ot.h new file mode 100644 index 0000000..f2dbaa1 --- /dev/null +++ b/dependencies/winx64/include/harfbuzz/hb-ot.h @@ -0,0 +1,49 @@ +/* + * Copyright © 2009 Red Hat, Inc. + * + * This is part of HarfBuzz, a text shaping library. + * + * Permission is hereby granted, without written agreement and without + * license or royalty fees, to use, copy, modify, and distribute this + * software and its documentation for any purpose, provided that the + * above copyright notice and the following two paragraphs appear in + * all copies of this software. + * + * IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE TO ANY PARTY FOR + * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES + * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN + * IF THE COPYRIGHT HOLDER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + * THE COPYRIGHT HOLDER SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, + * BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND + * FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS + * ON AN "AS IS" BASIS, AND THE COPYRIGHT HOLDER HAS NO OBLIGATION TO + * PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. + * + * Red Hat Author(s): Behdad Esfahbod + */ + +#ifndef HB_OT_H +#define HB_OT_H +#define HB_OT_H_IN + +#include "hb.h" + +#include "hb-ot-color.h" +#include "hb-ot-deprecated.h" +#include "hb-ot-font.h" +#include "hb-ot-layout.h" +#include "hb-ot-math.h" +#include "hb-ot-meta.h" +#include "hb-ot-metrics.h" +#include "hb-ot-name.h" +#include "hb-ot-shape.h" +#include "hb-ot-var.h" + +HB_BEGIN_DECLS + +HB_END_DECLS + +#undef HB_OT_H_IN +#endif /* HB_OT_H */ diff --git a/dependencies/winx64/include/harfbuzz/hb-paint.h b/dependencies/winx64/include/harfbuzz/hb-paint.h new file mode 100644 index 0000000..3785077 --- /dev/null +++ b/dependencies/winx64/include/harfbuzz/hb-paint.h @@ -0,0 +1,1039 @@ +/* + * Copyright © 2022 Matthias Clasen + * + * This is part of HarfBuzz, a text shaping library. + * + * Permission is hereby granted, without written agreement and without + * license or royalty fees, to use, copy, modify, and distribute this + * software and its documentation for any purpose, provided that the + * above copyright notice and the following two paragraphs appear in + * all copies of this software. + * + * IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE TO ANY PARTY FOR + * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES + * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN + * IF THE COPYRIGHT HOLDER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + * THE COPYRIGHT HOLDER SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, + * BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND + * FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS + * ON AN "AS IS" BASIS, AND THE COPYRIGHT HOLDER HAS NO OBLIGATION TO + * PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. + */ + +#if !defined(HB_H_IN) && !defined(HB_NO_SINGLE_HEADER_ERROR) +#error "Include instead." +#endif + +#ifndef HB_PAINT_H +#define HB_PAINT_H + +#include "hb-common.h" + +HB_BEGIN_DECLS + + +/** + * hb_paint_funcs_t: + * + * Glyph paint callbacks. + * + * The callbacks assume that the caller maintains a stack + * of current transforms, clips and intermediate surfaces, + * as evidenced by the pairs of push/pop callbacks. The + * push/pop calls will be properly nested, so it is fine + * to store the different kinds of object on a single stack. + * + * Not all callbacks are required for all kinds of glyphs. + * For rendering COLRv0 or non-color outline glyphs, the + * gradient callbacks are not needed, and the composite + * callback only needs to handle simple alpha compositing + * (#HB_PAINT_COMPOSITE_MODE_SRC_OVER). + * + * The paint-image callback is only needed for glyphs + * with image blobs in the CBDT, sbix or SVG tables. + * + * The custom-palette-color callback is only necessary if + * you want to override colors from the font palette with + * custom colors. + * + * Since: 7.0.0 + **/ +typedef struct hb_paint_funcs_t hb_paint_funcs_t; + +HB_EXTERN hb_paint_funcs_t * +hb_paint_funcs_create (void); + +HB_EXTERN hb_paint_funcs_t * +hb_paint_funcs_get_empty (void); + +HB_EXTERN hb_paint_funcs_t * +hb_paint_funcs_reference (hb_paint_funcs_t *funcs); + +HB_EXTERN void +hb_paint_funcs_destroy (hb_paint_funcs_t *funcs); + +HB_EXTERN hb_bool_t +hb_paint_funcs_set_user_data (hb_paint_funcs_t *funcs, + hb_user_data_key_t *key, + void * data, + hb_destroy_func_t destroy, + hb_bool_t replace); + + +HB_EXTERN void * +hb_paint_funcs_get_user_data (const hb_paint_funcs_t *funcs, + hb_user_data_key_t *key); + +HB_EXTERN void +hb_paint_funcs_make_immutable (hb_paint_funcs_t *funcs); + +HB_EXTERN hb_bool_t +hb_paint_funcs_is_immutable (hb_paint_funcs_t *funcs); + +/** + * hb_paint_push_transform_func_t: + * @funcs: paint functions object + * @paint_data: The data accompanying the paint functions in hb_font_paint_glyph() + * @xx: xx component of the transform matrix + * @yx: yx component of the transform matrix + * @xy: xy component of the transform matrix + * @yy: yy component of the transform matrix + * @dx: dx component of the transform matrix + * @dy: dy component of the transform matrix + * @user_data: User data pointer passed to hb_paint_funcs_set_push_transform_func() + * + * A virtual method for the #hb_paint_funcs_t to apply + * a transform to subsequent paint calls. + * + * This transform is applied after the current transform, + * and remains in effect until a matching call to + * the #hb_paint_funcs_pop_transform_func_t vfunc. + * + * Since: 7.0.0 + */ +typedef void (*hb_paint_push_transform_func_t) (hb_paint_funcs_t *funcs, + void *paint_data, + float xx, float yx, + float xy, float yy, + float dx, float dy, + void *user_data); + +/** + * hb_paint_pop_transform_func_t: + * @funcs: paint functions object + * @paint_data: The data accompanying the paint functions in hb_font_paint_glyph() + * @user_data: User data pointer passed to hb_paint_funcs_set_pop_transform_func() + * + * A virtual method for the #hb_paint_funcs_t to undo + * the effect of a prior call to the #hb_paint_funcs_push_transform_func_t + * vfunc. + * + * Since: 7.0.0 + */ +typedef void (*hb_paint_pop_transform_func_t) (hb_paint_funcs_t *funcs, + void *paint_data, + void *user_data); + +/** + * hb_paint_color_glyph_func_t: + * @funcs: paint functions object + * @paint_data: The data accompanying the paint functions in hb_font_paint_glyph() + * @glyph: the glyph ID + * @font: the font + * @user_data: User data pointer passed to hb_paint_funcs_set_color_glyph_func() + * + * A virtual method for the #hb_paint_funcs_t to render a color glyph by glyph index. + * + * Return value: `true` if the glyph was painted, `false` otherwise. + * + * Since: 8.2.0 + */ +typedef hb_bool_t (*hb_paint_color_glyph_func_t) (hb_paint_funcs_t *funcs, + void *paint_data, + hb_codepoint_t glyph, + hb_font_t *font, + void *user_data); + +/** + * hb_paint_push_clip_glyph_func_t: + * @funcs: paint functions object + * @paint_data: The data accompanying the paint functions in hb_font_paint_glyph() + * @glyph: the glyph ID + * @font: the font + * @user_data: User data pointer passed to hb_paint_funcs_set_push_clip_glyph_func() + * + * A virtual method for the #hb_paint_funcs_t to clip + * subsequent paint calls to the outline of a glyph. + * + * The coordinates of the glyph outline are expected in the + * current @font scale (ie. the results of calling + * hb_font_draw_glyph() with @font). The outline is + * transformed by the current transform. + * + * This clip is applied in addition to the current clip, + * and remains in effect until a matching call to + * the #hb_paint_funcs_pop_clip_func_t vfunc. + * + * Since: 7.0.0 + */ +typedef void (*hb_paint_push_clip_glyph_func_t) (hb_paint_funcs_t *funcs, + void *paint_data, + hb_codepoint_t glyph, + hb_font_t *font, + void *user_data); + +/** + * hb_paint_push_clip_rectangle_func_t: + * @funcs: paint functions object + * @paint_data: The data accompanying the paint functions in hb_font_paint_glyph() + * @xmin: min X for the rectangle + * @ymin: min Y for the rectangle + * @xmax: max X for the rectangle + * @ymax: max Y for the rectangle + * @user_data: User data pointer passed to hb_paint_funcs_set_push_clip_rectangle_func() + * + * A virtual method for the #hb_paint_funcs_t to clip + * subsequent paint calls to a rectangle. + * + * The coordinates of the rectangle are interpreted according + * to the current transform. + * + * This clip is applied in addition to the current clip, + * and remains in effect until a matching call to + * the #hb_paint_funcs_pop_clip_func_t vfunc. + * + * Since: 7.0.0 + */ +typedef void (*hb_paint_push_clip_rectangle_func_t) (hb_paint_funcs_t *funcs, + void *paint_data, + float xmin, float ymin, + float xmax, float ymax, + void *user_data); + +/** + * hb_paint_pop_clip_func_t: + * @funcs: paint functions object + * @paint_data: The data accompanying the paint functions in hb_font_paint_glyph() + * @user_data: User data pointer passed to hb_paint_funcs_set_pop_clip_func() + * + * A virtual method for the #hb_paint_funcs_t to undo + * the effect of a prior call to the #hb_paint_funcs_push_clip_glyph_func_t + * or #hb_paint_funcs_push_clip_rectangle_func_t vfuncs. + * + * Since: 7.0.0 + */ +typedef void (*hb_paint_pop_clip_func_t) (hb_paint_funcs_t *funcs, + void *paint_data, + void *user_data); + +/** + * hb_paint_color_func_t: + * @funcs: paint functions object + * @paint_data: The data accompanying the paint functions in hb_font_paint_glyph() + * @is_foreground: whether the color is the foreground + * @color: The color to use, unpremultiplied + * @user_data: User data pointer passed to hb_paint_funcs_set_color_func() + * + * A virtual method for the #hb_paint_funcs_t to paint a + * color everywhere within the current clip. + * + * Since: 7.0.0 + */ +typedef void (*hb_paint_color_func_t) (hb_paint_funcs_t *funcs, + void *paint_data, + hb_bool_t is_foreground, + hb_color_t color, + void *user_data); + +/** + * HB_PAINT_IMAGE_FORMAT_PNG: + * + * Tag identifying PNG images in #hb_paint_image_func_t callbacks. + * + * Since: 7.0.0 + */ +#define HB_PAINT_IMAGE_FORMAT_PNG HB_TAG('p','n','g',' ') + +/** + * HB_PAINT_IMAGE_FORMAT_SVG: + * + * Tag identifying SVG images in #hb_paint_image_func_t callbacks. + * + * Since: 7.0.0 + */ +#define HB_PAINT_IMAGE_FORMAT_SVG HB_TAG('s','v','g',' ') + +/** + * HB_PAINT_IMAGE_FORMAT_BGRA: + * + * Tag identifying raw pixel-data images in #hb_paint_image_func_t callbacks. + * The data is in BGRA pre-multiplied sRGBA color-space format. + * + * Since: 7.0.0 + */ +#define HB_PAINT_IMAGE_FORMAT_BGRA HB_TAG('B','G','R','A') + +/** + * hb_paint_image_func_t: + * @funcs: paint functions object + * @paint_data: The data accompanying the paint functions in hb_font_paint_glyph() + * @image: the image data + * @width: width of the raster image in pixels, or 0 + * @height: height of the raster image in pixels, or 0 + * @format: the image format as a tag + * @slant: Deprecated. Always set to 0.0. + * @extents: (nullable): glyph extents for desired rendering + * @user_data: User data pointer passed to hb_paint_funcs_set_image_func() + * + * A virtual method for the #hb_paint_funcs_t to paint a glyph image. + * + * This method is called for glyphs with image blobs in the CBDT, + * sbix or SVG tables. The @format identifies the kind of data that + * is contained in @image. Possible values include #HB_PAINT_IMAGE_FORMAT_PNG, + * #HB_PAINT_IMAGE_FORMAT_SVG and #HB_PAINT_IMAGE_FORMAT_BGRA. + * + * The image dimensions and glyph extents are provided if available, + * and should be used to size and position the image. + * + * Return value: Whether the operation was successful. + * + * Since: 7.0.0 + */ +typedef hb_bool_t (*hb_paint_image_func_t) (hb_paint_funcs_t *funcs, + void *paint_data, + hb_blob_t *image, + unsigned int width, + unsigned int height, + hb_tag_t format, + float slant, + hb_glyph_extents_t *extents, + void *user_data); + +/** + * hb_color_stop_t: + * @offset: the offset of the color stop + * @is_foreground: whether the color is the foreground + * @color: the color, unpremultiplied + * + * Information about a color stop on a color line. + * + * Color lines typically have offsets ranging between 0 and 1, + * but that is not required. + * + * Note: despite @color being unpremultiplied here, interpolation in + * gradients shall happen in premultiplied space. See the OpenType spec + * [COLR](https://learn.microsoft.com/en-us/typography/opentype/spec/colr) + * section for details. + * + * Since: 7.0.0 + */ +typedef struct { + float offset; + hb_bool_t is_foreground; + hb_color_t color; +} hb_color_stop_t; + +/** + * hb_paint_extend_t: + * @HB_PAINT_EXTEND_PAD: Outside the defined interval, + * the color of the closest color stop is used. + * @HB_PAINT_EXTEND_REPEAT: The color line is repeated over + * repeated multiples of the defined interval + * @HB_PAINT_EXTEND_REFLECT: The color line is repeated over + * repeated intervals, as for the repeat mode. + * However, in each repeated interval, the ordering of + * color stops is the reverse of the adjacent interval. + * + * The values of this enumeration determine how color values + * outside the minimum and maximum defined offset on a #hb_color_line_t + * are determined. + * + * See the OpenType spec [COLR](https://learn.microsoft.com/en-us/typography/opentype/spec/colr) + * section for details. + * + * Since: 7.0.0 + */ +typedef enum { + HB_PAINT_EXTEND_PAD, + HB_PAINT_EXTEND_REPEAT, + HB_PAINT_EXTEND_REFLECT +} hb_paint_extend_t; + +typedef struct hb_color_line_t hb_color_line_t; + +/** + * hb_color_line_get_color_stops_func_t: + * @color_line: a #hb_color_line_t object + * @color_line_data: the data accompanying @color_line + * @start: the index of the first color stop to return + * @count: (inout) (optional): Input = the maximum number of feature tags to return; + * Output = the actual number of feature tags returned (may be zero) + * @color_stops: (out) (array length=count) (optional): Array of #hb_color_stop_t to populate + * @user_data: the data accompanying this method + * + * A virtual method for the #hb_color_line_t to fetch color stops. + * + * Return value: the total number of color stops in @color_line + * + * Since: 7.0.0 + */ +typedef unsigned int (*hb_color_line_get_color_stops_func_t) (hb_color_line_t *color_line, + void *color_line_data, + unsigned int start, + unsigned int *count, + hb_color_stop_t *color_stops, + void *user_data); + +/** + * hb_color_line_get_extend_func_t: + * @color_line: a #hb_color_line_t object + * @color_line_data: the data accompanying @color_line + * @user_data: the data accompanying this method + * + * A virtual method for the @hb_color_line_t to fetches the extend mode. + * + * Return value: the extend mode of @color_line + * + * Since: 7.0.0 + */ +typedef hb_paint_extend_t (*hb_color_line_get_extend_func_t) (hb_color_line_t *color_line, + void *color_line_data, + void *user_data); + +/** + * hb_color_line_t: + * + * A struct containing color information for a gradient. + * + * Since: 7.0.0 + */ +struct hb_color_line_t { + void *data; + + hb_color_line_get_color_stops_func_t get_color_stops; + void *get_color_stops_user_data; + + hb_color_line_get_extend_func_t get_extend; + void *get_extend_user_data; + + void *reserved0; + void *reserved1; + void *reserved2; + void *reserved3; + void *reserved5; + void *reserved6; + void *reserved7; + void *reserved8; +}; + +HB_EXTERN unsigned int +hb_color_line_get_color_stops (hb_color_line_t *color_line, + unsigned int start, + unsigned int *count, + hb_color_stop_t *color_stops); + +HB_EXTERN hb_paint_extend_t +hb_color_line_get_extend (hb_color_line_t *color_line); + +/** + * hb_paint_linear_gradient_func_t: + * @funcs: paint functions object + * @paint_data: The data accompanying the paint functions in hb_font_paint_glyph() + * @color_line: Color information for the gradient + * @x0: X coordinate of the first point + * @y0: Y coordinate of the first point + * @x1: X coordinate of the second point + * @y1: Y coordinate of the second point + * @x2: X coordinate of the third point + * @y2: Y coordinate of the third point + * @user_data: User data pointer passed to hb_paint_funcs_set_linear_gradient_func() + * + * A virtual method for the #hb_paint_funcs_t to paint a linear + * gradient everywhere within the current clip. + * + * The @color_line object contains information about the colors of the gradients. + * It is only valid for the duration of the callback, you cannot keep it around. + * + * The coordinates of the points are interpreted according + * to the current transform. + * + * See the OpenType spec [COLR](https://learn.microsoft.com/en-us/typography/opentype/spec/colr) + * section for details on how the points define the direction + * of the gradient, and how to interpret the @color_line. + * + * Since: 7.0.0 + */ +typedef void (*hb_paint_linear_gradient_func_t) (hb_paint_funcs_t *funcs, + void *paint_data, + hb_color_line_t *color_line, + float x0, float y0, + float x1, float y1, + float x2, float y2, + void *user_data); + +/** + * hb_paint_radial_gradient_func_t: + * @funcs: paint functions object + * @paint_data: The data accompanying the paint functions in hb_font_paint_glyph() + * @color_line: Color information for the gradient + * @x0: X coordinate of the first circle's center + * @y0: Y coordinate of the first circle's center + * @r0: radius of the first circle + * @x1: X coordinate of the second circle's center + * @y1: Y coordinate of the second circle's center + * @r1: radius of the second circle + * @user_data: User data pointer passed to hb_paint_funcs_set_radial_gradient_func() + * + * A virtual method for the #hb_paint_funcs_t to paint a radial + * gradient everywhere within the current clip. + * + * The @color_line object contains information about the colors of the gradients. + * It is only valid for the duration of the callback, you cannot keep it around. + * + * The coordinates of the points are interpreted according + * to the current transform. + * + * See the OpenType spec [COLR](https://learn.microsoft.com/en-us/typography/opentype/spec/colr) + * section for details on how the points define the direction + * of the gradient, and how to interpret the @color_line. + * + * Since: 7.0.0 + */ +typedef void (*hb_paint_radial_gradient_func_t) (hb_paint_funcs_t *funcs, + void *paint_data, + hb_color_line_t *color_line, + float x0, float y0, float r0, + float x1, float y1, float r1, + void *user_data); + +/** + * hb_paint_sweep_gradient_func_t: + * @funcs: paint functions object + * @paint_data: The data accompanying the paint functions in hb_font_paint_glyph() + * @color_line: Color information for the gradient + * @x0: X coordinate of the circle's center + * @y0: Y coordinate of the circle's center + * @start_angle: the start angle, in radians + * @end_angle: the end angle, in radians + * @user_data: User data pointer passed to hb_paint_funcs_set_sweep_gradient_func() + * + * A virtual method for the #hb_paint_funcs_t to paint a sweep + * gradient everywhere within the current clip. + * + * The @color_line object contains information about the colors of the gradients. + * It is only valid for the duration of the callback, you cannot keep it around. + * + * The coordinates of the points are interpreted according + * to the current transform. + * + * See the OpenType spec [COLR](https://learn.microsoft.com/en-us/typography/opentype/spec/colr) + * section for details on how the points define the direction + * of the gradient, and how to interpret the @color_line. + * + * Since: 7.0.0 + */ +typedef void (*hb_paint_sweep_gradient_func_t) (hb_paint_funcs_t *funcs, + void *paint_data, + hb_color_line_t *color_line, + float x0, float y0, + float start_angle, + float end_angle, + void *user_data); + +/** + * hb_paint_composite_mode_t: + * @HB_PAINT_COMPOSITE_MODE_CLEAR: clear destination layer (bounded) + * @HB_PAINT_COMPOSITE_MODE_SRC: replace destination layer (bounded) + * @HB_PAINT_COMPOSITE_MODE_SRC_OVER: draw source layer on top of destination layer + * (bounded) + * @HB_PAINT_COMPOSITE_MODE_SRC_IN: draw source where there was destination content + * (unbounded) + * @HB_PAINT_COMPOSITE_MODE_SRC_OUT: draw source where there was no destination + * content (unbounded) + * @HB_PAINT_COMPOSITE_MODE_SRC_ATOP: draw source on top of destination content and + * only there + * @HB_PAINT_COMPOSITE_MODE_DEST: ignore the source + * @HB_PAINT_COMPOSITE_MODE_DEST_OVER: draw destination on top of source + * @HB_PAINT_COMPOSITE_MODE_DEST_IN: leave destination only where there was + * source content (unbounded) + * @HB_PAINT_COMPOSITE_MODE_DEST_OUT: leave destination only where there was no + * source content + * @HB_PAINT_COMPOSITE_MODE_DEST_ATOP: leave destination on top of source content + * and only there (unbounded) + * @HB_PAINT_COMPOSITE_MODE_XOR: source and destination are shown where there is only + * one of them + * @HB_PAINT_COMPOSITE_MODE_PLUS: source and destination layers are accumulated + * @HB_PAINT_COMPOSITE_MODE_MULTIPLY: source and destination layers are multiplied. + * This causes the result to be at least as dark as the darker inputs. + * @HB_PAINT_COMPOSITE_MODE_SCREEN: source and destination are complemented and + * multiplied. This causes the result to be at least as light as the lighter + * inputs. + * @HB_PAINT_COMPOSITE_MODE_OVERLAY: multiplies or screens, depending on the + * lightness of the destination color. + * @HB_PAINT_COMPOSITE_MODE_DARKEN: replaces the destination with the source if it + * is darker, otherwise keeps the source. + * @HB_PAINT_COMPOSITE_MODE_LIGHTEN: replaces the destination with the source if it + * is lighter, otherwise keeps the source. + * @HB_PAINT_COMPOSITE_MODE_COLOR_DODGE: brightens the destination color to reflect + * the source color. + * @HB_PAINT_COMPOSITE_MODE_COLOR_BURN: darkens the destination color to reflect + * the source color. + * @HB_PAINT_COMPOSITE_MODE_HARD_LIGHT: Multiplies or screens, dependent on source + * color. + * @HB_PAINT_COMPOSITE_MODE_SOFT_LIGHT: Darkens or lightens, dependent on source + * color. + * @HB_PAINT_COMPOSITE_MODE_DIFFERENCE: Takes the difference of the source and + * destination color. + * @HB_PAINT_COMPOSITE_MODE_EXCLUSION: Produces an effect similar to difference, but + * with lower contrast. + * @HB_PAINT_COMPOSITE_MODE_HSL_HUE: Creates a color with the hue of the source + * and the saturation and luminosity of the target. + * @HB_PAINT_COMPOSITE_MODE_HSL_SATURATION: Creates a color with the saturation + * of the source and the hue and luminosity of the target. Painting with + * this mode onto a gray area produces no change. + * @HB_PAINT_COMPOSITE_MODE_HSL_COLOR: Creates a color with the hue and saturation + * of the source and the luminosity of the target. This preserves the gray + * levels of the target and is useful for coloring monochrome images or + * tinting color images. + * @HB_PAINT_COMPOSITE_MODE_HSL_LUMINOSITY: Creates a color with the luminosity of + * the source and the hue and saturation of the target. This produces an + * inverse effect to @HB_PAINT_COMPOSITE_MODE_HSL_COLOR. + * + * The values of this enumeration describe the compositing modes + * that can be used when combining temporary redirected drawing + * with the backdrop. + * + * See the OpenType spec [COLR](https://learn.microsoft.com/en-us/typography/opentype/spec/colr) + * section for details. + * + * Since: 7.0.0 + */ +typedef enum { + HB_PAINT_COMPOSITE_MODE_CLEAR, + HB_PAINT_COMPOSITE_MODE_SRC, + HB_PAINT_COMPOSITE_MODE_DEST, + HB_PAINT_COMPOSITE_MODE_SRC_OVER, + HB_PAINT_COMPOSITE_MODE_DEST_OVER, + HB_PAINT_COMPOSITE_MODE_SRC_IN, + HB_PAINT_COMPOSITE_MODE_DEST_IN, + HB_PAINT_COMPOSITE_MODE_SRC_OUT, + HB_PAINT_COMPOSITE_MODE_DEST_OUT, + HB_PAINT_COMPOSITE_MODE_SRC_ATOP, + HB_PAINT_COMPOSITE_MODE_DEST_ATOP, + HB_PAINT_COMPOSITE_MODE_XOR, + HB_PAINT_COMPOSITE_MODE_PLUS, + HB_PAINT_COMPOSITE_MODE_SCREEN, + HB_PAINT_COMPOSITE_MODE_OVERLAY, + HB_PAINT_COMPOSITE_MODE_DARKEN, + HB_PAINT_COMPOSITE_MODE_LIGHTEN, + HB_PAINT_COMPOSITE_MODE_COLOR_DODGE, + HB_PAINT_COMPOSITE_MODE_COLOR_BURN, + HB_PAINT_COMPOSITE_MODE_HARD_LIGHT, + HB_PAINT_COMPOSITE_MODE_SOFT_LIGHT, + HB_PAINT_COMPOSITE_MODE_DIFFERENCE, + HB_PAINT_COMPOSITE_MODE_EXCLUSION, + HB_PAINT_COMPOSITE_MODE_MULTIPLY, + HB_PAINT_COMPOSITE_MODE_HSL_HUE, + HB_PAINT_COMPOSITE_MODE_HSL_SATURATION, + HB_PAINT_COMPOSITE_MODE_HSL_COLOR, + HB_PAINT_COMPOSITE_MODE_HSL_LUMINOSITY +} hb_paint_composite_mode_t; + +/** + * hb_paint_push_group_func_t: + * @funcs: paint functions object + * @paint_data: The data accompanying the paint functions in hb_font_paint_glyph() + * @user_data: User data pointer passed to hb_paint_funcs_set_push_group_func() + * + * A virtual method for the #hb_paint_funcs_t to use + * an intermediate surface for subsequent paint calls. + * + * The drawing will be redirected to an intermediate surface + * until a matching call to the #hb_paint_funcs_pop_group_func_t + * vfunc. + * + * Since: 7.0.0 + */ +typedef void (*hb_paint_push_group_func_t) (hb_paint_funcs_t *funcs, + void *paint_data, + void *user_data); + +/** + * hb_paint_pop_group_func_t: + * @funcs: paint functions object + * @paint_data: The data accompanying the paint functions in hb_font_paint_glyph() + * @mode: the compositing mode to use + * @user_data: User data pointer passed to hb_paint_funcs_set_pop_group_func() + * + * A virtual method for the #hb_paint_funcs_t to undo + * the effect of a prior call to the #hb_paint_funcs_push_group_func_t + * vfunc. + * + * This call stops the redirection to the intermediate surface, + * and then composites it on the previous surface, using the + * compositing mode passed to this call. + * + * Since: 7.0.0 + */ +typedef void (*hb_paint_pop_group_func_t) (hb_paint_funcs_t *funcs, + void *paint_data, + hb_paint_composite_mode_t mode, + void *user_data); + +/** + * hb_paint_custom_palette_color_func_t: + * @funcs: paint functions object + * @paint_data: The data accompanying the paint functions in hb_font_paint_glyph() + * @color_index: the color index + * @color: (out): fetched color + * @user_data: User data pointer passed to hb_paint_funcs_set_pop_group_func() + * + * A virtual method for the #hb_paint_funcs_t to fetch a color from the custom + * color palette. + * + * Custom palette colors override the colors from the fonts selected color + * palette. It is not necessary to override all palette entries; for entries + * that should be taken from the font palette, return `false`. + * + * This function might get called multiple times, but the custom palette is + * expected to remain unchanged for duration of a hb_font_paint_glyph() call. + * + * Return value: `true` if found, `false` otherwise + * + * Since: 7.0.0 + */ +typedef hb_bool_t (*hb_paint_custom_palette_color_func_t) (hb_paint_funcs_t *funcs, + void *paint_data, + unsigned int color_index, + hb_color_t *color, + void *user_data); + + +/** + * hb_paint_funcs_set_push_transform_func: + * @funcs: A paint functions struct + * @func: (closure user_data) (destroy destroy) (scope notified): The push-transform callback + * @user_data: Data to pass to @func + * @destroy: (nullable): Function to call when @user_data is no longer needed + * + * Sets the push-transform callback on the paint functions struct. + * + * Since: 7.0.0 + */ +HB_EXTERN void +hb_paint_funcs_set_push_transform_func (hb_paint_funcs_t *funcs, + hb_paint_push_transform_func_t func, + void *user_data, + hb_destroy_func_t destroy); + +/** + * hb_paint_funcs_set_pop_transform_func: + * @funcs: A paint functions struct + * @func: (closure user_data) (destroy destroy) (scope notified): The pop-transform callback + * @user_data: Data to pass to @func + * @destroy: (nullable): Function to call when @user_data is no longer needed + * + * Sets the pop-transform callback on the paint functions struct. + * + * Since: 7.0.0 + */ +HB_EXTERN void +hb_paint_funcs_set_pop_transform_func (hb_paint_funcs_t *funcs, + hb_paint_pop_transform_func_t func, + void *user_data, + hb_destroy_func_t destroy); + +/** + * hb_paint_funcs_set_color_glyph_func: + * @funcs: A paint functions struct + * @func: (closure user_data) (destroy destroy) (scope notified): The color-glyph callback + * @user_data: Data to pass to @func + * @destroy: (nullable): Function to call when @user_data is no longer needed + * + * Sets the color-glyph callback on the paint functions struct. + * + * Since: 8.2.0 + */ +HB_EXTERN void +hb_paint_funcs_set_color_glyph_func (hb_paint_funcs_t *funcs, + hb_paint_color_glyph_func_t func, + void *user_data, + hb_destroy_func_t destroy); + +/** + * hb_paint_funcs_set_push_clip_glyph_func: + * @funcs: A paint functions struct + * @func: (closure user_data) (destroy destroy) (scope notified): The push-clip-glyph callback + * @user_data: Data to pass to @func + * @destroy: (nullable): Function to call when @user_data is no longer needed + * + * Sets the push-clip-glyph callback on the paint functions struct. + * + * Since: 7.0.0 + */ +HB_EXTERN void +hb_paint_funcs_set_push_clip_glyph_func (hb_paint_funcs_t *funcs, + hb_paint_push_clip_glyph_func_t func, + void *user_data, + hb_destroy_func_t destroy); + +/** + * hb_paint_funcs_set_push_clip_rectangle_func: + * @funcs: A paint functions struct + * @func: (closure user_data) (destroy destroy) (scope notified): The push-clip-rectangle callback + * @user_data: Data to pass to @func + * @destroy: (nullable): Function to call when @user_data is no longer needed + * + * Sets the push-clip-rect callback on the paint functions struct. + * + * Since: 7.0.0 + */ +HB_EXTERN void +hb_paint_funcs_set_push_clip_rectangle_func (hb_paint_funcs_t *funcs, + hb_paint_push_clip_rectangle_func_t func, + void *user_data, + hb_destroy_func_t destroy); + +/** + * hb_paint_funcs_set_pop_clip_func: + * @funcs: A paint functions struct + * @func: (closure user_data) (destroy destroy) (scope notified): The pop-clip callback + * @user_data: Data to pass to @func + * @destroy: (nullable): Function to call when @user_data is no longer needed + * + * Sets the pop-clip callback on the paint functions struct. + * + * Since: 7.0.0 + */ +HB_EXTERN void +hb_paint_funcs_set_pop_clip_func (hb_paint_funcs_t *funcs, + hb_paint_pop_clip_func_t func, + void *user_data, + hb_destroy_func_t destroy); + +/** + * hb_paint_funcs_set_color_func: + * @funcs: A paint functions struct + * @func: (closure user_data) (destroy destroy) (scope notified): The paint-color callback + * @user_data: Data to pass to @func + * @destroy: (nullable): Function to call when @user_data is no longer needed + * + * Sets the paint-color callback on the paint functions struct. + * + * Since: 7.0.0 + */ +HB_EXTERN void +hb_paint_funcs_set_color_func (hb_paint_funcs_t *funcs, + hb_paint_color_func_t func, + void *user_data, + hb_destroy_func_t destroy); + +/** + * hb_paint_funcs_set_image_func: + * @funcs: A paint functions struct + * @func: (closure user_data) (destroy destroy) (scope notified): The paint-image callback + * @user_data: Data to pass to @func + * @destroy: (nullable): Function to call when @user_data is no longer needed + * + * Sets the paint-image callback on the paint functions struct. + * + * Since: 7.0.0 + */ +HB_EXTERN void +hb_paint_funcs_set_image_func (hb_paint_funcs_t *funcs, + hb_paint_image_func_t func, + void *user_data, + hb_destroy_func_t destroy); + +/** + * hb_paint_funcs_set_linear_gradient_func: + * @funcs: A paint functions struct + * @func: (closure user_data) (destroy destroy) (scope notified): The linear-gradient callback + * @user_data: Data to pass to @func + * @destroy: (nullable): Function to call when @user_data is no longer needed + * + * Sets the linear-gradient callback on the paint functions struct. + * + * Since: 7.0.0 + */ +HB_EXTERN void +hb_paint_funcs_set_linear_gradient_func (hb_paint_funcs_t *funcs, + hb_paint_linear_gradient_func_t func, + void *user_data, + hb_destroy_func_t destroy); + +/** + * hb_paint_funcs_set_radial_gradient_func: + * @funcs: A paint functions struct + * @func: (closure user_data) (destroy destroy) (scope notified): The radial-gradient callback + * @user_data: Data to pass to @func + * @destroy: (nullable): Function to call when @user_data is no longer needed + * + * Sets the radial-gradient callback on the paint functions struct. + * + * Since: 7.0.0 + */ +HB_EXTERN void +hb_paint_funcs_set_radial_gradient_func (hb_paint_funcs_t *funcs, + hb_paint_radial_gradient_func_t func, + void *user_data, + hb_destroy_func_t destroy); + +/** + * hb_paint_funcs_set_sweep_gradient_func: + * @funcs: A paint functions struct + * @func: (closure user_data) (destroy destroy) (scope notified): The sweep-gradient callback + * @user_data: Data to pass to @func + * @destroy: (nullable): Function to call when @user_data is no longer needed + * + * Sets the sweep-gradient callback on the paint functions struct. + * + * Since: 7.0.0 + */ +HB_EXTERN void +hb_paint_funcs_set_sweep_gradient_func (hb_paint_funcs_t *funcs, + hb_paint_sweep_gradient_func_t func, + void *user_data, + hb_destroy_func_t destroy); + +/** + * hb_paint_funcs_set_push_group_func: + * @funcs: A paint functions struct + * @func: (closure user_data) (destroy destroy) (scope notified): The push-group callback + * @user_data: Data to pass to @func + * @destroy: (nullable): Function to call when @user_data is no longer needed + * + * Sets the push-group callback on the paint functions struct. + * + * Since: 7.0.0 + */ +HB_EXTERN void +hb_paint_funcs_set_push_group_func (hb_paint_funcs_t *funcs, + hb_paint_push_group_func_t func, + void *user_data, + hb_destroy_func_t destroy); + +/** + * hb_paint_funcs_set_pop_group_func: + * @funcs: A paint functions struct + * @func: (closure user_data) (destroy destroy) (scope notified): The pop-group callback + * @user_data: Data to pass to @func + * @destroy: (nullable): Function to call when @user_data is no longer needed + * + * Sets the pop-group callback on the paint functions struct. + * + * Since: 7.0.0 + */ +HB_EXTERN void +hb_paint_funcs_set_pop_group_func (hb_paint_funcs_t *funcs, + hb_paint_pop_group_func_t func, + void *user_data, + hb_destroy_func_t destroy); + +/** + * hb_paint_funcs_set_custom_palette_color_func: + * @funcs: A paint functions struct + * @func: (closure user_data) (destroy destroy) (scope notified): The custom-palette-color callback + * @user_data: Data to pass to @func + * @destroy: (nullable): Function to call when @user_data is no longer needed + * + * Sets the custom-palette-color callback on the paint functions struct. + * + * Since: 7.0.0 + */ +HB_EXTERN void +hb_paint_funcs_set_custom_palette_color_func (hb_paint_funcs_t *funcs, + hb_paint_custom_palette_color_func_t func, + void *user_data, + hb_destroy_func_t destroy); +/* + * Manual API + */ + +HB_EXTERN void +hb_paint_push_transform (hb_paint_funcs_t *funcs, void *paint_data, + float xx, float yx, + float xy, float yy, + float dx, float dy); + +HB_EXTERN void +hb_paint_push_font_transform (hb_paint_funcs_t *funcs, void *paint_data, + const hb_font_t *font); + +HB_EXTERN void +hb_paint_push_inverse_font_transform (hb_paint_funcs_t *funcs, void *paint_data, + const hb_font_t *font); + +HB_EXTERN void +hb_paint_pop_transform (hb_paint_funcs_t *funcs, void *paint_data); + +HB_EXTERN hb_bool_t +hb_paint_color_glyph (hb_paint_funcs_t *funcs, void *paint_data, + hb_codepoint_t glyph, + hb_font_t *font); + +HB_EXTERN void +hb_paint_push_clip_glyph (hb_paint_funcs_t *funcs, void *paint_data, + hb_codepoint_t glyph, + hb_font_t *font); + +HB_EXTERN void +hb_paint_push_clip_rectangle (hb_paint_funcs_t *funcs, void *paint_data, + float xmin, float ymin, + float xmax, float ymax); + +HB_EXTERN void +hb_paint_pop_clip (hb_paint_funcs_t *funcs, void *paint_data); + +HB_EXTERN void +hb_paint_color (hb_paint_funcs_t *funcs, void *paint_data, + hb_bool_t is_foreground, + hb_color_t color); + +HB_EXTERN void +hb_paint_image (hb_paint_funcs_t *funcs, void *paint_data, + hb_blob_t *image, + unsigned int width, + unsigned int height, + hb_tag_t format, + float slant, + hb_glyph_extents_t *extents); + +HB_EXTERN void +hb_paint_linear_gradient (hb_paint_funcs_t *funcs, void *paint_data, + hb_color_line_t *color_line, + float x0, float y0, + float x1, float y1, + float x2, float y2); + +HB_EXTERN void +hb_paint_radial_gradient (hb_paint_funcs_t *funcs, void *paint_data, + hb_color_line_t *color_line, + float x0, float y0, + float r0, + float x1, float y1, + float r1); + +HB_EXTERN void +hb_paint_sweep_gradient (hb_paint_funcs_t *funcs, void *paint_data, + hb_color_line_t *color_line, + float x0, float y0, + float start_angle, float end_angle); + +HB_EXTERN void +hb_paint_push_group (hb_paint_funcs_t *funcs, void *paint_data); + +HB_EXTERN void +hb_paint_pop_group (hb_paint_funcs_t *funcs, void *paint_data, + hb_paint_composite_mode_t mode); + +HB_EXTERN hb_bool_t +hb_paint_custom_palette_color (hb_paint_funcs_t *funcs, void *paint_data, + unsigned int color_index, + hb_color_t *color); + +HB_END_DECLS + +#endif /* HB_PAINT_H */ diff --git a/dependencies/winx64/include/harfbuzz/hb-script-list.h b/dependencies/winx64/include/harfbuzz/hb-script-list.h new file mode 100644 index 0000000..88e270d --- /dev/null +++ b/dependencies/winx64/include/harfbuzz/hb-script-list.h @@ -0,0 +1,484 @@ +/* + * Copyright © 2007,2008,2009 Red Hat, Inc. + * Copyright © 2011,2012 Google, Inc. + * + * This is part of HarfBuzz, a text shaping library. + * + * Permission is hereby granted, without written agreement and without + * license or royalty fees, to use, copy, modify, and distribute this + * software and its documentation for any purpose, provided that the + * above copyright notice and the following two paragraphs appear in + * all copies of this software. + * + * IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE TO ANY PARTY FOR + * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES + * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN + * IF THE COPYRIGHT HOLDER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + * THE COPYRIGHT HOLDER SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, + * BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND + * FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS + * ON AN "AS IS" BASIS, AND THE COPYRIGHT HOLDER HAS NO OBLIGATION TO + * PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. + * + * Red Hat Author(s): Behdad Esfahbod + * Google Author(s): Behdad Esfahbod + */ + +#if !defined(HB_H_IN) && !defined(HB_NO_SINGLE_HEADER_ERROR) +#error "Include instead." +#endif + +#ifndef HB_SCRIPT_LIST_H +#define HB_SCRIPT_LIST_H + +/* This file belongs to the middle of hb-common.h. + * The reason it has been surgically extracted is because + * FreeType imports types and enums from hb-common.h, + * and since this enum is large and growing, we want to + * make it easy to just copy the file over to FreeType. + * https://github.com/harfbuzz/harfbuzz/issues/5271 + */ + +/* Dummy lines to make our checks happy. */ +#if 0 +#include "hb-common.h" +HB_BEGIN_DECLS +HB_END_DECLS +#endif + + +/** + * hb_script_t: + * @HB_SCRIPT_COMMON: `Zyyy` + * @HB_SCRIPT_INHERITED: `Zinh` + * @HB_SCRIPT_UNKNOWN: `Zzzz` + * @HB_SCRIPT_ARABIC: `Arab` + * @HB_SCRIPT_ARMENIAN: `Armn` + * @HB_SCRIPT_BENGALI: `Beng` + * @HB_SCRIPT_CYRILLIC: `Cyrl` + * @HB_SCRIPT_DEVANAGARI: `Deva` + * @HB_SCRIPT_GEORGIAN: `Geor` + * @HB_SCRIPT_GREEK: `Grek` + * @HB_SCRIPT_GUJARATI: `Gujr` + * @HB_SCRIPT_GURMUKHI: `Guru` + * @HB_SCRIPT_HANGUL: `Hang` + * @HB_SCRIPT_HAN: `Hani` + * @HB_SCRIPT_HEBREW: `Hebr` + * @HB_SCRIPT_HIRAGANA: `Hira` + * @HB_SCRIPT_KANNADA: `Knda` + * @HB_SCRIPT_KATAKANA: `Kana` + * @HB_SCRIPT_LAO: `Laoo` + * @HB_SCRIPT_LATIN: `Latn` + * @HB_SCRIPT_MALAYALAM: `Mlym` + * @HB_SCRIPT_ORIYA: `Orya` + * @HB_SCRIPT_TAMIL: `Taml` + * @HB_SCRIPT_TELUGU: `Telu` + * @HB_SCRIPT_THAI: `Thai` + * @HB_SCRIPT_TIBETAN: `Tibt` + * @HB_SCRIPT_BOPOMOFO: `Bopo` + * @HB_SCRIPT_BRAILLE: `Brai` + * @HB_SCRIPT_CANADIAN_SYLLABICS: `Cans` + * @HB_SCRIPT_CHEROKEE: `Cher` + * @HB_SCRIPT_ETHIOPIC: `Ethi` + * @HB_SCRIPT_KHMER: `Khmr` + * @HB_SCRIPT_MONGOLIAN: `Mong` + * @HB_SCRIPT_MYANMAR: `Mymr` + * @HB_SCRIPT_OGHAM: `Ogam` + * @HB_SCRIPT_RUNIC: `Runr` + * @HB_SCRIPT_SINHALA: `Sinh` + * @HB_SCRIPT_SYRIAC: `Syrc` + * @HB_SCRIPT_THAANA: `Thaa` + * @HB_SCRIPT_YI: `Yiii` + * @HB_SCRIPT_DESERET: `Dsrt` + * @HB_SCRIPT_GOTHIC: `Goth` + * @HB_SCRIPT_OLD_ITALIC: `Ital` + * @HB_SCRIPT_BUHID: `Buhd` + * @HB_SCRIPT_HANUNOO: `Hano` + * @HB_SCRIPT_TAGALOG: `Tglg` + * @HB_SCRIPT_TAGBANWA: `Tagb` + * @HB_SCRIPT_CYPRIOT: `Cprt` + * @HB_SCRIPT_LIMBU: `Limb` + * @HB_SCRIPT_LINEAR_B: `Linb` + * @HB_SCRIPT_OSMANYA: `Osma` + * @HB_SCRIPT_SHAVIAN: `Shaw` + * @HB_SCRIPT_TAI_LE: `Tale` + * @HB_SCRIPT_UGARITIC: `Ugar` + * @HB_SCRIPT_BUGINESE: `Bugi` + * @HB_SCRIPT_COPTIC: `Copt` + * @HB_SCRIPT_GLAGOLITIC: `Glag` + * @HB_SCRIPT_KHAROSHTHI: `Khar` + * @HB_SCRIPT_NEW_TAI_LUE: `Talu` + * @HB_SCRIPT_OLD_PERSIAN: `Xpeo` + * @HB_SCRIPT_SYLOTI_NAGRI: `Sylo` + * @HB_SCRIPT_TIFINAGH: `Tfng` + * @HB_SCRIPT_BALINESE: `Bali` + * @HB_SCRIPT_CUNEIFORM: `Xsux` + * @HB_SCRIPT_NKO: `Nkoo` + * @HB_SCRIPT_PHAGS_PA: `Phag` + * @HB_SCRIPT_PHOENICIAN: `Phnx` + * @HB_SCRIPT_CARIAN: `Cari` + * @HB_SCRIPT_CHAM: `Cham` + * @HB_SCRIPT_KAYAH_LI: `Kali` + * @HB_SCRIPT_LEPCHA: `Lepc` + * @HB_SCRIPT_LYCIAN: `Lyci` + * @HB_SCRIPT_LYDIAN: `Lydi` + * @HB_SCRIPT_OL_CHIKI: `Olck` + * @HB_SCRIPT_REJANG: `Rjng` + * @HB_SCRIPT_SAURASHTRA: `Saur` + * @HB_SCRIPT_SUNDANESE: `Sund` + * @HB_SCRIPT_VAI: `Vaii` + * @HB_SCRIPT_AVESTAN: `Avst` + * @HB_SCRIPT_BAMUM: `Bamu` + * @HB_SCRIPT_EGYPTIAN_HIEROGLYPHS: `Egyp` + * @HB_SCRIPT_IMPERIAL_ARAMAIC: `Armi` + * @HB_SCRIPT_INSCRIPTIONAL_PAHLAVI: `Phli` + * @HB_SCRIPT_INSCRIPTIONAL_PARTHIAN: `Prti` + * @HB_SCRIPT_JAVANESE: `Java` + * @HB_SCRIPT_KAITHI: `Kthi` + * @HB_SCRIPT_LISU: `Lisu` + * @HB_SCRIPT_MEETEI_MAYEK: `Mtei` + * @HB_SCRIPT_OLD_SOUTH_ARABIAN: `Sarb` + * @HB_SCRIPT_OLD_TURKIC: `Orkh` + * @HB_SCRIPT_SAMARITAN: `Samr` + * @HB_SCRIPT_TAI_THAM: `Lana` + * @HB_SCRIPT_TAI_VIET: `Tavt` + * @HB_SCRIPT_BATAK: `Batk` + * @HB_SCRIPT_BRAHMI: `Brah` + * @HB_SCRIPT_MANDAIC: `Mand` + * @HB_SCRIPT_CHAKMA: `Cakm` + * @HB_SCRIPT_MEROITIC_CURSIVE: `Merc` + * @HB_SCRIPT_MEROITIC_HIEROGLYPHS: `Mero` + * @HB_SCRIPT_MIAO: `Plrd` + * @HB_SCRIPT_SHARADA: `Shrd` + * @HB_SCRIPT_SORA_SOMPENG: `Sora` + * @HB_SCRIPT_TAKRI: `Takr` + * @HB_SCRIPT_BASSA_VAH: `Bass`, Since: 0.9.30 + * @HB_SCRIPT_CAUCASIAN_ALBANIAN: `Aghb`, Since: 0.9.30 + * @HB_SCRIPT_DUPLOYAN: `Dupl`, Since: 0.9.30 + * @HB_SCRIPT_ELBASAN: `Elba`, Since: 0.9.30 + * @HB_SCRIPT_GRANTHA: `Gran`, Since: 0.9.30 + * @HB_SCRIPT_KHOJKI: `Khoj`, Since: 0.9.30 + * @HB_SCRIPT_KHUDAWADI: `Sind`, Since: 0.9.30 + * @HB_SCRIPT_LINEAR_A: `Lina`, Since: 0.9.30 + * @HB_SCRIPT_MAHAJANI: `Mahj`, Since: 0.9.30 + * @HB_SCRIPT_MANICHAEAN: `Mani`, Since: 0.9.30 + * @HB_SCRIPT_MENDE_KIKAKUI: `Mend`, Since: 0.9.30 + * @HB_SCRIPT_MODI: `Modi`, Since: 0.9.30 + * @HB_SCRIPT_MRO: `Mroo`, Since: 0.9.30 + * @HB_SCRIPT_NABATAEAN: `Nbat`, Since: 0.9.30 + * @HB_SCRIPT_OLD_NORTH_ARABIAN: `Narb`, Since: 0.9.30 + * @HB_SCRIPT_OLD_PERMIC: `Perm`, Since: 0.9.30 + * @HB_SCRIPT_PAHAWH_HMONG: `Hmng`, Since: 0.9.30 + * @HB_SCRIPT_PALMYRENE: `Palm`, Since: 0.9.30 + * @HB_SCRIPT_PAU_CIN_HAU: `Pauc`, Since: 0.9.30 + * @HB_SCRIPT_PSALTER_PAHLAVI: `Phlp`, Since: 0.9.30 + * @HB_SCRIPT_SIDDHAM: `Sidd`, Since: 0.9.30 + * @HB_SCRIPT_TIRHUTA: `Tirh`, Since: 0.9.30 + * @HB_SCRIPT_WARANG_CITI: `Wara`, Since: 0.9.30 + * @HB_SCRIPT_AHOM: `Ahom`, Since: 0.9.30 + * @HB_SCRIPT_ANATOLIAN_HIEROGLYPHS: `Hluw`, Since: 0.9.30 + * @HB_SCRIPT_HATRAN: `Hatr`, Since: 0.9.30 + * @HB_SCRIPT_MULTANI: `Mult`, Since: 0.9.30 + * @HB_SCRIPT_OLD_HUNGARIAN: `Hung`, Since: 0.9.30 + * @HB_SCRIPT_SIGNWRITING: `Sgnw`, Since: 0.9.30 + * @HB_SCRIPT_ADLAM: `Adlm`, Since: 1.3.0 + * @HB_SCRIPT_BHAIKSUKI: `Bhks`, Since: 1.3.0 + * @HB_SCRIPT_MARCHEN: `Marc`, Since: 1.3.0 + * @HB_SCRIPT_OSAGE: `Osge`, Since: 1.3.0 + * @HB_SCRIPT_TANGUT: `Tang`, Since: 1.3.0 + * @HB_SCRIPT_NEWA: `Newa`, Since: 1.3.0 + * @HB_SCRIPT_MASARAM_GONDI: `Gonm`, Since: 1.6.0 + * @HB_SCRIPT_NUSHU: `Nshu`, Since: 1.6.0 + * @HB_SCRIPT_SOYOMBO: `Soyo`, Since: 1.6.0 + * @HB_SCRIPT_ZANABAZAR_SQUARE: `Zanb`, Since: 1.6.0 + * @HB_SCRIPT_DOGRA: `Dogr`, Since: 1.8.0 + * @HB_SCRIPT_GUNJALA_GONDI: `Gong`, Since: 1.8.0 + * @HB_SCRIPT_HANIFI_ROHINGYA: `Rohg`, Since: 1.8.0 + * @HB_SCRIPT_MAKASAR: `Maka`, Since: 1.8.0 + * @HB_SCRIPT_MEDEFAIDRIN: `Medf`, Since: 1.8.0 + * @HB_SCRIPT_OLD_SOGDIAN: `Sogo`, Since: 1.8.0 + * @HB_SCRIPT_SOGDIAN: `Sogd`, Since: 1.8.0 + * @HB_SCRIPT_ELYMAIC: `Elym`, Since: 2.4.0 + * @HB_SCRIPT_NANDINAGARI: `Nand`, Since: 2.4.0 + * @HB_SCRIPT_NYIAKENG_PUACHUE_HMONG: `Hmnp`, Since: 2.4.0 + * @HB_SCRIPT_WANCHO: `Wcho`, Since: 2.4.0 + * @HB_SCRIPT_CHORASMIAN: `Chrs`, Since: 2.6.7 + * @HB_SCRIPT_DIVES_AKURU: `Diak`, Since: 2.6.7 + * @HB_SCRIPT_KHITAN_SMALL_SCRIPT: `Kits`, Since: 2.6.7 + * @HB_SCRIPT_YEZIDI: `Yezi`, Since: 2.6.7 + * @HB_SCRIPT_CYPRO_MINOAN: `Cpmn`, Since: 3.0.0 + * @HB_SCRIPT_OLD_UYGHUR: `Ougr`, Since: 3.0.0 + * @HB_SCRIPT_TANGSA: `Tnsa`, Since: 3.0.0 + * @HB_SCRIPT_TOTO: `Toto`, Since: 3.0.0 + * @HB_SCRIPT_VITHKUQI: `Vith`, Since: 3.0.0 + * @HB_SCRIPT_MATH: `Zmth`, Since: 3.4.0 + * @HB_SCRIPT_KAWI: `Kawi`, Since: 5.2.0 + * @HB_SCRIPT_NAG_MUNDARI: `Nagm`, Since: 5.2.0 + * @HB_SCRIPT_GARAY: `Gara`, Since: 10.0.0 + * @HB_SCRIPT_GURUNG_KHEMA: `Gukh`, Since: 10.0.0 + * @HB_SCRIPT_KIRAT_RAI: `Krai`, Since: 10.0.0 + * @HB_SCRIPT_OL_ONAL: `Onao`, Since: 10.0.0 + * @HB_SCRIPT_SUNUWAR: `Sunu`, Since: 10.0.0 + * @HB_SCRIPT_TODHRI: `Todr`, Since: 10.0.0 + * @HB_SCRIPT_TULU_TIGALARI: `Tutg`, Since: 10.0.0 + * @HB_SCRIPT_INVALID: No script set + * + * Data type for scripts. Each #hb_script_t's value is an #hb_tag_t corresponding + * to the four-letter values defined by [ISO 15924](https://unicode.org/iso15924/). + * + * See also the Script (sc) property of the Unicode Character Database. + * + **/ + +/* https://docs.google.com/spreadsheets/d/1Y90M0Ie3MUJ6UVCRDOypOtijlMDLNNyyLk36T6iMu0o */ +typedef enum +{ + HB_SCRIPT_COMMON = HB_TAG ('Z','y','y','y'), /*1.1*/ + HB_SCRIPT_INHERITED = HB_TAG ('Z','i','n','h'), /*1.1*/ + HB_SCRIPT_UNKNOWN = HB_TAG ('Z','z','z','z'), /*5.0*/ + + HB_SCRIPT_ARABIC = HB_TAG ('A','r','a','b'), /*1.1*/ + HB_SCRIPT_ARMENIAN = HB_TAG ('A','r','m','n'), /*1.1*/ + HB_SCRIPT_BENGALI = HB_TAG ('B','e','n','g'), /*1.1*/ + HB_SCRIPT_CYRILLIC = HB_TAG ('C','y','r','l'), /*1.1*/ + HB_SCRIPT_DEVANAGARI = HB_TAG ('D','e','v','a'), /*1.1*/ + HB_SCRIPT_GEORGIAN = HB_TAG ('G','e','o','r'), /*1.1*/ + HB_SCRIPT_GREEK = HB_TAG ('G','r','e','k'), /*1.1*/ + HB_SCRIPT_GUJARATI = HB_TAG ('G','u','j','r'), /*1.1*/ + HB_SCRIPT_GURMUKHI = HB_TAG ('G','u','r','u'), /*1.1*/ + HB_SCRIPT_HANGUL = HB_TAG ('H','a','n','g'), /*1.1*/ + HB_SCRIPT_HAN = HB_TAG ('H','a','n','i'), /*1.1*/ + HB_SCRIPT_HEBREW = HB_TAG ('H','e','b','r'), /*1.1*/ + HB_SCRIPT_HIRAGANA = HB_TAG ('H','i','r','a'), /*1.1*/ + HB_SCRIPT_KANNADA = HB_TAG ('K','n','d','a'), /*1.1*/ + HB_SCRIPT_KATAKANA = HB_TAG ('K','a','n','a'), /*1.1*/ + HB_SCRIPT_LAO = HB_TAG ('L','a','o','o'), /*1.1*/ + HB_SCRIPT_LATIN = HB_TAG ('L','a','t','n'), /*1.1*/ + HB_SCRIPT_MALAYALAM = HB_TAG ('M','l','y','m'), /*1.1*/ + HB_SCRIPT_ORIYA = HB_TAG ('O','r','y','a'), /*1.1*/ + HB_SCRIPT_TAMIL = HB_TAG ('T','a','m','l'), /*1.1*/ + HB_SCRIPT_TELUGU = HB_TAG ('T','e','l','u'), /*1.1*/ + HB_SCRIPT_THAI = HB_TAG ('T','h','a','i'), /*1.1*/ + + HB_SCRIPT_TIBETAN = HB_TAG ('T','i','b','t'), /*2.0*/ + + HB_SCRIPT_BOPOMOFO = HB_TAG ('B','o','p','o'), /*3.0*/ + HB_SCRIPT_BRAILLE = HB_TAG ('B','r','a','i'), /*3.0*/ + HB_SCRIPT_CANADIAN_SYLLABICS = HB_TAG ('C','a','n','s'), /*3.0*/ + HB_SCRIPT_CHEROKEE = HB_TAG ('C','h','e','r'), /*3.0*/ + HB_SCRIPT_ETHIOPIC = HB_TAG ('E','t','h','i'), /*3.0*/ + HB_SCRIPT_KHMER = HB_TAG ('K','h','m','r'), /*3.0*/ + HB_SCRIPT_MONGOLIAN = HB_TAG ('M','o','n','g'), /*3.0*/ + HB_SCRIPT_MYANMAR = HB_TAG ('M','y','m','r'), /*3.0*/ + HB_SCRIPT_OGHAM = HB_TAG ('O','g','a','m'), /*3.0*/ + HB_SCRIPT_RUNIC = HB_TAG ('R','u','n','r'), /*3.0*/ + HB_SCRIPT_SINHALA = HB_TAG ('S','i','n','h'), /*3.0*/ + HB_SCRIPT_SYRIAC = HB_TAG ('S','y','r','c'), /*3.0*/ + HB_SCRIPT_THAANA = HB_TAG ('T','h','a','a'), /*3.0*/ + HB_SCRIPT_YI = HB_TAG ('Y','i','i','i'), /*3.0*/ + + HB_SCRIPT_DESERET = HB_TAG ('D','s','r','t'), /*3.1*/ + HB_SCRIPT_GOTHIC = HB_TAG ('G','o','t','h'), /*3.1*/ + HB_SCRIPT_OLD_ITALIC = HB_TAG ('I','t','a','l'), /*3.1*/ + + HB_SCRIPT_BUHID = HB_TAG ('B','u','h','d'), /*3.2*/ + HB_SCRIPT_HANUNOO = HB_TAG ('H','a','n','o'), /*3.2*/ + HB_SCRIPT_TAGALOG = HB_TAG ('T','g','l','g'), /*3.2*/ + HB_SCRIPT_TAGBANWA = HB_TAG ('T','a','g','b'), /*3.2*/ + + HB_SCRIPT_CYPRIOT = HB_TAG ('C','p','r','t'), /*4.0*/ + HB_SCRIPT_LIMBU = HB_TAG ('L','i','m','b'), /*4.0*/ + HB_SCRIPT_LINEAR_B = HB_TAG ('L','i','n','b'), /*4.0*/ + HB_SCRIPT_OSMANYA = HB_TAG ('O','s','m','a'), /*4.0*/ + HB_SCRIPT_SHAVIAN = HB_TAG ('S','h','a','w'), /*4.0*/ + HB_SCRIPT_TAI_LE = HB_TAG ('T','a','l','e'), /*4.0*/ + HB_SCRIPT_UGARITIC = HB_TAG ('U','g','a','r'), /*4.0*/ + + HB_SCRIPT_BUGINESE = HB_TAG ('B','u','g','i'), /*4.1*/ + HB_SCRIPT_COPTIC = HB_TAG ('C','o','p','t'), /*4.1*/ + HB_SCRIPT_GLAGOLITIC = HB_TAG ('G','l','a','g'), /*4.1*/ + HB_SCRIPT_KHAROSHTHI = HB_TAG ('K','h','a','r'), /*4.1*/ + HB_SCRIPT_NEW_TAI_LUE = HB_TAG ('T','a','l','u'), /*4.1*/ + HB_SCRIPT_OLD_PERSIAN = HB_TAG ('X','p','e','o'), /*4.1*/ + HB_SCRIPT_SYLOTI_NAGRI = HB_TAG ('S','y','l','o'), /*4.1*/ + HB_SCRIPT_TIFINAGH = HB_TAG ('T','f','n','g'), /*4.1*/ + + HB_SCRIPT_BALINESE = HB_TAG ('B','a','l','i'), /*5.0*/ + HB_SCRIPT_CUNEIFORM = HB_TAG ('X','s','u','x'), /*5.0*/ + HB_SCRIPT_NKO = HB_TAG ('N','k','o','o'), /*5.0*/ + HB_SCRIPT_PHAGS_PA = HB_TAG ('P','h','a','g'), /*5.0*/ + HB_SCRIPT_PHOENICIAN = HB_TAG ('P','h','n','x'), /*5.0*/ + + HB_SCRIPT_CARIAN = HB_TAG ('C','a','r','i'), /*5.1*/ + HB_SCRIPT_CHAM = HB_TAG ('C','h','a','m'), /*5.1*/ + HB_SCRIPT_KAYAH_LI = HB_TAG ('K','a','l','i'), /*5.1*/ + HB_SCRIPT_LEPCHA = HB_TAG ('L','e','p','c'), /*5.1*/ + HB_SCRIPT_LYCIAN = HB_TAG ('L','y','c','i'), /*5.1*/ + HB_SCRIPT_LYDIAN = HB_TAG ('L','y','d','i'), /*5.1*/ + HB_SCRIPT_OL_CHIKI = HB_TAG ('O','l','c','k'), /*5.1*/ + HB_SCRIPT_REJANG = HB_TAG ('R','j','n','g'), /*5.1*/ + HB_SCRIPT_SAURASHTRA = HB_TAG ('S','a','u','r'), /*5.1*/ + HB_SCRIPT_SUNDANESE = HB_TAG ('S','u','n','d'), /*5.1*/ + HB_SCRIPT_VAI = HB_TAG ('V','a','i','i'), /*5.1*/ + + HB_SCRIPT_AVESTAN = HB_TAG ('A','v','s','t'), /*5.2*/ + HB_SCRIPT_BAMUM = HB_TAG ('B','a','m','u'), /*5.2*/ + HB_SCRIPT_EGYPTIAN_HIEROGLYPHS = HB_TAG ('E','g','y','p'), /*5.2*/ + HB_SCRIPT_IMPERIAL_ARAMAIC = HB_TAG ('A','r','m','i'), /*5.2*/ + HB_SCRIPT_INSCRIPTIONAL_PAHLAVI = HB_TAG ('P','h','l','i'), /*5.2*/ + HB_SCRIPT_INSCRIPTIONAL_PARTHIAN = HB_TAG ('P','r','t','i'), /*5.2*/ + HB_SCRIPT_JAVANESE = HB_TAG ('J','a','v','a'), /*5.2*/ + HB_SCRIPT_KAITHI = HB_TAG ('K','t','h','i'), /*5.2*/ + HB_SCRIPT_LISU = HB_TAG ('L','i','s','u'), /*5.2*/ + HB_SCRIPT_MEETEI_MAYEK = HB_TAG ('M','t','e','i'), /*5.2*/ + HB_SCRIPT_OLD_SOUTH_ARABIAN = HB_TAG ('S','a','r','b'), /*5.2*/ + HB_SCRIPT_OLD_TURKIC = HB_TAG ('O','r','k','h'), /*5.2*/ + HB_SCRIPT_SAMARITAN = HB_TAG ('S','a','m','r'), /*5.2*/ + HB_SCRIPT_TAI_THAM = HB_TAG ('L','a','n','a'), /*5.2*/ + HB_SCRIPT_TAI_VIET = HB_TAG ('T','a','v','t'), /*5.2*/ + + HB_SCRIPT_BATAK = HB_TAG ('B','a','t','k'), /*6.0*/ + HB_SCRIPT_BRAHMI = HB_TAG ('B','r','a','h'), /*6.0*/ + HB_SCRIPT_MANDAIC = HB_TAG ('M','a','n','d'), /*6.0*/ + + HB_SCRIPT_CHAKMA = HB_TAG ('C','a','k','m'), /*6.1*/ + HB_SCRIPT_MEROITIC_CURSIVE = HB_TAG ('M','e','r','c'), /*6.1*/ + HB_SCRIPT_MEROITIC_HIEROGLYPHS = HB_TAG ('M','e','r','o'), /*6.1*/ + HB_SCRIPT_MIAO = HB_TAG ('P','l','r','d'), /*6.1*/ + HB_SCRIPT_SHARADA = HB_TAG ('S','h','r','d'), /*6.1*/ + HB_SCRIPT_SORA_SOMPENG = HB_TAG ('S','o','r','a'), /*6.1*/ + HB_SCRIPT_TAKRI = HB_TAG ('T','a','k','r'), /*6.1*/ + + /* + * Since: 0.9.30 + */ + HB_SCRIPT_BASSA_VAH = HB_TAG ('B','a','s','s'), /*7.0*/ + HB_SCRIPT_CAUCASIAN_ALBANIAN = HB_TAG ('A','g','h','b'), /*7.0*/ + HB_SCRIPT_DUPLOYAN = HB_TAG ('D','u','p','l'), /*7.0*/ + HB_SCRIPT_ELBASAN = HB_TAG ('E','l','b','a'), /*7.0*/ + HB_SCRIPT_GRANTHA = HB_TAG ('G','r','a','n'), /*7.0*/ + HB_SCRIPT_KHOJKI = HB_TAG ('K','h','o','j'), /*7.0*/ + HB_SCRIPT_KHUDAWADI = HB_TAG ('S','i','n','d'), /*7.0*/ + HB_SCRIPT_LINEAR_A = HB_TAG ('L','i','n','a'), /*7.0*/ + HB_SCRIPT_MAHAJANI = HB_TAG ('M','a','h','j'), /*7.0*/ + HB_SCRIPT_MANICHAEAN = HB_TAG ('M','a','n','i'), /*7.0*/ + HB_SCRIPT_MENDE_KIKAKUI = HB_TAG ('M','e','n','d'), /*7.0*/ + HB_SCRIPT_MODI = HB_TAG ('M','o','d','i'), /*7.0*/ + HB_SCRIPT_MRO = HB_TAG ('M','r','o','o'), /*7.0*/ + HB_SCRIPT_NABATAEAN = HB_TAG ('N','b','a','t'), /*7.0*/ + HB_SCRIPT_OLD_NORTH_ARABIAN = HB_TAG ('N','a','r','b'), /*7.0*/ + HB_SCRIPT_OLD_PERMIC = HB_TAG ('P','e','r','m'), /*7.0*/ + HB_SCRIPT_PAHAWH_HMONG = HB_TAG ('H','m','n','g'), /*7.0*/ + HB_SCRIPT_PALMYRENE = HB_TAG ('P','a','l','m'), /*7.0*/ + HB_SCRIPT_PAU_CIN_HAU = HB_TAG ('P','a','u','c'), /*7.0*/ + HB_SCRIPT_PSALTER_PAHLAVI = HB_TAG ('P','h','l','p'), /*7.0*/ + HB_SCRIPT_SIDDHAM = HB_TAG ('S','i','d','d'), /*7.0*/ + HB_SCRIPT_TIRHUTA = HB_TAG ('T','i','r','h'), /*7.0*/ + HB_SCRIPT_WARANG_CITI = HB_TAG ('W','a','r','a'), /*7.0*/ + + HB_SCRIPT_AHOM = HB_TAG ('A','h','o','m'), /*8.0*/ + HB_SCRIPT_ANATOLIAN_HIEROGLYPHS = HB_TAG ('H','l','u','w'), /*8.0*/ + HB_SCRIPT_HATRAN = HB_TAG ('H','a','t','r'), /*8.0*/ + HB_SCRIPT_MULTANI = HB_TAG ('M','u','l','t'), /*8.0*/ + HB_SCRIPT_OLD_HUNGARIAN = HB_TAG ('H','u','n','g'), /*8.0*/ + HB_SCRIPT_SIGNWRITING = HB_TAG ('S','g','n','w'), /*8.0*/ + + /* + * Since 1.3.0 + */ + HB_SCRIPT_ADLAM = HB_TAG ('A','d','l','m'), /*9.0*/ + HB_SCRIPT_BHAIKSUKI = HB_TAG ('B','h','k','s'), /*9.0*/ + HB_SCRIPT_MARCHEN = HB_TAG ('M','a','r','c'), /*9.0*/ + HB_SCRIPT_OSAGE = HB_TAG ('O','s','g','e'), /*9.0*/ + HB_SCRIPT_TANGUT = HB_TAG ('T','a','n','g'), /*9.0*/ + HB_SCRIPT_NEWA = HB_TAG ('N','e','w','a'), /*9.0*/ + + /* + * Since 1.6.0 + */ + HB_SCRIPT_MASARAM_GONDI = HB_TAG ('G','o','n','m'), /*10.0*/ + HB_SCRIPT_NUSHU = HB_TAG ('N','s','h','u'), /*10.0*/ + HB_SCRIPT_SOYOMBO = HB_TAG ('S','o','y','o'), /*10.0*/ + HB_SCRIPT_ZANABAZAR_SQUARE = HB_TAG ('Z','a','n','b'), /*10.0*/ + + /* + * Since 1.8.0 + */ + HB_SCRIPT_DOGRA = HB_TAG ('D','o','g','r'), /*11.0*/ + HB_SCRIPT_GUNJALA_GONDI = HB_TAG ('G','o','n','g'), /*11.0*/ + HB_SCRIPT_HANIFI_ROHINGYA = HB_TAG ('R','o','h','g'), /*11.0*/ + HB_SCRIPT_MAKASAR = HB_TAG ('M','a','k','a'), /*11.0*/ + HB_SCRIPT_MEDEFAIDRIN = HB_TAG ('M','e','d','f'), /*11.0*/ + HB_SCRIPT_OLD_SOGDIAN = HB_TAG ('S','o','g','o'), /*11.0*/ + HB_SCRIPT_SOGDIAN = HB_TAG ('S','o','g','d'), /*11.0*/ + + /* + * Since 2.4.0 + */ + HB_SCRIPT_ELYMAIC = HB_TAG ('E','l','y','m'), /*12.0*/ + HB_SCRIPT_NANDINAGARI = HB_TAG ('N','a','n','d'), /*12.0*/ + HB_SCRIPT_NYIAKENG_PUACHUE_HMONG = HB_TAG ('H','m','n','p'), /*12.0*/ + HB_SCRIPT_WANCHO = HB_TAG ('W','c','h','o'), /*12.0*/ + + /* + * Since 2.6.7 + */ + HB_SCRIPT_CHORASMIAN = HB_TAG ('C','h','r','s'), /*13.0*/ + HB_SCRIPT_DIVES_AKURU = HB_TAG ('D','i','a','k'), /*13.0*/ + HB_SCRIPT_KHITAN_SMALL_SCRIPT = HB_TAG ('K','i','t','s'), /*13.0*/ + HB_SCRIPT_YEZIDI = HB_TAG ('Y','e','z','i'), /*13.0*/ + + /* + * Since 3.0.0 + */ + HB_SCRIPT_CYPRO_MINOAN = HB_TAG ('C','p','m','n'), /*14.0*/ + HB_SCRIPT_OLD_UYGHUR = HB_TAG ('O','u','g','r'), /*14.0*/ + HB_SCRIPT_TANGSA = HB_TAG ('T','n','s','a'), /*14.0*/ + HB_SCRIPT_TOTO = HB_TAG ('T','o','t','o'), /*14.0*/ + HB_SCRIPT_VITHKUQI = HB_TAG ('V','i','t','h'), /*14.0*/ + + /* + * Since 3.4.0 + */ + HB_SCRIPT_MATH = HB_TAG ('Z','m','t','h'), + + /* + * Since 5.2.0 + */ + HB_SCRIPT_KAWI = HB_TAG ('K','a','w','i'), /*15.0*/ + HB_SCRIPT_NAG_MUNDARI = HB_TAG ('N','a','g','m'), /*15.0*/ + + /* + * Since 10.0.0 + */ + HB_SCRIPT_GARAY = HB_TAG ('G','a','r','a'), /*16.0*/ + HB_SCRIPT_GURUNG_KHEMA = HB_TAG ('G','u','k','h'), /*16.0*/ + HB_SCRIPT_KIRAT_RAI = HB_TAG ('K','r','a','i'), /*16.0*/ + HB_SCRIPT_OL_ONAL = HB_TAG ('O','n','a','o'), /*16.0*/ + HB_SCRIPT_SUNUWAR = HB_TAG ('S','u','n','u'), /*16.0*/ + HB_SCRIPT_TODHRI = HB_TAG ('T','o','d','r'), /*16.0*/ + HB_SCRIPT_TULU_TIGALARI = HB_TAG ('T','u','t','g'), /*16.0*/ + + /* No script set. */ + HB_SCRIPT_INVALID = HB_TAG_NONE, + + /*< private >*/ + + /* Dummy values to ensure any hb_tag_t value can be passed/stored as hb_script_t + * without risking undefined behavior. We have two, for historical reasons. + * HB_TAG_MAX used to be unsigned, but that was invalid Ansi C, so was changed + * to _HB_SCRIPT_MAX_VALUE to be equal to HB_TAG_MAX_SIGNED as well. + * + * See this thread for technicalities: + * + * https://lists.freedesktop.org/archives/harfbuzz/2014-March/004150.html + */ + _HB_SCRIPT_MAX_VALUE = HB_TAG_MAX_SIGNED, /*< skip >*/ + _HB_SCRIPT_MAX_VALUE_SIGNED = HB_TAG_MAX_SIGNED /*< skip >*/ + +} hb_script_t; + + +#endif /* HB_SCRIPT_LIST_H */ diff --git a/dependencies/winx64/include/harfbuzz/hb-set.h b/dependencies/winx64/include/harfbuzz/hb-set.h new file mode 100644 index 0000000..192abf6 --- /dev/null +++ b/dependencies/winx64/include/harfbuzz/hb-set.h @@ -0,0 +1,203 @@ +/* + * Copyright © 2012 Google, Inc. + * + * This is part of HarfBuzz, a text shaping library. + * + * Permission is hereby granted, without written agreement and without + * license or royalty fees, to use, copy, modify, and distribute this + * software and its documentation for any purpose, provided that the + * above copyright notice and the following two paragraphs appear in + * all copies of this software. + * + * IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE TO ANY PARTY FOR + * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES + * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN + * IF THE COPYRIGHT HOLDER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + * THE COPYRIGHT HOLDER SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, + * BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND + * FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS + * ON AN "AS IS" BASIS, AND THE COPYRIGHT HOLDER HAS NO OBLIGATION TO + * PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. + * + * Google Author(s): Behdad Esfahbod + */ + +#if !defined(HB_H_IN) && !defined(HB_NO_SINGLE_HEADER_ERROR) +#error "Include instead." +#endif + +#ifndef HB_SET_H +#define HB_SET_H + +#include "hb-common.h" + +HB_BEGIN_DECLS + + +/** + * HB_SET_VALUE_INVALID: + * + * Unset #hb_set_t value. + * + * Since: 0.9.21 + */ +#define HB_SET_VALUE_INVALID HB_CODEPOINT_INVALID + +/** + * hb_set_t: + * + * Data type for holding a set of integers. #hb_set_t's are + * used to gather and contain glyph IDs, Unicode code + * points, and various other collections of discrete + * values. + * + **/ +typedef struct hb_set_t hb_set_t; + + +HB_EXTERN hb_set_t * +hb_set_create (void); + +HB_EXTERN hb_set_t * +hb_set_get_empty (void); + +HB_EXTERN hb_set_t * +hb_set_reference (hb_set_t *set); + +HB_EXTERN void +hb_set_destroy (hb_set_t *set); + +HB_EXTERN hb_bool_t +hb_set_set_user_data (hb_set_t *set, + hb_user_data_key_t *key, + void * data, + hb_destroy_func_t destroy, + hb_bool_t replace); + +HB_EXTERN void * +hb_set_get_user_data (const hb_set_t *set, + hb_user_data_key_t *key); + + +/* Returns false if allocation has failed before */ +HB_EXTERN hb_bool_t +hb_set_allocation_successful (const hb_set_t *set); + +HB_EXTERN hb_set_t * +hb_set_copy (const hb_set_t *set); + +HB_EXTERN void +hb_set_clear (hb_set_t *set); + +HB_EXTERN hb_bool_t +hb_set_is_empty (const hb_set_t *set); + +HB_EXTERN void +hb_set_invert (hb_set_t *set); + +HB_EXTERN hb_bool_t +hb_set_is_inverted (const hb_set_t *set); + +HB_EXTERN hb_bool_t +hb_set_has (const hb_set_t *set, + hb_codepoint_t codepoint); + +HB_EXTERN void +hb_set_add (hb_set_t *set, + hb_codepoint_t codepoint); + +HB_EXTERN void +hb_set_add_range (hb_set_t *set, + hb_codepoint_t first, + hb_codepoint_t last); + +HB_EXTERN void +hb_set_add_sorted_array (hb_set_t *set, + const hb_codepoint_t *sorted_codepoints, + unsigned int num_codepoints); + +HB_EXTERN void +hb_set_del (hb_set_t *set, + hb_codepoint_t codepoint); + +HB_EXTERN void +hb_set_del_range (hb_set_t *set, + hb_codepoint_t first, + hb_codepoint_t last); + +HB_EXTERN hb_bool_t +hb_set_is_equal (const hb_set_t *set, + const hb_set_t *other); + +HB_EXTERN unsigned int +hb_set_hash (const hb_set_t *set); + +HB_EXTERN hb_bool_t +hb_set_is_subset (const hb_set_t *set, + const hb_set_t *larger_set); + +HB_EXTERN void +hb_set_set (hb_set_t *set, + const hb_set_t *other); + +HB_EXTERN void +hb_set_union (hb_set_t *set, + const hb_set_t *other); + +HB_EXTERN void +hb_set_intersect (hb_set_t *set, + const hb_set_t *other); + +HB_EXTERN void +hb_set_subtract (hb_set_t *set, + const hb_set_t *other); + +HB_EXTERN void +hb_set_symmetric_difference (hb_set_t *set, + const hb_set_t *other); + +HB_EXTERN unsigned int +hb_set_get_population (const hb_set_t *set); + +/* Returns HB_SET_VALUE_INVALID if set empty. */ +HB_EXTERN hb_codepoint_t +hb_set_get_min (const hb_set_t *set); + +/* Returns HB_SET_VALUE_INVALID if set empty. */ +HB_EXTERN hb_codepoint_t +hb_set_get_max (const hb_set_t *set); + +/* Pass HB_SET_VALUE_INVALID in to get started. */ +HB_EXTERN hb_bool_t +hb_set_next (const hb_set_t *set, + hb_codepoint_t *codepoint); + +/* Pass HB_SET_VALUE_INVALID in to get started. */ +HB_EXTERN hb_bool_t +hb_set_previous (const hb_set_t *set, + hb_codepoint_t *codepoint); + +/* Pass HB_SET_VALUE_INVALID for first and last to get started. */ +HB_EXTERN hb_bool_t +hb_set_next_range (const hb_set_t *set, + hb_codepoint_t *first, + hb_codepoint_t *last); + +/* Pass HB_SET_VALUE_INVALID for first and last to get started. */ +HB_EXTERN hb_bool_t +hb_set_previous_range (const hb_set_t *set, + hb_codepoint_t *first, + hb_codepoint_t *last); + +/* Pass HB_SET_VALUE_INVALID in to get started. */ +HB_EXTERN unsigned int +hb_set_next_many (const hb_set_t *set, + hb_codepoint_t codepoint, + hb_codepoint_t *out, + unsigned int size); + +HB_END_DECLS + +#endif /* HB_SET_H */ diff --git a/dependencies/winx64/include/harfbuzz/hb-shape-plan.h b/dependencies/winx64/include/harfbuzz/hb-shape-plan.h new file mode 100644 index 0000000..aaf5cf9 --- /dev/null +++ b/dependencies/winx64/include/harfbuzz/hb-shape-plan.h @@ -0,0 +1,122 @@ +/* + * Copyright © 2012 Google, Inc. + * + * This is part of HarfBuzz, a text shaping library. + * + * Permission is hereby granted, without written agreement and without + * license or royalty fees, to use, copy, modify, and distribute this + * software and its documentation for any purpose, provided that the + * above copyright notice and the following two paragraphs appear in + * all copies of this software. + * + * IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE TO ANY PARTY FOR + * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES + * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN + * IF THE COPYRIGHT HOLDER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + * THE COPYRIGHT HOLDER SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, + * BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND + * FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS + * ON AN "AS IS" BASIS, AND THE COPYRIGHT HOLDER HAS NO OBLIGATION TO + * PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. + * + * Google Author(s): Behdad Esfahbod + */ + +#if !defined(HB_H_IN) && !defined(HB_NO_SINGLE_HEADER_ERROR) +#error "Include instead." +#endif + +#ifndef HB_SHAPE_PLAN_H +#define HB_SHAPE_PLAN_H + +#include "hb-common.h" +#include "hb-font.h" + +HB_BEGIN_DECLS + +/** + * hb_shape_plan_t: + * + * Data type for holding a shaping plan. + * + * Shape plans contain information about how HarfBuzz will shape a + * particular text segment, based on the segment's properties and the + * capabilities in the font face in use. + * + * Shape plans can be queried about how shaping will perform, given a set + * of specific input parameters (script, language, direction, features, + * etc.). + * + **/ +typedef struct hb_shape_plan_t hb_shape_plan_t; + +HB_EXTERN hb_shape_plan_t * +hb_shape_plan_create (hb_face_t *face, + const hb_segment_properties_t *props, + const hb_feature_t *user_features, + unsigned int num_user_features, + const char * const *shaper_list); + +HB_EXTERN hb_shape_plan_t * +hb_shape_plan_create_cached (hb_face_t *face, + const hb_segment_properties_t *props, + const hb_feature_t *user_features, + unsigned int num_user_features, + const char * const *shaper_list); + +HB_EXTERN hb_shape_plan_t * +hb_shape_plan_create2 (hb_face_t *face, + const hb_segment_properties_t *props, + const hb_feature_t *user_features, + unsigned int num_user_features, + const int *coords, + unsigned int num_coords, + const char * const *shaper_list); + +HB_EXTERN hb_shape_plan_t * +hb_shape_plan_create_cached2 (hb_face_t *face, + const hb_segment_properties_t *props, + const hb_feature_t *user_features, + unsigned int num_user_features, + const int *coords, + unsigned int num_coords, + const char * const *shaper_list); + + +HB_EXTERN hb_shape_plan_t * +hb_shape_plan_get_empty (void); + +HB_EXTERN hb_shape_plan_t * +hb_shape_plan_reference (hb_shape_plan_t *shape_plan); + +HB_EXTERN void +hb_shape_plan_destroy (hb_shape_plan_t *shape_plan); + +HB_EXTERN hb_bool_t +hb_shape_plan_set_user_data (hb_shape_plan_t *shape_plan, + hb_user_data_key_t *key, + void * data, + hb_destroy_func_t destroy, + hb_bool_t replace); + +HB_EXTERN void * +hb_shape_plan_get_user_data (const hb_shape_plan_t *shape_plan, + hb_user_data_key_t *key); + + +HB_EXTERN hb_bool_t +hb_shape_plan_execute (hb_shape_plan_t *shape_plan, + hb_font_t *font, + hb_buffer_t *buffer, + const hb_feature_t *features, + unsigned int num_features); + +HB_EXTERN const char * +hb_shape_plan_get_shaper (hb_shape_plan_t *shape_plan); + + +HB_END_DECLS + +#endif /* HB_SHAPE_PLAN_H */ diff --git a/dependencies/winx64/include/harfbuzz/hb-shape.h b/dependencies/winx64/include/harfbuzz/hb-shape.h new file mode 100644 index 0000000..b09bf05 --- /dev/null +++ b/dependencies/winx64/include/harfbuzz/hb-shape.h @@ -0,0 +1,76 @@ +/* + * Copyright © 2009 Red Hat, Inc. + * Copyright © 2012 Google, Inc. + * + * This is part of HarfBuzz, a text shaping library. + * + * Permission is hereby granted, without written agreement and without + * license or royalty fees, to use, copy, modify, and distribute this + * software and its documentation for any purpose, provided that the + * above copyright notice and the following two paragraphs appear in + * all copies of this software. + * + * IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE TO ANY PARTY FOR + * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES + * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN + * IF THE COPYRIGHT HOLDER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + * THE COPYRIGHT HOLDER SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, + * BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND + * FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS + * ON AN "AS IS" BASIS, AND THE COPYRIGHT HOLDER HAS NO OBLIGATION TO + * PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. + * + * Red Hat Author(s): Behdad Esfahbod + * Google Author(s): Behdad Esfahbod + */ + +#if !defined(HB_H_IN) && !defined(HB_NO_SINGLE_HEADER_ERROR) +#error "Include instead." +#endif + +#ifndef HB_SHAPE_H +#define HB_SHAPE_H + +#include "hb-common.h" +#include "hb-buffer.h" +#include "hb-font.h" + +HB_BEGIN_DECLS + + +HB_EXTERN void +hb_shape (hb_font_t *font, + hb_buffer_t *buffer, + const hb_feature_t *features, + unsigned int num_features); + +HB_EXTERN hb_bool_t +hb_shape_full (hb_font_t *font, + hb_buffer_t *buffer, + const hb_feature_t *features, + unsigned int num_features, + const char * const *shaper_list); + +#ifdef HB_EXPERIMENTAL_API +HB_EXTERN hb_bool_t +hb_shape_justify (hb_font_t *font, + hb_buffer_t *buffer, + const hb_feature_t *features, + unsigned int num_features, + const char * const *shaper_list, + float min_target_advance, + float max_target_advance, + float *advance, /* IN/OUT */ + hb_tag_t *var_tag, /* OUT */ + float *var_value /* OUT */); +#endif + +HB_EXTERN const char ** +hb_shape_list_shapers (void); + + +HB_END_DECLS + +#endif /* HB_SHAPE_H */ diff --git a/dependencies/winx64/include/harfbuzz/hb-style.h b/dependencies/winx64/include/harfbuzz/hb-style.h new file mode 100644 index 0000000..d17d2da --- /dev/null +++ b/dependencies/winx64/include/harfbuzz/hb-style.h @@ -0,0 +1,81 @@ +/* + * Copyright © 2019 Ebrahim Byagowi + * + * This is part of HarfBuzz, a text shaping library. + * + * Permission is hereby granted, without written agreement and without + * license or royalty fees, to use, copy, modify, and distribute this + * software and its documentation for any purpose, provided that the + * above copyright notice and the following two paragraphs appear in + * all copies of this software. + * + * IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE TO ANY PARTY FOR + * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES + * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN + * IF THE COPYRIGHT HOLDER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + * THE COPYRIGHT HOLDER SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, + * BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND + * FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS + * ON AN "AS IS" BASIS, AND THE COPYRIGHT HOLDER HAS NO OBLIGATION TO + * PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. + */ + +#if !defined(HB_H_IN) && !defined(HB_NO_SINGLE_HEADER_ERROR) +#error "Include instead." +#endif + +#ifndef HB_STYLE_H +#define HB_STYLE_H + +#include "hb.h" + +HB_BEGIN_DECLS + +/** + * hb_style_tag_t: + * @HB_STYLE_TAG_ITALIC: Used to vary between non-italic and italic. + * A value of 0 can be interpreted as "Roman" (non-italic); a value of 1 can + * be interpreted as (fully) italic. + * @HB_STYLE_TAG_OPTICAL_SIZE: Used to vary design to suit different text sizes. + * Non-zero. Values can be interpreted as text size, in points. + * @HB_STYLE_TAG_SLANT_ANGLE: Used to vary between upright and slanted text. Values + * must be greater than -90 and less than +90. Values can be interpreted as + * the angle, in counter-clockwise degrees, of oblique slant from whatever the + * designer considers to be upright for that font design. Typical right-leaning + * Italic fonts have a negative slant angle (typically around -12) + * @HB_STYLE_TAG_SLANT_RATIO: same as @HB_STYLE_TAG_SLANT_ANGLE expression as ratio. + * Typical right-leaning Italic fonts have a positive slant ratio (typically around 0.2) + * @HB_STYLE_TAG_WIDTH: Used to vary width of text from narrower to wider. + * Non-zero. Values can be interpreted as a percentage of whatever the font + * designer considers “normal width” for that font design. + * @HB_STYLE_TAG_WEIGHT: Used to vary stroke thicknesses or other design details + * to give variation from lighter to blacker. Values can be interpreted in direct + * comparison to values for usWeightClass in the OS/2 table, + * or the CSS font-weight property. + * + * Defined by [OpenType Design-Variation Axis Tag Registry](https://docs.microsoft.com/en-us/typography/opentype/spec/dvaraxisreg). + * + * Since: 3.0.0 + **/ +typedef enum +{ + HB_STYLE_TAG_ITALIC = HB_TAG ('i','t','a','l'), + HB_STYLE_TAG_OPTICAL_SIZE = HB_TAG ('o','p','s','z'), + HB_STYLE_TAG_SLANT_ANGLE = HB_TAG ('s','l','n','t'), + HB_STYLE_TAG_SLANT_RATIO = HB_TAG ('S','l','n','t'), + HB_STYLE_TAG_WIDTH = HB_TAG ('w','d','t','h'), + HB_STYLE_TAG_WEIGHT = HB_TAG ('w','g','h','t'), + + /*< private >*/ + _HB_STYLE_TAG_MAX_VALUE = HB_TAG_MAX_SIGNED /*< skip >*/ +} hb_style_tag_t; + + +HB_EXTERN float +hb_style_get_value (hb_font_t *font, hb_style_tag_t style_tag); + +HB_END_DECLS + +#endif /* HB_STYLE_H */ diff --git a/dependencies/winx64/include/harfbuzz/hb-subset-serialize.h b/dependencies/winx64/include/harfbuzz/hb-subset-serialize.h new file mode 100644 index 0000000..9035d4c --- /dev/null +++ b/dependencies/winx64/include/harfbuzz/hb-subset-serialize.h @@ -0,0 +1,83 @@ +/* + * Copyright © 2022 Google, Inc. + * + * This is part of HarfBuzz, a text shaping library. + * + * Permission is hereby granted, without written agreement and without + * license or royalty fees, to use, copy, modify, and distribute this + * software and its documentation for any purpose, provided that the + * above copyright notice and the following two paragraphs appear in + * all copies of this software. + * + * IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE TO ANY PARTY FOR + * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES + * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN + * IF THE COPYRIGHT HOLDER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + * THE COPYRIGHT HOLDER SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, + * BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND + * FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS + * ON AN "AS IS" BASIS, AND THE COPYRIGHT HOLDER HAS NO OBLIGATION TO + * PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. + * + */ + +#ifndef HB_SUBSET_SERIALIZE_H +#define HB_SUBSET_SERIALIZE_H + +#include "hb.h" + +HB_BEGIN_DECLS + +/** + * hb_subset_serialize_link_t: + * @width: offsetSize in bytes + * @position: position of the offset field in bytes from + * beginning of subtable + * @objidx: index of subtable + * + * Represents a link between two objects in the object graph + * to be serialized. + * + * Since: 10.2.0 + */ +typedef struct hb_subset_serialize_link_t { + unsigned int width; + unsigned int position; + unsigned int objidx; +} hb_subset_serialize_link_t; + +/** + * hb_subset_serialize_object_t: + * @head: start of object data + * @tail: end of object data + * @num_real_links: number of offset field in the object + * @real_links: array of offset info + * @num_virtual_links: number of objects that must be packed + * after current object in the final + * serialized order + * @virtual_links: array of virtual link info + * + * Represents an object in the object graph to be serialized. + * + * Since: 10.2.0 + */ +typedef struct hb_subset_serialize_object_t { + char *head; + char *tail; + unsigned int num_real_links; + hb_subset_serialize_link_t *real_links; + unsigned int num_virtual_links; + hb_subset_serialize_link_t *virtual_links; +} hb_subset_serialize_object_t; + +HB_EXTERN hb_blob_t * +hb_subset_serialize_or_fail (hb_tag_t table_tag, + hb_subset_serialize_object_t *hb_objects, + unsigned num_hb_objs); + + +HB_END_DECLS + +#endif /* HB_SUBSET_SERIALIZE_H */ diff --git a/dependencies/winx64/include/harfbuzz/hb-subset.h b/dependencies/winx64/include/harfbuzz/hb-subset.h new file mode 100644 index 0000000..374035d --- /dev/null +++ b/dependencies/winx64/include/harfbuzz/hb-subset.h @@ -0,0 +1,292 @@ +/* + * Copyright © 2018 Google, Inc. + * + * This is part of HarfBuzz, a text shaping library. + * + * Permission is hereby granted, without written agreement and without + * license or royalty fees, to use, copy, modify, and distribute this + * software and its documentation for any purpose, provided that the + * above copyright notice and the following two paragraphs appear in + * all copies of this software. + * + * IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE TO ANY PARTY FOR + * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES + * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN + * IF THE COPYRIGHT HOLDER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + * THE COPYRIGHT HOLDER SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, + * BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND + * FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS + * ON AN "AS IS" BASIS, AND THE COPYRIGHT HOLDER HAS NO OBLIGATION TO + * PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. + * + * Google Author(s): Rod Sheeter + */ + +#ifndef HB_SUBSET_H +#define HB_SUBSET_H + +#include "hb.h" +#include "hb-ot.h" + +HB_BEGIN_DECLS + +/** + * hb_subset_input_t: + * + * Things that change based on the input. Characters to keep, etc. + */ + +typedef struct hb_subset_input_t hb_subset_input_t; + +/** + * hb_subset_plan_t: + * + * Contains information about how the subset operation will be executed. + * Such as mappings from the old glyph ids to the new ones in the subset. + */ + +typedef struct hb_subset_plan_t hb_subset_plan_t; + +/** + * hb_subset_flags_t: + * @HB_SUBSET_FLAGS_DEFAULT: all flags at their default value of false. + * @HB_SUBSET_FLAGS_NO_HINTING: If set hinting instructions will be dropped in + * the produced subset. Otherwise hinting instructions will be retained. + * @HB_SUBSET_FLAGS_RETAIN_GIDS: If set glyph indices will not be modified in + * the produced subset. If glyphs are dropped their indices will be retained + * as an empty glyph. + * @HB_SUBSET_FLAGS_DESUBROUTINIZE: If set and subsetting a CFF font the + * subsetter will attempt to remove subroutines from the CFF glyphs. + * @HB_SUBSET_FLAGS_NAME_LEGACY: If set non-unicode name records will be + * retained in the subset. + * @HB_SUBSET_FLAGS_SET_OVERLAPS_FLAG: If set the subsetter will set the + * OVERLAP_SIMPLE flag on each simple glyph. + * @HB_SUBSET_FLAGS_PASSTHROUGH_UNRECOGNIZED: If set the subsetter will not + * drop unrecognized tables and instead pass them through untouched. + * @HB_SUBSET_FLAGS_NOTDEF_OUTLINE: If set the notdef glyph outline will be + * retained in the final subset. + * @HB_SUBSET_FLAGS_GLYPH_NAMES: If set the PS glyph names will be retained + * in the final subset. + * @HB_SUBSET_FLAGS_NO_PRUNE_UNICODE_RANGES: If set then the unicode ranges in + * OS/2 will not be recalculated. + * @HB_SUBSET_FLAGS_NO_LAYOUT_CLOSURE: If set do not perform glyph closure on layout + * substitution rules (GSUB). Since: 7.2.0. + * @HB_SUBSET_FLAGS_OPTIMIZE_IUP_DELTAS: If set perform IUP delta optimization on the + * remaining gvar table's deltas. Since: 8.5.0 + * @HB_SUBSET_FLAGS_NO_BIDI_CLOSURE: If set do not pull mirrored versions of input + * codepoints into the subset. Since: 11.1.0 + * @HB_SUBSET_FLAGS_IFTB_REQUIREMENTS: If set enforce requirements on the output subset + * to allow it to be used with incremental font transfer IFTB patches. Primarily, + * this forces all outline data to use long (32 bit) offsets. Since: EXPERIMENTAL + * + * List of boolean properties that can be configured on the subset input. + * + * Since: 2.9.0 + **/ +typedef enum { /*< flags >*/ + HB_SUBSET_FLAGS_DEFAULT = 0x00000000u, + HB_SUBSET_FLAGS_NO_HINTING = 0x00000001u, + HB_SUBSET_FLAGS_RETAIN_GIDS = 0x00000002u, + HB_SUBSET_FLAGS_DESUBROUTINIZE = 0x00000004u, + HB_SUBSET_FLAGS_NAME_LEGACY = 0x00000008u, + HB_SUBSET_FLAGS_SET_OVERLAPS_FLAG = 0x00000010u, + HB_SUBSET_FLAGS_PASSTHROUGH_UNRECOGNIZED = 0x00000020u, + HB_SUBSET_FLAGS_NOTDEF_OUTLINE = 0x00000040u, + HB_SUBSET_FLAGS_GLYPH_NAMES = 0x00000080u, + HB_SUBSET_FLAGS_NO_PRUNE_UNICODE_RANGES = 0x00000100u, + HB_SUBSET_FLAGS_NO_LAYOUT_CLOSURE = 0x00000200u, + HB_SUBSET_FLAGS_OPTIMIZE_IUP_DELTAS = 0x00000400u, + HB_SUBSET_FLAGS_NO_BIDI_CLOSURE = 0x00000800u, +#ifdef HB_EXPERIMENTAL_API + HB_SUBSET_FLAGS_IFTB_REQUIREMENTS = 0x00001000u, +#endif +} hb_subset_flags_t; + +/** + * hb_subset_sets_t: + * @HB_SUBSET_SETS_GLYPH_INDEX: the set of glyph indexes to retain in the subset. + * @HB_SUBSET_SETS_UNICODE: the set of unicode codepoints to retain in the subset. + * @HB_SUBSET_SETS_NO_SUBSET_TABLE_TAG: the set of table tags which specifies tables that should not be + * subsetted. + * @HB_SUBSET_SETS_DROP_TABLE_TAG: the set of table tags which specifies tables which will be dropped + * in the subset. + * @HB_SUBSET_SETS_NAME_ID: the set of name ids that will be retained. + * @HB_SUBSET_SETS_NAME_LANG_ID: the set of name lang ids that will be retained. + * @HB_SUBSET_SETS_LAYOUT_FEATURE_TAG: the set of layout feature tags that will be retained + * in the subset. + * @HB_SUBSET_SETS_LAYOUT_SCRIPT_TAG: the set of layout script tags that will be retained + * in the subset. Defaults to all tags. Since: 5.0.0 + * + * List of sets that can be configured on the subset input. + * + * Since: 2.9.1 + **/ +typedef enum { + HB_SUBSET_SETS_GLYPH_INDEX = 0, + HB_SUBSET_SETS_UNICODE, + HB_SUBSET_SETS_NO_SUBSET_TABLE_TAG, + HB_SUBSET_SETS_DROP_TABLE_TAG, + HB_SUBSET_SETS_NAME_ID, + HB_SUBSET_SETS_NAME_LANG_ID, + HB_SUBSET_SETS_LAYOUT_FEATURE_TAG, + HB_SUBSET_SETS_LAYOUT_SCRIPT_TAG, +} hb_subset_sets_t; + +HB_EXTERN hb_subset_input_t * +hb_subset_input_create_or_fail (void); + +HB_EXTERN hb_subset_input_t * +hb_subset_input_reference (hb_subset_input_t *input); + +HB_EXTERN void +hb_subset_input_destroy (hb_subset_input_t *input); + +HB_EXTERN hb_bool_t +hb_subset_input_set_user_data (hb_subset_input_t *input, + hb_user_data_key_t *key, + void * data, + hb_destroy_func_t destroy, + hb_bool_t replace); + +HB_EXTERN void * +hb_subset_input_get_user_data (const hb_subset_input_t *input, + hb_user_data_key_t *key); + +HB_EXTERN void +hb_subset_input_keep_everything (hb_subset_input_t *input); + +HB_EXTERN hb_set_t * +hb_subset_input_unicode_set (hb_subset_input_t *input); + +HB_EXTERN hb_set_t * +hb_subset_input_glyph_set (hb_subset_input_t *input); + +HB_EXTERN hb_set_t * +hb_subset_input_set (hb_subset_input_t *input, hb_subset_sets_t set_type); + +HB_EXTERN hb_map_t* +hb_subset_input_old_to_new_glyph_mapping (hb_subset_input_t *input); + +HB_EXTERN hb_subset_flags_t +hb_subset_input_get_flags (hb_subset_input_t *input); + +HB_EXTERN void +hb_subset_input_set_flags (hb_subset_input_t *input, + unsigned value); + +HB_EXTERN hb_bool_t +hb_subset_input_pin_all_axes_to_default (hb_subset_input_t *input, + hb_face_t *face); + +HB_EXTERN hb_bool_t +hb_subset_input_pin_axis_to_default (hb_subset_input_t *input, + hb_face_t *face, + hb_tag_t axis_tag); + +HB_EXTERN hb_bool_t +hb_subset_input_pin_axis_location (hb_subset_input_t *input, + hb_face_t *face, + hb_tag_t axis_tag, + float axis_value); + +HB_EXTERN hb_bool_t +hb_subset_input_get_axis_range (hb_subset_input_t *input, + hb_tag_t axis_tag, + float *axis_min_value, + float *axis_max_value, + float *axis_def_value); + +HB_EXTERN hb_bool_t +hb_subset_input_set_axis_range (hb_subset_input_t *input, + hb_face_t *face, + hb_tag_t axis_tag, + float axis_min_value, + float axis_max_value, + float axis_def_value); + +HB_EXTERN hb_bool_t +hb_subset_axis_range_from_string (const char *str, int len, + float *axis_min_value, + float *axis_max_value, + float *axis_def_value); + +HB_EXTERN void +hb_subset_axis_range_to_string (hb_subset_input_t *input, + hb_tag_t axis_tag, + char *buf, + unsigned size); + +#ifdef HB_EXPERIMENTAL_API +HB_EXTERN hb_bool_t +hb_subset_input_override_name_table (hb_subset_input_t *input, + hb_ot_name_id_t name_id, + unsigned platform_id, + unsigned encoding_id, + unsigned language_id, + const char *name_str, + int str_len); + + +/* +* Raw outline data access +*/ + +HB_EXTERN hb_blob_t* +hb_subset_cff_get_charstring_data (hb_face_t* face, hb_codepoint_t glyph_index); + +HB_EXTERN hb_blob_t* +hb_subset_cff_get_charstrings_index (hb_face_t* face); + +HB_EXTERN hb_blob_t* +hb_subset_cff2_get_charstring_data (hb_face_t* face, hb_codepoint_t glyph_index); + +HB_EXTERN hb_blob_t* +hb_subset_cff2_get_charstrings_index (hb_face_t* face); +#endif + +HB_EXTERN hb_face_t * +hb_subset_preprocess (hb_face_t *source); + +HB_EXTERN hb_face_t * +hb_subset_or_fail (hb_face_t *source, const hb_subset_input_t *input); + +HB_EXTERN hb_face_t * +hb_subset_plan_execute_or_fail (hb_subset_plan_t *plan); + +HB_EXTERN hb_subset_plan_t * +hb_subset_plan_create_or_fail (hb_face_t *face, + const hb_subset_input_t *input); + +HB_EXTERN void +hb_subset_plan_destroy (hb_subset_plan_t *plan); + +HB_EXTERN hb_map_t * +hb_subset_plan_old_to_new_glyph_mapping (const hb_subset_plan_t *plan); + +HB_EXTERN hb_map_t * +hb_subset_plan_new_to_old_glyph_mapping (const hb_subset_plan_t *plan); + +HB_EXTERN hb_map_t * +hb_subset_plan_unicode_to_old_glyph_mapping (const hb_subset_plan_t *plan); + + +HB_EXTERN hb_subset_plan_t * +hb_subset_plan_reference (hb_subset_plan_t *plan); + +HB_EXTERN hb_bool_t +hb_subset_plan_set_user_data (hb_subset_plan_t *plan, + hb_user_data_key_t *key, + void *data, + hb_destroy_func_t destroy, + hb_bool_t replace); + +HB_EXTERN void * +hb_subset_plan_get_user_data (const hb_subset_plan_t *plan, + hb_user_data_key_t *key); + + +HB_END_DECLS + +#endif /* HB_SUBSET_H */ diff --git a/dependencies/winx64/include/harfbuzz/hb-unicode.h b/dependencies/winx64/include/harfbuzz/hb-unicode.h new file mode 100644 index 0000000..5b5c45c --- /dev/null +++ b/dependencies/winx64/include/harfbuzz/hb-unicode.h @@ -0,0 +1,643 @@ +/* + * Copyright © 2009 Red Hat, Inc. + * Copyright © 2011 Codethink Limited + * Copyright © 2011,2012 Google, Inc. + * + * This is part of HarfBuzz, a text shaping library. + * + * Permission is hereby granted, without written agreement and without + * license or royalty fees, to use, copy, modify, and distribute this + * software and its documentation for any purpose, provided that the + * above copyright notice and the following two paragraphs appear in + * all copies of this software. + * + * IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE TO ANY PARTY FOR + * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES + * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN + * IF THE COPYRIGHT HOLDER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + * THE COPYRIGHT HOLDER SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, + * BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND + * FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS + * ON AN "AS IS" BASIS, AND THE COPYRIGHT HOLDER HAS NO OBLIGATION TO + * PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. + * + * Red Hat Author(s): Behdad Esfahbod + * Codethink Author(s): Ryan Lortie + * Google Author(s): Behdad Esfahbod + */ + +#if !defined(HB_H_IN) && !defined(HB_NO_SINGLE_HEADER_ERROR) +#error "Include instead." +#endif + +#ifndef HB_UNICODE_H +#define HB_UNICODE_H + +#include "hb-common.h" + +HB_BEGIN_DECLS + + +/** + * HB_UNICODE_MAX: + * + * Maximum valid Unicode code point. + * + * Since: 1.9.0 + **/ +#define HB_UNICODE_MAX 0x10FFFFu + + +/** + * hb_unicode_general_category_t: + * @HB_UNICODE_GENERAL_CATEGORY_CONTROL: [Cc] + * @HB_UNICODE_GENERAL_CATEGORY_FORMAT: [Cf] + * @HB_UNICODE_GENERAL_CATEGORY_UNASSIGNED: [Cn] + * @HB_UNICODE_GENERAL_CATEGORY_PRIVATE_USE: [Co] + * @HB_UNICODE_GENERAL_CATEGORY_SURROGATE: [Cs] + * @HB_UNICODE_GENERAL_CATEGORY_LOWERCASE_LETTER: [Ll] + * @HB_UNICODE_GENERAL_CATEGORY_MODIFIER_LETTER: [Lm] + * @HB_UNICODE_GENERAL_CATEGORY_OTHER_LETTER: [Lo] + * @HB_UNICODE_GENERAL_CATEGORY_TITLECASE_LETTER: [Lt] + * @HB_UNICODE_GENERAL_CATEGORY_UPPERCASE_LETTER: [Lu] + * @HB_UNICODE_GENERAL_CATEGORY_SPACING_MARK: [Mc] + * @HB_UNICODE_GENERAL_CATEGORY_ENCLOSING_MARK: [Me] + * @HB_UNICODE_GENERAL_CATEGORY_NON_SPACING_MARK: [Mn] + * @HB_UNICODE_GENERAL_CATEGORY_DECIMAL_NUMBER: [Nd] + * @HB_UNICODE_GENERAL_CATEGORY_LETTER_NUMBER: [Nl] + * @HB_UNICODE_GENERAL_CATEGORY_OTHER_NUMBER: [No] + * @HB_UNICODE_GENERAL_CATEGORY_CONNECT_PUNCTUATION: [Pc] + * @HB_UNICODE_GENERAL_CATEGORY_DASH_PUNCTUATION: [Pd] + * @HB_UNICODE_GENERAL_CATEGORY_CLOSE_PUNCTUATION: [Pe] + * @HB_UNICODE_GENERAL_CATEGORY_FINAL_PUNCTUATION: [Pf] + * @HB_UNICODE_GENERAL_CATEGORY_INITIAL_PUNCTUATION: [Pi] + * @HB_UNICODE_GENERAL_CATEGORY_OTHER_PUNCTUATION: [Po] + * @HB_UNICODE_GENERAL_CATEGORY_OPEN_PUNCTUATION: [Ps] + * @HB_UNICODE_GENERAL_CATEGORY_CURRENCY_SYMBOL: [Sc] + * @HB_UNICODE_GENERAL_CATEGORY_MODIFIER_SYMBOL: [Sk] + * @HB_UNICODE_GENERAL_CATEGORY_MATH_SYMBOL: [Sm] + * @HB_UNICODE_GENERAL_CATEGORY_OTHER_SYMBOL: [So] + * @HB_UNICODE_GENERAL_CATEGORY_LINE_SEPARATOR: [Zl] + * @HB_UNICODE_GENERAL_CATEGORY_PARAGRAPH_SEPARATOR: [Zp] + * @HB_UNICODE_GENERAL_CATEGORY_SPACE_SEPARATOR: [Zs] + * + * Data type for the "General_Category" (gc) property from + * the Unicode Character Database. + **/ + +/* Unicode Character Database property: General_Category (gc) */ +typedef enum +{ + HB_UNICODE_GENERAL_CATEGORY_CONTROL, /* Cc */ + HB_UNICODE_GENERAL_CATEGORY_FORMAT, /* Cf */ + HB_UNICODE_GENERAL_CATEGORY_UNASSIGNED, /* Cn */ + HB_UNICODE_GENERAL_CATEGORY_PRIVATE_USE, /* Co */ + HB_UNICODE_GENERAL_CATEGORY_SURROGATE, /* Cs */ + HB_UNICODE_GENERAL_CATEGORY_LOWERCASE_LETTER, /* Ll */ + HB_UNICODE_GENERAL_CATEGORY_MODIFIER_LETTER, /* Lm */ + HB_UNICODE_GENERAL_CATEGORY_OTHER_LETTER, /* Lo */ + HB_UNICODE_GENERAL_CATEGORY_TITLECASE_LETTER, /* Lt */ + HB_UNICODE_GENERAL_CATEGORY_UPPERCASE_LETTER, /* Lu */ + HB_UNICODE_GENERAL_CATEGORY_SPACING_MARK, /* Mc */ + HB_UNICODE_GENERAL_CATEGORY_ENCLOSING_MARK, /* Me */ + HB_UNICODE_GENERAL_CATEGORY_NON_SPACING_MARK, /* Mn */ + HB_UNICODE_GENERAL_CATEGORY_DECIMAL_NUMBER, /* Nd */ + HB_UNICODE_GENERAL_CATEGORY_LETTER_NUMBER, /* Nl */ + HB_UNICODE_GENERAL_CATEGORY_OTHER_NUMBER, /* No */ + HB_UNICODE_GENERAL_CATEGORY_CONNECT_PUNCTUATION, /* Pc */ + HB_UNICODE_GENERAL_CATEGORY_DASH_PUNCTUATION, /* Pd */ + HB_UNICODE_GENERAL_CATEGORY_CLOSE_PUNCTUATION, /* Pe */ + HB_UNICODE_GENERAL_CATEGORY_FINAL_PUNCTUATION, /* Pf */ + HB_UNICODE_GENERAL_CATEGORY_INITIAL_PUNCTUATION, /* Pi */ + HB_UNICODE_GENERAL_CATEGORY_OTHER_PUNCTUATION, /* Po */ + HB_UNICODE_GENERAL_CATEGORY_OPEN_PUNCTUATION, /* Ps */ + HB_UNICODE_GENERAL_CATEGORY_CURRENCY_SYMBOL, /* Sc */ + HB_UNICODE_GENERAL_CATEGORY_MODIFIER_SYMBOL, /* Sk */ + HB_UNICODE_GENERAL_CATEGORY_MATH_SYMBOL, /* Sm */ + HB_UNICODE_GENERAL_CATEGORY_OTHER_SYMBOL, /* So */ + HB_UNICODE_GENERAL_CATEGORY_LINE_SEPARATOR, /* Zl */ + HB_UNICODE_GENERAL_CATEGORY_PARAGRAPH_SEPARATOR, /* Zp */ + HB_UNICODE_GENERAL_CATEGORY_SPACE_SEPARATOR /* Zs */ +} hb_unicode_general_category_t; + +/** + * hb_unicode_combining_class_t: + * @HB_UNICODE_COMBINING_CLASS_NOT_REORDERED: Spacing and enclosing marks; also many vowel and consonant signs, even if nonspacing + * @HB_UNICODE_COMBINING_CLASS_OVERLAY: Marks which overlay a base letter or symbol + * @HB_UNICODE_COMBINING_CLASS_NUKTA: Diacritic nukta marks in Brahmi-derived scripts + * @HB_UNICODE_COMBINING_CLASS_KANA_VOICING: Hiragana/Katakana voicing marks + * @HB_UNICODE_COMBINING_CLASS_VIRAMA: Viramas + * @HB_UNICODE_COMBINING_CLASS_CCC10: [Hebrew] + * @HB_UNICODE_COMBINING_CLASS_CCC11: [Hebrew] + * @HB_UNICODE_COMBINING_CLASS_CCC12: [Hebrew] + * @HB_UNICODE_COMBINING_CLASS_CCC13: [Hebrew] + * @HB_UNICODE_COMBINING_CLASS_CCC14: [Hebrew] + * @HB_UNICODE_COMBINING_CLASS_CCC15: [Hebrew] + * @HB_UNICODE_COMBINING_CLASS_CCC16: [Hebrew] + * @HB_UNICODE_COMBINING_CLASS_CCC17: [Hebrew] + * @HB_UNICODE_COMBINING_CLASS_CCC18: [Hebrew] + * @HB_UNICODE_COMBINING_CLASS_CCC19: [Hebrew] + * @HB_UNICODE_COMBINING_CLASS_CCC20: [Hebrew] + * @HB_UNICODE_COMBINING_CLASS_CCC21: [Hebrew] + * @HB_UNICODE_COMBINING_CLASS_CCC22: [Hebrew] + * @HB_UNICODE_COMBINING_CLASS_CCC23: [Hebrew] + * @HB_UNICODE_COMBINING_CLASS_CCC24: [Hebrew] + * @HB_UNICODE_COMBINING_CLASS_CCC25: [Hebrew] + * @HB_UNICODE_COMBINING_CLASS_CCC26: [Hebrew] + * @HB_UNICODE_COMBINING_CLASS_CCC27: [Arabic] + * @HB_UNICODE_COMBINING_CLASS_CCC28: [Arabic] + * @HB_UNICODE_COMBINING_CLASS_CCC29: [Arabic] + * @HB_UNICODE_COMBINING_CLASS_CCC30: [Arabic] + * @HB_UNICODE_COMBINING_CLASS_CCC31: [Arabic] + * @HB_UNICODE_COMBINING_CLASS_CCC32: [Arabic] + * @HB_UNICODE_COMBINING_CLASS_CCC33: [Arabic] + * @HB_UNICODE_COMBINING_CLASS_CCC34: [Arabic] + * @HB_UNICODE_COMBINING_CLASS_CCC35: [Arabic] + * @HB_UNICODE_COMBINING_CLASS_CCC36: [Syriac] + * @HB_UNICODE_COMBINING_CLASS_CCC84: [Telugu] + * @HB_UNICODE_COMBINING_CLASS_CCC91: [Telugu] + * @HB_UNICODE_COMBINING_CLASS_CCC103: [Thai] + * @HB_UNICODE_COMBINING_CLASS_CCC107: [Thai] + * @HB_UNICODE_COMBINING_CLASS_CCC118: [Lao] + * @HB_UNICODE_COMBINING_CLASS_CCC122: [Lao] + * @HB_UNICODE_COMBINING_CLASS_CCC129: [Tibetan] + * @HB_UNICODE_COMBINING_CLASS_CCC130: [Tibetan] + * @HB_UNICODE_COMBINING_CLASS_CCC132: [Tibetan] Since: 7.2.0 + * @HB_UNICODE_COMBINING_CLASS_ATTACHED_BELOW_LEFT: Marks attached at the bottom left + * @HB_UNICODE_COMBINING_CLASS_ATTACHED_BELOW: Marks attached directly below + * @HB_UNICODE_COMBINING_CLASS_ATTACHED_ABOVE: Marks attached directly above + * @HB_UNICODE_COMBINING_CLASS_ATTACHED_ABOVE_RIGHT: Marks attached at the top right + * @HB_UNICODE_COMBINING_CLASS_BELOW_LEFT: Distinct marks at the bottom left + * @HB_UNICODE_COMBINING_CLASS_BELOW: Distinct marks directly below + * @HB_UNICODE_COMBINING_CLASS_BELOW_RIGHT: Distinct marks at the bottom right + * @HB_UNICODE_COMBINING_CLASS_LEFT: Distinct marks to the left + * @HB_UNICODE_COMBINING_CLASS_RIGHT: Distinct marks to the right + * @HB_UNICODE_COMBINING_CLASS_ABOVE_LEFT: Distinct marks at the top left + * @HB_UNICODE_COMBINING_CLASS_ABOVE: Distinct marks directly above + * @HB_UNICODE_COMBINING_CLASS_ABOVE_RIGHT: Distinct marks at the top right + * @HB_UNICODE_COMBINING_CLASS_DOUBLE_BELOW: Distinct marks subtending two bases + * @HB_UNICODE_COMBINING_CLASS_DOUBLE_ABOVE: Distinct marks extending above two bases + * @HB_UNICODE_COMBINING_CLASS_IOTA_SUBSCRIPT: Greek iota subscript only + * @HB_UNICODE_COMBINING_CLASS_INVALID: Invalid combining class + * + * Data type for the Canonical_Combining_Class (ccc) property + * from the Unicode Character Database. + * + * Note: newer versions of Unicode may add new values. + * Client programs should be ready to handle any value in the 0..254 range + * being returned from hb_unicode_combining_class(). + * + **/ +typedef enum +{ + HB_UNICODE_COMBINING_CLASS_NOT_REORDERED = 0, + HB_UNICODE_COMBINING_CLASS_OVERLAY = 1, + HB_UNICODE_COMBINING_CLASS_NUKTA = 7, + HB_UNICODE_COMBINING_CLASS_KANA_VOICING = 8, + HB_UNICODE_COMBINING_CLASS_VIRAMA = 9, + + /* Hebrew */ + HB_UNICODE_COMBINING_CLASS_CCC10 = 10, + HB_UNICODE_COMBINING_CLASS_CCC11 = 11, + HB_UNICODE_COMBINING_CLASS_CCC12 = 12, + HB_UNICODE_COMBINING_CLASS_CCC13 = 13, + HB_UNICODE_COMBINING_CLASS_CCC14 = 14, + HB_UNICODE_COMBINING_CLASS_CCC15 = 15, + HB_UNICODE_COMBINING_CLASS_CCC16 = 16, + HB_UNICODE_COMBINING_CLASS_CCC17 = 17, + HB_UNICODE_COMBINING_CLASS_CCC18 = 18, + HB_UNICODE_COMBINING_CLASS_CCC19 = 19, + HB_UNICODE_COMBINING_CLASS_CCC20 = 20, + HB_UNICODE_COMBINING_CLASS_CCC21 = 21, + HB_UNICODE_COMBINING_CLASS_CCC22 = 22, + HB_UNICODE_COMBINING_CLASS_CCC23 = 23, + HB_UNICODE_COMBINING_CLASS_CCC24 = 24, + HB_UNICODE_COMBINING_CLASS_CCC25 = 25, + HB_UNICODE_COMBINING_CLASS_CCC26 = 26, + + /* Arabic */ + HB_UNICODE_COMBINING_CLASS_CCC27 = 27, + HB_UNICODE_COMBINING_CLASS_CCC28 = 28, + HB_UNICODE_COMBINING_CLASS_CCC29 = 29, + HB_UNICODE_COMBINING_CLASS_CCC30 = 30, + HB_UNICODE_COMBINING_CLASS_CCC31 = 31, + HB_UNICODE_COMBINING_CLASS_CCC32 = 32, + HB_UNICODE_COMBINING_CLASS_CCC33 = 33, + HB_UNICODE_COMBINING_CLASS_CCC34 = 34, + HB_UNICODE_COMBINING_CLASS_CCC35 = 35, + + /* Syriac */ + HB_UNICODE_COMBINING_CLASS_CCC36 = 36, + + /* Telugu */ + HB_UNICODE_COMBINING_CLASS_CCC84 = 84, + HB_UNICODE_COMBINING_CLASS_CCC91 = 91, + + /* Thai */ + HB_UNICODE_COMBINING_CLASS_CCC103 = 103, + HB_UNICODE_COMBINING_CLASS_CCC107 = 107, + + /* Lao */ + HB_UNICODE_COMBINING_CLASS_CCC118 = 118, + HB_UNICODE_COMBINING_CLASS_CCC122 = 122, + + /* Tibetan */ + HB_UNICODE_COMBINING_CLASS_CCC129 = 129, + HB_UNICODE_COMBINING_CLASS_CCC130 = 130, + HB_UNICODE_COMBINING_CLASS_CCC132 = 132, + + + HB_UNICODE_COMBINING_CLASS_ATTACHED_BELOW_LEFT = 200, + HB_UNICODE_COMBINING_CLASS_ATTACHED_BELOW = 202, + HB_UNICODE_COMBINING_CLASS_ATTACHED_ABOVE = 214, + HB_UNICODE_COMBINING_CLASS_ATTACHED_ABOVE_RIGHT = 216, + HB_UNICODE_COMBINING_CLASS_BELOW_LEFT = 218, + HB_UNICODE_COMBINING_CLASS_BELOW = 220, + HB_UNICODE_COMBINING_CLASS_BELOW_RIGHT = 222, + HB_UNICODE_COMBINING_CLASS_LEFT = 224, + HB_UNICODE_COMBINING_CLASS_RIGHT = 226, + HB_UNICODE_COMBINING_CLASS_ABOVE_LEFT = 228, + HB_UNICODE_COMBINING_CLASS_ABOVE = 230, + HB_UNICODE_COMBINING_CLASS_ABOVE_RIGHT = 232, + HB_UNICODE_COMBINING_CLASS_DOUBLE_BELOW = 233, + HB_UNICODE_COMBINING_CLASS_DOUBLE_ABOVE = 234, + + HB_UNICODE_COMBINING_CLASS_IOTA_SUBSCRIPT = 240, + + HB_UNICODE_COMBINING_CLASS_INVALID = 255 +} hb_unicode_combining_class_t; + + +/* + * hb_unicode_funcs_t + */ + +/** + * hb_unicode_funcs_t: + * + * Data type containing a set of virtual methods used for + * accessing various Unicode character properties. + * + * HarfBuzz provides a default function for each of the + * methods in #hb_unicode_funcs_t. Client programs can implement + * their own replacements for the individual Unicode functions, as + * needed, and replace the default by calling the setter for a + * method. + **/ +typedef struct hb_unicode_funcs_t hb_unicode_funcs_t; + + +/* + * just give me the best implementation you've got there. + */ +HB_EXTERN hb_unicode_funcs_t * +hb_unicode_funcs_get_default (void); + + +HB_EXTERN hb_unicode_funcs_t * +hb_unicode_funcs_create (hb_unicode_funcs_t *parent); + +HB_EXTERN hb_unicode_funcs_t * +hb_unicode_funcs_get_empty (void); + +HB_EXTERN hb_unicode_funcs_t * +hb_unicode_funcs_reference (hb_unicode_funcs_t *ufuncs); + +HB_EXTERN void +hb_unicode_funcs_destroy (hb_unicode_funcs_t *ufuncs); + +HB_EXTERN hb_bool_t +hb_unicode_funcs_set_user_data (hb_unicode_funcs_t *ufuncs, + hb_user_data_key_t *key, + void * data, + hb_destroy_func_t destroy, + hb_bool_t replace); + + +HB_EXTERN void * +hb_unicode_funcs_get_user_data (const hb_unicode_funcs_t *ufuncs, + hb_user_data_key_t *key); + + +HB_EXTERN void +hb_unicode_funcs_make_immutable (hb_unicode_funcs_t *ufuncs); + +HB_EXTERN hb_bool_t +hb_unicode_funcs_is_immutable (hb_unicode_funcs_t *ufuncs); + +HB_EXTERN hb_unicode_funcs_t * +hb_unicode_funcs_get_parent (hb_unicode_funcs_t *ufuncs); + + +/* + * funcs + */ + +/* typedefs */ + +/** + * hb_unicode_combining_class_func_t: + * @ufuncs: A Unicode-functions structure + * @unicode: The code point to query + * @user_data: User data pointer passed by the caller + * + * A virtual method for the #hb_unicode_funcs_t structure. + * + * This method should retrieve the Canonical Combining Class (ccc) + * property for a specified Unicode code point. + * + * Return value: The #hb_unicode_combining_class_t of @unicode + * + **/ +typedef hb_unicode_combining_class_t (*hb_unicode_combining_class_func_t) (hb_unicode_funcs_t *ufuncs, + hb_codepoint_t unicode, + void *user_data); + +/** + * hb_unicode_general_category_func_t: + * @ufuncs: A Unicode-functions structure + * @unicode: The code point to query + * @user_data: User data pointer passed by the caller + * + * A virtual method for the #hb_unicode_funcs_t structure. + * + * This method should retrieve the General Category property for + * a specified Unicode code point. + * + * Return value: The #hb_unicode_general_category_t of @unicode + * + **/ +typedef hb_unicode_general_category_t (*hb_unicode_general_category_func_t) (hb_unicode_funcs_t *ufuncs, + hb_codepoint_t unicode, + void *user_data); + +/** + * hb_unicode_mirroring_func_t: + * @ufuncs: A Unicode-functions structure + * @unicode: The code point to query + * @user_data: User data pointer passed by the caller + * + * A virtual method for the #hb_unicode_funcs_t structure. + * + * This method should retrieve the Bi-Directional Mirroring Glyph + * code point for a specified Unicode code point. + * + * Note: If a code point does not have a specified + * Bi-Directional Mirroring Glyph defined, the method should + * return the original code point. + * + * Return value: The #hb_codepoint_t of the Mirroring Glyph for @unicode + * + **/ +typedef hb_codepoint_t (*hb_unicode_mirroring_func_t) (hb_unicode_funcs_t *ufuncs, + hb_codepoint_t unicode, + void *user_data); + +/** + * hb_unicode_script_func_t: + * @ufuncs: A Unicode-functions structure + * @unicode: The code point to query + * @user_data: User data pointer passed by the caller + * + * A virtual method for the #hb_unicode_funcs_t structure. + * + * This method should retrieve the Script property for a + * specified Unicode code point. + * + * Return value: The #hb_script_t of @unicode + * + **/ +typedef hb_script_t (*hb_unicode_script_func_t) (hb_unicode_funcs_t *ufuncs, + hb_codepoint_t unicode, + void *user_data); + +/** + * hb_unicode_compose_func_t: + * @ufuncs: A Unicode-functions structure + * @a: The first code point to compose + * @b: The second code point to compose + * @ab: (out): The composed code point + * @user_data: user data pointer passed by the caller + * + * A virtual method for the #hb_unicode_funcs_t structure. + * + * This method should compose a sequence of two input Unicode code + * points by canonical equivalence, returning the composed code + * point in a #hb_codepoint_t output parameter (if successful). + * The method must return an #hb_bool_t indicating the success + * of the composition. + * + * Return value: `true` is @a,@b composed, `false` otherwise + * + **/ +typedef hb_bool_t (*hb_unicode_compose_func_t) (hb_unicode_funcs_t *ufuncs, + hb_codepoint_t a, + hb_codepoint_t b, + hb_codepoint_t *ab, + void *user_data); + +/** + * hb_unicode_decompose_func_t: + * @ufuncs: A Unicode-functions structure + * @ab: The code point to decompose + * @a: (out): The first decomposed code point + * @b: (out): The second decomposed code point + * @user_data: user data pointer passed by the caller + * + * A virtual method for the #hb_unicode_funcs_t structure. + * + * This method should decompose an input Unicode code point, + * returning the two decomposed code points in #hb_codepoint_t + * output parameters (if successful). The method must return an + * #hb_bool_t indicating the success of the composition. + * + * Return value: `true` if @ab decomposed, `false` otherwise + * + **/ +typedef hb_bool_t (*hb_unicode_decompose_func_t) (hb_unicode_funcs_t *ufuncs, + hb_codepoint_t ab, + hb_codepoint_t *a, + hb_codepoint_t *b, + void *user_data); + +/* func setters */ + +/** + * hb_unicode_funcs_set_combining_class_func: + * @ufuncs: A Unicode-functions structure + * @func: (closure user_data) (destroy destroy) (scope notified): The callback function to assign + * @user_data: Data to pass to @func + * @destroy: (nullable): The function to call when @user_data is not needed anymore + * + * Sets the implementation function for #hb_unicode_combining_class_func_t. + * + * Since: 0.9.2 + **/ +HB_EXTERN void +hb_unicode_funcs_set_combining_class_func (hb_unicode_funcs_t *ufuncs, + hb_unicode_combining_class_func_t func, + void *user_data, hb_destroy_func_t destroy); + +/** + * hb_unicode_funcs_set_general_category_func: + * @ufuncs: A Unicode-functions structure + * @func: (closure user_data) (destroy destroy) (scope notified): The callback function to assign + * @user_data: Data to pass to @func + * @destroy: (nullable): The function to call when @user_data is not needed anymore + * + * Sets the implementation function for #hb_unicode_general_category_func_t. + * + * Since: 0.9.2 + **/ +HB_EXTERN void +hb_unicode_funcs_set_general_category_func (hb_unicode_funcs_t *ufuncs, + hb_unicode_general_category_func_t func, + void *user_data, hb_destroy_func_t destroy); + +/** + * hb_unicode_funcs_set_mirroring_func: + * @ufuncs: A Unicode-functions structure + * @func: (closure user_data) (destroy destroy) (scope notified): The callback function to assign + * @user_data: Data to pass to @func + * @destroy: (nullable): The function to call when @user_data is not needed anymore + * + * Sets the implementation function for #hb_unicode_mirroring_func_t. + * + * Since: 0.9.2 + **/ +HB_EXTERN void +hb_unicode_funcs_set_mirroring_func (hb_unicode_funcs_t *ufuncs, + hb_unicode_mirroring_func_t func, + void *user_data, hb_destroy_func_t destroy); + +/** + * hb_unicode_funcs_set_script_func: + * @ufuncs: A Unicode-functions structure + * @func: (closure user_data) (destroy destroy) (scope notified): The callback function to assign + * @user_data: Data to pass to @func + * @destroy: (nullable): The function to call when @user_data is not needed anymore + * + * Sets the implementation function for #hb_unicode_script_func_t. + * + * Since: 0.9.2 + **/ +HB_EXTERN void +hb_unicode_funcs_set_script_func (hb_unicode_funcs_t *ufuncs, + hb_unicode_script_func_t func, + void *user_data, hb_destroy_func_t destroy); + +/** + * hb_unicode_funcs_set_compose_func: + * @ufuncs: A Unicode-functions structure + * @func: (closure user_data) (destroy destroy) (scope notified): The callback function to assign + * @user_data: Data to pass to @func + * @destroy: (nullable): The function to call when @user_data is not needed anymore + * + * Sets the implementation function for #hb_unicode_compose_func_t. + * + * Since: 0.9.2 + **/ +HB_EXTERN void +hb_unicode_funcs_set_compose_func (hb_unicode_funcs_t *ufuncs, + hb_unicode_compose_func_t func, + void *user_data, hb_destroy_func_t destroy); + +/** + * hb_unicode_funcs_set_decompose_func: + * @ufuncs: A Unicode-functions structure + * @func: (closure user_data) (destroy destroy) (scope notified): The callback function to assign + * @user_data: Data to pass to @func + * @destroy: (nullable): The function to call when @user_data is not needed anymore + * + * Sets the implementation function for #hb_unicode_decompose_func_t. + * + * Since: 0.9.2 + **/ +HB_EXTERN void +hb_unicode_funcs_set_decompose_func (hb_unicode_funcs_t *ufuncs, + hb_unicode_decompose_func_t func, + void *user_data, hb_destroy_func_t destroy); + +/* accessors */ + +/** + * hb_unicode_combining_class: + * @ufuncs: The Unicode-functions structure + * @unicode: The code point to query + * + * Retrieves the Canonical Combining Class (ccc) property + * of code point @unicode. + * + * Return value: The #hb_unicode_combining_class_t of @unicode + * + * Since: 0.9.2 + **/ +HB_EXTERN hb_unicode_combining_class_t +hb_unicode_combining_class (hb_unicode_funcs_t *ufuncs, + hb_codepoint_t unicode); + +/** + * hb_unicode_general_category: + * @ufuncs: The Unicode-functions structure + * @unicode: The code point to query + * + * Retrieves the General Category (gc) property + * of code point @unicode. + * + * Return value: The #hb_unicode_general_category_t of @unicode + * + * Since: 0.9.2 + **/ +HB_EXTERN hb_unicode_general_category_t +hb_unicode_general_category (hb_unicode_funcs_t *ufuncs, + hb_codepoint_t unicode); + +/** + * hb_unicode_mirroring: + * @ufuncs: The Unicode-functions structure + * @unicode: The code point to query + * + * Retrieves the Bi-directional Mirroring Glyph code + * point defined for code point @unicode. + * + * Return value: The #hb_codepoint_t of the Mirroring Glyph for @unicode + * + * Since: 0.9.2 + **/ +HB_EXTERN hb_codepoint_t +hb_unicode_mirroring (hb_unicode_funcs_t *ufuncs, + hb_codepoint_t unicode); + +/** + * hb_unicode_script: + * @ufuncs: The Unicode-functions structure + * @unicode: The code point to query + * + * Retrieves the #hb_script_t script to which code + * point @unicode belongs. + * + * Return value: The #hb_script_t of @unicode + * + * Since: 0.9.2 + **/ +HB_EXTERN hb_script_t +hb_unicode_script (hb_unicode_funcs_t *ufuncs, + hb_codepoint_t unicode); + +HB_EXTERN hb_bool_t +hb_unicode_compose (hb_unicode_funcs_t *ufuncs, + hb_codepoint_t a, + hb_codepoint_t b, + hb_codepoint_t *ab); + +HB_EXTERN hb_bool_t +hb_unicode_decompose (hb_unicode_funcs_t *ufuncs, + hb_codepoint_t ab, + hb_codepoint_t *a, + hb_codepoint_t *b); + +HB_END_DECLS + +#endif /* HB_UNICODE_H */ diff --git a/dependencies/winx64/include/harfbuzz/hb-version.h b/dependencies/winx64/include/harfbuzz/hb-version.h new file mode 100644 index 0000000..85d760b --- /dev/null +++ b/dependencies/winx64/include/harfbuzz/hb-version.h @@ -0,0 +1,95 @@ +/* + * Copyright © 2011 Google, Inc. + * + * This is part of HarfBuzz, a text shaping library. + * + * Permission is hereby granted, without written agreement and without + * license or royalty fees, to use, copy, modify, and distribute this + * software and its documentation for any purpose, provided that the + * above copyright notice and the following two paragraphs appear in + * all copies of this software. + * + * IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE TO ANY PARTY FOR + * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES + * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN + * IF THE COPYRIGHT HOLDER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + * THE COPYRIGHT HOLDER SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, + * BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND + * FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS + * ON AN "AS IS" BASIS, AND THE COPYRIGHT HOLDER HAS NO OBLIGATION TO + * PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. + * + * Google Author(s): Behdad Esfahbod + */ + +#if !defined(HB_H_IN) && !defined(HB_NO_SINGLE_HEADER_ERROR) +#error "Include instead." +#endif + +#ifndef HB_VERSION_H +#define HB_VERSION_H + +#include "hb-common.h" + +HB_BEGIN_DECLS + + +/** + * HB_VERSION_MAJOR: + * + * The major component of the library version available at compile-time. + */ +#define HB_VERSION_MAJOR 11 +/** + * HB_VERSION_MINOR: + * + * The minor component of the library version available at compile-time. + */ +#define HB_VERSION_MINOR 2 +/** + * HB_VERSION_MICRO: + * + * The micro component of the library version available at compile-time. + */ +#define HB_VERSION_MICRO 1 + +/** + * HB_VERSION_STRING: + * + * A string literal containing the library version available at compile-time. + */ +#define HB_VERSION_STRING "11.2.1" + +/** + * HB_VERSION_ATLEAST: + * @major: the major component of the version number + * @minor: the minor component of the version number + * @micro: the micro component of the version number + * + * Tests the library version at compile-time against a minimum value, + * as three integer components. + */ +#define HB_VERSION_ATLEAST(major,minor,micro) \ + ((major)*10000+(minor)*100+(micro) <= \ + HB_VERSION_MAJOR*10000+HB_VERSION_MINOR*100+HB_VERSION_MICRO) + + +HB_EXTERN void +hb_version (unsigned int *major, + unsigned int *minor, + unsigned int *micro); + +HB_EXTERN const char * +hb_version_string (void); + +HB_EXTERN hb_bool_t +hb_version_atleast (unsigned int major, + unsigned int minor, + unsigned int micro); + + +HB_END_DECLS + +#endif /* HB_VERSION_H */ diff --git a/dependencies/winx64/include/harfbuzz/hb.h b/dependencies/winx64/include/harfbuzz/hb.h new file mode 100644 index 0000000..5a6ae66 --- /dev/null +++ b/dependencies/winx64/include/harfbuzz/hb.h @@ -0,0 +1,51 @@ +/* + * Copyright © 2009 Red Hat, Inc. + * + * This is part of HarfBuzz, a text shaping library. + * + * Permission is hereby granted, without written agreement and without + * license or royalty fees, to use, copy, modify, and distribute this + * software and its documentation for any purpose, provided that the + * above copyright notice and the following two paragraphs appear in + * all copies of this software. + * + * IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE TO ANY PARTY FOR + * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES + * ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN + * IF THE COPYRIGHT HOLDER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + * THE COPYRIGHT HOLDER SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, + * BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND + * FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS + * ON AN "AS IS" BASIS, AND THE COPYRIGHT HOLDER HAS NO OBLIGATION TO + * PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS. + * + * Red Hat Author(s): Behdad Esfahbod + */ + +#ifndef HB_H +#define HB_H +#define HB_H_IN + +#include "hb-blob.h" +#include "hb-buffer.h" +#include "hb-common.h" +#include "hb-deprecated.h" +#include "hb-draw.h" +#include "hb-face.h" +#include "hb-font.h" +#include "hb-map.h" +#include "hb-paint.h" +#include "hb-set.h" +#include "hb-shape.h" +#include "hb-shape-plan.h" +#include "hb-style.h" +#include "hb-unicode.h" +#include "hb-version.h" + +HB_BEGIN_DECLS +HB_END_DECLS + +#undef HB_H_IN +#endif /* HB_H */ diff --git a/dependencies/winx64/include/libpng16/png.h b/dependencies/winx64/include/libpng16/png.h new file mode 100644 index 0000000..9b069e4 --- /dev/null +++ b/dependencies/winx64/include/libpng16/png.h @@ -0,0 +1,3358 @@ +/* png.h - header file for PNG reference library + * + * libpng version 1.6.47 + * + * Copyright (c) 2018-2025 Cosmin Truta + * Copyright (c) 1998-2002,2004,2006-2018 Glenn Randers-Pehrson + * Copyright (c) 1996-1997 Andreas Dilger + * Copyright (c) 1995-1996 Guy Eric Schalnat, Group 42, Inc. + * + * This code is released under the libpng license. (See LICENSE, below.) + * + * Authors and maintainers: + * libpng versions 0.71, May 1995, through 0.88, January 1996: Guy Schalnat + * libpng versions 0.89, June 1996, through 0.96, May 1997: Andreas Dilger + * libpng versions 0.97, January 1998, through 1.6.35, July 2018: + * Glenn Randers-Pehrson + * libpng versions 1.6.36, December 2018, through 1.6.47, February 2025: + * Cosmin Truta + * See also "Contributing Authors", below. + */ + +/* + * COPYRIGHT NOTICE, DISCLAIMER, and LICENSE + * ========================================= + * + * PNG Reference Library License version 2 + * --------------------------------------- + * + * * Copyright (c) 1995-2025 The PNG Reference Library Authors. + * * Copyright (c) 2018-2025 Cosmin Truta. + * * Copyright (c) 2000-2002, 2004, 2006-2018 Glenn Randers-Pehrson. + * * Copyright (c) 1996-1997 Andreas Dilger. + * * Copyright (c) 1995-1996 Guy Eric Schalnat, Group 42, Inc. + * + * The software is supplied "as is", without warranty of any kind, + * express or implied, including, without limitation, the warranties + * of merchantability, fitness for a particular purpose, title, and + * non-infringement. In no event shall the Copyright owners, or + * anyone distributing the software, be liable for any damages or + * other liability, whether in contract, tort or otherwise, arising + * from, out of, or in connection with the software, or the use or + * other dealings in the software, even if advised of the possibility + * of such damage. + * + * Permission is hereby granted to use, copy, modify, and distribute + * this software, or portions hereof, for any purpose, without fee, + * subject to the following restrictions: + * + * 1. The origin of this software must not be misrepresented; you + * must not claim that you wrote the original software. If you + * use this software in a product, an acknowledgment in the product + * documentation would be appreciated, but is not required. + * + * 2. Altered source versions must be plainly marked as such, and must + * not be misrepresented as being the original software. + * + * 3. This Copyright notice may not be removed or altered from any + * source or altered source distribution. + * + * + * PNG Reference Library License version 1 (for libpng 0.5 through 1.6.35) + * ----------------------------------------------------------------------- + * + * libpng versions 1.0.7, July 1, 2000, through 1.6.35, July 15, 2018 are + * Copyright (c) 2000-2002, 2004, 2006-2018 Glenn Randers-Pehrson, are + * derived from libpng-1.0.6, and are distributed according to the same + * disclaimer and license as libpng-1.0.6 with the following individuals + * added to the list of Contributing Authors: + * + * Simon-Pierre Cadieux + * Eric S. Raymond + * Mans Rullgard + * Cosmin Truta + * Gilles Vollant + * James Yu + * Mandar Sahastrabuddhe + * Google Inc. + * Vadim Barkov + * + * and with the following additions to the disclaimer: + * + * There is no warranty against interference with your enjoyment of + * the library or against infringement. There is no warranty that our + * efforts or the library will fulfill any of your particular purposes + * or needs. This library is provided with all faults, and the entire + * risk of satisfactory quality, performance, accuracy, and effort is + * with the user. + * + * Some files in the "contrib" directory and some configure-generated + * files that are distributed with libpng have other copyright owners, and + * are released under other open source licenses. + * + * libpng versions 0.97, January 1998, through 1.0.6, March 20, 2000, are + * Copyright (c) 1998-2000 Glenn Randers-Pehrson, are derived from + * libpng-0.96, and are distributed according to the same disclaimer and + * license as libpng-0.96, with the following individuals added to the + * list of Contributing Authors: + * + * Tom Lane + * Glenn Randers-Pehrson + * Willem van Schaik + * + * libpng versions 0.89, June 1996, through 0.96, May 1997, are + * Copyright (c) 1996-1997 Andreas Dilger, are derived from libpng-0.88, + * and are distributed according to the same disclaimer and license as + * libpng-0.88, with the following individuals added to the list of + * Contributing Authors: + * + * John Bowler + * Kevin Bracey + * Sam Bushell + * Magnus Holmgren + * Greg Roelofs + * Tom Tanner + * + * Some files in the "scripts" directory have other copyright owners, + * but are released under this license. + * + * libpng versions 0.5, May 1995, through 0.88, January 1996, are + * Copyright (c) 1995-1996 Guy Eric Schalnat, Group 42, Inc. + * + * For the purposes of this copyright and license, "Contributing Authors" + * is defined as the following set of individuals: + * + * Andreas Dilger + * Dave Martindale + * Guy Eric Schalnat + * Paul Schmidt + * Tim Wegner + * + * The PNG Reference Library is supplied "AS IS". The Contributing + * Authors and Group 42, Inc. disclaim all warranties, expressed or + * implied, including, without limitation, the warranties of + * merchantability and of fitness for any purpose. The Contributing + * Authors and Group 42, Inc. assume no liability for direct, indirect, + * incidental, special, exemplary, or consequential damages, which may + * result from the use of the PNG Reference Library, even if advised of + * the possibility of such damage. + * + * Permission is hereby granted to use, copy, modify, and distribute this + * source code, or portions hereof, for any purpose, without fee, subject + * to the following restrictions: + * + * 1. The origin of this source code must not be misrepresented. + * + * 2. Altered versions must be plainly marked as such and must not + * be misrepresented as being the original source. + * + * 3. This Copyright notice may not be removed or altered from any + * source or altered source distribution. + * + * The Contributing Authors and Group 42, Inc. specifically permit, + * without fee, and encourage the use of this source code as a component + * to supporting the PNG file format in commercial products. If you use + * this source code in a product, acknowledgment is not required but would + * be appreciated. + * + * END OF COPYRIGHT NOTICE, DISCLAIMER, and LICENSE. + * + * TRADEMARK + * ========= + * + * The name "libpng" has not been registered by the Copyright owners + * as a trademark in any jurisdiction. However, because libpng has + * been distributed and maintained world-wide, continually since 1995, + * the Copyright owners claim "common-law trademark protection" in any + * jurisdiction where common-law trademark is recognized. + */ + +/* + * A "png_get_copyright" function is available, for convenient use in "about" + * boxes and the like: + * + * printf("%s", png_get_copyright(NULL)); + * + * Also, the PNG logo (in PNG format, of course) is supplied in the + * files "pngbar.png" and "pngbar.jpg (88x31) and "pngnow.png" (98x31). + */ + +/* + * The contributing authors would like to thank all those who helped + * with testing, bug fixes, and patience. This wouldn't have been + * possible without all of you. + * + * Thanks to Frank J. T. Wojcik for helping with the documentation. + */ + +/* Note about libpng version numbers: + * + * Due to various miscommunications, unforeseen code incompatibilities + * and occasional factors outside the authors' control, version numbering + * on the library has not always been consistent and straightforward. + * The following table summarizes matters since version 0.89c, which was + * the first widely used release: + * + * source png.h png.h shared-lib + * version string int version + * ------- ------ ----- ---------- + * 0.89c "1.0 beta 3" 0.89 89 1.0.89 + * 0.90 "1.0 beta 4" 0.90 90 0.90 [should have been 2.0.90] + * 0.95 "1.0 beta 5" 0.95 95 0.95 [should have been 2.0.95] + * 0.96 "1.0 beta 6" 0.96 96 0.96 [should have been 2.0.96] + * 0.97b "1.00.97 beta 7" 1.00.97 97 1.0.1 [should have been 2.0.97] + * 0.97c 0.97 97 2.0.97 + * 0.98 0.98 98 2.0.98 + * 0.99 0.99 98 2.0.99 + * 0.99a-m 0.99 99 2.0.99 + * 1.00 1.00 100 2.1.0 [100 should be 10000] + * 1.0.0 (from here on, the 100 2.1.0 [100 should be 10000] + * 1.0.1 png.h string is 10001 2.1.0 + * 1.0.1a-e identical to the 10002 from here on, the shared library + * 1.0.2 source version) 10002 is 2.V where V is the source code + * 1.0.2a-b 10003 version, except as noted. + * 1.0.3 10003 + * 1.0.3a-d 10004 + * 1.0.4 10004 + * 1.0.4a-f 10005 + * 1.0.5 (+ 2 patches) 10005 + * 1.0.5a-d 10006 + * 1.0.5e-r 10100 (not source compatible) + * 1.0.5s-v 10006 (not binary compatible) + * 1.0.6 (+ 3 patches) 10006 (still binary incompatible) + * 1.0.6d-f 10007 (still binary incompatible) + * 1.0.6g 10007 + * 1.0.6h 10007 10.6h (testing xy.z so-numbering) + * 1.0.6i 10007 10.6i + * 1.0.6j 10007 2.1.0.6j (incompatible with 1.0.0) + * 1.0.7beta11-14 DLLNUM 10007 2.1.0.7beta11-14 (binary compatible) + * 1.0.7beta15-18 1 10007 2.1.0.7beta15-18 (binary compatible) + * 1.0.7rc1-2 1 10007 2.1.0.7rc1-2 (binary compatible) + * 1.0.7 1 10007 (still compatible) + * ... + * 1.0.69 10 10069 10.so.0.69[.0] + * ... + * 1.2.59 13 10259 12.so.0.59[.0] + * ... + * 1.4.20 14 10420 14.so.0.20[.0] + * ... + * 1.5.30 15 10530 15.so.15.30[.0] + * ... + * 1.6.47 16 10647 16.so.16.47[.0] + * + * Henceforth the source version will match the shared-library major and + * minor numbers; the shared-library major version number will be used for + * changes in backward compatibility, as it is intended. + * The PNG_LIBPNG_VER macro, which is not used within libpng but is + * available for applications, is an unsigned integer of the form XYYZZ + * corresponding to the source version X.Y.Z (leading zeros in Y and Z). + * Beta versions were given the previous public release number plus a + * letter, until version 1.0.6j; from then on they were given the upcoming + * public release number plus "betaNN" or "rcNN". + * + * Binary incompatibility exists only when applications make direct access + * to the info_ptr or png_ptr members through png.h, and the compiled + * application is loaded with a different version of the library. + * + * See libpng.txt or libpng.3 for more information. The PNG specification + * is available as a W3C Recommendation and as an ISO/IEC Standard; see + * + */ + +#ifndef PNG_H +#define PNG_H + +/* This is not the place to learn how to use libpng. The file libpng-manual.txt + * describes how to use libpng, and the file example.c summarizes it + * with some code on which to build. This file is useful for looking + * at the actual function definitions and structure components. If that + * file has been stripped from your copy of libpng, you can find it at + * + * + * If you just need to read a PNG file and don't want to read the documentation + * skip to the end of this file and read the section entitled 'simplified API'. + */ + +/* Version information for png.h - this should match the version in png.c */ +#define PNG_LIBPNG_VER_STRING "1.6.47" +#define PNG_HEADER_VERSION_STRING " libpng version " PNG_LIBPNG_VER_STRING "\n" + +/* The versions of shared library builds should stay in sync, going forward */ +#define PNG_LIBPNG_VER_SHAREDLIB 16 +#define PNG_LIBPNG_VER_SONUM PNG_LIBPNG_VER_SHAREDLIB /* [Deprecated] */ +#define PNG_LIBPNG_VER_DLLNUM PNG_LIBPNG_VER_SHAREDLIB /* [Deprecated] */ + +/* These should match the first 3 components of PNG_LIBPNG_VER_STRING: */ +#define PNG_LIBPNG_VER_MAJOR 1 +#define PNG_LIBPNG_VER_MINOR 6 +#define PNG_LIBPNG_VER_RELEASE 47 + +/* This should be zero for a public release, or non-zero for a + * development version. + */ +#define PNG_LIBPNG_VER_BUILD 0 + +/* Release Status */ +#define PNG_LIBPNG_BUILD_ALPHA 1 +#define PNG_LIBPNG_BUILD_BETA 2 +#define PNG_LIBPNG_BUILD_RC 3 +#define PNG_LIBPNG_BUILD_STABLE 4 +#define PNG_LIBPNG_BUILD_RELEASE_STATUS_MASK 7 + +/* Release-Specific Flags */ +#define PNG_LIBPNG_BUILD_PATCH 8 /* Can be OR'ed with + PNG_LIBPNG_BUILD_STABLE only */ +#define PNG_LIBPNG_BUILD_PRIVATE 16 /* Cannot be OR'ed with + PNG_LIBPNG_BUILD_SPECIAL */ +#define PNG_LIBPNG_BUILD_SPECIAL 32 /* Cannot be OR'ed with + PNG_LIBPNG_BUILD_PRIVATE */ + +#define PNG_LIBPNG_BUILD_BASE_TYPE PNG_LIBPNG_BUILD_STABLE + +/* Careful here. At one time, Guy wanted to use 082, but that + * would be octal. We must not include leading zeros. + * Versions 0.7 through 1.0.0 were in the range 0 to 100 here + * (only version 1.0.0 was mis-numbered 100 instead of 10000). + * From version 1.0.1 it is: + * XXYYZZ, where XX=major, YY=minor, ZZ=release + */ +#define PNG_LIBPNG_VER 10647 /* 1.6.47 */ + +/* Library configuration: these options cannot be changed after + * the library has been built. + */ +#ifndef PNGLCONF_H +/* If pnglibconf.h is missing, you can + * copy scripts/pnglibconf.h.prebuilt to pnglibconf.h + */ +# include "pnglibconf.h" +#endif + +#ifndef PNG_VERSION_INFO_ONLY +/* Machine specific configuration. */ +# include "pngconf.h" +#endif + +/* + * Added at libpng-1.2.8 + * + * Ref MSDN: Private as priority over Special + * VS_FF_PRIVATEBUILD File *was not* built using standard release + * procedures. If this value is given, the StringFileInfo block must + * contain a PrivateBuild string. + * + * VS_FF_SPECIALBUILD File *was* built by the original company using + * standard release procedures but is a variation of the standard + * file of the same version number. If this value is given, the + * StringFileInfo block must contain a SpecialBuild string. + */ + +#ifdef PNG_USER_PRIVATEBUILD /* From pnglibconf.h */ +# define PNG_LIBPNG_BUILD_TYPE \ + (PNG_LIBPNG_BUILD_BASE_TYPE | PNG_LIBPNG_BUILD_PRIVATE) +#else +# ifdef PNG_LIBPNG_SPECIALBUILD +# define PNG_LIBPNG_BUILD_TYPE \ + (PNG_LIBPNG_BUILD_BASE_TYPE | PNG_LIBPNG_BUILD_SPECIAL) +# else +# define PNG_LIBPNG_BUILD_TYPE (PNG_LIBPNG_BUILD_BASE_TYPE) +# endif +#endif + +#ifndef PNG_VERSION_INFO_ONLY + +/* Inhibit C++ name-mangling for libpng functions but not for system calls. */ +#ifdef __cplusplus +extern "C" { +#endif /* __cplusplus */ + +/* Version information for C files, stored in png.c. This had better match + * the version above. + */ +#define png_libpng_ver png_get_header_ver(NULL) + +/* This file is arranged in several sections: + * + * 1. [omitted] + * 2. Any configuration options that can be specified by for the application + * code when it is built. (Build time configuration is in pnglibconf.h) + * 3. Type definitions (base types are defined in pngconf.h), structure + * definitions. + * 4. Exported library functions. + * 5. Simplified API. + * 6. Implementation options. + * + * The library source code has additional files (principally pngpriv.h) that + * allow configuration of the library. + */ + +/* Section 1: [omitted] */ + +/* Section 2: run time configuration + * See pnglibconf.h for build time configuration + * + * Run time configuration allows the application to choose between + * implementations of certain arithmetic APIs. The default is set + * at build time and recorded in pnglibconf.h, but it is safe to + * override these (and only these) settings. Note that this won't + * change what the library does, only application code, and the + * settings can (and probably should) be made on a per-file basis + * by setting the #defines before including png.h + * + * Use macros to read integers from PNG data or use the exported + * functions? + * PNG_USE_READ_MACROS: use the macros (see below) Note that + * the macros evaluate their argument multiple times. + * PNG_NO_USE_READ_MACROS: call the relevant library function. + * + * Use the alternative algorithm for compositing alpha samples that + * does not use division? + * PNG_READ_COMPOSITE_NODIV_SUPPORTED: use the 'no division' + * algorithm. + * PNG_NO_READ_COMPOSITE_NODIV: use the 'division' algorithm. + * + * How to handle benign errors if PNG_ALLOW_BENIGN_ERRORS is + * false? + * PNG_ALLOW_BENIGN_ERRORS: map calls to the benign error + * APIs to png_warning. + * Otherwise the calls are mapped to png_error. + */ + +/* Section 3: type definitions, including structures and compile time + * constants. + * See pngconf.h for base types that vary by machine/system + */ + +/* This triggers a compiler error in png.c, if png.c and png.h + * do not agree upon the version number. + */ +typedef char* png_libpng_version_1_6_47; + +/* Basic control structions. Read libpng-manual.txt or libpng.3 for more info. + * + * png_struct is the cache of information used while reading or writing a single + * PNG file. One of these is always required, although the simplified API + * (below) hides the creation and destruction of it. + */ +typedef struct png_struct_def png_struct; +typedef const png_struct * png_const_structp; +typedef png_struct * png_structp; +typedef png_struct * * png_structpp; + +/* png_info contains information read from or to be written to a PNG file. One + * or more of these must exist while reading or creating a PNG file. The + * information is not used by libpng during read but is used to control what + * gets written when a PNG file is created. "png_get_" function calls read + * information during read and "png_set_" functions calls write information + * when creating a PNG. + * been moved into a separate header file that is not accessible to + * applications. Read libpng-manual.txt or libpng.3 for more info. + */ +typedef struct png_info_def png_info; +typedef png_info * png_infop; +typedef const png_info * png_const_infop; +typedef png_info * * png_infopp; + +/* Types with names ending 'p' are pointer types. The corresponding types with + * names ending 'rp' are identical pointer types except that the pointer is + * marked 'restrict', which means that it is the only pointer to the object + * passed to the function. Applications should not use the 'restrict' types; + * it is always valid to pass 'p' to a pointer with a function argument of the + * corresponding 'rp' type. Different compilers have different rules with + * regard to type matching in the presence of 'restrict'. For backward + * compatibility libpng callbacks never have 'restrict' in their parameters and, + * consequentially, writing portable application code is extremely difficult if + * an attempt is made to use 'restrict'. + */ +typedef png_struct * PNG_RESTRICT png_structrp; +typedef const png_struct * PNG_RESTRICT png_const_structrp; +typedef png_info * PNG_RESTRICT png_inforp; +typedef const png_info * PNG_RESTRICT png_const_inforp; + +/* Three color definitions. The order of the red, green, and blue, (and the + * exact size) is not important, although the size of the fields need to + * be png_byte or png_uint_16 (as defined below). + */ +typedef struct png_color_struct +{ + png_byte red; + png_byte green; + png_byte blue; +} png_color; +typedef png_color * png_colorp; +typedef const png_color * png_const_colorp; +typedef png_color * * png_colorpp; + +typedef struct png_color_16_struct +{ + png_byte index; /* used for palette files */ + png_uint_16 red; /* for use in red green blue files */ + png_uint_16 green; + png_uint_16 blue; + png_uint_16 gray; /* for use in grayscale files */ +} png_color_16; +typedef png_color_16 * png_color_16p; +typedef const png_color_16 * png_const_color_16p; +typedef png_color_16 * * png_color_16pp; + +typedef struct png_color_8_struct +{ + png_byte red; /* for use in red green blue files */ + png_byte green; + png_byte blue; + png_byte gray; /* for use in grayscale files */ + png_byte alpha; /* for alpha channel files */ +} png_color_8; +typedef png_color_8 * png_color_8p; +typedef const png_color_8 * png_const_color_8p; +typedef png_color_8 * * png_color_8pp; + +/* + * The following two structures are used for the in-core representation + * of sPLT chunks. + */ +typedef struct png_sPLT_entry_struct +{ + png_uint_16 red; + png_uint_16 green; + png_uint_16 blue; + png_uint_16 alpha; + png_uint_16 frequency; +} png_sPLT_entry; +typedef png_sPLT_entry * png_sPLT_entryp; +typedef const png_sPLT_entry * png_const_sPLT_entryp; +typedef png_sPLT_entry * * png_sPLT_entrypp; + +/* When the depth of the sPLT palette is 8 bits, the color and alpha samples + * occupy the LSB of their respective members, and the MSB of each member + * is zero-filled. The frequency member always occupies the full 16 bits. + */ + +typedef struct png_sPLT_struct +{ + png_charp name; /* palette name */ + png_byte depth; /* depth of palette samples */ + png_sPLT_entryp entries; /* palette entries */ + png_int_32 nentries; /* number of palette entries */ +} png_sPLT_t; +typedef png_sPLT_t * png_sPLT_tp; +typedef const png_sPLT_t * png_const_sPLT_tp; +typedef png_sPLT_t * * png_sPLT_tpp; + +#ifdef PNG_TEXT_SUPPORTED +/* png_text holds the contents of a text/ztxt/itxt chunk in a PNG file, + * and whether that contents is compressed or not. The "key" field + * points to a regular zero-terminated C string. The "text" fields can be a + * regular C string, an empty string, or a NULL pointer. + * However, the structure returned by png_get_text() will always contain + * the "text" field as a regular zero-terminated C string (possibly + * empty), never a NULL pointer, so it can be safely used in printf() and + * other string-handling functions. Note that the "itxt_length", "lang", and + * "lang_key" members of the structure only exist when the library is built + * with iTXt chunk support. Prior to libpng-1.4.0 the library was built by + * default without iTXt support. Also note that when iTXt *is* supported, + * the "lang" and "lang_key" fields contain NULL pointers when the + * "compression" field contains * PNG_TEXT_COMPRESSION_NONE or + * PNG_TEXT_COMPRESSION_zTXt. Note that the "compression value" is not the + * same as what appears in the PNG tEXt/zTXt/iTXt chunk's "compression flag" + * which is always 0 or 1, or its "compression method" which is always 0. + */ +typedef struct png_text_struct +{ + int compression; /* compression value: + -1: tEXt, none + 0: zTXt, deflate + 1: iTXt, none + 2: iTXt, deflate */ + png_charp key; /* keyword, 1-79 character description of "text" */ + png_charp text; /* comment, may be an empty string (ie "") + or a NULL pointer */ + size_t text_length; /* length of the text string */ + size_t itxt_length; /* length of the itxt string */ + png_charp lang; /* language code, 0-79 characters + or a NULL pointer */ + png_charp lang_key; /* keyword translated UTF-8 string, 0 or more + chars or a NULL pointer */ +} png_text; +typedef png_text * png_textp; +typedef const png_text * png_const_textp; +typedef png_text * * png_textpp; +#endif + +/* Supported compression types for text in PNG files (tEXt, and zTXt). + * The values of the PNG_TEXT_COMPRESSION_ defines should NOT be changed. */ +#define PNG_TEXT_COMPRESSION_NONE_WR -3 +#define PNG_TEXT_COMPRESSION_zTXt_WR -2 +#define PNG_TEXT_COMPRESSION_NONE -1 +#define PNG_TEXT_COMPRESSION_zTXt 0 +#define PNG_ITXT_COMPRESSION_NONE 1 +#define PNG_ITXT_COMPRESSION_zTXt 2 +#define PNG_TEXT_COMPRESSION_LAST 3 /* Not a valid value */ + +/* png_time is a way to hold the time in an machine independent way. + * Two conversions are provided, both from time_t and struct tm. There + * is no portable way to convert to either of these structures, as far + * as I know. If you know of a portable way, send it to me. As a side + * note - PNG has always been Year 2000 compliant! + */ +typedef struct png_time_struct +{ + png_uint_16 year; /* full year, as in, 1995 */ + png_byte month; /* month of year, 1 - 12 */ + png_byte day; /* day of month, 1 - 31 */ + png_byte hour; /* hour of day, 0 - 23 */ + png_byte minute; /* minute of hour, 0 - 59 */ + png_byte second; /* second of minute, 0 - 60 (for leap seconds) */ +} png_time; +typedef png_time * png_timep; +typedef const png_time * png_const_timep; +typedef png_time * * png_timepp; + +#if defined(PNG_STORE_UNKNOWN_CHUNKS_SUPPORTED) ||\ + defined(PNG_USER_CHUNKS_SUPPORTED) +/* png_unknown_chunk is a structure to hold queued chunks for which there is + * no specific support. The idea is that we can use this to queue + * up private chunks for output even though the library doesn't actually + * know about their semantics. + * + * The data in the structure is set by libpng on read and used on write. + */ +typedef struct png_unknown_chunk_t +{ + png_byte name[5]; /* Textual chunk name with '\0' terminator */ + png_byte *data; /* Data, should not be modified on read! */ + size_t size; + + /* On write 'location' must be set using the flag values listed below. + * Notice that on read it is set by libpng however the values stored have + * more bits set than are listed below. Always treat the value as a + * bitmask. On write set only one bit - setting multiple bits may cause the + * chunk to be written in multiple places. + */ + png_byte location; /* mode of operation at read time */ +} +png_unknown_chunk; + +typedef png_unknown_chunk * png_unknown_chunkp; +typedef const png_unknown_chunk * png_const_unknown_chunkp; +typedef png_unknown_chunk * * png_unknown_chunkpp; +#endif + +/* Flag values for the unknown chunk location byte. */ +#define PNG_HAVE_IHDR 0x01 +#define PNG_HAVE_PLTE 0x02 +#define PNG_AFTER_IDAT 0x08 + +/* Maximum positive integer used in PNG is (2^31)-1 */ +#define PNG_UINT_31_MAX ((png_uint_32)0x7fffffffL) +#define PNG_UINT_32_MAX ((png_uint_32)(-1)) +#define PNG_SIZE_MAX ((size_t)(-1)) + +/* These are constants for fixed point values encoded in the + * PNG specification manner (x100000) + */ +#define PNG_FP_1 100000 +#define PNG_FP_HALF 50000 +#define PNG_FP_MAX ((png_fixed_point)0x7fffffffL) +#define PNG_FP_MIN (-PNG_FP_MAX) + +/* These describe the color_type field in png_info. */ +/* color type masks */ +#define PNG_COLOR_MASK_PALETTE 1 +#define PNG_COLOR_MASK_COLOR 2 +#define PNG_COLOR_MASK_ALPHA 4 + +/* color types. Note that not all combinations are legal */ +#define PNG_COLOR_TYPE_GRAY 0 +#define PNG_COLOR_TYPE_PALETTE (PNG_COLOR_MASK_COLOR | PNG_COLOR_MASK_PALETTE) +#define PNG_COLOR_TYPE_RGB (PNG_COLOR_MASK_COLOR) +#define PNG_COLOR_TYPE_RGB_ALPHA (PNG_COLOR_MASK_COLOR | PNG_COLOR_MASK_ALPHA) +#define PNG_COLOR_TYPE_GRAY_ALPHA (PNG_COLOR_MASK_ALPHA) +/* aliases */ +#define PNG_COLOR_TYPE_RGBA PNG_COLOR_TYPE_RGB_ALPHA +#define PNG_COLOR_TYPE_GA PNG_COLOR_TYPE_GRAY_ALPHA + +/* This is for compression type. PNG 1.0-1.2 only define the single type. */ +#define PNG_COMPRESSION_TYPE_BASE 0 /* Deflate method 8, 32K window */ +#define PNG_COMPRESSION_TYPE_DEFAULT PNG_COMPRESSION_TYPE_BASE + +/* This is for filter type. PNG 1.0-1.2 only define the single type. */ +#define PNG_FILTER_TYPE_BASE 0 /* Single row per-byte filtering */ +#define PNG_INTRAPIXEL_DIFFERENCING 64 /* Used only in MNG datastreams */ +#define PNG_FILTER_TYPE_DEFAULT PNG_FILTER_TYPE_BASE + +/* These are for the interlacing type. These values should NOT be changed. */ +#define PNG_INTERLACE_NONE 0 /* Non-interlaced image */ +#define PNG_INTERLACE_ADAM7 1 /* Adam7 interlacing */ +#define PNG_INTERLACE_LAST 2 /* Not a valid value */ + +/* These are for the oFFs chunk. These values should NOT be changed. */ +#define PNG_OFFSET_PIXEL 0 /* Offset in pixels */ +#define PNG_OFFSET_MICROMETER 1 /* Offset in micrometers (1/10^6 meter) */ +#define PNG_OFFSET_LAST 2 /* Not a valid value */ + +/* These are for the pCAL chunk. These values should NOT be changed. */ +#define PNG_EQUATION_LINEAR 0 /* Linear transformation */ +#define PNG_EQUATION_BASE_E 1 /* Exponential base e transform */ +#define PNG_EQUATION_ARBITRARY 2 /* Arbitrary base exponential transform */ +#define PNG_EQUATION_HYPERBOLIC 3 /* Hyperbolic sine transformation */ +#define PNG_EQUATION_LAST 4 /* Not a valid value */ + +/* These are for the sCAL chunk. These values should NOT be changed. */ +#define PNG_SCALE_UNKNOWN 0 /* unknown unit (image scale) */ +#define PNG_SCALE_METER 1 /* meters per pixel */ +#define PNG_SCALE_RADIAN 2 /* radians per pixel */ +#define PNG_SCALE_LAST 3 /* Not a valid value */ + +/* These are for the pHYs chunk. These values should NOT be changed. */ +#define PNG_RESOLUTION_UNKNOWN 0 /* pixels/unknown unit (aspect ratio) */ +#define PNG_RESOLUTION_METER 1 /* pixels/meter */ +#define PNG_RESOLUTION_LAST 2 /* Not a valid value */ + +/* These are for the sRGB chunk. These values should NOT be changed. */ +#define PNG_sRGB_INTENT_PERCEPTUAL 0 +#define PNG_sRGB_INTENT_RELATIVE 1 +#define PNG_sRGB_INTENT_SATURATION 2 +#define PNG_sRGB_INTENT_ABSOLUTE 3 +#define PNG_sRGB_INTENT_LAST 4 /* Not a valid value */ + +/* This is for text chunks */ +#define PNG_KEYWORD_MAX_LENGTH 79 + +/* Maximum number of entries in PLTE/sPLT/tRNS arrays */ +#define PNG_MAX_PALETTE_LENGTH 256 + +/* These determine if an ancillary chunk's data has been successfully read + * from the PNG header, or if the application has filled in the corresponding + * data in the info_struct to be written into the output file. The values + * of the PNG_INFO_ defines should NOT be changed. + */ +#define PNG_INFO_gAMA 0x0001U +#define PNG_INFO_sBIT 0x0002U +#define PNG_INFO_cHRM 0x0004U +#define PNG_INFO_PLTE 0x0008U +#define PNG_INFO_tRNS 0x0010U +#define PNG_INFO_bKGD 0x0020U +#define PNG_INFO_hIST 0x0040U +#define PNG_INFO_pHYs 0x0080U +#define PNG_INFO_oFFs 0x0100U +#define PNG_INFO_tIME 0x0200U +#define PNG_INFO_pCAL 0x0400U +#define PNG_INFO_sRGB 0x0800U /* GR-P, 0.96a */ +#define PNG_INFO_iCCP 0x1000U /* ESR, 1.0.6 */ +#define PNG_INFO_sPLT 0x2000U /* ESR, 1.0.6 */ +#define PNG_INFO_sCAL 0x4000U /* ESR, 1.0.6 */ +#define PNG_INFO_IDAT 0x8000U /* ESR, 1.0.6 */ +#define PNG_INFO_eXIf 0x10000U /* GR-P, 1.6.31 */ +#define PNG_INFO_cICP 0x20000U /* PNGv3: 1.6.45 */ +#define PNG_INFO_cLLI 0x40000U /* PNGv3: 1.6.45 */ +#define PNG_INFO_mDCV 0x80000U /* PNGv3: 1.6.45 */ +/* APNG: these chunks are stored as unknown, these flags are never set + * however they are provided as a convenience for implementors of APNG and + * avoids any merge conflicts. + * + * Private chunks: these chunk names violate the chunk name recommendations + * because the chunk definitions have no signature and because the private + * chunks with these names have been reserved. Private definitions should + * avoid them. + */ +#define PNG_INFO_acTL 0x100000U /* PNGv3: 1.6.45: unknown */ +#define PNG_INFO_fcTL 0x200000U /* PNGv3: 1.6.45: unknown */ +#define PNG_INFO_fdAT 0x400000U /* PNGv3: 1.6.45: unknown */ + +/* This is used for the transformation routines, as some of them + * change these values for the row. It also should enable using + * the routines for other purposes. + */ +typedef struct png_row_info_struct +{ + png_uint_32 width; /* width of row */ + size_t rowbytes; /* number of bytes in row */ + png_byte color_type; /* color type of row */ + png_byte bit_depth; /* bit depth of row */ + png_byte channels; /* number of channels (1, 2, 3, or 4) */ + png_byte pixel_depth; /* bits per pixel (depth * channels) */ +} png_row_info; + +typedef png_row_info * png_row_infop; +typedef png_row_info * * png_row_infopp; + +/* These are the function types for the I/O functions and for the functions + * that allow the user to override the default I/O functions with his or her + * own. The png_error_ptr type should match that of user-supplied warning + * and error functions, while the png_rw_ptr type should match that of the + * user read/write data functions. Note that the 'write' function must not + * modify the buffer it is passed. The 'read' function, on the other hand, is + * expected to return the read data in the buffer. + */ +typedef PNG_CALLBACK(void, *png_error_ptr, (png_structp, png_const_charp)); +typedef PNG_CALLBACK(void, *png_rw_ptr, (png_structp, png_bytep, size_t)); +typedef PNG_CALLBACK(void, *png_flush_ptr, (png_structp)); +typedef PNG_CALLBACK(void, *png_read_status_ptr, (png_structp, png_uint_32, + int)); +typedef PNG_CALLBACK(void, *png_write_status_ptr, (png_structp, png_uint_32, + int)); + +#ifdef PNG_PROGRESSIVE_READ_SUPPORTED +typedef PNG_CALLBACK(void, *png_progressive_info_ptr, (png_structp, png_infop)); +typedef PNG_CALLBACK(void, *png_progressive_end_ptr, (png_structp, png_infop)); + +/* The following callback receives png_uint_32 row_number, int pass for the + * png_bytep data of the row. When transforming an interlaced image the + * row number is the row number within the sub-image of the interlace pass, so + * the value will increase to the height of the sub-image (not the full image) + * then reset to 0 for the next pass. + * + * Use PNG_ROW_FROM_PASS_ROW(row, pass) and PNG_COL_FROM_PASS_COL(col, pass) to + * find the output pixel (x,y) given an interlaced sub-image pixel + * (row,col,pass). (See below for these macros.) + */ +typedef PNG_CALLBACK(void, *png_progressive_row_ptr, (png_structp, png_bytep, + png_uint_32, int)); +#endif + +#if defined(PNG_READ_USER_TRANSFORM_SUPPORTED) || \ + defined(PNG_WRITE_USER_TRANSFORM_SUPPORTED) +typedef PNG_CALLBACK(void, *png_user_transform_ptr, (png_structp, png_row_infop, + png_bytep)); +#endif + +#ifdef PNG_USER_CHUNKS_SUPPORTED +typedef PNG_CALLBACK(int, *png_user_chunk_ptr, (png_structp, + png_unknown_chunkp)); +#endif +#ifdef PNG_UNKNOWN_CHUNKS_SUPPORTED +/* not used anywhere */ +/* typedef PNG_CALLBACK(void, *png_unknown_chunk_ptr, (png_structp)); */ +#endif + +#ifdef PNG_SETJMP_SUPPORTED +/* This must match the function definition in , and the application + * must include this before png.h to obtain the definition of jmp_buf. The + * function is required to be PNG_NORETURN, but this is not checked. If the + * function does return the application will crash via an abort() or similar + * system level call. + * + * If you get a warning here while building the library you may need to make + * changes to ensure that pnglibconf.h records the calling convention used by + * your compiler. This may be very difficult - try using a different compiler + * to build the library! + */ +PNG_FUNCTION(void, (PNGCAPI *png_longjmp_ptr), (jmp_buf, int), typedef); +#endif + +/* Transform masks for the high-level interface */ +#define PNG_TRANSFORM_IDENTITY 0x0000 /* read and write */ +#define PNG_TRANSFORM_STRIP_16 0x0001 /* read only */ +#define PNG_TRANSFORM_STRIP_ALPHA 0x0002 /* read only */ +#define PNG_TRANSFORM_PACKING 0x0004 /* read and write */ +#define PNG_TRANSFORM_PACKSWAP 0x0008 /* read and write */ +#define PNG_TRANSFORM_EXPAND 0x0010 /* read only */ +#define PNG_TRANSFORM_INVERT_MONO 0x0020 /* read and write */ +#define PNG_TRANSFORM_SHIFT 0x0040 /* read and write */ +#define PNG_TRANSFORM_BGR 0x0080 /* read and write */ +#define PNG_TRANSFORM_SWAP_ALPHA 0x0100 /* read and write */ +#define PNG_TRANSFORM_SWAP_ENDIAN 0x0200 /* read and write */ +#define PNG_TRANSFORM_INVERT_ALPHA 0x0400 /* read and write */ +#define PNG_TRANSFORM_STRIP_FILLER 0x0800 /* write only */ +/* Added to libpng-1.2.34 */ +#define PNG_TRANSFORM_STRIP_FILLER_BEFORE PNG_TRANSFORM_STRIP_FILLER +#define PNG_TRANSFORM_STRIP_FILLER_AFTER 0x1000 /* write only */ +/* Added to libpng-1.4.0 */ +#define PNG_TRANSFORM_GRAY_TO_RGB 0x2000 /* read only */ +/* Added to libpng-1.5.4 */ +#define PNG_TRANSFORM_EXPAND_16 0x4000 /* read only */ +#if ~0U > 0xffffU /* or else this might break on a 16-bit machine */ +#define PNG_TRANSFORM_SCALE_16 0x8000 /* read only */ +#endif + +/* Flags for MNG supported features */ +#define PNG_FLAG_MNG_EMPTY_PLTE 0x01 +#define PNG_FLAG_MNG_FILTER_64 0x04 +#define PNG_ALL_MNG_FEATURES 0x05 + +/* NOTE: prior to 1.5 these functions had no 'API' style declaration, + * this allowed the zlib default functions to be used on Windows + * platforms. In 1.5 the zlib default malloc (which just calls malloc and + * ignores the first argument) should be completely compatible with the + * following. + */ +typedef PNG_CALLBACK(png_voidp, *png_malloc_ptr, (png_structp, + png_alloc_size_t)); +typedef PNG_CALLBACK(void, *png_free_ptr, (png_structp, png_voidp)); + +/* Section 4: exported functions + * Here are the function definitions most commonly used. This is not + * the place to find out how to use libpng. See libpng-manual.txt for the + * full explanation, see example.c for the summary. This just provides + * a simple one line description of the use of each function. + * + * The PNG_EXPORT() and PNG_EXPORTA() macros used below are defined in + * pngconf.h and in the *.dfn files in the scripts directory. + * + * PNG_EXPORT(ordinal, type, name, (args)); + * + * ordinal: ordinal that is used while building + * *.def files. The ordinal value is only + * relevant when preprocessing png.h with + * the *.dfn files for building symbol table + * entries, and are removed by pngconf.h. + * type: return type of the function + * name: function name + * args: function arguments, with types + * + * When we wish to append attributes to a function prototype we use + * the PNG_EXPORTA() macro instead. + * + * PNG_EXPORTA(ordinal, type, name, (args), attributes); + * + * ordinal, type, name, and args: same as in PNG_EXPORT(). + * attributes: function attributes + */ + +/* Returns the version number of the library */ +PNG_EXPORT(1, png_uint_32, png_access_version_number, (void)); + +/* Tell lib we have already handled the first magic bytes. + * Handling more than 8 bytes from the beginning of the file is an error. + */ +PNG_EXPORT(2, void, png_set_sig_bytes, (png_structrp png_ptr, int num_bytes)); + +/* Check sig[start] through sig[start + num_to_check - 1] to see if it's a + * PNG file. Returns zero if the supplied bytes match the 8-byte PNG + * signature, and non-zero otherwise. Having num_to_check == 0 or + * start > 7 will always fail (i.e. return non-zero). + */ +PNG_EXPORT(3, int, png_sig_cmp, (png_const_bytep sig, size_t start, + size_t num_to_check)); + +/* Simple signature checking function. This is the same as calling + * png_check_sig(sig, n) := (png_sig_cmp(sig, 0, n) == 0). + */ +#define png_check_sig(sig, n) (png_sig_cmp((sig), 0, (n)) == 0) /* DEPRECATED */ + +/* Allocate and initialize png_ptr struct for reading, and any other memory. */ +PNG_EXPORTA(4, png_structp, png_create_read_struct, + (png_const_charp user_png_ver, png_voidp error_ptr, + png_error_ptr error_fn, png_error_ptr warn_fn), + PNG_ALLOCATED); + +/* Allocate and initialize png_ptr struct for writing, and any other memory */ +PNG_EXPORTA(5, png_structp, png_create_write_struct, + (png_const_charp user_png_ver, png_voidp error_ptr, png_error_ptr error_fn, + png_error_ptr warn_fn), + PNG_ALLOCATED); + +PNG_EXPORT(6, size_t, png_get_compression_buffer_size, + (png_const_structrp png_ptr)); + +PNG_EXPORT(7, void, png_set_compression_buffer_size, (png_structrp png_ptr, + size_t size)); + +/* Moved from pngconf.h in 1.4.0 and modified to ensure setjmp/longjmp + * match up. + */ +#ifdef PNG_SETJMP_SUPPORTED +/* This function returns the jmp_buf built in to *png_ptr. It must be + * supplied with an appropriate 'longjmp' function to use on that jmp_buf + * unless the default error function is overridden in which case NULL is + * acceptable. The size of the jmp_buf is checked against the actual size + * allocated by the library - the call will return NULL on a mismatch + * indicating an ABI mismatch. + */ +PNG_EXPORT(8, jmp_buf*, png_set_longjmp_fn, (png_structrp png_ptr, + png_longjmp_ptr longjmp_fn, size_t jmp_buf_size)); +# define png_jmpbuf(png_ptr) \ + (*png_set_longjmp_fn((png_ptr), longjmp, (sizeof (jmp_buf)))) +#else +# define png_jmpbuf(png_ptr) \ + (LIBPNG_WAS_COMPILED_WITH__PNG_NO_SETJMP) +#endif +/* This function should be used by libpng applications in place of + * longjmp(png_ptr->jmpbuf, val). If longjmp_fn() has been set, it + * will use it; otherwise it will call PNG_ABORT(). This function was + * added in libpng-1.5.0. + */ +PNG_EXPORTA(9, void, png_longjmp, (png_const_structrp png_ptr, int val), + PNG_NORETURN); + +#ifdef PNG_READ_SUPPORTED +/* Reset the compression stream */ +PNG_EXPORTA(10, int, png_reset_zstream, (png_structrp png_ptr), PNG_DEPRECATED); +#endif + +/* New functions added in libpng-1.0.2 (not enabled by default until 1.2.0) */ +#ifdef PNG_USER_MEM_SUPPORTED +PNG_EXPORTA(11, png_structp, png_create_read_struct_2, + (png_const_charp user_png_ver, png_voidp error_ptr, png_error_ptr error_fn, + png_error_ptr warn_fn, + png_voidp mem_ptr, png_malloc_ptr malloc_fn, png_free_ptr free_fn), + PNG_ALLOCATED); +PNG_EXPORTA(12, png_structp, png_create_write_struct_2, + (png_const_charp user_png_ver, png_voidp error_ptr, png_error_ptr error_fn, + png_error_ptr warn_fn, + png_voidp mem_ptr, png_malloc_ptr malloc_fn, png_free_ptr free_fn), + PNG_ALLOCATED); +#endif + +/* Write the PNG file signature. */ +PNG_EXPORT(13, void, png_write_sig, (png_structrp png_ptr)); + +/* Write a PNG chunk - size, type, (optional) data, CRC. */ +PNG_EXPORT(14, void, png_write_chunk, (png_structrp png_ptr, png_const_bytep + chunk_name, png_const_bytep data, size_t length)); + +/* Write the start of a PNG chunk - length and chunk name. */ +PNG_EXPORT(15, void, png_write_chunk_start, (png_structrp png_ptr, + png_const_bytep chunk_name, png_uint_32 length)); + +/* Write the data of a PNG chunk started with png_write_chunk_start(). */ +PNG_EXPORT(16, void, png_write_chunk_data, (png_structrp png_ptr, + png_const_bytep data, size_t length)); + +/* Finish a chunk started with png_write_chunk_start() (includes CRC). */ +PNG_EXPORT(17, void, png_write_chunk_end, (png_structrp png_ptr)); + +/* Allocate and initialize the info structure */ +PNG_EXPORTA(18, png_infop, png_create_info_struct, (png_const_structrp png_ptr), + PNG_ALLOCATED); + +/* DEPRECATED: this function allowed init structures to be created using the + * default allocation method (typically malloc). Use is deprecated in 1.6.0 and + * the API will be removed in the future. + */ +PNG_EXPORTA(19, void, png_info_init_3, (png_infopp info_ptr, + size_t png_info_struct_size), PNG_DEPRECATED); + +/* Writes all the PNG information before the image. */ +PNG_EXPORT(20, void, png_write_info_before_PLTE, + (png_structrp png_ptr, png_const_inforp info_ptr)); +PNG_EXPORT(21, void, png_write_info, + (png_structrp png_ptr, png_const_inforp info_ptr)); + +#ifdef PNG_SEQUENTIAL_READ_SUPPORTED +/* Read the information before the actual image data. */ +PNG_EXPORT(22, void, png_read_info, + (png_structrp png_ptr, png_inforp info_ptr)); +#endif + +#ifdef PNG_TIME_RFC1123_SUPPORTED + /* Convert to a US string format: there is no localization support in this + * routine. The original implementation used a 29 character buffer in + * png_struct, this will be removed in future versions. + */ +#if PNG_LIBPNG_VER < 10700 +/* To do: remove this from libpng17 (and from libpng17/png.c and pngstruct.h) */ +PNG_EXPORTA(23, png_const_charp, png_convert_to_rfc1123, (png_structrp png_ptr, + png_const_timep ptime),PNG_DEPRECATED); +#endif +PNG_EXPORT(241, int, png_convert_to_rfc1123_buffer, (char out[29], + png_const_timep ptime)); +#endif + +#ifdef PNG_CONVERT_tIME_SUPPORTED +/* Convert from a struct tm to png_time */ +PNG_EXPORT(24, void, png_convert_from_struct_tm, (png_timep ptime, + const struct tm * ttime)); + +/* Convert from time_t to png_time. Uses gmtime() */ +PNG_EXPORT(25, void, png_convert_from_time_t, (png_timep ptime, time_t ttime)); +#endif /* CONVERT_tIME */ + +#ifdef PNG_READ_EXPAND_SUPPORTED +/* Expand data to 24-bit RGB, or 8-bit grayscale, with alpha if available. */ +PNG_EXPORT(26, void, png_set_expand, (png_structrp png_ptr)); +PNG_EXPORT(27, void, png_set_expand_gray_1_2_4_to_8, (png_structrp png_ptr)); +PNG_EXPORT(28, void, png_set_palette_to_rgb, (png_structrp png_ptr)); +PNG_EXPORT(29, void, png_set_tRNS_to_alpha, (png_structrp png_ptr)); +#endif + +#ifdef PNG_READ_EXPAND_16_SUPPORTED +/* Expand to 16-bit channels, forces conversion of palette to RGB and expansion + * of a tRNS chunk if present. + */ +PNG_EXPORT(221, void, png_set_expand_16, (png_structrp png_ptr)); +#endif + +#if defined(PNG_READ_BGR_SUPPORTED) || defined(PNG_WRITE_BGR_SUPPORTED) +/* Use blue, green, red order for pixels. */ +PNG_EXPORT(30, void, png_set_bgr, (png_structrp png_ptr)); +#endif + +#ifdef PNG_READ_GRAY_TO_RGB_SUPPORTED +/* Expand the grayscale to 24-bit RGB if necessary. */ +PNG_EXPORT(31, void, png_set_gray_to_rgb, (png_structrp png_ptr)); +#endif + +#ifdef PNG_READ_RGB_TO_GRAY_SUPPORTED +/* Reduce RGB to grayscale. */ +#define PNG_ERROR_ACTION_NONE 1 +#define PNG_ERROR_ACTION_WARN 2 +#define PNG_ERROR_ACTION_ERROR 3 +#define PNG_RGB_TO_GRAY_DEFAULT (-1)/*for red/green coefficients*/ + +PNG_FP_EXPORT(32, void, png_set_rgb_to_gray, (png_structrp png_ptr, + int error_action, double red, double green)) +PNG_FIXED_EXPORT(33, void, png_set_rgb_to_gray_fixed, (png_structrp png_ptr, + int error_action, png_fixed_point red, png_fixed_point green)) + +PNG_EXPORT(34, png_byte, png_get_rgb_to_gray_status, (png_const_structrp + png_ptr)); +#endif + +#ifdef PNG_BUILD_GRAYSCALE_PALETTE_SUPPORTED +PNG_EXPORT(35, void, png_build_grayscale_palette, (int bit_depth, + png_colorp palette)); +#endif + +#ifdef PNG_READ_ALPHA_MODE_SUPPORTED +/* How the alpha channel is interpreted - this affects how the color channels + * of a PNG file are returned to the calling application when an alpha channel, + * or a tRNS chunk in a palette file, is present. + * + * This has no effect on the way pixels are written into a PNG output + * datastream. The color samples in a PNG datastream are never premultiplied + * with the alpha samples. + * + * The default is to return data according to the PNG specification: the alpha + * channel is a linear measure of the contribution of the pixel to the + * corresponding composited pixel, and the color channels are unassociated + * (not premultiplied). The gamma encoded color channels must be scaled + * according to the contribution and to do this it is necessary to undo + * the encoding, scale the color values, perform the composition and re-encode + * the values. This is the 'PNG' mode. + * + * The alternative is to 'associate' the alpha with the color information by + * storing color channel values that have been scaled by the alpha. + * image. These are the 'STANDARD', 'ASSOCIATED' or 'PREMULTIPLIED' modes + * (the latter being the two common names for associated alpha color channels). + * + * For the 'OPTIMIZED' mode, a pixel is treated as opaque only if the alpha + * value is equal to the maximum value. + * + * The final choice is to gamma encode the alpha channel as well. This is + * broken because, in practice, no implementation that uses this choice + * correctly undoes the encoding before handling alpha composition. Use this + * choice only if other serious errors in the software or hardware you use + * mandate it; the typical serious error is for dark halos to appear around + * opaque areas of the composited PNG image because of arithmetic overflow. + * + * The API function png_set_alpha_mode specifies which of these choices to use + * with an enumerated 'mode' value and the gamma of the required output: + */ +#define PNG_ALPHA_PNG 0 /* according to the PNG standard */ +#define PNG_ALPHA_STANDARD 1 /* according to Porter/Duff */ +#define PNG_ALPHA_ASSOCIATED 1 /* as above; this is the normal practice */ +#define PNG_ALPHA_PREMULTIPLIED 1 /* as above */ +#define PNG_ALPHA_OPTIMIZED 2 /* 'PNG' for opaque pixels, else 'STANDARD' */ +#define PNG_ALPHA_BROKEN 3 /* the alpha channel is gamma encoded */ + +PNG_FP_EXPORT(227, void, png_set_alpha_mode, (png_structrp png_ptr, int mode, + double output_gamma)) +PNG_FIXED_EXPORT(228, void, png_set_alpha_mode_fixed, (png_structrp png_ptr, + int mode, png_fixed_point output_gamma)) +#endif + +#if defined(PNG_GAMMA_SUPPORTED) || defined(PNG_READ_ALPHA_MODE_SUPPORTED) +/* The output_gamma value is a screen gamma in libpng terminology: it expresses + * how to decode the output values, not how they are encoded. + */ +#define PNG_DEFAULT_sRGB -1 /* sRGB gamma and color space */ +#define PNG_GAMMA_MAC_18 -2 /* Old Mac '1.8' gamma and color space */ +#define PNG_GAMMA_sRGB 220000 /* Television standards--matches sRGB gamma */ +#define PNG_GAMMA_LINEAR PNG_FP_1 /* Linear */ +#endif + +/* The following are examples of calls to png_set_alpha_mode to achieve the + * required overall gamma correction and, where necessary, alpha + * premultiplication. + * + * png_set_alpha_mode(pp, PNG_ALPHA_PNG, PNG_DEFAULT_sRGB); + * This is the default libpng handling of the alpha channel - it is not + * pre-multiplied into the color components. In addition the call states + * that the output is for a sRGB system and causes all PNG files without gAMA + * chunks to be assumed to be encoded using sRGB. + * + * png_set_alpha_mode(pp, PNG_ALPHA_PNG, PNG_GAMMA_MAC); + * In this case the output is assumed to be something like an sRGB conformant + * display preceded by a power-law lookup table of power 1.45. This is how + * early Mac systems behaved. + * + * png_set_alpha_mode(pp, PNG_ALPHA_STANDARD, PNG_GAMMA_LINEAR); + * This is the classic Jim Blinn approach and will work in academic + * environments where everything is done by the book. It has the shortcoming + * of assuming that input PNG data with no gamma information is linear - this + * is unlikely to be correct unless the PNG files where generated locally. + * Most of the time the output precision will be so low as to show + * significant banding in dark areas of the image. + * + * png_set_expand_16(pp); + * png_set_alpha_mode(pp, PNG_ALPHA_STANDARD, PNG_DEFAULT_sRGB); + * This is a somewhat more realistic Jim Blinn inspired approach. PNG files + * are assumed to have the sRGB encoding if not marked with a gamma value and + * the output is always 16 bits per component. This permits accurate scaling + * and processing of the data. If you know that your input PNG files were + * generated locally you might need to replace PNG_DEFAULT_sRGB with the + * correct value for your system. + * + * png_set_alpha_mode(pp, PNG_ALPHA_OPTIMIZED, PNG_DEFAULT_sRGB); + * If you just need to composite the PNG image onto an existing background + * and if you control the code that does this you can use the optimization + * setting. In this case you just copy completely opaque pixels to the + * output. For pixels that are not completely transparent (you just skip + * those) you do the composition math using png_composite or png_composite_16 + * below then encode the resultant 8-bit or 16-bit values to match the output + * encoding. + * + * Other cases + * If neither the PNG nor the standard linear encoding work for you because + * of the software or hardware you use then you have a big problem. The PNG + * case will probably result in halos around the image. The linear encoding + * will probably result in a washed out, too bright, image (it's actually too + * contrasty.) Try the ALPHA_OPTIMIZED mode above - this will probably + * substantially reduce the halos. Alternatively try: + * + * png_set_alpha_mode(pp, PNG_ALPHA_BROKEN, PNG_DEFAULT_sRGB); + * This option will also reduce the halos, but there will be slight dark + * halos round the opaque parts of the image where the background is light. + * In the OPTIMIZED mode the halos will be light halos where the background + * is dark. Take your pick - the halos are unavoidable unless you can get + * your hardware/software fixed! (The OPTIMIZED approach is slightly + * faster.) + * + * When the default gamma of PNG files doesn't match the output gamma. + * If you have PNG files with no gamma information png_set_alpha_mode allows + * you to provide a default gamma, but it also sets the output gamma to the + * matching value. If you know your PNG files have a gamma that doesn't + * match the output you can take advantage of the fact that + * png_set_alpha_mode always sets the output gamma but only sets the PNG + * default if it is not already set: + * + * png_set_alpha_mode(pp, PNG_ALPHA_PNG, PNG_DEFAULT_sRGB); + * png_set_alpha_mode(pp, PNG_ALPHA_PNG, PNG_GAMMA_MAC); + * The first call sets both the default and the output gamma values, the + * second call overrides the output gamma without changing the default. This + * is easier than achieving the same effect with png_set_gamma. You must use + * PNG_ALPHA_PNG for the first call - internal checking in png_set_alpha will + * fire if more than one call to png_set_alpha_mode and png_set_background is + * made in the same read operation, however multiple calls with PNG_ALPHA_PNG + * are ignored. + */ + +#ifdef PNG_READ_STRIP_ALPHA_SUPPORTED +PNG_EXPORT(36, void, png_set_strip_alpha, (png_structrp png_ptr)); +#endif + +#if defined(PNG_READ_SWAP_ALPHA_SUPPORTED) || \ + defined(PNG_WRITE_SWAP_ALPHA_SUPPORTED) +PNG_EXPORT(37, void, png_set_swap_alpha, (png_structrp png_ptr)); +#endif + +#if defined(PNG_READ_INVERT_ALPHA_SUPPORTED) || \ + defined(PNG_WRITE_INVERT_ALPHA_SUPPORTED) +PNG_EXPORT(38, void, png_set_invert_alpha, (png_structrp png_ptr)); +#endif + +#if defined(PNG_READ_FILLER_SUPPORTED) || defined(PNG_WRITE_FILLER_SUPPORTED) +/* Add a filler byte to 8-bit or 16-bit Gray or 24-bit or 48-bit RGB images. */ +PNG_EXPORT(39, void, png_set_filler, (png_structrp png_ptr, png_uint_32 filler, + int flags)); +/* The values of the PNG_FILLER_ defines should NOT be changed */ +# define PNG_FILLER_BEFORE 0 +# define PNG_FILLER_AFTER 1 +/* Add an alpha byte to 8-bit or 16-bit Gray or 24-bit or 48-bit RGB images. */ +PNG_EXPORT(40, void, png_set_add_alpha, (png_structrp png_ptr, + png_uint_32 filler, int flags)); +#endif /* READ_FILLER || WRITE_FILLER */ + +#if defined(PNG_READ_SWAP_SUPPORTED) || defined(PNG_WRITE_SWAP_SUPPORTED) +/* Swap bytes in 16-bit depth files. */ +PNG_EXPORT(41, void, png_set_swap, (png_structrp png_ptr)); +#endif + +#if defined(PNG_READ_PACK_SUPPORTED) || defined(PNG_WRITE_PACK_SUPPORTED) +/* Use 1 byte per pixel in 1, 2, or 4-bit depth files. */ +PNG_EXPORT(42, void, png_set_packing, (png_structrp png_ptr)); +#endif + +#if defined(PNG_READ_PACKSWAP_SUPPORTED) || \ + defined(PNG_WRITE_PACKSWAP_SUPPORTED) +/* Swap packing order of pixels in bytes. */ +PNG_EXPORT(43, void, png_set_packswap, (png_structrp png_ptr)); +#endif + +#if defined(PNG_READ_SHIFT_SUPPORTED) || defined(PNG_WRITE_SHIFT_SUPPORTED) +/* Converts files to legal bit depths. */ +PNG_EXPORT(44, void, png_set_shift, (png_structrp png_ptr, png_const_color_8p + true_bits)); +#endif + +#if defined(PNG_READ_INTERLACING_SUPPORTED) || \ + defined(PNG_WRITE_INTERLACING_SUPPORTED) +/* Have the code handle the interlacing. Returns the number of passes. + * MUST be called before png_read_update_info or png_start_read_image, + * otherwise it will not have the desired effect. Note that it is still + * necessary to call png_read_row or png_read_rows png_get_image_height + * times for each pass. +*/ +PNG_EXPORT(45, int, png_set_interlace_handling, (png_structrp png_ptr)); +#endif + +#if defined(PNG_READ_INVERT_SUPPORTED) || defined(PNG_WRITE_INVERT_SUPPORTED) +/* Invert monochrome files */ +PNG_EXPORT(46, void, png_set_invert_mono, (png_structrp png_ptr)); +#endif + +#ifdef PNG_READ_BACKGROUND_SUPPORTED +/* Handle alpha and tRNS by replacing with a background color. Prior to + * libpng-1.5.4 this API must not be called before the PNG file header has been + * read. Doing so will result in unexpected behavior and possible warnings or + * errors if the PNG file contains a bKGD chunk. + */ +PNG_FP_EXPORT(47, void, png_set_background, (png_structrp png_ptr, + png_const_color_16p background_color, int background_gamma_code, + int need_expand, double background_gamma)) +PNG_FIXED_EXPORT(215, void, png_set_background_fixed, (png_structrp png_ptr, + png_const_color_16p background_color, int background_gamma_code, + int need_expand, png_fixed_point background_gamma)) +#endif +#ifdef PNG_READ_BACKGROUND_SUPPORTED +# define PNG_BACKGROUND_GAMMA_UNKNOWN 0 +# define PNG_BACKGROUND_GAMMA_SCREEN 1 +# define PNG_BACKGROUND_GAMMA_FILE 2 +# define PNG_BACKGROUND_GAMMA_UNIQUE 3 +#endif + +#ifdef PNG_READ_SCALE_16_TO_8_SUPPORTED +/* Scale a 16-bit depth file down to 8-bit, accurately. */ +PNG_EXPORT(229, void, png_set_scale_16, (png_structrp png_ptr)); +#endif + +#ifdef PNG_READ_STRIP_16_TO_8_SUPPORTED +#define PNG_READ_16_TO_8_SUPPORTED /* Name prior to 1.5.4 */ +/* Strip the second byte of information from a 16-bit depth file. */ +PNG_EXPORT(48, void, png_set_strip_16, (png_structrp png_ptr)); +#endif + +#ifdef PNG_READ_QUANTIZE_SUPPORTED +/* Turn on quantizing, and reduce the palette to the number of colors + * available. + */ +PNG_EXPORT(49, void, png_set_quantize, (png_structrp png_ptr, + png_colorp palette, int num_palette, int maximum_colors, + png_const_uint_16p histogram, int full_quantize)); +#endif + +#ifdef PNG_READ_GAMMA_SUPPORTED +/* The threshold on gamma processing is configurable but hard-wired into the + * library. The following is the floating point variant. + */ +#define PNG_GAMMA_THRESHOLD (PNG_GAMMA_THRESHOLD_FIXED*.00001) + +/* Handle gamma correction. Screen_gamma=(display_exponent). + * NOTE: this API simply sets the screen and file gamma values. It will + * therefore override the value for gamma in a PNG file if it is called after + * the file header has been read - use with care - call before reading the PNG + * file for best results! + * + * These routines accept the same gamma values as png_set_alpha_mode (described + * above). The PNG_GAMMA_ defines and PNG_DEFAULT_sRGB can be passed to either + * API (floating point or fixed.) Notice, however, that the 'file_gamma' value + * is the inverse of a 'screen gamma' value. + */ +PNG_FP_EXPORT(50, void, png_set_gamma, (png_structrp png_ptr, + double screen_gamma, double override_file_gamma)) +PNG_FIXED_EXPORT(208, void, png_set_gamma_fixed, (png_structrp png_ptr, + png_fixed_point screen_gamma, png_fixed_point override_file_gamma)) +#endif + +#ifdef PNG_WRITE_FLUSH_SUPPORTED +/* Set how many lines between output flushes - 0 for no flushing */ +PNG_EXPORT(51, void, png_set_flush, (png_structrp png_ptr, int nrows)); +/* Flush the current PNG output buffer */ +PNG_EXPORT(52, void, png_write_flush, (png_structrp png_ptr)); +#endif + +/* Optional update palette with requested transformations */ +PNG_EXPORT(53, void, png_start_read_image, (png_structrp png_ptr)); + +/* Optional call to update the users info structure */ +PNG_EXPORT(54, void, png_read_update_info, (png_structrp png_ptr, + png_inforp info_ptr)); + +#ifdef PNG_SEQUENTIAL_READ_SUPPORTED +/* Read one or more rows of image data. */ +PNG_EXPORT(55, void, png_read_rows, (png_structrp png_ptr, png_bytepp row, + png_bytepp display_row, png_uint_32 num_rows)); +#endif + +#ifdef PNG_SEQUENTIAL_READ_SUPPORTED +/* Read a row of data. */ +PNG_EXPORT(56, void, png_read_row, (png_structrp png_ptr, png_bytep row, + png_bytep display_row)); +#endif + +#ifdef PNG_SEQUENTIAL_READ_SUPPORTED +/* Read the whole image into memory at once. */ +PNG_EXPORT(57, void, png_read_image, (png_structrp png_ptr, png_bytepp image)); +#endif + +/* Write a row of image data */ +PNG_EXPORT(58, void, png_write_row, (png_structrp png_ptr, + png_const_bytep row)); + +/* Write a few rows of image data: (*row) is not written; however, the type + * is declared as writeable to maintain compatibility with previous versions + * of libpng and to allow the 'display_row' array from read_rows to be passed + * unchanged to write_rows. + */ +PNG_EXPORT(59, void, png_write_rows, (png_structrp png_ptr, png_bytepp row, + png_uint_32 num_rows)); + +/* Write the image data */ +PNG_EXPORT(60, void, png_write_image, (png_structrp png_ptr, png_bytepp image)); + +/* Write the end of the PNG file. */ +PNG_EXPORT(61, void, png_write_end, (png_structrp png_ptr, + png_inforp info_ptr)); + +#ifdef PNG_SEQUENTIAL_READ_SUPPORTED +/* Read the end of the PNG file. */ +PNG_EXPORT(62, void, png_read_end, (png_structrp png_ptr, png_inforp info_ptr)); +#endif + +/* Free any memory associated with the png_info_struct */ +PNG_EXPORT(63, void, png_destroy_info_struct, (png_const_structrp png_ptr, + png_infopp info_ptr_ptr)); + +/* Free any memory associated with the png_struct and the png_info_structs */ +PNG_EXPORT(64, void, png_destroy_read_struct, (png_structpp png_ptr_ptr, + png_infopp info_ptr_ptr, png_infopp end_info_ptr_ptr)); + +/* Free any memory associated with the png_struct and the png_info_structs */ +PNG_EXPORT(65, void, png_destroy_write_struct, (png_structpp png_ptr_ptr, + png_infopp info_ptr_ptr)); + +/* Set the libpng method of handling chunk CRC errors */ +PNG_EXPORT(66, void, png_set_crc_action, (png_structrp png_ptr, int crit_action, + int ancil_action)); + +/* Values for png_set_crc_action() say how to handle CRC errors in + * ancillary and critical chunks, and whether to use the data contained + * therein. Note that it is impossible to "discard" data in a critical + * chunk. For versions prior to 0.90, the action was always error/quit, + * whereas in version 0.90 and later, the action for CRC errors in ancillary + * chunks is warn/discard. These values should NOT be changed. + * + * value action:critical action:ancillary + */ +#define PNG_CRC_DEFAULT 0 /* error/quit warn/discard data */ +#define PNG_CRC_ERROR_QUIT 1 /* error/quit error/quit */ +#define PNG_CRC_WARN_DISCARD 2 /* (INVALID) warn/discard data */ +#define PNG_CRC_WARN_USE 3 /* warn/use data warn/use data */ +#define PNG_CRC_QUIET_USE 4 /* quiet/use data quiet/use data */ +#define PNG_CRC_NO_CHANGE 5 /* use current value use current value */ + +#ifdef PNG_WRITE_SUPPORTED +/* These functions give the user control over the scan-line filtering in + * libpng and the compression methods used by zlib. These functions are + * mainly useful for testing, as the defaults should work with most users. + * Those users who are tight on memory or want faster performance at the + * expense of compression can modify them. See the compression library + * header file (zlib.h) for an explanation of the compression functions. + */ + +/* Set the filtering method(s) used by libpng. Currently, the only valid + * value for "method" is 0. + */ +PNG_EXPORT(67, void, png_set_filter, (png_structrp png_ptr, int method, + int filters)); +#endif /* WRITE */ + +/* Flags for png_set_filter() to say which filters to use. The flags + * are chosen so that they don't conflict with real filter types + * below, in case they are supplied instead of the #defined constants. + * These values should NOT be changed. + */ +#define PNG_NO_FILTERS 0x00 +#define PNG_FILTER_NONE 0x08 +#define PNG_FILTER_SUB 0x10 +#define PNG_FILTER_UP 0x20 +#define PNG_FILTER_AVG 0x40 +#define PNG_FILTER_PAETH 0x80 +#define PNG_FAST_FILTERS (PNG_FILTER_NONE | PNG_FILTER_SUB | PNG_FILTER_UP) +#define PNG_ALL_FILTERS (PNG_FAST_FILTERS | PNG_FILTER_AVG | PNG_FILTER_PAETH) + +/* Filter values (not flags) - used in pngwrite.c, pngwutil.c for now. + * These defines should NOT be changed. + */ +#define PNG_FILTER_VALUE_NONE 0 +#define PNG_FILTER_VALUE_SUB 1 +#define PNG_FILTER_VALUE_UP 2 +#define PNG_FILTER_VALUE_AVG 3 +#define PNG_FILTER_VALUE_PAETH 4 +#define PNG_FILTER_VALUE_LAST 5 + +#ifdef PNG_WRITE_SUPPORTED +#ifdef PNG_WRITE_WEIGHTED_FILTER_SUPPORTED /* DEPRECATED */ +PNG_FP_EXPORT(68, void, png_set_filter_heuristics, (png_structrp png_ptr, + int heuristic_method, int num_weights, png_const_doublep filter_weights, + png_const_doublep filter_costs)) +PNG_FIXED_EXPORT(209, void, png_set_filter_heuristics_fixed, + (png_structrp png_ptr, int heuristic_method, int num_weights, + png_const_fixed_point_p filter_weights, + png_const_fixed_point_p filter_costs)) +#endif /* WRITE_WEIGHTED_FILTER */ + +/* The following are no longer used and will be removed from libpng-1.7: */ +#define PNG_FILTER_HEURISTIC_DEFAULT 0 /* Currently "UNWEIGHTED" */ +#define PNG_FILTER_HEURISTIC_UNWEIGHTED 1 /* Used by libpng < 0.95 */ +#define PNG_FILTER_HEURISTIC_WEIGHTED 2 /* Experimental feature */ +#define PNG_FILTER_HEURISTIC_LAST 3 /* Not a valid value */ + +/* Set the library compression level. Currently, valid values range from + * 0 - 9, corresponding directly to the zlib compression levels 0 - 9 + * (0 - no compression, 9 - "maximal" compression). Note that tests have + * shown that zlib compression levels 3-6 usually perform as well as level 9 + * for PNG images, and do considerably fewer calculations. In the future, + * these values may not correspond directly to the zlib compression levels. + */ +#ifdef PNG_WRITE_CUSTOMIZE_COMPRESSION_SUPPORTED +PNG_EXPORT(69, void, png_set_compression_level, (png_structrp png_ptr, + int level)); + +PNG_EXPORT(70, void, png_set_compression_mem_level, (png_structrp png_ptr, + int mem_level)); + +PNG_EXPORT(71, void, png_set_compression_strategy, (png_structrp png_ptr, + int strategy)); + +/* If PNG_WRITE_OPTIMIZE_CMF_SUPPORTED is defined, libpng will use a + * smaller value of window_bits if it can do so safely. + */ +PNG_EXPORT(72, void, png_set_compression_window_bits, (png_structrp png_ptr, + int window_bits)); + +PNG_EXPORT(73, void, png_set_compression_method, (png_structrp png_ptr, + int method)); +#endif /* WRITE_CUSTOMIZE_COMPRESSION */ + +#ifdef PNG_WRITE_CUSTOMIZE_ZTXT_COMPRESSION_SUPPORTED +/* Also set zlib parameters for compressing non-IDAT chunks */ +PNG_EXPORT(222, void, png_set_text_compression_level, (png_structrp png_ptr, + int level)); + +PNG_EXPORT(223, void, png_set_text_compression_mem_level, (png_structrp png_ptr, + int mem_level)); + +PNG_EXPORT(224, void, png_set_text_compression_strategy, (png_structrp png_ptr, + int strategy)); + +/* If PNG_WRITE_OPTIMIZE_CMF_SUPPORTED is defined, libpng will use a + * smaller value of window_bits if it can do so safely. + */ +PNG_EXPORT(225, void, png_set_text_compression_window_bits, + (png_structrp png_ptr, int window_bits)); + +PNG_EXPORT(226, void, png_set_text_compression_method, (png_structrp png_ptr, + int method)); +#endif /* WRITE_CUSTOMIZE_ZTXT_COMPRESSION */ +#endif /* WRITE */ + +/* These next functions are called for input/output, memory, and error + * handling. They are in the file pngrio.c, pngwio.c, and pngerror.c, + * and call standard C I/O routines such as fread(), fwrite(), and + * fprintf(). These functions can be made to use other I/O routines + * at run time for those applications that need to handle I/O in a + * different manner by calling png_set_???_fn(). See libpng-manual.txt for + * more information. + */ + +#ifdef PNG_STDIO_SUPPORTED +/* Initialize the input/output for the PNG file to the default functions. */ +PNG_EXPORT(74, void, png_init_io, (png_structrp png_ptr, png_FILE_p fp)); +#endif + +/* Replace the (error and abort), and warning functions with user + * supplied functions. If no messages are to be printed you must still + * write and use replacement functions. The replacement error_fn should + * still do a longjmp to the last setjmp location if you are using this + * method of error handling. If error_fn or warning_fn is NULL, the + * default function will be used. + */ + +PNG_EXPORT(75, void, png_set_error_fn, (png_structrp png_ptr, + png_voidp error_ptr, png_error_ptr error_fn, png_error_ptr warning_fn)); + +/* Return the user pointer associated with the error functions */ +PNG_EXPORT(76, png_voidp, png_get_error_ptr, (png_const_structrp png_ptr)); + +/* Replace the default data output functions with a user supplied one(s). + * If buffered output is not used, then output_flush_fn can be set to NULL. + * If PNG_WRITE_FLUSH_SUPPORTED is not defined at libpng compile time + * output_flush_fn will be ignored (and thus can be NULL). + * It is probably a mistake to use NULL for output_flush_fn if + * write_data_fn is not also NULL unless you have built libpng with + * PNG_WRITE_FLUSH_SUPPORTED undefined, because in this case libpng's + * default flush function, which uses the standard *FILE structure, will + * be used. + */ +PNG_EXPORT(77, void, png_set_write_fn, (png_structrp png_ptr, png_voidp io_ptr, + png_rw_ptr write_data_fn, png_flush_ptr output_flush_fn)); + +/* Replace the default data input function with a user supplied one. */ +PNG_EXPORT(78, void, png_set_read_fn, (png_structrp png_ptr, png_voidp io_ptr, + png_rw_ptr read_data_fn)); + +/* Return the user pointer associated with the I/O functions */ +PNG_EXPORT(79, png_voidp, png_get_io_ptr, (png_const_structrp png_ptr)); + +PNG_EXPORT(80, void, png_set_read_status_fn, (png_structrp png_ptr, + png_read_status_ptr read_row_fn)); + +PNG_EXPORT(81, void, png_set_write_status_fn, (png_structrp png_ptr, + png_write_status_ptr write_row_fn)); + +#ifdef PNG_USER_MEM_SUPPORTED +/* Replace the default memory allocation functions with user supplied one(s). */ +PNG_EXPORT(82, void, png_set_mem_fn, (png_structrp png_ptr, png_voidp mem_ptr, + png_malloc_ptr malloc_fn, png_free_ptr free_fn)); +/* Return the user pointer associated with the memory functions */ +PNG_EXPORT(83, png_voidp, png_get_mem_ptr, (png_const_structrp png_ptr)); +#endif + +#ifdef PNG_READ_USER_TRANSFORM_SUPPORTED +PNG_EXPORT(84, void, png_set_read_user_transform_fn, (png_structrp png_ptr, + png_user_transform_ptr read_user_transform_fn)); +#endif + +#ifdef PNG_WRITE_USER_TRANSFORM_SUPPORTED +PNG_EXPORT(85, void, png_set_write_user_transform_fn, (png_structrp png_ptr, + png_user_transform_ptr write_user_transform_fn)); +#endif + +#ifdef PNG_USER_TRANSFORM_PTR_SUPPORTED +PNG_EXPORT(86, void, png_set_user_transform_info, (png_structrp png_ptr, + png_voidp user_transform_ptr, int user_transform_depth, + int user_transform_channels)); +/* Return the user pointer associated with the user transform functions */ +PNG_EXPORT(87, png_voidp, png_get_user_transform_ptr, + (png_const_structrp png_ptr)); +#endif + +#ifdef PNG_USER_TRANSFORM_INFO_SUPPORTED +/* Return information about the row currently being processed. Note that these + * APIs do not fail but will return unexpected results if called outside a user + * transform callback. Also note that when transforming an interlaced image the + * row number is the row number within the sub-image of the interlace pass, so + * the value will increase to the height of the sub-image (not the full image) + * then reset to 0 for the next pass. + * + * Use PNG_ROW_FROM_PASS_ROW(row, pass) and PNG_COL_FROM_PASS_COL(col, pass) to + * find the output pixel (x,y) given an interlaced sub-image pixel + * (row,col,pass). (See below for these macros.) + */ +PNG_EXPORT(217, png_uint_32, png_get_current_row_number, (png_const_structrp)); +PNG_EXPORT(218, png_byte, png_get_current_pass_number, (png_const_structrp)); +#endif + +#ifdef PNG_READ_USER_CHUNKS_SUPPORTED +/* This callback is called only for *unknown* chunks. If + * PNG_HANDLE_AS_UNKNOWN_SUPPORTED is set then it is possible to set known + * chunks to be treated as unknown, however in this case the callback must do + * any processing required by the chunk (e.g. by calling the appropriate + * png_set_ APIs.) + * + * There is no write support - on write, by default, all the chunks in the + * 'unknown' list are written in the specified position. + * + * The integer return from the callback function is interpreted thus: + * + * negative: An error occurred; png_chunk_error will be called. + * zero: The chunk was not handled, the chunk will be saved. A critical + * chunk will cause an error at this point unless it is to be saved. + * positive: The chunk was handled, libpng will ignore/discard it. + * + * See "INTERACTION WITH USER CHUNK CALLBACKS" below for important notes about + * how this behavior will change in libpng 1.7 + */ +PNG_EXPORT(88, void, png_set_read_user_chunk_fn, (png_structrp png_ptr, + png_voidp user_chunk_ptr, png_user_chunk_ptr read_user_chunk_fn)); +#endif + +#ifdef PNG_USER_CHUNKS_SUPPORTED +PNG_EXPORT(89, png_voidp, png_get_user_chunk_ptr, (png_const_structrp png_ptr)); +#endif + +#ifdef PNG_PROGRESSIVE_READ_SUPPORTED +/* Sets the function callbacks for the push reader, and a pointer to a + * user-defined structure available to the callback functions. + */ +PNG_EXPORT(90, void, png_set_progressive_read_fn, (png_structrp png_ptr, + png_voidp progressive_ptr, png_progressive_info_ptr info_fn, + png_progressive_row_ptr row_fn, png_progressive_end_ptr end_fn)); + +/* Returns the user pointer associated with the push read functions */ +PNG_EXPORT(91, png_voidp, png_get_progressive_ptr, + (png_const_structrp png_ptr)); + +/* Function to be called when data becomes available */ +PNG_EXPORT(92, void, png_process_data, (png_structrp png_ptr, + png_inforp info_ptr, png_bytep buffer, size_t buffer_size)); + +/* A function which may be called *only* within png_process_data to stop the + * processing of any more data. The function returns the number of bytes + * remaining, excluding any that libpng has cached internally. A subsequent + * call to png_process_data must supply these bytes again. If the argument + * 'save' is set to true the routine will first save all the pending data and + * will always return 0. + */ +PNG_EXPORT(219, size_t, png_process_data_pause, (png_structrp, int save)); + +/* A function which may be called *only* outside (after) a call to + * png_process_data. It returns the number of bytes of data to skip in the + * input. Normally it will return 0, but if it returns a non-zero value the + * application must skip than number of bytes of input data and pass the + * following data to the next call to png_process_data. + */ +PNG_EXPORT(220, png_uint_32, png_process_data_skip, (png_structrp)); + +/* Function that combines rows. 'new_row' is a flag that should come from + * the callback and be non-NULL if anything needs to be done; the library + * stores its own version of the new data internally and ignores the passed + * in value. + */ +PNG_EXPORT(93, void, png_progressive_combine_row, (png_const_structrp png_ptr, + png_bytep old_row, png_const_bytep new_row)); +#endif /* PROGRESSIVE_READ */ + +PNG_EXPORTA(94, png_voidp, png_malloc, (png_const_structrp png_ptr, + png_alloc_size_t size), PNG_ALLOCATED); +/* Added at libpng version 1.4.0 */ +PNG_EXPORTA(95, png_voidp, png_calloc, (png_const_structrp png_ptr, + png_alloc_size_t size), PNG_ALLOCATED); + +/* Added at libpng version 1.2.4 */ +PNG_EXPORTA(96, png_voidp, png_malloc_warn, (png_const_structrp png_ptr, + png_alloc_size_t size), PNG_ALLOCATED); + +/* Frees a pointer allocated by png_malloc() */ +PNG_EXPORT(97, void, png_free, (png_const_structrp png_ptr, png_voidp ptr)); + +/* Free data that was allocated internally */ +PNG_EXPORT(98, void, png_free_data, (png_const_structrp png_ptr, + png_inforp info_ptr, png_uint_32 free_me, int num)); + +/* Reassign the responsibility for freeing existing data, whether allocated + * by libpng or by the application; this works on the png_info structure passed + * in, without changing the state for other png_info structures. + */ +PNG_EXPORT(99, void, png_data_freer, (png_const_structrp png_ptr, + png_inforp info_ptr, int freer, png_uint_32 mask)); + +/* Assignments for png_data_freer */ +#define PNG_DESTROY_WILL_FREE_DATA 1 +#define PNG_SET_WILL_FREE_DATA 1 +#define PNG_USER_WILL_FREE_DATA 2 +/* Flags for png_ptr->free_me and info_ptr->free_me */ +#define PNG_FREE_HIST 0x0008U +#define PNG_FREE_ICCP 0x0010U +#define PNG_FREE_SPLT 0x0020U +#define PNG_FREE_ROWS 0x0040U +#define PNG_FREE_PCAL 0x0080U +#define PNG_FREE_SCAL 0x0100U +#ifdef PNG_STORE_UNKNOWN_CHUNKS_SUPPORTED +# define PNG_FREE_UNKN 0x0200U +#endif +/* PNG_FREE_LIST 0x0400U removed in 1.6.0 because it is ignored */ +#define PNG_FREE_PLTE 0x1000U +#define PNG_FREE_TRNS 0x2000U +#define PNG_FREE_TEXT 0x4000U +#define PNG_FREE_EXIF 0x8000U /* Added at libpng-1.6.31 */ +#define PNG_FREE_ALL 0xffffU +#define PNG_FREE_MUL 0x4220U /* PNG_FREE_SPLT|PNG_FREE_TEXT|PNG_FREE_UNKN */ + +#ifdef PNG_USER_MEM_SUPPORTED +PNG_EXPORTA(100, png_voidp, png_malloc_default, (png_const_structrp png_ptr, + png_alloc_size_t size), PNG_ALLOCATED PNG_DEPRECATED); +PNG_EXPORTA(101, void, png_free_default, (png_const_structrp png_ptr, + png_voidp ptr), PNG_DEPRECATED); +#endif + +#ifdef PNG_ERROR_TEXT_SUPPORTED +/* Fatal error in PNG image of libpng - can't continue */ +PNG_EXPORTA(102, void, png_error, (png_const_structrp png_ptr, + png_const_charp error_message), PNG_NORETURN); + +/* The same, but the chunk name is prepended to the error string. */ +PNG_EXPORTA(103, void, png_chunk_error, (png_const_structrp png_ptr, + png_const_charp error_message), PNG_NORETURN); + +#else +/* Fatal error in PNG image of libpng - can't continue */ +PNG_EXPORTA(104, void, png_err, (png_const_structrp png_ptr), PNG_NORETURN); +# define png_error(s1,s2) png_err(s1) +# define png_chunk_error(s1,s2) png_err(s1) +#endif + +#ifdef PNG_WARNINGS_SUPPORTED +/* Non-fatal error in libpng. Can continue, but may have a problem. */ +PNG_EXPORT(105, void, png_warning, (png_const_structrp png_ptr, + png_const_charp warning_message)); + +/* Non-fatal error in libpng, chunk name is prepended to message. */ +PNG_EXPORT(106, void, png_chunk_warning, (png_const_structrp png_ptr, + png_const_charp warning_message)); +#else +# define png_warning(s1,s2) ((void)(s1)) +# define png_chunk_warning(s1,s2) ((void)(s1)) +#endif + +#ifdef PNG_BENIGN_ERRORS_SUPPORTED +/* Benign error in libpng. Can continue, but may have a problem. + * User can choose whether to handle as a fatal error or as a warning. */ +PNG_EXPORT(107, void, png_benign_error, (png_const_structrp png_ptr, + png_const_charp warning_message)); + +#ifdef PNG_READ_SUPPORTED +/* Same, chunk name is prepended to message (only during read) */ +PNG_EXPORT(108, void, png_chunk_benign_error, (png_const_structrp png_ptr, + png_const_charp warning_message)); +#endif + +PNG_EXPORT(109, void, png_set_benign_errors, + (png_structrp png_ptr, int allowed)); +#else +# ifdef PNG_ALLOW_BENIGN_ERRORS +# define png_benign_error png_warning +# define png_chunk_benign_error png_chunk_warning +# else +# define png_benign_error png_error +# define png_chunk_benign_error png_chunk_error +# endif +#endif + +/* The png_set_ functions are for storing values in the png_info_struct. + * Similarly, the png_get_ calls are used to read values from the + * png_info_struct, either storing the parameters in the passed variables, or + * setting pointers into the png_info_struct where the data is stored. The + * png_get_ functions return a non-zero value if the data was available + * in info_ptr, or return zero and do not change any of the parameters if the + * data was not available. + * + * These functions should be used instead of directly accessing png_info + * to avoid problems with future changes in the size and internal layout of + * png_info_struct. + */ +/* Returns "flag" if chunk data is valid in info_ptr. */ +PNG_EXPORT(110, png_uint_32, png_get_valid, (png_const_structrp png_ptr, + png_const_inforp info_ptr, png_uint_32 flag)); + +/* Returns number of bytes needed to hold a transformed row. */ +PNG_EXPORT(111, size_t, png_get_rowbytes, (png_const_structrp png_ptr, + png_const_inforp info_ptr)); + +#ifdef PNG_INFO_IMAGE_SUPPORTED +/* Returns row_pointers, which is an array of pointers to scanlines that was + * returned from png_read_png(). + */ +PNG_EXPORT(112, png_bytepp, png_get_rows, (png_const_structrp png_ptr, + png_const_inforp info_ptr)); + +/* Set row_pointers, which is an array of pointers to scanlines for use + * by png_write_png(). + */ +PNG_EXPORT(113, void, png_set_rows, (png_const_structrp png_ptr, + png_inforp info_ptr, png_bytepp row_pointers)); +#endif + +/* Returns number of color channels in image. */ +PNG_EXPORT(114, png_byte, png_get_channels, (png_const_structrp png_ptr, + png_const_inforp info_ptr)); + +#ifdef PNG_EASY_ACCESS_SUPPORTED +/* Returns image width in pixels. */ +PNG_EXPORT(115, png_uint_32, png_get_image_width, (png_const_structrp png_ptr, + png_const_inforp info_ptr)); + +/* Returns image height in pixels. */ +PNG_EXPORT(116, png_uint_32, png_get_image_height, (png_const_structrp png_ptr, + png_const_inforp info_ptr)); + +/* Returns image bit_depth. */ +PNG_EXPORT(117, png_byte, png_get_bit_depth, (png_const_structrp png_ptr, + png_const_inforp info_ptr)); + +/* Returns image color_type. */ +PNG_EXPORT(118, png_byte, png_get_color_type, (png_const_structrp png_ptr, + png_const_inforp info_ptr)); + +/* Returns image filter_type. */ +PNG_EXPORT(119, png_byte, png_get_filter_type, (png_const_structrp png_ptr, + png_const_inforp info_ptr)); + +/* Returns image interlace_type. */ +PNG_EXPORT(120, png_byte, png_get_interlace_type, (png_const_structrp png_ptr, + png_const_inforp info_ptr)); + +/* Returns image compression_type. */ +PNG_EXPORT(121, png_byte, png_get_compression_type, (png_const_structrp png_ptr, + png_const_inforp info_ptr)); + +/* Returns image resolution in pixels per meter, from pHYs chunk data. */ +PNG_EXPORT(122, png_uint_32, png_get_pixels_per_meter, + (png_const_structrp png_ptr, png_const_inforp info_ptr)); +PNG_EXPORT(123, png_uint_32, png_get_x_pixels_per_meter, + (png_const_structrp png_ptr, png_const_inforp info_ptr)); +PNG_EXPORT(124, png_uint_32, png_get_y_pixels_per_meter, + (png_const_structrp png_ptr, png_const_inforp info_ptr)); + +/* Returns pixel aspect ratio, computed from pHYs chunk data. */ +PNG_FP_EXPORT(125, float, png_get_pixel_aspect_ratio, + (png_const_structrp png_ptr, png_const_inforp info_ptr)) +PNG_FIXED_EXPORT(210, png_fixed_point, png_get_pixel_aspect_ratio_fixed, + (png_const_structrp png_ptr, png_const_inforp info_ptr)) + +/* Returns image x, y offset in pixels or microns, from oFFs chunk data. */ +PNG_EXPORT(126, png_int_32, png_get_x_offset_pixels, + (png_const_structrp png_ptr, png_const_inforp info_ptr)); +PNG_EXPORT(127, png_int_32, png_get_y_offset_pixels, + (png_const_structrp png_ptr, png_const_inforp info_ptr)); +PNG_EXPORT(128, png_int_32, png_get_x_offset_microns, + (png_const_structrp png_ptr, png_const_inforp info_ptr)); +PNG_EXPORT(129, png_int_32, png_get_y_offset_microns, + (png_const_structrp png_ptr, png_const_inforp info_ptr)); + +#endif /* EASY_ACCESS */ + +#ifdef PNG_READ_SUPPORTED +/* Returns pointer to signature string read from PNG header */ +PNG_EXPORT(130, png_const_bytep, png_get_signature, (png_const_structrp png_ptr, + png_const_inforp info_ptr)); +#endif + +#ifdef PNG_bKGD_SUPPORTED +PNG_EXPORT(131, png_uint_32, png_get_bKGD, (png_const_structrp png_ptr, + png_inforp info_ptr, png_color_16p *background)); +#endif + +#ifdef PNG_bKGD_SUPPORTED +PNG_EXPORT(132, void, png_set_bKGD, (png_const_structrp png_ptr, + png_inforp info_ptr, png_const_color_16p background)); +#endif + +#ifdef PNG_cHRM_SUPPORTED +PNG_FP_EXPORT(133, png_uint_32, png_get_cHRM, (png_const_structrp png_ptr, + png_const_inforp info_ptr, double *white_x, double *white_y, double *red_x, + double *red_y, double *green_x, double *green_y, double *blue_x, + double *blue_y)) +PNG_FP_EXPORT(230, png_uint_32, png_get_cHRM_XYZ, (png_const_structrp png_ptr, + png_const_inforp info_ptr, double *red_X, double *red_Y, double *red_Z, + double *green_X, double *green_Y, double *green_Z, double *blue_X, + double *blue_Y, double *blue_Z)) +PNG_FIXED_EXPORT(134, png_uint_32, png_get_cHRM_fixed, + (png_const_structrp png_ptr, png_const_inforp info_ptr, + png_fixed_point *int_white_x, png_fixed_point *int_white_y, + png_fixed_point *int_red_x, png_fixed_point *int_red_y, + png_fixed_point *int_green_x, png_fixed_point *int_green_y, + png_fixed_point *int_blue_x, png_fixed_point *int_blue_y)) +PNG_FIXED_EXPORT(231, png_uint_32, png_get_cHRM_XYZ_fixed, + (png_const_structrp png_ptr, png_const_inforp info_ptr, + png_fixed_point *int_red_X, png_fixed_point *int_red_Y, + png_fixed_point *int_red_Z, png_fixed_point *int_green_X, + png_fixed_point *int_green_Y, png_fixed_point *int_green_Z, + png_fixed_point *int_blue_X, png_fixed_point *int_blue_Y, + png_fixed_point *int_blue_Z)) +#endif + +#ifdef PNG_cHRM_SUPPORTED +PNG_FP_EXPORT(135, void, png_set_cHRM, (png_const_structrp png_ptr, + png_inforp info_ptr, + double white_x, double white_y, double red_x, double red_y, double green_x, + double green_y, double blue_x, double blue_y)) +PNG_FP_EXPORT(232, void, png_set_cHRM_XYZ, (png_const_structrp png_ptr, + png_inforp info_ptr, double red_X, double red_Y, double red_Z, + double green_X, double green_Y, double green_Z, double blue_X, + double blue_Y, double blue_Z)) +PNG_FIXED_EXPORT(136, void, png_set_cHRM_fixed, (png_const_structrp png_ptr, + png_inforp info_ptr, png_fixed_point int_white_x, + png_fixed_point int_white_y, png_fixed_point int_red_x, + png_fixed_point int_red_y, png_fixed_point int_green_x, + png_fixed_point int_green_y, png_fixed_point int_blue_x, + png_fixed_point int_blue_y)) +PNG_FIXED_EXPORT(233, void, png_set_cHRM_XYZ_fixed, (png_const_structrp png_ptr, + png_inforp info_ptr, png_fixed_point int_red_X, png_fixed_point int_red_Y, + png_fixed_point int_red_Z, png_fixed_point int_green_X, + png_fixed_point int_green_Y, png_fixed_point int_green_Z, + png_fixed_point int_blue_X, png_fixed_point int_blue_Y, + png_fixed_point int_blue_Z)) +#endif + +#ifdef PNG_cICP_SUPPORTED +PNG_EXPORT(250, png_uint_32, png_get_cICP, (png_const_structrp png_ptr, + png_const_inforp info_ptr, png_bytep colour_primaries, + png_bytep transfer_function, png_bytep matrix_coefficients, + png_bytep video_full_range_flag)); +#endif + +#ifdef PNG_cICP_SUPPORTED +PNG_EXPORT(251, void, png_set_cICP, (png_const_structrp png_ptr, + png_inforp info_ptr, png_byte colour_primaries, + png_byte transfer_function, png_byte matrix_coefficients, + png_byte video_full_range_flag)); +#endif + +#ifdef PNG_cLLI_SUPPORTED +PNG_FP_EXPORT(252, png_uint_32, png_get_cLLI, (png_const_structrp png_ptr, + png_const_inforp info_ptr, double *maximum_content_light_level, + double *maximum_frame_average_light_level)) +PNG_FIXED_EXPORT(253, png_uint_32, png_get_cLLI_fixed, + (png_const_structrp png_ptr, png_const_inforp info_ptr, + /* The values below are in cd/m2 (nits) and are scaled by 10,000; not + * 100,000 as in the case of png_fixed_point. + */ + png_uint_32p maximum_content_light_level_scaled_by_10000, + png_uint_32p maximum_frame_average_light_level_scaled_by_10000)) +#endif + +#ifdef PNG_cLLI_SUPPORTED +PNG_FP_EXPORT(254, void, png_set_cLLI, (png_const_structrp png_ptr, + png_inforp info_ptr, double maximum_content_light_level, + double maximum_frame_average_light_level)) +PNG_FIXED_EXPORT(255, void, png_set_cLLI_fixed, (png_const_structrp png_ptr, + png_inforp info_ptr, + /* The values below are in cd/m2 (nits) and are scaled by 10,000; not + * 100,000 as in the case of png_fixed_point. + */ + png_uint_32 maximum_content_light_level_scaled_by_10000, + png_uint_32 maximum_frame_average_light_level_scaled_by_10000)) +#endif + +#ifdef PNG_eXIf_SUPPORTED +PNG_EXPORT(246, png_uint_32, png_get_eXIf, (png_const_structrp png_ptr, + png_inforp info_ptr, png_bytep *exif)); +PNG_EXPORT(247, void, png_set_eXIf, (png_const_structrp png_ptr, + png_inforp info_ptr, png_bytep exif)); + +PNG_EXPORT(248, png_uint_32, png_get_eXIf_1, (png_const_structrp png_ptr, + png_const_inforp info_ptr, png_uint_32 *num_exif, png_bytep *exif)); +PNG_EXPORT(249, void, png_set_eXIf_1, (png_const_structrp png_ptr, + png_inforp info_ptr, png_uint_32 num_exif, png_bytep exif)); +#endif + +#ifdef PNG_gAMA_SUPPORTED +PNG_FP_EXPORT(137, png_uint_32, png_get_gAMA, (png_const_structrp png_ptr, + png_const_inforp info_ptr, double *file_gamma)) +PNG_FIXED_EXPORT(138, png_uint_32, png_get_gAMA_fixed, + (png_const_structrp png_ptr, png_const_inforp info_ptr, + png_fixed_point *int_file_gamma)) +#endif + +#ifdef PNG_gAMA_SUPPORTED +PNG_FP_EXPORT(139, void, png_set_gAMA, (png_const_structrp png_ptr, + png_inforp info_ptr, double file_gamma)) +PNG_FIXED_EXPORT(140, void, png_set_gAMA_fixed, (png_const_structrp png_ptr, + png_inforp info_ptr, png_fixed_point int_file_gamma)) +#endif + +#ifdef PNG_hIST_SUPPORTED +PNG_EXPORT(141, png_uint_32, png_get_hIST, (png_const_structrp png_ptr, + png_inforp info_ptr, png_uint_16p *hist)); +PNG_EXPORT(142, void, png_set_hIST, (png_const_structrp png_ptr, + png_inforp info_ptr, png_const_uint_16p hist)); +#endif + +PNG_EXPORT(143, png_uint_32, png_get_IHDR, (png_const_structrp png_ptr, + png_const_inforp info_ptr, png_uint_32 *width, png_uint_32 *height, + int *bit_depth, int *color_type, int *interlace_method, + int *compression_method, int *filter_method)); + +PNG_EXPORT(144, void, png_set_IHDR, (png_const_structrp png_ptr, + png_inforp info_ptr, png_uint_32 width, png_uint_32 height, int bit_depth, + int color_type, int interlace_method, int compression_method, + int filter_method)); + +#ifdef PNG_mDCV_SUPPORTED +PNG_FP_EXPORT(256, png_uint_32, png_get_mDCV, (png_const_structrp png_ptr, + png_const_inforp info_ptr, + /* The chromaticities of the mastering display. As cHRM, but independent of + * the encoding endpoints in cHRM, or cICP, or iCCP. These values will + * always be in the range 0 to 1.3107. + */ + double *white_x, double *white_y, double *red_x, double *red_y, + double *green_x, double *green_y, double *blue_x, double *blue_y, + /* Mastering display luminance in cd/m2 (nits). */ + double *mastering_display_maximum_luminance, + double *mastering_display_minimum_luminance)) + +PNG_FIXED_EXPORT(257, png_uint_32, png_get_mDCV_fixed, + (png_const_structrp png_ptr, png_const_inforp info_ptr, + png_fixed_point *int_white_x, png_fixed_point *int_white_y, + png_fixed_point *int_red_x, png_fixed_point *int_red_y, + png_fixed_point *int_green_x, png_fixed_point *int_green_y, + png_fixed_point *int_blue_x, png_fixed_point *int_blue_y, + /* Mastering display luminance in cd/m2 (nits) multiplied (scaled) by + * 10,000. + */ + png_uint_32p mastering_display_maximum_luminance_scaled_by_10000, + png_uint_32p mastering_display_minimum_luminance_scaled_by_10000)) +#endif + +#ifdef PNG_mDCV_SUPPORTED +PNG_FP_EXPORT(258, void, png_set_mDCV, (png_const_structrp png_ptr, + png_inforp info_ptr, + /* The chromaticities of the mastering display. As cHRM, but independent of + * the encoding endpoints in cHRM, or cICP, or iCCP. + */ + double white_x, double white_y, double red_x, double red_y, double green_x, + double green_y, double blue_x, double blue_y, + /* Mastering display luminance in cd/m2 (nits). */ + double mastering_display_maximum_luminance, + double mastering_display_minimum_luminance)) + +PNG_FIXED_EXPORT(259, void, png_set_mDCV_fixed, (png_const_structrp png_ptr, + png_inforp info_ptr, + /* The admissible range of these values is not the full range of a PNG + * fixed point value. Negative values cannot be encoded and the maximum + * value is about 1.3 */ + png_fixed_point int_white_x, png_fixed_point int_white_y, + png_fixed_point int_red_x, png_fixed_point int_red_y, + png_fixed_point int_green_x, png_fixed_point int_green_y, + png_fixed_point int_blue_x, png_fixed_point int_blue_y, + /* These are PNG unsigned 4 byte values: 31-bit unsigned values. The MSB + * must be zero. + */ + png_uint_32 mastering_display_maximum_luminance_scaled_by_10000, + png_uint_32 mastering_display_minimum_luminance_scaled_by_10000)) +#endif + +#ifdef PNG_oFFs_SUPPORTED +PNG_EXPORT(145, png_uint_32, png_get_oFFs, (png_const_structrp png_ptr, + png_const_inforp info_ptr, png_int_32 *offset_x, png_int_32 *offset_y, + int *unit_type)); +#endif + +#ifdef PNG_oFFs_SUPPORTED +PNG_EXPORT(146, void, png_set_oFFs, (png_const_structrp png_ptr, + png_inforp info_ptr, png_int_32 offset_x, png_int_32 offset_y, + int unit_type)); +#endif + +#ifdef PNG_pCAL_SUPPORTED +PNG_EXPORT(147, png_uint_32, png_get_pCAL, (png_const_structrp png_ptr, + png_inforp info_ptr, png_charp *purpose, png_int_32 *X0, + png_int_32 *X1, int *type, int *nparams, png_charp *units, + png_charpp *params)); +#endif + +#ifdef PNG_pCAL_SUPPORTED +PNG_EXPORT(148, void, png_set_pCAL, (png_const_structrp png_ptr, + png_inforp info_ptr, png_const_charp purpose, png_int_32 X0, png_int_32 X1, + int type, int nparams, png_const_charp units, png_charpp params)); +#endif + +#ifdef PNG_pHYs_SUPPORTED +PNG_EXPORT(149, png_uint_32, png_get_pHYs, (png_const_structrp png_ptr, + png_const_inforp info_ptr, png_uint_32 *res_x, png_uint_32 *res_y, + int *unit_type)); +#endif + +#ifdef PNG_pHYs_SUPPORTED +PNG_EXPORT(150, void, png_set_pHYs, (png_const_structrp png_ptr, + png_inforp info_ptr, png_uint_32 res_x, png_uint_32 res_y, int unit_type)); +#endif + +PNG_EXPORT(151, png_uint_32, png_get_PLTE, (png_const_structrp png_ptr, + png_inforp info_ptr, png_colorp *palette, int *num_palette)); + +PNG_EXPORT(152, void, png_set_PLTE, (png_structrp png_ptr, + png_inforp info_ptr, png_const_colorp palette, int num_palette)); + +#ifdef PNG_sBIT_SUPPORTED +PNG_EXPORT(153, png_uint_32, png_get_sBIT, (png_const_structrp png_ptr, + png_inforp info_ptr, png_color_8p *sig_bit)); +#endif + +#ifdef PNG_sBIT_SUPPORTED +PNG_EXPORT(154, void, png_set_sBIT, (png_const_structrp png_ptr, + png_inforp info_ptr, png_const_color_8p sig_bit)); +#endif + +#ifdef PNG_sRGB_SUPPORTED +PNG_EXPORT(155, png_uint_32, png_get_sRGB, (png_const_structrp png_ptr, + png_const_inforp info_ptr, int *file_srgb_intent)); +#endif + +#ifdef PNG_sRGB_SUPPORTED +PNG_EXPORT(156, void, png_set_sRGB, (png_const_structrp png_ptr, + png_inforp info_ptr, int srgb_intent)); +PNG_EXPORT(157, void, png_set_sRGB_gAMA_and_cHRM, (png_const_structrp png_ptr, + png_inforp info_ptr, int srgb_intent)); +#endif + +#ifdef PNG_iCCP_SUPPORTED +PNG_EXPORT(158, png_uint_32, png_get_iCCP, (png_const_structrp png_ptr, + png_inforp info_ptr, png_charpp name, int *compression_type, + png_bytepp profile, png_uint_32 *proflen)); +#endif + +#ifdef PNG_iCCP_SUPPORTED +PNG_EXPORT(159, void, png_set_iCCP, (png_const_structrp png_ptr, + png_inforp info_ptr, png_const_charp name, int compression_type, + png_const_bytep profile, png_uint_32 proflen)); +#endif + +#ifdef PNG_sPLT_SUPPORTED +PNG_EXPORT(160, int, png_get_sPLT, (png_const_structrp png_ptr, + png_inforp info_ptr, png_sPLT_tpp entries)); +#endif + +#ifdef PNG_sPLT_SUPPORTED +PNG_EXPORT(161, void, png_set_sPLT, (png_const_structrp png_ptr, + png_inforp info_ptr, png_const_sPLT_tp entries, int nentries)); +#endif + +#ifdef PNG_TEXT_SUPPORTED +/* png_get_text also returns the number of text chunks in *num_text */ +PNG_EXPORT(162, int, png_get_text, (png_const_structrp png_ptr, + png_inforp info_ptr, png_textp *text_ptr, int *num_text)); +#endif + +/* Note while png_set_text() will accept a structure whose text, + * language, and translated keywords are NULL pointers, the structure + * returned by png_get_text will always contain regular + * zero-terminated C strings. They might be empty strings but + * they will never be NULL pointers. + */ + +#ifdef PNG_TEXT_SUPPORTED +PNG_EXPORT(163, void, png_set_text, (png_const_structrp png_ptr, + png_inforp info_ptr, png_const_textp text_ptr, int num_text)); +#endif + +#ifdef PNG_tIME_SUPPORTED +PNG_EXPORT(164, png_uint_32, png_get_tIME, (png_const_structrp png_ptr, + png_inforp info_ptr, png_timep *mod_time)); +#endif + +#ifdef PNG_tIME_SUPPORTED +PNG_EXPORT(165, void, png_set_tIME, (png_const_structrp png_ptr, + png_inforp info_ptr, png_const_timep mod_time)); +#endif + +#ifdef PNG_tRNS_SUPPORTED +PNG_EXPORT(166, png_uint_32, png_get_tRNS, (png_const_structrp png_ptr, + png_inforp info_ptr, png_bytep *trans_alpha, int *num_trans, + png_color_16p *trans_color)); +#endif + +#ifdef PNG_tRNS_SUPPORTED +PNG_EXPORT(167, void, png_set_tRNS, (png_structrp png_ptr, + png_inforp info_ptr, png_const_bytep trans_alpha, int num_trans, + png_const_color_16p trans_color)); +#endif + +#ifdef PNG_sCAL_SUPPORTED +PNG_FP_EXPORT(168, png_uint_32, png_get_sCAL, (png_const_structrp png_ptr, + png_const_inforp info_ptr, int *unit, double *width, double *height)) +#if defined(PNG_FLOATING_ARITHMETIC_SUPPORTED) || \ + defined(PNG_FLOATING_POINT_SUPPORTED) +/* NOTE: this API is currently implemented using floating point arithmetic, + * consequently it can only be used on systems with floating point support. + * In any case the range of values supported by png_fixed_point is small and it + * is highly recommended that png_get_sCAL_s be used instead. + */ +PNG_FIXED_EXPORT(214, png_uint_32, png_get_sCAL_fixed, + (png_const_structrp png_ptr, png_const_inforp info_ptr, int *unit, + png_fixed_point *width, png_fixed_point *height)) +#endif +PNG_EXPORT(169, png_uint_32, png_get_sCAL_s, + (png_const_structrp png_ptr, png_const_inforp info_ptr, int *unit, + png_charpp swidth, png_charpp sheight)); + +PNG_FP_EXPORT(170, void, png_set_sCAL, (png_const_structrp png_ptr, + png_inforp info_ptr, int unit, double width, double height)) +PNG_FIXED_EXPORT(213, void, png_set_sCAL_fixed, (png_const_structrp png_ptr, + png_inforp info_ptr, int unit, png_fixed_point width, + png_fixed_point height)) +PNG_EXPORT(171, void, png_set_sCAL_s, (png_const_structrp png_ptr, + png_inforp info_ptr, int unit, + png_const_charp swidth, png_const_charp sheight)); +#endif /* sCAL */ + +#ifdef PNG_SET_UNKNOWN_CHUNKS_SUPPORTED +/* Provide the default handling for all unknown chunks or, optionally, for + * specific unknown chunks. + * + * NOTE: prior to 1.6.0 the handling specified for particular chunks on read was + * ignored and the default was used, the per-chunk setting only had an effect on + * write. If you wish to have chunk-specific handling on read in code that must + * work on earlier versions you must use a user chunk callback to specify the + * desired handling (keep or discard.) + * + * The 'keep' parameter is a PNG_HANDLE_CHUNK_ value as listed below. The + * parameter is interpreted as follows: + * + * READ: + * PNG_HANDLE_CHUNK_AS_DEFAULT: + * Known chunks: do normal libpng processing, do not keep the chunk (but + * see the comments below about PNG_HANDLE_AS_UNKNOWN_SUPPORTED) + * Unknown chunks: for a specific chunk use the global default, when used + * as the default discard the chunk data. + * PNG_HANDLE_CHUNK_NEVER: + * Discard the chunk data. + * PNG_HANDLE_CHUNK_IF_SAFE: + * Keep the chunk data if the chunk is not critical else raise a chunk + * error. + * PNG_HANDLE_CHUNK_ALWAYS: + * Keep the chunk data. + * + * If the chunk data is saved it can be retrieved using png_get_unknown_chunks, + * below. Notice that specifying "AS_DEFAULT" as a global default is equivalent + * to specifying "NEVER", however when "AS_DEFAULT" is used for specific chunks + * it simply resets the behavior to the libpng default. + * + * INTERACTION WITH USER CHUNK CALLBACKS: + * The per-chunk handling is always used when there is a png_user_chunk_ptr + * callback and the callback returns 0; the chunk is then always stored *unless* + * it is critical and the per-chunk setting is other than ALWAYS. Notice that + * the global default is *not* used in this case. (In effect the per-chunk + * value is incremented to at least IF_SAFE.) + * + * IMPORTANT NOTE: this behavior will change in libpng 1.7 - the global and + * per-chunk defaults will be honored. If you want to preserve the current + * behavior when your callback returns 0 you must set PNG_HANDLE_CHUNK_IF_SAFE + * as the default - if you don't do this libpng 1.6 will issue a warning. + * + * If you want unhandled unknown chunks to be discarded in libpng 1.6 and + * earlier simply return '1' (handled). + * + * PNG_HANDLE_AS_UNKNOWN_SUPPORTED: + * If this is *not* set known chunks will always be handled by libpng and + * will never be stored in the unknown chunk list. Known chunks listed to + * png_set_keep_unknown_chunks will have no effect. If it is set then known + * chunks listed with a keep other than AS_DEFAULT will *never* be processed + * by libpng, in addition critical chunks must either be processed by the + * callback or saved. + * + * The IHDR and IEND chunks must not be listed. Because this turns off the + * default handling for chunks that would otherwise be recognized the + * behavior of libpng transformations may well become incorrect! + * + * WRITE: + * When writing chunks the options only apply to the chunks specified by + * png_set_unknown_chunks (below), libpng will *always* write known chunks + * required by png_set_ calls and will always write the core critical chunks + * (as required for PLTE). + * + * Each chunk in the png_set_unknown_chunks list is looked up in the + * png_set_keep_unknown_chunks list to find the keep setting, this is then + * interpreted as follows: + * + * PNG_HANDLE_CHUNK_AS_DEFAULT: + * Write safe-to-copy chunks and write other chunks if the global + * default is set to _ALWAYS, otherwise don't write this chunk. + * PNG_HANDLE_CHUNK_NEVER: + * Do not write the chunk. + * PNG_HANDLE_CHUNK_IF_SAFE: + * Write the chunk if it is safe-to-copy, otherwise do not write it. + * PNG_HANDLE_CHUNK_ALWAYS: + * Write the chunk. + * + * Note that the default behavior is effectively the opposite of the read case - + * in read unknown chunks are not stored by default, in write they are written + * by default. Also the behavior of PNG_HANDLE_CHUNK_IF_SAFE is very different + * - on write the safe-to-copy bit is checked, on read the critical bit is + * checked and on read if the chunk is critical an error will be raised. + * + * num_chunks: + * =========== + * If num_chunks is positive, then the "keep" parameter specifies the manner + * for handling only those chunks appearing in the chunk_list array, + * otherwise the chunk list array is ignored. + * + * If num_chunks is 0 the "keep" parameter specifies the default behavior for + * unknown chunks, as described above. + * + * If num_chunks is negative, then the "keep" parameter specifies the manner + * for handling all unknown chunks plus all chunks recognized by libpng + * except for the IHDR, PLTE, tRNS, IDAT, and IEND chunks (which continue to + * be processed by libpng. + */ +#ifdef PNG_HANDLE_AS_UNKNOWN_SUPPORTED +PNG_EXPORT(172, void, png_set_keep_unknown_chunks, (png_structrp png_ptr, + int keep, png_const_bytep chunk_list, int num_chunks)); +#endif /* HANDLE_AS_UNKNOWN */ + +/* The "keep" PNG_HANDLE_CHUNK_ parameter for the specified chunk is returned; + * the result is therefore true (non-zero) if special handling is required, + * false for the default handling. + */ +PNG_EXPORT(173, int, png_handle_as_unknown, (png_const_structrp png_ptr, + png_const_bytep chunk_name)); +#endif /* SET_UNKNOWN_CHUNKS */ + +#ifdef PNG_STORE_UNKNOWN_CHUNKS_SUPPORTED +PNG_EXPORT(174, void, png_set_unknown_chunks, (png_const_structrp png_ptr, + png_inforp info_ptr, png_const_unknown_chunkp unknowns, + int num_unknowns)); + /* NOTE: prior to 1.6.0 this routine set the 'location' field of the added + * unknowns to the location currently stored in the png_struct. This is + * invariably the wrong value on write. To fix this call the following API + * for each chunk in the list with the correct location. If you know your + * code won't be compiled on earlier versions you can rely on + * png_set_unknown_chunks(write-ptr, png_get_unknown_chunks(read-ptr)) doing + * the correct thing. + */ + +PNG_EXPORT(175, void, png_set_unknown_chunk_location, + (png_const_structrp png_ptr, png_inforp info_ptr, int chunk, int location)); + +PNG_EXPORT(176, int, png_get_unknown_chunks, (png_const_structrp png_ptr, + png_inforp info_ptr, png_unknown_chunkpp entries)); +#endif + +/* Png_free_data() will turn off the "valid" flag for anything it frees. + * If you need to turn it off for a chunk that your application has freed, + * you can use png_set_invalid(png_ptr, info_ptr, PNG_INFO_CHNK); + */ +PNG_EXPORT(177, void, png_set_invalid, (png_const_structrp png_ptr, + png_inforp info_ptr, int mask)); + +#ifdef PNG_INFO_IMAGE_SUPPORTED +/* The "params" pointer is currently not used and is for future expansion. */ +#ifdef PNG_SEQUENTIAL_READ_SUPPORTED +PNG_EXPORT(178, void, png_read_png, (png_structrp png_ptr, png_inforp info_ptr, + int transforms, png_voidp params)); +#endif +#ifdef PNG_WRITE_SUPPORTED +PNG_EXPORT(179, void, png_write_png, (png_structrp png_ptr, png_inforp info_ptr, + int transforms, png_voidp params)); +#endif +#endif + +PNG_EXPORT(180, png_const_charp, png_get_copyright, + (png_const_structrp png_ptr)); +PNG_EXPORT(181, png_const_charp, png_get_header_ver, + (png_const_structrp png_ptr)); +PNG_EXPORT(182, png_const_charp, png_get_header_version, + (png_const_structrp png_ptr)); +PNG_EXPORT(183, png_const_charp, png_get_libpng_ver, + (png_const_structrp png_ptr)); + +#ifdef PNG_MNG_FEATURES_SUPPORTED +PNG_EXPORT(184, png_uint_32, png_permit_mng_features, (png_structrp png_ptr, + png_uint_32 mng_features_permitted)); +#endif + +/* For use in png_set_keep_unknown, added to version 1.2.6 */ +#define PNG_HANDLE_CHUNK_AS_DEFAULT 0 +#define PNG_HANDLE_CHUNK_NEVER 1 +#define PNG_HANDLE_CHUNK_IF_SAFE 2 +#define PNG_HANDLE_CHUNK_ALWAYS 3 +#define PNG_HANDLE_CHUNK_LAST 4 + +/* Strip the prepended error numbers ("#nnn ") from error and warning + * messages before passing them to the error or warning handler. + */ +#ifdef PNG_ERROR_NUMBERS_SUPPORTED +PNG_EXPORT(185, void, png_set_strip_error_numbers, (png_structrp png_ptr, + png_uint_32 strip_mode)); +#endif + +/* Added in libpng-1.2.6 */ +#ifdef PNG_SET_USER_LIMITS_SUPPORTED +PNG_EXPORT(186, void, png_set_user_limits, (png_structrp png_ptr, + png_uint_32 user_width_max, png_uint_32 user_height_max)); +PNG_EXPORT(187, png_uint_32, png_get_user_width_max, + (png_const_structrp png_ptr)); +PNG_EXPORT(188, png_uint_32, png_get_user_height_max, + (png_const_structrp png_ptr)); +/* Added in libpng-1.4.0 */ +PNG_EXPORT(189, void, png_set_chunk_cache_max, (png_structrp png_ptr, + png_uint_32 user_chunk_cache_max)); +PNG_EXPORT(190, png_uint_32, png_get_chunk_cache_max, + (png_const_structrp png_ptr)); +/* Added in libpng-1.4.1 */ +PNG_EXPORT(191, void, png_set_chunk_malloc_max, (png_structrp png_ptr, + png_alloc_size_t user_chunk_cache_max)); +PNG_EXPORT(192, png_alloc_size_t, png_get_chunk_malloc_max, + (png_const_structrp png_ptr)); +#endif + +#if defined(PNG_INCH_CONVERSIONS_SUPPORTED) +PNG_EXPORT(193, png_uint_32, png_get_pixels_per_inch, + (png_const_structrp png_ptr, png_const_inforp info_ptr)); + +PNG_EXPORT(194, png_uint_32, png_get_x_pixels_per_inch, + (png_const_structrp png_ptr, png_const_inforp info_ptr)); + +PNG_EXPORT(195, png_uint_32, png_get_y_pixels_per_inch, + (png_const_structrp png_ptr, png_const_inforp info_ptr)); + +PNG_FP_EXPORT(196, float, png_get_x_offset_inches, + (png_const_structrp png_ptr, png_const_inforp info_ptr)) +#ifdef PNG_FIXED_POINT_SUPPORTED /* otherwise not implemented. */ +PNG_FIXED_EXPORT(211, png_fixed_point, png_get_x_offset_inches_fixed, + (png_const_structrp png_ptr, png_const_inforp info_ptr)) +#endif + +PNG_FP_EXPORT(197, float, png_get_y_offset_inches, (png_const_structrp png_ptr, + png_const_inforp info_ptr)) +#ifdef PNG_FIXED_POINT_SUPPORTED /* otherwise not implemented. */ +PNG_FIXED_EXPORT(212, png_fixed_point, png_get_y_offset_inches_fixed, + (png_const_structrp png_ptr, png_const_inforp info_ptr)) +#endif + +# ifdef PNG_pHYs_SUPPORTED +PNG_EXPORT(198, png_uint_32, png_get_pHYs_dpi, (png_const_structrp png_ptr, + png_const_inforp info_ptr, png_uint_32 *res_x, png_uint_32 *res_y, + int *unit_type)); +# endif /* pHYs */ +#endif /* INCH_CONVERSIONS */ + +/* Added in libpng-1.4.0 */ +#ifdef PNG_IO_STATE_SUPPORTED +PNG_EXPORT(199, png_uint_32, png_get_io_state, (png_const_structrp png_ptr)); + +/* Removed from libpng 1.6; use png_get_io_chunk_type. */ +PNG_REMOVED(200, png_const_bytep, png_get_io_chunk_name, (png_structrp png_ptr), + PNG_DEPRECATED) + +PNG_EXPORT(216, png_uint_32, png_get_io_chunk_type, + (png_const_structrp png_ptr)); + +/* The flags returned by png_get_io_state() are the following: */ +# define PNG_IO_NONE 0x0000 /* no I/O at this moment */ +# define PNG_IO_READING 0x0001 /* currently reading */ +# define PNG_IO_WRITING 0x0002 /* currently writing */ +# define PNG_IO_SIGNATURE 0x0010 /* currently at the file signature */ +# define PNG_IO_CHUNK_HDR 0x0020 /* currently at the chunk header */ +# define PNG_IO_CHUNK_DATA 0x0040 /* currently at the chunk data */ +# define PNG_IO_CHUNK_CRC 0x0080 /* currently at the chunk crc */ +# define PNG_IO_MASK_OP 0x000f /* current operation: reading/writing */ +# define PNG_IO_MASK_LOC 0x00f0 /* current location: sig/hdr/data/crc */ +#endif /* IO_STATE */ + +/* Interlace support. The following macros are always defined so that if + * libpng interlace handling is turned off the macros may be used to handle + * interlaced images within the application. + */ +#define PNG_INTERLACE_ADAM7_PASSES 7 + +/* Two macros to return the first row and first column of the original, + * full, image which appears in a given pass. 'pass' is in the range 0 + * to 6 and the result is in the range 0 to 7. + */ +#define PNG_PASS_START_ROW(pass) (((1&~(pass))<<(3-((pass)>>1)))&7) +#define PNG_PASS_START_COL(pass) (((1& (pass))<<(3-(((pass)+1)>>1)))&7) + +/* A macro to return the offset between pixels in the output row for a pair of + * pixels in the input - effectively the inverse of the 'COL_SHIFT' macro that + * follows. Note that ROW_OFFSET is the offset from one row to the next whereas + * COL_OFFSET is from one column to the next, within a row. + */ +#define PNG_PASS_ROW_OFFSET(pass) ((pass)>2?(8>>(((pass)-1)>>1)):8) +#define PNG_PASS_COL_OFFSET(pass) (1<<((7-(pass))>>1)) + +/* Two macros to help evaluate the number of rows or columns in each + * pass. This is expressed as a shift - effectively log2 of the number or + * rows or columns in each 8x8 tile of the original image. + */ +#define PNG_PASS_ROW_SHIFT(pass) ((pass)>2?(8-(pass))>>1:3) +#define PNG_PASS_COL_SHIFT(pass) ((pass)>1?(7-(pass))>>1:3) + +/* Hence two macros to determine the number of rows or columns in a given + * pass of an image given its height or width. In fact these macros may + * return non-zero even though the sub-image is empty, because the other + * dimension may be empty for a small image. + */ +#define PNG_PASS_ROWS(height, pass) (((height)+(((1<>PNG_PASS_ROW_SHIFT(pass)) +#define PNG_PASS_COLS(width, pass) (((width)+(((1<>PNG_PASS_COL_SHIFT(pass)) + +/* For the reader row callbacks (both progressive and sequential) it is + * necessary to find the row in the output image given a row in an interlaced + * image, so two more macros: + */ +#define PNG_ROW_FROM_PASS_ROW(y_in, pass) \ + (((y_in)<>(((7-(off))-(pass))<<2)) & 0xF) | \ + ((0x01145AF0>>(((7-(off))-(pass))<<2)) & 0xF0)) + +#define PNG_ROW_IN_INTERLACE_PASS(y, pass) \ + ((PNG_PASS_MASK(pass,0) >> ((y)&7)) & 1) +#define PNG_COL_IN_INTERLACE_PASS(x, pass) \ + ((PNG_PASS_MASK(pass,1) >> ((x)&7)) & 1) + +#ifdef PNG_READ_COMPOSITE_NODIV_SUPPORTED +/* With these routines we avoid an integer divide, which will be slower on + * most machines. However, it does take more operations than the corresponding + * divide method, so it may be slower on a few RISC systems. There are two + * shifts (by 8 or 16 bits) and an addition, versus a single integer divide. + * + * Note that the rounding factors are NOT supposed to be the same! 128 and + * 32768 are correct for the NODIV code; 127 and 32767 are correct for the + * standard method. + * + * [Optimized code by Greg Roelofs and Mark Adler...blame us for bugs. :-) ] + */ + + /* fg and bg should be in `gamma 1.0' space; alpha is the opacity */ + +# define png_composite(composite, fg, alpha, bg) \ + { \ + png_uint_16 temp = (png_uint_16)((png_uint_16)(fg) \ + * (png_uint_16)(alpha) \ + + (png_uint_16)(bg)*(png_uint_16)(255 \ + - (png_uint_16)(alpha)) + 128); \ + (composite) = (png_byte)(((temp + (temp >> 8)) >> 8) & 0xff); \ + } + +# define png_composite_16(composite, fg, alpha, bg) \ + { \ + png_uint_32 temp = (png_uint_32)((png_uint_32)(fg) \ + * (png_uint_32)(alpha) \ + + (png_uint_32)(bg)*(65535 \ + - (png_uint_32)(alpha)) + 32768); \ + (composite) = (png_uint_16)(0xffff & ((temp + (temp >> 16)) >> 16)); \ + } + +#else /* Standard method using integer division */ + +# define png_composite(composite, fg, alpha, bg) \ + (composite) = \ + (png_byte)(0xff & (((png_uint_16)(fg) * (png_uint_16)(alpha) + \ + (png_uint_16)(bg) * (png_uint_16)(255 - (png_uint_16)(alpha)) + \ + 127) / 255)) + +# define png_composite_16(composite, fg, alpha, bg) \ + (composite) = \ + (png_uint_16)(0xffff & (((png_uint_32)(fg) * (png_uint_32)(alpha) + \ + (png_uint_32)(bg)*(png_uint_32)(65535 - (png_uint_32)(alpha)) + \ + 32767) / 65535)) +#endif /* READ_COMPOSITE_NODIV */ + +#ifdef PNG_READ_INT_FUNCTIONS_SUPPORTED +PNG_EXPORT(201, png_uint_32, png_get_uint_32, (png_const_bytep buf)); +PNG_EXPORT(202, png_uint_16, png_get_uint_16, (png_const_bytep buf)); +PNG_EXPORT(203, png_int_32, png_get_int_32, (png_const_bytep buf)); +#endif + +PNG_EXPORT(204, png_uint_32, png_get_uint_31, (png_const_structrp png_ptr, + png_const_bytep buf)); +/* No png_get_int_16 -- may be added if there's a real need for it. */ + +/* Place a 32-bit number into a buffer in PNG byte order (big-endian). */ +#ifdef PNG_WRITE_INT_FUNCTIONS_SUPPORTED +PNG_EXPORT(205, void, png_save_uint_32, (png_bytep buf, png_uint_32 i)); +#endif +#ifdef PNG_SAVE_INT_32_SUPPORTED +PNG_EXPORT(206, void, png_save_int_32, (png_bytep buf, png_int_32 i)); +#endif + +/* Place a 16-bit number into a buffer in PNG byte order. + * The parameter is declared unsigned int, not png_uint_16, + * just to avoid potential problems on pre-ANSI C compilers. + */ +#ifdef PNG_WRITE_INT_FUNCTIONS_SUPPORTED +PNG_EXPORT(207, void, png_save_uint_16, (png_bytep buf, unsigned int i)); +/* No png_save_int_16 -- may be added if there's a real need for it. */ +#endif + +#ifdef PNG_USE_READ_MACROS +/* Inline macros to do direct reads of bytes from the input buffer. + * The png_get_int_32() routine assumes we are using two's complement + * format for negative values, which is almost certainly true. + */ +# define PNG_get_uint_32(buf) \ + (((png_uint_32)(*(buf)) << 24) + \ + ((png_uint_32)(*((buf) + 1)) << 16) + \ + ((png_uint_32)(*((buf) + 2)) << 8) + \ + ((png_uint_32)(*((buf) + 3)))) + + /* From libpng-1.4.0 until 1.4.4, the png_get_uint_16 macro (but not the + * function) incorrectly returned a value of type png_uint_32. + */ +# define PNG_get_uint_16(buf) \ + ((png_uint_16) \ + (((unsigned int)(*(buf)) << 8) + \ + ((unsigned int)(*((buf) + 1))))) + +# define PNG_get_int_32(buf) \ + ((png_int_32)((*(buf) & 0x80) \ + ? -((png_int_32)(((png_get_uint_32(buf)^0xffffffffU)+1U)&0x7fffffffU)) \ + : (png_int_32)png_get_uint_32(buf))) + +/* If PNG_PREFIX is defined the same thing as below happens in pnglibconf.h, + * but defining a macro name prefixed with PNG_PREFIX. + */ +# ifndef PNG_PREFIX +# define png_get_uint_32(buf) PNG_get_uint_32(buf) +# define png_get_uint_16(buf) PNG_get_uint_16(buf) +# define png_get_int_32(buf) PNG_get_int_32(buf) +# endif +#else +# ifdef PNG_PREFIX + /* No macros; revert to the (redefined) function */ +# define PNG_get_uint_32 (png_get_uint_32) +# define PNG_get_uint_16 (png_get_uint_16) +# define PNG_get_int_32 (png_get_int_32) +# endif +#endif + +#ifdef PNG_CHECK_FOR_INVALID_INDEX_SUPPORTED +PNG_EXPORT(242, void, png_set_check_for_invalid_index, + (png_structrp png_ptr, int allowed)); +# ifdef PNG_GET_PALETTE_MAX_SUPPORTED +PNG_EXPORT(243, int, png_get_palette_max, (png_const_structp png_ptr, + png_const_infop info_ptr)); +# endif +#endif /* CHECK_FOR_INVALID_INDEX */ + +/******************************************************************************* + * Section 5: SIMPLIFIED API + ******************************************************************************* + * + * Please read the documentation in libpng-manual.txt (TODO: write said + * documentation) if you don't understand what follows. + * + * The simplified API hides the details of both libpng and the PNG file format + * itself. It allows PNG files to be read into a very limited number of + * in-memory bitmap formats or to be written from the same formats. If these + * formats do not accommodate your needs then you can, and should, use the more + * sophisticated APIs above - these support a wide variety of in-memory formats + * and a wide variety of sophisticated transformations to those formats as well + * as a wide variety of APIs to manipulate ancillary information. + * + * To read a PNG file using the simplified API: + * + * 1) Declare a 'png_image' structure (see below) on the stack, set the + * version field to PNG_IMAGE_VERSION and the 'opaque' pointer to NULL + * (this is REQUIRED, your program may crash if you don't do it.) + * 2) Call the appropriate png_image_begin_read... function. + * 3) Set the png_image 'format' member to the required sample format. + * 4) Allocate a buffer for the image and, if required, the color-map. + * 5) Call png_image_finish_read to read the image and, if required, the + * color-map into your buffers. + * + * There are no restrictions on the format of the PNG input itself; all valid + * color types, bit depths, and interlace methods are acceptable, and the + * input image is transformed as necessary to the requested in-memory format + * during the png_image_finish_read() step. The only caveat is that if you + * request a color-mapped image from a PNG that is full-color or makes + * complex use of an alpha channel the transformation is extremely lossy and the + * result may look terrible. + * + * To write a PNG file using the simplified API: + * + * 1) Declare a 'png_image' structure on the stack and memset() it to all zero. + * 2) Initialize the members of the structure that describe the image, setting + * the 'format' member to the format of the image samples. + * 3) Call the appropriate png_image_write... function with a pointer to the + * image and, if necessary, the color-map to write the PNG data. + * + * png_image is a structure that describes the in-memory format of an image + * when it is being read or defines the in-memory format of an image that you + * need to write: + */ +#if defined(PNG_SIMPLIFIED_READ_SUPPORTED) || \ + defined(PNG_SIMPLIFIED_WRITE_SUPPORTED) + +#define PNG_IMAGE_VERSION 1 + +typedef struct png_control *png_controlp; +typedef struct +{ + png_controlp opaque; /* Initialize to NULL, free with png_image_free */ + png_uint_32 version; /* Set to PNG_IMAGE_VERSION */ + png_uint_32 width; /* Image width in pixels (columns) */ + png_uint_32 height; /* Image height in pixels (rows) */ + png_uint_32 format; /* Image format as defined below */ + png_uint_32 flags; /* A bit mask containing informational flags */ + png_uint_32 colormap_entries; + /* Number of entries in the color-map */ + + /* In the event of an error or warning the following field will be set to a + * non-zero value and the 'message' field will contain a '\0' terminated + * string with the libpng error or warning message. If both warnings and + * an error were encountered, only the error is recorded. If there + * are multiple warnings, only the first one is recorded. + * + * The upper 30 bits of this value are reserved, the low two bits contain + * a value as follows: + */ +# define PNG_IMAGE_WARNING 1 +# define PNG_IMAGE_ERROR 2 + /* + * The result is a two-bit code such that a value more than 1 indicates + * a failure in the API just called: + * + * 0 - no warning or error + * 1 - warning + * 2 - error + * 3 - error preceded by warning + */ +# define PNG_IMAGE_FAILED(png_cntrl) ((((png_cntrl).warning_or_error)&0x03)>1) + + png_uint_32 warning_or_error; + + char message[64]; +} png_image, *png_imagep; + +/* The samples of the image have one to four channels whose components have + * original values in the range 0 to 1.0: + * + * 1: A single gray or luminance channel (G). + * 2: A gray/luminance channel and an alpha channel (GA). + * 3: Three red, green, blue color channels (RGB). + * 4: Three color channels and an alpha channel (RGBA). + * + * The components are encoded in one of two ways: + * + * a) As a small integer, value 0..255, contained in a single byte. For the + * alpha channel the original value is simply value/255. For the color or + * luminance channels the value is encoded according to the sRGB specification + * and matches the 8-bit format expected by typical display devices. + * + * The color/gray channels are not scaled (pre-multiplied) by the alpha + * channel and are suitable for passing to color management software. + * + * b) As a value in the range 0..65535, contained in a 2-byte integer. All + * channels can be converted to the original value by dividing by 65535; all + * channels are linear. Color channels use the RGB encoding (RGB end-points) of + * the sRGB specification. This encoding is identified by the + * PNG_FORMAT_FLAG_LINEAR flag below. + * + * When the simplified API needs to convert between sRGB and linear colorspaces, + * the actual sRGB transfer curve defined in the sRGB specification (see the + * article at ) is used, not the gamma=1/2.2 + * approximation used elsewhere in libpng. + * + * When an alpha channel is present it is expected to denote pixel coverage + * of the color or luminance channels and is returned as an associated alpha + * channel: the color/gray channels are scaled (pre-multiplied) by the alpha + * value. + * + * The samples are either contained directly in the image data, between 1 and 8 + * bytes per pixel according to the encoding, or are held in a color-map indexed + * by bytes in the image data. In the case of a color-map the color-map entries + * are individual samples, encoded as above, and the image data has one byte per + * pixel to select the relevant sample from the color-map. + */ + +/* PNG_FORMAT_* + * + * #defines to be used in png_image::format. Each #define identifies a + * particular layout of sample data and, if present, alpha values. There are + * separate defines for each of the two component encodings. + * + * A format is built up using single bit flag values. All combinations are + * valid. Formats can be built up from the flag values or you can use one of + * the predefined values below. When testing formats always use the FORMAT_FLAG + * macros to test for individual features - future versions of the library may + * add new flags. + * + * When reading or writing color-mapped images the format should be set to the + * format of the entries in the color-map then png_image_{read,write}_colormap + * called to read or write the color-map and set the format correctly for the + * image data. Do not set the PNG_FORMAT_FLAG_COLORMAP bit directly! + * + * NOTE: libpng can be built with particular features disabled. If you see + * compiler errors because the definition of one of the following flags has been + * compiled out it is because libpng does not have the required support. It is + * possible, however, for the libpng configuration to enable the format on just + * read or just write; in that case you may see an error at run time. You can + * guard against this by checking for the definition of the appropriate + * "_SUPPORTED" macro, one of: + * + * PNG_SIMPLIFIED_{READ,WRITE}_{BGR,AFIRST}_SUPPORTED + */ +#define PNG_FORMAT_FLAG_ALPHA 0x01U /* format with an alpha channel */ +#define PNG_FORMAT_FLAG_COLOR 0x02U /* color format: otherwise grayscale */ +#define PNG_FORMAT_FLAG_LINEAR 0x04U /* 2-byte channels else 1-byte */ +#define PNG_FORMAT_FLAG_COLORMAP 0x08U /* image data is color-mapped */ + +#ifdef PNG_FORMAT_BGR_SUPPORTED +# define PNG_FORMAT_FLAG_BGR 0x10U /* BGR colors, else order is RGB */ +#endif + +#ifdef PNG_FORMAT_AFIRST_SUPPORTED +# define PNG_FORMAT_FLAG_AFIRST 0x20U /* alpha channel comes first */ +#endif + +#define PNG_FORMAT_FLAG_ASSOCIATED_ALPHA 0x40U /* alpha channel is associated */ + +/* Commonly used formats have predefined macros. + * + * First the single byte (sRGB) formats: + */ +#define PNG_FORMAT_GRAY 0 +#define PNG_FORMAT_GA PNG_FORMAT_FLAG_ALPHA +#define PNG_FORMAT_AG (PNG_FORMAT_GA|PNG_FORMAT_FLAG_AFIRST) +#define PNG_FORMAT_RGB PNG_FORMAT_FLAG_COLOR +#define PNG_FORMAT_BGR (PNG_FORMAT_FLAG_COLOR|PNG_FORMAT_FLAG_BGR) +#define PNG_FORMAT_RGBA (PNG_FORMAT_RGB|PNG_FORMAT_FLAG_ALPHA) +#define PNG_FORMAT_ARGB (PNG_FORMAT_RGBA|PNG_FORMAT_FLAG_AFIRST) +#define PNG_FORMAT_BGRA (PNG_FORMAT_BGR|PNG_FORMAT_FLAG_ALPHA) +#define PNG_FORMAT_ABGR (PNG_FORMAT_BGRA|PNG_FORMAT_FLAG_AFIRST) + +/* Then the linear 2-byte formats. When naming these "Y" is used to + * indicate a luminance (gray) channel. + */ +#define PNG_FORMAT_LINEAR_Y PNG_FORMAT_FLAG_LINEAR +#define PNG_FORMAT_LINEAR_Y_ALPHA (PNG_FORMAT_FLAG_LINEAR|PNG_FORMAT_FLAG_ALPHA) +#define PNG_FORMAT_LINEAR_RGB (PNG_FORMAT_FLAG_LINEAR|PNG_FORMAT_FLAG_COLOR) +#define PNG_FORMAT_LINEAR_RGB_ALPHA \ + (PNG_FORMAT_FLAG_LINEAR|PNG_FORMAT_FLAG_COLOR|PNG_FORMAT_FLAG_ALPHA) + +/* With color-mapped formats the image data is one byte for each pixel, the byte + * is an index into the color-map which is formatted as above. To obtain a + * color-mapped format it is sufficient just to add the PNG_FOMAT_FLAG_COLORMAP + * to one of the above definitions, or you can use one of the definitions below. + */ +#define PNG_FORMAT_RGB_COLORMAP (PNG_FORMAT_RGB|PNG_FORMAT_FLAG_COLORMAP) +#define PNG_FORMAT_BGR_COLORMAP (PNG_FORMAT_BGR|PNG_FORMAT_FLAG_COLORMAP) +#define PNG_FORMAT_RGBA_COLORMAP (PNG_FORMAT_RGBA|PNG_FORMAT_FLAG_COLORMAP) +#define PNG_FORMAT_ARGB_COLORMAP (PNG_FORMAT_ARGB|PNG_FORMAT_FLAG_COLORMAP) +#define PNG_FORMAT_BGRA_COLORMAP (PNG_FORMAT_BGRA|PNG_FORMAT_FLAG_COLORMAP) +#define PNG_FORMAT_ABGR_COLORMAP (PNG_FORMAT_ABGR|PNG_FORMAT_FLAG_COLORMAP) + +/* PNG_IMAGE macros + * + * These are convenience macros to derive information from a png_image + * structure. The PNG_IMAGE_SAMPLE_ macros return values appropriate to the + * actual image sample values - either the entries in the color-map or the + * pixels in the image. The PNG_IMAGE_PIXEL_ macros return corresponding values + * for the pixels and will always return 1 for color-mapped formats. The + * remaining macros return information about the rows in the image and the + * complete image. + * + * NOTE: All the macros that take a png_image::format parameter are compile time + * constants if the format parameter is, itself, a constant. Therefore these + * macros can be used in array declarations and case labels where required. + * Similarly the macros are also pre-processor constants (sizeof is not used) so + * they can be used in #if tests. + * + * First the information about the samples. + */ +#define PNG_IMAGE_SAMPLE_CHANNELS(fmt)\ + (((fmt)&(PNG_FORMAT_FLAG_COLOR|PNG_FORMAT_FLAG_ALPHA))+1) + /* Return the total number of channels in a given format: 1..4 */ + +#define PNG_IMAGE_SAMPLE_COMPONENT_SIZE(fmt)\ + ((((fmt) & PNG_FORMAT_FLAG_LINEAR) >> 2)+1) + /* Return the size in bytes of a single component of a pixel or color-map + * entry (as appropriate) in the image: 1 or 2. + */ + +#define PNG_IMAGE_SAMPLE_SIZE(fmt)\ + (PNG_IMAGE_SAMPLE_CHANNELS(fmt) * PNG_IMAGE_SAMPLE_COMPONENT_SIZE(fmt)) + /* This is the size of the sample data for one sample. If the image is + * color-mapped it is the size of one color-map entry (and image pixels are + * one byte in size), otherwise it is the size of one image pixel. + */ + +#define PNG_IMAGE_MAXIMUM_COLORMAP_COMPONENTS(fmt)\ + (PNG_IMAGE_SAMPLE_CHANNELS(fmt) * 256) + /* The maximum size of the color-map required by the format expressed in a + * count of components. This can be used to compile-time allocate a + * color-map: + * + * png_uint_16 colormap[PNG_IMAGE_MAXIMUM_COLORMAP_COMPONENTS(linear_fmt)]; + * + * png_byte colormap[PNG_IMAGE_MAXIMUM_COLORMAP_COMPONENTS(sRGB_fmt)]; + * + * Alternatively use the PNG_IMAGE_COLORMAP_SIZE macro below to use the + * information from one of the png_image_begin_read_ APIs and dynamically + * allocate the required memory. + */ + +/* Corresponding information about the pixels */ +#define PNG_IMAGE_PIXEL_(test,fmt)\ + (((fmt)&PNG_FORMAT_FLAG_COLORMAP)?1:test(fmt)) + +#define PNG_IMAGE_PIXEL_CHANNELS(fmt)\ + PNG_IMAGE_PIXEL_(PNG_IMAGE_SAMPLE_CHANNELS,fmt) + /* The number of separate channels (components) in a pixel; 1 for a + * color-mapped image. + */ + +#define PNG_IMAGE_PIXEL_COMPONENT_SIZE(fmt)\ + PNG_IMAGE_PIXEL_(PNG_IMAGE_SAMPLE_COMPONENT_SIZE,fmt) + /* The size, in bytes, of each component in a pixel; 1 for a color-mapped + * image. + */ + +#define PNG_IMAGE_PIXEL_SIZE(fmt) PNG_IMAGE_PIXEL_(PNG_IMAGE_SAMPLE_SIZE,fmt) + /* The size, in bytes, of a complete pixel; 1 for a color-mapped image. */ + +/* Information about the whole row, or whole image */ +#define PNG_IMAGE_ROW_STRIDE(image)\ + (PNG_IMAGE_PIXEL_CHANNELS((image).format) * (image).width) + /* Return the total number of components in a single row of the image; this + * is the minimum 'row stride', the minimum count of components between each + * row. For a color-mapped image this is the minimum number of bytes in a + * row. + * + * WARNING: this macro overflows for some images with more than one component + * and very large image widths. libpng will refuse to process an image where + * this macro would overflow. + */ + +#define PNG_IMAGE_BUFFER_SIZE(image, row_stride)\ + (PNG_IMAGE_PIXEL_COMPONENT_SIZE((image).format)*(image).height*(row_stride)) + /* Return the size, in bytes, of an image buffer given a png_image and a row + * stride - the number of components to leave space for in each row. + * + * WARNING: this macro overflows a 32-bit integer for some large PNG images, + * libpng will refuse to process an image where such an overflow would occur. + */ + +#define PNG_IMAGE_SIZE(image)\ + PNG_IMAGE_BUFFER_SIZE(image, PNG_IMAGE_ROW_STRIDE(image)) + /* Return the size, in bytes, of the image in memory given just a png_image; + * the row stride is the minimum stride required for the image. + */ + +#define PNG_IMAGE_COLORMAP_SIZE(image)\ + (PNG_IMAGE_SAMPLE_SIZE((image).format) * (image).colormap_entries) + /* Return the size, in bytes, of the color-map of this image. If the image + * format is not a color-map format this will return a size sufficient for + * 256 entries in the given format; check PNG_FORMAT_FLAG_COLORMAP if + * you don't want to allocate a color-map in this case. + */ + +/* PNG_IMAGE_FLAG_* + * + * Flags containing additional information about the image are held in the + * 'flags' field of png_image. + */ +#define PNG_IMAGE_FLAG_COLORSPACE_NOT_sRGB 0x01 + /* This indicates that the RGB values of the in-memory bitmap do not + * correspond to the red, green and blue end-points defined by sRGB. + */ + +#define PNG_IMAGE_FLAG_FAST 0x02 + /* On write emphasise speed over compression; the resultant PNG file will be + * larger but will be produced significantly faster, particular for large + * images. Do not use this option for images which will be distributed, only + * used it when producing intermediate files that will be read back in + * repeatedly. For a typical 24-bit image the option will double the read + * speed at the cost of increasing the image size by 25%, however for many + * more compressible images the PNG file can be 10 times larger with only a + * slight speed gain. + */ + +#define PNG_IMAGE_FLAG_16BIT_sRGB 0x04 + /* On read if the image is a 16-bit per component image and there is no gAMA + * or sRGB chunk assume that the components are sRGB encoded. Notice that + * images output by the simplified API always have gamma information; setting + * this flag only affects the interpretation of 16-bit images from an + * external source. It is recommended that the application expose this flag + * to the user; the user can normally easily recognize the difference between + * linear and sRGB encoding. This flag has no effect on write - the data + * passed to the write APIs must have the correct encoding (as defined + * above.) + * + * If the flag is not set (the default) input 16-bit per component data is + * assumed to be linear. + * + * NOTE: the flag can only be set after the png_image_begin_read_ call, + * because that call initializes the 'flags' field. + */ + +#ifdef PNG_SIMPLIFIED_READ_SUPPORTED +/* READ APIs + * --------- + * + * The png_image passed to the read APIs must have been initialized by setting + * the png_controlp field 'opaque' to NULL (or, safer, memset the whole thing.) + */ +#ifdef PNG_STDIO_SUPPORTED +PNG_EXPORT(234, int, png_image_begin_read_from_file, (png_imagep image, + const char *file_name)); + /* The named file is opened for read and the image header is filled in + * from the PNG header in the file. + */ + +PNG_EXPORT(235, int, png_image_begin_read_from_stdio, (png_imagep image, + FILE* file)); + /* The PNG header is read from the stdio FILE object. */ +#endif /* STDIO */ + +PNG_EXPORT(236, int, png_image_begin_read_from_memory, (png_imagep image, + png_const_voidp memory, size_t size)); + /* The PNG header is read from the given memory buffer. */ + +PNG_EXPORT(237, int, png_image_finish_read, (png_imagep image, + png_const_colorp background, void *buffer, png_int_32 row_stride, + void *colormap)); + /* Finish reading the image into the supplied buffer and clean up the + * png_image structure. + * + * row_stride is the step, in byte or 2-byte units as appropriate, + * between adjacent rows. A positive stride indicates that the top-most row + * is first in the buffer - the normal top-down arrangement. A negative + * stride indicates that the bottom-most row is first in the buffer. + * + * background need only be supplied if an alpha channel must be removed from + * a png_byte format and the removal is to be done by compositing on a solid + * color; otherwise it may be NULL and any composition will be done directly + * onto the buffer. The value is an sRGB color to use for the background, + * for grayscale output the green channel is used. + * + * background must be supplied when an alpha channel must be removed from a + * single byte color-mapped output format, in other words if: + * + * 1) The original format from png_image_begin_read_from_* had + * PNG_FORMAT_FLAG_ALPHA set. + * 2) The format set by the application does not. + * 3) The format set by the application has PNG_FORMAT_FLAG_COLORMAP set and + * PNG_FORMAT_FLAG_LINEAR *not* set. + * + * For linear output removing the alpha channel is always done by compositing + * on black and background is ignored. + * + * colormap must be supplied when PNG_FORMAT_FLAG_COLORMAP is set. It must + * be at least the size (in bytes) returned by PNG_IMAGE_COLORMAP_SIZE. + * image->colormap_entries will be updated to the actual number of entries + * written to the colormap; this may be less than the original value. + */ + +PNG_EXPORT(238, void, png_image_free, (png_imagep image)); + /* Free any data allocated by libpng in image->opaque, setting the pointer to + * NULL. May be called at any time after the structure is initialized. + */ +#endif /* SIMPLIFIED_READ */ + +#ifdef PNG_SIMPLIFIED_WRITE_SUPPORTED +/* WRITE APIS + * ---------- + * For write you must initialize a png_image structure to describe the image to + * be written. To do this use memset to set the whole structure to 0 then + * initialize fields describing your image. + * + * version: must be set to PNG_IMAGE_VERSION + * opaque: must be initialized to NULL + * width: image width in pixels + * height: image height in rows + * format: the format of the data (image and color-map) you wish to write + * flags: set to 0 unless one of the defined flags applies; set + * PNG_IMAGE_FLAG_COLORSPACE_NOT_sRGB for color format images where the RGB + * values do not correspond to the colors in sRGB. + * colormap_entries: set to the number of entries in the color-map (0 to 256) + */ +#ifdef PNG_SIMPLIFIED_WRITE_STDIO_SUPPORTED +PNG_EXPORT(239, int, png_image_write_to_file, (png_imagep image, + const char *file, int convert_to_8bit, const void *buffer, + png_int_32 row_stride, const void *colormap)); + /* Write the image to the named file. */ + +PNG_EXPORT(240, int, png_image_write_to_stdio, (png_imagep image, FILE *file, + int convert_to_8_bit, const void *buffer, png_int_32 row_stride, + const void *colormap)); + /* Write the image to the given (FILE*). */ +#endif /* SIMPLIFIED_WRITE_STDIO */ + +/* With all write APIs if image is in one of the linear formats with 16-bit + * data then setting convert_to_8_bit will cause the output to be an 8-bit PNG + * gamma encoded according to the sRGB specification, otherwise a 16-bit linear + * encoded PNG file is written. + * + * With color-mapped data formats the colormap parameter point to a color-map + * with at least image->colormap_entries encoded in the specified format. If + * the format is linear the written PNG color-map will be converted to sRGB + * regardless of the convert_to_8_bit flag. + * + * With all APIs row_stride is handled as in the read APIs - it is the spacing + * from one row to the next in component sized units (1 or 2 bytes) and if + * negative indicates a bottom-up row layout in the buffer. If row_stride is + * zero, libpng will calculate it for you from the image width and number of + * channels. + * + * Note that the write API does not support interlacing, sub-8-bit pixels or + * most ancillary chunks. If you need to write text chunks (e.g. for copyright + * notices) you need to use one of the other APIs. + */ + +PNG_EXPORT(245, int, png_image_write_to_memory, (png_imagep image, void *memory, + png_alloc_size_t * PNG_RESTRICT memory_bytes, int convert_to_8_bit, + const void *buffer, png_int_32 row_stride, const void *colormap)); + /* Write the image to the given memory buffer. The function both writes the + * whole PNG data stream to *memory and updates *memory_bytes with the count + * of bytes written. + * + * 'memory' may be NULL. In this case *memory_bytes is not read however on + * success the number of bytes which would have been written will still be + * stored in *memory_bytes. On failure *memory_bytes will contain 0. + * + * If 'memory' is not NULL it must point to memory[*memory_bytes] of + * writeable memory. + * + * If the function returns success memory[*memory_bytes] (if 'memory' is not + * NULL) contains the written PNG data. *memory_bytes will always be less + * than or equal to the original value. + * + * If the function returns false and *memory_bytes was not changed an error + * occurred during write. If *memory_bytes was changed, or is not 0 if + * 'memory' was NULL, the write would have succeeded but for the memory + * buffer being too small. *memory_bytes contains the required number of + * bytes and will be bigger that the original value. + */ + +#define png_image_write_get_memory_size(image, size, convert_to_8_bit, buffer,\ + row_stride, colormap)\ + png_image_write_to_memory(&(image), 0, &(size), convert_to_8_bit, buffer,\ + row_stride, colormap) + /* Return the amount of memory in 'size' required to compress this image. + * The png_image structure 'image' must be filled in as in the above + * function and must not be changed before the actual write call, the buffer + * and all other parameters must also be identical to that in the final + * write call. The 'size' variable need not be initialized. + * + * NOTE: the macro returns true/false, if false is returned 'size' will be + * set to zero and the write failed and probably will fail if tried again. + */ + +/* You can pre-allocate the buffer by making sure it is of sufficient size + * regardless of the amount of compression achieved. The buffer size will + * always be bigger than the original image and it will never be filled. The + * following macros are provided to assist in allocating the buffer. + */ +#define PNG_IMAGE_DATA_SIZE(image) (PNG_IMAGE_SIZE(image)+(image).height) + /* The number of uncompressed bytes in the PNG byte encoding of the image; + * uncompressing the PNG IDAT data will give this number of bytes. + * + * NOTE: while PNG_IMAGE_SIZE cannot overflow for an image in memory this + * macro can because of the extra bytes used in the PNG byte encoding. You + * need to avoid this macro if your image size approaches 2^30 in width or + * height. The same goes for the remainder of these macros; they all produce + * bigger numbers than the actual in-memory image size. + */ +#ifndef PNG_ZLIB_MAX_SIZE +# define PNG_ZLIB_MAX_SIZE(b) ((b)+(((b)+7U)>>3)+(((b)+63U)>>6)+11U) + /* An upper bound on the number of compressed bytes given 'b' uncompressed + * bytes. This is based on deflateBounds() in zlib; different + * implementations of zlib compression may conceivably produce more data so + * if your zlib implementation is not zlib itself redefine this macro + * appropriately. + */ +#endif + +#define PNG_IMAGE_COMPRESSED_SIZE_MAX(image)\ + PNG_ZLIB_MAX_SIZE((png_alloc_size_t)PNG_IMAGE_DATA_SIZE(image)) + /* An upper bound on the size of the data in the PNG IDAT chunks. */ + +#define PNG_IMAGE_PNG_SIZE_MAX_(image, image_size)\ + ((8U/*sig*/+25U/*IHDR*/+16U/*gAMA*/+44U/*cHRM*/+12U/*IEND*/+\ + (((image).format&PNG_FORMAT_FLAG_COLORMAP)?/*colormap: PLTE, tRNS*/\ + 12U+3U*(image).colormap_entries/*PLTE data*/+\ + (((image).format&PNG_FORMAT_FLAG_ALPHA)?\ + 12U/*tRNS*/+(image).colormap_entries:0U):0U)+\ + 12U)+(12U*((image_size)/PNG_ZBUF_SIZE))/*IDAT*/+(image_size)) + /* A helper for the following macro; if your compiler cannot handle the + * following macro use this one with the result of + * PNG_IMAGE_COMPRESSED_SIZE_MAX(image) as the second argument (most + * compilers should handle this just fine.) + */ + +#define PNG_IMAGE_PNG_SIZE_MAX(image)\ + PNG_IMAGE_PNG_SIZE_MAX_(image, PNG_IMAGE_COMPRESSED_SIZE_MAX(image)) + /* An upper bound on the total length of the PNG data stream for 'image'. + * The result is of type png_alloc_size_t, on 32-bit systems this may + * overflow even though PNG_IMAGE_DATA_SIZE does not overflow; the write will + * run out of buffer space but return a corrected size which should work. + */ +#endif /* SIMPLIFIED_WRITE */ +/******************************************************************************* + * END OF SIMPLIFIED API + ******************************************************************************/ +#endif /* SIMPLIFIED_{READ|WRITE} */ + +/******************************************************************************* + * Section 6: IMPLEMENTATION OPTIONS + ******************************************************************************* + * + * Support for arbitrary implementation-specific optimizations. The API allows + * particular options to be turned on or off. 'Option' is the number of the + * option and 'onoff' is 0 (off) or non-0 (on). The value returned is given + * by the PNG_OPTION_ defines below. + * + * HARDWARE: normally hardware capabilities, such as the Intel SSE instructions, + * are detected at run time, however sometimes it may be impossible + * to do this in user mode, in which case it is necessary to discover + * the capabilities in an OS specific way. Such capabilities are + * listed here when libpng has support for them and must be turned + * ON by the application if present. + * + * SOFTWARE: sometimes software optimizations actually result in performance + * decrease on some architectures or systems, or with some sets of + * PNG images. 'Software' options allow such optimizations to be + * selected at run time. + */ +#ifdef PNG_SET_OPTION_SUPPORTED +#ifdef PNG_ARM_NEON_API_SUPPORTED +# define PNG_ARM_NEON 0 /* HARDWARE: ARM Neon SIMD instructions supported */ +#endif +#define PNG_MAXIMUM_INFLATE_WINDOW 2 /* SOFTWARE: force maximum window */ +#define PNG_SKIP_sRGB_CHECK_PROFILE 4 /* SOFTWARE: Check ICC profile for sRGB */ +#ifdef PNG_MIPS_MSA_API_SUPPORTED +# define PNG_MIPS_MSA 6 /* HARDWARE: MIPS Msa SIMD instructions supported */ +#endif +#ifdef PNG_DISABLE_ADLER32_CHECK_SUPPORTED +# define PNG_IGNORE_ADLER32 8 /* SOFTWARE: disable Adler32 check on IDAT */ +#endif +#ifdef PNG_POWERPC_VSX_API_SUPPORTED +# define PNG_POWERPC_VSX 10 /* HARDWARE: PowerPC VSX SIMD instructions + * supported */ +#endif +#ifdef PNG_MIPS_MMI_API_SUPPORTED +# define PNG_MIPS_MMI 12 /* HARDWARE: MIPS MMI SIMD instructions supported */ +#endif + +#define PNG_OPTION_NEXT 14 /* Next option - numbers must be even */ + +/* Return values: NOTE: there are four values and 'off' is *not* zero */ +#define PNG_OPTION_UNSET 0 /* Unset - defaults to off */ +#define PNG_OPTION_INVALID 1 /* Option number out of range */ +#define PNG_OPTION_OFF 2 +#define PNG_OPTION_ON 3 + +PNG_EXPORT(244, int, png_set_option, (png_structrp png_ptr, int option, + int onoff)); +#endif /* SET_OPTION */ + +/******************************************************************************* + * END OF HARDWARE AND SOFTWARE OPTIONS + ******************************************************************************/ + +/* Maintainer: Put new public prototypes here ^, in libpng.3, in project + * defs, and in scripts/symbols.def. + */ + +/* The last ordinal number (this is the *last* one already used; the next + * one to use is one more than this.) + */ +#ifdef PNG_EXPORT_LAST_ORDINAL + PNG_EXPORT_LAST_ORDINAL(259); +#endif + +#ifdef __cplusplus +} +#endif + +#endif /* PNG_VERSION_INFO_ONLY */ +/* Do not put anything past this line */ +#endif /* PNG_H */ diff --git a/dependencies/winx64/include/libpng16/pngconf.h b/dependencies/winx64/include/libpng16/pngconf.h new file mode 100644 index 0000000..42fa973 --- /dev/null +++ b/dependencies/winx64/include/libpng16/pngconf.h @@ -0,0 +1,622 @@ +/* pngconf.h - machine-configurable file for libpng + * + * libpng version 1.6.47 + * + * Copyright (c) 2018-2025 Cosmin Truta + * Copyright (c) 1998-2002,2004,2006-2016,2018 Glenn Randers-Pehrson + * Copyright (c) 1996-1997 Andreas Dilger + * Copyright (c) 1995-1996 Guy Eric Schalnat, Group 42, Inc. + * + * This code is released under the libpng license. + * For conditions of distribution and use, see the disclaimer + * and license in png.h + * + * Any machine specific code is near the front of this file, so if you + * are configuring libpng for a machine, you may want to read the section + * starting here down to where it starts to typedef png_color, png_text, + * and png_info. + */ + +#ifndef PNGCONF_H +#define PNGCONF_H + +#ifndef PNG_BUILDING_SYMBOL_TABLE /* else includes may cause problems */ + +/* From libpng 1.6.0 libpng requires an ANSI X3.159-1989 ("ISOC90") compliant C + * compiler for correct compilation. The following header files are required by + * the standard. If your compiler doesn't provide these header files, or they + * do not match the standard, you will need to provide/improve them. + */ +#include +#include + +/* Library header files. These header files are all defined by ISOC90; libpng + * expects conformant implementations, however, an ISOC90 conformant system need + * not provide these header files if the functionality cannot be implemented. + * In this case it will be necessary to disable the relevant parts of libpng in + * the build of pnglibconf.h. + * + * Prior to 1.6.0 string.h was included here; the API changes in 1.6.0 to not + * include this unnecessary header file. + */ + +#ifdef PNG_STDIO_SUPPORTED + /* Required for the definition of FILE: */ +# include +#endif + +#ifdef PNG_SETJMP_SUPPORTED + /* Required for the definition of jmp_buf and the declaration of longjmp: */ +# include +#endif + +#ifdef PNG_CONVERT_tIME_SUPPORTED + /* Required for struct tm: */ +# include +#endif + +#endif /* PNG_BUILDING_SYMBOL_TABLE */ + +/* Prior to 1.6.0, it was possible to turn off 'const' in declarations, + * using PNG_NO_CONST. This is no longer supported. + */ +#define PNG_CONST const /* backward compatibility only */ + +/* This controls optimization of the reading of 16-bit and 32-bit + * values from PNG files. It can be set on a per-app-file basis: it + * just changes whether a macro is used when the function is called. + * The library builder sets the default; if read functions are not + * built into the library the macro implementation is forced on. + */ +#ifndef PNG_READ_INT_FUNCTIONS_SUPPORTED +# define PNG_USE_READ_MACROS +#endif +#if !defined(PNG_NO_USE_READ_MACROS) && !defined(PNG_USE_READ_MACROS) +# if PNG_DEFAULT_READ_MACROS +# define PNG_USE_READ_MACROS +# endif +#endif + +/* COMPILER SPECIFIC OPTIONS. + * + * These options are provided so that a variety of difficult compilers + * can be used. Some are fixed at build time (e.g. PNG_API_RULE + * below) but still have compiler specific implementations, others + * may be changed on a per-file basis when compiling against libpng. + */ + +/* The PNGARG macro was used in versions of libpng prior to 1.6.0 to protect + * against legacy (pre ISOC90) compilers that did not understand function + * prototypes. [Deprecated.] + */ +#ifndef PNGARG +# define PNGARG(arglist) arglist +#endif + +/* Function calling conventions. + * ============================= + * Normally it is not necessary to specify to the compiler how to call + * a function - it just does it - however on x86 systems derived from + * Microsoft and Borland C compilers ('IBM PC', 'DOS', 'Windows' systems + * and some others) there are multiple ways to call a function and the + * default can be changed on the compiler command line. For this reason + * libpng specifies the calling convention of every exported function and + * every function called via a user supplied function pointer. This is + * done in this file by defining the following macros: + * + * PNGAPI Calling convention for exported functions. + * PNGCBAPI Calling convention for user provided (callback) functions. + * PNGCAPI Calling convention used by the ANSI-C library (required + * for longjmp callbacks and sometimes used internally to + * specify the calling convention for zlib). + * + * These macros should never be overridden. If it is necessary to + * change calling convention in a private build this can be done + * by setting PNG_API_RULE (which defaults to 0) to one of the values + * below to select the correct 'API' variants. + * + * PNG_API_RULE=0 Use PNGCAPI - the 'C' calling convention - throughout. + * This is correct in every known environment. + * PNG_API_RULE=1 Use the operating system convention for PNGAPI and + * the 'C' calling convention (from PNGCAPI) for + * callbacks (PNGCBAPI). This is no longer required + * in any known environment - if it has to be used + * please post an explanation of the problem to the + * libpng mailing list. + * + * These cases only differ if the operating system does not use the C + * calling convention, at present this just means the above cases + * (x86 DOS/Windows systems) and, even then, this does not apply to + * Cygwin running on those systems. + * + * Note that the value must be defined in pnglibconf.h so that what + * the application uses to call the library matches the conventions + * set when building the library. + */ + +/* Symbol export + * ============= + * When building a shared library it is almost always necessary to tell + * the compiler which symbols to export. The png.h macro 'PNG_EXPORT' + * is used to mark the symbols. On some systems these symbols can be + * extracted at link time and need no special processing by the compiler, + * on other systems the symbols are flagged by the compiler and just + * the declaration requires a special tag applied (unfortunately) in a + * compiler dependent way. Some systems can do either. + * + * A small number of older systems also require a symbol from a DLL to + * be flagged to the program that calls it. This is a problem because + * we do not know in the header file included by application code that + * the symbol will come from a shared library, as opposed to a statically + * linked one. For this reason the application must tell us by setting + * the magic flag PNG_USE_DLL to turn on the special processing before + * it includes png.h. + * + * Four additional macros are used to make this happen: + * + * PNG_IMPEXP The magic (if any) to cause a symbol to be exported from + * the build or imported if PNG_USE_DLL is set - compiler + * and system specific. + * + * PNG_EXPORT_TYPE(type) A macro that pre or appends PNG_IMPEXP to + * 'type', compiler specific. + * + * PNG_DLL_EXPORT Set to the magic to use during a libpng build to + * make a symbol exported from the DLL. Not used in the + * public header files; see pngpriv.h for how it is used + * in the libpng build. + * + * PNG_DLL_IMPORT Set to the magic to force the libpng symbols to come + * from a DLL - used to define PNG_IMPEXP when + * PNG_USE_DLL is set. + */ + +/* System specific discovery. + * ========================== + * This code is used at build time to find PNG_IMPEXP, the API settings + * and PNG_EXPORT_TYPE(), it may also set a macro to indicate the DLL + * import processing is possible. On Windows systems it also sets + * compiler-specific macros to the values required to change the calling + * conventions of the various functions. + */ +#if defined(_WIN32) || defined(__WIN32__) || defined(__NT__) || \ + defined(__CYGWIN__) + /* Windows system (DOS doesn't support DLLs). Includes builds under Cygwin or + * MinGW on any architecture currently supported by Windows. Also includes + * Watcom builds but these need special treatment because they are not + * compatible with GCC or Visual C because of different calling conventions. + */ +# if PNG_API_RULE == 2 + /* If this line results in an error, either because __watcall is not + * understood or because of a redefine just below you cannot use *this* + * build of the library with the compiler you are using. *This* build was + * build using Watcom and applications must also be built using Watcom! + */ +# define PNGCAPI __watcall +# endif + +# if defined(__GNUC__) || (defined(_MSC_VER) && (_MSC_VER >= 800)) +# define PNGCAPI __cdecl +# if PNG_API_RULE == 1 + /* If this line results in an error __stdcall is not understood and + * PNG_API_RULE should not have been set to '1'. + */ +# define PNGAPI __stdcall +# endif +# else + /* An older compiler, or one not detected (erroneously) above, + * if necessary override on the command line to get the correct + * variants for the compiler. + */ +# ifndef PNGCAPI +# define PNGCAPI _cdecl +# endif +# if PNG_API_RULE == 1 && !defined(PNGAPI) +# define PNGAPI _stdcall +# endif +# endif /* compiler/api */ + + /* NOTE: PNGCBAPI always defaults to PNGCAPI. */ + +# if defined(PNGAPI) && !defined(PNG_USER_PRIVATEBUILD) +# error "PNG_USER_PRIVATEBUILD must be defined if PNGAPI is changed" +# endif + +# if (defined(_MSC_VER) && _MSC_VER < 800) ||\ + (defined(__BORLANDC__) && __BORLANDC__ < 0x500) + /* older Borland and MSC + * compilers used '__export' and required this to be after + * the type. + */ +# ifndef PNG_EXPORT_TYPE +# define PNG_EXPORT_TYPE(type) type PNG_IMPEXP +# endif +# define PNG_DLL_EXPORT __export +# else /* newer compiler */ +# define PNG_DLL_EXPORT __declspec(dllexport) +# ifndef PNG_DLL_IMPORT +# define PNG_DLL_IMPORT __declspec(dllimport) +# endif +# endif /* compiler */ + +#else /* !Windows */ +# if (defined(__IBMC__) || defined(__IBMCPP__)) && defined(__OS2__) +# define PNGAPI _System +# else /* !Windows/x86 && !OS/2 */ + /* Use the defaults, or define PNG*API on the command line (but + * this will have to be done for every compile!) + */ +# endif /* other system, !OS/2 */ +#endif /* !Windows/x86 */ + +/* Now do all the defaulting . */ +#ifndef PNGCAPI +# define PNGCAPI +#endif +#ifndef PNGCBAPI +# define PNGCBAPI PNGCAPI +#endif +#ifndef PNGAPI +# define PNGAPI PNGCAPI +#endif + +/* PNG_IMPEXP may be set on the compilation system command line or (if not set) + * then in an internal header file when building the library, otherwise (when + * using the library) it is set here. + */ +#ifndef PNG_IMPEXP +# if defined(PNG_USE_DLL) && defined(PNG_DLL_IMPORT) + /* This forces use of a DLL, disallowing static linking */ +# define PNG_IMPEXP PNG_DLL_IMPORT +# endif + +# ifndef PNG_IMPEXP +# define PNG_IMPEXP +# endif +#endif + +/* In 1.5.2 the definition of PNG_FUNCTION has been changed to always treat + * 'attributes' as a storage class - the attributes go at the start of the + * function definition, and attributes are always appended regardless of the + * compiler. This considerably simplifies these macros but may cause problems + * if any compilers both need function attributes and fail to handle them as + * a storage class (this is unlikely.) + */ +#ifndef PNG_FUNCTION +# define PNG_FUNCTION(type, name, args, attributes) attributes type name args +#endif + +#ifndef PNG_EXPORT_TYPE +# define PNG_EXPORT_TYPE(type) PNG_IMPEXP type +#endif + + /* The ordinal value is only relevant when preprocessing png.h for symbol + * table entries, so we discard it here. See the .dfn files in the + * scripts directory. + */ + +#ifndef PNG_EXPORTA +# define PNG_EXPORTA(ordinal, type, name, args, attributes) \ + PNG_FUNCTION(PNG_EXPORT_TYPE(type), (PNGAPI name), args, \ + PNG_LINKAGE_API attributes) +#endif + +/* ANSI-C (C90) does not permit a macro to be invoked with an empty argument, + * so make something non-empty to satisfy the requirement: + */ +#define PNG_EMPTY /*empty list*/ + +#define PNG_EXPORT(ordinal, type, name, args) \ + PNG_EXPORTA(ordinal, type, name, args, PNG_EMPTY) + +/* Use PNG_REMOVED to comment out a removed interface. */ +#ifndef PNG_REMOVED +# define PNG_REMOVED(ordinal, type, name, args, attributes) +#endif + +#ifndef PNG_CALLBACK +# define PNG_CALLBACK(type, name, args) type (PNGCBAPI name) args +#endif + +/* Support for compiler specific function attributes. These are used + * so that where compiler support is available incorrect use of API + * functions in png.h will generate compiler warnings. + * + * Added at libpng-1.2.41. + */ + +#ifndef PNG_NO_PEDANTIC_WARNINGS +# ifndef PNG_PEDANTIC_WARNINGS_SUPPORTED +# define PNG_PEDANTIC_WARNINGS_SUPPORTED +# endif +#endif + +#ifdef PNG_PEDANTIC_WARNINGS_SUPPORTED + /* Support for compiler specific function attributes. These are used + * so that where compiler support is available, incorrect use of API + * functions in png.h will generate compiler warnings. Added at libpng + * version 1.2.41. Disabling these removes the warnings but may also produce + * less efficient code. + */ +# if defined(__clang__) && defined(__has_attribute) + /* Clang defines both __clang__ and __GNUC__. Check __clang__ first. */ +# if !defined(PNG_USE_RESULT) && __has_attribute(__warn_unused_result__) +# define PNG_USE_RESULT __attribute__((__warn_unused_result__)) +# endif +# if !defined(PNG_NORETURN) && __has_attribute(__noreturn__) +# define PNG_NORETURN __attribute__((__noreturn__)) +# endif +# if !defined(PNG_ALLOCATED) && __has_attribute(__malloc__) +# define PNG_ALLOCATED __attribute__((__malloc__)) +# endif +# if !defined(PNG_DEPRECATED) && __has_attribute(__deprecated__) +# define PNG_DEPRECATED __attribute__((__deprecated__)) +# endif +# if !defined(PNG_PRIVATE) +# ifdef __has_extension +# if __has_extension(attribute_unavailable_with_message) +# define PNG_PRIVATE __attribute__((__unavailable__(\ + "This function is not exported by libpng."))) +# endif +# endif +# endif +# ifndef PNG_RESTRICT +# define PNG_RESTRICT __restrict +# endif + +# elif defined(__GNUC__) +# ifndef PNG_USE_RESULT +# define PNG_USE_RESULT __attribute__((__warn_unused_result__)) +# endif +# ifndef PNG_NORETURN +# define PNG_NORETURN __attribute__((__noreturn__)) +# endif +# if __GNUC__ >= 3 +# ifndef PNG_ALLOCATED +# define PNG_ALLOCATED __attribute__((__malloc__)) +# endif +# ifndef PNG_DEPRECATED +# define PNG_DEPRECATED __attribute__((__deprecated__)) +# endif +# ifndef PNG_PRIVATE +# if 0 /* Doesn't work so we use deprecated instead*/ +# define PNG_PRIVATE \ + __attribute__((warning("This function is not exported by libpng."))) +# else +# define PNG_PRIVATE \ + __attribute__((__deprecated__)) +# endif +# endif +# if ((__GNUC__ > 3) || !defined(__GNUC_MINOR__) || (__GNUC_MINOR__ >= 1)) +# ifndef PNG_RESTRICT +# define PNG_RESTRICT __restrict +# endif +# endif /* __GNUC__.__GNUC_MINOR__ > 3.0 */ +# endif /* __GNUC__ >= 3 */ + +# elif defined(_MSC_VER) && (_MSC_VER >= 1300) +# ifndef PNG_USE_RESULT +# define PNG_USE_RESULT /* not supported */ +# endif +# ifndef PNG_NORETURN +# define PNG_NORETURN __declspec(noreturn) +# endif +# ifndef PNG_ALLOCATED +# if (_MSC_VER >= 1400) +# define PNG_ALLOCATED __declspec(restrict) +# endif +# endif +# ifndef PNG_DEPRECATED +# define PNG_DEPRECATED __declspec(deprecated) +# endif +# ifndef PNG_PRIVATE +# define PNG_PRIVATE __declspec(deprecated) +# endif +# ifndef PNG_RESTRICT +# if (_MSC_VER >= 1400) +# define PNG_RESTRICT __restrict +# endif +# endif + +# elif defined(__WATCOMC__) +# ifndef PNG_RESTRICT +# define PNG_RESTRICT __restrict +# endif +# endif +#endif /* PNG_PEDANTIC_WARNINGS */ + +#ifndef PNG_DEPRECATED +# define PNG_DEPRECATED /* Use of this function is deprecated */ +#endif +#ifndef PNG_USE_RESULT +# define PNG_USE_RESULT /* The result of this function must be checked */ +#endif +#ifndef PNG_NORETURN +# define PNG_NORETURN /* This function does not return */ +#endif +#ifndef PNG_ALLOCATED +# define PNG_ALLOCATED /* The result of the function is new memory */ +#endif +#ifndef PNG_PRIVATE +# define PNG_PRIVATE /* This is a private libpng function */ +#endif +#ifndef PNG_RESTRICT +# define PNG_RESTRICT /* The C99 "restrict" feature */ +#endif + +#ifndef PNG_FP_EXPORT /* A floating point API. */ +# ifdef PNG_FLOATING_POINT_SUPPORTED +# define PNG_FP_EXPORT(ordinal, type, name, args)\ + PNG_EXPORT(ordinal, type, name, args); +# else /* No floating point APIs */ +# define PNG_FP_EXPORT(ordinal, type, name, args) +# endif +#endif +#ifndef PNG_FIXED_EXPORT /* A fixed point API. */ +# ifdef PNG_FIXED_POINT_SUPPORTED +# define PNG_FIXED_EXPORT(ordinal, type, name, args)\ + PNG_EXPORT(ordinal, type, name, args); +# else /* No fixed point APIs */ +# define PNG_FIXED_EXPORT(ordinal, type, name, args) +# endif +#endif + +#ifndef PNG_BUILDING_SYMBOL_TABLE +/* Some typedefs to get us started. These should be safe on most of the common + * platforms. + * + * png_uint_32 and png_int_32 may, currently, be larger than required to hold a + * 32-bit value however this is not normally advisable. + * + * png_uint_16 and png_int_16 should always be two bytes in size - this is + * verified at library build time. + * + * png_byte must always be one byte in size. + * + * The checks below use constants from limits.h, as defined by the ISOC90 + * standard. + */ +#if CHAR_BIT == 8 && UCHAR_MAX == 255 + typedef unsigned char png_byte; +#else +# error "libpng requires 8-bit bytes" +#endif + +#if INT_MIN == -32768 && INT_MAX == 32767 + typedef int png_int_16; +#elif SHRT_MIN == -32768 && SHRT_MAX == 32767 + typedef short png_int_16; +#else +# error "libpng requires a signed 16-bit type" +#endif + +#if UINT_MAX == 65535 + typedef unsigned int png_uint_16; +#elif USHRT_MAX == 65535 + typedef unsigned short png_uint_16; +#else +# error "libpng requires an unsigned 16-bit type" +#endif + +#if INT_MIN < -2147483646 && INT_MAX > 2147483646 + typedef int png_int_32; +#elif LONG_MIN < -2147483646 && LONG_MAX > 2147483646 + typedef long int png_int_32; +#else +# error "libpng requires a signed 32-bit (or more) type" +#endif + +#if UINT_MAX > 4294967294U + typedef unsigned int png_uint_32; +#elif ULONG_MAX > 4294967294U + typedef unsigned long int png_uint_32; +#else +# error "libpng requires an unsigned 32-bit (or more) type" +#endif + +/* Prior to 1.6.0, it was possible to disable the use of size_t and ptrdiff_t. + * From 1.6.0 onwards, an ISO C90 compiler, as well as a standard-compliant + * behavior of sizeof and ptrdiff_t are required. + * The legacy typedefs are provided here for backwards compatibility. + */ +typedef size_t png_size_t; +typedef ptrdiff_t png_ptrdiff_t; + +/* libpng needs to know the maximum value of 'size_t' and this controls the + * definition of png_alloc_size_t, below. This maximum value of size_t limits + * but does not control the maximum allocations the library makes - there is + * direct application control of this through png_set_user_limits(). + */ +#ifndef PNG_SMALL_SIZE_T + /* Compiler specific tests for systems where size_t is known to be less than + * 32 bits (some of these systems may no longer work because of the lack of + * 'far' support; see above.) + */ +# if (defined(__TURBOC__) && !defined(__FLAT__)) ||\ + (defined(_MSC_VER) && defined(MAXSEG_64K)) +# define PNG_SMALL_SIZE_T +# endif +#endif + +/* png_alloc_size_t is guaranteed to be no smaller than size_t, and no smaller + * than png_uint_32. Casts from size_t or png_uint_32 to png_alloc_size_t are + * not necessary; in fact, it is recommended not to use them at all, so that + * the compiler can complain when something turns out to be problematic. + * + * Casts in the other direction (from png_alloc_size_t to size_t or + * png_uint_32) should be explicitly applied; however, we do not expect to + * encounter practical situations that require such conversions. + * + * PNG_SMALL_SIZE_T must be defined if the maximum value of size_t is less than + * 4294967295 - i.e. less than the maximum value of png_uint_32. + */ +#ifdef PNG_SMALL_SIZE_T + typedef png_uint_32 png_alloc_size_t; +#else + typedef size_t png_alloc_size_t; +#endif + +/* Prior to 1.6.0 libpng offered limited support for Microsoft C compiler + * implementations of Intel CPU specific support of user-mode segmented address + * spaces, where 16-bit pointers address more than 65536 bytes of memory using + * separate 'segment' registers. The implementation requires two different + * types of pointer (only one of which includes the segment value.) + * + * If required this support is available in version 1.2 of libpng and may be + * available in versions through 1.5, although the correctness of the code has + * not been verified recently. + */ + +/* Typedef for floating-point numbers that are converted to fixed-point with a + * multiple of 100,000, e.g., gamma + */ +typedef png_int_32 png_fixed_point; + +/* Add typedefs for pointers */ +typedef void * png_voidp; +typedef const void * png_const_voidp; +typedef png_byte * png_bytep; +typedef const png_byte * png_const_bytep; +typedef png_uint_32 * png_uint_32p; +typedef const png_uint_32 * png_const_uint_32p; +typedef png_int_32 * png_int_32p; +typedef const png_int_32 * png_const_int_32p; +typedef png_uint_16 * png_uint_16p; +typedef const png_uint_16 * png_const_uint_16p; +typedef png_int_16 * png_int_16p; +typedef const png_int_16 * png_const_int_16p; +typedef char * png_charp; +typedef const char * png_const_charp; +typedef png_fixed_point * png_fixed_point_p; +typedef const png_fixed_point * png_const_fixed_point_p; +typedef size_t * png_size_tp; +typedef const size_t * png_const_size_tp; + +#ifdef PNG_STDIO_SUPPORTED +typedef FILE * png_FILE_p; +#endif + +#ifdef PNG_FLOATING_POINT_SUPPORTED +typedef double * png_doublep; +typedef const double * png_const_doublep; +#endif + +/* Pointers to pointers; i.e. arrays */ +typedef png_byte * * png_bytepp; +typedef png_uint_32 * * png_uint_32pp; +typedef png_int_32 * * png_int_32pp; +typedef png_uint_16 * * png_uint_16pp; +typedef png_int_16 * * png_int_16pp; +typedef const char * * png_const_charpp; +typedef char * * png_charpp; +typedef png_fixed_point * * png_fixed_point_pp; +#ifdef PNG_FLOATING_POINT_SUPPORTED +typedef double * * png_doublepp; +#endif + +/* Pointers to pointers to pointers; i.e., pointer to array */ +typedef char * * * png_charppp; + +#endif /* PNG_BUILDING_SYMBOL_TABLE */ + +#endif /* PNGCONF_H */ diff --git a/dependencies/winx64/include/libpng16/pnglibconf.h b/dependencies/winx64/include/libpng16/pnglibconf.h new file mode 100644 index 0000000..17245b4 --- /dev/null +++ b/dependencies/winx64/include/libpng16/pnglibconf.h @@ -0,0 +1,233 @@ +/* pnglibconf.h - library build configuration */ + +/* libpng version 1.6.47 */ + +/* Copyright (c) 2018-2025 Cosmin Truta */ +/* Copyright (c) 1998-2002,2004,2006-2018 Glenn Randers-Pehrson */ + +/* This code is released under the libpng license. */ +/* For conditions of distribution and use, see the disclaimer */ +/* and license in png.h */ + +/* pnglibconf.h */ +/* Machine generated file: DO NOT EDIT */ +/* Derived from: scripts/pnglibconf.dfa */ +#ifndef PNGLCONF_H +#define PNGLCONF_H +/* options */ +#define PNG_16BIT_SUPPORTED +#define PNG_ALIGNED_MEMORY_SUPPORTED +/*#undef PNG_ARM_NEON_API_SUPPORTED*/ +/*#undef PNG_ARM_NEON_CHECK_SUPPORTED*/ +#define PNG_BENIGN_ERRORS_SUPPORTED +#define PNG_BENIGN_READ_ERRORS_SUPPORTED +/*#undef PNG_BENIGN_WRITE_ERRORS_SUPPORTED*/ +#define PNG_BUILD_GRAYSCALE_PALETTE_SUPPORTED +#define PNG_CHECK_FOR_INVALID_INDEX_SUPPORTED +#define PNG_COLORSPACE_SUPPORTED +#define PNG_CONSOLE_IO_SUPPORTED +#define PNG_CONVERT_tIME_SUPPORTED +/*#undef PNG_DISABLE_ADLER32_CHECK_SUPPORTED*/ +#define PNG_EASY_ACCESS_SUPPORTED +/*#undef PNG_ERROR_NUMBERS_SUPPORTED*/ +#define PNG_ERROR_TEXT_SUPPORTED +#define PNG_FIXED_POINT_SUPPORTED +#define PNG_FLOATING_ARITHMETIC_SUPPORTED +#define PNG_FLOATING_POINT_SUPPORTED +#define PNG_FORMAT_AFIRST_SUPPORTED +#define PNG_FORMAT_BGR_SUPPORTED +#define PNG_GAMMA_SUPPORTED +#define PNG_GET_PALETTE_MAX_SUPPORTED +#define PNG_HANDLE_AS_UNKNOWN_SUPPORTED +#define PNG_INCH_CONVERSIONS_SUPPORTED +#define PNG_INFO_IMAGE_SUPPORTED +#define PNG_IO_STATE_SUPPORTED +/*#undef PNG_MIPS_MMI_API_SUPPORTED*/ +/*#undef PNG_MIPS_MMI_CHECK_SUPPORTED*/ +/*#undef PNG_MIPS_MSA_API_SUPPORTED*/ +/*#undef PNG_MIPS_MSA_CHECK_SUPPORTED*/ +#define PNG_MNG_FEATURES_SUPPORTED +#define PNG_POINTER_INDEXING_SUPPORTED +/*#undef PNG_POWERPC_VSX_API_SUPPORTED*/ +/*#undef PNG_POWERPC_VSX_CHECK_SUPPORTED*/ +#define PNG_PROGRESSIVE_READ_SUPPORTED +#define PNG_READ_16BIT_SUPPORTED +#define PNG_READ_ALPHA_MODE_SUPPORTED +#define PNG_READ_ANCILLARY_CHUNKS_SUPPORTED +#define PNG_READ_BACKGROUND_SUPPORTED +#define PNG_READ_BGR_SUPPORTED +#define PNG_READ_CHECK_FOR_INVALID_INDEX_SUPPORTED +#define PNG_READ_COMPOSITE_NODIV_SUPPORTED +#define PNG_READ_COMPRESSED_TEXT_SUPPORTED +#define PNG_READ_EXPAND_16_SUPPORTED +#define PNG_READ_EXPAND_SUPPORTED +#define PNG_READ_FILLER_SUPPORTED +#define PNG_READ_GAMMA_SUPPORTED +#define PNG_READ_GET_PALETTE_MAX_SUPPORTED +#define PNG_READ_GRAY_TO_RGB_SUPPORTED +#define PNG_READ_INTERLACING_SUPPORTED +#define PNG_READ_INT_FUNCTIONS_SUPPORTED +#define PNG_READ_INVERT_ALPHA_SUPPORTED +#define PNG_READ_INVERT_SUPPORTED +#define PNG_READ_OPT_PLTE_SUPPORTED +#define PNG_READ_PACKSWAP_SUPPORTED +#define PNG_READ_PACK_SUPPORTED +#define PNG_READ_QUANTIZE_SUPPORTED +#define PNG_READ_RGB_TO_GRAY_SUPPORTED +#define PNG_READ_SCALE_16_TO_8_SUPPORTED +#define PNG_READ_SHIFT_SUPPORTED +#define PNG_READ_STRIP_16_TO_8_SUPPORTED +#define PNG_READ_STRIP_ALPHA_SUPPORTED +#define PNG_READ_SUPPORTED +#define PNG_READ_SWAP_ALPHA_SUPPORTED +#define PNG_READ_SWAP_SUPPORTED +#define PNG_READ_TEXT_SUPPORTED +#define PNG_READ_TRANSFORMS_SUPPORTED +#define PNG_READ_UNKNOWN_CHUNKS_SUPPORTED +#define PNG_READ_USER_CHUNKS_SUPPORTED +#define PNG_READ_USER_TRANSFORM_SUPPORTED +#define PNG_READ_bKGD_SUPPORTED +#define PNG_READ_cHRM_SUPPORTED +#define PNG_READ_cICP_SUPPORTED +#define PNG_READ_cLLI_SUPPORTED +#define PNG_READ_eXIf_SUPPORTED +#define PNG_READ_gAMA_SUPPORTED +#define PNG_READ_hIST_SUPPORTED +#define PNG_READ_iCCP_SUPPORTED +#define PNG_READ_iTXt_SUPPORTED +#define PNG_READ_mDCV_SUPPORTED +#define PNG_READ_oFFs_SUPPORTED +#define PNG_READ_pCAL_SUPPORTED +#define PNG_READ_pHYs_SUPPORTED +#define PNG_READ_sBIT_SUPPORTED +#define PNG_READ_sCAL_SUPPORTED +#define PNG_READ_sPLT_SUPPORTED +#define PNG_READ_sRGB_SUPPORTED +#define PNG_READ_tEXt_SUPPORTED +#define PNG_READ_tIME_SUPPORTED +#define PNG_READ_tRNS_SUPPORTED +#define PNG_READ_zTXt_SUPPORTED +#define PNG_SAVE_INT_32_SUPPORTED +#define PNG_SAVE_UNKNOWN_CHUNKS_SUPPORTED +#define PNG_SEQUENTIAL_READ_SUPPORTED +#define PNG_SETJMP_SUPPORTED +#define PNG_SET_OPTION_SUPPORTED +#define PNG_SET_UNKNOWN_CHUNKS_SUPPORTED +#define PNG_SET_USER_LIMITS_SUPPORTED +#define PNG_SIMPLIFIED_READ_AFIRST_SUPPORTED +#define PNG_SIMPLIFIED_READ_BGR_SUPPORTED +#define PNG_SIMPLIFIED_READ_SUPPORTED +#define PNG_SIMPLIFIED_WRITE_AFIRST_SUPPORTED +#define PNG_SIMPLIFIED_WRITE_BGR_SUPPORTED +#define PNG_SIMPLIFIED_WRITE_STDIO_SUPPORTED +#define PNG_SIMPLIFIED_WRITE_SUPPORTED +#define PNG_STDIO_SUPPORTED +#define PNG_STORE_UNKNOWN_CHUNKS_SUPPORTED +#define PNG_TEXT_SUPPORTED +#define PNG_TIME_RFC1123_SUPPORTED +#define PNG_UNKNOWN_CHUNKS_SUPPORTED +#define PNG_USER_CHUNKS_SUPPORTED +#define PNG_USER_LIMITS_SUPPORTED +#define PNG_USER_MEM_SUPPORTED +#define PNG_USER_TRANSFORM_INFO_SUPPORTED +#define PNG_USER_TRANSFORM_PTR_SUPPORTED +#define PNG_WARNINGS_SUPPORTED +#define PNG_WRITE_16BIT_SUPPORTED +#define PNG_WRITE_ANCILLARY_CHUNKS_SUPPORTED +#define PNG_WRITE_BGR_SUPPORTED +#define PNG_WRITE_CHECK_FOR_INVALID_INDEX_SUPPORTED +#define PNG_WRITE_COMPRESSED_TEXT_SUPPORTED +#define PNG_WRITE_CUSTOMIZE_COMPRESSION_SUPPORTED +#define PNG_WRITE_CUSTOMIZE_ZTXT_COMPRESSION_SUPPORTED +#define PNG_WRITE_FILLER_SUPPORTED +#define PNG_WRITE_FILTER_SUPPORTED +#define PNG_WRITE_FLUSH_SUPPORTED +#define PNG_WRITE_GET_PALETTE_MAX_SUPPORTED +#define PNG_WRITE_INTERLACING_SUPPORTED +#define PNG_WRITE_INT_FUNCTIONS_SUPPORTED +#define PNG_WRITE_INVERT_ALPHA_SUPPORTED +#define PNG_WRITE_INVERT_SUPPORTED +#define PNG_WRITE_OPTIMIZE_CMF_SUPPORTED +#define PNG_WRITE_PACKSWAP_SUPPORTED +#define PNG_WRITE_PACK_SUPPORTED +#define PNG_WRITE_SHIFT_SUPPORTED +#define PNG_WRITE_SUPPORTED +#define PNG_WRITE_SWAP_ALPHA_SUPPORTED +#define PNG_WRITE_SWAP_SUPPORTED +#define PNG_WRITE_TEXT_SUPPORTED +#define PNG_WRITE_TRANSFORMS_SUPPORTED +#define PNG_WRITE_UNKNOWN_CHUNKS_SUPPORTED +#define PNG_WRITE_USER_TRANSFORM_SUPPORTED +#define PNG_WRITE_WEIGHTED_FILTER_SUPPORTED +#define PNG_WRITE_bKGD_SUPPORTED +#define PNG_WRITE_cHRM_SUPPORTED +#define PNG_WRITE_cICP_SUPPORTED +#define PNG_WRITE_cLLI_SUPPORTED +#define PNG_WRITE_eXIf_SUPPORTED +#define PNG_WRITE_gAMA_SUPPORTED +#define PNG_WRITE_hIST_SUPPORTED +#define PNG_WRITE_iCCP_SUPPORTED +#define PNG_WRITE_iTXt_SUPPORTED +#define PNG_WRITE_mDCV_SUPPORTED +#define PNG_WRITE_oFFs_SUPPORTED +#define PNG_WRITE_pCAL_SUPPORTED +#define PNG_WRITE_pHYs_SUPPORTED +#define PNG_WRITE_sBIT_SUPPORTED +#define PNG_WRITE_sCAL_SUPPORTED +#define PNG_WRITE_sPLT_SUPPORTED +#define PNG_WRITE_sRGB_SUPPORTED +#define PNG_WRITE_tEXt_SUPPORTED +#define PNG_WRITE_tIME_SUPPORTED +#define PNG_WRITE_tRNS_SUPPORTED +#define PNG_WRITE_zTXt_SUPPORTED +#define PNG_bKGD_SUPPORTED +#define PNG_cHRM_SUPPORTED +#define PNG_cICP_SUPPORTED +#define PNG_cLLI_SUPPORTED +#define PNG_eXIf_SUPPORTED +#define PNG_gAMA_SUPPORTED +#define PNG_hIST_SUPPORTED +#define PNG_iCCP_SUPPORTED +#define PNG_iTXt_SUPPORTED +#define PNG_mDCV_SUPPORTED +#define PNG_oFFs_SUPPORTED +#define PNG_pCAL_SUPPORTED +#define PNG_pHYs_SUPPORTED +#define PNG_sBIT_SUPPORTED +#define PNG_sCAL_SUPPORTED +#define PNG_sPLT_SUPPORTED +#define PNG_sRGB_SUPPORTED +#define PNG_tEXt_SUPPORTED +#define PNG_tIME_SUPPORTED +#define PNG_tRNS_SUPPORTED +#define PNG_zTXt_SUPPORTED +/* end of options */ +/* settings */ +#define PNG_API_RULE 0 +#define PNG_DEFAULT_READ_MACROS 1 +#define PNG_GAMMA_THRESHOLD_FIXED 5000 +#define PNG_IDAT_READ_SIZE PNG_ZBUF_SIZE +#define PNG_INFLATE_BUF_SIZE 1024 +#define PNG_LINKAGE_API extern +#define PNG_LINKAGE_CALLBACK extern +#define PNG_LINKAGE_DATA extern +#define PNG_LINKAGE_FUNCTION extern +#define PNG_MAX_GAMMA_8 11 +#define PNG_QUANTIZE_BLUE_BITS 5 +#define PNG_QUANTIZE_GREEN_BITS 5 +#define PNG_QUANTIZE_RED_BITS 5 +#define PNG_TEXT_Z_DEFAULT_COMPRESSION (-1) +#define PNG_TEXT_Z_DEFAULT_STRATEGY 0 +#define PNG_USER_CHUNK_CACHE_MAX 1000 +#define PNG_USER_CHUNK_MALLOC_MAX 8000000 +#define PNG_USER_HEIGHT_MAX 1000000 +#define PNG_USER_WIDTH_MAX 1000000 +#define PNG_ZBUF_SIZE 8192 +#define PNG_ZLIB_VERNUM 0x1310 +#define PNG_Z_DEFAULT_COMPRESSION (-1) +#define PNG_Z_DEFAULT_NOFILTER_STRATEGY 0 +#define PNG_Z_DEFAULT_STRATEGY 1 +#define PNG_sCAL_PRECISION 5 +#define PNG_sRGB_PROFILE_CHECKS 2 +/* end of settings */ +#endif /* PNGLCONF_H */ diff --git a/dependencies/winx64/include/png.h b/dependencies/winx64/include/png.h new file mode 100644 index 0000000..9b069e4 --- /dev/null +++ b/dependencies/winx64/include/png.h @@ -0,0 +1,3358 @@ +/* png.h - header file for PNG reference library + * + * libpng version 1.6.47 + * + * Copyright (c) 2018-2025 Cosmin Truta + * Copyright (c) 1998-2002,2004,2006-2018 Glenn Randers-Pehrson + * Copyright (c) 1996-1997 Andreas Dilger + * Copyright (c) 1995-1996 Guy Eric Schalnat, Group 42, Inc. + * + * This code is released under the libpng license. (See LICENSE, below.) + * + * Authors and maintainers: + * libpng versions 0.71, May 1995, through 0.88, January 1996: Guy Schalnat + * libpng versions 0.89, June 1996, through 0.96, May 1997: Andreas Dilger + * libpng versions 0.97, January 1998, through 1.6.35, July 2018: + * Glenn Randers-Pehrson + * libpng versions 1.6.36, December 2018, through 1.6.47, February 2025: + * Cosmin Truta + * See also "Contributing Authors", below. + */ + +/* + * COPYRIGHT NOTICE, DISCLAIMER, and LICENSE + * ========================================= + * + * PNG Reference Library License version 2 + * --------------------------------------- + * + * * Copyright (c) 1995-2025 The PNG Reference Library Authors. + * * Copyright (c) 2018-2025 Cosmin Truta. + * * Copyright (c) 2000-2002, 2004, 2006-2018 Glenn Randers-Pehrson. + * * Copyright (c) 1996-1997 Andreas Dilger. + * * Copyright (c) 1995-1996 Guy Eric Schalnat, Group 42, Inc. + * + * The software is supplied "as is", without warranty of any kind, + * express or implied, including, without limitation, the warranties + * of merchantability, fitness for a particular purpose, title, and + * non-infringement. In no event shall the Copyright owners, or + * anyone distributing the software, be liable for any damages or + * other liability, whether in contract, tort or otherwise, arising + * from, out of, or in connection with the software, or the use or + * other dealings in the software, even if advised of the possibility + * of such damage. + * + * Permission is hereby granted to use, copy, modify, and distribute + * this software, or portions hereof, for any purpose, without fee, + * subject to the following restrictions: + * + * 1. The origin of this software must not be misrepresented; you + * must not claim that you wrote the original software. If you + * use this software in a product, an acknowledgment in the product + * documentation would be appreciated, but is not required. + * + * 2. Altered source versions must be plainly marked as such, and must + * not be misrepresented as being the original software. + * + * 3. This Copyright notice may not be removed or altered from any + * source or altered source distribution. + * + * + * PNG Reference Library License version 1 (for libpng 0.5 through 1.6.35) + * ----------------------------------------------------------------------- + * + * libpng versions 1.0.7, July 1, 2000, through 1.6.35, July 15, 2018 are + * Copyright (c) 2000-2002, 2004, 2006-2018 Glenn Randers-Pehrson, are + * derived from libpng-1.0.6, and are distributed according to the same + * disclaimer and license as libpng-1.0.6 with the following individuals + * added to the list of Contributing Authors: + * + * Simon-Pierre Cadieux + * Eric S. Raymond + * Mans Rullgard + * Cosmin Truta + * Gilles Vollant + * James Yu + * Mandar Sahastrabuddhe + * Google Inc. + * Vadim Barkov + * + * and with the following additions to the disclaimer: + * + * There is no warranty against interference with your enjoyment of + * the library or against infringement. There is no warranty that our + * efforts or the library will fulfill any of your particular purposes + * or needs. This library is provided with all faults, and the entire + * risk of satisfactory quality, performance, accuracy, and effort is + * with the user. + * + * Some files in the "contrib" directory and some configure-generated + * files that are distributed with libpng have other copyright owners, and + * are released under other open source licenses. + * + * libpng versions 0.97, January 1998, through 1.0.6, March 20, 2000, are + * Copyright (c) 1998-2000 Glenn Randers-Pehrson, are derived from + * libpng-0.96, and are distributed according to the same disclaimer and + * license as libpng-0.96, with the following individuals added to the + * list of Contributing Authors: + * + * Tom Lane + * Glenn Randers-Pehrson + * Willem van Schaik + * + * libpng versions 0.89, June 1996, through 0.96, May 1997, are + * Copyright (c) 1996-1997 Andreas Dilger, are derived from libpng-0.88, + * and are distributed according to the same disclaimer and license as + * libpng-0.88, with the following individuals added to the list of + * Contributing Authors: + * + * John Bowler + * Kevin Bracey + * Sam Bushell + * Magnus Holmgren + * Greg Roelofs + * Tom Tanner + * + * Some files in the "scripts" directory have other copyright owners, + * but are released under this license. + * + * libpng versions 0.5, May 1995, through 0.88, January 1996, are + * Copyright (c) 1995-1996 Guy Eric Schalnat, Group 42, Inc. + * + * For the purposes of this copyright and license, "Contributing Authors" + * is defined as the following set of individuals: + * + * Andreas Dilger + * Dave Martindale + * Guy Eric Schalnat + * Paul Schmidt + * Tim Wegner + * + * The PNG Reference Library is supplied "AS IS". The Contributing + * Authors and Group 42, Inc. disclaim all warranties, expressed or + * implied, including, without limitation, the warranties of + * merchantability and of fitness for any purpose. The Contributing + * Authors and Group 42, Inc. assume no liability for direct, indirect, + * incidental, special, exemplary, or consequential damages, which may + * result from the use of the PNG Reference Library, even if advised of + * the possibility of such damage. + * + * Permission is hereby granted to use, copy, modify, and distribute this + * source code, or portions hereof, for any purpose, without fee, subject + * to the following restrictions: + * + * 1. The origin of this source code must not be misrepresented. + * + * 2. Altered versions must be plainly marked as such and must not + * be misrepresented as being the original source. + * + * 3. This Copyright notice may not be removed or altered from any + * source or altered source distribution. + * + * The Contributing Authors and Group 42, Inc. specifically permit, + * without fee, and encourage the use of this source code as a component + * to supporting the PNG file format in commercial products. If you use + * this source code in a product, acknowledgment is not required but would + * be appreciated. + * + * END OF COPYRIGHT NOTICE, DISCLAIMER, and LICENSE. + * + * TRADEMARK + * ========= + * + * The name "libpng" has not been registered by the Copyright owners + * as a trademark in any jurisdiction. However, because libpng has + * been distributed and maintained world-wide, continually since 1995, + * the Copyright owners claim "common-law trademark protection" in any + * jurisdiction where common-law trademark is recognized. + */ + +/* + * A "png_get_copyright" function is available, for convenient use in "about" + * boxes and the like: + * + * printf("%s", png_get_copyright(NULL)); + * + * Also, the PNG logo (in PNG format, of course) is supplied in the + * files "pngbar.png" and "pngbar.jpg (88x31) and "pngnow.png" (98x31). + */ + +/* + * The contributing authors would like to thank all those who helped + * with testing, bug fixes, and patience. This wouldn't have been + * possible without all of you. + * + * Thanks to Frank J. T. Wojcik for helping with the documentation. + */ + +/* Note about libpng version numbers: + * + * Due to various miscommunications, unforeseen code incompatibilities + * and occasional factors outside the authors' control, version numbering + * on the library has not always been consistent and straightforward. + * The following table summarizes matters since version 0.89c, which was + * the first widely used release: + * + * source png.h png.h shared-lib + * version string int version + * ------- ------ ----- ---------- + * 0.89c "1.0 beta 3" 0.89 89 1.0.89 + * 0.90 "1.0 beta 4" 0.90 90 0.90 [should have been 2.0.90] + * 0.95 "1.0 beta 5" 0.95 95 0.95 [should have been 2.0.95] + * 0.96 "1.0 beta 6" 0.96 96 0.96 [should have been 2.0.96] + * 0.97b "1.00.97 beta 7" 1.00.97 97 1.0.1 [should have been 2.0.97] + * 0.97c 0.97 97 2.0.97 + * 0.98 0.98 98 2.0.98 + * 0.99 0.99 98 2.0.99 + * 0.99a-m 0.99 99 2.0.99 + * 1.00 1.00 100 2.1.0 [100 should be 10000] + * 1.0.0 (from here on, the 100 2.1.0 [100 should be 10000] + * 1.0.1 png.h string is 10001 2.1.0 + * 1.0.1a-e identical to the 10002 from here on, the shared library + * 1.0.2 source version) 10002 is 2.V where V is the source code + * 1.0.2a-b 10003 version, except as noted. + * 1.0.3 10003 + * 1.0.3a-d 10004 + * 1.0.4 10004 + * 1.0.4a-f 10005 + * 1.0.5 (+ 2 patches) 10005 + * 1.0.5a-d 10006 + * 1.0.5e-r 10100 (not source compatible) + * 1.0.5s-v 10006 (not binary compatible) + * 1.0.6 (+ 3 patches) 10006 (still binary incompatible) + * 1.0.6d-f 10007 (still binary incompatible) + * 1.0.6g 10007 + * 1.0.6h 10007 10.6h (testing xy.z so-numbering) + * 1.0.6i 10007 10.6i + * 1.0.6j 10007 2.1.0.6j (incompatible with 1.0.0) + * 1.0.7beta11-14 DLLNUM 10007 2.1.0.7beta11-14 (binary compatible) + * 1.0.7beta15-18 1 10007 2.1.0.7beta15-18 (binary compatible) + * 1.0.7rc1-2 1 10007 2.1.0.7rc1-2 (binary compatible) + * 1.0.7 1 10007 (still compatible) + * ... + * 1.0.69 10 10069 10.so.0.69[.0] + * ... + * 1.2.59 13 10259 12.so.0.59[.0] + * ... + * 1.4.20 14 10420 14.so.0.20[.0] + * ... + * 1.5.30 15 10530 15.so.15.30[.0] + * ... + * 1.6.47 16 10647 16.so.16.47[.0] + * + * Henceforth the source version will match the shared-library major and + * minor numbers; the shared-library major version number will be used for + * changes in backward compatibility, as it is intended. + * The PNG_LIBPNG_VER macro, which is not used within libpng but is + * available for applications, is an unsigned integer of the form XYYZZ + * corresponding to the source version X.Y.Z (leading zeros in Y and Z). + * Beta versions were given the previous public release number plus a + * letter, until version 1.0.6j; from then on they were given the upcoming + * public release number plus "betaNN" or "rcNN". + * + * Binary incompatibility exists only when applications make direct access + * to the info_ptr or png_ptr members through png.h, and the compiled + * application is loaded with a different version of the library. + * + * See libpng.txt or libpng.3 for more information. The PNG specification + * is available as a W3C Recommendation and as an ISO/IEC Standard; see + * + */ + +#ifndef PNG_H +#define PNG_H + +/* This is not the place to learn how to use libpng. The file libpng-manual.txt + * describes how to use libpng, and the file example.c summarizes it + * with some code on which to build. This file is useful for looking + * at the actual function definitions and structure components. If that + * file has been stripped from your copy of libpng, you can find it at + * + * + * If you just need to read a PNG file and don't want to read the documentation + * skip to the end of this file and read the section entitled 'simplified API'. + */ + +/* Version information for png.h - this should match the version in png.c */ +#define PNG_LIBPNG_VER_STRING "1.6.47" +#define PNG_HEADER_VERSION_STRING " libpng version " PNG_LIBPNG_VER_STRING "\n" + +/* The versions of shared library builds should stay in sync, going forward */ +#define PNG_LIBPNG_VER_SHAREDLIB 16 +#define PNG_LIBPNG_VER_SONUM PNG_LIBPNG_VER_SHAREDLIB /* [Deprecated] */ +#define PNG_LIBPNG_VER_DLLNUM PNG_LIBPNG_VER_SHAREDLIB /* [Deprecated] */ + +/* These should match the first 3 components of PNG_LIBPNG_VER_STRING: */ +#define PNG_LIBPNG_VER_MAJOR 1 +#define PNG_LIBPNG_VER_MINOR 6 +#define PNG_LIBPNG_VER_RELEASE 47 + +/* This should be zero for a public release, or non-zero for a + * development version. + */ +#define PNG_LIBPNG_VER_BUILD 0 + +/* Release Status */ +#define PNG_LIBPNG_BUILD_ALPHA 1 +#define PNG_LIBPNG_BUILD_BETA 2 +#define PNG_LIBPNG_BUILD_RC 3 +#define PNG_LIBPNG_BUILD_STABLE 4 +#define PNG_LIBPNG_BUILD_RELEASE_STATUS_MASK 7 + +/* Release-Specific Flags */ +#define PNG_LIBPNG_BUILD_PATCH 8 /* Can be OR'ed with + PNG_LIBPNG_BUILD_STABLE only */ +#define PNG_LIBPNG_BUILD_PRIVATE 16 /* Cannot be OR'ed with + PNG_LIBPNG_BUILD_SPECIAL */ +#define PNG_LIBPNG_BUILD_SPECIAL 32 /* Cannot be OR'ed with + PNG_LIBPNG_BUILD_PRIVATE */ + +#define PNG_LIBPNG_BUILD_BASE_TYPE PNG_LIBPNG_BUILD_STABLE + +/* Careful here. At one time, Guy wanted to use 082, but that + * would be octal. We must not include leading zeros. + * Versions 0.7 through 1.0.0 were in the range 0 to 100 here + * (only version 1.0.0 was mis-numbered 100 instead of 10000). + * From version 1.0.1 it is: + * XXYYZZ, where XX=major, YY=minor, ZZ=release + */ +#define PNG_LIBPNG_VER 10647 /* 1.6.47 */ + +/* Library configuration: these options cannot be changed after + * the library has been built. + */ +#ifndef PNGLCONF_H +/* If pnglibconf.h is missing, you can + * copy scripts/pnglibconf.h.prebuilt to pnglibconf.h + */ +# include "pnglibconf.h" +#endif + +#ifndef PNG_VERSION_INFO_ONLY +/* Machine specific configuration. */ +# include "pngconf.h" +#endif + +/* + * Added at libpng-1.2.8 + * + * Ref MSDN: Private as priority over Special + * VS_FF_PRIVATEBUILD File *was not* built using standard release + * procedures. If this value is given, the StringFileInfo block must + * contain a PrivateBuild string. + * + * VS_FF_SPECIALBUILD File *was* built by the original company using + * standard release procedures but is a variation of the standard + * file of the same version number. If this value is given, the + * StringFileInfo block must contain a SpecialBuild string. + */ + +#ifdef PNG_USER_PRIVATEBUILD /* From pnglibconf.h */ +# define PNG_LIBPNG_BUILD_TYPE \ + (PNG_LIBPNG_BUILD_BASE_TYPE | PNG_LIBPNG_BUILD_PRIVATE) +#else +# ifdef PNG_LIBPNG_SPECIALBUILD +# define PNG_LIBPNG_BUILD_TYPE \ + (PNG_LIBPNG_BUILD_BASE_TYPE | PNG_LIBPNG_BUILD_SPECIAL) +# else +# define PNG_LIBPNG_BUILD_TYPE (PNG_LIBPNG_BUILD_BASE_TYPE) +# endif +#endif + +#ifndef PNG_VERSION_INFO_ONLY + +/* Inhibit C++ name-mangling for libpng functions but not for system calls. */ +#ifdef __cplusplus +extern "C" { +#endif /* __cplusplus */ + +/* Version information for C files, stored in png.c. This had better match + * the version above. + */ +#define png_libpng_ver png_get_header_ver(NULL) + +/* This file is arranged in several sections: + * + * 1. [omitted] + * 2. Any configuration options that can be specified by for the application + * code when it is built. (Build time configuration is in pnglibconf.h) + * 3. Type definitions (base types are defined in pngconf.h), structure + * definitions. + * 4. Exported library functions. + * 5. Simplified API. + * 6. Implementation options. + * + * The library source code has additional files (principally pngpriv.h) that + * allow configuration of the library. + */ + +/* Section 1: [omitted] */ + +/* Section 2: run time configuration + * See pnglibconf.h for build time configuration + * + * Run time configuration allows the application to choose between + * implementations of certain arithmetic APIs. The default is set + * at build time and recorded in pnglibconf.h, but it is safe to + * override these (and only these) settings. Note that this won't + * change what the library does, only application code, and the + * settings can (and probably should) be made on a per-file basis + * by setting the #defines before including png.h + * + * Use macros to read integers from PNG data or use the exported + * functions? + * PNG_USE_READ_MACROS: use the macros (see below) Note that + * the macros evaluate their argument multiple times. + * PNG_NO_USE_READ_MACROS: call the relevant library function. + * + * Use the alternative algorithm for compositing alpha samples that + * does not use division? + * PNG_READ_COMPOSITE_NODIV_SUPPORTED: use the 'no division' + * algorithm. + * PNG_NO_READ_COMPOSITE_NODIV: use the 'division' algorithm. + * + * How to handle benign errors if PNG_ALLOW_BENIGN_ERRORS is + * false? + * PNG_ALLOW_BENIGN_ERRORS: map calls to the benign error + * APIs to png_warning. + * Otherwise the calls are mapped to png_error. + */ + +/* Section 3: type definitions, including structures and compile time + * constants. + * See pngconf.h for base types that vary by machine/system + */ + +/* This triggers a compiler error in png.c, if png.c and png.h + * do not agree upon the version number. + */ +typedef char* png_libpng_version_1_6_47; + +/* Basic control structions. Read libpng-manual.txt or libpng.3 for more info. + * + * png_struct is the cache of information used while reading or writing a single + * PNG file. One of these is always required, although the simplified API + * (below) hides the creation and destruction of it. + */ +typedef struct png_struct_def png_struct; +typedef const png_struct * png_const_structp; +typedef png_struct * png_structp; +typedef png_struct * * png_structpp; + +/* png_info contains information read from or to be written to a PNG file. One + * or more of these must exist while reading or creating a PNG file. The + * information is not used by libpng during read but is used to control what + * gets written when a PNG file is created. "png_get_" function calls read + * information during read and "png_set_" functions calls write information + * when creating a PNG. + * been moved into a separate header file that is not accessible to + * applications. Read libpng-manual.txt or libpng.3 for more info. + */ +typedef struct png_info_def png_info; +typedef png_info * png_infop; +typedef const png_info * png_const_infop; +typedef png_info * * png_infopp; + +/* Types with names ending 'p' are pointer types. The corresponding types with + * names ending 'rp' are identical pointer types except that the pointer is + * marked 'restrict', which means that it is the only pointer to the object + * passed to the function. Applications should not use the 'restrict' types; + * it is always valid to pass 'p' to a pointer with a function argument of the + * corresponding 'rp' type. Different compilers have different rules with + * regard to type matching in the presence of 'restrict'. For backward + * compatibility libpng callbacks never have 'restrict' in their parameters and, + * consequentially, writing portable application code is extremely difficult if + * an attempt is made to use 'restrict'. + */ +typedef png_struct * PNG_RESTRICT png_structrp; +typedef const png_struct * PNG_RESTRICT png_const_structrp; +typedef png_info * PNG_RESTRICT png_inforp; +typedef const png_info * PNG_RESTRICT png_const_inforp; + +/* Three color definitions. The order of the red, green, and blue, (and the + * exact size) is not important, although the size of the fields need to + * be png_byte or png_uint_16 (as defined below). + */ +typedef struct png_color_struct +{ + png_byte red; + png_byte green; + png_byte blue; +} png_color; +typedef png_color * png_colorp; +typedef const png_color * png_const_colorp; +typedef png_color * * png_colorpp; + +typedef struct png_color_16_struct +{ + png_byte index; /* used for palette files */ + png_uint_16 red; /* for use in red green blue files */ + png_uint_16 green; + png_uint_16 blue; + png_uint_16 gray; /* for use in grayscale files */ +} png_color_16; +typedef png_color_16 * png_color_16p; +typedef const png_color_16 * png_const_color_16p; +typedef png_color_16 * * png_color_16pp; + +typedef struct png_color_8_struct +{ + png_byte red; /* for use in red green blue files */ + png_byte green; + png_byte blue; + png_byte gray; /* for use in grayscale files */ + png_byte alpha; /* for alpha channel files */ +} png_color_8; +typedef png_color_8 * png_color_8p; +typedef const png_color_8 * png_const_color_8p; +typedef png_color_8 * * png_color_8pp; + +/* + * The following two structures are used for the in-core representation + * of sPLT chunks. + */ +typedef struct png_sPLT_entry_struct +{ + png_uint_16 red; + png_uint_16 green; + png_uint_16 blue; + png_uint_16 alpha; + png_uint_16 frequency; +} png_sPLT_entry; +typedef png_sPLT_entry * png_sPLT_entryp; +typedef const png_sPLT_entry * png_const_sPLT_entryp; +typedef png_sPLT_entry * * png_sPLT_entrypp; + +/* When the depth of the sPLT palette is 8 bits, the color and alpha samples + * occupy the LSB of their respective members, and the MSB of each member + * is zero-filled. The frequency member always occupies the full 16 bits. + */ + +typedef struct png_sPLT_struct +{ + png_charp name; /* palette name */ + png_byte depth; /* depth of palette samples */ + png_sPLT_entryp entries; /* palette entries */ + png_int_32 nentries; /* number of palette entries */ +} png_sPLT_t; +typedef png_sPLT_t * png_sPLT_tp; +typedef const png_sPLT_t * png_const_sPLT_tp; +typedef png_sPLT_t * * png_sPLT_tpp; + +#ifdef PNG_TEXT_SUPPORTED +/* png_text holds the contents of a text/ztxt/itxt chunk in a PNG file, + * and whether that contents is compressed or not. The "key" field + * points to a regular zero-terminated C string. The "text" fields can be a + * regular C string, an empty string, or a NULL pointer. + * However, the structure returned by png_get_text() will always contain + * the "text" field as a regular zero-terminated C string (possibly + * empty), never a NULL pointer, so it can be safely used in printf() and + * other string-handling functions. Note that the "itxt_length", "lang", and + * "lang_key" members of the structure only exist when the library is built + * with iTXt chunk support. Prior to libpng-1.4.0 the library was built by + * default without iTXt support. Also note that when iTXt *is* supported, + * the "lang" and "lang_key" fields contain NULL pointers when the + * "compression" field contains * PNG_TEXT_COMPRESSION_NONE or + * PNG_TEXT_COMPRESSION_zTXt. Note that the "compression value" is not the + * same as what appears in the PNG tEXt/zTXt/iTXt chunk's "compression flag" + * which is always 0 or 1, or its "compression method" which is always 0. + */ +typedef struct png_text_struct +{ + int compression; /* compression value: + -1: tEXt, none + 0: zTXt, deflate + 1: iTXt, none + 2: iTXt, deflate */ + png_charp key; /* keyword, 1-79 character description of "text" */ + png_charp text; /* comment, may be an empty string (ie "") + or a NULL pointer */ + size_t text_length; /* length of the text string */ + size_t itxt_length; /* length of the itxt string */ + png_charp lang; /* language code, 0-79 characters + or a NULL pointer */ + png_charp lang_key; /* keyword translated UTF-8 string, 0 or more + chars or a NULL pointer */ +} png_text; +typedef png_text * png_textp; +typedef const png_text * png_const_textp; +typedef png_text * * png_textpp; +#endif + +/* Supported compression types for text in PNG files (tEXt, and zTXt). + * The values of the PNG_TEXT_COMPRESSION_ defines should NOT be changed. */ +#define PNG_TEXT_COMPRESSION_NONE_WR -3 +#define PNG_TEXT_COMPRESSION_zTXt_WR -2 +#define PNG_TEXT_COMPRESSION_NONE -1 +#define PNG_TEXT_COMPRESSION_zTXt 0 +#define PNG_ITXT_COMPRESSION_NONE 1 +#define PNG_ITXT_COMPRESSION_zTXt 2 +#define PNG_TEXT_COMPRESSION_LAST 3 /* Not a valid value */ + +/* png_time is a way to hold the time in an machine independent way. + * Two conversions are provided, both from time_t and struct tm. There + * is no portable way to convert to either of these structures, as far + * as I know. If you know of a portable way, send it to me. As a side + * note - PNG has always been Year 2000 compliant! + */ +typedef struct png_time_struct +{ + png_uint_16 year; /* full year, as in, 1995 */ + png_byte month; /* month of year, 1 - 12 */ + png_byte day; /* day of month, 1 - 31 */ + png_byte hour; /* hour of day, 0 - 23 */ + png_byte minute; /* minute of hour, 0 - 59 */ + png_byte second; /* second of minute, 0 - 60 (for leap seconds) */ +} png_time; +typedef png_time * png_timep; +typedef const png_time * png_const_timep; +typedef png_time * * png_timepp; + +#if defined(PNG_STORE_UNKNOWN_CHUNKS_SUPPORTED) ||\ + defined(PNG_USER_CHUNKS_SUPPORTED) +/* png_unknown_chunk is a structure to hold queued chunks for which there is + * no specific support. The idea is that we can use this to queue + * up private chunks for output even though the library doesn't actually + * know about their semantics. + * + * The data in the structure is set by libpng on read and used on write. + */ +typedef struct png_unknown_chunk_t +{ + png_byte name[5]; /* Textual chunk name with '\0' terminator */ + png_byte *data; /* Data, should not be modified on read! */ + size_t size; + + /* On write 'location' must be set using the flag values listed below. + * Notice that on read it is set by libpng however the values stored have + * more bits set than are listed below. Always treat the value as a + * bitmask. On write set only one bit - setting multiple bits may cause the + * chunk to be written in multiple places. + */ + png_byte location; /* mode of operation at read time */ +} +png_unknown_chunk; + +typedef png_unknown_chunk * png_unknown_chunkp; +typedef const png_unknown_chunk * png_const_unknown_chunkp; +typedef png_unknown_chunk * * png_unknown_chunkpp; +#endif + +/* Flag values for the unknown chunk location byte. */ +#define PNG_HAVE_IHDR 0x01 +#define PNG_HAVE_PLTE 0x02 +#define PNG_AFTER_IDAT 0x08 + +/* Maximum positive integer used in PNG is (2^31)-1 */ +#define PNG_UINT_31_MAX ((png_uint_32)0x7fffffffL) +#define PNG_UINT_32_MAX ((png_uint_32)(-1)) +#define PNG_SIZE_MAX ((size_t)(-1)) + +/* These are constants for fixed point values encoded in the + * PNG specification manner (x100000) + */ +#define PNG_FP_1 100000 +#define PNG_FP_HALF 50000 +#define PNG_FP_MAX ((png_fixed_point)0x7fffffffL) +#define PNG_FP_MIN (-PNG_FP_MAX) + +/* These describe the color_type field in png_info. */ +/* color type masks */ +#define PNG_COLOR_MASK_PALETTE 1 +#define PNG_COLOR_MASK_COLOR 2 +#define PNG_COLOR_MASK_ALPHA 4 + +/* color types. Note that not all combinations are legal */ +#define PNG_COLOR_TYPE_GRAY 0 +#define PNG_COLOR_TYPE_PALETTE (PNG_COLOR_MASK_COLOR | PNG_COLOR_MASK_PALETTE) +#define PNG_COLOR_TYPE_RGB (PNG_COLOR_MASK_COLOR) +#define PNG_COLOR_TYPE_RGB_ALPHA (PNG_COLOR_MASK_COLOR | PNG_COLOR_MASK_ALPHA) +#define PNG_COLOR_TYPE_GRAY_ALPHA (PNG_COLOR_MASK_ALPHA) +/* aliases */ +#define PNG_COLOR_TYPE_RGBA PNG_COLOR_TYPE_RGB_ALPHA +#define PNG_COLOR_TYPE_GA PNG_COLOR_TYPE_GRAY_ALPHA + +/* This is for compression type. PNG 1.0-1.2 only define the single type. */ +#define PNG_COMPRESSION_TYPE_BASE 0 /* Deflate method 8, 32K window */ +#define PNG_COMPRESSION_TYPE_DEFAULT PNG_COMPRESSION_TYPE_BASE + +/* This is for filter type. PNG 1.0-1.2 only define the single type. */ +#define PNG_FILTER_TYPE_BASE 0 /* Single row per-byte filtering */ +#define PNG_INTRAPIXEL_DIFFERENCING 64 /* Used only in MNG datastreams */ +#define PNG_FILTER_TYPE_DEFAULT PNG_FILTER_TYPE_BASE + +/* These are for the interlacing type. These values should NOT be changed. */ +#define PNG_INTERLACE_NONE 0 /* Non-interlaced image */ +#define PNG_INTERLACE_ADAM7 1 /* Adam7 interlacing */ +#define PNG_INTERLACE_LAST 2 /* Not a valid value */ + +/* These are for the oFFs chunk. These values should NOT be changed. */ +#define PNG_OFFSET_PIXEL 0 /* Offset in pixels */ +#define PNG_OFFSET_MICROMETER 1 /* Offset in micrometers (1/10^6 meter) */ +#define PNG_OFFSET_LAST 2 /* Not a valid value */ + +/* These are for the pCAL chunk. These values should NOT be changed. */ +#define PNG_EQUATION_LINEAR 0 /* Linear transformation */ +#define PNG_EQUATION_BASE_E 1 /* Exponential base e transform */ +#define PNG_EQUATION_ARBITRARY 2 /* Arbitrary base exponential transform */ +#define PNG_EQUATION_HYPERBOLIC 3 /* Hyperbolic sine transformation */ +#define PNG_EQUATION_LAST 4 /* Not a valid value */ + +/* These are for the sCAL chunk. These values should NOT be changed. */ +#define PNG_SCALE_UNKNOWN 0 /* unknown unit (image scale) */ +#define PNG_SCALE_METER 1 /* meters per pixel */ +#define PNG_SCALE_RADIAN 2 /* radians per pixel */ +#define PNG_SCALE_LAST 3 /* Not a valid value */ + +/* These are for the pHYs chunk. These values should NOT be changed. */ +#define PNG_RESOLUTION_UNKNOWN 0 /* pixels/unknown unit (aspect ratio) */ +#define PNG_RESOLUTION_METER 1 /* pixels/meter */ +#define PNG_RESOLUTION_LAST 2 /* Not a valid value */ + +/* These are for the sRGB chunk. These values should NOT be changed. */ +#define PNG_sRGB_INTENT_PERCEPTUAL 0 +#define PNG_sRGB_INTENT_RELATIVE 1 +#define PNG_sRGB_INTENT_SATURATION 2 +#define PNG_sRGB_INTENT_ABSOLUTE 3 +#define PNG_sRGB_INTENT_LAST 4 /* Not a valid value */ + +/* This is for text chunks */ +#define PNG_KEYWORD_MAX_LENGTH 79 + +/* Maximum number of entries in PLTE/sPLT/tRNS arrays */ +#define PNG_MAX_PALETTE_LENGTH 256 + +/* These determine if an ancillary chunk's data has been successfully read + * from the PNG header, or if the application has filled in the corresponding + * data in the info_struct to be written into the output file. The values + * of the PNG_INFO_ defines should NOT be changed. + */ +#define PNG_INFO_gAMA 0x0001U +#define PNG_INFO_sBIT 0x0002U +#define PNG_INFO_cHRM 0x0004U +#define PNG_INFO_PLTE 0x0008U +#define PNG_INFO_tRNS 0x0010U +#define PNG_INFO_bKGD 0x0020U +#define PNG_INFO_hIST 0x0040U +#define PNG_INFO_pHYs 0x0080U +#define PNG_INFO_oFFs 0x0100U +#define PNG_INFO_tIME 0x0200U +#define PNG_INFO_pCAL 0x0400U +#define PNG_INFO_sRGB 0x0800U /* GR-P, 0.96a */ +#define PNG_INFO_iCCP 0x1000U /* ESR, 1.0.6 */ +#define PNG_INFO_sPLT 0x2000U /* ESR, 1.0.6 */ +#define PNG_INFO_sCAL 0x4000U /* ESR, 1.0.6 */ +#define PNG_INFO_IDAT 0x8000U /* ESR, 1.0.6 */ +#define PNG_INFO_eXIf 0x10000U /* GR-P, 1.6.31 */ +#define PNG_INFO_cICP 0x20000U /* PNGv3: 1.6.45 */ +#define PNG_INFO_cLLI 0x40000U /* PNGv3: 1.6.45 */ +#define PNG_INFO_mDCV 0x80000U /* PNGv3: 1.6.45 */ +/* APNG: these chunks are stored as unknown, these flags are never set + * however they are provided as a convenience for implementors of APNG and + * avoids any merge conflicts. + * + * Private chunks: these chunk names violate the chunk name recommendations + * because the chunk definitions have no signature and because the private + * chunks with these names have been reserved. Private definitions should + * avoid them. + */ +#define PNG_INFO_acTL 0x100000U /* PNGv3: 1.6.45: unknown */ +#define PNG_INFO_fcTL 0x200000U /* PNGv3: 1.6.45: unknown */ +#define PNG_INFO_fdAT 0x400000U /* PNGv3: 1.6.45: unknown */ + +/* This is used for the transformation routines, as some of them + * change these values for the row. It also should enable using + * the routines for other purposes. + */ +typedef struct png_row_info_struct +{ + png_uint_32 width; /* width of row */ + size_t rowbytes; /* number of bytes in row */ + png_byte color_type; /* color type of row */ + png_byte bit_depth; /* bit depth of row */ + png_byte channels; /* number of channels (1, 2, 3, or 4) */ + png_byte pixel_depth; /* bits per pixel (depth * channels) */ +} png_row_info; + +typedef png_row_info * png_row_infop; +typedef png_row_info * * png_row_infopp; + +/* These are the function types for the I/O functions and for the functions + * that allow the user to override the default I/O functions with his or her + * own. The png_error_ptr type should match that of user-supplied warning + * and error functions, while the png_rw_ptr type should match that of the + * user read/write data functions. Note that the 'write' function must not + * modify the buffer it is passed. The 'read' function, on the other hand, is + * expected to return the read data in the buffer. + */ +typedef PNG_CALLBACK(void, *png_error_ptr, (png_structp, png_const_charp)); +typedef PNG_CALLBACK(void, *png_rw_ptr, (png_structp, png_bytep, size_t)); +typedef PNG_CALLBACK(void, *png_flush_ptr, (png_structp)); +typedef PNG_CALLBACK(void, *png_read_status_ptr, (png_structp, png_uint_32, + int)); +typedef PNG_CALLBACK(void, *png_write_status_ptr, (png_structp, png_uint_32, + int)); + +#ifdef PNG_PROGRESSIVE_READ_SUPPORTED +typedef PNG_CALLBACK(void, *png_progressive_info_ptr, (png_structp, png_infop)); +typedef PNG_CALLBACK(void, *png_progressive_end_ptr, (png_structp, png_infop)); + +/* The following callback receives png_uint_32 row_number, int pass for the + * png_bytep data of the row. When transforming an interlaced image the + * row number is the row number within the sub-image of the interlace pass, so + * the value will increase to the height of the sub-image (not the full image) + * then reset to 0 for the next pass. + * + * Use PNG_ROW_FROM_PASS_ROW(row, pass) and PNG_COL_FROM_PASS_COL(col, pass) to + * find the output pixel (x,y) given an interlaced sub-image pixel + * (row,col,pass). (See below for these macros.) + */ +typedef PNG_CALLBACK(void, *png_progressive_row_ptr, (png_structp, png_bytep, + png_uint_32, int)); +#endif + +#if defined(PNG_READ_USER_TRANSFORM_SUPPORTED) || \ + defined(PNG_WRITE_USER_TRANSFORM_SUPPORTED) +typedef PNG_CALLBACK(void, *png_user_transform_ptr, (png_structp, png_row_infop, + png_bytep)); +#endif + +#ifdef PNG_USER_CHUNKS_SUPPORTED +typedef PNG_CALLBACK(int, *png_user_chunk_ptr, (png_structp, + png_unknown_chunkp)); +#endif +#ifdef PNG_UNKNOWN_CHUNKS_SUPPORTED +/* not used anywhere */ +/* typedef PNG_CALLBACK(void, *png_unknown_chunk_ptr, (png_structp)); */ +#endif + +#ifdef PNG_SETJMP_SUPPORTED +/* This must match the function definition in , and the application + * must include this before png.h to obtain the definition of jmp_buf. The + * function is required to be PNG_NORETURN, but this is not checked. If the + * function does return the application will crash via an abort() or similar + * system level call. + * + * If you get a warning here while building the library you may need to make + * changes to ensure that pnglibconf.h records the calling convention used by + * your compiler. This may be very difficult - try using a different compiler + * to build the library! + */ +PNG_FUNCTION(void, (PNGCAPI *png_longjmp_ptr), (jmp_buf, int), typedef); +#endif + +/* Transform masks for the high-level interface */ +#define PNG_TRANSFORM_IDENTITY 0x0000 /* read and write */ +#define PNG_TRANSFORM_STRIP_16 0x0001 /* read only */ +#define PNG_TRANSFORM_STRIP_ALPHA 0x0002 /* read only */ +#define PNG_TRANSFORM_PACKING 0x0004 /* read and write */ +#define PNG_TRANSFORM_PACKSWAP 0x0008 /* read and write */ +#define PNG_TRANSFORM_EXPAND 0x0010 /* read only */ +#define PNG_TRANSFORM_INVERT_MONO 0x0020 /* read and write */ +#define PNG_TRANSFORM_SHIFT 0x0040 /* read and write */ +#define PNG_TRANSFORM_BGR 0x0080 /* read and write */ +#define PNG_TRANSFORM_SWAP_ALPHA 0x0100 /* read and write */ +#define PNG_TRANSFORM_SWAP_ENDIAN 0x0200 /* read and write */ +#define PNG_TRANSFORM_INVERT_ALPHA 0x0400 /* read and write */ +#define PNG_TRANSFORM_STRIP_FILLER 0x0800 /* write only */ +/* Added to libpng-1.2.34 */ +#define PNG_TRANSFORM_STRIP_FILLER_BEFORE PNG_TRANSFORM_STRIP_FILLER +#define PNG_TRANSFORM_STRIP_FILLER_AFTER 0x1000 /* write only */ +/* Added to libpng-1.4.0 */ +#define PNG_TRANSFORM_GRAY_TO_RGB 0x2000 /* read only */ +/* Added to libpng-1.5.4 */ +#define PNG_TRANSFORM_EXPAND_16 0x4000 /* read only */ +#if ~0U > 0xffffU /* or else this might break on a 16-bit machine */ +#define PNG_TRANSFORM_SCALE_16 0x8000 /* read only */ +#endif + +/* Flags for MNG supported features */ +#define PNG_FLAG_MNG_EMPTY_PLTE 0x01 +#define PNG_FLAG_MNG_FILTER_64 0x04 +#define PNG_ALL_MNG_FEATURES 0x05 + +/* NOTE: prior to 1.5 these functions had no 'API' style declaration, + * this allowed the zlib default functions to be used on Windows + * platforms. In 1.5 the zlib default malloc (which just calls malloc and + * ignores the first argument) should be completely compatible with the + * following. + */ +typedef PNG_CALLBACK(png_voidp, *png_malloc_ptr, (png_structp, + png_alloc_size_t)); +typedef PNG_CALLBACK(void, *png_free_ptr, (png_structp, png_voidp)); + +/* Section 4: exported functions + * Here are the function definitions most commonly used. This is not + * the place to find out how to use libpng. See libpng-manual.txt for the + * full explanation, see example.c for the summary. This just provides + * a simple one line description of the use of each function. + * + * The PNG_EXPORT() and PNG_EXPORTA() macros used below are defined in + * pngconf.h and in the *.dfn files in the scripts directory. + * + * PNG_EXPORT(ordinal, type, name, (args)); + * + * ordinal: ordinal that is used while building + * *.def files. The ordinal value is only + * relevant when preprocessing png.h with + * the *.dfn files for building symbol table + * entries, and are removed by pngconf.h. + * type: return type of the function + * name: function name + * args: function arguments, with types + * + * When we wish to append attributes to a function prototype we use + * the PNG_EXPORTA() macro instead. + * + * PNG_EXPORTA(ordinal, type, name, (args), attributes); + * + * ordinal, type, name, and args: same as in PNG_EXPORT(). + * attributes: function attributes + */ + +/* Returns the version number of the library */ +PNG_EXPORT(1, png_uint_32, png_access_version_number, (void)); + +/* Tell lib we have already handled the first magic bytes. + * Handling more than 8 bytes from the beginning of the file is an error. + */ +PNG_EXPORT(2, void, png_set_sig_bytes, (png_structrp png_ptr, int num_bytes)); + +/* Check sig[start] through sig[start + num_to_check - 1] to see if it's a + * PNG file. Returns zero if the supplied bytes match the 8-byte PNG + * signature, and non-zero otherwise. Having num_to_check == 0 or + * start > 7 will always fail (i.e. return non-zero). + */ +PNG_EXPORT(3, int, png_sig_cmp, (png_const_bytep sig, size_t start, + size_t num_to_check)); + +/* Simple signature checking function. This is the same as calling + * png_check_sig(sig, n) := (png_sig_cmp(sig, 0, n) == 0). + */ +#define png_check_sig(sig, n) (png_sig_cmp((sig), 0, (n)) == 0) /* DEPRECATED */ + +/* Allocate and initialize png_ptr struct for reading, and any other memory. */ +PNG_EXPORTA(4, png_structp, png_create_read_struct, + (png_const_charp user_png_ver, png_voidp error_ptr, + png_error_ptr error_fn, png_error_ptr warn_fn), + PNG_ALLOCATED); + +/* Allocate and initialize png_ptr struct for writing, and any other memory */ +PNG_EXPORTA(5, png_structp, png_create_write_struct, + (png_const_charp user_png_ver, png_voidp error_ptr, png_error_ptr error_fn, + png_error_ptr warn_fn), + PNG_ALLOCATED); + +PNG_EXPORT(6, size_t, png_get_compression_buffer_size, + (png_const_structrp png_ptr)); + +PNG_EXPORT(7, void, png_set_compression_buffer_size, (png_structrp png_ptr, + size_t size)); + +/* Moved from pngconf.h in 1.4.0 and modified to ensure setjmp/longjmp + * match up. + */ +#ifdef PNG_SETJMP_SUPPORTED +/* This function returns the jmp_buf built in to *png_ptr. It must be + * supplied with an appropriate 'longjmp' function to use on that jmp_buf + * unless the default error function is overridden in which case NULL is + * acceptable. The size of the jmp_buf is checked against the actual size + * allocated by the library - the call will return NULL on a mismatch + * indicating an ABI mismatch. + */ +PNG_EXPORT(8, jmp_buf*, png_set_longjmp_fn, (png_structrp png_ptr, + png_longjmp_ptr longjmp_fn, size_t jmp_buf_size)); +# define png_jmpbuf(png_ptr) \ + (*png_set_longjmp_fn((png_ptr), longjmp, (sizeof (jmp_buf)))) +#else +# define png_jmpbuf(png_ptr) \ + (LIBPNG_WAS_COMPILED_WITH__PNG_NO_SETJMP) +#endif +/* This function should be used by libpng applications in place of + * longjmp(png_ptr->jmpbuf, val). If longjmp_fn() has been set, it + * will use it; otherwise it will call PNG_ABORT(). This function was + * added in libpng-1.5.0. + */ +PNG_EXPORTA(9, void, png_longjmp, (png_const_structrp png_ptr, int val), + PNG_NORETURN); + +#ifdef PNG_READ_SUPPORTED +/* Reset the compression stream */ +PNG_EXPORTA(10, int, png_reset_zstream, (png_structrp png_ptr), PNG_DEPRECATED); +#endif + +/* New functions added in libpng-1.0.2 (not enabled by default until 1.2.0) */ +#ifdef PNG_USER_MEM_SUPPORTED +PNG_EXPORTA(11, png_structp, png_create_read_struct_2, + (png_const_charp user_png_ver, png_voidp error_ptr, png_error_ptr error_fn, + png_error_ptr warn_fn, + png_voidp mem_ptr, png_malloc_ptr malloc_fn, png_free_ptr free_fn), + PNG_ALLOCATED); +PNG_EXPORTA(12, png_structp, png_create_write_struct_2, + (png_const_charp user_png_ver, png_voidp error_ptr, png_error_ptr error_fn, + png_error_ptr warn_fn, + png_voidp mem_ptr, png_malloc_ptr malloc_fn, png_free_ptr free_fn), + PNG_ALLOCATED); +#endif + +/* Write the PNG file signature. */ +PNG_EXPORT(13, void, png_write_sig, (png_structrp png_ptr)); + +/* Write a PNG chunk - size, type, (optional) data, CRC. */ +PNG_EXPORT(14, void, png_write_chunk, (png_structrp png_ptr, png_const_bytep + chunk_name, png_const_bytep data, size_t length)); + +/* Write the start of a PNG chunk - length and chunk name. */ +PNG_EXPORT(15, void, png_write_chunk_start, (png_structrp png_ptr, + png_const_bytep chunk_name, png_uint_32 length)); + +/* Write the data of a PNG chunk started with png_write_chunk_start(). */ +PNG_EXPORT(16, void, png_write_chunk_data, (png_structrp png_ptr, + png_const_bytep data, size_t length)); + +/* Finish a chunk started with png_write_chunk_start() (includes CRC). */ +PNG_EXPORT(17, void, png_write_chunk_end, (png_structrp png_ptr)); + +/* Allocate and initialize the info structure */ +PNG_EXPORTA(18, png_infop, png_create_info_struct, (png_const_structrp png_ptr), + PNG_ALLOCATED); + +/* DEPRECATED: this function allowed init structures to be created using the + * default allocation method (typically malloc). Use is deprecated in 1.6.0 and + * the API will be removed in the future. + */ +PNG_EXPORTA(19, void, png_info_init_3, (png_infopp info_ptr, + size_t png_info_struct_size), PNG_DEPRECATED); + +/* Writes all the PNG information before the image. */ +PNG_EXPORT(20, void, png_write_info_before_PLTE, + (png_structrp png_ptr, png_const_inforp info_ptr)); +PNG_EXPORT(21, void, png_write_info, + (png_structrp png_ptr, png_const_inforp info_ptr)); + +#ifdef PNG_SEQUENTIAL_READ_SUPPORTED +/* Read the information before the actual image data. */ +PNG_EXPORT(22, void, png_read_info, + (png_structrp png_ptr, png_inforp info_ptr)); +#endif + +#ifdef PNG_TIME_RFC1123_SUPPORTED + /* Convert to a US string format: there is no localization support in this + * routine. The original implementation used a 29 character buffer in + * png_struct, this will be removed in future versions. + */ +#if PNG_LIBPNG_VER < 10700 +/* To do: remove this from libpng17 (and from libpng17/png.c and pngstruct.h) */ +PNG_EXPORTA(23, png_const_charp, png_convert_to_rfc1123, (png_structrp png_ptr, + png_const_timep ptime),PNG_DEPRECATED); +#endif +PNG_EXPORT(241, int, png_convert_to_rfc1123_buffer, (char out[29], + png_const_timep ptime)); +#endif + +#ifdef PNG_CONVERT_tIME_SUPPORTED +/* Convert from a struct tm to png_time */ +PNG_EXPORT(24, void, png_convert_from_struct_tm, (png_timep ptime, + const struct tm * ttime)); + +/* Convert from time_t to png_time. Uses gmtime() */ +PNG_EXPORT(25, void, png_convert_from_time_t, (png_timep ptime, time_t ttime)); +#endif /* CONVERT_tIME */ + +#ifdef PNG_READ_EXPAND_SUPPORTED +/* Expand data to 24-bit RGB, or 8-bit grayscale, with alpha if available. */ +PNG_EXPORT(26, void, png_set_expand, (png_structrp png_ptr)); +PNG_EXPORT(27, void, png_set_expand_gray_1_2_4_to_8, (png_structrp png_ptr)); +PNG_EXPORT(28, void, png_set_palette_to_rgb, (png_structrp png_ptr)); +PNG_EXPORT(29, void, png_set_tRNS_to_alpha, (png_structrp png_ptr)); +#endif + +#ifdef PNG_READ_EXPAND_16_SUPPORTED +/* Expand to 16-bit channels, forces conversion of palette to RGB and expansion + * of a tRNS chunk if present. + */ +PNG_EXPORT(221, void, png_set_expand_16, (png_structrp png_ptr)); +#endif + +#if defined(PNG_READ_BGR_SUPPORTED) || defined(PNG_WRITE_BGR_SUPPORTED) +/* Use blue, green, red order for pixels. */ +PNG_EXPORT(30, void, png_set_bgr, (png_structrp png_ptr)); +#endif + +#ifdef PNG_READ_GRAY_TO_RGB_SUPPORTED +/* Expand the grayscale to 24-bit RGB if necessary. */ +PNG_EXPORT(31, void, png_set_gray_to_rgb, (png_structrp png_ptr)); +#endif + +#ifdef PNG_READ_RGB_TO_GRAY_SUPPORTED +/* Reduce RGB to grayscale. */ +#define PNG_ERROR_ACTION_NONE 1 +#define PNG_ERROR_ACTION_WARN 2 +#define PNG_ERROR_ACTION_ERROR 3 +#define PNG_RGB_TO_GRAY_DEFAULT (-1)/*for red/green coefficients*/ + +PNG_FP_EXPORT(32, void, png_set_rgb_to_gray, (png_structrp png_ptr, + int error_action, double red, double green)) +PNG_FIXED_EXPORT(33, void, png_set_rgb_to_gray_fixed, (png_structrp png_ptr, + int error_action, png_fixed_point red, png_fixed_point green)) + +PNG_EXPORT(34, png_byte, png_get_rgb_to_gray_status, (png_const_structrp + png_ptr)); +#endif + +#ifdef PNG_BUILD_GRAYSCALE_PALETTE_SUPPORTED +PNG_EXPORT(35, void, png_build_grayscale_palette, (int bit_depth, + png_colorp palette)); +#endif + +#ifdef PNG_READ_ALPHA_MODE_SUPPORTED +/* How the alpha channel is interpreted - this affects how the color channels + * of a PNG file are returned to the calling application when an alpha channel, + * or a tRNS chunk in a palette file, is present. + * + * This has no effect on the way pixels are written into a PNG output + * datastream. The color samples in a PNG datastream are never premultiplied + * with the alpha samples. + * + * The default is to return data according to the PNG specification: the alpha + * channel is a linear measure of the contribution of the pixel to the + * corresponding composited pixel, and the color channels are unassociated + * (not premultiplied). The gamma encoded color channels must be scaled + * according to the contribution and to do this it is necessary to undo + * the encoding, scale the color values, perform the composition and re-encode + * the values. This is the 'PNG' mode. + * + * The alternative is to 'associate' the alpha with the color information by + * storing color channel values that have been scaled by the alpha. + * image. These are the 'STANDARD', 'ASSOCIATED' or 'PREMULTIPLIED' modes + * (the latter being the two common names for associated alpha color channels). + * + * For the 'OPTIMIZED' mode, a pixel is treated as opaque only if the alpha + * value is equal to the maximum value. + * + * The final choice is to gamma encode the alpha channel as well. This is + * broken because, in practice, no implementation that uses this choice + * correctly undoes the encoding before handling alpha composition. Use this + * choice only if other serious errors in the software or hardware you use + * mandate it; the typical serious error is for dark halos to appear around + * opaque areas of the composited PNG image because of arithmetic overflow. + * + * The API function png_set_alpha_mode specifies which of these choices to use + * with an enumerated 'mode' value and the gamma of the required output: + */ +#define PNG_ALPHA_PNG 0 /* according to the PNG standard */ +#define PNG_ALPHA_STANDARD 1 /* according to Porter/Duff */ +#define PNG_ALPHA_ASSOCIATED 1 /* as above; this is the normal practice */ +#define PNG_ALPHA_PREMULTIPLIED 1 /* as above */ +#define PNG_ALPHA_OPTIMIZED 2 /* 'PNG' for opaque pixels, else 'STANDARD' */ +#define PNG_ALPHA_BROKEN 3 /* the alpha channel is gamma encoded */ + +PNG_FP_EXPORT(227, void, png_set_alpha_mode, (png_structrp png_ptr, int mode, + double output_gamma)) +PNG_FIXED_EXPORT(228, void, png_set_alpha_mode_fixed, (png_structrp png_ptr, + int mode, png_fixed_point output_gamma)) +#endif + +#if defined(PNG_GAMMA_SUPPORTED) || defined(PNG_READ_ALPHA_MODE_SUPPORTED) +/* The output_gamma value is a screen gamma in libpng terminology: it expresses + * how to decode the output values, not how they are encoded. + */ +#define PNG_DEFAULT_sRGB -1 /* sRGB gamma and color space */ +#define PNG_GAMMA_MAC_18 -2 /* Old Mac '1.8' gamma and color space */ +#define PNG_GAMMA_sRGB 220000 /* Television standards--matches sRGB gamma */ +#define PNG_GAMMA_LINEAR PNG_FP_1 /* Linear */ +#endif + +/* The following are examples of calls to png_set_alpha_mode to achieve the + * required overall gamma correction and, where necessary, alpha + * premultiplication. + * + * png_set_alpha_mode(pp, PNG_ALPHA_PNG, PNG_DEFAULT_sRGB); + * This is the default libpng handling of the alpha channel - it is not + * pre-multiplied into the color components. In addition the call states + * that the output is for a sRGB system and causes all PNG files without gAMA + * chunks to be assumed to be encoded using sRGB. + * + * png_set_alpha_mode(pp, PNG_ALPHA_PNG, PNG_GAMMA_MAC); + * In this case the output is assumed to be something like an sRGB conformant + * display preceded by a power-law lookup table of power 1.45. This is how + * early Mac systems behaved. + * + * png_set_alpha_mode(pp, PNG_ALPHA_STANDARD, PNG_GAMMA_LINEAR); + * This is the classic Jim Blinn approach and will work in academic + * environments where everything is done by the book. It has the shortcoming + * of assuming that input PNG data with no gamma information is linear - this + * is unlikely to be correct unless the PNG files where generated locally. + * Most of the time the output precision will be so low as to show + * significant banding in dark areas of the image. + * + * png_set_expand_16(pp); + * png_set_alpha_mode(pp, PNG_ALPHA_STANDARD, PNG_DEFAULT_sRGB); + * This is a somewhat more realistic Jim Blinn inspired approach. PNG files + * are assumed to have the sRGB encoding if not marked with a gamma value and + * the output is always 16 bits per component. This permits accurate scaling + * and processing of the data. If you know that your input PNG files were + * generated locally you might need to replace PNG_DEFAULT_sRGB with the + * correct value for your system. + * + * png_set_alpha_mode(pp, PNG_ALPHA_OPTIMIZED, PNG_DEFAULT_sRGB); + * If you just need to composite the PNG image onto an existing background + * and if you control the code that does this you can use the optimization + * setting. In this case you just copy completely opaque pixels to the + * output. For pixels that are not completely transparent (you just skip + * those) you do the composition math using png_composite or png_composite_16 + * below then encode the resultant 8-bit or 16-bit values to match the output + * encoding. + * + * Other cases + * If neither the PNG nor the standard linear encoding work for you because + * of the software or hardware you use then you have a big problem. The PNG + * case will probably result in halos around the image. The linear encoding + * will probably result in a washed out, too bright, image (it's actually too + * contrasty.) Try the ALPHA_OPTIMIZED mode above - this will probably + * substantially reduce the halos. Alternatively try: + * + * png_set_alpha_mode(pp, PNG_ALPHA_BROKEN, PNG_DEFAULT_sRGB); + * This option will also reduce the halos, but there will be slight dark + * halos round the opaque parts of the image where the background is light. + * In the OPTIMIZED mode the halos will be light halos where the background + * is dark. Take your pick - the halos are unavoidable unless you can get + * your hardware/software fixed! (The OPTIMIZED approach is slightly + * faster.) + * + * When the default gamma of PNG files doesn't match the output gamma. + * If you have PNG files with no gamma information png_set_alpha_mode allows + * you to provide a default gamma, but it also sets the output gamma to the + * matching value. If you know your PNG files have a gamma that doesn't + * match the output you can take advantage of the fact that + * png_set_alpha_mode always sets the output gamma but only sets the PNG + * default if it is not already set: + * + * png_set_alpha_mode(pp, PNG_ALPHA_PNG, PNG_DEFAULT_sRGB); + * png_set_alpha_mode(pp, PNG_ALPHA_PNG, PNG_GAMMA_MAC); + * The first call sets both the default and the output gamma values, the + * second call overrides the output gamma without changing the default. This + * is easier than achieving the same effect with png_set_gamma. You must use + * PNG_ALPHA_PNG for the first call - internal checking in png_set_alpha will + * fire if more than one call to png_set_alpha_mode and png_set_background is + * made in the same read operation, however multiple calls with PNG_ALPHA_PNG + * are ignored. + */ + +#ifdef PNG_READ_STRIP_ALPHA_SUPPORTED +PNG_EXPORT(36, void, png_set_strip_alpha, (png_structrp png_ptr)); +#endif + +#if defined(PNG_READ_SWAP_ALPHA_SUPPORTED) || \ + defined(PNG_WRITE_SWAP_ALPHA_SUPPORTED) +PNG_EXPORT(37, void, png_set_swap_alpha, (png_structrp png_ptr)); +#endif + +#if defined(PNG_READ_INVERT_ALPHA_SUPPORTED) || \ + defined(PNG_WRITE_INVERT_ALPHA_SUPPORTED) +PNG_EXPORT(38, void, png_set_invert_alpha, (png_structrp png_ptr)); +#endif + +#if defined(PNG_READ_FILLER_SUPPORTED) || defined(PNG_WRITE_FILLER_SUPPORTED) +/* Add a filler byte to 8-bit or 16-bit Gray or 24-bit or 48-bit RGB images. */ +PNG_EXPORT(39, void, png_set_filler, (png_structrp png_ptr, png_uint_32 filler, + int flags)); +/* The values of the PNG_FILLER_ defines should NOT be changed */ +# define PNG_FILLER_BEFORE 0 +# define PNG_FILLER_AFTER 1 +/* Add an alpha byte to 8-bit or 16-bit Gray or 24-bit or 48-bit RGB images. */ +PNG_EXPORT(40, void, png_set_add_alpha, (png_structrp png_ptr, + png_uint_32 filler, int flags)); +#endif /* READ_FILLER || WRITE_FILLER */ + +#if defined(PNG_READ_SWAP_SUPPORTED) || defined(PNG_WRITE_SWAP_SUPPORTED) +/* Swap bytes in 16-bit depth files. */ +PNG_EXPORT(41, void, png_set_swap, (png_structrp png_ptr)); +#endif + +#if defined(PNG_READ_PACK_SUPPORTED) || defined(PNG_WRITE_PACK_SUPPORTED) +/* Use 1 byte per pixel in 1, 2, or 4-bit depth files. */ +PNG_EXPORT(42, void, png_set_packing, (png_structrp png_ptr)); +#endif + +#if defined(PNG_READ_PACKSWAP_SUPPORTED) || \ + defined(PNG_WRITE_PACKSWAP_SUPPORTED) +/* Swap packing order of pixels in bytes. */ +PNG_EXPORT(43, void, png_set_packswap, (png_structrp png_ptr)); +#endif + +#if defined(PNG_READ_SHIFT_SUPPORTED) || defined(PNG_WRITE_SHIFT_SUPPORTED) +/* Converts files to legal bit depths. */ +PNG_EXPORT(44, void, png_set_shift, (png_structrp png_ptr, png_const_color_8p + true_bits)); +#endif + +#if defined(PNG_READ_INTERLACING_SUPPORTED) || \ + defined(PNG_WRITE_INTERLACING_SUPPORTED) +/* Have the code handle the interlacing. Returns the number of passes. + * MUST be called before png_read_update_info or png_start_read_image, + * otherwise it will not have the desired effect. Note that it is still + * necessary to call png_read_row or png_read_rows png_get_image_height + * times for each pass. +*/ +PNG_EXPORT(45, int, png_set_interlace_handling, (png_structrp png_ptr)); +#endif + +#if defined(PNG_READ_INVERT_SUPPORTED) || defined(PNG_WRITE_INVERT_SUPPORTED) +/* Invert monochrome files */ +PNG_EXPORT(46, void, png_set_invert_mono, (png_structrp png_ptr)); +#endif + +#ifdef PNG_READ_BACKGROUND_SUPPORTED +/* Handle alpha and tRNS by replacing with a background color. Prior to + * libpng-1.5.4 this API must not be called before the PNG file header has been + * read. Doing so will result in unexpected behavior and possible warnings or + * errors if the PNG file contains a bKGD chunk. + */ +PNG_FP_EXPORT(47, void, png_set_background, (png_structrp png_ptr, + png_const_color_16p background_color, int background_gamma_code, + int need_expand, double background_gamma)) +PNG_FIXED_EXPORT(215, void, png_set_background_fixed, (png_structrp png_ptr, + png_const_color_16p background_color, int background_gamma_code, + int need_expand, png_fixed_point background_gamma)) +#endif +#ifdef PNG_READ_BACKGROUND_SUPPORTED +# define PNG_BACKGROUND_GAMMA_UNKNOWN 0 +# define PNG_BACKGROUND_GAMMA_SCREEN 1 +# define PNG_BACKGROUND_GAMMA_FILE 2 +# define PNG_BACKGROUND_GAMMA_UNIQUE 3 +#endif + +#ifdef PNG_READ_SCALE_16_TO_8_SUPPORTED +/* Scale a 16-bit depth file down to 8-bit, accurately. */ +PNG_EXPORT(229, void, png_set_scale_16, (png_structrp png_ptr)); +#endif + +#ifdef PNG_READ_STRIP_16_TO_8_SUPPORTED +#define PNG_READ_16_TO_8_SUPPORTED /* Name prior to 1.5.4 */ +/* Strip the second byte of information from a 16-bit depth file. */ +PNG_EXPORT(48, void, png_set_strip_16, (png_structrp png_ptr)); +#endif + +#ifdef PNG_READ_QUANTIZE_SUPPORTED +/* Turn on quantizing, and reduce the palette to the number of colors + * available. + */ +PNG_EXPORT(49, void, png_set_quantize, (png_structrp png_ptr, + png_colorp palette, int num_palette, int maximum_colors, + png_const_uint_16p histogram, int full_quantize)); +#endif + +#ifdef PNG_READ_GAMMA_SUPPORTED +/* The threshold on gamma processing is configurable but hard-wired into the + * library. The following is the floating point variant. + */ +#define PNG_GAMMA_THRESHOLD (PNG_GAMMA_THRESHOLD_FIXED*.00001) + +/* Handle gamma correction. Screen_gamma=(display_exponent). + * NOTE: this API simply sets the screen and file gamma values. It will + * therefore override the value for gamma in a PNG file if it is called after + * the file header has been read - use with care - call before reading the PNG + * file for best results! + * + * These routines accept the same gamma values as png_set_alpha_mode (described + * above). The PNG_GAMMA_ defines and PNG_DEFAULT_sRGB can be passed to either + * API (floating point or fixed.) Notice, however, that the 'file_gamma' value + * is the inverse of a 'screen gamma' value. + */ +PNG_FP_EXPORT(50, void, png_set_gamma, (png_structrp png_ptr, + double screen_gamma, double override_file_gamma)) +PNG_FIXED_EXPORT(208, void, png_set_gamma_fixed, (png_structrp png_ptr, + png_fixed_point screen_gamma, png_fixed_point override_file_gamma)) +#endif + +#ifdef PNG_WRITE_FLUSH_SUPPORTED +/* Set how many lines between output flushes - 0 for no flushing */ +PNG_EXPORT(51, void, png_set_flush, (png_structrp png_ptr, int nrows)); +/* Flush the current PNG output buffer */ +PNG_EXPORT(52, void, png_write_flush, (png_structrp png_ptr)); +#endif + +/* Optional update palette with requested transformations */ +PNG_EXPORT(53, void, png_start_read_image, (png_structrp png_ptr)); + +/* Optional call to update the users info structure */ +PNG_EXPORT(54, void, png_read_update_info, (png_structrp png_ptr, + png_inforp info_ptr)); + +#ifdef PNG_SEQUENTIAL_READ_SUPPORTED +/* Read one or more rows of image data. */ +PNG_EXPORT(55, void, png_read_rows, (png_structrp png_ptr, png_bytepp row, + png_bytepp display_row, png_uint_32 num_rows)); +#endif + +#ifdef PNG_SEQUENTIAL_READ_SUPPORTED +/* Read a row of data. */ +PNG_EXPORT(56, void, png_read_row, (png_structrp png_ptr, png_bytep row, + png_bytep display_row)); +#endif + +#ifdef PNG_SEQUENTIAL_READ_SUPPORTED +/* Read the whole image into memory at once. */ +PNG_EXPORT(57, void, png_read_image, (png_structrp png_ptr, png_bytepp image)); +#endif + +/* Write a row of image data */ +PNG_EXPORT(58, void, png_write_row, (png_structrp png_ptr, + png_const_bytep row)); + +/* Write a few rows of image data: (*row) is not written; however, the type + * is declared as writeable to maintain compatibility with previous versions + * of libpng and to allow the 'display_row' array from read_rows to be passed + * unchanged to write_rows. + */ +PNG_EXPORT(59, void, png_write_rows, (png_structrp png_ptr, png_bytepp row, + png_uint_32 num_rows)); + +/* Write the image data */ +PNG_EXPORT(60, void, png_write_image, (png_structrp png_ptr, png_bytepp image)); + +/* Write the end of the PNG file. */ +PNG_EXPORT(61, void, png_write_end, (png_structrp png_ptr, + png_inforp info_ptr)); + +#ifdef PNG_SEQUENTIAL_READ_SUPPORTED +/* Read the end of the PNG file. */ +PNG_EXPORT(62, void, png_read_end, (png_structrp png_ptr, png_inforp info_ptr)); +#endif + +/* Free any memory associated with the png_info_struct */ +PNG_EXPORT(63, void, png_destroy_info_struct, (png_const_structrp png_ptr, + png_infopp info_ptr_ptr)); + +/* Free any memory associated with the png_struct and the png_info_structs */ +PNG_EXPORT(64, void, png_destroy_read_struct, (png_structpp png_ptr_ptr, + png_infopp info_ptr_ptr, png_infopp end_info_ptr_ptr)); + +/* Free any memory associated with the png_struct and the png_info_structs */ +PNG_EXPORT(65, void, png_destroy_write_struct, (png_structpp png_ptr_ptr, + png_infopp info_ptr_ptr)); + +/* Set the libpng method of handling chunk CRC errors */ +PNG_EXPORT(66, void, png_set_crc_action, (png_structrp png_ptr, int crit_action, + int ancil_action)); + +/* Values for png_set_crc_action() say how to handle CRC errors in + * ancillary and critical chunks, and whether to use the data contained + * therein. Note that it is impossible to "discard" data in a critical + * chunk. For versions prior to 0.90, the action was always error/quit, + * whereas in version 0.90 and later, the action for CRC errors in ancillary + * chunks is warn/discard. These values should NOT be changed. + * + * value action:critical action:ancillary + */ +#define PNG_CRC_DEFAULT 0 /* error/quit warn/discard data */ +#define PNG_CRC_ERROR_QUIT 1 /* error/quit error/quit */ +#define PNG_CRC_WARN_DISCARD 2 /* (INVALID) warn/discard data */ +#define PNG_CRC_WARN_USE 3 /* warn/use data warn/use data */ +#define PNG_CRC_QUIET_USE 4 /* quiet/use data quiet/use data */ +#define PNG_CRC_NO_CHANGE 5 /* use current value use current value */ + +#ifdef PNG_WRITE_SUPPORTED +/* These functions give the user control over the scan-line filtering in + * libpng and the compression methods used by zlib. These functions are + * mainly useful for testing, as the defaults should work with most users. + * Those users who are tight on memory or want faster performance at the + * expense of compression can modify them. See the compression library + * header file (zlib.h) for an explanation of the compression functions. + */ + +/* Set the filtering method(s) used by libpng. Currently, the only valid + * value for "method" is 0. + */ +PNG_EXPORT(67, void, png_set_filter, (png_structrp png_ptr, int method, + int filters)); +#endif /* WRITE */ + +/* Flags for png_set_filter() to say which filters to use. The flags + * are chosen so that they don't conflict with real filter types + * below, in case they are supplied instead of the #defined constants. + * These values should NOT be changed. + */ +#define PNG_NO_FILTERS 0x00 +#define PNG_FILTER_NONE 0x08 +#define PNG_FILTER_SUB 0x10 +#define PNG_FILTER_UP 0x20 +#define PNG_FILTER_AVG 0x40 +#define PNG_FILTER_PAETH 0x80 +#define PNG_FAST_FILTERS (PNG_FILTER_NONE | PNG_FILTER_SUB | PNG_FILTER_UP) +#define PNG_ALL_FILTERS (PNG_FAST_FILTERS | PNG_FILTER_AVG | PNG_FILTER_PAETH) + +/* Filter values (not flags) - used in pngwrite.c, pngwutil.c for now. + * These defines should NOT be changed. + */ +#define PNG_FILTER_VALUE_NONE 0 +#define PNG_FILTER_VALUE_SUB 1 +#define PNG_FILTER_VALUE_UP 2 +#define PNG_FILTER_VALUE_AVG 3 +#define PNG_FILTER_VALUE_PAETH 4 +#define PNG_FILTER_VALUE_LAST 5 + +#ifdef PNG_WRITE_SUPPORTED +#ifdef PNG_WRITE_WEIGHTED_FILTER_SUPPORTED /* DEPRECATED */ +PNG_FP_EXPORT(68, void, png_set_filter_heuristics, (png_structrp png_ptr, + int heuristic_method, int num_weights, png_const_doublep filter_weights, + png_const_doublep filter_costs)) +PNG_FIXED_EXPORT(209, void, png_set_filter_heuristics_fixed, + (png_structrp png_ptr, int heuristic_method, int num_weights, + png_const_fixed_point_p filter_weights, + png_const_fixed_point_p filter_costs)) +#endif /* WRITE_WEIGHTED_FILTER */ + +/* The following are no longer used and will be removed from libpng-1.7: */ +#define PNG_FILTER_HEURISTIC_DEFAULT 0 /* Currently "UNWEIGHTED" */ +#define PNG_FILTER_HEURISTIC_UNWEIGHTED 1 /* Used by libpng < 0.95 */ +#define PNG_FILTER_HEURISTIC_WEIGHTED 2 /* Experimental feature */ +#define PNG_FILTER_HEURISTIC_LAST 3 /* Not a valid value */ + +/* Set the library compression level. Currently, valid values range from + * 0 - 9, corresponding directly to the zlib compression levels 0 - 9 + * (0 - no compression, 9 - "maximal" compression). Note that tests have + * shown that zlib compression levels 3-6 usually perform as well as level 9 + * for PNG images, and do considerably fewer calculations. In the future, + * these values may not correspond directly to the zlib compression levels. + */ +#ifdef PNG_WRITE_CUSTOMIZE_COMPRESSION_SUPPORTED +PNG_EXPORT(69, void, png_set_compression_level, (png_structrp png_ptr, + int level)); + +PNG_EXPORT(70, void, png_set_compression_mem_level, (png_structrp png_ptr, + int mem_level)); + +PNG_EXPORT(71, void, png_set_compression_strategy, (png_structrp png_ptr, + int strategy)); + +/* If PNG_WRITE_OPTIMIZE_CMF_SUPPORTED is defined, libpng will use a + * smaller value of window_bits if it can do so safely. + */ +PNG_EXPORT(72, void, png_set_compression_window_bits, (png_structrp png_ptr, + int window_bits)); + +PNG_EXPORT(73, void, png_set_compression_method, (png_structrp png_ptr, + int method)); +#endif /* WRITE_CUSTOMIZE_COMPRESSION */ + +#ifdef PNG_WRITE_CUSTOMIZE_ZTXT_COMPRESSION_SUPPORTED +/* Also set zlib parameters for compressing non-IDAT chunks */ +PNG_EXPORT(222, void, png_set_text_compression_level, (png_structrp png_ptr, + int level)); + +PNG_EXPORT(223, void, png_set_text_compression_mem_level, (png_structrp png_ptr, + int mem_level)); + +PNG_EXPORT(224, void, png_set_text_compression_strategy, (png_structrp png_ptr, + int strategy)); + +/* If PNG_WRITE_OPTIMIZE_CMF_SUPPORTED is defined, libpng will use a + * smaller value of window_bits if it can do so safely. + */ +PNG_EXPORT(225, void, png_set_text_compression_window_bits, + (png_structrp png_ptr, int window_bits)); + +PNG_EXPORT(226, void, png_set_text_compression_method, (png_structrp png_ptr, + int method)); +#endif /* WRITE_CUSTOMIZE_ZTXT_COMPRESSION */ +#endif /* WRITE */ + +/* These next functions are called for input/output, memory, and error + * handling. They are in the file pngrio.c, pngwio.c, and pngerror.c, + * and call standard C I/O routines such as fread(), fwrite(), and + * fprintf(). These functions can be made to use other I/O routines + * at run time for those applications that need to handle I/O in a + * different manner by calling png_set_???_fn(). See libpng-manual.txt for + * more information. + */ + +#ifdef PNG_STDIO_SUPPORTED +/* Initialize the input/output for the PNG file to the default functions. */ +PNG_EXPORT(74, void, png_init_io, (png_structrp png_ptr, png_FILE_p fp)); +#endif + +/* Replace the (error and abort), and warning functions with user + * supplied functions. If no messages are to be printed you must still + * write and use replacement functions. The replacement error_fn should + * still do a longjmp to the last setjmp location if you are using this + * method of error handling. If error_fn or warning_fn is NULL, the + * default function will be used. + */ + +PNG_EXPORT(75, void, png_set_error_fn, (png_structrp png_ptr, + png_voidp error_ptr, png_error_ptr error_fn, png_error_ptr warning_fn)); + +/* Return the user pointer associated with the error functions */ +PNG_EXPORT(76, png_voidp, png_get_error_ptr, (png_const_structrp png_ptr)); + +/* Replace the default data output functions with a user supplied one(s). + * If buffered output is not used, then output_flush_fn can be set to NULL. + * If PNG_WRITE_FLUSH_SUPPORTED is not defined at libpng compile time + * output_flush_fn will be ignored (and thus can be NULL). + * It is probably a mistake to use NULL for output_flush_fn if + * write_data_fn is not also NULL unless you have built libpng with + * PNG_WRITE_FLUSH_SUPPORTED undefined, because in this case libpng's + * default flush function, which uses the standard *FILE structure, will + * be used. + */ +PNG_EXPORT(77, void, png_set_write_fn, (png_structrp png_ptr, png_voidp io_ptr, + png_rw_ptr write_data_fn, png_flush_ptr output_flush_fn)); + +/* Replace the default data input function with a user supplied one. */ +PNG_EXPORT(78, void, png_set_read_fn, (png_structrp png_ptr, png_voidp io_ptr, + png_rw_ptr read_data_fn)); + +/* Return the user pointer associated with the I/O functions */ +PNG_EXPORT(79, png_voidp, png_get_io_ptr, (png_const_structrp png_ptr)); + +PNG_EXPORT(80, void, png_set_read_status_fn, (png_structrp png_ptr, + png_read_status_ptr read_row_fn)); + +PNG_EXPORT(81, void, png_set_write_status_fn, (png_structrp png_ptr, + png_write_status_ptr write_row_fn)); + +#ifdef PNG_USER_MEM_SUPPORTED +/* Replace the default memory allocation functions with user supplied one(s). */ +PNG_EXPORT(82, void, png_set_mem_fn, (png_structrp png_ptr, png_voidp mem_ptr, + png_malloc_ptr malloc_fn, png_free_ptr free_fn)); +/* Return the user pointer associated with the memory functions */ +PNG_EXPORT(83, png_voidp, png_get_mem_ptr, (png_const_structrp png_ptr)); +#endif + +#ifdef PNG_READ_USER_TRANSFORM_SUPPORTED +PNG_EXPORT(84, void, png_set_read_user_transform_fn, (png_structrp png_ptr, + png_user_transform_ptr read_user_transform_fn)); +#endif + +#ifdef PNG_WRITE_USER_TRANSFORM_SUPPORTED +PNG_EXPORT(85, void, png_set_write_user_transform_fn, (png_structrp png_ptr, + png_user_transform_ptr write_user_transform_fn)); +#endif + +#ifdef PNG_USER_TRANSFORM_PTR_SUPPORTED +PNG_EXPORT(86, void, png_set_user_transform_info, (png_structrp png_ptr, + png_voidp user_transform_ptr, int user_transform_depth, + int user_transform_channels)); +/* Return the user pointer associated with the user transform functions */ +PNG_EXPORT(87, png_voidp, png_get_user_transform_ptr, + (png_const_structrp png_ptr)); +#endif + +#ifdef PNG_USER_TRANSFORM_INFO_SUPPORTED +/* Return information about the row currently being processed. Note that these + * APIs do not fail but will return unexpected results if called outside a user + * transform callback. Also note that when transforming an interlaced image the + * row number is the row number within the sub-image of the interlace pass, so + * the value will increase to the height of the sub-image (not the full image) + * then reset to 0 for the next pass. + * + * Use PNG_ROW_FROM_PASS_ROW(row, pass) and PNG_COL_FROM_PASS_COL(col, pass) to + * find the output pixel (x,y) given an interlaced sub-image pixel + * (row,col,pass). (See below for these macros.) + */ +PNG_EXPORT(217, png_uint_32, png_get_current_row_number, (png_const_structrp)); +PNG_EXPORT(218, png_byte, png_get_current_pass_number, (png_const_structrp)); +#endif + +#ifdef PNG_READ_USER_CHUNKS_SUPPORTED +/* This callback is called only for *unknown* chunks. If + * PNG_HANDLE_AS_UNKNOWN_SUPPORTED is set then it is possible to set known + * chunks to be treated as unknown, however in this case the callback must do + * any processing required by the chunk (e.g. by calling the appropriate + * png_set_ APIs.) + * + * There is no write support - on write, by default, all the chunks in the + * 'unknown' list are written in the specified position. + * + * The integer return from the callback function is interpreted thus: + * + * negative: An error occurred; png_chunk_error will be called. + * zero: The chunk was not handled, the chunk will be saved. A critical + * chunk will cause an error at this point unless it is to be saved. + * positive: The chunk was handled, libpng will ignore/discard it. + * + * See "INTERACTION WITH USER CHUNK CALLBACKS" below for important notes about + * how this behavior will change in libpng 1.7 + */ +PNG_EXPORT(88, void, png_set_read_user_chunk_fn, (png_structrp png_ptr, + png_voidp user_chunk_ptr, png_user_chunk_ptr read_user_chunk_fn)); +#endif + +#ifdef PNG_USER_CHUNKS_SUPPORTED +PNG_EXPORT(89, png_voidp, png_get_user_chunk_ptr, (png_const_structrp png_ptr)); +#endif + +#ifdef PNG_PROGRESSIVE_READ_SUPPORTED +/* Sets the function callbacks for the push reader, and a pointer to a + * user-defined structure available to the callback functions. + */ +PNG_EXPORT(90, void, png_set_progressive_read_fn, (png_structrp png_ptr, + png_voidp progressive_ptr, png_progressive_info_ptr info_fn, + png_progressive_row_ptr row_fn, png_progressive_end_ptr end_fn)); + +/* Returns the user pointer associated with the push read functions */ +PNG_EXPORT(91, png_voidp, png_get_progressive_ptr, + (png_const_structrp png_ptr)); + +/* Function to be called when data becomes available */ +PNG_EXPORT(92, void, png_process_data, (png_structrp png_ptr, + png_inforp info_ptr, png_bytep buffer, size_t buffer_size)); + +/* A function which may be called *only* within png_process_data to stop the + * processing of any more data. The function returns the number of bytes + * remaining, excluding any that libpng has cached internally. A subsequent + * call to png_process_data must supply these bytes again. If the argument + * 'save' is set to true the routine will first save all the pending data and + * will always return 0. + */ +PNG_EXPORT(219, size_t, png_process_data_pause, (png_structrp, int save)); + +/* A function which may be called *only* outside (after) a call to + * png_process_data. It returns the number of bytes of data to skip in the + * input. Normally it will return 0, but if it returns a non-zero value the + * application must skip than number of bytes of input data and pass the + * following data to the next call to png_process_data. + */ +PNG_EXPORT(220, png_uint_32, png_process_data_skip, (png_structrp)); + +/* Function that combines rows. 'new_row' is a flag that should come from + * the callback and be non-NULL if anything needs to be done; the library + * stores its own version of the new data internally and ignores the passed + * in value. + */ +PNG_EXPORT(93, void, png_progressive_combine_row, (png_const_structrp png_ptr, + png_bytep old_row, png_const_bytep new_row)); +#endif /* PROGRESSIVE_READ */ + +PNG_EXPORTA(94, png_voidp, png_malloc, (png_const_structrp png_ptr, + png_alloc_size_t size), PNG_ALLOCATED); +/* Added at libpng version 1.4.0 */ +PNG_EXPORTA(95, png_voidp, png_calloc, (png_const_structrp png_ptr, + png_alloc_size_t size), PNG_ALLOCATED); + +/* Added at libpng version 1.2.4 */ +PNG_EXPORTA(96, png_voidp, png_malloc_warn, (png_const_structrp png_ptr, + png_alloc_size_t size), PNG_ALLOCATED); + +/* Frees a pointer allocated by png_malloc() */ +PNG_EXPORT(97, void, png_free, (png_const_structrp png_ptr, png_voidp ptr)); + +/* Free data that was allocated internally */ +PNG_EXPORT(98, void, png_free_data, (png_const_structrp png_ptr, + png_inforp info_ptr, png_uint_32 free_me, int num)); + +/* Reassign the responsibility for freeing existing data, whether allocated + * by libpng or by the application; this works on the png_info structure passed + * in, without changing the state for other png_info structures. + */ +PNG_EXPORT(99, void, png_data_freer, (png_const_structrp png_ptr, + png_inforp info_ptr, int freer, png_uint_32 mask)); + +/* Assignments for png_data_freer */ +#define PNG_DESTROY_WILL_FREE_DATA 1 +#define PNG_SET_WILL_FREE_DATA 1 +#define PNG_USER_WILL_FREE_DATA 2 +/* Flags for png_ptr->free_me and info_ptr->free_me */ +#define PNG_FREE_HIST 0x0008U +#define PNG_FREE_ICCP 0x0010U +#define PNG_FREE_SPLT 0x0020U +#define PNG_FREE_ROWS 0x0040U +#define PNG_FREE_PCAL 0x0080U +#define PNG_FREE_SCAL 0x0100U +#ifdef PNG_STORE_UNKNOWN_CHUNKS_SUPPORTED +# define PNG_FREE_UNKN 0x0200U +#endif +/* PNG_FREE_LIST 0x0400U removed in 1.6.0 because it is ignored */ +#define PNG_FREE_PLTE 0x1000U +#define PNG_FREE_TRNS 0x2000U +#define PNG_FREE_TEXT 0x4000U +#define PNG_FREE_EXIF 0x8000U /* Added at libpng-1.6.31 */ +#define PNG_FREE_ALL 0xffffU +#define PNG_FREE_MUL 0x4220U /* PNG_FREE_SPLT|PNG_FREE_TEXT|PNG_FREE_UNKN */ + +#ifdef PNG_USER_MEM_SUPPORTED +PNG_EXPORTA(100, png_voidp, png_malloc_default, (png_const_structrp png_ptr, + png_alloc_size_t size), PNG_ALLOCATED PNG_DEPRECATED); +PNG_EXPORTA(101, void, png_free_default, (png_const_structrp png_ptr, + png_voidp ptr), PNG_DEPRECATED); +#endif + +#ifdef PNG_ERROR_TEXT_SUPPORTED +/* Fatal error in PNG image of libpng - can't continue */ +PNG_EXPORTA(102, void, png_error, (png_const_structrp png_ptr, + png_const_charp error_message), PNG_NORETURN); + +/* The same, but the chunk name is prepended to the error string. */ +PNG_EXPORTA(103, void, png_chunk_error, (png_const_structrp png_ptr, + png_const_charp error_message), PNG_NORETURN); + +#else +/* Fatal error in PNG image of libpng - can't continue */ +PNG_EXPORTA(104, void, png_err, (png_const_structrp png_ptr), PNG_NORETURN); +# define png_error(s1,s2) png_err(s1) +# define png_chunk_error(s1,s2) png_err(s1) +#endif + +#ifdef PNG_WARNINGS_SUPPORTED +/* Non-fatal error in libpng. Can continue, but may have a problem. */ +PNG_EXPORT(105, void, png_warning, (png_const_structrp png_ptr, + png_const_charp warning_message)); + +/* Non-fatal error in libpng, chunk name is prepended to message. */ +PNG_EXPORT(106, void, png_chunk_warning, (png_const_structrp png_ptr, + png_const_charp warning_message)); +#else +# define png_warning(s1,s2) ((void)(s1)) +# define png_chunk_warning(s1,s2) ((void)(s1)) +#endif + +#ifdef PNG_BENIGN_ERRORS_SUPPORTED +/* Benign error in libpng. Can continue, but may have a problem. + * User can choose whether to handle as a fatal error or as a warning. */ +PNG_EXPORT(107, void, png_benign_error, (png_const_structrp png_ptr, + png_const_charp warning_message)); + +#ifdef PNG_READ_SUPPORTED +/* Same, chunk name is prepended to message (only during read) */ +PNG_EXPORT(108, void, png_chunk_benign_error, (png_const_structrp png_ptr, + png_const_charp warning_message)); +#endif + +PNG_EXPORT(109, void, png_set_benign_errors, + (png_structrp png_ptr, int allowed)); +#else +# ifdef PNG_ALLOW_BENIGN_ERRORS +# define png_benign_error png_warning +# define png_chunk_benign_error png_chunk_warning +# else +# define png_benign_error png_error +# define png_chunk_benign_error png_chunk_error +# endif +#endif + +/* The png_set_ functions are for storing values in the png_info_struct. + * Similarly, the png_get_ calls are used to read values from the + * png_info_struct, either storing the parameters in the passed variables, or + * setting pointers into the png_info_struct where the data is stored. The + * png_get_ functions return a non-zero value if the data was available + * in info_ptr, or return zero and do not change any of the parameters if the + * data was not available. + * + * These functions should be used instead of directly accessing png_info + * to avoid problems with future changes in the size and internal layout of + * png_info_struct. + */ +/* Returns "flag" if chunk data is valid in info_ptr. */ +PNG_EXPORT(110, png_uint_32, png_get_valid, (png_const_structrp png_ptr, + png_const_inforp info_ptr, png_uint_32 flag)); + +/* Returns number of bytes needed to hold a transformed row. */ +PNG_EXPORT(111, size_t, png_get_rowbytes, (png_const_structrp png_ptr, + png_const_inforp info_ptr)); + +#ifdef PNG_INFO_IMAGE_SUPPORTED +/* Returns row_pointers, which is an array of pointers to scanlines that was + * returned from png_read_png(). + */ +PNG_EXPORT(112, png_bytepp, png_get_rows, (png_const_structrp png_ptr, + png_const_inforp info_ptr)); + +/* Set row_pointers, which is an array of pointers to scanlines for use + * by png_write_png(). + */ +PNG_EXPORT(113, void, png_set_rows, (png_const_structrp png_ptr, + png_inforp info_ptr, png_bytepp row_pointers)); +#endif + +/* Returns number of color channels in image. */ +PNG_EXPORT(114, png_byte, png_get_channels, (png_const_structrp png_ptr, + png_const_inforp info_ptr)); + +#ifdef PNG_EASY_ACCESS_SUPPORTED +/* Returns image width in pixels. */ +PNG_EXPORT(115, png_uint_32, png_get_image_width, (png_const_structrp png_ptr, + png_const_inforp info_ptr)); + +/* Returns image height in pixels. */ +PNG_EXPORT(116, png_uint_32, png_get_image_height, (png_const_structrp png_ptr, + png_const_inforp info_ptr)); + +/* Returns image bit_depth. */ +PNG_EXPORT(117, png_byte, png_get_bit_depth, (png_const_structrp png_ptr, + png_const_inforp info_ptr)); + +/* Returns image color_type. */ +PNG_EXPORT(118, png_byte, png_get_color_type, (png_const_structrp png_ptr, + png_const_inforp info_ptr)); + +/* Returns image filter_type. */ +PNG_EXPORT(119, png_byte, png_get_filter_type, (png_const_structrp png_ptr, + png_const_inforp info_ptr)); + +/* Returns image interlace_type. */ +PNG_EXPORT(120, png_byte, png_get_interlace_type, (png_const_structrp png_ptr, + png_const_inforp info_ptr)); + +/* Returns image compression_type. */ +PNG_EXPORT(121, png_byte, png_get_compression_type, (png_const_structrp png_ptr, + png_const_inforp info_ptr)); + +/* Returns image resolution in pixels per meter, from pHYs chunk data. */ +PNG_EXPORT(122, png_uint_32, png_get_pixels_per_meter, + (png_const_structrp png_ptr, png_const_inforp info_ptr)); +PNG_EXPORT(123, png_uint_32, png_get_x_pixels_per_meter, + (png_const_structrp png_ptr, png_const_inforp info_ptr)); +PNG_EXPORT(124, png_uint_32, png_get_y_pixels_per_meter, + (png_const_structrp png_ptr, png_const_inforp info_ptr)); + +/* Returns pixel aspect ratio, computed from pHYs chunk data. */ +PNG_FP_EXPORT(125, float, png_get_pixel_aspect_ratio, + (png_const_structrp png_ptr, png_const_inforp info_ptr)) +PNG_FIXED_EXPORT(210, png_fixed_point, png_get_pixel_aspect_ratio_fixed, + (png_const_structrp png_ptr, png_const_inforp info_ptr)) + +/* Returns image x, y offset in pixels or microns, from oFFs chunk data. */ +PNG_EXPORT(126, png_int_32, png_get_x_offset_pixels, + (png_const_structrp png_ptr, png_const_inforp info_ptr)); +PNG_EXPORT(127, png_int_32, png_get_y_offset_pixels, + (png_const_structrp png_ptr, png_const_inforp info_ptr)); +PNG_EXPORT(128, png_int_32, png_get_x_offset_microns, + (png_const_structrp png_ptr, png_const_inforp info_ptr)); +PNG_EXPORT(129, png_int_32, png_get_y_offset_microns, + (png_const_structrp png_ptr, png_const_inforp info_ptr)); + +#endif /* EASY_ACCESS */ + +#ifdef PNG_READ_SUPPORTED +/* Returns pointer to signature string read from PNG header */ +PNG_EXPORT(130, png_const_bytep, png_get_signature, (png_const_structrp png_ptr, + png_const_inforp info_ptr)); +#endif + +#ifdef PNG_bKGD_SUPPORTED +PNG_EXPORT(131, png_uint_32, png_get_bKGD, (png_const_structrp png_ptr, + png_inforp info_ptr, png_color_16p *background)); +#endif + +#ifdef PNG_bKGD_SUPPORTED +PNG_EXPORT(132, void, png_set_bKGD, (png_const_structrp png_ptr, + png_inforp info_ptr, png_const_color_16p background)); +#endif + +#ifdef PNG_cHRM_SUPPORTED +PNG_FP_EXPORT(133, png_uint_32, png_get_cHRM, (png_const_structrp png_ptr, + png_const_inforp info_ptr, double *white_x, double *white_y, double *red_x, + double *red_y, double *green_x, double *green_y, double *blue_x, + double *blue_y)) +PNG_FP_EXPORT(230, png_uint_32, png_get_cHRM_XYZ, (png_const_structrp png_ptr, + png_const_inforp info_ptr, double *red_X, double *red_Y, double *red_Z, + double *green_X, double *green_Y, double *green_Z, double *blue_X, + double *blue_Y, double *blue_Z)) +PNG_FIXED_EXPORT(134, png_uint_32, png_get_cHRM_fixed, + (png_const_structrp png_ptr, png_const_inforp info_ptr, + png_fixed_point *int_white_x, png_fixed_point *int_white_y, + png_fixed_point *int_red_x, png_fixed_point *int_red_y, + png_fixed_point *int_green_x, png_fixed_point *int_green_y, + png_fixed_point *int_blue_x, png_fixed_point *int_blue_y)) +PNG_FIXED_EXPORT(231, png_uint_32, png_get_cHRM_XYZ_fixed, + (png_const_structrp png_ptr, png_const_inforp info_ptr, + png_fixed_point *int_red_X, png_fixed_point *int_red_Y, + png_fixed_point *int_red_Z, png_fixed_point *int_green_X, + png_fixed_point *int_green_Y, png_fixed_point *int_green_Z, + png_fixed_point *int_blue_X, png_fixed_point *int_blue_Y, + png_fixed_point *int_blue_Z)) +#endif + +#ifdef PNG_cHRM_SUPPORTED +PNG_FP_EXPORT(135, void, png_set_cHRM, (png_const_structrp png_ptr, + png_inforp info_ptr, + double white_x, double white_y, double red_x, double red_y, double green_x, + double green_y, double blue_x, double blue_y)) +PNG_FP_EXPORT(232, void, png_set_cHRM_XYZ, (png_const_structrp png_ptr, + png_inforp info_ptr, double red_X, double red_Y, double red_Z, + double green_X, double green_Y, double green_Z, double blue_X, + double blue_Y, double blue_Z)) +PNG_FIXED_EXPORT(136, void, png_set_cHRM_fixed, (png_const_structrp png_ptr, + png_inforp info_ptr, png_fixed_point int_white_x, + png_fixed_point int_white_y, png_fixed_point int_red_x, + png_fixed_point int_red_y, png_fixed_point int_green_x, + png_fixed_point int_green_y, png_fixed_point int_blue_x, + png_fixed_point int_blue_y)) +PNG_FIXED_EXPORT(233, void, png_set_cHRM_XYZ_fixed, (png_const_structrp png_ptr, + png_inforp info_ptr, png_fixed_point int_red_X, png_fixed_point int_red_Y, + png_fixed_point int_red_Z, png_fixed_point int_green_X, + png_fixed_point int_green_Y, png_fixed_point int_green_Z, + png_fixed_point int_blue_X, png_fixed_point int_blue_Y, + png_fixed_point int_blue_Z)) +#endif + +#ifdef PNG_cICP_SUPPORTED +PNG_EXPORT(250, png_uint_32, png_get_cICP, (png_const_structrp png_ptr, + png_const_inforp info_ptr, png_bytep colour_primaries, + png_bytep transfer_function, png_bytep matrix_coefficients, + png_bytep video_full_range_flag)); +#endif + +#ifdef PNG_cICP_SUPPORTED +PNG_EXPORT(251, void, png_set_cICP, (png_const_structrp png_ptr, + png_inforp info_ptr, png_byte colour_primaries, + png_byte transfer_function, png_byte matrix_coefficients, + png_byte video_full_range_flag)); +#endif + +#ifdef PNG_cLLI_SUPPORTED +PNG_FP_EXPORT(252, png_uint_32, png_get_cLLI, (png_const_structrp png_ptr, + png_const_inforp info_ptr, double *maximum_content_light_level, + double *maximum_frame_average_light_level)) +PNG_FIXED_EXPORT(253, png_uint_32, png_get_cLLI_fixed, + (png_const_structrp png_ptr, png_const_inforp info_ptr, + /* The values below are in cd/m2 (nits) and are scaled by 10,000; not + * 100,000 as in the case of png_fixed_point. + */ + png_uint_32p maximum_content_light_level_scaled_by_10000, + png_uint_32p maximum_frame_average_light_level_scaled_by_10000)) +#endif + +#ifdef PNG_cLLI_SUPPORTED +PNG_FP_EXPORT(254, void, png_set_cLLI, (png_const_structrp png_ptr, + png_inforp info_ptr, double maximum_content_light_level, + double maximum_frame_average_light_level)) +PNG_FIXED_EXPORT(255, void, png_set_cLLI_fixed, (png_const_structrp png_ptr, + png_inforp info_ptr, + /* The values below are in cd/m2 (nits) and are scaled by 10,000; not + * 100,000 as in the case of png_fixed_point. + */ + png_uint_32 maximum_content_light_level_scaled_by_10000, + png_uint_32 maximum_frame_average_light_level_scaled_by_10000)) +#endif + +#ifdef PNG_eXIf_SUPPORTED +PNG_EXPORT(246, png_uint_32, png_get_eXIf, (png_const_structrp png_ptr, + png_inforp info_ptr, png_bytep *exif)); +PNG_EXPORT(247, void, png_set_eXIf, (png_const_structrp png_ptr, + png_inforp info_ptr, png_bytep exif)); + +PNG_EXPORT(248, png_uint_32, png_get_eXIf_1, (png_const_structrp png_ptr, + png_const_inforp info_ptr, png_uint_32 *num_exif, png_bytep *exif)); +PNG_EXPORT(249, void, png_set_eXIf_1, (png_const_structrp png_ptr, + png_inforp info_ptr, png_uint_32 num_exif, png_bytep exif)); +#endif + +#ifdef PNG_gAMA_SUPPORTED +PNG_FP_EXPORT(137, png_uint_32, png_get_gAMA, (png_const_structrp png_ptr, + png_const_inforp info_ptr, double *file_gamma)) +PNG_FIXED_EXPORT(138, png_uint_32, png_get_gAMA_fixed, + (png_const_structrp png_ptr, png_const_inforp info_ptr, + png_fixed_point *int_file_gamma)) +#endif + +#ifdef PNG_gAMA_SUPPORTED +PNG_FP_EXPORT(139, void, png_set_gAMA, (png_const_structrp png_ptr, + png_inforp info_ptr, double file_gamma)) +PNG_FIXED_EXPORT(140, void, png_set_gAMA_fixed, (png_const_structrp png_ptr, + png_inforp info_ptr, png_fixed_point int_file_gamma)) +#endif + +#ifdef PNG_hIST_SUPPORTED +PNG_EXPORT(141, png_uint_32, png_get_hIST, (png_const_structrp png_ptr, + png_inforp info_ptr, png_uint_16p *hist)); +PNG_EXPORT(142, void, png_set_hIST, (png_const_structrp png_ptr, + png_inforp info_ptr, png_const_uint_16p hist)); +#endif + +PNG_EXPORT(143, png_uint_32, png_get_IHDR, (png_const_structrp png_ptr, + png_const_inforp info_ptr, png_uint_32 *width, png_uint_32 *height, + int *bit_depth, int *color_type, int *interlace_method, + int *compression_method, int *filter_method)); + +PNG_EXPORT(144, void, png_set_IHDR, (png_const_structrp png_ptr, + png_inforp info_ptr, png_uint_32 width, png_uint_32 height, int bit_depth, + int color_type, int interlace_method, int compression_method, + int filter_method)); + +#ifdef PNG_mDCV_SUPPORTED +PNG_FP_EXPORT(256, png_uint_32, png_get_mDCV, (png_const_structrp png_ptr, + png_const_inforp info_ptr, + /* The chromaticities of the mastering display. As cHRM, but independent of + * the encoding endpoints in cHRM, or cICP, or iCCP. These values will + * always be in the range 0 to 1.3107. + */ + double *white_x, double *white_y, double *red_x, double *red_y, + double *green_x, double *green_y, double *blue_x, double *blue_y, + /* Mastering display luminance in cd/m2 (nits). */ + double *mastering_display_maximum_luminance, + double *mastering_display_minimum_luminance)) + +PNG_FIXED_EXPORT(257, png_uint_32, png_get_mDCV_fixed, + (png_const_structrp png_ptr, png_const_inforp info_ptr, + png_fixed_point *int_white_x, png_fixed_point *int_white_y, + png_fixed_point *int_red_x, png_fixed_point *int_red_y, + png_fixed_point *int_green_x, png_fixed_point *int_green_y, + png_fixed_point *int_blue_x, png_fixed_point *int_blue_y, + /* Mastering display luminance in cd/m2 (nits) multiplied (scaled) by + * 10,000. + */ + png_uint_32p mastering_display_maximum_luminance_scaled_by_10000, + png_uint_32p mastering_display_minimum_luminance_scaled_by_10000)) +#endif + +#ifdef PNG_mDCV_SUPPORTED +PNG_FP_EXPORT(258, void, png_set_mDCV, (png_const_structrp png_ptr, + png_inforp info_ptr, + /* The chromaticities of the mastering display. As cHRM, but independent of + * the encoding endpoints in cHRM, or cICP, or iCCP. + */ + double white_x, double white_y, double red_x, double red_y, double green_x, + double green_y, double blue_x, double blue_y, + /* Mastering display luminance in cd/m2 (nits). */ + double mastering_display_maximum_luminance, + double mastering_display_minimum_luminance)) + +PNG_FIXED_EXPORT(259, void, png_set_mDCV_fixed, (png_const_structrp png_ptr, + png_inforp info_ptr, + /* The admissible range of these values is not the full range of a PNG + * fixed point value. Negative values cannot be encoded and the maximum + * value is about 1.3 */ + png_fixed_point int_white_x, png_fixed_point int_white_y, + png_fixed_point int_red_x, png_fixed_point int_red_y, + png_fixed_point int_green_x, png_fixed_point int_green_y, + png_fixed_point int_blue_x, png_fixed_point int_blue_y, + /* These are PNG unsigned 4 byte values: 31-bit unsigned values. The MSB + * must be zero. + */ + png_uint_32 mastering_display_maximum_luminance_scaled_by_10000, + png_uint_32 mastering_display_minimum_luminance_scaled_by_10000)) +#endif + +#ifdef PNG_oFFs_SUPPORTED +PNG_EXPORT(145, png_uint_32, png_get_oFFs, (png_const_structrp png_ptr, + png_const_inforp info_ptr, png_int_32 *offset_x, png_int_32 *offset_y, + int *unit_type)); +#endif + +#ifdef PNG_oFFs_SUPPORTED +PNG_EXPORT(146, void, png_set_oFFs, (png_const_structrp png_ptr, + png_inforp info_ptr, png_int_32 offset_x, png_int_32 offset_y, + int unit_type)); +#endif + +#ifdef PNG_pCAL_SUPPORTED +PNG_EXPORT(147, png_uint_32, png_get_pCAL, (png_const_structrp png_ptr, + png_inforp info_ptr, png_charp *purpose, png_int_32 *X0, + png_int_32 *X1, int *type, int *nparams, png_charp *units, + png_charpp *params)); +#endif + +#ifdef PNG_pCAL_SUPPORTED +PNG_EXPORT(148, void, png_set_pCAL, (png_const_structrp png_ptr, + png_inforp info_ptr, png_const_charp purpose, png_int_32 X0, png_int_32 X1, + int type, int nparams, png_const_charp units, png_charpp params)); +#endif + +#ifdef PNG_pHYs_SUPPORTED +PNG_EXPORT(149, png_uint_32, png_get_pHYs, (png_const_structrp png_ptr, + png_const_inforp info_ptr, png_uint_32 *res_x, png_uint_32 *res_y, + int *unit_type)); +#endif + +#ifdef PNG_pHYs_SUPPORTED +PNG_EXPORT(150, void, png_set_pHYs, (png_const_structrp png_ptr, + png_inforp info_ptr, png_uint_32 res_x, png_uint_32 res_y, int unit_type)); +#endif + +PNG_EXPORT(151, png_uint_32, png_get_PLTE, (png_const_structrp png_ptr, + png_inforp info_ptr, png_colorp *palette, int *num_palette)); + +PNG_EXPORT(152, void, png_set_PLTE, (png_structrp png_ptr, + png_inforp info_ptr, png_const_colorp palette, int num_palette)); + +#ifdef PNG_sBIT_SUPPORTED +PNG_EXPORT(153, png_uint_32, png_get_sBIT, (png_const_structrp png_ptr, + png_inforp info_ptr, png_color_8p *sig_bit)); +#endif + +#ifdef PNG_sBIT_SUPPORTED +PNG_EXPORT(154, void, png_set_sBIT, (png_const_structrp png_ptr, + png_inforp info_ptr, png_const_color_8p sig_bit)); +#endif + +#ifdef PNG_sRGB_SUPPORTED +PNG_EXPORT(155, png_uint_32, png_get_sRGB, (png_const_structrp png_ptr, + png_const_inforp info_ptr, int *file_srgb_intent)); +#endif + +#ifdef PNG_sRGB_SUPPORTED +PNG_EXPORT(156, void, png_set_sRGB, (png_const_structrp png_ptr, + png_inforp info_ptr, int srgb_intent)); +PNG_EXPORT(157, void, png_set_sRGB_gAMA_and_cHRM, (png_const_structrp png_ptr, + png_inforp info_ptr, int srgb_intent)); +#endif + +#ifdef PNG_iCCP_SUPPORTED +PNG_EXPORT(158, png_uint_32, png_get_iCCP, (png_const_structrp png_ptr, + png_inforp info_ptr, png_charpp name, int *compression_type, + png_bytepp profile, png_uint_32 *proflen)); +#endif + +#ifdef PNG_iCCP_SUPPORTED +PNG_EXPORT(159, void, png_set_iCCP, (png_const_structrp png_ptr, + png_inforp info_ptr, png_const_charp name, int compression_type, + png_const_bytep profile, png_uint_32 proflen)); +#endif + +#ifdef PNG_sPLT_SUPPORTED +PNG_EXPORT(160, int, png_get_sPLT, (png_const_structrp png_ptr, + png_inforp info_ptr, png_sPLT_tpp entries)); +#endif + +#ifdef PNG_sPLT_SUPPORTED +PNG_EXPORT(161, void, png_set_sPLT, (png_const_structrp png_ptr, + png_inforp info_ptr, png_const_sPLT_tp entries, int nentries)); +#endif + +#ifdef PNG_TEXT_SUPPORTED +/* png_get_text also returns the number of text chunks in *num_text */ +PNG_EXPORT(162, int, png_get_text, (png_const_structrp png_ptr, + png_inforp info_ptr, png_textp *text_ptr, int *num_text)); +#endif + +/* Note while png_set_text() will accept a structure whose text, + * language, and translated keywords are NULL pointers, the structure + * returned by png_get_text will always contain regular + * zero-terminated C strings. They might be empty strings but + * they will never be NULL pointers. + */ + +#ifdef PNG_TEXT_SUPPORTED +PNG_EXPORT(163, void, png_set_text, (png_const_structrp png_ptr, + png_inforp info_ptr, png_const_textp text_ptr, int num_text)); +#endif + +#ifdef PNG_tIME_SUPPORTED +PNG_EXPORT(164, png_uint_32, png_get_tIME, (png_const_structrp png_ptr, + png_inforp info_ptr, png_timep *mod_time)); +#endif + +#ifdef PNG_tIME_SUPPORTED +PNG_EXPORT(165, void, png_set_tIME, (png_const_structrp png_ptr, + png_inforp info_ptr, png_const_timep mod_time)); +#endif + +#ifdef PNG_tRNS_SUPPORTED +PNG_EXPORT(166, png_uint_32, png_get_tRNS, (png_const_structrp png_ptr, + png_inforp info_ptr, png_bytep *trans_alpha, int *num_trans, + png_color_16p *trans_color)); +#endif + +#ifdef PNG_tRNS_SUPPORTED +PNG_EXPORT(167, void, png_set_tRNS, (png_structrp png_ptr, + png_inforp info_ptr, png_const_bytep trans_alpha, int num_trans, + png_const_color_16p trans_color)); +#endif + +#ifdef PNG_sCAL_SUPPORTED +PNG_FP_EXPORT(168, png_uint_32, png_get_sCAL, (png_const_structrp png_ptr, + png_const_inforp info_ptr, int *unit, double *width, double *height)) +#if defined(PNG_FLOATING_ARITHMETIC_SUPPORTED) || \ + defined(PNG_FLOATING_POINT_SUPPORTED) +/* NOTE: this API is currently implemented using floating point arithmetic, + * consequently it can only be used on systems with floating point support. + * In any case the range of values supported by png_fixed_point is small and it + * is highly recommended that png_get_sCAL_s be used instead. + */ +PNG_FIXED_EXPORT(214, png_uint_32, png_get_sCAL_fixed, + (png_const_structrp png_ptr, png_const_inforp info_ptr, int *unit, + png_fixed_point *width, png_fixed_point *height)) +#endif +PNG_EXPORT(169, png_uint_32, png_get_sCAL_s, + (png_const_structrp png_ptr, png_const_inforp info_ptr, int *unit, + png_charpp swidth, png_charpp sheight)); + +PNG_FP_EXPORT(170, void, png_set_sCAL, (png_const_structrp png_ptr, + png_inforp info_ptr, int unit, double width, double height)) +PNG_FIXED_EXPORT(213, void, png_set_sCAL_fixed, (png_const_structrp png_ptr, + png_inforp info_ptr, int unit, png_fixed_point width, + png_fixed_point height)) +PNG_EXPORT(171, void, png_set_sCAL_s, (png_const_structrp png_ptr, + png_inforp info_ptr, int unit, + png_const_charp swidth, png_const_charp sheight)); +#endif /* sCAL */ + +#ifdef PNG_SET_UNKNOWN_CHUNKS_SUPPORTED +/* Provide the default handling for all unknown chunks or, optionally, for + * specific unknown chunks. + * + * NOTE: prior to 1.6.0 the handling specified for particular chunks on read was + * ignored and the default was used, the per-chunk setting only had an effect on + * write. If you wish to have chunk-specific handling on read in code that must + * work on earlier versions you must use a user chunk callback to specify the + * desired handling (keep or discard.) + * + * The 'keep' parameter is a PNG_HANDLE_CHUNK_ value as listed below. The + * parameter is interpreted as follows: + * + * READ: + * PNG_HANDLE_CHUNK_AS_DEFAULT: + * Known chunks: do normal libpng processing, do not keep the chunk (but + * see the comments below about PNG_HANDLE_AS_UNKNOWN_SUPPORTED) + * Unknown chunks: for a specific chunk use the global default, when used + * as the default discard the chunk data. + * PNG_HANDLE_CHUNK_NEVER: + * Discard the chunk data. + * PNG_HANDLE_CHUNK_IF_SAFE: + * Keep the chunk data if the chunk is not critical else raise a chunk + * error. + * PNG_HANDLE_CHUNK_ALWAYS: + * Keep the chunk data. + * + * If the chunk data is saved it can be retrieved using png_get_unknown_chunks, + * below. Notice that specifying "AS_DEFAULT" as a global default is equivalent + * to specifying "NEVER", however when "AS_DEFAULT" is used for specific chunks + * it simply resets the behavior to the libpng default. + * + * INTERACTION WITH USER CHUNK CALLBACKS: + * The per-chunk handling is always used when there is a png_user_chunk_ptr + * callback and the callback returns 0; the chunk is then always stored *unless* + * it is critical and the per-chunk setting is other than ALWAYS. Notice that + * the global default is *not* used in this case. (In effect the per-chunk + * value is incremented to at least IF_SAFE.) + * + * IMPORTANT NOTE: this behavior will change in libpng 1.7 - the global and + * per-chunk defaults will be honored. If you want to preserve the current + * behavior when your callback returns 0 you must set PNG_HANDLE_CHUNK_IF_SAFE + * as the default - if you don't do this libpng 1.6 will issue a warning. + * + * If you want unhandled unknown chunks to be discarded in libpng 1.6 and + * earlier simply return '1' (handled). + * + * PNG_HANDLE_AS_UNKNOWN_SUPPORTED: + * If this is *not* set known chunks will always be handled by libpng and + * will never be stored in the unknown chunk list. Known chunks listed to + * png_set_keep_unknown_chunks will have no effect. If it is set then known + * chunks listed with a keep other than AS_DEFAULT will *never* be processed + * by libpng, in addition critical chunks must either be processed by the + * callback or saved. + * + * The IHDR and IEND chunks must not be listed. Because this turns off the + * default handling for chunks that would otherwise be recognized the + * behavior of libpng transformations may well become incorrect! + * + * WRITE: + * When writing chunks the options only apply to the chunks specified by + * png_set_unknown_chunks (below), libpng will *always* write known chunks + * required by png_set_ calls and will always write the core critical chunks + * (as required for PLTE). + * + * Each chunk in the png_set_unknown_chunks list is looked up in the + * png_set_keep_unknown_chunks list to find the keep setting, this is then + * interpreted as follows: + * + * PNG_HANDLE_CHUNK_AS_DEFAULT: + * Write safe-to-copy chunks and write other chunks if the global + * default is set to _ALWAYS, otherwise don't write this chunk. + * PNG_HANDLE_CHUNK_NEVER: + * Do not write the chunk. + * PNG_HANDLE_CHUNK_IF_SAFE: + * Write the chunk if it is safe-to-copy, otherwise do not write it. + * PNG_HANDLE_CHUNK_ALWAYS: + * Write the chunk. + * + * Note that the default behavior is effectively the opposite of the read case - + * in read unknown chunks are not stored by default, in write they are written + * by default. Also the behavior of PNG_HANDLE_CHUNK_IF_SAFE is very different + * - on write the safe-to-copy bit is checked, on read the critical bit is + * checked and on read if the chunk is critical an error will be raised. + * + * num_chunks: + * =========== + * If num_chunks is positive, then the "keep" parameter specifies the manner + * for handling only those chunks appearing in the chunk_list array, + * otherwise the chunk list array is ignored. + * + * If num_chunks is 0 the "keep" parameter specifies the default behavior for + * unknown chunks, as described above. + * + * If num_chunks is negative, then the "keep" parameter specifies the manner + * for handling all unknown chunks plus all chunks recognized by libpng + * except for the IHDR, PLTE, tRNS, IDAT, and IEND chunks (which continue to + * be processed by libpng. + */ +#ifdef PNG_HANDLE_AS_UNKNOWN_SUPPORTED +PNG_EXPORT(172, void, png_set_keep_unknown_chunks, (png_structrp png_ptr, + int keep, png_const_bytep chunk_list, int num_chunks)); +#endif /* HANDLE_AS_UNKNOWN */ + +/* The "keep" PNG_HANDLE_CHUNK_ parameter for the specified chunk is returned; + * the result is therefore true (non-zero) if special handling is required, + * false for the default handling. + */ +PNG_EXPORT(173, int, png_handle_as_unknown, (png_const_structrp png_ptr, + png_const_bytep chunk_name)); +#endif /* SET_UNKNOWN_CHUNKS */ + +#ifdef PNG_STORE_UNKNOWN_CHUNKS_SUPPORTED +PNG_EXPORT(174, void, png_set_unknown_chunks, (png_const_structrp png_ptr, + png_inforp info_ptr, png_const_unknown_chunkp unknowns, + int num_unknowns)); + /* NOTE: prior to 1.6.0 this routine set the 'location' field of the added + * unknowns to the location currently stored in the png_struct. This is + * invariably the wrong value on write. To fix this call the following API + * for each chunk in the list with the correct location. If you know your + * code won't be compiled on earlier versions you can rely on + * png_set_unknown_chunks(write-ptr, png_get_unknown_chunks(read-ptr)) doing + * the correct thing. + */ + +PNG_EXPORT(175, void, png_set_unknown_chunk_location, + (png_const_structrp png_ptr, png_inforp info_ptr, int chunk, int location)); + +PNG_EXPORT(176, int, png_get_unknown_chunks, (png_const_structrp png_ptr, + png_inforp info_ptr, png_unknown_chunkpp entries)); +#endif + +/* Png_free_data() will turn off the "valid" flag for anything it frees. + * If you need to turn it off for a chunk that your application has freed, + * you can use png_set_invalid(png_ptr, info_ptr, PNG_INFO_CHNK); + */ +PNG_EXPORT(177, void, png_set_invalid, (png_const_structrp png_ptr, + png_inforp info_ptr, int mask)); + +#ifdef PNG_INFO_IMAGE_SUPPORTED +/* The "params" pointer is currently not used and is for future expansion. */ +#ifdef PNG_SEQUENTIAL_READ_SUPPORTED +PNG_EXPORT(178, void, png_read_png, (png_structrp png_ptr, png_inforp info_ptr, + int transforms, png_voidp params)); +#endif +#ifdef PNG_WRITE_SUPPORTED +PNG_EXPORT(179, void, png_write_png, (png_structrp png_ptr, png_inforp info_ptr, + int transforms, png_voidp params)); +#endif +#endif + +PNG_EXPORT(180, png_const_charp, png_get_copyright, + (png_const_structrp png_ptr)); +PNG_EXPORT(181, png_const_charp, png_get_header_ver, + (png_const_structrp png_ptr)); +PNG_EXPORT(182, png_const_charp, png_get_header_version, + (png_const_structrp png_ptr)); +PNG_EXPORT(183, png_const_charp, png_get_libpng_ver, + (png_const_structrp png_ptr)); + +#ifdef PNG_MNG_FEATURES_SUPPORTED +PNG_EXPORT(184, png_uint_32, png_permit_mng_features, (png_structrp png_ptr, + png_uint_32 mng_features_permitted)); +#endif + +/* For use in png_set_keep_unknown, added to version 1.2.6 */ +#define PNG_HANDLE_CHUNK_AS_DEFAULT 0 +#define PNG_HANDLE_CHUNK_NEVER 1 +#define PNG_HANDLE_CHUNK_IF_SAFE 2 +#define PNG_HANDLE_CHUNK_ALWAYS 3 +#define PNG_HANDLE_CHUNK_LAST 4 + +/* Strip the prepended error numbers ("#nnn ") from error and warning + * messages before passing them to the error or warning handler. + */ +#ifdef PNG_ERROR_NUMBERS_SUPPORTED +PNG_EXPORT(185, void, png_set_strip_error_numbers, (png_structrp png_ptr, + png_uint_32 strip_mode)); +#endif + +/* Added in libpng-1.2.6 */ +#ifdef PNG_SET_USER_LIMITS_SUPPORTED +PNG_EXPORT(186, void, png_set_user_limits, (png_structrp png_ptr, + png_uint_32 user_width_max, png_uint_32 user_height_max)); +PNG_EXPORT(187, png_uint_32, png_get_user_width_max, + (png_const_structrp png_ptr)); +PNG_EXPORT(188, png_uint_32, png_get_user_height_max, + (png_const_structrp png_ptr)); +/* Added in libpng-1.4.0 */ +PNG_EXPORT(189, void, png_set_chunk_cache_max, (png_structrp png_ptr, + png_uint_32 user_chunk_cache_max)); +PNG_EXPORT(190, png_uint_32, png_get_chunk_cache_max, + (png_const_structrp png_ptr)); +/* Added in libpng-1.4.1 */ +PNG_EXPORT(191, void, png_set_chunk_malloc_max, (png_structrp png_ptr, + png_alloc_size_t user_chunk_cache_max)); +PNG_EXPORT(192, png_alloc_size_t, png_get_chunk_malloc_max, + (png_const_structrp png_ptr)); +#endif + +#if defined(PNG_INCH_CONVERSIONS_SUPPORTED) +PNG_EXPORT(193, png_uint_32, png_get_pixels_per_inch, + (png_const_structrp png_ptr, png_const_inforp info_ptr)); + +PNG_EXPORT(194, png_uint_32, png_get_x_pixels_per_inch, + (png_const_structrp png_ptr, png_const_inforp info_ptr)); + +PNG_EXPORT(195, png_uint_32, png_get_y_pixels_per_inch, + (png_const_structrp png_ptr, png_const_inforp info_ptr)); + +PNG_FP_EXPORT(196, float, png_get_x_offset_inches, + (png_const_structrp png_ptr, png_const_inforp info_ptr)) +#ifdef PNG_FIXED_POINT_SUPPORTED /* otherwise not implemented. */ +PNG_FIXED_EXPORT(211, png_fixed_point, png_get_x_offset_inches_fixed, + (png_const_structrp png_ptr, png_const_inforp info_ptr)) +#endif + +PNG_FP_EXPORT(197, float, png_get_y_offset_inches, (png_const_structrp png_ptr, + png_const_inforp info_ptr)) +#ifdef PNG_FIXED_POINT_SUPPORTED /* otherwise not implemented. */ +PNG_FIXED_EXPORT(212, png_fixed_point, png_get_y_offset_inches_fixed, + (png_const_structrp png_ptr, png_const_inforp info_ptr)) +#endif + +# ifdef PNG_pHYs_SUPPORTED +PNG_EXPORT(198, png_uint_32, png_get_pHYs_dpi, (png_const_structrp png_ptr, + png_const_inforp info_ptr, png_uint_32 *res_x, png_uint_32 *res_y, + int *unit_type)); +# endif /* pHYs */ +#endif /* INCH_CONVERSIONS */ + +/* Added in libpng-1.4.0 */ +#ifdef PNG_IO_STATE_SUPPORTED +PNG_EXPORT(199, png_uint_32, png_get_io_state, (png_const_structrp png_ptr)); + +/* Removed from libpng 1.6; use png_get_io_chunk_type. */ +PNG_REMOVED(200, png_const_bytep, png_get_io_chunk_name, (png_structrp png_ptr), + PNG_DEPRECATED) + +PNG_EXPORT(216, png_uint_32, png_get_io_chunk_type, + (png_const_structrp png_ptr)); + +/* The flags returned by png_get_io_state() are the following: */ +# define PNG_IO_NONE 0x0000 /* no I/O at this moment */ +# define PNG_IO_READING 0x0001 /* currently reading */ +# define PNG_IO_WRITING 0x0002 /* currently writing */ +# define PNG_IO_SIGNATURE 0x0010 /* currently at the file signature */ +# define PNG_IO_CHUNK_HDR 0x0020 /* currently at the chunk header */ +# define PNG_IO_CHUNK_DATA 0x0040 /* currently at the chunk data */ +# define PNG_IO_CHUNK_CRC 0x0080 /* currently at the chunk crc */ +# define PNG_IO_MASK_OP 0x000f /* current operation: reading/writing */ +# define PNG_IO_MASK_LOC 0x00f0 /* current location: sig/hdr/data/crc */ +#endif /* IO_STATE */ + +/* Interlace support. The following macros are always defined so that if + * libpng interlace handling is turned off the macros may be used to handle + * interlaced images within the application. + */ +#define PNG_INTERLACE_ADAM7_PASSES 7 + +/* Two macros to return the first row and first column of the original, + * full, image which appears in a given pass. 'pass' is in the range 0 + * to 6 and the result is in the range 0 to 7. + */ +#define PNG_PASS_START_ROW(pass) (((1&~(pass))<<(3-((pass)>>1)))&7) +#define PNG_PASS_START_COL(pass) (((1& (pass))<<(3-(((pass)+1)>>1)))&7) + +/* A macro to return the offset between pixels in the output row for a pair of + * pixels in the input - effectively the inverse of the 'COL_SHIFT' macro that + * follows. Note that ROW_OFFSET is the offset from one row to the next whereas + * COL_OFFSET is from one column to the next, within a row. + */ +#define PNG_PASS_ROW_OFFSET(pass) ((pass)>2?(8>>(((pass)-1)>>1)):8) +#define PNG_PASS_COL_OFFSET(pass) (1<<((7-(pass))>>1)) + +/* Two macros to help evaluate the number of rows or columns in each + * pass. This is expressed as a shift - effectively log2 of the number or + * rows or columns in each 8x8 tile of the original image. + */ +#define PNG_PASS_ROW_SHIFT(pass) ((pass)>2?(8-(pass))>>1:3) +#define PNG_PASS_COL_SHIFT(pass) ((pass)>1?(7-(pass))>>1:3) + +/* Hence two macros to determine the number of rows or columns in a given + * pass of an image given its height or width. In fact these macros may + * return non-zero even though the sub-image is empty, because the other + * dimension may be empty for a small image. + */ +#define PNG_PASS_ROWS(height, pass) (((height)+(((1<>PNG_PASS_ROW_SHIFT(pass)) +#define PNG_PASS_COLS(width, pass) (((width)+(((1<>PNG_PASS_COL_SHIFT(pass)) + +/* For the reader row callbacks (both progressive and sequential) it is + * necessary to find the row in the output image given a row in an interlaced + * image, so two more macros: + */ +#define PNG_ROW_FROM_PASS_ROW(y_in, pass) \ + (((y_in)<>(((7-(off))-(pass))<<2)) & 0xF) | \ + ((0x01145AF0>>(((7-(off))-(pass))<<2)) & 0xF0)) + +#define PNG_ROW_IN_INTERLACE_PASS(y, pass) \ + ((PNG_PASS_MASK(pass,0) >> ((y)&7)) & 1) +#define PNG_COL_IN_INTERLACE_PASS(x, pass) \ + ((PNG_PASS_MASK(pass,1) >> ((x)&7)) & 1) + +#ifdef PNG_READ_COMPOSITE_NODIV_SUPPORTED +/* With these routines we avoid an integer divide, which will be slower on + * most machines. However, it does take more operations than the corresponding + * divide method, so it may be slower on a few RISC systems. There are two + * shifts (by 8 or 16 bits) and an addition, versus a single integer divide. + * + * Note that the rounding factors are NOT supposed to be the same! 128 and + * 32768 are correct for the NODIV code; 127 and 32767 are correct for the + * standard method. + * + * [Optimized code by Greg Roelofs and Mark Adler...blame us for bugs. :-) ] + */ + + /* fg and bg should be in `gamma 1.0' space; alpha is the opacity */ + +# define png_composite(composite, fg, alpha, bg) \ + { \ + png_uint_16 temp = (png_uint_16)((png_uint_16)(fg) \ + * (png_uint_16)(alpha) \ + + (png_uint_16)(bg)*(png_uint_16)(255 \ + - (png_uint_16)(alpha)) + 128); \ + (composite) = (png_byte)(((temp + (temp >> 8)) >> 8) & 0xff); \ + } + +# define png_composite_16(composite, fg, alpha, bg) \ + { \ + png_uint_32 temp = (png_uint_32)((png_uint_32)(fg) \ + * (png_uint_32)(alpha) \ + + (png_uint_32)(bg)*(65535 \ + - (png_uint_32)(alpha)) + 32768); \ + (composite) = (png_uint_16)(0xffff & ((temp + (temp >> 16)) >> 16)); \ + } + +#else /* Standard method using integer division */ + +# define png_composite(composite, fg, alpha, bg) \ + (composite) = \ + (png_byte)(0xff & (((png_uint_16)(fg) * (png_uint_16)(alpha) + \ + (png_uint_16)(bg) * (png_uint_16)(255 - (png_uint_16)(alpha)) + \ + 127) / 255)) + +# define png_composite_16(composite, fg, alpha, bg) \ + (composite) = \ + (png_uint_16)(0xffff & (((png_uint_32)(fg) * (png_uint_32)(alpha) + \ + (png_uint_32)(bg)*(png_uint_32)(65535 - (png_uint_32)(alpha)) + \ + 32767) / 65535)) +#endif /* READ_COMPOSITE_NODIV */ + +#ifdef PNG_READ_INT_FUNCTIONS_SUPPORTED +PNG_EXPORT(201, png_uint_32, png_get_uint_32, (png_const_bytep buf)); +PNG_EXPORT(202, png_uint_16, png_get_uint_16, (png_const_bytep buf)); +PNG_EXPORT(203, png_int_32, png_get_int_32, (png_const_bytep buf)); +#endif + +PNG_EXPORT(204, png_uint_32, png_get_uint_31, (png_const_structrp png_ptr, + png_const_bytep buf)); +/* No png_get_int_16 -- may be added if there's a real need for it. */ + +/* Place a 32-bit number into a buffer in PNG byte order (big-endian). */ +#ifdef PNG_WRITE_INT_FUNCTIONS_SUPPORTED +PNG_EXPORT(205, void, png_save_uint_32, (png_bytep buf, png_uint_32 i)); +#endif +#ifdef PNG_SAVE_INT_32_SUPPORTED +PNG_EXPORT(206, void, png_save_int_32, (png_bytep buf, png_int_32 i)); +#endif + +/* Place a 16-bit number into a buffer in PNG byte order. + * The parameter is declared unsigned int, not png_uint_16, + * just to avoid potential problems on pre-ANSI C compilers. + */ +#ifdef PNG_WRITE_INT_FUNCTIONS_SUPPORTED +PNG_EXPORT(207, void, png_save_uint_16, (png_bytep buf, unsigned int i)); +/* No png_save_int_16 -- may be added if there's a real need for it. */ +#endif + +#ifdef PNG_USE_READ_MACROS +/* Inline macros to do direct reads of bytes from the input buffer. + * The png_get_int_32() routine assumes we are using two's complement + * format for negative values, which is almost certainly true. + */ +# define PNG_get_uint_32(buf) \ + (((png_uint_32)(*(buf)) << 24) + \ + ((png_uint_32)(*((buf) + 1)) << 16) + \ + ((png_uint_32)(*((buf) + 2)) << 8) + \ + ((png_uint_32)(*((buf) + 3)))) + + /* From libpng-1.4.0 until 1.4.4, the png_get_uint_16 macro (but not the + * function) incorrectly returned a value of type png_uint_32. + */ +# define PNG_get_uint_16(buf) \ + ((png_uint_16) \ + (((unsigned int)(*(buf)) << 8) + \ + ((unsigned int)(*((buf) + 1))))) + +# define PNG_get_int_32(buf) \ + ((png_int_32)((*(buf) & 0x80) \ + ? -((png_int_32)(((png_get_uint_32(buf)^0xffffffffU)+1U)&0x7fffffffU)) \ + : (png_int_32)png_get_uint_32(buf))) + +/* If PNG_PREFIX is defined the same thing as below happens in pnglibconf.h, + * but defining a macro name prefixed with PNG_PREFIX. + */ +# ifndef PNG_PREFIX +# define png_get_uint_32(buf) PNG_get_uint_32(buf) +# define png_get_uint_16(buf) PNG_get_uint_16(buf) +# define png_get_int_32(buf) PNG_get_int_32(buf) +# endif +#else +# ifdef PNG_PREFIX + /* No macros; revert to the (redefined) function */ +# define PNG_get_uint_32 (png_get_uint_32) +# define PNG_get_uint_16 (png_get_uint_16) +# define PNG_get_int_32 (png_get_int_32) +# endif +#endif + +#ifdef PNG_CHECK_FOR_INVALID_INDEX_SUPPORTED +PNG_EXPORT(242, void, png_set_check_for_invalid_index, + (png_structrp png_ptr, int allowed)); +# ifdef PNG_GET_PALETTE_MAX_SUPPORTED +PNG_EXPORT(243, int, png_get_palette_max, (png_const_structp png_ptr, + png_const_infop info_ptr)); +# endif +#endif /* CHECK_FOR_INVALID_INDEX */ + +/******************************************************************************* + * Section 5: SIMPLIFIED API + ******************************************************************************* + * + * Please read the documentation in libpng-manual.txt (TODO: write said + * documentation) if you don't understand what follows. + * + * The simplified API hides the details of both libpng and the PNG file format + * itself. It allows PNG files to be read into a very limited number of + * in-memory bitmap formats or to be written from the same formats. If these + * formats do not accommodate your needs then you can, and should, use the more + * sophisticated APIs above - these support a wide variety of in-memory formats + * and a wide variety of sophisticated transformations to those formats as well + * as a wide variety of APIs to manipulate ancillary information. + * + * To read a PNG file using the simplified API: + * + * 1) Declare a 'png_image' structure (see below) on the stack, set the + * version field to PNG_IMAGE_VERSION and the 'opaque' pointer to NULL + * (this is REQUIRED, your program may crash if you don't do it.) + * 2) Call the appropriate png_image_begin_read... function. + * 3) Set the png_image 'format' member to the required sample format. + * 4) Allocate a buffer for the image and, if required, the color-map. + * 5) Call png_image_finish_read to read the image and, if required, the + * color-map into your buffers. + * + * There are no restrictions on the format of the PNG input itself; all valid + * color types, bit depths, and interlace methods are acceptable, and the + * input image is transformed as necessary to the requested in-memory format + * during the png_image_finish_read() step. The only caveat is that if you + * request a color-mapped image from a PNG that is full-color or makes + * complex use of an alpha channel the transformation is extremely lossy and the + * result may look terrible. + * + * To write a PNG file using the simplified API: + * + * 1) Declare a 'png_image' structure on the stack and memset() it to all zero. + * 2) Initialize the members of the structure that describe the image, setting + * the 'format' member to the format of the image samples. + * 3) Call the appropriate png_image_write... function with a pointer to the + * image and, if necessary, the color-map to write the PNG data. + * + * png_image is a structure that describes the in-memory format of an image + * when it is being read or defines the in-memory format of an image that you + * need to write: + */ +#if defined(PNG_SIMPLIFIED_READ_SUPPORTED) || \ + defined(PNG_SIMPLIFIED_WRITE_SUPPORTED) + +#define PNG_IMAGE_VERSION 1 + +typedef struct png_control *png_controlp; +typedef struct +{ + png_controlp opaque; /* Initialize to NULL, free with png_image_free */ + png_uint_32 version; /* Set to PNG_IMAGE_VERSION */ + png_uint_32 width; /* Image width in pixels (columns) */ + png_uint_32 height; /* Image height in pixels (rows) */ + png_uint_32 format; /* Image format as defined below */ + png_uint_32 flags; /* A bit mask containing informational flags */ + png_uint_32 colormap_entries; + /* Number of entries in the color-map */ + + /* In the event of an error or warning the following field will be set to a + * non-zero value and the 'message' field will contain a '\0' terminated + * string with the libpng error or warning message. If both warnings and + * an error were encountered, only the error is recorded. If there + * are multiple warnings, only the first one is recorded. + * + * The upper 30 bits of this value are reserved, the low two bits contain + * a value as follows: + */ +# define PNG_IMAGE_WARNING 1 +# define PNG_IMAGE_ERROR 2 + /* + * The result is a two-bit code such that a value more than 1 indicates + * a failure in the API just called: + * + * 0 - no warning or error + * 1 - warning + * 2 - error + * 3 - error preceded by warning + */ +# define PNG_IMAGE_FAILED(png_cntrl) ((((png_cntrl).warning_or_error)&0x03)>1) + + png_uint_32 warning_or_error; + + char message[64]; +} png_image, *png_imagep; + +/* The samples of the image have one to four channels whose components have + * original values in the range 0 to 1.0: + * + * 1: A single gray or luminance channel (G). + * 2: A gray/luminance channel and an alpha channel (GA). + * 3: Three red, green, blue color channels (RGB). + * 4: Three color channels and an alpha channel (RGBA). + * + * The components are encoded in one of two ways: + * + * a) As a small integer, value 0..255, contained in a single byte. For the + * alpha channel the original value is simply value/255. For the color or + * luminance channels the value is encoded according to the sRGB specification + * and matches the 8-bit format expected by typical display devices. + * + * The color/gray channels are not scaled (pre-multiplied) by the alpha + * channel and are suitable for passing to color management software. + * + * b) As a value in the range 0..65535, contained in a 2-byte integer. All + * channels can be converted to the original value by dividing by 65535; all + * channels are linear. Color channels use the RGB encoding (RGB end-points) of + * the sRGB specification. This encoding is identified by the + * PNG_FORMAT_FLAG_LINEAR flag below. + * + * When the simplified API needs to convert between sRGB and linear colorspaces, + * the actual sRGB transfer curve defined in the sRGB specification (see the + * article at ) is used, not the gamma=1/2.2 + * approximation used elsewhere in libpng. + * + * When an alpha channel is present it is expected to denote pixel coverage + * of the color or luminance channels and is returned as an associated alpha + * channel: the color/gray channels are scaled (pre-multiplied) by the alpha + * value. + * + * The samples are either contained directly in the image data, between 1 and 8 + * bytes per pixel according to the encoding, or are held in a color-map indexed + * by bytes in the image data. In the case of a color-map the color-map entries + * are individual samples, encoded as above, and the image data has one byte per + * pixel to select the relevant sample from the color-map. + */ + +/* PNG_FORMAT_* + * + * #defines to be used in png_image::format. Each #define identifies a + * particular layout of sample data and, if present, alpha values. There are + * separate defines for each of the two component encodings. + * + * A format is built up using single bit flag values. All combinations are + * valid. Formats can be built up from the flag values or you can use one of + * the predefined values below. When testing formats always use the FORMAT_FLAG + * macros to test for individual features - future versions of the library may + * add new flags. + * + * When reading or writing color-mapped images the format should be set to the + * format of the entries in the color-map then png_image_{read,write}_colormap + * called to read or write the color-map and set the format correctly for the + * image data. Do not set the PNG_FORMAT_FLAG_COLORMAP bit directly! + * + * NOTE: libpng can be built with particular features disabled. If you see + * compiler errors because the definition of one of the following flags has been + * compiled out it is because libpng does not have the required support. It is + * possible, however, for the libpng configuration to enable the format on just + * read or just write; in that case you may see an error at run time. You can + * guard against this by checking for the definition of the appropriate + * "_SUPPORTED" macro, one of: + * + * PNG_SIMPLIFIED_{READ,WRITE}_{BGR,AFIRST}_SUPPORTED + */ +#define PNG_FORMAT_FLAG_ALPHA 0x01U /* format with an alpha channel */ +#define PNG_FORMAT_FLAG_COLOR 0x02U /* color format: otherwise grayscale */ +#define PNG_FORMAT_FLAG_LINEAR 0x04U /* 2-byte channels else 1-byte */ +#define PNG_FORMAT_FLAG_COLORMAP 0x08U /* image data is color-mapped */ + +#ifdef PNG_FORMAT_BGR_SUPPORTED +# define PNG_FORMAT_FLAG_BGR 0x10U /* BGR colors, else order is RGB */ +#endif + +#ifdef PNG_FORMAT_AFIRST_SUPPORTED +# define PNG_FORMAT_FLAG_AFIRST 0x20U /* alpha channel comes first */ +#endif + +#define PNG_FORMAT_FLAG_ASSOCIATED_ALPHA 0x40U /* alpha channel is associated */ + +/* Commonly used formats have predefined macros. + * + * First the single byte (sRGB) formats: + */ +#define PNG_FORMAT_GRAY 0 +#define PNG_FORMAT_GA PNG_FORMAT_FLAG_ALPHA +#define PNG_FORMAT_AG (PNG_FORMAT_GA|PNG_FORMAT_FLAG_AFIRST) +#define PNG_FORMAT_RGB PNG_FORMAT_FLAG_COLOR +#define PNG_FORMAT_BGR (PNG_FORMAT_FLAG_COLOR|PNG_FORMAT_FLAG_BGR) +#define PNG_FORMAT_RGBA (PNG_FORMAT_RGB|PNG_FORMAT_FLAG_ALPHA) +#define PNG_FORMAT_ARGB (PNG_FORMAT_RGBA|PNG_FORMAT_FLAG_AFIRST) +#define PNG_FORMAT_BGRA (PNG_FORMAT_BGR|PNG_FORMAT_FLAG_ALPHA) +#define PNG_FORMAT_ABGR (PNG_FORMAT_BGRA|PNG_FORMAT_FLAG_AFIRST) + +/* Then the linear 2-byte formats. When naming these "Y" is used to + * indicate a luminance (gray) channel. + */ +#define PNG_FORMAT_LINEAR_Y PNG_FORMAT_FLAG_LINEAR +#define PNG_FORMAT_LINEAR_Y_ALPHA (PNG_FORMAT_FLAG_LINEAR|PNG_FORMAT_FLAG_ALPHA) +#define PNG_FORMAT_LINEAR_RGB (PNG_FORMAT_FLAG_LINEAR|PNG_FORMAT_FLAG_COLOR) +#define PNG_FORMAT_LINEAR_RGB_ALPHA \ + (PNG_FORMAT_FLAG_LINEAR|PNG_FORMAT_FLAG_COLOR|PNG_FORMAT_FLAG_ALPHA) + +/* With color-mapped formats the image data is one byte for each pixel, the byte + * is an index into the color-map which is formatted as above. To obtain a + * color-mapped format it is sufficient just to add the PNG_FOMAT_FLAG_COLORMAP + * to one of the above definitions, or you can use one of the definitions below. + */ +#define PNG_FORMAT_RGB_COLORMAP (PNG_FORMAT_RGB|PNG_FORMAT_FLAG_COLORMAP) +#define PNG_FORMAT_BGR_COLORMAP (PNG_FORMAT_BGR|PNG_FORMAT_FLAG_COLORMAP) +#define PNG_FORMAT_RGBA_COLORMAP (PNG_FORMAT_RGBA|PNG_FORMAT_FLAG_COLORMAP) +#define PNG_FORMAT_ARGB_COLORMAP (PNG_FORMAT_ARGB|PNG_FORMAT_FLAG_COLORMAP) +#define PNG_FORMAT_BGRA_COLORMAP (PNG_FORMAT_BGRA|PNG_FORMAT_FLAG_COLORMAP) +#define PNG_FORMAT_ABGR_COLORMAP (PNG_FORMAT_ABGR|PNG_FORMAT_FLAG_COLORMAP) + +/* PNG_IMAGE macros + * + * These are convenience macros to derive information from a png_image + * structure. The PNG_IMAGE_SAMPLE_ macros return values appropriate to the + * actual image sample values - either the entries in the color-map or the + * pixels in the image. The PNG_IMAGE_PIXEL_ macros return corresponding values + * for the pixels and will always return 1 for color-mapped formats. The + * remaining macros return information about the rows in the image and the + * complete image. + * + * NOTE: All the macros that take a png_image::format parameter are compile time + * constants if the format parameter is, itself, a constant. Therefore these + * macros can be used in array declarations and case labels where required. + * Similarly the macros are also pre-processor constants (sizeof is not used) so + * they can be used in #if tests. + * + * First the information about the samples. + */ +#define PNG_IMAGE_SAMPLE_CHANNELS(fmt)\ + (((fmt)&(PNG_FORMAT_FLAG_COLOR|PNG_FORMAT_FLAG_ALPHA))+1) + /* Return the total number of channels in a given format: 1..4 */ + +#define PNG_IMAGE_SAMPLE_COMPONENT_SIZE(fmt)\ + ((((fmt) & PNG_FORMAT_FLAG_LINEAR) >> 2)+1) + /* Return the size in bytes of a single component of a pixel or color-map + * entry (as appropriate) in the image: 1 or 2. + */ + +#define PNG_IMAGE_SAMPLE_SIZE(fmt)\ + (PNG_IMAGE_SAMPLE_CHANNELS(fmt) * PNG_IMAGE_SAMPLE_COMPONENT_SIZE(fmt)) + /* This is the size of the sample data for one sample. If the image is + * color-mapped it is the size of one color-map entry (and image pixels are + * one byte in size), otherwise it is the size of one image pixel. + */ + +#define PNG_IMAGE_MAXIMUM_COLORMAP_COMPONENTS(fmt)\ + (PNG_IMAGE_SAMPLE_CHANNELS(fmt) * 256) + /* The maximum size of the color-map required by the format expressed in a + * count of components. This can be used to compile-time allocate a + * color-map: + * + * png_uint_16 colormap[PNG_IMAGE_MAXIMUM_COLORMAP_COMPONENTS(linear_fmt)]; + * + * png_byte colormap[PNG_IMAGE_MAXIMUM_COLORMAP_COMPONENTS(sRGB_fmt)]; + * + * Alternatively use the PNG_IMAGE_COLORMAP_SIZE macro below to use the + * information from one of the png_image_begin_read_ APIs and dynamically + * allocate the required memory. + */ + +/* Corresponding information about the pixels */ +#define PNG_IMAGE_PIXEL_(test,fmt)\ + (((fmt)&PNG_FORMAT_FLAG_COLORMAP)?1:test(fmt)) + +#define PNG_IMAGE_PIXEL_CHANNELS(fmt)\ + PNG_IMAGE_PIXEL_(PNG_IMAGE_SAMPLE_CHANNELS,fmt) + /* The number of separate channels (components) in a pixel; 1 for a + * color-mapped image. + */ + +#define PNG_IMAGE_PIXEL_COMPONENT_SIZE(fmt)\ + PNG_IMAGE_PIXEL_(PNG_IMAGE_SAMPLE_COMPONENT_SIZE,fmt) + /* The size, in bytes, of each component in a pixel; 1 for a color-mapped + * image. + */ + +#define PNG_IMAGE_PIXEL_SIZE(fmt) PNG_IMAGE_PIXEL_(PNG_IMAGE_SAMPLE_SIZE,fmt) + /* The size, in bytes, of a complete pixel; 1 for a color-mapped image. */ + +/* Information about the whole row, or whole image */ +#define PNG_IMAGE_ROW_STRIDE(image)\ + (PNG_IMAGE_PIXEL_CHANNELS((image).format) * (image).width) + /* Return the total number of components in a single row of the image; this + * is the minimum 'row stride', the minimum count of components between each + * row. For a color-mapped image this is the minimum number of bytes in a + * row. + * + * WARNING: this macro overflows for some images with more than one component + * and very large image widths. libpng will refuse to process an image where + * this macro would overflow. + */ + +#define PNG_IMAGE_BUFFER_SIZE(image, row_stride)\ + (PNG_IMAGE_PIXEL_COMPONENT_SIZE((image).format)*(image).height*(row_stride)) + /* Return the size, in bytes, of an image buffer given a png_image and a row + * stride - the number of components to leave space for in each row. + * + * WARNING: this macro overflows a 32-bit integer for some large PNG images, + * libpng will refuse to process an image where such an overflow would occur. + */ + +#define PNG_IMAGE_SIZE(image)\ + PNG_IMAGE_BUFFER_SIZE(image, PNG_IMAGE_ROW_STRIDE(image)) + /* Return the size, in bytes, of the image in memory given just a png_image; + * the row stride is the minimum stride required for the image. + */ + +#define PNG_IMAGE_COLORMAP_SIZE(image)\ + (PNG_IMAGE_SAMPLE_SIZE((image).format) * (image).colormap_entries) + /* Return the size, in bytes, of the color-map of this image. If the image + * format is not a color-map format this will return a size sufficient for + * 256 entries in the given format; check PNG_FORMAT_FLAG_COLORMAP if + * you don't want to allocate a color-map in this case. + */ + +/* PNG_IMAGE_FLAG_* + * + * Flags containing additional information about the image are held in the + * 'flags' field of png_image. + */ +#define PNG_IMAGE_FLAG_COLORSPACE_NOT_sRGB 0x01 + /* This indicates that the RGB values of the in-memory bitmap do not + * correspond to the red, green and blue end-points defined by sRGB. + */ + +#define PNG_IMAGE_FLAG_FAST 0x02 + /* On write emphasise speed over compression; the resultant PNG file will be + * larger but will be produced significantly faster, particular for large + * images. Do not use this option for images which will be distributed, only + * used it when producing intermediate files that will be read back in + * repeatedly. For a typical 24-bit image the option will double the read + * speed at the cost of increasing the image size by 25%, however for many + * more compressible images the PNG file can be 10 times larger with only a + * slight speed gain. + */ + +#define PNG_IMAGE_FLAG_16BIT_sRGB 0x04 + /* On read if the image is a 16-bit per component image and there is no gAMA + * or sRGB chunk assume that the components are sRGB encoded. Notice that + * images output by the simplified API always have gamma information; setting + * this flag only affects the interpretation of 16-bit images from an + * external source. It is recommended that the application expose this flag + * to the user; the user can normally easily recognize the difference between + * linear and sRGB encoding. This flag has no effect on write - the data + * passed to the write APIs must have the correct encoding (as defined + * above.) + * + * If the flag is not set (the default) input 16-bit per component data is + * assumed to be linear. + * + * NOTE: the flag can only be set after the png_image_begin_read_ call, + * because that call initializes the 'flags' field. + */ + +#ifdef PNG_SIMPLIFIED_READ_SUPPORTED +/* READ APIs + * --------- + * + * The png_image passed to the read APIs must have been initialized by setting + * the png_controlp field 'opaque' to NULL (or, safer, memset the whole thing.) + */ +#ifdef PNG_STDIO_SUPPORTED +PNG_EXPORT(234, int, png_image_begin_read_from_file, (png_imagep image, + const char *file_name)); + /* The named file is opened for read and the image header is filled in + * from the PNG header in the file. + */ + +PNG_EXPORT(235, int, png_image_begin_read_from_stdio, (png_imagep image, + FILE* file)); + /* The PNG header is read from the stdio FILE object. */ +#endif /* STDIO */ + +PNG_EXPORT(236, int, png_image_begin_read_from_memory, (png_imagep image, + png_const_voidp memory, size_t size)); + /* The PNG header is read from the given memory buffer. */ + +PNG_EXPORT(237, int, png_image_finish_read, (png_imagep image, + png_const_colorp background, void *buffer, png_int_32 row_stride, + void *colormap)); + /* Finish reading the image into the supplied buffer and clean up the + * png_image structure. + * + * row_stride is the step, in byte or 2-byte units as appropriate, + * between adjacent rows. A positive stride indicates that the top-most row + * is first in the buffer - the normal top-down arrangement. A negative + * stride indicates that the bottom-most row is first in the buffer. + * + * background need only be supplied if an alpha channel must be removed from + * a png_byte format and the removal is to be done by compositing on a solid + * color; otherwise it may be NULL and any composition will be done directly + * onto the buffer. The value is an sRGB color to use for the background, + * for grayscale output the green channel is used. + * + * background must be supplied when an alpha channel must be removed from a + * single byte color-mapped output format, in other words if: + * + * 1) The original format from png_image_begin_read_from_* had + * PNG_FORMAT_FLAG_ALPHA set. + * 2) The format set by the application does not. + * 3) The format set by the application has PNG_FORMAT_FLAG_COLORMAP set and + * PNG_FORMAT_FLAG_LINEAR *not* set. + * + * For linear output removing the alpha channel is always done by compositing + * on black and background is ignored. + * + * colormap must be supplied when PNG_FORMAT_FLAG_COLORMAP is set. It must + * be at least the size (in bytes) returned by PNG_IMAGE_COLORMAP_SIZE. + * image->colormap_entries will be updated to the actual number of entries + * written to the colormap; this may be less than the original value. + */ + +PNG_EXPORT(238, void, png_image_free, (png_imagep image)); + /* Free any data allocated by libpng in image->opaque, setting the pointer to + * NULL. May be called at any time after the structure is initialized. + */ +#endif /* SIMPLIFIED_READ */ + +#ifdef PNG_SIMPLIFIED_WRITE_SUPPORTED +/* WRITE APIS + * ---------- + * For write you must initialize a png_image structure to describe the image to + * be written. To do this use memset to set the whole structure to 0 then + * initialize fields describing your image. + * + * version: must be set to PNG_IMAGE_VERSION + * opaque: must be initialized to NULL + * width: image width in pixels + * height: image height in rows + * format: the format of the data (image and color-map) you wish to write + * flags: set to 0 unless one of the defined flags applies; set + * PNG_IMAGE_FLAG_COLORSPACE_NOT_sRGB for color format images where the RGB + * values do not correspond to the colors in sRGB. + * colormap_entries: set to the number of entries in the color-map (0 to 256) + */ +#ifdef PNG_SIMPLIFIED_WRITE_STDIO_SUPPORTED +PNG_EXPORT(239, int, png_image_write_to_file, (png_imagep image, + const char *file, int convert_to_8bit, const void *buffer, + png_int_32 row_stride, const void *colormap)); + /* Write the image to the named file. */ + +PNG_EXPORT(240, int, png_image_write_to_stdio, (png_imagep image, FILE *file, + int convert_to_8_bit, const void *buffer, png_int_32 row_stride, + const void *colormap)); + /* Write the image to the given (FILE*). */ +#endif /* SIMPLIFIED_WRITE_STDIO */ + +/* With all write APIs if image is in one of the linear formats with 16-bit + * data then setting convert_to_8_bit will cause the output to be an 8-bit PNG + * gamma encoded according to the sRGB specification, otherwise a 16-bit linear + * encoded PNG file is written. + * + * With color-mapped data formats the colormap parameter point to a color-map + * with at least image->colormap_entries encoded in the specified format. If + * the format is linear the written PNG color-map will be converted to sRGB + * regardless of the convert_to_8_bit flag. + * + * With all APIs row_stride is handled as in the read APIs - it is the spacing + * from one row to the next in component sized units (1 or 2 bytes) and if + * negative indicates a bottom-up row layout in the buffer. If row_stride is + * zero, libpng will calculate it for you from the image width and number of + * channels. + * + * Note that the write API does not support interlacing, sub-8-bit pixels or + * most ancillary chunks. If you need to write text chunks (e.g. for copyright + * notices) you need to use one of the other APIs. + */ + +PNG_EXPORT(245, int, png_image_write_to_memory, (png_imagep image, void *memory, + png_alloc_size_t * PNG_RESTRICT memory_bytes, int convert_to_8_bit, + const void *buffer, png_int_32 row_stride, const void *colormap)); + /* Write the image to the given memory buffer. The function both writes the + * whole PNG data stream to *memory and updates *memory_bytes with the count + * of bytes written. + * + * 'memory' may be NULL. In this case *memory_bytes is not read however on + * success the number of bytes which would have been written will still be + * stored in *memory_bytes. On failure *memory_bytes will contain 0. + * + * If 'memory' is not NULL it must point to memory[*memory_bytes] of + * writeable memory. + * + * If the function returns success memory[*memory_bytes] (if 'memory' is not + * NULL) contains the written PNG data. *memory_bytes will always be less + * than or equal to the original value. + * + * If the function returns false and *memory_bytes was not changed an error + * occurred during write. If *memory_bytes was changed, or is not 0 if + * 'memory' was NULL, the write would have succeeded but for the memory + * buffer being too small. *memory_bytes contains the required number of + * bytes and will be bigger that the original value. + */ + +#define png_image_write_get_memory_size(image, size, convert_to_8_bit, buffer,\ + row_stride, colormap)\ + png_image_write_to_memory(&(image), 0, &(size), convert_to_8_bit, buffer,\ + row_stride, colormap) + /* Return the amount of memory in 'size' required to compress this image. + * The png_image structure 'image' must be filled in as in the above + * function and must not be changed before the actual write call, the buffer + * and all other parameters must also be identical to that in the final + * write call. The 'size' variable need not be initialized. + * + * NOTE: the macro returns true/false, if false is returned 'size' will be + * set to zero and the write failed and probably will fail if tried again. + */ + +/* You can pre-allocate the buffer by making sure it is of sufficient size + * regardless of the amount of compression achieved. The buffer size will + * always be bigger than the original image and it will never be filled. The + * following macros are provided to assist in allocating the buffer. + */ +#define PNG_IMAGE_DATA_SIZE(image) (PNG_IMAGE_SIZE(image)+(image).height) + /* The number of uncompressed bytes in the PNG byte encoding of the image; + * uncompressing the PNG IDAT data will give this number of bytes. + * + * NOTE: while PNG_IMAGE_SIZE cannot overflow for an image in memory this + * macro can because of the extra bytes used in the PNG byte encoding. You + * need to avoid this macro if your image size approaches 2^30 in width or + * height. The same goes for the remainder of these macros; they all produce + * bigger numbers than the actual in-memory image size. + */ +#ifndef PNG_ZLIB_MAX_SIZE +# define PNG_ZLIB_MAX_SIZE(b) ((b)+(((b)+7U)>>3)+(((b)+63U)>>6)+11U) + /* An upper bound on the number of compressed bytes given 'b' uncompressed + * bytes. This is based on deflateBounds() in zlib; different + * implementations of zlib compression may conceivably produce more data so + * if your zlib implementation is not zlib itself redefine this macro + * appropriately. + */ +#endif + +#define PNG_IMAGE_COMPRESSED_SIZE_MAX(image)\ + PNG_ZLIB_MAX_SIZE((png_alloc_size_t)PNG_IMAGE_DATA_SIZE(image)) + /* An upper bound on the size of the data in the PNG IDAT chunks. */ + +#define PNG_IMAGE_PNG_SIZE_MAX_(image, image_size)\ + ((8U/*sig*/+25U/*IHDR*/+16U/*gAMA*/+44U/*cHRM*/+12U/*IEND*/+\ + (((image).format&PNG_FORMAT_FLAG_COLORMAP)?/*colormap: PLTE, tRNS*/\ + 12U+3U*(image).colormap_entries/*PLTE data*/+\ + (((image).format&PNG_FORMAT_FLAG_ALPHA)?\ + 12U/*tRNS*/+(image).colormap_entries:0U):0U)+\ + 12U)+(12U*((image_size)/PNG_ZBUF_SIZE))/*IDAT*/+(image_size)) + /* A helper for the following macro; if your compiler cannot handle the + * following macro use this one with the result of + * PNG_IMAGE_COMPRESSED_SIZE_MAX(image) as the second argument (most + * compilers should handle this just fine.) + */ + +#define PNG_IMAGE_PNG_SIZE_MAX(image)\ + PNG_IMAGE_PNG_SIZE_MAX_(image, PNG_IMAGE_COMPRESSED_SIZE_MAX(image)) + /* An upper bound on the total length of the PNG data stream for 'image'. + * The result is of type png_alloc_size_t, on 32-bit systems this may + * overflow even though PNG_IMAGE_DATA_SIZE does not overflow; the write will + * run out of buffer space but return a corrected size which should work. + */ +#endif /* SIMPLIFIED_WRITE */ +/******************************************************************************* + * END OF SIMPLIFIED API + ******************************************************************************/ +#endif /* SIMPLIFIED_{READ|WRITE} */ + +/******************************************************************************* + * Section 6: IMPLEMENTATION OPTIONS + ******************************************************************************* + * + * Support for arbitrary implementation-specific optimizations. The API allows + * particular options to be turned on or off. 'Option' is the number of the + * option and 'onoff' is 0 (off) or non-0 (on). The value returned is given + * by the PNG_OPTION_ defines below. + * + * HARDWARE: normally hardware capabilities, such as the Intel SSE instructions, + * are detected at run time, however sometimes it may be impossible + * to do this in user mode, in which case it is necessary to discover + * the capabilities in an OS specific way. Such capabilities are + * listed here when libpng has support for them and must be turned + * ON by the application if present. + * + * SOFTWARE: sometimes software optimizations actually result in performance + * decrease on some architectures or systems, or with some sets of + * PNG images. 'Software' options allow such optimizations to be + * selected at run time. + */ +#ifdef PNG_SET_OPTION_SUPPORTED +#ifdef PNG_ARM_NEON_API_SUPPORTED +# define PNG_ARM_NEON 0 /* HARDWARE: ARM Neon SIMD instructions supported */ +#endif +#define PNG_MAXIMUM_INFLATE_WINDOW 2 /* SOFTWARE: force maximum window */ +#define PNG_SKIP_sRGB_CHECK_PROFILE 4 /* SOFTWARE: Check ICC profile for sRGB */ +#ifdef PNG_MIPS_MSA_API_SUPPORTED +# define PNG_MIPS_MSA 6 /* HARDWARE: MIPS Msa SIMD instructions supported */ +#endif +#ifdef PNG_DISABLE_ADLER32_CHECK_SUPPORTED +# define PNG_IGNORE_ADLER32 8 /* SOFTWARE: disable Adler32 check on IDAT */ +#endif +#ifdef PNG_POWERPC_VSX_API_SUPPORTED +# define PNG_POWERPC_VSX 10 /* HARDWARE: PowerPC VSX SIMD instructions + * supported */ +#endif +#ifdef PNG_MIPS_MMI_API_SUPPORTED +# define PNG_MIPS_MMI 12 /* HARDWARE: MIPS MMI SIMD instructions supported */ +#endif + +#define PNG_OPTION_NEXT 14 /* Next option - numbers must be even */ + +/* Return values: NOTE: there are four values and 'off' is *not* zero */ +#define PNG_OPTION_UNSET 0 /* Unset - defaults to off */ +#define PNG_OPTION_INVALID 1 /* Option number out of range */ +#define PNG_OPTION_OFF 2 +#define PNG_OPTION_ON 3 + +PNG_EXPORT(244, int, png_set_option, (png_structrp png_ptr, int option, + int onoff)); +#endif /* SET_OPTION */ + +/******************************************************************************* + * END OF HARDWARE AND SOFTWARE OPTIONS + ******************************************************************************/ + +/* Maintainer: Put new public prototypes here ^, in libpng.3, in project + * defs, and in scripts/symbols.def. + */ + +/* The last ordinal number (this is the *last* one already used; the next + * one to use is one more than this.) + */ +#ifdef PNG_EXPORT_LAST_ORDINAL + PNG_EXPORT_LAST_ORDINAL(259); +#endif + +#ifdef __cplusplus +} +#endif + +#endif /* PNG_VERSION_INFO_ONLY */ +/* Do not put anything past this line */ +#endif /* PNG_H */ diff --git a/dependencies/winx64/include/pngconf.h b/dependencies/winx64/include/pngconf.h new file mode 100644 index 0000000..42fa973 --- /dev/null +++ b/dependencies/winx64/include/pngconf.h @@ -0,0 +1,622 @@ +/* pngconf.h - machine-configurable file for libpng + * + * libpng version 1.6.47 + * + * Copyright (c) 2018-2025 Cosmin Truta + * Copyright (c) 1998-2002,2004,2006-2016,2018 Glenn Randers-Pehrson + * Copyright (c) 1996-1997 Andreas Dilger + * Copyright (c) 1995-1996 Guy Eric Schalnat, Group 42, Inc. + * + * This code is released under the libpng license. + * For conditions of distribution and use, see the disclaimer + * and license in png.h + * + * Any machine specific code is near the front of this file, so if you + * are configuring libpng for a machine, you may want to read the section + * starting here down to where it starts to typedef png_color, png_text, + * and png_info. + */ + +#ifndef PNGCONF_H +#define PNGCONF_H + +#ifndef PNG_BUILDING_SYMBOL_TABLE /* else includes may cause problems */ + +/* From libpng 1.6.0 libpng requires an ANSI X3.159-1989 ("ISOC90") compliant C + * compiler for correct compilation. The following header files are required by + * the standard. If your compiler doesn't provide these header files, or they + * do not match the standard, you will need to provide/improve them. + */ +#include +#include + +/* Library header files. These header files are all defined by ISOC90; libpng + * expects conformant implementations, however, an ISOC90 conformant system need + * not provide these header files if the functionality cannot be implemented. + * In this case it will be necessary to disable the relevant parts of libpng in + * the build of pnglibconf.h. + * + * Prior to 1.6.0 string.h was included here; the API changes in 1.6.0 to not + * include this unnecessary header file. + */ + +#ifdef PNG_STDIO_SUPPORTED + /* Required for the definition of FILE: */ +# include +#endif + +#ifdef PNG_SETJMP_SUPPORTED + /* Required for the definition of jmp_buf and the declaration of longjmp: */ +# include +#endif + +#ifdef PNG_CONVERT_tIME_SUPPORTED + /* Required for struct tm: */ +# include +#endif + +#endif /* PNG_BUILDING_SYMBOL_TABLE */ + +/* Prior to 1.6.0, it was possible to turn off 'const' in declarations, + * using PNG_NO_CONST. This is no longer supported. + */ +#define PNG_CONST const /* backward compatibility only */ + +/* This controls optimization of the reading of 16-bit and 32-bit + * values from PNG files. It can be set on a per-app-file basis: it + * just changes whether a macro is used when the function is called. + * The library builder sets the default; if read functions are not + * built into the library the macro implementation is forced on. + */ +#ifndef PNG_READ_INT_FUNCTIONS_SUPPORTED +# define PNG_USE_READ_MACROS +#endif +#if !defined(PNG_NO_USE_READ_MACROS) && !defined(PNG_USE_READ_MACROS) +# if PNG_DEFAULT_READ_MACROS +# define PNG_USE_READ_MACROS +# endif +#endif + +/* COMPILER SPECIFIC OPTIONS. + * + * These options are provided so that a variety of difficult compilers + * can be used. Some are fixed at build time (e.g. PNG_API_RULE + * below) but still have compiler specific implementations, others + * may be changed on a per-file basis when compiling against libpng. + */ + +/* The PNGARG macro was used in versions of libpng prior to 1.6.0 to protect + * against legacy (pre ISOC90) compilers that did not understand function + * prototypes. [Deprecated.] + */ +#ifndef PNGARG +# define PNGARG(arglist) arglist +#endif + +/* Function calling conventions. + * ============================= + * Normally it is not necessary to specify to the compiler how to call + * a function - it just does it - however on x86 systems derived from + * Microsoft and Borland C compilers ('IBM PC', 'DOS', 'Windows' systems + * and some others) there are multiple ways to call a function and the + * default can be changed on the compiler command line. For this reason + * libpng specifies the calling convention of every exported function and + * every function called via a user supplied function pointer. This is + * done in this file by defining the following macros: + * + * PNGAPI Calling convention for exported functions. + * PNGCBAPI Calling convention for user provided (callback) functions. + * PNGCAPI Calling convention used by the ANSI-C library (required + * for longjmp callbacks and sometimes used internally to + * specify the calling convention for zlib). + * + * These macros should never be overridden. If it is necessary to + * change calling convention in a private build this can be done + * by setting PNG_API_RULE (which defaults to 0) to one of the values + * below to select the correct 'API' variants. + * + * PNG_API_RULE=0 Use PNGCAPI - the 'C' calling convention - throughout. + * This is correct in every known environment. + * PNG_API_RULE=1 Use the operating system convention for PNGAPI and + * the 'C' calling convention (from PNGCAPI) for + * callbacks (PNGCBAPI). This is no longer required + * in any known environment - if it has to be used + * please post an explanation of the problem to the + * libpng mailing list. + * + * These cases only differ if the operating system does not use the C + * calling convention, at present this just means the above cases + * (x86 DOS/Windows systems) and, even then, this does not apply to + * Cygwin running on those systems. + * + * Note that the value must be defined in pnglibconf.h so that what + * the application uses to call the library matches the conventions + * set when building the library. + */ + +/* Symbol export + * ============= + * When building a shared library it is almost always necessary to tell + * the compiler which symbols to export. The png.h macro 'PNG_EXPORT' + * is used to mark the symbols. On some systems these symbols can be + * extracted at link time and need no special processing by the compiler, + * on other systems the symbols are flagged by the compiler and just + * the declaration requires a special tag applied (unfortunately) in a + * compiler dependent way. Some systems can do either. + * + * A small number of older systems also require a symbol from a DLL to + * be flagged to the program that calls it. This is a problem because + * we do not know in the header file included by application code that + * the symbol will come from a shared library, as opposed to a statically + * linked one. For this reason the application must tell us by setting + * the magic flag PNG_USE_DLL to turn on the special processing before + * it includes png.h. + * + * Four additional macros are used to make this happen: + * + * PNG_IMPEXP The magic (if any) to cause a symbol to be exported from + * the build or imported if PNG_USE_DLL is set - compiler + * and system specific. + * + * PNG_EXPORT_TYPE(type) A macro that pre or appends PNG_IMPEXP to + * 'type', compiler specific. + * + * PNG_DLL_EXPORT Set to the magic to use during a libpng build to + * make a symbol exported from the DLL. Not used in the + * public header files; see pngpriv.h for how it is used + * in the libpng build. + * + * PNG_DLL_IMPORT Set to the magic to force the libpng symbols to come + * from a DLL - used to define PNG_IMPEXP when + * PNG_USE_DLL is set. + */ + +/* System specific discovery. + * ========================== + * This code is used at build time to find PNG_IMPEXP, the API settings + * and PNG_EXPORT_TYPE(), it may also set a macro to indicate the DLL + * import processing is possible. On Windows systems it also sets + * compiler-specific macros to the values required to change the calling + * conventions of the various functions. + */ +#if defined(_WIN32) || defined(__WIN32__) || defined(__NT__) || \ + defined(__CYGWIN__) + /* Windows system (DOS doesn't support DLLs). Includes builds under Cygwin or + * MinGW on any architecture currently supported by Windows. Also includes + * Watcom builds but these need special treatment because they are not + * compatible with GCC or Visual C because of different calling conventions. + */ +# if PNG_API_RULE == 2 + /* If this line results in an error, either because __watcall is not + * understood or because of a redefine just below you cannot use *this* + * build of the library with the compiler you are using. *This* build was + * build using Watcom and applications must also be built using Watcom! + */ +# define PNGCAPI __watcall +# endif + +# if defined(__GNUC__) || (defined(_MSC_VER) && (_MSC_VER >= 800)) +# define PNGCAPI __cdecl +# if PNG_API_RULE == 1 + /* If this line results in an error __stdcall is not understood and + * PNG_API_RULE should not have been set to '1'. + */ +# define PNGAPI __stdcall +# endif +# else + /* An older compiler, or one not detected (erroneously) above, + * if necessary override on the command line to get the correct + * variants for the compiler. + */ +# ifndef PNGCAPI +# define PNGCAPI _cdecl +# endif +# if PNG_API_RULE == 1 && !defined(PNGAPI) +# define PNGAPI _stdcall +# endif +# endif /* compiler/api */ + + /* NOTE: PNGCBAPI always defaults to PNGCAPI. */ + +# if defined(PNGAPI) && !defined(PNG_USER_PRIVATEBUILD) +# error "PNG_USER_PRIVATEBUILD must be defined if PNGAPI is changed" +# endif + +# if (defined(_MSC_VER) && _MSC_VER < 800) ||\ + (defined(__BORLANDC__) && __BORLANDC__ < 0x500) + /* older Borland and MSC + * compilers used '__export' and required this to be after + * the type. + */ +# ifndef PNG_EXPORT_TYPE +# define PNG_EXPORT_TYPE(type) type PNG_IMPEXP +# endif +# define PNG_DLL_EXPORT __export +# else /* newer compiler */ +# define PNG_DLL_EXPORT __declspec(dllexport) +# ifndef PNG_DLL_IMPORT +# define PNG_DLL_IMPORT __declspec(dllimport) +# endif +# endif /* compiler */ + +#else /* !Windows */ +# if (defined(__IBMC__) || defined(__IBMCPP__)) && defined(__OS2__) +# define PNGAPI _System +# else /* !Windows/x86 && !OS/2 */ + /* Use the defaults, or define PNG*API on the command line (but + * this will have to be done for every compile!) + */ +# endif /* other system, !OS/2 */ +#endif /* !Windows/x86 */ + +/* Now do all the defaulting . */ +#ifndef PNGCAPI +# define PNGCAPI +#endif +#ifndef PNGCBAPI +# define PNGCBAPI PNGCAPI +#endif +#ifndef PNGAPI +# define PNGAPI PNGCAPI +#endif + +/* PNG_IMPEXP may be set on the compilation system command line or (if not set) + * then in an internal header file when building the library, otherwise (when + * using the library) it is set here. + */ +#ifndef PNG_IMPEXP +# if defined(PNG_USE_DLL) && defined(PNG_DLL_IMPORT) + /* This forces use of a DLL, disallowing static linking */ +# define PNG_IMPEXP PNG_DLL_IMPORT +# endif + +# ifndef PNG_IMPEXP +# define PNG_IMPEXP +# endif +#endif + +/* In 1.5.2 the definition of PNG_FUNCTION has been changed to always treat + * 'attributes' as a storage class - the attributes go at the start of the + * function definition, and attributes are always appended regardless of the + * compiler. This considerably simplifies these macros but may cause problems + * if any compilers both need function attributes and fail to handle them as + * a storage class (this is unlikely.) + */ +#ifndef PNG_FUNCTION +# define PNG_FUNCTION(type, name, args, attributes) attributes type name args +#endif + +#ifndef PNG_EXPORT_TYPE +# define PNG_EXPORT_TYPE(type) PNG_IMPEXP type +#endif + + /* The ordinal value is only relevant when preprocessing png.h for symbol + * table entries, so we discard it here. See the .dfn files in the + * scripts directory. + */ + +#ifndef PNG_EXPORTA +# define PNG_EXPORTA(ordinal, type, name, args, attributes) \ + PNG_FUNCTION(PNG_EXPORT_TYPE(type), (PNGAPI name), args, \ + PNG_LINKAGE_API attributes) +#endif + +/* ANSI-C (C90) does not permit a macro to be invoked with an empty argument, + * so make something non-empty to satisfy the requirement: + */ +#define PNG_EMPTY /*empty list*/ + +#define PNG_EXPORT(ordinal, type, name, args) \ + PNG_EXPORTA(ordinal, type, name, args, PNG_EMPTY) + +/* Use PNG_REMOVED to comment out a removed interface. */ +#ifndef PNG_REMOVED +# define PNG_REMOVED(ordinal, type, name, args, attributes) +#endif + +#ifndef PNG_CALLBACK +# define PNG_CALLBACK(type, name, args) type (PNGCBAPI name) args +#endif + +/* Support for compiler specific function attributes. These are used + * so that where compiler support is available incorrect use of API + * functions in png.h will generate compiler warnings. + * + * Added at libpng-1.2.41. + */ + +#ifndef PNG_NO_PEDANTIC_WARNINGS +# ifndef PNG_PEDANTIC_WARNINGS_SUPPORTED +# define PNG_PEDANTIC_WARNINGS_SUPPORTED +# endif +#endif + +#ifdef PNG_PEDANTIC_WARNINGS_SUPPORTED + /* Support for compiler specific function attributes. These are used + * so that where compiler support is available, incorrect use of API + * functions in png.h will generate compiler warnings. Added at libpng + * version 1.2.41. Disabling these removes the warnings but may also produce + * less efficient code. + */ +# if defined(__clang__) && defined(__has_attribute) + /* Clang defines both __clang__ and __GNUC__. Check __clang__ first. */ +# if !defined(PNG_USE_RESULT) && __has_attribute(__warn_unused_result__) +# define PNG_USE_RESULT __attribute__((__warn_unused_result__)) +# endif +# if !defined(PNG_NORETURN) && __has_attribute(__noreturn__) +# define PNG_NORETURN __attribute__((__noreturn__)) +# endif +# if !defined(PNG_ALLOCATED) && __has_attribute(__malloc__) +# define PNG_ALLOCATED __attribute__((__malloc__)) +# endif +# if !defined(PNG_DEPRECATED) && __has_attribute(__deprecated__) +# define PNG_DEPRECATED __attribute__((__deprecated__)) +# endif +# if !defined(PNG_PRIVATE) +# ifdef __has_extension +# if __has_extension(attribute_unavailable_with_message) +# define PNG_PRIVATE __attribute__((__unavailable__(\ + "This function is not exported by libpng."))) +# endif +# endif +# endif +# ifndef PNG_RESTRICT +# define PNG_RESTRICT __restrict +# endif + +# elif defined(__GNUC__) +# ifndef PNG_USE_RESULT +# define PNG_USE_RESULT __attribute__((__warn_unused_result__)) +# endif +# ifndef PNG_NORETURN +# define PNG_NORETURN __attribute__((__noreturn__)) +# endif +# if __GNUC__ >= 3 +# ifndef PNG_ALLOCATED +# define PNG_ALLOCATED __attribute__((__malloc__)) +# endif +# ifndef PNG_DEPRECATED +# define PNG_DEPRECATED __attribute__((__deprecated__)) +# endif +# ifndef PNG_PRIVATE +# if 0 /* Doesn't work so we use deprecated instead*/ +# define PNG_PRIVATE \ + __attribute__((warning("This function is not exported by libpng."))) +# else +# define PNG_PRIVATE \ + __attribute__((__deprecated__)) +# endif +# endif +# if ((__GNUC__ > 3) || !defined(__GNUC_MINOR__) || (__GNUC_MINOR__ >= 1)) +# ifndef PNG_RESTRICT +# define PNG_RESTRICT __restrict +# endif +# endif /* __GNUC__.__GNUC_MINOR__ > 3.0 */ +# endif /* __GNUC__ >= 3 */ + +# elif defined(_MSC_VER) && (_MSC_VER >= 1300) +# ifndef PNG_USE_RESULT +# define PNG_USE_RESULT /* not supported */ +# endif +# ifndef PNG_NORETURN +# define PNG_NORETURN __declspec(noreturn) +# endif +# ifndef PNG_ALLOCATED +# if (_MSC_VER >= 1400) +# define PNG_ALLOCATED __declspec(restrict) +# endif +# endif +# ifndef PNG_DEPRECATED +# define PNG_DEPRECATED __declspec(deprecated) +# endif +# ifndef PNG_PRIVATE +# define PNG_PRIVATE __declspec(deprecated) +# endif +# ifndef PNG_RESTRICT +# if (_MSC_VER >= 1400) +# define PNG_RESTRICT __restrict +# endif +# endif + +# elif defined(__WATCOMC__) +# ifndef PNG_RESTRICT +# define PNG_RESTRICT __restrict +# endif +# endif +#endif /* PNG_PEDANTIC_WARNINGS */ + +#ifndef PNG_DEPRECATED +# define PNG_DEPRECATED /* Use of this function is deprecated */ +#endif +#ifndef PNG_USE_RESULT +# define PNG_USE_RESULT /* The result of this function must be checked */ +#endif +#ifndef PNG_NORETURN +# define PNG_NORETURN /* This function does not return */ +#endif +#ifndef PNG_ALLOCATED +# define PNG_ALLOCATED /* The result of the function is new memory */ +#endif +#ifndef PNG_PRIVATE +# define PNG_PRIVATE /* This is a private libpng function */ +#endif +#ifndef PNG_RESTRICT +# define PNG_RESTRICT /* The C99 "restrict" feature */ +#endif + +#ifndef PNG_FP_EXPORT /* A floating point API. */ +# ifdef PNG_FLOATING_POINT_SUPPORTED +# define PNG_FP_EXPORT(ordinal, type, name, args)\ + PNG_EXPORT(ordinal, type, name, args); +# else /* No floating point APIs */ +# define PNG_FP_EXPORT(ordinal, type, name, args) +# endif +#endif +#ifndef PNG_FIXED_EXPORT /* A fixed point API. */ +# ifdef PNG_FIXED_POINT_SUPPORTED +# define PNG_FIXED_EXPORT(ordinal, type, name, args)\ + PNG_EXPORT(ordinal, type, name, args); +# else /* No fixed point APIs */ +# define PNG_FIXED_EXPORT(ordinal, type, name, args) +# endif +#endif + +#ifndef PNG_BUILDING_SYMBOL_TABLE +/* Some typedefs to get us started. These should be safe on most of the common + * platforms. + * + * png_uint_32 and png_int_32 may, currently, be larger than required to hold a + * 32-bit value however this is not normally advisable. + * + * png_uint_16 and png_int_16 should always be two bytes in size - this is + * verified at library build time. + * + * png_byte must always be one byte in size. + * + * The checks below use constants from limits.h, as defined by the ISOC90 + * standard. + */ +#if CHAR_BIT == 8 && UCHAR_MAX == 255 + typedef unsigned char png_byte; +#else +# error "libpng requires 8-bit bytes" +#endif + +#if INT_MIN == -32768 && INT_MAX == 32767 + typedef int png_int_16; +#elif SHRT_MIN == -32768 && SHRT_MAX == 32767 + typedef short png_int_16; +#else +# error "libpng requires a signed 16-bit type" +#endif + +#if UINT_MAX == 65535 + typedef unsigned int png_uint_16; +#elif USHRT_MAX == 65535 + typedef unsigned short png_uint_16; +#else +# error "libpng requires an unsigned 16-bit type" +#endif + +#if INT_MIN < -2147483646 && INT_MAX > 2147483646 + typedef int png_int_32; +#elif LONG_MIN < -2147483646 && LONG_MAX > 2147483646 + typedef long int png_int_32; +#else +# error "libpng requires a signed 32-bit (or more) type" +#endif + +#if UINT_MAX > 4294967294U + typedef unsigned int png_uint_32; +#elif ULONG_MAX > 4294967294U + typedef unsigned long int png_uint_32; +#else +# error "libpng requires an unsigned 32-bit (or more) type" +#endif + +/* Prior to 1.6.0, it was possible to disable the use of size_t and ptrdiff_t. + * From 1.6.0 onwards, an ISO C90 compiler, as well as a standard-compliant + * behavior of sizeof and ptrdiff_t are required. + * The legacy typedefs are provided here for backwards compatibility. + */ +typedef size_t png_size_t; +typedef ptrdiff_t png_ptrdiff_t; + +/* libpng needs to know the maximum value of 'size_t' and this controls the + * definition of png_alloc_size_t, below. This maximum value of size_t limits + * but does not control the maximum allocations the library makes - there is + * direct application control of this through png_set_user_limits(). + */ +#ifndef PNG_SMALL_SIZE_T + /* Compiler specific tests for systems where size_t is known to be less than + * 32 bits (some of these systems may no longer work because of the lack of + * 'far' support; see above.) + */ +# if (defined(__TURBOC__) && !defined(__FLAT__)) ||\ + (defined(_MSC_VER) && defined(MAXSEG_64K)) +# define PNG_SMALL_SIZE_T +# endif +#endif + +/* png_alloc_size_t is guaranteed to be no smaller than size_t, and no smaller + * than png_uint_32. Casts from size_t or png_uint_32 to png_alloc_size_t are + * not necessary; in fact, it is recommended not to use them at all, so that + * the compiler can complain when something turns out to be problematic. + * + * Casts in the other direction (from png_alloc_size_t to size_t or + * png_uint_32) should be explicitly applied; however, we do not expect to + * encounter practical situations that require such conversions. + * + * PNG_SMALL_SIZE_T must be defined if the maximum value of size_t is less than + * 4294967295 - i.e. less than the maximum value of png_uint_32. + */ +#ifdef PNG_SMALL_SIZE_T + typedef png_uint_32 png_alloc_size_t; +#else + typedef size_t png_alloc_size_t; +#endif + +/* Prior to 1.6.0 libpng offered limited support for Microsoft C compiler + * implementations of Intel CPU specific support of user-mode segmented address + * spaces, where 16-bit pointers address more than 65536 bytes of memory using + * separate 'segment' registers. The implementation requires two different + * types of pointer (only one of which includes the segment value.) + * + * If required this support is available in version 1.2 of libpng and may be + * available in versions through 1.5, although the correctness of the code has + * not been verified recently. + */ + +/* Typedef for floating-point numbers that are converted to fixed-point with a + * multiple of 100,000, e.g., gamma + */ +typedef png_int_32 png_fixed_point; + +/* Add typedefs for pointers */ +typedef void * png_voidp; +typedef const void * png_const_voidp; +typedef png_byte * png_bytep; +typedef const png_byte * png_const_bytep; +typedef png_uint_32 * png_uint_32p; +typedef const png_uint_32 * png_const_uint_32p; +typedef png_int_32 * png_int_32p; +typedef const png_int_32 * png_const_int_32p; +typedef png_uint_16 * png_uint_16p; +typedef const png_uint_16 * png_const_uint_16p; +typedef png_int_16 * png_int_16p; +typedef const png_int_16 * png_const_int_16p; +typedef char * png_charp; +typedef const char * png_const_charp; +typedef png_fixed_point * png_fixed_point_p; +typedef const png_fixed_point * png_const_fixed_point_p; +typedef size_t * png_size_tp; +typedef const size_t * png_const_size_tp; + +#ifdef PNG_STDIO_SUPPORTED +typedef FILE * png_FILE_p; +#endif + +#ifdef PNG_FLOATING_POINT_SUPPORTED +typedef double * png_doublep; +typedef const double * png_const_doublep; +#endif + +/* Pointers to pointers; i.e. arrays */ +typedef png_byte * * png_bytepp; +typedef png_uint_32 * * png_uint_32pp; +typedef png_int_32 * * png_int_32pp; +typedef png_uint_16 * * png_uint_16pp; +typedef png_int_16 * * png_int_16pp; +typedef const char * * png_const_charpp; +typedef char * * png_charpp; +typedef png_fixed_point * * png_fixed_point_pp; +#ifdef PNG_FLOATING_POINT_SUPPORTED +typedef double * * png_doublepp; +#endif + +/* Pointers to pointers to pointers; i.e., pointer to array */ +typedef char * * * png_charppp; + +#endif /* PNG_BUILDING_SYMBOL_TABLE */ + +#endif /* PNGCONF_H */ diff --git a/dependencies/winx64/include/pnglibconf.h b/dependencies/winx64/include/pnglibconf.h new file mode 100644 index 0000000..17245b4 --- /dev/null +++ b/dependencies/winx64/include/pnglibconf.h @@ -0,0 +1,233 @@ +/* pnglibconf.h - library build configuration */ + +/* libpng version 1.6.47 */ + +/* Copyright (c) 2018-2025 Cosmin Truta */ +/* Copyright (c) 1998-2002,2004,2006-2018 Glenn Randers-Pehrson */ + +/* This code is released under the libpng license. */ +/* For conditions of distribution and use, see the disclaimer */ +/* and license in png.h */ + +/* pnglibconf.h */ +/* Machine generated file: DO NOT EDIT */ +/* Derived from: scripts/pnglibconf.dfa */ +#ifndef PNGLCONF_H +#define PNGLCONF_H +/* options */ +#define PNG_16BIT_SUPPORTED +#define PNG_ALIGNED_MEMORY_SUPPORTED +/*#undef PNG_ARM_NEON_API_SUPPORTED*/ +/*#undef PNG_ARM_NEON_CHECK_SUPPORTED*/ +#define PNG_BENIGN_ERRORS_SUPPORTED +#define PNG_BENIGN_READ_ERRORS_SUPPORTED +/*#undef PNG_BENIGN_WRITE_ERRORS_SUPPORTED*/ +#define PNG_BUILD_GRAYSCALE_PALETTE_SUPPORTED +#define PNG_CHECK_FOR_INVALID_INDEX_SUPPORTED +#define PNG_COLORSPACE_SUPPORTED +#define PNG_CONSOLE_IO_SUPPORTED +#define PNG_CONVERT_tIME_SUPPORTED +/*#undef PNG_DISABLE_ADLER32_CHECK_SUPPORTED*/ +#define PNG_EASY_ACCESS_SUPPORTED +/*#undef PNG_ERROR_NUMBERS_SUPPORTED*/ +#define PNG_ERROR_TEXT_SUPPORTED +#define PNG_FIXED_POINT_SUPPORTED +#define PNG_FLOATING_ARITHMETIC_SUPPORTED +#define PNG_FLOATING_POINT_SUPPORTED +#define PNG_FORMAT_AFIRST_SUPPORTED +#define PNG_FORMAT_BGR_SUPPORTED +#define PNG_GAMMA_SUPPORTED +#define PNG_GET_PALETTE_MAX_SUPPORTED +#define PNG_HANDLE_AS_UNKNOWN_SUPPORTED +#define PNG_INCH_CONVERSIONS_SUPPORTED +#define PNG_INFO_IMAGE_SUPPORTED +#define PNG_IO_STATE_SUPPORTED +/*#undef PNG_MIPS_MMI_API_SUPPORTED*/ +/*#undef PNG_MIPS_MMI_CHECK_SUPPORTED*/ +/*#undef PNG_MIPS_MSA_API_SUPPORTED*/ +/*#undef PNG_MIPS_MSA_CHECK_SUPPORTED*/ +#define PNG_MNG_FEATURES_SUPPORTED +#define PNG_POINTER_INDEXING_SUPPORTED +/*#undef PNG_POWERPC_VSX_API_SUPPORTED*/ +/*#undef PNG_POWERPC_VSX_CHECK_SUPPORTED*/ +#define PNG_PROGRESSIVE_READ_SUPPORTED +#define PNG_READ_16BIT_SUPPORTED +#define PNG_READ_ALPHA_MODE_SUPPORTED +#define PNG_READ_ANCILLARY_CHUNKS_SUPPORTED +#define PNG_READ_BACKGROUND_SUPPORTED +#define PNG_READ_BGR_SUPPORTED +#define PNG_READ_CHECK_FOR_INVALID_INDEX_SUPPORTED +#define PNG_READ_COMPOSITE_NODIV_SUPPORTED +#define PNG_READ_COMPRESSED_TEXT_SUPPORTED +#define PNG_READ_EXPAND_16_SUPPORTED +#define PNG_READ_EXPAND_SUPPORTED +#define PNG_READ_FILLER_SUPPORTED +#define PNG_READ_GAMMA_SUPPORTED +#define PNG_READ_GET_PALETTE_MAX_SUPPORTED +#define PNG_READ_GRAY_TO_RGB_SUPPORTED +#define PNG_READ_INTERLACING_SUPPORTED +#define PNG_READ_INT_FUNCTIONS_SUPPORTED +#define PNG_READ_INVERT_ALPHA_SUPPORTED +#define PNG_READ_INVERT_SUPPORTED +#define PNG_READ_OPT_PLTE_SUPPORTED +#define PNG_READ_PACKSWAP_SUPPORTED +#define PNG_READ_PACK_SUPPORTED +#define PNG_READ_QUANTIZE_SUPPORTED +#define PNG_READ_RGB_TO_GRAY_SUPPORTED +#define PNG_READ_SCALE_16_TO_8_SUPPORTED +#define PNG_READ_SHIFT_SUPPORTED +#define PNG_READ_STRIP_16_TO_8_SUPPORTED +#define PNG_READ_STRIP_ALPHA_SUPPORTED +#define PNG_READ_SUPPORTED +#define PNG_READ_SWAP_ALPHA_SUPPORTED +#define PNG_READ_SWAP_SUPPORTED +#define PNG_READ_TEXT_SUPPORTED +#define PNG_READ_TRANSFORMS_SUPPORTED +#define PNG_READ_UNKNOWN_CHUNKS_SUPPORTED +#define PNG_READ_USER_CHUNKS_SUPPORTED +#define PNG_READ_USER_TRANSFORM_SUPPORTED +#define PNG_READ_bKGD_SUPPORTED +#define PNG_READ_cHRM_SUPPORTED +#define PNG_READ_cICP_SUPPORTED +#define PNG_READ_cLLI_SUPPORTED +#define PNG_READ_eXIf_SUPPORTED +#define PNG_READ_gAMA_SUPPORTED +#define PNG_READ_hIST_SUPPORTED +#define PNG_READ_iCCP_SUPPORTED +#define PNG_READ_iTXt_SUPPORTED +#define PNG_READ_mDCV_SUPPORTED +#define PNG_READ_oFFs_SUPPORTED +#define PNG_READ_pCAL_SUPPORTED +#define PNG_READ_pHYs_SUPPORTED +#define PNG_READ_sBIT_SUPPORTED +#define PNG_READ_sCAL_SUPPORTED +#define PNG_READ_sPLT_SUPPORTED +#define PNG_READ_sRGB_SUPPORTED +#define PNG_READ_tEXt_SUPPORTED +#define PNG_READ_tIME_SUPPORTED +#define PNG_READ_tRNS_SUPPORTED +#define PNG_READ_zTXt_SUPPORTED +#define PNG_SAVE_INT_32_SUPPORTED +#define PNG_SAVE_UNKNOWN_CHUNKS_SUPPORTED +#define PNG_SEQUENTIAL_READ_SUPPORTED +#define PNG_SETJMP_SUPPORTED +#define PNG_SET_OPTION_SUPPORTED +#define PNG_SET_UNKNOWN_CHUNKS_SUPPORTED +#define PNG_SET_USER_LIMITS_SUPPORTED +#define PNG_SIMPLIFIED_READ_AFIRST_SUPPORTED +#define PNG_SIMPLIFIED_READ_BGR_SUPPORTED +#define PNG_SIMPLIFIED_READ_SUPPORTED +#define PNG_SIMPLIFIED_WRITE_AFIRST_SUPPORTED +#define PNG_SIMPLIFIED_WRITE_BGR_SUPPORTED +#define PNG_SIMPLIFIED_WRITE_STDIO_SUPPORTED +#define PNG_SIMPLIFIED_WRITE_SUPPORTED +#define PNG_STDIO_SUPPORTED +#define PNG_STORE_UNKNOWN_CHUNKS_SUPPORTED +#define PNG_TEXT_SUPPORTED +#define PNG_TIME_RFC1123_SUPPORTED +#define PNG_UNKNOWN_CHUNKS_SUPPORTED +#define PNG_USER_CHUNKS_SUPPORTED +#define PNG_USER_LIMITS_SUPPORTED +#define PNG_USER_MEM_SUPPORTED +#define PNG_USER_TRANSFORM_INFO_SUPPORTED +#define PNG_USER_TRANSFORM_PTR_SUPPORTED +#define PNG_WARNINGS_SUPPORTED +#define PNG_WRITE_16BIT_SUPPORTED +#define PNG_WRITE_ANCILLARY_CHUNKS_SUPPORTED +#define PNG_WRITE_BGR_SUPPORTED +#define PNG_WRITE_CHECK_FOR_INVALID_INDEX_SUPPORTED +#define PNG_WRITE_COMPRESSED_TEXT_SUPPORTED +#define PNG_WRITE_CUSTOMIZE_COMPRESSION_SUPPORTED +#define PNG_WRITE_CUSTOMIZE_ZTXT_COMPRESSION_SUPPORTED +#define PNG_WRITE_FILLER_SUPPORTED +#define PNG_WRITE_FILTER_SUPPORTED +#define PNG_WRITE_FLUSH_SUPPORTED +#define PNG_WRITE_GET_PALETTE_MAX_SUPPORTED +#define PNG_WRITE_INTERLACING_SUPPORTED +#define PNG_WRITE_INT_FUNCTIONS_SUPPORTED +#define PNG_WRITE_INVERT_ALPHA_SUPPORTED +#define PNG_WRITE_INVERT_SUPPORTED +#define PNG_WRITE_OPTIMIZE_CMF_SUPPORTED +#define PNG_WRITE_PACKSWAP_SUPPORTED +#define PNG_WRITE_PACK_SUPPORTED +#define PNG_WRITE_SHIFT_SUPPORTED +#define PNG_WRITE_SUPPORTED +#define PNG_WRITE_SWAP_ALPHA_SUPPORTED +#define PNG_WRITE_SWAP_SUPPORTED +#define PNG_WRITE_TEXT_SUPPORTED +#define PNG_WRITE_TRANSFORMS_SUPPORTED +#define PNG_WRITE_UNKNOWN_CHUNKS_SUPPORTED +#define PNG_WRITE_USER_TRANSFORM_SUPPORTED +#define PNG_WRITE_WEIGHTED_FILTER_SUPPORTED +#define PNG_WRITE_bKGD_SUPPORTED +#define PNG_WRITE_cHRM_SUPPORTED +#define PNG_WRITE_cICP_SUPPORTED +#define PNG_WRITE_cLLI_SUPPORTED +#define PNG_WRITE_eXIf_SUPPORTED +#define PNG_WRITE_gAMA_SUPPORTED +#define PNG_WRITE_hIST_SUPPORTED +#define PNG_WRITE_iCCP_SUPPORTED +#define PNG_WRITE_iTXt_SUPPORTED +#define PNG_WRITE_mDCV_SUPPORTED +#define PNG_WRITE_oFFs_SUPPORTED +#define PNG_WRITE_pCAL_SUPPORTED +#define PNG_WRITE_pHYs_SUPPORTED +#define PNG_WRITE_sBIT_SUPPORTED +#define PNG_WRITE_sCAL_SUPPORTED +#define PNG_WRITE_sPLT_SUPPORTED +#define PNG_WRITE_sRGB_SUPPORTED +#define PNG_WRITE_tEXt_SUPPORTED +#define PNG_WRITE_tIME_SUPPORTED +#define PNG_WRITE_tRNS_SUPPORTED +#define PNG_WRITE_zTXt_SUPPORTED +#define PNG_bKGD_SUPPORTED +#define PNG_cHRM_SUPPORTED +#define PNG_cICP_SUPPORTED +#define PNG_cLLI_SUPPORTED +#define PNG_eXIf_SUPPORTED +#define PNG_gAMA_SUPPORTED +#define PNG_hIST_SUPPORTED +#define PNG_iCCP_SUPPORTED +#define PNG_iTXt_SUPPORTED +#define PNG_mDCV_SUPPORTED +#define PNG_oFFs_SUPPORTED +#define PNG_pCAL_SUPPORTED +#define PNG_pHYs_SUPPORTED +#define PNG_sBIT_SUPPORTED +#define PNG_sCAL_SUPPORTED +#define PNG_sPLT_SUPPORTED +#define PNG_sRGB_SUPPORTED +#define PNG_tEXt_SUPPORTED +#define PNG_tIME_SUPPORTED +#define PNG_tRNS_SUPPORTED +#define PNG_zTXt_SUPPORTED +/* end of options */ +/* settings */ +#define PNG_API_RULE 0 +#define PNG_DEFAULT_READ_MACROS 1 +#define PNG_GAMMA_THRESHOLD_FIXED 5000 +#define PNG_IDAT_READ_SIZE PNG_ZBUF_SIZE +#define PNG_INFLATE_BUF_SIZE 1024 +#define PNG_LINKAGE_API extern +#define PNG_LINKAGE_CALLBACK extern +#define PNG_LINKAGE_DATA extern +#define PNG_LINKAGE_FUNCTION extern +#define PNG_MAX_GAMMA_8 11 +#define PNG_QUANTIZE_BLUE_BITS 5 +#define PNG_QUANTIZE_GREEN_BITS 5 +#define PNG_QUANTIZE_RED_BITS 5 +#define PNG_TEXT_Z_DEFAULT_COMPRESSION (-1) +#define PNG_TEXT_Z_DEFAULT_STRATEGY 0 +#define PNG_USER_CHUNK_CACHE_MAX 1000 +#define PNG_USER_CHUNK_MALLOC_MAX 8000000 +#define PNG_USER_HEIGHT_MAX 1000000 +#define PNG_USER_WIDTH_MAX 1000000 +#define PNG_ZBUF_SIZE 8192 +#define PNG_ZLIB_VERNUM 0x1310 +#define PNG_Z_DEFAULT_COMPRESSION (-1) +#define PNG_Z_DEFAULT_NOFILTER_STRATEGY 0 +#define PNG_Z_DEFAULT_STRATEGY 1 +#define PNG_sCAL_PRECISION 5 +#define PNG_sRGB_PROFILE_CHECKS 2 +/* end of settings */ +#endif /* PNGLCONF_H */ diff --git a/dependencies/winx64/include/zconf.h b/dependencies/winx64/include/zconf.h new file mode 100644 index 0000000..cf801d3 --- /dev/null +++ b/dependencies/winx64/include/zconf.h @@ -0,0 +1,545 @@ +/* zconf.h -- configuration of the zlib compression library + * Copyright (C) 1995-2024 Jean-loup Gailly, Mark Adler + * For conditions of distribution and use, see copyright notice in zlib.h + */ + +/* @(#) $Id$ */ + +#ifndef ZCONF_H +#define ZCONF_H +/* #undef Z_PREFIX */ +#define Z_HAVE_UNISTD_H + +/* + * If you *really* need a unique prefix for all types and library functions, + * compile with -DZ_PREFIX. The "standard" zlib should be compiled without it. + * Even better than compiling with -DZ_PREFIX would be to use configure to set + * this permanently in zconf.h using "./configure --zprefix". + */ +#ifdef Z_PREFIX /* may be set to #if 1 by ./configure */ +# define Z_PREFIX_SET + +/* all linked symbols and init macros */ +# define _dist_code z__dist_code +# define _length_code z__length_code +# define _tr_align z__tr_align +# define _tr_flush_bits z__tr_flush_bits +# define _tr_flush_block z__tr_flush_block +# define _tr_init z__tr_init +# define _tr_stored_block z__tr_stored_block +# define _tr_tally z__tr_tally +# define adler32 z_adler32 +# define adler32_combine z_adler32_combine +# define adler32_combine64 z_adler32_combine64 +# define adler32_z z_adler32_z +# ifndef Z_SOLO +# define compress z_compress +# define compress2 z_compress2 +# define compressBound z_compressBound +# endif +# define crc32 z_crc32 +# define crc32_combine z_crc32_combine +# define crc32_combine64 z_crc32_combine64 +# define crc32_combine_gen z_crc32_combine_gen +# define crc32_combine_gen64 z_crc32_combine_gen64 +# define crc32_combine_op z_crc32_combine_op +# define crc32_z z_crc32_z +# define deflate z_deflate +# define deflateBound z_deflateBound +# define deflateCopy z_deflateCopy +# define deflateEnd z_deflateEnd +# define deflateGetDictionary z_deflateGetDictionary +# define deflateInit z_deflateInit +# define deflateInit2 z_deflateInit2 +# define deflateInit2_ z_deflateInit2_ +# define deflateInit_ z_deflateInit_ +# define deflateParams z_deflateParams +# define deflatePending z_deflatePending +# define deflatePrime z_deflatePrime +# define deflateReset z_deflateReset +# define deflateResetKeep z_deflateResetKeep +# define deflateSetDictionary z_deflateSetDictionary +# define deflateSetHeader z_deflateSetHeader +# define deflateTune z_deflateTune +# define deflate_copyright z_deflate_copyright +# define get_crc_table z_get_crc_table +# ifndef Z_SOLO +# define gz_error z_gz_error +# define gz_intmax z_gz_intmax +# define gz_strwinerror z_gz_strwinerror +# define gzbuffer z_gzbuffer +# define gzclearerr z_gzclearerr +# define gzclose z_gzclose +# define gzclose_r z_gzclose_r +# define gzclose_w z_gzclose_w +# define gzdirect z_gzdirect +# define gzdopen z_gzdopen +# define gzeof z_gzeof +# define gzerror z_gzerror +# define gzflush z_gzflush +# define gzfread z_gzfread +# define gzfwrite z_gzfwrite +# define gzgetc z_gzgetc +# define gzgetc_ z_gzgetc_ +# define gzgets z_gzgets +# define gzoffset z_gzoffset +# define gzoffset64 z_gzoffset64 +# define gzopen z_gzopen +# define gzopen64 z_gzopen64 +# ifdef _WIN32 +# define gzopen_w z_gzopen_w +# endif +# define gzprintf z_gzprintf +# define gzputc z_gzputc +# define gzputs z_gzputs +# define gzread z_gzread +# define gzrewind z_gzrewind +# define gzseek z_gzseek +# define gzseek64 z_gzseek64 +# define gzsetparams z_gzsetparams +# define gztell z_gztell +# define gztell64 z_gztell64 +# define gzungetc z_gzungetc +# define gzvprintf z_gzvprintf +# define gzwrite z_gzwrite +# endif +# define inflate z_inflate +# define inflateBack z_inflateBack +# define inflateBackEnd z_inflateBackEnd +# define inflateBackInit z_inflateBackInit +# define inflateBackInit_ z_inflateBackInit_ +# define inflateCodesUsed z_inflateCodesUsed +# define inflateCopy z_inflateCopy +# define inflateEnd z_inflateEnd +# define inflateGetDictionary z_inflateGetDictionary +# define inflateGetHeader z_inflateGetHeader +# define inflateInit z_inflateInit +# define inflateInit2 z_inflateInit2 +# define inflateInit2_ z_inflateInit2_ +# define inflateInit_ z_inflateInit_ +# define inflateMark z_inflateMark +# define inflatePrime z_inflatePrime +# define inflateReset z_inflateReset +# define inflateReset2 z_inflateReset2 +# define inflateResetKeep z_inflateResetKeep +# define inflateSetDictionary z_inflateSetDictionary +# define inflateSync z_inflateSync +# define inflateSyncPoint z_inflateSyncPoint +# define inflateUndermine z_inflateUndermine +# define inflateValidate z_inflateValidate +# define inflate_copyright z_inflate_copyright +# define inflate_fast z_inflate_fast +# define inflate_table z_inflate_table +# ifndef Z_SOLO +# define uncompress z_uncompress +# define uncompress2 z_uncompress2 +# endif +# define zError z_zError +# ifndef Z_SOLO +# define zcalloc z_zcalloc +# define zcfree z_zcfree +# endif +# define zlibCompileFlags z_zlibCompileFlags +# define zlibVersion z_zlibVersion + +/* all zlib typedefs in zlib.h and zconf.h */ +# define Byte z_Byte +# define Bytef z_Bytef +# define alloc_func z_alloc_func +# define charf z_charf +# define free_func z_free_func +# ifndef Z_SOLO +# define gzFile z_gzFile +# endif +# define gz_header z_gz_header +# define gz_headerp z_gz_headerp +# define in_func z_in_func +# define intf z_intf +# define out_func z_out_func +# define uInt z_uInt +# define uIntf z_uIntf +# define uLong z_uLong +# define uLongf z_uLongf +# define voidp z_voidp +# define voidpc z_voidpc +# define voidpf z_voidpf + +/* all zlib structs in zlib.h and zconf.h */ +# define gz_header_s z_gz_header_s +# define internal_state z_internal_state + +#endif + +#if defined(__MSDOS__) && !defined(MSDOS) +# define MSDOS +#endif +#if (defined(OS_2) || defined(__OS2__)) && !defined(OS2) +# define OS2 +#endif +#if defined(_WINDOWS) && !defined(WINDOWS) +# define WINDOWS +#endif +#if defined(_WIN32) || defined(_WIN32_WCE) || defined(__WIN32__) +# ifndef WIN32 +# define WIN32 +# endif +#endif +#if (defined(MSDOS) || defined(OS2) || defined(WINDOWS)) && !defined(WIN32) +# if !defined(__GNUC__) && !defined(__FLAT__) && !defined(__386__) +# ifndef SYS16BIT +# define SYS16BIT +# endif +# endif +#endif + +/* + * Compile with -DMAXSEG_64K if the alloc function cannot allocate more + * than 64k bytes at a time (needed on systems with 16-bit int). + */ +#ifdef SYS16BIT +# define MAXSEG_64K +#endif +#ifdef MSDOS +# define UNALIGNED_OK +#endif + +#ifdef __STDC_VERSION__ +# ifndef STDC +# define STDC +# endif +# if __STDC_VERSION__ >= 199901L +# ifndef STDC99 +# define STDC99 +# endif +# endif +#endif +#if !defined(STDC) && (defined(__STDC__) || defined(__cplusplus)) +# define STDC +#endif +#if !defined(STDC) && (defined(__GNUC__) || defined(__BORLANDC__)) +# define STDC +#endif +#if !defined(STDC) && (defined(MSDOS) || defined(WINDOWS) || defined(WIN32)) +# define STDC +#endif +#if !defined(STDC) && (defined(OS2) || defined(__HOS_AIX__)) +# define STDC +#endif + +#if defined(__OS400__) && !defined(STDC) /* iSeries (formerly AS/400). */ +# define STDC +#endif + +#ifndef STDC +# ifndef const /* cannot use !defined(STDC) && !defined(const) on Mac */ +# define const /* note: need a more gentle solution here */ +# endif +#endif + +#if defined(ZLIB_CONST) && !defined(z_const) +# define z_const const +#else +# define z_const +#endif + +#ifdef Z_SOLO +# ifdef _WIN64 + typedef unsigned long long z_size_t; +# else + typedef unsigned long z_size_t; +# endif +#else +# define z_longlong long long +# if defined(NO_SIZE_T) + typedef unsigned NO_SIZE_T z_size_t; +# elif defined(STDC) +# include + typedef size_t z_size_t; +# else + typedef unsigned long z_size_t; +# endif +# undef z_longlong +#endif + +/* Maximum value for memLevel in deflateInit2 */ +#ifndef MAX_MEM_LEVEL +# ifdef MAXSEG_64K +# define MAX_MEM_LEVEL 8 +# else +# define MAX_MEM_LEVEL 9 +# endif +#endif + +/* Maximum value for windowBits in deflateInit2 and inflateInit2. + * WARNING: reducing MAX_WBITS makes minigzip unable to extract .gz files + * created by gzip. (Files created by minigzip can still be extracted by + * gzip.) + */ +#ifndef MAX_WBITS +# define MAX_WBITS 15 /* 32K LZ77 window */ +#endif + +/* The memory requirements for deflate are (in bytes): + (1 << (windowBits+2)) + (1 << (memLevel+9)) + that is: 128K for windowBits=15 + 128K for memLevel = 8 (default values) + plus a few kilobytes for small objects. For example, if you want to reduce + the default memory requirements from 256K to 128K, compile with + make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7" + Of course this will generally degrade compression (there's no free lunch). + + The memory requirements for inflate are (in bytes) 1 << windowBits + that is, 32K for windowBits=15 (default value) plus about 7 kilobytes + for small objects. +*/ + + /* Type declarations */ + +#ifndef OF /* function prototypes */ +# ifdef STDC +# define OF(args) args +# else +# define OF(args) () +# endif +#endif + +/* The following definitions for FAR are needed only for MSDOS mixed + * model programming (small or medium model with some far allocations). + * This was tested only with MSC; for other MSDOS compilers you may have + * to define NO_MEMCPY in zutil.h. If you don't need the mixed model, + * just define FAR to be empty. + */ +#ifdef SYS16BIT +# if defined(M_I86SM) || defined(M_I86MM) + /* MSC small or medium model */ +# define SMALL_MEDIUM +# ifdef _MSC_VER +# define FAR _far +# else +# define FAR far +# endif +# endif +# if (defined(__SMALL__) || defined(__MEDIUM__)) + /* Turbo C small or medium model */ +# define SMALL_MEDIUM +# ifdef __BORLANDC__ +# define FAR _far +# else +# define FAR far +# endif +# endif +#endif + +#if defined(WINDOWS) || defined(WIN32) + /* If building or using zlib as a DLL, define ZLIB_DLL. + * This is not mandatory, but it offers a little performance increase. + */ +# ifdef ZLIB_DLL +# if defined(WIN32) && (!defined(__BORLANDC__) || (__BORLANDC__ >= 0x500)) +# ifdef ZLIB_INTERNAL +# define ZEXTERN extern __declspec(dllexport) +# else +# define ZEXTERN extern __declspec(dllimport) +# endif +# endif +# endif /* ZLIB_DLL */ + /* If building or using zlib with the WINAPI/WINAPIV calling convention, + * define ZLIB_WINAPI. + * Caution: the standard ZLIB1.DLL is NOT compiled using ZLIB_WINAPI. + */ +# ifdef ZLIB_WINAPI +# ifdef FAR +# undef FAR +# endif +# ifndef WIN32_LEAN_AND_MEAN +# define WIN32_LEAN_AND_MEAN +# endif +# include + /* No need for _export, use ZLIB.DEF instead. */ + /* For complete Windows compatibility, use WINAPI, not __stdcall. */ +# define ZEXPORT WINAPI +# ifdef WIN32 +# define ZEXPORTVA WINAPIV +# else +# define ZEXPORTVA FAR CDECL +# endif +# endif +#endif + +#if defined (__BEOS__) +# ifdef ZLIB_DLL +# ifdef ZLIB_INTERNAL +# define ZEXPORT __declspec(dllexport) +# define ZEXPORTVA __declspec(dllexport) +# else +# define ZEXPORT __declspec(dllimport) +# define ZEXPORTVA __declspec(dllimport) +# endif +# endif +#endif + +#ifndef ZEXTERN +# define ZEXTERN extern +#endif +#ifndef ZEXPORT +# define ZEXPORT +#endif +#ifndef ZEXPORTVA +# define ZEXPORTVA +#endif + +#ifndef FAR +# define FAR +#endif + +#if !defined(__MACTYPES__) +typedef unsigned char Byte; /* 8 bits */ +#endif +typedef unsigned int uInt; /* 16 bits or more */ +typedef unsigned long uLong; /* 32 bits or more */ + +#ifdef SMALL_MEDIUM + /* Borland C/C++ and some old MSC versions ignore FAR inside typedef */ +# define Bytef Byte FAR +#else + typedef Byte FAR Bytef; +#endif +typedef char FAR charf; +typedef int FAR intf; +typedef uInt FAR uIntf; +typedef uLong FAR uLongf; + +#ifdef STDC + typedef void const *voidpc; + typedef void FAR *voidpf; + typedef void *voidp; +#else + typedef Byte const *voidpc; + typedef Byte FAR *voidpf; + typedef Byte *voidp; +#endif + +#if !defined(Z_U4) && !defined(Z_SOLO) && defined(STDC) +# include +# if (UINT_MAX == 0xffffffffUL) +# define Z_U4 unsigned +# elif (ULONG_MAX == 0xffffffffUL) +# define Z_U4 unsigned long +# elif (USHRT_MAX == 0xffffffffUL) +# define Z_U4 unsigned short +# endif +#endif + +#ifdef Z_U4 + typedef Z_U4 z_crc_t; +#else + typedef unsigned long z_crc_t; +#endif + +#ifdef HAVE_UNISTD_H /* may be set to #if 1 by ./configure */ +# define Z_HAVE_UNISTD_H +#endif + +#ifdef HAVE_STDARG_H /* may be set to #if 1 by ./configure */ +# define Z_HAVE_STDARG_H +#endif + +#ifdef STDC +# ifndef Z_SOLO +# include /* for off_t */ +# endif +#endif + +#if defined(STDC) || defined(Z_HAVE_STDARG_H) +# ifndef Z_SOLO +# include /* for va_list */ +# endif +#endif + +#ifdef _WIN32 +# ifndef Z_SOLO +# include /* for wchar_t */ +# endif +#endif + +/* a little trick to accommodate both "#define _LARGEFILE64_SOURCE" and + * "#define _LARGEFILE64_SOURCE 1" as requesting 64-bit operations, (even + * though the former does not conform to the LFS document), but considering + * both "#undef _LARGEFILE64_SOURCE" and "#define _LARGEFILE64_SOURCE 0" as + * equivalently requesting no 64-bit operations + */ +#if defined(_LARGEFILE64_SOURCE) && -_LARGEFILE64_SOURCE - -1 == 1 +# undef _LARGEFILE64_SOURCE +#endif + +#ifndef Z_HAVE_UNISTD_H +# ifdef __WATCOMC__ +# define Z_HAVE_UNISTD_H +# endif +#endif +#ifndef Z_HAVE_UNISTD_H +# if defined(_LARGEFILE64_SOURCE) && !defined(_WIN32) +# define Z_HAVE_UNISTD_H +# endif +#endif +#ifndef Z_SOLO +# if defined(Z_HAVE_UNISTD_H) +# include /* for SEEK_*, off_t, and _LFS64_LARGEFILE */ +# ifdef VMS +# include /* for off_t */ +# endif +# ifndef z_off_t +# define z_off_t off_t +# endif +# endif +#endif + +#if defined(_LFS64_LARGEFILE) && _LFS64_LARGEFILE-0 +# define Z_LFS64 +#endif + +#if defined(_LARGEFILE64_SOURCE) && defined(Z_LFS64) +# define Z_LARGE64 +#endif + +#if defined(_FILE_OFFSET_BITS) && _FILE_OFFSET_BITS-0 == 64 && defined(Z_LFS64) +# define Z_WANT64 +#endif + +#if !defined(SEEK_SET) && !defined(Z_SOLO) +# define SEEK_SET 0 /* Seek from beginning of file. */ +# define SEEK_CUR 1 /* Seek from current position. */ +# define SEEK_END 2 /* Set file pointer to EOF plus "offset" */ +#endif + +#ifndef z_off_t +# define z_off_t long +#endif + +#if !defined(_WIN32) && defined(Z_LARGE64) +# define z_off64_t off64_t +#else +# if defined(_WIN32) && !defined(__GNUC__) +# define z_off64_t __int64 +# else +# define z_off64_t z_off_t +# endif +#endif + +/* MVS linker does not support external names larger than 8 bytes */ +#if defined(__MVS__) + #pragma map(deflateInit_,"DEIN") + #pragma map(deflateInit2_,"DEIN2") + #pragma map(deflateEnd,"DEEND") + #pragma map(deflateBound,"DEBND") + #pragma map(inflateInit_,"ININ") + #pragma map(inflateInit2_,"ININ2") + #pragma map(inflateEnd,"INEND") + #pragma map(inflateSync,"INSY") + #pragma map(inflateSetDictionary,"INSEDI") + #pragma map(compressBound,"CMBND") + #pragma map(inflate_table,"INTABL") + #pragma map(inflate_fast,"INFA") + #pragma map(inflate_copyright,"INCOPY") +#endif + +#endif /* ZCONF_H */ diff --git a/dependencies/winx64/include/zdict.h b/dependencies/winx64/include/zdict.h new file mode 100644 index 0000000..599b793 --- /dev/null +++ b/dependencies/winx64/include/zdict.h @@ -0,0 +1,481 @@ +/* + * Copyright (c) Meta Platforms, Inc. and affiliates. + * All rights reserved. + * + * This source code is licensed under both the BSD-style license (found in the + * LICENSE file in the root directory of this source tree) and the GPLv2 (found + * in the COPYING file in the root directory of this source tree). + * You may select, at your option, one of the above-listed licenses. + */ + +#ifndef ZSTD_ZDICT_H +#define ZSTD_ZDICT_H + + +/*====== Dependencies ======*/ +#include /* size_t */ + +#if defined (__cplusplus) +extern "C" { +#endif + +/* ===== ZDICTLIB_API : control library symbols visibility ===== */ +#ifndef ZDICTLIB_VISIBLE + /* Backwards compatibility with old macro name */ +# ifdef ZDICTLIB_VISIBILITY +# define ZDICTLIB_VISIBLE ZDICTLIB_VISIBILITY +# elif defined(__GNUC__) && (__GNUC__ >= 4) && !defined(__MINGW32__) +# define ZDICTLIB_VISIBLE __attribute__ ((visibility ("default"))) +# else +# define ZDICTLIB_VISIBLE +# endif +#endif + +#ifndef ZDICTLIB_HIDDEN +# if defined(__GNUC__) && (__GNUC__ >= 4) && !defined(__MINGW32__) +# define ZDICTLIB_HIDDEN __attribute__ ((visibility ("hidden"))) +# else +# define ZDICTLIB_HIDDEN +# endif +#endif + +#if defined(ZSTD_DLL_EXPORT) && (ZSTD_DLL_EXPORT==1) +# define ZDICTLIB_API __declspec(dllexport) ZDICTLIB_VISIBLE +#elif defined(ZSTD_DLL_IMPORT) && (ZSTD_DLL_IMPORT==1) +# define ZDICTLIB_API __declspec(dllimport) ZDICTLIB_VISIBLE /* It isn't required but allows to generate better code, saving a function pointer load from the IAT and an indirect jump.*/ +#else +# define ZDICTLIB_API ZDICTLIB_VISIBLE +#endif + +/******************************************************************************* + * Zstd dictionary builder + * + * FAQ + * === + * Why should I use a dictionary? + * ------------------------------ + * + * Zstd can use dictionaries to improve compression ratio of small data. + * Traditionally small files don't compress well because there is very little + * repetition in a single sample, since it is small. But, if you are compressing + * many similar files, like a bunch of JSON records that share the same + * structure, you can train a dictionary on ahead of time on some samples of + * these files. Then, zstd can use the dictionary to find repetitions that are + * present across samples. This can vastly improve compression ratio. + * + * When is a dictionary useful? + * ---------------------------- + * + * Dictionaries are useful when compressing many small files that are similar. + * The larger a file is, the less benefit a dictionary will have. Generally, + * we don't expect dictionary compression to be effective past 100KB. And the + * smaller a file is, the more we would expect the dictionary to help. + * + * How do I use a dictionary? + * -------------------------- + * + * Simply pass the dictionary to the zstd compressor with + * `ZSTD_CCtx_loadDictionary()`. The same dictionary must then be passed to + * the decompressor, using `ZSTD_DCtx_loadDictionary()`. There are other + * more advanced functions that allow selecting some options, see zstd.h for + * complete documentation. + * + * What is a zstd dictionary? + * -------------------------- + * + * A zstd dictionary has two pieces: Its header, and its content. The header + * contains a magic number, the dictionary ID, and entropy tables. These + * entropy tables allow zstd to save on header costs in the compressed file, + * which really matters for small data. The content is just bytes, which are + * repeated content that is common across many samples. + * + * What is a raw content dictionary? + * --------------------------------- + * + * A raw content dictionary is just bytes. It doesn't have a zstd dictionary + * header, a dictionary ID, or entropy tables. Any buffer is a valid raw + * content dictionary. + * + * How do I train a dictionary? + * ---------------------------- + * + * Gather samples from your use case. These samples should be similar to each + * other. If you have several use cases, you could try to train one dictionary + * per use case. + * + * Pass those samples to `ZDICT_trainFromBuffer()` and that will train your + * dictionary. There are a few advanced versions of this function, but this + * is a great starting point. If you want to further tune your dictionary + * you could try `ZDICT_optimizeTrainFromBuffer_cover()`. If that is too slow + * you can try `ZDICT_optimizeTrainFromBuffer_fastCover()`. + * + * If the dictionary training function fails, that is likely because you + * either passed too few samples, or a dictionary would not be effective + * for your data. Look at the messages that the dictionary trainer printed, + * if it doesn't say too few samples, then a dictionary would not be effective. + * + * How large should my dictionary be? + * ---------------------------------- + * + * A reasonable dictionary size, the `dictBufferCapacity`, is about 100KB. + * The zstd CLI defaults to a 110KB dictionary. You likely don't need a + * dictionary larger than that. But, most use cases can get away with a + * smaller dictionary. The advanced dictionary builders can automatically + * shrink the dictionary for you, and select the smallest size that doesn't + * hurt compression ratio too much. See the `shrinkDict` parameter. + * A smaller dictionary can save memory, and potentially speed up + * compression. + * + * How many samples should I provide to the dictionary builder? + * ------------------------------------------------------------ + * + * We generally recommend passing ~100x the size of the dictionary + * in samples. A few thousand should suffice. Having too few samples + * can hurt the dictionaries effectiveness. Having more samples will + * only improve the dictionaries effectiveness. But having too many + * samples can slow down the dictionary builder. + * + * How do I determine if a dictionary will be effective? + * ----------------------------------------------------- + * + * Simply train a dictionary and try it out. You can use zstd's built in + * benchmarking tool to test the dictionary effectiveness. + * + * # Benchmark levels 1-3 without a dictionary + * zstd -b1e3 -r /path/to/my/files + * # Benchmark levels 1-3 with a dictionary + * zstd -b1e3 -r /path/to/my/files -D /path/to/my/dictionary + * + * When should I retrain a dictionary? + * ----------------------------------- + * + * You should retrain a dictionary when its effectiveness drops. Dictionary + * effectiveness drops as the data you are compressing changes. Generally, we do + * expect dictionaries to "decay" over time, as your data changes, but the rate + * at which they decay depends on your use case. Internally, we regularly + * retrain dictionaries, and if the new dictionary performs significantly + * better than the old dictionary, we will ship the new dictionary. + * + * I have a raw content dictionary, how do I turn it into a zstd dictionary? + * ------------------------------------------------------------------------- + * + * If you have a raw content dictionary, e.g. by manually constructing it, or + * using a third-party dictionary builder, you can turn it into a zstd + * dictionary by using `ZDICT_finalizeDictionary()`. You'll also have to + * provide some samples of the data. It will add the zstd header to the + * raw content, which contains a dictionary ID and entropy tables, which + * will improve compression ratio, and allow zstd to write the dictionary ID + * into the frame, if you so choose. + * + * Do I have to use zstd's dictionary builder? + * ------------------------------------------- + * + * No! You can construct dictionary content however you please, it is just + * bytes. It will always be valid as a raw content dictionary. If you want + * a zstd dictionary, which can improve compression ratio, use + * `ZDICT_finalizeDictionary()`. + * + * What is the attack surface of a zstd dictionary? + * ------------------------------------------------ + * + * Zstd is heavily fuzz tested, including loading fuzzed dictionaries, so + * zstd should never crash, or access out-of-bounds memory no matter what + * the dictionary is. However, if an attacker can control the dictionary + * during decompression, they can cause zstd to generate arbitrary bytes, + * just like if they controlled the compressed data. + * + ******************************************************************************/ + + +/*! ZDICT_trainFromBuffer(): + * Train a dictionary from an array of samples. + * Redirect towards ZDICT_optimizeTrainFromBuffer_fastCover() single-threaded, with d=8, steps=4, + * f=20, and accel=1. + * Samples must be stored concatenated in a single flat buffer `samplesBuffer`, + * supplied with an array of sizes `samplesSizes`, providing the size of each sample, in order. + * The resulting dictionary will be saved into `dictBuffer`. + * @return: size of dictionary stored into `dictBuffer` (<= `dictBufferCapacity`) + * or an error code, which can be tested with ZDICT_isError(). + * Note: Dictionary training will fail if there are not enough samples to construct a + * dictionary, or if most of the samples are too small (< 8 bytes being the lower limit). + * If dictionary training fails, you should use zstd without a dictionary, as the dictionary + * would've been ineffective anyways. If you believe your samples would benefit from a dictionary + * please open an issue with details, and we can look into it. + * Note: ZDICT_trainFromBuffer()'s memory usage is about 6 MB. + * Tips: In general, a reasonable dictionary has a size of ~ 100 KB. + * It's possible to select smaller or larger size, just by specifying `dictBufferCapacity`. + * In general, it's recommended to provide a few thousands samples, though this can vary a lot. + * It's recommended that total size of all samples be about ~x100 times the target size of dictionary. + */ +ZDICTLIB_API size_t ZDICT_trainFromBuffer(void* dictBuffer, size_t dictBufferCapacity, + const void* samplesBuffer, + const size_t* samplesSizes, unsigned nbSamples); + +typedef struct { + int compressionLevel; /**< optimize for a specific zstd compression level; 0 means default */ + unsigned notificationLevel; /**< Write log to stderr; 0 = none (default); 1 = errors; 2 = progression; 3 = details; 4 = debug; */ + unsigned dictID; /**< force dictID value; 0 means auto mode (32-bits random value) + * NOTE: The zstd format reserves some dictionary IDs for future use. + * You may use them in private settings, but be warned that they + * may be used by zstd in a public dictionary registry in the future. + * These dictionary IDs are: + * - low range : <= 32767 + * - high range : >= (2^31) + */ +} ZDICT_params_t; + +/*! ZDICT_finalizeDictionary(): + * Given a custom content as a basis for dictionary, and a set of samples, + * finalize dictionary by adding headers and statistics according to the zstd + * dictionary format. + * + * Samples must be stored concatenated in a flat buffer `samplesBuffer`, + * supplied with an array of sizes `samplesSizes`, providing the size of each + * sample in order. The samples are used to construct the statistics, so they + * should be representative of what you will compress with this dictionary. + * + * The compression level can be set in `parameters`. You should pass the + * compression level you expect to use in production. The statistics for each + * compression level differ, so tuning the dictionary for the compression level + * can help quite a bit. + * + * You can set an explicit dictionary ID in `parameters`, or allow us to pick + * a random dictionary ID for you, but we can't guarantee no collisions. + * + * The dstDictBuffer and the dictContent may overlap, and the content will be + * appended to the end of the header. If the header + the content doesn't fit in + * maxDictSize the beginning of the content is truncated to make room, since it + * is presumed that the most profitable content is at the end of the dictionary, + * since that is the cheapest to reference. + * + * `maxDictSize` must be >= max(dictContentSize, ZDICT_DICTSIZE_MIN). + * + * @return: size of dictionary stored into `dstDictBuffer` (<= `maxDictSize`), + * or an error code, which can be tested by ZDICT_isError(). + * Note: ZDICT_finalizeDictionary() will push notifications into stderr if + * instructed to, using notificationLevel>0. + * NOTE: This function currently may fail in several edge cases including: + * * Not enough samples + * * Samples are uncompressible + * * Samples are all exactly the same + */ +ZDICTLIB_API size_t ZDICT_finalizeDictionary(void* dstDictBuffer, size_t maxDictSize, + const void* dictContent, size_t dictContentSize, + const void* samplesBuffer, const size_t* samplesSizes, unsigned nbSamples, + ZDICT_params_t parameters); + + +/*====== Helper functions ======*/ +ZDICTLIB_API unsigned ZDICT_getDictID(const void* dictBuffer, size_t dictSize); /**< extracts dictID; @return zero if error (not a valid dictionary) */ +ZDICTLIB_API size_t ZDICT_getDictHeaderSize(const void* dictBuffer, size_t dictSize); /* returns dict header size; returns a ZSTD error code on failure */ +ZDICTLIB_API unsigned ZDICT_isError(size_t errorCode); +ZDICTLIB_API const char* ZDICT_getErrorName(size_t errorCode); + +#if defined (__cplusplus) +} +#endif + +#endif /* ZSTD_ZDICT_H */ + +#if defined(ZDICT_STATIC_LINKING_ONLY) && !defined(ZSTD_ZDICT_H_STATIC) +#define ZSTD_ZDICT_H_STATIC + +#if defined (__cplusplus) +extern "C" { +#endif + +/* This can be overridden externally to hide static symbols. */ +#ifndef ZDICTLIB_STATIC_API +# if defined(ZSTD_DLL_EXPORT) && (ZSTD_DLL_EXPORT==1) +# define ZDICTLIB_STATIC_API __declspec(dllexport) ZDICTLIB_VISIBLE +# elif defined(ZSTD_DLL_IMPORT) && (ZSTD_DLL_IMPORT==1) +# define ZDICTLIB_STATIC_API __declspec(dllimport) ZDICTLIB_VISIBLE +# else +# define ZDICTLIB_STATIC_API ZDICTLIB_VISIBLE +# endif +#endif + +/* ==================================================================================== + * The definitions in this section are considered experimental. + * They should never be used with a dynamic library, as they may change in the future. + * They are provided for advanced usages. + * Use them only in association with static linking. + * ==================================================================================== */ + +#define ZDICT_DICTSIZE_MIN 256 +/* Deprecated: Remove in v1.6.0 */ +#define ZDICT_CONTENTSIZE_MIN 128 + +/*! ZDICT_cover_params_t: + * k and d are the only required parameters. + * For others, value 0 means default. + */ +typedef struct { + unsigned k; /* Segment size : constraint: 0 < k : Reasonable range [16, 2048+] */ + unsigned d; /* dmer size : constraint: 0 < d <= k : Reasonable range [6, 16] */ + unsigned steps; /* Number of steps : Only used for optimization : 0 means default (40) : Higher means more parameters checked */ + unsigned nbThreads; /* Number of threads : constraint: 0 < nbThreads : 1 means single-threaded : Only used for optimization : Ignored if ZSTD_MULTITHREAD is not defined */ + double splitPoint; /* Percentage of samples used for training: Only used for optimization : the first nbSamples * splitPoint samples will be used to training, the last nbSamples * (1 - splitPoint) samples will be used for testing, 0 means default (1.0), 1.0 when all samples are used for both training and testing */ + unsigned shrinkDict; /* Train dictionaries to shrink in size starting from the minimum size and selects the smallest dictionary that is shrinkDictMaxRegression% worse than the largest dictionary. 0 means no shrinking and 1 means shrinking */ + unsigned shrinkDictMaxRegression; /* Sets shrinkDictMaxRegression so that a smaller dictionary can be at worse shrinkDictMaxRegression% worse than the max dict size dictionary. */ + ZDICT_params_t zParams; +} ZDICT_cover_params_t; + +typedef struct { + unsigned k; /* Segment size : constraint: 0 < k : Reasonable range [16, 2048+] */ + unsigned d; /* dmer size : constraint: 0 < d <= k : Reasonable range [6, 16] */ + unsigned f; /* log of size of frequency array : constraint: 0 < f <= 31 : 1 means default(20)*/ + unsigned steps; /* Number of steps : Only used for optimization : 0 means default (40) : Higher means more parameters checked */ + unsigned nbThreads; /* Number of threads : constraint: 0 < nbThreads : 1 means single-threaded : Only used for optimization : Ignored if ZSTD_MULTITHREAD is not defined */ + double splitPoint; /* Percentage of samples used for training: Only used for optimization : the first nbSamples * splitPoint samples will be used to training, the last nbSamples * (1 - splitPoint) samples will be used for testing, 0 means default (0.75), 1.0 when all samples are used for both training and testing */ + unsigned accel; /* Acceleration level: constraint: 0 < accel <= 10, higher means faster and less accurate, 0 means default(1) */ + unsigned shrinkDict; /* Train dictionaries to shrink in size starting from the minimum size and selects the smallest dictionary that is shrinkDictMaxRegression% worse than the largest dictionary. 0 means no shrinking and 1 means shrinking */ + unsigned shrinkDictMaxRegression; /* Sets shrinkDictMaxRegression so that a smaller dictionary can be at worse shrinkDictMaxRegression% worse than the max dict size dictionary. */ + + ZDICT_params_t zParams; +} ZDICT_fastCover_params_t; + +/*! ZDICT_trainFromBuffer_cover(): + * Train a dictionary from an array of samples using the COVER algorithm. + * Samples must be stored concatenated in a single flat buffer `samplesBuffer`, + * supplied with an array of sizes `samplesSizes`, providing the size of each sample, in order. + * The resulting dictionary will be saved into `dictBuffer`. + * @return: size of dictionary stored into `dictBuffer` (<= `dictBufferCapacity`) + * or an error code, which can be tested with ZDICT_isError(). + * See ZDICT_trainFromBuffer() for details on failure modes. + * Note: ZDICT_trainFromBuffer_cover() requires about 9 bytes of memory for each input byte. + * Tips: In general, a reasonable dictionary has a size of ~ 100 KB. + * It's possible to select smaller or larger size, just by specifying `dictBufferCapacity`. + * In general, it's recommended to provide a few thousands samples, though this can vary a lot. + * It's recommended that total size of all samples be about ~x100 times the target size of dictionary. + */ +ZDICTLIB_STATIC_API size_t ZDICT_trainFromBuffer_cover( + void *dictBuffer, size_t dictBufferCapacity, + const void *samplesBuffer, const size_t *samplesSizes, unsigned nbSamples, + ZDICT_cover_params_t parameters); + +/*! ZDICT_optimizeTrainFromBuffer_cover(): + * The same requirements as above hold for all the parameters except `parameters`. + * This function tries many parameter combinations and picks the best parameters. + * `*parameters` is filled with the best parameters found, + * dictionary constructed with those parameters is stored in `dictBuffer`. + * + * All of the parameters d, k, steps are optional. + * If d is non-zero then we don't check multiple values of d, otherwise we check d = {6, 8}. + * if steps is zero it defaults to its default value. + * If k is non-zero then we don't check multiple values of k, otherwise we check steps values in [50, 2000]. + * + * @return: size of dictionary stored into `dictBuffer` (<= `dictBufferCapacity`) + * or an error code, which can be tested with ZDICT_isError(). + * On success `*parameters` contains the parameters selected. + * See ZDICT_trainFromBuffer() for details on failure modes. + * Note: ZDICT_optimizeTrainFromBuffer_cover() requires about 8 bytes of memory for each input byte and additionally another 5 bytes of memory for each byte of memory for each thread. + */ +ZDICTLIB_STATIC_API size_t ZDICT_optimizeTrainFromBuffer_cover( + void* dictBuffer, size_t dictBufferCapacity, + const void* samplesBuffer, const size_t* samplesSizes, unsigned nbSamples, + ZDICT_cover_params_t* parameters); + +/*! ZDICT_trainFromBuffer_fastCover(): + * Train a dictionary from an array of samples using a modified version of COVER algorithm. + * Samples must be stored concatenated in a single flat buffer `samplesBuffer`, + * supplied with an array of sizes `samplesSizes`, providing the size of each sample, in order. + * d and k are required. + * All other parameters are optional, will use default values if not provided + * The resulting dictionary will be saved into `dictBuffer`. + * @return: size of dictionary stored into `dictBuffer` (<= `dictBufferCapacity`) + * or an error code, which can be tested with ZDICT_isError(). + * See ZDICT_trainFromBuffer() for details on failure modes. + * Note: ZDICT_trainFromBuffer_fastCover() requires 6 * 2^f bytes of memory. + * Tips: In general, a reasonable dictionary has a size of ~ 100 KB. + * It's possible to select smaller or larger size, just by specifying `dictBufferCapacity`. + * In general, it's recommended to provide a few thousands samples, though this can vary a lot. + * It's recommended that total size of all samples be about ~x100 times the target size of dictionary. + */ +ZDICTLIB_STATIC_API size_t ZDICT_trainFromBuffer_fastCover(void *dictBuffer, + size_t dictBufferCapacity, const void *samplesBuffer, + const size_t *samplesSizes, unsigned nbSamples, + ZDICT_fastCover_params_t parameters); + +/*! ZDICT_optimizeTrainFromBuffer_fastCover(): + * The same requirements as above hold for all the parameters except `parameters`. + * This function tries many parameter combinations (specifically, k and d combinations) + * and picks the best parameters. `*parameters` is filled with the best parameters found, + * dictionary constructed with those parameters is stored in `dictBuffer`. + * All of the parameters d, k, steps, f, and accel are optional. + * If d is non-zero then we don't check multiple values of d, otherwise we check d = {6, 8}. + * if steps is zero it defaults to its default value. + * If k is non-zero then we don't check multiple values of k, otherwise we check steps values in [50, 2000]. + * If f is zero, default value of 20 is used. + * If accel is zero, default value of 1 is used. + * + * @return: size of dictionary stored into `dictBuffer` (<= `dictBufferCapacity`) + * or an error code, which can be tested with ZDICT_isError(). + * On success `*parameters` contains the parameters selected. + * See ZDICT_trainFromBuffer() for details on failure modes. + * Note: ZDICT_optimizeTrainFromBuffer_fastCover() requires about 6 * 2^f bytes of memory for each thread. + */ +ZDICTLIB_STATIC_API size_t ZDICT_optimizeTrainFromBuffer_fastCover(void* dictBuffer, + size_t dictBufferCapacity, const void* samplesBuffer, + const size_t* samplesSizes, unsigned nbSamples, + ZDICT_fastCover_params_t* parameters); + +typedef struct { + unsigned selectivityLevel; /* 0 means default; larger => select more => larger dictionary */ + ZDICT_params_t zParams; +} ZDICT_legacy_params_t; + +/*! ZDICT_trainFromBuffer_legacy(): + * Train a dictionary from an array of samples. + * Samples must be stored concatenated in a single flat buffer `samplesBuffer`, + * supplied with an array of sizes `samplesSizes`, providing the size of each sample, in order. + * The resulting dictionary will be saved into `dictBuffer`. + * `parameters` is optional and can be provided with values set to 0 to mean "default". + * @return: size of dictionary stored into `dictBuffer` (<= `dictBufferCapacity`) + * or an error code, which can be tested with ZDICT_isError(). + * See ZDICT_trainFromBuffer() for details on failure modes. + * Tips: In general, a reasonable dictionary has a size of ~ 100 KB. + * It's possible to select smaller or larger size, just by specifying `dictBufferCapacity`. + * In general, it's recommended to provide a few thousands samples, though this can vary a lot. + * It's recommended that total size of all samples be about ~x100 times the target size of dictionary. + * Note: ZDICT_trainFromBuffer_legacy() will send notifications into stderr if instructed to, using notificationLevel>0. + */ +ZDICTLIB_STATIC_API size_t ZDICT_trainFromBuffer_legacy( + void* dictBuffer, size_t dictBufferCapacity, + const void* samplesBuffer, const size_t* samplesSizes, unsigned nbSamples, + ZDICT_legacy_params_t parameters); + + +/* Deprecation warnings */ +/* It is generally possible to disable deprecation warnings from compiler, + for example with -Wno-deprecated-declarations for gcc + or _CRT_SECURE_NO_WARNINGS in Visual. + Otherwise, it's also possible to manually define ZDICT_DISABLE_DEPRECATE_WARNINGS */ +#ifdef ZDICT_DISABLE_DEPRECATE_WARNINGS +# define ZDICT_DEPRECATED(message) /* disable deprecation warnings */ +#else +# define ZDICT_GCC_VERSION (__GNUC__ * 100 + __GNUC_MINOR__) +# if defined (__cplusplus) && (__cplusplus >= 201402) /* C++14 or greater */ +# define ZDICT_DEPRECATED(message) [[deprecated(message)]] +# elif defined(__clang__) || (ZDICT_GCC_VERSION >= 405) +# define ZDICT_DEPRECATED(message) __attribute__((deprecated(message))) +# elif (ZDICT_GCC_VERSION >= 301) +# define ZDICT_DEPRECATED(message) __attribute__((deprecated)) +# elif defined(_MSC_VER) +# define ZDICT_DEPRECATED(message) __declspec(deprecated(message)) +# else +# pragma message("WARNING: You need to implement ZDICT_DEPRECATED for this compiler") +# define ZDICT_DEPRECATED(message) +# endif +#endif /* ZDICT_DISABLE_DEPRECATE_WARNINGS */ + +ZDICT_DEPRECATED("use ZDICT_finalizeDictionary() instead") +ZDICTLIB_STATIC_API +size_t ZDICT_addEntropyTablesFromBuffer(void* dictBuffer, size_t dictContentSize, size_t dictBufferCapacity, + const void* samplesBuffer, const size_t* samplesSizes, unsigned nbSamples); + +#if defined (__cplusplus) +} +#endif + +#endif /* ZSTD_ZDICT_H_STATIC */ diff --git a/dependencies/winx64/include/zlib.h b/dependencies/winx64/include/zlib.h new file mode 100644 index 0000000..8d4b932 --- /dev/null +++ b/dependencies/winx64/include/zlib.h @@ -0,0 +1,1938 @@ +/* zlib.h -- interface of the 'zlib' general purpose compression library + version 1.3.1, January 22nd, 2024 + + Copyright (C) 1995-2024 Jean-loup Gailly and Mark Adler + + This software is provided 'as-is', without any express or implied + warranty. In no event will the authors be held liable for any damages + arising from the use of this software. + + Permission is granted to anyone to use this software for any purpose, + including commercial applications, and to alter it and redistribute it + freely, subject to the following restrictions: + + 1. The origin of this software must not be misrepresented; you must not + claim that you wrote the original software. If you use this software + in a product, an acknowledgment in the product documentation would be + appreciated but is not required. + 2. Altered source versions must be plainly marked as such, and must not be + misrepresented as being the original software. + 3. This notice may not be removed or altered from any source distribution. + + Jean-loup Gailly Mark Adler + jloup@gzip.org madler@alumni.caltech.edu + + + The data format used by the zlib library is described by RFCs (Request for + Comments) 1950 to 1952 in the files http://tools.ietf.org/html/rfc1950 + (zlib format), rfc1951 (deflate format) and rfc1952 (gzip format). +*/ + +#ifndef ZLIB_H +#define ZLIB_H + +#include "zconf.h" + +#ifdef __cplusplus +extern "C" { +#endif + +#define ZLIB_VERSION "1.3.1" +#define ZLIB_VERNUM 0x1310 +#define ZLIB_VER_MAJOR 1 +#define ZLIB_VER_MINOR 3 +#define ZLIB_VER_REVISION 1 +#define ZLIB_VER_SUBREVISION 0 + +/* + The 'zlib' compression library provides in-memory compression and + decompression functions, including integrity checks of the uncompressed data. + This version of the library supports only one compression method (deflation) + but other algorithms will be added later and will have the same stream + interface. + + Compression can be done in a single step if the buffers are large enough, + or can be done by repeated calls of the compression function. In the latter + case, the application must provide more input and/or consume the output + (providing more output space) before each call. + + The compressed data format used by default by the in-memory functions is + the zlib format, which is a zlib wrapper documented in RFC 1950, wrapped + around a deflate stream, which is itself documented in RFC 1951. + + The library also supports reading and writing files in gzip (.gz) format + with an interface similar to that of stdio using the functions that start + with "gz". The gzip format is different from the zlib format. gzip is a + gzip wrapper, documented in RFC 1952, wrapped around a deflate stream. + + This library can optionally read and write gzip and raw deflate streams in + memory as well. + + The zlib format was designed to be compact and fast for use in memory + and on communications channels. The gzip format was designed for single- + file compression on file systems, has a larger header than zlib to maintain + directory information, and uses a different, slower check method than zlib. + + The library does not install any signal handler. The decoder checks + the consistency of the compressed data, so the library should never crash + even in the case of corrupted input. +*/ + +typedef voidpf (*alloc_func)(voidpf opaque, uInt items, uInt size); +typedef void (*free_func)(voidpf opaque, voidpf address); + +struct internal_state; + +typedef struct z_stream_s { + z_const Bytef *next_in; /* next input byte */ + uInt avail_in; /* number of bytes available at next_in */ + uLong total_in; /* total number of input bytes read so far */ + + Bytef *next_out; /* next output byte will go here */ + uInt avail_out; /* remaining free space at next_out */ + uLong total_out; /* total number of bytes output so far */ + + z_const char *msg; /* last error message, NULL if no error */ + struct internal_state FAR *state; /* not visible by applications */ + + alloc_func zalloc; /* used to allocate the internal state */ + free_func zfree; /* used to free the internal state */ + voidpf opaque; /* private data object passed to zalloc and zfree */ + + int data_type; /* best guess about the data type: binary or text + for deflate, or the decoding state for inflate */ + uLong adler; /* Adler-32 or CRC-32 value of the uncompressed data */ + uLong reserved; /* reserved for future use */ +} z_stream; + +typedef z_stream FAR *z_streamp; + +/* + gzip header information passed to and from zlib routines. See RFC 1952 + for more details on the meanings of these fields. +*/ +typedef struct gz_header_s { + int text; /* true if compressed data believed to be text */ + uLong time; /* modification time */ + int xflags; /* extra flags (not used when writing a gzip file) */ + int os; /* operating system */ + Bytef *extra; /* pointer to extra field or Z_NULL if none */ + uInt extra_len; /* extra field length (valid if extra != Z_NULL) */ + uInt extra_max; /* space at extra (only when reading header) */ + Bytef *name; /* pointer to zero-terminated file name or Z_NULL */ + uInt name_max; /* space at name (only when reading header) */ + Bytef *comment; /* pointer to zero-terminated comment or Z_NULL */ + uInt comm_max; /* space at comment (only when reading header) */ + int hcrc; /* true if there was or will be a header crc */ + int done; /* true when done reading gzip header (not used + when writing a gzip file) */ +} gz_header; + +typedef gz_header FAR *gz_headerp; + +/* + The application must update next_in and avail_in when avail_in has dropped + to zero. It must update next_out and avail_out when avail_out has dropped + to zero. The application must initialize zalloc, zfree and opaque before + calling the init function. All other fields are set by the compression + library and must not be updated by the application. + + The opaque value provided by the application will be passed as the first + parameter for calls of zalloc and zfree. This can be useful for custom + memory management. The compression library attaches no meaning to the + opaque value. + + zalloc must return Z_NULL if there is not enough memory for the object. + If zlib is used in a multi-threaded application, zalloc and zfree must be + thread safe. In that case, zlib is thread-safe. When zalloc and zfree are + Z_NULL on entry to the initialization function, they are set to internal + routines that use the standard library functions malloc() and free(). + + On 16-bit systems, the functions zalloc and zfree must be able to allocate + exactly 65536 bytes, but will not be required to allocate more than this if + the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS, pointers + returned by zalloc for objects of exactly 65536 bytes *must* have their + offset normalized to zero. The default allocation function provided by this + library ensures this (see zutil.c). To reduce memory requirements and avoid + any allocation of 64K objects, at the expense of compression ratio, compile + the library with -DMAX_WBITS=14 (see zconf.h). + + The fields total_in and total_out can be used for statistics or progress + reports. After compression, total_in holds the total size of the + uncompressed data and may be saved for use by the decompressor (particularly + if the decompressor wants to decompress everything in a single step). +*/ + + /* constants */ + +#define Z_NO_FLUSH 0 +#define Z_PARTIAL_FLUSH 1 +#define Z_SYNC_FLUSH 2 +#define Z_FULL_FLUSH 3 +#define Z_FINISH 4 +#define Z_BLOCK 5 +#define Z_TREES 6 +/* Allowed flush values; see deflate() and inflate() below for details */ + +#define Z_OK 0 +#define Z_STREAM_END 1 +#define Z_NEED_DICT 2 +#define Z_ERRNO (-1) +#define Z_STREAM_ERROR (-2) +#define Z_DATA_ERROR (-3) +#define Z_MEM_ERROR (-4) +#define Z_BUF_ERROR (-5) +#define Z_VERSION_ERROR (-6) +/* Return codes for the compression/decompression functions. Negative values + * are errors, positive values are used for special but normal events. + */ + +#define Z_NO_COMPRESSION 0 +#define Z_BEST_SPEED 1 +#define Z_BEST_COMPRESSION 9 +#define Z_DEFAULT_COMPRESSION (-1) +/* compression levels */ + +#define Z_FILTERED 1 +#define Z_HUFFMAN_ONLY 2 +#define Z_RLE 3 +#define Z_FIXED 4 +#define Z_DEFAULT_STRATEGY 0 +/* compression strategy; see deflateInit2() below for details */ + +#define Z_BINARY 0 +#define Z_TEXT 1 +#define Z_ASCII Z_TEXT /* for compatibility with 1.2.2 and earlier */ +#define Z_UNKNOWN 2 +/* Possible values of the data_type field for deflate() */ + +#define Z_DEFLATED 8 +/* The deflate compression method (the only one supported in this version) */ + +#define Z_NULL 0 /* for initializing zalloc, zfree, opaque */ + +#define zlib_version zlibVersion() +/* for compatibility with versions < 1.0.2 */ + + + /* basic functions */ + +ZEXTERN const char * ZEXPORT zlibVersion(void); +/* The application can compare zlibVersion and ZLIB_VERSION for consistency. + If the first character differs, the library code actually used is not + compatible with the zlib.h header file used by the application. This check + is automatically made by deflateInit and inflateInit. + */ + +/* +ZEXTERN int ZEXPORT deflateInit(z_streamp strm, int level); + + Initializes the internal stream state for compression. The fields + zalloc, zfree and opaque must be initialized before by the caller. If + zalloc and zfree are set to Z_NULL, deflateInit updates them to use default + allocation functions. total_in, total_out, adler, and msg are initialized. + + The compression level must be Z_DEFAULT_COMPRESSION, or between 0 and 9: + 1 gives best speed, 9 gives best compression, 0 gives no compression at all + (the input data is simply copied a block at a time). Z_DEFAULT_COMPRESSION + requests a default compromise between speed and compression (currently + equivalent to level 6). + + deflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough + memory, Z_STREAM_ERROR if level is not a valid compression level, or + Z_VERSION_ERROR if the zlib library version (zlib_version) is incompatible + with the version assumed by the caller (ZLIB_VERSION). msg is set to null + if there is no error message. deflateInit does not perform any compression: + this will be done by deflate(). +*/ + + +ZEXTERN int ZEXPORT deflate(z_streamp strm, int flush); +/* + deflate compresses as much data as possible, and stops when the input + buffer becomes empty or the output buffer becomes full. It may introduce + some output latency (reading input without producing any output) except when + forced to flush. + + The detailed semantics are as follows. deflate performs one or both of the + following actions: + + - Compress more input starting at next_in and update next_in and avail_in + accordingly. If not all input can be processed (because there is not + enough room in the output buffer), next_in and avail_in are updated and + processing will resume at this point for the next call of deflate(). + + - Generate more output starting at next_out and update next_out and avail_out + accordingly. This action is forced if the parameter flush is non zero. + Forcing flush frequently degrades the compression ratio, so this parameter + should be set only when necessary. Some output may be provided even if + flush is zero. + + Before the call of deflate(), the application should ensure that at least + one of the actions is possible, by providing more input and/or consuming more + output, and updating avail_in or avail_out accordingly; avail_out should + never be zero before the call. The application can consume the compressed + output when it wants, for example when the output buffer is full (avail_out + == 0), or after each call of deflate(). If deflate returns Z_OK and with + zero avail_out, it must be called again after making room in the output + buffer because there might be more output pending. See deflatePending(), + which can be used if desired to determine whether or not there is more output + in that case. + + Normally the parameter flush is set to Z_NO_FLUSH, which allows deflate to + decide how much data to accumulate before producing output, in order to + maximize compression. + + If the parameter flush is set to Z_SYNC_FLUSH, all pending output is + flushed to the output buffer and the output is aligned on a byte boundary, so + that the decompressor can get all input data available so far. (In + particular avail_in is zero after the call if enough output space has been + provided before the call.) Flushing may degrade compression for some + compression algorithms and so it should be used only when necessary. This + completes the current deflate block and follows it with an empty stored block + that is three bits plus filler bits to the next byte, followed by four bytes + (00 00 ff ff). + + If flush is set to Z_PARTIAL_FLUSH, all pending output is flushed to the + output buffer, but the output is not aligned to a byte boundary. All of the + input data so far will be available to the decompressor, as for Z_SYNC_FLUSH. + This completes the current deflate block and follows it with an empty fixed + codes block that is 10 bits long. This assures that enough bytes are output + in order for the decompressor to finish the block before the empty fixed + codes block. + + If flush is set to Z_BLOCK, a deflate block is completed and emitted, as + for Z_SYNC_FLUSH, but the output is not aligned on a byte boundary, and up to + seven bits of the current block are held to be written as the next byte after + the next deflate block is completed. In this case, the decompressor may not + be provided enough bits at this point in order to complete decompression of + the data provided so far to the compressor. It may need to wait for the next + block to be emitted. This is for advanced applications that need to control + the emission of deflate blocks. + + If flush is set to Z_FULL_FLUSH, all output is flushed as with + Z_SYNC_FLUSH, and the compression state is reset so that decompression can + restart from this point if previous compressed data has been damaged or if + random access is desired. Using Z_FULL_FLUSH too often can seriously degrade + compression. + + If deflate returns with avail_out == 0, this function must be called again + with the same value of the flush parameter and more output space (updated + avail_out), until the flush is complete (deflate returns with non-zero + avail_out). In the case of a Z_FULL_FLUSH or Z_SYNC_FLUSH, make sure that + avail_out is greater than six when the flush marker begins, in order to avoid + repeated flush markers upon calling deflate() again when avail_out == 0. + + If the parameter flush is set to Z_FINISH, pending input is processed, + pending output is flushed and deflate returns with Z_STREAM_END if there was + enough output space. If deflate returns with Z_OK or Z_BUF_ERROR, this + function must be called again with Z_FINISH and more output space (updated + avail_out) but no more input data, until it returns with Z_STREAM_END or an + error. After deflate has returned Z_STREAM_END, the only possible operations + on the stream are deflateReset or deflateEnd. + + Z_FINISH can be used in the first deflate call after deflateInit if all the + compression is to be done in a single step. In order to complete in one + call, avail_out must be at least the value returned by deflateBound (see + below). Then deflate is guaranteed to return Z_STREAM_END. If not enough + output space is provided, deflate will not return Z_STREAM_END, and it must + be called again as described above. + + deflate() sets strm->adler to the Adler-32 checksum of all input read + so far (that is, total_in bytes). If a gzip stream is being generated, then + strm->adler will be the CRC-32 checksum of the input read so far. (See + deflateInit2 below.) + + deflate() may update strm->data_type if it can make a good guess about + the input data type (Z_BINARY or Z_TEXT). If in doubt, the data is + considered binary. This field is only for information purposes and does not + affect the compression algorithm in any manner. + + deflate() returns Z_OK if some progress has been made (more input + processed or more output produced), Z_STREAM_END if all input has been + consumed and all output has been produced (only when flush is set to + Z_FINISH), Z_STREAM_ERROR if the stream state was inconsistent (for example + if next_in or next_out was Z_NULL or the state was inadvertently written over + by the application), or Z_BUF_ERROR if no progress is possible (for example + avail_in or avail_out was zero). Note that Z_BUF_ERROR is not fatal, and + deflate() can be called again with more input and more output space to + continue compressing. +*/ + + +ZEXTERN int ZEXPORT deflateEnd(z_streamp strm); +/* + All dynamically allocated data structures for this stream are freed. + This function discards any unprocessed input and does not flush any pending + output. + + deflateEnd returns Z_OK if success, Z_STREAM_ERROR if the + stream state was inconsistent, Z_DATA_ERROR if the stream was freed + prematurely (some input or output was discarded). In the error case, msg + may be set but then points to a static string (which must not be + deallocated). +*/ + + +/* +ZEXTERN int ZEXPORT inflateInit(z_streamp strm); + + Initializes the internal stream state for decompression. The fields + next_in, avail_in, zalloc, zfree and opaque must be initialized before by + the caller. In the current version of inflate, the provided input is not + read or consumed. The allocation of a sliding window will be deferred to + the first call of inflate (if the decompression does not complete on the + first call). If zalloc and zfree are set to Z_NULL, inflateInit updates + them to use default allocation functions. total_in, total_out, adler, and + msg are initialized. + + inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not enough + memory, Z_VERSION_ERROR if the zlib library version is incompatible with the + version assumed by the caller, or Z_STREAM_ERROR if the parameters are + invalid, such as a null pointer to the structure. msg is set to null if + there is no error message. inflateInit does not perform any decompression. + Actual decompression will be done by inflate(). So next_in, and avail_in, + next_out, and avail_out are unused and unchanged. The current + implementation of inflateInit() does not process any header information -- + that is deferred until inflate() is called. +*/ + + +ZEXTERN int ZEXPORT inflate(z_streamp strm, int flush); +/* + inflate decompresses as much data as possible, and stops when the input + buffer becomes empty or the output buffer becomes full. It may introduce + some output latency (reading input without producing any output) except when + forced to flush. + + The detailed semantics are as follows. inflate performs one or both of the + following actions: + + - Decompress more input starting at next_in and update next_in and avail_in + accordingly. If not all input can be processed (because there is not + enough room in the output buffer), then next_in and avail_in are updated + accordingly, and processing will resume at this point for the next call of + inflate(). + + - Generate more output starting at next_out and update next_out and avail_out + accordingly. inflate() provides as much output as possible, until there is + no more input data or no more space in the output buffer (see below about + the flush parameter). + + Before the call of inflate(), the application should ensure that at least + one of the actions is possible, by providing more input and/or consuming more + output, and updating the next_* and avail_* values accordingly. If the + caller of inflate() does not provide both available input and available + output space, it is possible that there will be no progress made. The + application can consume the uncompressed output when it wants, for example + when the output buffer is full (avail_out == 0), or after each call of + inflate(). If inflate returns Z_OK and with zero avail_out, it must be + called again after making room in the output buffer because there might be + more output pending. + + The flush parameter of inflate() can be Z_NO_FLUSH, Z_SYNC_FLUSH, Z_FINISH, + Z_BLOCK, or Z_TREES. Z_SYNC_FLUSH requests that inflate() flush as much + output as possible to the output buffer. Z_BLOCK requests that inflate() + stop if and when it gets to the next deflate block boundary. When decoding + the zlib or gzip format, this will cause inflate() to return immediately + after the header and before the first block. When doing a raw inflate, + inflate() will go ahead and process the first block, and will return when it + gets to the end of that block, or when it runs out of data. + + The Z_BLOCK option assists in appending to or combining deflate streams. + To assist in this, on return inflate() always sets strm->data_type to the + number of unused bits in the last byte taken from strm->next_in, plus 64 if + inflate() is currently decoding the last block in the deflate stream, plus + 128 if inflate() returned immediately after decoding an end-of-block code or + decoding the complete header up to just before the first byte of the deflate + stream. The end-of-block will not be indicated until all of the uncompressed + data from that block has been written to strm->next_out. The number of + unused bits may in general be greater than seven, except when bit 7 of + data_type is set, in which case the number of unused bits will be less than + eight. data_type is set as noted here every time inflate() returns for all + flush options, and so can be used to determine the amount of currently + consumed input in bits. + + The Z_TREES option behaves as Z_BLOCK does, but it also returns when the + end of each deflate block header is reached, before any actual data in that + block is decoded. This allows the caller to determine the length of the + deflate block header for later use in random access within a deflate block. + 256 is added to the value of strm->data_type when inflate() returns + immediately after reaching the end of the deflate block header. + + inflate() should normally be called until it returns Z_STREAM_END or an + error. However if all decompression is to be performed in a single step (a + single call of inflate), the parameter flush should be set to Z_FINISH. In + this case all pending input is processed and all pending output is flushed; + avail_out must be large enough to hold all of the uncompressed data for the + operation to complete. (The size of the uncompressed data may have been + saved by the compressor for this purpose.) The use of Z_FINISH is not + required to perform an inflation in one step. However it may be used to + inform inflate that a faster approach can be used for the single inflate() + call. Z_FINISH also informs inflate to not maintain a sliding window if the + stream completes, which reduces inflate's memory footprint. If the stream + does not complete, either because not all of the stream is provided or not + enough output space is provided, then a sliding window will be allocated and + inflate() can be called again to continue the operation as if Z_NO_FLUSH had + been used. + + In this implementation, inflate() always flushes as much output as + possible to the output buffer, and always uses the faster approach on the + first call. So the effects of the flush parameter in this implementation are + on the return value of inflate() as noted below, when inflate() returns early + when Z_BLOCK or Z_TREES is used, and when inflate() avoids the allocation of + memory for a sliding window when Z_FINISH is used. + + If a preset dictionary is needed after this call (see inflateSetDictionary + below), inflate sets strm->adler to the Adler-32 checksum of the dictionary + chosen by the compressor and returns Z_NEED_DICT; otherwise it sets + strm->adler to the Adler-32 checksum of all output produced so far (that is, + total_out bytes) and returns Z_OK, Z_STREAM_END or an error code as described + below. At the end of the stream, inflate() checks that its computed Adler-32 + checksum is equal to that saved by the compressor and returns Z_STREAM_END + only if the checksum is correct. + + inflate() can decompress and check either zlib-wrapped or gzip-wrapped + deflate data. The header type is detected automatically, if requested when + initializing with inflateInit2(). Any information contained in the gzip + header is not retained unless inflateGetHeader() is used. When processing + gzip-wrapped deflate data, strm->adler32 is set to the CRC-32 of the output + produced so far. The CRC-32 is checked against the gzip trailer, as is the + uncompressed length, modulo 2^32. + + inflate() returns Z_OK if some progress has been made (more input processed + or more output produced), Z_STREAM_END if the end of the compressed data has + been reached and all uncompressed output has been produced, Z_NEED_DICT if a + preset dictionary is needed at this point, Z_DATA_ERROR if the input data was + corrupted (input stream not conforming to the zlib format or incorrect check + value, in which case strm->msg points to a string with a more specific + error), Z_STREAM_ERROR if the stream structure was inconsistent (for example + next_in or next_out was Z_NULL, or the state was inadvertently written over + by the application), Z_MEM_ERROR if there was not enough memory, Z_BUF_ERROR + if no progress was possible or if there was not enough room in the output + buffer when Z_FINISH is used. Note that Z_BUF_ERROR is not fatal, and + inflate() can be called again with more input and more output space to + continue decompressing. If Z_DATA_ERROR is returned, the application may + then call inflateSync() to look for a good compression block if a partial + recovery of the data is to be attempted. +*/ + + +ZEXTERN int ZEXPORT inflateEnd(z_streamp strm); +/* + All dynamically allocated data structures for this stream are freed. + This function discards any unprocessed input and does not flush any pending + output. + + inflateEnd returns Z_OK if success, or Z_STREAM_ERROR if the stream state + was inconsistent. +*/ + + + /* Advanced functions */ + +/* + The following functions are needed only in some special applications. +*/ + +/* +ZEXTERN int ZEXPORT deflateInit2(z_streamp strm, + int level, + int method, + int windowBits, + int memLevel, + int strategy); + + This is another version of deflateInit with more compression options. The + fields zalloc, zfree and opaque must be initialized before by the caller. + + The method parameter is the compression method. It must be Z_DEFLATED in + this version of the library. + + The windowBits parameter is the base two logarithm of the window size + (the size of the history buffer). It should be in the range 8..15 for this + version of the library. Larger values of this parameter result in better + compression at the expense of memory usage. The default value is 15 if + deflateInit is used instead. + + For the current implementation of deflate(), a windowBits value of 8 (a + window size of 256 bytes) is not supported. As a result, a request for 8 + will result in 9 (a 512-byte window). In that case, providing 8 to + inflateInit2() will result in an error when the zlib header with 9 is + checked against the initialization of inflate(). The remedy is to not use 8 + with deflateInit2() with this initialization, or at least in that case use 9 + with inflateInit2(). + + windowBits can also be -8..-15 for raw deflate. In this case, -windowBits + determines the window size. deflate() will then generate raw deflate data + with no zlib header or trailer, and will not compute a check value. + + windowBits can also be greater than 15 for optional gzip encoding. Add + 16 to windowBits to write a simple gzip header and trailer around the + compressed data instead of a zlib wrapper. The gzip header will have no + file name, no extra data, no comment, no modification time (set to zero), no + header crc, and the operating system will be set to the appropriate value, + if the operating system was determined at compile time. If a gzip stream is + being written, strm->adler is a CRC-32 instead of an Adler-32. + + For raw deflate or gzip encoding, a request for a 256-byte window is + rejected as invalid, since only the zlib header provides a means of + transmitting the window size to the decompressor. + + The memLevel parameter specifies how much memory should be allocated + for the internal compression state. memLevel=1 uses minimum memory but is + slow and reduces compression ratio; memLevel=9 uses maximum memory for + optimal speed. The default value is 8. See zconf.h for total memory usage + as a function of windowBits and memLevel. + + The strategy parameter is used to tune the compression algorithm. Use the + value Z_DEFAULT_STRATEGY for normal data, Z_FILTERED for data produced by a + filter (or predictor), Z_HUFFMAN_ONLY to force Huffman encoding only (no + string match), or Z_RLE to limit match distances to one (run-length + encoding). Filtered data consists mostly of small values with a somewhat + random distribution. In this case, the compression algorithm is tuned to + compress them better. The effect of Z_FILTERED is to force more Huffman + coding and less string matching; it is somewhat intermediate between + Z_DEFAULT_STRATEGY and Z_HUFFMAN_ONLY. Z_RLE is designed to be almost as + fast as Z_HUFFMAN_ONLY, but give better compression for PNG image data. The + strategy parameter only affects the compression ratio but not the + correctness of the compressed output even if it is not set appropriately. + Z_FIXED prevents the use of dynamic Huffman codes, allowing for a simpler + decoder for special applications. + + deflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough + memory, Z_STREAM_ERROR if any parameter is invalid (such as an invalid + method), or Z_VERSION_ERROR if the zlib library version (zlib_version) is + incompatible with the version assumed by the caller (ZLIB_VERSION). msg is + set to null if there is no error message. deflateInit2 does not perform any + compression: this will be done by deflate(). +*/ + +ZEXTERN int ZEXPORT deflateSetDictionary(z_streamp strm, + const Bytef *dictionary, + uInt dictLength); +/* + Initializes the compression dictionary from the given byte sequence + without producing any compressed output. When using the zlib format, this + function must be called immediately after deflateInit, deflateInit2 or + deflateReset, and before any call of deflate. When doing raw deflate, this + function must be called either before any call of deflate, or immediately + after the completion of a deflate block, i.e. after all input has been + consumed and all output has been delivered when using any of the flush + options Z_BLOCK, Z_PARTIAL_FLUSH, Z_SYNC_FLUSH, or Z_FULL_FLUSH. The + compressor and decompressor must use exactly the same dictionary (see + inflateSetDictionary). + + The dictionary should consist of strings (byte sequences) that are likely + to be encountered later in the data to be compressed, with the most commonly + used strings preferably put towards the end of the dictionary. Using a + dictionary is most useful when the data to be compressed is short and can be + predicted with good accuracy; the data can then be compressed better than + with the default empty dictionary. + + Depending on the size of the compression data structures selected by + deflateInit or deflateInit2, a part of the dictionary may in effect be + discarded, for example if the dictionary is larger than the window size + provided in deflateInit or deflateInit2. Thus the strings most likely to be + useful should be put at the end of the dictionary, not at the front. In + addition, the current implementation of deflate will use at most the window + size minus 262 bytes of the provided dictionary. + + Upon return of this function, strm->adler is set to the Adler-32 value + of the dictionary; the decompressor may later use this value to determine + which dictionary has been used by the compressor. (The Adler-32 value + applies to the whole dictionary even if only a subset of the dictionary is + actually used by the compressor.) If a raw deflate was requested, then the + Adler-32 value is not computed and strm->adler is not set. + + deflateSetDictionary returns Z_OK if success, or Z_STREAM_ERROR if a + parameter is invalid (e.g. dictionary being Z_NULL) or the stream state is + inconsistent (for example if deflate has already been called for this stream + or if not at a block boundary for raw deflate). deflateSetDictionary does + not perform any compression: this will be done by deflate(). +*/ + +ZEXTERN int ZEXPORT deflateGetDictionary(z_streamp strm, + Bytef *dictionary, + uInt *dictLength); +/* + Returns the sliding dictionary being maintained by deflate. dictLength is + set to the number of bytes in the dictionary, and that many bytes are copied + to dictionary. dictionary must have enough space, where 32768 bytes is + always enough. If deflateGetDictionary() is called with dictionary equal to + Z_NULL, then only the dictionary length is returned, and nothing is copied. + Similarly, if dictLength is Z_NULL, then it is not set. + + deflateGetDictionary() may return a length less than the window size, even + when more than the window size in input has been provided. It may return up + to 258 bytes less in that case, due to how zlib's implementation of deflate + manages the sliding window and lookahead for matches, where matches can be + up to 258 bytes long. If the application needs the last window-size bytes of + input, then that would need to be saved by the application outside of zlib. + + deflateGetDictionary returns Z_OK on success, or Z_STREAM_ERROR if the + stream state is inconsistent. +*/ + +ZEXTERN int ZEXPORT deflateCopy(z_streamp dest, + z_streamp source); +/* + Sets the destination stream as a complete copy of the source stream. + + This function can be useful when several compression strategies will be + tried, for example when there are several ways of pre-processing the input + data with a filter. The streams that will be discarded should then be freed + by calling deflateEnd. Note that deflateCopy duplicates the internal + compression state which can be quite large, so this strategy is slow and can + consume lots of memory. + + deflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not + enough memory, Z_STREAM_ERROR if the source stream state was inconsistent + (such as zalloc being Z_NULL). msg is left unchanged in both source and + destination. +*/ + +ZEXTERN int ZEXPORT deflateReset(z_streamp strm); +/* + This function is equivalent to deflateEnd followed by deflateInit, but + does not free and reallocate the internal compression state. The stream + will leave the compression level and any other attributes that may have been + set unchanged. total_in, total_out, adler, and msg are initialized. + + deflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source + stream state was inconsistent (such as zalloc or state being Z_NULL). +*/ + +ZEXTERN int ZEXPORT deflateParams(z_streamp strm, + int level, + int strategy); +/* + Dynamically update the compression level and compression strategy. The + interpretation of level and strategy is as in deflateInit2(). This can be + used to switch between compression and straight copy of the input data, or + to switch to a different kind of input data requiring a different strategy. + If the compression approach (which is a function of the level) or the + strategy is changed, and if there have been any deflate() calls since the + state was initialized or reset, then the input available so far is + compressed with the old level and strategy using deflate(strm, Z_BLOCK). + There are three approaches for the compression levels 0, 1..3, and 4..9 + respectively. The new level and strategy will take effect at the next call + of deflate(). + + If a deflate(strm, Z_BLOCK) is performed by deflateParams(), and it does + not have enough output space to complete, then the parameter change will not + take effect. In this case, deflateParams() can be called again with the + same parameters and more output space to try again. + + In order to assure a change in the parameters on the first try, the + deflate stream should be flushed using deflate() with Z_BLOCK or other flush + request until strm.avail_out is not zero, before calling deflateParams(). + Then no more input data should be provided before the deflateParams() call. + If this is done, the old level and strategy will be applied to the data + compressed before deflateParams(), and the new level and strategy will be + applied to the data compressed after deflateParams(). + + deflateParams returns Z_OK on success, Z_STREAM_ERROR if the source stream + state was inconsistent or if a parameter was invalid, or Z_BUF_ERROR if + there was not enough output space to complete the compression of the + available input data before a change in the strategy or approach. Note that + in the case of a Z_BUF_ERROR, the parameters are not changed. A return + value of Z_BUF_ERROR is not fatal, in which case deflateParams() can be + retried with more output space. +*/ + +ZEXTERN int ZEXPORT deflateTune(z_streamp strm, + int good_length, + int max_lazy, + int nice_length, + int max_chain); +/* + Fine tune deflate's internal compression parameters. This should only be + used by someone who understands the algorithm used by zlib's deflate for + searching for the best matching string, and even then only by the most + fanatic optimizer trying to squeeze out the last compressed bit for their + specific input data. Read the deflate.c source code for the meaning of the + max_lazy, good_length, nice_length, and max_chain parameters. + + deflateTune() can be called after deflateInit() or deflateInit2(), and + returns Z_OK on success, or Z_STREAM_ERROR for an invalid deflate stream. + */ + +ZEXTERN uLong ZEXPORT deflateBound(z_streamp strm, + uLong sourceLen); +/* + deflateBound() returns an upper bound on the compressed size after + deflation of sourceLen bytes. It must be called after deflateInit() or + deflateInit2(), and after deflateSetHeader(), if used. This would be used + to allocate an output buffer for deflation in a single pass, and so would be + called before deflate(). If that first deflate() call is provided the + sourceLen input bytes, an output buffer allocated to the size returned by + deflateBound(), and the flush value Z_FINISH, then deflate() is guaranteed + to return Z_STREAM_END. Note that it is possible for the compressed size to + be larger than the value returned by deflateBound() if flush options other + than Z_FINISH or Z_NO_FLUSH are used. +*/ + +ZEXTERN int ZEXPORT deflatePending(z_streamp strm, + unsigned *pending, + int *bits); +/* + deflatePending() returns the number of bytes and bits of output that have + been generated, but not yet provided in the available output. The bytes not + provided would be due to the available output space having being consumed. + The number of bits of output not provided are between 0 and 7, where they + await more bits to join them in order to fill out a full byte. If pending + or bits are Z_NULL, then those values are not set. + + deflatePending returns Z_OK if success, or Z_STREAM_ERROR if the source + stream state was inconsistent. + */ + +ZEXTERN int ZEXPORT deflatePrime(z_streamp strm, + int bits, + int value); +/* + deflatePrime() inserts bits in the deflate output stream. The intent + is that this function is used to start off the deflate output with the bits + leftover from a previous deflate stream when appending to it. As such, this + function can only be used for raw deflate, and must be used before the first + deflate() call after a deflateInit2() or deflateReset(). bits must be less + than or equal to 16, and that many of the least significant bits of value + will be inserted in the output. + + deflatePrime returns Z_OK if success, Z_BUF_ERROR if there was not enough + room in the internal buffer to insert the bits, or Z_STREAM_ERROR if the + source stream state was inconsistent. +*/ + +ZEXTERN int ZEXPORT deflateSetHeader(z_streamp strm, + gz_headerp head); +/* + deflateSetHeader() provides gzip header information for when a gzip + stream is requested by deflateInit2(). deflateSetHeader() may be called + after deflateInit2() or deflateReset() and before the first call of + deflate(). The text, time, os, extra field, name, and comment information + in the provided gz_header structure are written to the gzip header (xflag is + ignored -- the extra flags are set according to the compression level). The + caller must assure that, if not Z_NULL, name and comment are terminated with + a zero byte, and that if extra is not Z_NULL, that extra_len bytes are + available there. If hcrc is true, a gzip header crc is included. Note that + the current versions of the command-line version of gzip (up through version + 1.3.x) do not support header crc's, and will report that it is a "multi-part + gzip file" and give up. + + If deflateSetHeader is not used, the default gzip header has text false, + the time set to zero, and os set to the current operating system, with no + extra, name, or comment fields. The gzip header is returned to the default + state by deflateReset(). + + deflateSetHeader returns Z_OK if success, or Z_STREAM_ERROR if the source + stream state was inconsistent. +*/ + +/* +ZEXTERN int ZEXPORT inflateInit2(z_streamp strm, + int windowBits); + + This is another version of inflateInit with an extra parameter. The + fields next_in, avail_in, zalloc, zfree and opaque must be initialized + before by the caller. + + The windowBits parameter is the base two logarithm of the maximum window + size (the size of the history buffer). It should be in the range 8..15 for + this version of the library. The default value is 15 if inflateInit is used + instead. windowBits must be greater than or equal to the windowBits value + provided to deflateInit2() while compressing, or it must be equal to 15 if + deflateInit2() was not used. If a compressed stream with a larger window + size is given as input, inflate() will return with the error code + Z_DATA_ERROR instead of trying to allocate a larger window. + + windowBits can also be zero to request that inflate use the window size in + the zlib header of the compressed stream. + + windowBits can also be -8..-15 for raw inflate. In this case, -windowBits + determines the window size. inflate() will then process raw deflate data, + not looking for a zlib or gzip header, not generating a check value, and not + looking for any check values for comparison at the end of the stream. This + is for use with other formats that use the deflate compressed data format + such as zip. Those formats provide their own check values. If a custom + format is developed using the raw deflate format for compressed data, it is + recommended that a check value such as an Adler-32 or a CRC-32 be applied to + the uncompressed data as is done in the zlib, gzip, and zip formats. For + most applications, the zlib format should be used as is. Note that comments + above on the use in deflateInit2() applies to the magnitude of windowBits. + + windowBits can also be greater than 15 for optional gzip decoding. Add + 32 to windowBits to enable zlib and gzip decoding with automatic header + detection, or add 16 to decode only the gzip format (the zlib format will + return a Z_DATA_ERROR). If a gzip stream is being decoded, strm->adler is a + CRC-32 instead of an Adler-32. Unlike the gunzip utility and gzread() (see + below), inflate() will *not* automatically decode concatenated gzip members. + inflate() will return Z_STREAM_END at the end of the gzip member. The state + would need to be reset to continue decoding a subsequent gzip member. This + *must* be done if there is more data after a gzip member, in order for the + decompression to be compliant with the gzip standard (RFC 1952). + + inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough + memory, Z_VERSION_ERROR if the zlib library version is incompatible with the + version assumed by the caller, or Z_STREAM_ERROR if the parameters are + invalid, such as a null pointer to the structure. msg is set to null if + there is no error message. inflateInit2 does not perform any decompression + apart from possibly reading the zlib header if present: actual decompression + will be done by inflate(). (So next_in and avail_in may be modified, but + next_out and avail_out are unused and unchanged.) The current implementation + of inflateInit2() does not process any header information -- that is + deferred until inflate() is called. +*/ + +ZEXTERN int ZEXPORT inflateSetDictionary(z_streamp strm, + const Bytef *dictionary, + uInt dictLength); +/* + Initializes the decompression dictionary from the given uncompressed byte + sequence. This function must be called immediately after a call of inflate, + if that call returned Z_NEED_DICT. The dictionary chosen by the compressor + can be determined from the Adler-32 value returned by that call of inflate. + The compressor and decompressor must use exactly the same dictionary (see + deflateSetDictionary). For raw inflate, this function can be called at any + time to set the dictionary. If the provided dictionary is smaller than the + window and there is already data in the window, then the provided dictionary + will amend what's there. The application must insure that the dictionary + that was used for compression is provided. + + inflateSetDictionary returns Z_OK if success, Z_STREAM_ERROR if a + parameter is invalid (e.g. dictionary being Z_NULL) or the stream state is + inconsistent, Z_DATA_ERROR if the given dictionary doesn't match the + expected one (incorrect Adler-32 value). inflateSetDictionary does not + perform any decompression: this will be done by subsequent calls of + inflate(). +*/ + +ZEXTERN int ZEXPORT inflateGetDictionary(z_streamp strm, + Bytef *dictionary, + uInt *dictLength); +/* + Returns the sliding dictionary being maintained by inflate. dictLength is + set to the number of bytes in the dictionary, and that many bytes are copied + to dictionary. dictionary must have enough space, where 32768 bytes is + always enough. If inflateGetDictionary() is called with dictionary equal to + Z_NULL, then only the dictionary length is returned, and nothing is copied. + Similarly, if dictLength is Z_NULL, then it is not set. + + inflateGetDictionary returns Z_OK on success, or Z_STREAM_ERROR if the + stream state is inconsistent. +*/ + +ZEXTERN int ZEXPORT inflateSync(z_streamp strm); +/* + Skips invalid compressed data until a possible full flush point (see above + for the description of deflate with Z_FULL_FLUSH) can be found, or until all + available input is skipped. No output is provided. + + inflateSync searches for a 00 00 FF FF pattern in the compressed data. + All full flush points have this pattern, but not all occurrences of this + pattern are full flush points. + + inflateSync returns Z_OK if a possible full flush point has been found, + Z_BUF_ERROR if no more input was provided, Z_DATA_ERROR if no flush point + has been found, or Z_STREAM_ERROR if the stream structure was inconsistent. + In the success case, the application may save the current value of total_in + which indicates where valid compressed data was found. In the error case, + the application may repeatedly call inflateSync, providing more input each + time, until success or end of the input data. +*/ + +ZEXTERN int ZEXPORT inflateCopy(z_streamp dest, + z_streamp source); +/* + Sets the destination stream as a complete copy of the source stream. + + This function can be useful when randomly accessing a large stream. The + first pass through the stream can periodically record the inflate state, + allowing restarting inflate at those points when randomly accessing the + stream. + + inflateCopy returns Z_OK if success, Z_MEM_ERROR if there was not + enough memory, Z_STREAM_ERROR if the source stream state was inconsistent + (such as zalloc being Z_NULL). msg is left unchanged in both source and + destination. +*/ + +ZEXTERN int ZEXPORT inflateReset(z_streamp strm); +/* + This function is equivalent to inflateEnd followed by inflateInit, + but does not free and reallocate the internal decompression state. The + stream will keep attributes that may have been set by inflateInit2. + total_in, total_out, adler, and msg are initialized. + + inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source + stream state was inconsistent (such as zalloc or state being Z_NULL). +*/ + +ZEXTERN int ZEXPORT inflateReset2(z_streamp strm, + int windowBits); +/* + This function is the same as inflateReset, but it also permits changing + the wrap and window size requests. The windowBits parameter is interpreted + the same as it is for inflateInit2. If the window size is changed, then the + memory allocated for the window is freed, and the window will be reallocated + by inflate() if needed. + + inflateReset2 returns Z_OK if success, or Z_STREAM_ERROR if the source + stream state was inconsistent (such as zalloc or state being Z_NULL), or if + the windowBits parameter is invalid. +*/ + +ZEXTERN int ZEXPORT inflatePrime(z_streamp strm, + int bits, + int value); +/* + This function inserts bits in the inflate input stream. The intent is + that this function is used to start inflating at a bit position in the + middle of a byte. The provided bits will be used before any bytes are used + from next_in. This function should only be used with raw inflate, and + should be used before the first inflate() call after inflateInit2() or + inflateReset(). bits must be less than or equal to 16, and that many of the + least significant bits of value will be inserted in the input. + + If bits is negative, then the input stream bit buffer is emptied. Then + inflatePrime() can be called again to put bits in the buffer. This is used + to clear out bits leftover after feeding inflate a block description prior + to feeding inflate codes. + + inflatePrime returns Z_OK if success, or Z_STREAM_ERROR if the source + stream state was inconsistent. +*/ + +ZEXTERN long ZEXPORT inflateMark(z_streamp strm); +/* + This function returns two values, one in the lower 16 bits of the return + value, and the other in the remaining upper bits, obtained by shifting the + return value down 16 bits. If the upper value is -1 and the lower value is + zero, then inflate() is currently decoding information outside of a block. + If the upper value is -1 and the lower value is non-zero, then inflate is in + the middle of a stored block, with the lower value equaling the number of + bytes from the input remaining to copy. If the upper value is not -1, then + it is the number of bits back from the current bit position in the input of + the code (literal or length/distance pair) currently being processed. In + that case the lower value is the number of bytes already emitted for that + code. + + A code is being processed if inflate is waiting for more input to complete + decoding of the code, or if it has completed decoding but is waiting for + more output space to write the literal or match data. + + inflateMark() is used to mark locations in the input data for random + access, which may be at bit positions, and to note those cases where the + output of a code may span boundaries of random access blocks. The current + location in the input stream can be determined from avail_in and data_type + as noted in the description for the Z_BLOCK flush parameter for inflate. + + inflateMark returns the value noted above, or -65536 if the provided + source stream state was inconsistent. +*/ + +ZEXTERN int ZEXPORT inflateGetHeader(z_streamp strm, + gz_headerp head); +/* + inflateGetHeader() requests that gzip header information be stored in the + provided gz_header structure. inflateGetHeader() may be called after + inflateInit2() or inflateReset(), and before the first call of inflate(). + As inflate() processes the gzip stream, head->done is zero until the header + is completed, at which time head->done is set to one. If a zlib stream is + being decoded, then head->done is set to -1 to indicate that there will be + no gzip header information forthcoming. Note that Z_BLOCK or Z_TREES can be + used to force inflate() to return immediately after header processing is + complete and before any actual data is decompressed. + + The text, time, xflags, and os fields are filled in with the gzip header + contents. hcrc is set to true if there is a header CRC. (The header CRC + was valid if done is set to one.) If extra is not Z_NULL, then extra_max + contains the maximum number of bytes to write to extra. Once done is true, + extra_len contains the actual extra field length, and extra contains the + extra field, or that field truncated if extra_max is less than extra_len. + If name is not Z_NULL, then up to name_max characters are written there, + terminated with a zero unless the length is greater than name_max. If + comment is not Z_NULL, then up to comm_max characters are written there, + terminated with a zero unless the length is greater than comm_max. When any + of extra, name, or comment are not Z_NULL and the respective field is not + present in the header, then that field is set to Z_NULL to signal its + absence. This allows the use of deflateSetHeader() with the returned + structure to duplicate the header. However if those fields are set to + allocated memory, then the application will need to save those pointers + elsewhere so that they can be eventually freed. + + If inflateGetHeader is not used, then the header information is simply + discarded. The header is always checked for validity, including the header + CRC if present. inflateReset() will reset the process to discard the header + information. The application would need to call inflateGetHeader() again to + retrieve the header from the next gzip stream. + + inflateGetHeader returns Z_OK if success, or Z_STREAM_ERROR if the source + stream state was inconsistent. +*/ + +/* +ZEXTERN int ZEXPORT inflateBackInit(z_streamp strm, int windowBits, + unsigned char FAR *window); + + Initialize the internal stream state for decompression using inflateBack() + calls. The fields zalloc, zfree and opaque in strm must be initialized + before the call. If zalloc and zfree are Z_NULL, then the default library- + derived memory allocation routines are used. windowBits is the base two + logarithm of the window size, in the range 8..15. window is a caller + supplied buffer of that size. Except for special applications where it is + assured that deflate was used with small window sizes, windowBits must be 15 + and a 32K byte window must be supplied to be able to decompress general + deflate streams. + + See inflateBack() for the usage of these routines. + + inflateBackInit will return Z_OK on success, Z_STREAM_ERROR if any of + the parameters are invalid, Z_MEM_ERROR if the internal state could not be + allocated, or Z_VERSION_ERROR if the version of the library does not match + the version of the header file. +*/ + +typedef unsigned (*in_func)(void FAR *, + z_const unsigned char FAR * FAR *); +typedef int (*out_func)(void FAR *, unsigned char FAR *, unsigned); + +ZEXTERN int ZEXPORT inflateBack(z_streamp strm, + in_func in, void FAR *in_desc, + out_func out, void FAR *out_desc); +/* + inflateBack() does a raw inflate with a single call using a call-back + interface for input and output. This is potentially more efficient than + inflate() for file i/o applications, in that it avoids copying between the + output and the sliding window by simply making the window itself the output + buffer. inflate() can be faster on modern CPUs when used with large + buffers. inflateBack() trusts the application to not change the output + buffer passed by the output function, at least until inflateBack() returns. + + inflateBackInit() must be called first to allocate the internal state + and to initialize the state with the user-provided window buffer. + inflateBack() may then be used multiple times to inflate a complete, raw + deflate stream with each call. inflateBackEnd() is then called to free the + allocated state. + + A raw deflate stream is one with no zlib or gzip header or trailer. + This routine would normally be used in a utility that reads zip or gzip + files and writes out uncompressed files. The utility would decode the + header and process the trailer on its own, hence this routine expects only + the raw deflate stream to decompress. This is different from the default + behavior of inflate(), which expects a zlib header and trailer around the + deflate stream. + + inflateBack() uses two subroutines supplied by the caller that are then + called by inflateBack() for input and output. inflateBack() calls those + routines until it reads a complete deflate stream and writes out all of the + uncompressed data, or until it encounters an error. The function's + parameters and return types are defined above in the in_func and out_func + typedefs. inflateBack() will call in(in_desc, &buf) which should return the + number of bytes of provided input, and a pointer to that input in buf. If + there is no input available, in() must return zero -- buf is ignored in that + case -- and inflateBack() will return a buffer error. inflateBack() will + call out(out_desc, buf, len) to write the uncompressed data buf[0..len-1]. + out() should return zero on success, or non-zero on failure. If out() + returns non-zero, inflateBack() will return with an error. Neither in() nor + out() are permitted to change the contents of the window provided to + inflateBackInit(), which is also the buffer that out() uses to write from. + The length written by out() will be at most the window size. Any non-zero + amount of input may be provided by in(). + + For convenience, inflateBack() can be provided input on the first call by + setting strm->next_in and strm->avail_in. If that input is exhausted, then + in() will be called. Therefore strm->next_in must be initialized before + calling inflateBack(). If strm->next_in is Z_NULL, then in() will be called + immediately for input. If strm->next_in is not Z_NULL, then strm->avail_in + must also be initialized, and then if strm->avail_in is not zero, input will + initially be taken from strm->next_in[0 .. strm->avail_in - 1]. + + The in_desc and out_desc parameters of inflateBack() is passed as the + first parameter of in() and out() respectively when they are called. These + descriptors can be optionally used to pass any information that the caller- + supplied in() and out() functions need to do their job. + + On return, inflateBack() will set strm->next_in and strm->avail_in to + pass back any unused input that was provided by the last in() call. The + return values of inflateBack() can be Z_STREAM_END on success, Z_BUF_ERROR + if in() or out() returned an error, Z_DATA_ERROR if there was a format error + in the deflate stream (in which case strm->msg is set to indicate the nature + of the error), or Z_STREAM_ERROR if the stream was not properly initialized. + In the case of Z_BUF_ERROR, an input or output error can be distinguished + using strm->next_in which will be Z_NULL only if in() returned an error. If + strm->next_in is not Z_NULL, then the Z_BUF_ERROR was due to out() returning + non-zero. (in() will always be called before out(), so strm->next_in is + assured to be defined if out() returns non-zero.) Note that inflateBack() + cannot return Z_OK. +*/ + +ZEXTERN int ZEXPORT inflateBackEnd(z_streamp strm); +/* + All memory allocated by inflateBackInit() is freed. + + inflateBackEnd() returns Z_OK on success, or Z_STREAM_ERROR if the stream + state was inconsistent. +*/ + +ZEXTERN uLong ZEXPORT zlibCompileFlags(void); +/* Return flags indicating compile-time options. + + Type sizes, two bits each, 00 = 16 bits, 01 = 32, 10 = 64, 11 = other: + 1.0: size of uInt + 3.2: size of uLong + 5.4: size of voidpf (pointer) + 7.6: size of z_off_t + + Compiler, assembler, and debug options: + 8: ZLIB_DEBUG + 9: ASMV or ASMINF -- use ASM code + 10: ZLIB_WINAPI -- exported functions use the WINAPI calling convention + 11: 0 (reserved) + + One-time table building (smaller code, but not thread-safe if true): + 12: BUILDFIXED -- build static block decoding tables when needed + 13: DYNAMIC_CRC_TABLE -- build CRC calculation tables when needed + 14,15: 0 (reserved) + + Library content (indicates missing functionality): + 16: NO_GZCOMPRESS -- gz* functions cannot compress (to avoid linking + deflate code when not needed) + 17: NO_GZIP -- deflate can't write gzip streams, and inflate can't detect + and decode gzip streams (to avoid linking crc code) + 18-19: 0 (reserved) + + Operation variations (changes in library functionality): + 20: PKZIP_BUG_WORKAROUND -- slightly more permissive inflate + 21: FASTEST -- deflate algorithm with only one, lowest compression level + 22,23: 0 (reserved) + + The sprintf variant used by gzprintf (zero is best): + 24: 0 = vs*, 1 = s* -- 1 means limited to 20 arguments after the format + 25: 0 = *nprintf, 1 = *printf -- 1 means gzprintf() not secure! + 26: 0 = returns value, 1 = void -- 1 means inferred string length returned + + Remainder: + 27-31: 0 (reserved) + */ + +#ifndef Z_SOLO + + /* utility functions */ + +/* + The following utility functions are implemented on top of the basic + stream-oriented functions. To simplify the interface, some default options + are assumed (compression level and memory usage, standard memory allocation + functions). The source code of these utility functions can be modified if + you need special options. +*/ + +ZEXTERN int ZEXPORT compress(Bytef *dest, uLongf *destLen, + const Bytef *source, uLong sourceLen); +/* + Compresses the source buffer into the destination buffer. sourceLen is + the byte length of the source buffer. Upon entry, destLen is the total size + of the destination buffer, which must be at least the value returned by + compressBound(sourceLen). Upon exit, destLen is the actual size of the + compressed data. compress() is equivalent to compress2() with a level + parameter of Z_DEFAULT_COMPRESSION. + + compress returns Z_OK if success, Z_MEM_ERROR if there was not + enough memory, Z_BUF_ERROR if there was not enough room in the output + buffer. +*/ + +ZEXTERN int ZEXPORT compress2(Bytef *dest, uLongf *destLen, + const Bytef *source, uLong sourceLen, + int level); +/* + Compresses the source buffer into the destination buffer. The level + parameter has the same meaning as in deflateInit. sourceLen is the byte + length of the source buffer. Upon entry, destLen is the total size of the + destination buffer, which must be at least the value returned by + compressBound(sourceLen). Upon exit, destLen is the actual size of the + compressed data. + + compress2 returns Z_OK if success, Z_MEM_ERROR if there was not enough + memory, Z_BUF_ERROR if there was not enough room in the output buffer, + Z_STREAM_ERROR if the level parameter is invalid. +*/ + +ZEXTERN uLong ZEXPORT compressBound(uLong sourceLen); +/* + compressBound() returns an upper bound on the compressed size after + compress() or compress2() on sourceLen bytes. It would be used before a + compress() or compress2() call to allocate the destination buffer. +*/ + +ZEXTERN int ZEXPORT uncompress(Bytef *dest, uLongf *destLen, + const Bytef *source, uLong sourceLen); +/* + Decompresses the source buffer into the destination buffer. sourceLen is + the byte length of the source buffer. Upon entry, destLen is the total size + of the destination buffer, which must be large enough to hold the entire + uncompressed data. (The size of the uncompressed data must have been saved + previously by the compressor and transmitted to the decompressor by some + mechanism outside the scope of this compression library.) Upon exit, destLen + is the actual size of the uncompressed data. + + uncompress returns Z_OK if success, Z_MEM_ERROR if there was not + enough memory, Z_BUF_ERROR if there was not enough room in the output + buffer, or Z_DATA_ERROR if the input data was corrupted or incomplete. In + the case where there is not enough room, uncompress() will fill the output + buffer with the uncompressed data up to that point. +*/ + +ZEXTERN int ZEXPORT uncompress2(Bytef *dest, uLongf *destLen, + const Bytef *source, uLong *sourceLen); +/* + Same as uncompress, except that sourceLen is a pointer, where the + length of the source is *sourceLen. On return, *sourceLen is the number of + source bytes consumed. +*/ + + /* gzip file access functions */ + +/* + This library supports reading and writing files in gzip (.gz) format with + an interface similar to that of stdio, using the functions that start with + "gz". The gzip format is different from the zlib format. gzip is a gzip + wrapper, documented in RFC 1952, wrapped around a deflate stream. +*/ + +typedef struct gzFile_s *gzFile; /* semi-opaque gzip file descriptor */ + +/* +ZEXTERN gzFile ZEXPORT gzopen(const char *path, const char *mode); + + Open the gzip (.gz) file at path for reading and decompressing, or + compressing and writing. The mode parameter is as in fopen ("rb" or "wb") + but can also include a compression level ("wb9") or a strategy: 'f' for + filtered data as in "wb6f", 'h' for Huffman-only compression as in "wb1h", + 'R' for run-length encoding as in "wb1R", or 'F' for fixed code compression + as in "wb9F". (See the description of deflateInit2 for more information + about the strategy parameter.) 'T' will request transparent writing or + appending with no compression and not using the gzip format. + + "a" can be used instead of "w" to request that the gzip stream that will + be written be appended to the file. "+" will result in an error, since + reading and writing to the same gzip file is not supported. The addition of + "x" when writing will create the file exclusively, which fails if the file + already exists. On systems that support it, the addition of "e" when + reading or writing will set the flag to close the file on an execve() call. + + These functions, as well as gzip, will read and decode a sequence of gzip + streams in a file. The append function of gzopen() can be used to create + such a file. (Also see gzflush() for another way to do this.) When + appending, gzopen does not test whether the file begins with a gzip stream, + nor does it look for the end of the gzip streams to begin appending. gzopen + will simply append a gzip stream to the existing file. + + gzopen can be used to read a file which is not in gzip format; in this + case gzread will directly read from the file without decompression. When + reading, this will be detected automatically by looking for the magic two- + byte gzip header. + + gzopen returns NULL if the file could not be opened, if there was + insufficient memory to allocate the gzFile state, or if an invalid mode was + specified (an 'r', 'w', or 'a' was not provided, or '+' was provided). + errno can be checked to determine if the reason gzopen failed was that the + file could not be opened. +*/ + +ZEXTERN gzFile ZEXPORT gzdopen(int fd, const char *mode); +/* + Associate a gzFile with the file descriptor fd. File descriptors are + obtained from calls like open, dup, creat, pipe or fileno (if the file has + been previously opened with fopen). The mode parameter is as in gzopen. + + The next call of gzclose on the returned gzFile will also close the file + descriptor fd, just like fclose(fdopen(fd, mode)) closes the file descriptor + fd. If you want to keep fd open, use fd = dup(fd_keep); gz = gzdopen(fd, + mode);. The duplicated descriptor should be saved to avoid a leak, since + gzdopen does not close fd if it fails. If you are using fileno() to get the + file descriptor from a FILE *, then you will have to use dup() to avoid + double-close()ing the file descriptor. Both gzclose() and fclose() will + close the associated file descriptor, so they need to have different file + descriptors. + + gzdopen returns NULL if there was insufficient memory to allocate the + gzFile state, if an invalid mode was specified (an 'r', 'w', or 'a' was not + provided, or '+' was provided), or if fd is -1. The file descriptor is not + used until the next gz* read, write, seek, or close operation, so gzdopen + will not detect if fd is invalid (unless fd is -1). +*/ + +ZEXTERN int ZEXPORT gzbuffer(gzFile file, unsigned size); +/* + Set the internal buffer size used by this library's functions for file to + size. The default buffer size is 8192 bytes. This function must be called + after gzopen() or gzdopen(), and before any other calls that read or write + the file. The buffer memory allocation is always deferred to the first read + or write. Three times that size in buffer space is allocated. A larger + buffer size of, for example, 64K or 128K bytes will noticeably increase the + speed of decompression (reading). + + The new buffer size also affects the maximum length for gzprintf(). + + gzbuffer() returns 0 on success, or -1 on failure, such as being called + too late. +*/ + +ZEXTERN int ZEXPORT gzsetparams(gzFile file, int level, int strategy); +/* + Dynamically update the compression level and strategy for file. See the + description of deflateInit2 for the meaning of these parameters. Previously + provided data is flushed before applying the parameter changes. + + gzsetparams returns Z_OK if success, Z_STREAM_ERROR if the file was not + opened for writing, Z_ERRNO if there is an error writing the flushed data, + or Z_MEM_ERROR if there is a memory allocation error. +*/ + +ZEXTERN int ZEXPORT gzread(gzFile file, voidp buf, unsigned len); +/* + Read and decompress up to len uncompressed bytes from file into buf. If + the input file is not in gzip format, gzread copies the given number of + bytes into the buffer directly from the file. + + After reaching the end of a gzip stream in the input, gzread will continue + to read, looking for another gzip stream. Any number of gzip streams may be + concatenated in the input file, and will all be decompressed by gzread(). + If something other than a gzip stream is encountered after a gzip stream, + that remaining trailing garbage is ignored (and no error is returned). + + gzread can be used to read a gzip file that is being concurrently written. + Upon reaching the end of the input, gzread will return with the available + data. If the error code returned by gzerror is Z_OK or Z_BUF_ERROR, then + gzclearerr can be used to clear the end of file indicator in order to permit + gzread to be tried again. Z_OK indicates that a gzip stream was completed + on the last gzread. Z_BUF_ERROR indicates that the input file ended in the + middle of a gzip stream. Note that gzread does not return -1 in the event + of an incomplete gzip stream. This error is deferred until gzclose(), which + will return Z_BUF_ERROR if the last gzread ended in the middle of a gzip + stream. Alternatively, gzerror can be used before gzclose to detect this + case. + + gzread returns the number of uncompressed bytes actually read, less than + len for end of file, or -1 for error. If len is too large to fit in an int, + then nothing is read, -1 is returned, and the error state is set to + Z_STREAM_ERROR. +*/ + +ZEXTERN z_size_t ZEXPORT gzfread(voidp buf, z_size_t size, z_size_t nitems, + gzFile file); +/* + Read and decompress up to nitems items of size size from file into buf, + otherwise operating as gzread() does. This duplicates the interface of + stdio's fread(), with size_t request and return types. If the library + defines size_t, then z_size_t is identical to size_t. If not, then z_size_t + is an unsigned integer type that can contain a pointer. + + gzfread() returns the number of full items read of size size, or zero if + the end of the file was reached and a full item could not be read, or if + there was an error. gzerror() must be consulted if zero is returned in + order to determine if there was an error. If the multiplication of size and + nitems overflows, i.e. the product does not fit in a z_size_t, then nothing + is read, zero is returned, and the error state is set to Z_STREAM_ERROR. + + In the event that the end of file is reached and only a partial item is + available at the end, i.e. the remaining uncompressed data length is not a + multiple of size, then the final partial item is nevertheless read into buf + and the end-of-file flag is set. The length of the partial item read is not + provided, but could be inferred from the result of gztell(). This behavior + is the same as the behavior of fread() implementations in common libraries, + but it prevents the direct use of gzfread() to read a concurrently written + file, resetting and retrying on end-of-file, when size is not 1. +*/ + +ZEXTERN int ZEXPORT gzwrite(gzFile file, voidpc buf, unsigned len); +/* + Compress and write the len uncompressed bytes at buf to file. gzwrite + returns the number of uncompressed bytes written or 0 in case of error. +*/ + +ZEXTERN z_size_t ZEXPORT gzfwrite(voidpc buf, z_size_t size, + z_size_t nitems, gzFile file); +/* + Compress and write nitems items of size size from buf to file, duplicating + the interface of stdio's fwrite(), with size_t request and return types. If + the library defines size_t, then z_size_t is identical to size_t. If not, + then z_size_t is an unsigned integer type that can contain a pointer. + + gzfwrite() returns the number of full items written of size size, or zero + if there was an error. If the multiplication of size and nitems overflows, + i.e. the product does not fit in a z_size_t, then nothing is written, zero + is returned, and the error state is set to Z_STREAM_ERROR. +*/ + +ZEXTERN int ZEXPORTVA gzprintf(gzFile file, const char *format, ...); +/* + Convert, format, compress, and write the arguments (...) to file under + control of the string format, as in fprintf. gzprintf returns the number of + uncompressed bytes actually written, or a negative zlib error code in case + of error. The number of uncompressed bytes written is limited to 8191, or + one less than the buffer size given to gzbuffer(). The caller should assure + that this limit is not exceeded. If it is exceeded, then gzprintf() will + return an error (0) with nothing written. In this case, there may also be a + buffer overflow with unpredictable consequences, which is possible only if + zlib was compiled with the insecure functions sprintf() or vsprintf(), + because the secure snprintf() or vsnprintf() functions were not available. + This can be determined using zlibCompileFlags(). +*/ + +ZEXTERN int ZEXPORT gzputs(gzFile file, const char *s); +/* + Compress and write the given null-terminated string s to file, excluding + the terminating null character. + + gzputs returns the number of characters written, or -1 in case of error. +*/ + +ZEXTERN char * ZEXPORT gzgets(gzFile file, char *buf, int len); +/* + Read and decompress bytes from file into buf, until len-1 characters are + read, or until a newline character is read and transferred to buf, or an + end-of-file condition is encountered. If any characters are read or if len + is one, the string is terminated with a null character. If no characters + are read due to an end-of-file or len is less than one, then the buffer is + left untouched. + + gzgets returns buf which is a null-terminated string, or it returns NULL + for end-of-file or in case of error. If there was an error, the contents at + buf are indeterminate. +*/ + +ZEXTERN int ZEXPORT gzputc(gzFile file, int c); +/* + Compress and write c, converted to an unsigned char, into file. gzputc + returns the value that was written, or -1 in case of error. +*/ + +ZEXTERN int ZEXPORT gzgetc(gzFile file); +/* + Read and decompress one byte from file. gzgetc returns this byte or -1 + in case of end of file or error. This is implemented as a macro for speed. + As such, it does not do all of the checking the other functions do. I.e. + it does not check to see if file is NULL, nor whether the structure file + points to has been clobbered or not. +*/ + +ZEXTERN int ZEXPORT gzungetc(int c, gzFile file); +/* + Push c back onto the stream for file to be read as the first character on + the next read. At least one character of push-back is always allowed. + gzungetc() returns the character pushed, or -1 on failure. gzungetc() will + fail if c is -1, and may fail if a character has been pushed but not read + yet. If gzungetc is used immediately after gzopen or gzdopen, at least the + output buffer size of pushed characters is allowed. (See gzbuffer above.) + The pushed character will be discarded if the stream is repositioned with + gzseek() or gzrewind(). +*/ + +ZEXTERN int ZEXPORT gzflush(gzFile file, int flush); +/* + Flush all pending output to file. The parameter flush is as in the + deflate() function. The return value is the zlib error number (see function + gzerror below). gzflush is only permitted when writing. + + If the flush parameter is Z_FINISH, the remaining data is written and the + gzip stream is completed in the output. If gzwrite() is called again, a new + gzip stream will be started in the output. gzread() is able to read such + concatenated gzip streams. + + gzflush should be called only when strictly necessary because it will + degrade compression if called too often. +*/ + +/* +ZEXTERN z_off_t ZEXPORT gzseek(gzFile file, + z_off_t offset, int whence); + + Set the starting position to offset relative to whence for the next gzread + or gzwrite on file. The offset represents a number of bytes in the + uncompressed data stream. The whence parameter is defined as in lseek(2); + the value SEEK_END is not supported. + + If the file is opened for reading, this function is emulated but can be + extremely slow. If the file is opened for writing, only forward seeks are + supported; gzseek then compresses a sequence of zeroes up to the new + starting position. + + gzseek returns the resulting offset location as measured in bytes from + the beginning of the uncompressed stream, or -1 in case of error, in + particular if the file is opened for writing and the new starting position + would be before the current position. +*/ + +ZEXTERN int ZEXPORT gzrewind(gzFile file); +/* + Rewind file. This function is supported only for reading. + + gzrewind(file) is equivalent to (int)gzseek(file, 0L, SEEK_SET). +*/ + +/* +ZEXTERN z_off_t ZEXPORT gztell(gzFile file); + + Return the starting position for the next gzread or gzwrite on file. + This position represents a number of bytes in the uncompressed data stream, + and is zero when starting, even if appending or reading a gzip stream from + the middle of a file using gzdopen(). + + gztell(file) is equivalent to gzseek(file, 0L, SEEK_CUR) +*/ + +/* +ZEXTERN z_off_t ZEXPORT gzoffset(gzFile file); + + Return the current compressed (actual) read or write offset of file. This + offset includes the count of bytes that precede the gzip stream, for example + when appending or when using gzdopen() for reading. When reading, the + offset does not include as yet unused buffered input. This information can + be used for a progress indicator. On error, gzoffset() returns -1. +*/ + +ZEXTERN int ZEXPORT gzeof(gzFile file); +/* + Return true (1) if the end-of-file indicator for file has been set while + reading, false (0) otherwise. Note that the end-of-file indicator is set + only if the read tried to go past the end of the input, but came up short. + Therefore, just like feof(), gzeof() may return false even if there is no + more data to read, in the event that the last read request was for the exact + number of bytes remaining in the input file. This will happen if the input + file size is an exact multiple of the buffer size. + + If gzeof() returns true, then the read functions will return no more data, + unless the end-of-file indicator is reset by gzclearerr() and the input file + has grown since the previous end of file was detected. +*/ + +ZEXTERN int ZEXPORT gzdirect(gzFile file); +/* + Return true (1) if file is being copied directly while reading, or false + (0) if file is a gzip stream being decompressed. + + If the input file is empty, gzdirect() will return true, since the input + does not contain a gzip stream. + + If gzdirect() is used immediately after gzopen() or gzdopen() it will + cause buffers to be allocated to allow reading the file to determine if it + is a gzip file. Therefore if gzbuffer() is used, it should be called before + gzdirect(). + + When writing, gzdirect() returns true (1) if transparent writing was + requested ("wT" for the gzopen() mode), or false (0) otherwise. (Note: + gzdirect() is not needed when writing. Transparent writing must be + explicitly requested, so the application already knows the answer. When + linking statically, using gzdirect() will include all of the zlib code for + gzip file reading and decompression, which may not be desired.) +*/ + +ZEXTERN int ZEXPORT gzclose(gzFile file); +/* + Flush all pending output for file, if necessary, close file and + deallocate the (de)compression state. Note that once file is closed, you + cannot call gzerror with file, since its structures have been deallocated. + gzclose must not be called more than once on the same file, just as free + must not be called more than once on the same allocation. + + gzclose will return Z_STREAM_ERROR if file is not valid, Z_ERRNO on a + file operation error, Z_MEM_ERROR if out of memory, Z_BUF_ERROR if the + last read ended in the middle of a gzip stream, or Z_OK on success. +*/ + +ZEXTERN int ZEXPORT gzclose_r(gzFile file); +ZEXTERN int ZEXPORT gzclose_w(gzFile file); +/* + Same as gzclose(), but gzclose_r() is only for use when reading, and + gzclose_w() is only for use when writing or appending. The advantage to + using these instead of gzclose() is that they avoid linking in zlib + compression or decompression code that is not used when only reading or only + writing respectively. If gzclose() is used, then both compression and + decompression code will be included the application when linking to a static + zlib library. +*/ + +ZEXTERN const char * ZEXPORT gzerror(gzFile file, int *errnum); +/* + Return the error message for the last error which occurred on file. + errnum is set to zlib error number. If an error occurred in the file system + and not in the compression library, errnum is set to Z_ERRNO and the + application may consult errno to get the exact error code. + + The application must not modify the returned string. Future calls to + this function may invalidate the previously returned string. If file is + closed, then the string previously returned by gzerror will no longer be + available. + + gzerror() should be used to distinguish errors from end-of-file for those + functions above that do not distinguish those cases in their return values. +*/ + +ZEXTERN void ZEXPORT gzclearerr(gzFile file); +/* + Clear the error and end-of-file flags for file. This is analogous to the + clearerr() function in stdio. This is useful for continuing to read a gzip + file that is being written concurrently. +*/ + +#endif /* !Z_SOLO */ + + /* checksum functions */ + +/* + These functions are not related to compression but are exported + anyway because they might be useful in applications using the compression + library. +*/ + +ZEXTERN uLong ZEXPORT adler32(uLong adler, const Bytef *buf, uInt len); +/* + Update a running Adler-32 checksum with the bytes buf[0..len-1] and + return the updated checksum. An Adler-32 value is in the range of a 32-bit + unsigned integer. If buf is Z_NULL, this function returns the required + initial value for the checksum. + + An Adler-32 checksum is almost as reliable as a CRC-32 but can be computed + much faster. + + Usage example: + + uLong adler = adler32(0L, Z_NULL, 0); + + while (read_buffer(buffer, length) != EOF) { + adler = adler32(adler, buffer, length); + } + if (adler != original_adler) error(); +*/ + +ZEXTERN uLong ZEXPORT adler32_z(uLong adler, const Bytef *buf, + z_size_t len); +/* + Same as adler32(), but with a size_t length. +*/ + +/* +ZEXTERN uLong ZEXPORT adler32_combine(uLong adler1, uLong adler2, + z_off_t len2); + + Combine two Adler-32 checksums into one. For two sequences of bytes, seq1 + and seq2 with lengths len1 and len2, Adler-32 checksums were calculated for + each, adler1 and adler2. adler32_combine() returns the Adler-32 checksum of + seq1 and seq2 concatenated, requiring only adler1, adler2, and len2. Note + that the z_off_t type (like off_t) is a signed integer. If len2 is + negative, the result has no meaning or utility. +*/ + +ZEXTERN uLong ZEXPORT crc32(uLong crc, const Bytef *buf, uInt len); +/* + Update a running CRC-32 with the bytes buf[0..len-1] and return the + updated CRC-32. A CRC-32 value is in the range of a 32-bit unsigned integer. + If buf is Z_NULL, this function returns the required initial value for the + crc. Pre- and post-conditioning (one's complement) is performed within this + function so it shouldn't be done by the application. + + Usage example: + + uLong crc = crc32(0L, Z_NULL, 0); + + while (read_buffer(buffer, length) != EOF) { + crc = crc32(crc, buffer, length); + } + if (crc != original_crc) error(); +*/ + +ZEXTERN uLong ZEXPORT crc32_z(uLong crc, const Bytef *buf, + z_size_t len); +/* + Same as crc32(), but with a size_t length. +*/ + +/* +ZEXTERN uLong ZEXPORT crc32_combine(uLong crc1, uLong crc2, z_off_t len2); + + Combine two CRC-32 check values into one. For two sequences of bytes, + seq1 and seq2 with lengths len1 and len2, CRC-32 check values were + calculated for each, crc1 and crc2. crc32_combine() returns the CRC-32 + check value of seq1 and seq2 concatenated, requiring only crc1, crc2, and + len2. len2 must be non-negative. +*/ + +/* +ZEXTERN uLong ZEXPORT crc32_combine_gen(z_off_t len2); + + Return the operator corresponding to length len2, to be used with + crc32_combine_op(). len2 must be non-negative. +*/ + +ZEXTERN uLong ZEXPORT crc32_combine_op(uLong crc1, uLong crc2, uLong op); +/* + Give the same result as crc32_combine(), using op in place of len2. op is + is generated from len2 by crc32_combine_gen(). This will be faster than + crc32_combine() if the generated op is used more than once. +*/ + + + /* various hacks, don't look :) */ + +/* deflateInit and inflateInit are macros to allow checking the zlib version + * and the compiler's view of z_stream: + */ +ZEXTERN int ZEXPORT deflateInit_(z_streamp strm, int level, + const char *version, int stream_size); +ZEXTERN int ZEXPORT inflateInit_(z_streamp strm, + const char *version, int stream_size); +ZEXTERN int ZEXPORT deflateInit2_(z_streamp strm, int level, int method, + int windowBits, int memLevel, + int strategy, const char *version, + int stream_size); +ZEXTERN int ZEXPORT inflateInit2_(z_streamp strm, int windowBits, + const char *version, int stream_size); +ZEXTERN int ZEXPORT inflateBackInit_(z_streamp strm, int windowBits, + unsigned char FAR *window, + const char *version, + int stream_size); +#ifdef Z_PREFIX_SET +# define z_deflateInit(strm, level) \ + deflateInit_((strm), (level), ZLIB_VERSION, (int)sizeof(z_stream)) +# define z_inflateInit(strm) \ + inflateInit_((strm), ZLIB_VERSION, (int)sizeof(z_stream)) +# define z_deflateInit2(strm, level, method, windowBits, memLevel, strategy) \ + deflateInit2_((strm),(level),(method),(windowBits),(memLevel),\ + (strategy), ZLIB_VERSION, (int)sizeof(z_stream)) +# define z_inflateInit2(strm, windowBits) \ + inflateInit2_((strm), (windowBits), ZLIB_VERSION, \ + (int)sizeof(z_stream)) +# define z_inflateBackInit(strm, windowBits, window) \ + inflateBackInit_((strm), (windowBits), (window), \ + ZLIB_VERSION, (int)sizeof(z_stream)) +#else +# define deflateInit(strm, level) \ + deflateInit_((strm), (level), ZLIB_VERSION, (int)sizeof(z_stream)) +# define inflateInit(strm) \ + inflateInit_((strm), ZLIB_VERSION, (int)sizeof(z_stream)) +# define deflateInit2(strm, level, method, windowBits, memLevel, strategy) \ + deflateInit2_((strm),(level),(method),(windowBits),(memLevel),\ + (strategy), ZLIB_VERSION, (int)sizeof(z_stream)) +# define inflateInit2(strm, windowBits) \ + inflateInit2_((strm), (windowBits), ZLIB_VERSION, \ + (int)sizeof(z_stream)) +# define inflateBackInit(strm, windowBits, window) \ + inflateBackInit_((strm), (windowBits), (window), \ + ZLIB_VERSION, (int)sizeof(z_stream)) +#endif + +#ifndef Z_SOLO + +/* gzgetc() macro and its supporting function and exposed data structure. Note + * that the real internal state is much larger than the exposed structure. + * This abbreviated structure exposes just enough for the gzgetc() macro. The + * user should not mess with these exposed elements, since their names or + * behavior could change in the future, perhaps even capriciously. They can + * only be used by the gzgetc() macro. You have been warned. + */ +struct gzFile_s { + unsigned have; + unsigned char *next; + z_off64_t pos; +}; +ZEXTERN int ZEXPORT gzgetc_(gzFile file); /* backward compatibility */ +#ifdef Z_PREFIX_SET +# undef z_gzgetc +# define z_gzgetc(g) \ + ((g)->have ? ((g)->have--, (g)->pos++, *((g)->next)++) : (gzgetc)(g)) +#else +# define gzgetc(g) \ + ((g)->have ? ((g)->have--, (g)->pos++, *((g)->next)++) : (gzgetc)(g)) +#endif + +/* provide 64-bit offset functions if _LARGEFILE64_SOURCE defined, and/or + * change the regular functions to 64 bits if _FILE_OFFSET_BITS is 64 (if + * both are true, the application gets the *64 functions, and the regular + * functions are changed to 64 bits) -- in case these are set on systems + * without large file support, _LFS64_LARGEFILE must also be true + */ +#ifdef Z_LARGE64 + ZEXTERN gzFile ZEXPORT gzopen64(const char *, const char *); + ZEXTERN z_off64_t ZEXPORT gzseek64(gzFile, z_off64_t, int); + ZEXTERN z_off64_t ZEXPORT gztell64(gzFile); + ZEXTERN z_off64_t ZEXPORT gzoffset64(gzFile); + ZEXTERN uLong ZEXPORT adler32_combine64(uLong, uLong, z_off64_t); + ZEXTERN uLong ZEXPORT crc32_combine64(uLong, uLong, z_off64_t); + ZEXTERN uLong ZEXPORT crc32_combine_gen64(z_off64_t); +#endif + +#if !defined(ZLIB_INTERNAL) && defined(Z_WANT64) +# ifdef Z_PREFIX_SET +# define z_gzopen z_gzopen64 +# define z_gzseek z_gzseek64 +# define z_gztell z_gztell64 +# define z_gzoffset z_gzoffset64 +# define z_adler32_combine z_adler32_combine64 +# define z_crc32_combine z_crc32_combine64 +# define z_crc32_combine_gen z_crc32_combine_gen64 +# else +# define gzopen gzopen64 +# define gzseek gzseek64 +# define gztell gztell64 +# define gzoffset gzoffset64 +# define adler32_combine adler32_combine64 +# define crc32_combine crc32_combine64 +# define crc32_combine_gen crc32_combine_gen64 +# endif +# ifndef Z_LARGE64 + ZEXTERN gzFile ZEXPORT gzopen64(const char *, const char *); + ZEXTERN z_off_t ZEXPORT gzseek64(gzFile, z_off_t, int); + ZEXTERN z_off_t ZEXPORT gztell64(gzFile); + ZEXTERN z_off_t ZEXPORT gzoffset64(gzFile); + ZEXTERN uLong ZEXPORT adler32_combine64(uLong, uLong, z_off_t); + ZEXTERN uLong ZEXPORT crc32_combine64(uLong, uLong, z_off_t); + ZEXTERN uLong ZEXPORT crc32_combine_gen64(z_off_t); +# endif +#else + ZEXTERN gzFile ZEXPORT gzopen(const char *, const char *); + ZEXTERN z_off_t ZEXPORT gzseek(gzFile, z_off_t, int); + ZEXTERN z_off_t ZEXPORT gztell(gzFile); + ZEXTERN z_off_t ZEXPORT gzoffset(gzFile); + ZEXTERN uLong ZEXPORT adler32_combine(uLong, uLong, z_off_t); + ZEXTERN uLong ZEXPORT crc32_combine(uLong, uLong, z_off_t); + ZEXTERN uLong ZEXPORT crc32_combine_gen(z_off_t); +#endif + +#else /* Z_SOLO */ + + ZEXTERN uLong ZEXPORT adler32_combine(uLong, uLong, z_off_t); + ZEXTERN uLong ZEXPORT crc32_combine(uLong, uLong, z_off_t); + ZEXTERN uLong ZEXPORT crc32_combine_gen(z_off_t); + +#endif /* !Z_SOLO */ + +/* undocumented functions */ +ZEXTERN const char * ZEXPORT zError(int); +ZEXTERN int ZEXPORT inflateSyncPoint(z_streamp); +ZEXTERN const z_crc_t FAR * ZEXPORT get_crc_table(void); +ZEXTERN int ZEXPORT inflateUndermine(z_streamp, int); +ZEXTERN int ZEXPORT inflateValidate(z_streamp, int); +ZEXTERN unsigned long ZEXPORT inflateCodesUsed(z_streamp); +ZEXTERN int ZEXPORT inflateResetKeep(z_streamp); +ZEXTERN int ZEXPORT deflateResetKeep(z_streamp); +#if defined(_WIN32) && !defined(Z_SOLO) +ZEXTERN gzFile ZEXPORT gzopen_w(const wchar_t *path, + const char *mode); +#endif +#if defined(STDC) || defined(Z_HAVE_STDARG_H) +# ifndef Z_SOLO +ZEXTERN int ZEXPORTVA gzvprintf(gzFile file, + const char *format, + va_list va); +# endif +#endif + +#ifdef __cplusplus +} +#endif + +#endif /* ZLIB_H */ diff --git a/dependencies/winx64/include/zstd.h b/dependencies/winx64/include/zstd.h new file mode 100644 index 0000000..8504694 --- /dev/null +++ b/dependencies/winx64/include/zstd.h @@ -0,0 +1,3209 @@ +/* + * Copyright (c) Meta Platforms, Inc. and affiliates. + * All rights reserved. + * + * This source code is licensed under both the BSD-style license (found in the + * LICENSE file in the root directory of this source tree) and the GPLv2 (found + * in the COPYING file in the root directory of this source tree). + * You may select, at your option, one of the above-listed licenses. + */ + +#ifndef ZSTD_H_235446 +#define ZSTD_H_235446 + + +/* ====== Dependencies ======*/ +#include /* size_t */ + +#include "zstd_errors.h" /* list of errors */ +#if defined(ZSTD_STATIC_LINKING_ONLY) && !defined(ZSTD_H_ZSTD_STATIC_LINKING_ONLY) +#include /* INT_MAX */ +#endif /* ZSTD_STATIC_LINKING_ONLY */ + +#if defined (__cplusplus) +extern "C" { +#endif + +/* ===== ZSTDLIB_API : control library symbols visibility ===== */ +#ifndef ZSTDLIB_VISIBLE + /* Backwards compatibility with old macro name */ +# ifdef ZSTDLIB_VISIBILITY +# define ZSTDLIB_VISIBLE ZSTDLIB_VISIBILITY +# elif defined(__GNUC__) && (__GNUC__ >= 4) && !defined(__MINGW32__) +# define ZSTDLIB_VISIBLE __attribute__ ((visibility ("default"))) +# else +# define ZSTDLIB_VISIBLE +# endif +#endif + +#ifndef ZSTDLIB_HIDDEN +# if defined(__GNUC__) && (__GNUC__ >= 4) && !defined(__MINGW32__) +# define ZSTDLIB_HIDDEN __attribute__ ((visibility ("hidden"))) +# else +# define ZSTDLIB_HIDDEN +# endif +#endif + +#if defined(ZSTD_DLL_EXPORT) && (ZSTD_DLL_EXPORT==1) +# define ZSTDLIB_API __declspec(dllexport) ZSTDLIB_VISIBLE +#elif defined(ZSTD_DLL_IMPORT) && (ZSTD_DLL_IMPORT==1) +# define ZSTDLIB_API __declspec(dllimport) ZSTDLIB_VISIBLE /* It isn't required but allows to generate better code, saving a function pointer load from the IAT and an indirect jump.*/ +#else +# define ZSTDLIB_API ZSTDLIB_VISIBLE +#endif + +/* Deprecation warnings : + * Should these warnings be a problem, it is generally possible to disable them, + * typically with -Wno-deprecated-declarations for gcc or _CRT_SECURE_NO_WARNINGS in Visual. + * Otherwise, it's also possible to define ZSTD_DISABLE_DEPRECATE_WARNINGS. + */ +#ifdef ZSTD_DISABLE_DEPRECATE_WARNINGS +# define ZSTD_DEPRECATED(message) /* disable deprecation warnings */ +#else +# if defined (__cplusplus) && (__cplusplus >= 201402) /* C++14 or greater */ +# define ZSTD_DEPRECATED(message) [[deprecated(message)]] +# elif (defined(GNUC) && (GNUC > 4 || (GNUC == 4 && GNUC_MINOR >= 5))) || defined(__clang__) || defined(__IAR_SYSTEMS_ICC__) +# define ZSTD_DEPRECATED(message) __attribute__((deprecated(message))) +# elif defined(__GNUC__) && (__GNUC__ >= 3) +# define ZSTD_DEPRECATED(message) __attribute__((deprecated)) +# elif defined(_MSC_VER) +# define ZSTD_DEPRECATED(message) __declspec(deprecated(message)) +# else +# pragma message("WARNING: You need to implement ZSTD_DEPRECATED for this compiler") +# define ZSTD_DEPRECATED(message) +# endif +#endif /* ZSTD_DISABLE_DEPRECATE_WARNINGS */ + + +/******************************************************************************* + Introduction + + zstd, short for Zstandard, is a fast lossless compression algorithm, targeting + real-time compression scenarios at zlib-level and better compression ratios. + The zstd compression library provides in-memory compression and decompression + functions. + + The library supports regular compression levels from 1 up to ZSTD_maxCLevel(), + which is currently 22. Levels >= 20, labeled `--ultra`, should be used with + caution, as they require more memory. The library also offers negative + compression levels, which extend the range of speed vs. ratio preferences. + The lower the level, the faster the speed (at the cost of compression). + + Compression can be done in: + - a single step (described as Simple API) + - a single step, reusing a context (described as Explicit context) + - unbounded multiple steps (described as Streaming compression) + + The compression ratio achievable on small data can be highly improved using + a dictionary. Dictionary compression can be performed in: + - a single step (described as Simple dictionary API) + - a single step, reusing a dictionary (described as Bulk-processing + dictionary API) + + Advanced experimental functions can be accessed using + `#define ZSTD_STATIC_LINKING_ONLY` before including zstd.h. + + Advanced experimental APIs should never be used with a dynamically-linked + library. They are not "stable"; their definitions or signatures may change in + the future. Only static linking is allowed. +*******************************************************************************/ + +/*------ Version ------*/ +#define ZSTD_VERSION_MAJOR 1 +#define ZSTD_VERSION_MINOR 5 +#define ZSTD_VERSION_RELEASE 8 +#define ZSTD_VERSION_NUMBER (ZSTD_VERSION_MAJOR *100*100 + ZSTD_VERSION_MINOR *100 + ZSTD_VERSION_RELEASE) + +/*! ZSTD_versionNumber() : + * Return runtime library version, the value is (MAJOR*100*100 + MINOR*100 + RELEASE). */ +ZSTDLIB_API unsigned ZSTD_versionNumber(void); + +#define ZSTD_LIB_VERSION ZSTD_VERSION_MAJOR.ZSTD_VERSION_MINOR.ZSTD_VERSION_RELEASE +#define ZSTD_QUOTE(str) #str +#define ZSTD_EXPAND_AND_QUOTE(str) ZSTD_QUOTE(str) +#define ZSTD_VERSION_STRING ZSTD_EXPAND_AND_QUOTE(ZSTD_LIB_VERSION) + +/*! ZSTD_versionString() : + * Return runtime library version, like "1.4.5". Requires v1.3.0+. */ +ZSTDLIB_API const char* ZSTD_versionString(void); + +/* ************************************* + * Default constant + ***************************************/ +#ifndef ZSTD_CLEVEL_DEFAULT +# define ZSTD_CLEVEL_DEFAULT 3 +#endif + +/* ************************************* + * Constants + ***************************************/ + +/* All magic numbers are supposed read/written to/from files/memory using little-endian convention */ +#define ZSTD_MAGICNUMBER 0xFD2FB528 /* valid since v0.8.0 */ +#define ZSTD_MAGIC_DICTIONARY 0xEC30A437 /* valid since v0.7.0 */ +#define ZSTD_MAGIC_SKIPPABLE_START 0x184D2A50 /* all 16 values, from 0x184D2A50 to 0x184D2A5F, signal the beginning of a skippable frame */ +#define ZSTD_MAGIC_SKIPPABLE_MASK 0xFFFFFFF0 + +#define ZSTD_BLOCKSIZELOG_MAX 17 +#define ZSTD_BLOCKSIZE_MAX (1<= ZSTD_compressBound(srcSize)` guarantees that zstd will have + * enough space to successfully compress the data. + * @return : compressed size written into `dst` (<= `dstCapacity), + * or an error code if it fails (which can be tested using ZSTD_isError()). */ +ZSTDLIB_API size_t ZSTD_compress( void* dst, size_t dstCapacity, + const void* src, size_t srcSize, + int compressionLevel); + +/*! ZSTD_decompress() : + * `compressedSize` : must be the _exact_ size of some number of compressed and/or skippable frames. + * Multiple compressed frames can be decompressed at once with this method. + * The result will be the concatenation of all decompressed frames, back to back. + * `dstCapacity` is an upper bound of originalSize to regenerate. + * First frame's decompressed size can be extracted using ZSTD_getFrameContentSize(). + * If maximum upper bound isn't known, prefer using streaming mode to decompress data. + * @return : the number of bytes decompressed into `dst` (<= `dstCapacity`), + * or an errorCode if it fails (which can be tested using ZSTD_isError()). */ +ZSTDLIB_API size_t ZSTD_decompress( void* dst, size_t dstCapacity, + const void* src, size_t compressedSize); + + +/*====== Decompression helper functions ======*/ + +/*! ZSTD_getFrameContentSize() : requires v1.3.0+ + * `src` should point to the start of a ZSTD encoded frame. + * `srcSize` must be at least as large as the frame header. + * hint : any size >= `ZSTD_frameHeaderSize_max` is large enough. + * @return : - decompressed size of `src` frame content, if known + * - ZSTD_CONTENTSIZE_UNKNOWN if the size cannot be determined + * - ZSTD_CONTENTSIZE_ERROR if an error occurred (e.g. invalid magic number, srcSize too small) + * note 1 : a 0 return value means the frame is valid but "empty". + * When invoking this method on a skippable frame, it will return 0. + * note 2 : decompressed size is an optional field, it may not be present (typically in streaming mode). + * When `return==ZSTD_CONTENTSIZE_UNKNOWN`, data to decompress could be any size. + * In which case, it's necessary to use streaming mode to decompress data. + * Optionally, application can rely on some implicit limit, + * as ZSTD_decompress() only needs an upper bound of decompressed size. + * (For example, data could be necessarily cut into blocks <= 16 KB). + * note 3 : decompressed size is always present when compression is completed using single-pass functions, + * such as ZSTD_compress(), ZSTD_compressCCtx() ZSTD_compress_usingDict() or ZSTD_compress_usingCDict(). + * note 4 : decompressed size can be very large (64-bits value), + * potentially larger than what local system can handle as a single memory segment. + * In which case, it's necessary to use streaming mode to decompress data. + * note 5 : If source is untrusted, decompressed size could be wrong or intentionally modified. + * Always ensure return value fits within application's authorized limits. + * Each application can set its own limits. + * note 6 : This function replaces ZSTD_getDecompressedSize() */ +#define ZSTD_CONTENTSIZE_UNKNOWN (0ULL - 1) +#define ZSTD_CONTENTSIZE_ERROR (0ULL - 2) +ZSTDLIB_API unsigned long long ZSTD_getFrameContentSize(const void *src, size_t srcSize); + +/*! ZSTD_getDecompressedSize() (obsolete): + * This function is now obsolete, in favor of ZSTD_getFrameContentSize(). + * Both functions work the same way, but ZSTD_getDecompressedSize() blends + * "empty", "unknown" and "error" results to the same return value (0), + * while ZSTD_getFrameContentSize() gives them separate return values. + * @return : decompressed size of `src` frame content _if known and not empty_, 0 otherwise. */ +ZSTD_DEPRECATED("Replaced by ZSTD_getFrameContentSize") +ZSTDLIB_API unsigned long long ZSTD_getDecompressedSize(const void* src, size_t srcSize); + +/*! ZSTD_findFrameCompressedSize() : Requires v1.4.0+ + * `src` should point to the start of a ZSTD frame or skippable frame. + * `srcSize` must be >= first frame size + * @return : the compressed size of the first frame starting at `src`, + * suitable to pass as `srcSize` to `ZSTD_decompress` or similar, + * or an error code if input is invalid + * Note 1: this method is called _find*() because it's not enough to read the header, + * it may have to scan through the frame's content, to reach its end. + * Note 2: this method also works with Skippable Frames. In which case, + * it returns the size of the complete skippable frame, + * which is always equal to its content size + 8 bytes for headers. */ +ZSTDLIB_API size_t ZSTD_findFrameCompressedSize(const void* src, size_t srcSize); + + +/*====== Compression helper functions ======*/ + +/*! ZSTD_compressBound() : + * maximum compressed size in worst case single-pass scenario. + * When invoking `ZSTD_compress()`, or any other one-pass compression function, + * it's recommended to provide @dstCapacity >= ZSTD_compressBound(srcSize) + * as it eliminates one potential failure scenario, + * aka not enough room in dst buffer to write the compressed frame. + * Note : ZSTD_compressBound() itself can fail, if @srcSize >= ZSTD_MAX_INPUT_SIZE . + * In which case, ZSTD_compressBound() will return an error code + * which can be tested using ZSTD_isError(). + * + * ZSTD_COMPRESSBOUND() : + * same as ZSTD_compressBound(), but as a macro. + * It can be used to produce constants, which can be useful for static allocation, + * for example to size a static array on stack. + * Will produce constant value 0 if srcSize is too large. + */ +#define ZSTD_MAX_INPUT_SIZE ((sizeof(size_t)==8) ? 0xFF00FF00FF00FF00ULL : 0xFF00FF00U) +#define ZSTD_COMPRESSBOUND(srcSize) (((size_t)(srcSize) >= ZSTD_MAX_INPUT_SIZE) ? 0 : (srcSize) + ((srcSize)>>8) + (((srcSize) < (128<<10)) ? (((128<<10) - (srcSize)) >> 11) /* margin, from 64 to 0 */ : 0)) /* this formula ensures that bound(A) + bound(B) <= bound(A+B) as long as A and B >= 128 KB */ +ZSTDLIB_API size_t ZSTD_compressBound(size_t srcSize); /*!< maximum compressed size in worst case single-pass scenario */ + + +/*====== Error helper functions ======*/ +/* ZSTD_isError() : + * Most ZSTD_* functions returning a size_t value can be tested for error, + * using ZSTD_isError(). + * @return 1 if error, 0 otherwise + */ +ZSTDLIB_API unsigned ZSTD_isError(size_t result); /*!< tells if a `size_t` function result is an error code */ +ZSTDLIB_API ZSTD_ErrorCode ZSTD_getErrorCode(size_t functionResult); /* convert a result into an error code, which can be compared to error enum list */ +ZSTDLIB_API const char* ZSTD_getErrorName(size_t result); /*!< provides readable string from a function result */ +ZSTDLIB_API int ZSTD_minCLevel(void); /*!< minimum negative compression level allowed, requires v1.4.0+ */ +ZSTDLIB_API int ZSTD_maxCLevel(void); /*!< maximum compression level available */ +ZSTDLIB_API int ZSTD_defaultCLevel(void); /*!< default compression level, specified by ZSTD_CLEVEL_DEFAULT, requires v1.5.0+ */ + + +/*************************************** +* Explicit context +***************************************/ +/*= Compression context + * When compressing many times, + * it is recommended to allocate a compression context just once, + * and reuse it for each successive compression operation. + * This will make the workload easier for system's memory. + * Note : re-using context is just a speed / resource optimization. + * It doesn't change the compression ratio, which remains identical. + * Note 2: For parallel execution in multi-threaded environments, + * use one different context per thread . + */ +typedef struct ZSTD_CCtx_s ZSTD_CCtx; +ZSTDLIB_API ZSTD_CCtx* ZSTD_createCCtx(void); +ZSTDLIB_API size_t ZSTD_freeCCtx(ZSTD_CCtx* cctx); /* compatible with NULL pointer */ + +/*! ZSTD_compressCCtx() : + * Same as ZSTD_compress(), using an explicit ZSTD_CCtx. + * Important : in order to mirror `ZSTD_compress()` behavior, + * this function compresses at the requested compression level, + * __ignoring any other advanced parameter__ . + * If any advanced parameter was set using the advanced API, + * they will all be reset. Only @compressionLevel remains. + */ +ZSTDLIB_API size_t ZSTD_compressCCtx(ZSTD_CCtx* cctx, + void* dst, size_t dstCapacity, + const void* src, size_t srcSize, + int compressionLevel); + +/*= Decompression context + * When decompressing many times, + * it is recommended to allocate a context only once, + * and reuse it for each successive compression operation. + * This will make workload friendlier for system's memory. + * Use one context per thread for parallel execution. */ +typedef struct ZSTD_DCtx_s ZSTD_DCtx; +ZSTDLIB_API ZSTD_DCtx* ZSTD_createDCtx(void); +ZSTDLIB_API size_t ZSTD_freeDCtx(ZSTD_DCtx* dctx); /* accept NULL pointer */ + +/*! ZSTD_decompressDCtx() : + * Same as ZSTD_decompress(), + * requires an allocated ZSTD_DCtx. + * Compatible with sticky parameters (see below). + */ +ZSTDLIB_API size_t ZSTD_decompressDCtx(ZSTD_DCtx* dctx, + void* dst, size_t dstCapacity, + const void* src, size_t srcSize); + + +/********************************************* +* Advanced compression API (Requires v1.4.0+) +**********************************************/ + +/* API design : + * Parameters are pushed one by one into an existing context, + * using ZSTD_CCtx_set*() functions. + * Pushed parameters are sticky : they are valid for next compressed frame, and any subsequent frame. + * "sticky" parameters are applicable to `ZSTD_compress2()` and `ZSTD_compressStream*()` ! + * __They do not apply to one-shot variants such as ZSTD_compressCCtx()__ . + * + * It's possible to reset all parameters to "default" using ZSTD_CCtx_reset(). + * + * This API supersedes all other "advanced" API entry points in the experimental section. + * In the future, we expect to remove API entry points from experimental which are redundant with this API. + */ + + +/* Compression strategies, listed from fastest to strongest */ +typedef enum { ZSTD_fast=1, + ZSTD_dfast=2, + ZSTD_greedy=3, + ZSTD_lazy=4, + ZSTD_lazy2=5, + ZSTD_btlazy2=6, + ZSTD_btopt=7, + ZSTD_btultra=8, + ZSTD_btultra2=9 + /* note : new strategies _might_ be added in the future. + Only the order (from fast to strong) is guaranteed */ +} ZSTD_strategy; + +typedef enum { + + /* compression parameters + * Note: When compressing with a ZSTD_CDict these parameters are superseded + * by the parameters used to construct the ZSTD_CDict. + * See ZSTD_CCtx_refCDict() for more info (superseded-by-cdict). */ + ZSTD_c_compressionLevel=100, /* Set compression parameters according to pre-defined cLevel table. + * Note that exact compression parameters are dynamically determined, + * depending on both compression level and srcSize (when known). + * Default level is ZSTD_CLEVEL_DEFAULT==3. + * Special: value 0 means default, which is controlled by ZSTD_CLEVEL_DEFAULT. + * Note 1 : it's possible to pass a negative compression level. + * Note 2 : setting a level does not automatically set all other compression parameters + * to default. Setting this will however eventually dynamically impact the compression + * parameters which have not been manually set. The manually set + * ones will 'stick'. */ + /* Advanced compression parameters : + * It's possible to pin down compression parameters to some specific values. + * In which case, these values are no longer dynamically selected by the compressor */ + ZSTD_c_windowLog=101, /* Maximum allowed back-reference distance, expressed as power of 2. + * This will set a memory budget for streaming decompression, + * with larger values requiring more memory + * and typically compressing more. + * Must be clamped between ZSTD_WINDOWLOG_MIN and ZSTD_WINDOWLOG_MAX. + * Special: value 0 means "use default windowLog". + * Note: Using a windowLog greater than ZSTD_WINDOWLOG_LIMIT_DEFAULT + * requires explicitly allowing such size at streaming decompression stage. */ + ZSTD_c_hashLog=102, /* Size of the initial probe table, as a power of 2. + * Resulting memory usage is (1 << (hashLog+2)). + * Must be clamped between ZSTD_HASHLOG_MIN and ZSTD_HASHLOG_MAX. + * Larger tables improve compression ratio of strategies <= dFast, + * and improve speed of strategies > dFast. + * Special: value 0 means "use default hashLog". */ + ZSTD_c_chainLog=103, /* Size of the multi-probe search table, as a power of 2. + * Resulting memory usage is (1 << (chainLog+2)). + * Must be clamped between ZSTD_CHAINLOG_MIN and ZSTD_CHAINLOG_MAX. + * Larger tables result in better and slower compression. + * This parameter is useless for "fast" strategy. + * It's still useful when using "dfast" strategy, + * in which case it defines a secondary probe table. + * Special: value 0 means "use default chainLog". */ + ZSTD_c_searchLog=104, /* Number of search attempts, as a power of 2. + * More attempts result in better and slower compression. + * This parameter is useless for "fast" and "dFast" strategies. + * Special: value 0 means "use default searchLog". */ + ZSTD_c_minMatch=105, /* Minimum size of searched matches. + * Note that Zstandard can still find matches of smaller size, + * it just tweaks its search algorithm to look for this size and larger. + * Larger values increase compression and decompression speed, but decrease ratio. + * Must be clamped between ZSTD_MINMATCH_MIN and ZSTD_MINMATCH_MAX. + * Note that currently, for all strategies < btopt, effective minimum is 4. + * , for all strategies > fast, effective maximum is 6. + * Special: value 0 means "use default minMatchLength". */ + ZSTD_c_targetLength=106, /* Impact of this field depends on strategy. + * For strategies btopt, btultra & btultra2: + * Length of Match considered "good enough" to stop search. + * Larger values make compression stronger, and slower. + * For strategy fast: + * Distance between match sampling. + * Larger values make compression faster, and weaker. + * Special: value 0 means "use default targetLength". */ + ZSTD_c_strategy=107, /* See ZSTD_strategy enum definition. + * The higher the value of selected strategy, the more complex it is, + * resulting in stronger and slower compression. + * Special: value 0 means "use default strategy". */ + + ZSTD_c_targetCBlockSize=130, /* v1.5.6+ + * Attempts to fit compressed block size into approximately targetCBlockSize. + * Bound by ZSTD_TARGETCBLOCKSIZE_MIN and ZSTD_TARGETCBLOCKSIZE_MAX. + * Note that it's not a guarantee, just a convergence target (default:0). + * No target when targetCBlockSize == 0. + * This is helpful in low bandwidth streaming environments to improve end-to-end latency, + * when a client can make use of partial documents (a prominent example being Chrome). + * Note: this parameter is stable since v1.5.6. + * It was present as an experimental parameter in earlier versions, + * but it's not recommended using it with earlier library versions + * due to massive performance regressions. + */ + /* LDM mode parameters */ + ZSTD_c_enableLongDistanceMatching=160, /* Enable long distance matching. + * This parameter is designed to improve compression ratio + * for large inputs, by finding large matches at long distance. + * It increases memory usage and window size. + * Note: enabling this parameter increases default ZSTD_c_windowLog to 128 MB + * except when expressly set to a different value. + * Note: will be enabled by default if ZSTD_c_windowLog >= 128 MB and + * compression strategy >= ZSTD_btopt (== compression level 16+) */ + ZSTD_c_ldmHashLog=161, /* Size of the table for long distance matching, as a power of 2. + * Larger values increase memory usage and compression ratio, + * but decrease compression speed. + * Must be clamped between ZSTD_HASHLOG_MIN and ZSTD_HASHLOG_MAX + * default: windowlog - 7. + * Special: value 0 means "automatically determine hashlog". */ + ZSTD_c_ldmMinMatch=162, /* Minimum match size for long distance matcher. + * Larger/too small values usually decrease compression ratio. + * Must be clamped between ZSTD_LDM_MINMATCH_MIN and ZSTD_LDM_MINMATCH_MAX. + * Special: value 0 means "use default value" (default: 64). */ + ZSTD_c_ldmBucketSizeLog=163, /* Log size of each bucket in the LDM hash table for collision resolution. + * Larger values improve collision resolution but decrease compression speed. + * The maximum value is ZSTD_LDM_BUCKETSIZELOG_MAX. + * Special: value 0 means "use default value" (default: 3). */ + ZSTD_c_ldmHashRateLog=164, /* Frequency of inserting/looking up entries into the LDM hash table. + * Must be clamped between 0 and (ZSTD_WINDOWLOG_MAX - ZSTD_HASHLOG_MIN). + * Default is MAX(0, (windowLog - ldmHashLog)), optimizing hash table usage. + * Larger values improve compression speed. + * Deviating far from default value will likely result in a compression ratio decrease. + * Special: value 0 means "automatically determine hashRateLog". */ + + /* frame parameters */ + ZSTD_c_contentSizeFlag=200, /* Content size will be written into frame header _whenever known_ (default:1) + * Content size must be known at the beginning of compression. + * This is automatically the case when using ZSTD_compress2(), + * For streaming scenarios, content size must be provided with ZSTD_CCtx_setPledgedSrcSize() */ + ZSTD_c_checksumFlag=201, /* A 32-bits checksum of content is written at end of frame (default:0) */ + ZSTD_c_dictIDFlag=202, /* When applicable, dictionary's ID is written into frame header (default:1) */ + + /* multi-threading parameters */ + /* These parameters are only active if multi-threading is enabled (compiled with build macro ZSTD_MULTITHREAD). + * Otherwise, trying to set any other value than default (0) will be a no-op and return an error. + * In a situation where it's unknown if the linked library supports multi-threading or not, + * setting ZSTD_c_nbWorkers to any value >= 1 and consulting the return value provides a quick way to check this property. + */ + ZSTD_c_nbWorkers=400, /* Select how many threads will be spawned to compress in parallel. + * When nbWorkers >= 1, triggers asynchronous mode when invoking ZSTD_compressStream*() : + * ZSTD_compressStream*() consumes input and flush output if possible, but immediately gives back control to caller, + * while compression is performed in parallel, within worker thread(s). + * (note : a strong exception to this rule is when first invocation of ZSTD_compressStream2() sets ZSTD_e_end : + * in which case, ZSTD_compressStream2() delegates to ZSTD_compress2(), which is always a blocking call). + * More workers improve speed, but also increase memory usage. + * Default value is `0`, aka "single-threaded mode" : no worker is spawned, + * compression is performed inside Caller's thread, and all invocations are blocking */ + ZSTD_c_jobSize=401, /* Size of a compression job. This value is enforced only when nbWorkers >= 1. + * Each compression job is completed in parallel, so this value can indirectly impact the nb of active threads. + * 0 means default, which is dynamically determined based on compression parameters. + * Job size must be a minimum of overlap size, or ZSTDMT_JOBSIZE_MIN (= 512 KB), whichever is largest. + * The minimum size is automatically and transparently enforced. */ + ZSTD_c_overlapLog=402, /* Control the overlap size, as a fraction of window size. + * The overlap size is an amount of data reloaded from previous job at the beginning of a new job. + * It helps preserve compression ratio, while each job is compressed in parallel. + * This value is enforced only when nbWorkers >= 1. + * Larger values increase compression ratio, but decrease speed. + * Possible values range from 0 to 9 : + * - 0 means "default" : value will be determined by the library, depending on strategy + * - 1 means "no overlap" + * - 9 means "full overlap", using a full window size. + * Each intermediate rank increases/decreases load size by a factor 2 : + * 9: full window; 8: w/2; 7: w/4; 6: w/8; 5:w/16; 4: w/32; 3:w/64; 2:w/128; 1:no overlap; 0:default + * default value varies between 6 and 9, depending on strategy */ + + /* note : additional experimental parameters are also available + * within the experimental section of the API. + * At the time of this writing, they include : + * ZSTD_c_rsyncable + * ZSTD_c_format + * ZSTD_c_forceMaxWindow + * ZSTD_c_forceAttachDict + * ZSTD_c_literalCompressionMode + * ZSTD_c_srcSizeHint + * ZSTD_c_enableDedicatedDictSearch + * ZSTD_c_stableInBuffer + * ZSTD_c_stableOutBuffer + * ZSTD_c_blockDelimiters + * ZSTD_c_validateSequences + * ZSTD_c_blockSplitterLevel + * ZSTD_c_splitAfterSequences + * ZSTD_c_useRowMatchFinder + * ZSTD_c_prefetchCDictTables + * ZSTD_c_enableSeqProducerFallback + * ZSTD_c_maxBlockSize + * Because they are not stable, it's necessary to define ZSTD_STATIC_LINKING_ONLY to access them. + * note : never ever use experimentalParam? names directly; + * also, the enums values themselves are unstable and can still change. + */ + ZSTD_c_experimentalParam1=500, + ZSTD_c_experimentalParam2=10, + ZSTD_c_experimentalParam3=1000, + ZSTD_c_experimentalParam4=1001, + ZSTD_c_experimentalParam5=1002, + /* was ZSTD_c_experimentalParam6=1003; is now ZSTD_c_targetCBlockSize */ + ZSTD_c_experimentalParam7=1004, + ZSTD_c_experimentalParam8=1005, + ZSTD_c_experimentalParam9=1006, + ZSTD_c_experimentalParam10=1007, + ZSTD_c_experimentalParam11=1008, + ZSTD_c_experimentalParam12=1009, + ZSTD_c_experimentalParam13=1010, + ZSTD_c_experimentalParam14=1011, + ZSTD_c_experimentalParam15=1012, + ZSTD_c_experimentalParam16=1013, + ZSTD_c_experimentalParam17=1014, + ZSTD_c_experimentalParam18=1015, + ZSTD_c_experimentalParam19=1016, + ZSTD_c_experimentalParam20=1017 +} ZSTD_cParameter; + +typedef struct { + size_t error; + int lowerBound; + int upperBound; +} ZSTD_bounds; + +/*! ZSTD_cParam_getBounds() : + * All parameters must belong to an interval with lower and upper bounds, + * otherwise they will either trigger an error or be automatically clamped. + * @return : a structure, ZSTD_bounds, which contains + * - an error status field, which must be tested using ZSTD_isError() + * - lower and upper bounds, both inclusive + */ +ZSTDLIB_API ZSTD_bounds ZSTD_cParam_getBounds(ZSTD_cParameter cParam); + +/*! ZSTD_CCtx_setParameter() : + * Set one compression parameter, selected by enum ZSTD_cParameter. + * All parameters have valid bounds. Bounds can be queried using ZSTD_cParam_getBounds(). + * Providing a value beyond bound will either clamp it, or trigger an error (depending on parameter). + * Setting a parameter is generally only possible during frame initialization (before starting compression). + * Exception : when using multi-threading mode (nbWorkers >= 1), + * the following parameters can be updated _during_ compression (within same frame): + * => compressionLevel, hashLog, chainLog, searchLog, minMatch, targetLength and strategy. + * new parameters will be active for next job only (after a flush()). + * @return : an error code (which can be tested using ZSTD_isError()). + */ +ZSTDLIB_API size_t ZSTD_CCtx_setParameter(ZSTD_CCtx* cctx, ZSTD_cParameter param, int value); + +/*! ZSTD_CCtx_setPledgedSrcSize() : + * Total input data size to be compressed as a single frame. + * Value will be written in frame header, unless if explicitly forbidden using ZSTD_c_contentSizeFlag. + * This value will also be controlled at end of frame, and trigger an error if not respected. + * @result : 0, or an error code (which can be tested with ZSTD_isError()). + * Note 1 : pledgedSrcSize==0 actually means zero, aka an empty frame. + * In order to mean "unknown content size", pass constant ZSTD_CONTENTSIZE_UNKNOWN. + * ZSTD_CONTENTSIZE_UNKNOWN is default value for any new frame. + * Note 2 : pledgedSrcSize is only valid once, for the next frame. + * It's discarded at the end of the frame, and replaced by ZSTD_CONTENTSIZE_UNKNOWN. + * Note 3 : Whenever all input data is provided and consumed in a single round, + * for example with ZSTD_compress2(), + * or invoking immediately ZSTD_compressStream2(,,,ZSTD_e_end), + * this value is automatically overridden by srcSize instead. + */ +ZSTDLIB_API size_t ZSTD_CCtx_setPledgedSrcSize(ZSTD_CCtx* cctx, unsigned long long pledgedSrcSize); + +typedef enum { + ZSTD_reset_session_only = 1, + ZSTD_reset_parameters = 2, + ZSTD_reset_session_and_parameters = 3 +} ZSTD_ResetDirective; + +/*! ZSTD_CCtx_reset() : + * There are 2 different things that can be reset, independently or jointly : + * - The session : will stop compressing current frame, and make CCtx ready to start a new one. + * Useful after an error, or to interrupt any ongoing compression. + * Any internal data not yet flushed is cancelled. + * Compression parameters and dictionary remain unchanged. + * They will be used to compress next frame. + * Resetting session never fails. + * - The parameters : changes all parameters back to "default". + * This also removes any reference to any dictionary or external sequence producer. + * Parameters can only be changed between 2 sessions (i.e. no compression is currently ongoing) + * otherwise the reset fails, and function returns an error value (which can be tested using ZSTD_isError()) + * - Both : similar to resetting the session, followed by resetting parameters. + */ +ZSTDLIB_API size_t ZSTD_CCtx_reset(ZSTD_CCtx* cctx, ZSTD_ResetDirective reset); + +/*! ZSTD_compress2() : + * Behave the same as ZSTD_compressCCtx(), but compression parameters are set using the advanced API. + * (note that this entry point doesn't even expose a compression level parameter). + * ZSTD_compress2() always starts a new frame. + * Should cctx hold data from a previously unfinished frame, everything about it is forgotten. + * - Compression parameters are pushed into CCtx before starting compression, using ZSTD_CCtx_set*() + * - The function is always blocking, returns when compression is completed. + * NOTE: Providing `dstCapacity >= ZSTD_compressBound(srcSize)` guarantees that zstd will have + * enough space to successfully compress the data, though it is possible it fails for other reasons. + * @return : compressed size written into `dst` (<= `dstCapacity), + * or an error code if it fails (which can be tested using ZSTD_isError()). + */ +ZSTDLIB_API size_t ZSTD_compress2( ZSTD_CCtx* cctx, + void* dst, size_t dstCapacity, + const void* src, size_t srcSize); + + +/*********************************************** +* Advanced decompression API (Requires v1.4.0+) +************************************************/ + +/* The advanced API pushes parameters one by one into an existing DCtx context. + * Parameters are sticky, and remain valid for all following frames + * using the same DCtx context. + * It's possible to reset parameters to default values using ZSTD_DCtx_reset(). + * Note : This API is compatible with existing ZSTD_decompressDCtx() and ZSTD_decompressStream(). + * Therefore, no new decompression function is necessary. + */ + +typedef enum { + + ZSTD_d_windowLogMax=100, /* Select a size limit (in power of 2) beyond which + * the streaming API will refuse to allocate memory buffer + * in order to protect the host from unreasonable memory requirements. + * This parameter is only useful in streaming mode, since no internal buffer is allocated in single-pass mode. + * By default, a decompression context accepts window sizes <= (1 << ZSTD_WINDOWLOG_LIMIT_DEFAULT). + * Special: value 0 means "use default maximum windowLog". */ + + /* note : additional experimental parameters are also available + * within the experimental section of the API. + * At the time of this writing, they include : + * ZSTD_d_format + * ZSTD_d_stableOutBuffer + * ZSTD_d_forceIgnoreChecksum + * ZSTD_d_refMultipleDDicts + * ZSTD_d_disableHuffmanAssembly + * ZSTD_d_maxBlockSize + * Because they are not stable, it's necessary to define ZSTD_STATIC_LINKING_ONLY to access them. + * note : never ever use experimentalParam? names directly + */ + ZSTD_d_experimentalParam1=1000, + ZSTD_d_experimentalParam2=1001, + ZSTD_d_experimentalParam3=1002, + ZSTD_d_experimentalParam4=1003, + ZSTD_d_experimentalParam5=1004, + ZSTD_d_experimentalParam6=1005 + +} ZSTD_dParameter; + +/*! ZSTD_dParam_getBounds() : + * All parameters must belong to an interval with lower and upper bounds, + * otherwise they will either trigger an error or be automatically clamped. + * @return : a structure, ZSTD_bounds, which contains + * - an error status field, which must be tested using ZSTD_isError() + * - both lower and upper bounds, inclusive + */ +ZSTDLIB_API ZSTD_bounds ZSTD_dParam_getBounds(ZSTD_dParameter dParam); + +/*! ZSTD_DCtx_setParameter() : + * Set one compression parameter, selected by enum ZSTD_dParameter. + * All parameters have valid bounds. Bounds can be queried using ZSTD_dParam_getBounds(). + * Providing a value beyond bound will either clamp it, or trigger an error (depending on parameter). + * Setting a parameter is only possible during frame initialization (before starting decompression). + * @return : 0, or an error code (which can be tested using ZSTD_isError()). + */ +ZSTDLIB_API size_t ZSTD_DCtx_setParameter(ZSTD_DCtx* dctx, ZSTD_dParameter param, int value); + +/*! ZSTD_DCtx_reset() : + * Return a DCtx to clean state. + * Session and parameters can be reset jointly or separately. + * Parameters can only be reset when no active frame is being decompressed. + * @return : 0, or an error code, which can be tested with ZSTD_isError() + */ +ZSTDLIB_API size_t ZSTD_DCtx_reset(ZSTD_DCtx* dctx, ZSTD_ResetDirective reset); + + +/**************************** +* Streaming +****************************/ + +typedef struct ZSTD_inBuffer_s { + const void* src; /**< start of input buffer */ + size_t size; /**< size of input buffer */ + size_t pos; /**< position where reading stopped. Will be updated. Necessarily 0 <= pos <= size */ +} ZSTD_inBuffer; + +typedef struct ZSTD_outBuffer_s { + void* dst; /**< start of output buffer */ + size_t size; /**< size of output buffer */ + size_t pos; /**< position where writing stopped. Will be updated. Necessarily 0 <= pos <= size */ +} ZSTD_outBuffer; + + + +/*-*********************************************************************** +* Streaming compression - HowTo +* +* A ZSTD_CStream object is required to track streaming operation. +* Use ZSTD_createCStream() and ZSTD_freeCStream() to create/release resources. +* ZSTD_CStream objects can be reused multiple times on consecutive compression operations. +* It is recommended to reuse ZSTD_CStream since it will play nicer with system's memory, by re-using already allocated memory. +* +* For parallel execution, use one separate ZSTD_CStream per thread. +* +* note : since v1.3.0, ZSTD_CStream and ZSTD_CCtx are the same thing. +* +* Parameters are sticky : when starting a new compression on the same context, +* it will reuse the same sticky parameters as previous compression session. +* When in doubt, it's recommended to fully initialize the context before usage. +* Use ZSTD_CCtx_reset() to reset the context and ZSTD_CCtx_setParameter(), +* ZSTD_CCtx_setPledgedSrcSize(), or ZSTD_CCtx_loadDictionary() and friends to +* set more specific parameters, the pledged source size, or load a dictionary. +* +* Use ZSTD_compressStream2() with ZSTD_e_continue as many times as necessary to +* consume input stream. The function will automatically update both `pos` +* fields within `input` and `output`. +* Note that the function may not consume the entire input, for example, because +* the output buffer is already full, in which case `input.pos < input.size`. +* The caller must check if input has been entirely consumed. +* If not, the caller must make some room to receive more compressed data, +* and then present again remaining input data. +* note: ZSTD_e_continue is guaranteed to make some forward progress when called, +* but doesn't guarantee maximal forward progress. This is especially relevant +* when compressing with multiple threads. The call won't block if it can +* consume some input, but if it can't it will wait for some, but not all, +* output to be flushed. +* @return : provides a minimum amount of data remaining to be flushed from internal buffers +* or an error code, which can be tested using ZSTD_isError(). +* +* At any moment, it's possible to flush whatever data might remain stuck within internal buffer, +* using ZSTD_compressStream2() with ZSTD_e_flush. `output->pos` will be updated. +* Note that, if `output->size` is too small, a single invocation with ZSTD_e_flush might not be enough (return code > 0). +* In which case, make some room to receive more compressed data, and call again ZSTD_compressStream2() with ZSTD_e_flush. +* You must continue calling ZSTD_compressStream2() with ZSTD_e_flush until it returns 0, at which point you can change the +* operation. +* note: ZSTD_e_flush will flush as much output as possible, meaning when compressing with multiple threads, it will +* block until the flush is complete or the output buffer is full. +* @return : 0 if internal buffers are entirely flushed, +* >0 if some data still present within internal buffer (the value is minimal estimation of remaining size), +* or an error code, which can be tested using ZSTD_isError(). +* +* Calling ZSTD_compressStream2() with ZSTD_e_end instructs to finish a frame. +* It will perform a flush and write frame epilogue. +* The epilogue is required for decoders to consider a frame completed. +* flush operation is the same, and follows same rules as calling ZSTD_compressStream2() with ZSTD_e_flush. +* You must continue calling ZSTD_compressStream2() with ZSTD_e_end until it returns 0, at which point you are free to +* start a new frame. +* note: ZSTD_e_end will flush as much output as possible, meaning when compressing with multiple threads, it will +* block until the flush is complete or the output buffer is full. +* @return : 0 if frame fully completed and fully flushed, +* >0 if some data still present within internal buffer (the value is minimal estimation of remaining size), +* or an error code, which can be tested using ZSTD_isError(). +* +* *******************************************************************/ + +typedef ZSTD_CCtx ZSTD_CStream; /**< CCtx and CStream are now effectively same object (>= v1.3.0) */ + /* Continue to distinguish them for compatibility with older versions <= v1.2.0 */ +/*===== ZSTD_CStream management functions =====*/ +ZSTDLIB_API ZSTD_CStream* ZSTD_createCStream(void); +ZSTDLIB_API size_t ZSTD_freeCStream(ZSTD_CStream* zcs); /* accept NULL pointer */ + +/*===== Streaming compression functions =====*/ +typedef enum { + ZSTD_e_continue=0, /* collect more data, encoder decides when to output compressed result, for optimal compression ratio */ + ZSTD_e_flush=1, /* flush any data provided so far, + * it creates (at least) one new block, that can be decoded immediately on reception; + * frame will continue: any future data can still reference previously compressed data, improving compression. + * note : multithreaded compression will block to flush as much output as possible. */ + ZSTD_e_end=2 /* flush any remaining data _and_ close current frame. + * note that frame is only closed after compressed data is fully flushed (return value == 0). + * After that point, any additional data starts a new frame. + * note : each frame is independent (does not reference any content from previous frame). + : note : multithreaded compression will block to flush as much output as possible. */ +} ZSTD_EndDirective; + +/*! ZSTD_compressStream2() : Requires v1.4.0+ + * Behaves about the same as ZSTD_compressStream, with additional control on end directive. + * - Compression parameters are pushed into CCtx before starting compression, using ZSTD_CCtx_set*() + * - Compression parameters cannot be changed once compression is started (save a list of exceptions in multi-threading mode) + * - output->pos must be <= dstCapacity, input->pos must be <= srcSize + * - output->pos and input->pos will be updated. They are guaranteed to remain below their respective limit. + * - endOp must be a valid directive + * - When nbWorkers==0 (default), function is blocking : it completes its job before returning to caller. + * - When nbWorkers>=1, function is non-blocking : it copies a portion of input, distributes jobs to internal worker threads, flush to output whatever is available, + * and then immediately returns, just indicating that there is some data remaining to be flushed. + * The function nonetheless guarantees forward progress : it will return only after it reads or write at least 1+ byte. + * - Exception : if the first call requests a ZSTD_e_end directive and provides enough dstCapacity, the function delegates to ZSTD_compress2() which is always blocking. + * - @return provides a minimum amount of data remaining to be flushed from internal buffers + * or an error code, which can be tested using ZSTD_isError(). + * if @return != 0, flush is not fully completed, there is still some data left within internal buffers. + * This is useful for ZSTD_e_flush, since in this case more flushes are necessary to empty all buffers. + * For ZSTD_e_end, @return == 0 when internal buffers are fully flushed and frame is completed. + * - after a ZSTD_e_end directive, if internal buffer is not fully flushed (@return != 0), + * only ZSTD_e_end or ZSTD_e_flush operations are allowed. + * Before starting a new compression job, or changing compression parameters, + * it is required to fully flush internal buffers. + * - note: if an operation ends with an error, it may leave @cctx in an undefined state. + * Therefore, it's UB to invoke ZSTD_compressStream2() of ZSTD_compressStream() on such a state. + * In order to be re-employed after an error, a state must be reset, + * which can be done explicitly (ZSTD_CCtx_reset()), + * or is sometimes implied by methods starting a new compression job (ZSTD_initCStream(), ZSTD_compressCCtx()) + */ +ZSTDLIB_API size_t ZSTD_compressStream2( ZSTD_CCtx* cctx, + ZSTD_outBuffer* output, + ZSTD_inBuffer* input, + ZSTD_EndDirective endOp); + + +/* These buffer sizes are softly recommended. + * They are not required : ZSTD_compressStream*() happily accepts any buffer size, for both input and output. + * Respecting the recommended size just makes it a bit easier for ZSTD_compressStream*(), + * reducing the amount of memory shuffling and buffering, resulting in minor performance savings. + * + * However, note that these recommendations are from the perspective of a C caller program. + * If the streaming interface is invoked from some other language, + * especially managed ones such as Java or Go, through a foreign function interface such as jni or cgo, + * a major performance rule is to reduce crossing such interface to an absolute minimum. + * It's not rare that performance ends being spent more into the interface, rather than compression itself. + * In which cases, prefer using large buffers, as large as practical, + * for both input and output, to reduce the nb of roundtrips. + */ +ZSTDLIB_API size_t ZSTD_CStreamInSize(void); /**< recommended size for input buffer */ +ZSTDLIB_API size_t ZSTD_CStreamOutSize(void); /**< recommended size for output buffer. Guarantee to successfully flush at least one complete compressed block. */ + + +/* ***************************************************************************** + * This following is a legacy streaming API, available since v1.0+ . + * It can be replaced by ZSTD_CCtx_reset() and ZSTD_compressStream2(). + * It is redundant, but remains fully supported. + ******************************************************************************/ + +/*! + * Equivalent to: + * + * ZSTD_CCtx_reset(zcs, ZSTD_reset_session_only); + * ZSTD_CCtx_refCDict(zcs, NULL); // clear the dictionary (if any) + * ZSTD_CCtx_setParameter(zcs, ZSTD_c_compressionLevel, compressionLevel); + * + * Note that ZSTD_initCStream() clears any previously set dictionary. Use the new API + * to compress with a dictionary. + */ +ZSTDLIB_API size_t ZSTD_initCStream(ZSTD_CStream* zcs, int compressionLevel); +/*! + * Alternative for ZSTD_compressStream2(zcs, output, input, ZSTD_e_continue). + * NOTE: The return value is different. ZSTD_compressStream() returns a hint for + * the next read size (if non-zero and not an error). ZSTD_compressStream2() + * returns the minimum nb of bytes left to flush (if non-zero and not an error). + */ +ZSTDLIB_API size_t ZSTD_compressStream(ZSTD_CStream* zcs, ZSTD_outBuffer* output, ZSTD_inBuffer* input); +/*! Equivalent to ZSTD_compressStream2(zcs, output, &emptyInput, ZSTD_e_flush). */ +ZSTDLIB_API size_t ZSTD_flushStream(ZSTD_CStream* zcs, ZSTD_outBuffer* output); +/*! Equivalent to ZSTD_compressStream2(zcs, output, &emptyInput, ZSTD_e_end). */ +ZSTDLIB_API size_t ZSTD_endStream(ZSTD_CStream* zcs, ZSTD_outBuffer* output); + + +/*-*************************************************************************** +* Streaming decompression - HowTo +* +* A ZSTD_DStream object is required to track streaming operations. +* Use ZSTD_createDStream() and ZSTD_freeDStream() to create/release resources. +* ZSTD_DStream objects can be re-employed multiple times. +* +* Use ZSTD_initDStream() to start a new decompression operation. +* @return : recommended first input size +* Alternatively, use advanced API to set specific properties. +* +* Use ZSTD_decompressStream() repetitively to consume your input. +* The function will update both `pos` fields. +* If `input.pos < input.size`, some input has not been consumed. +* It's up to the caller to present again remaining data. +* +* The function tries to flush all data decoded immediately, respecting output buffer size. +* If `output.pos < output.size`, decoder has flushed everything it could. +* +* However, when `output.pos == output.size`, it's more difficult to know. +* If @return > 0, the frame is not complete, meaning +* either there is still some data left to flush within internal buffers, +* or there is more input to read to complete the frame (or both). +* In which case, call ZSTD_decompressStream() again to flush whatever remains in the buffer. +* Note : with no additional input provided, amount of data flushed is necessarily <= ZSTD_BLOCKSIZE_MAX. +* @return : 0 when a frame is completely decoded and fully flushed, +* or an error code, which can be tested using ZSTD_isError(), +* or any other value > 0, which means there is still some decoding or flushing to do to complete current frame : +* the return value is a suggested next input size (just a hint for better latency) +* that will never request more than the remaining content of the compressed frame. +* *******************************************************************************/ + +typedef ZSTD_DCtx ZSTD_DStream; /**< DCtx and DStream are now effectively same object (>= v1.3.0) */ + /* For compatibility with versions <= v1.2.0, prefer differentiating them. */ +/*===== ZSTD_DStream management functions =====*/ +ZSTDLIB_API ZSTD_DStream* ZSTD_createDStream(void); +ZSTDLIB_API size_t ZSTD_freeDStream(ZSTD_DStream* zds); /* accept NULL pointer */ + +/*===== Streaming decompression functions =====*/ + +/*! ZSTD_initDStream() : + * Initialize/reset DStream state for new decompression operation. + * Call before new decompression operation using same DStream. + * + * Note : This function is redundant with the advanced API and equivalent to: + * ZSTD_DCtx_reset(zds, ZSTD_reset_session_only); + * ZSTD_DCtx_refDDict(zds, NULL); + */ +ZSTDLIB_API size_t ZSTD_initDStream(ZSTD_DStream* zds); + +/*! ZSTD_decompressStream() : + * Streaming decompression function. + * Call repetitively to consume full input updating it as necessary. + * Function will update both input and output `pos` fields exposing current state via these fields: + * - `input.pos < input.size`, some input remaining and caller should provide remaining input + * on the next call. + * - `output.pos < output.size`, decoder flushed internal output buffer. + * - `output.pos == output.size`, unflushed data potentially present in the internal buffers, + * check ZSTD_decompressStream() @return value, + * if > 0, invoke it again to flush remaining data to output. + * Note : with no additional input, amount of data flushed <= ZSTD_BLOCKSIZE_MAX. + * + * @return : 0 when a frame is completely decoded and fully flushed, + * or an error code, which can be tested using ZSTD_isError(), + * or any other value > 0, which means there is some decoding or flushing to do to complete current frame. + * + * Note: when an operation returns with an error code, the @zds state may be left in undefined state. + * It's UB to invoke `ZSTD_decompressStream()` on such a state. + * In order to re-use such a state, it must be first reset, + * which can be done explicitly (`ZSTD_DCtx_reset()`), + * or is implied for operations starting some new decompression job (`ZSTD_initDStream`, `ZSTD_decompressDCtx()`, `ZSTD_decompress_usingDict()`) + */ +ZSTDLIB_API size_t ZSTD_decompressStream(ZSTD_DStream* zds, ZSTD_outBuffer* output, ZSTD_inBuffer* input); + +ZSTDLIB_API size_t ZSTD_DStreamInSize(void); /*!< recommended size for input buffer */ +ZSTDLIB_API size_t ZSTD_DStreamOutSize(void); /*!< recommended size for output buffer. Guarantee to successfully flush at least one complete block in all circumstances. */ + + +/************************** +* Simple dictionary API +***************************/ +/*! ZSTD_compress_usingDict() : + * Compression at an explicit compression level using a Dictionary. + * A dictionary can be any arbitrary data segment (also called a prefix), + * or a buffer with specified information (see zdict.h). + * Note : This function loads the dictionary, resulting in significant startup delay. + * It's intended for a dictionary used only once. + * Note 2 : When `dict == NULL || dictSize < 8` no dictionary is used. */ +ZSTDLIB_API size_t ZSTD_compress_usingDict(ZSTD_CCtx* ctx, + void* dst, size_t dstCapacity, + const void* src, size_t srcSize, + const void* dict,size_t dictSize, + int compressionLevel); + +/*! ZSTD_decompress_usingDict() : + * Decompression using a known Dictionary. + * Dictionary must be identical to the one used during compression. + * Note : This function loads the dictionary, resulting in significant startup delay. + * It's intended for a dictionary used only once. + * Note : When `dict == NULL || dictSize < 8` no dictionary is used. */ +ZSTDLIB_API size_t ZSTD_decompress_usingDict(ZSTD_DCtx* dctx, + void* dst, size_t dstCapacity, + const void* src, size_t srcSize, + const void* dict,size_t dictSize); + + +/*********************************** + * Bulk processing dictionary API + **********************************/ +typedef struct ZSTD_CDict_s ZSTD_CDict; + +/*! ZSTD_createCDict() : + * When compressing multiple messages or blocks using the same dictionary, + * it's recommended to digest the dictionary only once, since it's a costly operation. + * ZSTD_createCDict() will create a state from digesting a dictionary. + * The resulting state can be used for future compression operations with very limited startup cost. + * ZSTD_CDict can be created once and shared by multiple threads concurrently, since its usage is read-only. + * @dictBuffer can be released after ZSTD_CDict creation, because its content is copied within CDict. + * Note 1 : Consider experimental function `ZSTD_createCDict_byReference()` if you prefer to not duplicate @dictBuffer content. + * Note 2 : A ZSTD_CDict can be created from an empty @dictBuffer, + * in which case the only thing that it transports is the @compressionLevel. + * This can be useful in a pipeline featuring ZSTD_compress_usingCDict() exclusively, + * expecting a ZSTD_CDict parameter with any data, including those without a known dictionary. */ +ZSTDLIB_API ZSTD_CDict* ZSTD_createCDict(const void* dictBuffer, size_t dictSize, + int compressionLevel); + +/*! ZSTD_freeCDict() : + * Function frees memory allocated by ZSTD_createCDict(). + * If a NULL pointer is passed, no operation is performed. */ +ZSTDLIB_API size_t ZSTD_freeCDict(ZSTD_CDict* CDict); + +/*! ZSTD_compress_usingCDict() : + * Compression using a digested Dictionary. + * Recommended when same dictionary is used multiple times. + * Note : compression level is _decided at dictionary creation time_, + * and frame parameters are hardcoded (dictID=yes, contentSize=yes, checksum=no) */ +ZSTDLIB_API size_t ZSTD_compress_usingCDict(ZSTD_CCtx* cctx, + void* dst, size_t dstCapacity, + const void* src, size_t srcSize, + const ZSTD_CDict* cdict); + + +typedef struct ZSTD_DDict_s ZSTD_DDict; + +/*! ZSTD_createDDict() : + * Create a digested dictionary, ready to start decompression operation without startup delay. + * dictBuffer can be released after DDict creation, as its content is copied inside DDict. */ +ZSTDLIB_API ZSTD_DDict* ZSTD_createDDict(const void* dictBuffer, size_t dictSize); + +/*! ZSTD_freeDDict() : + * Function frees memory allocated with ZSTD_createDDict() + * If a NULL pointer is passed, no operation is performed. */ +ZSTDLIB_API size_t ZSTD_freeDDict(ZSTD_DDict* ddict); + +/*! ZSTD_decompress_usingDDict() : + * Decompression using a digested Dictionary. + * Recommended when same dictionary is used multiple times. */ +ZSTDLIB_API size_t ZSTD_decompress_usingDDict(ZSTD_DCtx* dctx, + void* dst, size_t dstCapacity, + const void* src, size_t srcSize, + const ZSTD_DDict* ddict); + + +/******************************** + * Dictionary helper functions + *******************************/ + +/*! ZSTD_getDictID_fromDict() : Requires v1.4.0+ + * Provides the dictID stored within dictionary. + * if @return == 0, the dictionary is not conformant with Zstandard specification. + * It can still be loaded, but as a content-only dictionary. */ +ZSTDLIB_API unsigned ZSTD_getDictID_fromDict(const void* dict, size_t dictSize); + +/*! ZSTD_getDictID_fromCDict() : Requires v1.5.0+ + * Provides the dictID of the dictionary loaded into `cdict`. + * If @return == 0, the dictionary is not conformant to Zstandard specification, or empty. + * Non-conformant dictionaries can still be loaded, but as content-only dictionaries. */ +ZSTDLIB_API unsigned ZSTD_getDictID_fromCDict(const ZSTD_CDict* cdict); + +/*! ZSTD_getDictID_fromDDict() : Requires v1.4.0+ + * Provides the dictID of the dictionary loaded into `ddict`. + * If @return == 0, the dictionary is not conformant to Zstandard specification, or empty. + * Non-conformant dictionaries can still be loaded, but as content-only dictionaries. */ +ZSTDLIB_API unsigned ZSTD_getDictID_fromDDict(const ZSTD_DDict* ddict); + +/*! ZSTD_getDictID_fromFrame() : Requires v1.4.0+ + * Provides the dictID required to decompressed the frame stored within `src`. + * If @return == 0, the dictID could not be decoded. + * This could for one of the following reasons : + * - The frame does not require a dictionary to be decoded (most common case). + * - The frame was built with dictID intentionally removed. Whatever dictionary is necessary is a hidden piece of information. + * Note : this use case also happens when using a non-conformant dictionary. + * - `srcSize` is too small, and as a result, the frame header could not be decoded (only possible if `srcSize < ZSTD_FRAMEHEADERSIZE_MAX`). + * - This is not a Zstandard frame. + * When identifying the exact failure cause, it's possible to use ZSTD_getFrameHeader(), which will provide a more precise error code. */ +ZSTDLIB_API unsigned ZSTD_getDictID_fromFrame(const void* src, size_t srcSize); + + +/******************************************************************************* + * Advanced dictionary and prefix API (Requires v1.4.0+) + * + * This API allows dictionaries to be used with ZSTD_compress2(), + * ZSTD_compressStream2(), and ZSTD_decompressDCtx(). + * Dictionaries are sticky, they remain valid when same context is reused, + * they only reset when the context is reset + * with ZSTD_reset_parameters or ZSTD_reset_session_and_parameters. + * In contrast, Prefixes are single-use. + ******************************************************************************/ + + +/*! ZSTD_CCtx_loadDictionary() : Requires v1.4.0+ + * Create an internal CDict from `dict` buffer. + * Decompression will have to use same dictionary. + * @result : 0, or an error code (which can be tested with ZSTD_isError()). + * Special: Loading a NULL (or 0-size) dictionary invalidates previous dictionary, + * meaning "return to no-dictionary mode". + * Note 1 : Dictionary is sticky, it will be used for all future compressed frames, + * until parameters are reset, a new dictionary is loaded, or the dictionary + * is explicitly invalidated by loading a NULL dictionary. + * Note 2 : Loading a dictionary involves building tables. + * It's also a CPU consuming operation, with non-negligible impact on latency. + * Tables are dependent on compression parameters, and for this reason, + * compression parameters can no longer be changed after loading a dictionary. + * Note 3 :`dict` content will be copied internally. + * Use experimental ZSTD_CCtx_loadDictionary_byReference() to reference content instead. + * In such a case, dictionary buffer must outlive its users. + * Note 4 : Use ZSTD_CCtx_loadDictionary_advanced() + * to precisely select how dictionary content must be interpreted. + * Note 5 : This method does not benefit from LDM (long distance mode). + * If you want to employ LDM on some large dictionary content, + * prefer employing ZSTD_CCtx_refPrefix() described below. + */ +ZSTDLIB_API size_t ZSTD_CCtx_loadDictionary(ZSTD_CCtx* cctx, const void* dict, size_t dictSize); + +/*! ZSTD_CCtx_refCDict() : Requires v1.4.0+ + * Reference a prepared dictionary, to be used for all future compressed frames. + * Note that compression parameters are enforced from within CDict, + * and supersede any compression parameter previously set within CCtx. + * The parameters ignored are labelled as "superseded-by-cdict" in the ZSTD_cParameter enum docs. + * The ignored parameters will be used again if the CCtx is returned to no-dictionary mode. + * The dictionary will remain valid for future compressed frames using same CCtx. + * @result : 0, or an error code (which can be tested with ZSTD_isError()). + * Special : Referencing a NULL CDict means "return to no-dictionary mode". + * Note 1 : Currently, only one dictionary can be managed. + * Referencing a new dictionary effectively "discards" any previous one. + * Note 2 : CDict is just referenced, its lifetime must outlive its usage within CCtx. */ +ZSTDLIB_API size_t ZSTD_CCtx_refCDict(ZSTD_CCtx* cctx, const ZSTD_CDict* cdict); + +/*! ZSTD_CCtx_refPrefix() : Requires v1.4.0+ + * Reference a prefix (single-usage dictionary) for next compressed frame. + * A prefix is **only used once**. Tables are discarded at end of frame (ZSTD_e_end). + * Decompression will need same prefix to properly regenerate data. + * Compressing with a prefix is similar in outcome as performing a diff and compressing it, + * but performs much faster, especially during decompression (compression speed is tunable with compression level). + * This method is compatible with LDM (long distance mode). + * @result : 0, or an error code (which can be tested with ZSTD_isError()). + * Special: Adding any prefix (including NULL) invalidates any previous prefix or dictionary + * Note 1 : Prefix buffer is referenced. It **must** outlive compression. + * Its content must remain unmodified during compression. + * Note 2 : If the intention is to diff some large src data blob with some prior version of itself, + * ensure that the window size is large enough to contain the entire source. + * See ZSTD_c_windowLog. + * Note 3 : Referencing a prefix involves building tables, which are dependent on compression parameters. + * It's a CPU consuming operation, with non-negligible impact on latency. + * If there is a need to use the same prefix multiple times, consider loadDictionary instead. + * Note 4 : By default, the prefix is interpreted as raw content (ZSTD_dct_rawContent). + * Use experimental ZSTD_CCtx_refPrefix_advanced() to alter dictionary interpretation. */ +ZSTDLIB_API size_t ZSTD_CCtx_refPrefix(ZSTD_CCtx* cctx, + const void* prefix, size_t prefixSize); + +/*! ZSTD_DCtx_loadDictionary() : Requires v1.4.0+ + * Create an internal DDict from dict buffer, to be used to decompress all future frames. + * The dictionary remains valid for all future frames, until explicitly invalidated, or + * a new dictionary is loaded. + * @result : 0, or an error code (which can be tested with ZSTD_isError()). + * Special : Adding a NULL (or 0-size) dictionary invalidates any previous dictionary, + * meaning "return to no-dictionary mode". + * Note 1 : Loading a dictionary involves building tables, + * which has a non-negligible impact on CPU usage and latency. + * It's recommended to "load once, use many times", to amortize the cost + * Note 2 :`dict` content will be copied internally, so `dict` can be released after loading. + * Use ZSTD_DCtx_loadDictionary_byReference() to reference dictionary content instead. + * Note 3 : Use ZSTD_DCtx_loadDictionary_advanced() to take control of + * how dictionary content is loaded and interpreted. + */ +ZSTDLIB_API size_t ZSTD_DCtx_loadDictionary(ZSTD_DCtx* dctx, const void* dict, size_t dictSize); + +/*! ZSTD_DCtx_refDDict() : Requires v1.4.0+ + * Reference a prepared dictionary, to be used to decompress next frames. + * The dictionary remains active for decompression of future frames using same DCtx. + * + * If called with ZSTD_d_refMultipleDDicts enabled, repeated calls of this function + * will store the DDict references in a table, and the DDict used for decompression + * will be determined at decompression time, as per the dict ID in the frame. + * The memory for the table is allocated on the first call to refDDict, and can be + * freed with ZSTD_freeDCtx(). + * + * If called with ZSTD_d_refMultipleDDicts disabled (the default), only one dictionary + * will be managed, and referencing a dictionary effectively "discards" any previous one. + * + * @result : 0, or an error code (which can be tested with ZSTD_isError()). + * Special: referencing a NULL DDict means "return to no-dictionary mode". + * Note 2 : DDict is just referenced, its lifetime must outlive its usage from DCtx. + */ +ZSTDLIB_API size_t ZSTD_DCtx_refDDict(ZSTD_DCtx* dctx, const ZSTD_DDict* ddict); + +/*! ZSTD_DCtx_refPrefix() : Requires v1.4.0+ + * Reference a prefix (single-usage dictionary) to decompress next frame. + * This is the reverse operation of ZSTD_CCtx_refPrefix(), + * and must use the same prefix as the one used during compression. + * Prefix is **only used once**. Reference is discarded at end of frame. + * End of frame is reached when ZSTD_decompressStream() returns 0. + * @result : 0, or an error code (which can be tested with ZSTD_isError()). + * Note 1 : Adding any prefix (including NULL) invalidates any previously set prefix or dictionary + * Note 2 : Prefix buffer is referenced. It **must** outlive decompression. + * Prefix buffer must remain unmodified up to the end of frame, + * reached when ZSTD_decompressStream() returns 0. + * Note 3 : By default, the prefix is treated as raw content (ZSTD_dct_rawContent). + * Use ZSTD_CCtx_refPrefix_advanced() to alter dictMode (Experimental section) + * Note 4 : Referencing a raw content prefix has almost no cpu nor memory cost. + * A full dictionary is more costly, as it requires building tables. + */ +ZSTDLIB_API size_t ZSTD_DCtx_refPrefix(ZSTD_DCtx* dctx, + const void* prefix, size_t prefixSize); + +/* === Memory management === */ + +/*! ZSTD_sizeof_*() : Requires v1.4.0+ + * These functions give the _current_ memory usage of selected object. + * Note that object memory usage can evolve (increase or decrease) over time. */ +ZSTDLIB_API size_t ZSTD_sizeof_CCtx(const ZSTD_CCtx* cctx); +ZSTDLIB_API size_t ZSTD_sizeof_DCtx(const ZSTD_DCtx* dctx); +ZSTDLIB_API size_t ZSTD_sizeof_CStream(const ZSTD_CStream* zcs); +ZSTDLIB_API size_t ZSTD_sizeof_DStream(const ZSTD_DStream* zds); +ZSTDLIB_API size_t ZSTD_sizeof_CDict(const ZSTD_CDict* cdict); +ZSTDLIB_API size_t ZSTD_sizeof_DDict(const ZSTD_DDict* ddict); + +#if defined (__cplusplus) +} +#endif + +#endif /* ZSTD_H_235446 */ + + +/* ************************************************************************************** + * ADVANCED AND EXPERIMENTAL FUNCTIONS + **************************************************************************************** + * The definitions in the following section are considered experimental. + * They are provided for advanced scenarios. + * They should never be used with a dynamic library, as prototypes may change in the future. + * Use them only in association with static linking. + * ***************************************************************************************/ + +#if defined(ZSTD_STATIC_LINKING_ONLY) && !defined(ZSTD_H_ZSTD_STATIC_LINKING_ONLY) +#define ZSTD_H_ZSTD_STATIC_LINKING_ONLY + +#if defined (__cplusplus) +extern "C" { +#endif + +/* This can be overridden externally to hide static symbols. */ +#ifndef ZSTDLIB_STATIC_API +# if defined(ZSTD_DLL_EXPORT) && (ZSTD_DLL_EXPORT==1) +# define ZSTDLIB_STATIC_API __declspec(dllexport) ZSTDLIB_VISIBLE +# elif defined(ZSTD_DLL_IMPORT) && (ZSTD_DLL_IMPORT==1) +# define ZSTDLIB_STATIC_API __declspec(dllimport) ZSTDLIB_VISIBLE +# else +# define ZSTDLIB_STATIC_API ZSTDLIB_VISIBLE +# endif +#endif + +/**************************************************************************************** + * experimental API (static linking only) + **************************************************************************************** + * The following symbols and constants + * are not planned to join "stable API" status in the near future. + * They can still change in future versions. + * Some of them are planned to remain in the static_only section indefinitely. + * Some of them might be removed in the future (especially when redundant with existing stable functions) + * ***************************************************************************************/ + +#define ZSTD_FRAMEHEADERSIZE_PREFIX(format) ((format) == ZSTD_f_zstd1 ? 5 : 1) /* minimum input size required to query frame header size */ +#define ZSTD_FRAMEHEADERSIZE_MIN(format) ((format) == ZSTD_f_zstd1 ? 6 : 2) +#define ZSTD_FRAMEHEADERSIZE_MAX 18 /* can be useful for static allocation */ +#define ZSTD_SKIPPABLEHEADERSIZE 8 + +/* compression parameter bounds */ +#define ZSTD_WINDOWLOG_MAX_32 30 +#define ZSTD_WINDOWLOG_MAX_64 31 +#define ZSTD_WINDOWLOG_MAX ((int)(sizeof(size_t) == 4 ? ZSTD_WINDOWLOG_MAX_32 : ZSTD_WINDOWLOG_MAX_64)) +#define ZSTD_WINDOWLOG_MIN 10 +#define ZSTD_HASHLOG_MAX ((ZSTD_WINDOWLOG_MAX < 30) ? ZSTD_WINDOWLOG_MAX : 30) +#define ZSTD_HASHLOG_MIN 6 +#define ZSTD_CHAINLOG_MAX_32 29 +#define ZSTD_CHAINLOG_MAX_64 30 +#define ZSTD_CHAINLOG_MAX ((int)(sizeof(size_t) == 4 ? ZSTD_CHAINLOG_MAX_32 : ZSTD_CHAINLOG_MAX_64)) +#define ZSTD_CHAINLOG_MIN ZSTD_HASHLOG_MIN +#define ZSTD_SEARCHLOG_MAX (ZSTD_WINDOWLOG_MAX-1) +#define ZSTD_SEARCHLOG_MIN 1 +#define ZSTD_MINMATCH_MAX 7 /* only for ZSTD_fast, other strategies are limited to 6 */ +#define ZSTD_MINMATCH_MIN 3 /* only for ZSTD_btopt+, faster strategies are limited to 4 */ +#define ZSTD_TARGETLENGTH_MAX ZSTD_BLOCKSIZE_MAX +#define ZSTD_TARGETLENGTH_MIN 0 /* note : comparing this constant to an unsigned results in a tautological test */ +#define ZSTD_STRATEGY_MIN ZSTD_fast +#define ZSTD_STRATEGY_MAX ZSTD_btultra2 +#define ZSTD_BLOCKSIZE_MAX_MIN (1 << 10) /* The minimum valid max blocksize. Maximum blocksizes smaller than this make compressBound() inaccurate. */ + + +#define ZSTD_OVERLAPLOG_MIN 0 +#define ZSTD_OVERLAPLOG_MAX 9 + +#define ZSTD_WINDOWLOG_LIMIT_DEFAULT 27 /* by default, the streaming decoder will refuse any frame + * requiring larger than (1< 0: + * If litLength != 0: + * rep == 1 --> offset == repeat_offset_1 + * rep == 2 --> offset == repeat_offset_2 + * rep == 3 --> offset == repeat_offset_3 + * If litLength == 0: + * rep == 1 --> offset == repeat_offset_2 + * rep == 2 --> offset == repeat_offset_3 + * rep == 3 --> offset == repeat_offset_1 - 1 + * + * Note: This field is optional. ZSTD_generateSequences() will calculate the value of + * 'rep', but repeat offsets do not necessarily need to be calculated from an external + * sequence provider perspective. For example, ZSTD_compressSequences() does not + * use this 'rep' field at all (as of now). + */ +} ZSTD_Sequence; + +typedef struct { + unsigned windowLog; /**< largest match distance : larger == more compression, more memory needed during decompression */ + unsigned chainLog; /**< fully searched segment : larger == more compression, slower, more memory (useless for fast) */ + unsigned hashLog; /**< dispatch table : larger == faster, more memory */ + unsigned searchLog; /**< nb of searches : larger == more compression, slower */ + unsigned minMatch; /**< match length searched : larger == faster decompression, sometimes less compression */ + unsigned targetLength; /**< acceptable match size for optimal parser (only) : larger == more compression, slower */ + ZSTD_strategy strategy; /**< see ZSTD_strategy definition above */ +} ZSTD_compressionParameters; + +typedef struct { + int contentSizeFlag; /**< 1: content size will be in frame header (when known) */ + int checksumFlag; /**< 1: generate a 32-bits checksum using XXH64 algorithm at end of frame, for error detection */ + int noDictIDFlag; /**< 1: no dictID will be saved into frame header (dictID is only useful for dictionary compression) */ +} ZSTD_frameParameters; + +typedef struct { + ZSTD_compressionParameters cParams; + ZSTD_frameParameters fParams; +} ZSTD_parameters; + +typedef enum { + ZSTD_dct_auto = 0, /* dictionary is "full" when starting with ZSTD_MAGIC_DICTIONARY, otherwise it is "rawContent" */ + ZSTD_dct_rawContent = 1, /* ensures dictionary is always loaded as rawContent, even if it starts with ZSTD_MAGIC_DICTIONARY */ + ZSTD_dct_fullDict = 2 /* refuses to load a dictionary if it does not respect Zstandard's specification, starting with ZSTD_MAGIC_DICTIONARY */ +} ZSTD_dictContentType_e; + +typedef enum { + ZSTD_dlm_byCopy = 0, /**< Copy dictionary content internally */ + ZSTD_dlm_byRef = 1 /**< Reference dictionary content -- the dictionary buffer must outlive its users. */ +} ZSTD_dictLoadMethod_e; + +typedef enum { + ZSTD_f_zstd1 = 0, /* zstd frame format, specified in zstd_compression_format.md (default) */ + ZSTD_f_zstd1_magicless = 1 /* Variant of zstd frame format, without initial 4-bytes magic number. + * Useful to save 4 bytes per generated frame. + * Decoder cannot recognise automatically this format, requiring this instruction. */ +} ZSTD_format_e; + +typedef enum { + /* Note: this enum controls ZSTD_d_forceIgnoreChecksum */ + ZSTD_d_validateChecksum = 0, + ZSTD_d_ignoreChecksum = 1 +} ZSTD_forceIgnoreChecksum_e; + +typedef enum { + /* Note: this enum controls ZSTD_d_refMultipleDDicts */ + ZSTD_rmd_refSingleDDict = 0, + ZSTD_rmd_refMultipleDDicts = 1 +} ZSTD_refMultipleDDicts_e; + +typedef enum { + /* Note: this enum and the behavior it controls are effectively internal + * implementation details of the compressor. They are expected to continue + * to evolve and should be considered only in the context of extremely + * advanced performance tuning. + * + * Zstd currently supports the use of a CDict in three ways: + * + * - The contents of the CDict can be copied into the working context. This + * means that the compression can search both the dictionary and input + * while operating on a single set of internal tables. This makes + * the compression faster per-byte of input. However, the initial copy of + * the CDict's tables incurs a fixed cost at the beginning of the + * compression. For small compressions (< 8 KB), that copy can dominate + * the cost of the compression. + * + * - The CDict's tables can be used in-place. In this model, compression is + * slower per input byte, because the compressor has to search two sets of + * tables. However, this model incurs no start-up cost (as long as the + * working context's tables can be reused). For small inputs, this can be + * faster than copying the CDict's tables. + * + * - The CDict's tables are not used at all, and instead we use the working + * context alone to reload the dictionary and use params based on the source + * size. See ZSTD_compress_insertDictionary() and ZSTD_compress_usingDict(). + * This method is effective when the dictionary sizes are very small relative + * to the input size, and the input size is fairly large to begin with. + * + * Zstd has a simple internal heuristic that selects which strategy to use + * at the beginning of a compression. However, if experimentation shows that + * Zstd is making poor choices, it is possible to override that choice with + * this enum. + */ + ZSTD_dictDefaultAttach = 0, /* Use the default heuristic. */ + ZSTD_dictForceAttach = 1, /* Never copy the dictionary. */ + ZSTD_dictForceCopy = 2, /* Always copy the dictionary. */ + ZSTD_dictForceLoad = 3 /* Always reload the dictionary */ +} ZSTD_dictAttachPref_e; + +typedef enum { + ZSTD_lcm_auto = 0, /**< Automatically determine the compression mode based on the compression level. + * Negative compression levels will be uncompressed, and positive compression + * levels will be compressed. */ + ZSTD_lcm_huffman = 1, /**< Always attempt Huffman compression. Uncompressed literals will still be + * emitted if Huffman compression is not profitable. */ + ZSTD_lcm_uncompressed = 2 /**< Always emit uncompressed literals. */ +} ZSTD_literalCompressionMode_e; + +typedef enum { + /* Note: This enum controls features which are conditionally beneficial. + * Zstd can take a decision on whether or not to enable the feature (ZSTD_ps_auto), + * but setting the switch to ZSTD_ps_enable or ZSTD_ps_disable force enable/disable the feature. + */ + ZSTD_ps_auto = 0, /* Let the library automatically determine whether the feature shall be enabled */ + ZSTD_ps_enable = 1, /* Force-enable the feature */ + ZSTD_ps_disable = 2 /* Do not use the feature */ +} ZSTD_ParamSwitch_e; +#define ZSTD_paramSwitch_e ZSTD_ParamSwitch_e /* old name */ + +/*************************************** +* Frame header and size functions +***************************************/ + +/*! ZSTD_findDecompressedSize() : + * `src` should point to the start of a series of ZSTD encoded and/or skippable frames + * `srcSize` must be the _exact_ size of this series + * (i.e. there should be a frame boundary at `src + srcSize`) + * @return : - decompressed size of all data in all successive frames + * - if the decompressed size cannot be determined: ZSTD_CONTENTSIZE_UNKNOWN + * - if an error occurred: ZSTD_CONTENTSIZE_ERROR + * + * note 1 : decompressed size is an optional field, that may not be present, especially in streaming mode. + * When `return==ZSTD_CONTENTSIZE_UNKNOWN`, data to decompress could be any size. + * In which case, it's necessary to use streaming mode to decompress data. + * note 2 : decompressed size is always present when compression is done with ZSTD_compress() + * note 3 : decompressed size can be very large (64-bits value), + * potentially larger than what local system can handle as a single memory segment. + * In which case, it's necessary to use streaming mode to decompress data. + * note 4 : If source is untrusted, decompressed size could be wrong or intentionally modified. + * Always ensure result fits within application's authorized limits. + * Each application can set its own limits. + * note 5 : ZSTD_findDecompressedSize handles multiple frames, and so it must traverse the input to + * read each contained frame header. This is fast as most of the data is skipped, + * however it does mean that all frame data must be present and valid. */ +ZSTDLIB_STATIC_API unsigned long long ZSTD_findDecompressedSize(const void* src, size_t srcSize); + +/*! ZSTD_decompressBound() : + * `src` should point to the start of a series of ZSTD encoded and/or skippable frames + * `srcSize` must be the _exact_ size of this series + * (i.e. there should be a frame boundary at `src + srcSize`) + * @return : - upper-bound for the decompressed size of all data in all successive frames + * - if an error occurred: ZSTD_CONTENTSIZE_ERROR + * + * note 1 : an error can occur if `src` contains an invalid or incorrectly formatted frame. + * note 2 : the upper-bound is exact when the decompressed size field is available in every ZSTD encoded frame of `src`. + * in this case, `ZSTD_findDecompressedSize` and `ZSTD_decompressBound` return the same value. + * note 3 : when the decompressed size field isn't available, the upper-bound for that frame is calculated by: + * upper-bound = # blocks * min(128 KB, Window_Size) + */ +ZSTDLIB_STATIC_API unsigned long long ZSTD_decompressBound(const void* src, size_t srcSize); + +/*! ZSTD_frameHeaderSize() : + * srcSize must be large enough, aka >= ZSTD_FRAMEHEADERSIZE_PREFIX. + * @return : size of the Frame Header, + * or an error code (if srcSize is too small) */ +ZSTDLIB_STATIC_API size_t ZSTD_frameHeaderSize(const void* src, size_t srcSize); + +typedef enum { ZSTD_frame, ZSTD_skippableFrame } ZSTD_FrameType_e; +#define ZSTD_frameType_e ZSTD_FrameType_e /* old name */ +typedef struct { + unsigned long long frameContentSize; /* if == ZSTD_CONTENTSIZE_UNKNOWN, it means this field is not available. 0 means "empty" */ + unsigned long long windowSize; /* can be very large, up to <= frameContentSize */ + unsigned blockSizeMax; + ZSTD_FrameType_e frameType; /* if == ZSTD_skippableFrame, frameContentSize is the size of skippable content */ + unsigned headerSize; + unsigned dictID; /* for ZSTD_skippableFrame, contains the skippable magic variant [0-15] */ + unsigned checksumFlag; + unsigned _reserved1; + unsigned _reserved2; +} ZSTD_FrameHeader; +#define ZSTD_frameHeader ZSTD_FrameHeader /* old name */ + +/*! ZSTD_getFrameHeader() : + * decode Frame Header into `zfhPtr`, or requires larger `srcSize`. + * @return : 0 => header is complete, `zfhPtr` is correctly filled, + * >0 => `srcSize` is too small, @return value is the wanted `srcSize` amount, `zfhPtr` is not filled, + * or an error code, which can be tested using ZSTD_isError() */ +ZSTDLIB_STATIC_API size_t ZSTD_getFrameHeader(ZSTD_FrameHeader* zfhPtr, const void* src, size_t srcSize); +/*! ZSTD_getFrameHeader_advanced() : + * same as ZSTD_getFrameHeader(), + * with added capability to select a format (like ZSTD_f_zstd1_magicless) */ +ZSTDLIB_STATIC_API size_t ZSTD_getFrameHeader_advanced(ZSTD_FrameHeader* zfhPtr, const void* src, size_t srcSize, ZSTD_format_e format); + +/*! ZSTD_decompressionMargin() : + * Zstd supports in-place decompression, where the input and output buffers overlap. + * In this case, the output buffer must be at least (Margin + Output_Size) bytes large, + * and the input buffer must be at the end of the output buffer. + * + * _______________________ Output Buffer ________________________ + * | | + * | ____ Input Buffer ____| + * | | | + * v v v + * |---------------------------------------|-----------|----------| + * ^ ^ ^ + * |___________________ Output_Size ___________________|_ Margin _| + * + * NOTE: See also ZSTD_DECOMPRESSION_MARGIN(). + * NOTE: This applies only to single-pass decompression through ZSTD_decompress() or + * ZSTD_decompressDCtx(). + * NOTE: This function supports multi-frame input. + * + * @param src The compressed frame(s) + * @param srcSize The size of the compressed frame(s) + * @returns The decompression margin or an error that can be checked with ZSTD_isError(). + */ +ZSTDLIB_STATIC_API size_t ZSTD_decompressionMargin(const void* src, size_t srcSize); + +/*! ZSTD_DECOMPRESS_MARGIN() : + * Similar to ZSTD_decompressionMargin(), but instead of computing the margin from + * the compressed frame, compute it from the original size and the blockSizeLog. + * See ZSTD_decompressionMargin() for details. + * + * WARNING: This macro does not support multi-frame input, the input must be a single + * zstd frame. If you need that support use the function, or implement it yourself. + * + * @param originalSize The original uncompressed size of the data. + * @param blockSize The block size == MIN(windowSize, ZSTD_BLOCKSIZE_MAX). + * Unless you explicitly set the windowLog smaller than + * ZSTD_BLOCKSIZELOG_MAX you can just use ZSTD_BLOCKSIZE_MAX. + */ +#define ZSTD_DECOMPRESSION_MARGIN(originalSize, blockSize) ((size_t)( \ + ZSTD_FRAMEHEADERSIZE_MAX /* Frame header */ + \ + 4 /* checksum */ + \ + ((originalSize) == 0 ? 0 : 3 * (((originalSize) + (blockSize) - 1) / blockSize)) /* 3 bytes per block */ + \ + (blockSize) /* One block of margin */ \ + )) + +typedef enum { + ZSTD_sf_noBlockDelimiters = 0, /* ZSTD_Sequence[] has no block delimiters, just sequences */ + ZSTD_sf_explicitBlockDelimiters = 1 /* ZSTD_Sequence[] contains explicit block delimiters */ +} ZSTD_SequenceFormat_e; +#define ZSTD_sequenceFormat_e ZSTD_SequenceFormat_e /* old name */ + +/*! ZSTD_sequenceBound() : + * `srcSize` : size of the input buffer + * @return : upper-bound for the number of sequences that can be generated + * from a buffer of srcSize bytes + * + * note : returns number of sequences - to get bytes, multiply by sizeof(ZSTD_Sequence). + */ +ZSTDLIB_STATIC_API size_t ZSTD_sequenceBound(size_t srcSize); + +/*! ZSTD_generateSequences() : + * WARNING: This function is meant for debugging and informational purposes ONLY! + * Its implementation is flawed, and it will be deleted in a future version. + * It is not guaranteed to succeed, as there are several cases where it will give + * up and fail. You should NOT use this function in production code. + * + * This function is deprecated, and will be removed in a future version. + * + * Generate sequences using ZSTD_compress2(), given a source buffer. + * + * @param zc The compression context to be used for ZSTD_compress2(). Set any + * compression parameters you need on this context. + * @param outSeqs The output sequences buffer of size @p outSeqsSize + * @param outSeqsCapacity The size of the output sequences buffer. + * ZSTD_sequenceBound(srcSize) is an upper bound on the number + * of sequences that can be generated. + * @param src The source buffer to generate sequences from of size @p srcSize. + * @param srcSize The size of the source buffer. + * + * Each block will end with a dummy sequence + * with offset == 0, matchLength == 0, and litLength == length of last literals. + * litLength may be == 0, and if so, then the sequence of (of: 0 ml: 0 ll: 0) + * simply acts as a block delimiter. + * + * @returns The number of sequences generated, necessarily less than + * ZSTD_sequenceBound(srcSize), or an error code that can be checked + * with ZSTD_isError(). + */ +ZSTD_DEPRECATED("For debugging only, will be replaced by ZSTD_extractSequences()") +ZSTDLIB_STATIC_API size_t +ZSTD_generateSequences(ZSTD_CCtx* zc, + ZSTD_Sequence* outSeqs, size_t outSeqsCapacity, + const void* src, size_t srcSize); + +/*! ZSTD_mergeBlockDelimiters() : + * Given an array of ZSTD_Sequence, remove all sequences that represent block delimiters/last literals + * by merging them into the literals of the next sequence. + * + * As such, the final generated result has no explicit representation of block boundaries, + * and the final last literals segment is not represented in the sequences. + * + * The output of this function can be fed into ZSTD_compressSequences() with CCtx + * setting of ZSTD_c_blockDelimiters as ZSTD_sf_noBlockDelimiters + * @return : number of sequences left after merging + */ +ZSTDLIB_STATIC_API size_t ZSTD_mergeBlockDelimiters(ZSTD_Sequence* sequences, size_t seqsSize); + +/*! ZSTD_compressSequences() : + * Compress an array of ZSTD_Sequence, associated with @src buffer, into dst. + * @src contains the entire input (not just the literals). + * If @srcSize > sum(sequence.length), the remaining bytes are considered all literals + * If a dictionary is included, then the cctx should reference the dict (see: ZSTD_CCtx_refCDict(), ZSTD_CCtx_loadDictionary(), etc.). + * The entire source is compressed into a single frame. + * + * The compression behavior changes based on cctx params. In particular: + * If ZSTD_c_blockDelimiters == ZSTD_sf_noBlockDelimiters, the array of ZSTD_Sequence is expected to contain + * no block delimiters (defined in ZSTD_Sequence). Block boundaries are roughly determined based on + * the block size derived from the cctx, and sequences may be split. This is the default setting. + * + * If ZSTD_c_blockDelimiters == ZSTD_sf_explicitBlockDelimiters, the array of ZSTD_Sequence is expected to contain + * valid block delimiters (defined in ZSTD_Sequence). Behavior is undefined if no block delimiters are provided. + * + * When ZSTD_c_blockDelimiters == ZSTD_sf_explicitBlockDelimiters, it's possible to decide generating repcodes + * using the advanced parameter ZSTD_c_repcodeResolution. Repcodes will improve compression ratio, though the benefit + * can vary greatly depending on Sequences. On the other hand, repcode resolution is an expensive operation. + * By default, it's disabled at low (<10) compression levels, and enabled above the threshold (>=10). + * ZSTD_c_repcodeResolution makes it possible to directly manage this processing in either direction. + * + * If ZSTD_c_validateSequences == 0, this function blindly accepts the Sequences provided. Invalid Sequences cause undefined + * behavior. If ZSTD_c_validateSequences == 1, then the function will detect invalid Sequences (see doc/zstd_compression_format.md for + * specifics regarding offset/matchlength requirements) and then bail out and return an error. + * + * In addition to the two adjustable experimental params, there are other important cctx params. + * - ZSTD_c_minMatch MUST be set as less than or equal to the smallest match generated by the match finder. It has a minimum value of ZSTD_MINMATCH_MIN. + * - ZSTD_c_compressionLevel accordingly adjusts the strength of the entropy coder, as it would in typical compression. + * - ZSTD_c_windowLog affects offset validation: this function will return an error at higher debug levels if a provided offset + * is larger than what the spec allows for a given window log and dictionary (if present). See: doc/zstd_compression_format.md + * + * Note: Repcodes are, as of now, always re-calculated within this function, ZSTD_Sequence.rep is effectively unused. + * Dev Note: Once ability to ingest repcodes become available, the explicit block delims mode must respect those repcodes exactly, + * and cannot emit an RLE block that disagrees with the repcode history. + * @return : final compressed size, or a ZSTD error code. + */ +ZSTDLIB_STATIC_API size_t +ZSTD_compressSequences(ZSTD_CCtx* cctx, + void* dst, size_t dstCapacity, + const ZSTD_Sequence* inSeqs, size_t inSeqsSize, + const void* src, size_t srcSize); + + +/*! ZSTD_compressSequencesAndLiterals() : + * This is a variant of ZSTD_compressSequences() which, + * instead of receiving (src,srcSize) as input parameter, receives (literals,litSize), + * aka all the literals, already extracted and laid out into a single continuous buffer. + * This can be useful if the process generating the sequences also happens to generate the buffer of literals, + * thus skipping an extraction + caching stage. + * It's a speed optimization, useful when the right conditions are met, + * but it also features the following limitations: + * - Only supports explicit delimiter mode + * - Currently does not support Sequences validation (so input Sequences are trusted) + * - Not compatible with frame checksum, which must be disabled + * - If any block is incompressible, will fail and return an error + * - @litSize must be == sum of all @.litLength fields in @inSeqs. Any discrepancy will generate an error. + * - @litBufCapacity is the size of the underlying buffer into which literals are written, starting at address @literals. + * @litBufCapacity must be at least 8 bytes larger than @litSize. + * - @decompressedSize must be correct, and correspond to the sum of all Sequences. Any discrepancy will generate an error. + * @return : final compressed size, or a ZSTD error code. + */ +ZSTDLIB_STATIC_API size_t +ZSTD_compressSequencesAndLiterals(ZSTD_CCtx* cctx, + void* dst, size_t dstCapacity, + const ZSTD_Sequence* inSeqs, size_t nbSequences, + const void* literals, size_t litSize, size_t litBufCapacity, + size_t decompressedSize); + + +/*! ZSTD_writeSkippableFrame() : + * Generates a zstd skippable frame containing data given by src, and writes it to dst buffer. + * + * Skippable frames begin with a 4-byte magic number. There are 16 possible choices of magic number, + * ranging from ZSTD_MAGIC_SKIPPABLE_START to ZSTD_MAGIC_SKIPPABLE_START+15. + * As such, the parameter magicVariant controls the exact skippable frame magic number variant used, + * so the magic number used will be ZSTD_MAGIC_SKIPPABLE_START + magicVariant. + * + * Returns an error if destination buffer is not large enough, if the source size is not representable + * with a 4-byte unsigned int, or if the parameter magicVariant is greater than 15 (and therefore invalid). + * + * @return : number of bytes written or a ZSTD error. + */ +ZSTDLIB_STATIC_API size_t ZSTD_writeSkippableFrame(void* dst, size_t dstCapacity, + const void* src, size_t srcSize, + unsigned magicVariant); + +/*! ZSTD_readSkippableFrame() : + * Retrieves the content of a zstd skippable frame starting at @src, and writes it to @dst buffer. + * + * The parameter @magicVariant will receive the magicVariant that was supplied when the frame was written, + * i.e. magicNumber - ZSTD_MAGIC_SKIPPABLE_START. + * This can be NULL if the caller is not interested in the magicVariant. + * + * Returns an error if destination buffer is not large enough, or if the frame is not skippable. + * + * @return : number of bytes written or a ZSTD error. + */ +ZSTDLIB_STATIC_API size_t ZSTD_readSkippableFrame(void* dst, size_t dstCapacity, + unsigned* magicVariant, + const void* src, size_t srcSize); + +/*! ZSTD_isSkippableFrame() : + * Tells if the content of `buffer` starts with a valid Frame Identifier for a skippable frame. + */ +ZSTDLIB_STATIC_API unsigned ZSTD_isSkippableFrame(const void* buffer, size_t size); + + + +/*************************************** +* Memory management +***************************************/ + +/*! ZSTD_estimate*() : + * These functions make it possible to estimate memory usage + * of a future {D,C}Ctx, before its creation. + * This is useful in combination with ZSTD_initStatic(), + * which makes it possible to employ a static buffer for ZSTD_CCtx* state. + * + * ZSTD_estimateCCtxSize() will provide a memory budget large enough + * to compress data of any size using one-shot compression ZSTD_compressCCtx() or ZSTD_compress2() + * associated with any compression level up to max specified one. + * The estimate will assume the input may be arbitrarily large, + * which is the worst case. + * + * Note that the size estimation is specific for one-shot compression, + * it is not valid for streaming (see ZSTD_estimateCStreamSize*()) + * nor other potential ways of using a ZSTD_CCtx* state. + * + * When srcSize can be bound by a known and rather "small" value, + * this knowledge can be used to provide a tighter budget estimation + * because the ZSTD_CCtx* state will need less memory for small inputs. + * This tighter estimation can be provided by employing more advanced functions + * ZSTD_estimateCCtxSize_usingCParams(), which can be used in tandem with ZSTD_getCParams(), + * and ZSTD_estimateCCtxSize_usingCCtxParams(), which can be used in tandem with ZSTD_CCtxParams_setParameter(). + * Both can be used to estimate memory using custom compression parameters and arbitrary srcSize limits. + * + * Note : only single-threaded compression is supported. + * ZSTD_estimateCCtxSize_usingCCtxParams() will return an error code if ZSTD_c_nbWorkers is >= 1. + */ +ZSTDLIB_STATIC_API size_t ZSTD_estimateCCtxSize(int maxCompressionLevel); +ZSTDLIB_STATIC_API size_t ZSTD_estimateCCtxSize_usingCParams(ZSTD_compressionParameters cParams); +ZSTDLIB_STATIC_API size_t ZSTD_estimateCCtxSize_usingCCtxParams(const ZSTD_CCtx_params* params); +ZSTDLIB_STATIC_API size_t ZSTD_estimateDCtxSize(void); + +/*! ZSTD_estimateCStreamSize() : + * ZSTD_estimateCStreamSize() will provide a memory budget large enough for streaming compression + * using any compression level up to the max specified one. + * It will also consider src size to be arbitrarily "large", which is a worst case scenario. + * If srcSize is known to always be small, ZSTD_estimateCStreamSize_usingCParams() can provide a tighter estimation. + * ZSTD_estimateCStreamSize_usingCParams() can be used in tandem with ZSTD_getCParams() to create cParams from compressionLevel. + * ZSTD_estimateCStreamSize_usingCCtxParams() can be used in tandem with ZSTD_CCtxParams_setParameter(). Only single-threaded compression is supported. This function will return an error code if ZSTD_c_nbWorkers is >= 1. + * Note : CStream size estimation is only correct for single-threaded compression. + * ZSTD_estimateCStreamSize_usingCCtxParams() will return an error code if ZSTD_c_nbWorkers is >= 1. + * Note 2 : ZSTD_estimateCStreamSize* functions are not compatible with the Block-Level Sequence Producer API at this time. + * Size estimates assume that no external sequence producer is registered. + * + * ZSTD_DStream memory budget depends on frame's window Size. + * This information can be passed manually, using ZSTD_estimateDStreamSize, + * or deducted from a valid frame Header, using ZSTD_estimateDStreamSize_fromFrame(); + * Any frame requesting a window size larger than max specified one will be rejected. + * Note : if streaming is init with function ZSTD_init?Stream_usingDict(), + * an internal ?Dict will be created, which additional size is not estimated here. + * In this case, get total size by adding ZSTD_estimate?DictSize + */ +ZSTDLIB_STATIC_API size_t ZSTD_estimateCStreamSize(int maxCompressionLevel); +ZSTDLIB_STATIC_API size_t ZSTD_estimateCStreamSize_usingCParams(ZSTD_compressionParameters cParams); +ZSTDLIB_STATIC_API size_t ZSTD_estimateCStreamSize_usingCCtxParams(const ZSTD_CCtx_params* params); +ZSTDLIB_STATIC_API size_t ZSTD_estimateDStreamSize(size_t maxWindowSize); +ZSTDLIB_STATIC_API size_t ZSTD_estimateDStreamSize_fromFrame(const void* src, size_t srcSize); + +/*! ZSTD_estimate?DictSize() : + * ZSTD_estimateCDictSize() will bet that src size is relatively "small", and content is copied, like ZSTD_createCDict(). + * ZSTD_estimateCDictSize_advanced() makes it possible to control compression parameters precisely, like ZSTD_createCDict_advanced(). + * Note : dictionaries created by reference (`ZSTD_dlm_byRef`) are logically smaller. + */ +ZSTDLIB_STATIC_API size_t ZSTD_estimateCDictSize(size_t dictSize, int compressionLevel); +ZSTDLIB_STATIC_API size_t ZSTD_estimateCDictSize_advanced(size_t dictSize, ZSTD_compressionParameters cParams, ZSTD_dictLoadMethod_e dictLoadMethod); +ZSTDLIB_STATIC_API size_t ZSTD_estimateDDictSize(size_t dictSize, ZSTD_dictLoadMethod_e dictLoadMethod); + +/*! ZSTD_initStatic*() : + * Initialize an object using a pre-allocated fixed-size buffer. + * workspace: The memory area to emplace the object into. + * Provided pointer *must be 8-bytes aligned*. + * Buffer must outlive object. + * workspaceSize: Use ZSTD_estimate*Size() to determine + * how large workspace must be to support target scenario. + * @return : pointer to object (same address as workspace, just different type), + * or NULL if error (size too small, incorrect alignment, etc.) + * Note : zstd will never resize nor malloc() when using a static buffer. + * If the object requires more memory than available, + * zstd will just error out (typically ZSTD_error_memory_allocation). + * Note 2 : there is no corresponding "free" function. + * Since workspace is allocated externally, it must be freed externally too. + * Note 3 : cParams : use ZSTD_getCParams() to convert a compression level + * into its associated cParams. + * Limitation 1 : currently not compatible with internal dictionary creation, triggered by + * ZSTD_CCtx_loadDictionary(), ZSTD_initCStream_usingDict() or ZSTD_initDStream_usingDict(). + * Limitation 2 : static cctx currently not compatible with multi-threading. + * Limitation 3 : static dctx is incompatible with legacy support. + */ +ZSTDLIB_STATIC_API ZSTD_CCtx* ZSTD_initStaticCCtx(void* workspace, size_t workspaceSize); +ZSTDLIB_STATIC_API ZSTD_CStream* ZSTD_initStaticCStream(void* workspace, size_t workspaceSize); /**< same as ZSTD_initStaticCCtx() */ + +ZSTDLIB_STATIC_API ZSTD_DCtx* ZSTD_initStaticDCtx(void* workspace, size_t workspaceSize); +ZSTDLIB_STATIC_API ZSTD_DStream* ZSTD_initStaticDStream(void* workspace, size_t workspaceSize); /**< same as ZSTD_initStaticDCtx() */ + +ZSTDLIB_STATIC_API const ZSTD_CDict* ZSTD_initStaticCDict( + void* workspace, size_t workspaceSize, + const void* dict, size_t dictSize, + ZSTD_dictLoadMethod_e dictLoadMethod, + ZSTD_dictContentType_e dictContentType, + ZSTD_compressionParameters cParams); + +ZSTDLIB_STATIC_API const ZSTD_DDict* ZSTD_initStaticDDict( + void* workspace, size_t workspaceSize, + const void* dict, size_t dictSize, + ZSTD_dictLoadMethod_e dictLoadMethod, + ZSTD_dictContentType_e dictContentType); + + +/*! Custom memory allocation : + * These prototypes make it possible to pass your own allocation/free functions. + * ZSTD_customMem is provided at creation time, using ZSTD_create*_advanced() variants listed below. + * All allocation/free operations will be completed using these custom variants instead of regular ones. + */ +typedef void* (*ZSTD_allocFunction) (void* opaque, size_t size); +typedef void (*ZSTD_freeFunction) (void* opaque, void* address); +typedef struct { ZSTD_allocFunction customAlloc; ZSTD_freeFunction customFree; void* opaque; } ZSTD_customMem; +#if defined(__clang__) && __clang_major__ >= 5 +#pragma clang diagnostic push +#pragma clang diagnostic ignored "-Wzero-as-null-pointer-constant" +#endif +static +#ifdef __GNUC__ +__attribute__((__unused__)) +#endif +ZSTD_customMem const ZSTD_defaultCMem = { NULL, NULL, NULL }; /**< this constant defers to stdlib's functions */ +#if defined(__clang__) && __clang_major__ >= 5 +#pragma clang diagnostic pop +#endif + +ZSTDLIB_STATIC_API ZSTD_CCtx* ZSTD_createCCtx_advanced(ZSTD_customMem customMem); +ZSTDLIB_STATIC_API ZSTD_CStream* ZSTD_createCStream_advanced(ZSTD_customMem customMem); +ZSTDLIB_STATIC_API ZSTD_DCtx* ZSTD_createDCtx_advanced(ZSTD_customMem customMem); +ZSTDLIB_STATIC_API ZSTD_DStream* ZSTD_createDStream_advanced(ZSTD_customMem customMem); + +ZSTDLIB_STATIC_API ZSTD_CDict* ZSTD_createCDict_advanced(const void* dict, size_t dictSize, + ZSTD_dictLoadMethod_e dictLoadMethod, + ZSTD_dictContentType_e dictContentType, + ZSTD_compressionParameters cParams, + ZSTD_customMem customMem); + +/*! Thread pool : + * These prototypes make it possible to share a thread pool among multiple compression contexts. + * This can limit resources for applications with multiple threads where each one uses + * a threaded compression mode (via ZSTD_c_nbWorkers parameter). + * ZSTD_createThreadPool creates a new thread pool with a given number of threads. + * Note that the lifetime of such pool must exist while being used. + * ZSTD_CCtx_refThreadPool assigns a thread pool to a context (use NULL argument value + * to use an internal thread pool). + * ZSTD_freeThreadPool frees a thread pool, accepts NULL pointer. + */ +typedef struct POOL_ctx_s ZSTD_threadPool; +ZSTDLIB_STATIC_API ZSTD_threadPool* ZSTD_createThreadPool(size_t numThreads); +ZSTDLIB_STATIC_API void ZSTD_freeThreadPool (ZSTD_threadPool* pool); /* accept NULL pointer */ +ZSTDLIB_STATIC_API size_t ZSTD_CCtx_refThreadPool(ZSTD_CCtx* cctx, ZSTD_threadPool* pool); + + +/* + * This API is temporary and is expected to change or disappear in the future! + */ +ZSTDLIB_STATIC_API ZSTD_CDict* ZSTD_createCDict_advanced2( + const void* dict, size_t dictSize, + ZSTD_dictLoadMethod_e dictLoadMethod, + ZSTD_dictContentType_e dictContentType, + const ZSTD_CCtx_params* cctxParams, + ZSTD_customMem customMem); + +ZSTDLIB_STATIC_API ZSTD_DDict* ZSTD_createDDict_advanced( + const void* dict, size_t dictSize, + ZSTD_dictLoadMethod_e dictLoadMethod, + ZSTD_dictContentType_e dictContentType, + ZSTD_customMem customMem); + + +/*************************************** +* Advanced compression functions +***************************************/ + +/*! ZSTD_createCDict_byReference() : + * Create a digested dictionary for compression + * Dictionary content is just referenced, not duplicated. + * As a consequence, `dictBuffer` **must** outlive CDict, + * and its content must remain unmodified throughout the lifetime of CDict. + * note: equivalent to ZSTD_createCDict_advanced(), with dictLoadMethod==ZSTD_dlm_byRef */ +ZSTDLIB_STATIC_API ZSTD_CDict* ZSTD_createCDict_byReference(const void* dictBuffer, size_t dictSize, int compressionLevel); + +/*! ZSTD_getCParams() : + * @return ZSTD_compressionParameters structure for a selected compression level and estimated srcSize. + * `estimatedSrcSize` value is optional, select 0 if not known */ +ZSTDLIB_STATIC_API ZSTD_compressionParameters ZSTD_getCParams(int compressionLevel, unsigned long long estimatedSrcSize, size_t dictSize); + +/*! ZSTD_getParams() : + * same as ZSTD_getCParams(), but @return a full `ZSTD_parameters` object instead of sub-component `ZSTD_compressionParameters`. + * All fields of `ZSTD_frameParameters` are set to default : contentSize=1, checksum=0, noDictID=0 */ +ZSTDLIB_STATIC_API ZSTD_parameters ZSTD_getParams(int compressionLevel, unsigned long long estimatedSrcSize, size_t dictSize); + +/*! ZSTD_checkCParams() : + * Ensure param values remain within authorized range. + * @return 0 on success, or an error code (can be checked with ZSTD_isError()) */ +ZSTDLIB_STATIC_API size_t ZSTD_checkCParams(ZSTD_compressionParameters params); + +/*! ZSTD_adjustCParams() : + * optimize params for a given `srcSize` and `dictSize`. + * `srcSize` can be unknown, in which case use ZSTD_CONTENTSIZE_UNKNOWN. + * `dictSize` must be `0` when there is no dictionary. + * cPar can be invalid : all parameters will be clamped within valid range in the @return struct. + * This function never fails (wide contract) */ +ZSTDLIB_STATIC_API ZSTD_compressionParameters ZSTD_adjustCParams(ZSTD_compressionParameters cPar, unsigned long long srcSize, size_t dictSize); + +/*! ZSTD_CCtx_setCParams() : + * Set all parameters provided within @p cparams into the working @p cctx. + * Note : if modifying parameters during compression (MT mode only), + * note that changes to the .windowLog parameter will be ignored. + * @return 0 on success, or an error code (can be checked with ZSTD_isError()). + * On failure, no parameters are updated. + */ +ZSTDLIB_STATIC_API size_t ZSTD_CCtx_setCParams(ZSTD_CCtx* cctx, ZSTD_compressionParameters cparams); + +/*! ZSTD_CCtx_setFParams() : + * Set all parameters provided within @p fparams into the working @p cctx. + * @return 0 on success, or an error code (can be checked with ZSTD_isError()). + */ +ZSTDLIB_STATIC_API size_t ZSTD_CCtx_setFParams(ZSTD_CCtx* cctx, ZSTD_frameParameters fparams); + +/*! ZSTD_CCtx_setParams() : + * Set all parameters provided within @p params into the working @p cctx. + * @return 0 on success, or an error code (can be checked with ZSTD_isError()). + */ +ZSTDLIB_STATIC_API size_t ZSTD_CCtx_setParams(ZSTD_CCtx* cctx, ZSTD_parameters params); + +/*! ZSTD_compress_advanced() : + * Note : this function is now DEPRECATED. + * It can be replaced by ZSTD_compress2(), in combination with ZSTD_CCtx_setParameter() and other parameter setters. + * This prototype will generate compilation warnings. */ +ZSTD_DEPRECATED("use ZSTD_compress2") +ZSTDLIB_STATIC_API +size_t ZSTD_compress_advanced(ZSTD_CCtx* cctx, + void* dst, size_t dstCapacity, + const void* src, size_t srcSize, + const void* dict,size_t dictSize, + ZSTD_parameters params); + +/*! ZSTD_compress_usingCDict_advanced() : + * Note : this function is now DEPRECATED. + * It can be replaced by ZSTD_compress2(), in combination with ZSTD_CCtx_loadDictionary() and other parameter setters. + * This prototype will generate compilation warnings. */ +ZSTD_DEPRECATED("use ZSTD_compress2 with ZSTD_CCtx_loadDictionary") +ZSTDLIB_STATIC_API +size_t ZSTD_compress_usingCDict_advanced(ZSTD_CCtx* cctx, + void* dst, size_t dstCapacity, + const void* src, size_t srcSize, + const ZSTD_CDict* cdict, + ZSTD_frameParameters fParams); + + +/*! ZSTD_CCtx_loadDictionary_byReference() : + * Same as ZSTD_CCtx_loadDictionary(), but dictionary content is referenced, instead of being copied into CCtx. + * It saves some memory, but also requires that `dict` outlives its usage within `cctx` */ +ZSTDLIB_STATIC_API size_t ZSTD_CCtx_loadDictionary_byReference(ZSTD_CCtx* cctx, const void* dict, size_t dictSize); + +/*! ZSTD_CCtx_loadDictionary_advanced() : + * Same as ZSTD_CCtx_loadDictionary(), but gives finer control over + * how to load the dictionary (by copy ? by reference ?) + * and how to interpret it (automatic ? force raw mode ? full mode only ?) */ +ZSTDLIB_STATIC_API size_t ZSTD_CCtx_loadDictionary_advanced(ZSTD_CCtx* cctx, const void* dict, size_t dictSize, ZSTD_dictLoadMethod_e dictLoadMethod, ZSTD_dictContentType_e dictContentType); + +/*! ZSTD_CCtx_refPrefix_advanced() : + * Same as ZSTD_CCtx_refPrefix(), but gives finer control over + * how to interpret prefix content (automatic ? force raw mode (default) ? full mode only ?) */ +ZSTDLIB_STATIC_API size_t ZSTD_CCtx_refPrefix_advanced(ZSTD_CCtx* cctx, const void* prefix, size_t prefixSize, ZSTD_dictContentType_e dictContentType); + +/* === experimental parameters === */ +/* these parameters can be used with ZSTD_setParameter() + * they are not guaranteed to remain supported in the future */ + + /* Enables rsyncable mode, + * which makes compressed files more rsync friendly + * by adding periodic synchronization points to the compressed data. + * The target average block size is ZSTD_c_jobSize / 2. + * It's possible to modify the job size to increase or decrease + * the granularity of the synchronization point. + * Once the jobSize is smaller than the window size, + * it will result in compression ratio degradation. + * NOTE 1: rsyncable mode only works when multithreading is enabled. + * NOTE 2: rsyncable performs poorly in combination with long range mode, + * since it will decrease the effectiveness of synchronization points, + * though mileage may vary. + * NOTE 3: Rsyncable mode limits maximum compression speed to ~400 MB/s. + * If the selected compression level is already running significantly slower, + * the overall speed won't be significantly impacted. + */ + #define ZSTD_c_rsyncable ZSTD_c_experimentalParam1 + +/* Select a compression format. + * The value must be of type ZSTD_format_e. + * See ZSTD_format_e enum definition for details */ +#define ZSTD_c_format ZSTD_c_experimentalParam2 + +/* Force back-reference distances to remain < windowSize, + * even when referencing into Dictionary content (default:0) */ +#define ZSTD_c_forceMaxWindow ZSTD_c_experimentalParam3 + +/* Controls whether the contents of a CDict + * are used in place, or copied into the working context. + * Accepts values from the ZSTD_dictAttachPref_e enum. + * See the comments on that enum for an explanation of the feature. */ +#define ZSTD_c_forceAttachDict ZSTD_c_experimentalParam4 + +/* Controlled with ZSTD_ParamSwitch_e enum. + * Default is ZSTD_ps_auto. + * Set to ZSTD_ps_disable to never compress literals. + * Set to ZSTD_ps_enable to always compress literals. (Note: uncompressed literals + * may still be emitted if huffman is not beneficial to use.) + * + * By default, in ZSTD_ps_auto, the library will decide at runtime whether to use + * literals compression based on the compression parameters - specifically, + * negative compression levels do not use literal compression. + */ +#define ZSTD_c_literalCompressionMode ZSTD_c_experimentalParam5 + +/* User's best guess of source size. + * Hint is not valid when srcSizeHint == 0. + * There is no guarantee that hint is close to actual source size, + * but compression ratio may regress significantly if guess considerably underestimates */ +#define ZSTD_c_srcSizeHint ZSTD_c_experimentalParam7 + +/* Controls whether the new and experimental "dedicated dictionary search + * structure" can be used. This feature is still rough around the edges, be + * prepared for surprising behavior! + * + * How to use it: + * + * When using a CDict, whether to use this feature or not is controlled at + * CDict creation, and it must be set in a CCtxParams set passed into that + * construction (via ZSTD_createCDict_advanced2()). A compression will then + * use the feature or not based on how the CDict was constructed; the value of + * this param, set in the CCtx, will have no effect. + * + * However, when a dictionary buffer is passed into a CCtx, such as via + * ZSTD_CCtx_loadDictionary(), this param can be set on the CCtx to control + * whether the CDict that is created internally can use the feature or not. + * + * What it does: + * + * Normally, the internal data structures of the CDict are analogous to what + * would be stored in a CCtx after compressing the contents of a dictionary. + * To an approximation, a compression using a dictionary can then use those + * data structures to simply continue what is effectively a streaming + * compression where the simulated compression of the dictionary left off. + * Which is to say, the search structures in the CDict are normally the same + * format as in the CCtx. + * + * It is possible to do better, since the CDict is not like a CCtx: the search + * structures are written once during CDict creation, and then are only read + * after that, while the search structures in the CCtx are both read and + * written as the compression goes along. This means we can choose a search + * structure for the dictionary that is read-optimized. + * + * This feature enables the use of that different structure. + * + * Note that some of the members of the ZSTD_compressionParameters struct have + * different semantics and constraints in the dedicated search structure. It is + * highly recommended that you simply set a compression level in the CCtxParams + * you pass into the CDict creation call, and avoid messing with the cParams + * directly. + * + * Effects: + * + * This will only have any effect when the selected ZSTD_strategy + * implementation supports this feature. Currently, that's limited to + * ZSTD_greedy, ZSTD_lazy, and ZSTD_lazy2. + * + * Note that this means that the CDict tables can no longer be copied into the + * CCtx, so the dict attachment mode ZSTD_dictForceCopy will no longer be + * usable. The dictionary can only be attached or reloaded. + * + * In general, you should expect compression to be faster--sometimes very much + * so--and CDict creation to be slightly slower. Eventually, we will probably + * make this mode the default. + */ +#define ZSTD_c_enableDedicatedDictSearch ZSTD_c_experimentalParam8 + +/* ZSTD_c_stableInBuffer + * Experimental parameter. + * Default is 0 == disabled. Set to 1 to enable. + * + * Tells the compressor that input data presented with ZSTD_inBuffer + * will ALWAYS be the same between calls. + * Technically, the @src pointer must never be changed, + * and the @pos field can only be updated by zstd. + * However, it's possible to increase the @size field, + * allowing scenarios where more data can be appended after compressions starts. + * These conditions are checked by the compressor, + * and compression will fail if they are not respected. + * Also, data in the ZSTD_inBuffer within the range [src, src + pos) + * MUST not be modified during compression or it will result in data corruption. + * + * When this flag is enabled zstd won't allocate an input window buffer, + * because the user guarantees it can reference the ZSTD_inBuffer until + * the frame is complete. But, it will still allocate an output buffer + * large enough to fit a block (see ZSTD_c_stableOutBuffer). This will also + * avoid the memcpy() from the input buffer to the input window buffer. + * + * NOTE: So long as the ZSTD_inBuffer always points to valid memory, using + * this flag is ALWAYS memory safe, and will never access out-of-bounds + * memory. However, compression WILL fail if conditions are not respected. + * + * WARNING: The data in the ZSTD_inBuffer in the range [src, src + pos) MUST + * not be modified during compression or it will result in data corruption. + * This is because zstd needs to reference data in the ZSTD_inBuffer to find + * matches. Normally zstd maintains its own window buffer for this purpose, + * but passing this flag tells zstd to rely on user provided buffer instead. + */ +#define ZSTD_c_stableInBuffer ZSTD_c_experimentalParam9 + +/* ZSTD_c_stableOutBuffer + * Experimental parameter. + * Default is 0 == disabled. Set to 1 to enable. + * + * Tells he compressor that the ZSTD_outBuffer will not be resized between + * calls. Specifically: (out.size - out.pos) will never grow. This gives the + * compressor the freedom to say: If the compressed data doesn't fit in the + * output buffer then return ZSTD_error_dstSizeTooSmall. This allows us to + * always decompress directly into the output buffer, instead of decompressing + * into an internal buffer and copying to the output buffer. + * + * When this flag is enabled zstd won't allocate an output buffer, because + * it can write directly to the ZSTD_outBuffer. It will still allocate the + * input window buffer (see ZSTD_c_stableInBuffer). + * + * Zstd will check that (out.size - out.pos) never grows and return an error + * if it does. While not strictly necessary, this should prevent surprises. + */ +#define ZSTD_c_stableOutBuffer ZSTD_c_experimentalParam10 + +/* ZSTD_c_blockDelimiters + * Default is 0 == ZSTD_sf_noBlockDelimiters. + * + * For use with sequence compression API: ZSTD_compressSequences(). + * + * Designates whether or not the given array of ZSTD_Sequence contains block delimiters + * and last literals, which are defined as sequences with offset == 0 and matchLength == 0. + * See the definition of ZSTD_Sequence for more specifics. + */ +#define ZSTD_c_blockDelimiters ZSTD_c_experimentalParam11 + +/* ZSTD_c_validateSequences + * Default is 0 == disabled. Set to 1 to enable sequence validation. + * + * For use with sequence compression API: ZSTD_compressSequences*(). + * Designates whether or not provided sequences are validated within ZSTD_compressSequences*() + * during function execution. + * + * When Sequence validation is disabled (default), Sequences are compressed as-is, + * so they must correct, otherwise it would result in a corruption error. + * + * Sequence validation adds some protection, by ensuring that all values respect boundary conditions. + * If a Sequence is detected invalid (see doc/zstd_compression_format.md for + * specifics regarding offset/matchlength requirements) then the function will bail out and + * return an error. + */ +#define ZSTD_c_validateSequences ZSTD_c_experimentalParam12 + +/* ZSTD_c_blockSplitterLevel + * note: this parameter only influences the first splitter stage, + * which is active before producing the sequences. + * ZSTD_c_splitAfterSequences controls the next splitter stage, + * which is active after sequence production. + * Note that both can be combined. + * Allowed values are between 0 and ZSTD_BLOCKSPLITTER_LEVEL_MAX included. + * 0 means "auto", which will select a value depending on current ZSTD_c_strategy. + * 1 means no splitting. + * Then, values from 2 to 6 are sorted in increasing cpu load order. + * + * Note that currently the first block is never split, + * to ensure expansion guarantees in presence of incompressible data. + */ +#define ZSTD_BLOCKSPLITTER_LEVEL_MAX 6 +#define ZSTD_c_blockSplitterLevel ZSTD_c_experimentalParam20 + +/* ZSTD_c_splitAfterSequences + * This is a stronger splitter algorithm, + * based on actual sequences previously produced by the selected parser. + * It's also slower, and as a consequence, mostly used for high compression levels. + * While the post-splitter does overlap with the pre-splitter, + * both can nonetheless be combined, + * notably with ZSTD_c_blockSplitterLevel at ZSTD_BLOCKSPLITTER_LEVEL_MAX, + * resulting in higher compression ratio than just one of them. + * + * Default is ZSTD_ps_auto. + * Set to ZSTD_ps_disable to never use block splitter. + * Set to ZSTD_ps_enable to always use block splitter. + * + * By default, in ZSTD_ps_auto, the library will decide at runtime whether to use + * block splitting based on the compression parameters. + */ +#define ZSTD_c_splitAfterSequences ZSTD_c_experimentalParam13 + +/* ZSTD_c_useRowMatchFinder + * Controlled with ZSTD_ParamSwitch_e enum. + * Default is ZSTD_ps_auto. + * Set to ZSTD_ps_disable to never use row-based matchfinder. + * Set to ZSTD_ps_enable to force usage of row-based matchfinder. + * + * By default, in ZSTD_ps_auto, the library will decide at runtime whether to use + * the row-based matchfinder based on support for SIMD instructions and the window log. + * Note that this only pertains to compression strategies: greedy, lazy, and lazy2 + */ +#define ZSTD_c_useRowMatchFinder ZSTD_c_experimentalParam14 + +/* ZSTD_c_deterministicRefPrefix + * Default is 0 == disabled. Set to 1 to enable. + * + * Zstd produces different results for prefix compression when the prefix is + * directly adjacent to the data about to be compressed vs. when it isn't. + * This is because zstd detects that the two buffers are contiguous and it can + * use a more efficient match finding algorithm. However, this produces different + * results than when the two buffers are non-contiguous. This flag forces zstd + * to always load the prefix in non-contiguous mode, even if it happens to be + * adjacent to the data, to guarantee determinism. + * + * If you really care about determinism when using a dictionary or prefix, + * like when doing delta compression, you should select this option. It comes + * at a speed penalty of about ~2.5% if the dictionary and data happened to be + * contiguous, and is free if they weren't contiguous. We don't expect that + * intentionally making the dictionary and data contiguous will be worth the + * cost to memcpy() the data. + */ +#define ZSTD_c_deterministicRefPrefix ZSTD_c_experimentalParam15 + +/* ZSTD_c_prefetchCDictTables + * Controlled with ZSTD_ParamSwitch_e enum. Default is ZSTD_ps_auto. + * + * In some situations, zstd uses CDict tables in-place rather than copying them + * into the working context. (See docs on ZSTD_dictAttachPref_e above for details). + * In such situations, compression speed is seriously impacted when CDict tables are + * "cold" (outside CPU cache). This parameter instructs zstd to prefetch CDict tables + * when they are used in-place. + * + * For sufficiently small inputs, the cost of the prefetch will outweigh the benefit. + * For sufficiently large inputs, zstd will by default memcpy() CDict tables + * into the working context, so there is no need to prefetch. This parameter is + * targeted at a middle range of input sizes, where a prefetch is cheap enough to be + * useful but memcpy() is too expensive. The exact range of input sizes where this + * makes sense is best determined by careful experimentation. + * + * Note: for this parameter, ZSTD_ps_auto is currently equivalent to ZSTD_ps_disable, + * but in the future zstd may conditionally enable this feature via an auto-detection + * heuristic for cold CDicts. + * Use ZSTD_ps_disable to opt out of prefetching under any circumstances. + */ +#define ZSTD_c_prefetchCDictTables ZSTD_c_experimentalParam16 + +/* ZSTD_c_enableSeqProducerFallback + * Allowed values are 0 (disable) and 1 (enable). The default setting is 0. + * + * Controls whether zstd will fall back to an internal sequence producer if an + * external sequence producer is registered and returns an error code. This fallback + * is block-by-block: the internal sequence producer will only be called for blocks + * where the external sequence producer returns an error code. Fallback parsing will + * follow any other cParam settings, such as compression level, the same as in a + * normal (fully-internal) compression operation. + * + * The user is strongly encouraged to read the full Block-Level Sequence Producer API + * documentation (below) before setting this parameter. */ +#define ZSTD_c_enableSeqProducerFallback ZSTD_c_experimentalParam17 + +/* ZSTD_c_maxBlockSize + * Allowed values are between 1KB and ZSTD_BLOCKSIZE_MAX (128KB). + * The default is ZSTD_BLOCKSIZE_MAX, and setting to 0 will set to the default. + * + * This parameter can be used to set an upper bound on the blocksize + * that overrides the default ZSTD_BLOCKSIZE_MAX. It cannot be used to set upper + * bounds greater than ZSTD_BLOCKSIZE_MAX or bounds lower than 1KB (will make + * compressBound() inaccurate). Only currently meant to be used for testing. + */ +#define ZSTD_c_maxBlockSize ZSTD_c_experimentalParam18 + +/* ZSTD_c_repcodeResolution + * This parameter only has an effect if ZSTD_c_blockDelimiters is + * set to ZSTD_sf_explicitBlockDelimiters (may change in the future). + * + * This parameter affects how zstd parses external sequences, + * provided via the ZSTD_compressSequences*() API + * or from an external block-level sequence producer. + * + * If set to ZSTD_ps_enable, the library will check for repeated offsets within + * external sequences, even if those repcodes are not explicitly indicated in + * the "rep" field. Note that this is the only way to exploit repcode matches + * while using compressSequences*() or an external sequence producer, since zstd + * currently ignores the "rep" field of external sequences. + * + * If set to ZSTD_ps_disable, the library will not exploit repeated offsets in + * external sequences, regardless of whether the "rep" field has been set. This + * reduces sequence compression overhead by about 25% while sacrificing some + * compression ratio. + * + * The default value is ZSTD_ps_auto, for which the library will enable/disable + * based on compression level (currently: level<10 disables, level>=10 enables). + */ +#define ZSTD_c_repcodeResolution ZSTD_c_experimentalParam19 +#define ZSTD_c_searchForExternalRepcodes ZSTD_c_experimentalParam19 /* older name */ + + +/*! ZSTD_CCtx_getParameter() : + * Get the requested compression parameter value, selected by enum ZSTD_cParameter, + * and store it into int* value. + * @return : 0, or an error code (which can be tested with ZSTD_isError()). + */ +ZSTDLIB_STATIC_API size_t ZSTD_CCtx_getParameter(const ZSTD_CCtx* cctx, ZSTD_cParameter param, int* value); + + +/*! ZSTD_CCtx_params : + * Quick howto : + * - ZSTD_createCCtxParams() : Create a ZSTD_CCtx_params structure + * - ZSTD_CCtxParams_setParameter() : Push parameters one by one into + * an existing ZSTD_CCtx_params structure. + * This is similar to + * ZSTD_CCtx_setParameter(). + * - ZSTD_CCtx_setParametersUsingCCtxParams() : Apply parameters to + * an existing CCtx. + * These parameters will be applied to + * all subsequent frames. + * - ZSTD_compressStream2() : Do compression using the CCtx. + * - ZSTD_freeCCtxParams() : Free the memory, accept NULL pointer. + * + * This can be used with ZSTD_estimateCCtxSize_advanced_usingCCtxParams() + * for static allocation of CCtx for single-threaded compression. + */ +ZSTDLIB_STATIC_API ZSTD_CCtx_params* ZSTD_createCCtxParams(void); +ZSTDLIB_STATIC_API size_t ZSTD_freeCCtxParams(ZSTD_CCtx_params* params); /* accept NULL pointer */ + +/*! ZSTD_CCtxParams_reset() : + * Reset params to default values. + */ +ZSTDLIB_STATIC_API size_t ZSTD_CCtxParams_reset(ZSTD_CCtx_params* params); + +/*! ZSTD_CCtxParams_init() : + * Initializes the compression parameters of cctxParams according to + * compression level. All other parameters are reset to their default values. + */ +ZSTDLIB_STATIC_API size_t ZSTD_CCtxParams_init(ZSTD_CCtx_params* cctxParams, int compressionLevel); + +/*! ZSTD_CCtxParams_init_advanced() : + * Initializes the compression and frame parameters of cctxParams according to + * params. All other parameters are reset to their default values. + */ +ZSTDLIB_STATIC_API size_t ZSTD_CCtxParams_init_advanced(ZSTD_CCtx_params* cctxParams, ZSTD_parameters params); + +/*! ZSTD_CCtxParams_setParameter() : Requires v1.4.0+ + * Similar to ZSTD_CCtx_setParameter. + * Set one compression parameter, selected by enum ZSTD_cParameter. + * Parameters must be applied to a ZSTD_CCtx using + * ZSTD_CCtx_setParametersUsingCCtxParams(). + * @result : a code representing success or failure (which can be tested with + * ZSTD_isError()). + */ +ZSTDLIB_STATIC_API size_t ZSTD_CCtxParams_setParameter(ZSTD_CCtx_params* params, ZSTD_cParameter param, int value); + +/*! ZSTD_CCtxParams_getParameter() : + * Similar to ZSTD_CCtx_getParameter. + * Get the requested value of one compression parameter, selected by enum ZSTD_cParameter. + * @result : 0, or an error code (which can be tested with ZSTD_isError()). + */ +ZSTDLIB_STATIC_API size_t ZSTD_CCtxParams_getParameter(const ZSTD_CCtx_params* params, ZSTD_cParameter param, int* value); + +/*! ZSTD_CCtx_setParametersUsingCCtxParams() : + * Apply a set of ZSTD_CCtx_params to the compression context. + * This can be done even after compression is started, + * if nbWorkers==0, this will have no impact until a new compression is started. + * if nbWorkers>=1, new parameters will be picked up at next job, + * with a few restrictions (windowLog, pledgedSrcSize, nbWorkers, jobSize, and overlapLog are not updated). + */ +ZSTDLIB_STATIC_API size_t ZSTD_CCtx_setParametersUsingCCtxParams( + ZSTD_CCtx* cctx, const ZSTD_CCtx_params* params); + +/*! ZSTD_compressStream2_simpleArgs() : + * Same as ZSTD_compressStream2(), + * but using only integral types as arguments. + * This variant might be helpful for binders from dynamic languages + * which have troubles handling structures containing memory pointers. + */ +ZSTDLIB_STATIC_API size_t ZSTD_compressStream2_simpleArgs ( + ZSTD_CCtx* cctx, + void* dst, size_t dstCapacity, size_t* dstPos, + const void* src, size_t srcSize, size_t* srcPos, + ZSTD_EndDirective endOp); + + +/*************************************** +* Advanced decompression functions +***************************************/ + +/*! ZSTD_isFrame() : + * Tells if the content of `buffer` starts with a valid Frame Identifier. + * Note : Frame Identifier is 4 bytes. If `size < 4`, @return will always be 0. + * Note 2 : Legacy Frame Identifiers are considered valid only if Legacy Support is enabled. + * Note 3 : Skippable Frame Identifiers are considered valid. */ +ZSTDLIB_STATIC_API unsigned ZSTD_isFrame(const void* buffer, size_t size); + +/*! ZSTD_createDDict_byReference() : + * Create a digested dictionary, ready to start decompression operation without startup delay. + * Dictionary content is referenced, and therefore stays in dictBuffer. + * It is important that dictBuffer outlives DDict, + * it must remain read accessible throughout the lifetime of DDict */ +ZSTDLIB_STATIC_API ZSTD_DDict* ZSTD_createDDict_byReference(const void* dictBuffer, size_t dictSize); + +/*! ZSTD_DCtx_loadDictionary_byReference() : + * Same as ZSTD_DCtx_loadDictionary(), + * but references `dict` content instead of copying it into `dctx`. + * This saves memory if `dict` remains around., + * However, it's imperative that `dict` remains accessible (and unmodified) while being used, so it must outlive decompression. */ +ZSTDLIB_STATIC_API size_t ZSTD_DCtx_loadDictionary_byReference(ZSTD_DCtx* dctx, const void* dict, size_t dictSize); + +/*! ZSTD_DCtx_loadDictionary_advanced() : + * Same as ZSTD_DCtx_loadDictionary(), + * but gives direct control over + * how to load the dictionary (by copy ? by reference ?) + * and how to interpret it (automatic ? force raw mode ? full mode only ?). */ +ZSTDLIB_STATIC_API size_t ZSTD_DCtx_loadDictionary_advanced(ZSTD_DCtx* dctx, const void* dict, size_t dictSize, ZSTD_dictLoadMethod_e dictLoadMethod, ZSTD_dictContentType_e dictContentType); + +/*! ZSTD_DCtx_refPrefix_advanced() : + * Same as ZSTD_DCtx_refPrefix(), but gives finer control over + * how to interpret prefix content (automatic ? force raw mode (default) ? full mode only ?) */ +ZSTDLIB_STATIC_API size_t ZSTD_DCtx_refPrefix_advanced(ZSTD_DCtx* dctx, const void* prefix, size_t prefixSize, ZSTD_dictContentType_e dictContentType); + +/*! ZSTD_DCtx_setMaxWindowSize() : + * Refuses allocating internal buffers for frames requiring a window size larger than provided limit. + * This protects a decoder context from reserving too much memory for itself (potential attack scenario). + * This parameter is only useful in streaming mode, since no internal buffer is allocated in single-pass mode. + * By default, a decompression context accepts all window sizes <= (1 << ZSTD_WINDOWLOG_LIMIT_DEFAULT) + * @return : 0, or an error code (which can be tested using ZSTD_isError()). + */ +ZSTDLIB_STATIC_API size_t ZSTD_DCtx_setMaxWindowSize(ZSTD_DCtx* dctx, size_t maxWindowSize); + +/*! ZSTD_DCtx_getParameter() : + * Get the requested decompression parameter value, selected by enum ZSTD_dParameter, + * and store it into int* value. + * @return : 0, or an error code (which can be tested with ZSTD_isError()). + */ +ZSTDLIB_STATIC_API size_t ZSTD_DCtx_getParameter(ZSTD_DCtx* dctx, ZSTD_dParameter param, int* value); + +/* ZSTD_d_format + * experimental parameter, + * allowing selection between ZSTD_format_e input compression formats + */ +#define ZSTD_d_format ZSTD_d_experimentalParam1 +/* ZSTD_d_stableOutBuffer + * Experimental parameter. + * Default is 0 == disabled. Set to 1 to enable. + * + * Tells the decompressor that the ZSTD_outBuffer will ALWAYS be the same + * between calls, except for the modifications that zstd makes to pos (the + * caller must not modify pos). This is checked by the decompressor, and + * decompression will fail if it ever changes. Therefore the ZSTD_outBuffer + * MUST be large enough to fit the entire decompressed frame. This will be + * checked when the frame content size is known. The data in the ZSTD_outBuffer + * in the range [dst, dst + pos) MUST not be modified during decompression + * or you will get data corruption. + * + * When this flag is enabled zstd won't allocate an output buffer, because + * it can write directly to the ZSTD_outBuffer, but it will still allocate + * an input buffer large enough to fit any compressed block. This will also + * avoid the memcpy() from the internal output buffer to the ZSTD_outBuffer. + * If you need to avoid the input buffer allocation use the buffer-less + * streaming API. + * + * NOTE: So long as the ZSTD_outBuffer always points to valid memory, using + * this flag is ALWAYS memory safe, and will never access out-of-bounds + * memory. However, decompression WILL fail if you violate the preconditions. + * + * WARNING: The data in the ZSTD_outBuffer in the range [dst, dst + pos) MUST + * not be modified during decompression or you will get data corruption. This + * is because zstd needs to reference data in the ZSTD_outBuffer to regenerate + * matches. Normally zstd maintains its own buffer for this purpose, but passing + * this flag tells zstd to use the user provided buffer. + */ +#define ZSTD_d_stableOutBuffer ZSTD_d_experimentalParam2 + +/* ZSTD_d_forceIgnoreChecksum + * Experimental parameter. + * Default is 0 == disabled. Set to 1 to enable + * + * Tells the decompressor to skip checksum validation during decompression, regardless + * of whether checksumming was specified during compression. This offers some + * slight performance benefits, and may be useful for debugging. + * Param has values of type ZSTD_forceIgnoreChecksum_e + */ +#define ZSTD_d_forceIgnoreChecksum ZSTD_d_experimentalParam3 + +/* ZSTD_d_refMultipleDDicts + * Experimental parameter. + * Default is 0 == disabled. Set to 1 to enable + * + * If enabled and dctx is allocated on the heap, then additional memory will be allocated + * to store references to multiple ZSTD_DDict. That is, multiple calls of ZSTD_refDDict() + * using a given ZSTD_DCtx, rather than overwriting the previous DDict reference, will instead + * store all references. At decompression time, the appropriate dictID is selected + * from the set of DDicts based on the dictID in the frame. + * + * Usage is simply calling ZSTD_refDDict() on multiple dict buffers. + * + * Param has values of byte ZSTD_refMultipleDDicts_e + * + * WARNING: Enabling this parameter and calling ZSTD_DCtx_refDDict(), will trigger memory + * allocation for the hash table. ZSTD_freeDCtx() also frees this memory. + * Memory is allocated as per ZSTD_DCtx::customMem. + * + * Although this function allocates memory for the table, the user is still responsible for + * memory management of the underlying ZSTD_DDict* themselves. + */ +#define ZSTD_d_refMultipleDDicts ZSTD_d_experimentalParam4 + +/* ZSTD_d_disableHuffmanAssembly + * Set to 1 to disable the Huffman assembly implementation. + * The default value is 0, which allows zstd to use the Huffman assembly + * implementation if available. + * + * This parameter can be used to disable Huffman assembly at runtime. + * If you want to disable it at compile time you can define the macro + * ZSTD_DISABLE_ASM. + */ +#define ZSTD_d_disableHuffmanAssembly ZSTD_d_experimentalParam5 + +/* ZSTD_d_maxBlockSize + * Allowed values are between 1KB and ZSTD_BLOCKSIZE_MAX (128KB). + * The default is ZSTD_BLOCKSIZE_MAX, and setting to 0 will set to the default. + * + * Forces the decompressor to reject blocks whose content size is + * larger than the configured maxBlockSize. When maxBlockSize is + * larger than the windowSize, the windowSize is used instead. + * This saves memory on the decoder when you know all blocks are small. + * + * This option is typically used in conjunction with ZSTD_c_maxBlockSize. + * + * WARNING: This causes the decoder to reject otherwise valid frames + * that have block sizes larger than the configured maxBlockSize. + */ +#define ZSTD_d_maxBlockSize ZSTD_d_experimentalParam6 + + +/*! ZSTD_DCtx_setFormat() : + * This function is REDUNDANT. Prefer ZSTD_DCtx_setParameter(). + * Instruct the decoder context about what kind of data to decode next. + * This instruction is mandatory to decode data without a fully-formed header, + * such ZSTD_f_zstd1_magicless for example. + * @return : 0, or an error code (which can be tested using ZSTD_isError()). */ +ZSTD_DEPRECATED("use ZSTD_DCtx_setParameter() instead") +ZSTDLIB_STATIC_API +size_t ZSTD_DCtx_setFormat(ZSTD_DCtx* dctx, ZSTD_format_e format); + +/*! ZSTD_decompressStream_simpleArgs() : + * Same as ZSTD_decompressStream(), + * but using only integral types as arguments. + * This can be helpful for binders from dynamic languages + * which have troubles handling structures containing memory pointers. + */ +ZSTDLIB_STATIC_API size_t ZSTD_decompressStream_simpleArgs ( + ZSTD_DCtx* dctx, + void* dst, size_t dstCapacity, size_t* dstPos, + const void* src, size_t srcSize, size_t* srcPos); + + +/******************************************************************** +* Advanced streaming functions +* Warning : most of these functions are now redundant with the Advanced API. +* Once Advanced API reaches "stable" status, +* redundant functions will be deprecated, and then at some point removed. +********************************************************************/ + +/*===== Advanced Streaming compression functions =====*/ + +/*! ZSTD_initCStream_srcSize() : + * This function is DEPRECATED, and equivalent to: + * ZSTD_CCtx_reset(zcs, ZSTD_reset_session_only); + * ZSTD_CCtx_refCDict(zcs, NULL); // clear the dictionary (if any) + * ZSTD_CCtx_setParameter(zcs, ZSTD_c_compressionLevel, compressionLevel); + * ZSTD_CCtx_setPledgedSrcSize(zcs, pledgedSrcSize); + * + * pledgedSrcSize must be correct. If it is not known at init time, use + * ZSTD_CONTENTSIZE_UNKNOWN. Note that, for compatibility with older programs, + * "0" also disables frame content size field. It may be enabled in the future. + * This prototype will generate compilation warnings. + */ +ZSTD_DEPRECATED("use ZSTD_CCtx_reset, see zstd.h for detailed instructions") +ZSTDLIB_STATIC_API +size_t ZSTD_initCStream_srcSize(ZSTD_CStream* zcs, + int compressionLevel, + unsigned long long pledgedSrcSize); + +/*! ZSTD_initCStream_usingDict() : + * This function is DEPRECATED, and is equivalent to: + * ZSTD_CCtx_reset(zcs, ZSTD_reset_session_only); + * ZSTD_CCtx_setParameter(zcs, ZSTD_c_compressionLevel, compressionLevel); + * ZSTD_CCtx_loadDictionary(zcs, dict, dictSize); + * + * Creates of an internal CDict (incompatible with static CCtx), except if + * dict == NULL or dictSize < 8, in which case no dict is used. + * Note: dict is loaded with ZSTD_dct_auto (treated as a full zstd dictionary if + * it begins with ZSTD_MAGIC_DICTIONARY, else as raw content) and ZSTD_dlm_byCopy. + * This prototype will generate compilation warnings. + */ +ZSTD_DEPRECATED("use ZSTD_CCtx_reset, see zstd.h for detailed instructions") +ZSTDLIB_STATIC_API +size_t ZSTD_initCStream_usingDict(ZSTD_CStream* zcs, + const void* dict, size_t dictSize, + int compressionLevel); + +/*! ZSTD_initCStream_advanced() : + * This function is DEPRECATED, and is equivalent to: + * ZSTD_CCtx_reset(zcs, ZSTD_reset_session_only); + * ZSTD_CCtx_setParams(zcs, params); + * ZSTD_CCtx_setPledgedSrcSize(zcs, pledgedSrcSize); + * ZSTD_CCtx_loadDictionary(zcs, dict, dictSize); + * + * dict is loaded with ZSTD_dct_auto and ZSTD_dlm_byCopy. + * pledgedSrcSize must be correct. + * If srcSize is not known at init time, use value ZSTD_CONTENTSIZE_UNKNOWN. + * This prototype will generate compilation warnings. + */ +ZSTD_DEPRECATED("use ZSTD_CCtx_reset, see zstd.h for detailed instructions") +ZSTDLIB_STATIC_API +size_t ZSTD_initCStream_advanced(ZSTD_CStream* zcs, + const void* dict, size_t dictSize, + ZSTD_parameters params, + unsigned long long pledgedSrcSize); + +/*! ZSTD_initCStream_usingCDict() : + * This function is DEPRECATED, and equivalent to: + * ZSTD_CCtx_reset(zcs, ZSTD_reset_session_only); + * ZSTD_CCtx_refCDict(zcs, cdict); + * + * note : cdict will just be referenced, and must outlive compression session + * This prototype will generate compilation warnings. + */ +ZSTD_DEPRECATED("use ZSTD_CCtx_reset and ZSTD_CCtx_refCDict, see zstd.h for detailed instructions") +ZSTDLIB_STATIC_API +size_t ZSTD_initCStream_usingCDict(ZSTD_CStream* zcs, const ZSTD_CDict* cdict); + +/*! ZSTD_initCStream_usingCDict_advanced() : + * This function is DEPRECATED, and is equivalent to: + * ZSTD_CCtx_reset(zcs, ZSTD_reset_session_only); + * ZSTD_CCtx_setFParams(zcs, fParams); + * ZSTD_CCtx_setPledgedSrcSize(zcs, pledgedSrcSize); + * ZSTD_CCtx_refCDict(zcs, cdict); + * + * same as ZSTD_initCStream_usingCDict(), with control over frame parameters. + * pledgedSrcSize must be correct. If srcSize is not known at init time, use + * value ZSTD_CONTENTSIZE_UNKNOWN. + * This prototype will generate compilation warnings. + */ +ZSTD_DEPRECATED("use ZSTD_CCtx_reset and ZSTD_CCtx_refCDict, see zstd.h for detailed instructions") +ZSTDLIB_STATIC_API +size_t ZSTD_initCStream_usingCDict_advanced(ZSTD_CStream* zcs, + const ZSTD_CDict* cdict, + ZSTD_frameParameters fParams, + unsigned long long pledgedSrcSize); + +/*! ZSTD_resetCStream() : + * This function is DEPRECATED, and is equivalent to: + * ZSTD_CCtx_reset(zcs, ZSTD_reset_session_only); + * ZSTD_CCtx_setPledgedSrcSize(zcs, pledgedSrcSize); + * Note: ZSTD_resetCStream() interprets pledgedSrcSize == 0 as ZSTD_CONTENTSIZE_UNKNOWN, but + * ZSTD_CCtx_setPledgedSrcSize() does not do the same, so ZSTD_CONTENTSIZE_UNKNOWN must be + * explicitly specified. + * + * start a new frame, using same parameters from previous frame. + * This is typically useful to skip dictionary loading stage, since it will reuse it in-place. + * Note that zcs must be init at least once before using ZSTD_resetCStream(). + * If pledgedSrcSize is not known at reset time, use macro ZSTD_CONTENTSIZE_UNKNOWN. + * If pledgedSrcSize > 0, its value must be correct, as it will be written in header, and controlled at the end. + * For the time being, pledgedSrcSize==0 is interpreted as "srcSize unknown" for compatibility with older programs, + * but it will change to mean "empty" in future version, so use macro ZSTD_CONTENTSIZE_UNKNOWN instead. + * @return : 0, or an error code (which can be tested using ZSTD_isError()) + * This prototype will generate compilation warnings. + */ +ZSTD_DEPRECATED("use ZSTD_CCtx_reset, see zstd.h for detailed instructions") +ZSTDLIB_STATIC_API +size_t ZSTD_resetCStream(ZSTD_CStream* zcs, unsigned long long pledgedSrcSize); + + +typedef struct { + unsigned long long ingested; /* nb input bytes read and buffered */ + unsigned long long consumed; /* nb input bytes actually compressed */ + unsigned long long produced; /* nb of compressed bytes generated and buffered */ + unsigned long long flushed; /* nb of compressed bytes flushed : not provided; can be tracked from caller side */ + unsigned currentJobID; /* MT only : latest started job nb */ + unsigned nbActiveWorkers; /* MT only : nb of workers actively compressing at probe time */ +} ZSTD_frameProgression; + +/* ZSTD_getFrameProgression() : + * tells how much data has been ingested (read from input) + * consumed (input actually compressed) and produced (output) for current frame. + * Note : (ingested - consumed) is amount of input data buffered internally, not yet compressed. + * Aggregates progression inside active worker threads. + */ +ZSTDLIB_STATIC_API ZSTD_frameProgression ZSTD_getFrameProgression(const ZSTD_CCtx* cctx); + +/*! ZSTD_toFlushNow() : + * Tell how many bytes are ready to be flushed immediately. + * Useful for multithreading scenarios (nbWorkers >= 1). + * Probe the oldest active job, defined as oldest job not yet entirely flushed, + * and check its output buffer. + * @return : amount of data stored in oldest job and ready to be flushed immediately. + * if @return == 0, it means either : + * + there is no active job (could be checked with ZSTD_frameProgression()), or + * + oldest job is still actively compressing data, + * but everything it has produced has also been flushed so far, + * therefore flush speed is limited by production speed of oldest job + * irrespective of the speed of concurrent (and newer) jobs. + */ +ZSTDLIB_STATIC_API size_t ZSTD_toFlushNow(ZSTD_CCtx* cctx); + + +/*===== Advanced Streaming decompression functions =====*/ + +/*! + * This function is deprecated, and is equivalent to: + * + * ZSTD_DCtx_reset(zds, ZSTD_reset_session_only); + * ZSTD_DCtx_loadDictionary(zds, dict, dictSize); + * + * note: no dictionary will be used if dict == NULL or dictSize < 8 + */ +ZSTD_DEPRECATED("use ZSTD_DCtx_reset + ZSTD_DCtx_loadDictionary, see zstd.h for detailed instructions") +ZSTDLIB_STATIC_API size_t ZSTD_initDStream_usingDict(ZSTD_DStream* zds, const void* dict, size_t dictSize); + +/*! + * This function is deprecated, and is equivalent to: + * + * ZSTD_DCtx_reset(zds, ZSTD_reset_session_only); + * ZSTD_DCtx_refDDict(zds, ddict); + * + * note : ddict is referenced, it must outlive decompression session + */ +ZSTD_DEPRECATED("use ZSTD_DCtx_reset + ZSTD_DCtx_refDDict, see zstd.h for detailed instructions") +ZSTDLIB_STATIC_API size_t ZSTD_initDStream_usingDDict(ZSTD_DStream* zds, const ZSTD_DDict* ddict); + +/*! + * This function is deprecated, and is equivalent to: + * + * ZSTD_DCtx_reset(zds, ZSTD_reset_session_only); + * + * reuse decompression parameters from previous init; saves dictionary loading + */ +ZSTD_DEPRECATED("use ZSTD_DCtx_reset, see zstd.h for detailed instructions") +ZSTDLIB_STATIC_API size_t ZSTD_resetDStream(ZSTD_DStream* zds); + + +/* ********************* BLOCK-LEVEL SEQUENCE PRODUCER API ********************* + * + * *** OVERVIEW *** + * The Block-Level Sequence Producer API allows users to provide their own custom + * sequence producer which libzstd invokes to process each block. The produced list + * of sequences (literals and matches) is then post-processed by libzstd to produce + * valid compressed blocks. + * + * This block-level offload API is a more granular complement of the existing + * frame-level offload API compressSequences() (introduced in v1.5.1). It offers + * an easier migration story for applications already integrated with libzstd: the + * user application continues to invoke the same compression functions + * ZSTD_compress2() or ZSTD_compressStream2() as usual, and transparently benefits + * from the specific advantages of the external sequence producer. For example, + * the sequence producer could be tuned to take advantage of known characteristics + * of the input, to offer better speed / ratio, or could leverage hardware + * acceleration not available within libzstd itself. + * + * See contrib/externalSequenceProducer for an example program employing the + * Block-Level Sequence Producer API. + * + * *** USAGE *** + * The user is responsible for implementing a function of type + * ZSTD_sequenceProducer_F. For each block, zstd will pass the following + * arguments to the user-provided function: + * + * - sequenceProducerState: a pointer to a user-managed state for the sequence + * producer. + * + * - outSeqs, outSeqsCapacity: an output buffer for the sequence producer. + * outSeqsCapacity is guaranteed >= ZSTD_sequenceBound(srcSize). The memory + * backing outSeqs is managed by the CCtx. + * + * - src, srcSize: an input buffer for the sequence producer to parse. + * srcSize is guaranteed to be <= ZSTD_BLOCKSIZE_MAX. + * + * - dict, dictSize: a history buffer, which may be empty, which the sequence + * producer may reference as it parses the src buffer. Currently, zstd will + * always pass dictSize == 0 into external sequence producers, but this will + * change in the future. + * + * - compressionLevel: a signed integer representing the zstd compression level + * set by the user for the current operation. The sequence producer may choose + * to use this information to change its compression strategy and speed/ratio + * tradeoff. Note: the compression level does not reflect zstd parameters set + * through the advanced API. + * + * - windowSize: a size_t representing the maximum allowed offset for external + * sequences. Note that sequence offsets are sometimes allowed to exceed the + * windowSize if a dictionary is present, see doc/zstd_compression_format.md + * for details. + * + * The user-provided function shall return a size_t representing the number of + * sequences written to outSeqs. This return value will be treated as an error + * code if it is greater than outSeqsCapacity. The return value must be non-zero + * if srcSize is non-zero. The ZSTD_SEQUENCE_PRODUCER_ERROR macro is provided + * for convenience, but any value greater than outSeqsCapacity will be treated as + * an error code. + * + * If the user-provided function does not return an error code, the sequences + * written to outSeqs must be a valid parse of the src buffer. Data corruption may + * occur if the parse is not valid. A parse is defined to be valid if the + * following conditions hold: + * - The sum of matchLengths and literalLengths must equal srcSize. + * - All sequences in the parse, except for the final sequence, must have + * matchLength >= ZSTD_MINMATCH_MIN. The final sequence must have + * matchLength >= ZSTD_MINMATCH_MIN or matchLength == 0. + * - All offsets must respect the windowSize parameter as specified in + * doc/zstd_compression_format.md. + * - If the final sequence has matchLength == 0, it must also have offset == 0. + * + * zstd will only validate these conditions (and fail compression if they do not + * hold) if the ZSTD_c_validateSequences cParam is enabled. Note that sequence + * validation has a performance cost. + * + * If the user-provided function returns an error, zstd will either fall back + * to an internal sequence producer or fail the compression operation. The user can + * choose between the two behaviors by setting the ZSTD_c_enableSeqProducerFallback + * cParam. Fallback compression will follow any other cParam settings, such as + * compression level, the same as in a normal compression operation. + * + * The user shall instruct zstd to use a particular ZSTD_sequenceProducer_F + * function by calling + * ZSTD_registerSequenceProducer(cctx, + * sequenceProducerState, + * sequenceProducer) + * This setting will persist until the next parameter reset of the CCtx. + * + * The sequenceProducerState must be initialized by the user before calling + * ZSTD_registerSequenceProducer(). The user is responsible for destroying the + * sequenceProducerState. + * + * *** LIMITATIONS *** + * This API is compatible with all zstd compression APIs which respect advanced parameters. + * However, there are three limitations: + * + * First, the ZSTD_c_enableLongDistanceMatching cParam is not currently supported. + * COMPRESSION WILL FAIL if it is enabled and the user tries to compress with a block-level + * external sequence producer. + * - Note that ZSTD_c_enableLongDistanceMatching is auto-enabled by default in some + * cases (see its documentation for details). Users must explicitly set + * ZSTD_c_enableLongDistanceMatching to ZSTD_ps_disable in such cases if an external + * sequence producer is registered. + * - As of this writing, ZSTD_c_enableLongDistanceMatching is disabled by default + * whenever ZSTD_c_windowLog < 128MB, but that's subject to change. Users should + * check the docs on ZSTD_c_enableLongDistanceMatching whenever the Block-Level Sequence + * Producer API is used in conjunction with advanced settings (like ZSTD_c_windowLog). + * + * Second, history buffers are not currently supported. Concretely, zstd will always pass + * dictSize == 0 to the external sequence producer (for now). This has two implications: + * - Dictionaries are not currently supported. Compression will *not* fail if the user + * references a dictionary, but the dictionary won't have any effect. + * - Stream history is not currently supported. All advanced compression APIs, including + * streaming APIs, work with external sequence producers, but each block is treated as + * an independent chunk without history from previous blocks. + * + * Third, multi-threading within a single compression is not currently supported. In other words, + * COMPRESSION WILL FAIL if ZSTD_c_nbWorkers > 0 and an external sequence producer is registered. + * Multi-threading across compressions is fine: simply create one CCtx per thread. + * + * Long-term, we plan to overcome all three limitations. There is no technical blocker to + * overcoming them. It is purely a question of engineering effort. + */ + +#define ZSTD_SEQUENCE_PRODUCER_ERROR ((size_t)(-1)) + +typedef size_t (*ZSTD_sequenceProducer_F) ( + void* sequenceProducerState, + ZSTD_Sequence* outSeqs, size_t outSeqsCapacity, + const void* src, size_t srcSize, + const void* dict, size_t dictSize, + int compressionLevel, + size_t windowSize +); + +/*! ZSTD_registerSequenceProducer() : + * Instruct zstd to use a block-level external sequence producer function. + * + * The sequenceProducerState must be initialized by the caller, and the caller is + * responsible for managing its lifetime. This parameter is sticky across + * compressions. It will remain set until the user explicitly resets compression + * parameters. + * + * Sequence producer registration is considered to be an "advanced parameter", + * part of the "advanced API". This means it will only have an effect on compression + * APIs which respect advanced parameters, such as compress2() and compressStream2(). + * Older compression APIs such as compressCCtx(), which predate the introduction of + * "advanced parameters", will ignore any external sequence producer setting. + * + * The sequence producer can be "cleared" by registering a NULL function pointer. This + * removes all limitations described above in the "LIMITATIONS" section of the API docs. + * + * The user is strongly encouraged to read the full API documentation (above) before + * calling this function. */ +ZSTDLIB_STATIC_API void +ZSTD_registerSequenceProducer( + ZSTD_CCtx* cctx, + void* sequenceProducerState, + ZSTD_sequenceProducer_F sequenceProducer +); + +/*! ZSTD_CCtxParams_registerSequenceProducer() : + * Same as ZSTD_registerSequenceProducer(), but operates on ZSTD_CCtx_params. + * This is used for accurate size estimation with ZSTD_estimateCCtxSize_usingCCtxParams(), + * which is needed when creating a ZSTD_CCtx with ZSTD_initStaticCCtx(). + * + * If you are using the external sequence producer API in a scenario where ZSTD_initStaticCCtx() + * is required, then this function is for you. Otherwise, you probably don't need it. + * + * See tests/zstreamtest.c for example usage. */ +ZSTDLIB_STATIC_API void +ZSTD_CCtxParams_registerSequenceProducer( + ZSTD_CCtx_params* params, + void* sequenceProducerState, + ZSTD_sequenceProducer_F sequenceProducer +); + + +/********************************************************************* +* Buffer-less and synchronous inner streaming functions (DEPRECATED) +* +* This API is deprecated, and will be removed in a future version. +* It allows streaming (de)compression with user allocated buffers. +* However, it is hard to use, and not as well tested as the rest of +* our API. +* +* Please use the normal streaming API instead: ZSTD_compressStream2, +* and ZSTD_decompressStream. +* If there is functionality that you need, but it doesn't provide, +* please open an issue on our GitHub. +********************************************************************* */ + +/** + Buffer-less streaming compression (synchronous mode) + + A ZSTD_CCtx object is required to track streaming operations. + Use ZSTD_createCCtx() / ZSTD_freeCCtx() to manage resource. + ZSTD_CCtx object can be reused multiple times within successive compression operations. + + Start by initializing a context. + Use ZSTD_compressBegin(), or ZSTD_compressBegin_usingDict() for dictionary compression. + + Then, consume your input using ZSTD_compressContinue(). + There are some important considerations to keep in mind when using this advanced function : + - ZSTD_compressContinue() has no internal buffer. It uses externally provided buffers only. + - Interface is synchronous : input is consumed entirely and produces 1+ compressed blocks. + - Caller must ensure there is enough space in `dst` to store compressed data under worst case scenario. + Worst case evaluation is provided by ZSTD_compressBound(). + ZSTD_compressContinue() doesn't guarantee recover after a failed compression. + - ZSTD_compressContinue() presumes prior input ***is still accessible and unmodified*** (up to maximum distance size, see WindowLog). + It remembers all previous contiguous blocks, plus one separated memory segment (which can itself consists of multiple contiguous blocks) + - ZSTD_compressContinue() detects that prior input has been overwritten when `src` buffer overlaps. + In which case, it will "discard" the relevant memory section from its history. + + Finish a frame with ZSTD_compressEnd(), which will write the last block(s) and optional checksum. + It's possible to use srcSize==0, in which case, it will write a final empty block to end the frame. + Without last block mark, frames are considered unfinished (hence corrupted) by compliant decoders. + + `ZSTD_CCtx` object can be reused (ZSTD_compressBegin()) to compress again. +*/ + +/*===== Buffer-less streaming compression functions =====*/ +ZSTD_DEPRECATED("The buffer-less API is deprecated in favor of the normal streaming API. See docs.") +ZSTDLIB_STATIC_API size_t ZSTD_compressBegin(ZSTD_CCtx* cctx, int compressionLevel); +ZSTD_DEPRECATED("The buffer-less API is deprecated in favor of the normal streaming API. See docs.") +ZSTDLIB_STATIC_API size_t ZSTD_compressBegin_usingDict(ZSTD_CCtx* cctx, const void* dict, size_t dictSize, int compressionLevel); +ZSTD_DEPRECATED("The buffer-less API is deprecated in favor of the normal streaming API. See docs.") +ZSTDLIB_STATIC_API size_t ZSTD_compressBegin_usingCDict(ZSTD_CCtx* cctx, const ZSTD_CDict* cdict); /**< note: fails if cdict==NULL */ + +ZSTD_DEPRECATED("This function will likely be removed in a future release. It is misleading and has very limited utility.") +ZSTDLIB_STATIC_API +size_t ZSTD_copyCCtx(ZSTD_CCtx* cctx, const ZSTD_CCtx* preparedCCtx, unsigned long long pledgedSrcSize); /**< note: if pledgedSrcSize is not known, use ZSTD_CONTENTSIZE_UNKNOWN */ + +ZSTD_DEPRECATED("The buffer-less API is deprecated in favor of the normal streaming API. See docs.") +ZSTDLIB_STATIC_API size_t ZSTD_compressContinue(ZSTD_CCtx* cctx, void* dst, size_t dstCapacity, const void* src, size_t srcSize); +ZSTD_DEPRECATED("The buffer-less API is deprecated in favor of the normal streaming API. See docs.") +ZSTDLIB_STATIC_API size_t ZSTD_compressEnd(ZSTD_CCtx* cctx, void* dst, size_t dstCapacity, const void* src, size_t srcSize); + +/* The ZSTD_compressBegin_advanced() and ZSTD_compressBegin_usingCDict_advanced() are now DEPRECATED and will generate a compiler warning */ +ZSTD_DEPRECATED("use advanced API to access custom parameters") +ZSTDLIB_STATIC_API +size_t ZSTD_compressBegin_advanced(ZSTD_CCtx* cctx, const void* dict, size_t dictSize, ZSTD_parameters params, unsigned long long pledgedSrcSize); /**< pledgedSrcSize : If srcSize is not known at init time, use ZSTD_CONTENTSIZE_UNKNOWN */ +ZSTD_DEPRECATED("use advanced API to access custom parameters") +ZSTDLIB_STATIC_API +size_t ZSTD_compressBegin_usingCDict_advanced(ZSTD_CCtx* const cctx, const ZSTD_CDict* const cdict, ZSTD_frameParameters const fParams, unsigned long long const pledgedSrcSize); /* compression parameters are already set within cdict. pledgedSrcSize must be correct. If srcSize is not known, use macro ZSTD_CONTENTSIZE_UNKNOWN */ +/** + Buffer-less streaming decompression (synchronous mode) + + A ZSTD_DCtx object is required to track streaming operations. + Use ZSTD_createDCtx() / ZSTD_freeDCtx() to manage it. + A ZSTD_DCtx object can be reused multiple times. + + First typical operation is to retrieve frame parameters, using ZSTD_getFrameHeader(). + Frame header is extracted from the beginning of compressed frame, so providing only the frame's beginning is enough. + Data fragment must be large enough to ensure successful decoding. + `ZSTD_frameHeaderSize_max` bytes is guaranteed to always be large enough. + result : 0 : successful decoding, the `ZSTD_frameHeader` structure is correctly filled. + >0 : `srcSize` is too small, please provide at least result bytes on next attempt. + errorCode, which can be tested using ZSTD_isError(). + + It fills a ZSTD_FrameHeader structure with important information to correctly decode the frame, + such as the dictionary ID, content size, or maximum back-reference distance (`windowSize`). + Note that these values could be wrong, either because of data corruption, or because a 3rd party deliberately spoofs false information. + As a consequence, check that values remain within valid application range. + For example, do not allocate memory blindly, check that `windowSize` is within expectation. + Each application can set its own limits, depending on local restrictions. + For extended interoperability, it is recommended to support `windowSize` of at least 8 MB. + + ZSTD_decompressContinue() needs previous data blocks during decompression, up to `windowSize` bytes. + ZSTD_decompressContinue() is very sensitive to contiguity, + if 2 blocks don't follow each other, make sure that either the compressor breaks contiguity at the same place, + or that previous contiguous segment is large enough to properly handle maximum back-reference distance. + There are multiple ways to guarantee this condition. + + The most memory efficient way is to use a round buffer of sufficient size. + Sufficient size is determined by invoking ZSTD_decodingBufferSize_min(), + which can return an error code if required value is too large for current system (in 32-bits mode). + In a round buffer methodology, ZSTD_decompressContinue() decompresses each block next to previous one, + up to the moment there is not enough room left in the buffer to guarantee decoding another full block, + which maximum size is provided in `ZSTD_frameHeader` structure, field `blockSizeMax`. + At which point, decoding can resume from the beginning of the buffer. + Note that already decoded data stored in the buffer should be flushed before being overwritten. + + There are alternatives possible, for example using two or more buffers of size `windowSize` each, though they consume more memory. + + Finally, if you control the compression process, you can also ignore all buffer size rules, + as long as the encoder and decoder progress in "lock-step", + aka use exactly the same buffer sizes, break contiguity at the same place, etc. + + Once buffers are setup, start decompression, with ZSTD_decompressBegin(). + If decompression requires a dictionary, use ZSTD_decompressBegin_usingDict() or ZSTD_decompressBegin_usingDDict(). + + Then use ZSTD_nextSrcSizeToDecompress() and ZSTD_decompressContinue() alternatively. + ZSTD_nextSrcSizeToDecompress() tells how many bytes to provide as 'srcSize' to ZSTD_decompressContinue(). + ZSTD_decompressContinue() requires this _exact_ amount of bytes, or it will fail. + + result of ZSTD_decompressContinue() is the number of bytes regenerated within 'dst' (necessarily <= dstCapacity). + It can be zero : it just means ZSTD_decompressContinue() has decoded some metadata item. + It can also be an error code, which can be tested with ZSTD_isError(). + + A frame is fully decoded when ZSTD_nextSrcSizeToDecompress() returns zero. + Context can then be reset to start a new decompression. + + Note : it's possible to know if next input to present is a header or a block, using ZSTD_nextInputType(). + This information is not required to properly decode a frame. + + == Special case : skippable frames == + + Skippable frames allow integration of user-defined data into a flow of concatenated frames. + Skippable frames will be ignored (skipped) by decompressor. + The format of skippable frames is as follows : + a) Skippable frame ID - 4 Bytes, Little endian format, any value from 0x184D2A50 to 0x184D2A5F + b) Frame Size - 4 Bytes, Little endian format, unsigned 32-bits + c) Frame Content - any content (User Data) of length equal to Frame Size + For skippable frames ZSTD_getFrameHeader() returns zfhPtr->frameType==ZSTD_skippableFrame. + For skippable frames ZSTD_decompressContinue() always returns 0 : it only skips the content. +*/ + +/*===== Buffer-less streaming decompression functions =====*/ + +ZSTDLIB_STATIC_API size_t ZSTD_decodingBufferSize_min(unsigned long long windowSize, unsigned long long frameContentSize); /**< when frame content size is not known, pass in frameContentSize == ZSTD_CONTENTSIZE_UNKNOWN */ + +ZSTDLIB_STATIC_API size_t ZSTD_decompressBegin(ZSTD_DCtx* dctx); +ZSTDLIB_STATIC_API size_t ZSTD_decompressBegin_usingDict(ZSTD_DCtx* dctx, const void* dict, size_t dictSize); +ZSTDLIB_STATIC_API size_t ZSTD_decompressBegin_usingDDict(ZSTD_DCtx* dctx, const ZSTD_DDict* ddict); + +ZSTDLIB_STATIC_API size_t ZSTD_nextSrcSizeToDecompress(ZSTD_DCtx* dctx); +ZSTDLIB_STATIC_API size_t ZSTD_decompressContinue(ZSTD_DCtx* dctx, void* dst, size_t dstCapacity, const void* src, size_t srcSize); + +/* misc */ +ZSTD_DEPRECATED("This function will likely be removed in the next minor release. It is misleading and has very limited utility.") +ZSTDLIB_STATIC_API void ZSTD_copyDCtx(ZSTD_DCtx* dctx, const ZSTD_DCtx* preparedDCtx); +typedef enum { ZSTDnit_frameHeader, ZSTDnit_blockHeader, ZSTDnit_block, ZSTDnit_lastBlock, ZSTDnit_checksum, ZSTDnit_skippableFrame } ZSTD_nextInputType_e; +ZSTDLIB_STATIC_API ZSTD_nextInputType_e ZSTD_nextInputType(ZSTD_DCtx* dctx); + + + +/*! ZSTD_isDeterministicBuild() : + * Returns 1 if the library is built using standard compilation flags, + * and participates in determinism guarantees with other builds of the + * same version. + * If this function returns 0, it means the library was compiled with + * non-standard compilation flags that change the output of the + * compressor. + * This is mainly used for Zstd's determinism test suite, which is only + * run when this function returns 1. + */ +ZSTDLIB_API int ZSTD_isDeterministicBuild(void); + + +/* ========================================= */ +/** Block level API (DEPRECATED) */ +/* ========================================= */ + +/*! + + This API is deprecated in favor of the regular compression API. + You can get the frame header down to 2 bytes by setting: + - ZSTD_c_format = ZSTD_f_zstd1_magicless + - ZSTD_c_contentSizeFlag = 0 + - ZSTD_c_checksumFlag = 0 + - ZSTD_c_dictIDFlag = 0 + + This API is not as well tested as our normal API, so we recommend not using it. + We will be removing it in a future version. If the normal API doesn't provide + the functionality you need, please open a GitHub issue. + + Block functions produce and decode raw zstd blocks, without frame metadata. + Frame metadata cost is typically ~12 bytes, which can be non-negligible for very small blocks (< 100 bytes). + But users will have to take in charge needed metadata to regenerate data, such as compressed and content sizes. + + A few rules to respect : + - Compressing and decompressing require a context structure + + Use ZSTD_createCCtx() and ZSTD_createDCtx() + - It is necessary to init context before starting + + compression : any ZSTD_compressBegin*() variant, including with dictionary + + decompression : any ZSTD_decompressBegin*() variant, including with dictionary + - Block size is limited, it must be <= ZSTD_getBlockSize() <= ZSTD_BLOCKSIZE_MAX == 128 KB + + If input is larger than a block size, it's necessary to split input data into multiple blocks + + For inputs larger than a single block, consider using regular ZSTD_compress() instead. + Frame metadata is not that costly, and quickly becomes negligible as source size grows larger than a block. + - When a block is considered not compressible enough, ZSTD_compressBlock() result will be 0 (zero) ! + ===> In which case, nothing is produced into `dst` ! + + User __must__ test for such outcome and deal directly with uncompressed data + + A block cannot be declared incompressible if ZSTD_compressBlock() return value was != 0. + Doing so would mess up with statistics history, leading to potential data corruption. + + ZSTD_decompressBlock() _doesn't accept uncompressed data as input_ !! + + In case of multiple successive blocks, should some of them be uncompressed, + decoder must be informed of their existence in order to follow proper history. + Use ZSTD_insertBlock() for such a case. +*/ + +/*===== Raw zstd block functions =====*/ +ZSTD_DEPRECATED("The block API is deprecated in favor of the normal compression API. See docs.") +ZSTDLIB_STATIC_API size_t ZSTD_getBlockSize (const ZSTD_CCtx* cctx); +ZSTD_DEPRECATED("The block API is deprecated in favor of the normal compression API. See docs.") +ZSTDLIB_STATIC_API size_t ZSTD_compressBlock (ZSTD_CCtx* cctx, void* dst, size_t dstCapacity, const void* src, size_t srcSize); +ZSTD_DEPRECATED("The block API is deprecated in favor of the normal compression API. See docs.") +ZSTDLIB_STATIC_API size_t ZSTD_decompressBlock(ZSTD_DCtx* dctx, void* dst, size_t dstCapacity, const void* src, size_t srcSize); +ZSTD_DEPRECATED("The block API is deprecated in favor of the normal compression API. See docs.") +ZSTDLIB_STATIC_API size_t ZSTD_insertBlock (ZSTD_DCtx* dctx, const void* blockStart, size_t blockSize); /**< insert uncompressed block into `dctx` history. Useful for multi-blocks decompression. */ + +#if defined (__cplusplus) +} +#endif + +#endif /* ZSTD_H_ZSTD_STATIC_LINKING_ONLY */ diff --git a/dependencies/winx64/include/zstd_errors.h b/dependencies/winx64/include/zstd_errors.h new file mode 100644 index 0000000..8ebc95c --- /dev/null +++ b/dependencies/winx64/include/zstd_errors.h @@ -0,0 +1,107 @@ +/* + * Copyright (c) Meta Platforms, Inc. and affiliates. + * All rights reserved. + * + * This source code is licensed under both the BSD-style license (found in the + * LICENSE file in the root directory of this source tree) and the GPLv2 (found + * in the COPYING file in the root directory of this source tree). + * You may select, at your option, one of the above-listed licenses. + */ + +#ifndef ZSTD_ERRORS_H_398273423 +#define ZSTD_ERRORS_H_398273423 + +#if defined (__cplusplus) +extern "C" { +#endif + +/* ===== ZSTDERRORLIB_API : control library symbols visibility ===== */ +#ifndef ZSTDERRORLIB_VISIBLE + /* Backwards compatibility with old macro name */ +# ifdef ZSTDERRORLIB_VISIBILITY +# define ZSTDERRORLIB_VISIBLE ZSTDERRORLIB_VISIBILITY +# elif defined(__GNUC__) && (__GNUC__ >= 4) && !defined(__MINGW32__) +# define ZSTDERRORLIB_VISIBLE __attribute__ ((visibility ("default"))) +# else +# define ZSTDERRORLIB_VISIBLE +# endif +#endif + +#ifndef ZSTDERRORLIB_HIDDEN +# if defined(__GNUC__) && (__GNUC__ >= 4) && !defined(__MINGW32__) +# define ZSTDERRORLIB_HIDDEN __attribute__ ((visibility ("hidden"))) +# else +# define ZSTDERRORLIB_HIDDEN +# endif +#endif + +#if defined(ZSTD_DLL_EXPORT) && (ZSTD_DLL_EXPORT==1) +# define ZSTDERRORLIB_API __declspec(dllexport) ZSTDERRORLIB_VISIBLE +#elif defined(ZSTD_DLL_IMPORT) && (ZSTD_DLL_IMPORT==1) +# define ZSTDERRORLIB_API __declspec(dllimport) ZSTDERRORLIB_VISIBLE /* It isn't required but allows to generate better code, saving a function pointer load from the IAT and an indirect jump.*/ +#else +# define ZSTDERRORLIB_API ZSTDERRORLIB_VISIBLE +#endif + +/*-********************************************* + * Error codes list + *-********************************************* + * Error codes _values_ are pinned down since v1.3.1 only. + * Therefore, don't rely on values if you may link to any version < v1.3.1. + * + * Only values < 100 are considered stable. + * + * note 1 : this API shall be used with static linking only. + * dynamic linking is not yet officially supported. + * note 2 : Prefer relying on the enum than on its value whenever possible + * This is the only supported way to use the error list < v1.3.1 + * note 3 : ZSTD_isError() is always correct, whatever the library version. + **********************************************/ +typedef enum { + ZSTD_error_no_error = 0, + ZSTD_error_GENERIC = 1, + ZSTD_error_prefix_unknown = 10, + ZSTD_error_version_unsupported = 12, + ZSTD_error_frameParameter_unsupported = 14, + ZSTD_error_frameParameter_windowTooLarge = 16, + ZSTD_error_corruption_detected = 20, + ZSTD_error_checksum_wrong = 22, + ZSTD_error_literals_headerWrong = 24, + ZSTD_error_dictionary_corrupted = 30, + ZSTD_error_dictionary_wrong = 32, + ZSTD_error_dictionaryCreation_failed = 34, + ZSTD_error_parameter_unsupported = 40, + ZSTD_error_parameter_combination_unsupported = 41, + ZSTD_error_parameter_outOfBound = 42, + ZSTD_error_tableLog_tooLarge = 44, + ZSTD_error_maxSymbolValue_tooLarge = 46, + ZSTD_error_maxSymbolValue_tooSmall = 48, + ZSTD_error_cannotProduce_uncompressedBlock = 49, + ZSTD_error_stabilityCondition_notRespected = 50, + ZSTD_error_stage_wrong = 60, + ZSTD_error_init_missing = 62, + ZSTD_error_memory_allocation = 64, + ZSTD_error_workSpace_tooSmall= 66, + ZSTD_error_dstSize_tooSmall = 70, + ZSTD_error_srcSize_wrong = 72, + ZSTD_error_dstBuffer_null = 74, + ZSTD_error_noForwardProgress_destFull = 80, + ZSTD_error_noForwardProgress_inputEmpty = 82, + /* following error codes are __NOT STABLE__, they can be removed or changed in future versions */ + ZSTD_error_frameIndex_tooLarge = 100, + ZSTD_error_seekableIO = 102, + ZSTD_error_dstBuffer_wrong = 104, + ZSTD_error_srcBuffer_wrong = 105, + ZSTD_error_sequenceProducer_failed = 106, + ZSTD_error_externalSequences_invalid = 107, + ZSTD_error_maxCode = 120 /* never EVER use this value directly, it can change in future versions! Use ZSTD_isError() instead */ +} ZSTD_ErrorCode; + +ZSTDERRORLIB_API const char* ZSTD_getErrorString(ZSTD_ErrorCode code); /**< Same as ZSTD_getErrorName, but using a `ZSTD_ErrorCode` enum argument */ + + +#if defined (__cplusplus) +} +#endif + +#endif /* ZSTD_ERRORS_H_398273423 */ diff --git a/dependencies/winx64/lib/libbrotlicommon.a b/dependencies/winx64/lib/libbrotlicommon.a new file mode 100644 index 0000000..62972a3 Binary files /dev/null and b/dependencies/winx64/lib/libbrotlicommon.a differ diff --git a/dependencies/winx64/lib/libbrotlidec.a b/dependencies/winx64/lib/libbrotlidec.a new file mode 100644 index 0000000..c7a2eba Binary files /dev/null and b/dependencies/winx64/lib/libbrotlidec.a differ diff --git a/dependencies/winx64/lib/libbrotlienc.a b/dependencies/winx64/lib/libbrotlienc.a new file mode 100644 index 0000000..37b2fa4 Binary files /dev/null and b/dependencies/winx64/lib/libbrotlienc.a differ diff --git a/dependencies/winx64/lib/libbz2.a b/dependencies/winx64/lib/libbz2.a new file mode 100644 index 0000000..8672812 Binary files /dev/null and b/dependencies/winx64/lib/libbz2.a differ diff --git a/dependencies/winx64/lib/libfreetype.a b/dependencies/winx64/lib/libfreetype.a new file mode 100644 index 0000000..b3755b7 Binary files /dev/null and b/dependencies/winx64/lib/libfreetype.a differ diff --git a/dependencies/winx64/lib/libharfbuzz-subset.a b/dependencies/winx64/lib/libharfbuzz-subset.a new file mode 100644 index 0000000..91b378a Binary files /dev/null and b/dependencies/winx64/lib/libharfbuzz-subset.a differ diff --git a/dependencies/winx64/lib/libharfbuzz.a b/dependencies/winx64/lib/libharfbuzz.a new file mode 100644 index 0000000..d2cc042 Binary files /dev/null and b/dependencies/winx64/lib/libharfbuzz.a differ diff --git a/dependencies/winx64/lib/libpng.a b/dependencies/winx64/lib/libpng.a new file mode 120000 index 0000000..5671875 --- /dev/null +++ b/dependencies/winx64/lib/libpng.a @@ -0,0 +1 @@ +libpng16.a \ No newline at end of file diff --git a/dependencies/winx64/lib/libpng16.a b/dependencies/winx64/lib/libpng16.a new file mode 100644 index 0000000..02b1d2e Binary files /dev/null and b/dependencies/winx64/lib/libpng16.a differ diff --git a/dependencies/winx64/lib/libz.a b/dependencies/winx64/lib/libz.a new file mode 100644 index 0000000..97cee4c Binary files /dev/null and b/dependencies/winx64/lib/libz.a differ diff --git a/include/amsfontconverter4/amsfontconverter4.hpp b/include/amsfontconverter4/amsfontconverter4.hpp index dd91888..c3aadae 100644 --- a/include/amsfontconverter4/amsfontconverter4.hpp +++ b/include/amsfontconverter4/amsfontconverter4.hpp @@ -48,6 +48,15 @@ class freetype_fontfaceloader //void load_amsface(uint32_t charindmin, uint32_t charindmax, int targetcharheight, amsfontface *fface); }; + + +/////////// +// Tests // +/////////// + +void test_printglyph(amsbitplane *glyph); +void test_getglyph1(); + }; }; diff --git a/src/amsfontconverter4/amsfontconverter4_tests1.cpp b/src/amsfontconverter4/amsfontconverter4_tests1.cpp new file mode 100644 index 0000000..93a33e9 --- /dev/null +++ b/src/amsfontconverter4/amsfontconverter4_tests1.cpp @@ -0,0 +1,49 @@ +#include + +namespace ams +{ +namespace font4 +{ + +void test_printglyph(amsbitplane *glyph) +{ + int I,J; + for(I=0;INy;I++) + { + for(J=0;JNx;J++) + if(glyph->at(J,I)==0) printf("."); + else printf("x"); + printf("\n"); + } +} + + +void test_getglyph1() +{ + int I,J,K; + int charheight = 20; + + freetype_fontfaceloader ftload; + amsbitplane ggg; + amsglyphmetrics gm; + + ftload.open("../inputfonts/FreeMono.ttf"); + + for(I=0;I<512;I++) + { + J = ftload.hasglyph(I); + printf("%d: %d\t",I,J); + if(I%7==0) printf("\n"); + } + + I = 70; + I = 511; + ftload.getglyph((uint32_t) I,(uint32_t) charheight,&ggg,&gm); + gm.print(); + test_printglyph(&ggg); + + ftload.close(); +} + +}; +}; \ No newline at end of file diff --git a/src/main.cpp b/src/main.cpp index 215baf9..349eb10 100644 --- a/src/main.cpp +++ b/src/main.cpp @@ -4,6 +4,6 @@ int main(int argc, char* argv[]) { int ret = 0; printf("ams fontconverter4 tests.\n"); - + ams::font4::test_getglyph1(); return ret; } \ No newline at end of file